summaryrefslogtreecommitdiffstats
path: root/arch/tile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/Kbuild3
-rw-r--r--arch/tile/Kconfig352
-rw-r--r--arch/tile/Kconfig.debug43
-rw-r--r--arch/tile/Makefile52
-rw-r--r--arch/tile/configs/tile_defconfig1289
-rw-r--r--arch/tile/include/arch/abi.h93
-rw-r--r--arch/tile/include/arch/chip.h23
-rw-r--r--arch/tile/include/arch/chip_tile64.h252
-rw-r--r--arch/tile/include/arch/chip_tilepro.h252
-rw-r--r--arch/tile/include/arch/interrupts.h19
-rw-r--r--arch/tile/include/arch/interrupts_32.h304
-rw-r--r--arch/tile/include/arch/sim_def.h512
-rw-r--r--arch/tile/include/arch/spr_def.h19
-rw-r--r--arch/tile/include/arch/spr_def_32.h162
-rw-r--r--arch/tile/include/asm/Kbuild3
-rw-r--r--arch/tile/include/asm/asm-offsets.h1
-rw-r--r--arch/tile/include/asm/atomic.h159
-rw-r--r--arch/tile/include/asm/atomic_32.h353
-rw-r--r--arch/tile/include/asm/auxvec.h20
-rw-r--r--arch/tile/include/asm/backtrace.h193
-rw-r--r--arch/tile/include/asm/bitops.h126
-rw-r--r--arch/tile/include/asm/bitops_32.h132
-rw-r--r--arch/tile/include/asm/bitsperlong.h26
-rw-r--r--arch/tile/include/asm/bug.h1
-rw-r--r--arch/tile/include/asm/bugs.h1
-rw-r--r--arch/tile/include/asm/byteorder.h1
-rw-r--r--arch/tile/include/asm/cache.h50
-rw-r--r--arch/tile/include/asm/cacheflush.h145
-rw-r--r--arch/tile/include/asm/checksum.h24
-rw-r--r--arch/tile/include/asm/compat.h308
-rw-r--r--arch/tile/include/asm/cputime.h1
-rw-r--r--arch/tile/include/asm/current.h31
-rw-r--r--arch/tile/include/asm/delay.h34
-rw-r--r--arch/tile/include/asm/device.h1
-rw-r--r--arch/tile/include/asm/div64.h1
-rw-r--r--arch/tile/include/asm/dma-mapping.h102
-rw-r--r--arch/tile/include/asm/dma.h25
-rw-r--r--arch/tile/include/asm/elf.h169
-rw-r--r--arch/tile/include/asm/emergency-restart.h1
-rw-r--r--arch/tile/include/asm/errno.h1
-rw-r--r--arch/tile/include/asm/fcntl.h1
-rw-r--r--arch/tile/include/asm/fixmap.h124
-rw-r--r--arch/tile/include/asm/ftrace.h20
-rw-r--r--arch/tile/include/asm/futex.h136
-rw-r--r--arch/tile/include/asm/hardirq.h47
-rw-r--r--arch/tile/include/asm/highmem.h73
-rw-r--r--arch/tile/include/asm/homecache.h125
-rw-r--r--arch/tile/include/asm/hugetlb.h109
-rw-r--r--arch/tile/include/asm/hv_driver.h60
-rw-r--r--arch/tile/include/asm/hw_irq.h18
-rw-r--r--arch/tile/include/asm/ide.h25
-rw-r--r--arch/tile/include/asm/io.h279
-rw-r--r--arch/tile/include/asm/ioctl.h1
-rw-r--r--arch/tile/include/asm/ioctls.h1
-rw-r--r--arch/tile/include/asm/ipc.h1
-rw-r--r--arch/tile/include/asm/ipcbuf.h1
-rw-r--r--arch/tile/include/asm/irq.h37
-rw-r--r--arch/tile/include/asm/irq_regs.h1
-rw-r--r--arch/tile/include/asm/irqflags.h267
-rw-r--r--arch/tile/include/asm/kdebug.h1
-rw-r--r--arch/tile/include/asm/kexec.h53
-rw-r--r--arch/tile/include/asm/kmap_types.h43
-rw-r--r--arch/tile/include/asm/linkage.h51
-rw-r--r--arch/tile/include/asm/local.h1
-rw-r--r--arch/tile/include/asm/memprof.h33
-rw-r--r--arch/tile/include/asm/mman.h40
-rw-r--r--arch/tile/include/asm/mmu.h31
-rw-r--r--arch/tile/include/asm/mmu_context.h131
-rw-r--r--arch/tile/include/asm/mmzone.h81
-rw-r--r--arch/tile/include/asm/module.h1
-rw-r--r--arch/tile/include/asm/msgbuf.h1
-rw-r--r--arch/tile/include/asm/mutex.h1
-rw-r--r--arch/tile/include/asm/opcode-tile.h30
-rw-r--r--arch/tile/include/asm/opcode-tile_32.h1597
-rw-r--r--arch/tile/include/asm/opcode-tile_64.h1597
-rw-r--r--arch/tile/include/asm/opcode_constants.h26
-rw-r--r--arch/tile/include/asm/opcode_constants_32.h480
-rw-r--r--arch/tile/include/asm/opcode_constants_64.h480
-rw-r--r--arch/tile/include/asm/page.h334
-rw-r--r--arch/tile/include/asm/param.h1
-rw-r--r--arch/tile/include/asm/pci-bridge.h117
-rw-r--r--arch/tile/include/asm/pci.h128
-rw-r--r--arch/tile/include/asm/percpu.h24
-rw-r--r--arch/tile/include/asm/pgalloc.h119
-rw-r--r--arch/tile/include/asm/pgtable.h475
-rw-r--r--arch/tile/include/asm/pgtable_32.h117
-rw-r--r--arch/tile/include/asm/poll.h1
-rw-r--r--arch/tile/include/asm/posix_types.h1
-rw-r--r--arch/tile/include/asm/processor.h339
-rw-r--r--arch/tile/include/asm/ptrace.h163
-rw-r--r--arch/tile/include/asm/resource.h1
-rw-r--r--arch/tile/include/asm/scatterlist.h22
-rw-r--r--arch/tile/include/asm/sections.h37
-rw-r--r--arch/tile/include/asm/sembuf.h1
-rw-r--r--arch/tile/include/asm/setup.h32
-rw-r--r--arch/tile/include/asm/shmbuf.h1
-rw-r--r--arch/tile/include/asm/shmparam.h1
-rw-r--r--arch/tile/include/asm/sigcontext.h27
-rw-r--r--arch/tile/include/asm/sigframe.h33
-rw-r--r--arch/tile/include/asm/siginfo.h30
-rw-r--r--arch/tile/include/asm/signal.h31
-rw-r--r--arch/tile/include/asm/smp.h126
-rw-r--r--arch/tile/include/asm/socket.h1
-rw-r--r--arch/tile/include/asm/sockios.h1
-rw-r--r--arch/tile/include/asm/spinlock.h24
-rw-r--r--arch/tile/include/asm/spinlock_32.h200
-rw-r--r--arch/tile/include/asm/spinlock_types.h60
-rw-r--r--arch/tile/include/asm/stack.h68
-rw-r--r--arch/tile/include/asm/stat.h1
-rw-r--r--arch/tile/include/asm/statfs.h1
-rw-r--r--arch/tile/include/asm/string.h32
-rw-r--r--arch/tile/include/asm/swab.h29
-rw-r--r--arch/tile/include/asm/syscall.h79
-rw-r--r--arch/tile/include/asm/syscalls.h60
-rw-r--r--arch/tile/include/asm/system.h220
-rw-r--r--arch/tile/include/asm/termbits.h1
-rw-r--r--arch/tile/include/asm/termios.h1
-rw-r--r--arch/tile/include/asm/thread_info.h165
-rw-r--r--arch/tile/include/asm/timex.h47
-rw-r--r--arch/tile/include/asm/tlb.h25
-rw-r--r--arch/tile/include/asm/tlbflush.h128
-rw-r--r--arch/tile/include/asm/topology.h85
-rw-r--r--arch/tile/include/asm/traps.h36
-rw-r--r--arch/tile/include/asm/types.h1
-rw-r--r--arch/tile/include/asm/uaccess.h578
-rw-r--r--arch/tile/include/asm/ucontext.h1
-rw-r--r--arch/tile/include/asm/unaligned.h24
-rw-r--r--arch/tile/include/asm/unistd.h47
-rw-r--r--arch/tile/include/asm/user.h21
-rw-r--r--arch/tile/include/asm/xor.h1
-rw-r--r--arch/tile/include/hv/drv_pcie_rc_intf.h38
-rw-r--r--arch/tile/include/hv/hypervisor.h2366
-rw-r--r--arch/tile/include/hv/syscall_public.h42
-rw-r--r--arch/tile/kernel/Makefile16
-rw-r--r--arch/tile/kernel/asm-offsets.c76
-rw-r--r--arch/tile/kernel/backtrace.c634
-rw-r--r--arch/tile/kernel/compat.c183
-rw-r--r--arch/tile/kernel/compat_signal.c433
-rw-r--r--arch/tile/kernel/early_printk.c109
-rw-r--r--arch/tile/kernel/entry.S141
-rw-r--r--arch/tile/kernel/head_32.S180
-rw-r--r--arch/tile/kernel/hvglue.lds56
-rw-r--r--arch/tile/kernel/init_task.c59
-rw-r--r--arch/tile/kernel/intvec_32.S2006
-rw-r--r--arch/tile/kernel/irq.c227
-rw-r--r--arch/tile/kernel/machine_kexec.c291
-rw-r--r--arch/tile/kernel/messaging.c115
-rw-r--r--arch/tile/kernel/module.c257
-rw-r--r--arch/tile/kernel/pci-dma.c252
-rw-r--r--arch/tile/kernel/proc.c91
-rw-r--r--arch/tile/kernel/process.c647
-rw-r--r--arch/tile/kernel/ptrace.c203
-rw-r--r--arch/tile/kernel/reboot.c52
-rw-r--r--arch/tile/kernel/regs_32.S145
-rw-r--r--arch/tile/kernel/relocate_kernel.S280
-rw-r--r--arch/tile/kernel/setup.c1497
-rw-r--r--arch/tile/kernel/signal.c359
-rw-r--r--arch/tile/kernel/single_step.c656
-rw-r--r--arch/tile/kernel/smp.c202
-rw-r--r--arch/tile/kernel/smpboot.c293
-rw-r--r--arch/tile/kernel/stack.c485
-rw-r--r--arch/tile/kernel/sys.c122
-rw-r--r--arch/tile/kernel/tile-desc_32.c13826
-rw-r--r--arch/tile/kernel/time.c220
-rw-r--r--arch/tile/kernel/tlb.c97
-rw-r--r--arch/tile/kernel/traps.c237
-rw-r--r--arch/tile/kernel/vmlinux.lds.S98
-rw-r--r--arch/tile/lib/Makefile16
-rw-r--r--arch/tile/lib/__invalidate_icache.S106
-rw-r--r--arch/tile/lib/atomic_32.c347
-rw-r--r--arch/tile/lib/atomic_asm_32.S197
-rw-r--r--arch/tile/lib/checksum.c102
-rw-r--r--arch/tile/lib/cpumask.c51
-rw-r--r--arch/tile/lib/delay.c34
-rw-r--r--arch/tile/lib/exports.c78
-rw-r--r--arch/tile/lib/mb_incoherent.S34
-rw-r--r--arch/tile/lib/memchr_32.c68
-rw-r--r--arch/tile/lib/memcpy_32.S628
-rw-r--r--arch/tile/lib/memcpy_tile64.c271
-rw-r--r--arch/tile/lib/memmove_32.c63
-rw-r--r--arch/tile/lib/memset_32.c274
-rw-r--r--arch/tile/lib/spinlock_32.c221
-rw-r--r--arch/tile/lib/spinlock_common.h64
-rw-r--r--arch/tile/lib/strchr_32.c66
-rw-r--r--arch/tile/lib/strlen_32.c36
-rw-r--r--arch/tile/lib/uaccess.c31
-rw-r--r--arch/tile/lib/usercopy_32.S223
-rw-r--r--arch/tile/mm/Makefile9
-rw-r--r--arch/tile/mm/elf.c164
-rw-r--r--arch/tile/mm/extable.c30
-rw-r--r--arch/tile/mm/fault.c905
-rw-r--r--arch/tile/mm/highmem.c328
-rw-r--r--arch/tile/mm/homecache.c445
-rw-r--r--arch/tile/mm/hugetlbpage.c343
-rw-r--r--arch/tile/mm/init.c1082
-rw-r--r--arch/tile/mm/migrate.h50
-rw-r--r--arch/tile/mm/migrate_32.S211
-rw-r--r--arch/tile/mm/mmap.c75
-rw-r--r--arch/tile/mm/pgtable.c566
199 files changed, 49495 insertions, 0 deletions
diff --git a/arch/tile/Kbuild b/arch/tile/Kbuild
new file mode 100644
index 000000000000..a9b922716092
--- /dev/null
+++ b/arch/tile/Kbuild
@@ -0,0 +1,3 @@
+
+obj-y += kernel/
+obj-y += mm/
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
new file mode 100644
index 000000000000..290ef4161939
--- /dev/null
+++ b/arch/tile/Kconfig
@@ -0,0 +1,352 @@
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/config-language.txt.
+
+config MMU
+ def_bool y
+
+config GENERIC_CSUM
+ def_bool y
+
+config GENERIC_HARDIRQS
+ def_bool y
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
+config GENERIC_IRQ_PROBE
+ def_bool y
+
+config GENERIC_PENDING_IRQ
+ def_bool y
+ depends on GENERIC_HARDIRQS && SMP
+
+config SEMAPHORE_SLEEPERS
+ def_bool y
+
+config HAVE_ARCH_ALLOC_REMAP
+ def_bool y
+
+config HAVE_SETUP_PER_CPU_AREA
+ def_bool y
+
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+ def_bool y
+
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+
+config GENERIC_TIME
+ def_bool y
+
+config GENERIC_CLOCKEVENTS
+ def_bool y
+
+# FIXME: tilegx can implement a more efficent rwsem.
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+# We have a very flat architecture from a migration point of view,
+# so save boot time by presetting this (particularly useful on tile-sim).
+config DEFAULT_MIGRATION_COST
+ int
+ default "10000000"
+
+# We only support gcc 4.4 and above, so this should work.
+config ARCH_SUPPORTS_OPTIMIZED_INLINING
+ def_bool y
+
+config ARCH_PHYS_ADDR_T_64BIT
+ def_bool y
+
+config LOCKDEP_SUPPORT
+ def_bool y
+
+config STACKTRACE_SUPPORT
+ def_bool y
+ select STACKTRACE
+
+# We use discontigmem for now; at some point we may want to switch
+# to sparsemem (Tilera bug 7996).
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+config STRICT_DEVMEM
+ def_bool y
+
+# SMP is required for Tilera Linux.
+config SMP
+ def_bool y
+
+# Allow checking for compile-time determined overflow errors in
+# copy_from_user(). There are still unprovable places in the
+# generic code as of 2.6.34, so this option is not really compatible
+# with -Werror, which is more useful in general.
+config DEBUG_COPY_FROM_USER
+ def_bool n
+
+config HVC_TILE
+ select HVC_DRIVER
+ def_bool y
+
+config TILE
+ def_bool y
+ select GENERIC_FIND_FIRST_BIT
+ select GENERIC_FIND_NEXT_BIT
+ select USE_GENERIC_SMP_HELPERS
+ select CC_OPTIMIZE_FOR_SIZE
+
+# FIXME: investigate whether we need/want these options.
+# select HAVE_IOREMAP_PROT
+# select HAVE_OPTPROBES
+# select HAVE_REGS_AND_STACK_ACCESS_API
+# select HAVE_HW_BREAKPOINT
+# select PERF_EVENTS
+# select HAVE_USER_RETURN_NOTIFIER
+# config NO_BOOTMEM
+# config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+# config HUGETLB_PAGE_SIZE_VARIABLE
+
+
+mainmenu "Linux/TILE Kernel Configuration"
+
+# Please note: TILE-Gx support is not yet finalized; this is
+# the preliminary support. TILE-Gx drivers are only provided
+# with the alpha or beta test versions for Tilera customers.
+config TILEGX
+ depends on EXPERIMENTAL
+ bool "Building with TILE-Gx (64-bit) compiler and toolchain"
+
+config 64BIT
+ depends on TILEGX
+ def_bool y
+
+config ARCH_DEFCONFIG
+ string
+ default "arch/tile/configs/tile_defconfig" if !TILEGX
+ default "arch/tile/configs/tilegx_defconfig" if TILEGX
+
+source "init/Kconfig"
+
+menu "Tilera-specific configuration"
+
+config NR_CPUS
+ int "Maximum number of tiles (2-255)"
+ range 2 255
+ depends on SMP
+ default "64"
+ ---help---
+ Building with 64 is the recommended value, but a slightly
+ smaller kernel memory footprint results from using a smaller
+ value on chips with fewer tiles.
+
+source "kernel/time/Kconfig"
+
+source "kernel/Kconfig.hz"
+
+config KEXEC
+ bool "kexec system call"
+ ---help---
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is independent of the system firmware. It is used
+ to implement the "mboot" Tilera booter.
+
+ The name comes from the similarity to the exec system call.
+
+config COMPAT
+ bool "Support 32-bit TILE-Gx binaries in addition to 64-bit"
+ depends on TILEGX
+ select COMPAT_BINFMT_ELF
+ default y
+ ---help---
+ If enabled, the kernel will support running TILE-Gx binaries
+ that were built with the -m32 option.
+
+config SYSVIPC_COMPAT
+ def_bool y
+ depends on COMPAT && SYSVIPC
+
+# We do not currently support disabling HIGHMEM on tile64 and tilepro.
+config HIGHMEM
+ bool # "Support for more than 512 MB of RAM"
+ default !TILEGX
+ ---help---
+ Linux can use the full amount of RAM in the system by
+ default. However, the address space of TILE processors is
+ only 4 Gigabytes large. That means that, if you have a large
+ amount of physical memory, not all of it can be "permanently
+ mapped" by the kernel. The physical memory that's not
+ permanently mapped is called "high memory".
+
+ If you are compiling a kernel which will never run on a
+ machine with more than 512 MB total physical RAM, answer
+ "false" here. This will result in the kernel mapping all of
+ physical memory into the top 1 GB of virtual memory space.
+
+ If unsure, say "true".
+
+# We do not currently support disabling NUMA.
+config NUMA
+ bool # "NUMA Memory Allocation and Scheduler Support"
+ depends on SMP && DISCONTIGMEM
+ default y
+ ---help---
+ NUMA memory allocation is required for TILE processors
+ unless booting with memory striping enabled in the
+ hypervisor, or with only a single memory controller.
+ It is recommended that this option always be enabled.
+
+config NODES_SHIFT
+ int "Log base 2 of the max number of memory controllers"
+ default 2
+ depends on NEED_MULTIPLE_NODES
+ ---help---
+ By default, 2, i.e. 2^2 == 4 DDR2 controllers.
+ In a system with more controllers, this value should be raised.
+
+# Need 16MB areas to enable hugetlb
+# See build-time check in arch/tile/mm/init.c.
+config FORCE_MAX_ZONEORDER
+ int
+ default 9
+
+choice
+ depends on !TILEGX
+ prompt "Memory split" if EMBEDDED
+ default VMSPLIT_3G
+ ---help---
+ Select the desired split between kernel and user memory.
+
+ If the address range available to the kernel is less than the
+ physical memory installed, the remaining memory will be available
+ as "high memory". Accessing high memory is a little more costly
+ than low memory, as it needs to be mapped into the kernel first.
+ Note that increasing the kernel address space limits the range
+ available to user programs, making the address space there
+ tighter. Selecting anything other than the default 3G/1G split
+ will also likely make your kernel incompatible with binary-only
+ kernel modules.
+
+ If you are not absolutely sure what you are doing, leave this
+ option alone!
+
+ config VMSPLIT_375G
+ bool "3.75G/0.25G user/kernel split (no kernel networking)"
+ config VMSPLIT_35G
+ bool "3.5G/0.5G user/kernel split"
+ config VMSPLIT_3G
+ bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
+ config VMSPLIT_2G
+ bool "2G/2G user/kernel split"
+ config VMSPLIT_1G
+ bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+ hex
+ default 0xF0000000 if VMSPLIT_375G
+ default 0xE0000000 if VMSPLIT_35G
+ default 0xB0000000 if VMSPLIT_3G_OPT
+ default 0x80000000 if VMSPLIT_2G
+ default 0x40000000 if VMSPLIT_1G
+ default 0xC0000000
+
+source "mm/Kconfig"
+
+config CMDLINE_BOOL
+ bool "Built-in kernel command line"
+ default n
+ ---help---
+ Allow for specifying boot arguments to the kernel at
+ build time. On some systems (e.g. embedded ones), it is
+ necessary or convenient to provide some or all of the
+ kernel boot arguments with the kernel itself (that is,
+ to not rely on the boot loader to provide them.)
+
+ To compile command line arguments into the kernel,
+ set this option to 'Y', then fill in the
+ the boot arguments in CONFIG_CMDLINE.
+
+ Systems with fully functional boot loaders (e.g. mboot, or
+ if booting over PCI) should leave this option set to 'N'.
+
+config CMDLINE
+ string "Built-in kernel command string"
+ depends on CMDLINE_BOOL
+ default ""
+ ---help---
+ Enter arguments here that should be compiled into the kernel
+ image and used at boot time. If the boot loader provides a
+ command line at boot time, it is appended to this string to
+ form the full kernel command line, when the system boots.
+
+ However, you can use the CONFIG_CMDLINE_OVERRIDE option to
+ change this behavior.
+
+ In most cases, the command line (whether built-in or provided
+ by the boot loader) should specify the device for the root
+ file system.
+
+config CMDLINE_OVERRIDE
+ bool "Built-in command line overrides boot loader arguments"
+ default n
+ depends on CMDLINE_BOOL
+ ---help---
+ Set this option to 'Y' to have the kernel ignore the boot loader
+ command line, and use ONLY the built-in command line.
+
+ This is used to work around broken boot loaders. This should
+ be set to 'N' under normal conditions.
+
+config VMALLOC_RESERVE
+ hex
+ default 0x1000000
+
+endmenu # Tilera-specific configuration
+
+menu "Bus options"
+
+config NO_IOMEM
+ def_bool !PCI
+
+config NO_IOPORT
+ def_bool !PCI
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+# only elf supported
+config KCORE_ELF
+ def_bool y
+ depends on PROC_FS
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/tile/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug
new file mode 100644
index 000000000000..a81f0fbf7e60
--- /dev/null
+++ b/arch/tile/Kconfig.debug
@@ -0,0 +1,43 @@
+menu "Kernel hacking"
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ default y
+ help
+ Write kernel log output directly via the hypervisor console.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd. You should normally N here,
+ unless you want to debug such a crash.
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+ help
+ This option will cause messages to be printed if free stack space
+ drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+config DEBUG_EXTRA_FLAGS
+ string "Additional compiler arguments when building with '-g'"
+ depends on DEBUG_INFO
+ default ""
+ help
+ Debug info can be large, and flags like
+ `-femit-struct-debug-baseonly' can reduce the kernel file
+ size and build time noticeably. Such flags are often
+ helpful if the main use of debug info is line number info.
+
+endmenu
diff --git a/arch/tile/Makefile b/arch/tile/Makefile
new file mode 100644
index 000000000000..07c4318c0629
--- /dev/null
+++ b/arch/tile/Makefile
@@ -0,0 +1,52 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" and "archdep" for cleaning up and making dependencies for
+# this architecture
+
+ifeq ($(CROSS_COMPILE),)
+# If building with TILERA_ROOT set (i.e. using the Tilera Multicore
+# Development Environment) we can set CROSS_COMPILE based on that.
+ifdef TILERA_ROOT
+CROSS_COMPILE = $(TILERA_ROOT)/bin/tile-
+endif
+endif
+
+# If we're not cross-compiling, make sure we're on the right architecture.
+ifeq ($(CROSS_COMPILE),)
+HOST_ARCH = $(shell uname -m)
+ifneq ($(HOST_ARCH),$(ARCH))
+$(error Set TILERA_ROOT or CROSS_COMPILE when building $(ARCH) on $(HOST_ARCH))
+endif
+endif
+
+
+KBUILD_CFLAGS += $(CONFIG_DEBUG_EXTRA_FLAGS)
+
+LIBGCC_PATH := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+# Provide the path to use for "make defconfig".
+KBUILD_DEFCONFIG := $(ARCH)_defconfig
+
+# Used as a file extension when useful, e.g. head_$(BITS).o
+# Not needed for (e.g.) "$(CC) -m32" since the compiler automatically
+# uses the right default anyway.
+export BITS
+ifeq ($(CONFIG_TILEGX),y)
+BITS := 64
+else
+BITS := 32
+endif
+
+head-y := arch/tile/kernel/head_$(BITS).o
+
+libs-y += arch/tile/lib/
+libs-y += $(LIBGCC_PATH)
+
+
+# See arch/tile/Kbuild for content of core part of the kernel
+core-y += arch/tile/
diff --git a/arch/tile/configs/tile_defconfig b/arch/tile/configs/tile_defconfig
new file mode 100644
index 000000000000..74a5be39e8f2
--- /dev/null
+++ b/arch/tile/configs/tile_defconfig
@@ -0,0 +1,1289 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.34
+# Fri May 28 17:51:43 2010
+#
+CONFIG_MMU=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_HAVE_ARCH_ALLOC_REMAP=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_DEFAULT_MIGRATION_COST=10000000
+CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_SMP=y
+CONFIG_WERROR=y
+# CONFIG_DEBUG_COPY_FROM_USER is not set
+CONFIG_SERIAL_CONSOLE=y
+CONFIG_HVC_TILE=y
+CONFIG_TILE=y
+# CONFIG_TILEGX is not set
+CONFIG_ARCH_DEFCONFIG="arch/tile/configs/tile_defconfig"
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_RCU_FAST_NO_HZ is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="usr/contents.txt"
+CONFIG_INITRAMFS_ROOT_UID=0
+CONFIG_INITRAMFS_ROOT_GID=0
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
+CONFIG_INITRAMFS_COMPRESSION_NONE=y
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZO is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+
+#
+# Tilera-specific configuration
+#
+CONFIG_NR_CPUS=64
+CONFIG_HOMECACHE=y
+CONFIG_DATAPLANE=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_KEXEC is not set
+CONFIG_HIGHMEM=y
+CONFIG_NUMA=y
+CONFIG_NODES_SHIFT=2
+CONFIG_FORCE_MAX_ZONEORDER=9
+# CONFIG_VMSPLIT_375G is not set
+# CONFIG_VMSPLIT_35G is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_FEEDBACK_COLLECT is not set
+CONFIG_FEEDBACK_USE=""
+# CONFIG_HUGEVMAP is not set
+CONFIG_VMALLOC_RESERVE=0x1000000
+CONFIG_HARDWALL=y
+CONFIG_MEMPROF=y
+CONFIG_XGBE_MAIN=y
+CONFIG_NET_TILE=y
+CONFIG_PSEUDO_NAPI=y
+CONFIG_TILEPCI_ENDP=y
+CONFIG_TILE_IDE_GPIO=y
+CONFIG_TILE_SOFTUART=y
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_DEBUG=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_KCORE_ELF=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_SIT_6RD is not set
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+
+#
+# SCSI device support
+#
+CONFIG_SCSI_MOD=y
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_HPSA is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_3W_SAS is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_PM8001 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_TOSHIBA is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# The newer stack is recommended.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+CONFIG_E1000E=y
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_VMXNET3 is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_TIMBERDALE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_HVC_DRIVER=y
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_LPC_SCH is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGA_ARB is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_RING_BUFFER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_SAMPLES is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_EXTRA_FLAGS="-femit-struct-debug-baseonly"
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_PCRYPT is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/tile/include/arch/abi.h b/arch/tile/include/arch/abi.h
new file mode 100644
index 000000000000..7cdc47b3e02a
--- /dev/null
+++ b/arch/tile/include/arch/abi.h
@@ -0,0 +1,93 @@
+// Copyright 2010 Tilera Corporation. All Rights Reserved.
+//
+// This program is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License
+// as published by the Free Software Foundation, version 2.
+//
+// This program is distributed in the hope that it will be useful, but
+// WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+// NON INFRINGEMENT. See the GNU General Public License for
+// more details.
+
+//! @file
+//!
+//! ABI-related register definitions helpful when writing assembly code.
+//!
+
+#ifndef __ARCH_ABI_H__
+#define __ARCH_ABI_H__
+
+#include <arch/chip.h>
+
+// Registers 0 - 55 are "normal", but some perform special roles.
+
+#define TREG_FP 52 /**< Frame pointer. */
+#define TREG_TP 53 /**< Thread pointer. */
+#define TREG_SP 54 /**< Stack pointer. */
+#define TREG_LR 55 /**< Link to calling function PC. */
+
+/** Index of last normal general-purpose register. */
+#define TREG_LAST_GPR 55
+
+// Registers 56 - 62 are "special" network registers.
+
+#define TREG_SN 56 /**< Static network access. */
+#define TREG_IDN0 57 /**< IDN demux 0 access. */
+#define TREG_IDN1 58 /**< IDN demux 1 access. */
+#define TREG_UDN0 59 /**< UDN demux 0 access. */
+#define TREG_UDN1 60 /**< UDN demux 1 access. */
+#define TREG_UDN2 61 /**< UDN demux 2 access. */
+#define TREG_UDN3 62 /**< UDN demux 3 access. */
+
+// Register 63 is the "special" zero register.
+
+#define TREG_ZERO 63 /**< "Zero" register; always reads as "0". */
+
+
+/** By convention, this register is used to hold the syscall number. */
+#define TREG_SYSCALL_NR 10
+
+/** Name of register that holds the syscall number, for use in assembly. */
+#define TREG_SYSCALL_NR_NAME r10
+
+
+//! The ABI requires callers to allocate a caller state save area of
+//! this many bytes at the bottom of each stack frame.
+//!
+#ifdef __tile__
+#define C_ABI_SAVE_AREA_SIZE (2 * __SIZEOF_POINTER__)
+#endif
+
+//! The operand to an 'info' opcode directing the backtracer to not
+//! try to find the calling frame.
+//!
+#define INFO_OP_CANNOT_BACKTRACE 2
+
+#ifndef __ASSEMBLER__
+#if CHIP_WORD_SIZE() > 32
+
+//! Unsigned type that can hold a register.
+typedef unsigned long long uint_reg_t;
+
+//! Signed type that can hold a register.
+typedef long long int_reg_t;
+
+//! String prefix to use for printf().
+#define INT_REG_FMT "ll"
+
+#elif !defined(__LP64__) /* avoid confusion with LP64 cross-build tools */
+
+//! Unsigned type that can hold a register.
+typedef unsigned long uint_reg_t;
+
+//! Signed type that can hold a register.
+typedef long int_reg_t;
+
+//! String prefix to use for printf().
+#define INT_REG_FMT "l"
+
+#endif
+#endif /* __ASSEMBLER__ */
+
+#endif // !__ARCH_ABI_H__
diff --git a/arch/tile/include/arch/chip.h b/arch/tile/include/arch/chip.h
new file mode 100644
index 000000000000..926d3db0e91e
--- /dev/null
+++ b/arch/tile/include/arch/chip.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#if __tile_chip__ == 0
+#include <arch/chip_tile64.h>
+#elif __tile_chip__ == 1
+#include <arch/chip_tilepro.h>
+#elif defined(__tilegx__)
+#include <arch/chip_tilegx.h>
+#else
+#error Unexpected Tilera chip type
+#endif
diff --git a/arch/tile/include/arch/chip_tile64.h b/arch/tile/include/arch/chip_tile64.h
new file mode 100644
index 000000000000..18b5bc8e563f
--- /dev/null
+++ b/arch/tile/include/arch/chip_tile64.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/*
+ * @file
+ * Global header file.
+ * This header file specifies defines for TILE64.
+ */
+
+#ifndef __ARCH_CHIP_H__
+#define __ARCH_CHIP_H__
+
+/** Specify chip version.
+ * When possible, prefer the CHIP_xxx symbols below for future-proofing.
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip__ symbol.
+ */
+#define TILE_CHIP 0
+
+/** Specify chip revision.
+ * This provides for the case of a respin of a particular chip type;
+ * the normal value for this symbol is "0".
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip_rev__ symbol.
+ */
+#define TILE_CHIP_REV 0
+
+/** The name of this architecture. */
+#define CHIP_ARCH_NAME "tile64"
+
+/** The ELF e_machine type for binaries for this chip. */
+#define CHIP_ELF_TYPE() EM_TILE64
+
+/** The alternate ELF e_machine type for binaries for this chip. */
+#define CHIP_COMPAT_ELF_TYPE() 0x2506
+
+/** What is the native word size of the machine? */
+#define CHIP_WORD_SIZE() 32
+
+/** How many bits of a virtual address are used. Extra bits must be
+ * the sign extension of the low bits.
+ */
+#define CHIP_VA_WIDTH() 32
+
+/** How many bits are in a physical address? */
+#define CHIP_PA_WIDTH() 36
+
+/** Size of the L2 cache, in bytes. */
+#define CHIP_L2_CACHE_SIZE() 65536
+
+/** Log size of an L2 cache line in bytes. */
+#define CHIP_L2_LOG_LINE_SIZE() 6
+
+/** Size of an L2 cache line, in bytes. */
+#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE())
+
+/** Associativity of the L2 cache. */
+#define CHIP_L2_ASSOC() 2
+
+/** Size of the L1 data cache, in bytes. */
+#define CHIP_L1D_CACHE_SIZE() 8192
+
+/** Log size of an L1 data cache line in bytes. */
+#define CHIP_L1D_LOG_LINE_SIZE() 4
+
+/** Size of an L1 data cache line, in bytes. */
+#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE())
+
+/** Associativity of the L1 data cache. */
+#define CHIP_L1D_ASSOC() 2
+
+/** Size of the L1 instruction cache, in bytes. */
+#define CHIP_L1I_CACHE_SIZE() 8192
+
+/** Log size of an L1 instruction cache line in bytes. */
+#define CHIP_L1I_LOG_LINE_SIZE() 6
+
+/** Size of an L1 instruction cache line, in bytes. */
+#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE())
+
+/** Associativity of the L1 instruction cache. */
+#define CHIP_L1I_ASSOC() 1
+
+/** Stride with which flush instructions must be issued. */
+#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which inv instructions must be issued. */
+#define CHIP_INV_STRIDE() CHIP_L1D_LINE_SIZE()
+
+/** Stride with which finv instructions must be issued. */
+#define CHIP_FINV_STRIDE() CHIP_L1D_LINE_SIZE()
+
+/** Can the local cache coherently cache data that is homed elsewhere? */
+#define CHIP_HAS_COHERENT_LOCAL_CACHE() 0
+
+/** How many simultaneous outstanding victims can the L2 cache have? */
+#define CHIP_MAX_OUTSTANDING_VICTIMS() 2
+
+/** Does the TLB support the NC and NOALLOC bits? */
+#define CHIP_HAS_NC_AND_NOALLOC_BITS() 0
+
+/** Does the chip support hash-for-home caching? */
+#define CHIP_HAS_CBOX_HOME_MAP() 0
+
+/** Number of entries in the chip's home map tables. */
+/* #define CHIP_CBOX_HOME_MAP_SIZE() -- does not apply to chip 0 */
+
+/** Do uncacheable requests miss in the cache regardless of whether
+ * there is matching data? */
+#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 0
+
+/** Does the mf instruction wait for victims? */
+#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 1
+
+/** Does the chip have an "inv" instruction that doesn't also flush? */
+#define CHIP_HAS_INV() 0
+
+/** Does the chip have a "wh64" instruction? */
+#define CHIP_HAS_WH64() 0
+
+/** Does this chip have a 'dword_align' instruction? */
+#define CHIP_HAS_DWORD_ALIGN() 0
+
+/** Number of performance counters. */
+#define CHIP_PERFORMANCE_COUNTERS() 2
+
+/** Does this chip have auxiliary performance counters? */
+#define CHIP_HAS_AUX_PERF_COUNTERS() 0
+
+/** Is the CBOX_MSR1 SPR supported? */
+#define CHIP_HAS_CBOX_MSR1() 0
+
+/** Is the TILE_RTF_HWM SPR supported? */
+#define CHIP_HAS_TILE_RTF_HWM() 0
+
+/** Is the TILE_WRITE_PENDING SPR supported? */
+#define CHIP_HAS_TILE_WRITE_PENDING() 0
+
+/** Is the PROC_STATUS SPR supported? */
+#define CHIP_HAS_PROC_STATUS_SPR() 0
+
+/** Log of the number of mshims we have. */
+#define CHIP_LOG_NUM_MSHIMS() 2
+
+/** Are the bases of the interrupt vector areas fixed? */
+#define CHIP_HAS_FIXED_INTVEC_BASE() 1
+
+/** Are the interrupt masks split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_INTR_MASK() 1
+
+/** Is the cycle count split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_CYCLE() 1
+
+/** Does the chip have a static network? */
+#define CHIP_HAS_SN() 1
+
+/** Does the chip have a static network processor? */
+#define CHIP_HAS_SN_PROC() 1
+
+/** Size of the L1 static network processor instruction cache, in bytes. */
+#define CHIP_L1SNI_CACHE_SIZE() 2048
+
+/** Does the chip have DMA support in each tile? */
+#define CHIP_HAS_TILE_DMA() 1
+
+/** Does the chip have the second revision of the directly accessible
+ * dynamic networks? This encapsulates a number of characteristics,
+ * including the absence of the catch-all, the absence of inline message
+ * tags, the absence of support for network context-switching, and so on.
+ */
+#define CHIP_HAS_REV1_XDN() 0
+
+/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */
+#define CHIP_HAS_CMPEXCH() 0
+
+/** Does the chip have memory-mapped I/O support? */
+#define CHIP_HAS_MMIO() 0
+
+/** Does the chip have post-completion interrupts? */
+#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0
+
+/** Does the chip have native single step support? */
+#define CHIP_HAS_SINGLE_STEP() 0
+
+#ifndef __OPEN_SOURCE__ /* features only relevant to hypervisor-level code */
+
+/** How many entries are present in the instruction TLB? */
+#define CHIP_ITLB_ENTRIES() 8
+
+/** How many entries are present in the data TLB? */
+#define CHIP_DTLB_ENTRIES() 16
+
+/** How many MAF entries does the XAUI shim have? */
+#define CHIP_XAUI_MAF_ENTRIES() 16
+
+/** Does the memory shim have a source-id table? */
+#define CHIP_HAS_MSHIM_SRCID_TABLE() 1
+
+/** Does the L1 instruction cache clear on reset? */
+#define CHIP_HAS_L1I_CLEAR_ON_RESET() 0
+
+/** Does the chip come out of reset with valid coordinates on all tiles?
+ * Note that if defined, this also implies that the upper left is 1,1.
+ */
+#define CHIP_HAS_VALID_TILE_COORD_RESET() 0
+
+/** Does the chip have unified packet formats? */
+#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 0
+
+/** Does the chip support write reordering? */
+#define CHIP_HAS_WRITE_REORDERING() 0
+
+/** Does the chip support Y-X routing as well as X-Y? */
+#define CHIP_HAS_Y_X_ROUTING() 0
+
+/** Is INTCTRL_3 managed with the correct MPL? */
+#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 0
+
+/** Is it possible to configure the chip to be big-endian? */
+#define CHIP_HAS_BIG_ENDIAN_CONFIG() 0
+
+/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */
+#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 0
+
+/** Is the DIAG_TRACE_WAY SPR supported? */
+#define CHIP_HAS_DIAG_TRACE_WAY() 0
+
+/** Is the MEM_STRIPE_CONFIG SPR supported? */
+#define CHIP_HAS_MEM_STRIPE_CONFIG() 0
+
+/** Are the TLB_PERF SPRs supported? */
+#define CHIP_HAS_TLB_PERF() 0
+
+/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */
+#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 0
+
+/** Does the chip support rev1 DMA packets? */
+#define CHIP_HAS_REV1_DMA_PACKETS() 0
+
+#endif /* !__OPEN_SOURCE__ */
+#endif /* __ARCH_CHIP_H__ */
diff --git a/arch/tile/include/arch/chip_tilepro.h b/arch/tile/include/arch/chip_tilepro.h
new file mode 100644
index 000000000000..9852af163862
--- /dev/null
+++ b/arch/tile/include/arch/chip_tilepro.h
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/*
+ * @file
+ * Global header file.
+ * This header file specifies defines for TILEPro.
+ */
+
+#ifndef __ARCH_CHIP_H__
+#define __ARCH_CHIP_H__
+
+/** Specify chip version.
+ * When possible, prefer the CHIP_xxx symbols below for future-proofing.
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip__ symbol.
+ */
+#define TILE_CHIP 1
+
+/** Specify chip revision.
+ * This provides for the case of a respin of a particular chip type;
+ * the normal value for this symbol is "0".
+ * This is intended for cross-compiling; native compilation should
+ * use the predefined __tile_chip_rev__ symbol.
+ */
+#define TILE_CHIP_REV 0
+
+/** The name of this architecture. */
+#define CHIP_ARCH_NAME "tilepro"
+
+/** The ELF e_machine type for binaries for this chip. */
+#define CHIP_ELF_TYPE() EM_TILEPRO
+
+/** The alternate ELF e_machine type for binaries for this chip. */
+#define CHIP_COMPAT_ELF_TYPE() 0x2507
+
+/** What is the native word size of the machine? */
+#define CHIP_WORD_SIZE() 32
+
+/** How many bits of a virtual address are used. Extra bits must be
+ * the sign extension of the low bits.
+ */
+#define CHIP_VA_WIDTH() 32
+
+/** How many bits are in a physical address? */
+#define CHIP_PA_WIDTH() 36
+
+/** Size of the L2 cache, in bytes. */
+#define CHIP_L2_CACHE_SIZE() 65536
+
+/** Log size of an L2 cache line in bytes. */
+#define CHIP_L2_LOG_LINE_SIZE() 6
+
+/** Size of an L2 cache line, in bytes. */
+#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE())
+
+/** Associativity of the L2 cache. */
+#define CHIP_L2_ASSOC() 4
+
+/** Size of the L1 data cache, in bytes. */
+#define CHIP_L1D_CACHE_SIZE() 8192
+
+/** Log size of an L1 data cache line in bytes. */
+#define CHIP_L1D_LOG_LINE_SIZE() 4
+
+/** Size of an L1 data cache line, in bytes. */
+#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE())
+
+/** Associativity of the L1 data cache. */
+#define CHIP_L1D_ASSOC() 2
+
+/** Size of the L1 instruction cache, in bytes. */
+#define CHIP_L1I_CACHE_SIZE() 16384
+
+/** Log size of an L1 instruction cache line in bytes. */
+#define CHIP_L1I_LOG_LINE_SIZE() 6
+
+/** Size of an L1 instruction cache line, in bytes. */
+#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE())
+
+/** Associativity of the L1 instruction cache. */
+#define CHIP_L1I_ASSOC() 1
+
+/** Stride with which flush instructions must be issued. */
+#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which inv instructions must be issued. */
+#define CHIP_INV_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Stride with which finv instructions must be issued. */
+#define CHIP_FINV_STRIDE() CHIP_L2_LINE_SIZE()
+
+/** Can the local cache coherently cache data that is homed elsewhere? */
+#define CHIP_HAS_COHERENT_LOCAL_CACHE() 1
+
+/** How many simultaneous outstanding victims can the L2 cache have? */
+#define CHIP_MAX_OUTSTANDING_VICTIMS() 4
+
+/** Does the TLB support the NC and NOALLOC bits? */
+#define CHIP_HAS_NC_AND_NOALLOC_BITS() 1
+
+/** Does the chip support hash-for-home caching? */
+#define CHIP_HAS_CBOX_HOME_MAP() 1
+
+/** Number of entries in the chip's home map tables. */
+#define CHIP_CBOX_HOME_MAP_SIZE() 64
+
+/** Do uncacheable requests miss in the cache regardless of whether
+ * there is matching data? */
+#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 1
+
+/** Does the mf instruction wait for victims? */
+#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 0
+
+/** Does the chip have an "inv" instruction that doesn't also flush? */
+#define CHIP_HAS_INV() 1
+
+/** Does the chip have a "wh64" instruction? */
+#define CHIP_HAS_WH64() 1
+
+/** Does this chip have a 'dword_align' instruction? */
+#define CHIP_HAS_DWORD_ALIGN() 1
+
+/** Number of performance counters. */
+#define CHIP_PERFORMANCE_COUNTERS() 4
+
+/** Does this chip have auxiliary performance counters? */
+#define CHIP_HAS_AUX_PERF_COUNTERS() 1
+
+/** Is the CBOX_MSR1 SPR supported? */
+#define CHIP_HAS_CBOX_MSR1() 1
+
+/** Is the TILE_RTF_HWM SPR supported? */
+#define CHIP_HAS_TILE_RTF_HWM() 1
+
+/** Is the TILE_WRITE_PENDING SPR supported? */
+#define CHIP_HAS_TILE_WRITE_PENDING() 1
+
+/** Is the PROC_STATUS SPR supported? */
+#define CHIP_HAS_PROC_STATUS_SPR() 1
+
+/** Log of the number of mshims we have. */
+#define CHIP_LOG_NUM_MSHIMS() 2
+
+/** Are the bases of the interrupt vector areas fixed? */
+#define CHIP_HAS_FIXED_INTVEC_BASE() 1
+
+/** Are the interrupt masks split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_INTR_MASK() 1
+
+/** Is the cycle count split up into 2 SPRs? */
+#define CHIP_HAS_SPLIT_CYCLE() 1
+
+/** Does the chip have a static network? */
+#define CHIP_HAS_SN() 1
+
+/** Does the chip have a static network processor? */
+#define CHIP_HAS_SN_PROC() 0
+
+/** Size of the L1 static network processor instruction cache, in bytes. */
+/* #define CHIP_L1SNI_CACHE_SIZE() -- does not apply to chip 1 */
+
+/** Does the chip have DMA support in each tile? */
+#define CHIP_HAS_TILE_DMA() 1
+
+/** Does the chip have the second revision of the directly accessible
+ * dynamic networks? This encapsulates a number of characteristics,
+ * including the absence of the catch-all, the absence of inline message
+ * tags, the absence of support for network context-switching, and so on.
+ */
+#define CHIP_HAS_REV1_XDN() 0
+
+/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */
+#define CHIP_HAS_CMPEXCH() 0
+
+/** Does the chip have memory-mapped I/O support? */
+#define CHIP_HAS_MMIO() 0
+
+/** Does the chip have post-completion interrupts? */
+#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 0
+
+/** Does the chip have native single step support? */
+#define CHIP_HAS_SINGLE_STEP() 0
+
+#ifndef __OPEN_SOURCE__ /* features only relevant to hypervisor-level code */
+
+/** How many entries are present in the instruction TLB? */
+#define CHIP_ITLB_ENTRIES() 16
+
+/** How many entries are present in the data TLB? */
+#define CHIP_DTLB_ENTRIES() 16
+
+/** How many MAF entries does the XAUI shim have? */
+#define CHIP_XAUI_MAF_ENTRIES() 32
+
+/** Does the memory shim have a source-id table? */
+#define CHIP_HAS_MSHIM_SRCID_TABLE() 0
+
+/** Does the L1 instruction cache clear on reset? */
+#define CHIP_HAS_L1I_CLEAR_ON_RESET() 1
+
+/** Does the chip come out of reset with valid coordinates on all tiles?
+ * Note that if defined, this also implies that the upper left is 1,1.
+ */
+#define CHIP_HAS_VALID_TILE_COORD_RESET() 1
+
+/** Does the chip have unified packet formats? */
+#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 1
+
+/** Does the chip support write reordering? */
+#define CHIP_HAS_WRITE_REORDERING() 1
+
+/** Does the chip support Y-X routing as well as X-Y? */
+#define CHIP_HAS_Y_X_ROUTING() 1
+
+/** Is INTCTRL_3 managed with the correct MPL? */
+#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 1
+
+/** Is it possible to configure the chip to be big-endian? */
+#define CHIP_HAS_BIG_ENDIAN_CONFIG() 1
+
+/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */
+#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 1
+
+/** Is the DIAG_TRACE_WAY SPR supported? */
+#define CHIP_HAS_DIAG_TRACE_WAY() 1
+
+/** Is the MEM_STRIPE_CONFIG SPR supported? */
+#define CHIP_HAS_MEM_STRIPE_CONFIG() 1
+
+/** Are the TLB_PERF SPRs supported? */
+#define CHIP_HAS_TLB_PERF() 1
+
+/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */
+#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 1
+
+/** Does the chip support rev1 DMA packets? */
+#define CHIP_HAS_REV1_DMA_PACKETS() 1
+
+#endif /* !__OPEN_SOURCE__ */
+#endif /* __ARCH_CHIP_H__ */
diff --git a/arch/tile/include/arch/interrupts.h b/arch/tile/include/arch/interrupts.h
new file mode 100644
index 000000000000..20f8f07d2de9
--- /dev/null
+++ b/arch/tile/include/arch/interrupts.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifdef __tilegx__
+#include <arch/interrupts_64.h>
+#else
+#include <arch/interrupts_32.h>
+#endif
diff --git a/arch/tile/include/arch/interrupts_32.h b/arch/tile/include/arch/interrupts_32.h
new file mode 100644
index 000000000000..feffada705f0
--- /dev/null
+++ b/arch/tile/include/arch/interrupts_32.h
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __ARCH_INTERRUPTS_H__
+#define __ARCH_INTERRUPTS_H__
+
+/** Mask for an interrupt. */
+#ifdef __ASSEMBLER__
+/* Note: must handle breaking interrupts into high and low words manually. */
+#define INT_MASK(intno) (1 << (intno))
+#else
+#define INT_MASK(intno) (1ULL << (intno))
+#endif
+
+
+/** Where a given interrupt executes */
+#define INTERRUPT_VECTOR(i, pl) (0xFC000000 + ((pl) << 24) + ((i) << 8))
+
+/** Where to store a vector for a given interrupt. */
+#define USER_INTERRUPT_VECTOR(i) INTERRUPT_VECTOR(i, 0)
+
+/** The base address of user-level interrupts. */
+#define USER_INTERRUPT_VECTOR_BASE INTERRUPT_VECTOR(0, 0)
+
+
+/** Additional synthetic interrupt. */
+#define INT_BREAKPOINT (63)
+
+#define INT_ITLB_MISS 0
+#define INT_MEM_ERROR 1
+#define INT_ILL 2
+#define INT_GPV 3
+#define INT_SN_ACCESS 4
+#define INT_IDN_ACCESS 5
+#define INT_UDN_ACCESS 6
+#define INT_IDN_REFILL 7
+#define INT_UDN_REFILL 8
+#define INT_IDN_COMPLETE 9
+#define INT_UDN_COMPLETE 10
+#define INT_SWINT_3 11
+#define INT_SWINT_2 12
+#define INT_SWINT_1 13
+#define INT_SWINT_0 14
+#define INT_UNALIGN_DATA 15
+#define INT_DTLB_MISS 16
+#define INT_DTLB_ACCESS 17
+#define INT_DMATLB_MISS 18
+#define INT_DMATLB_ACCESS 19
+#define INT_SNITLB_MISS 20
+#define INT_SN_NOTIFY 21
+#define INT_SN_FIREWALL 22
+#define INT_IDN_FIREWALL 23
+#define INT_UDN_FIREWALL 24
+#define INT_TILE_TIMER 25
+#define INT_IDN_TIMER 26
+#define INT_UDN_TIMER 27
+#define INT_DMA_NOTIFY 28
+#define INT_IDN_CA 29
+#define INT_UDN_CA 30
+#define INT_IDN_AVAIL 31
+#define INT_UDN_AVAIL 32
+#define INT_PERF_COUNT 33
+#define INT_INTCTRL_3 34
+#define INT_INTCTRL_2 35
+#define INT_INTCTRL_1 36
+#define INT_INTCTRL_0 37
+#define INT_BOOT_ACCESS 38
+#define INT_WORLD_ACCESS 39
+#define INT_I_ASID 40
+#define INT_D_ASID 41
+#define INT_DMA_ASID 42
+#define INT_SNI_ASID 43
+#define INT_DMA_CPL 44
+#define INT_SN_CPL 45
+#define INT_DOUBLE_FAULT 46
+#define INT_SN_STATIC_ACCESS 47
+#define INT_AUX_PERF_COUNT 48
+
+#define NUM_INTERRUPTS 49
+
+#define QUEUED_INTERRUPTS ( \
+ INT_MASK(INT_MEM_ERROR) | \
+ INT_MASK(INT_DMATLB_MISS) | \
+ INT_MASK(INT_DMATLB_ACCESS) | \
+ INT_MASK(INT_SNITLB_MISS) | \
+ INT_MASK(INT_SN_NOTIFY) | \
+ INT_MASK(INT_SN_FIREWALL) | \
+ INT_MASK(INT_IDN_FIREWALL) | \
+ INT_MASK(INT_UDN_FIREWALL) | \
+ INT_MASK(INT_TILE_TIMER) | \
+ INT_MASK(INT_IDN_TIMER) | \
+ INT_MASK(INT_UDN_TIMER) | \
+ INT_MASK(INT_DMA_NOTIFY) | \
+ INT_MASK(INT_IDN_CA) | \
+ INT_MASK(INT_UDN_CA) | \
+ INT_MASK(INT_IDN_AVAIL) | \
+ INT_MASK(INT_UDN_AVAIL) | \
+ INT_MASK(INT_PERF_COUNT) | \
+ INT_MASK(INT_INTCTRL_3) | \
+ INT_MASK(INT_INTCTRL_2) | \
+ INT_MASK(INT_INTCTRL_1) | \
+ INT_MASK(INT_INTCTRL_0) | \
+ INT_MASK(INT_BOOT_ACCESS) | \
+ INT_MASK(INT_WORLD_ACCESS) | \
+ INT_MASK(INT_I_ASID) | \
+ INT_MASK(INT_D_ASID) | \
+ INT_MASK(INT_DMA_ASID) | \
+ INT_MASK(INT_SNI_ASID) | \
+ INT_MASK(INT_DMA_CPL) | \
+ INT_MASK(INT_SN_CPL) | \
+ INT_MASK(INT_DOUBLE_FAULT) | \
+ INT_MASK(INT_AUX_PERF_COUNT) | \
+ 0)
+#define NONQUEUED_INTERRUPTS ( \
+ INT_MASK(INT_ITLB_MISS) | \
+ INT_MASK(INT_ILL) | \
+ INT_MASK(INT_GPV) | \
+ INT_MASK(INT_SN_ACCESS) | \
+ INT_MASK(INT_IDN_ACCESS) | \
+ INT_MASK(INT_UDN_ACCESS) | \
+ INT_MASK(INT_IDN_REFILL) | \
+ INT_MASK(INT_UDN_REFILL) | \
+ INT_MASK(INT_IDN_COMPLETE) | \
+ INT_MASK(INT_UDN_COMPLETE) | \
+ INT_MASK(INT_SWINT_3) | \
+ INT_MASK(INT_SWINT_2) | \
+ INT_MASK(INT_SWINT_1) | \
+ INT_MASK(INT_SWINT_0) | \
+ INT_MASK(INT_UNALIGN_DATA) | \
+ INT_MASK(INT_DTLB_MISS) | \
+ INT_MASK(INT_DTLB_ACCESS) | \
+ INT_MASK(INT_SN_STATIC_ACCESS) | \
+ 0)
+#define CRITICAL_MASKED_INTERRUPTS ( \
+ INT_MASK(INT_MEM_ERROR) | \
+ INT_MASK(INT_DMATLB_MISS) | \
+ INT_MASK(INT_DMATLB_ACCESS) | \
+ INT_MASK(INT_SNITLB_MISS) | \
+ INT_MASK(INT_SN_NOTIFY) | \
+ INT_MASK(INT_SN_FIREWALL) | \
+ INT_MASK(INT_IDN_FIREWALL) | \
+ INT_MASK(INT_UDN_FIREWALL) | \
+ INT_MASK(INT_TILE_TIMER) | \
+ INT_MASK(INT_IDN_TIMER) | \
+ INT_MASK(INT_UDN_TIMER) | \
+ INT_MASK(INT_DMA_NOTIFY) | \
+ INT_MASK(INT_IDN_CA) | \
+ INT_MASK(INT_UDN_CA) | \
+ INT_MASK(INT_IDN_AVAIL) | \
+ INT_MASK(INT_UDN_AVAIL) | \
+ INT_MASK(INT_PERF_COUNT) | \
+ INT_MASK(INT_INTCTRL_3) | \
+ INT_MASK(INT_INTCTRL_2) | \
+ INT_MASK(INT_INTCTRL_1) | \
+ INT_MASK(INT_INTCTRL_0) | \
+ INT_MASK(INT_AUX_PERF_COUNT) | \
+ 0)
+#define CRITICAL_UNMASKED_INTERRUPTS ( \
+ INT_MASK(INT_ITLB_MISS) | \
+ INT_MASK(INT_ILL) | \
+ INT_MASK(INT_GPV) | \
+ INT_MASK(INT_SN_ACCESS) | \
+ INT_MASK(INT_IDN_ACCESS) | \
+ INT_MASK(INT_UDN_ACCESS) | \
+ INT_MASK(INT_IDN_REFILL) | \
+ INT_MASK(INT_UDN_REFILL) | \
+ INT_MASK(INT_IDN_COMPLETE) | \
+ INT_MASK(INT_UDN_COMPLETE) | \
+ INT_MASK(INT_SWINT_3) | \
+ INT_MASK(INT_SWINT_2) | \
+ INT_MASK(INT_SWINT_1) | \
+ INT_MASK(INT_SWINT_0) | \
+ INT_MASK(INT_UNALIGN_DATA) | \
+ INT_MASK(INT_DTLB_MISS) | \
+ INT_MASK(INT_DTLB_ACCESS) | \
+ INT_MASK(INT_BOOT_ACCESS) | \
+ INT_MASK(INT_WORLD_ACCESS) | \
+ INT_MASK(INT_I_ASID) | \
+ INT_MASK(INT_D_ASID) | \
+ INT_MASK(INT_DMA_ASID) | \
+ INT_MASK(INT_SNI_ASID) | \
+ INT_MASK(INT_DMA_CPL) | \
+ INT_MASK(INT_SN_CPL) | \
+ INT_MASK(INT_DOUBLE_FAULT) | \
+ INT_MASK(INT_SN_STATIC_ACCESS) | \
+ 0)
+#define MASKABLE_INTERRUPTS ( \
+ INT_MASK(INT_MEM_ERROR) | \
+ INT_MASK(INT_IDN_REFILL) | \
+ INT_MASK(INT_UDN_REFILL) | \
+ INT_MASK(INT_IDN_COMPLETE) | \
+ INT_MASK(INT_UDN_COMPLETE) | \
+ INT_MASK(INT_DMATLB_MISS) | \
+ INT_MASK(INT_DMATLB_ACCESS) | \
+ INT_MASK(INT_SNITLB_MISS) | \
+ INT_MASK(INT_SN_NOTIFY) | \
+ INT_MASK(INT_SN_FIREWALL) | \
+ INT_MASK(INT_IDN_FIREWALL) | \
+ INT_MASK(INT_UDN_FIREWALL) | \
+ INT_MASK(INT_TILE_TIMER) | \
+ INT_MASK(INT_IDN_TIMER) | \
+ INT_MASK(INT_UDN_TIMER) | \
+ INT_MASK(INT_DMA_NOTIFY) | \
+ INT_MASK(INT_IDN_CA) | \
+ INT_MASK(INT_UDN_CA) | \
+ INT_MASK(INT_IDN_AVAIL) | \
+ INT_MASK(INT_UDN_AVAIL) | \
+ INT_MASK(INT_PERF_COUNT) | \
+ INT_MASK(INT_INTCTRL_3) | \
+ INT_MASK(INT_INTCTRL_2) | \
+ INT_MASK(INT_INTCTRL_1) | \
+ INT_MASK(INT_INTCTRL_0) | \
+ INT_MASK(INT_AUX_PERF_COUNT) | \
+ 0)
+#define UNMASKABLE_INTERRUPTS ( \
+ INT_MASK(INT_ITLB_MISS) | \
+ INT_MASK(INT_ILL) | \
+ INT_MASK(INT_GPV) | \
+ INT_MASK(INT_SN_ACCESS) | \
+ INT_MASK(INT_IDN_ACCESS) | \
+ INT_MASK(INT_UDN_ACCESS) | \
+ INT_MASK(INT_SWINT_3) | \
+ INT_MASK(INT_SWINT_2) | \
+ INT_MASK(INT_SWINT_1) | \
+ INT_MASK(INT_SWINT_0) | \
+ INT_MASK(INT_UNALIGN_DATA) | \
+ INT_MASK(INT_DTLB_MISS) | \
+ INT_MASK(INT_DTLB_ACCESS) | \
+ INT_MASK(INT_BOOT_ACCESS) | \
+ INT_MASK(INT_WORLD_ACCESS) | \
+ INT_MASK(INT_I_ASID) | \
+ INT_MASK(INT_D_ASID) | \
+ INT_MASK(INT_DMA_ASID) | \
+ INT_MASK(INT_SNI_ASID) | \
+ INT_MASK(INT_DMA_CPL) | \
+ INT_MASK(INT_SN_CPL) | \
+ INT_MASK(INT_DOUBLE_FAULT) | \
+ INT_MASK(INT_SN_STATIC_ACCESS) | \
+ 0)
+#define SYNC_INTERRUPTS ( \
+ INT_MASK(INT_ITLB_MISS) | \
+ INT_MASK(INT_ILL) | \
+ INT_MASK(INT_GPV) | \
+ INT_MASK(INT_SN_ACCESS) | \
+ INT_MASK(INT_IDN_ACCESS) | \
+ INT_MASK(INT_UDN_ACCESS) | \
+ INT_MASK(INT_IDN_REFILL) | \
+ INT_MASK(INT_UDN_REFILL) | \
+ INT_MASK(INT_IDN_COMPLETE) | \
+ INT_MASK(INT_UDN_COMPLETE) | \
+ INT_MASK(INT_SWINT_3) | \
+ INT_MASK(INT_SWINT_2) | \
+ INT_MASK(INT_SWINT_1) | \
+ INT_MASK(INT_SWINT_0) | \
+ INT_MASK(INT_UNALIGN_DATA) | \
+ INT_MASK(INT_DTLB_MISS) | \
+ INT_MASK(INT_DTLB_ACCESS) | \
+ INT_MASK(INT_SN_STATIC_ACCESS) | \
+ 0)
+#define NON_SYNC_INTERRUPTS ( \
+ INT_MASK(INT_MEM_ERROR) | \
+ INT_MASK(INT_DMATLB_MISS) | \
+ INT_MASK(INT_DMATLB_ACCESS) | \
+ INT_MASK(INT_SNITLB_MISS) | \
+ INT_MASK(INT_SN_NOTIFY) | \
+ INT_MASK(INT_SN_FIREWALL) | \
+ INT_MASK(INT_IDN_FIREWALL) | \
+ INT_MASK(INT_UDN_FIREWALL) | \
+ INT_MASK(INT_TILE_TIMER) | \
+ INT_MASK(INT_IDN_TIMER) | \
+ INT_MASK(INT_UDN_TIMER) | \
+ INT_MASK(INT_DMA_NOTIFY) | \
+ INT_MASK(INT_IDN_CA) | \
+ INT_MASK(INT_UDN_CA) | \
+ INT_MASK(INT_IDN_AVAIL) | \
+ INT_MASK(INT_UDN_AVAIL) | \
+ INT_MASK(INT_PERF_COUNT) | \
+ INT_MASK(INT_INTCTRL_3) | \
+ INT_MASK(INT_INTCTRL_2) | \
+ INT_MASK(INT_INTCTRL_1) | \
+ INT_MASK(INT_INTCTRL_0) | \
+ INT_MASK(INT_BOOT_ACCESS) | \
+ INT_MASK(INT_WORLD_ACCESS) | \
+ INT_MASK(INT_I_ASID) | \
+ INT_MASK(INT_D_ASID) | \
+ INT_MASK(INT_DMA_ASID) | \
+ INT_MASK(INT_SNI_ASID) | \
+ INT_MASK(INT_DMA_CPL) | \
+ INT_MASK(INT_SN_CPL) | \
+ INT_MASK(INT_DOUBLE_FAULT) | \
+ INT_MASK(INT_AUX_PERF_COUNT) | \
+ 0)
+#endif // !__ARCH_INTERRUPTS_H__
diff --git a/arch/tile/include/arch/sim_def.h b/arch/tile/include/arch/sim_def.h
new file mode 100644
index 000000000000..6418fbde063e
--- /dev/null
+++ b/arch/tile/include/arch/sim_def.h
@@ -0,0 +1,512 @@
+// Copyright 2010 Tilera Corporation. All Rights Reserved.
+//
+// This program is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License
+// as published by the Free Software Foundation, version 2.
+//
+// This program is distributed in the hope that it will be useful, but
+// WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+// NON INFRINGEMENT. See the GNU General Public License for
+// more details.
+
+//! @file
+//!
+//! Some low-level simulator definitions.
+//!
+
+#ifndef __ARCH_SIM_DEF_H__
+#define __ARCH_SIM_DEF_H__
+
+
+//! Internal: the low bits of the SIM_CONTROL_* SPR values specify
+//! the operation to perform, and the remaining bits are
+//! an operation-specific parameter (often unused).
+//!
+#define _SIM_CONTROL_OPERATOR_BITS 8
+
+
+//== Values which can be written to SPR_SIM_CONTROL.
+
+//! If written to SPR_SIM_CONTROL, stops profiling.
+//!
+#define SIM_CONTROL_PROFILER_DISABLE 0
+
+//! If written to SPR_SIM_CONTROL, starts profiling.
+//!
+#define SIM_CONTROL_PROFILER_ENABLE 1
+
+//! If written to SPR_SIM_CONTROL, clears profiling counters.
+//!
+#define SIM_CONTROL_PROFILER_CLEAR 2
+
+//! If written to SPR_SIM_CONTROL, checkpoints the simulator.
+//!
+#define SIM_CONTROL_CHECKPOINT 3
+
+//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+//! sets the tracing mask to the given mask. See "sim_set_tracing()".
+//!
+#define SIM_CONTROL_SET_TRACING 4
+
+//! If written to SPR_SIM_CONTROL, combined with a mask (shifted by 8),
+//! dumps the requested items of machine state to the log.
+//!
+#define SIM_CONTROL_DUMP 5
+
+//! If written to SPR_SIM_CONTROL, clears chip-level profiling counters.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_CLEAR 6
+
+//! If written to SPR_SIM_CONTROL, disables chip-level profiling.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_DISABLE 7
+
+//! If written to SPR_SIM_CONTROL, enables chip-level profiling.
+//!
+#define SIM_CONTROL_PROFILER_CHIP_ENABLE 8
+
+//! If written to SPR_SIM_CONTROL, enables chip-level functional mode
+//!
+#define SIM_CONTROL_ENABLE_FUNCTIONAL 9
+
+//! If written to SPR_SIM_CONTROL, disables chip-level functional mode.
+//!
+#define SIM_CONTROL_DISABLE_FUNCTIONAL 10
+
+//! If written to SPR_SIM_CONTROL, enables chip-level functional mode.
+//! All tiles must perform this write for functional mode to be enabled.
+//! Ignored in naked boot mode unless --functional is specified.
+//! WARNING: Only the hypervisor startup code should use this!
+//!
+#define SIM_CONTROL_ENABLE_FUNCTIONAL_BARRIER 11
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! writes a string directly to the simulator output. Written to once for
+//! each character in the string, plus a final NUL. Instead of NUL,
+//! you can also use "SIM_PUTC_FLUSH_STRING" or "SIM_PUTC_FLUSH_BINARY".
+//!
+// ISSUE: Document the meaning of "newline", and the handling of NUL.
+//
+#define SIM_CONTROL_PUTC 12
+
+//! If written to SPR_SIM_CONTROL, clears the --grind-coherence state for
+//! this core. This is intended to be used before a loop that will
+//! invalidate the cache by loading new data and evicting all current data.
+//! Generally speaking, this API should only be used by system code.
+//!
+#define SIM_CONTROL_GRINDER_CLEAR 13
+
+//! If written to SPR_SIM_CONTROL, shuts down the simulator.
+//!
+#define SIM_CONTROL_SHUTDOWN 14
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that a fork syscall just created the given process.
+//!
+#define SIM_CONTROL_OS_FORK 15
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that an exit syscall was just executed by the given process.
+//!
+#define SIM_CONTROL_OS_EXIT 16
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! indicates that the OS just switched to the given process.
+//!
+#define SIM_CONTROL_OS_SWITCH 17
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that an exec syscall was just executed. Written to once for
+//! each character in the executable name, plus a final NUL.
+//!
+#define SIM_CONTROL_OS_EXEC 18
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that an interpreter (PT_INTERP) was loaded. Written to once
+//! for each character in "ADDR:PATH", plus a final NUL, where "ADDR" is a
+//! hex load address starting with "0x", and "PATH" is the executable name.
+//!
+#define SIM_CONTROL_OS_INTERP 19
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that a dll was loaded. Written to once for each character
+//! in "ADDR:PATH", plus a final NUL, where "ADDR" is a hexadecimal load
+//! address starting with "0x", and "PATH" is the executable name.
+//!
+#define SIM_CONTROL_DLOPEN 20
+
+//! If written to SPR_SIM_CONTROL, combined with a character (shifted by 8),
+//! indicates that a dll was unloaded. Written to once for each character
+//! in "ADDR", plus a final NUL, where "ADDR" is a hexadecimal load
+//! address starting with "0x".
+//!
+#define SIM_CONTROL_DLCLOSE 21
+
+//! If written to SPR_SIM_CONTROL, combined with a flag (shifted by 8),
+//! indicates whether to allow data reads to remotely-cached
+//! dirty cache lines to be cached locally without grinder warnings or
+//! assertions (used by Linux kernel fast memcpy).
+//!
+#define SIM_CONTROL_ALLOW_MULTIPLE_CACHING 22
+
+//! If written to SPR_SIM_CONTROL, enables memory tracing.
+//!
+#define SIM_CONTROL_ENABLE_MEM_LOGGING 23
+
+//! If written to SPR_SIM_CONTROL, disables memory tracing.
+//!
+#define SIM_CONTROL_DISABLE_MEM_LOGGING 24
+
+//! If written to SPR_SIM_CONTROL, changes the shaping parameters of one of
+//! the gbe or xgbe shims. Must specify the shim id, the type, the units, and
+//! the rate, as defined in SIM_SHAPING_SPR_ARG.
+//!
+#define SIM_CONTROL_SHAPING 25
+
+//! If written to SPR_SIM_CONTROL, combined with character (shifted by 8),
+//! requests that a simulator command be executed. Written to once for each
+//! character in the command, plus a final NUL.
+//!
+#define SIM_CONTROL_COMMAND 26
+
+//! If written to SPR_SIM_CONTROL, indicates that the simulated system
+//! is panicking, to allow debugging via --debug-on-panic.
+//!
+#define SIM_CONTROL_PANIC 27
+
+//! If written to SPR_SIM_CONTROL, triggers a simulator syscall.
+//! See "sim_syscall()" for more info.
+//!
+#define SIM_CONTROL_SYSCALL 32
+
+//! If written to SPR_SIM_CONTROL, combined with a pid (shifted by 8),
+//! provides the pid that subsequent SIM_CONTROL_OS_FORK writes should
+//! use as the pid, rather than the default previous SIM_CONTROL_OS_SWITCH.
+//!
+#define SIM_CONTROL_OS_FORK_PARENT 33
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8), clears the pending magic data section. The cleared
+//! pending magic data section and any subsequently appended magic bytes
+//! will only take effect when the classifier blast programmer is run.
+#define SIM_CONTROL_CLEAR_MPIPE_MAGIC_BYTES 34
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8) and a byte of data (shifted by 16), appends that byte
+//! to the shim's pending magic data section. The pending magic data
+//! section takes effect when the classifier blast programmer is run.
+#define SIM_CONTROL_APPEND_MPIPE_MAGIC_BYTE 35
+
+//! If written to SPR_SIM_CONTROL, combined with a mPIPE shim number
+//! (shifted by 8), an enable=1/disable=0 bit (shifted by 16), and a
+//! mask of links (shifted by 32), enable or disable the corresponding
+//! mPIPE links.
+#define SIM_CONTROL_ENABLE_MPIPE_LINK_MAGIC_BYTE 36
+
+//== Syscall numbers for use with "sim_syscall()".
+
+//! Syscall number for sim_add_watchpoint().
+//!
+#define SIM_SYSCALL_ADD_WATCHPOINT 2
+
+//! Syscall number for sim_remove_watchpoint().
+//!
+#define SIM_SYSCALL_REMOVE_WATCHPOINT 3
+
+//! Syscall number for sim_query_watchpoint().
+//!
+#define SIM_SYSCALL_QUERY_WATCHPOINT 4
+
+//! Syscall number that asserts that the cache lines whose 64-bit PA
+//! is passed as the second argument to sim_syscall(), and over a
+//! range passed as the third argument, are no longer in cache.
+//! The simulator raises an error if this is not the case.
+//!
+#define SIM_SYSCALL_VALIDATE_LINES_EVICTED 5
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_SET_TRACING, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Enable --trace-cycle when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_CYCLES 0x01
+
+//! Enable --trace-router when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_ROUTER 0x02
+
+//! Enable --trace-register-writes when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_REGISTER_WRITES 0x04
+
+//! Enable --trace-disasm when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_DISASM 0x08
+
+//! Enable --trace-stall-info when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_STALL_INFO 0x10
+
+//! Enable --trace-memory-controller when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_MEMORY_CONTROLLER 0x20
+
+//! Enable --trace-l2 when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_L2_CACHE 0x40
+
+//! Enable --trace-lines when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_LINES 0x80
+
+//! Turn off all tracing when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_NONE 0
+
+//! Turn on all tracing when passed to simulator_set_tracing().
+//!
+#define SIM_TRACE_ALL (-1)
+
+//! @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to set tracing flags.
+//!
+#define SIM_TRACE_SPR_ARG(mask) \
+ (SIM_CONTROL_SET_TRACING | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_DUMP, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Dump the general-purpose registers.
+//!
+#define SIM_DUMP_REGS 0x001
+
+//! Dump the SPRs.
+//!
+#define SIM_DUMP_SPRS 0x002
+
+//! Dump the ITLB.
+//!
+#define SIM_DUMP_ITLB 0x004
+
+//! Dump the DTLB.
+//!
+#define SIM_DUMP_DTLB 0x008
+
+//! Dump the L1 I-cache.
+//!
+#define SIM_DUMP_L1I 0x010
+
+//! Dump the L1 D-cache.
+//!
+#define SIM_DUMP_L1D 0x020
+
+//! Dump the L2 cache.
+//!
+#define SIM_DUMP_L2 0x040
+
+//! Dump the switch registers.
+//!
+#define SIM_DUMP_SNREGS 0x080
+
+//! Dump the switch ITLB.
+//!
+#define SIM_DUMP_SNITLB 0x100
+
+//! Dump the switch L1 I-cache.
+//!
+#define SIM_DUMP_SNL1I 0x200
+
+//! Dump the current backtrace.
+//!
+#define SIM_DUMP_BACKTRACE 0x400
+
+//! Only dump valid lines in caches.
+//!
+#define SIM_DUMP_VALID_LINES 0x800
+
+//! Dump everything that is dumpable.
+//!
+#define SIM_DUMP_ALL (-1 & ~SIM_DUMP_VALID_LINES)
+
+// @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to dump machine state.
+//!
+#define SIM_DUMP_SPR_ARG(mask) \
+ (SIM_CONTROL_DUMP | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+//== Bit masks which can be shifted by 8, combined with
+//== SIM_CONTROL_PROFILER_CHIP_xxx, and written to SPR_SIM_CONTROL.
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the memory controllers.
+//!
+#define SIM_CHIP_MEMCTL 0x001
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the XAUI interface.
+//!
+#define SIM_CHIP_XAUI 0x002
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the PCIe interface.
+//!
+#define SIM_CHIP_PCIE 0x004
+
+//! Use with with SIM_PROFILER_CHIP_xxx to control the MPIPE interface.
+//!
+#define SIM_CHIP_MPIPE 0x008
+
+//! Reference all chip devices.
+//!
+#define SIM_CHIP_ALL (-1)
+
+//! @}
+
+//! Computes the value to write to SPR_SIM_CONTROL to clear chip statistics.
+//!
+#define SIM_PROFILER_CHIP_CLEAR_SPR_ARG(mask) \
+ (SIM_CONTROL_PROFILER_CHIP_CLEAR | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to disable chip statistics.
+//!
+#define SIM_PROFILER_CHIP_DISABLE_SPR_ARG(mask) \
+ (SIM_CONTROL_PROFILER_CHIP_DISABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to enable chip statistics.
+//!
+#define SIM_PROFILER_CHIP_ENABLE_SPR_ARG(mask) \
+ (SIM_CONTROL_PROFILER_CHIP_ENABLE | ((mask) << _SIM_CONTROL_OPERATOR_BITS))
+
+
+
+// Shim bitrate controls.
+
+//! The number of bits used to store the shim id.
+//!
+#define SIM_CONTROL_SHAPING_SHIM_ID_BITS 3
+
+//! @addtogroup arch_sim
+//! @{
+
+//! Change the gbe 0 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_0 0x0
+
+//! Change the gbe 1 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_1 0x1
+
+//! Change the gbe 2 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_2 0x2
+
+//! Change the gbe 3 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_GBE_3 0x3
+
+//! Change the xgbe 0 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_XGBE_0 0x4
+
+//! Change the xgbe 1 bitrate.
+//!
+#define SIM_CONTROL_SHAPING_XGBE_1 0x5
+
+//! The type of shaping to do.
+//!
+#define SIM_CONTROL_SHAPING_TYPE_BITS 2
+
+//! Control the multiplier.
+//!
+#define SIM_CONTROL_SHAPING_MULTIPLIER 0
+
+//! Control the PPS.
+//!
+#define SIM_CONTROL_SHAPING_PPS 1
+
+//! Control the BPS.
+//!
+#define SIM_CONTROL_SHAPING_BPS 2
+
+//! The number of bits for the units for the shaping parameter.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_BITS 2
+
+//! Provide a number in single units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_SINGLE 0
+
+//! Provide a number in kilo units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_KILO 1
+
+//! Provide a number in mega units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_MEGA 2
+
+//! Provide a number in giga units.
+//!
+#define SIM_CONTROL_SHAPING_UNITS_GIGA 3
+
+// @}
+
+//! How many bits are available for the rate.
+//!
+#define SIM_CONTROL_SHAPING_RATE_BITS \
+ (32 - (_SIM_CONTROL_OPERATOR_BITS + \
+ SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+ SIM_CONTROL_SHAPING_TYPE_BITS + \
+ SIM_CONTROL_SHAPING_UNITS_BITS))
+
+//! Computes the value to write to SPR_SIM_CONTROL to change a bitrate.
+//!
+#define SIM_SHAPING_SPR_ARG(shim, type, units, rate) \
+ (SIM_CONTROL_SHAPING | \
+ ((shim) | \
+ ((type) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS)) | \
+ ((units) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+ SIM_CONTROL_SHAPING_TYPE_BITS)) | \
+ ((rate) << (SIM_CONTROL_SHAPING_SHIM_ID_BITS + \
+ SIM_CONTROL_SHAPING_TYPE_BITS + \
+ SIM_CONTROL_SHAPING_UNITS_BITS))) << _SIM_CONTROL_OPERATOR_BITS)
+
+
+//== Values returned when reading SPR_SIM_CONTROL.
+// ISSUE: These names should share a longer common prefix.
+
+//! When reading SPR_SIM_CONTROL, the mask of simulator tracing bits
+//! (SIM_TRACE_xxx values).
+//!
+#define SIM_TRACE_FLAG_MASK 0xFFFF
+
+//! When reading SPR_SIM_CONTROL, the mask for whether profiling is enabled.
+//!
+#define SIM_PROFILER_ENABLED_MASK 0x10000
+
+
+//== Special arguments for "SIM_CONTROL_PUTC".
+
+//! Flag value for forcing a PUTC string-flush, including
+//! coordinate/cycle prefix and newline.
+//!
+#define SIM_PUTC_FLUSH_STRING 0x100
+
+//! Flag value for forcing a PUTC binary-data-flush, which skips the
+//! prefix and does not append a newline.
+//!
+#define SIM_PUTC_FLUSH_BINARY 0x101
+
+
+#endif //__ARCH_SIM_DEF_H__
diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h
new file mode 100644
index 000000000000..c8fdbd9a45e6
--- /dev/null
+++ b/arch/tile/include/arch/spr_def.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifdef __tilegx__
+#include <arch/spr_def_64.h>
+#else
+#include <arch/spr_def_32.h>
+#endif
diff --git a/arch/tile/include/arch/spr_def_32.h b/arch/tile/include/arch/spr_def_32.h
new file mode 100644
index 000000000000..b4fc06864df6
--- /dev/null
+++ b/arch/tile/include/arch/spr_def_32.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef __DOXYGEN__
+
+#ifndef __ARCH_SPR_DEF_H__
+#define __ARCH_SPR_DEF_H__
+
+#define SPR_AUX_PERF_COUNT_0 0x6005
+#define SPR_AUX_PERF_COUNT_1 0x6006
+#define SPR_AUX_PERF_COUNT_CTL 0x6007
+#define SPR_AUX_PERF_COUNT_STS 0x6008
+#define SPR_CYCLE_HIGH 0x4e06
+#define SPR_CYCLE_LOW 0x4e07
+#define SPR_DMA_BYTE 0x3900
+#define SPR_DMA_CHUNK_SIZE 0x3901
+#define SPR_DMA_CTR 0x3902
+#define SPR_DMA_CTR__REQUEST_MASK 0x1
+#define SPR_DMA_CTR__SUSPEND_MASK 0x2
+#define SPR_DMA_DST_ADDR 0x3903
+#define SPR_DMA_DST_CHUNK_ADDR 0x3904
+#define SPR_DMA_SRC_ADDR 0x3905
+#define SPR_DMA_SRC_CHUNK_ADDR 0x3906
+#define SPR_DMA_STATUS__DONE_MASK 0x1
+#define SPR_DMA_STATUS__BUSY_MASK 0x2
+#define SPR_DMA_STATUS__RUNNING_MASK 0x10
+#define SPR_DMA_STRIDE 0x3907
+#define SPR_DMA_USER_STATUS 0x3908
+#define SPR_DONE 0x4e08
+#define SPR_EVENT_BEGIN 0x4e0d
+#define SPR_EVENT_END 0x4e0e
+#define SPR_EX_CONTEXT_0_0 0x4a05
+#define SPR_EX_CONTEXT_0_1 0x4a06
+#define SPR_EX_CONTEXT_0_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_0_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_0_1__PL_MASK 0x3
+#define SPR_EX_CONTEXT_0_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_0_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_0_1__ICS_MASK 0x4
+#define SPR_EX_CONTEXT_1_0 0x4805
+#define SPR_EX_CONTEXT_1_1 0x4806
+#define SPR_EX_CONTEXT_1_1__PL_SHIFT 0
+#define SPR_EX_CONTEXT_1_1__PL_RMASK 0x3
+#define SPR_EX_CONTEXT_1_1__PL_MASK 0x3
+#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2
+#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1
+#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4
+#define SPR_FAIL 0x4e09
+#define SPR_INTCTRL_0_STATUS 0x4a07
+#define SPR_INTCTRL_1_STATUS 0x4807
+#define SPR_INTERRUPT_CRITICAL_SECTION 0x4e0a
+#define SPR_INTERRUPT_MASK_0_0 0x4a08
+#define SPR_INTERRUPT_MASK_0_1 0x4a09
+#define SPR_INTERRUPT_MASK_1_0 0x4809
+#define SPR_INTERRUPT_MASK_1_1 0x480a
+#define SPR_INTERRUPT_MASK_RESET_0_0 0x4a0a
+#define SPR_INTERRUPT_MASK_RESET_0_1 0x4a0b
+#define SPR_INTERRUPT_MASK_RESET_1_0 0x480b
+#define SPR_INTERRUPT_MASK_RESET_1_1 0x480c
+#define SPR_INTERRUPT_MASK_SET_0_0 0x4a0c
+#define SPR_INTERRUPT_MASK_SET_0_1 0x4a0d
+#define SPR_INTERRUPT_MASK_SET_1_0 0x480d
+#define SPR_INTERRUPT_MASK_SET_1_1 0x480e
+#define SPR_MPL_DMA_CPL_SET_0 0x5800
+#define SPR_MPL_DMA_CPL_SET_1 0x5801
+#define SPR_MPL_DMA_NOTIFY_SET_0 0x3800
+#define SPR_MPL_DMA_NOTIFY_SET_1 0x3801
+#define SPR_MPL_INTCTRL_0_SET_0 0x4a00
+#define SPR_MPL_INTCTRL_0_SET_1 0x4a01
+#define SPR_MPL_INTCTRL_1_SET_0 0x4800
+#define SPR_MPL_INTCTRL_1_SET_1 0x4801
+#define SPR_MPL_SN_ACCESS_SET_0 0x0800
+#define SPR_MPL_SN_ACCESS_SET_1 0x0801
+#define SPR_MPL_SN_CPL_SET_0 0x5a00
+#define SPR_MPL_SN_CPL_SET_1 0x5a01
+#define SPR_MPL_SN_FIREWALL_SET_0 0x2c00
+#define SPR_MPL_SN_FIREWALL_SET_1 0x2c01
+#define SPR_MPL_SN_NOTIFY_SET_0 0x2a00
+#define SPR_MPL_SN_NOTIFY_SET_1 0x2a01
+#define SPR_MPL_UDN_ACCESS_SET_0 0x0c00
+#define SPR_MPL_UDN_ACCESS_SET_1 0x0c01
+#define SPR_MPL_UDN_AVAIL_SET_0 0x4000
+#define SPR_MPL_UDN_AVAIL_SET_1 0x4001
+#define SPR_MPL_UDN_CA_SET_0 0x3c00
+#define SPR_MPL_UDN_CA_SET_1 0x3c01
+#define SPR_MPL_UDN_COMPLETE_SET_0 0x1400
+#define SPR_MPL_UDN_COMPLETE_SET_1 0x1401
+#define SPR_MPL_UDN_FIREWALL_SET_0 0x3000
+#define SPR_MPL_UDN_FIREWALL_SET_1 0x3001
+#define SPR_MPL_UDN_REFILL_SET_0 0x1000
+#define SPR_MPL_UDN_REFILL_SET_1 0x1001
+#define SPR_MPL_UDN_TIMER_SET_0 0x3600
+#define SPR_MPL_UDN_TIMER_SET_1 0x3601
+#define SPR_MPL_WORLD_ACCESS_SET_0 0x4e00
+#define SPR_MPL_WORLD_ACCESS_SET_1 0x4e01
+#define SPR_PASS 0x4e0b
+#define SPR_PERF_COUNT_0 0x4205
+#define SPR_PERF_COUNT_1 0x4206
+#define SPR_PERF_COUNT_CTL 0x4207
+#define SPR_PERF_COUNT_STS 0x4208
+#define SPR_PROC_STATUS 0x4f00
+#define SPR_SIM_CONTROL 0x4e0c
+#define SPR_SNCTL 0x0805
+#define SPR_SNCTL__FRZFABRIC_MASK 0x1
+#define SPR_SNCTL__FRZPROC_MASK 0x2
+#define SPR_SNPC 0x080b
+#define SPR_SNSTATIC 0x080c
+#define SPR_SYSTEM_SAVE_0_0 0x4b00
+#define SPR_SYSTEM_SAVE_0_1 0x4b01
+#define SPR_SYSTEM_SAVE_0_2 0x4b02
+#define SPR_SYSTEM_SAVE_0_3 0x4b03
+#define SPR_SYSTEM_SAVE_1_0 0x4900
+#define SPR_SYSTEM_SAVE_1_1 0x4901
+#define SPR_SYSTEM_SAVE_1_2 0x4902
+#define SPR_SYSTEM_SAVE_1_3 0x4903
+#define SPR_TILE_COORD 0x4c17
+#define SPR_TILE_RTF_HWM 0x4e10
+#define SPR_TILE_TIMER_CONTROL 0x3205
+#define SPR_TILE_WRITE_PENDING 0x4e0f
+#define SPR_UDN_AVAIL_EN 0x4005
+#define SPR_UDN_CA_DATA 0x0d00
+#define SPR_UDN_DATA_AVAIL 0x0d03
+#define SPR_UDN_DEADLOCK_TIMEOUT 0x3606
+#define SPR_UDN_DEMUX_CA_COUNT 0x0c05
+#define SPR_UDN_DEMUX_COUNT_0 0x0c06
+#define SPR_UDN_DEMUX_COUNT_1 0x0c07
+#define SPR_UDN_DEMUX_COUNT_2 0x0c08
+#define SPR_UDN_DEMUX_COUNT_3 0x0c09
+#define SPR_UDN_DEMUX_CTL 0x0c0a
+#define SPR_UDN_DEMUX_QUEUE_SEL 0x0c0c
+#define SPR_UDN_DEMUX_STATUS 0x0c0d
+#define SPR_UDN_DEMUX_WRITE_FIFO 0x0c0e
+#define SPR_UDN_DIRECTION_PROTECT 0x3005
+#define SPR_UDN_REFILL_EN 0x1005
+#define SPR_UDN_SP_FIFO_DATA 0x0c11
+#define SPR_UDN_SP_FIFO_SEL 0x0c12
+#define SPR_UDN_SP_FREEZE 0x0c13
+#define SPR_UDN_SP_FREEZE__SP_FRZ_MASK 0x1
+#define SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK 0x2
+#define SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK 0x4
+#define SPR_UDN_SP_STATE 0x0c14
+#define SPR_UDN_TAG_0 0x0c15
+#define SPR_UDN_TAG_1 0x0c16
+#define SPR_UDN_TAG_2 0x0c17
+#define SPR_UDN_TAG_3 0x0c18
+#define SPR_UDN_TAG_VALID 0x0c19
+#define SPR_UDN_TILE_COORD 0x0c1a
+
+#endif /* !defined(__ARCH_SPR_DEF_H__) */
+
+#endif /* !defined(__DOXYGEN__) */
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild
new file mode 100644
index 000000000000..3b8f55b82dee
--- /dev/null
+++ b/arch/tile/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += ucontext.h
diff --git a/arch/tile/include/asm/asm-offsets.h b/arch/tile/include/asm/asm-offsets.h
new file mode 100644
index 000000000000..d370ee36a182
--- /dev/null
+++ b/arch/tile/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h
new file mode 100644
index 000000000000..b8c49f98a44c
--- /dev/null
+++ b/arch/tile/include/asm/atomic.h
@@ -0,0 +1,159 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Atomic primitives.
+ */
+
+#ifndef _ASM_TILE_ATOMIC_H
+#define _ASM_TILE_ATOMIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i) { (i) }
+
+/**
+ * atomic_read - read atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline int atomic_read(const atomic_t *v)
+{
+ return v->counter;
+}
+
+/**
+ * atomic_sub_return - subtract integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to subtract
+ *
+ * Atomically subtracts @i from @v and returns @v - @i
+ */
+#define atomic_sub_return(i, v) atomic_add_return((int)(-(i)), (v))
+
+/**
+ * atomic_sub - subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v.
+ */
+#define atomic_sub(i, v) atomic_add((int)(-(i)), (v))
+
+/**
+ * atomic_sub_and_test - subtract value from variable and test result
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v and returns true if the result is
+ * zero, or false for all other cases.
+ */
+#define atomic_sub_and_test(i, v) (atomic_sub_return((i), (v)) == 0)
+
+/**
+ * atomic_inc_return - increment memory and return
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns the new value.
+ */
+#define atomic_inc_return(v) atomic_add_return(1, (v))
+
+/**
+ * atomic_dec_return - decrement memory and return
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns the new value.
+ */
+#define atomic_dec_return(v) atomic_sub_return(1, (v))
+
+/**
+ * atomic_inc - increment atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1.
+ */
+#define atomic_inc(v) atomic_add(1, (v))
+
+/**
+ * atomic_dec - decrement atomic variable
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1.
+ */
+#define atomic_dec(v) atomic_sub(1, (v))
+
+/**
+ * atomic_dec_and_test - decrement and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically decrements @v by 1 and returns true if the result is 0.
+ */
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+
+/**
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1 and returns true if the result is 0.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+/**
+ * atomic_add_negative - add and test if negative
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns true if the result is
+ * negative, or false when result is greater than or equal to zero.
+ */
+#define atomic_add_negative(i, v) (atomic_add_return((i), (v)) < 0)
+
+/**
+ * atomic_inc_not_zero - increment unless the number is zero
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1, so long as @v is non-zero.
+ * Returns non-zero if @v was non-zero, and zero otherwise.
+ */
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+
+/*
+ * We define xchg() and cmpxchg() in the included headers.
+ * Note that we do not define __HAVE_ARCH_CMPXCHG, since that would imply
+ * that cmpxchg() is an efficient operation, which is not particularly true.
+ */
+
+/* Nonexistent functions intended to cause link errors. */
+extern unsigned long __xchg_called_with_bad_pointer(void);
+extern unsigned long __cmpxchg_called_with_bad_pointer(void);
+
+#define tas(ptr) (xchg((ptr), 1))
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __tilegx__
+#include <asm/atomic_32.h>
+#else
+#include <asm/atomic_64.h>
+#endif
+
+/* Provide the appropriate atomic_long_t definitions. */
+#ifndef __ASSEMBLY__
+#include <asm-generic/atomic-long.h>
+#endif
+
+#endif /* _ASM_TILE_ATOMIC_H */
diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h
new file mode 100644
index 000000000000..e4f8b4f04895
--- /dev/null
+++ b/arch/tile/include/asm/atomic_32.h
@@ -0,0 +1,353 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Do not include directly; use <asm/atomic.h>.
+ */
+
+#ifndef _ASM_TILE_ATOMIC_32_H
+#define _ASM_TILE_ATOMIC_32_H
+
+#include <arch/chip.h>
+
+#ifndef __ASSEMBLY__
+
+/* Tile-specific routines to support <asm/atomic.h>. */
+int _atomic_xchg(atomic_t *v, int n);
+int _atomic_xchg_add(atomic_t *v, int i);
+int _atomic_xchg_add_unless(atomic_t *v, int a, int u);
+int _atomic_cmpxchg(atomic_t *v, int o, int n);
+
+/**
+ * atomic_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline int atomic_xchg(atomic_t *v, int n)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic_xchg(v, n);
+}
+
+/**
+ * atomic_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline int atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic_cmpxchg(v, o, n);
+}
+
+/**
+ * atomic_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+ _atomic_xchg_add(v, i);
+}
+
+/**
+ * atomic_add_return - add integer and return
+ * @v: pointer of type atomic_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic_xchg_add(v, i) + i;
+}
+
+/**
+ * atomic_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic_xchg_add_unless(v, a, u) != u;
+}
+
+/**
+ * atomic_set - set atomic variable
+ * @v: pointer of type atomic_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ *
+ * atomic_set() can't be just a raw store, since it would be lost if it
+ * fell between the load and store of one of the other atomic ops.
+ */
+static inline void atomic_set(atomic_t *v, int n)
+{
+ _atomic_xchg(v, n);
+}
+
+#define xchg(ptr, x) ((typeof(*(ptr))) \
+ ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \
+ atomic_xchg((atomic_t *)(ptr), (long)(x)) : \
+ __xchg_called_with_bad_pointer()))
+
+#define cmpxchg(ptr, o, n) ((typeof(*(ptr))) \
+ ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \
+ atomic_cmpxchg((atomic_t *)(ptr), (long)(o), (long)(n)) : \
+ __cmpxchg_called_with_bad_pointer()))
+
+/* A 64bit atomic type */
+
+typedef struct {
+ u64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(val) { (val) }
+
+u64 _atomic64_xchg(atomic64_t *v, u64 n);
+u64 _atomic64_xchg_add(atomic64_t *v, u64 i);
+u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u);
+u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n);
+
+/**
+ * atomic64_read - read atomic variable
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically reads the value of @v.
+ */
+static inline u64 atomic64_read(const atomic64_t *v)
+{
+ /*
+ * Requires an atomic op to read both 32-bit parts consistently.
+ * Casting away const is safe since the atomic support routines
+ * do not write to memory if the value has not been modified.
+ */
+ return _atomic64_xchg_add((atomic64_t *)v, 0);
+}
+
+/**
+ * atomic64_xchg - atomically exchange contents of memory with a new value
+ * @v: pointer of type atomic64_t
+ * @i: integer value to store in memory
+ *
+ * Atomically sets @v to @i and returns old @v
+ */
+static inline u64 atomic64_xchg(atomic64_t *v, u64 n)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic64_xchg(v, n);
+}
+
+/**
+ * atomic64_cmpxchg - atomically exchange contents of memory if it matches
+ * @v: pointer of type atomic64_t
+ * @o: old value that memory should have
+ * @n: new value to write to memory if it matches
+ *
+ * Atomically checks if @v holds @o and replaces it with @n if so.
+ * Returns the old value at @v.
+ */
+static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic64_cmpxchg(v, o, n);
+}
+
+/**
+ * atomic64_add - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically adds @i to @v.
+ */
+static inline void atomic64_add(u64 i, atomic64_t *v)
+{
+ _atomic64_xchg_add(v, i);
+}
+
+/**
+ * atomic64_add_return - add integer and return
+ * @v: pointer of type atomic64_t
+ * @i: integer value to add
+ *
+ * Atomically adds @i to @v and returns @i + @v
+ */
+static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic64_xchg_add(v, i) + i;
+}
+
+/**
+ * atomic64_add_unless - add unless the number is already a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as @v was not already @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+ smp_mb(); /* barrier for proper semantics */
+ return _atomic64_xchg_add_unless(v, a, u) != u;
+}
+
+/**
+ * atomic64_set - set atomic variable
+ * @v: pointer of type atomic64_t
+ * @i: required value
+ *
+ * Atomically sets the value of @v to @i.
+ *
+ * atomic64_set() can't be just a raw store, since it would be lost if it
+ * fell between the load and store of one of the other atomic ops.
+ */
+static inline void atomic64_set(atomic64_t *v, u64 n)
+{
+ _atomic64_xchg(v, n);
+}
+
+#define atomic64_add_negative(a, v) (atomic64_add_return((a), (v)) < 0)
+#define atomic64_inc(v) atomic64_add(1LL, (v))
+#define atomic64_inc_return(v) atomic64_add_return(1LL, (v))
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+#define atomic64_sub_return(i, v) atomic64_add_return(-(i), (v))
+#define atomic64_sub_and_test(a, v) (atomic64_sub_return((a), (v)) == 0)
+#define atomic64_sub(i, v) atomic64_add(-(i), (v))
+#define atomic64_dec(v) atomic64_sub(1LL, (v))
+#define atomic64_dec_return(v) atomic64_sub_return(1LL, (v))
+#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0)
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL)
+
+/*
+ * We need to barrier before modifying the word, since the _atomic_xxx()
+ * routines just tns the lock and then read/modify/write of the word.
+ * But after the word is updated, the routine issues an "mf" before returning,
+ * and since it's a function call, we don't even need a compiler barrier.
+ */
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_dec() do { } while (0)
+#define smp_mb__after_atomic_inc() do { } while (0)
+
+
+/*
+ * Support "tns" atomic integers. These are atomic integers that can
+ * hold any value but "1". They are more efficient than regular atomic
+ * operations because the "lock" (aka acquire) step is a single "tns"
+ * in the uncontended case, and the "unlock" (aka release) step is a
+ * single "store" without an mf. (However, note that on tilepro the
+ * "tns" will evict the local cache line, so it's not all upside.)
+ *
+ * Note that you can ONLY observe the value stored in the pointer
+ * using these operations; a direct read of the value may confusingly
+ * return the special value "1".
+ */
+
+int __tns_atomic_acquire(atomic_t *);
+void __tns_atomic_release(atomic_t *p, int v);
+
+static inline void tns_atomic_set(atomic_t *v, int i)
+{
+ __tns_atomic_acquire(v);
+ __tns_atomic_release(v, i);
+}
+
+static inline int tns_atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+ int ret = __tns_atomic_acquire(v);
+ __tns_atomic_release(v, (ret == o) ? n : ret);
+ return ret;
+}
+
+static inline int tns_atomic_xchg(atomic_t *v, int n)
+{
+ int ret = __tns_atomic_acquire(v);
+ __tns_atomic_release(v, n);
+ return ret;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Internal definitions only beyond this point.
+ */
+
+#define ATOMIC_LOCKS_FOUND_VIA_TABLE() \
+ (!CHIP_HAS_CBOX_HOME_MAP() && defined(CONFIG_SMP))
+
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+/* Number of entries in atomic_lock_ptr[]. */
+#define ATOMIC_HASH_L1_SHIFT 6
+#define ATOMIC_HASH_L1_SIZE (1 << ATOMIC_HASH_L1_SHIFT)
+
+/* Number of locks in each struct pointed to by atomic_lock_ptr[]. */
+#define ATOMIC_HASH_L2_SHIFT (CHIP_L2_LOG_LINE_SIZE() - 2)
+#define ATOMIC_HASH_L2_SIZE (1 << ATOMIC_HASH_L2_SHIFT)
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/*
+ * Number of atomic locks in atomic_locks[]. Must be a power of two.
+ * There is no reason for more than PAGE_SIZE / 8 entries, since that
+ * is the maximum number of pointer bits we can use to index this.
+ * And we cannot have more than PAGE_SIZE / 4, since this has to
+ * fit on a single page and each entry takes 4 bytes.
+ */
+#define ATOMIC_HASH_SHIFT (PAGE_SHIFT - 3)
+#define ATOMIC_HASH_SIZE (1 << ATOMIC_HASH_SHIFT)
+
+#ifndef __ASSEMBLY__
+extern int atomic_locks[];
+#endif
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/*
+ * All the code that may fault while holding an atomic lock must
+ * place the pointer to the lock in ATOMIC_LOCK_REG so the fault code
+ * can correctly release and reacquire the lock. Note that we
+ * mention the register number in a comment in "lib/atomic_asm.S" to help
+ * assembly coders from using this register by mistake, so if it
+ * is changed here, change that comment as well.
+ */
+#define ATOMIC_LOCK_REG 20
+#define ATOMIC_LOCK_REG_NAME r20
+
+#ifndef __ASSEMBLY__
+/* Called from setup to initialize a hash table to point to per_cpu locks. */
+void __init_atomic_per_cpu(void);
+
+#ifdef CONFIG_SMP
+/* Support releasing the atomic lock in do_page_fault_ics(). */
+void __atomic_fault_unlock(int *lock_ptr);
+#endif
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_ATOMIC_32_H */
diff --git a/arch/tile/include/asm/auxvec.h b/arch/tile/include/asm/auxvec.h
new file mode 100644
index 000000000000..1d393edb0641
--- /dev/null
+++ b/arch/tile/include/asm/auxvec.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_AUXVEC_H
+#define _ASM_TILE_AUXVEC_H
+
+/* No extensions to auxvec */
+
+#endif /* _ASM_TILE_AUXVEC_H */
diff --git a/arch/tile/include/asm/backtrace.h b/arch/tile/include/asm/backtrace.h
new file mode 100644
index 000000000000..6970bfcad549
--- /dev/null
+++ b/arch/tile/include/asm/backtrace.h
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _TILE_BACKTRACE_H
+#define _TILE_BACKTRACE_H
+
+
+
+#include <linux/types.h>
+
+#include <arch/chip.h>
+
+#if CHIP_VA_WIDTH() > 32
+typedef unsigned long long VirtualAddress;
+#else
+typedef unsigned int VirtualAddress;
+#endif
+
+
+/** Reads 'size' bytes from 'address' and writes the data to 'result'.
+ * Returns true if successful, else false (e.g. memory not readable).
+ */
+typedef bool (*BacktraceMemoryReader)(void *result,
+ VirtualAddress address,
+ unsigned int size,
+ void *extra);
+
+typedef struct {
+ /** Current PC. */
+ VirtualAddress pc;
+
+ /** Current stack pointer value. */
+ VirtualAddress sp;
+
+ /** Current frame pointer value (i.e. caller's stack pointer) */
+ VirtualAddress fp;
+
+ /** Internal use only: caller's PC for first frame. */
+ VirtualAddress initial_frame_caller_pc;
+
+ /** Internal use only: callback to read memory. */
+ BacktraceMemoryReader read_memory_func;
+
+ /** Internal use only: arbitrary argument to read_memory_func. */
+ void *read_memory_func_extra;
+
+} BacktraceIterator;
+
+
+/** Initializes a backtracer to start from the given location.
+ *
+ * If the frame pointer cannot be determined it is set to -1.
+ *
+ * @param state The state to be filled in.
+ * @param read_memory_func A callback that reads memory. If NULL, a default
+ * value is provided.
+ * @param read_memory_func_extra An arbitrary argument to read_memory_func.
+ * @param pc The current PC.
+ * @param lr The current value of the 'lr' register.
+ * @param sp The current value of the 'sp' register.
+ * @param r52 The current value of the 'r52' register.
+ */
+extern void backtrace_init(BacktraceIterator *state,
+ BacktraceMemoryReader read_memory_func,
+ void *read_memory_func_extra,
+ VirtualAddress pc, VirtualAddress lr,
+ VirtualAddress sp, VirtualAddress r52);
+
+
+/** Advances the backtracing state to the calling frame, returning
+ * true iff successful.
+ */
+extern bool backtrace_next(BacktraceIterator *state);
+
+
+typedef enum {
+
+ /* We have no idea what the caller's pc is. */
+ PC_LOC_UNKNOWN,
+
+ /* The caller's pc is currently in lr. */
+ PC_LOC_IN_LR,
+
+ /* The caller's pc can be found by dereferencing the caller's sp. */
+ PC_LOC_ON_STACK
+
+} CallerPCLocation;
+
+
+typedef enum {
+
+ /* We have no idea what the caller's sp is. */
+ SP_LOC_UNKNOWN,
+
+ /* The caller's sp is currently in r52. */
+ SP_LOC_IN_R52,
+
+ /* The caller's sp can be found by adding a certain constant
+ * to the current value of sp.
+ */
+ SP_LOC_OFFSET
+
+} CallerSPLocation;
+
+
+/* Bit values ORed into CALLER_* values for info ops. */
+enum {
+ /* Setting the low bit on any of these values means the info op
+ * applies only to one bundle ago.
+ */
+ ONE_BUNDLE_AGO_FLAG = 1,
+
+ /* Setting this bit on a CALLER_SP_* value means the PC is in LR.
+ * If not set, PC is on the stack.
+ */
+ PC_IN_LR_FLAG = 2,
+
+ /* This many of the low bits of a CALLER_SP_* value are for the
+ * flag bits above.
+ */
+ NUM_INFO_OP_FLAGS = 2,
+
+ /* We cannot have one in the memory pipe so this is the maximum. */
+ MAX_INFO_OPS_PER_BUNDLE = 2
+};
+
+
+/** Internal constants used to define 'info' operands. */
+enum {
+ /* 0 and 1 are reserved, as are all negative numbers. */
+
+ CALLER_UNKNOWN_BASE = 2,
+
+ CALLER_SP_IN_R52_BASE = 4,
+
+ CALLER_SP_OFFSET_BASE = 8
+};
+
+
+/** Current backtracer state describing where it thinks the caller is. */
+typedef struct {
+ /*
+ * Public fields
+ */
+
+ /* How do we find the caller's PC? */
+ CallerPCLocation pc_location : 8;
+
+ /* How do we find the caller's SP? */
+ CallerSPLocation sp_location : 8;
+
+ /* If sp_location == SP_LOC_OFFSET, then caller_sp == sp +
+ * loc->sp_offset. Else this field is undefined.
+ */
+ uint16_t sp_offset;
+
+ /* In the most recently visited bundle a terminating bundle? */
+ bool at_terminating_bundle;
+
+ /*
+ * Private fields
+ */
+
+ /* Will the forward scanner see someone clobbering sp
+ * (i.e. changing it with something other than addi sp, sp, N?)
+ */
+ bool sp_clobber_follows;
+
+ /* Operand to next "visible" info op (no more than one bundle past
+ * the next terminating bundle), or -32768 if none.
+ */
+ int16_t next_info_operand;
+
+ /* Is the info of in next_info_op in the very next bundle? */
+ bool is_next_info_operand_adjacent;
+
+} CallerLocation;
+
+
+
+
+#endif /* _TILE_BACKTRACE_H */
diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h
new file mode 100644
index 000000000000..84600f3514da
--- /dev/null
+++ b/arch/tile/include/asm/bitops.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright 1992, Linus Torvalds.
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_BITOPS_H
+#define _ASM_TILE_BITOPS_H
+
+#include <linux/types.h>
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#ifdef __tilegx__
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+
+/**
+ * __ffs - find first set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+ return __builtin_ctzl(word);
+}
+
+/**
+ * ffz - find first zero bit in word
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+ return __builtin_ctzl(~word);
+}
+
+/**
+ * __fls - find last set bit in word
+ * @word: The word to search
+ *
+ * Undefined if no set bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __fls(unsigned long word)
+{
+ return (sizeof(word) * 8) - 1 - __builtin_clzl(word);
+}
+
+/**
+ * ffs - find first set bit in word
+ * @x: the word to search
+ *
+ * This is defined the same way as the libc and compiler builtin ffs
+ * routines, therefore differs in spirit from the other bitops.
+ *
+ * ffs(value) returns 0 if value is 0 or the position of the first
+ * set bit if value is nonzero. The first (least significant) bit
+ * is at position 1.
+ */
+static inline int ffs(int x)
+{
+ return __builtin_ffs(x);
+}
+
+/**
+ * fls - find last set bit in word
+ * @x: the word to search
+ *
+ * This is defined in a similar way as the libc and compiler builtin
+ * ffs, but returns the position of the most significant set bit.
+ *
+ * fls(value) returns 0 if value is 0 or the position of the last
+ * set bit if value is nonzero. The last (most significant) bit is
+ * at position 32.
+ */
+static inline int fls(int x)
+{
+ return (sizeof(int) * 8) - __builtin_clz(x);
+}
+
+static inline int fls64(__u64 w)
+{
+ return (sizeof(__u64) * 8) - __builtin_clzll(w);
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+ return __builtin_popcount(w);
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+ return __builtin_popcount(w & 0xffff);
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+ return __builtin_popcount(w & 0xff);
+}
+
+static inline unsigned long hweight64(__u64 w)
+{
+ return __builtin_popcountll(w);
+}
+
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* _ASM_TILE_BITOPS_H */
diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h
new file mode 100644
index 000000000000..7a93c001ac19
--- /dev/null
+++ b/arch/tile/include/asm/bitops_32.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_BITOPS_32_H
+#define _ASM_TILE_BITOPS_32_H
+
+#include <linux/compiler.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/* Tile-specific routines to support <asm/bitops.h>. */
+unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask);
+unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask);
+unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask);
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.
+ * See __set_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(unsigned nr, volatile unsigned long *addr)
+{
+ _atomic_or(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.
+ * See __clear_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * clear_bit() may not contain a memory barrier, so if it is used for
+ * locking purposes, you should call smp_mb__before_clear_bit() and/or
+ * smp_mb__after_clear_bit() to ensure changes are visible on other cpus.
+ */
+static inline void clear_bit(unsigned nr, volatile unsigned long *addr)
+{
+ _atomic_andn(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * See __change_bit() if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(unsigned nr, volatile unsigned long *addr)
+{
+ _atomic_xor(addr + BIT_WORD(nr), BIT_MASK(nr));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(unsigned nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ addr += BIT_WORD(nr);
+ smp_mb(); /* barrier for proper semantics */
+ return (_atomic_or(addr, mask) & mask) != 0;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(unsigned nr, volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ addr += BIT_WORD(nr);
+ smp_mb(); /* barrier for proper semantics */
+ return (_atomic_andn(addr, mask) & mask) != 0;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(unsigned nr,
+ volatile unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ addr += BIT_WORD(nr);
+ smp_mb(); /* barrier for proper semantics */
+ return (_atomic_xor(addr, mask) & mask) != 0;
+}
+
+/* See discussion at smp_mb__before_atomic_dec() in <asm/atomic.h>. */
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() do {} while (0)
+
+#include <asm-generic/bitops/non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+
+#endif /* _ASM_TILE_BITOPS_32_H */
diff --git a/arch/tile/include/asm/bitsperlong.h b/arch/tile/include/asm/bitsperlong.h
new file mode 100644
index 000000000000..58c771f2af2f
--- /dev/null
+++ b/arch/tile/include/asm/bitsperlong.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_BITSPERLONG_H
+#define _ASM_TILE_BITSPERLONG_H
+
+#ifdef __LP64__
+# define __BITS_PER_LONG 64
+#else
+# define __BITS_PER_LONG 32
+#endif
+
+#include <asm-generic/bitsperlong.h>
+
+#endif /* _ASM_TILE_BITSPERLONG_H */
diff --git a/arch/tile/include/asm/bug.h b/arch/tile/include/asm/bug.h
new file mode 100644
index 000000000000..b12fd89e42e9
--- /dev/null
+++ b/arch/tile/include/asm/bug.h
@@ -0,0 +1 @@
+#include <asm-generic/bug.h>
diff --git a/arch/tile/include/asm/bugs.h b/arch/tile/include/asm/bugs.h
new file mode 100644
index 000000000000..61791e1ad9f5
--- /dev/null
+++ b/arch/tile/include/asm/bugs.h
@@ -0,0 +1 @@
+#include <asm-generic/bugs.h>
diff --git a/arch/tile/include/asm/byteorder.h b/arch/tile/include/asm/byteorder.h
new file mode 100644
index 000000000000..9558416d578b
--- /dev/null
+++ b/arch/tile/include/asm/byteorder.h
@@ -0,0 +1 @@
+#include <linux/byteorder/little_endian.h>
diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h
new file mode 100644
index 000000000000..c2b7dcfe5327
--- /dev/null
+++ b/arch/tile/include/asm/cache.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_CACHE_H
+#define _ASM_TILE_CACHE_H
+
+#include <arch/chip.h>
+
+/* bytes per L1 data cache line */
+#define L1_CACHE_SHIFT CHIP_L1D_LOG_LINE_SIZE()
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1)) & -L1_CACHE_BYTES)
+
+/* bytes per L1 instruction cache line */
+#define L1I_CACHE_SHIFT CHIP_L1I_LOG_LINE_SIZE()
+#define L1I_CACHE_BYTES (1 << L1I_CACHE_SHIFT)
+#define L1I_CACHE_ALIGN(x) (((x)+(L1I_CACHE_BYTES-1)) & -L1I_CACHE_BYTES)
+
+/* bytes per L2 cache line */
+#define L2_CACHE_SHIFT CHIP_L2_LOG_LINE_SIZE()
+#define L2_CACHE_BYTES (1 << L2_CACHE_SHIFT)
+#define L2_CACHE_ALIGN(x) (((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES)
+
+/* use the cache line size for the L2, which is where it counts */
+#define SMP_CACHE_BYTES_SHIFT L2_CACHE_SHIFT
+#define SMP_CACHE_BYTES L2_CACHE_BYTES
+#define INTERNODE_CACHE_SHIFT L2_CACHE_SHIFT
+#define INTERNODE_CACHE_BYTES L2_CACHE_BYTES
+
+/* Group together read-mostly things to avoid cache false sharing */
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+/*
+ * Attribute for data that is kept read/write coherent until the end of
+ * initialization, then bumped to read/only incoherent for performance.
+ */
+#define __write_once __attribute__((__section__(".w1data")))
+
+#endif /* _ASM_TILE_CACHE_H */
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
new file mode 100644
index 000000000000..7e2096a4ef7d
--- /dev/null
+++ b/arch/tile/include/asm/cacheflush.h
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_CACHEFLUSH_H
+#define _ASM_TILE_CACHEFLUSH_H
+
+#include <arch/chip.h>
+
+/* Keep includes the same across arches. */
+#include <linux/mm.h>
+#include <linux/cache.h>
+#include <asm/system.h>
+
+/* Caches are physically-indexed and so don't need special treatment */
+#define flush_cache_all() do { } while (0)
+#define flush_cache_mm(mm) do { } while (0)
+#define flush_cache_dup_mm(mm) do { } while (0)
+#define flush_cache_range(vma, start, end) do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do { } while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page) do { } while (0)
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+#define flush_cache_vmap(start, end) do { } while (0)
+#define flush_cache_vunmap(start, end) do { } while (0)
+#define flush_icache_page(vma, pg) do { } while (0)
+#define flush_icache_user_range(vma, pg, adr, len) do { } while (0)
+
+/* See "arch/tile/lib/__invalidate_icache.S". */
+extern void __invalidate_icache(unsigned long start, unsigned long size);
+
+/* Flush the icache just on this cpu */
+static inline void __flush_icache_range(unsigned long start, unsigned long end)
+{
+ __invalidate_icache(start, end - start);
+}
+
+/* Flush the entire icache on this cpu. */
+#define __flush_icache() __flush_icache_range(0, CHIP_L1I_CACHE_SIZE())
+
+#ifdef CONFIG_SMP
+/*
+ * When the kernel writes to its own text we need to do an SMP
+ * broadcast to make the L1I coherent everywhere. This includes
+ * module load and single step.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+#else
+#define flush_icache_range __flush_icache_range
+#endif
+
+/*
+ * An update to an executable user page requires icache flushing.
+ * We could carefully update only tiles that are running this process,
+ * and rely on the fact that we flush the icache on every context
+ * switch to avoid doing extra work here. But for now, I'll be
+ * conservative and just do a global icache flush.
+ */
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+ struct page *page, unsigned long vaddr,
+ void *dst, void *src, int len)
+{
+ memcpy(dst, src, len);
+ if (vma->vm_flags & VM_EXEC) {
+ flush_icache_range((unsigned long) dst,
+ (unsigned long) dst + len);
+ }
+}
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy((dst), (src), (len))
+
+/*
+ * Invalidate a VA range; pads to L2 cacheline boundaries.
+ *
+ * Note that on TILE64, __inv_buffer() actually flushes modified
+ * cache lines in addition to invalidating them, i.e., it's the
+ * same as __finv_buffer().
+ */
+static inline void __inv_buffer(void *buffer, size_t size)
+{
+ char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+ char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+ while (next < finish) {
+ __insn_inv(next);
+ next += CHIP_INV_STRIDE();
+ }
+}
+
+/* Flush a VA range; pads to L2 cacheline boundaries. */
+static inline void __flush_buffer(void *buffer, size_t size)
+{
+ char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+ char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+ while (next < finish) {
+ __insn_flush(next);
+ next += CHIP_FLUSH_STRIDE();
+ }
+}
+
+/* Flush & invalidate a VA range; pads to L2 cacheline boundaries. */
+static inline void __finv_buffer(void *buffer, size_t size)
+{
+ char *next = (char *)((long)buffer & -L2_CACHE_BYTES);
+ char *finish = (char *)L2_CACHE_ALIGN((long)buffer + size);
+ while (next < finish) {
+ __insn_finv(next);
+ next += CHIP_FINV_STRIDE();
+ }
+}
+
+
+/* Invalidate a VA range, then memory fence. */
+static inline void inv_buffer(void *buffer, size_t size)
+{
+ __inv_buffer(buffer, size);
+ mb_incoherent();
+}
+
+/* Flush a VA range, then memory fence. */
+static inline void flush_buffer(void *buffer, size_t size)
+{
+ __flush_buffer(buffer, size);
+ mb_incoherent();
+}
+
+/* Flush & invalidate a VA range, then memory fence. */
+static inline void finv_buffer(void *buffer, size_t size)
+{
+ __finv_buffer(buffer, size);
+ mb_incoherent();
+}
+
+#endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/checksum.h b/arch/tile/include/asm/checksum.h
new file mode 100644
index 000000000000..a120766c7264
--- /dev/null
+++ b/arch/tile/include/asm/checksum.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_CHECKSUM_H
+#define _ASM_TILE_CHECKSUM_H
+
+#include <asm-generic/checksum.h>
+
+/* Allow us to provide a more optimized do_csum(). */
+__wsum do_csum(const unsigned char *buff, int len);
+#define do_csum do_csum
+
+#endif /* _ASM_TILE_CHECKSUM_H */
diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h
new file mode 100644
index 000000000000..e133c53f6c4f
--- /dev/null
+++ b/arch/tile/include/asm/compat.h
@@ -0,0 +1,308 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_COMPAT_H
+#define _ASM_TILE_COMPAT_H
+
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ 100
+
+/* "long" and pointer-based types are different. */
+typedef s32 compat_long_t;
+typedef u32 compat_ulong_t;
+typedef u32 compat_size_t;
+typedef s32 compat_ssize_t;
+typedef s32 compat_off_t;
+typedef s32 compat_time_t;
+typedef s32 compat_clock_t;
+typedef u32 compat_ino_t;
+typedef u32 compat_caddr_t;
+typedef u32 compat_uptr_t;
+
+/* Many types are "int" or otherwise the same. */
+typedef __kernel_pid_t compat_pid_t;
+typedef __kernel_uid_t __compat_uid_t;
+typedef __kernel_gid_t __compat_gid_t;
+typedef __kernel_uid32_t __compat_uid32_t;
+typedef __kernel_uid32_t __compat_gid32_t;
+typedef __kernel_mode_t compat_mode_t;
+typedef __kernel_dev_t compat_dev_t;
+typedef __kernel_loff_t compat_loff_t;
+typedef __kernel_nlink_t compat_nlink_t;
+typedef __kernel_ipc_pid_t compat_ipc_pid_t;
+typedef __kernel_daddr_t compat_daddr_t;
+typedef __kernel_fsid_t compat_fsid_t;
+typedef __kernel_timer_t compat_timer_t;
+typedef __kernel_key_t compat_key_t;
+typedef int compat_int_t;
+typedef s64 compat_s64;
+typedef uint compat_uint_t;
+typedef u64 compat_u64;
+
+/* We use the same register dump format in 32-bit images. */
+typedef unsigned long compat_elf_greg_t;
+#define COMPAT_ELF_NGREG (sizeof(struct pt_regs) / sizeof(compat_elf_greg_t))
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+struct compat_timespec {
+ compat_time_t tv_sec;
+ s32 tv_nsec;
+};
+
+struct compat_timeval {
+ compat_time_t tv_sec;
+ s32 tv_usec;
+};
+
+struct compat_stat {
+ unsigned int st_dev;
+ unsigned int st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned int st_rdev;
+ unsigned int __pad1;
+ int st_size;
+ int st_blksize;
+ int __pad2;
+ int st_blocks;
+ int st_atime;
+ unsigned int st_atime_nsec;
+ int st_mtime;
+ unsigned int st_mtime_nsec;
+ int st_ctime;
+ unsigned int st_ctime_nsec;
+ unsigned int __unused[2];
+};
+
+struct compat_stat64 {
+ unsigned long st_dev;
+ unsigned long st_ino;
+ unsigned int st_mode;
+ unsigned int st_nlink;
+ unsigned int st_uid;
+ unsigned int st_gid;
+ unsigned long st_rdev;
+ long st_size;
+ unsigned int st_blksize;
+ unsigned long st_blocks __attribute__((packed));
+ unsigned int st_atime;
+ unsigned int st_atime_nsec;
+ unsigned int st_mtime;
+ unsigned int st_mtime_nsec;
+ unsigned int st_ctime;
+ unsigned int st_ctime_nsec;
+ unsigned int __unused8;
+};
+
+#define compat_statfs statfs
+
+struct compat_sysctl {
+ unsigned int name;
+ int nlen;
+ unsigned int oldval;
+ unsigned int oldlenp;
+ unsigned int newval;
+ unsigned int newlen;
+ unsigned int __unused[4];
+};
+
+
+struct compat_flock {
+ short l_type;
+ short l_whence;
+ compat_off_t l_start;
+ compat_off_t l_len;
+ compat_pid_t l_pid;
+};
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+struct compat_flock64 {
+ short l_type;
+ short l_whence;
+ compat_loff_t l_start;
+ compat_loff_t l_len;
+ compat_pid_t l_pid;
+};
+
+#define COMPAT_RLIM_INFINITY 0xffffffff
+
+#define _COMPAT_NSIG 64
+#define _COMPAT_NSIG_BPW 32
+
+typedef u32 compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX 0x7fffffff
+#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+ compat_key_t key;
+ __compat_uid32_t uid;
+ __compat_gid32_t gid;
+ __compat_uid32_t cuid;
+ __compat_gid32_t cgid;
+ unsigned short mode;
+ unsigned short __pad1;
+ unsigned short seq;
+ unsigned short __pad2;
+ compat_ulong_t unused1;
+ compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+ struct compat_ipc64_perm sem_perm;
+ compat_time_t sem_otime;
+ compat_ulong_t __unused1;
+ compat_time_t sem_ctime;
+ compat_ulong_t __unused2;
+ compat_ulong_t sem_nsems;
+ compat_ulong_t __unused3;
+ compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+ struct compat_ipc64_perm msg_perm;
+ compat_time_t msg_stime;
+ compat_ulong_t __unused1;
+ compat_time_t msg_rtime;
+ compat_ulong_t __unused2;
+ compat_time_t msg_ctime;
+ compat_ulong_t __unused3;
+ compat_ulong_t msg_cbytes;
+ compat_ulong_t msg_qnum;
+ compat_ulong_t msg_qbytes;
+ compat_pid_t msg_lspid;
+ compat_pid_t msg_lrpid;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+ struct compat_ipc64_perm shm_perm;
+ compat_size_t shm_segsz;
+ compat_time_t shm_atime;
+ compat_ulong_t __unused1;
+ compat_time_t shm_dtime;
+ compat_ulong_t __unused2;
+ compat_time_t shm_ctime;
+ compat_ulong_t __unused3;
+ compat_pid_t shm_cpid;
+ compat_pid_t shm_lpid;
+ compat_ulong_t shm_nattch;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+ return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+ return (u32)(unsigned long)uptr;
+}
+
+/* Sign-extend when storing a kernel pointer to a user's ptregs. */
+static inline unsigned long ptr_to_compat_reg(void __user *uptr)
+{
+ return (long)(int)(long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+ struct pt_regs *regs = task_pt_regs(current);
+ return (void __user *)regs->sp - len;
+}
+
+static inline int is_compat_task(void)
+{
+ return current_thread_info()->status & TS_COMPAT;
+}
+
+extern int compat_setup_rt_frame(int sig, struct k_sigaction *ka,
+ siginfo_t *info, sigset_t *set,
+ struct pt_regs *regs);
+
+/* Compat syscalls. */
+struct compat_sigaction;
+struct compat_siginfo;
+struct compat_sigaltstack;
+long compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+ compat_uptr_t __user *envp);
+long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
+ struct compat_sigaction __user *oact,
+ size_t sigsetsize);
+long compat_sys_rt_sigqueueinfo(int pid, int sig,
+ struct compat_siginfo __user *uinfo);
+long compat_sys_rt_sigreturn(void);
+long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+ struct compat_sigaltstack __user *uoss_ptr);
+long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high);
+long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high);
+long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count,
+ u32 dummy, u32 low, u32 high);
+long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count,
+ u32 dummy, u32 low, u32 high);
+long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len);
+long compat_sys_sync_file_range2(int fd, unsigned int flags,
+ u32 offset_lo, u32 offset_hi,
+ u32 nbytes_lo, u32 nbytes_hi);
+long compat_sys_fallocate(int fd, int mode,
+ u32 offset_lo, u32 offset_hi,
+ u32 len_lo, u32 len_hi);
+long compat_sys_stat64(char __user *filename,
+ struct compat_stat64 __user *statbuf);
+long compat_sys_lstat64(char __user *filename,
+ struct compat_stat64 __user *statbuf);
+long compat_sys_fstat64(unsigned int fd, struct compat_stat64 __user *statbuf);
+long compat_sys_fstatat64(int dfd, char __user *filename,
+ struct compat_stat64 __user *statbuf, int flag);
+long compat_sys_sched_rr_get_interval(compat_pid_t pid,
+ struct compat_timespec __user *interval);
+ssize_t compat_sys_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
+ size_t count);
+
+/* Versions of compat functions that differ from generic Linux. */
+struct compat_msgbuf;
+long tile_compat_sys_msgsnd(int msqid,
+ struct compat_msgbuf __user *msgp,
+ size_t msgsz, int msgflg);
+long tile_compat_sys_msgrcv(int msqid,
+ struct compat_msgbuf __user *msgp,
+ size_t msgsz, long msgtyp, int msgflg);
+long tile_compat_sys_ptrace(compat_long_t request, compat_long_t pid,
+ compat_long_t addr, compat_long_t data);
+
+/* Tilera Linux syscalls that don't have "compat" versions. */
+#define compat_sys_raise_fpe sys_raise_fpe
+#define compat_sys_flush_cache sys_flush_cache
+
+#endif /* _ASM_TILE_COMPAT_H */
diff --git a/arch/tile/include/asm/cputime.h b/arch/tile/include/asm/cputime.h
new file mode 100644
index 000000000000..6d68ad7e0ea3
--- /dev/null
+++ b/arch/tile/include/asm/cputime.h
@@ -0,0 +1 @@
+#include <asm-generic/cputime.h>
diff --git a/arch/tile/include/asm/current.h b/arch/tile/include/asm/current.h
new file mode 100644
index 000000000000..da21acf020d3
--- /dev/null
+++ b/arch/tile/include/asm/current.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_CURRENT_H
+#define _ASM_TILE_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+ return current_thread_info()->task;
+}
+#define current get_current()
+
+/* Return a usable "task_struct" pointer even if the real one is corrupt. */
+struct task_struct *validate_current(void);
+
+#endif /* _ASM_TILE_CURRENT_H */
diff --git a/arch/tile/include/asm/delay.h b/arch/tile/include/asm/delay.h
new file mode 100644
index 000000000000..97b0e69e704e
--- /dev/null
+++ b/arch/tile/include/asm/delay.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_DELAY_H
+#define _ASM_TILE_DELAY_H
+
+/* Undefined functions to get compile-time errors. */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+ ((n) > 20000 ? __bad_udelay() : __ndelay((n) * 1000)) : \
+ __udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+ ((n) > 20000 ? __bad_ndelay() : __ndelay(n)) : \
+ __ndelay(n))
+
+#endif /* _ASM_TILE_DELAY_H */
diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h
new file mode 100644
index 000000000000..f0a4c256403b
--- /dev/null
+++ b/arch/tile/include/asm/device.h
@@ -0,0 +1 @@
+#include <asm-generic/device.h>
diff --git a/arch/tile/include/asm/div64.h b/arch/tile/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/tile/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..cf466b39aa13
--- /dev/null
+++ b/arch/tile/include/asm/dma-mapping.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_DMA_MAPPING_H
+#define _ASM_TILE_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/cache.h>
+#include <linux/io.h>
+
+/*
+ * Note that on x86 and powerpc, there is a "struct dma_mapping_ops"
+ * that is used for all the DMA operations. For now, we don't have an
+ * equivalent on tile, because we only have a single way of doing DMA.
+ * (Tilera bug 7994 to use dma_mapping_ops.)
+ */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction);
+extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction);
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction);
+
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+extern void dma_sync_single_for_cpu(struct device *, dma_addr_t, size_t,
+ enum dma_data_direction);
+extern void dma_sync_single_for_device(struct device *, dma_addr_t,
+ size_t, enum dma_data_direction);
+extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t,
+ unsigned long offset, size_t,
+ enum dma_data_direction);
+extern void dma_sync_single_range_for_device(struct device *, dma_addr_t,
+ unsigned long offset, size_t,
+ enum dma_data_direction);
+extern void dma_cache_sync(void *vaddr, size_t, enum dma_data_direction);
+
+static inline int
+dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+static inline int
+dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline int
+dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+static inline int
+dma_get_cache_alignment(void)
+{
+ return L2_CACHE_BYTES;
+}
+
+#define dma_is_consistent(d, h) (1)
+
+
+#endif /* _ASM_TILE_DMA_MAPPING_H */
diff --git a/arch/tile/include/asm/dma.h b/arch/tile/include/asm/dma.h
new file mode 100644
index 000000000000..12a7ca16d164
--- /dev/null
+++ b/arch/tile/include/asm/dma.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_DMA_H
+#define _ASM_TILE_DMA_H
+
+#include <asm-generic/dma.h>
+
+/* Needed by drivers/pci/quirks.c */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#endif
+
+#endif /* _ASM_TILE_DMA_H */
diff --git a/arch/tile/include/asm/elf.h b/arch/tile/include/asm/elf.h
new file mode 100644
index 000000000000..1bca0debdb0f
--- /dev/null
+++ b/arch/tile/include/asm/elf.h
@@ -0,0 +1,169 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_ELF_H
+#define _ASM_TILE_ELF_H
+
+/*
+ * ELF register definitions.
+ */
+
+#include <arch/chip.h>
+
+#include <linux/ptrace.h>
+#include <asm/byteorder.h>
+#include <asm/page.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+#define EM_TILE64 187
+#define EM_TILEPRO 188
+#define EM_TILEGX 191
+
+/* Provide a nominal data structure. */
+#define ELF_NFPREG 0
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+#ifdef __tilegx__
+#define ELF_CLASS ELFCLASS64
+#else
+#define ELF_CLASS ELFCLASS32
+#endif
+#define ELF_DATA ELFDATA2LSB
+
+/*
+ * There seems to be a bug in how compat_binfmt_elf.c works: it
+ * #undefs ELF_ARCH, but it is then used in binfmt_elf.c for fill_note_info().
+ * Hack around this by providing an enum value of ELF_ARCH.
+ */
+enum { ELF_ARCH = CHIP_ELF_TYPE() };
+#define ELF_ARCH ELF_ARCH
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+ ((x)->e_ident[EI_CLASS] == ELF_CLASS && \
+ ((x)->e_machine == CHIP_ELF_TYPE() || \
+ (x)->e_machine == CHIP_COMPAT_ELF_TYPE()))
+
+/* The module loader only handles a few relocation types. */
+#ifndef __tilegx__
+#define R_TILE_32 1
+#define R_TILE_JOFFLONG_X1 15
+#define R_TILE_IMM16_X0_LO 25
+#define R_TILE_IMM16_X1_LO 26
+#define R_TILE_IMM16_X0_HA 29
+#define R_TILE_IMM16_X1_HA 30
+#else
+#define R_TILEGX_64 1
+#define R_TILEGX_JUMPOFF_X1 21
+#define R_TILEGX_IMM16_X0_HW0 36
+#define R_TILEGX_IMM16_X1_HW0 37
+#define R_TILEGX_IMM16_X0_HW1 38
+#define R_TILEGX_IMM16_X1_HW1 39
+#define R_TILEGX_IMM16_X0_HW2_LAST 48
+#define R_TILEGX_IMM16_X1_HW2_LAST 49
+#endif
+
+/* Use standard page size for core dumps. */
+#define ELF_EXEC_PAGESIZE PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ * use of this is to invoke "./ld.so someprog" to test out a new version of
+ * the loader. We need to make sure that it is out of the way of the program
+ * that it will "exec", and that there is sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE (TASK_SIZE / 3 * 2)
+
+#define ELF_CORE_COPY_REGS(_dest, _regs) \
+ memcpy((char *) &_dest, (char *) _regs, \
+ sizeof(struct pt_regs));
+
+/* No additional FP registers to copy. */
+#define ELF_CORE_COPY_FPREGS(t, fpu) 0
+
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this CPU supports. This could be done in user space,
+ * but it's not easy, and we've already done it here.
+ */
+#define ELF_HWCAP (0)
+
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization. This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ */
+#define ELF_PLATFORM (NULL)
+
+extern void elf_plat_init(struct pt_regs *regs, unsigned long load_addr);
+
+#define ELF_PLAT_INIT(_r, load_addr) elf_plat_init(_r, load_addr)
+
+extern int dump_task_regs(struct task_struct *, elf_gregset_t *);
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+
+/* Tilera Linux has no personalities currently, so no need to do anything. */
+#define SET_PERSONALITY(ex) do { } while (0)
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+/* Support auto-mapping of the user interrupt vectors. */
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int executable_stack);
+#ifdef CONFIG_COMPAT
+
+#define COMPAT_ELF_PLATFORM "tilegx-m32"
+
+/*
+ * "Compat" binaries have the same machine type, but 32-bit class,
+ * since they're not a separate machine type, but just a 32-bit
+ * variant of the standard 64-bit architecture.
+ */
+#define compat_elf_check_arch(x) \
+ ((x)->e_ident[EI_CLASS] == ELFCLASS32 && \
+ ((x)->e_machine == CHIP_ELF_TYPE() || \
+ (x)->e_machine == CHIP_COMPAT_ELF_TYPE()))
+
+#define compat_start_thread(regs, ip, usp) do { \
+ regs->pc = ptr_to_compat_reg((void *)(ip)); \
+ regs->sp = ptr_to_compat_reg((void *)(usp)); \
+ } while (0)
+
+/*
+ * Use SET_PERSONALITY to indicate compatibility via TS_COMPAT.
+ */
+#undef SET_PERSONALITY
+#define SET_PERSONALITY(ex) \
+do { \
+ current->personality = PER_LINUX; \
+ current_thread_info()->status &= ~TS_COMPAT; \
+} while (0)
+#define COMPAT_SET_PERSONALITY(ex) \
+do { \
+ current->personality = PER_LINUX_32BIT; \
+ current_thread_info()->status |= TS_COMPAT; \
+} while (0)
+
+#define COMPAT_ELF_ET_DYN_BASE (0xffffffff / 3 * 2)
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* _ASM_TILE_ELF_H */
diff --git a/arch/tile/include/asm/emergency-restart.h b/arch/tile/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/tile/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/tile/include/asm/errno.h b/arch/tile/include/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/arch/tile/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/tile/include/asm/fcntl.h b/arch/tile/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/tile/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h
new file mode 100644
index 000000000000..51537ff9265a
--- /dev/null
+++ b/arch/tile/include/asm/fixmap.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright (C) 1998 Ingo Molnar
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_FIXMAP_H
+#define _ASM_TILE_FIXMAP_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of supervisor virtual memory backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * higher than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ *
+ * We don't bother with a FIX_HOLE since above the fixmaps
+ * is unmapped memory in any case.
+ */
+enum fixed_addresses {
+#ifdef CONFIG_HIGHMEM
+ FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
+ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+ __end_of_permanent_fixed_addresses,
+
+ /*
+ * Temporary boot-time mappings, used before ioremap() is functional.
+ * Not currently needed by the Tile architecture.
+ */
+#define NR_FIX_BTMAPS 0
+#if NR_FIX_BTMAPS
+ FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+ FIX_BTMAP_BEGIN = FIX_BTMAP_END + NR_FIX_BTMAPS - 1,
+ __end_of_fixed_addresses
+#else
+ __end_of_fixed_addresses = __end_of_permanent_fixed_addresses
+#endif
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+ unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+ __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+ __set_fixmap(idx, 0, __pgprot(0))
+
+#define __FIXADDR_SIZE (__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define __FIXADDR_BOOT_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START (FIXADDR_TOP + PAGE_SIZE - __FIXADDR_SIZE)
+#define FIXADDR_BOOT_START (FIXADDR_TOP + PAGE_SIZE - __FIXADDR_BOOT_SIZE)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+ /*
+ * this branch gets completely eliminated after inlining,
+ * except when someone tries to use fixaddr indices in an
+ * illegal way. (such as mixing up address types or using
+ * out-of-range indices).
+ *
+ * If it doesn't get removed, the linker will complain
+ * loudly with a reasonably clear error message..
+ */
+ if (idx >= __end_of_fixed_addresses)
+ __this_fixmap_does_not_exist();
+
+ return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+ BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+ return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_FIXMAP_H */
diff --git a/arch/tile/include/asm/ftrace.h b/arch/tile/include/asm/ftrace.h
new file mode 100644
index 000000000000..461459b06d98
--- /dev/null
+++ b/arch/tile/include/asm/ftrace.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_FTRACE_H
+#define _ASM_TILE_FTRACE_H
+
+/* empty */
+
+#endif /* _ASM_TILE_FTRACE_H */
diff --git a/arch/tile/include/asm/futex.h b/arch/tile/include/asm/futex.h
new file mode 100644
index 000000000000..9eaeb3c08786
--- /dev/null
+++ b/arch/tile/include/asm/futex.h
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * These routines make two important assumptions:
+ *
+ * 1. atomic_t is really an int and can be freely cast back and forth
+ * (validated in __init_atomic_per_cpu).
+ *
+ * 2. userspace uses sys_cmpxchg() for all atomic operations, thus using
+ * the same locking convention that all the kernel atomic routines use.
+ */
+
+#ifndef _ASM_TILE_FUTEX_H
+#define _ASM_TILE_FUTEX_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <linux/errno.h>
+
+extern struct __get_user futex_set(int *v, int i);
+extern struct __get_user futex_add(int *v, int n);
+extern struct __get_user futex_or(int *v, int n);
+extern struct __get_user futex_andn(int *v, int n);
+extern struct __get_user futex_cmpxchg(int *v, int o, int n);
+
+#ifndef __tilegx__
+extern struct __get_user futex_xor(int *v, int n);
+#else
+static inline struct __get_user futex_xor(int __user *uaddr, int n)
+{
+ struct __get_user asm_ret = __get_user_4(uaddr);
+ if (!asm_ret.err) {
+ int oldval, newval;
+ do {
+ oldval = asm_ret.val;
+ newval = oldval ^ n;
+ asm_ret = futex_cmpxchg(uaddr, oldval, newval);
+ } while (asm_ret.err == 0 && oldval != asm_ret.val);
+ }
+ return asm_ret;
+}
+#endif
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int ret;
+ struct __get_user asm_ret;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+ switch (op) {
+ case FUTEX_OP_SET:
+ asm_ret = futex_set(uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ asm_ret = futex_add(uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ asm_ret = futex_or(uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ asm_ret = futex_andn(uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ asm_ret = futex_xor(uaddr, oparg);
+ break;
+ default:
+ asm_ret.err = -ENOSYS;
+ }
+ pagefault_enable();
+
+ ret = asm_ret.err;
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ:
+ ret = (asm_ret.val == cmparg);
+ break;
+ case FUTEX_OP_CMP_NE:
+ ret = (asm_ret.val != cmparg);
+ break;
+ case FUTEX_OP_CMP_LT:
+ ret = (asm_ret.val < cmparg);
+ break;
+ case FUTEX_OP_CMP_GE:
+ ret = (asm_ret.val >= cmparg);
+ break;
+ case FUTEX_OP_CMP_LE:
+ ret = (asm_ret.val <= cmparg);
+ break;
+ case FUTEX_OP_CMP_GT:
+ ret = (asm_ret.val > cmparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval,
+ int newval)
+{
+ struct __get_user asm_ret;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ asm_ret = futex_cmpxchg(uaddr, oldval, newval);
+ return asm_ret.err ? asm_ret.err : asm_ret.val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_FUTEX_H */
diff --git a/arch/tile/include/asm/hardirq.h b/arch/tile/include/asm/hardirq.h
new file mode 100644
index 000000000000..822390f9a154
--- /dev/null
+++ b/arch/tile/include/asm/hardirq.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_HARDIRQ_H
+#define _ASM_TILE_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+#include <asm/irq.h>
+
+typedef struct {
+ unsigned int __softirq_pending;
+ long idle_timestamp;
+
+ /* Hard interrupt statistics. */
+ unsigned int irq_timer_count;
+ unsigned int irq_syscall_count;
+ unsigned int irq_resched_count;
+ unsigned int irq_hv_flush_count;
+ unsigned int irq_call_count;
+ unsigned int irq_hv_msg_count;
+ unsigned int irq_dev_intr_count;
+
+} ____cacheline_aligned irq_cpustat_t;
+
+DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+
+#define __ARCH_IRQ_STAT
+#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
+
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
+
+#endif /* _ASM_TILE_HARDIRQ_H */
diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h
new file mode 100644
index 000000000000..efdd12e91020
--- /dev/null
+++ b/arch/tile/include/asm/highmem.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ * Gerhard.Wichert@pdb.siemens.de
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ */
+
+#ifndef _ASM_TILE_HIGHMEM_H
+#define _ASM_TILE_HIGHMEM_H
+
+#include <linux/interrupt.h>
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *pkmap_page_table;
+
+/*
+ * Ordering is:
+ *
+ * FIXADDR_TOP
+ * fixed_addresses
+ * FIXADDR_START
+ * temp fixed addresses
+ * FIXADDR_BOOT_START
+ * Persistent kmap area
+ * PKMAP_BASE
+ * VMALLOC_END
+ * Vmalloc area
+ * VMALLOC_START
+ * high_memory
+ */
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+void *kmap_high(struct page *page);
+void kunmap_high(struct page *page);
+void *kmap(struct page *page);
+void kunmap(struct page *page);
+void *kmap_fix_kpte(struct page *page, int finished);
+
+/* This macro is used only in map_new_virtual() to map "page". */
+#define kmap_prot page_to_kpgprot(page)
+
+void kunmap_atomic(void *kvaddr, enum km_type type);
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot);
+struct page *kmap_atomic_to_page(void *ptr);
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot);
+void *kmap_atomic(struct page *page, enum km_type type);
+void kmap_atomic_fix_kpte(struct page *page, int finished);
+
+#define flush_cache_kmaps() do { } while (0)
+
+#endif /* _ASM_TILE_HIGHMEM_H */
diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h
new file mode 100644
index 000000000000..a8243865d49e
--- /dev/null
+++ b/arch/tile/include/asm/homecache.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Handle issues around the Tile "home cache" model of coherence.
+ */
+
+#ifndef _ASM_TILE_HOMECACHE_H
+#define _ASM_TILE_HOMECACHE_H
+
+#include <asm/page.h>
+#include <linux/cpumask.h>
+
+struct page;
+struct task_struct;
+struct vm_area_struct;
+struct zone;
+
+/*
+ * Coherence point for the page is its memory controller.
+ * It is not present in any cache (L1 or L2).
+ */
+#define PAGE_HOME_UNCACHED -1
+
+/*
+ * Is this page immutable (unwritable) and thus able to be cached more
+ * widely than would otherwise be possible? On tile64 this means we
+ * mark the PTE to cache locally; on tilepro it means we have "nc" set.
+ */
+#define PAGE_HOME_IMMUTABLE -2
+
+/*
+ * Each cpu considers its own cache to be the home for the page,
+ * which makes it incoherent.
+ */
+#define PAGE_HOME_INCOHERENT -3
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Home for the page is distributed via hash-for-home. */
+#define PAGE_HOME_HASH -4
+#endif
+
+/* Homing is unknown or unspecified. Not valid for page_home(). */
+#define PAGE_HOME_UNKNOWN -5
+
+/* Home on the current cpu. Not valid for page_home(). */
+#define PAGE_HOME_HERE -6
+
+/* Support wrapper to use instead of explicit hv_flush_remote(). */
+extern void flush_remote(unsigned long cache_pfn, unsigned long cache_length,
+ const struct cpumask *cache_cpumask,
+ HV_VirtAddr tlb_va, unsigned long tlb_length,
+ unsigned long tlb_pgsize,
+ const struct cpumask *tlb_cpumask,
+ HV_Remote_ASID *asids, int asidcount);
+
+/* Set homing-related bits in a PTE (can also pass a pgprot_t). */
+extern pte_t pte_set_home(pte_t pte, int home);
+
+/* Do a cache eviction on the specified cpus. */
+extern void homecache_evict(const struct cpumask *mask);
+
+/*
+ * Change a kernel page's homecache. It must not be mapped in user space.
+ * If !CONFIG_HOMECACHE, only usable on LOWMEM, and can only be called when
+ * no other cpu can reference the page, and causes a full-chip cache/TLB flush.
+ */
+extern void homecache_change_page_home(struct page *, int order, int home);
+
+/*
+ * Flush a page out of whatever cache(s) it is in.
+ * This is more than just finv, since it properly handles waiting
+ * for the data to reach memory on tilepro, but it can be quite
+ * heavyweight, particularly on hash-for-home memory.
+ */
+extern void homecache_flush_cache(struct page *, int order);
+
+/*
+ * Allocate a page with the given GFP flags, home, and optionally
+ * node. These routines are actually just wrappers around the normal
+ * alloc_pages() / alloc_pages_node() functions, which set and clear
+ * a per-cpu variable to communicate with homecache_new_kernel_page().
+ * If !CONFIG_HOMECACHE, uses homecache_change_page_home().
+ */
+extern struct page *homecache_alloc_pages(gfp_t gfp_mask,
+ unsigned int order, int home);
+extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
+ unsigned int order, int home);
+#define homecache_alloc_page(gfp_mask, home) \
+ homecache_alloc_pages(gfp_mask, 0, home)
+
+/*
+ * These routines are just pass-throughs to free_pages() when
+ * we support full homecaching. If !CONFIG_HOMECACHE, then these
+ * routines use homecache_change_page_home() to reset the home
+ * back to the default before returning the page to the allocator.
+ */
+void homecache_free_pages(unsigned long addr, unsigned int order);
+#define homecache_free_page(page) \
+ homecache_free_pages((page), 0)
+
+
+
+/*
+ * Report the page home for LOWMEM pages by examining their kernel PTE,
+ * or for highmem pages as the default home.
+ */
+extern int page_home(struct page *);
+
+#define homecache_migrate_kthread() do {} while (0)
+
+#define homecache_kpte_lock() 0
+#define homecache_kpte_unlock(flags) do {} while (0)
+
+
+#endif /* _ASM_TILE_HOMECACHE_H */
diff --git a/arch/tile/include/asm/hugetlb.h b/arch/tile/include/asm/hugetlb.h
new file mode 100644
index 000000000000..0521c277bbde
--- /dev/null
+++ b/arch/tile/include/asm/hugetlb.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_HUGETLB_H
+#define _ASM_TILE_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+ unsigned long addr,
+ unsigned long len) {
+ return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+ unsigned long addr, unsigned long len)
+{
+ struct hstate *h = hstate_file(file);
+ if (len & ~huge_page_mask(h))
+ return -EINVAL;
+ if (addr & ~huge_page_mask(h))
+ return -EINVAL;
+ return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+ unsigned long addr, unsigned long end,
+ unsigned long floor,
+ unsigned long ceiling)
+{
+ free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pte)
+{
+ set_pte_order(ptep, pte, HUGETLB_PAGE_ORDER);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+ ptep_clear_flush(vma, addr, ptep);
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+ return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+ return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep,
+ pte_t pte, int dirty)
+{
+ return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+ return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+ return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_TILE_HUGETLB_H */
diff --git a/arch/tile/include/asm/hv_driver.h b/arch/tile/include/asm/hv_driver.h
new file mode 100644
index 000000000000..ad614de899b3
--- /dev/null
+++ b/arch/tile/include/asm/hv_driver.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This header defines a wrapper interface for managing hypervisor
+ * device calls that will result in an interrupt at some later time.
+ * In particular, this provides wrappers for hv_preada() and
+ * hv_pwritea().
+ */
+
+#ifndef _ASM_TILE_HV_DRIVER_H
+#define _ASM_TILE_HV_DRIVER_H
+
+#include <hv/hypervisor.h>
+
+struct hv_driver_cb;
+
+/* A callback to be invoked when an operation completes. */
+typedef void hv_driver_callback_t(struct hv_driver_cb *cb, __hv32 result);
+
+/*
+ * A structure to hold information about an outstanding call.
+ * The driver must allocate a separate structure for each call.
+ */
+struct hv_driver_cb {
+ hv_driver_callback_t *callback; /* Function to call on interrupt. */
+ void *dev; /* Driver-specific state variable. */
+};
+
+/* Wrapper for invoking hv_dev_preada(). */
+static inline int
+tile_hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len,
+ HV_SGL sgl[/* sgl_len */], __hv64 offset,
+ struct hv_driver_cb *callback)
+{
+ return hv_dev_preada(devhdl, flags, sgl_len, sgl,
+ offset, (HV_IntArg)callback);
+}
+
+/* Wrapper for invoking hv_dev_pwritea(). */
+static inline int
+tile_hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len,
+ HV_SGL sgl[/* sgl_len */], __hv64 offset,
+ struct hv_driver_cb *callback)
+{
+ return hv_dev_pwritea(devhdl, flags, sgl_len, sgl,
+ offset, (HV_IntArg)callback);
+}
+
+
+#endif /* _ASM_TILE_HV_DRIVER_H */
diff --git a/arch/tile/include/asm/hw_irq.h b/arch/tile/include/asm/hw_irq.h
new file mode 100644
index 000000000000..4fac5fbf333e
--- /dev/null
+++ b/arch/tile/include/asm/hw_irq.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_HW_IRQ_H
+#define _ASM_TILE_HW_IRQ_H
+
+#endif /* _ASM_TILE_HW_IRQ_H */
diff --git a/arch/tile/include/asm/ide.h b/arch/tile/include/asm/ide.h
new file mode 100644
index 000000000000..3c6f2ed894ce
--- /dev/null
+++ b/arch/tile/include/asm/ide.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_IDE_H
+#define _ASM_TILE_IDE_H
+
+/* For IDE on PCI */
+#define MAX_HWIFS 10
+
+#define ide_default_io_ctl(base) (0)
+
+#include <asm-generic/ide_iops.h>
+
+#endif /* _ASM_TILE_IDE_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
new file mode 100644
index 000000000000..8c95bef3fa45
--- /dev/null
+++ b/arch/tile/include/asm/io.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_IO_H
+#define _ASM_TILE_IO_H
+
+#include <linux/kernel.h>
+#include <linux/bug.h>
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT 0xfffffffful
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access.
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer.
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
+ * long before casting it to a pointer to avoid compiler warnings.
+ */
+#if CHIP_HAS_MMIO()
+extern void __iomem *ioremap(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+ pgprot_t pgprot);
+extern void iounmap(volatile void __iomem *addr);
+#else
+#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
+#define iounmap(addr) ((void)0)
+#endif
+
+#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
+#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
+#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
+
+void __iomem *ioport_map(unsigned long port, unsigned int len);
+extern inline void ioport_unmap(void __iomem *addr) {}
+
+#define mmiowb()
+
+/* Conversion between virtual and physical mappings. */
+#define mm_ptov(addr) ((void *)phys_to_virt(addr))
+#define mm_vtop(addr) ((unsigned long)virt_to_phys(addr))
+
+#ifdef CONFIG_PCI
+
+extern u8 _tile_readb(unsigned long addr);
+extern u16 _tile_readw(unsigned long addr);
+extern u32 _tile_readl(unsigned long addr);
+extern u64 _tile_readq(unsigned long addr);
+extern void _tile_writeb(u8 val, unsigned long addr);
+extern void _tile_writew(u16 val, unsigned long addr);
+extern void _tile_writel(u32 val, unsigned long addr);
+extern void _tile_writeq(u64 val, unsigned long addr);
+
+#else
+
+/*
+ * The Tile architecture does not support IOMEM unless PCI is enabled.
+ * Unfortunately we can't yet simply not declare these methods,
+ * since some generic code that compiles into the kernel, but
+ * we never run, uses them unconditionally.
+ */
+
+static inline int iomem_panic(void)
+{
+ panic("readb/writeb and friends do not exist on tile without PCI");
+ return 0;
+}
+
+static inline u8 _tile_readb(unsigned long addr)
+{
+ return iomem_panic();
+}
+
+static inline u16 _tile_readw(unsigned long addr)
+{
+ return iomem_panic();
+}
+
+static inline u32 _tile_readl(unsigned long addr)
+{
+ return iomem_panic();
+}
+
+static inline u64 _tile_readq(unsigned long addr)
+{
+ return iomem_panic();
+}
+
+static inline void _tile_writeb(u8 val, unsigned long addr)
+{
+ iomem_panic();
+}
+
+static inline void _tile_writew(u16 val, unsigned long addr)
+{
+ iomem_panic();
+}
+
+static inline void _tile_writel(u32 val, unsigned long addr)
+{
+ iomem_panic();
+}
+
+static inline void _tile_writeq(u64 val, unsigned long addr)
+{
+ iomem_panic();
+}
+
+#endif
+
+#define readb(addr) _tile_readb((unsigned long)addr)
+#define readw(addr) _tile_readw((unsigned long)addr)
+#define readl(addr) _tile_readl((unsigned long)addr)
+#define readq(addr) _tile_readq((unsigned long)addr)
+#define writeb(val, addr) _tile_writeb(val, (unsigned long)addr)
+#define writew(val, addr) _tile_writew(val, (unsigned long)addr)
+#define writel(val, addr) _tile_writel(val, (unsigned long)addr)
+#define writeq(val, addr) _tile_writeq(val, (unsigned long)addr)
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_readq readq
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+#define __raw_writeq writeq
+
+#define readb_relaxed readb
+#define readw_relaxed readw
+#define readl_relaxed readl
+#define readq_relaxed readq
+
+#define ioread8 readb
+#define ioread16 readw
+#define ioread32 readl
+#define ioread64 readq
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+#define iowrite64 writeq
+
+static inline void *memcpy_fromio(void *dst, void *src, int len)
+{
+ int x;
+ BUG_ON((unsigned long)src & 0x3);
+ for (x = 0; x < len; x += 4)
+ *(u32 *)(dst + x) = readl(src + x);
+ return dst;
+}
+
+static inline void *memcpy_toio(void *dst, void *src, int len)
+{
+ int x;
+ BUG_ON((unsigned long)dst & 0x3);
+ for (x = 0; x < len; x += 4)
+ writel(*(u32 *)(src + x), dst + x);
+ return dst;
+}
+
+/*
+ * The Tile architecture does not support IOPORT, even with PCI.
+ * Unfortunately we can't yet simply not declare these methods,
+ * since some generic code that compiles into the kernel, but
+ * we never run, uses them unconditionally.
+ */
+
+static inline int ioport_panic(void)
+{
+ panic("inb/outb and friends do not exist on tile");
+ return 0;
+}
+
+static inline u8 inb(unsigned long addr)
+{
+ return ioport_panic();
+}
+
+static inline u16 inw(unsigned long addr)
+{
+ return ioport_panic();
+}
+
+static inline u32 inl(unsigned long addr)
+{
+ return ioport_panic();
+}
+
+static inline void outb(u8 b, unsigned long addr)
+{
+ ioport_panic();
+}
+
+static inline void outw(u16 b, unsigned long addr)
+{
+ ioport_panic();
+}
+
+static inline void outl(u32 b, unsigned long addr)
+{
+ ioport_panic();
+}
+
+#define inb_p(addr) inb(addr)
+#define inw_p(addr) inw(addr)
+#define inl_p(addr) inl(addr)
+#define outb_p(x, addr) outb((x), (addr))
+#define outw_p(x, addr) outw((x), (addr))
+#define outl_p(x, addr) outl((x), (addr))
+
+static inline void insb(unsigned long addr, void *buffer, int count)
+{
+ ioport_panic();
+}
+
+static inline void insw(unsigned long addr, void *buffer, int count)
+{
+ ioport_panic();
+}
+
+static inline void insl(unsigned long addr, void *buffer, int count)
+{
+ ioport_panic();
+}
+
+static inline void outsb(unsigned long addr, const void *buffer, int count)
+{
+ ioport_panic();
+}
+
+static inline void outsw(unsigned long addr, const void *buffer, int count)
+{
+ ioport_panic();
+}
+
+static inline void outsl(unsigned long addr, const void *buffer, int count)
+{
+ ioport_panic();
+}
+
+#define ioread8_rep(p, dst, count) \
+ insb((unsigned long) (p), (dst), (count))
+#define ioread16_rep(p, dst, count) \
+ insw((unsigned long) (p), (dst), (count))
+#define ioread32_rep(p, dst, count) \
+ insl((unsigned long) (p), (dst), (count))
+
+#define iowrite8_rep(p, src, count) \
+ outsb((unsigned long) (p), (src), (count))
+#define iowrite16_rep(p, src, count) \
+ outsw((unsigned long) (p), (src), (count))
+#define iowrite32_rep(p, src, count) \
+ outsl((unsigned long) (p), (src), (count))
+
+#endif /* _ASM_TILE_IO_H */
diff --git a/arch/tile/include/asm/ioctl.h b/arch/tile/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/tile/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/tile/include/asm/ioctls.h b/arch/tile/include/asm/ioctls.h
new file mode 100644
index 000000000000..ec34c760665e
--- /dev/null
+++ b/arch/tile/include/asm/ioctls.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctls.h>
diff --git a/arch/tile/include/asm/ipc.h b/arch/tile/include/asm/ipc.h
new file mode 100644
index 000000000000..a46e3d9c2a3f
--- /dev/null
+++ b/arch/tile/include/asm/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/arch/tile/include/asm/ipcbuf.h b/arch/tile/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..84c7e51cb6d0
--- /dev/null
+++ b/arch/tile/include/asm/ipcbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/ipcbuf.h>
diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h
new file mode 100644
index 000000000000..9be1f849fac9
--- /dev/null
+++ b/arch/tile/include/asm/irq.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_IRQ_H
+#define _ASM_TILE_IRQ_H
+
+#include <linux/hardirq.h>
+
+/* The hypervisor interface provides 32 IRQs. */
+#define NR_IRQS 32
+
+/* IRQ numbers used for linux IPIs. */
+#define IRQ_RESCHEDULE 1
+
+/* The HV interrupt state object. */
+DECLARE_PER_CPU(HV_IntrState, dev_intr_state);
+
+void ack_bad_irq(unsigned int irq);
+
+/*
+ * Paravirtualized drivers should call this when their init calls
+ * discover a valid HV IRQ.
+ */
+void tile_irq_activate(unsigned int irq);
+
+#endif /* _ASM_TILE_IRQ_H */
diff --git a/arch/tile/include/asm/irq_regs.h b/arch/tile/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/tile/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/tile/include/asm/irqflags.h b/arch/tile/include/asm/irqflags.h
new file mode 100644
index 000000000000..cf5bffd00fef
--- /dev/null
+++ b/arch/tile/include/asm/irqflags.h
@@ -0,0 +1,267 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_IRQFLAGS_H
+#define _ASM_TILE_IRQFLAGS_H
+
+#include <asm/processor.h>
+#include <arch/interrupts.h>
+#include <arch/chip.h>
+
+/*
+ * The set of interrupts we want to allow when interrupts are nominally
+ * disabled. The remainder are effectively "NMI" interrupts from
+ * the point of view of the generic Linux code. Note that synchronous
+ * interrupts (aka "non-queued") are not blocked by the mask in any case.
+ */
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+#define LINUX_MASKABLE_INTERRUPTS \
+ (~(INT_MASK(INT_PERF_COUNT) | INT_MASK(INT_AUX_PERF_COUNT)))
+#else
+#define LINUX_MASKABLE_INTERRUPTS \
+ (~(INT_MASK(INT_PERF_COUNT)))
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* NOTE: we can't include <linux/percpu.h> due to #include dependencies. */
+#include <asm/percpu.h>
+#include <arch/spr_def.h>
+
+/* Set and clear kernel interrupt masks. */
+#if CHIP_HAS_SPLIT_INTR_MASK()
+#if INT_PERF_COUNT < 32 || INT_AUX_PERF_COUNT < 32 || INT_MEM_ERROR >= 32
+# error Fix assumptions about which word various interrupts are in
+#endif
+#define interrupt_mask_set(n) do { \
+ int __n = (n); \
+ int __mask = 1 << (__n & 0x1f); \
+ if (__n < 32) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, __mask); \
+ else \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, __mask); \
+} while (0)
+#define interrupt_mask_reset(n) do { \
+ int __n = (n); \
+ int __mask = 1 << (__n & 0x1f); \
+ if (__n < 32) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, __mask); \
+ else \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, __mask); \
+} while (0)
+#define interrupt_mask_check(n) ({ \
+ int __n = (n); \
+ (((__n < 32) ? \
+ __insn_mfspr(SPR_INTERRUPT_MASK_1_0) : \
+ __insn_mfspr(SPR_INTERRUPT_MASK_1_1)) \
+ >> (__n & 0x1f)) & 1; \
+})
+#define interrupt_mask_set_mask(mask) do { \
+ unsigned long long __m = (mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1_1, (unsigned long)(__m>>32)); \
+} while (0)
+#define interrupt_mask_reset_mask(mask) do { \
+ unsigned long long __m = (mask); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_0, (unsigned long)(__m)); \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1_1, (unsigned long)(__m>>32)); \
+} while (0)
+#else
+#define interrupt_mask_set(n) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (1UL << (n)))
+#define interrupt_mask_reset(n) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (1UL << (n)))
+#define interrupt_mask_check(n) \
+ ((__insn_mfspr(SPR_INTERRUPT_MASK_1) >> (n)) & 1)
+#define interrupt_mask_set_mask(mask) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_SET_1, (mask))
+#define interrupt_mask_reset_mask(mask) \
+ __insn_mtspr(SPR_INTERRUPT_MASK_RESET_1, (mask))
+#endif
+
+/*
+ * The set of interrupts we want active if irqs are enabled.
+ * Note that in particular, the tile timer interrupt comes and goes
+ * from this set, since we have no other way to turn off the timer.
+ * Likewise, INTCTRL_1 is removed and re-added during device
+ * interrupts, as is the the hardwall UDN_FIREWALL interrupt.
+ * We use a low bit (MEM_ERROR) as our sentinel value and make sure it
+ * is always claimed as an "active interrupt" so we can query that bit
+ * to know our current state.
+ */
+DECLARE_PER_CPU(unsigned long long, interrupts_enabled_mask);
+#define INITIAL_INTERRUPTS_ENABLED INT_MASK(INT_MEM_ERROR)
+
+/* Disable interrupts. */
+#define raw_local_irq_disable() \
+ interrupt_mask_set_mask(LINUX_MASKABLE_INTERRUPTS)
+
+/* Disable all interrupts, including NMIs. */
+#define raw_local_irq_disable_all() \
+ interrupt_mask_set_mask(-1UL)
+
+/* Re-enable all maskable interrupts. */
+#define raw_local_irq_enable() \
+ interrupt_mask_reset_mask(__get_cpu_var(interrupts_enabled_mask))
+
+/* Disable or enable interrupts based on flag argument. */
+#define raw_local_irq_restore(disabled) do { \
+ if (disabled) \
+ raw_local_irq_disable(); \
+ else \
+ raw_local_irq_enable(); \
+} while (0)
+
+/* Return true if "flags" argument means interrupts are disabled. */
+#define raw_irqs_disabled_flags(flags) ((flags) != 0)
+
+/* Return true if interrupts are currently disabled. */
+#define raw_irqs_disabled() interrupt_mask_check(INT_MEM_ERROR)
+
+/* Save whether interrupts are currently disabled. */
+#define raw_local_save_flags(flags) ((flags) = raw_irqs_disabled())
+
+/* Save whether interrupts are currently disabled, then disable them. */
+#define raw_local_irq_save(flags) \
+ do { raw_local_save_flags(flags); raw_local_irq_disable(); } while (0)
+
+/* Prevent the given interrupt from being enabled next time we enable irqs. */
+#define raw_local_irq_mask(interrupt) \
+ (__get_cpu_var(interrupts_enabled_mask) &= ~INT_MASK(interrupt))
+
+/* Prevent the given interrupt from being enabled immediately. */
+#define raw_local_irq_mask_now(interrupt) do { \
+ raw_local_irq_mask(interrupt); \
+ interrupt_mask_set(interrupt); \
+} while (0)
+
+/* Allow the given interrupt to be enabled next time we enable irqs. */
+#define raw_local_irq_unmask(interrupt) \
+ (__get_cpu_var(interrupts_enabled_mask) |= INT_MASK(interrupt))
+
+/* Allow the given interrupt to be enabled immediately, if !irqs_disabled. */
+#define raw_local_irq_unmask_now(interrupt) do { \
+ raw_local_irq_unmask(interrupt); \
+ if (!irqs_disabled()) \
+ interrupt_mask_reset(interrupt); \
+} while (0)
+
+#else /* __ASSEMBLY__ */
+
+/* We provide a somewhat more restricted set for assembly. */
+
+#ifdef __tilegx__
+
+#if INT_MEM_ERROR != 0
+# error Fix IRQ_DISABLED() macro
+#endif
+
+/* Return 0 or 1 to indicate whether interrupts are currently disabled. */
+#define IRQS_DISABLED(tmp) \
+ mfspr tmp, INTERRUPT_MASK_1; \
+ andi tmp, tmp, 1
+
+/* Load up a pointer to &interrupts_enabled_mask. */
+#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
+ moveli reg, hw2_last(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw1(interrupts_enabled_mask); \
+ shl16insli reg, reg, hw0(interrupts_enabled_mask); \
+ add reg, reg, tp
+
+/* Disable interrupts. */
+#define IRQ_DISABLE(tmp0, tmp1) \
+ moveli tmp0, hw2_last(LINUX_MASKABLE_INTERRUPTS); \
+ shl16insli tmp0, tmp0, hw1(LINUX_MASKABLE_INTERRUPTS); \
+ shl16insli tmp0, tmp0, hw0(LINUX_MASKABLE_INTERRUPTS); \
+ mtspr INTERRUPT_MASK_SET_1, tmp0
+
+/* Disable ALL synchronous interrupts (used by NMI entry). */
+#define IRQ_DISABLE_ALL(tmp) \
+ movei tmp, -1; \
+ mtspr INTERRUPT_MASK_SET_1, tmp
+
+/* Enable interrupts. */
+#define IRQ_ENABLE(tmp0, tmp1) \
+ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
+ ld tmp0, tmp0; \
+ mtspr INTERRUPT_MASK_RESET_1, tmp0
+
+#else /* !__tilegx__ */
+
+/*
+ * Return 0 or 1 to indicate whether interrupts are currently disabled.
+ * Note that it's important that we use a bit from the "low" mask word,
+ * since when we are enabling, that is the word we write first, so if we
+ * are interrupted after only writing half of the mask, the interrupt
+ * handler will correctly observe that we have interrupts enabled, and
+ * will enable interrupts itself on return from the interrupt handler
+ * (making the original code's write of the "high" mask word idempotent).
+ */
+#define IRQS_DISABLED(tmp) \
+ mfspr tmp, INTERRUPT_MASK_1_0; \
+ shri tmp, tmp, INT_MEM_ERROR; \
+ andi tmp, tmp, 1
+
+/* Load up a pointer to &interrupts_enabled_mask. */
+#define GET_INTERRUPTS_ENABLED_MASK_PTR(reg) \
+ moveli reg, lo16(interrupts_enabled_mask); \
+ auli reg, reg, ha16(interrupts_enabled_mask);\
+ add reg, reg, tp
+
+/* Disable interrupts. */
+#define IRQ_DISABLE(tmp0, tmp1) \
+ { \
+ movei tmp0, -1; \
+ moveli tmp1, lo16(LINUX_MASKABLE_INTERRUPTS) \
+ }; \
+ { \
+ mtspr INTERRUPT_MASK_SET_1_0, tmp0; \
+ auli tmp1, tmp1, ha16(LINUX_MASKABLE_INTERRUPTS) \
+ }; \
+ mtspr INTERRUPT_MASK_SET_1_1, tmp1
+
+/* Disable ALL synchronous interrupts (used by NMI entry). */
+#define IRQ_DISABLE_ALL(tmp) \
+ movei tmp, -1; \
+ mtspr INTERRUPT_MASK_SET_1_0, tmp; \
+ mtspr INTERRUPT_MASK_SET_1_1, tmp
+
+/* Enable interrupts. */
+#define IRQ_ENABLE(tmp0, tmp1) \
+ GET_INTERRUPTS_ENABLED_MASK_PTR(tmp0); \
+ { \
+ lw tmp0, tmp0; \
+ addi tmp1, tmp0, 4 \
+ }; \
+ lw tmp1, tmp1; \
+ mtspr INTERRUPT_MASK_RESET_1_0, tmp0; \
+ mtspr INTERRUPT_MASK_RESET_1_1, tmp1
+#endif
+
+/*
+ * Do the CPU's IRQ-state tracing from assembly code. We call a
+ * C function, but almost everywhere we do, we don't mind clobbering
+ * all the caller-saved registers.
+ */
+#ifdef CONFIG_TRACE_IRQFLAGS
+# define TRACE_IRQS_ON jal trace_hardirqs_on
+# define TRACE_IRQS_OFF jal trace_hardirqs_off
+#else
+# define TRACE_IRQS_ON
+# define TRACE_IRQS_OFF
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_TILE_IRQFLAGS_H */
diff --git a/arch/tile/include/asm/kdebug.h b/arch/tile/include/asm/kdebug.h
new file mode 100644
index 000000000000..6ece1b037665
--- /dev/null
+++ b/arch/tile/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/tile/include/asm/kexec.h b/arch/tile/include/asm/kexec.h
new file mode 100644
index 000000000000..c11a6cc73bb8
--- /dev/null
+++ b/arch/tile/include/asm/kexec.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * based on kexec.h from other architectures in linux-2.6.18
+ */
+
+#ifndef _ASM_TILE_KEXEC_H
+#define _ASM_TILE_KEXEC_H
+
+#include <asm/page.h>
+
+/* Maximum physical address we can use pages from. */
+#define KEXEC_SOURCE_MEMORY_LIMIT TASK_SIZE
+/* Maximum address we can reach in physical address mode. */
+#define KEXEC_DESTINATION_MEMORY_LIMIT TASK_SIZE
+/* Maximum address we can use for the control code buffer. */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_PAGE_SIZE PAGE_SIZE
+
+/*
+ * We don't bother to provide a unique identifier, since we can only
+ * reboot with a single type of kernel image anyway.
+ */
+#define KEXEC_ARCH KEXEC_ARCH_DEFAULT
+
+/* Use the tile override for the page allocator. */
+struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order);
+#define kimage_alloc_pages_arch kimage_alloc_pages_arch
+
+#define MAX_NOTE_BYTES 1024
+
+/* Defined in arch/tile/kernel/relocate_kernel.S */
+extern const unsigned char relocate_new_kernel[];
+extern const unsigned long relocate_new_kernel_size;
+extern void relocate_new_kernel_end(void);
+
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *n, struct pt_regs *o)
+{
+}
+
+#endif /* _ASM_TILE_KEXEC_H */
diff --git a/arch/tile/include/asm/kmap_types.h b/arch/tile/include/asm/kmap_types.h
new file mode 100644
index 000000000000..1480106d1c05
--- /dev/null
+++ b/arch/tile/include/asm/kmap_types.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_KMAP_TYPES_H
+#define _ASM_TILE_KMAP_TYPES_H
+
+/*
+ * In TILE Linux each set of four of these uses another 16MB chunk of
+ * address space, given 64 tiles and 64KB pages, so we only enable
+ * ones that are required by the kernel configuration.
+ */
+enum km_type {
+ KM_BOUNCE_READ,
+ KM_SKB_SUNRPC_DATA,
+ KM_SKB_DATA_SOFTIRQ,
+ KM_USER0,
+ KM_USER1,
+ KM_BIO_SRC_IRQ,
+ KM_IRQ0,
+ KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
+ KM_MEMCPY0,
+ KM_MEMCPY1,
+#if defined(CONFIG_HIGHPTE)
+ KM_PTE0,
+ KM_PTE1,
+#endif
+ KM_TYPE_NR
+};
+
+#endif /* _ASM_TILE_KMAP_TYPES_H */
diff --git a/arch/tile/include/asm/linkage.h b/arch/tile/include/asm/linkage.h
new file mode 100644
index 000000000000..e121c39751a7
--- /dev/null
+++ b/arch/tile/include/asm/linkage.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_LINKAGE_H
+#define _ASM_TILE_LINKAGE_H
+
+#include <feedback.h>
+
+#define __ALIGN .align 8
+
+/*
+ * The STD_ENTRY and STD_ENDPROC macros put the function in a
+ * self-named .text.foo section, and if linker feedback collection
+ * is enabled, add a suitable call to the feedback collection code.
+ * STD_ENTRY_SECTION lets you specify a non-standard section name.
+ */
+
+#define STD_ENTRY(name) \
+ .pushsection .text.##name, "ax"; \
+ ENTRY(name); \
+ FEEDBACK_ENTER(name)
+
+#define STD_ENTRY_SECTION(name, section) \
+ .pushsection section, "ax"; \
+ ENTRY(name); \
+ FEEDBACK_ENTER_EXPLICIT(name, section, .Lend_##name - name)
+
+#define STD_ENDPROC(name) \
+ ENDPROC(name); \
+ .Lend_##name:; \
+ .popsection
+
+/* Create a file-static function entry set up for feedback gathering. */
+#define STD_ENTRY_LOCAL(name) \
+ .pushsection .text.##name, "ax"; \
+ ALIGN; \
+ name:; \
+ FEEDBACK_ENTER(name)
+
+#endif /* _ASM_TILE_LINKAGE_H */
diff --git a/arch/tile/include/asm/local.h b/arch/tile/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/tile/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/tile/include/asm/memprof.h b/arch/tile/include/asm/memprof.h
new file mode 100644
index 000000000000..359949be28c1
--- /dev/null
+++ b/arch/tile/include/asm/memprof.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * The hypervisor's memory controller profiling infrastructure allows
+ * the programmer to find out what fraction of the available memory
+ * bandwidth is being consumed at each memory controller. The
+ * profiler provides start, stop, and clear operations to allows
+ * profiling over a specific time window, as well as an interface for
+ * reading the most recent profile values.
+ *
+ * This header declares IOCTL codes necessary to control memprof.
+ */
+#ifndef _ASM_TILE_MEMPROF_H
+#define _ASM_TILE_MEMPROF_H
+
+#include <linux/ioctl.h>
+
+#define MEMPROF_IOCTL_TYPE 0xB4
+#define MEMPROF_IOCTL_START _IO(MEMPROF_IOCTL_TYPE, 0)
+#define MEMPROF_IOCTL_STOP _IO(MEMPROF_IOCTL_TYPE, 1)
+#define MEMPROF_IOCTL_CLEAR _IO(MEMPROF_IOCTL_TYPE, 2)
+
+#endif /* _ASM_TILE_MEMPROF_H */
diff --git a/arch/tile/include/asm/mman.h b/arch/tile/include/asm/mman.h
new file mode 100644
index 000000000000..4c6811e3e8dc
--- /dev/null
+++ b/arch/tile/include/asm/mman.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_MMAN_H
+#define _ASM_TILE_MMAN_H
+
+#include <asm-generic/mman-common.h>
+#include <arch/chip.h>
+
+/* Standard Linux flags */
+
+#define MAP_POPULATE 0x0040 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x0080 /* do not block on IO */
+#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
+#define MAP_LOCKED 0x0200 /* pages are locked */
+#define MAP_NORESERVE 0x0400 /* don't check for reservations */
+#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
+#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
+#define MAP_HUGETLB 0x4000 /* create a huge page mapping */
+
+
+/*
+ * Flags for mlockall
+ */
+#define MCL_CURRENT 1 /* lock all current mappings */
+#define MCL_FUTURE 2 /* lock all future mappings */
+
+
+#endif /* _ASM_TILE_MMAN_H */
diff --git a/arch/tile/include/asm/mmu.h b/arch/tile/include/asm/mmu.h
new file mode 100644
index 000000000000..92f94c77b6e4
--- /dev/null
+++ b/arch/tile/include/asm/mmu.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_MMU_H
+#define _ASM_TILE_MMU_H
+
+/* Capture any arch- and mm-specific information. */
+struct mm_context {
+ /*
+ * Written under the mmap_sem semaphore; read without the
+ * semaphore but atomically, but it is conservatively set.
+ */
+ unsigned int priority_cached;
+};
+
+typedef struct mm_context mm_context_t;
+
+void leave_mm(int cpu);
+
+#endif /* _ASM_TILE_MMU_H */
diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h
new file mode 100644
index 000000000000..9bc0d0725c28
--- /dev/null
+++ b/arch/tile/include/asm/mmu_context.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_MMU_CONTEXT_H
+#define _ASM_TILE_MMU_CONTEXT_H
+
+#include <linux/smp.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ return 0;
+}
+
+/* Note that arch/tile/kernel/head.S also calls hv_install_context() */
+static inline void __install_page_table(pgd_t *pgdir, int asid, pgprot_t prot)
+{
+ /* FIXME: DIRECTIO should not always be set. FIXME. */
+ int rc = hv_install_context(__pa(pgdir), prot, asid, HV_CTX_DIRECTIO);
+ if (rc < 0)
+ panic("hv_install_context failed: %d", rc);
+}
+
+static inline void install_page_table(pgd_t *pgdir, int asid)
+{
+ pte_t *ptep = virt_to_pte(NULL, (unsigned long)pgdir);
+ __install_page_table(pgdir, asid, *ptep);
+}
+
+/*
+ * "Lazy" TLB mode is entered when we are switching to a kernel task,
+ * which borrows the mm of the previous task. The goal of this
+ * optimization is to avoid having to install a new page table. On
+ * early x86 machines (where the concept originated) you couldn't do
+ * anything short of a full page table install for invalidation, so
+ * handling a remote TLB invalidate required doing a page table
+ * re-install. Someone clearly decided that it was silly to keep
+ * doing this while in "lazy" TLB mode, so the optimization involves
+ * installing the swapper page table instead the first time one
+ * occurs, and clearing the cpu out of cpu_vm_mask, so the cpu running
+ * the kernel task doesn't need to take any more interrupts. At that
+ * point it's then necessary to explicitly reinstall it when context
+ * switching back to the original mm.
+ *
+ * On Tile, we have to do a page-table install whenever DMA is enabled,
+ * so in that case lazy mode doesn't help anyway. And more generally,
+ * we have efficient per-page TLB shootdown, and don't expect to spend
+ * that much time in kernel tasks in general, so just leaving the
+ * kernel task borrowing the old page table, but handling TLB
+ * shootdowns, is a reasonable thing to do. And importantly, this
+ * lets us use the hypervisor's internal APIs for TLB shootdown, which
+ * means we don't have to worry about having TLB shootdowns blocked
+ * when Linux is disabling interrupts; see the page migration code for
+ * an example of where it's important for TLB shootdowns to complete
+ * even when interrupts are disabled at the Linux level.
+ */
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *t)
+{
+#if CHIP_HAS_TILE_DMA()
+ /*
+ * We have to do an "identity" page table switch in order to
+ * clear any pending DMA interrupts.
+ */
+ if (current->thread.tile_dma_state.enabled)
+ install_page_table(mm->pgd, __get_cpu_var(current_asid));
+#endif
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ if (likely(prev != next)) {
+
+ int cpu = smp_processor_id();
+
+ /* Pick new ASID. */
+ int asid = __get_cpu_var(current_asid) + 1;
+ if (asid > max_asid) {
+ asid = min_asid;
+ local_flush_tlb();
+ }
+ __get_cpu_var(current_asid) = asid;
+
+ /* Clear cpu from the old mm, and set it in the new one. */
+ cpumask_clear_cpu(cpu, &prev->cpu_vm_mask);
+ cpumask_set_cpu(cpu, &next->cpu_vm_mask);
+
+ /* Re-load page tables */
+ install_page_table(next->pgd, asid);
+
+ /* See how we should set the red/black cache info */
+ check_mm_caching(prev, next);
+
+ /*
+ * Since we're changing to a new mm, we have to flush
+ * the icache in case some physical page now being mapped
+ * has subsequently been repurposed and has new code.
+ */
+ __flush_icache();
+
+ }
+}
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+ struct mm_struct *next_mm)
+{
+ switch_mm(prev_mm, next_mm, NULL);
+}
+
+#define destroy_context(mm) do { } while (0)
+#define deactivate_mm(tsk, mm) do { } while (0)
+
+#endif /* _ASM_TILE_MMU_CONTEXT_H */
diff --git a/arch/tile/include/asm/mmzone.h b/arch/tile/include/asm/mmzone.h
new file mode 100644
index 000000000000..c6344c4f32ac
--- /dev/null
+++ b/arch/tile/include/asm/mmzone.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_MMZONE_H
+#define _ASM_TILE_MMZONE_H
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid) (&node_data[nid])
+
+extern void get_memcfg_numa(void);
+
+#ifdef CONFIG_DISCONTIGMEM
+
+#include <asm/page.h>
+
+/*
+ * Generally, memory ranges are always doled out by the hypervisor in
+ * fixed-size, power-of-two increments. That would make computing the node
+ * very easy. We could just take a couple high bits of the PA, which
+ * denote the memory shim, and we'd be done. However, when we're doing
+ * memory striping, this may not be true; PAs with different high bit
+ * values might be in the same node. Thus, we keep a lookup table to
+ * translate the high bits of the PFN to the node number.
+ */
+extern int highbits_to_node[];
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+ return highbits_to_node[__pfn_to_highbits(pfn)];
+}
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid) \
+({ \
+ pg_data_t *__pgdat = NODE_DATA(nid); \
+ __pgdat->node_start_pfn + __pgdat->node_spanned_pages; \
+})
+
+#define kern_addr_valid(kaddr) virt_addr_valid((void *)kaddr)
+
+static inline int pfn_valid(int pfn)
+{
+ int nid = pfn_to_nid(pfn);
+
+ if (nid >= 0)
+ return (pfn < node_end_pfn(nid));
+ return 0;
+}
+
+/* Information on the NUMA nodes that we compute early */
+extern unsigned long node_start_pfn[];
+extern unsigned long node_end_pfn[];
+extern unsigned long node_memmap_pfn[];
+extern unsigned long node_percpu_pfn[];
+extern unsigned long node_free_pfn[];
+#ifdef CONFIG_HIGHMEM
+extern unsigned long node_lowmem_end_pfn[];
+#endif
+#ifdef CONFIG_PCI
+extern unsigned long pci_reserve_start_pfn;
+extern unsigned long pci_reserve_end_pfn;
+#endif
+
+#endif /* CONFIG_DISCONTIGMEM */
+
+#endif /* _ASM_TILE_MMZONE_H */
diff --git a/arch/tile/include/asm/module.h b/arch/tile/include/asm/module.h
new file mode 100644
index 000000000000..1e4b79fe8584
--- /dev/null
+++ b/arch/tile/include/asm/module.h
@@ -0,0 +1 @@
+#include <asm-generic/module.h>
diff --git a/arch/tile/include/asm/msgbuf.h b/arch/tile/include/asm/msgbuf.h
new file mode 100644
index 000000000000..809134c644a6
--- /dev/null
+++ b/arch/tile/include/asm/msgbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/msgbuf.h>
diff --git a/arch/tile/include/asm/mutex.h b/arch/tile/include/asm/mutex.h
new file mode 100644
index 000000000000..ff6101aa2c71
--- /dev/null
+++ b/arch/tile/include/asm/mutex.h
@@ -0,0 +1 @@
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/tile/include/asm/opcode-tile.h b/arch/tile/include/asm/opcode-tile.h
new file mode 100644
index 000000000000..ba38959137d7
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_OPCODE_TILE_H
+#define _ASM_TILE_OPCODE_TILE_H
+
+#include <arch/chip.h>
+
+#if CHIP_WORD_SIZE() == 64
+#include <asm/opcode-tile_64.h>
+#else
+#include <asm/opcode-tile_32.h>
+#endif
+
+/* These definitions are not correct for TILE64, so just avoid them. */
+#undef TILE_ELF_MACHINE_CODE
+#undef TILE_ELF_NAME
+
+#endif /* _ASM_TILE_OPCODE_TILE_H */
diff --git a/arch/tile/include/asm/opcode-tile_32.h b/arch/tile/include/asm/opcode-tile_32.h
new file mode 100644
index 000000000000..90f8dd372531
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile_32.h
@@ -0,0 +1,1597 @@
+/* tile.h -- Header file for TILE opcode table
+ Copyright (C) 2005 Free Software Foundation, Inc.
+ Contributed by Tilera Corp. */
+
+#ifndef opcode_tile_h
+#define opcode_tile_h
+
+typedef unsigned long long tile_bundle_bits;
+
+
+enum
+{
+ TILE_MAX_OPERANDS = 5 /* mm */
+};
+
+typedef enum
+{
+ TILE_OPC_BPT,
+ TILE_OPC_INFO,
+ TILE_OPC_INFOL,
+ TILE_OPC_J,
+ TILE_OPC_JAL,
+ TILE_OPC_MOVE,
+ TILE_OPC_MOVE_SN,
+ TILE_OPC_MOVEI,
+ TILE_OPC_MOVEI_SN,
+ TILE_OPC_MOVELI,
+ TILE_OPC_MOVELI_SN,
+ TILE_OPC_MOVELIS,
+ TILE_OPC_PREFETCH,
+ TILE_OPC_ADD,
+ TILE_OPC_ADD_SN,
+ TILE_OPC_ADDB,
+ TILE_OPC_ADDB_SN,
+ TILE_OPC_ADDBS_U,
+ TILE_OPC_ADDBS_U_SN,
+ TILE_OPC_ADDH,
+ TILE_OPC_ADDH_SN,
+ TILE_OPC_ADDHS,
+ TILE_OPC_ADDHS_SN,
+ TILE_OPC_ADDI,
+ TILE_OPC_ADDI_SN,
+ TILE_OPC_ADDIB,
+ TILE_OPC_ADDIB_SN,
+ TILE_OPC_ADDIH,
+ TILE_OPC_ADDIH_SN,
+ TILE_OPC_ADDLI,
+ TILE_OPC_ADDLI_SN,
+ TILE_OPC_ADDLIS,
+ TILE_OPC_ADDS,
+ TILE_OPC_ADDS_SN,
+ TILE_OPC_ADIFFB_U,
+ TILE_OPC_ADIFFB_U_SN,
+ TILE_OPC_ADIFFH,
+ TILE_OPC_ADIFFH_SN,
+ TILE_OPC_AND,
+ TILE_OPC_AND_SN,
+ TILE_OPC_ANDI,
+ TILE_OPC_ANDI_SN,
+ TILE_OPC_AULI,
+ TILE_OPC_AVGB_U,
+ TILE_OPC_AVGB_U_SN,
+ TILE_OPC_AVGH,
+ TILE_OPC_AVGH_SN,
+ TILE_OPC_BBNS,
+ TILE_OPC_BBNS_SN,
+ TILE_OPC_BBNST,
+ TILE_OPC_BBNST_SN,
+ TILE_OPC_BBS,
+ TILE_OPC_BBS_SN,
+ TILE_OPC_BBST,
+ TILE_OPC_BBST_SN,
+ TILE_OPC_BGEZ,
+ TILE_OPC_BGEZ_SN,
+ TILE_OPC_BGEZT,
+ TILE_OPC_BGEZT_SN,
+ TILE_OPC_BGZ,
+ TILE_OPC_BGZ_SN,
+ TILE_OPC_BGZT,
+ TILE_OPC_BGZT_SN,
+ TILE_OPC_BITX,
+ TILE_OPC_BITX_SN,
+ TILE_OPC_BLEZ,
+ TILE_OPC_BLEZ_SN,
+ TILE_OPC_BLEZT,
+ TILE_OPC_BLEZT_SN,
+ TILE_OPC_BLZ,
+ TILE_OPC_BLZ_SN,
+ TILE_OPC_BLZT,
+ TILE_OPC_BLZT_SN,
+ TILE_OPC_BNZ,
+ TILE_OPC_BNZ_SN,
+ TILE_OPC_BNZT,
+ TILE_OPC_BNZT_SN,
+ TILE_OPC_BYTEX,
+ TILE_OPC_BYTEX_SN,
+ TILE_OPC_BZ,
+ TILE_OPC_BZ_SN,
+ TILE_OPC_BZT,
+ TILE_OPC_BZT_SN,
+ TILE_OPC_CLZ,
+ TILE_OPC_CLZ_SN,
+ TILE_OPC_CRC32_32,
+ TILE_OPC_CRC32_32_SN,
+ TILE_OPC_CRC32_8,
+ TILE_OPC_CRC32_8_SN,
+ TILE_OPC_CTZ,
+ TILE_OPC_CTZ_SN,
+ TILE_OPC_DRAIN,
+ TILE_OPC_DTLBPR,
+ TILE_OPC_DWORD_ALIGN,
+ TILE_OPC_DWORD_ALIGN_SN,
+ TILE_OPC_FINV,
+ TILE_OPC_FLUSH,
+ TILE_OPC_FNOP,
+ TILE_OPC_ICOH,
+ TILE_OPC_ILL,
+ TILE_OPC_INTHB,
+ TILE_OPC_INTHB_SN,
+ TILE_OPC_INTHH,
+ TILE_OPC_INTHH_SN,
+ TILE_OPC_INTLB,
+ TILE_OPC_INTLB_SN,
+ TILE_OPC_INTLH,
+ TILE_OPC_INTLH_SN,
+ TILE_OPC_INV,
+ TILE_OPC_IRET,
+ TILE_OPC_JALB,
+ TILE_OPC_JALF,
+ TILE_OPC_JALR,
+ TILE_OPC_JALRP,
+ TILE_OPC_JB,
+ TILE_OPC_JF,
+ TILE_OPC_JR,
+ TILE_OPC_JRP,
+ TILE_OPC_LB,
+ TILE_OPC_LB_SN,
+ TILE_OPC_LB_U,
+ TILE_OPC_LB_U_SN,
+ TILE_OPC_LBADD,
+ TILE_OPC_LBADD_SN,
+ TILE_OPC_LBADD_U,
+ TILE_OPC_LBADD_U_SN,
+ TILE_OPC_LH,
+ TILE_OPC_LH_SN,
+ TILE_OPC_LH_U,
+ TILE_OPC_LH_U_SN,
+ TILE_OPC_LHADD,
+ TILE_OPC_LHADD_SN,
+ TILE_OPC_LHADD_U,
+ TILE_OPC_LHADD_U_SN,
+ TILE_OPC_LNK,
+ TILE_OPC_LNK_SN,
+ TILE_OPC_LW,
+ TILE_OPC_LW_SN,
+ TILE_OPC_LW_NA,
+ TILE_OPC_LW_NA_SN,
+ TILE_OPC_LWADD,
+ TILE_OPC_LWADD_SN,
+ TILE_OPC_LWADD_NA,
+ TILE_OPC_LWADD_NA_SN,
+ TILE_OPC_MAXB_U,
+ TILE_OPC_MAXB_U_SN,
+ TILE_OPC_MAXH,
+ TILE_OPC_MAXH_SN,
+ TILE_OPC_MAXIB_U,
+ TILE_OPC_MAXIB_U_SN,
+ TILE_OPC_MAXIH,
+ TILE_OPC_MAXIH_SN,
+ TILE_OPC_MF,
+ TILE_OPC_MFSPR,
+ TILE_OPC_MINB_U,
+ TILE_OPC_MINB_U_SN,
+ TILE_OPC_MINH,
+ TILE_OPC_MINH_SN,
+ TILE_OPC_MINIB_U,
+ TILE_OPC_MINIB_U_SN,
+ TILE_OPC_MINIH,
+ TILE_OPC_MINIH_SN,
+ TILE_OPC_MM,
+ TILE_OPC_MNZ,
+ TILE_OPC_MNZ_SN,
+ TILE_OPC_MNZB,
+ TILE_OPC_MNZB_SN,
+ TILE_OPC_MNZH,
+ TILE_OPC_MNZH_SN,
+ TILE_OPC_MTSPR,
+ TILE_OPC_MULHH_SS,
+ TILE_OPC_MULHH_SS_SN,
+ TILE_OPC_MULHH_SU,
+ TILE_OPC_MULHH_SU_SN,
+ TILE_OPC_MULHH_UU,
+ TILE_OPC_MULHH_UU_SN,
+ TILE_OPC_MULHHA_SS,
+ TILE_OPC_MULHHA_SS_SN,
+ TILE_OPC_MULHHA_SU,
+ TILE_OPC_MULHHA_SU_SN,
+ TILE_OPC_MULHHA_UU,
+ TILE_OPC_MULHHA_UU_SN,
+ TILE_OPC_MULHHSA_UU,
+ TILE_OPC_MULHHSA_UU_SN,
+ TILE_OPC_MULHL_SS,
+ TILE_OPC_MULHL_SS_SN,
+ TILE_OPC_MULHL_SU,
+ TILE_OPC_MULHL_SU_SN,
+ TILE_OPC_MULHL_US,
+ TILE_OPC_MULHL_US_SN,
+ TILE_OPC_MULHL_UU,
+ TILE_OPC_MULHL_UU_SN,
+ TILE_OPC_MULHLA_SS,
+ TILE_OPC_MULHLA_SS_SN,
+ TILE_OPC_MULHLA_SU,
+ TILE_OPC_MULHLA_SU_SN,
+ TILE_OPC_MULHLA_US,
+ TILE_OPC_MULHLA_US_SN,
+ TILE_OPC_MULHLA_UU,
+ TILE_OPC_MULHLA_UU_SN,
+ TILE_OPC_MULHLSA_UU,
+ TILE_OPC_MULHLSA_UU_SN,
+ TILE_OPC_MULLL_SS,
+ TILE_OPC_MULLL_SS_SN,
+ TILE_OPC_MULLL_SU,
+ TILE_OPC_MULLL_SU_SN,
+ TILE_OPC_MULLL_UU,
+ TILE_OPC_MULLL_UU_SN,
+ TILE_OPC_MULLLA_SS,
+ TILE_OPC_MULLLA_SS_SN,
+ TILE_OPC_MULLLA_SU,
+ TILE_OPC_MULLLA_SU_SN,
+ TILE_OPC_MULLLA_UU,
+ TILE_OPC_MULLLA_UU_SN,
+ TILE_OPC_MULLLSA_UU,
+ TILE_OPC_MULLLSA_UU_SN,
+ TILE_OPC_MVNZ,
+ TILE_OPC_MVNZ_SN,
+ TILE_OPC_MVZ,
+ TILE_OPC_MVZ_SN,
+ TILE_OPC_MZ,
+ TILE_OPC_MZ_SN,
+ TILE_OPC_MZB,
+ TILE_OPC_MZB_SN,
+ TILE_OPC_MZH,
+ TILE_OPC_MZH_SN,
+ TILE_OPC_NAP,
+ TILE_OPC_NOP,
+ TILE_OPC_NOR,
+ TILE_OPC_NOR_SN,
+ TILE_OPC_OR,
+ TILE_OPC_OR_SN,
+ TILE_OPC_ORI,
+ TILE_OPC_ORI_SN,
+ TILE_OPC_PACKBS_U,
+ TILE_OPC_PACKBS_U_SN,
+ TILE_OPC_PACKHB,
+ TILE_OPC_PACKHB_SN,
+ TILE_OPC_PACKHS,
+ TILE_OPC_PACKHS_SN,
+ TILE_OPC_PACKLB,
+ TILE_OPC_PACKLB_SN,
+ TILE_OPC_PCNT,
+ TILE_OPC_PCNT_SN,
+ TILE_OPC_RL,
+ TILE_OPC_RL_SN,
+ TILE_OPC_RLI,
+ TILE_OPC_RLI_SN,
+ TILE_OPC_S1A,
+ TILE_OPC_S1A_SN,
+ TILE_OPC_S2A,
+ TILE_OPC_S2A_SN,
+ TILE_OPC_S3A,
+ TILE_OPC_S3A_SN,
+ TILE_OPC_SADAB_U,
+ TILE_OPC_SADAB_U_SN,
+ TILE_OPC_SADAH,
+ TILE_OPC_SADAH_SN,
+ TILE_OPC_SADAH_U,
+ TILE_OPC_SADAH_U_SN,
+ TILE_OPC_SADB_U,
+ TILE_OPC_SADB_U_SN,
+ TILE_OPC_SADH,
+ TILE_OPC_SADH_SN,
+ TILE_OPC_SADH_U,
+ TILE_OPC_SADH_U_SN,
+ TILE_OPC_SB,
+ TILE_OPC_SBADD,
+ TILE_OPC_SEQ,
+ TILE_OPC_SEQ_SN,
+ TILE_OPC_SEQB,
+ TILE_OPC_SEQB_SN,
+ TILE_OPC_SEQH,
+ TILE_OPC_SEQH_SN,
+ TILE_OPC_SEQI,
+ TILE_OPC_SEQI_SN,
+ TILE_OPC_SEQIB,
+ TILE_OPC_SEQIB_SN,
+ TILE_OPC_SEQIH,
+ TILE_OPC_SEQIH_SN,
+ TILE_OPC_SH,
+ TILE_OPC_SHADD,
+ TILE_OPC_SHL,
+ TILE_OPC_SHL_SN,
+ TILE_OPC_SHLB,
+ TILE_OPC_SHLB_SN,
+ TILE_OPC_SHLH,
+ TILE_OPC_SHLH_SN,
+ TILE_OPC_SHLI,
+ TILE_OPC_SHLI_SN,
+ TILE_OPC_SHLIB,
+ TILE_OPC_SHLIB_SN,
+ TILE_OPC_SHLIH,
+ TILE_OPC_SHLIH_SN,
+ TILE_OPC_SHR,
+ TILE_OPC_SHR_SN,
+ TILE_OPC_SHRB,
+ TILE_OPC_SHRB_SN,
+ TILE_OPC_SHRH,
+ TILE_OPC_SHRH_SN,
+ TILE_OPC_SHRI,
+ TILE_OPC_SHRI_SN,
+ TILE_OPC_SHRIB,
+ TILE_OPC_SHRIB_SN,
+ TILE_OPC_SHRIH,
+ TILE_OPC_SHRIH_SN,
+ TILE_OPC_SLT,
+ TILE_OPC_SLT_SN,
+ TILE_OPC_SLT_U,
+ TILE_OPC_SLT_U_SN,
+ TILE_OPC_SLTB,
+ TILE_OPC_SLTB_SN,
+ TILE_OPC_SLTB_U,
+ TILE_OPC_SLTB_U_SN,
+ TILE_OPC_SLTE,
+ TILE_OPC_SLTE_SN,
+ TILE_OPC_SLTE_U,
+ TILE_OPC_SLTE_U_SN,
+ TILE_OPC_SLTEB,
+ TILE_OPC_SLTEB_SN,
+ TILE_OPC_SLTEB_U,
+ TILE_OPC_SLTEB_U_SN,
+ TILE_OPC_SLTEH,
+ TILE_OPC_SLTEH_SN,
+ TILE_OPC_SLTEH_U,
+ TILE_OPC_SLTEH_U_SN,
+ TILE_OPC_SLTH,
+ TILE_OPC_SLTH_SN,
+ TILE_OPC_SLTH_U,
+ TILE_OPC_SLTH_U_SN,
+ TILE_OPC_SLTI,
+ TILE_OPC_SLTI_SN,
+ TILE_OPC_SLTI_U,
+ TILE_OPC_SLTI_U_SN,
+ TILE_OPC_SLTIB,
+ TILE_OPC_SLTIB_SN,
+ TILE_OPC_SLTIB_U,
+ TILE_OPC_SLTIB_U_SN,
+ TILE_OPC_SLTIH,
+ TILE_OPC_SLTIH_SN,
+ TILE_OPC_SLTIH_U,
+ TILE_OPC_SLTIH_U_SN,
+ TILE_OPC_SNE,
+ TILE_OPC_SNE_SN,
+ TILE_OPC_SNEB,
+ TILE_OPC_SNEB_SN,
+ TILE_OPC_SNEH,
+ TILE_OPC_SNEH_SN,
+ TILE_OPC_SRA,
+ TILE_OPC_SRA_SN,
+ TILE_OPC_SRAB,
+ TILE_OPC_SRAB_SN,
+ TILE_OPC_SRAH,
+ TILE_OPC_SRAH_SN,
+ TILE_OPC_SRAI,
+ TILE_OPC_SRAI_SN,
+ TILE_OPC_SRAIB,
+ TILE_OPC_SRAIB_SN,
+ TILE_OPC_SRAIH,
+ TILE_OPC_SRAIH_SN,
+ TILE_OPC_SUB,
+ TILE_OPC_SUB_SN,
+ TILE_OPC_SUBB,
+ TILE_OPC_SUBB_SN,
+ TILE_OPC_SUBBS_U,
+ TILE_OPC_SUBBS_U_SN,
+ TILE_OPC_SUBH,
+ TILE_OPC_SUBH_SN,
+ TILE_OPC_SUBHS,
+ TILE_OPC_SUBHS_SN,
+ TILE_OPC_SUBS,
+ TILE_OPC_SUBS_SN,
+ TILE_OPC_SW,
+ TILE_OPC_SWADD,
+ TILE_OPC_SWINT0,
+ TILE_OPC_SWINT1,
+ TILE_OPC_SWINT2,
+ TILE_OPC_SWINT3,
+ TILE_OPC_TBLIDXB0,
+ TILE_OPC_TBLIDXB0_SN,
+ TILE_OPC_TBLIDXB1,
+ TILE_OPC_TBLIDXB1_SN,
+ TILE_OPC_TBLIDXB2,
+ TILE_OPC_TBLIDXB2_SN,
+ TILE_OPC_TBLIDXB3,
+ TILE_OPC_TBLIDXB3_SN,
+ TILE_OPC_TNS,
+ TILE_OPC_TNS_SN,
+ TILE_OPC_WH64,
+ TILE_OPC_XOR,
+ TILE_OPC_XOR_SN,
+ TILE_OPC_XORI,
+ TILE_OPC_XORI_SN,
+ TILE_OPC_NONE
+} tile_mnemonic;
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL
+
+
+#define TILE_ELF_MACHINE_CODE EM_TILEPRO
+
+#define TILE_ELF_NAME "elf32-tilepro"
+
+enum
+{
+ TILE_SN_MAX_OPERANDS = 6 /* route */
+};
+
+typedef enum
+{
+ TILE_SN_OPC_BZ,
+ TILE_SN_OPC_BNZ,
+ TILE_SN_OPC_JRR,
+ TILE_SN_OPC_FNOP,
+ TILE_SN_OPC_BLZ,
+ TILE_SN_OPC_NOP,
+ TILE_SN_OPC_MOVEI,
+ TILE_SN_OPC_MOVE,
+ TILE_SN_OPC_BGEZ,
+ TILE_SN_OPC_JR,
+ TILE_SN_OPC_BLEZ,
+ TILE_SN_OPC_BBNS,
+ TILE_SN_OPC_JALRR,
+ TILE_SN_OPC_BPT,
+ TILE_SN_OPC_JALR,
+ TILE_SN_OPC_SHR1,
+ TILE_SN_OPC_BGZ,
+ TILE_SN_OPC_BBS,
+ TILE_SN_OPC_SHL8II,
+ TILE_SN_OPC_ADDI,
+ TILE_SN_OPC_HALT,
+ TILE_SN_OPC_ROUTE,
+ TILE_SN_OPC_NONE
+} tile_sn_mnemonic;
+
+extern const unsigned char tile_sn_route_encode[6 * 6 * 6];
+extern const signed char tile_sn_route_decode[256][3];
+extern const char tile_sn_direction_names[6][5];
+extern const signed char tile_sn_dest_map[6][6];
+
+
+static __inline unsigned int
+get_BrOff_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000);
+}
+
+static __inline unsigned int
+get_BrType_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0xf);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x0000003f) |
+ (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 2)) & 0x3);
+}
+
+static __inline unsigned int
+get_Dest_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 20)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 51)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmRROpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 8)) & 0x3);
+}
+
+static __inline unsigned int
+get_JOffLong_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000) |
+ (((unsigned int)(n >> 14)) & 0x001e0000) |
+ (((unsigned int)(n >> 16)) & 0x07e00000) |
+ (((unsigned int)(n >> 31)) & 0x18000000);
+}
+
+static __inline unsigned int
+get_JOff_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000) |
+ (((unsigned int)(n >> 14)) & 0x001e0000) |
+ (((unsigned int)(n >> 16)) & 0x07e00000) |
+ (((unsigned int)(n >> 31)) & 0x08000000);
+}
+
+static __inline unsigned int
+get_MF_Imm15_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x00003fff) |
+ (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_MMEnd_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMEnd_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 23)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MT_Imm15_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x0000003f) |
+ (((unsigned int)(n >> 37)) & 0x00003fc0) |
+ (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_Mode(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 63)) & 0x1);
+}
+
+static __inline unsigned int
+get_NoRegOpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 10)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 56)) & 0x7);
+}
+
+static __inline unsigned int
+get_RROpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 4)) & 0xf);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_RouteOpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_S_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 27)) & 0x1);
+}
+
+static __inline unsigned int
+get_S_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tile_bundle_bits n)
+{
+ return (((n >> 26)) & 0x00000001) |
+ (((unsigned int)(n >> 50)) & 0x0000003e);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Src_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 17)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 48)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 17)) & 0x7);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 48)) & 0x7);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+ int shift = (int)(sizeof(int) * 8 - num_bits);
+ return (n << shift) >> shift;
+}
+
+
+
+static __inline tile_bundle_bits
+create_BrOff_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_BrOff_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20);
+}
+
+static __inline tile_bundle_bits
+create_BrType_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+ (((tile_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Dest_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 2);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xffff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7f)) << 51);
+}
+
+static __inline tile_bundle_bits
+create_ImmRROpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 8);
+}
+
+static __inline tile_bundle_bits
+create_JOffLong_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+ (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+ (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+ (((tile_bundle_bits)(n & 0x18000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_JOff_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+ (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+ (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+ (((tile_bundle_bits)(n & 0x08000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_MF_Imm15_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00003fff)) << 37) |
+ (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 18);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 23);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tile_bundle_bits
+create_MT_Imm15_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+ (((tile_bundle_bits)(n & 0x00003fc0)) << 37) |
+ (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_Mode(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1)) << 63);
+}
+
+static __inline tile_bundle_bits
+create_NoRegOpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 10);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7) << 28);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 27);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7)) << 56);
+}
+
+static __inline tile_bundle_bits
+create_RROpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 4);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1ff) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1ff)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RouteOpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_S_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1) << 27);
+}
+
+static __inline tile_bundle_bits
+create_S_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x00000001) << 26) |
+ (((tile_bundle_bits)(n & 0x0000003e)) << 50);
+}
+
+static __inline tile_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Src_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 0);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3ff)) << 48);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7)) << 48);
+}
+
+
+typedef unsigned short tile_sn_instruction_bits;
+
+
+typedef enum
+{
+ TILE_PIPELINE_X0,
+ TILE_PIPELINE_X1,
+ TILE_PIPELINE_Y0,
+ TILE_PIPELINE_Y1,
+ TILE_PIPELINE_Y2,
+} tile_pipeline;
+
+#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1)
+
+typedef enum
+{
+ TILE_OP_TYPE_REGISTER,
+ TILE_OP_TYPE_IMMEDIATE,
+ TILE_OP_TYPE_ADDRESS,
+ TILE_OP_TYPE_SPR
+} tile_operand_type;
+
+/* This is the bit that determines if a bundle is in the Y encoding. */
+#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63)
+
+enum
+{
+ /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+ TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+ /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+ TILE_NUM_PIPELINE_ENCODINGS = 5,
+
+ /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */
+ TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+ /* Instructions take this many bytes. */
+ TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+ /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+ /* Bundles should be aligned modulo this number of bytes. */
+ TILE_BUNDLE_ALIGNMENT_IN_BYTES =
+ (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+ /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */
+ TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
+
+ /* Static network instructions take this many bytes. */
+ TILE_SN_INSTRUCTION_SIZE_IN_BYTES =
+ (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
+
+ /* Number of registers (some are magic, such as network I/O). */
+ TILE_NUM_REGISTERS = 64,
+
+ /* Number of static network registers. */
+ TILE_NUM_SN_REGISTERS = 4
+};
+
+
+struct tile_operand
+{
+ /* Is this operand a register, immediate or address? */
+ tile_operand_type type;
+
+ /* The default relocation type for this operand. */
+ signed int default_reloc : 16;
+
+ /* How many bits is this value? (used for range checking) */
+ unsigned int num_bits : 5;
+
+ /* Is the value signed? (used for range checking) */
+ unsigned int is_signed : 1;
+
+ /* Is this operand a source register? */
+ unsigned int is_src_reg : 1;
+
+ /* Is this operand written? (i.e. is it a destination register) */
+ unsigned int is_dest_reg : 1;
+
+ /* Is this operand PC-relative? */
+ unsigned int is_pc_relative : 1;
+
+ /* By how many bits do we right shift the value before inserting? */
+ unsigned int rightshift : 2;
+
+ /* Return the bits for this operand to be ORed into an existing bundle. */
+ tile_bundle_bits (*insert) (int op);
+
+ /* Extract this operand and return it. */
+ unsigned int (*extract) (tile_bundle_bits bundle);
+};
+
+
+extern const struct tile_operand tile_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS];
+
+
+struct tile_opcode
+{
+ /* The opcode mnemonic, e.g. "add" */
+ const char *name;
+
+ /* The enum value for this mnemonic. */
+ tile_mnemonic mnemonic;
+
+ /* A bit mask of which of the five pipes this instruction
+ is compatible with:
+ X0 0x01
+ X1 0x02
+ Y0 0x04
+ Y1 0x08
+ Y2 0x10 */
+ unsigned char pipes;
+
+ /* How many operands are there? */
+ unsigned char num_operands;
+
+ /* Which register does this write implicitly, or TREG_ZERO if none? */
+ unsigned char implicitly_written_register;
+
+ /* Can this be bundled with other instructions (almost always true). */
+ unsigned char can_bundle;
+
+ /* The description of the operands. Each of these is an
+ * index into the tile_operands[] table. */
+ unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS];
+
+ /* A mask of which bits have predefined values for each pipeline.
+ * This is useful for disassembly. */
+ tile_bundle_bits fixed_bit_masks[TILE_NUM_PIPELINE_ENCODINGS];
+
+ /* For each bit set in fixed_bit_masks, what the value is for this
+ * instruction. */
+ tile_bundle_bits fixed_bit_values[TILE_NUM_PIPELINE_ENCODINGS];
+};
+
+extern const struct tile_opcode tile_opcodes[];
+
+struct tile_sn_opcode
+{
+ /* The opcode mnemonic, e.g. "add" */
+ const char *name;
+
+ /* The enum value for this mnemonic. */
+ tile_sn_mnemonic mnemonic;
+
+ /* How many operands are there? */
+ unsigned char num_operands;
+
+ /* The description of the operands. Each of these is an
+ * index into the tile_operands[] table. */
+ unsigned char operands[TILE_SN_MAX_OPERANDS];
+
+ /* A mask of which bits have predefined values.
+ * This is useful for disassembly. */
+ tile_sn_instruction_bits fixed_bit_mask;
+
+ /* For each bit set in fixed_bit_masks, what its value is. */
+ tile_sn_instruction_bits fixed_bit_values;
+};
+
+extern const struct tile_sn_opcode tile_sn_opcodes[];
+
+/* Used for non-textual disassembly into structs. */
+struct tile_decoded_instruction
+{
+ const struct tile_opcode *opcode;
+ const struct tile_operand *operands[TILE_MAX_OPERANDS];
+ int operand_values[TILE_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tile(tile_bundle_bits bits,
+ unsigned int pc,
+ struct tile_decoded_instruction
+ decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+/* Canonical names of all the registers. */
+/* ISSUE: This table lives in "tile-dis.c" */
+extern const char * const tile_register_names[];
+
+/* Descriptor for a special-purpose register. */
+struct tile_spr
+{
+ /* The number */
+ int number;
+
+ /* The name */
+ const char *name;
+};
+
+/* List of all the SPRs; ordered by increasing number. */
+extern const struct tile_spr tile_sprs[];
+
+/* Number of special-purpose registers. */
+extern const int tile_num_sprs;
+
+extern const char *
+get_tile_spr_name (int num);
+
+#endif /* opcode_tile_h */
diff --git a/arch/tile/include/asm/opcode-tile_64.h b/arch/tile/include/asm/opcode-tile_64.h
new file mode 100644
index 000000000000..90f8dd372531
--- /dev/null
+++ b/arch/tile/include/asm/opcode-tile_64.h
@@ -0,0 +1,1597 @@
+/* tile.h -- Header file for TILE opcode table
+ Copyright (C) 2005 Free Software Foundation, Inc.
+ Contributed by Tilera Corp. */
+
+#ifndef opcode_tile_h
+#define opcode_tile_h
+
+typedef unsigned long long tile_bundle_bits;
+
+
+enum
+{
+ TILE_MAX_OPERANDS = 5 /* mm */
+};
+
+typedef enum
+{
+ TILE_OPC_BPT,
+ TILE_OPC_INFO,
+ TILE_OPC_INFOL,
+ TILE_OPC_J,
+ TILE_OPC_JAL,
+ TILE_OPC_MOVE,
+ TILE_OPC_MOVE_SN,
+ TILE_OPC_MOVEI,
+ TILE_OPC_MOVEI_SN,
+ TILE_OPC_MOVELI,
+ TILE_OPC_MOVELI_SN,
+ TILE_OPC_MOVELIS,
+ TILE_OPC_PREFETCH,
+ TILE_OPC_ADD,
+ TILE_OPC_ADD_SN,
+ TILE_OPC_ADDB,
+ TILE_OPC_ADDB_SN,
+ TILE_OPC_ADDBS_U,
+ TILE_OPC_ADDBS_U_SN,
+ TILE_OPC_ADDH,
+ TILE_OPC_ADDH_SN,
+ TILE_OPC_ADDHS,
+ TILE_OPC_ADDHS_SN,
+ TILE_OPC_ADDI,
+ TILE_OPC_ADDI_SN,
+ TILE_OPC_ADDIB,
+ TILE_OPC_ADDIB_SN,
+ TILE_OPC_ADDIH,
+ TILE_OPC_ADDIH_SN,
+ TILE_OPC_ADDLI,
+ TILE_OPC_ADDLI_SN,
+ TILE_OPC_ADDLIS,
+ TILE_OPC_ADDS,
+ TILE_OPC_ADDS_SN,
+ TILE_OPC_ADIFFB_U,
+ TILE_OPC_ADIFFB_U_SN,
+ TILE_OPC_ADIFFH,
+ TILE_OPC_ADIFFH_SN,
+ TILE_OPC_AND,
+ TILE_OPC_AND_SN,
+ TILE_OPC_ANDI,
+ TILE_OPC_ANDI_SN,
+ TILE_OPC_AULI,
+ TILE_OPC_AVGB_U,
+ TILE_OPC_AVGB_U_SN,
+ TILE_OPC_AVGH,
+ TILE_OPC_AVGH_SN,
+ TILE_OPC_BBNS,
+ TILE_OPC_BBNS_SN,
+ TILE_OPC_BBNST,
+ TILE_OPC_BBNST_SN,
+ TILE_OPC_BBS,
+ TILE_OPC_BBS_SN,
+ TILE_OPC_BBST,
+ TILE_OPC_BBST_SN,
+ TILE_OPC_BGEZ,
+ TILE_OPC_BGEZ_SN,
+ TILE_OPC_BGEZT,
+ TILE_OPC_BGEZT_SN,
+ TILE_OPC_BGZ,
+ TILE_OPC_BGZ_SN,
+ TILE_OPC_BGZT,
+ TILE_OPC_BGZT_SN,
+ TILE_OPC_BITX,
+ TILE_OPC_BITX_SN,
+ TILE_OPC_BLEZ,
+ TILE_OPC_BLEZ_SN,
+ TILE_OPC_BLEZT,
+ TILE_OPC_BLEZT_SN,
+ TILE_OPC_BLZ,
+ TILE_OPC_BLZ_SN,
+ TILE_OPC_BLZT,
+ TILE_OPC_BLZT_SN,
+ TILE_OPC_BNZ,
+ TILE_OPC_BNZ_SN,
+ TILE_OPC_BNZT,
+ TILE_OPC_BNZT_SN,
+ TILE_OPC_BYTEX,
+ TILE_OPC_BYTEX_SN,
+ TILE_OPC_BZ,
+ TILE_OPC_BZ_SN,
+ TILE_OPC_BZT,
+ TILE_OPC_BZT_SN,
+ TILE_OPC_CLZ,
+ TILE_OPC_CLZ_SN,
+ TILE_OPC_CRC32_32,
+ TILE_OPC_CRC32_32_SN,
+ TILE_OPC_CRC32_8,
+ TILE_OPC_CRC32_8_SN,
+ TILE_OPC_CTZ,
+ TILE_OPC_CTZ_SN,
+ TILE_OPC_DRAIN,
+ TILE_OPC_DTLBPR,
+ TILE_OPC_DWORD_ALIGN,
+ TILE_OPC_DWORD_ALIGN_SN,
+ TILE_OPC_FINV,
+ TILE_OPC_FLUSH,
+ TILE_OPC_FNOP,
+ TILE_OPC_ICOH,
+ TILE_OPC_ILL,
+ TILE_OPC_INTHB,
+ TILE_OPC_INTHB_SN,
+ TILE_OPC_INTHH,
+ TILE_OPC_INTHH_SN,
+ TILE_OPC_INTLB,
+ TILE_OPC_INTLB_SN,
+ TILE_OPC_INTLH,
+ TILE_OPC_INTLH_SN,
+ TILE_OPC_INV,
+ TILE_OPC_IRET,
+ TILE_OPC_JALB,
+ TILE_OPC_JALF,
+ TILE_OPC_JALR,
+ TILE_OPC_JALRP,
+ TILE_OPC_JB,
+ TILE_OPC_JF,
+ TILE_OPC_JR,
+ TILE_OPC_JRP,
+ TILE_OPC_LB,
+ TILE_OPC_LB_SN,
+ TILE_OPC_LB_U,
+ TILE_OPC_LB_U_SN,
+ TILE_OPC_LBADD,
+ TILE_OPC_LBADD_SN,
+ TILE_OPC_LBADD_U,
+ TILE_OPC_LBADD_U_SN,
+ TILE_OPC_LH,
+ TILE_OPC_LH_SN,
+ TILE_OPC_LH_U,
+ TILE_OPC_LH_U_SN,
+ TILE_OPC_LHADD,
+ TILE_OPC_LHADD_SN,
+ TILE_OPC_LHADD_U,
+ TILE_OPC_LHADD_U_SN,
+ TILE_OPC_LNK,
+ TILE_OPC_LNK_SN,
+ TILE_OPC_LW,
+ TILE_OPC_LW_SN,
+ TILE_OPC_LW_NA,
+ TILE_OPC_LW_NA_SN,
+ TILE_OPC_LWADD,
+ TILE_OPC_LWADD_SN,
+ TILE_OPC_LWADD_NA,
+ TILE_OPC_LWADD_NA_SN,
+ TILE_OPC_MAXB_U,
+ TILE_OPC_MAXB_U_SN,
+ TILE_OPC_MAXH,
+ TILE_OPC_MAXH_SN,
+ TILE_OPC_MAXIB_U,
+ TILE_OPC_MAXIB_U_SN,
+ TILE_OPC_MAXIH,
+ TILE_OPC_MAXIH_SN,
+ TILE_OPC_MF,
+ TILE_OPC_MFSPR,
+ TILE_OPC_MINB_U,
+ TILE_OPC_MINB_U_SN,
+ TILE_OPC_MINH,
+ TILE_OPC_MINH_SN,
+ TILE_OPC_MINIB_U,
+ TILE_OPC_MINIB_U_SN,
+ TILE_OPC_MINIH,
+ TILE_OPC_MINIH_SN,
+ TILE_OPC_MM,
+ TILE_OPC_MNZ,
+ TILE_OPC_MNZ_SN,
+ TILE_OPC_MNZB,
+ TILE_OPC_MNZB_SN,
+ TILE_OPC_MNZH,
+ TILE_OPC_MNZH_SN,
+ TILE_OPC_MTSPR,
+ TILE_OPC_MULHH_SS,
+ TILE_OPC_MULHH_SS_SN,
+ TILE_OPC_MULHH_SU,
+ TILE_OPC_MULHH_SU_SN,
+ TILE_OPC_MULHH_UU,
+ TILE_OPC_MULHH_UU_SN,
+ TILE_OPC_MULHHA_SS,
+ TILE_OPC_MULHHA_SS_SN,
+ TILE_OPC_MULHHA_SU,
+ TILE_OPC_MULHHA_SU_SN,
+ TILE_OPC_MULHHA_UU,
+ TILE_OPC_MULHHA_UU_SN,
+ TILE_OPC_MULHHSA_UU,
+ TILE_OPC_MULHHSA_UU_SN,
+ TILE_OPC_MULHL_SS,
+ TILE_OPC_MULHL_SS_SN,
+ TILE_OPC_MULHL_SU,
+ TILE_OPC_MULHL_SU_SN,
+ TILE_OPC_MULHL_US,
+ TILE_OPC_MULHL_US_SN,
+ TILE_OPC_MULHL_UU,
+ TILE_OPC_MULHL_UU_SN,
+ TILE_OPC_MULHLA_SS,
+ TILE_OPC_MULHLA_SS_SN,
+ TILE_OPC_MULHLA_SU,
+ TILE_OPC_MULHLA_SU_SN,
+ TILE_OPC_MULHLA_US,
+ TILE_OPC_MULHLA_US_SN,
+ TILE_OPC_MULHLA_UU,
+ TILE_OPC_MULHLA_UU_SN,
+ TILE_OPC_MULHLSA_UU,
+ TILE_OPC_MULHLSA_UU_SN,
+ TILE_OPC_MULLL_SS,
+ TILE_OPC_MULLL_SS_SN,
+ TILE_OPC_MULLL_SU,
+ TILE_OPC_MULLL_SU_SN,
+ TILE_OPC_MULLL_UU,
+ TILE_OPC_MULLL_UU_SN,
+ TILE_OPC_MULLLA_SS,
+ TILE_OPC_MULLLA_SS_SN,
+ TILE_OPC_MULLLA_SU,
+ TILE_OPC_MULLLA_SU_SN,
+ TILE_OPC_MULLLA_UU,
+ TILE_OPC_MULLLA_UU_SN,
+ TILE_OPC_MULLLSA_UU,
+ TILE_OPC_MULLLSA_UU_SN,
+ TILE_OPC_MVNZ,
+ TILE_OPC_MVNZ_SN,
+ TILE_OPC_MVZ,
+ TILE_OPC_MVZ_SN,
+ TILE_OPC_MZ,
+ TILE_OPC_MZ_SN,
+ TILE_OPC_MZB,
+ TILE_OPC_MZB_SN,
+ TILE_OPC_MZH,
+ TILE_OPC_MZH_SN,
+ TILE_OPC_NAP,
+ TILE_OPC_NOP,
+ TILE_OPC_NOR,
+ TILE_OPC_NOR_SN,
+ TILE_OPC_OR,
+ TILE_OPC_OR_SN,
+ TILE_OPC_ORI,
+ TILE_OPC_ORI_SN,
+ TILE_OPC_PACKBS_U,
+ TILE_OPC_PACKBS_U_SN,
+ TILE_OPC_PACKHB,
+ TILE_OPC_PACKHB_SN,
+ TILE_OPC_PACKHS,
+ TILE_OPC_PACKHS_SN,
+ TILE_OPC_PACKLB,
+ TILE_OPC_PACKLB_SN,
+ TILE_OPC_PCNT,
+ TILE_OPC_PCNT_SN,
+ TILE_OPC_RL,
+ TILE_OPC_RL_SN,
+ TILE_OPC_RLI,
+ TILE_OPC_RLI_SN,
+ TILE_OPC_S1A,
+ TILE_OPC_S1A_SN,
+ TILE_OPC_S2A,
+ TILE_OPC_S2A_SN,
+ TILE_OPC_S3A,
+ TILE_OPC_S3A_SN,
+ TILE_OPC_SADAB_U,
+ TILE_OPC_SADAB_U_SN,
+ TILE_OPC_SADAH,
+ TILE_OPC_SADAH_SN,
+ TILE_OPC_SADAH_U,
+ TILE_OPC_SADAH_U_SN,
+ TILE_OPC_SADB_U,
+ TILE_OPC_SADB_U_SN,
+ TILE_OPC_SADH,
+ TILE_OPC_SADH_SN,
+ TILE_OPC_SADH_U,
+ TILE_OPC_SADH_U_SN,
+ TILE_OPC_SB,
+ TILE_OPC_SBADD,
+ TILE_OPC_SEQ,
+ TILE_OPC_SEQ_SN,
+ TILE_OPC_SEQB,
+ TILE_OPC_SEQB_SN,
+ TILE_OPC_SEQH,
+ TILE_OPC_SEQH_SN,
+ TILE_OPC_SEQI,
+ TILE_OPC_SEQI_SN,
+ TILE_OPC_SEQIB,
+ TILE_OPC_SEQIB_SN,
+ TILE_OPC_SEQIH,
+ TILE_OPC_SEQIH_SN,
+ TILE_OPC_SH,
+ TILE_OPC_SHADD,
+ TILE_OPC_SHL,
+ TILE_OPC_SHL_SN,
+ TILE_OPC_SHLB,
+ TILE_OPC_SHLB_SN,
+ TILE_OPC_SHLH,
+ TILE_OPC_SHLH_SN,
+ TILE_OPC_SHLI,
+ TILE_OPC_SHLI_SN,
+ TILE_OPC_SHLIB,
+ TILE_OPC_SHLIB_SN,
+ TILE_OPC_SHLIH,
+ TILE_OPC_SHLIH_SN,
+ TILE_OPC_SHR,
+ TILE_OPC_SHR_SN,
+ TILE_OPC_SHRB,
+ TILE_OPC_SHRB_SN,
+ TILE_OPC_SHRH,
+ TILE_OPC_SHRH_SN,
+ TILE_OPC_SHRI,
+ TILE_OPC_SHRI_SN,
+ TILE_OPC_SHRIB,
+ TILE_OPC_SHRIB_SN,
+ TILE_OPC_SHRIH,
+ TILE_OPC_SHRIH_SN,
+ TILE_OPC_SLT,
+ TILE_OPC_SLT_SN,
+ TILE_OPC_SLT_U,
+ TILE_OPC_SLT_U_SN,
+ TILE_OPC_SLTB,
+ TILE_OPC_SLTB_SN,
+ TILE_OPC_SLTB_U,
+ TILE_OPC_SLTB_U_SN,
+ TILE_OPC_SLTE,
+ TILE_OPC_SLTE_SN,
+ TILE_OPC_SLTE_U,
+ TILE_OPC_SLTE_U_SN,
+ TILE_OPC_SLTEB,
+ TILE_OPC_SLTEB_SN,
+ TILE_OPC_SLTEB_U,
+ TILE_OPC_SLTEB_U_SN,
+ TILE_OPC_SLTEH,
+ TILE_OPC_SLTEH_SN,
+ TILE_OPC_SLTEH_U,
+ TILE_OPC_SLTEH_U_SN,
+ TILE_OPC_SLTH,
+ TILE_OPC_SLTH_SN,
+ TILE_OPC_SLTH_U,
+ TILE_OPC_SLTH_U_SN,
+ TILE_OPC_SLTI,
+ TILE_OPC_SLTI_SN,
+ TILE_OPC_SLTI_U,
+ TILE_OPC_SLTI_U_SN,
+ TILE_OPC_SLTIB,
+ TILE_OPC_SLTIB_SN,
+ TILE_OPC_SLTIB_U,
+ TILE_OPC_SLTIB_U_SN,
+ TILE_OPC_SLTIH,
+ TILE_OPC_SLTIH_SN,
+ TILE_OPC_SLTIH_U,
+ TILE_OPC_SLTIH_U_SN,
+ TILE_OPC_SNE,
+ TILE_OPC_SNE_SN,
+ TILE_OPC_SNEB,
+ TILE_OPC_SNEB_SN,
+ TILE_OPC_SNEH,
+ TILE_OPC_SNEH_SN,
+ TILE_OPC_SRA,
+ TILE_OPC_SRA_SN,
+ TILE_OPC_SRAB,
+ TILE_OPC_SRAB_SN,
+ TILE_OPC_SRAH,
+ TILE_OPC_SRAH_SN,
+ TILE_OPC_SRAI,
+ TILE_OPC_SRAI_SN,
+ TILE_OPC_SRAIB,
+ TILE_OPC_SRAIB_SN,
+ TILE_OPC_SRAIH,
+ TILE_OPC_SRAIH_SN,
+ TILE_OPC_SUB,
+ TILE_OPC_SUB_SN,
+ TILE_OPC_SUBB,
+ TILE_OPC_SUBB_SN,
+ TILE_OPC_SUBBS_U,
+ TILE_OPC_SUBBS_U_SN,
+ TILE_OPC_SUBH,
+ TILE_OPC_SUBH_SN,
+ TILE_OPC_SUBHS,
+ TILE_OPC_SUBHS_SN,
+ TILE_OPC_SUBS,
+ TILE_OPC_SUBS_SN,
+ TILE_OPC_SW,
+ TILE_OPC_SWADD,
+ TILE_OPC_SWINT0,
+ TILE_OPC_SWINT1,
+ TILE_OPC_SWINT2,
+ TILE_OPC_SWINT3,
+ TILE_OPC_TBLIDXB0,
+ TILE_OPC_TBLIDXB0_SN,
+ TILE_OPC_TBLIDXB1,
+ TILE_OPC_TBLIDXB1_SN,
+ TILE_OPC_TBLIDXB2,
+ TILE_OPC_TBLIDXB2_SN,
+ TILE_OPC_TBLIDXB3,
+ TILE_OPC_TBLIDXB3_SN,
+ TILE_OPC_TNS,
+ TILE_OPC_TNS_SN,
+ TILE_OPC_WH64,
+ TILE_OPC_XOR,
+ TILE_OPC_XOR_SN,
+ TILE_OPC_XORI,
+ TILE_OPC_XORI_SN,
+ TILE_OPC_NONE
+} tile_mnemonic;
+
+/* 64-bit pattern for a { bpt ; nop } bundle. */
+#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL
+
+
+#define TILE_ELF_MACHINE_CODE EM_TILEPRO
+
+#define TILE_ELF_NAME "elf32-tilepro"
+
+enum
+{
+ TILE_SN_MAX_OPERANDS = 6 /* route */
+};
+
+typedef enum
+{
+ TILE_SN_OPC_BZ,
+ TILE_SN_OPC_BNZ,
+ TILE_SN_OPC_JRR,
+ TILE_SN_OPC_FNOP,
+ TILE_SN_OPC_BLZ,
+ TILE_SN_OPC_NOP,
+ TILE_SN_OPC_MOVEI,
+ TILE_SN_OPC_MOVE,
+ TILE_SN_OPC_BGEZ,
+ TILE_SN_OPC_JR,
+ TILE_SN_OPC_BLEZ,
+ TILE_SN_OPC_BBNS,
+ TILE_SN_OPC_JALRR,
+ TILE_SN_OPC_BPT,
+ TILE_SN_OPC_JALR,
+ TILE_SN_OPC_SHR1,
+ TILE_SN_OPC_BGZ,
+ TILE_SN_OPC_BBS,
+ TILE_SN_OPC_SHL8II,
+ TILE_SN_OPC_ADDI,
+ TILE_SN_OPC_HALT,
+ TILE_SN_OPC_ROUTE,
+ TILE_SN_OPC_NONE
+} tile_sn_mnemonic;
+
+extern const unsigned char tile_sn_route_encode[6 * 6 * 6];
+extern const signed char tile_sn_route_decode[256][3];
+extern const char tile_sn_direction_names[6][5];
+extern const signed char tile_sn_dest_map[6][6];
+
+
+static __inline unsigned int
+get_BrOff_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_BrOff_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000);
+}
+
+static __inline unsigned int
+get_BrType_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0xf);
+}
+
+static __inline unsigned int
+get_Dest_Imm8_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x0000003f) |
+ (((unsigned int)(n >> 43)) & 0x000000c0);
+}
+
+static __inline unsigned int
+get_Dest_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 2)) & 0x3);
+}
+
+static __inline unsigned int
+get_Dest_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Dest_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Imm16_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm16_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xffff);
+}
+
+static __inline unsigned int
+get_Imm8_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0xff);
+}
+
+static __inline unsigned int
+get_Imm8_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0xff);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 20)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 51)) & 0x7f);
+}
+
+static __inline unsigned int
+get_ImmRROpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 8)) & 0x3);
+}
+
+static __inline unsigned int
+get_JOffLong_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000) |
+ (((unsigned int)(n >> 14)) & 0x001e0000) |
+ (((unsigned int)(n >> 16)) & 0x07e00000) |
+ (((unsigned int)(n >> 31)) & 0x18000000);
+}
+
+static __inline unsigned int
+get_JOff_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x00007fff) |
+ (((unsigned int)(n >> 20)) & 0x00018000) |
+ (((unsigned int)(n >> 14)) & 0x001e0000) |
+ (((unsigned int)(n >> 16)) & 0x07e00000) |
+ (((unsigned int)(n >> 31)) & 0x08000000);
+}
+
+static __inline unsigned int
+get_MF_Imm15_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x00003fff) |
+ (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_MMEnd_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMEnd_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 23)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MMStart_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 54)) & 0x1f);
+}
+
+static __inline unsigned int
+get_MT_Imm15_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 31)) & 0x0000003f) |
+ (((unsigned int)(n >> 37)) & 0x00003fc0) |
+ (((unsigned int)(n >> 44)) & 0x00004000);
+}
+
+static __inline unsigned int
+get_Mode(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 63)) & 0x1);
+}
+
+static __inline unsigned int
+get_NoRegOpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 10)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Opcode_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 28)) & 0x7);
+}
+
+static __inline unsigned int
+get_Opcode_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 27)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 59)) & 0xf);
+}
+
+static __inline unsigned int
+get_Opcode_Y2(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 56)) & 0x7);
+}
+
+static __inline unsigned int
+get_RROpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 4)) & 0xf);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x1ff);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 18)) & 0x3);
+}
+
+static __inline unsigned int
+get_RRROpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 49)) & 0x3);
+}
+
+static __inline unsigned int
+get_RouteOpcodeExtension_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_S_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 27)) & 0x1);
+}
+
+static __inline unsigned int
+get_S_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 58)) & 0x1);
+}
+
+static __inline unsigned int
+get_ShAmt_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_ShAmt_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_SrcA_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 6)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 37)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcA_Y2(tile_bundle_bits n)
+{
+ return (((n >> 26)) & 0x00000001) |
+ (((unsigned int)(n >> 50)) & 0x0000003e);
+}
+
+static __inline unsigned int
+get_SrcBDest_Y2(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 20)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x3f);
+}
+
+static __inline unsigned int
+get_SrcB_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x3f);
+}
+
+static __inline unsigned int
+get_Src_SN(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 0)) & 0x3);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 12)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnOpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 43)) & 0x1f);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 17)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_X1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 48)) & 0x3ff);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y0(tile_bundle_bits num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((n >> 17)) & 0x7);
+}
+
+static __inline unsigned int
+get_UnShOpcodeExtension_Y1(tile_bundle_bits n)
+{
+ return (((unsigned int)(n >> 48)) & 0x7);
+}
+
+
+static __inline int
+sign_extend(int n, int num_bits)
+{
+ int shift = (int)(sizeof(int) * 8 - num_bits);
+ return (n << shift) >> shift;
+}
+
+
+
+static __inline tile_bundle_bits
+create_BrOff_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_BrOff_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20);
+}
+
+static __inline tile_bundle_bits
+create_BrType_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Imm8_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+ (((tile_bundle_bits)(n & 0x000000c0)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Dest_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 2);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Dest_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xffff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm16_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xffff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xff) << 12);
+}
+
+static __inline tile_bundle_bits
+create_Imm8_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xff)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_ImmOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7f)) << 51);
+}
+
+static __inline tile_bundle_bits
+create_ImmRROpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 8);
+}
+
+static __inline tile_bundle_bits
+create_JOffLong_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+ (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+ (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+ (((tile_bundle_bits)(n & 0x18000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_JOff_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00007fff)) << 43) |
+ (((tile_bundle_bits)(n & 0x00018000)) << 20) |
+ (((tile_bundle_bits)(n & 0x001e0000)) << 14) |
+ (((tile_bundle_bits)(n & 0x07e00000)) << 16) |
+ (((tile_bundle_bits)(n & 0x08000000)) << 31);
+}
+
+static __inline tile_bundle_bits
+create_MF_Imm15_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x00003fff)) << 37) |
+ (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 18);
+}
+
+static __inline tile_bundle_bits
+create_MMEnd_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 23);
+}
+
+static __inline tile_bundle_bits
+create_MMStart_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 54);
+}
+
+static __inline tile_bundle_bits
+create_MT_Imm15_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x0000003f)) << 31) |
+ (((tile_bundle_bits)(n & 0x00003fc0)) << 37) |
+ (((tile_bundle_bits)(n & 0x00004000)) << 44);
+}
+
+static __inline tile_bundle_bits
+create_Mode(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1)) << 63);
+}
+
+static __inline tile_bundle_bits
+create_NoRegOpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 0);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 10);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7) << 28);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 27);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0xf)) << 59);
+}
+
+static __inline tile_bundle_bits
+create_Opcode_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7)) << 56);
+}
+
+static __inline tile_bundle_bits
+create_RROpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0xf) << 4);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1ff) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1ff)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 18);
+}
+
+static __inline tile_bundle_bits
+create_RRROpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3)) << 49);
+}
+
+static __inline tile_bundle_bits
+create_RouteOpcodeExtension_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 0);
+}
+
+static __inline tile_bundle_bits
+create_S_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1) << 27);
+}
+
+static __inline tile_bundle_bits
+create_S_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1)) << 58);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_ShAmt_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 6);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 37);
+}
+
+static __inline tile_bundle_bits
+create_SrcA_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x00000001) << 26) |
+ (((tile_bundle_bits)(n & 0x0000003e)) << 50);
+}
+
+static __inline tile_bundle_bits
+create_SrcBDest_Y2(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 20);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_SrcB_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_Src_SN(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3) << 0);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x1f) << 12);
+}
+
+static __inline tile_bundle_bits
+create_UnOpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x1f)) << 43);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x3ff) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_X1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x3ff)) << 48);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y0(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return ((n & 0x7) << 17);
+}
+
+static __inline tile_bundle_bits
+create_UnShOpcodeExtension_Y1(int num)
+{
+ const unsigned int n = (unsigned int)num;
+ return (((tile_bundle_bits)(n & 0x7)) << 48);
+}
+
+
+typedef unsigned short tile_sn_instruction_bits;
+
+
+typedef enum
+{
+ TILE_PIPELINE_X0,
+ TILE_PIPELINE_X1,
+ TILE_PIPELINE_Y0,
+ TILE_PIPELINE_Y1,
+ TILE_PIPELINE_Y2,
+} tile_pipeline;
+
+#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1)
+
+typedef enum
+{
+ TILE_OP_TYPE_REGISTER,
+ TILE_OP_TYPE_IMMEDIATE,
+ TILE_OP_TYPE_ADDRESS,
+ TILE_OP_TYPE_SPR
+} tile_operand_type;
+
+/* This is the bit that determines if a bundle is in the Y encoding. */
+#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63)
+
+enum
+{
+ /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */
+ TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3,
+
+ /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */
+ TILE_NUM_PIPELINE_ENCODINGS = 5,
+
+ /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */
+ TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3,
+
+ /* Instructions take this many bytes. */
+ TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES,
+
+ /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3,
+
+ /* Bundles should be aligned modulo this number of bytes. */
+ TILE_BUNDLE_ALIGNMENT_IN_BYTES =
+ (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES),
+
+ /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */
+ TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1,
+
+ /* Static network instructions take this many bytes. */
+ TILE_SN_INSTRUCTION_SIZE_IN_BYTES =
+ (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES),
+
+ /* Number of registers (some are magic, such as network I/O). */
+ TILE_NUM_REGISTERS = 64,
+
+ /* Number of static network registers. */
+ TILE_NUM_SN_REGISTERS = 4
+};
+
+
+struct tile_operand
+{
+ /* Is this operand a register, immediate or address? */
+ tile_operand_type type;
+
+ /* The default relocation type for this operand. */
+ signed int default_reloc : 16;
+
+ /* How many bits is this value? (used for range checking) */
+ unsigned int num_bits : 5;
+
+ /* Is the value signed? (used for range checking) */
+ unsigned int is_signed : 1;
+
+ /* Is this operand a source register? */
+ unsigned int is_src_reg : 1;
+
+ /* Is this operand written? (i.e. is it a destination register) */
+ unsigned int is_dest_reg : 1;
+
+ /* Is this operand PC-relative? */
+ unsigned int is_pc_relative : 1;
+
+ /* By how many bits do we right shift the value before inserting? */
+ unsigned int rightshift : 2;
+
+ /* Return the bits for this operand to be ORed into an existing bundle. */
+ tile_bundle_bits (*insert) (int op);
+
+ /* Extract this operand and return it. */
+ unsigned int (*extract) (tile_bundle_bits bundle);
+};
+
+
+extern const struct tile_operand tile_operands[];
+
+/* One finite-state machine per pipe for rapid instruction decoding. */
+extern const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS];
+
+
+struct tile_opcode
+{
+ /* The opcode mnemonic, e.g. "add" */
+ const char *name;
+
+ /* The enum value for this mnemonic. */
+ tile_mnemonic mnemonic;
+
+ /* A bit mask of which of the five pipes this instruction
+ is compatible with:
+ X0 0x01
+ X1 0x02
+ Y0 0x04
+ Y1 0x08
+ Y2 0x10 */
+ unsigned char pipes;
+
+ /* How many operands are there? */
+ unsigned char num_operands;
+
+ /* Which register does this write implicitly, or TREG_ZERO if none? */
+ unsigned char implicitly_written_register;
+
+ /* Can this be bundled with other instructions (almost always true). */
+ unsigned char can_bundle;
+
+ /* The description of the operands. Each of these is an
+ * index into the tile_operands[] table. */
+ unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS];
+
+ /* A mask of which bits have predefined values for each pipeline.
+ * This is useful for disassembly. */
+ tile_bundle_bits fixed_bit_masks[TILE_NUM_PIPELINE_ENCODINGS];
+
+ /* For each bit set in fixed_bit_masks, what the value is for this
+ * instruction. */
+ tile_bundle_bits fixed_bit_values[TILE_NUM_PIPELINE_ENCODINGS];
+};
+
+extern const struct tile_opcode tile_opcodes[];
+
+struct tile_sn_opcode
+{
+ /* The opcode mnemonic, e.g. "add" */
+ const char *name;
+
+ /* The enum value for this mnemonic. */
+ tile_sn_mnemonic mnemonic;
+
+ /* How many operands are there? */
+ unsigned char num_operands;
+
+ /* The description of the operands. Each of these is an
+ * index into the tile_operands[] table. */
+ unsigned char operands[TILE_SN_MAX_OPERANDS];
+
+ /* A mask of which bits have predefined values.
+ * This is useful for disassembly. */
+ tile_sn_instruction_bits fixed_bit_mask;
+
+ /* For each bit set in fixed_bit_masks, what its value is. */
+ tile_sn_instruction_bits fixed_bit_values;
+};
+
+extern const struct tile_sn_opcode tile_sn_opcodes[];
+
+/* Used for non-textual disassembly into structs. */
+struct tile_decoded_instruction
+{
+ const struct tile_opcode *opcode;
+ const struct tile_operand *operands[TILE_MAX_OPERANDS];
+ int operand_values[TILE_MAX_OPERANDS];
+};
+
+
+/* Disassemble a bundle into a struct for machine processing. */
+extern int parse_insn_tile(tile_bundle_bits bits,
+ unsigned int pc,
+ struct tile_decoded_instruction
+ decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]);
+
+
+/* Canonical names of all the registers. */
+/* ISSUE: This table lives in "tile-dis.c" */
+extern const char * const tile_register_names[];
+
+/* Descriptor for a special-purpose register. */
+struct tile_spr
+{
+ /* The number */
+ int number;
+
+ /* The name */
+ const char *name;
+};
+
+/* List of all the SPRs; ordered by increasing number. */
+extern const struct tile_spr tile_sprs[];
+
+/* Number of special-purpose registers. */
+extern const int tile_num_sprs;
+
+extern const char *
+get_tile_spr_name (int num);
+
+#endif /* opcode_tile_h */
diff --git a/arch/tile/include/asm/opcode_constants.h b/arch/tile/include/asm/opcode_constants.h
new file mode 100644
index 000000000000..37a9f2958cb1
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_OPCODE_CONSTANTS_H
+#define _ASM_TILE_OPCODE_CONSTANTS_H
+
+#include <arch/chip.h>
+
+#if CHIP_WORD_SIZE() == 64
+#include <asm/opcode_constants_64.h>
+#else
+#include <asm/opcode_constants_32.h>
+#endif
+
+#endif /* _ASM_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/opcode_constants_32.h b/arch/tile/include/asm/opcode_constants_32.h
new file mode 100644
index 000000000000..227d033b180c
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants_32.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+
+
+#ifndef _TILE_OPCODE_CONSTANTS_H
+#define _TILE_OPCODE_CONSTANTS_H
+enum
+{
+ ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
+ ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
+ ADDB_SPECIAL_0_OPCODE_X0 = 1,
+ ADDB_SPECIAL_0_OPCODE_X1 = 1,
+ ADDHS_SPECIAL_0_OPCODE_X0 = 99,
+ ADDHS_SPECIAL_0_OPCODE_X1 = 69,
+ ADDH_SPECIAL_0_OPCODE_X0 = 2,
+ ADDH_SPECIAL_0_OPCODE_X1 = 2,
+ ADDIB_IMM_0_OPCODE_X0 = 1,
+ ADDIB_IMM_0_OPCODE_X1 = 1,
+ ADDIH_IMM_0_OPCODE_X0 = 2,
+ ADDIH_IMM_0_OPCODE_X1 = 2,
+ ADDI_IMM_0_OPCODE_X0 = 3,
+ ADDI_IMM_0_OPCODE_X1 = 3,
+ ADDI_IMM_1_OPCODE_SN = 1,
+ ADDI_OPCODE_Y0 = 9,
+ ADDI_OPCODE_Y1 = 7,
+ ADDLIS_OPCODE_X0 = 1,
+ ADDLIS_OPCODE_X1 = 2,
+ ADDLI_OPCODE_X0 = 2,
+ ADDLI_OPCODE_X1 = 3,
+ ADDS_SPECIAL_0_OPCODE_X0 = 96,
+ ADDS_SPECIAL_0_OPCODE_X1 = 66,
+ ADD_SPECIAL_0_OPCODE_X0 = 3,
+ ADD_SPECIAL_0_OPCODE_X1 = 3,
+ ADD_SPECIAL_0_OPCODE_Y0 = 0,
+ ADD_SPECIAL_0_OPCODE_Y1 = 0,
+ ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
+ ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
+ ANDI_IMM_0_OPCODE_X0 = 1,
+ ANDI_IMM_0_OPCODE_X1 = 4,
+ ANDI_OPCODE_Y0 = 10,
+ ANDI_OPCODE_Y1 = 8,
+ AND_SPECIAL_0_OPCODE_X0 = 6,
+ AND_SPECIAL_0_OPCODE_X1 = 4,
+ AND_SPECIAL_2_OPCODE_Y0 = 0,
+ AND_SPECIAL_2_OPCODE_Y1 = 0,
+ AULI_OPCODE_X0 = 3,
+ AULI_OPCODE_X1 = 4,
+ AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
+ AVGH_SPECIAL_0_OPCODE_X0 = 8,
+ BBNST_BRANCH_OPCODE_X1 = 15,
+ BBNS_BRANCH_OPCODE_X1 = 14,
+ BBNS_OPCODE_SN = 63,
+ BBST_BRANCH_OPCODE_X1 = 13,
+ BBS_BRANCH_OPCODE_X1 = 12,
+ BBS_OPCODE_SN = 62,
+ BGEZT_BRANCH_OPCODE_X1 = 7,
+ BGEZ_BRANCH_OPCODE_X1 = 6,
+ BGEZ_OPCODE_SN = 61,
+ BGZT_BRANCH_OPCODE_X1 = 5,
+ BGZ_BRANCH_OPCODE_X1 = 4,
+ BGZ_OPCODE_SN = 58,
+ BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
+ BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
+ BLEZT_BRANCH_OPCODE_X1 = 11,
+ BLEZ_BRANCH_OPCODE_X1 = 10,
+ BLEZ_OPCODE_SN = 59,
+ BLZT_BRANCH_OPCODE_X1 = 9,
+ BLZ_BRANCH_OPCODE_X1 = 8,
+ BLZ_OPCODE_SN = 60,
+ BNZT_BRANCH_OPCODE_X1 = 3,
+ BNZ_BRANCH_OPCODE_X1 = 2,
+ BNZ_OPCODE_SN = 57,
+ BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
+ BRANCH_OPCODE_X1 = 5,
+ BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
+ BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
+ BZT_BRANCH_OPCODE_X1 = 1,
+ BZ_BRANCH_OPCODE_X1 = 0,
+ BZ_OPCODE_SN = 56,
+ CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
+ CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
+ CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
+ CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
+ CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
+ CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
+ DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
+ DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
+ DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
+ FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
+ FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
+ FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
+ FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
+ HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
+ ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
+ ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
+ ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
+ IMM_0_OPCODE_SN = 0,
+ IMM_0_OPCODE_X0 = 4,
+ IMM_0_OPCODE_X1 = 6,
+ IMM_1_OPCODE_SN = 1,
+ IMM_OPCODE_0_X0 = 5,
+ INTHB_SPECIAL_0_OPCODE_X0 = 11,
+ INTHB_SPECIAL_0_OPCODE_X1 = 5,
+ INTHH_SPECIAL_0_OPCODE_X0 = 12,
+ INTHH_SPECIAL_0_OPCODE_X1 = 6,
+ INTLB_SPECIAL_0_OPCODE_X0 = 13,
+ INTLB_SPECIAL_0_OPCODE_X1 = 7,
+ INTLH_SPECIAL_0_OPCODE_X0 = 14,
+ INTLH_SPECIAL_0_OPCODE_X1 = 8,
+ INV_UN_0_SHUN_0_OPCODE_X1 = 8,
+ IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
+ JALB_OPCODE_X1 = 13,
+ JALF_OPCODE_X1 = 12,
+ JALRP_SPECIAL_0_OPCODE_X1 = 9,
+ JALRR_IMM_1_OPCODE_SN = 3,
+ JALR_RR_IMM_0_OPCODE_SN = 5,
+ JALR_SPECIAL_0_OPCODE_X1 = 10,
+ JB_OPCODE_X1 = 11,
+ JF_OPCODE_X1 = 10,
+ JRP_SPECIAL_0_OPCODE_X1 = 11,
+ JRR_IMM_1_OPCODE_SN = 2,
+ JR_RR_IMM_0_OPCODE_SN = 4,
+ JR_SPECIAL_0_OPCODE_X1 = 12,
+ LBADD_IMM_0_OPCODE_X1 = 22,
+ LBADD_U_IMM_0_OPCODE_X1 = 23,
+ LB_OPCODE_Y2 = 0,
+ LB_UN_0_SHUN_0_OPCODE_X1 = 10,
+ LB_U_OPCODE_Y2 = 1,
+ LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
+ LHADD_IMM_0_OPCODE_X1 = 24,
+ LHADD_U_IMM_0_OPCODE_X1 = 25,
+ LH_OPCODE_Y2 = 2,
+ LH_UN_0_SHUN_0_OPCODE_X1 = 12,
+ LH_U_OPCODE_Y2 = 3,
+ LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
+ LNK_SPECIAL_0_OPCODE_X1 = 13,
+ LWADD_IMM_0_OPCODE_X1 = 26,
+ LWADD_NA_IMM_0_OPCODE_X1 = 27,
+ LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
+ LW_OPCODE_Y2 = 4,
+ LW_UN_0_SHUN_0_OPCODE_X1 = 14,
+ MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
+ MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
+ MAXH_SPECIAL_0_OPCODE_X0 = 16,
+ MAXH_SPECIAL_0_OPCODE_X1 = 15,
+ MAXIB_U_IMM_0_OPCODE_X0 = 4,
+ MAXIB_U_IMM_0_OPCODE_X1 = 5,
+ MAXIH_IMM_0_OPCODE_X0 = 5,
+ MAXIH_IMM_0_OPCODE_X1 = 6,
+ MFSPR_IMM_0_OPCODE_X1 = 7,
+ MF_UN_0_SHUN_0_OPCODE_X1 = 15,
+ MINB_U_SPECIAL_0_OPCODE_X0 = 17,
+ MINB_U_SPECIAL_0_OPCODE_X1 = 16,
+ MINH_SPECIAL_0_OPCODE_X0 = 18,
+ MINH_SPECIAL_0_OPCODE_X1 = 17,
+ MINIB_U_IMM_0_OPCODE_X0 = 6,
+ MINIB_U_IMM_0_OPCODE_X1 = 8,
+ MINIH_IMM_0_OPCODE_X0 = 7,
+ MINIH_IMM_0_OPCODE_X1 = 9,
+ MM_OPCODE_X0 = 6,
+ MM_OPCODE_X1 = 7,
+ MNZB_SPECIAL_0_OPCODE_X0 = 19,
+ MNZB_SPECIAL_0_OPCODE_X1 = 18,
+ MNZH_SPECIAL_0_OPCODE_X0 = 20,
+ MNZH_SPECIAL_0_OPCODE_X1 = 19,
+ MNZ_SPECIAL_0_OPCODE_X0 = 21,
+ MNZ_SPECIAL_0_OPCODE_X1 = 20,
+ MNZ_SPECIAL_1_OPCODE_Y0 = 0,
+ MNZ_SPECIAL_1_OPCODE_Y1 = 1,
+ MOVEI_IMM_1_OPCODE_SN = 0,
+ MOVE_RR_IMM_0_OPCODE_SN = 8,
+ MTSPR_IMM_0_OPCODE_X1 = 10,
+ MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
+ MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
+ MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
+ MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
+ MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
+ MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
+ MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
+ MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
+ MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
+ MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
+ MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
+ MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
+ MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
+ MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
+ MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
+ MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
+ MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
+ MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
+ MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
+ MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
+ MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
+ MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
+ MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
+ MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
+ MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
+ MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
+ MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
+ MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
+ MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
+ MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
+ MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
+ MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
+ MVNZ_SPECIAL_0_OPCODE_X0 = 45,
+ MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
+ MVZ_SPECIAL_0_OPCODE_X0 = 46,
+ MVZ_SPECIAL_1_OPCODE_Y0 = 2,
+ MZB_SPECIAL_0_OPCODE_X0 = 47,
+ MZB_SPECIAL_0_OPCODE_X1 = 21,
+ MZH_SPECIAL_0_OPCODE_X0 = 48,
+ MZH_SPECIAL_0_OPCODE_X1 = 22,
+ MZ_SPECIAL_0_OPCODE_X0 = 49,
+ MZ_SPECIAL_0_OPCODE_X1 = 23,
+ MZ_SPECIAL_1_OPCODE_Y0 = 3,
+ MZ_SPECIAL_1_OPCODE_Y1 = 2,
+ NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
+ NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
+ NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
+ NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
+ NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
+ NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
+ NOREG_RR_IMM_0_OPCODE_SN = 0,
+ NOR_SPECIAL_0_OPCODE_X0 = 50,
+ NOR_SPECIAL_0_OPCODE_X1 = 24,
+ NOR_SPECIAL_2_OPCODE_Y0 = 1,
+ NOR_SPECIAL_2_OPCODE_Y1 = 1,
+ ORI_IMM_0_OPCODE_X0 = 8,
+ ORI_IMM_0_OPCODE_X1 = 11,
+ ORI_OPCODE_Y0 = 11,
+ ORI_OPCODE_Y1 = 9,
+ OR_SPECIAL_0_OPCODE_X0 = 51,
+ OR_SPECIAL_0_OPCODE_X1 = 25,
+ OR_SPECIAL_2_OPCODE_Y0 = 2,
+ OR_SPECIAL_2_OPCODE_Y1 = 2,
+ PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
+ PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
+ PACKHB_SPECIAL_0_OPCODE_X0 = 52,
+ PACKHB_SPECIAL_0_OPCODE_X1 = 26,
+ PACKHS_SPECIAL_0_OPCODE_X0 = 102,
+ PACKHS_SPECIAL_0_OPCODE_X1 = 72,
+ PACKLB_SPECIAL_0_OPCODE_X0 = 53,
+ PACKLB_SPECIAL_0_OPCODE_X1 = 27,
+ PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
+ PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
+ RLI_SHUN_0_OPCODE_X0 = 1,
+ RLI_SHUN_0_OPCODE_X1 = 1,
+ RLI_SHUN_0_OPCODE_Y0 = 1,
+ RLI_SHUN_0_OPCODE_Y1 = 1,
+ RL_SPECIAL_0_OPCODE_X0 = 54,
+ RL_SPECIAL_0_OPCODE_X1 = 28,
+ RL_SPECIAL_3_OPCODE_Y0 = 0,
+ RL_SPECIAL_3_OPCODE_Y1 = 0,
+ RR_IMM_0_OPCODE_SN = 0,
+ S1A_SPECIAL_0_OPCODE_X0 = 55,
+ S1A_SPECIAL_0_OPCODE_X1 = 29,
+ S1A_SPECIAL_0_OPCODE_Y0 = 1,
+ S1A_SPECIAL_0_OPCODE_Y1 = 1,
+ S2A_SPECIAL_0_OPCODE_X0 = 56,
+ S2A_SPECIAL_0_OPCODE_X1 = 30,
+ S2A_SPECIAL_0_OPCODE_Y0 = 2,
+ S2A_SPECIAL_0_OPCODE_Y1 = 2,
+ S3A_SPECIAL_0_OPCODE_X0 = 57,
+ S3A_SPECIAL_0_OPCODE_X1 = 31,
+ S3A_SPECIAL_5_OPCODE_Y0 = 1,
+ S3A_SPECIAL_5_OPCODE_Y1 = 1,
+ SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
+ SADAH_SPECIAL_0_OPCODE_X0 = 59,
+ SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
+ SADB_U_SPECIAL_0_OPCODE_X0 = 61,
+ SADH_SPECIAL_0_OPCODE_X0 = 62,
+ SADH_U_SPECIAL_0_OPCODE_X0 = 63,
+ SBADD_IMM_0_OPCODE_X1 = 28,
+ SB_OPCODE_Y2 = 5,
+ SB_SPECIAL_0_OPCODE_X1 = 32,
+ SEQB_SPECIAL_0_OPCODE_X0 = 64,
+ SEQB_SPECIAL_0_OPCODE_X1 = 33,
+ SEQH_SPECIAL_0_OPCODE_X0 = 65,
+ SEQH_SPECIAL_0_OPCODE_X1 = 34,
+ SEQIB_IMM_0_OPCODE_X0 = 9,
+ SEQIB_IMM_0_OPCODE_X1 = 12,
+ SEQIH_IMM_0_OPCODE_X0 = 10,
+ SEQIH_IMM_0_OPCODE_X1 = 13,
+ SEQI_IMM_0_OPCODE_X0 = 11,
+ SEQI_IMM_0_OPCODE_X1 = 14,
+ SEQI_OPCODE_Y0 = 12,
+ SEQI_OPCODE_Y1 = 10,
+ SEQ_SPECIAL_0_OPCODE_X0 = 66,
+ SEQ_SPECIAL_0_OPCODE_X1 = 35,
+ SEQ_SPECIAL_5_OPCODE_Y0 = 2,
+ SEQ_SPECIAL_5_OPCODE_Y1 = 2,
+ SHADD_IMM_0_OPCODE_X1 = 29,
+ SHL8II_IMM_0_OPCODE_SN = 3,
+ SHLB_SPECIAL_0_OPCODE_X0 = 67,
+ SHLB_SPECIAL_0_OPCODE_X1 = 36,
+ SHLH_SPECIAL_0_OPCODE_X0 = 68,
+ SHLH_SPECIAL_0_OPCODE_X1 = 37,
+ SHLIB_SHUN_0_OPCODE_X0 = 2,
+ SHLIB_SHUN_0_OPCODE_X1 = 2,
+ SHLIH_SHUN_0_OPCODE_X0 = 3,
+ SHLIH_SHUN_0_OPCODE_X1 = 3,
+ SHLI_SHUN_0_OPCODE_X0 = 4,
+ SHLI_SHUN_0_OPCODE_X1 = 4,
+ SHLI_SHUN_0_OPCODE_Y0 = 2,
+ SHLI_SHUN_0_OPCODE_Y1 = 2,
+ SHL_SPECIAL_0_OPCODE_X0 = 69,
+ SHL_SPECIAL_0_OPCODE_X1 = 38,
+ SHL_SPECIAL_3_OPCODE_Y0 = 1,
+ SHL_SPECIAL_3_OPCODE_Y1 = 1,
+ SHR1_RR_IMM_0_OPCODE_SN = 9,
+ SHRB_SPECIAL_0_OPCODE_X0 = 70,
+ SHRB_SPECIAL_0_OPCODE_X1 = 39,
+ SHRH_SPECIAL_0_OPCODE_X0 = 71,
+ SHRH_SPECIAL_0_OPCODE_X1 = 40,
+ SHRIB_SHUN_0_OPCODE_X0 = 5,
+ SHRIB_SHUN_0_OPCODE_X1 = 5,
+ SHRIH_SHUN_0_OPCODE_X0 = 6,
+ SHRIH_SHUN_0_OPCODE_X1 = 6,
+ SHRI_SHUN_0_OPCODE_X0 = 7,
+ SHRI_SHUN_0_OPCODE_X1 = 7,
+ SHRI_SHUN_0_OPCODE_Y0 = 3,
+ SHRI_SHUN_0_OPCODE_Y1 = 3,
+ SHR_SPECIAL_0_OPCODE_X0 = 72,
+ SHR_SPECIAL_0_OPCODE_X1 = 41,
+ SHR_SPECIAL_3_OPCODE_Y0 = 2,
+ SHR_SPECIAL_3_OPCODE_Y1 = 2,
+ SHUN_0_OPCODE_X0 = 7,
+ SHUN_0_OPCODE_X1 = 8,
+ SHUN_0_OPCODE_Y0 = 13,
+ SHUN_0_OPCODE_Y1 = 11,
+ SH_OPCODE_Y2 = 6,
+ SH_SPECIAL_0_OPCODE_X1 = 42,
+ SLTB_SPECIAL_0_OPCODE_X0 = 73,
+ SLTB_SPECIAL_0_OPCODE_X1 = 43,
+ SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
+ SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
+ SLTEB_SPECIAL_0_OPCODE_X0 = 75,
+ SLTEB_SPECIAL_0_OPCODE_X1 = 45,
+ SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
+ SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
+ SLTEH_SPECIAL_0_OPCODE_X0 = 77,
+ SLTEH_SPECIAL_0_OPCODE_X1 = 47,
+ SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
+ SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
+ SLTE_SPECIAL_0_OPCODE_X0 = 79,
+ SLTE_SPECIAL_0_OPCODE_X1 = 49,
+ SLTE_SPECIAL_4_OPCODE_Y0 = 0,
+ SLTE_SPECIAL_4_OPCODE_Y1 = 0,
+ SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
+ SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
+ SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
+ SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
+ SLTH_SPECIAL_0_OPCODE_X0 = 81,
+ SLTH_SPECIAL_0_OPCODE_X1 = 51,
+ SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
+ SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
+ SLTIB_IMM_0_OPCODE_X0 = 12,
+ SLTIB_IMM_0_OPCODE_X1 = 15,
+ SLTIB_U_IMM_0_OPCODE_X0 = 13,
+ SLTIB_U_IMM_0_OPCODE_X1 = 16,
+ SLTIH_IMM_0_OPCODE_X0 = 14,
+ SLTIH_IMM_0_OPCODE_X1 = 17,
+ SLTIH_U_IMM_0_OPCODE_X0 = 15,
+ SLTIH_U_IMM_0_OPCODE_X1 = 18,
+ SLTI_IMM_0_OPCODE_X0 = 16,
+ SLTI_IMM_0_OPCODE_X1 = 19,
+ SLTI_OPCODE_Y0 = 14,
+ SLTI_OPCODE_Y1 = 12,
+ SLTI_U_IMM_0_OPCODE_X0 = 17,
+ SLTI_U_IMM_0_OPCODE_X1 = 20,
+ SLTI_U_OPCODE_Y0 = 15,
+ SLTI_U_OPCODE_Y1 = 13,
+ SLT_SPECIAL_0_OPCODE_X0 = 83,
+ SLT_SPECIAL_0_OPCODE_X1 = 53,
+ SLT_SPECIAL_4_OPCODE_Y0 = 2,
+ SLT_SPECIAL_4_OPCODE_Y1 = 2,
+ SLT_U_SPECIAL_0_OPCODE_X0 = 84,
+ SLT_U_SPECIAL_0_OPCODE_X1 = 54,
+ SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
+ SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
+ SNEB_SPECIAL_0_OPCODE_X0 = 85,
+ SNEB_SPECIAL_0_OPCODE_X1 = 55,
+ SNEH_SPECIAL_0_OPCODE_X0 = 86,
+ SNEH_SPECIAL_0_OPCODE_X1 = 56,
+ SNE_SPECIAL_0_OPCODE_X0 = 87,
+ SNE_SPECIAL_0_OPCODE_X1 = 57,
+ SNE_SPECIAL_5_OPCODE_Y0 = 3,
+ SNE_SPECIAL_5_OPCODE_Y1 = 3,
+ SPECIAL_0_OPCODE_X0 = 0,
+ SPECIAL_0_OPCODE_X1 = 1,
+ SPECIAL_0_OPCODE_Y0 = 1,
+ SPECIAL_0_OPCODE_Y1 = 1,
+ SPECIAL_1_OPCODE_Y0 = 2,
+ SPECIAL_1_OPCODE_Y1 = 2,
+ SPECIAL_2_OPCODE_Y0 = 3,
+ SPECIAL_2_OPCODE_Y1 = 3,
+ SPECIAL_3_OPCODE_Y0 = 4,
+ SPECIAL_3_OPCODE_Y1 = 4,
+ SPECIAL_4_OPCODE_Y0 = 5,
+ SPECIAL_4_OPCODE_Y1 = 5,
+ SPECIAL_5_OPCODE_Y0 = 6,
+ SPECIAL_5_OPCODE_Y1 = 6,
+ SPECIAL_6_OPCODE_Y0 = 7,
+ SPECIAL_7_OPCODE_Y0 = 8,
+ SRAB_SPECIAL_0_OPCODE_X0 = 88,
+ SRAB_SPECIAL_0_OPCODE_X1 = 58,
+ SRAH_SPECIAL_0_OPCODE_X0 = 89,
+ SRAH_SPECIAL_0_OPCODE_X1 = 59,
+ SRAIB_SHUN_0_OPCODE_X0 = 8,
+ SRAIB_SHUN_0_OPCODE_X1 = 8,
+ SRAIH_SHUN_0_OPCODE_X0 = 9,
+ SRAIH_SHUN_0_OPCODE_X1 = 9,
+ SRAI_SHUN_0_OPCODE_X0 = 10,
+ SRAI_SHUN_0_OPCODE_X1 = 10,
+ SRAI_SHUN_0_OPCODE_Y0 = 4,
+ SRAI_SHUN_0_OPCODE_Y1 = 4,
+ SRA_SPECIAL_0_OPCODE_X0 = 90,
+ SRA_SPECIAL_0_OPCODE_X1 = 60,
+ SRA_SPECIAL_3_OPCODE_Y0 = 3,
+ SRA_SPECIAL_3_OPCODE_Y1 = 3,
+ SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
+ SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
+ SUBB_SPECIAL_0_OPCODE_X0 = 91,
+ SUBB_SPECIAL_0_OPCODE_X1 = 61,
+ SUBHS_SPECIAL_0_OPCODE_X0 = 101,
+ SUBHS_SPECIAL_0_OPCODE_X1 = 71,
+ SUBH_SPECIAL_0_OPCODE_X0 = 92,
+ SUBH_SPECIAL_0_OPCODE_X1 = 62,
+ SUBS_SPECIAL_0_OPCODE_X0 = 97,
+ SUBS_SPECIAL_0_OPCODE_X1 = 67,
+ SUB_SPECIAL_0_OPCODE_X0 = 93,
+ SUB_SPECIAL_0_OPCODE_X1 = 63,
+ SUB_SPECIAL_0_OPCODE_Y0 = 3,
+ SUB_SPECIAL_0_OPCODE_Y1 = 3,
+ SWADD_IMM_0_OPCODE_X1 = 30,
+ SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
+ SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
+ SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
+ SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
+ SW_OPCODE_Y2 = 7,
+ SW_SPECIAL_0_OPCODE_X1 = 64,
+ TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
+ TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
+ TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
+ TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
+ TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
+ TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
+ TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
+ TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
+ TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
+ UN_0_SHUN_0_OPCODE_X0 = 11,
+ UN_0_SHUN_0_OPCODE_X1 = 11,
+ UN_0_SHUN_0_OPCODE_Y0 = 5,
+ UN_0_SHUN_0_OPCODE_Y1 = 5,
+ WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
+ XORI_IMM_0_OPCODE_X0 = 2,
+ XORI_IMM_0_OPCODE_X1 = 21,
+ XOR_SPECIAL_0_OPCODE_X0 = 94,
+ XOR_SPECIAL_0_OPCODE_X1 = 65,
+ XOR_SPECIAL_2_OPCODE_Y0 = 3,
+ XOR_SPECIAL_2_OPCODE_Y1 = 3
+};
+
+#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/opcode_constants_64.h b/arch/tile/include/asm/opcode_constants_64.h
new file mode 100644
index 000000000000..227d033b180c
--- /dev/null
+++ b/arch/tile/include/asm/opcode_constants_64.h
@@ -0,0 +1,480 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/* This file is machine-generated; DO NOT EDIT! */
+
+
+#ifndef _TILE_OPCODE_CONSTANTS_H
+#define _TILE_OPCODE_CONSTANTS_H
+enum
+{
+ ADDBS_U_SPECIAL_0_OPCODE_X0 = 98,
+ ADDBS_U_SPECIAL_0_OPCODE_X1 = 68,
+ ADDB_SPECIAL_0_OPCODE_X0 = 1,
+ ADDB_SPECIAL_0_OPCODE_X1 = 1,
+ ADDHS_SPECIAL_0_OPCODE_X0 = 99,
+ ADDHS_SPECIAL_0_OPCODE_X1 = 69,
+ ADDH_SPECIAL_0_OPCODE_X0 = 2,
+ ADDH_SPECIAL_0_OPCODE_X1 = 2,
+ ADDIB_IMM_0_OPCODE_X0 = 1,
+ ADDIB_IMM_0_OPCODE_X1 = 1,
+ ADDIH_IMM_0_OPCODE_X0 = 2,
+ ADDIH_IMM_0_OPCODE_X1 = 2,
+ ADDI_IMM_0_OPCODE_X0 = 3,
+ ADDI_IMM_0_OPCODE_X1 = 3,
+ ADDI_IMM_1_OPCODE_SN = 1,
+ ADDI_OPCODE_Y0 = 9,
+ ADDI_OPCODE_Y1 = 7,
+ ADDLIS_OPCODE_X0 = 1,
+ ADDLIS_OPCODE_X1 = 2,
+ ADDLI_OPCODE_X0 = 2,
+ ADDLI_OPCODE_X1 = 3,
+ ADDS_SPECIAL_0_OPCODE_X0 = 96,
+ ADDS_SPECIAL_0_OPCODE_X1 = 66,
+ ADD_SPECIAL_0_OPCODE_X0 = 3,
+ ADD_SPECIAL_0_OPCODE_X1 = 3,
+ ADD_SPECIAL_0_OPCODE_Y0 = 0,
+ ADD_SPECIAL_0_OPCODE_Y1 = 0,
+ ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4,
+ ADIFFH_SPECIAL_0_OPCODE_X0 = 5,
+ ANDI_IMM_0_OPCODE_X0 = 1,
+ ANDI_IMM_0_OPCODE_X1 = 4,
+ ANDI_OPCODE_Y0 = 10,
+ ANDI_OPCODE_Y1 = 8,
+ AND_SPECIAL_0_OPCODE_X0 = 6,
+ AND_SPECIAL_0_OPCODE_X1 = 4,
+ AND_SPECIAL_2_OPCODE_Y0 = 0,
+ AND_SPECIAL_2_OPCODE_Y1 = 0,
+ AULI_OPCODE_X0 = 3,
+ AULI_OPCODE_X1 = 4,
+ AVGB_U_SPECIAL_0_OPCODE_X0 = 7,
+ AVGH_SPECIAL_0_OPCODE_X0 = 8,
+ BBNST_BRANCH_OPCODE_X1 = 15,
+ BBNS_BRANCH_OPCODE_X1 = 14,
+ BBNS_OPCODE_SN = 63,
+ BBST_BRANCH_OPCODE_X1 = 13,
+ BBS_BRANCH_OPCODE_X1 = 12,
+ BBS_OPCODE_SN = 62,
+ BGEZT_BRANCH_OPCODE_X1 = 7,
+ BGEZ_BRANCH_OPCODE_X1 = 6,
+ BGEZ_OPCODE_SN = 61,
+ BGZT_BRANCH_OPCODE_X1 = 5,
+ BGZ_BRANCH_OPCODE_X1 = 4,
+ BGZ_OPCODE_SN = 58,
+ BITX_UN_0_SHUN_0_OPCODE_X0 = 1,
+ BITX_UN_0_SHUN_0_OPCODE_Y0 = 1,
+ BLEZT_BRANCH_OPCODE_X1 = 11,
+ BLEZ_BRANCH_OPCODE_X1 = 10,
+ BLEZ_OPCODE_SN = 59,
+ BLZT_BRANCH_OPCODE_X1 = 9,
+ BLZ_BRANCH_OPCODE_X1 = 8,
+ BLZ_OPCODE_SN = 60,
+ BNZT_BRANCH_OPCODE_X1 = 3,
+ BNZ_BRANCH_OPCODE_X1 = 2,
+ BNZ_OPCODE_SN = 57,
+ BPT_NOREG_RR_IMM_0_OPCODE_SN = 1,
+ BRANCH_OPCODE_X1 = 5,
+ BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2,
+ BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2,
+ BZT_BRANCH_OPCODE_X1 = 1,
+ BZ_BRANCH_OPCODE_X1 = 0,
+ BZ_OPCODE_SN = 56,
+ CLZ_UN_0_SHUN_0_OPCODE_X0 = 3,
+ CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3,
+ CRC32_32_SPECIAL_0_OPCODE_X0 = 9,
+ CRC32_8_SPECIAL_0_OPCODE_X0 = 10,
+ CTZ_UN_0_SHUN_0_OPCODE_X0 = 4,
+ CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4,
+ DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1,
+ DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2,
+ DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95,
+ FINV_UN_0_SHUN_0_OPCODE_X1 = 3,
+ FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4,
+ FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3,
+ FNOP_UN_0_SHUN_0_OPCODE_X0 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_X1 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5,
+ FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1,
+ HALT_NOREG_RR_IMM_0_OPCODE_SN = 0,
+ ICOH_UN_0_SHUN_0_OPCODE_X1 = 6,
+ ILL_UN_0_SHUN_0_OPCODE_X1 = 7,
+ ILL_UN_0_SHUN_0_OPCODE_Y1 = 2,
+ IMM_0_OPCODE_SN = 0,
+ IMM_0_OPCODE_X0 = 4,
+ IMM_0_OPCODE_X1 = 6,
+ IMM_1_OPCODE_SN = 1,
+ IMM_OPCODE_0_X0 = 5,
+ INTHB_SPECIAL_0_OPCODE_X0 = 11,
+ INTHB_SPECIAL_0_OPCODE_X1 = 5,
+ INTHH_SPECIAL_0_OPCODE_X0 = 12,
+ INTHH_SPECIAL_0_OPCODE_X1 = 6,
+ INTLB_SPECIAL_0_OPCODE_X0 = 13,
+ INTLB_SPECIAL_0_OPCODE_X1 = 7,
+ INTLH_SPECIAL_0_OPCODE_X0 = 14,
+ INTLH_SPECIAL_0_OPCODE_X1 = 8,
+ INV_UN_0_SHUN_0_OPCODE_X1 = 8,
+ IRET_UN_0_SHUN_0_OPCODE_X1 = 9,
+ JALB_OPCODE_X1 = 13,
+ JALF_OPCODE_X1 = 12,
+ JALRP_SPECIAL_0_OPCODE_X1 = 9,
+ JALRR_IMM_1_OPCODE_SN = 3,
+ JALR_RR_IMM_0_OPCODE_SN = 5,
+ JALR_SPECIAL_0_OPCODE_X1 = 10,
+ JB_OPCODE_X1 = 11,
+ JF_OPCODE_X1 = 10,
+ JRP_SPECIAL_0_OPCODE_X1 = 11,
+ JRR_IMM_1_OPCODE_SN = 2,
+ JR_RR_IMM_0_OPCODE_SN = 4,
+ JR_SPECIAL_0_OPCODE_X1 = 12,
+ LBADD_IMM_0_OPCODE_X1 = 22,
+ LBADD_U_IMM_0_OPCODE_X1 = 23,
+ LB_OPCODE_Y2 = 0,
+ LB_UN_0_SHUN_0_OPCODE_X1 = 10,
+ LB_U_OPCODE_Y2 = 1,
+ LB_U_UN_0_SHUN_0_OPCODE_X1 = 11,
+ LHADD_IMM_0_OPCODE_X1 = 24,
+ LHADD_U_IMM_0_OPCODE_X1 = 25,
+ LH_OPCODE_Y2 = 2,
+ LH_UN_0_SHUN_0_OPCODE_X1 = 12,
+ LH_U_OPCODE_Y2 = 3,
+ LH_U_UN_0_SHUN_0_OPCODE_X1 = 13,
+ LNK_SPECIAL_0_OPCODE_X1 = 13,
+ LWADD_IMM_0_OPCODE_X1 = 26,
+ LWADD_NA_IMM_0_OPCODE_X1 = 27,
+ LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24,
+ LW_OPCODE_Y2 = 4,
+ LW_UN_0_SHUN_0_OPCODE_X1 = 14,
+ MAXB_U_SPECIAL_0_OPCODE_X0 = 15,
+ MAXB_U_SPECIAL_0_OPCODE_X1 = 14,
+ MAXH_SPECIAL_0_OPCODE_X0 = 16,
+ MAXH_SPECIAL_0_OPCODE_X1 = 15,
+ MAXIB_U_IMM_0_OPCODE_X0 = 4,
+ MAXIB_U_IMM_0_OPCODE_X1 = 5,
+ MAXIH_IMM_0_OPCODE_X0 = 5,
+ MAXIH_IMM_0_OPCODE_X1 = 6,
+ MFSPR_IMM_0_OPCODE_X1 = 7,
+ MF_UN_0_SHUN_0_OPCODE_X1 = 15,
+ MINB_U_SPECIAL_0_OPCODE_X0 = 17,
+ MINB_U_SPECIAL_0_OPCODE_X1 = 16,
+ MINH_SPECIAL_0_OPCODE_X0 = 18,
+ MINH_SPECIAL_0_OPCODE_X1 = 17,
+ MINIB_U_IMM_0_OPCODE_X0 = 6,
+ MINIB_U_IMM_0_OPCODE_X1 = 8,
+ MINIH_IMM_0_OPCODE_X0 = 7,
+ MINIH_IMM_0_OPCODE_X1 = 9,
+ MM_OPCODE_X0 = 6,
+ MM_OPCODE_X1 = 7,
+ MNZB_SPECIAL_0_OPCODE_X0 = 19,
+ MNZB_SPECIAL_0_OPCODE_X1 = 18,
+ MNZH_SPECIAL_0_OPCODE_X0 = 20,
+ MNZH_SPECIAL_0_OPCODE_X1 = 19,
+ MNZ_SPECIAL_0_OPCODE_X0 = 21,
+ MNZ_SPECIAL_0_OPCODE_X1 = 20,
+ MNZ_SPECIAL_1_OPCODE_Y0 = 0,
+ MNZ_SPECIAL_1_OPCODE_Y1 = 1,
+ MOVEI_IMM_1_OPCODE_SN = 0,
+ MOVE_RR_IMM_0_OPCODE_SN = 8,
+ MTSPR_IMM_0_OPCODE_X1 = 10,
+ MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22,
+ MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0,
+ MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23,
+ MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24,
+ MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1,
+ MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25,
+ MULHH_SS_SPECIAL_0_OPCODE_X0 = 26,
+ MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0,
+ MULHH_SU_SPECIAL_0_OPCODE_X0 = 27,
+ MULHH_UU_SPECIAL_0_OPCODE_X0 = 28,
+ MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1,
+ MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29,
+ MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30,
+ MULHLA_US_SPECIAL_0_OPCODE_X0 = 31,
+ MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32,
+ MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33,
+ MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0,
+ MULHL_SS_SPECIAL_0_OPCODE_X0 = 34,
+ MULHL_SU_SPECIAL_0_OPCODE_X0 = 35,
+ MULHL_US_SPECIAL_0_OPCODE_X0 = 36,
+ MULHL_UU_SPECIAL_0_OPCODE_X0 = 37,
+ MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38,
+ MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2,
+ MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39,
+ MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40,
+ MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3,
+ MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41,
+ MULLL_SS_SPECIAL_0_OPCODE_X0 = 42,
+ MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2,
+ MULLL_SU_SPECIAL_0_OPCODE_X0 = 43,
+ MULLL_UU_SPECIAL_0_OPCODE_X0 = 44,
+ MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3,
+ MVNZ_SPECIAL_0_OPCODE_X0 = 45,
+ MVNZ_SPECIAL_1_OPCODE_Y0 = 1,
+ MVZ_SPECIAL_0_OPCODE_X0 = 46,
+ MVZ_SPECIAL_1_OPCODE_Y0 = 2,
+ MZB_SPECIAL_0_OPCODE_X0 = 47,
+ MZB_SPECIAL_0_OPCODE_X1 = 21,
+ MZH_SPECIAL_0_OPCODE_X0 = 48,
+ MZH_SPECIAL_0_OPCODE_X1 = 22,
+ MZ_SPECIAL_0_OPCODE_X0 = 49,
+ MZ_SPECIAL_0_OPCODE_X1 = 23,
+ MZ_SPECIAL_1_OPCODE_Y0 = 3,
+ MZ_SPECIAL_1_OPCODE_Y1 = 2,
+ NAP_UN_0_SHUN_0_OPCODE_X1 = 16,
+ NOP_NOREG_RR_IMM_0_OPCODE_SN = 2,
+ NOP_UN_0_SHUN_0_OPCODE_X0 = 6,
+ NOP_UN_0_SHUN_0_OPCODE_X1 = 17,
+ NOP_UN_0_SHUN_0_OPCODE_Y0 = 6,
+ NOP_UN_0_SHUN_0_OPCODE_Y1 = 3,
+ NOREG_RR_IMM_0_OPCODE_SN = 0,
+ NOR_SPECIAL_0_OPCODE_X0 = 50,
+ NOR_SPECIAL_0_OPCODE_X1 = 24,
+ NOR_SPECIAL_2_OPCODE_Y0 = 1,
+ NOR_SPECIAL_2_OPCODE_Y1 = 1,
+ ORI_IMM_0_OPCODE_X0 = 8,
+ ORI_IMM_0_OPCODE_X1 = 11,
+ ORI_OPCODE_Y0 = 11,
+ ORI_OPCODE_Y1 = 9,
+ OR_SPECIAL_0_OPCODE_X0 = 51,
+ OR_SPECIAL_0_OPCODE_X1 = 25,
+ OR_SPECIAL_2_OPCODE_Y0 = 2,
+ OR_SPECIAL_2_OPCODE_Y1 = 2,
+ PACKBS_U_SPECIAL_0_OPCODE_X0 = 103,
+ PACKBS_U_SPECIAL_0_OPCODE_X1 = 73,
+ PACKHB_SPECIAL_0_OPCODE_X0 = 52,
+ PACKHB_SPECIAL_0_OPCODE_X1 = 26,
+ PACKHS_SPECIAL_0_OPCODE_X0 = 102,
+ PACKHS_SPECIAL_0_OPCODE_X1 = 72,
+ PACKLB_SPECIAL_0_OPCODE_X0 = 53,
+ PACKLB_SPECIAL_0_OPCODE_X1 = 27,
+ PCNT_UN_0_SHUN_0_OPCODE_X0 = 7,
+ PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7,
+ RLI_SHUN_0_OPCODE_X0 = 1,
+ RLI_SHUN_0_OPCODE_X1 = 1,
+ RLI_SHUN_0_OPCODE_Y0 = 1,
+ RLI_SHUN_0_OPCODE_Y1 = 1,
+ RL_SPECIAL_0_OPCODE_X0 = 54,
+ RL_SPECIAL_0_OPCODE_X1 = 28,
+ RL_SPECIAL_3_OPCODE_Y0 = 0,
+ RL_SPECIAL_3_OPCODE_Y1 = 0,
+ RR_IMM_0_OPCODE_SN = 0,
+ S1A_SPECIAL_0_OPCODE_X0 = 55,
+ S1A_SPECIAL_0_OPCODE_X1 = 29,
+ S1A_SPECIAL_0_OPCODE_Y0 = 1,
+ S1A_SPECIAL_0_OPCODE_Y1 = 1,
+ S2A_SPECIAL_0_OPCODE_X0 = 56,
+ S2A_SPECIAL_0_OPCODE_X1 = 30,
+ S2A_SPECIAL_0_OPCODE_Y0 = 2,
+ S2A_SPECIAL_0_OPCODE_Y1 = 2,
+ S3A_SPECIAL_0_OPCODE_X0 = 57,
+ S3A_SPECIAL_0_OPCODE_X1 = 31,
+ S3A_SPECIAL_5_OPCODE_Y0 = 1,
+ S3A_SPECIAL_5_OPCODE_Y1 = 1,
+ SADAB_U_SPECIAL_0_OPCODE_X0 = 58,
+ SADAH_SPECIAL_0_OPCODE_X0 = 59,
+ SADAH_U_SPECIAL_0_OPCODE_X0 = 60,
+ SADB_U_SPECIAL_0_OPCODE_X0 = 61,
+ SADH_SPECIAL_0_OPCODE_X0 = 62,
+ SADH_U_SPECIAL_0_OPCODE_X0 = 63,
+ SBADD_IMM_0_OPCODE_X1 = 28,
+ SB_OPCODE_Y2 = 5,
+ SB_SPECIAL_0_OPCODE_X1 = 32,
+ SEQB_SPECIAL_0_OPCODE_X0 = 64,
+ SEQB_SPECIAL_0_OPCODE_X1 = 33,
+ SEQH_SPECIAL_0_OPCODE_X0 = 65,
+ SEQH_SPECIAL_0_OPCODE_X1 = 34,
+ SEQIB_IMM_0_OPCODE_X0 = 9,
+ SEQIB_IMM_0_OPCODE_X1 = 12,
+ SEQIH_IMM_0_OPCODE_X0 = 10,
+ SEQIH_IMM_0_OPCODE_X1 = 13,
+ SEQI_IMM_0_OPCODE_X0 = 11,
+ SEQI_IMM_0_OPCODE_X1 = 14,
+ SEQI_OPCODE_Y0 = 12,
+ SEQI_OPCODE_Y1 = 10,
+ SEQ_SPECIAL_0_OPCODE_X0 = 66,
+ SEQ_SPECIAL_0_OPCODE_X1 = 35,
+ SEQ_SPECIAL_5_OPCODE_Y0 = 2,
+ SEQ_SPECIAL_5_OPCODE_Y1 = 2,
+ SHADD_IMM_0_OPCODE_X1 = 29,
+ SHL8II_IMM_0_OPCODE_SN = 3,
+ SHLB_SPECIAL_0_OPCODE_X0 = 67,
+ SHLB_SPECIAL_0_OPCODE_X1 = 36,
+ SHLH_SPECIAL_0_OPCODE_X0 = 68,
+ SHLH_SPECIAL_0_OPCODE_X1 = 37,
+ SHLIB_SHUN_0_OPCODE_X0 = 2,
+ SHLIB_SHUN_0_OPCODE_X1 = 2,
+ SHLIH_SHUN_0_OPCODE_X0 = 3,
+ SHLIH_SHUN_0_OPCODE_X1 = 3,
+ SHLI_SHUN_0_OPCODE_X0 = 4,
+ SHLI_SHUN_0_OPCODE_X1 = 4,
+ SHLI_SHUN_0_OPCODE_Y0 = 2,
+ SHLI_SHUN_0_OPCODE_Y1 = 2,
+ SHL_SPECIAL_0_OPCODE_X0 = 69,
+ SHL_SPECIAL_0_OPCODE_X1 = 38,
+ SHL_SPECIAL_3_OPCODE_Y0 = 1,
+ SHL_SPECIAL_3_OPCODE_Y1 = 1,
+ SHR1_RR_IMM_0_OPCODE_SN = 9,
+ SHRB_SPECIAL_0_OPCODE_X0 = 70,
+ SHRB_SPECIAL_0_OPCODE_X1 = 39,
+ SHRH_SPECIAL_0_OPCODE_X0 = 71,
+ SHRH_SPECIAL_0_OPCODE_X1 = 40,
+ SHRIB_SHUN_0_OPCODE_X0 = 5,
+ SHRIB_SHUN_0_OPCODE_X1 = 5,
+ SHRIH_SHUN_0_OPCODE_X0 = 6,
+ SHRIH_SHUN_0_OPCODE_X1 = 6,
+ SHRI_SHUN_0_OPCODE_X0 = 7,
+ SHRI_SHUN_0_OPCODE_X1 = 7,
+ SHRI_SHUN_0_OPCODE_Y0 = 3,
+ SHRI_SHUN_0_OPCODE_Y1 = 3,
+ SHR_SPECIAL_0_OPCODE_X0 = 72,
+ SHR_SPECIAL_0_OPCODE_X1 = 41,
+ SHR_SPECIAL_3_OPCODE_Y0 = 2,
+ SHR_SPECIAL_3_OPCODE_Y1 = 2,
+ SHUN_0_OPCODE_X0 = 7,
+ SHUN_0_OPCODE_X1 = 8,
+ SHUN_0_OPCODE_Y0 = 13,
+ SHUN_0_OPCODE_Y1 = 11,
+ SH_OPCODE_Y2 = 6,
+ SH_SPECIAL_0_OPCODE_X1 = 42,
+ SLTB_SPECIAL_0_OPCODE_X0 = 73,
+ SLTB_SPECIAL_0_OPCODE_X1 = 43,
+ SLTB_U_SPECIAL_0_OPCODE_X0 = 74,
+ SLTB_U_SPECIAL_0_OPCODE_X1 = 44,
+ SLTEB_SPECIAL_0_OPCODE_X0 = 75,
+ SLTEB_SPECIAL_0_OPCODE_X1 = 45,
+ SLTEB_U_SPECIAL_0_OPCODE_X0 = 76,
+ SLTEB_U_SPECIAL_0_OPCODE_X1 = 46,
+ SLTEH_SPECIAL_0_OPCODE_X0 = 77,
+ SLTEH_SPECIAL_0_OPCODE_X1 = 47,
+ SLTEH_U_SPECIAL_0_OPCODE_X0 = 78,
+ SLTEH_U_SPECIAL_0_OPCODE_X1 = 48,
+ SLTE_SPECIAL_0_OPCODE_X0 = 79,
+ SLTE_SPECIAL_0_OPCODE_X1 = 49,
+ SLTE_SPECIAL_4_OPCODE_Y0 = 0,
+ SLTE_SPECIAL_4_OPCODE_Y1 = 0,
+ SLTE_U_SPECIAL_0_OPCODE_X0 = 80,
+ SLTE_U_SPECIAL_0_OPCODE_X1 = 50,
+ SLTE_U_SPECIAL_4_OPCODE_Y0 = 1,
+ SLTE_U_SPECIAL_4_OPCODE_Y1 = 1,
+ SLTH_SPECIAL_0_OPCODE_X0 = 81,
+ SLTH_SPECIAL_0_OPCODE_X1 = 51,
+ SLTH_U_SPECIAL_0_OPCODE_X0 = 82,
+ SLTH_U_SPECIAL_0_OPCODE_X1 = 52,
+ SLTIB_IMM_0_OPCODE_X0 = 12,
+ SLTIB_IMM_0_OPCODE_X1 = 15,
+ SLTIB_U_IMM_0_OPCODE_X0 = 13,
+ SLTIB_U_IMM_0_OPCODE_X1 = 16,
+ SLTIH_IMM_0_OPCODE_X0 = 14,
+ SLTIH_IMM_0_OPCODE_X1 = 17,
+ SLTIH_U_IMM_0_OPCODE_X0 = 15,
+ SLTIH_U_IMM_0_OPCODE_X1 = 18,
+ SLTI_IMM_0_OPCODE_X0 = 16,
+ SLTI_IMM_0_OPCODE_X1 = 19,
+ SLTI_OPCODE_Y0 = 14,
+ SLTI_OPCODE_Y1 = 12,
+ SLTI_U_IMM_0_OPCODE_X0 = 17,
+ SLTI_U_IMM_0_OPCODE_X1 = 20,
+ SLTI_U_OPCODE_Y0 = 15,
+ SLTI_U_OPCODE_Y1 = 13,
+ SLT_SPECIAL_0_OPCODE_X0 = 83,
+ SLT_SPECIAL_0_OPCODE_X1 = 53,
+ SLT_SPECIAL_4_OPCODE_Y0 = 2,
+ SLT_SPECIAL_4_OPCODE_Y1 = 2,
+ SLT_U_SPECIAL_0_OPCODE_X0 = 84,
+ SLT_U_SPECIAL_0_OPCODE_X1 = 54,
+ SLT_U_SPECIAL_4_OPCODE_Y0 = 3,
+ SLT_U_SPECIAL_4_OPCODE_Y1 = 3,
+ SNEB_SPECIAL_0_OPCODE_X0 = 85,
+ SNEB_SPECIAL_0_OPCODE_X1 = 55,
+ SNEH_SPECIAL_0_OPCODE_X0 = 86,
+ SNEH_SPECIAL_0_OPCODE_X1 = 56,
+ SNE_SPECIAL_0_OPCODE_X0 = 87,
+ SNE_SPECIAL_0_OPCODE_X1 = 57,
+ SNE_SPECIAL_5_OPCODE_Y0 = 3,
+ SNE_SPECIAL_5_OPCODE_Y1 = 3,
+ SPECIAL_0_OPCODE_X0 = 0,
+ SPECIAL_0_OPCODE_X1 = 1,
+ SPECIAL_0_OPCODE_Y0 = 1,
+ SPECIAL_0_OPCODE_Y1 = 1,
+ SPECIAL_1_OPCODE_Y0 = 2,
+ SPECIAL_1_OPCODE_Y1 = 2,
+ SPECIAL_2_OPCODE_Y0 = 3,
+ SPECIAL_2_OPCODE_Y1 = 3,
+ SPECIAL_3_OPCODE_Y0 = 4,
+ SPECIAL_3_OPCODE_Y1 = 4,
+ SPECIAL_4_OPCODE_Y0 = 5,
+ SPECIAL_4_OPCODE_Y1 = 5,
+ SPECIAL_5_OPCODE_Y0 = 6,
+ SPECIAL_5_OPCODE_Y1 = 6,
+ SPECIAL_6_OPCODE_Y0 = 7,
+ SPECIAL_7_OPCODE_Y0 = 8,
+ SRAB_SPECIAL_0_OPCODE_X0 = 88,
+ SRAB_SPECIAL_0_OPCODE_X1 = 58,
+ SRAH_SPECIAL_0_OPCODE_X0 = 89,
+ SRAH_SPECIAL_0_OPCODE_X1 = 59,
+ SRAIB_SHUN_0_OPCODE_X0 = 8,
+ SRAIB_SHUN_0_OPCODE_X1 = 8,
+ SRAIH_SHUN_0_OPCODE_X0 = 9,
+ SRAIH_SHUN_0_OPCODE_X1 = 9,
+ SRAI_SHUN_0_OPCODE_X0 = 10,
+ SRAI_SHUN_0_OPCODE_X1 = 10,
+ SRAI_SHUN_0_OPCODE_Y0 = 4,
+ SRAI_SHUN_0_OPCODE_Y1 = 4,
+ SRA_SPECIAL_0_OPCODE_X0 = 90,
+ SRA_SPECIAL_0_OPCODE_X1 = 60,
+ SRA_SPECIAL_3_OPCODE_Y0 = 3,
+ SRA_SPECIAL_3_OPCODE_Y1 = 3,
+ SUBBS_U_SPECIAL_0_OPCODE_X0 = 100,
+ SUBBS_U_SPECIAL_0_OPCODE_X1 = 70,
+ SUBB_SPECIAL_0_OPCODE_X0 = 91,
+ SUBB_SPECIAL_0_OPCODE_X1 = 61,
+ SUBHS_SPECIAL_0_OPCODE_X0 = 101,
+ SUBHS_SPECIAL_0_OPCODE_X1 = 71,
+ SUBH_SPECIAL_0_OPCODE_X0 = 92,
+ SUBH_SPECIAL_0_OPCODE_X1 = 62,
+ SUBS_SPECIAL_0_OPCODE_X0 = 97,
+ SUBS_SPECIAL_0_OPCODE_X1 = 67,
+ SUB_SPECIAL_0_OPCODE_X0 = 93,
+ SUB_SPECIAL_0_OPCODE_X1 = 63,
+ SUB_SPECIAL_0_OPCODE_Y0 = 3,
+ SUB_SPECIAL_0_OPCODE_Y1 = 3,
+ SWADD_IMM_0_OPCODE_X1 = 30,
+ SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18,
+ SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19,
+ SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20,
+ SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21,
+ SW_OPCODE_Y2 = 7,
+ SW_SPECIAL_0_OPCODE_X1 = 64,
+ TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8,
+ TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8,
+ TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9,
+ TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9,
+ TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10,
+ TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10,
+ TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11,
+ TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11,
+ TNS_UN_0_SHUN_0_OPCODE_X1 = 22,
+ UN_0_SHUN_0_OPCODE_X0 = 11,
+ UN_0_SHUN_0_OPCODE_X1 = 11,
+ UN_0_SHUN_0_OPCODE_Y0 = 5,
+ UN_0_SHUN_0_OPCODE_Y1 = 5,
+ WH64_UN_0_SHUN_0_OPCODE_X1 = 23,
+ XORI_IMM_0_OPCODE_X0 = 2,
+ XORI_IMM_0_OPCODE_X1 = 21,
+ XOR_SPECIAL_0_OPCODE_X0 = 94,
+ XOR_SPECIAL_0_OPCODE_X1 = 65,
+ XOR_SPECIAL_2_OPCODE_Y0 = 3,
+ XOR_SPECIAL_2_OPCODE_Y1 = 3
+};
+
+#endif /* !_TILE_OPCODE_CONSTANTS_H */
diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h
new file mode 100644
index 000000000000..c8301c43d6d9
--- /dev/null
+++ b/arch/tile/include/asm/page.h
@@ -0,0 +1,334 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PAGE_H
+#define _ASM_TILE_PAGE_H
+
+#include <linux/const.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+/* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */
+#define PAGE_SHIFT 16
+#define HPAGE_SHIFT 24
+
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define HPAGE_SIZE (_AC(1, UL) << HPAGE_SHIFT)
+
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+#define HPAGE_MASK (~(HPAGE_SIZE - 1))
+
+/*
+ * The {,H}PAGE_SHIFT values must match the HV_LOG2_PAGE_SIZE_xxx
+ * definitions in <hv/hypervisor.h>. We validate this at build time
+ * here, and again at runtime during early boot. We provide a
+ * separate definition since userspace doesn't have <hv/hypervisor.h>.
+ *
+ * Be careful to distinguish PAGE_SHIFT from HV_PTE_INDEX_PFN, since
+ * they are the same on i386 but not TILE.
+ */
+#if HV_LOG2_PAGE_SIZE_SMALL != PAGE_SHIFT
+# error Small page size mismatch in Linux
+#endif
+#if HV_LOG2_PAGE_SIZE_LARGE != HPAGE_SHIFT
+# error Huge page size mismatch in Linux
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+struct page;
+
+static inline void clear_page(void *page)
+{
+ memset(page, 0, PAGE_SIZE);
+}
+
+static inline void copy_page(void *to, void *from)
+{
+ memcpy(to, from, PAGE_SIZE);
+}
+
+static inline void clear_user_page(void *page, unsigned long vaddr,
+ struct page *pg)
+{
+ clear_page(page);
+}
+
+static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
+ struct page *topage)
+{
+ copy_page(to, from);
+}
+
+/*
+ * Hypervisor page tables are made of the same basic structure.
+ */
+
+typedef __u64 pteval_t;
+typedef __u64 pmdval_t;
+typedef __u64 pudval_t;
+typedef __u64 pgdval_t;
+typedef __u64 pgprotval_t;
+
+typedef HV_PTE pte_t;
+typedef HV_PTE pgd_t;
+typedef HV_PTE pgprot_t;
+
+/*
+ * User L2 page tables are managed as one L2 page table per page,
+ * because we use the page allocator for them. This keeps the allocation
+ * simple and makes it potentially useful to implement HIGHPTE at some point.
+ * However, it's also inefficient, since L2 page tables are much smaller
+ * than pages (currently 2KB vs 64KB). So we should revisit this.
+ */
+typedef struct page *pgtable_t;
+
+/* Must be a macro since it is used to create constants. */
+#define __pgprot(val) hv_pte(val)
+
+static inline u64 pgprot_val(pgprot_t pgprot)
+{
+ return hv_pte_val(pgprot);
+}
+
+static inline u64 pte_val(pte_t pte)
+{
+ return hv_pte_val(pte);
+}
+
+static inline u64 pgd_val(pgd_t pgd)
+{
+ return hv_pte_val(pgd);
+}
+
+#ifdef __tilegx__
+
+typedef HV_PTE pmd_t;
+
+static inline u64 pmd_val(pmd_t pmd)
+{
+ return hv_pte_val(pmd);
+}
+
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT - PAGE_SHIFT)
+
+#define HUGE_MAX_HSTATE 2
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+/* Each memory controller has PAs distinct in their high bits. */
+#define NR_PA_HIGHBIT_SHIFT (CHIP_PA_WIDTH() - CHIP_LOG_NUM_MSHIMS())
+#define NR_PA_HIGHBIT_VALUES (1 << CHIP_LOG_NUM_MSHIMS())
+#define __pa_to_highbits(pa) ((phys_addr_t)(pa) >> NR_PA_HIGHBIT_SHIFT)
+#define __pfn_to_highbits(pfn) ((pfn) >> (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT))
+
+#ifdef __tilegx__
+
+/*
+ * We reserve the lower half of memory for user-space programs, and the
+ * upper half for system code. We re-map all of physical memory in the
+ * upper half, which takes a quarter of our VA space. Then we have
+ * the vmalloc regions. The supervisor code lives at 0xfffffff700000000,
+ * with the hypervisor above that.
+ *
+ * Loadable kernel modules are placed immediately after the static
+ * supervisor code, with each being allocated a 256MB region of
+ * address space, so we don't have to worry about the range of "jal"
+ * and other branch instructions.
+ *
+ * For now we keep life simple and just allocate one pmd (4GB) for vmalloc.
+ * Similarly, for now we don't play any struct page mapping games.
+ */
+
+#if CHIP_PA_WIDTH() + 2 > CHIP_VA_WIDTH()
+# error Too much PA to map with the VA available!
+#endif
+#define HALF_VA_SPACE (_AC(1, UL) << (CHIP_VA_WIDTH() - 1))
+
+#define MEM_LOW_END (HALF_VA_SPACE - 1) /* low half */
+#define MEM_HIGH_START (-HALF_VA_SPACE) /* high half */
+#define PAGE_OFFSET MEM_HIGH_START
+#define _VMALLOC_START _AC(0xfffffff500000000, UL) /* 4 GB */
+#define HUGE_VMAP_BASE _AC(0xfffffff600000000, UL) /* 4 GB */
+#define MEM_SV_START _AC(0xfffffff700000000, UL) /* 256 MB */
+#define MEM_SV_INTRPT MEM_SV_START
+#define MEM_MODULE_START _AC(0xfffffff710000000, UL) /* 256 MB */
+#define MEM_MODULE_END (MEM_MODULE_START + (256*1024*1024))
+#define MEM_HV_START _AC(0xfffffff800000000, UL) /* 32 GB */
+
+/* Highest DTLB address we will use */
+#define KERNEL_HIGH_VADDR MEM_SV_START
+
+/* Since we don't currently provide any fixmaps, we use an impossible VA. */
+#define FIXADDR_TOP MEM_HV_START
+
+#else /* !__tilegx__ */
+
+/*
+ * A PAGE_OFFSET of 0xC0000000 means that the kernel has
+ * a virtual address space of one gigabyte, which limits the
+ * amount of physical memory you can use to about 768MB.
+ * If you want more physical memory than this then see the CONFIG_HIGHMEM
+ * option in the kernel configuration.
+ *
+ * The top two 16MB chunks in the table below (VIRT and HV) are
+ * unavailable to Linux. Since the kernel interrupt vectors must live
+ * at 0xfd000000, we map all of the bottom of RAM at this address with
+ * a huge page table entry to minimize its ITLB footprint (as well as
+ * at PAGE_OFFSET). The last architected requirement is that user
+ * interrupt vectors live at 0xfc000000, so we make that range of
+ * memory available to user processes. The remaining regions are sized
+ * as shown; after the first four addresses, we show "typical" values,
+ * since the actual addresses depend on kernel #defines.
+ *
+ * MEM_VIRT_INTRPT 0xff000000
+ * MEM_HV_INTRPT 0xfe000000
+ * MEM_SV_INTRPT (kernel code) 0xfd000000
+ * MEM_USER_INTRPT (user vector) 0xfc000000
+ * FIX_KMAP_xxx 0xf8000000 (via NR_CPUS * KM_TYPE_NR)
+ * PKMAP_BASE 0xf7000000 (via LAST_PKMAP)
+ * HUGE_VMAP 0xf3000000 (via CONFIG_NR_HUGE_VMAPS)
+ * VMALLOC_START 0xf0000000 (via __VMALLOC_RESERVE)
+ * mapped LOWMEM 0xc0000000
+ */
+
+#define MEM_USER_INTRPT _AC(0xfc000000, UL)
+#define MEM_SV_INTRPT _AC(0xfd000000, UL)
+#define MEM_HV_INTRPT _AC(0xfe000000, UL)
+#define MEM_VIRT_INTRPT _AC(0xff000000, UL)
+
+#define INTRPT_SIZE 0x4000
+
+/* Tolerate page size larger than the architecture interrupt region size. */
+#if PAGE_SIZE > INTRPT_SIZE
+#undef INTRPT_SIZE
+#define INTRPT_SIZE PAGE_SIZE
+#endif
+
+#define KERNEL_HIGH_VADDR MEM_USER_INTRPT
+#define FIXADDR_TOP (KERNEL_HIGH_VADDR - PAGE_SIZE)
+
+#define PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL)
+
+/* On 32-bit architectures we mix kernel modules in with other vmaps. */
+#define MEM_MODULE_START VMALLOC_START
+#define MEM_MODULE_END VMALLOC_END
+
+#endif /* __tilegx__ */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_HIGHMEM
+
+/* Map kernel virtual addresses to page frames, in HPAGE_SIZE chunks. */
+extern unsigned long pbase_map[];
+extern void *vbase_map[];
+
+static inline unsigned long kaddr_to_pfn(const volatile void *_kaddr)
+{
+ unsigned long kaddr = (unsigned long)_kaddr;
+ return pbase_map[kaddr >> HPAGE_SHIFT] +
+ ((kaddr & (HPAGE_SIZE - 1)) >> PAGE_SHIFT);
+}
+
+static inline void *pfn_to_kaddr(unsigned long pfn)
+{
+ return vbase_map[__pfn_to_highbits(pfn)] + (pfn << PAGE_SHIFT);
+}
+
+static inline phys_addr_t virt_to_phys(const volatile void *kaddr)
+{
+ unsigned long pfn = kaddr_to_pfn(kaddr);
+ return ((phys_addr_t)pfn << PAGE_SHIFT) +
+ ((unsigned long)kaddr & (PAGE_SIZE-1));
+}
+
+static inline void *phys_to_virt(phys_addr_t paddr)
+{
+ return pfn_to_kaddr(paddr >> PAGE_SHIFT) + (paddr & (PAGE_SIZE-1));
+}
+
+/* With HIGHMEM, we pack PAGE_OFFSET through high_memory with all valid VAs. */
+static inline int virt_addr_valid(const volatile void *kaddr)
+{
+ extern void *high_memory; /* copied from <linux/mm.h> */
+ return ((unsigned long)kaddr >= PAGE_OFFSET && kaddr < high_memory);
+}
+
+#else /* !CONFIG_HIGHMEM */
+
+static inline unsigned long kaddr_to_pfn(const volatile void *kaddr)
+{
+ return ((unsigned long)kaddr - PAGE_OFFSET) >> PAGE_SHIFT;
+}
+
+static inline void *pfn_to_kaddr(unsigned long pfn)
+{
+ return (void *)((pfn << PAGE_SHIFT) + PAGE_OFFSET);
+}
+
+static inline phys_addr_t virt_to_phys(const volatile void *kaddr)
+{
+ return (phys_addr_t)((unsigned long)kaddr - PAGE_OFFSET);
+}
+
+static inline void *phys_to_virt(phys_addr_t paddr)
+{
+ return (void *)((unsigned long)paddr + PAGE_OFFSET);
+}
+
+/* Check that the given address is within some mapped range of PAs. */
+#define virt_addr_valid(kaddr) pfn_valid(kaddr_to_pfn(kaddr))
+
+#endif /* !CONFIG_HIGHMEM */
+
+/* All callers are not consistent in how they call these functions. */
+#define __pa(kaddr) virt_to_phys((void *)(unsigned long)(kaddr))
+#define __va(paddr) phys_to_virt((phys_addr_t)(paddr))
+
+extern int devmem_is_allowed(unsigned long pagenr);
+
+#ifdef CONFIG_FLATMEM
+static inline int pfn_valid(unsigned long pfn)
+{
+ return pfn < max_mapnr;
+}
+#endif
+
+/* Provide as macros since these require some other headers included. */
+#define page_to_pa(page) ((phys_addr_t)(page_to_pfn(page)) << PAGE_SHIFT)
+#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn(kaddr))
+#define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page))
+
+struct mm_struct;
+extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr);
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS \
+ (VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_TILE_PAGE_H */
diff --git a/arch/tile/include/asm/param.h b/arch/tile/include/asm/param.h
new file mode 100644
index 000000000000..965d45427975
--- /dev/null
+++ b/arch/tile/include/asm/param.h
@@ -0,0 +1 @@
+#include <asm-generic/param.h>
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
new file mode 100644
index 000000000000..e853b0e2793b
--- /dev/null
+++ b/arch/tile/include/asm/pci-bridge.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PCI_BRIDGE_H
+#define _ASM_TILE_PCI_BRIDGE_H
+
+#include <linux/ioport.h>
+#include <linux/pci.h>
+
+struct device_node;
+struct pci_controller;
+
+/*
+ * pci_io_base returns the memory address at which you can access
+ * the I/O space for PCI bus number `bus' (or NULL on error).
+ */
+extern void __iomem *pci_bus_io_base(unsigned int bus);
+extern unsigned long pci_bus_io_base_phys(unsigned int bus);
+extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
+
+/* Allocate a new PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(void);
+
+/* Helper function for setting up resources */
+extern void pci_init_resource(struct resource *res, unsigned long start,
+ unsigned long end, int flags, char *name);
+
+/* Get the PCI host controller for a bus */
+extern struct pci_controller *pci_bus_to_hose(int bus);
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ int index; /* PCI domain number */
+ struct pci_bus *root_bus;
+
+ int first_busno;
+ int last_busno;
+
+ int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
+ int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
+
+ struct pci_ops *ops;
+
+ int irq_base; /* Base IRQ from the Hypervisor */
+ int plx_gen1; /* flag for PLX Gen 1 configuration */
+
+ /* Address ranges that are routed to this controller/bridge. */
+ struct resource mem_resources[3];
+};
+
+static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
+{
+ return bus->sysdata;
+}
+
+extern void setup_indirect_pci_nomap(struct pci_controller *hose,
+ void __iomem *cfg_addr, void __iomem *cfg_data);
+extern void setup_indirect_pci(struct pci_controller *hose,
+ u32 cfg_addr, u32 cfg_data);
+extern void setup_grackle(struct pci_controller *hose);
+
+extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
+
+/*
+ * The following code swizzles for exactly one bridge. The routine
+ * common_swizzle below handles multiple bridges. But there are a
+ * some boards that don't follow the PCI spec's suggestion so we
+ * break this piece out separately.
+ */
+static inline unsigned char bridge_swizzle(unsigned char pin,
+ unsigned char idsel)
+{
+ return (((pin-1) + idsel) % 4) + 1;
+}
+
+/*
+ * The following macro is used to lookup irqs in a standard table
+ * format for those PPC systems that do not already have PCI
+ * interrupts properly routed.
+ */
+/* FIXME - double check this */
+#define PCI_IRQ_TABLE_LOOKUP ({ \
+ long _ctl_ = -1; \
+ if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
+ _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
+ _ctl_; \
+})
+
+/*
+ * Scan the buses below a given PCI host bridge and assign suitable
+ * resources to all devices found.
+ */
+extern int pciauto_bus_scan(struct pci_controller *, int);
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ return (unsigned long)-1;
+}
+#endif
+
+#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
new file mode 100644
index 000000000000..b0c15da2d5d5
--- /dev/null
+++ b/arch/tile/include/asm/pci.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PCI_H
+#define _ASM_TILE_PCI_H
+
+#include <asm/pci-bridge.h>
+
+/*
+ * The hypervisor maps the entirety of CPA-space as bus addresses, so
+ * bus addresses are physical addresses. The networking and block
+ * device layers use this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS 1
+
+struct pci_controller *pci_bus_to_hose(int bus);
+unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
+int __init tile_pci_init(void);
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
+
+int __devinit _tile_cfg_read(struct pci_controller *hose,
+ int bus,
+ int slot,
+ int function,
+ int offset,
+ int size,
+ u32 *val);
+int __devinit _tile_cfg_write(struct pci_controller *hose,
+ int bus,
+ int slot,
+ int function,
+ int offset,
+ int size,
+ u32 val);
+
+/*
+ * These are used to to config reads and writes in the early stages of
+ * setup before the driver infrastructure has been set up enough to be
+ * able to do config reads and writes.
+ */
+#define early_cfg_read(where, size, value) \
+ _tile_cfg_read(controller, \
+ current_bus, \
+ pci_slot, \
+ pci_fn, \
+ where, \
+ size, \
+ value)
+
+#define early_cfg_write(where, size, value) \
+ _tile_cfg_write(controller, \
+ current_bus, \
+ pci_slot, \
+ pci_fn, \
+ where, \
+ size, \
+ value)
+
+
+
+#define PCICFG_BYTE 1
+#define PCICFG_WORD 2
+#define PCICFG_DWORD 4
+
+#define TILE_NUM_PCIE 2
+
+#define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index)
+
+/*
+ * This decides whether to display the domain number in /proc.
+ */
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+ return 1;
+}
+
+/*
+ * I/O space is currently not supported.
+ */
+
+#define TILE_PCIE_LOWER_IO 0x0
+#define TILE_PCIE_UPPER_IO 0x10000
+#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
+
+#define _PAGE_NO_CACHE 0
+#define _PAGE_GUARDED 0
+
+
+#define pcibios_assign_all_busses() pci_assign_all_buses
+extern int pci_assign_all_buses;
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+ /* No special bus mastering setup handling */
+}
+
+#define PCIBIOS_MIN_MEM 0
+#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+extern int blade_pci;
+
+/* implement the pci_ DMA API in terms of the generic device dma_ one */
+#include <asm-generic/pci-dma-compat.h>
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
+
+#endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h
new file mode 100644
index 000000000000..63294f5a8efb
--- /dev/null
+++ b/arch/tile/include/asm/percpu.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PERCPU_H
+#define _ASM_TILE_PERCPU_H
+
+register unsigned long __my_cpu_offset __asm__("tp");
+#define __my_cpu_offset __my_cpu_offset
+#define set_my_cpu_offset(tp) (__my_cpu_offset = (tp))
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_TILE_PERCPU_H */
diff --git a/arch/tile/include/asm/pgalloc.h b/arch/tile/include/asm/pgalloc.h
new file mode 100644
index 000000000000..cf52791a5501
--- /dev/null
+++ b/arch/tile/include/asm/pgalloc.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PGALLOC_H
+#define _ASM_TILE_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/mm.h>
+#include <linux/mmzone.h>
+#include <asm/fixmap.h>
+#include <hv/hypervisor.h>
+
+/* Bits for the size of the second-level page table. */
+#define L2_KERNEL_PGTABLE_SHIFT \
+ (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL + HV_LOG2_PTE_SIZE)
+
+/* We currently allocate user L2 page tables by page (unlike kernel L2s). */
+#if L2_KERNEL_PGTABLE_SHIFT < HV_LOG2_PAGE_SIZE_SMALL
+#define L2_USER_PGTABLE_SHIFT HV_LOG2_PAGE_SIZE_SMALL
+#else
+#define L2_USER_PGTABLE_SHIFT L2_KERNEL_PGTABLE_SHIFT
+#endif
+
+/* How many pages do we need, as an "order", for a user L2 page table? */
+#define L2_USER_PGTABLE_ORDER (L2_USER_PGTABLE_SHIFT - HV_LOG2_PAGE_SIZE_SMALL)
+
+/* How big is a kernel L2 page table? */
+#define L2_KERNEL_PGTABLE_SIZE (1 << L2_KERNEL_PGTABLE_SHIFT)
+
+static inline void set_pmd(pmd_t *pmdp, pmd_t pmd)
+{
+#ifdef CONFIG_64BIT
+ set_pte_order(pmdp, pmd, L2_USER_PGTABLE_ORDER);
+#else
+ set_pte_order(&pmdp->pud.pgd, pmd.pud.pgd, L2_USER_PGTABLE_ORDER);
+#endif
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+ pmd_t *pmd, pte_t *ptep)
+{
+ set_pmd(pmd, ptfn_pmd(__pa(ptep) >> HV_LOG2_PAGE_TABLE_ALIGN,
+ __pgprot(_PAGE_PRESENT)));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t page)
+{
+ set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(page_to_pfn(page)),
+ __pgprot(_PAGE_PRESENT)));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address);
+extern void pte_free(struct mm_struct *mm, struct page *pte);
+
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+ return pfn_to_kaddr(page_to_pfn(pte_alloc_one(mm, address)));
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
+ pte_free(mm, virt_to_page(pte));
+}
+
+extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address);
+
+#define check_pgt_cache() do { } while (0)
+
+/*
+ * Get the small-page pte_t lowmem entry for a given pfn.
+ * This may or may not be in use, depending on whether the initial
+ * huge-page entry for the page has already been shattered.
+ */
+pte_t *get_prealloc_pte(unsigned long pfn);
+
+/* During init, we can shatter kernel huge pages if needed. */
+void shatter_pmd(pmd_t *pmd);
+
+#ifdef __tilegx__
+/* We share a single page allocator for both L1 and L2 page tables. */
+#if HV_L1_SIZE != HV_L2_SIZE
+# error Rework assumption that L1 and L2 page tables are same size.
+#endif
+#define L1_USER_PGTABLE_ORDER L2_USER_PGTABLE_ORDER
+#define pud_populate(mm, pud, pmd) \
+ pmd_populate_kernel((mm), (pmd_t *)(pud), (pte_t *)(pmd))
+#define pmd_alloc_one(mm, addr) \
+ ((pmd_t *)page_to_virt(pte_alloc_one((mm), (addr))))
+#define pmd_free(mm, pmdp) \
+ pte_free((mm), virt_to_page(pmdp))
+#define __pmd_free_tlb(tlb, pmdp, address) \
+ __pte_free_tlb((tlb), virt_to_page(pmdp), (address))
+#endif
+
+#endif /* _ASM_TILE_PGALLOC_H */
diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h
new file mode 100644
index 000000000000..beb1504e9c10
--- /dev/null
+++ b/arch/tile/include/asm/pgtable.h
@@ -0,0 +1,475 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the TILE page table tree.
+ */
+
+#ifndef _ASM_TILE_PGTABLE_H
+#define _ASM_TILE_PGTABLE_H
+
+#include <hv/hypervisor.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/threads.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/processor.h>
+#include <asm/fixmap.h>
+#include <asm/system.h>
+
+struct mm_struct;
+struct vm_area_struct;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+extern pgprot_t swapper_pgprot;
+extern struct kmem_cache *pgd_cache;
+extern spinlock_t pgd_lock;
+extern struct list_head pgd_list;
+
+/*
+ * The very last slots in the pgd_t are for addresses unusable by Linux
+ * (pgd_addr_invalid() returns true). So we use them for the list structure.
+ * The x86 code we are modelled on uses the page->private/index fields
+ * (older 2.6 kernels) or the lru list (newer 2.6 kernels), but since
+ * our pgds are so much smaller than a page, it seems a waste to
+ * spend a whole page on each pgd.
+ */
+#define PGD_LIST_OFFSET \
+ ((PTRS_PER_PGD * sizeof(pgd_t)) - sizeof(struct list_head))
+#define pgd_to_list(pgd) \
+ ((struct list_head *)((char *)(pgd) + PGD_LIST_OFFSET))
+#define list_to_pgd(list) \
+ ((pgd_t *)((char *)(list) - PGD_LIST_OFFSET))
+
+extern void pgtable_cache_init(void);
+extern void paging_init(void);
+extern void set_page_homes(void);
+
+#define FIRST_USER_ADDRESS 0
+
+#define _PAGE_PRESENT HV_PTE_PRESENT
+#define _PAGE_HUGE_PAGE HV_PTE_PAGE
+#define _PAGE_READABLE HV_PTE_READABLE
+#define _PAGE_WRITABLE HV_PTE_WRITABLE
+#define _PAGE_EXECUTABLE HV_PTE_EXECUTABLE
+#define _PAGE_ACCESSED HV_PTE_ACCESSED
+#define _PAGE_DIRTY HV_PTE_DIRTY
+#define _PAGE_GLOBAL HV_PTE_GLOBAL
+#define _PAGE_USER HV_PTE_USER
+
+/*
+ * All the "standard" bits. Cache-control bits are managed elsewhere.
+ * This is used to test for valid level-2 page table pointers by checking
+ * all the bits, and to mask away the cache control bits for mprotect.
+ */
+#define _PAGE_ALL (\
+ _PAGE_PRESENT | \
+ _PAGE_HUGE_PAGE | \
+ _PAGE_READABLE | \
+ _PAGE_WRITABLE | \
+ _PAGE_EXECUTABLE | \
+ _PAGE_ACCESSED | \
+ _PAGE_DIRTY | \
+ _PAGE_GLOBAL | \
+ _PAGE_USER \
+)
+
+#define PAGE_NONE \
+ __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_SHARED \
+ __pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \
+ _PAGE_USER | _PAGE_ACCESSED)
+
+#define PAGE_SHARED_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_READABLE | _PAGE_WRITABLE | \
+ _PAGE_EXECUTABLE | _PAGE_USER | _PAGE_ACCESSED)
+#define PAGE_COPY_NOEXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE)
+#define PAGE_COPY_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \
+ _PAGE_READABLE | _PAGE_EXECUTABLE)
+#define PAGE_COPY \
+ PAGE_COPY_NOEXEC
+#define PAGE_READONLY \
+ __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_READABLE)
+#define PAGE_READONLY_EXEC \
+ __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | \
+ _PAGE_READABLE | _PAGE_EXECUTABLE)
+
+#define _PAGE_KERNEL_RO \
+ (_PAGE_PRESENT | _PAGE_GLOBAL | _PAGE_READABLE | _PAGE_ACCESSED)
+#define _PAGE_KERNEL \
+ (_PAGE_KERNEL_RO | _PAGE_WRITABLE | _PAGE_DIRTY)
+#define _PAGE_KERNEL_EXEC (_PAGE_KERNEL_RO | _PAGE_EXECUTABLE)
+
+#define PAGE_KERNEL __pgprot(_PAGE_KERNEL)
+#define PAGE_KERNEL_RO __pgprot(_PAGE_KERNEL_RO)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_KERNEL_EXEC)
+
+#define page_to_kpgprot(p) PAGE_KERNEL
+
+/*
+ * We could tighten these up, but for now writable or executable
+ * implies readable.
+ */
+#define __P000 PAGE_NONE
+#define __P001 PAGE_READONLY
+#define __P010 PAGE_COPY /* this is write-only, which we won't support */
+#define __P011 PAGE_COPY
+#define __P100 PAGE_READONLY_EXEC
+#define __P101 PAGE_READONLY_EXEC
+#define __P110 PAGE_COPY_EXEC
+#define __P111 PAGE_COPY_EXEC
+
+#define __S000 PAGE_NONE
+#define __S001 PAGE_READONLY
+#define __S010 PAGE_SHARED
+#define __S011 PAGE_SHARED
+#define __S100 PAGE_READONLY_EXEC
+#define __S101 PAGE_READONLY_EXEC
+#define __S110 PAGE_SHARED_EXEC
+#define __S111 PAGE_SHARED_EXEC
+
+/*
+ * All the normal _PAGE_ALL bits are ignored for PMDs, except PAGE_PRESENT
+ * and PAGE_HUGE_PAGE, which must be one and zero, respectively.
+ * We set the ignored bits to zero.
+ */
+#define _PAGE_TABLE _PAGE_PRESENT
+
+/* Inherit the caching flags from the old protection bits. */
+#define pgprot_modify(oldprot, newprot) \
+ (pgprot_t) { ((oldprot).val & ~_PAGE_ALL) | (newprot).val }
+
+/* Just setting the PFN to zero suffices. */
+#define pte_pgprot(x) hv_pte_set_pfn((x), 0)
+
+/*
+ * For PTEs and PDEs, we must clear the Present bit first when
+ * clearing a page table entry, so clear the bottom half first and
+ * enforce ordering with a barrier.
+ */
+static inline void __pte_clear(pte_t *ptep)
+{
+#ifdef __tilegx__
+ ptep->val = 0;
+#else
+ u32 *tmp = (u32 *)ptep;
+ tmp[0] = 0;
+ barrier();
+ tmp[1] = 0;
+#endif
+}
+#define pte_clear(mm, addr, ptep) __pte_clear(ptep)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present hv_pte_get_present
+#define pte_user hv_pte_get_user
+#define pte_read hv_pte_get_readable
+#define pte_dirty hv_pte_get_dirty
+#define pte_young hv_pte_get_accessed
+#define pte_write hv_pte_get_writable
+#define pte_exec hv_pte_get_executable
+#define pte_huge hv_pte_get_page
+#define pte_rdprotect hv_pte_clear_readable
+#define pte_exprotect hv_pte_clear_executable
+#define pte_mkclean hv_pte_clear_dirty
+#define pte_mkold hv_pte_clear_accessed
+#define pte_wrprotect hv_pte_clear_writable
+#define pte_mksmall hv_pte_clear_page
+#define pte_mkread hv_pte_set_readable
+#define pte_mkexec hv_pte_set_executable
+#define pte_mkdirty hv_pte_set_dirty
+#define pte_mkyoung hv_pte_set_accessed
+#define pte_mkwrite hv_pte_set_writable
+#define pte_mkhuge hv_pte_set_page
+
+#define pte_special(pte) 0
+#define pte_mkspecial(pte) (pte)
+
+/*
+ * Use some spare bits in the PTE for user-caching tags.
+ */
+#define pte_set_forcecache hv_pte_set_client0
+#define pte_get_forcecache hv_pte_get_client0
+#define pte_clear_forcecache hv_pte_clear_client0
+#define pte_set_anyhome hv_pte_set_client1
+#define pte_get_anyhome hv_pte_get_client1
+#define pte_clear_anyhome hv_pte_clear_client1
+
+/*
+ * A migrating PTE has PAGE_PRESENT clear but all the other bits preserved.
+ */
+#define pte_migrating hv_pte_get_migrating
+#define pte_mkmigrate(x) hv_pte_set_migrating(hv_pte_clear_present(x))
+#define pte_donemigrate(x) hv_pte_set_present(hv_pte_clear_migrating(x))
+
+#define pte_ERROR(e) \
+ printk("%s:%d: bad pte 0x%016llx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ printk("%s:%d: bad pgd 0x%016llx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * set_pte_order() sets the given PTE and also sanity-checks the
+ * requested PTE against the page homecaching. Unspecified parts
+ * of the PTE are filled in when it is written to memory, i.e. all
+ * caching attributes if "!forcecache", or the home cpu if "anyhome".
+ */
+extern void set_pte_order(pte_t *ptep, pte_t pte, int order);
+
+#define set_pte(ptep, pteval) set_pte_order(ptep, pteval, 0)
+#define set_pte_at(mm, addr, ptep, pteval) set_pte(ptep, pteval)
+#define set_pte_atomic(pteptr, pteval) set_pte(pteptr, pteval)
+
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline int pte_none(pte_t pte)
+{
+ return !pte.val;
+}
+
+static inline unsigned long pte_pfn(pte_t pte)
+{
+ return hv_pte_get_pfn(pte);
+}
+
+/* Set or get the remote cache cpu in a pgprot with remote caching. */
+extern pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu);
+extern int get_remote_cache_cpu(pgprot_t prot);
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+ return hv_pte_set_pfn(prot, pfn);
+}
+
+/* Support for priority mappings. */
+extern void start_mm_caching(struct mm_struct *mm);
+extern void check_mm_caching(struct mm_struct *prev, struct mm_struct *next);
+
+/*
+ * Support non-linear file mappings (see sys_remap_file_pages).
+ * This is defined by CLIENT1 set but CLIENT0 and _PAGE_PRESENT clear, and the
+ * file offset in the 32 high bits.
+ */
+#define _PAGE_FILE HV_PTE_CLIENT1
+#define PTE_FILE_MAX_BITS 32
+#define pte_file(pte) (hv_pte_get_client1(pte) && !hv_pte_get_client0(pte))
+#define pte_to_pgoff(pte) ((pte).val >> 32)
+#define pgoff_to_pte(off) ((pte_t) { (((long long)(off)) << 32) | _PAGE_FILE })
+
+/*
+ * Encode and de-code a swap entry (see <linux/swapops.h>).
+ * We put the swap file type+offset in the 32 high bits;
+ * I believe we can just leave the low bits clear.
+ */
+#define __swp_type(swp) ((swp).val & 0x1f)
+#define __swp_offset(swp) ((swp).val >> 5)
+#define __swp_entry(type, off) ((swp_entry_t) { (type) | ((off) << 5) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).val >> 32 })
+#define __swp_entry_to_pte(swp) ((pte_t) { (((long long) ((swp).val)) << 32) })
+
+/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ * dst - pointer to pgd range anwhere on a pgd page
+ * src - ""
+ * count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+ memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+/*
+ * If we are doing an mprotect(), just accept the new vma->vm_page_prot
+ * value and combine it with the PFN from the old PTE to get a new PTE.
+ */
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ return pfn_pte(hv_pte_get_pfn(pte), newprot);
+}
+
+/*
+ * The pgd page can be thought of an array like this: pgd_t[PTRS_PER_PGD]
+ *
+ * This macro returns the index of the entry in the pgd page which would
+ * control the given virtual address.
+ */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+
+/*
+ * pgd_offset() returns a (pgd_t *)
+ * pgd_index() is used get the offset into the pgd page's array of pgd_t's.
+ */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/*
+ * A shortcut which implies the use of the kernel's pgd, instead
+ * of a process's.
+ */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#if defined(CONFIG_HIGHPTE)
+extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type);
+#define pte_offset_map(dir, address) \
+ _pte_offset_map(dir, address, KM_PTE0)
+#define pte_offset_map_nested(dir, address) \
+ _pte_offset_map(dir, address, KM_PTE1)
+#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
+#else
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_map(dir, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+#endif
+
+/* Clear a non-executable kernel PTE and flush it from the TLB. */
+#define kpte_clear_flush(ptep, vaddr) \
+do { \
+ pte_clear(&init_mm, (vaddr), (ptep)); \
+ local_flush_tlb_page(FLUSH_NONEXEC, (vaddr), PAGE_SIZE); \
+} while (0)
+
+/*
+ * The kernel page tables contain what we need, and we flush when we
+ * change specific page table entries.
+ */
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+#ifdef CONFIG_FLATMEM
+#define kern_addr_valid(addr) (1)
+#endif /* CONFIG_FLATMEM */
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
+ remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+extern void vmalloc_sync_all(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef __tilegx__
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+static inline int pmd_none(pmd_t pmd)
+{
+ /*
+ * Only check low word on 32-bit platforms, since it might be
+ * out of sync with upper half.
+ */
+ return (unsigned long)pmd_val(pmd) == 0;
+}
+
+static inline int pmd_present(pmd_t pmd)
+{
+ return pmd_val(pmd) & _PAGE_PRESENT;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+ return ((pmd_val(pmd) & _PAGE_ALL) != _PAGE_TABLE);
+}
+
+static inline unsigned long pages_to_mb(unsigned long npg)
+{
+ return npg >> (20 - PAGE_SHIFT);
+}
+
+/*
+ * The pmd can be thought of an array like this: pmd_t[PTRS_PER_PMD]
+ *
+ * This function returns the index of the entry in the pmd which would
+ * control the given virtual address.
+ */
+static inline unsigned long pmd_index(unsigned long address)
+{
+ return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
+}
+
+/*
+ * A given kernel pmd_t maps to a specific virtual address (either a
+ * kernel huge page or a kernel pte_t table). Since kernel pte_t
+ * tables can be aligned at sub-page granularity, this function can
+ * return non-page-aligned pointers, despite its name.
+ */
+static inline unsigned long pmd_page_vaddr(pmd_t pmd)
+{
+ phys_addr_t pa =
+ (phys_addr_t)pmd_ptfn(pmd) << HV_LOG2_PAGE_TABLE_ALIGN;
+ return (unsigned long)__va(pa);
+}
+
+/*
+ * A pmd_t points to the base of a huge page or to a pte_t array.
+ * If a pte_t array, since we can have multiple per page, we don't
+ * have a one-to-one mapping of pmd_t's to pages. However, this is
+ * OK for pte_lockptr(), since we just end up with potentially one
+ * lock being used for several pte_t arrays.
+ */
+#define pmd_page(pmd) pfn_to_page(HV_PTFN_TO_PFN(pmd_ptfn(pmd)))
+
+/*
+ * The pte page can be thought of an array like this: pte_t[PTRS_PER_PTE]
+ *
+ * This macro returns the index of the entry in the pte page which would
+ * control the given virtual address.
+ */
+static inline unsigned long pte_index(unsigned long address)
+{
+ return (address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1);
+}
+
+static inline pte_t *pte_offset_kernel(pmd_t *pmd, unsigned long address)
+{
+ return (pte_t *)pmd_page_vaddr(*pmd) + pte_index(address);
+}
+
+static inline int pmd_huge_page(pmd_t pmd)
+{
+ return pmd_val(pmd) & _PAGE_HUGE_PAGE;
+}
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_PGTABLE_H */
diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..b935fb2ad4f3
--- /dev/null
+++ b/arch/tile/include/asm/pgtable_32.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _ASM_TILE_PGTABLE_32_H
+#define _ASM_TILE_PGTABLE_32_H
+
+/*
+ * The level-1 index is defined by the huge page size. A PGD is composed
+ * of PTRS_PER_PGD pgd_t's and is the top level of the page table.
+ */
+#define PGDIR_SHIFT HV_LOG2_PAGE_SIZE_LARGE
+#define PGDIR_SIZE HV_PAGE_SIZE_LARGE
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
+
+/*
+ * The level-2 index is defined by the difference between the huge
+ * page size and the normal page size. A PTE is composed of
+ * PTRS_PER_PTE pte_t's and is the bottom level of the page table.
+ * Note that the hypervisor docs use PTE for what we call pte_t, so
+ * this nomenclature is somewhat confusing.
+ */
+#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL))
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ *
+ * HOWEVER, if we are using an allocation scheme with slop after the
+ * end of the page table (e.g. where our L2 page tables are 2KB but
+ * our pages are 64KB and we are allocating via the page allocator)
+ * we can't extend it easily.
+ */
+#define LAST_PKMAP PTRS_PER_PTE
+
+#define PKMAP_BASE ((FIXADDR_BOOT_START - PAGE_SIZE*LAST_PKMAP) & PGDIR_MASK)
+
+#ifdef CONFIG_HIGHMEM
+# define __VMAPPING_END (PKMAP_BASE & ~(HPAGE_SIZE-1))
+#else
+# define __VMAPPING_END (FIXADDR_START & ~(HPAGE_SIZE-1))
+#endif
+
+#ifdef CONFIG_HUGEVMAP
+#define HUGE_VMAP_END __VMAPPING_END
+#define HUGE_VMAP_BASE (HUGE_VMAP_END - CONFIG_NR_HUGE_VMAPS * HPAGE_SIZE)
+#define _VMALLOC_END HUGE_VMAP_BASE
+#else
+#define _VMALLOC_END __VMAPPING_END
+#endif
+
+/*
+ * Align the vmalloc area to an L2 page table, and leave a guard page
+ * at the beginning and end. The vmalloc code also puts in an internal
+ * guard page between each allocation.
+ */
+#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE)
+extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */;
+#define _VMALLOC_START (_VMALLOC_END - VMALLOC_RESERVE)
+#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE)
+
+/* This is the maximum possible amount of lowmem. */
+#define MAXMEM (_VMALLOC_START - PAGE_OFFSET)
+
+/* We have no pmd or pud since we are strictly a two-level page table */
+#include <asm-generic/pgtable-nopmd.h>
+
+/* We don't define any pgds for these addresses. */
+static inline int pgd_addr_invalid(unsigned long addr)
+{
+ return addr >= MEM_HV_INTRPT;
+}
+
+/*
+ * Provide versions of these routines that can be used safely when
+ * the hypervisor may be asynchronously modifying dirty/accessed bits.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+
+extern int ptep_test_and_clear_young(struct vm_area_struct *,
+ unsigned long addr, pte_t *);
+extern void ptep_set_wrprotect(struct mm_struct *,
+ unsigned long addr, pte_t *);
+
+/* Create a pmd from a PTFN. */
+static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot)
+{
+ return (pmd_t){ { hv_pte_set_ptfn(prot, ptfn) } };
+}
+
+/* Return the page-table frame number (ptfn) that a pmd_t points at. */
+#define pmd_ptfn(pmd) hv_pte_get_ptfn((pmd).pud.pgd)
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ __pte_clear(&pmdp->pud.pgd);
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_TILE_PGTABLE_32_H */
diff --git a/arch/tile/include/asm/poll.h b/arch/tile/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/tile/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/tile/include/asm/posix_types.h b/arch/tile/include/asm/posix_types.h
new file mode 100644
index 000000000000..22cae6230ceb
--- /dev/null
+++ b/arch/tile/include/asm/posix_types.h
@@ -0,0 +1 @@
+#include <asm-generic/posix_types.h>
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
new file mode 100644
index 000000000000..96c50d2c4c2b
--- /dev/null
+++ b/arch/tile/include/asm/processor.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PROCESSOR_H
+#define _ASM_TILE_PROCESSOR_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one
+ * normally would, due to #include dependencies.
+ */
+#include <asm/ptrace.h>
+#include <asm/percpu.h>
+
+#include <arch/chip.h>
+#include <arch/spr_def.h>
+
+struct task_struct;
+struct thread_struct;
+struct list_head;
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+void *current_text_addr(void);
+
+#if CHIP_HAS_TILE_DMA()
+/* Capture the state of a suspended DMA. */
+struct tile_dma_state {
+ int enabled;
+ unsigned long src;
+ unsigned long dest;
+ unsigned long strides;
+ unsigned long chunk_size;
+ unsigned long src_chunk;
+ unsigned long dest_chunk;
+ unsigned long byte;
+ unsigned long status;
+};
+
+/*
+ * A mask of the DMA status register for selecting only the 'running'
+ * and 'done' bits.
+ */
+#define DMA_STATUS_MASK \
+ (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK)
+#endif
+
+/*
+ * Track asynchronous TLB events (faults and access violations)
+ * that occur while we are in kernel mode from DMA or the SN processor.
+ */
+struct async_tlb {
+ short fault_num; /* original fault number; 0 if none */
+ char is_fault; /* was it a fault (vs an access violation) */
+ char is_write; /* for fault: was it caused by a write? */
+ unsigned long address; /* what address faulted? */
+};
+
+
+struct thread_struct {
+ /* kernel stack pointer */
+ unsigned long ksp;
+ /* kernel PC */
+ unsigned long pc;
+ /* starting user stack pointer (for page migration) */
+ unsigned long usp0;
+ /* pid of process that created this one */
+ pid_t creator_pid;
+#if CHIP_HAS_TILE_DMA()
+ /* DMA info for suspended threads (byte == 0 means no DMA state) */
+ struct tile_dma_state tile_dma_state;
+#endif
+ /* User EX_CONTEXT registers */
+ unsigned long ex_context[2];
+ /* User SYSTEM_SAVE registers */
+ unsigned long system_save[4];
+ /* User interrupt mask */
+ unsigned long long interrupt_mask;
+ /* User interrupt-control 0 state */
+ unsigned long intctrl_0;
+#if CHIP_HAS_PROC_STATUS_SPR()
+ /* Any other miscellaneous processor state bits */
+ unsigned long proc_status;
+#endif
+#if CHIP_HAS_TILE_DMA()
+ /* Async DMA TLB fault information */
+ struct async_tlb dma_async_tlb;
+#endif
+#if CHIP_HAS_SN_PROC()
+ /* Was static network processor when we were switched out? */
+ int sn_proc_running;
+ /* Async SNI TLB fault information */
+ struct async_tlb sn_async_tlb;
+#endif
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Start with "sp" this many bytes below the top of the kernel stack.
+ * This preserves the invariant that a called function may write to *sp.
+ */
+#define STACK_TOP_DELTA 8
+
+/*
+ * When entering the kernel via a fault, start with the top of the
+ * pt_regs structure this many bytes below the top of the page.
+ * This aligns the pt_regs structure optimally for cache-line access.
+ */
+#ifdef __tilegx__
+#define KSTK_PTREGS_GAP 48
+#else
+#define KSTK_PTREGS_GAP 56
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __tilegx__
+#define TASK_SIZE_MAX (MEM_LOW_END + 1)
+#else
+#define TASK_SIZE_MAX PAGE_OFFSET
+#endif
+
+/* TASK_SIZE and related variables are always checked in "current" context. */
+#ifdef CONFIG_COMPAT
+#define COMPAT_TASK_SIZE (1UL << 31)
+#define TASK_SIZE ((current_thread_info()->status & TS_COMPAT) ?\
+ COMPAT_TASK_SIZE : TASK_SIZE_MAX)
+#else
+#define TASK_SIZE TASK_SIZE_MAX
+#endif
+
+/* We provide a minimal "vdso" a la x86; just the sigreturn code for now. */
+#define VDSO_BASE (TASK_SIZE - PAGE_SIZE)
+
+#define STACK_TOP VDSO_BASE
+
+/* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */
+#define STACK_TOP_MAX TASK_SIZE_MAX
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's, if it is using bottom-up mapping.
+ */
+#define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#define INIT_THREAD { \
+ .ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \
+ .interrupt_mask = -1ULL \
+}
+
+/* Kernel stack top for the task that first boots on this cpu. */
+DECLARE_PER_CPU(unsigned long, boot_sp);
+
+/* PC to boot from on this cpu. */
+DECLARE_PER_CPU(unsigned long, boot_pc);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs *regs,
+ unsigned long pc, unsigned long usp)
+{
+ regs->pc = pc;
+ regs->sp = usp;
+}
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+ /* Nothing for now */
+}
+
+/* Prepare to copy thread state - unlazy all lazy status. */
+#define prepare_to_copy(tsk) do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Helper routines for setting home cache modes at exec() time. */
+
+
+/*
+ * Return saved (kernel) PC of a blocked thread.
+ * Only used in a printk() in kernel/sched.c, so don't work too hard.
+ */
+#define thread_saved_pc(t) ((t)->thread.pc)
+
+unsigned long get_wchan(struct task_struct *p);
+
+/* Return initial ksp value for given task. */
+#define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE)
+
+/* Return some info about the user process TASK. */
+#define KSTK_TOP(task) (task_ksp0(task) - STACK_TOP_DELTA)
+#define task_pt_regs(task) \
+ ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1)
+#define task_sp(task) (task_pt_regs(task)->sp)
+#define task_pc(task) (task_pt_regs(task)->pc)
+/* Aliases for pc and sp (used in fs/proc/array.c) */
+#define KSTK_EIP(task) task_pc(task)
+#define KSTK_ESP(task) task_sp(task)
+
+/* Standard format for printing registers and other word-size data. */
+#ifdef __tilegx__
+# define REGFMT "0x%016lx"
+#else
+# define REGFMT "0x%08lx"
+#endif
+
+/*
+ * Do some slow action (e.g. read a slow SPR).
+ * Note that this must also have compiler-barrier semantics since
+ * it may be used in a busy loop reading memory.
+ */
+static inline void cpu_relax(void)
+{
+ __insn_mfspr(SPR_PASS);
+ barrier();
+}
+
+struct siginfo;
+extern void arch_coredump_signal(struct siginfo *, struct pt_regs *);
+#define arch_coredump_signal arch_coredump_signal
+
+/* Provide information about the chip model. */
+extern char chip_model[64];
+
+/* Data on which physical memory controller corresponds to which NUMA node. */
+extern int node_controller[];
+
+
+/* Do we dump information to the console when a user application crashes? */
+extern int show_crashinfo;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Does the heap allocator return hash-for-home pages by default? */
+extern int hash_default;
+
+/* Should kernel stack pages be hash-for-home? */
+extern int kstack_hash;
+#else
+#define hash_default 0
+#define kstack_hash 0
+#endif
+
+/* Are we using huge pages in the TLB for kernel data? */
+extern int kdata_huge;
+
+/*
+ * Note that with OLOC the prefetch will return an unused read word to
+ * the issuing tile, which will cause some MDN traffic. Benchmarking
+ * should be done to see whether this outweighs prefetching.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+#define prefetch(ptr) __builtin_prefetch((ptr), 0, 3)
+#define prefetchw(ptr) __builtin_prefetch((ptr), 1, 3)
+
+#ifdef CONFIG_SMP
+#define spin_lock_prefetch(ptr) prefetchw(ptr)
+#else
+/* Nothing to prefetch. */
+#define spin_lock_prefetch(lock) do { } while (0)
+#endif
+
+#else /* __ASSEMBLY__ */
+
+/* Do some slow action (e.g. read a slow SPR). */
+#define CPU_RELAX mfspr zero, SPR_PASS
+
+#endif /* !__ASSEMBLY__ */
+
+/* Assembly code assumes that the PL is in the low bits. */
+#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0
+# error Fix assembly assumptions about PL
+#endif
+
+/* We sometimes use these macros for EX_CONTEXT_0_1 as well. */
+#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \
+ SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \
+ SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \
+ SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK
+# error Fix assumptions that EX1 macros work for both PL0 and PL1
+#endif
+
+/* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */
+#define EX1_PL(ex1) \
+ (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK)
+#define EX1_ICS(ex1) \
+ (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK)
+#define PL_ICS_EX1(pl, ics) \
+ (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \
+ ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT))
+
+/*
+ * Provide symbolic constants for PLs.
+ * Note that assembly code assumes that USER_PL is zero.
+ */
+#define USER_PL 0
+#define KERNEL_PL 1
+
+/* SYSTEM_SAVE_1_0 holds the current cpu number ORed with ksp0. */
+#define CPU_LOG_MASK_VALUE 12
+#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1)
+#if CONFIG_NR_CPUS > CPU_MASK_VALUE
+# error Too many cpus!
+#endif
+#define raw_smp_processor_id() \
+ ((int)__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & CPU_MASK_VALUE)
+#define get_current_ksp0() \
+ (__insn_mfspr(SPR_SYSTEM_SAVE_1_0) & ~CPU_MASK_VALUE)
+#define next_current_ksp0(task) ({ \
+ unsigned long __ksp0 = task_ksp0(task); \
+ int __cpu = raw_smp_processor_id(); \
+ BUG_ON(__ksp0 & CPU_MASK_VALUE); \
+ __ksp0 | __cpu; \
+})
+
+#endif /* _ASM_TILE_PROCESSOR_H */
diff --git a/arch/tile/include/asm/ptrace.h b/arch/tile/include/asm/ptrace.h
new file mode 100644
index 000000000000..4d1d9953016a
--- /dev/null
+++ b/arch/tile/include/asm/ptrace.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_PTRACE_H
+#define _ASM_TILE_PTRACE_H
+
+#include <arch/chip.h>
+#include <arch/abi.h>
+
+/* These must match struct pt_regs, below. */
+#if CHIP_WORD_SIZE() == 32
+#define PTREGS_OFFSET_REG(n) ((n)*4)
+#else
+#define PTREGS_OFFSET_REG(n) ((n)*8)
+#endif
+#define PTREGS_OFFSET_BASE 0
+#define PTREGS_OFFSET_TP PTREGS_OFFSET_REG(53)
+#define PTREGS_OFFSET_SP PTREGS_OFFSET_REG(54)
+#define PTREGS_OFFSET_LR PTREGS_OFFSET_REG(55)
+#define PTREGS_NR_GPRS 56
+#define PTREGS_OFFSET_PC PTREGS_OFFSET_REG(56)
+#define PTREGS_OFFSET_EX1 PTREGS_OFFSET_REG(57)
+#define PTREGS_OFFSET_FAULTNUM PTREGS_OFFSET_REG(58)
+#define PTREGS_OFFSET_ORIG_R0 PTREGS_OFFSET_REG(59)
+#define PTREGS_OFFSET_FLAGS PTREGS_OFFSET_REG(60)
+#if CHIP_HAS_CMPEXCH()
+#define PTREGS_OFFSET_CMPEXCH PTREGS_OFFSET_REG(61)
+#endif
+#define PTREGS_SIZE PTREGS_OFFSET_REG(64)
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+/* Benefit from consistent use of "long" on all chips. */
+typedef unsigned long pt_reg_t;
+#else
+/* Provide appropriate length type to userspace regardless of -m32/-m64. */
+typedef uint_reg_t pt_reg_t;
+#endif
+
+/*
+ * This struct defines the way the registers are stored on the stack during a
+ * system call/exception. It should be a multiple of 8 bytes to preserve
+ * normal stack alignment rules.
+ *
+ * Must track <sys/ucontext.h> and <sys/procfs.h>
+ */
+struct pt_regs {
+ /* Saved main processor registers; 56..63 are special. */
+ /* tp, sp, and lr must immediately follow regs[] for aliasing. */
+ pt_reg_t regs[53];
+ pt_reg_t tp; /* aliases regs[TREG_TP] */
+ pt_reg_t sp; /* aliases regs[TREG_SP] */
+ pt_reg_t lr; /* aliases regs[TREG_LR] */
+
+ /* Saved special registers. */
+ pt_reg_t pc; /* stored in EX_CONTEXT_1_0 */
+ pt_reg_t ex1; /* stored in EX_CONTEXT_1_1 (PL and ICS bit) */
+ pt_reg_t faultnum; /* fault number (INT_SWINT_1 for syscall) */
+ pt_reg_t orig_r0; /* r0 at syscall entry, else zero */
+ pt_reg_t flags; /* flags (see below) */
+#if !CHIP_HAS_CMPEXCH()
+ pt_reg_t pad[3];
+#else
+ pt_reg_t cmpexch; /* value of CMPEXCH_VALUE SPR at interrupt */
+ pt_reg_t pad[2];
+#endif
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* Flag bits in pt_regs.flags */
+#define PT_FLAGS_DISABLE_IRQ 1 /* on return to kernel, disable irqs */
+#define PT_FLAGS_CALLER_SAVES 2 /* caller-save registers are valid */
+#define PT_FLAGS_RESTORE_REGS 4 /* restore callee-save regs on return */
+
+#define PTRACE_GETREGS 12
+#define PTRACE_SETREGS 13
+#define PTRACE_GETFPREGS 14
+#define PTRACE_SETFPREGS 15
+
+/* Support TILE-specific ptrace options, with events starting at 16. */
+#define PTRACE_O_TRACEMIGRATE 0x00010000
+#define PTRACE_EVENT_MIGRATE 16
+#ifdef __KERNEL__
+#define PTRACE_O_MASK_TILE (PTRACE_O_TRACEMIGRATE)
+#define PT_TRACE_MIGRATE 0x00080000
+#define PT_TRACE_MASK_TILE (PT_TRACE_MIGRATE)
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+
+/* Does the process account for user or for system time? */
+#define user_mode(regs) (EX1_PL((regs)->ex1) == USER_PL)
+
+/* Fill in a struct pt_regs with the current kernel registers. */
+struct pt_regs *get_pt_regs(struct pt_regs *);
+
+extern void show_regs(struct pt_regs *);
+
+#define arch_has_single_step() (1)
+
+/*
+ * A structure for all single-stepper state.
+ *
+ * Also update defines in assembler section if it changes
+ */
+struct single_step_state {
+ /* the page to which we will write hacked-up bundles */
+ void *buffer;
+
+ union {
+ int flags;
+ struct {
+ unsigned long is_enabled:1, update:1, update_reg:6;
+ };
+ };
+
+ unsigned long orig_pc; /* the original PC */
+ unsigned long next_pc; /* return PC if no branch (PC + 1) */
+ unsigned long branch_next_pc; /* return PC if we did branch/jump */
+ unsigned long update_value; /* value to restore to update_target */
+};
+
+/* Single-step the instruction at regs->pc */
+extern void single_step_once(struct pt_regs *regs);
+
+struct task_struct;
+
+extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs,
+ int error_code);
+
+#ifdef __tilegx__
+/* We need this since sigval_t has a user pointer in it, for GETSIGINFO etc. */
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define SINGLESTEP_STATE_MASK_IS_ENABLED 0x1
+#define SINGLESTEP_STATE_MASK_UPDATE 0x2
+#define SINGLESTEP_STATE_TARGET_LB 2
+#define SINGLESTEP_STATE_TARGET_UB 7
+
+#endif /* !__KERNEL__ */
+
+#endif /* _ASM_TILE_PTRACE_H */
diff --git a/arch/tile/include/asm/resource.h b/arch/tile/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/tile/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/tile/include/asm/scatterlist.h b/arch/tile/include/asm/scatterlist.h
new file mode 100644
index 000000000000..c5604242c0d5
--- /dev/null
+++ b/arch/tile/include/asm/scatterlist.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SCATTERLIST_H
+#define _ASM_TILE_SCATTERLIST_H
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#include <asm-generic/scatterlist.h>
+
+#endif /* _ASM_TILE_SCATTERLIST_H */
diff --git a/arch/tile/include/asm/sections.h b/arch/tile/include/asm/sections.h
new file mode 100644
index 000000000000..6c111491f0ed
--- /dev/null
+++ b/arch/tile/include/asm/sections.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SECTIONS_H
+#define _ASM_TILE_SECTIONS_H
+
+#define arch_is_kernel_data arch_is_kernel_data
+
+#include <asm-generic/sections.h>
+
+/* Text and data are at different areas in the kernel VA space. */
+extern char _sinitdata[], _einitdata[];
+
+/* Write-once data is writable only till the end of initialization. */
+extern char __w1data_begin[], __w1data_end[];
+
+extern char __feedback_section_start[], __feedback_section_end[];
+
+/* Handle the discontiguity between _sdata and _stext. */
+static inline int arch_is_kernel_data(unsigned long addr)
+{
+ return addr >= (unsigned long)_sdata &&
+ addr < (unsigned long)_end;
+}
+
+#endif /* _ASM_TILE_SECTIONS_H */
diff --git a/arch/tile/include/asm/sembuf.h b/arch/tile/include/asm/sembuf.h
new file mode 100644
index 000000000000..7673b83cfef7
--- /dev/null
+++ b/arch/tile/include/asm/sembuf.h
@@ -0,0 +1 @@
+#include <asm-generic/sembuf.h>
diff --git a/arch/tile/include/asm/setup.h b/arch/tile/include/asm/setup.h
new file mode 100644
index 000000000000..823ddd47ff6e
--- /dev/null
+++ b/arch/tile/include/asm/setup.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SETUP_H
+#define _ASM_TILE_SETUP_H
+
+#include <linux/pfn.h>
+#include <linux/init.h>
+
+/*
+ * Reserved space for vmalloc and iomap - defined in asm/page.h
+ */
+#define MAXMEM_PFN PFN_DOWN(MAXMEM)
+
+#define COMMAND_LINE_SIZE 2048
+
+void early_panic(const char *fmt, ...);
+void warn_early_printk(void);
+void __init disable_early_printk(void);
+
+#endif /* _ASM_TILE_SETUP_H */
diff --git a/arch/tile/include/asm/shmbuf.h b/arch/tile/include/asm/shmbuf.h
new file mode 100644
index 000000000000..83c05fc2de38
--- /dev/null
+++ b/arch/tile/include/asm/shmbuf.h
@@ -0,0 +1 @@
+#include <asm-generic/shmbuf.h>
diff --git a/arch/tile/include/asm/shmparam.h b/arch/tile/include/asm/shmparam.h
new file mode 100644
index 000000000000..93f30deb95d0
--- /dev/null
+++ b/arch/tile/include/asm/shmparam.h
@@ -0,0 +1 @@
+#include <asm-generic/shmparam.h>
diff --git a/arch/tile/include/asm/sigcontext.h b/arch/tile/include/asm/sigcontext.h
new file mode 100644
index 000000000000..7cd7672e3ad4
--- /dev/null
+++ b/arch/tile/include/asm/sigcontext.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SIGCONTEXT_H
+#define _ASM_TILE_SIGCONTEXT_H
+
+/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
+#include <asm/ptrace.h>
+
+/* Must track <sys/ucontext.h> */
+
+struct sigcontext {
+ struct pt_regs regs;
+};
+
+#endif /* _ASM_TILE_SIGCONTEXT_H */
diff --git a/arch/tile/include/asm/sigframe.h b/arch/tile/include/asm/sigframe.h
new file mode 100644
index 000000000000..994d3d30205f
--- /dev/null
+++ b/arch/tile/include/asm/sigframe.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SIGFRAME_H
+#define _ASM_TILE_SIGFRAME_H
+
+/* Indicate that syscall return should not examine r0 */
+#define INT_SWINT_1_SIGRETURN (~0)
+
+#ifndef __ASSEMBLY__
+
+#include <arch/abi.h>
+
+struct rt_sigframe {
+ unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */
+ struct siginfo info;
+ struct ucontext uc;
+};
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_SIGFRAME_H */
diff --git a/arch/tile/include/asm/siginfo.h b/arch/tile/include/asm/siginfo.h
new file mode 100644
index 000000000000..0c12d1b9ddf2
--- /dev/null
+++ b/arch/tile/include/asm/siginfo.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SIGINFO_H
+#define _ASM_TILE_SIGINFO_H
+
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * Additional Tile-specific SIGILL si_codes
+ */
+#define ILL_DBLFLT (__SI_FAULT|9) /* double fault */
+#define ILL_HARDWALL (__SI_FAULT|10) /* user networks hardwall violation */
+#undef NSIGILL
+#define NSIGILL 10
+
+#endif /* _ASM_TILE_SIGINFO_H */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
new file mode 100644
index 000000000000..d20d326d201b
--- /dev/null
+++ b/arch/tile/include/asm/signal.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SIGNAL_H
+#define _ASM_TILE_SIGNAL_H
+
+/* Do not notify a ptracer when this signal is handled. */
+#define SA_NOPTRACE 0x02000000u
+
+/* Used in earlier Tilera releases, so keeping for binary compatibility. */
+#define SA_RESTORER 0x04000000u
+
+#include <asm-generic/signal.h>
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
+#endif
+
+#endif /* _ASM_TILE_SIGNAL_H */
diff --git a/arch/tile/include/asm/smp.h b/arch/tile/include/asm/smp.h
new file mode 100644
index 000000000000..da24858a7392
--- /dev/null
+++ b/arch/tile/include/asm/smp.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SMP_H
+#define _ASM_TILE_SMP_H
+
+#ifdef CONFIG_SMP
+
+#include <asm/processor.h>
+#include <linux/cpumask.h>
+#include <linux/irqreturn.h>
+
+/* Set up this tile to support receiving hypervisor messages */
+void init_messaging(void);
+
+/* Set up this tile to support receiving device interrupts and IPIs. */
+void init_per_tile_IRQs(void);
+
+/* Send a message to processors specified in mask */
+void send_IPI_many(const struct cpumask *mask, int tag);
+
+/* Send a message to all but the sending processor */
+void send_IPI_allbutself(int tag);
+
+/* Send a message to a specific processor */
+void send_IPI_single(int dest, int tag);
+
+/* Process an IPI message */
+void evaluate_message(int tag);
+
+/* Process an IRQ_RESCHEDULE IPI. */
+irqreturn_t handle_reschedule_ipi(int irq, void *token);
+
+/* Boot a secondary cpu */
+void online_secondary(void);
+
+/* Call a function on a specified set of CPUs (may include this one). */
+extern void on_each_cpu_mask(const struct cpumask *mask,
+ void (*func)(void *), void *info, bool wait);
+
+/* Topology of the supervisor tile grid, and coordinates of boot processor */
+extern HV_Topology smp_topology;
+
+/* Accessors for grid size */
+#define smp_height (smp_topology.height)
+#define smp_width (smp_topology.width)
+
+/* Hypervisor message tags sent via the tile send_IPI*() routines. */
+#define MSG_TAG_START_CPU 1
+#define MSG_TAG_STOP_CPU 2
+#define MSG_TAG_CALL_FUNCTION_MANY 3
+#define MSG_TAG_CALL_FUNCTION_SINGLE 4
+
+/* Hook for the generic smp_call_function_many() routine. */
+static inline void arch_send_call_function_ipi_mask(struct cpumask *mask)
+{
+ send_IPI_many(mask, MSG_TAG_CALL_FUNCTION_MANY);
+}
+
+/* Hook for the generic smp_call_function_single() routine. */
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+ send_IPI_single(cpu, MSG_TAG_CALL_FUNCTION_SINGLE);
+}
+
+/* Print out the boot string describing which cpus were disabled. */
+void print_disabled_cpus(void);
+
+#else /* !CONFIG_SMP */
+
+#define on_each_cpu_mask(mask, func, info, wait) \
+ do { if (cpumask_test_cpu(0, (mask))) func(info); } while (0)
+
+#define smp_master_cpu 0
+#define smp_height 1
+#define smp_width 1
+
+#endif /* !CONFIG_SMP */
+
+
+/* Which cpus may be used as the lotar in a page table entry. */
+extern struct cpumask cpu_lotar_map;
+#define cpu_is_valid_lotar(cpu) cpumask_test_cpu((cpu), &cpu_lotar_map)
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/* Which processors are used for hash-for-home mapping */
+extern struct cpumask hash_for_home_map;
+#endif
+
+/* Which cpus can have their cache flushed by hv_flush_remote(). */
+extern struct cpumask cpu_cacheable_map;
+#define cpu_cacheable(cpu) cpumask_test_cpu((cpu), &cpu_cacheable_map)
+
+/* Convert an HV_LOTAR value into a cpu. */
+static inline int hv_lotar_to_cpu(HV_LOTAR lotar)
+{
+ return HV_LOTAR_X(lotar) + (HV_LOTAR_Y(lotar) * smp_width);
+}
+
+/*
+ * Extension of <linux/cpumask.h> functionality when you just want
+ * to express a mask or suppression or inclusion region without
+ * being too concerned about exactly which cpus are valid in that region.
+ */
+int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits);
+
+#define cpulist_parse_crop(buf, dst) \
+ __cpulist_parse_crop((buf), (dst), NR_CPUS)
+static inline int __cpulist_parse_crop(const char *buf, struct cpumask *dstp,
+ int nbits)
+{
+ return bitmap_parselist_crop(buf, cpumask_bits(dstp), nbits);
+}
+
+#endif /* _ASM_TILE_SMP_H */
diff --git a/arch/tile/include/asm/socket.h b/arch/tile/include/asm/socket.h
new file mode 100644
index 000000000000..6b71384b9d8b
--- /dev/null
+++ b/arch/tile/include/asm/socket.h
@@ -0,0 +1 @@
+#include <asm-generic/socket.h>
diff --git a/arch/tile/include/asm/sockios.h b/arch/tile/include/asm/sockios.h
new file mode 100644
index 000000000000..def6d4746ee7
--- /dev/null
+++ b/arch/tile/include/asm/sockios.h
@@ -0,0 +1 @@
+#include <asm-generic/sockios.h>
diff --git a/arch/tile/include/asm/spinlock.h b/arch/tile/include/asm/spinlock.h
new file mode 100644
index 000000000000..1a8bd4740c28
--- /dev/null
+++ b/arch/tile/include/asm/spinlock.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_H
+#define _ASM_TILE_SPINLOCK_H
+
+#ifdef __tilegx__
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+
+#endif /* _ASM_TILE_SPINLOCK_H */
diff --git a/arch/tile/include/asm/spinlock_32.h b/arch/tile/include/asm/spinlock_32.h
new file mode 100644
index 000000000000..f3a8473c68da
--- /dev/null
+++ b/arch/tile/include/asm/spinlock_32.h
@@ -0,0 +1,200 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * 32-bit SMP spinlocks.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_32_H
+#define _ASM_TILE_SPINLOCK_32_H
+
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <linux/compiler.h>
+
+/*
+ * We only use even ticket numbers so the '1' inserted by a tns is
+ * an unambiguous "ticket is busy" flag.
+ */
+#define TICKET_QUANTUM 2
+
+
+/*
+ * SMP ticket spinlocks, allowing only a single CPU anywhere
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+static inline int arch_spin_is_locked(arch_spinlock_t *lock)
+{
+ /*
+ * Note that even if a new ticket is in the process of being
+ * acquired, so lock->next_ticket is 1, it's still reasonable
+ * to claim the lock is held, since it will be momentarily
+ * if not already. There's no need to wait for a "valid"
+ * lock->next_ticket to become available.
+ */
+ return lock->next_ticket != lock->current_ticket;
+}
+
+void arch_spin_lock(arch_spinlock_t *lock);
+
+/* We cannot take an interrupt after getting a ticket, so don't enable them. */
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
+
+int arch_spin_trylock(arch_spinlock_t *lock);
+
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
+{
+ /* For efficiency, overlap fetching the old ticket with the wmb(). */
+ int old_ticket = lock->current_ticket;
+ wmb(); /* guarantee anything modified under the lock is visible */
+ lock->current_ticket = old_ticket + TICKET_QUANTUM;
+}
+
+void arch_spin_unlock_wait(arch_spinlock_t *lock);
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * We use a "tns/store-back" technique on a single word to manage
+ * the lock state, looping around to retry if the tns returns 1.
+ */
+
+/* Internal layout of the word; do not use. */
+#define _WR_NEXT_SHIFT 8
+#define _WR_CURR_SHIFT 16
+#define _WR_WIDTH 8
+#define _RD_COUNT_SHIFT 24
+#define _RD_COUNT_WIDTH 8
+
+/* Internal functions; do not use. */
+void arch_read_lock_slow(arch_rwlock_t *, u32);
+int arch_read_trylock_slow(arch_rwlock_t *);
+void arch_read_unlock_slow(arch_rwlock_t *);
+void arch_write_lock_slow(arch_rwlock_t *, u32);
+void arch_write_unlock_slow(arch_rwlock_t *, u32);
+
+/**
+ * arch_read_can_lock() - would read_trylock() succeed?
+ */
+static inline int arch_read_can_lock(arch_rwlock_t *rwlock)
+{
+ return (rwlock->lock << _RD_COUNT_WIDTH) == 0;
+}
+
+/**
+ * arch_write_can_lock() - would write_trylock() succeed?
+ */
+static inline int arch_write_can_lock(arch_rwlock_t *rwlock)
+{
+ return rwlock->lock == 0;
+}
+
+/**
+ * arch_read_lock() - acquire a read lock.
+ */
+static inline void arch_read_lock(arch_rwlock_t *rwlock)
+{
+ u32 val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val << _RD_COUNT_WIDTH)) {
+ arch_read_lock_slow(rwlock, val);
+ return;
+ }
+ rwlock->lock = val + (1 << _RD_COUNT_SHIFT);
+}
+
+/**
+ * arch_read_lock() - acquire a write lock.
+ */
+static inline void arch_write_lock(arch_rwlock_t *rwlock)
+{
+ u32 val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val != 0)) {
+ arch_write_lock_slow(rwlock, val);
+ return;
+ }
+ rwlock->lock = 1 << _WR_NEXT_SHIFT;
+}
+
+/**
+ * arch_read_trylock() - try to acquire a read lock.
+ */
+static inline int arch_read_trylock(arch_rwlock_t *rwlock)
+{
+ int locked;
+ u32 val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val & 1)) {
+ return arch_read_trylock_slow(rwlock);
+ }
+ locked = (val << _RD_COUNT_WIDTH) == 0;
+ rwlock->lock = val + (locked << _RD_COUNT_SHIFT);
+ return locked;
+}
+
+/**
+ * arch_write_trylock() - try to acquire a write lock.
+ */
+static inline int arch_write_trylock(arch_rwlock_t *rwlock)
+{
+ u32 val = __insn_tns((int *)&rwlock->lock);
+
+ /*
+ * If a tns is in progress, or there's a waiting or active locker,
+ * or active readers, we can't take the lock, so give up.
+ */
+ if (unlikely(val != 0)) {
+ if (!(val & 1))
+ rwlock->lock = val;
+ return 0;
+ }
+
+ /* Set the "next" field to mark it locked. */
+ rwlock->lock = 1 << _WR_NEXT_SHIFT;
+ return 1;
+}
+
+/**
+ * arch_read_unlock() - release a read lock.
+ */
+static inline void arch_read_unlock(arch_rwlock_t *rwlock)
+{
+ u32 val;
+ mb(); /* guarantee anything modified under the lock is visible */
+ val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val & 1)) {
+ arch_read_unlock_slow(rwlock);
+ return;
+ }
+ rwlock->lock = val - (1 << _RD_COUNT_SHIFT);
+}
+
+/**
+ * arch_write_unlock() - release a write lock.
+ */
+static inline void arch_write_unlock(arch_rwlock_t *rwlock)
+{
+ u32 val;
+ mb(); /* guarantee anything modified under the lock is visible */
+ val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val != (1 << _WR_NEXT_SHIFT))) {
+ arch_write_unlock_slow(rwlock, val);
+ return;
+ }
+ rwlock->lock = 0;
+}
+
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
+
+#endif /* _ASM_TILE_SPINLOCK_32_H */
diff --git a/arch/tile/include/asm/spinlock_types.h b/arch/tile/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..a71f59b49c50
--- /dev/null
+++ b/arch/tile/include/asm/spinlock_types.h
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SPINLOCK_TYPES_H
+#define _ASM_TILE_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+#ifdef __tilegx__
+
+/* Low 15 bits are "next"; high 15 bits are "current". */
+typedef struct arch_spinlock {
+ unsigned int lock;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { 0 }
+
+/* High bit is "writer owns"; low 31 bits are a count of readers. */
+typedef struct arch_rwlock {
+ unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED { 0 }
+
+#else
+
+typedef struct arch_spinlock {
+ /* Next ticket number to hand out. */
+ int next_ticket;
+ /* The ticket number that currently owns this lock. */
+ int current_ticket;
+} arch_spinlock_t;
+
+#define __ARCH_SPIN_LOCK_UNLOCKED { 0, 0 }
+
+/*
+ * Byte 0 for tns (only the low bit is used), byte 1 for ticket-lock "next",
+ * byte 2 for ticket-lock "current", byte 3 for reader count.
+ */
+typedef struct arch_rwlock {
+ unsigned int lock;
+} arch_rwlock_t;
+
+#define __ARCH_RW_LOCK_UNLOCKED { 0 }
+
+#endif
+#endif /* _ASM_TILE_SPINLOCK_TYPES_H */
diff --git a/arch/tile/include/asm/stack.h b/arch/tile/include/asm/stack.h
new file mode 100644
index 000000000000..864913bcfbc9
--- /dev/null
+++ b/arch/tile/include/asm/stack.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_STACK_H
+#define _ASM_TILE_STACK_H
+
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/backtrace.h>
+#include <hv/hypervisor.h>
+
+/* Everything we need to keep track of a backtrace iteration */
+struct KBacktraceIterator {
+ BacktraceIterator it;
+ struct task_struct *task; /* task we are backtracing */
+ HV_PTE *pgtable; /* page table for user space access */
+ int end; /* iteration complete. */
+ int new_context; /* new context is starting */
+ int profile; /* profiling, so stop on async intrpt */
+ int verbose; /* printk extra info (don't want to
+ * do this for profiling) */
+ int is_current; /* backtracing current task */
+};
+
+/* Iteration methods for kernel backtraces */
+
+/*
+ * Initialize a KBacktraceIterator from a task_struct, and optionally from
+ * a set of registers. If the registers are omitted, the process is
+ * assumed to be descheduled, and registers are read from the process's
+ * thread_struct and stack. "verbose" means to printk some additional
+ * information about fault handlers as we pass them on the stack.
+ */
+extern void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
+ struct task_struct *, struct pt_regs *);
+
+/* Initialize iterator based on current stack. */
+extern void KBacktraceIterator_init_current(struct KBacktraceIterator *kbt);
+
+/* No more frames? */
+extern int KBacktraceIterator_end(struct KBacktraceIterator *kbt);
+
+/* Advance to the next frame. */
+extern void KBacktraceIterator_next(struct KBacktraceIterator *kbt);
+
+/*
+ * Dump stack given complete register info. Use only from the
+ * architecture-specific code; show_stack()
+ * and dump_stack() (in entry.S) are architecture-independent entry points.
+ */
+extern void tile_show_stack(struct KBacktraceIterator *, int headers);
+
+/* Dump stack of current process, with registers to seed the backtrace. */
+extern void dump_stack_regs(struct pt_regs *);
+
+
+#endif /* _ASM_TILE_STACK_H */
diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/asm/stat.h
new file mode 100644
index 000000000000..3dc90fa92c70
--- /dev/null
+++ b/arch/tile/include/asm/stat.h
@@ -0,0 +1 @@
+#include <asm-generic/stat.h>
diff --git a/arch/tile/include/asm/statfs.h b/arch/tile/include/asm/statfs.h
new file mode 100644
index 000000000000..0b91fe198c20
--- /dev/null
+++ b/arch/tile/include/asm/statfs.h
@@ -0,0 +1 @@
+#include <asm-generic/statfs.h>
diff --git a/arch/tile/include/asm/string.h b/arch/tile/include/asm/string.h
new file mode 100644
index 000000000000..7535cf1a30e4
--- /dev/null
+++ b/arch/tile/include/asm/string.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_STRING_H
+#define _ASM_TILE_STRING_H
+
+#define __HAVE_ARCH_MEMCHR
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_STRCHR
+#define __HAVE_ARCH_STRLEN
+
+extern __kernel_size_t strlen(const char *);
+extern char *strchr(const char *s, int c);
+extern void *memchr(const void *s, int c, size_t n);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#endif /* _ASM_TILE_STRING_H */
diff --git a/arch/tile/include/asm/swab.h b/arch/tile/include/asm/swab.h
new file mode 100644
index 000000000000..25c686a00f1d
--- /dev/null
+++ b/arch/tile/include/asm/swab.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SWAB_H
+#define _ASM_TILE_SWAB_H
+
+/* Tile gcc is always >= 4.3.0, so we use __builtin_bswap. */
+#define __arch_swab32(x) __builtin_bswap32(x)
+#define __arch_swab64(x) __builtin_bswap64(x)
+
+/* Use the variant that is natural for the wordsize. */
+#ifdef CONFIG_64BIT
+#define __arch_swab16(x) (__builtin_bswap64(x) >> 48)
+#else
+#define __arch_swab16(x) (__builtin_bswap32(x) >> 16)
+#endif
+
+#endif /* _ASM_TILE_SWAB_H */
diff --git a/arch/tile/include/asm/syscall.h b/arch/tile/include/asm/syscall.h
new file mode 100644
index 000000000000..d35e0dcb67b1
--- /dev/null
+++ b/arch/tile/include/asm/syscall.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved.
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_TILE_SYSCALL_H
+#define _ASM_TILE_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+#include <arch/abi.h>
+
+/*
+ * Only the low 32 bits of orig_r0 are meaningful, so we return int.
+ * This importantly ignores the high bits on 64-bit, so comparisons
+ * sign-extend the low 32 bits.
+ */
+static inline int syscall_get_nr(struct task_struct *t, struct pt_regs *regs)
+{
+ return regs->regs[TREG_SYSCALL_NR];
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->regs[0] = regs->orig_r0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->regs[0];
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->regs[0];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->regs[0] = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+ memcpy(args, &regs[i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+ memcpy(&regs[i], args, n * sizeof(args[0]));
+}
+
+#endif /* _ASM_TILE_SYSCALL_H */
diff --git a/arch/tile/include/asm/syscalls.h b/arch/tile/include/asm/syscalls.h
new file mode 100644
index 000000000000..e1be54d1a7d8
--- /dev/null
+++ b/arch/tile/include/asm/syscalls.h
@@ -0,0 +1,60 @@
+/*
+ * syscalls.h - Linux syscall interfaces (arch-specific)
+ *
+ * Copyright (c) 2008 Jaswinder Singh Rajput
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SYSCALLS_H
+#define _ASM_TILE_SYSCALLS_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+/* kernel/process.c */
+int sys_fork(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+int sys_clone(unsigned long clone_flags, unsigned long newsp,
+ int __user *parent_tidptr, int __user *child_tidptr,
+ struct pt_regs *);
+int sys_execve(char __user *path, char __user *__user *argv,
+ char __user *__user *envp, struct pt_regs *);
+
+/* kernel/signal.c */
+int sys_sigaltstack(const stack_t __user *, stack_t __user *,
+ struct pt_regs *);
+long sys_rt_sigreturn(struct pt_regs *);
+int sys_raise_fpe(int code, unsigned long addr, struct pt_regs*);
+
+/* kernel/sys.c */
+ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count);
+long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
+ u32 len, int advice);
+int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
+ u32 len_lo, u32 len_hi, int advice);
+long sys_flush_cache(void);
+long sys_mmap(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset);
+long sys_mmap2(unsigned long addr, unsigned long len,
+ unsigned long prot, unsigned long flags,
+ unsigned long fd, unsigned long offset);
+
+#ifndef __tilegx__
+/* mm/fault.c */
+int sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *);
+#endif
+
+#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/asm/system.h b/arch/tile/include/asm/system.h
new file mode 100644
index 000000000000..d6ca7f816c87
--- /dev/null
+++ b/arch/tile/include/asm/system.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_SYSTEM_H
+#define _ASM_TILE_SYSTEM_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/irqflags.h>
+
+/* NOTE: we can't include <linux/ptrace.h> due to #include dependencies. */
+#include <asm/ptrace.h>
+
+#include <arch/chip.h>
+#include <arch/sim_def.h>
+#include <arch/spr_def.h>
+
+/*
+ * read_barrier_depends - Flush all pending reads that subsequents reads
+ * depend on.
+ *
+ * No data-dependent reads from memory-like regions are ever reordered
+ * over this barrier. All reads preceding this primitive are guaranteed
+ * to access memory (but not necessarily other CPUs' caches) before any
+ * reads following this primitive that depend on the data return by
+ * any of the preceding reads. This primitive is much lighter weight than
+ * rmb() on most CPUs, and is never heavier weight than is
+ * rmb().
+ *
+ * These ordering constraints are respected by both the local CPU
+ * and the compiler.
+ *
+ * Ordering is not guaranteed by anything other than these primitives,
+ * not even by data dependencies. See the documentation for
+ * memory_barrier() for examples and URLs to more information.
+ *
+ * For example, the following code would force ordering (the initial
+ * value of "a" is zero, "b" is one, and "p" is "&a"):
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * b = 2;
+ * memory_barrier();
+ * p = &b; q = p;
+ * read_barrier_depends();
+ * d = *q;
+ * </programlisting>
+ *
+ * because the read of "*q" depends on the read of "p" and these
+ * two reads are separated by a read_barrier_depends(). However,
+ * the following code, with the same initial values for "a" and "b":
+ *
+ * <programlisting>
+ * CPU 0 CPU 1
+ *
+ * a = 2;
+ * memory_barrier();
+ * b = 3; y = b;
+ * read_barrier_depends();
+ * x = a;
+ * </programlisting>
+ *
+ * does not enforce ordering, since there is no data dependency between
+ * the read of "a" and the read of "b". Therefore, on some CPUs, such
+ * as Alpha, "y" could be set to 3 and "x" to 0. Use rmb()
+ * in cases like this where there are no data dependencies.
+ */
+
+#define read_barrier_depends() do { } while (0)
+
+#define __sync() __insn_mf()
+
+#if CHIP_HAS_SPLIT_CYCLE()
+#define get_cycles_low() __insn_mfspr(SPR_CYCLE_LOW)
+#else
+#define get_cycles_low() __insn_mfspr(SPR_CYCLE) /* just get all 64 bits */
+#endif
+
+/* Fence to guarantee visibility of stores to incoherent memory. */
+static inline void
+mb_incoherent(void)
+{
+ __insn_mf();
+
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+ {
+ int __mb_incoherent(void);
+#if CHIP_HAS_TILE_WRITE_PENDING()
+ const unsigned long WRITE_TIMEOUT_CYCLES = 400;
+ unsigned long start = get_cycles_low();
+ do {
+ if (__insn_mfspr(SPR_TILE_WRITE_PENDING) == 0)
+ return;
+ } while ((get_cycles_low() - start) < WRITE_TIMEOUT_CYCLES);
+#endif /* CHIP_HAS_TILE_WRITE_PENDING() */
+ (void) __mb_incoherent();
+ }
+#endif /* CHIP_HAS_MF_WAITS_FOR_VICTIMS() */
+}
+
+#define fast_wmb() __sync()
+#define fast_rmb() __sync()
+#define fast_mb() __sync()
+#define fast_iob() mb_incoherent()
+
+#define wmb() fast_wmb()
+#define rmb() fast_rmb()
+#define mb() fast_mb()
+#define iob() fast_iob()
+
+#ifdef CONFIG_SMP
+#define smp_mb() mb()
+#define smp_rmb() rmb()
+#define smp_wmb() wmb()
+#define smp_read_barrier_depends() read_barrier_depends()
+#else
+#define smp_mb() barrier()
+#define smp_rmb() barrier()
+#define smp_wmb() barrier()
+#define smp_read_barrier_depends() do { } while (0)
+#endif
+
+#define set_mb(var, value) \
+ do { var = value; mb(); } while (0)
+
+#include <linux/irqflags.h>
+
+/*
+ * Pause the DMA engine and static network before task switching.
+ */
+#define prepare_arch_switch(next) _prepare_arch_switch(next)
+void _prepare_arch_switch(struct task_struct *next);
+
+
+/*
+ * switch_to(n) should switch tasks to task nr n, first
+ * checking that n isn't the current task, in which case it does nothing.
+ * The number of callee-saved registers saved on the kernel stack
+ * is defined here for use in copy_thread() and must agree with __switch_to().
+ */
+#endif /* !__ASSEMBLY__ */
+#define CALLEE_SAVED_FIRST_REG 30
+#define CALLEE_SAVED_REGS_COUNT 24 /* r30 to r52, plus an empty to align */
+#ifndef __ASSEMBLY__
+struct task_struct;
+#define switch_to(prev, next, last) ((last) = _switch_to((prev), (next)))
+extern struct task_struct *_switch_to(struct task_struct *prev,
+ struct task_struct *next);
+
+/*
+ * On SMP systems, when the scheduler does migration-cost autodetection,
+ * it needs a way to flush as much of the CPU's caches as possible:
+ *
+ * TODO: fill this in!
+ */
+static inline void sched_cacheflush(void)
+{
+}
+
+#define arch_align_stack(x) (x)
+
+/*
+ * Is the kernel doing fixups of unaligned accesses? If <0, no kernel
+ * intervention occurs and SIGBUS is delivered with no data address
+ * info. If 0, the kernel single-steps the instruction to discover
+ * the data address to provide with the SIGBUS. If 1, the kernel does
+ * a fixup.
+ */
+extern int unaligned_fixup;
+
+/* Is the kernel printing on each unaligned fixup? */
+extern int unaligned_printk;
+
+/* Number of unaligned fixups performed */
+extern unsigned int unaligned_fixup_count;
+
+/* User-level DMA management functions */
+void grant_dma_mpls(void);
+void restrict_dma_mpls(void);
+
+
+/* Invoke the simulator "syscall" mechanism (see arch/tile/kernel/entry.S). */
+extern int _sim_syscall(int syscall_num, ...);
+#define sim_syscall(syscall_num, ...) \
+ _sim_syscall(SIM_CONTROL_SYSCALL + \
+ ((syscall_num) << _SIM_CONTROL_OPERATOR_BITS), \
+ ## __VA_ARGS__)
+
+/*
+ * Kernel threads can check to see if they need to migrate their
+ * stack whenever they return from a context switch; for user
+ * threads, we defer until they are returning to user-space.
+ */
+#define finish_arch_switch(prev) do { \
+ if (unlikely((prev)->state == TASK_DEAD)) \
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_EXIT | \
+ ((prev)->pid << _SIM_CONTROL_OPERATOR_BITS)); \
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_SWITCH | \
+ (current->pid << _SIM_CONTROL_OPERATOR_BITS)); \
+ if (current->mm == NULL && !kstack_hash && \
+ current_thread_info()->homecache_cpu != smp_processor_id()) \
+ homecache_migrate_kthread(); \
+} while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_SYSTEM_H */
diff --git a/arch/tile/include/asm/termbits.h b/arch/tile/include/asm/termbits.h
new file mode 100644
index 000000000000..3935b106de79
--- /dev/null
+++ b/arch/tile/include/asm/termbits.h
@@ -0,0 +1 @@
+#include <asm-generic/termbits.h>
diff --git a/arch/tile/include/asm/termios.h b/arch/tile/include/asm/termios.h
new file mode 100644
index 000000000000..280d78a9d966
--- /dev/null
+++ b/arch/tile/include/asm/termios.h
@@ -0,0 +1 @@
+#include <asm-generic/termios.h>
diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h
new file mode 100644
index 000000000000..9024bf3530aa
--- /dev/null
+++ b/arch/tile/include/asm/thread_info.h
@@ -0,0 +1,165 @@
+/*
+ * Copyright (C) 2002 David Howells (dhowells@redhat.com)
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_THREAD_INFO_H
+#define _ASM_TILE_THREAD_INFO_H
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#ifndef __ASSEMBLY__
+
+/*
+ * Low level task data that assembly code needs immediate access to.
+ * The structure is placed at the bottom of the supervisor stack.
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ unsigned long status; /* thread-synchronous flags */
+ __u32 homecache_cpu; /* CPU we are homecached on */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable,
+ <0 => BUG */
+
+ mm_segment_t addr_limit; /* thread address space
+ (KERNEL_DS or USER_DS) */
+ struct restart_block restart_block;
+ struct single_step_state *step_state; /* single step state
+ (if non-zero) */
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure.
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+ .step_state = 0, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+#endif /* !__ASSEMBLY__ */
+
+#if PAGE_SIZE < 8192
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
+#else
+#define THREAD_SIZE_ORDER (0)
+#endif
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
+#define LOG2_THREAD_SIZE (PAGE_SHIFT + THREAD_SIZE_ORDER)
+
+#define STACK_WARN (THREAD_SIZE/8)
+
+#ifndef __ASSEMBLY__
+
+/* How to get the thread information struct from C. */
+register unsigned long stack_pointer __asm__("sp");
+
+#define current_thread_info() \
+ ((struct thread_info *)(stack_pointer & -THREAD_SIZE))
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+extern struct thread_info *alloc_thread_info(struct task_struct *task);
+extern void free_thread_info(struct thread_info *info);
+
+/* Switch boot idle thread to a freshly-allocated stack and free old stack. */
+extern void cpu_idle_on_new_stack(struct thread_info *old_ti,
+ unsigned long new_sp,
+ unsigned long new_ss10);
+
+#else /* __ASSEMBLY__ */
+
+/* how to get the thread information struct from ASM */
+#ifdef __tilegx__
+#define GET_THREAD_INFO(reg) move reg, sp; mm reg, zero, LOG2_THREAD_SIZE, 63
+#else
+#define GET_THREAD_INFO(reg) mm reg, sp, zero, LOG2_THREAD_SIZE, 31
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE 0x10000000
+
+/*
+ * Thread information flags that various assembly files may need to access.
+ * Keep flags accessed frequently in low bits, particular since it makes
+ * it easier to build constants in assembly.
+ */
+#define TIF_SIGPENDING 0 /* signal pending */
+#define TIF_NEED_RESCHED 1 /* rescheduling necessary */
+#define TIF_SINGLESTEP 2 /* restore singlestep on return to
+ user mode */
+#define TIF_ASYNC_TLB 3 /* got an async TLB fault in kernel */
+#define TIF_SYSCALL_TRACE 4 /* syscall trace active */
+#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */
+#define TIF_SECCOMP 6 /* secure computing */
+#define TIF_MEMDIE 7 /* OOM killer at work */
+
+#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
+#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
+#define _TIF_ASYNC_TLB (1<<TIF_ASYNC_TLB)
+#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP (1<<TIF_SECCOMP)
+#define _TIF_MEMDIE (1<<TIF_MEMDIE)
+
+/* Work to do on any return to user space. */
+#define _TIF_ALLWORK_MASK \
+ (_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SINGLESTEP|_TIF_ASYNC_TLB)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ */
+#ifdef __tilegx__
+#define TS_COMPAT 0x0001 /* 32-bit compatibility mode */
+#endif
+#define TS_POLLING 0x0004 /* in idle loop but not sleeping */
+#define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal */
+#define TS_EXEC_HASH_SET 0x0010 /* apply TS_EXEC_HASH_xxx flags */
+#define TS_EXEC_HASH_RO 0x0020 /* during exec, hash r/o segments */
+#define TS_EXEC_HASH_RW 0x0040 /* during exec, hash r/w segments */
+#define TS_EXEC_HASH_STACK 0x0080 /* during exec, hash the stack */
+#define TS_EXEC_HASH_FLAGS 0x00f0 /* mask for TS_EXEC_HASH_xxx flags */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_TILE_THREAD_INFO_H */
diff --git a/arch/tile/include/asm/timex.h b/arch/tile/include/asm/timex.h
new file mode 100644
index 000000000000..3baf5fc4c0a1
--- /dev/null
+++ b/arch/tile/include/asm/timex.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_TIMEX_H
+#define _ASM_TILE_TIMEX_H
+
+/*
+ * This rate should be a multiple of the possible HZ values (100, 250, 1000)
+ * and a fraction of the possible hardware timer frequencies. Our timer
+ * frequency is highly tunable but also quite precise, so for the primary use
+ * of this value (setting ACT_HZ from HZ) we just pick a value that causes
+ * ACT_HZ to be set to HZ. We make the value somewhat large just to be
+ * more robust in case someone tries out a new value of HZ.
+ */
+#define CLOCK_TICK_RATE 1000000
+
+typedef unsigned long long cycles_t;
+
+#if CHIP_HAS_SPLIT_CYCLE()
+cycles_t get_cycles(void);
+#else
+static inline cycles_t get_cycles(void)
+{
+ return __insn_mfspr(SPR_CYCLE);
+}
+#endif
+
+cycles_t get_clock_rate(void);
+
+/* Called at cpu initialization to set some low-level constants. */
+void setup_clock(void);
+
+/* Called at cpu initialization to start the tile-timer clock device. */
+void setup_tile_timer(void);
+
+#endif /* _ASM_TILE_TIMEX_H */
diff --git a/arch/tile/include/asm/tlb.h b/arch/tile/include/asm/tlb.h
new file mode 100644
index 000000000000..4a891a1a8df3
--- /dev/null
+++ b/arch/tile/include/asm/tlb.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_TLB_H
+#define _ASM_TILE_TLB_H
+
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_TILE_TLB_H */
diff --git a/arch/tile/include/asm/tlbflush.h b/arch/tile/include/asm/tlbflush.h
new file mode 100644
index 000000000000..96199d214fb8
--- /dev/null
+++ b/arch/tile/include/asm/tlbflush.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_TLBFLUSH_H
+#define _ASM_TILE_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#include <hv/hypervisor.h>
+
+/*
+ * Rather than associating each mm with its own ASID, we just use
+ * ASIDs to allow us to lazily flush the TLB when we switch mms.
+ * This way we only have to do an actual TLB flush on mm switch
+ * every time we wrap ASIDs, not every single time we switch.
+ *
+ * FIXME: We might improve performance by keeping ASIDs around
+ * properly, though since the hypervisor direct-maps VAs to TSB
+ * entries, we're likely to have lost at least the executable page
+ * mappings by the time we switch back to the original mm.
+ */
+DECLARE_PER_CPU(int, current_asid);
+
+/* The hypervisor tells us what ASIDs are available to us. */
+extern int min_asid, max_asid;
+
+static inline unsigned long hv_page_size(const struct vm_area_struct *vma)
+{
+ return (vma->vm_flags & VM_HUGETLB) ? HPAGE_SIZE : PAGE_SIZE;
+}
+
+/* Pass as vma pointer for non-executable mapping, if no vma available. */
+#define FLUSH_NONEXEC ((const struct vm_area_struct *)-1UL)
+
+/* Flush a single user page on this cpu. */
+static inline void local_flush_tlb_page(const struct vm_area_struct *vma,
+ unsigned long addr,
+ unsigned long page_size)
+{
+ int rc = hv_flush_page(addr, page_size);
+ if (rc < 0)
+ panic("hv_flush_page(%#lx,%#lx) failed: %d",
+ addr, page_size, rc);
+ if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC)))
+ __flush_icache();
+}
+
+/* Flush range of user pages on this cpu. */
+static inline void local_flush_tlb_pages(const struct vm_area_struct *vma,
+ unsigned long addr,
+ unsigned long page_size,
+ unsigned long len)
+{
+ int rc = hv_flush_pages(addr, page_size, len);
+ if (rc < 0)
+ panic("hv_flush_pages(%#lx,%#lx,%#lx) failed: %d",
+ addr, page_size, len, rc);
+ if (!vma || (vma != FLUSH_NONEXEC && (vma->vm_flags & VM_EXEC)))
+ __flush_icache();
+}
+
+/* Flush all user pages on this cpu. */
+static inline void local_flush_tlb(void)
+{
+ int rc = hv_flush_all(1); /* preserve global mappings */
+ if (rc < 0)
+ panic("hv_flush_all(1) failed: %d", rc);
+ __flush_icache();
+}
+
+/*
+ * Global pages have to be flushed a bit differently. Not a real
+ * performance problem because this does not happen often.
+ */
+static inline void local_flush_tlb_all(void)
+{
+ int i;
+ for (i = 0; ; ++i) {
+ HV_VirtAddrRange r = hv_inquire_virtual(i);
+ if (r.size == 0)
+ break;
+ local_flush_tlb_pages(NULL, r.start, PAGE_SIZE, r.size);
+ local_flush_tlb_pages(NULL, r.start, HPAGE_SIZE, r.size);
+ }
+}
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb() flushes the current mm struct TLBs
+ * - flush_tlb_all() flushes all processes TLBs
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ * - flush_tlb_others(cpumask, mm, va) flushes TLBs on other cpus
+ *
+ * Here (as in vm_area_struct), "end" means the first byte after
+ * our end address.
+ */
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_current_task(void);
+extern void flush_tlb_mm(struct mm_struct *);
+extern void flush_tlb_page(const struct vm_area_struct *, unsigned long);
+extern void flush_tlb_page_mm(const struct vm_area_struct *,
+ struct mm_struct *, unsigned long);
+extern void flush_tlb_range(const struct vm_area_struct *,
+ unsigned long start, unsigned long end);
+
+#define flush_tlb() flush_tlb_current_task()
+
+#endif /* _ASM_TILE_TLBFLUSH_H */
diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h
new file mode 100644
index 000000000000..343172d422a9
--- /dev/null
+++ b/arch/tile/include/asm/topology.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_TOPOLOGY_H
+#define _ASM_TILE_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cpumask.h>
+
+/* Mappings between logical cpu number and node number. */
+extern struct cpumask node_2_cpu_mask[];
+extern char cpu_2_node[];
+
+/* Returns the number of the node containing CPU 'cpu'. */
+static inline int cpu_to_node(int cpu)
+{
+ return cpu_2_node[cpu];
+}
+
+/*
+ * Returns the number of the node containing Node 'node'.
+ * This architecture is flat, so it is a pretty simple function!
+ */
+#define parent_node(node) (node)
+
+/* Returns a bitmask of CPUs on Node 'node'. */
+static inline const struct cpumask *cpumask_of_node(int node)
+{
+ return &node_2_cpu_mask[node];
+}
+
+/* For now, use numa node -1 for global allocation. */
+#define pcibus_to_node(bus) ((void)(bus), -1)
+
+/* sched_domains SD_NODE_INIT for TILE architecture */
+#define SD_NODE_INIT (struct sched_domain) { \
+ .min_interval = 8, \
+ .max_interval = 32, \
+ .busy_factor = 32, \
+ .imbalance_pct = 125, \
+ .cache_nice_tries = 1, \
+ .busy_idx = 3, \
+ .idle_idx = 1, \
+ .newidle_idx = 2, \
+ .wake_idx = 1, \
+ .flags = SD_LOAD_BALANCE \
+ | SD_BALANCE_NEWIDLE \
+ | SD_BALANCE_EXEC \
+ | SD_BALANCE_FORK \
+ | SD_WAKE_AFFINE \
+ | SD_SERIALIZE, \
+ .last_balance = jiffies, \
+ .balance_interval = 1, \
+}
+
+/* By definition, we create nodes based on online memory. */
+#define node_has_online_mem(nid) 1
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu) ((void)(cpu), 0)
+#define topology_core_id(cpu) (cpu)
+#define topology_core_cpumask(cpu) ((void)(cpu), cpu_online_mask)
+#define topology_thread_cpumask(cpu) cpumask_of(cpu)
+
+/* indicates that pointers to the topology struct cpumask maps are valid */
+#define arch_provides_topology_pointers yes
+#endif
+
+#endif /* _ASM_TILE_TOPOLOGY_H */
diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h
new file mode 100644
index 000000000000..eab33d4a917d
--- /dev/null
+++ b/arch/tile/include/asm/traps.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_TRAPS_H
+#define _ASM_TILE_TRAPS_H
+
+/* mm/fault.c */
+void do_page_fault(struct pt_regs *, int fault_num,
+ unsigned long address, unsigned long write);
+
+/* kernel/traps.c */
+void do_trap(struct pt_regs *, int fault_num, unsigned long reason);
+
+/* kernel/time.c */
+void do_timer_interrupt(struct pt_regs *, int fault_num);
+
+/* kernel/messaging.c */
+void hv_message_intr(struct pt_regs *, int intnum);
+
+/* kernel/irq.c */
+void tile_dev_intr(struct pt_regs *, int intnum);
+
+
+
+#endif /* _ASM_TILE_SYSCALLS_H */
diff --git a/arch/tile/include/asm/types.h b/arch/tile/include/asm/types.h
new file mode 100644
index 000000000000..b9e79bc580dd
--- /dev/null
+++ b/arch/tile/include/asm/types.h
@@ -0,0 +1 @@
+#include <asm-generic/types.h>
diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h
new file mode 100644
index 000000000000..f3058afd5a88
--- /dev/null
+++ b/arch/tile/include/asm/uaccess.h
@@ -0,0 +1,578 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_UACCESS_H
+#define _ASM_TILE_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm-generic/uaccess-unaligned.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define MAKE_MM_SEG(a) ((mm_segment_t) { (a) })
+
+#define KERNEL_DS MAKE_MM_SEG(-1UL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#ifndef __tilegx__
+/*
+ * We could allow mapping all 16 MB at 0xfc000000, but we set up a
+ * special hack in arch_setup_additional_pages() to auto-create a mapping
+ * for the first 16 KB, and it would seem strange to have different
+ * user-accessible semantics for memory at 0xfc000000 and above 0xfc004000.
+ */
+static inline int is_arch_mappable_range(unsigned long addr,
+ unsigned long size)
+{
+ return (addr >= MEM_USER_INTRPT &&
+ addr < (MEM_USER_INTRPT + INTRPT_SIZE) &&
+ size <= (MEM_USER_INTRPT + INTRPT_SIZE) - addr);
+}
+#define is_arch_mappable_range is_arch_mappable_range
+#else
+#define is_arch_mappable_range(addr, size) 0
+#endif
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ */
+int __range_ok(unsigned long addr, unsigned long size);
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) \
+ (likely(__range_ok((unsigned long)addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * We return the __get_user_N function results in a structure,
+ * thus in r0 and r1. If "err" is zero, "val" is the result
+ * of the read; otherwise, "err" is -EFAULT.
+ *
+ * We rarely need 8-byte values on a 32-bit architecture, but
+ * we size the structure to accommodate. In practice, for the
+ * the smaller reads, we can zero the high word for free, and
+ * the caller will ignore it by virtue of casting anyway.
+ */
+struct __get_user {
+ unsigned long long val;
+ int err;
+};
+
+/*
+ * FIXME: we should express these as inline extended assembler, since
+ * they're fundamentally just a variable dereference and some
+ * supporting exception_table gunk. Note that (a la i386) we can
+ * extend the copy_to_user and copy_from_user routines to call into
+ * such extended assembler routines, though we will have to use a
+ * different return code in that case (1, 2, or 4, rather than -EFAULT).
+ */
+extern struct __get_user __get_user_1(const void *);
+extern struct __get_user __get_user_2(const void *);
+extern struct __get_user __get_user_4(const void *);
+extern struct __get_user __get_user_8(const void *);
+extern int __put_user_1(long, void *);
+extern int __put_user_2(long, void *);
+extern int __put_user_4(long, void *);
+extern int __put_user_8(long long, void *);
+
+/* Unimplemented routines to cause linker failures */
+extern struct __get_user __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
+ * Careful: we have to cast the result to the type of the pointer
+ * for sign reasons.
+ */
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ */
+#define __get_user(x, ptr) \
+({ struct __get_user __ret; \
+ __typeof__(*(ptr)) const __user *__gu_addr = (ptr); \
+ __chk_user_ptr(__gu_addr); \
+ switch (sizeof(*(__gu_addr))) { \
+ case 1: \
+ __ret = __get_user_1(__gu_addr); \
+ break; \
+ case 2: \
+ __ret = __get_user_2(__gu_addr); \
+ break; \
+ case 4: \
+ __ret = __get_user_4(__gu_addr); \
+ break; \
+ case 8: \
+ __ret = __get_user_8(__gu_addr); \
+ break; \
+ default: \
+ __ret = __get_user_bad(); \
+ break; \
+ } \
+ (x) = (__typeof__(*__gu_addr)) (__typeof__(*__gu_addr - *__gu_addr)) \
+ __ret.val; \
+ __ret.err; \
+})
+
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ *
+ * Implementation note: The "case 8" logic of casting to the type of
+ * the result of subtracting the value from itself is basically a way
+ * of keeping all integer types the same, but casting any pointers to
+ * ptrdiff_t, i.e. also an integer type. This way there are no
+ * questionable casts seen by the compiler on an ILP32 platform.
+ */
+#define __put_user(x, ptr) \
+({ \
+ int __pu_err = 0; \
+ __typeof__(*(ptr)) __user *__pu_addr = (ptr); \
+ typeof(*__pu_addr) __pu_val = (x); \
+ __chk_user_ptr(__pu_addr); \
+ switch (sizeof(__pu_val)) { \
+ case 1: \
+ __pu_err = __put_user_1((long)__pu_val, __pu_addr); \
+ break; \
+ case 2: \
+ __pu_err = __put_user_2((long)__pu_val, __pu_addr); \
+ break; \
+ case 4: \
+ __pu_err = __put_user_4((long)__pu_val, __pu_addr); \
+ break; \
+ case 8: \
+ __pu_err = \
+ __put_user_8((__typeof__(__pu_val - __pu_val))__pu_val,\
+ __pu_addr); \
+ break; \
+ default: \
+ __pu_err = __put_user_bad(); \
+ break; \
+ } \
+ __pu_err; \
+})
+
+/*
+ * The versions of get_user and put_user without initial underscores
+ * check the address of their arguments to make sure they are not
+ * in kernel space.
+ */
+#define put_user(x, ptr) \
+({ \
+ __typeof__(*(ptr)) __user *__Pu_addr = (ptr); \
+ access_ok(VERIFY_WRITE, (__Pu_addr), sizeof(*(__Pu_addr))) ? \
+ __put_user((x), (__Pu_addr)) : \
+ -EFAULT; \
+})
+
+#define get_user(x, ptr) \
+({ \
+ __typeof__(*(ptr)) const __user *__Gu_addr = (ptr); \
+ access_ok(VERIFY_READ, (__Gu_addr), sizeof(*(__Gu_addr))) ? \
+ __get_user((x), (__Gu_addr)) : \
+ ((x) = 0, -EFAULT); \
+})
+
+/**
+ * __copy_to_user() - copy data into user space, with less checking.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from kernel space to user space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * An alternate version - __copy_to_user_inatomic() - is designed
+ * to be called from atomic context, typically bracketed by calls
+ * to pagefault_disable() and pagefault_enable().
+ */
+extern unsigned long __must_check __copy_to_user_inatomic(
+ void __user *to, const void *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ might_fault();
+ return __copy_to_user_inatomic(to, from, n);
+}
+
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n))
+ n = __copy_to_user(to, from, n);
+ return n;
+}
+
+/**
+ * __copy_from_user() - copy data from user space, with less checking.
+ * @to: Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to kernel space. Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ *
+ * An alternate version - __copy_from_user_inatomic() - is designed
+ * to be called from atomic context, typically bracketed by calls
+ * to pagefault_disable() and pagefault_enable(). This version
+ * does *NOT* pad with zeros.
+ */
+extern unsigned long __must_check __copy_from_user_inatomic(
+ void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_from_user_zeroing(
+ void *to, const void __user *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ might_fault();
+ return __copy_from_user_zeroing(to, from, n);
+}
+
+static inline unsigned long __must_check
+_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+ if (access_ok(VERIFY_READ, from, n))
+ n = __copy_from_user(to, from, n);
+ else
+ memset(to, 0, n);
+ return n;
+}
+
+#ifdef CONFIG_DEBUG_COPY_FROM_USER
+extern void copy_from_user_overflow(void)
+ __compiletime_warning("copy_from_user() size is not provably correct");
+
+static inline unsigned long __must_check copy_from_user(void *to,
+ const void __user *from,
+ unsigned long n)
+{
+ int sz = __compiletime_object_size(to);
+
+ if (likely(sz == -1 || sz >= n))
+ n = _copy_from_user(to, from, n);
+ else
+ copy_from_user_overflow();
+
+ return n;
+}
+#else
+#define copy_from_user _copy_from_user
+#endif
+
+#ifdef __tilegx__
+/**
+ * __copy_in_user() - copy data within user space, with less checking.
+ * @to: Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n: Number of bytes to copy.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Copy data from user space to user space. Caller must check
+ * the specified blocks with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+extern unsigned long __copy_in_user_asm(
+ void __user *to, const void __user *from, unsigned long n);
+
+static inline unsigned long __must_check
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+ might_sleep();
+ return __copy_in_user_asm(to, from, n);
+}
+
+static inline unsigned long __must_check
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+ if (access_ok(VERIFY_WRITE, to, n) && access_ok(VERIFY_READ, from, n))
+ n = __copy_in_user(to, from, n);
+ return n;
+}
+#endif
+
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+extern long strnlen_user_asm(const char __user *str, long n);
+static inline long __must_check strnlen_user(const char __user *str, long n)
+{
+ might_fault();
+ return strnlen_user_asm(str, n);
+}
+#define strlen_user(str) strnlen_user(str, LONG_MAX)
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace, with less checking.
+ * @dst: Destination address, in kernel space. This buffer must be at
+ * least @count bytes long.
+ * @src: Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ * Caller must check the specified block with access_ok() before calling
+ * this function.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+extern long strncpy_from_user_asm(char *dst, const char __user *src, long);
+static inline long __must_check __strncpy_from_user(
+ char *dst, const char __user *src, long count)
+{
+ might_fault();
+ return strncpy_from_user_asm(dst, src, count);
+}
+static inline long __must_check strncpy_from_user(
+ char *dst, const char __user *src, long count)
+{
+ if (access_ok(VERIFY_READ, src, 1))
+ return __strncpy_from_user(dst, src, count);
+ return -EFAULT;
+}
+
+/**
+ * clear_user: - Zero a block of memory in user space.
+ * @mem: Destination address, in user space.
+ * @len: Number of bytes to zero.
+ *
+ * Zero a block of memory in user space.
+ *
+ * Returns number of bytes that could not be cleared.
+ * On success, this will be zero.
+ */
+extern unsigned long clear_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __clear_user(
+ void __user *mem, unsigned long len)
+{
+ might_fault();
+ return clear_user_asm(mem, len);
+}
+static inline unsigned long __must_check clear_user(
+ void __user *mem, unsigned long len)
+{
+ if (access_ok(VERIFY_WRITE, mem, len))
+ return __clear_user(mem, len);
+ return len;
+}
+
+/**
+ * flush_user: - Flush a block of memory in user space from cache.
+ * @mem: Destination address, in user space.
+ * @len: Number of bytes to flush.
+ *
+ * Returns number of bytes that could not be flushed.
+ * On success, this will be zero.
+ */
+extern unsigned long flush_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __flush_user(
+ void __user *mem, unsigned long len)
+{
+ int retval;
+
+ might_fault();
+ retval = flush_user_asm(mem, len);
+ mb_incoherent();
+ return retval;
+}
+
+static inline unsigned long __must_check flush_user(
+ void __user *mem, unsigned long len)
+{
+ if (access_ok(VERIFY_WRITE, mem, len))
+ return __flush_user(mem, len);
+ return len;
+}
+
+/**
+ * inv_user: - Invalidate a block of memory in user space from cache.
+ * @mem: Destination address, in user space.
+ * @len: Number of bytes to invalidate.
+ *
+ * Returns number of bytes that could not be invalidated.
+ * On success, this will be zero.
+ *
+ * Note that on Tile64, the "inv" operation is in fact a
+ * "flush and invalidate", so cache write-backs will occur prior
+ * to the cache being marked invalid.
+ */
+extern unsigned long inv_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __inv_user(
+ void __user *mem, unsigned long len)
+{
+ int retval;
+
+ might_fault();
+ retval = inv_user_asm(mem, len);
+ mb_incoherent();
+ return retval;
+}
+static inline unsigned long __must_check inv_user(
+ void __user *mem, unsigned long len)
+{
+ if (access_ok(VERIFY_WRITE, mem, len))
+ return __inv_user(mem, len);
+ return len;
+}
+
+/**
+ * finv_user: - Flush-inval a block of memory in user space from cache.
+ * @mem: Destination address, in user space.
+ * @len: Number of bytes to invalidate.
+ *
+ * Returns number of bytes that could not be flush-invalidated.
+ * On success, this will be zero.
+ */
+extern unsigned long finv_user_asm(void __user *mem, unsigned long len);
+static inline unsigned long __must_check __finv_user(
+ void __user *mem, unsigned long len)
+{
+ int retval;
+
+ might_fault();
+ retval = finv_user_asm(mem, len);
+ mb_incoherent();
+ return retval;
+}
+static inline unsigned long __must_check finv_user(
+ void __user *mem, unsigned long len)
+{
+ if (access_ok(VERIFY_WRITE, mem, len))
+ return __finv_user(mem, len);
+ return len;
+}
+
+#endif /* _ASM_TILE_UACCESS_H */
diff --git a/arch/tile/include/asm/ucontext.h b/arch/tile/include/asm/ucontext.h
new file mode 100644
index 000000000000..9bc07b9f30fb
--- /dev/null
+++ b/arch/tile/include/asm/ucontext.h
@@ -0,0 +1 @@
+#include <asm-generic/ucontext.h>
diff --git a/arch/tile/include/asm/unaligned.h b/arch/tile/include/asm/unaligned.h
new file mode 100644
index 000000000000..137e2de5b102
--- /dev/null
+++ b/arch/tile/include/asm/unaligned.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _ASM_TILE_UNALIGNED_H
+#define _ASM_TILE_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned __get_unaligned_le
+#define put_unaligned __put_unaligned_le
+
+#endif /* _ASM_TILE_UNALIGNED_H */
diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h
new file mode 100644
index 000000000000..03b3d5d665dd
--- /dev/null
+++ b/arch/tile/include/asm/unistd.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL)
+#define _ASM_TILE_UNISTD_H
+
+
+#ifndef __LP64__
+/* Use the flavor of this syscall that matches the 32-bit API better. */
+#define __ARCH_WANT_SYNC_FILE_RANGE2
+#endif
+
+/* Use the standard ABI for syscalls. */
+#include <asm-generic/unistd.h>
+
+#ifndef __tilegx__
+/* "Fast" syscalls provide atomic support for 32-bit chips. */
+#define __NR_FAST_cmpxchg -1
+#define __NR_FAST_atomic_update -2
+#define __NR_FAST_cmpxchg64 -3
+#define __NR_cmpxchg_badaddr (__NR_arch_specific_syscall + 0)
+__SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr)
+#endif
+
+/* Additional Tilera-specific syscalls. */
+#define __NR_flush_cache (__NR_arch_specific_syscall + 1)
+__SYSCALL(__NR_flush_cache, sys_flush_cache)
+
+#ifdef __KERNEL__
+/* In compat mode, we use sys_llseek() for compat_sys_llseek(). */
+#ifdef CONFIG_COMPAT
+#define __ARCH_WANT_SYS_LLSEEK
+#endif
+#endif
+
+#endif /* _ASM_TILE_UNISTD_H */
diff --git a/arch/tile/include/asm/user.h b/arch/tile/include/asm/user.h
new file mode 100644
index 000000000000..cbc8b4d5a5ce
--- /dev/null
+++ b/arch/tile/include/asm/user.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef _ASM_TILE_USER_H
+#define _ASM_TILE_USER_H
+
+/* This header is for a.out file formats, which TILE does not support. */
+
+#endif /* _ASM_TILE_USER_H */
diff --git a/arch/tile/include/asm/xor.h b/arch/tile/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/tile/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/tile/include/hv/drv_pcie_rc_intf.h b/arch/tile/include/hv/drv_pcie_rc_intf.h
new file mode 100644
index 000000000000..9bd2243bece0
--- /dev/null
+++ b/arch/tile/include/hv/drv_pcie_rc_intf.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drv_pcie_rc_intf.h
+ * Interface definitions for the PCIE Root Complex.
+ */
+
+#ifndef _SYS_HV_DRV_PCIE_RC_INTF_H
+#define _SYS_HV_DRV_PCIE_RC_INTF_H
+
+/** File offset for reading the interrupt base number used for PCIE legacy
+ interrupts and PLX Gen 1 requirement flag */
+#define PCIE_RC_CONFIG_MASK_OFF 0
+
+
+/**
+ * Structure used for obtaining PCIe config information, read from the PCIE
+ * subsystem /ctl file at initialization
+ */
+typedef struct pcie_rc_config
+{
+ int intr; /**< interrupt number used for downcall */
+ int plx_gen1; /**< flag for PLX Gen 1 configuration */
+} pcie_rc_config_t;
+
+#endif /* _SYS_HV_DRV_PCIE_RC_INTF_H */
diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h
new file mode 100644
index 000000000000..84b31551080a
--- /dev/null
+++ b/arch/tile/include/hv/hypervisor.h
@@ -0,0 +1,2366 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file hypervisor.h
+ * The hypervisor's public API.
+ */
+
+#ifndef _TILE_HV_H
+#define _TILE_HV_H
+
+#ifdef __tile__
+#include <arch/chip.h>
+#else
+/* HACK: Allow use by "tools/cpack/". */
+#include "install/include/arch/chip.h"
+#endif
+
+/* Linux builds want unsigned long constants, but assembler wants numbers */
+#ifdef __ASSEMBLER__
+/** One, for assembler */
+#define __HV_SIZE_ONE 1
+#elif !defined(__tile__) && CHIP_VA_WIDTH() > 32
+/** One, for 64-bit on host */
+#define __HV_SIZE_ONE 1ULL
+#else
+/** One, for Linux */
+#define __HV_SIZE_ONE 1UL
+#endif
+
+
+/** The log2 of the span of a level-1 page table, in bytes.
+ */
+#define HV_LOG2_L1_SPAN 32
+
+/** The span of a level-1 page table, in bytes.
+ */
+#define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN)
+
+/** The log2 of the size of small pages, in bytes. This value should
+ * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ */
+#define HV_LOG2_PAGE_SIZE_SMALL 16
+
+/** The size of small pages, in bytes. This value should be verified
+ * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL).
+ */
+#define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL)
+
+/** The log2 of the size of large pages, in bytes. This value should be
+ * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ */
+#define HV_LOG2_PAGE_SIZE_LARGE 24
+
+/** The size of large pages, in bytes. This value should be verified
+ * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE).
+ */
+#define HV_PAGE_SIZE_LARGE (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_LARGE)
+
+/** The log2 of the granularity at which page tables must be aligned;
+ * in other words, the CPA for a page table must have this many zero
+ * bits at the bottom of the address.
+ */
+#define HV_LOG2_PAGE_TABLE_ALIGN 11
+
+/** The granularity at which page tables must be aligned.
+ */
+#define HV_PAGE_TABLE_ALIGN (__HV_SIZE_ONE << HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Normal start of hypervisor glue in client physical memory. */
+#define HV_GLUE_START_CPA 0x10000
+
+/** This much space is reserved at HV_GLUE_START_CPA
+ * for the hypervisor glue. The client program must start at
+ * some address higher than this, and in particular the address of
+ * its text section should be equal to zero modulo HV_PAGE_SIZE_LARGE
+ * so that relative offsets to the HV glue are correct.
+ */
+#define HV_GLUE_RESERVED_SIZE 0x10000
+
+/** Each entry in the hv dispatch array takes this many bytes. */
+#define HV_DISPATCH_ENTRY_SIZE 32
+
+/** Version of the hypervisor interface defined by this file */
+#define _HV_VERSION 10
+
+/* Index into hypervisor interface dispatch code blocks.
+ *
+ * Hypervisor calls are invoked from user space by calling code
+ * at an address HV_BASE_ADDRESS + (index) * HV_DISPATCH_ENTRY_SIZE,
+ * where index is one of these enum values.
+ *
+ * Normally a supervisor is expected to produce a set of symbols
+ * starting at HV_BASE_ADDRESS that obey this convention, but a user
+ * program could call directly through function pointers if desired.
+ *
+ * These numbers are part of the binary API and will not be changed
+ * without updating HV_VERSION, which should be a rare event.
+ */
+
+/** reserved. */
+#define _HV_DISPATCH_RESERVED 0
+
+/** hv_init */
+#define HV_DISPATCH_INIT 1
+
+/** hv_install_context */
+#define HV_DISPATCH_INSTALL_CONTEXT 2
+
+/** hv_sysconf */
+#define HV_DISPATCH_SYSCONF 3
+
+/** hv_get_rtc */
+#define HV_DISPATCH_GET_RTC 4
+
+/** hv_set_rtc */
+#define HV_DISPATCH_SET_RTC 5
+
+/** hv_flush_asid */
+#define HV_DISPATCH_FLUSH_ASID 6
+
+/** hv_flush_page */
+#define HV_DISPATCH_FLUSH_PAGE 7
+
+/** hv_flush_pages */
+#define HV_DISPATCH_FLUSH_PAGES 8
+
+/** hv_restart */
+#define HV_DISPATCH_RESTART 9
+
+/** hv_halt */
+#define HV_DISPATCH_HALT 10
+
+/** hv_power_off */
+#define HV_DISPATCH_POWER_OFF 11
+
+/** hv_inquire_physical */
+#define HV_DISPATCH_INQUIRE_PHYSICAL 12
+
+/** hv_inquire_memory_controller */
+#define HV_DISPATCH_INQUIRE_MEMORY_CONTROLLER 13
+
+/** hv_inquire_virtual */
+#define HV_DISPATCH_INQUIRE_VIRTUAL 14
+
+/** hv_inquire_asid */
+#define HV_DISPATCH_INQUIRE_ASID 15
+
+/** hv_nanosleep */
+#define HV_DISPATCH_NANOSLEEP 16
+
+/** hv_console_read_if_ready */
+#define HV_DISPATCH_CONSOLE_READ_IF_READY 17
+
+/** hv_console_write */
+#define HV_DISPATCH_CONSOLE_WRITE 18
+
+/** hv_downcall_dispatch */
+#define HV_DISPATCH_DOWNCALL_DISPATCH 19
+
+/** hv_inquire_topology */
+#define HV_DISPATCH_INQUIRE_TOPOLOGY 20
+
+/** hv_fs_findfile */
+#define HV_DISPATCH_FS_FINDFILE 21
+
+/** hv_fs_fstat */
+#define HV_DISPATCH_FS_FSTAT 22
+
+/** hv_fs_pread */
+#define HV_DISPATCH_FS_PREAD 23
+
+/** hv_physaddr_read64 */
+#define HV_DISPATCH_PHYSADDR_READ64 24
+
+/** hv_physaddr_write64 */
+#define HV_DISPATCH_PHYSADDR_WRITE64 25
+
+/** hv_get_command_line */
+#define HV_DISPATCH_GET_COMMAND_LINE 26
+
+/** hv_set_caching */
+#define HV_DISPATCH_SET_CACHING 27
+
+/** hv_bzero_page */
+#define HV_DISPATCH_BZERO_PAGE 28
+
+/** hv_register_message_state */
+#define HV_DISPATCH_REGISTER_MESSAGE_STATE 29
+
+/** hv_send_message */
+#define HV_DISPATCH_SEND_MESSAGE 30
+
+/** hv_receive_message */
+#define HV_DISPATCH_RECEIVE_MESSAGE 31
+
+/** hv_inquire_context */
+#define HV_DISPATCH_INQUIRE_CONTEXT 32
+
+/** hv_start_all_tiles */
+#define HV_DISPATCH_START_ALL_TILES 33
+
+/** hv_dev_open */
+#define HV_DISPATCH_DEV_OPEN 34
+
+/** hv_dev_close */
+#define HV_DISPATCH_DEV_CLOSE 35
+
+/** hv_dev_pread */
+#define HV_DISPATCH_DEV_PREAD 36
+
+/** hv_dev_pwrite */
+#define HV_DISPATCH_DEV_PWRITE 37
+
+/** hv_dev_poll */
+#define HV_DISPATCH_DEV_POLL 38
+
+/** hv_dev_poll_cancel */
+#define HV_DISPATCH_DEV_POLL_CANCEL 39
+
+/** hv_dev_preada */
+#define HV_DISPATCH_DEV_PREADA 40
+
+/** hv_dev_pwritea */
+#define HV_DISPATCH_DEV_PWRITEA 41
+
+/** hv_flush_remote */
+#define HV_DISPATCH_FLUSH_REMOTE 42
+
+/** hv_console_putc */
+#define HV_DISPATCH_CONSOLE_PUTC 43
+
+/** hv_inquire_tiles */
+#define HV_DISPATCH_INQUIRE_TILES 44
+
+/** hv_confstr */
+#define HV_DISPATCH_CONFSTR 45
+
+/** hv_reexec */
+#define HV_DISPATCH_REEXEC 46
+
+/** hv_set_command_line */
+#define HV_DISPATCH_SET_COMMAND_LINE 47
+
+/** hv_dev_register_intr_state */
+#define HV_DISPATCH_DEV_REGISTER_INTR_STATE 48
+
+/** hv_enable_intr */
+#define HV_DISPATCH_ENABLE_INTR 49
+
+/** hv_disable_intr */
+#define HV_DISPATCH_DISABLE_INTR 50
+
+/** hv_trigger_ipi */
+#define HV_DISPATCH_TRIGGER_IPI 51
+
+/** hv_store_mapping */
+#define HV_DISPATCH_STORE_MAPPING 52
+
+/** hv_inquire_realpa */
+#define HV_DISPATCH_INQUIRE_REALPA 53
+
+/** hv_flush_all */
+#define HV_DISPATCH_FLUSH_ALL 54
+
+/** One more than the largest dispatch value */
+#define _HV_DISPATCH_END 55
+
+
+#ifndef __ASSEMBLER__
+
+#ifdef __KERNEL__
+#include <asm/types.h>
+typedef u32 __hv32; /**< 32-bit value */
+typedef u64 __hv64; /**< 64-bit value */
+#else
+#include <stdint.h>
+typedef uint32_t __hv32; /**< 32-bit value */
+typedef uint64_t __hv64; /**< 64-bit value */
+#endif
+
+
+/** Hypervisor physical address. */
+typedef __hv64 HV_PhysAddr;
+
+#if CHIP_VA_WIDTH() > 32
+/** Hypervisor virtual address. */
+typedef __hv64 HV_VirtAddr;
+#else
+/** Hypervisor virtual address. */
+typedef __hv32 HV_VirtAddr;
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Hypervisor ASID. */
+typedef unsigned int HV_ASID;
+
+/** Hypervisor tile location for a memory access
+ * ("location overridden target").
+ */
+typedef unsigned int HV_LOTAR;
+
+/** Hypervisor size of a page. */
+typedef unsigned long HV_PageSize;
+
+/** A page table entry.
+ */
+typedef struct
+{
+ __hv64 val; /**< Value of PTE */
+} HV_PTE;
+
+/** Hypervisor error code. */
+typedef int HV_Errno;
+
+#endif /* !__ASSEMBLER__ */
+
+#define HV_OK 0 /**< No error */
+#define HV_EINVAL -801 /**< Invalid argument */
+#define HV_ENODEV -802 /**< No such device */
+#define HV_ENOENT -803 /**< No such file or directory */
+#define HV_EBADF -804 /**< Bad file number */
+#define HV_EFAULT -805 /**< Bad address */
+#define HV_ERECIP -806 /**< Bad recipients */
+#define HV_E2BIG -807 /**< Message too big */
+#define HV_ENOTSUP -808 /**< Service not supported */
+#define HV_EBUSY -809 /**< Device busy */
+#define HV_ENOSYS -810 /**< Invalid syscall */
+#define HV_EPERM -811 /**< No permission */
+#define HV_ENOTREADY -812 /**< Device not ready */
+#define HV_EIO -813 /**< I/O error */
+#define HV_ENOMEM -814 /**< Out of memory */
+
+#define HV_ERR_MAX -801 /**< Largest HV error code */
+#define HV_ERR_MIN -814 /**< Smallest HV error code */
+
+#ifndef __ASSEMBLER__
+
+/** Pass HV_VERSION to hv_init to request this version of the interface. */
+typedef enum { HV_VERSION = _HV_VERSION } HV_VersionNumber;
+
+/** Initializes the hypervisor.
+ *
+ * @param interface_version_number The version of the hypervisor interface
+ * that this program expects, typically HV_VERSION.
+ * @param chip_num Architecture number of the chip the client was built for.
+ * @param chip_rev_num Revision number of the chip the client was built for.
+ */
+void hv_init(HV_VersionNumber interface_version_number,
+ int chip_num, int chip_rev_num);
+
+
+/** Queries we can make for hv_sysconf().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+ /** An invalid value; do not use. */
+ _HV_SYSCONF_RESERVED = 0,
+
+ /** The length of the glue section containing the hv_ procs, in bytes. */
+ HV_SYSCONF_GLUE_SIZE = 1,
+
+ /** The size of small pages, in bytes. */
+ HV_SYSCONF_PAGE_SIZE_SMALL = 2,
+
+ /** The size of large pages, in bytes. */
+ HV_SYSCONF_PAGE_SIZE_LARGE = 3,
+
+ /** Processor clock speed, in hertz. */
+ HV_SYSCONF_CPU_SPEED = 4,
+
+ /** Processor temperature, in degrees Kelvin. The value
+ * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees
+ * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates
+ * that the temperature has hit an upper limit and is no longer being
+ * accurately tracked.
+ */
+ HV_SYSCONF_CPU_TEMP = 5,
+
+ /** Board temperature, in degrees Kelvin. The value
+ * HV_SYSCONF_TEMP_KTOC may be subtracted from this to get degrees
+ * Celsius. If that Celsius value is HV_SYSCONF_OVERTEMP, this indicates
+ * that the temperature has hit an upper limit and is no longer being
+ * accurately tracked.
+ */
+ HV_SYSCONF_BOARD_TEMP = 6
+
+} HV_SysconfQuery;
+
+/** Offset to subtract from returned Kelvin temperature to get degrees
+ Celsius. */
+#define HV_SYSCONF_TEMP_KTOC 273
+
+/** Pseudo-temperature value indicating that the temperature has
+ * pegged at its upper limit and is no longer accurate; note that this is
+ * the value after subtracting HV_SYSCONF_TEMP_KTOC. */
+#define HV_SYSCONF_OVERTEMP 999
+
+/** Query a configuration value from the hypervisor.
+ * @param query Which value is requested (HV_SYSCONF_xxx).
+ * @return The requested value, or -1 the requested value is illegal or
+ * unavailable.
+ */
+long hv_sysconf(HV_SysconfQuery query);
+
+
+/** Queries we can make for hv_confstr().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+ /** An invalid value; do not use. */
+ _HV_CONFSTR_RESERVED = 0,
+
+ /** Board part number. */
+ HV_CONFSTR_BOARD_PART_NUM = 1,
+
+ /** Board serial number. */
+ HV_CONFSTR_BOARD_SERIAL_NUM = 2,
+
+ /** Chip serial number. */
+ HV_CONFSTR_CHIP_SERIAL_NUM = 3,
+
+ /** Board revision level. */
+ HV_CONFSTR_BOARD_REV = 4,
+
+ /** Hypervisor software version. */
+ HV_CONFSTR_HV_SW_VER = 5,
+
+ /** The name for this chip model. */
+ HV_CONFSTR_CHIP_MODEL = 6,
+
+ /** Human-readable board description. */
+ HV_CONFSTR_BOARD_DESC = 7,
+
+ /** Human-readable description of the hypervisor configuration. */
+ HV_CONFSTR_HV_CONFIG = 8,
+
+ /** Human-readable version string for the boot image (for instance,
+ * who built it and when, what configuration file was used). */
+ HV_CONFSTR_HV_CONFIG_VER = 9,
+
+ /** Mezzanine part number. */
+ HV_CONFSTR_MEZZ_PART_NUM = 10,
+
+ /** Mezzanine serial number. */
+ HV_CONFSTR_MEZZ_SERIAL_NUM = 11,
+
+ /** Mezzanine revision level. */
+ HV_CONFSTR_MEZZ_REV = 12,
+
+ /** Human-readable mezzanine description. */
+ HV_CONFSTR_MEZZ_DESC = 13,
+
+ /** Control path for the onboard network switch. */
+ HV_CONFSTR_SWITCH_CONTROL = 14,
+
+ /** Chip revision level. */
+ HV_CONFSTR_CHIP_REV = 15
+
+} HV_ConfstrQuery;
+
+/** Query a configuration string from the hypervisor.
+ *
+ * @param query Identifier for the specific string to be retrieved
+ * (HV_CONFSTR_xxx).
+ * @param buf Buffer in which to place the string.
+ * @param len Length of the buffer.
+ * @return If query is valid, then the length of the corresponding string,
+ * including the trailing null; if this is greater than len, the string
+ * was truncated. If query is invalid, HV_EINVAL. If the specified
+ * buffer is not writable by the client, HV_EFAULT.
+ */
+int hv_confstr(HV_ConfstrQuery query, HV_VirtAddr buf, int len);
+
+/** State object used to enable and disable one-shot and level-sensitive
+ * interrupts. */
+typedef struct
+{
+#if CHIP_VA_WIDTH() > 32
+ __hv64 opaque[2]; /**< No user-serviceable parts inside */
+#else
+ __hv32 opaque[2]; /**< No user-serviceable parts inside */
+#endif
+}
+HV_IntrState;
+
+/** A set of interrupts. */
+typedef __hv32 HV_IntrMask;
+
+/** Tile coordinate */
+typedef struct
+{
+ /** X coordinate, relative to supervisor's top-left coordinate */
+ int x;
+
+ /** Y coordinate, relative to supervisor's top-left coordinate */
+ int y;
+} HV_Coord;
+
+/** The low interrupt numbers are reserved for use by the client in
+ * delivering IPIs. Any interrupt numbers higher than this value are
+ * reserved for use by HV device drivers. */
+#define HV_MAX_IPI_INTERRUPT 7
+
+/** Register an interrupt state object. This object is used to enable and
+ * disable one-shot and level-sensitive interrupts. Once the state is
+ * registered, the client must not read or write the state object; doing
+ * so will cause undefined results.
+ *
+ * @param intr_state Pointer to interrupt state object.
+ * @return HV_OK on success, or a hypervisor error code.
+ */
+HV_Errno hv_dev_register_intr_state(HV_IntrState* intr_state);
+
+/** Enable a set of one-shot and level-sensitive interrupts.
+ *
+ * @param intr_state Pointer to interrupt state object.
+ * @param enab_mask Bitmap of interrupts to enable.
+ */
+void hv_enable_intr(HV_IntrState* intr_state, HV_IntrMask enab_mask);
+
+/** Disable a set of one-shot and level-sensitive interrupts.
+ *
+ * @param intr_state Pointer to interrupt state object.
+ * @param disab_mask Bitmap of interrupts to disable.
+ */
+void hv_disable_intr(HV_IntrState* intr_state, HV_IntrMask disab_mask);
+
+/** Trigger a one-shot interrupt on some tile
+ *
+ * @param tile Which tile to interrupt.
+ * @param interrupt Interrupt number to trigger; must be between 0 and
+ * HV_MAX_IPI_INTERRUPT.
+ * @return HV_OK on success, or a hypervisor error code.
+ */
+HV_Errno hv_trigger_ipi(HV_Coord tile, int interrupt);
+
+/** Store memory mapping in debug memory so that external debugger can read it.
+ * A maximum of 16 entries can be stored.
+ *
+ * @param va VA of memory that is mapped.
+ * @param len Length of mapped memory.
+ * @param pa PA of memory that is mapped.
+ * @return 0 on success, -1 if the maximum number of mappings is exceeded.
+ */
+int hv_store_mapping(HV_VirtAddr va, unsigned int len, HV_PhysAddr pa);
+
+/** Given a client PA and a length, return its real (HV) PA.
+ *
+ * @param cpa Client physical address.
+ * @param len Length of mapped memory.
+ * @return physical address, or -1 if cpa or len is not valid.
+ */
+HV_PhysAddr hv_inquire_realpa(HV_PhysAddr cpa, unsigned int len);
+
+/** RTC return flag for no RTC chip present.
+ */
+#define HV_RTC_NO_CHIP 0x1
+
+/** RTC return flag for low-voltage condition, indicating that battery had
+ * died and time read is unreliable.
+ */
+#define HV_RTC_LOW_VOLTAGE 0x2
+
+/** Date/Time of day */
+typedef struct {
+#if CHIP_WORD_SIZE() > 32
+ __hv64 tm_sec; /**< Seconds, 0-59 */
+ __hv64 tm_min; /**< Minutes, 0-59 */
+ __hv64 tm_hour; /**< Hours, 0-23 */
+ __hv64 tm_mday; /**< Day of month, 0-30 */
+ __hv64 tm_mon; /**< Month, 0-11 */
+ __hv64 tm_year; /**< Years since 1900, 0-199 */
+ __hv64 flags; /**< Return flags, 0 if no error */
+#else
+ __hv32 tm_sec; /**< Seconds, 0-59 */
+ __hv32 tm_min; /**< Minutes, 0-59 */
+ __hv32 tm_hour; /**< Hours, 0-23 */
+ __hv32 tm_mday; /**< Day of month, 0-30 */
+ __hv32 tm_mon; /**< Month, 0-11 */
+ __hv32 tm_year; /**< Years since 1900, 0-199 */
+ __hv32 flags; /**< Return flags, 0 if no error */
+#endif
+} HV_RTCTime;
+
+/** Read the current time-of-day clock.
+ * @return HV_RTCTime of current time (GMT).
+ */
+HV_RTCTime hv_get_rtc(void);
+
+
+/** Set the current time-of-day clock.
+ * @param time time to reset time-of-day to (GMT).
+ */
+void hv_set_rtc(HV_RTCTime time);
+
+/** Installs a context, comprising a page table and other attributes.
+ *
+ * Once this service completes, page_table will be used to translate
+ * subsequent virtual address references to physical memory.
+ *
+ * Installing a context does not cause an implicit TLB flush. Before
+ * reusing an ASID value for a different address space, the client is
+ * expected to flush old references from the TLB with hv_flush_asid().
+ * (Alternately, hv_flush_all() may be used to flush many ASIDs at once.)
+ * After invalidating a page table entry, changing its attributes, or
+ * changing its target CPA, the client is expected to flush old references
+ * from the TLB with hv_flush_page() or hv_flush_pages(). Making a
+ * previously invalid page valid does not require a flush.
+ *
+ * Specifying an invalid ASID, or an invalid CPA (client physical address)
+ * (either as page_table_pointer, or within the referenced table),
+ * or another page table data item documented as above as illegal may
+ * lead to client termination; since the validation of the table is
+ * done as needed, this may happen before the service returns, or at
+ * some later time, or never, depending upon the client's pattern of
+ * memory references. Page table entries which supply translations for
+ * invalid virtual addresses may result in client termination, or may
+ * be silently ignored. "Invalid" in this context means a value which
+ * was not provided to the client via the appropriate hv_inquire_* routine.
+ *
+ * To support changing the instruction VAs at the same time as
+ * installing the new page table, this call explicitly supports
+ * setting the "lr" register to a different address and then jumping
+ * directly to the hv_install_context() routine. In this case, the
+ * new page table does not need to contain any mapping for the
+ * hv_install_context address itself.
+ *
+ * @param page_table Root of the page table.
+ * @param access PTE providing info on how to read the page table. This
+ * value must be consistent between multiple tiles sharing a page table,
+ * and must also be consistent with any virtual mappings the client
+ * may be using to access the page table.
+ * @param asid HV_ASID the page table is to be used for.
+ * @param flags Context flags, denoting attributes or privileges of the
+ * current context (HV_CTX_xxx).
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_install_context(HV_PhysAddr page_table, HV_PTE access, HV_ASID asid,
+ __hv32 flags);
+
+#endif /* !__ASSEMBLER__ */
+
+#define HV_CTX_DIRECTIO 0x1 /**< Direct I/O requests are accepted from
+ PL0. */
+
+#ifndef __ASSEMBLER__
+
+/** Value returned from hv_inquire_context(). */
+typedef struct
+{
+ /** Physical address of page table */
+ HV_PhysAddr page_table;
+
+ /** PTE which defines access method for top of page table */
+ HV_PTE access;
+
+ /** ASID associated with this page table */
+ HV_ASID asid;
+
+ /** Context flags */
+ __hv32 flags;
+} HV_Context;
+
+/** Retrieve information about the currently installed context.
+ * @return The data passed to the last successful hv_install_context call.
+ */
+HV_Context hv_inquire_context(void);
+
+
+/** Flushes all translations associated with the named address space
+ * identifier from the TLB and any other hypervisor data structures.
+ * Translations installed with the "global" bit are not flushed.
+ *
+ * Specifying an invalid ASID may lead to client termination. "Invalid"
+ * in this context means a value which was not provided to the client
+ * via <tt>hv_inquire_asid()</tt>.
+ *
+ * @param asid HV_ASID whose entries are to be flushed.
+ * @return Zero on success, or a hypervisor error code on failure.
+*/
+int hv_flush_asid(HV_ASID asid);
+
+
+/** Flushes all translations associated with the named virtual address
+ * and page size from the TLB and other hypervisor data structures. Only
+ * pages visible to the current ASID are affected; note that this includes
+ * global pages in addition to pages specific to the current ASID.
+ *
+ * The supplied VA need not be aligned; it may be anywhere in the
+ * subject page.
+ *
+ * Specifying an invalid virtual address may lead to client termination,
+ * or may silently succeed. "Invalid" in this context means a value
+ * which was not provided to the client via hv_inquire_virtual.
+ *
+ * @param address Address of the page to flush.
+ * @param page_size Size of pages to assume.
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_flush_page(HV_VirtAddr address, HV_PageSize page_size);
+
+
+/** Flushes all translations associated with the named virtual address range
+ * and page size from the TLB and other hypervisor data structures. Only
+ * pages visible to the current ASID are affected; note that this includes
+ * global pages in addition to pages specific to the current ASID.
+ *
+ * The supplied VA need not be aligned; it may be anywhere in the
+ * subject page.
+ *
+ * Specifying an invalid virtual address may lead to client termination,
+ * or may silently succeed. "Invalid" in this context means a value
+ * which was not provided to the client via hv_inquire_virtual.
+ *
+ * @param start Address to flush.
+ * @param page_size Size of pages to assume.
+ * @param size The number of bytes to flush. Any page in the range
+ * [start, start + size) will be flushed from the TLB.
+ * @return Zero on success, or a hypervisor error code on failure.
+ */
+int hv_flush_pages(HV_VirtAddr start, HV_PageSize page_size,
+ unsigned long size);
+
+
+/** Flushes all non-global translations (if preserve_global is true),
+ * or absolutely all translations (if preserve_global is false).
+ *
+ * @param preserve_global Non-zero if we want to preserve "global" mappings.
+ * @return Zero on success, or a hypervisor error code on failure.
+*/
+int hv_flush_all(int preserve_global);
+
+
+/** Restart machine with optional restart command and optional args.
+ * @param cmd Const pointer to command to restart with, or NULL
+ * @param args Const pointer to argument string to restart with, or NULL
+ */
+void hv_restart(HV_VirtAddr cmd, HV_VirtAddr args);
+
+
+/** Halt machine. */
+void hv_halt(void);
+
+
+/** Power off machine. */
+void hv_power_off(void);
+
+
+/** Re-enter virtual-is-physical memory translation mode and restart
+ * execution at a given address.
+ * @param entry Client physical address at which to begin execution.
+ * @return A hypervisor error code on failure; if the operation is
+ * successful the call does not return.
+ */
+int hv_reexec(HV_PhysAddr entry);
+
+
+/** Chip topology */
+typedef struct
+{
+ /** Relative coordinates of the querying tile */
+ HV_Coord coord;
+
+ /** Width of the querying supervisor's tile rectangle. */
+ int width;
+
+ /** Height of the querying supervisor's tile rectangle. */
+ int height;
+
+} HV_Topology;
+
+/** Returns information about the tile coordinate system.
+ *
+ * Each supervisor is given a rectangle of tiles it potentially controls.
+ * These tiles are labeled using a relative coordinate system with (0,0) as
+ * the upper left tile regardless of their physical location on the chip.
+ *
+ * This call returns both the size of that rectangle and the position
+ * within that rectangle of the querying tile.
+ *
+ * Not all tiles within that rectangle may be available to the supervisor;
+ * to get the precise set of available tiles, you must also call
+ * hv_inquire_tiles(HV_INQ_TILES_AVAIL, ...).
+ **/
+HV_Topology hv_inquire_topology(void);
+
+/** Sets of tiles we can retrieve with hv_inquire_tiles().
+ *
+ * These numbers are part of the binary API and guaranteed not to change.
+ */
+typedef enum {
+ /** An invalid value; do not use. */
+ _HV_INQ_TILES_RESERVED = 0,
+
+ /** All available tiles within the supervisor's tile rectangle. */
+ HV_INQ_TILES_AVAIL = 1,
+
+ /** The set of tiles used for hash-for-home caching. */
+ HV_INQ_TILES_HFH_CACHE = 2,
+
+ /** The set of tiles that can be legally used as a LOTAR for a PTE. */
+ HV_INQ_TILES_LOTAR = 3
+} HV_InqTileSet;
+
+/** Returns specific information about various sets of tiles within the
+ * supervisor's tile rectangle.
+ *
+ * @param set Which set of tiles to retrieve.
+ * @param cpumask Pointer to a returned bitmask (in row-major order,
+ * supervisor-relative) of tiles. The low bit of the first word
+ * corresponds to the tile at the upper left-hand corner of the
+ * supervisor's rectangle. In order for the supervisor to know the
+ * buffer length to supply, it should first call hv_inquire_topology.
+ * @param length Number of bytes available for the returned bitmask.
+ **/
+HV_Errno hv_inquire_tiles(HV_InqTileSet set, HV_VirtAddr cpumask, int length);
+
+
+/** An identifier for a memory controller. Multiple memory controllers
+ * may be connected to one chip, and this uniquely identifies each one.
+ */
+typedef int HV_MemoryController;
+
+/** A range of physical memory. */
+typedef struct
+{
+ HV_PhysAddr start; /**< Starting address. */
+ __hv64 size; /**< Size in bytes. */
+ HV_MemoryController controller; /**< Which memory controller owns this. */
+} HV_PhysAddrRange;
+
+/** Returns information about a range of physical memory.
+ *
+ * hv_inquire_physical() returns one of the ranges of client
+ * physical addresses which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values. Ranges
+ * are ordered by increasing start address (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available memory is described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ *
+ * Some clients might not be prepared to deal with more than one
+ * physical address range; they still ought to call this routine and
+ * issue a warning message if they're given more than one range, on the
+ * theory that whoever configured the hypervisor to provide that memory
+ * should know that it's being wasted.
+ */
+HV_PhysAddrRange hv_inquire_physical(int idx);
+
+
+/** Memory controller information. */
+typedef struct
+{
+ HV_Coord coord; /**< Relative tile coordinates of the port used by a
+ specified tile to communicate with this controller. */
+ __hv64 speed; /**< Speed of this controller in bytes per second. */
+} HV_MemoryControllerInfo;
+
+/** Returns information about a particular memory controller.
+ *
+ * hv_inquire_memory_controller(coord,idx) returns information about a
+ * particular controller. Two pieces of information are returned:
+ * - The relative coordinates of the port on the controller that the specified
+ * tile would use to contact it. The relative coordinates may lie
+ * outside the supervisor's rectangle, i.e. the controller may not
+ * be attached to a node managed by the querying node's supervisor.
+ * In particular note that x or y may be negative.
+ * - The speed of the memory controller. (This is a not-to-exceed value
+ * based on the raw hardware data rate, and may not be achievable in
+ * practice; it is provided to give clients information on the relative
+ * performance of the available controllers.)
+ *
+ * Clients should avoid calling this interface with invalid values.
+ * A client who does may be terminated.
+ * @param coord Tile for which to calculate the relative port position.
+ * @param controller Index of the controller; identical to value returned
+ * from other routines like hv_inquire_physical.
+ * @return Information about the controller.
+ */
+HV_MemoryControllerInfo hv_inquire_memory_controller(HV_Coord coord,
+ int controller);
+
+
+/** A range of virtual memory. */
+typedef struct
+{
+ HV_VirtAddr start; /**< Starting address. */
+ __hv64 size; /**< Size in bytes. */
+} HV_VirtAddrRange;
+
+/** Returns information about a range of virtual memory.
+ *
+ * hv_inquire_virtual() returns one of the ranges of client
+ * virtual addresses which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values. Ranges
+ * are ordered by increasing start address (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available memory is described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ *
+ * Some clients may well have various virtual addresses hardwired
+ * into themselves; for instance, their instruction stream may
+ * have been compiled expecting to live at a particular address.
+ * Such clients should use this interface to verify they've been
+ * given the virtual address space they expect, and issue a (potentially
+ * fatal) warning message otherwise.
+ *
+ * Note that the returned size is a __hv64, not a __hv32, so it is
+ * possible to express a single range spanning the entire 32-bit
+ * address space.
+ */
+HV_VirtAddrRange hv_inquire_virtual(int idx);
+
+
+/** A range of ASID values. */
+typedef struct
+{
+ HV_ASID start; /**< First ASID in the range. */
+ unsigned int size; /**< Number of ASIDs. Zero for an invalid range. */
+} HV_ASIDRange;
+
+/** Returns information about a range of ASIDs.
+ *
+ * hv_inquire_asid() returns one of the ranges of address
+ * space identifiers which are available to this client.
+ *
+ * The first range is retrieved by specifying an idx of 0, and
+ * successive ranges are returned with subsequent idx values. Ranges
+ * are ordered by increasing start value (i.e., as idx increases,
+ * so does start), do not overlap, and do not touch (i.e., the
+ * available ASIDs are described with the fewest possible ranges).
+ *
+ * If an out-of-range idx value is specified, the returned size will be zero.
+ * A client can count the number of ranges by increasing idx until the
+ * returned size is zero. There will always be at least one valid range.
+ */
+HV_ASIDRange hv_inquire_asid(int idx);
+
+
+/** Waits for at least the specified number of nanoseconds then returns.
+ *
+ * @param nanosecs The number of nanoseconds to sleep.
+ */
+void hv_nanosleep(int nanosecs);
+
+
+/** Reads a character from the console without blocking.
+ *
+ * @return A value from 0-255 indicates the value successfully read.
+ * A negative value means no value was ready.
+ */
+int hv_console_read_if_ready(void);
+
+
+/** Writes a character to the console, blocking if the console is busy.
+ *
+ * This call cannot fail. If the console is broken for some reason,
+ * output will simply vanish.
+ * @param byte Character to write.
+ */
+void hv_console_putc(int byte);
+
+
+/** Writes a string to the console, blocking if the console is busy.
+ * @param bytes Pointer to characters to write.
+ * @param len Number of characters to write.
+ * @return Number of characters written, or HV_EFAULT if the buffer is invalid.
+ */
+int hv_console_write(HV_VirtAddr bytes, int len);
+
+
+/** Dispatch the next interrupt from the client downcall mechanism.
+ *
+ * The hypervisor uses downcalls to notify the client of asynchronous
+ * events. Some of these events are hypervisor-created (like incoming
+ * messages). Some are regular interrupts which initially occur in
+ * the hypervisor, and are normally handled directly by the client;
+ * when these occur in a client's interrupt critical section, they must
+ * be delivered through the downcall mechanism.
+ *
+ * A downcall is initially delivered to the client as an INTCTRL_1
+ * interrupt. Upon entry to the INTCTRL_1 vector, the client must
+ * immediately invoke the hv_downcall_dispatch service. This service
+ * will not return; instead it will cause one of the client's actual
+ * downcall-handling interrupt vectors to be entered. The EX_CONTEXT
+ * registers in the client will be set so that when the client irets,
+ * it will return to the code which was interrupted by the INTCTRL_1
+ * interrupt.
+ *
+ * Any saving of registers should be done by the actual handling
+ * vectors; no registers should be changed by the INTCTRL_1 handler.
+ * In particular, the client should not use a jal instruction to invoke
+ * the hv_downcall_dispatch service, as that would overwrite the client's
+ * lr register. Note that the hv_downcall_dispatch service may overwrite
+ * one or more of the client's system save registers.
+ *
+ * The client must not modify the INTCTRL_1_STATUS SPR. The hypervisor
+ * will set this register to cause a downcall to happen, and will clear
+ * it when no further downcalls are pending.
+ *
+ * When a downcall vector is entered, the INTCTRL_1 interrupt will be
+ * masked. When the client is done processing a downcall, and is ready
+ * to accept another, it must unmask this interrupt; if more downcalls
+ * are pending, this will cause the INTCTRL_1 vector to be reentered.
+ * Currently the following interrupt vectors can be entered through a
+ * downcall:
+ *
+ * INT_MESSAGE_RCV_DWNCL (hypervisor message available)
+ * INT_DMATLB_MISS_DWNCL (DMA TLB miss)
+ * INT_SNITLB_MISS_DWNCL (SNI TLB miss)
+ * INT_DMATLB_ACCESS_DWNCL (DMA TLB access violation)
+ */
+void hv_downcall_dispatch(void);
+
+#endif /* !__ASSEMBLER__ */
+
+/** We use actual interrupt vectors which never occur (they're only there
+ * to allow setting MPLs for related SPRs) for our downcall vectors.
+ */
+/** Message receive downcall interrupt vector */
+#define INT_MESSAGE_RCV_DWNCL INT_BOOT_ACCESS
+/** DMA TLB miss downcall interrupt vector */
+#define INT_DMATLB_MISS_DWNCL INT_DMA_ASID
+/** Static nework processor instruction TLB miss interrupt vector */
+#define INT_SNITLB_MISS_DWNCL INT_SNI_ASID
+/** DMA TLB access violation downcall interrupt vector */
+#define INT_DMATLB_ACCESS_DWNCL INT_DMA_CPL
+/** Device interrupt downcall interrupt vector */
+#define INT_DEV_INTR_DWNCL INT_WORLD_ACCESS
+
+#ifndef __ASSEMBLER__
+
+/** Requests the inode for a specific full pathname.
+ *
+ * Performs a lookup in the hypervisor filesystem for a given filename.
+ * Multiple calls with the same filename will always return the same inode.
+ * If there is no such filename, HV_ENOENT is returned.
+ * A bad filename pointer may result in HV_EFAULT instead.
+ *
+ * @param filename Constant pointer to name of requested file
+ * @return Inode of requested file
+ */
+int hv_fs_findfile(HV_VirtAddr filename);
+
+
+/** Data returned from an fstat request.
+ * Note that this structure should be no more than 40 bytes in size so
+ * that it can always be returned completely in registers.
+ */
+typedef struct
+{
+ int size; /**< Size of file (or HV_Errno on error) */
+ unsigned int flags; /**< Flags (see HV_FS_FSTAT_FLAGS) */
+} HV_FS_StatInfo;
+
+/** Bitmask flags for fstat request */
+typedef enum
+{
+ HV_FS_ISDIR = 0x0001 /**< Is the entry a directory? */
+} HV_FS_FSTAT_FLAGS;
+
+/** Get stat information on a given file inode.
+ *
+ * Return information on the file with the given inode.
+ *
+ * IF the HV_FS_ISDIR bit is set, the "file" is a directory. Reading
+ * it will return NUL-separated filenames (no directory part) relative
+ * to the path to the inode of the directory "file". These can be
+ * appended to the path to the directory "file" after a forward slash
+ * to create additional filenames. Note that it is not required
+ * that all valid paths be decomposable into valid parent directories;
+ * a filesystem may validly have just a few files, none of which have
+ * HV_FS_ISDIR set. However, if clients may wish to enumerate the
+ * files in the filesystem, it is recommended to include all the
+ * appropriate parent directory "files" to give a consistent view.
+ *
+ * An invalid file inode will cause an HV_EBADF error to be returned.
+ *
+ * @param inode The inode number of the query
+ * @return An HV_FS_StatInfo structure
+ */
+HV_FS_StatInfo hv_fs_fstat(int inode);
+
+
+/** Read data from a specific hypervisor file.
+ * On error, may return HV_EBADF for a bad inode or HV_EFAULT for a bad buf.
+ * Reads near the end of the file will return fewer bytes than requested.
+ * Reads at or beyond the end of a file will return zero.
+ *
+ * @param inode the hypervisor file to read
+ * @param buf the buffer to read data into
+ * @param length the number of bytes of data to read
+ * @param offset the offset into the file to read the data from
+ * @return number of bytes successfully read, or an HV_Errno code
+ */
+int hv_fs_pread(int inode, HV_VirtAddr buf, int length, int offset);
+
+
+/** Read a 64-bit word from the specified physical address.
+ * The address must be 8-byte aligned.
+ * Specifying an invalid physical address will lead to client termination.
+ * @param addr The physical address to read
+ * @param access The PTE describing how to read the memory
+ * @return The 64-bit value read from the given address
+ */
+unsigned long long hv_physaddr_read64(HV_PhysAddr addr, HV_PTE access);
+
+
+/** Write a 64-bit word to the specified physical address.
+ * The address must be 8-byte aligned.
+ * Specifying an invalid physical address will lead to client termination.
+ * @param addr The physical address to write
+ * @param access The PTE that says how to write the memory
+ * @param val The 64-bit value to write to the given address
+ */
+void hv_physaddr_write64(HV_PhysAddr addr, HV_PTE access,
+ unsigned long long val);
+
+
+/** Get the value of the command-line for the supervisor, if any.
+ * This will not include the filename of the booted supervisor, but may
+ * include configured-in boot arguments or the hv_restart() arguments.
+ * If the buffer is not long enough the hypervisor will NUL the first
+ * character of the buffer but not write any other data.
+ * @param buf The virtual address to write the command-line string to.
+ * @param length The length of buf, in characters.
+ * @return The actual length of the command line, including the trailing NUL
+ * (may be larger than "length").
+ */
+int hv_get_command_line(HV_VirtAddr buf, int length);
+
+
+/** Set a new value for the command-line for the supervisor, which will
+ * be returned from subsequent invocations of hv_get_command_line() on
+ * this tile.
+ * @param buf The virtual address to read the command-line string from.
+ * @param length The length of buf, in characters; must be no more than
+ * HV_COMMAND_LINE_LEN.
+ * @return Zero if successful, or a hypervisor error code.
+ */
+HV_Errno hv_set_command_line(HV_VirtAddr buf, int length);
+
+/** Maximum size of a command line passed to hv_set_command_line(); note
+ * that a line returned from hv_get_command_line() could be larger than
+ * this.*/
+#define HV_COMMAND_LINE_LEN 256
+
+/** Tell the hypervisor how to cache non-priority pages
+ * (its own as well as pages explicitly represented in page tables).
+ * Normally these will be represented as red/black pages, but
+ * when the supervisor starts to allocate "priority" pages in the PTE
+ * the hypervisor will need to start marking those pages as (e.g.) "red"
+ * and non-priority pages as either "black" (if they cache-alias
+ * with the existing priority pages) or "red/black" (if they don't).
+ * The bitmask provides information on which parts of the cache
+ * have been used for pinned pages so far on this tile; if (1 << N)
+ * appears in the bitmask, that indicates that a page has been marked
+ * "priority" whose PFN equals N, mod 8.
+ * @param bitmask A bitmap of priority page set values
+ */
+void hv_set_caching(unsigned int bitmask);
+
+
+/** Zero out a specified number of pages.
+ * The va and size must both be multiples of 4096.
+ * Caches are bypassed and memory is directly set to zero.
+ * This API is implemented only in the magic hypervisor and is intended
+ * to provide a performance boost to the minimal supervisor by
+ * giving it a fast way to zero memory pages when allocating them.
+ * @param va Virtual address where the page has been mapped
+ * @param size Number of bytes (must be a page size multiple)
+ */
+void hv_bzero_page(HV_VirtAddr va, unsigned int size);
+
+
+/** State object for the hypervisor messaging subsystem. */
+typedef struct
+{
+#if CHIP_VA_WIDTH() > 32
+ __hv64 opaque[2]; /**< No user-serviceable parts inside */
+#else
+ __hv32 opaque[2]; /**< No user-serviceable parts inside */
+#endif
+}
+HV_MsgState;
+
+/** Register to receive incoming messages.
+ *
+ * This routine configures the current tile so that it can receive
+ * incoming messages. It must be called before the client can receive
+ * messages with the hv_receive_message routine, and must be called on
+ * each tile which will receive messages.
+ *
+ * msgstate is the virtual address of a state object of type HV_MsgState.
+ * Once the state is registered, the client must not read or write the
+ * state object; doing so will cause undefined results.
+ *
+ * If this routine is called with msgstate set to 0, the client's message
+ * state will be freed and it will no longer be able to receive messages.
+ * Note that this may cause the loss of any as-yet-undelivered messages
+ * for the client.
+ *
+ * If another client attempts to send a message to a client which has
+ * not yet called hv_register_message_state, or which has freed its
+ * message state, the message will not be delivered, as if the client
+ * had insufficient buffering.
+ *
+ * This routine returns HV_OK if the registration was successful, and
+ * HV_EINVAL if the supplied state object is unsuitable. Note that some
+ * errors may not be detected during this routine, but might be detected
+ * during a subsequent message delivery.
+ * @param msgstate State object.
+ **/
+HV_Errno hv_register_message_state(HV_MsgState* msgstate);
+
+/** Possible message recipient states. */
+typedef enum
+{
+ HV_TO_BE_SENT, /**< Not sent (not attempted, or recipient not ready) */
+ HV_SENT, /**< Successfully sent */
+ HV_BAD_RECIP /**< Bad recipient coordinates (permanent error) */
+} HV_Recip_State;
+
+/** Message recipient. */
+typedef struct
+{
+ /** X coordinate, relative to supervisor's top-left coordinate */
+ unsigned int x:11;
+
+ /** Y coordinate, relative to supervisor's top-left coordinate */
+ unsigned int y:11;
+
+ /** Status of this recipient */
+ HV_Recip_State state:10;
+} HV_Recipient;
+
+/** Send a message to a set of recipients.
+ *
+ * This routine sends a message to a set of recipients.
+ *
+ * recips is an array of HV_Recipient structures. Each specifies a tile,
+ * and a message state; initially, it is expected that the state will
+ * be set to HV_TO_BE_SENT. nrecip specifies the number of recipients
+ * in the recips array.
+ *
+ * For each recipient whose state is HV_TO_BE_SENT, the hypervisor attempts
+ * to send that tile the specified message. In order to successfully
+ * receive the message, the receiver must be a valid tile to which the
+ * sender has access, must not be the sending tile itself, and must have
+ * sufficient free buffer space. (The hypervisor guarantees that each
+ * tile which has called hv_register_message_state() will be able to
+ * buffer one message from every other tile which can legally send to it;
+ * more space may be provided but is not guaranteed.) If an invalid tile
+ * is specified, the recipient's state is set to HV_BAD_RECIP; this is a
+ * permanent delivery error. If the message is successfully delivered
+ * to the recipient's buffer, the recipient's state is set to HV_SENT.
+ * Otherwise, the recipient's state is unchanged. Message delivery is
+ * synchronous; all attempts to send messages are completed before this
+ * routine returns.
+ *
+ * If no permanent delivery errors were encountered, the routine returns
+ * the number of messages successfully sent: that is, the number of
+ * recipients whose states changed from HV_TO_BE_SENT to HV_SENT during
+ * this operation. If any permanent delivery errors were encountered,
+ * the routine returns HV_ERECIP. In the event of permanent delivery
+ * errors, it may be the case that delivery was not attempted to all
+ * recipients; if any messages were succesfully delivered, however,
+ * recipients' state values will be updated appropriately.
+ *
+ * It is explicitly legal to specify a recipient structure whose state
+ * is not HV_TO_BE_SENT; such a recipient is ignored. One suggested way
+ * of using hv_send_message to send a message to multiple tiles is to set
+ * up a list of recipients, and then call the routine repeatedly with the
+ * same list, each time accumulating the number of messages successfully
+ * sent, until all messages are sent, a permanent error is encountered,
+ * or the desired number of attempts have been made. When used in this
+ * way, the routine will deliver each message no more than once to each
+ * recipient.
+ *
+ * Note that a message being successfully delivered to the recipient's
+ * buffer space does not guarantee that it is received by the recipient,
+ * either immediately or at any time in the future; the recipient might
+ * never call hv_receive_message, or could register a different state
+ * buffer, losing the message.
+ *
+ * Specifiying the same recipient more than once in the recipient list
+ * is an error, which will not result in an error return but which may
+ * or may not result in more than one message being delivered to the
+ * recipient tile.
+ *
+ * buf and buflen specify the message to be sent. buf is a virtual address
+ * which must be currently mapped in the client's page table; if not, the
+ * routine returns HV_EFAULT. buflen must be greater than zero and less
+ * than or equal to HV_MAX_MESSAGE_SIZE, and nrecip must be less than the
+ * number of tiles to which the sender has access; if not, the routine
+ * returns HV_EINVAL.
+ * @param recips List of recipients.
+ * @param nrecip Number of recipients.
+ * @param buf Address of message data.
+ * @param buflen Length of message data.
+ **/
+int hv_send_message(HV_Recipient *recips, int nrecip,
+ HV_VirtAddr buf, int buflen);
+
+/** Maximum hypervisor message size, in bytes */
+#define HV_MAX_MESSAGE_SIZE 28
+
+
+/** Return value from hv_receive_message() */
+typedef struct
+{
+ int msglen; /**< Message length in bytes, or an error code */
+ __hv32 source; /**< Code identifying message sender (HV_MSG_xxx) */
+} HV_RcvMsgInfo;
+
+#define HV_MSG_TILE 0x0 /**< Message source is another tile */
+#define HV_MSG_INTR 0x1 /**< Message source is a driver interrupt */
+
+/** Receive a message.
+ *
+ * This routine retrieves a message from the client's incoming message
+ * buffer.
+ *
+ * Multiple messages sent from a particular sending tile to a particular
+ * receiving tile are received in the order that they were sent; however,
+ * no ordering is guaranteed between messages sent by different tiles.
+ *
+ * Whenever the a client's message buffer is empty, the first message
+ * subsequently received will cause the client's MESSAGE_RCV_DWNCL
+ * interrupt vector to be invoked through the interrupt downcall mechanism
+ * (see the description of the hv_downcall_dispatch() routine for details
+ * on downcalls).
+ *
+ * Another message-available downcall will not occur until a call to
+ * this routine is made when the message buffer is empty, and a message
+ * subsequently arrives. Note that such a downcall could occur while
+ * this routine is executing. If the calling code does not wish this
+ * to happen, it is recommended that this routine be called with the
+ * INTCTRL_1 interrupt masked, or inside an interrupt critical section.
+ *
+ * msgstate is the value previously passed to hv_register_message_state().
+ * buf is the virtual address of the buffer into which the message will
+ * be written; buflen is the length of the buffer.
+ *
+ * This routine returns an HV_RcvMsgInfo structure. The msglen member
+ * of that structure is the length of the message received, zero if no
+ * message is available, or HV_E2BIG if the message is too large for the
+ * specified buffer. If the message is too large, it is not consumed,
+ * and may be retrieved by a subsequent call to this routine specifying
+ * a sufficiently large buffer. A buffer which is HV_MAX_MESSAGE_SIZE
+ * bytes long is guaranteed to be able to receive any possible message.
+ *
+ * The source member of the HV_RcvMsgInfo structure describes the sender
+ * of the message. For messages sent by another client tile via an
+ * hv_send_message() call, this value is HV_MSG_TILE; for messages sent
+ * as a result of a device interrupt, this value is HV_MSG_INTR.
+ */
+
+HV_RcvMsgInfo hv_receive_message(HV_MsgState msgstate, HV_VirtAddr buf,
+ int buflen);
+
+
+/** Start remaining tiles owned by this supervisor. Initially, only one tile
+ * executes the client program; after it calls this service, the other tiles
+ * are started. This allows the initial tile to do one-time configuration
+ * of shared data structures without having to lock them against simultaneous
+ * access.
+ */
+void hv_start_all_tiles(void);
+
+
+/** Open a hypervisor device.
+ *
+ * This service initializes an I/O device and its hypervisor driver software,
+ * and makes it available for use. The open operation is per-device per-chip;
+ * once it has been performed, the device handle returned may be used in other
+ * device services calls made by any tile.
+ *
+ * @param name Name of the device. A base device name is just a text string
+ * (say, "pcie"). If there is more than one instance of a device, the
+ * base name is followed by a slash and a device number (say, "pcie/0").
+ * Some devices may support further structure beneath those components;
+ * most notably, devices which require control operations do so by
+ * supporting reads and/or writes to a control device whose name
+ * includes a trailing "/ctl" (say, "pcie/0/ctl").
+ * @param flags Flags (HV_DEV_xxx).
+ * @return A positive integer device handle, or a negative error code.
+ */
+int hv_dev_open(HV_VirtAddr name, __hv32 flags);
+
+
+/** Close a hypervisor device.
+ *
+ * This service uninitializes an I/O device and its hypervisor driver
+ * software, and makes it unavailable for use. The close operation is
+ * per-device per-chip; once it has been performed, the device is no longer
+ * available. Normally there is no need to ever call the close service.
+ *
+ * @param devhdl Device handle of the device to be closed.
+ * @return Zero if the close is successful, otherwise, a negative error code.
+ */
+int hv_dev_close(int devhdl);
+
+
+/** Read data from a hypervisor device synchronously.
+ *
+ * This service transfers data from a hypervisor device to a memory buffer.
+ * When the service returns, the data has been written from the memory buffer,
+ * and the buffer will not be further modified by the driver.
+ *
+ * No ordering is guaranteed between requests issued from different tiles.
+ *
+ * Devices may choose to support both the synchronous and asynchronous read
+ * operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param va Virtual address of the target data buffer. This buffer must
+ * be mapped in the currently installed page table; if not, HV_EFAULT
+ * may be returned.
+ * @param len Number of bytes to be transferred.
+ * @param offset Driver-dependent offset. For a random-access device, this is
+ * often a byte offset from the beginning of the device; in other cases,
+ * like on a control device, it may have a different meaning.
+ * @return A non-negative value if the read was at least partially successful;
+ * otherwise, a negative error code. The precise interpretation of
+ * the return value is driver-dependent, but many drivers will return
+ * the number of bytes successfully transferred.
+ */
+int hv_dev_pread(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len,
+ __hv64 offset);
+
+#define HV_DEV_NB_EMPTY 0x1 /**< Don't block when no bytes of data can
+ be transferred. */
+#define HV_DEV_NB_PARTIAL 0x2 /**< Don't block when some bytes, but not all
+ of the requested bytes, can be
+ transferred. */
+#define HV_DEV_NOCACHE 0x4 /**< The caller warrants that none of the
+ cache lines which might contain data
+ from the requested buffer are valid.
+ Useful with asynchronous operations
+ only. */
+
+#define HV_DEV_ALLFLAGS (HV_DEV_NB_EMPTY | HV_DEV_NB_PARTIAL | \
+ HV_DEV_NOCACHE) /**< All HV_DEV_xxx flags */
+
+/** Write data to a hypervisor device synchronously.
+ *
+ * This service transfers data from a memory buffer to a hypervisor device.
+ * When the service returns, the data has been read from the memory buffer,
+ * and the buffer may be overwritten by the client; the data may not
+ * necessarily have been conveyed to the actual hardware I/O interface.
+ *
+ * No ordering is guaranteed between requests issued from different tiles.
+ *
+ * Devices may choose to support both the synchronous and asynchronous write
+ * operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be written to.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param va Virtual address of the source data buffer. This buffer must
+ * be mapped in the currently installed page table; if not, HV_EFAULT
+ * may be returned.
+ * @param len Number of bytes to be transferred.
+ * @param offset Driver-dependent offset. For a random-access device, this is
+ * often a byte offset from the beginning of the device; in other cases,
+ * like on a control device, it may have a different meaning.
+ * @return A non-negative value if the write was at least partially successful;
+ * otherwise, a negative error code. The precise interpretation of
+ * the return value is driver-dependent, but many drivers will return
+ * the number of bytes successfully transferred.
+ */
+int hv_dev_pwrite(int devhdl, __hv32 flags, HV_VirtAddr va, __hv32 len,
+ __hv64 offset);
+
+
+/** Interrupt arguments, used in the asynchronous I/O interfaces. */
+#if CHIP_VA_WIDTH() > 32
+typedef __hv64 HV_IntArg;
+#else
+typedef __hv32 HV_IntArg;
+#endif
+
+/** Interrupt messages are delivered via the mechanism as normal messages,
+ * but have a message source of HV_DEV_INTR. The message is formatted
+ * as an HV_IntrMsg structure.
+ */
+
+typedef struct
+{
+ HV_IntArg intarg; /**< Interrupt argument, passed to the poll/preada/pwritea
+ services */
+ HV_IntArg intdata; /**< Interrupt-specific interrupt data */
+} HV_IntrMsg;
+
+/** Request an interrupt message when a device condition is satisfied.
+ *
+ * This service requests that an interrupt message be delivered to the
+ * requesting tile when a device becomes readable or writable, or when any
+ * data queued to the device via previous write operations from this tile
+ * has been actually sent out on the hardware I/O interface. Devices may
+ * choose to support any, all, or none of the available conditions.
+ *
+ * If multiple conditions are specified, only one message will be
+ * delivered. If the event mask delivered to that interrupt handler
+ * indicates that some of the conditions have not yet occurred, the
+ * client must issue another poll() call if it wishes to wait for those
+ * conditions.
+ *
+ * Only one poll may be outstanding per device handle per tile. If more than
+ * one tile is polling on the same device and condition, they will all be
+ * notified when it happens. Because of this, clients may not assume that
+ * the condition signaled is necessarily still true when they request a
+ * subsequent service; for instance, the readable data which caused the
+ * poll call to interrupt may have been read by another tile in the interim.
+ *
+ * The notification interrupt message could come directly, or via the
+ * downcall (intctrl1) method, depending on what the tile is doing
+ * when the condition is satisfied. Note that it is possible for the
+ * requested interrupt to be delivered after this service is called but
+ * before it returns.
+ *
+ * @param devhdl Device handle of the device to be polled.
+ * @param events Flags denoting the events which will cause the interrupt to
+ * be delivered (HV_DEVPOLL_xxx).
+ * @param intarg Value which will be delivered as the intarg member of the
+ * eventual interrupt message; the intdata member will be set to a
+ * mask of HV_DEVPOLL_xxx values indicating which conditions have been
+ * satisifed.
+ * @return Zero if the interrupt was successfully scheduled; otherwise, a
+ * negative error code.
+ */
+int hv_dev_poll(int devhdl, __hv32 events, HV_IntArg intarg);
+
+#define HV_DEVPOLL_READ 0x1 /**< Test device for readability */
+#define HV_DEVPOLL_WRITE 0x2 /**< Test device for writability */
+#define HV_DEVPOLL_FLUSH 0x4 /**< Test device for output drained */
+
+
+/** Cancel a request for an interrupt when a device event occurs.
+ *
+ * This service requests that no interrupt be delivered when the events
+ * noted in the last-issued poll() call happen. Once this service returns,
+ * the interrupt has been canceled; however, it is possible for the interrupt
+ * to be delivered after this service is called but before it returns.
+ *
+ * @param devhdl Device handle of the device on which to cancel polling.
+ * @return Zero if the poll was successfully canceled; otherwise, a negative
+ * error code.
+ */
+int hv_dev_poll_cancel(int devhdl);
+
+
+/** Scatter-gather list for preada/pwritea calls. */
+typedef struct
+#if CHIP_VA_WIDTH() <= 32
+__attribute__ ((packed, aligned(4)))
+#endif
+{
+ HV_PhysAddr pa; /**< Client physical address of the buffer segment. */
+ HV_PTE pte; /**< Page table entry describing the caching and location
+ override characteristics of the buffer segment. Some
+ drivers ignore this element and will require that
+ the NOCACHE flag be set on their requests. */
+ __hv32 len; /**< Length of the buffer segment. */
+} HV_SGL;
+
+#define HV_SGL_MAXLEN 16 /**< Maximum number of entries in a scatter-gather
+ list */
+
+/** Read data from a hypervisor device asynchronously.
+ *
+ * This service transfers data from a hypervisor device to a memory buffer.
+ * When the service returns, the read has been scheduled. When the read
+ * completes, an interrupt message will be delivered, and the buffer will
+ * not be further modified by the driver.
+ *
+ * The number of possible outstanding asynchronous requests is defined by
+ * each driver, but it is recommended that it be at least two requests
+ * per tile per device.
+ *
+ * No ordering is guaranteed between synchronous and asynchronous requests,
+ * even those issued on the same tile.
+ *
+ * The completion interrupt message could come directly, or via the downcall
+ * (intctrl1) method, depending on what the tile is doing when the read
+ * completes. Interrupts do not coalesce; one is delivered for each
+ * asynchronous I/O request. Note that it is possible for the requested
+ * interrupt to be delivered after this service is called but before it
+ * returns.
+ *
+ * Devices may choose to support both the synchronous and asynchronous read
+ * operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param sgl_len Number of elements in the scatter-gather list.
+ * @param sgl Scatter-gather list describing the memory to which data will be
+ * written.
+ * @param offset Driver-dependent offset. For a random-access device, this is
+ * often a byte offset from the beginning of the device; in other cases,
+ * like on a control device, it may have a different meaning.
+ * @param intarg Value which will be delivered as the intarg member of the
+ * eventual interrupt message; the intdata member will be set to the
+ * normal return value from the read request.
+ * @return Zero if the read was successfully scheduled; otherwise, a negative
+ * error code. Note that some drivers may choose to pre-validate
+ * their arguments, and may thus detect certain device error
+ * conditions at this time rather than when the completion notification
+ * occurs, but this is not required.
+ */
+int hv_dev_preada(int devhdl, __hv32 flags, __hv32 sgl_len,
+ HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg);
+
+
+/** Write data to a hypervisor device asynchronously.
+ *
+ * This service transfers data from a memory buffer to a hypervisor
+ * device. When the service returns, the write has been scheduled.
+ * When the write completes, an interrupt message will be delivered,
+ * and the buffer may be overwritten by the client; the data may not
+ * necessarily have been conveyed to the actual hardware I/O interface.
+ *
+ * The number of possible outstanding asynchronous requests is defined by
+ * each driver, but it is recommended that it be at least two requests
+ * per tile per device.
+ *
+ * No ordering is guaranteed between synchronous and asynchronous requests,
+ * even those issued on the same tile.
+ *
+ * The completion interrupt message could come directly, or via the downcall
+ * (intctrl1) method, depending on what the tile is doing when the read
+ * completes. Interrupts do not coalesce; one is delivered for each
+ * asynchronous I/O request. Note that it is possible for the requested
+ * interrupt to be delivered after this service is called but before it
+ * returns.
+ *
+ * Devices may choose to support both the synchronous and asynchronous write
+ * operations, only one of them, or neither of them.
+ *
+ * @param devhdl Device handle of the device to be read from.
+ * @param flags Flags (HV_DEV_xxx).
+ * @param sgl_len Number of elements in the scatter-gather list.
+ * @param sgl Scatter-gather list describing the memory from which data will be
+ * read.
+ * @param offset Driver-dependent offset. For a random-access device, this is
+ * often a byte offset from the beginning of the device; in other cases,
+ * like on a control device, it may have a different meaning.
+ * @param intarg Value which will be delivered as the intarg member of the
+ * eventual interrupt message; the intdata member will be set to the
+ * normal return value from the write request.
+ * @return Zero if the write was successfully scheduled; otherwise, a negative
+ * error code. Note that some drivers may choose to pre-validate
+ * their arguments, and may thus detect certain device error
+ * conditions at this time rather than when the completion notification
+ * occurs, but this is not required.
+ */
+int hv_dev_pwritea(int devhdl, __hv32 flags, __hv32 sgl_len,
+ HV_SGL sgl[/* sgl_len */], __hv64 offset, HV_IntArg intarg);
+
+
+/** Define a pair of tile and ASID to identify a user process context. */
+typedef struct
+{
+ /** X coordinate, relative to supervisor's top-left coordinate */
+ unsigned int x:11;
+
+ /** Y coordinate, relative to supervisor's top-left coordinate */
+ unsigned int y:11;
+
+ /** ASID of the process on this x,y tile */
+ HV_ASID asid:10;
+} HV_Remote_ASID;
+
+/** Flush cache and/or TLB state on remote tiles.
+ *
+ * @param cache_pa Client physical address to flush from cache (ignored if
+ * the length encoded in cache_control is zero, or if
+ * HV_FLUSH_EVICT_L2 is set, or if cache_cpumask is NULL).
+ * @param cache_control This argument allows you to specify a length of
+ * physical address space to flush (maximum HV_FLUSH_MAX_CACHE_LEN).
+ * You can "or" in HV_FLUSH_EVICT_L2 to flush the whole L2 cache.
+ * You can "or" in HV_FLUSH_EVICT_LI1 to flush the whole LII cache.
+ * HV_FLUSH_ALL flushes all caches.
+ * @param cache_cpumask Bitmask (in row-major order, supervisor-relative) of
+ * tile indices to perform cache flush on. The low bit of the first
+ * word corresponds to the tile at the upper left-hand corner of the
+ * supervisor's rectangle. If passed as a NULL pointer, equivalent
+ * to an empty bitmask. On chips which support hash-for-home caching,
+ * if passed as -1, equivalent to a mask containing tiles which could
+ * be doing hash-for-home caching.
+ * @param tlb_va Virtual address to flush from TLB (ignored if
+ * tlb_length is zero or tlb_cpumask is NULL).
+ * @param tlb_length Number of bytes of data to flush from the TLB.
+ * @param tlb_pgsize Page size to use for TLB flushes.
+ * tlb_va and tlb_length need not be aligned to this size.
+ * @param tlb_cpumask Bitmask for tlb flush, like cache_cpumask.
+ * If passed as a NULL pointer, equivalent to an empty bitmask.
+ * @param asids Pointer to an HV_Remote_ASID array of tile/ASID pairs to flush.
+ * @param asidcount Number of HV_Remote_ASID entries in asids[].
+ * @return Zero for success, or else HV_EINVAL or HV_EFAULT for errors that
+ * are detected while parsing the arguments.
+ */
+int hv_flush_remote(HV_PhysAddr cache_pa, unsigned long cache_control,
+ unsigned long* cache_cpumask,
+ HV_VirtAddr tlb_va, unsigned long tlb_length,
+ unsigned long tlb_pgsize, unsigned long* tlb_cpumask,
+ HV_Remote_ASID* asids, int asidcount);
+
+/** Include in cache_control to ensure a flush of the entire L2. */
+#define HV_FLUSH_EVICT_L2 (1UL << 31)
+
+/** Include in cache_control to ensure a flush of the entire L1I. */
+#define HV_FLUSH_EVICT_L1I (1UL << 30)
+
+/** Maximum legal size to use for the "length" component of cache_control. */
+#define HV_FLUSH_MAX_CACHE_LEN ((1UL << 30) - 1)
+
+/** Use for cache_control to ensure a flush of all caches. */
+#define HV_FLUSH_ALL -1UL
+
+#else /* __ASSEMBLER__ */
+
+/** Include in cache_control to ensure a flush of the entire L2. */
+#define HV_FLUSH_EVICT_L2 (1 << 31)
+
+/** Include in cache_control to ensure a flush of the entire L1I. */
+#define HV_FLUSH_EVICT_L1I (1 << 30)
+
+/** Maximum legal size to use for the "length" component of cache_control. */
+#define HV_FLUSH_MAX_CACHE_LEN ((1 << 30) - 1)
+
+/** Use for cache_control to ensure a flush of all caches. */
+#define HV_FLUSH_ALL -1
+
+#endif /* __ASSEMBLER__ */
+
+#ifndef __ASSEMBLER__
+
+/** Return a 64-bit value corresponding to the PTE if needed */
+#define hv_pte_val(pte) ((pte).val)
+
+/** Cast a 64-bit value to an HV_PTE */
+#define hv_pte(val) ((HV_PTE) { val })
+
+#endif /* !__ASSEMBLER__ */
+
+
+/** Bits in the size of an HV_PTE */
+#define HV_LOG2_PTE_SIZE 3
+
+/** Size of an HV_PTE */
+#define HV_PTE_SIZE (1 << HV_LOG2_PTE_SIZE)
+
+
+/* Bits in HV_PTE's low word. */
+#define HV_PTE_INDEX_PRESENT 0 /**< PTE is valid */
+#define HV_PTE_INDEX_MIGRATING 1 /**< Page is migrating */
+#define HV_PTE_INDEX_CLIENT0 2 /**< Page client state 0 */
+#define HV_PTE_INDEX_CLIENT1 3 /**< Page client state 1 */
+#define HV_PTE_INDEX_NC 4 /**< L1$/L2$ incoherent with L3$ */
+#define HV_PTE_INDEX_NO_ALLOC_L1 5 /**< Page is uncached in local L1$ */
+#define HV_PTE_INDEX_NO_ALLOC_L2 6 /**< Page is uncached in local L2$ */
+#define HV_PTE_INDEX_CACHED_PRIORITY 7 /**< Page is priority cached */
+#define HV_PTE_INDEX_PAGE 8 /**< PTE describes a page */
+#define HV_PTE_INDEX_GLOBAL 9 /**< Page is global */
+#define HV_PTE_INDEX_USER 10 /**< Page is user-accessible */
+#define HV_PTE_INDEX_ACCESSED 11 /**< Page has been accessed */
+#define HV_PTE_INDEX_DIRTY 12 /**< Page has been written */
+ /* Bits 13-15 are reserved for
+ future use. */
+#define HV_PTE_INDEX_MODE 16 /**< Page mode; see HV_PTE_MODE_xxx */
+#define HV_PTE_MODE_BITS 3 /**< Number of bits in mode */
+ /* Bit 19 is reserved for
+ future use. */
+#define HV_PTE_INDEX_LOTAR 20 /**< Page's LOTAR; must be high bits
+ of word */
+#define HV_PTE_LOTAR_BITS 12 /**< Number of bits in a LOTAR */
+
+/* Bits in HV_PTE's high word. */
+#define HV_PTE_INDEX_READABLE 32 /**< Page is readable */
+#define HV_PTE_INDEX_WRITABLE 33 /**< Page is writable */
+#define HV_PTE_INDEX_EXECUTABLE 34 /**< Page is executable */
+#define HV_PTE_INDEX_PTFN 35 /**< Page's PTFN; must be high bits
+ of word */
+#define HV_PTE_PTFN_BITS 29 /**< Number of bits in a PTFN */
+
+/** Position of the PFN field within the PTE (subset of the PTFN). */
+#define HV_PTE_INDEX_PFN (HV_PTE_INDEX_PTFN + (HV_LOG2_PAGE_SIZE_SMALL - \
+ HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Length of the PFN field within the PTE (subset of the PTFN). */
+#define HV_PTE_INDEX_PFN_BITS (HV_PTE_INDEX_PTFN_BITS - \
+ (HV_LOG2_PAGE_SIZE_SMALL - \
+ HV_LOG2_PAGE_TABLE_ALIGN))
+
+/*
+ * Legal values for the PTE's mode field
+ */
+/** Data is not resident in any caches; loads and stores access memory
+ * directly.
+ */
+#define HV_PTE_MODE_UNCACHED 1
+
+/** Data is resident in the tile's local L1 and/or L2 caches; if a load
+ * or store misses there, it goes to memory.
+ *
+ * The copy in the local L1$/L2$ is not invalidated when the copy in
+ * memory is changed.
+ */
+#define HV_PTE_MODE_CACHE_NO_L3 2
+
+/** Data is resident in the tile's local L1 and/or L2 caches. If a load
+ * or store misses there, it goes to an L3 cache in a designated tile;
+ * if it misses there, it goes to memory.
+ *
+ * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated
+ * when the copy in the remote L3$ is changed. Otherwise, such
+ * invalidation will not occur.
+ *
+ * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support
+ * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is
+ * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode.
+ */
+#define HV_PTE_MODE_CACHE_TILE_L3 3
+
+/** Data is resident in the tile's local L1 and/or L2 caches. If a load
+ * or store misses there, it goes to an L3 cache in one of a set of
+ * designated tiles; if it misses there, it goes to memory. Which tile
+ * is chosen from the set depends upon a hash function applied to the
+ * physical address. This mode is not supported on chips for which
+ * CHIP_HAS_CBOX_HOME_MAP() is 0.
+ *
+ * If the NC bit is not set, the copy in the local L1$/L2$ is invalidated
+ * when the copy in the remote L3$ is changed. Otherwise, such
+ * invalidation will not occur.
+ *
+ * Chips for which CHIP_HAS_COHERENT_LOCAL_CACHE() is 0 do not support
+ * invalidation from an L3$ to another tile's L1$/L2$. If the NC bit is
+ * clear on such a chip, no copy is kept in the local L1$/L2$ in this mode.
+ */
+#define HV_PTE_MODE_CACHE_HASH_L3 4
+
+/** Data is not resident in memory; accesses are instead made to an I/O
+ * device, whose tile coordinates are given by the PTE's LOTAR field.
+ * This mode is only supported on chips for which CHIP_HAS_MMIO() is 1.
+ * The EXECUTABLE bit may not be set in an MMIO PTE.
+ */
+#define HV_PTE_MODE_MMIO 5
+
+
+/* C wants 1ULL so it is typed as __hv64, but the assembler needs just numbers.
+ * The assembler can't handle shifts greater than 31, but treats them
+ * as shifts mod 32, so assembler code must be aware of which word
+ * the bit belongs in when using these macros.
+ */
+#ifdef __ASSEMBLER__
+#define __HV_PTE_ONE 1 /**< One, for assembler */
+#else
+#define __HV_PTE_ONE 1ULL /**< One, for C */
+#endif
+
+/** Is this PTE present?
+ *
+ * If this bit is set, this PTE represents a valid translation or level-2
+ * page table pointer. Otherwise, the page table does not contain a
+ * translation for the subject virtual pages.
+ *
+ * If this bit is not set, the other bits in the PTE are not
+ * interpreted by the hypervisor, and may contain any value.
+ */
+#define HV_PTE_PRESENT (__HV_PTE_ONE << HV_PTE_INDEX_PRESENT)
+
+/** Does this PTE map a page?
+ *
+ * If this bit is set in the level-1 page table, the entry should be
+ * interpreted as a level-2 page table entry mapping a large page.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * In a level-2 page table, this bit is ignored and must be zero.
+ */
+#define HV_PTE_PAGE (__HV_PTE_ONE << HV_PTE_INDEX_PAGE)
+
+/** Is this a global (non-ASID) mapping?
+ *
+ * If this bit is set, the translations established by this PTE will
+ * not be flushed from the TLB by the hv_flush_asid() service; they
+ * will be flushed by the hv_flush_page() or hv_flush_pages() services.
+ *
+ * Setting this bit for translations which are identical in all page
+ * tables (for instance, code and data belonging to a client OS) can
+ * be very beneficial, as it will reduce the number of TLB misses.
+ * Note that, while it is not an error which will be detected by the
+ * hypervisor, it is an extremely bad idea to set this bit for
+ * translations which are _not_ identical in all page tables.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_GLOBAL (__HV_PTE_ONE << HV_PTE_INDEX_GLOBAL)
+
+/** Is this mapping accessible to users?
+ *
+ * If this bit is set, code running at any PL will be permitted to
+ * access the virtual addresses mapped by this PTE. Otherwise, only
+ * code running at PL 1 or above will be allowed to do so.
+ *
+ * This bit should not be modified by the client while PRESENT is set, as
+ * doing so may race with the hypervisor's update of ACCESSED and DIRTY bits.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_USER (__HV_PTE_ONE << HV_PTE_INDEX_USER)
+
+/** Has this mapping been accessed?
+ *
+ * This bit is set by the hypervisor when the memory described by the
+ * translation is accessed for the first time. It is never cleared by
+ * the hypervisor, but may be cleared by the client. After the bit
+ * has been cleared, subsequent references are not guaranteed to set
+ * it again until the translation has been flushed from the TLB.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_ACCESSED (__HV_PTE_ONE << HV_PTE_INDEX_ACCESSED)
+
+/** Is this mapping dirty?
+ *
+ * This bit is set by the hypervisor when the memory described by the
+ * translation is written for the first time. It is never cleared by
+ * the hypervisor, but may be cleared by the client. After the bit
+ * has been cleared, subsequent references are not guaranteed to set
+ * it again until the translation has been flushed from the TLB.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_DIRTY (__HV_PTE_ONE << HV_PTE_INDEX_DIRTY)
+
+/** Migrating bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor. The name is indicative of the suggested use by the client
+ * to tag pages whose L3 cache is being migrated from one cpu to another.
+ */
+#define HV_PTE_MIGRATING (__HV_PTE_ONE << HV_PTE_INDEX_MIGRATING)
+
+/** Client-private bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.
+ */
+#define HV_PTE_CLIENT0 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT0)
+
+/** Client-private bit in PTE.
+ *
+ * This bit is guaranteed not to be inspected or modified by the
+ * hypervisor.
+ */
+#define HV_PTE_CLIENT1 (__HV_PTE_ONE << HV_PTE_INDEX_CLIENT1)
+
+/** Non-coherent (NC) bit in PTE.
+ *
+ * If this bit is set, the mapping that is set up will be non-coherent
+ * (also known as non-inclusive). This means that changes to the L3
+ * cache will not cause a local copy to be invalidated. It is generally
+ * recommended only for read-only mappings.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit determines how the
+ * level-2 page table is accessed.
+ */
+#define HV_PTE_NC (__HV_PTE_ONE << HV_PTE_INDEX_NC)
+
+/** Is this page prevented from filling the L1$?
+ *
+ * If this bit is set, the page described by the PTE will not be cached
+ * the local cpu's L1 cache.
+ *
+ * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip,
+ * it is illegal to use this attribute, and may cause client termination.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit
+ * determines how the level-2 page table is accessed.
+ */
+#define HV_PTE_NO_ALLOC_L1 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L1)
+
+/** Is this page prevented from filling the L2$?
+ *
+ * If this bit is set, the page described by the PTE will not be cached
+ * the local cpu's L2 cache.
+ *
+ * If CHIP_HAS_NC_AND_NOALLOC_BITS() is not true in <chip.h> for this chip,
+ * it is illegal to use this attribute, and may cause client termination.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this bit determines how the
+ * level-2 page table is accessed.
+ */
+#define HV_PTE_NO_ALLOC_L2 (__HV_PTE_ONE << HV_PTE_INDEX_NO_ALLOC_L2)
+
+/** Is this a priority page?
+ *
+ * If this bit is set, the page described by the PTE will be given
+ * priority in the cache. Normally this translates into allowing the
+ * page to use only the "red" half of the cache. The client may wish to
+ * then use the hv_set_caching service to specify that other pages which
+ * alias this page will use only the "black" half of the cache.
+ *
+ * If the Cached Priority bit is clear, the hypervisor uses the
+ * current hv_set_caching() value to choose how to cache the page.
+ *
+ * It is illegal to set the Cached Priority bit if the Non-Cached bit
+ * is set and the Cached Remotely bit is clear, i.e. if requests to
+ * the page map directly to memory.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_CACHED_PRIORITY (__HV_PTE_ONE << \
+ HV_PTE_INDEX_CACHED_PRIORITY)
+
+/** Is this a readable mapping?
+ *
+ * If this bit is set, code will be permitted to read from (e.g.,
+ * issue load instructions against) the virtual addresses mapped by
+ * this PTE.
+ *
+ * It is illegal for this bit to be clear if the Writable bit is set.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_READABLE (__HV_PTE_ONE << HV_PTE_INDEX_READABLE)
+
+/** Is this a writable mapping?
+ *
+ * If this bit is set, code will be permitted to write to (e.g., issue
+ * store instructions against) the virtual addresses mapped by this
+ * PTE.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_WRITABLE (__HV_PTE_ONE << HV_PTE_INDEX_WRITABLE)
+
+/** Is this an executable mapping?
+ *
+ * If this bit is set, code will be permitted to execute from
+ * (e.g., jump to) the virtual addresses mapped by this PTE.
+ *
+ * This bit applies to any processor on the tile, if there are more
+ * than one.
+ *
+ * This bit is ignored in level-1 PTEs unless the Page bit is set.
+ */
+#define HV_PTE_EXECUTABLE (__HV_PTE_ONE << HV_PTE_INDEX_EXECUTABLE)
+
+/** The width of a LOTAR's x or y bitfield. */
+#define HV_LOTAR_WIDTH 11
+
+/** Converts an x,y pair to a LOTAR value. */
+#define HV_XY_TO_LOTAR(x, y) ((HV_LOTAR)(((x) << HV_LOTAR_WIDTH) | (y)))
+
+/** Extracts the X component of a lotar. */
+#define HV_LOTAR_X(lotar) ((lotar) >> HV_LOTAR_WIDTH)
+
+/** Extracts the Y component of a lotar. */
+#define HV_LOTAR_Y(lotar) ((lotar) & ((1 << HV_LOTAR_WIDTH) - 1))
+
+#ifndef __ASSEMBLER__
+
+/** Define accessor functions for a PTE bit. */
+#define _HV_BIT(name, bit) \
+static __inline int \
+hv_pte_get_##name(HV_PTE pte) \
+{ \
+ return (pte.val >> HV_PTE_INDEX_##bit) & 1; \
+} \
+ \
+static __inline HV_PTE \
+hv_pte_set_##name(HV_PTE pte) \
+{ \
+ pte.val |= 1ULL << HV_PTE_INDEX_##bit; \
+ return pte; \
+} \
+ \
+static __inline HV_PTE \
+hv_pte_clear_##name(HV_PTE pte) \
+{ \
+ pte.val &= ~(1ULL << HV_PTE_INDEX_##bit); \
+ return pte; \
+}
+
+/* Generate accessors to get, set, and clear various PTE flags.
+ */
+_HV_BIT(present, PRESENT)
+_HV_BIT(page, PAGE)
+_HV_BIT(client0, CLIENT0)
+_HV_BIT(client1, CLIENT1)
+_HV_BIT(migrating, MIGRATING)
+_HV_BIT(nc, NC)
+_HV_BIT(readable, READABLE)
+_HV_BIT(writable, WRITABLE)
+_HV_BIT(executable, EXECUTABLE)
+_HV_BIT(accessed, ACCESSED)
+_HV_BIT(dirty, DIRTY)
+_HV_BIT(no_alloc_l1, NO_ALLOC_L1)
+_HV_BIT(no_alloc_l2, NO_ALLOC_L2)
+_HV_BIT(cached_priority, CACHED_PRIORITY)
+_HV_BIT(global, GLOBAL)
+_HV_BIT(user, USER)
+
+#undef _HV_BIT
+
+/** Get the page mode from the PTE.
+ *
+ * This field generally determines whether and how accesses to the page
+ * are cached; the HV_PTE_MODE_xxx symbols define the legal values for the
+ * page mode. The NC, NO_ALLOC_L1, and NO_ALLOC_L2 bits modify this
+ * general policy.
+ */
+static __inline unsigned int
+hv_pte_get_mode(const HV_PTE pte)
+{
+ return (((__hv32) pte.val) >> HV_PTE_INDEX_MODE) &
+ ((1 << HV_PTE_MODE_BITS) - 1);
+}
+
+/** Set the page mode into a PTE. See hv_pte_get_mode. */
+static __inline HV_PTE
+hv_pte_set_mode(HV_PTE pte, unsigned int val)
+{
+ pte.val &= ~(((1ULL << HV_PTE_MODE_BITS) - 1) << HV_PTE_INDEX_MODE);
+ pte.val |= val << HV_PTE_INDEX_MODE;
+ return pte;
+}
+
+/** Get the page frame number from the PTE.
+ *
+ * This field contains the upper bits of the CPA (client physical
+ * address) of the target page; the complete CPA is this field with
+ * HV_LOG2_PAGE_SIZE_SMALL zero bits appended to it.
+ *
+ * For PTEs in a level-1 page table where the Page bit is set, the
+ * CPA must be aligned modulo the large page size.
+ */
+static __inline unsigned int
+hv_pte_get_pfn(const HV_PTE pte)
+{
+ return pte.val >> HV_PTE_INDEX_PFN;
+}
+
+
+/** Set the page frame number into a PTE. See hv_pte_get_pfn. */
+static __inline HV_PTE
+hv_pte_set_pfn(HV_PTE pte, unsigned int val)
+{
+ /*
+ * Note that the use of "PTFN" in the next line is intentional; we
+ * don't want any garbage lower bits left in that field.
+ */
+ pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS) - 1) << HV_PTE_INDEX_PTFN);
+ pte.val |= (__hv64) val << HV_PTE_INDEX_PFN;
+ return pte;
+}
+
+/** Get the page table frame number from the PTE.
+ *
+ * This field contains the upper bits of the CPA (client physical
+ * address) of the target page table; the complete CPA is this field with
+ * with HV_PAGE_TABLE_ALIGN zero bits appended to it.
+ *
+ * For PTEs in a level-1 page table when the Page bit is not set, the
+ * CPA must be aligned modulo the sticter of HV_PAGE_TABLE_ALIGN and
+ * the level-2 page table size.
+ */
+static __inline unsigned long
+hv_pte_get_ptfn(const HV_PTE pte)
+{
+ return pte.val >> HV_PTE_INDEX_PTFN;
+}
+
+
+/** Set the page table frame number into a PTE. See hv_pte_get_ptfn. */
+static __inline HV_PTE
+hv_pte_set_ptfn(HV_PTE pte, unsigned long val)
+{
+ pte.val &= ~(((1ULL << HV_PTE_PTFN_BITS)-1) << HV_PTE_INDEX_PTFN);
+ pte.val |= (__hv64) val << HV_PTE_INDEX_PTFN;
+ return pte;
+}
+
+
+/** Get the remote tile caching this page.
+ *
+ * Specifies the remote tile which is providing the L3 cache for this page.
+ *
+ * This field is ignored unless the page mode is HV_PTE_MODE_CACHE_TILE_L3.
+ *
+ * In level-1 PTEs, if the Page bit is clear, this field determines how the
+ * level-2 page table is accessed.
+ */
+static __inline unsigned int
+hv_pte_get_lotar(const HV_PTE pte)
+{
+ unsigned int lotar = ((__hv32) pte.val) >> HV_PTE_INDEX_LOTAR;
+
+ return HV_XY_TO_LOTAR( (lotar >> (HV_PTE_LOTAR_BITS / 2)),
+ (lotar & ((1 << (HV_PTE_LOTAR_BITS / 2)) - 1)) );
+}
+
+
+/** Set the remote tile caching a page into a PTE. See hv_pte_get_lotar. */
+static __inline HV_PTE
+hv_pte_set_lotar(HV_PTE pte, unsigned int val)
+{
+ unsigned int x = HV_LOTAR_X(val);
+ unsigned int y = HV_LOTAR_Y(val);
+
+ pte.val &= ~(((1ULL << HV_PTE_LOTAR_BITS)-1) << HV_PTE_INDEX_LOTAR);
+ pte.val |= (x << (HV_PTE_INDEX_LOTAR + HV_PTE_LOTAR_BITS / 2)) |
+ (y << HV_PTE_INDEX_LOTAR);
+ return pte;
+}
+
+#endif /* !__ASSEMBLER__ */
+
+/** Converts a client physical address to a pfn. */
+#define HV_CPA_TO_PFN(p) ((p) >> HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Converts a pfn to a client physical address. */
+#define HV_PFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Converts a client physical address to a ptfn. */
+#define HV_CPA_TO_PTFN(p) ((p) >> HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Converts a ptfn to a client physical address. */
+#define HV_PTFN_TO_CPA(p) (((HV_PhysAddr)(p)) << HV_LOG2_PAGE_TABLE_ALIGN)
+
+/** Converts a ptfn to a pfn. */
+#define HV_PTFN_TO_PFN(p) \
+ ((p) >> (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
+
+/** Converts a pfn to a ptfn. */
+#define HV_PFN_TO_PTFN(p) \
+ ((p) << (HV_LOG2_PAGE_SIZE_SMALL - HV_LOG2_PAGE_TABLE_ALIGN))
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Log number of HV_PTE entries in L0 page table */
+#define HV_LOG2_L0_ENTRIES (CHIP_VA_WIDTH() - HV_LOG2_L1_SPAN)
+
+/** Number of HV_PTE entries in L0 page table */
+#define HV_L0_ENTRIES (1 << HV_LOG2_L0_ENTRIES)
+
+/** Log size of L0 page table in bytes */
+#define HV_LOG2_L0_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L0_ENTRIES)
+
+/** Size of L0 page table in bytes */
+#define HV_L0_SIZE (1 << HV_LOG2_L0_SIZE)
+
+#ifdef __ASSEMBLER__
+
+/** Index in L0 for a specific VA */
+#define HV_L0_INDEX(va) \
+ (((va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1))
+
+#else
+
+/** Index in L1 for a specific VA */
+#define HV_L0_INDEX(va) \
+ (((HV_VirtAddr)(va) >> HV_LOG2_L1_SPAN) & (HV_L0_ENTRIES - 1))
+
+#endif
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Log number of HV_PTE entries in L1 page table */
+#define HV_LOG2_L1_ENTRIES (HV_LOG2_L1_SPAN - HV_LOG2_PAGE_SIZE_LARGE)
+
+/** Number of HV_PTE entries in L1 page table */
+#define HV_L1_ENTRIES (1 << HV_LOG2_L1_ENTRIES)
+
+/** Log size of L1 page table in bytes */
+#define HV_LOG2_L1_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L1_ENTRIES)
+
+/** Size of L1 page table in bytes */
+#define HV_L1_SIZE (1 << HV_LOG2_L1_SIZE)
+
+/** Log number of HV_PTE entries in level-2 page table */
+#define HV_LOG2_L2_ENTRIES (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)
+
+/** Number of HV_PTE entries in level-2 page table */
+#define HV_L2_ENTRIES (1 << HV_LOG2_L2_ENTRIES)
+
+/** Log size of level-2 page table in bytes */
+#define HV_LOG2_L2_SIZE (HV_LOG2_PTE_SIZE + HV_LOG2_L2_ENTRIES)
+
+/** Size of level-2 page table in bytes */
+#define HV_L2_SIZE (1 << HV_LOG2_L2_SIZE)
+
+#ifdef __ASSEMBLER__
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+ (((va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+
+#else /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+ (((va) >> HV_LOG2_PAGE_SIZE_LARGE))
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in level-2 page table for a specific VA */
+#define HV_L2_INDEX(va) \
+ (((va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+
+#else /* __ASSEMBLER __ */
+
+#if CHIP_VA_WIDTH() > 32
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+ (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE) & (HV_L1_ENTRIES - 1))
+
+#else /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in L1 for a specific VA */
+#define HV_L1_INDEX(va) \
+ (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_LARGE))
+
+#endif /* CHIP_VA_WIDTH() > 32 */
+
+/** Index in level-2 page table for a specific VA */
+#define HV_L2_INDEX(va) \
+ (((HV_VirtAddr)(va) >> HV_LOG2_PAGE_SIZE_SMALL) & (HV_L2_ENTRIES - 1))
+
+#endif /* __ASSEMBLER __ */
+
+#endif /* _TILE_HV_H */
diff --git a/arch/tile/include/hv/syscall_public.h b/arch/tile/include/hv/syscall_public.h
new file mode 100644
index 000000000000..9cc0837e69fd
--- /dev/null
+++ b/arch/tile/include/hv/syscall_public.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file syscall.h
+ * Indices for the hypervisor system calls that are intended to be called
+ * directly, rather than only through hypervisor-generated "glue" code.
+ */
+
+#ifndef _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H
+#define _SYS_HV_INCLUDE_SYSCALL_PUBLIC_H
+
+/** Fast syscall flag bit location. When this bit is set, the hypervisor
+ * handles the syscall specially.
+ */
+#define HV_SYS_FAST_SHIFT 14
+
+/** Fast syscall flag bit mask. */
+#define HV_SYS_FAST_MASK (1 << HV_SYS_FAST_SHIFT)
+
+/** Bit location for flagging fast syscalls that can be called from PL0. */
+#define HV_SYS_FAST_PLO_SHIFT 13
+
+/** Fast syscall allowing PL0 bit mask. */
+#define HV_SYS_FAST_PL0_MASK (1 << HV_SYS_FAST_PLO_SHIFT)
+
+/** Perform an MF that waits for all victims to reach DRAM. */
+#define HV_SYS_fence_incoherent (51 | HV_SYS_FAST_MASK \
+ | HV_SYS_FAST_PL0_MASK)
+
+#endif /* !_SYS_HV_INCLUDE_SYSCALL_PUBLIC_H */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
new file mode 100644
index 000000000000..756e6ec452d3
--- /dev/null
+++ b/arch/tile/kernel/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the Linux/TILE kernel.
+#
+
+extra-y := vmlinux.lds head_$(BITS).o
+obj-y := backtrace.o entry.o init_task.o irq.o messaging.o \
+ pci-dma.o proc.o process.o ptrace.o reboot.o \
+ setup.o signal.o single_step.o stack.o sys.o time.o traps.o \
+ intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o
+
+obj-$(CONFIG_TILEGX) += futex_64.o
+obj-$(CONFIG_COMPAT) += compat.o compat_signal.o
+obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
diff --git a/arch/tile/kernel/asm-offsets.c b/arch/tile/kernel/asm-offsets.c
new file mode 100644
index 000000000000..01ddf19cc36d
--- /dev/null
+++ b/arch/tile/kernel/asm-offsets.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Generates definitions from c-type structures used by assembly sources.
+ */
+
+#include <linux/kbuild.h>
+#include <linux/thread_info.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h>
+#include <linux/ptrace.h>
+#include <hv/hypervisor.h>
+
+/* Check for compatible compiler early in the build. */
+#ifdef CONFIG_TILEGX
+# ifndef __tilegx__
+# error Can only build TILE-Gx configurations with tilegx compiler
+# endif
+# ifndef __LP64__
+# error Must not specify -m32 when building the TILE-Gx kernel
+# endif
+#else
+# ifdef __tilegx__
+# error Can not build TILEPro/TILE64 configurations with tilegx compiler
+# endif
+#endif
+
+void foo(void)
+{
+ DEFINE(SINGLESTEP_STATE_BUFFER_OFFSET, \
+ offsetof(struct single_step_state, buffer));
+ DEFINE(SINGLESTEP_STATE_FLAGS_OFFSET, \
+ offsetof(struct single_step_state, flags));
+ DEFINE(SINGLESTEP_STATE_ORIG_PC_OFFSET, \
+ offsetof(struct single_step_state, orig_pc));
+ DEFINE(SINGLESTEP_STATE_NEXT_PC_OFFSET, \
+ offsetof(struct single_step_state, next_pc));
+ DEFINE(SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET, \
+ offsetof(struct single_step_state, branch_next_pc));
+ DEFINE(SINGLESTEP_STATE_UPDATE_VALUE_OFFSET, \
+ offsetof(struct single_step_state, update_value));
+
+ DEFINE(THREAD_INFO_TASK_OFFSET, \
+ offsetof(struct thread_info, task));
+ DEFINE(THREAD_INFO_FLAGS_OFFSET, \
+ offsetof(struct thread_info, flags));
+ DEFINE(THREAD_INFO_STATUS_OFFSET, \
+ offsetof(struct thread_info, status));
+ DEFINE(THREAD_INFO_HOMECACHE_CPU_OFFSET, \
+ offsetof(struct thread_info, homecache_cpu));
+ DEFINE(THREAD_INFO_STEP_STATE_OFFSET, \
+ offsetof(struct thread_info, step_state));
+
+ DEFINE(TASK_STRUCT_THREAD_KSP_OFFSET,
+ offsetof(struct task_struct, thread.ksp));
+ DEFINE(TASK_STRUCT_THREAD_PC_OFFSET,
+ offsetof(struct task_struct, thread.pc));
+
+ DEFINE(HV_TOPOLOGY_WIDTH_OFFSET, \
+ offsetof(HV_Topology, width));
+ DEFINE(HV_TOPOLOGY_HEIGHT_OFFSET, \
+ offsetof(HV_Topology, height));
+
+ DEFINE(IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET, \
+ offsetof(irq_cpustat_t, irq_syscall_count));
+}
diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c
new file mode 100644
index 000000000000..1b0a410ef5e7
--- /dev/null
+++ b/arch/tile/kernel/backtrace.c
@@ -0,0 +1,634 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include <asm/backtrace.h>
+
+#include <arch/chip.h>
+
+#if TILE_CHIP < 10
+
+
+#include <asm/opcode-tile.h>
+
+
+#define TREG_SP 54
+#define TREG_LR 55
+
+
+/** A decoded bundle used for backtracer analysis. */
+typedef struct {
+ tile_bundle_bits bits;
+ int num_insns;
+ struct tile_decoded_instruction
+ insns[TILE_MAX_INSTRUCTIONS_PER_BUNDLE];
+} BacktraceBundle;
+
+
+/* This implementation only makes sense for native tools. */
+/** Default function to read memory. */
+static bool
+bt_read_memory(void *result, VirtualAddress addr, size_t size, void *extra)
+{
+ /* FIXME: this should do some horrible signal stuff to catch
+ * SEGV cleanly and fail.
+ *
+ * Or else the caller should do the setjmp for efficiency.
+ */
+
+ memcpy(result, (const void *)addr, size);
+ return true;
+}
+
+
+/** Locates an instruction inside the given bundle that
+ * has the specified mnemonic, and whose first 'num_operands_to_match'
+ * operands exactly match those in 'operand_values'.
+ */
+static const struct tile_decoded_instruction*
+find_matching_insn(const BacktraceBundle *bundle,
+ tile_mnemonic mnemonic,
+ const int *operand_values,
+ int num_operands_to_match)
+{
+ int i, j;
+ bool match;
+
+ for (i = 0; i < bundle->num_insns; i++) {
+ const struct tile_decoded_instruction *insn =
+ &bundle->insns[i];
+
+ if (insn->opcode->mnemonic != mnemonic)
+ continue;
+
+ match = true;
+ for (j = 0; j < num_operands_to_match; j++) {
+ if (operand_values[j] != insn->operand_values[j]) {
+ match = false;
+ break;
+ }
+ }
+
+ if (match)
+ return insn;
+ }
+
+ return NULL;
+}
+
+/** Does this bundle contain an 'iret' instruction? */
+static inline bool
+bt_has_iret(const BacktraceBundle *bundle)
+{
+ return find_matching_insn(bundle, TILE_OPC_IRET, NULL, 0) != NULL;
+}
+
+/** Does this bundle contain an 'addi sp, sp, OFFSET' or
+ * 'addli sp, sp, OFFSET' instruction, and if so, what is OFFSET?
+ */
+static bool
+bt_has_addi_sp(const BacktraceBundle *bundle, int *adjust)
+{
+ static const int vals[2] = { TREG_SP, TREG_SP };
+
+ const struct tile_decoded_instruction *insn =
+ find_matching_insn(bundle, TILE_OPC_ADDI, vals, 2);
+ if (insn == NULL)
+ insn = find_matching_insn(bundle, TILE_OPC_ADDLI, vals, 2);
+ if (insn == NULL)
+ return false;
+
+ *adjust = insn->operand_values[2];
+ return true;
+}
+
+/** Does this bundle contain any 'info OP' or 'infol OP'
+ * instruction, and if so, what are their OP? Note that OP is interpreted
+ * as an unsigned value by this code since that's what the caller wants.
+ * Returns the number of info ops found.
+ */
+static int
+bt_get_info_ops(const BacktraceBundle *bundle,
+ int operands[MAX_INFO_OPS_PER_BUNDLE])
+{
+ int num_ops = 0;
+ int i;
+
+ for (i = 0; i < bundle->num_insns; i++) {
+ const struct tile_decoded_instruction *insn =
+ &bundle->insns[i];
+
+ if (insn->opcode->mnemonic == TILE_OPC_INFO ||
+ insn->opcode->mnemonic == TILE_OPC_INFOL) {
+ operands[num_ops++] = insn->operand_values[0];
+ }
+ }
+
+ return num_ops;
+}
+
+/** Does this bundle contain a jrp instruction, and if so, to which
+ * register is it jumping?
+ */
+static bool
+bt_has_jrp(const BacktraceBundle *bundle, int *target_reg)
+{
+ const struct tile_decoded_instruction *insn =
+ find_matching_insn(bundle, TILE_OPC_JRP, NULL, 0);
+ if (insn == NULL)
+ return false;
+
+ *target_reg = insn->operand_values[0];
+ return true;
+}
+
+/** Does this bundle modify the specified register in any way? */
+static bool
+bt_modifies_reg(const BacktraceBundle *bundle, int reg)
+{
+ int i, j;
+ for (i = 0; i < bundle->num_insns; i++) {
+ const struct tile_decoded_instruction *insn =
+ &bundle->insns[i];
+
+ if (insn->opcode->implicitly_written_register == reg)
+ return true;
+
+ for (j = 0; j < insn->opcode->num_operands; j++)
+ if (insn->operands[j]->is_dest_reg &&
+ insn->operand_values[j] == reg)
+ return true;
+ }
+
+ return false;
+}
+
+/** Does this bundle modify sp? */
+static inline bool
+bt_modifies_sp(const BacktraceBundle *bundle)
+{
+ return bt_modifies_reg(bundle, TREG_SP);
+}
+
+/** Does this bundle modify lr? */
+static inline bool
+bt_modifies_lr(const BacktraceBundle *bundle)
+{
+ return bt_modifies_reg(bundle, TREG_LR);
+}
+
+/** Does this bundle contain the instruction 'move fp, sp'? */
+static inline bool
+bt_has_move_r52_sp(const BacktraceBundle *bundle)
+{
+ static const int vals[2] = { 52, TREG_SP };
+ return find_matching_insn(bundle, TILE_OPC_MOVE, vals, 2) != NULL;
+}
+
+/** Does this bundle contain the instruction 'sw sp, lr'? */
+static inline bool
+bt_has_sw_sp_lr(const BacktraceBundle *bundle)
+{
+ static const int vals[2] = { TREG_SP, TREG_LR };
+ return find_matching_insn(bundle, TILE_OPC_SW, vals, 2) != NULL;
+}
+
+/** Locates the caller's PC and SP for a program starting at the
+ * given address.
+ */
+static void
+find_caller_pc_and_caller_sp(CallerLocation *location,
+ const VirtualAddress start_pc,
+ BacktraceMemoryReader read_memory_func,
+ void *read_memory_func_extra)
+{
+ /* Have we explicitly decided what the sp is,
+ * rather than just the default?
+ */
+ bool sp_determined = false;
+
+ /* Has any bundle seen so far modified lr? */
+ bool lr_modified = false;
+
+ /* Have we seen a move from sp to fp? */
+ bool sp_moved_to_r52 = false;
+
+ /* Have we seen a terminating bundle? */
+ bool seen_terminating_bundle = false;
+
+ /* Cut down on round-trip reading overhead by reading several
+ * bundles at a time.
+ */
+ tile_bundle_bits prefetched_bundles[32];
+ int num_bundles_prefetched = 0;
+ int next_bundle = 0;
+ VirtualAddress pc;
+
+ /* Default to assuming that the caller's sp is the current sp.
+ * This is necessary to handle the case where we start backtracing
+ * right at the end of the epilog.
+ */
+ location->sp_location = SP_LOC_OFFSET;
+ location->sp_offset = 0;
+
+ /* Default to having no idea where the caller PC is. */
+ location->pc_location = PC_LOC_UNKNOWN;
+
+ /* Don't even try if the PC is not aligned. */
+ if (start_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0)
+ return;
+
+ for (pc = start_pc;; pc += sizeof(tile_bundle_bits)) {
+
+ BacktraceBundle bundle;
+ int num_info_ops, info_operands[MAX_INFO_OPS_PER_BUNDLE];
+ int one_ago, jrp_reg;
+ bool has_jrp;
+
+ if (next_bundle >= num_bundles_prefetched) {
+ /* Prefetch some bytes, but don't cross a page
+ * boundary since that might cause a read failure we
+ * don't care about if we only need the first few
+ * bytes. Note: we don't care what the actual page
+ * size is; using the minimum possible page size will
+ * prevent any problems.
+ */
+ unsigned int bytes_to_prefetch = 4096 - (pc & 4095);
+ if (bytes_to_prefetch > sizeof prefetched_bundles)
+ bytes_to_prefetch = sizeof prefetched_bundles;
+
+ if (!read_memory_func(prefetched_bundles, pc,
+ bytes_to_prefetch,
+ read_memory_func_extra)) {
+ if (pc == start_pc) {
+ /* The program probably called a bad
+ * address, such as a NULL pointer.
+ * So treat this as if we are at the
+ * start of the function prolog so the
+ * backtrace will show how we got here.
+ */
+ location->pc_location = PC_LOC_IN_LR;
+ return;
+ }
+
+ /* Unreadable address. Give up. */
+ break;
+ }
+
+ next_bundle = 0;
+ num_bundles_prefetched =
+ bytes_to_prefetch / sizeof(tile_bundle_bits);
+ }
+
+ /* Decode the next bundle. */
+ bundle.bits = prefetched_bundles[next_bundle++];
+ bundle.num_insns =
+ parse_insn_tile(bundle.bits, pc, bundle.insns);
+ num_info_ops = bt_get_info_ops(&bundle, info_operands);
+
+ /* First look at any one_ago info ops if they are interesting,
+ * since they should shadow any non-one-ago info ops.
+ */
+ for (one_ago = (pc != start_pc) ? 1 : 0;
+ one_ago >= 0; one_ago--) {
+ int i;
+ for (i = 0; i < num_info_ops; i++) {
+ int info_operand = info_operands[i];
+ if (info_operand < CALLER_UNKNOWN_BASE) {
+ /* Weird; reserved value, ignore it. */
+ continue;
+ }
+
+ /* Skip info ops which are not in the
+ * "one_ago" mode we want right now.
+ */
+ if (((info_operand & ONE_BUNDLE_AGO_FLAG) != 0)
+ != (one_ago != 0))
+ continue;
+
+ /* Clear the flag to make later checking
+ * easier. */
+ info_operand &= ~ONE_BUNDLE_AGO_FLAG;
+
+ /* Default to looking at PC_IN_LR_FLAG. */
+ if (info_operand & PC_IN_LR_FLAG)
+ location->pc_location =
+ PC_LOC_IN_LR;
+ else
+ location->pc_location =
+ PC_LOC_ON_STACK;
+
+ switch (info_operand) {
+ case CALLER_UNKNOWN_BASE:
+ location->pc_location = PC_LOC_UNKNOWN;
+ location->sp_location = SP_LOC_UNKNOWN;
+ return;
+
+ case CALLER_SP_IN_R52_BASE:
+ case CALLER_SP_IN_R52_BASE | PC_IN_LR_FLAG:
+ location->sp_location = SP_LOC_IN_R52;
+ return;
+
+ default:
+ {
+ const unsigned int val = info_operand
+ - CALLER_SP_OFFSET_BASE;
+ const unsigned int sp_offset =
+ (val >> NUM_INFO_OP_FLAGS) * 8;
+ if (sp_offset < 32768) {
+ /* This is a properly encoded
+ * SP offset. */
+ location->sp_location =
+ SP_LOC_OFFSET;
+ location->sp_offset =
+ sp_offset;
+ return;
+ } else {
+ /* This looked like an SP
+ * offset, but it's outside
+ * the legal range, so this
+ * must be an unrecognized
+ * info operand. Ignore it.
+ */
+ }
+ }
+ break;
+ }
+ }
+ }
+
+ if (seen_terminating_bundle) {
+ /* We saw a terminating bundle during the previous
+ * iteration, so we were only looking for an info op.
+ */
+ break;
+ }
+
+ if (bundle.bits == 0) {
+ /* Wacky terminating bundle. Stop looping, and hope
+ * we've already seen enough to find the caller.
+ */
+ break;
+ }
+
+ /*
+ * Try to determine caller's SP.
+ */
+
+ if (!sp_determined) {
+ int adjust;
+ if (bt_has_addi_sp(&bundle, &adjust)) {
+ location->sp_location = SP_LOC_OFFSET;
+
+ if (adjust <= 0) {
+ /* We are in prolog about to adjust
+ * SP. */
+ location->sp_offset = 0;
+ } else {
+ /* We are in epilog restoring SP. */
+ location->sp_offset = adjust;
+ }
+
+ sp_determined = true;
+ } else {
+ if (bt_has_move_r52_sp(&bundle)) {
+ /* Maybe in prolog, creating an
+ * alloca-style frame. But maybe in
+ * the middle of a fixed-size frame
+ * clobbering r52 with SP.
+ */
+ sp_moved_to_r52 = true;
+ }
+
+ if (bt_modifies_sp(&bundle)) {
+ if (sp_moved_to_r52) {
+ /* We saw SP get saved into
+ * r52 earlier (or now), which
+ * must have been in the
+ * prolog, so we now know that
+ * SP is still holding the
+ * caller's sp value.
+ */
+ location->sp_location =
+ SP_LOC_OFFSET;
+ location->sp_offset = 0;
+ } else {
+ /* Someone must have saved
+ * aside the caller's SP value
+ * into r52, so r52 holds the
+ * current value.
+ */
+ location->sp_location =
+ SP_LOC_IN_R52;
+ }
+ sp_determined = true;
+ }
+ }
+ }
+
+ if (bt_has_iret(&bundle)) {
+ /* This is a terminating bundle. */
+ seen_terminating_bundle = true;
+ continue;
+ }
+
+ /*
+ * Try to determine caller's PC.
+ */
+
+ jrp_reg = -1;
+ has_jrp = bt_has_jrp(&bundle, &jrp_reg);
+ if (has_jrp)
+ seen_terminating_bundle = true;
+
+ if (location->pc_location == PC_LOC_UNKNOWN) {
+ if (has_jrp) {
+ if (jrp_reg == TREG_LR && !lr_modified) {
+ /* Looks like a leaf function, or else
+ * lr is already restored. */
+ location->pc_location =
+ PC_LOC_IN_LR;
+ } else {
+ location->pc_location =
+ PC_LOC_ON_STACK;
+ }
+ } else if (bt_has_sw_sp_lr(&bundle)) {
+ /* In prolog, spilling initial lr to stack. */
+ location->pc_location = PC_LOC_IN_LR;
+ } else if (bt_modifies_lr(&bundle)) {
+ lr_modified = true;
+ }
+ }
+ }
+}
+
+void
+backtrace_init(BacktraceIterator *state,
+ BacktraceMemoryReader read_memory_func,
+ void *read_memory_func_extra,
+ VirtualAddress pc, VirtualAddress lr,
+ VirtualAddress sp, VirtualAddress r52)
+{
+ CallerLocation location;
+ VirtualAddress fp, initial_frame_caller_pc;
+
+ if (read_memory_func == NULL) {
+ read_memory_func = bt_read_memory;
+ }
+
+ /* Find out where we are in the initial frame. */
+ find_caller_pc_and_caller_sp(&location, pc,
+ read_memory_func, read_memory_func_extra);
+
+ switch (location.sp_location) {
+ case SP_LOC_UNKNOWN:
+ /* Give up. */
+ fp = -1;
+ break;
+
+ case SP_LOC_IN_R52:
+ fp = r52;
+ break;
+
+ case SP_LOC_OFFSET:
+ fp = sp + location.sp_offset;
+ break;
+
+ default:
+ /* Give up. */
+ fp = -1;
+ break;
+ }
+
+ /* The frame pointer should theoretically be aligned mod 8. If
+ * it's not even aligned mod 4 then something terrible happened
+ * and we should mark it as invalid.
+ */
+ if (fp % 4 != 0)
+ fp = -1;
+
+ /* -1 means "don't know initial_frame_caller_pc". */
+ initial_frame_caller_pc = -1;
+
+ switch (location.pc_location) {
+ case PC_LOC_UNKNOWN:
+ /* Give up. */
+ fp = -1;
+ break;
+
+ case PC_LOC_IN_LR:
+ if (lr == 0 || lr % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) {
+ /* Give up. */
+ fp = -1;
+ } else {
+ initial_frame_caller_pc = lr;
+ }
+ break;
+
+ case PC_LOC_ON_STACK:
+ /* Leave initial_frame_caller_pc as -1,
+ * meaning check the stack.
+ */
+ break;
+
+ default:
+ /* Give up. */
+ fp = -1;
+ break;
+ }
+
+ state->pc = pc;
+ state->sp = sp;
+ state->fp = fp;
+ state->initial_frame_caller_pc = initial_frame_caller_pc;
+ state->read_memory_func = read_memory_func;
+ state->read_memory_func_extra = read_memory_func_extra;
+}
+
+bool
+backtrace_next(BacktraceIterator *state)
+{
+ VirtualAddress next_fp, next_pc, next_frame[2];
+
+ if (state->fp == -1) {
+ /* No parent frame. */
+ return false;
+ }
+
+ /* Try to read the frame linkage data chaining to the next function. */
+ if (!state->read_memory_func(&next_frame, state->fp, sizeof next_frame,
+ state->read_memory_func_extra)) {
+ return false;
+ }
+
+ next_fp = next_frame[1];
+ if (next_fp % 4 != 0) {
+ /* Caller's frame pointer is suspect, so give up.
+ * Technically it should be aligned mod 8, but we will
+ * be forgiving here.
+ */
+ return false;
+ }
+
+ if (state->initial_frame_caller_pc != -1) {
+ /* We must be in the initial stack frame and already know the
+ * caller PC.
+ */
+ next_pc = state->initial_frame_caller_pc;
+
+ /* Force reading stack next time, in case we were in the
+ * initial frame. We don't do this above just to paranoidly
+ * avoid changing the struct at all when we return false.
+ */
+ state->initial_frame_caller_pc = -1;
+ } else {
+ /* Get the caller PC from the frame linkage area. */
+ next_pc = next_frame[0];
+ if (next_pc == 0 ||
+ next_pc % TILE_BUNDLE_ALIGNMENT_IN_BYTES != 0) {
+ /* The PC is suspect, so give up. */
+ return false;
+ }
+ }
+
+ /* Update state to become the caller's stack frame. */
+ state->pc = next_pc;
+ state->sp = state->fp;
+ state->fp = next_fp;
+
+ return true;
+}
+
+#else /* TILE_CHIP < 10 */
+
+void
+backtrace_init(BacktraceIterator *state,
+ BacktraceMemoryReader read_memory_func,
+ void *read_memory_func_extra,
+ VirtualAddress pc, VirtualAddress lr,
+ VirtualAddress sp, VirtualAddress r52)
+{
+ state->pc = pc;
+ state->sp = sp;
+ state->fp = -1;
+ state->initial_frame_caller_pc = -1;
+ state->read_memory_func = read_memory_func;
+ state->read_memory_func_extra = read_memory_func_extra;
+}
+
+bool backtrace_next(BacktraceIterator *state) { return false; }
+
+#endif /* TILE_CHIP < 10 */
diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c
new file mode 100644
index 000000000000..a374c99deeb6
--- /dev/null
+++ b/arch/tile/kernel/compat.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/* Adjust unistd.h to provide 32-bit numbers and functions. */
+#define __SYSCALL_COMPAT
+
+#include <linux/compat.h>
+#include <linux/msg.h>
+#include <linux/syscalls.h>
+#include <linux/kdev_t.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/smp_lock.h>
+#include <linux/uaccess.h>
+#include <linux/signal.h>
+#include <asm/syscalls.h>
+
+/*
+ * Syscalls that take 64-bit numbers traditionally take them in 32-bit
+ * "high" and "low" value parts on 32-bit architectures.
+ * In principle, one could imagine passing some register arguments as
+ * fully 64-bit on TILE-Gx in 32-bit mode, but it seems easier to
+ * adapt the usual convention.
+ */
+
+long compat_sys_truncate64(char __user *filename, u32 dummy, u32 low, u32 high)
+{
+ return sys_truncate(filename, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_ftruncate64(unsigned int fd, u32 dummy, u32 low, u32 high)
+{
+ return sys_ftruncate(fd, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_pread64(unsigned int fd, char __user *ubuf, size_t count,
+ u32 dummy, u32 low, u32 high)
+{
+ return sys_pread64(fd, ubuf, count, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count,
+ u32 dummy, u32 low, u32 high)
+{
+ return sys_pwrite64(fd, ubuf, count, ((loff_t)high << 32) | low);
+}
+
+long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len)
+{
+ return sys_lookup_dcookie(((loff_t)high << 32) | low, buf, len);
+}
+
+long compat_sys_sync_file_range2(int fd, unsigned int flags,
+ u32 offset_lo, u32 offset_hi,
+ u32 nbytes_lo, u32 nbytes_hi)
+{
+ return sys_sync_file_range(fd, ((loff_t)offset_hi << 32) | offset_lo,
+ ((loff_t)nbytes_hi << 32) | nbytes_lo,
+ flags);
+}
+
+long compat_sys_fallocate(int fd, int mode,
+ u32 offset_lo, u32 offset_hi,
+ u32 len_lo, u32 len_hi)
+{
+ return sys_fallocate(fd, mode, ((loff_t)offset_hi << 32) | offset_lo,
+ ((loff_t)len_hi << 32) | len_lo);
+}
+
+
+
+long compat_sys_sched_rr_get_interval(compat_pid_t pid,
+ struct compat_timespec __user *interval)
+{
+ struct timespec t;
+ int ret;
+ mm_segment_t old_fs = get_fs();
+
+ set_fs(KERNEL_DS);
+ ret = sys_sched_rr_get_interval(pid, (struct timespec __user *)&t);
+ set_fs(old_fs);
+ if (put_compat_timespec(&t, interval))
+ return -EFAULT;
+ return ret;
+}
+
+ssize_t compat_sys_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
+ size_t count)
+{
+ mm_segment_t old_fs = get_fs();
+ int ret;
+ off_t of;
+
+ if (offset && get_user(of, offset))
+ return -EFAULT;
+
+ set_fs(KERNEL_DS);
+ ret = sys_sendfile(out_fd, in_fd, offset ? (off_t __user *)&of : NULL,
+ count);
+ set_fs(old_fs);
+
+ if (offset && put_user(of, offset))
+ return -EFAULT;
+ return ret;
+}
+
+
+/*
+ * The usual compat_sys_msgsnd() and _msgrcv() seem to be assuming
+ * some different calling convention than our normal 32-bit tile code.
+ */
+
+/* Already defined in ipc/compat.c, but we need it here. */
+struct compat_msgbuf {
+ compat_long_t mtype;
+ char mtext[1];
+};
+
+long tile_compat_sys_msgsnd(int msqid,
+ struct compat_msgbuf __user *msgp,
+ size_t msgsz, int msgflg)
+{
+ compat_long_t mtype;
+
+ if (get_user(mtype, &msgp->mtype))
+ return -EFAULT;
+ return do_msgsnd(msqid, mtype, msgp->mtext, msgsz, msgflg);
+}
+
+long tile_compat_sys_msgrcv(int msqid,
+ struct compat_msgbuf __user *msgp,
+ size_t msgsz, long msgtyp, int msgflg)
+{
+ long err, mtype;
+
+ err = do_msgrcv(msqid, &mtype, msgp->mtext, msgsz, msgtyp, msgflg);
+ if (err < 0)
+ goto out;
+
+ if (put_user(mtype, &msgp->mtype))
+ err = -EFAULT;
+ out:
+ return err;
+}
+
+/* Provide the compat syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (compat_##call),
+
+/* The generic versions of these don't work for Tile. */
+#define compat_sys_msgrcv tile_compat_sys_msgrcv
+#define compat_sys_msgsnd tile_compat_sys_msgsnd
+
+/* See comments in sys.c */
+#define compat_sys_fadvise64 sys32_fadvise64
+#define compat_sys_fadvise64_64 sys32_fadvise64_64
+#define compat_sys_readahead sys32_readahead
+#define compat_sys_sync_file_range compat_sys_sync_file_range2
+
+/* The native 64-bit "struct stat" matches the 32-bit "struct stat64". */
+#define compat_sys_stat64 sys_newstat
+#define compat_sys_lstat64 sys_newlstat
+#define compat_sys_fstat64 sys_newfstat
+#define compat_sys_fstatat64 sys_newfstatat
+
+/* Pass full 64-bit values through ptrace. */
+#define compat_sys_ptrace tile_compat_sys_ptrace
+
+void *compat_sys_call_table[__NR_syscalls] = {
+ [0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
new file mode 100644
index 000000000000..9fa4ba8ed5f4
--- /dev/null
+++ b/arch/tile/kernel/compat_signal.c
@@ -0,0 +1,433 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/compat.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <arch/interrupts.h>
+
+struct compat_sigaction {
+ compat_uptr_t sa_handler;
+ compat_ulong_t sa_flags;
+ compat_uptr_t sa_restorer;
+ sigset_t sa_mask; /* mask last for extensibility */
+};
+
+struct compat_sigaltstack {
+ compat_uptr_t ss_sp;
+ int ss_flags;
+ compat_size_t ss_size;
+};
+
+struct compat_ucontext {
+ compat_ulong_t uc_flags;
+ compat_uptr_t uc_link;
+ struct compat_sigaltstack uc_stack;
+ struct sigcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+struct compat_siginfo {
+ int si_signo;
+ int si_errno;
+ int si_code;
+
+ union {
+ int _pad[SI_PAD_SIZE];
+
+ /* kill() */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ } _kill;
+
+ /* POSIX.1b timers */
+ struct {
+ compat_timer_t _tid; /* timer id */
+ int _overrun; /* overrun count */
+ compat_sigval_t _sigval; /* same as below */
+ int _sys_private; /* not to be passed to user */
+ int _overrun_incr; /* amount to add to overrun */
+ } _timer;
+
+ /* POSIX.1b signals */
+ struct {
+ unsigned int _pid; /* sender's pid */
+ unsigned int _uid; /* sender's uid */
+ compat_sigval_t _sigval;
+ } _rt;
+
+ /* SIGCHLD */
+ struct {
+ unsigned int _pid; /* which child */
+ unsigned int _uid; /* sender's uid */
+ int _status; /* exit code */
+ compat_clock_t _utime;
+ compat_clock_t _stime;
+ } _sigchld;
+
+ /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+ struct {
+ unsigned int _addr; /* faulting insn/memory ref. */
+#ifdef __ARCH_SI_TRAPNO
+ int _trapno; /* TRAP # which caused the signal */
+#endif
+ } _sigfault;
+
+ /* SIGPOLL */
+ struct {
+ int _band; /* POLL_IN, POLL_OUT, POLL_MSG */
+ int _fd;
+ } _sigpoll;
+ } _sifields;
+};
+
+struct compat_rt_sigframe {
+ unsigned char save_area[C_ABI_SAVE_AREA_SIZE]; /* caller save area */
+ struct compat_siginfo info;
+ struct compat_ucontext uc;
+};
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act,
+ struct compat_sigaction __user *oact,
+ size_t sigsetsize)
+{
+ struct k_sigaction new_sa, old_sa;
+ int ret = -EINVAL;
+
+ /* XXX: Don't preclude handling different sized sigset_t's. */
+ if (sigsetsize != sizeof(sigset_t))
+ goto out;
+
+ if (act) {
+ compat_uptr_t handler, restorer;
+
+ if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
+ __get_user(handler, &act->sa_handler) ||
+ __get_user(new_sa.sa.sa_flags, &act->sa_flags) ||
+ __get_user(restorer, &act->sa_restorer) ||
+ __copy_from_user(&new_sa.sa.sa_mask, &act->sa_mask,
+ sizeof(sigset_t)))
+ return -EFAULT;
+ new_sa.sa.sa_handler = compat_ptr(handler);
+ new_sa.sa.sa_restorer = compat_ptr(restorer);
+ }
+
+ ret = do_sigaction(sig, act ? &new_sa : NULL, oact ? &old_sa : NULL);
+
+ if (!ret && oact) {
+ if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
+ __put_user(ptr_to_compat(old_sa.sa.sa_handler),
+ &oact->sa_handler) ||
+ __put_user(ptr_to_compat(old_sa.sa.sa_restorer),
+ &oact->sa_restorer) ||
+ __put_user(old_sa.sa.sa_flags, &oact->sa_flags) ||
+ __copy_to_user(&oact->sa_mask, &old_sa.sa.sa_mask,
+ sizeof(sigset_t)))
+ return -EFAULT;
+ }
+out:
+ return ret;
+}
+
+long compat_sys_rt_sigqueueinfo(int pid, int sig,
+ struct compat_siginfo __user *uinfo)
+{
+ siginfo_t info;
+ int ret;
+ mm_segment_t old_fs = get_fs();
+
+ if (copy_siginfo_from_user32(&info, uinfo))
+ return -EFAULT;
+ set_fs(KERNEL_DS);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *)&info);
+ set_fs(old_fs);
+ return ret;
+}
+
+int copy_siginfo_to_user32(struct compat_siginfo __user *to, siginfo_t *from)
+{
+ int err;
+
+ if (!access_ok(VERIFY_WRITE, to, sizeof(struct compat_siginfo)))
+ return -EFAULT;
+
+ /* If you change siginfo_t structure, please make sure that
+ this code is fixed accordingly.
+ It should never copy any pad contained in the structure
+ to avoid security leaks, but must copy the generic
+ 3 ints plus the relevant union member. */
+ err = __put_user(from->si_signo, &to->si_signo);
+ err |= __put_user(from->si_errno, &to->si_errno);
+ err |= __put_user((short)from->si_code, &to->si_code);
+
+ if (from->si_code < 0) {
+ err |= __put_user(from->si_pid, &to->si_pid);
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr);
+ } else {
+ /*
+ * First 32bits of unions are always present:
+ * si_pid === si_band === si_tid === si_addr(LS half)
+ */
+ err |= __put_user(from->_sifields._pad[0],
+ &to->_sifields._pad[0]);
+ switch (from->si_code >> 16) {
+ case __SI_FAULT >> 16:
+ break;
+ case __SI_CHLD >> 16:
+ err |= __put_user(from->si_utime, &to->si_utime);
+ err |= __put_user(from->si_stime, &to->si_stime);
+ err |= __put_user(from->si_status, &to->si_status);
+ /* FALL THROUGH */
+ default:
+ case __SI_KILL >> 16:
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_POLL >> 16:
+ err |= __put_user(from->si_fd, &to->si_fd);
+ break;
+ case __SI_TIMER >> 16:
+ err |= __put_user(from->si_overrun, &to->si_overrun);
+ err |= __put_user(ptr_to_compat(from->si_ptr),
+ &to->si_ptr);
+ break;
+ /* This is not generated by the kernel as of now. */
+ case __SI_RT >> 16:
+ case __SI_MESGQ >> 16:
+ err |= __put_user(from->si_uid, &to->si_uid);
+ err |= __put_user(from->si_int, &to->si_int);
+ break;
+ }
+ }
+ return err;
+}
+
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
+{
+ int err;
+ u32 ptr32;
+
+ if (!access_ok(VERIFY_READ, from, sizeof(struct compat_siginfo)))
+ return -EFAULT;
+
+ err = __get_user(to->si_signo, &from->si_signo);
+ err |= __get_user(to->si_errno, &from->si_errno);
+ err |= __get_user(to->si_code, &from->si_code);
+
+ err |= __get_user(to->si_pid, &from->si_pid);
+ err |= __get_user(to->si_uid, &from->si_uid);
+ err |= __get_user(ptr32, &from->si_ptr);
+ to->si_ptr = compat_ptr(ptr32);
+
+ return err;
+}
+
+long _compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
+ struct compat_sigaltstack __user *uoss_ptr,
+ struct pt_regs *regs)
+{
+ stack_t uss, uoss;
+ int ret;
+ mm_segment_t seg;
+
+ if (uss_ptr) {
+ u32 ptr;
+
+ memset(&uss, 0, sizeof(stack_t));
+ if (!access_ok(VERIFY_READ, uss_ptr, sizeof(*uss_ptr)) ||
+ __get_user(ptr, &uss_ptr->ss_sp) ||
+ __get_user(uss.ss_flags, &uss_ptr->ss_flags) ||
+ __get_user(uss.ss_size, &uss_ptr->ss_size))
+ return -EFAULT;
+ uss.ss_sp = compat_ptr(ptr);
+ }
+ seg = get_fs();
+ set_fs(KERNEL_DS);
+ ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss,
+ (unsigned long)compat_ptr(regs->sp));
+ set_fs(seg);
+ if (ret >= 0 && uoss_ptr) {
+ if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(*uoss_ptr)) ||
+ __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) ||
+ __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) ||
+ __put_user(uoss.ss_size, &uoss_ptr->ss_size))
+ ret = -EFAULT;
+ }
+ return ret;
+}
+
+long _compat_sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct compat_rt_sigframe __user *frame =
+ (struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
+ sigset_t set;
+ long r0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ goto badframe;
+
+ if (_compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
+ goto badframe;
+
+ return r0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *compat_get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp;
+
+ /* Default to using normal stack */
+ sp = (unsigned long)compat_ptr(regs->sp);
+
+ /*
+ * If we are on the alternate signal stack and would overflow
+ * it, don't. Return an always-bogus address instead so we
+ * will die with SIGSEGV.
+ */
+ if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+ return (void __user *) -1L;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (sas_ss_flags(sp) == 0)
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ sp -= frame_size;
+ /*
+ * Align the stack pointer according to the TILE ABI,
+ * i.e. so that on function entry (sp & 15) == 0.
+ */
+ sp &= -16UL;
+ return (void __user *) sp;
+}
+
+int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ unsigned long restorer;
+ struct compat_rt_sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = compat_get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ /* Always write at least the signal number for the stack backtracer. */
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ /* At sigreturn time, restore the callee-save registers too. */
+ err |= copy_siginfo_to_user32(&frame->info, info);
+ regs->flags |= PT_FLAGS_RESTORE_REGS;
+ } else {
+ err |= __put_user(info->si_signo, &frame->info.si_signo);
+ }
+
+ /* Create the ucontext. */
+ err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user(ptr_to_compat((void *)(current->sas_ss_sp)),
+ &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->sp),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto give_sigsegv;
+
+ restorer = VDSO_BASE;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = ptr_to_compat_reg(ka->sa.sa_restorer);
+
+ /*
+ * Set up registers for signal handler.
+ * Registers that we don't modify keep the value they had from
+ * user-space at the time we took the signal.
+ */
+ regs->pc = ptr_to_compat_reg(ka->sa.sa_handler);
+ regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
+ regs->sp = ptr_to_compat_reg(frame);
+ regs->lr = restorer;
+ regs->regs[0] = (unsigned long) usig;
+
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ /* Need extra arguments, so mark to restore caller-saves. */
+ regs->regs[1] = ptr_to_compat_reg(&frame->info);
+ regs->regs[2] = ptr_to_compat_reg(&frame->uc);
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+ }
+
+ /*
+ * Notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+ return 0;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+ return -EFAULT;
+}
diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c
new file mode 100644
index 000000000000..e44d441e3f3f
--- /dev/null
+++ b/arch/tile/kernel/early_printk.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <asm/setup.h>
+#include <hv/hypervisor.h>
+
+static void early_hv_write(struct console *con, const char *s, unsigned n)
+{
+ hv_console_write((HV_VirtAddr) s, n);
+}
+
+static struct console early_hv_console = {
+ .name = "earlyhv",
+ .write = early_hv_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/* Direct interface for emergencies */
+struct console *early_console = &early_hv_console;
+static int early_console_initialized;
+static int early_console_complete;
+
+static void early_vprintk(const char *fmt, va_list ap)
+{
+ char buf[512];
+ int n = vscnprintf(buf, sizeof(buf), fmt, ap);
+ early_console->write(early_console, buf, n);
+}
+
+void early_printk(const char *fmt, ...)
+{
+ va_list ap;
+ va_start(ap, fmt);
+ early_vprintk(fmt, ap);
+ va_end(ap);
+}
+
+void early_panic(const char *fmt, ...)
+{
+ va_list ap;
+ raw_local_irq_disable_all();
+ va_start(ap, fmt);
+ early_printk("Kernel panic - not syncing: ");
+ early_vprintk(fmt, ap);
+ early_console->write(early_console, "\n", 1);
+ va_end(ap);
+ dump_stack();
+ hv_halt();
+}
+
+static int __initdata keep_early;
+
+static int __init setup_early_printk(char *str)
+{
+ if (early_console_initialized)
+ return 1;
+
+ if (str != NULL && strncmp(str, "keep", 4) == 0)
+ keep_early = 1;
+
+ early_console = &early_hv_console;
+ early_console_initialized = 1;
+ register_console(early_console);
+
+ return 0;
+}
+
+void __init disable_early_printk(void)
+{
+ early_console_complete = 1;
+ if (!early_console_initialized || !early_console)
+ return;
+ if (!keep_early) {
+ early_printk("disabling early console\n");
+ unregister_console(early_console);
+ early_console_initialized = 0;
+ } else {
+ early_printk("keeping early console\n");
+ }
+}
+
+void warn_early_printk(void)
+{
+ if (early_console_complete || early_console_initialized)
+ return;
+ early_printk("\
+Machine shutting down before console output is fully initialized.\n\
+You may wish to reboot and add the option 'earlyprintk' to your\n\
+boot command line to see any diagnostic early console output.\n\
+");
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/tile/kernel/entry.S b/arch/tile/kernel/entry.S
new file mode 100644
index 000000000000..136261f7d7f9
--- /dev/null
+++ b/arch/tile/kernel/entry.S
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/linkage.h>
+#include <arch/abi.h>
+#include <asm/unistd.h>
+#include <asm/irqflags.h>
+
+#ifdef __tilegx__
+#define bnzt bnezt
+#endif
+
+STD_ENTRY(current_text_addr)
+ { move r0, lr; jrp lr }
+ STD_ENDPROC(current_text_addr)
+
+STD_ENTRY(_sim_syscall)
+ /*
+ * Wait for r0-r9 to be ready (and lr on the off chance we
+ * want the syscall to locate its caller), then make a magic
+ * simulator syscall.
+ *
+ * We carefully stall until the registers are readable in case they
+ * are the target of a slow load, etc. so that tile-sim will
+ * definitely be able to read all of them inside the magic syscall.
+ *
+ * Technically this is wrong for r3-r9 and lr, since an interrupt
+ * could come in and restore the registers with a slow load right
+ * before executing the mtspr. We may need to modify tile-sim to
+ * explicitly stall for this case, but we do not yet have
+ * a way to implement such a stall.
+ */
+ { and zero, lr, r9 ; and zero, r8, r7 }
+ { and zero, r6, r5 ; and zero, r4, r3 }
+ { and zero, r2, r1 ; mtspr SIM_CONTROL, r0 }
+ { jrp lr }
+ STD_ENDPROC(_sim_syscall)
+
+/*
+ * Implement execve(). The i386 code has a note that forking from kernel
+ * space results in no copy on write until the execve, so we should be
+ * careful not to write to the stack here.
+ */
+STD_ENTRY(kernel_execve)
+ moveli TREG_SYSCALL_NR_NAME, __NR_execve
+ swint1
+ jrp lr
+ STD_ENDPROC(kernel_execve)
+
+/* Delay a fixed number of cycles. */
+STD_ENTRY(__delay)
+ { addi r0, r0, -1; bnzt r0, . }
+ jrp lr
+ STD_ENDPROC(__delay)
+
+/*
+ * We don't run this function directly, but instead copy it to a page
+ * we map into every user process. See vdso_setup().
+ *
+ * Note that libc has a copy of this function that it uses to compare
+ * against the PC when a stack backtrace ends, so if this code is
+ * changed, the libc implementation(s) should also be updated.
+ */
+ .pushsection .data
+ENTRY(__rt_sigreturn)
+ moveli TREG_SYSCALL_NR_NAME,__NR_rt_sigreturn
+ swint1
+ ENDPROC(__rt_sigreturn)
+ ENTRY(__rt_sigreturn_end)
+ .popsection
+
+STD_ENTRY(dump_stack)
+ { move r2, lr; lnk r1 }
+ { move r4, r52; addli r1, r1, dump_stack - . }
+ { move r3, sp; j _dump_stack }
+ jrp lr /* keep backtracer happy */
+ STD_ENDPROC(dump_stack)
+
+STD_ENTRY(KBacktraceIterator_init_current)
+ { move r2, lr; lnk r1 }
+ { move r4, r52; addli r1, r1, KBacktraceIterator_init_current - . }
+ { move r3, sp; j _KBacktraceIterator_init_current }
+ jrp lr /* keep backtracer happy */
+ STD_ENDPROC(KBacktraceIterator_init_current)
+
+/*
+ * Reset our stack to r1/r2 (sp and ksp0+cpu respectively), then
+ * free the old stack (passed in r0) and re-invoke cpu_idle().
+ * We update sp and ksp0 simultaneously to avoid backtracer warnings.
+ */
+STD_ENTRY(cpu_idle_on_new_stack)
+ {
+ move sp, r1
+ mtspr SYSTEM_SAVE_1_0, r2
+ }
+ jal free_thread_info
+ j cpu_idle
+ STD_ENDPROC(cpu_idle_on_new_stack)
+
+/* Loop forever on a nap during SMP boot. */
+STD_ENTRY(smp_nap)
+ nap
+ j smp_nap /* we are not architecturally guaranteed not to exit nap */
+ jrp lr /* clue in the backtracer */
+ STD_ENDPROC(smp_nap)
+
+/*
+ * Enable interrupts racelessly and then nap until interrupted.
+ * This function's _cpu_idle_nap address is special; see intvec.S.
+ * When interrupted at _cpu_idle_nap, we bump the PC forward 8, and
+ * as a result return to the function that called _cpu_idle().
+ */
+STD_ENTRY(_cpu_idle)
+ {
+ lnk r0
+ movei r1, 1
+ }
+ {
+ addli r0, r0, _cpu_idle_nap - .
+ mtspr INTERRUPT_CRITICAL_SECTION, r1
+ }
+ IRQ_ENABLE(r2, r3) /* unmask, but still with ICS set */
+ mtspr EX_CONTEXT_1_1, r1 /* PL1, ICS clear */
+ mtspr EX_CONTEXT_1_0, r0
+ iret
+ .global _cpu_idle_nap
+_cpu_idle_nap:
+ nap
+ jrp lr
+ STD_ENDPROC(_cpu_idle)
diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S
new file mode 100644
index 000000000000..2b4f6c091701
--- /dev/null
+++ b/arch/tile/kernel/head_32.S
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * TILE startup code.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+/*
+ * This module contains the entry code for kernel images. It performs the
+ * minimal setup needed to call the generic C routines.
+ */
+
+ __HEAD
+ENTRY(_start)
+ /* Notify the hypervisor of what version of the API we want */
+ {
+ movei r1, TILE_CHIP
+ movei r2, TILE_CHIP_REV
+ }
+ {
+ moveli r0, _HV_VERSION
+ jal hv_init
+ }
+ /* Get a reasonable default ASID in r0 */
+ {
+ move r0, zero
+ jal hv_inquire_asid
+ }
+ /* Install the default page table */
+ {
+ moveli r6, lo16(swapper_pgprot - PAGE_OFFSET)
+ move r4, r0 /* use starting ASID of range for this page table */
+ }
+ {
+ moveli r0, lo16(swapper_pg_dir - PAGE_OFFSET)
+ auli r6, r6, ha16(swapper_pgprot - PAGE_OFFSET)
+ }
+ {
+ lw r2, r6
+ addi r6, r6, 4
+ }
+ {
+ lw r3, r6
+ auli r0, r0, ha16(swapper_pg_dir - PAGE_OFFSET)
+ }
+ {
+ inv r6
+ move r1, zero /* high 32 bits of CPA is zero */
+ }
+ {
+ moveli lr, lo16(1f)
+ move r5, zero
+ }
+ {
+ auli lr, lr, ha16(1f)
+ j hv_install_context
+ }
+1:
+
+ /* Get our processor number and save it away in SAVE_1_0. */
+ jal hv_inquire_topology
+ mulll_uu r4, r1, r2 /* r1 == y, r2 == width */
+ add r4, r4, r0 /* r0 == x, so r4 == cpu == y*width + x */
+
+#ifdef CONFIG_SMP
+ /*
+ * Load up our per-cpu offset. When the first (master) tile
+ * boots, this value is still zero, so we will load boot_pc
+ * with start_kernel, and boot_sp with init_stack + THREAD_SIZE.
+ * The master tile initializes the per-cpu offset array, so that
+ * when subsequent (secondary) tiles boot, they will instead load
+ * from their per-cpu versions of boot_sp and boot_pc.
+ */
+ moveli r5, lo16(__per_cpu_offset)
+ auli r5, r5, ha16(__per_cpu_offset)
+ s2a r5, r4, r5
+ lw r5, r5
+ bnz r5, 1f
+
+ /*
+ * Save the width and height to the smp_topology variable
+ * for later use.
+ */
+ moveli r0, lo16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+ auli r0, r0, ha16(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET)
+ {
+ sw r0, r2
+ addi r0, r0, (HV_TOPOLOGY_HEIGHT_OFFSET - HV_TOPOLOGY_WIDTH_OFFSET)
+ }
+ sw r0, r3
+1:
+#else
+ move r5, zero
+#endif
+
+ /* Load and go with the correct pc and sp. */
+ {
+ addli r1, r5, lo16(boot_sp)
+ addli r0, r5, lo16(boot_pc)
+ }
+ {
+ auli r1, r1, ha16(boot_sp)
+ auli r0, r0, ha16(boot_pc)
+ }
+ lw r0, r0
+ lw sp, r1
+ or r4, sp, r4
+ mtspr SYSTEM_SAVE_1_0, r4 /* save ksp0 + cpu */
+ addi sp, sp, -STACK_TOP_DELTA
+ {
+ move lr, zero /* stop backtraces in the called function */
+ jr r0
+ }
+ ENDPROC(_start)
+
+.section ".bss.page_aligned","w"
+ .align PAGE_SIZE
+ENTRY(empty_zero_page)
+ .fill PAGE_SIZE,1,0
+ END(empty_zero_page)
+
+ .macro PTE va, cpa, bits1, no_org=0
+ .ifeq \no_org
+ .org swapper_pg_dir + HV_L1_INDEX(\va) * HV_PTE_SIZE
+ .endif
+ .word HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED | \
+ (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE)
+ .word (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN)
+ .endm
+
+.section ".data.page_aligned","wa"
+ .align PAGE_SIZE
+ENTRY(swapper_pg_dir)
+ /*
+ * All data pages from PAGE_OFFSET to MEM_USER_INTRPT are mapped as
+ * VA = PA + PAGE_OFFSET. We remap things with more precise access
+ * permissions and more respect for size of RAM later.
+ */
+ .set addr, 0
+ .rept (MEM_USER_INTRPT - PAGE_OFFSET) >> PGDIR_SHIFT
+ PTE addr + PAGE_OFFSET, addr, HV_PTE_READABLE | HV_PTE_WRITABLE
+ .set addr, addr + PGDIR_SIZE
+ .endr
+
+ /* The true text VAs are mapped as VA = PA + MEM_SV_INTRPT */
+ PTE MEM_SV_INTRPT, 0, HV_PTE_READABLE | HV_PTE_EXECUTABLE
+ .org swapper_pg_dir + HV_L1_SIZE
+ END(swapper_pg_dir)
+
+ /*
+ * Isolate swapper_pgprot to its own cache line, since each cpu
+ * starting up will read it using VA-is-PA and local homing.
+ * This would otherwise likely conflict with other data on the cache
+ * line, once we have set its permanent home in the page tables.
+ */
+ __INITDATA
+ .align CHIP_L2_LINE_SIZE()
+ENTRY(swapper_pgprot)
+ PTE 0, 0, HV_PTE_READABLE | HV_PTE_WRITABLE, 1
+ .align CHIP_L2_LINE_SIZE()
+ END(swapper_pgprot)
diff --git a/arch/tile/kernel/hvglue.lds b/arch/tile/kernel/hvglue.lds
new file mode 100644
index 000000000000..698489b4c7ab
--- /dev/null
+++ b/arch/tile/kernel/hvglue.lds
@@ -0,0 +1,56 @@
+/* Hypervisor call vector addresses; see <hv/hypervisor.h> */
+hv_init = TEXT_OFFSET + 0x10020;
+hv_install_context = TEXT_OFFSET + 0x10040;
+hv_sysconf = TEXT_OFFSET + 0x10060;
+hv_get_rtc = TEXT_OFFSET + 0x10080;
+hv_set_rtc = TEXT_OFFSET + 0x100a0;
+hv_flush_asid = TEXT_OFFSET + 0x100c0;
+hv_flush_page = TEXT_OFFSET + 0x100e0;
+hv_flush_pages = TEXT_OFFSET + 0x10100;
+hv_restart = TEXT_OFFSET + 0x10120;
+hv_halt = TEXT_OFFSET + 0x10140;
+hv_power_off = TEXT_OFFSET + 0x10160;
+hv_inquire_physical = TEXT_OFFSET + 0x10180;
+hv_inquire_memory_controller = TEXT_OFFSET + 0x101a0;
+hv_inquire_virtual = TEXT_OFFSET + 0x101c0;
+hv_inquire_asid = TEXT_OFFSET + 0x101e0;
+hv_nanosleep = TEXT_OFFSET + 0x10200;
+hv_console_read_if_ready = TEXT_OFFSET + 0x10220;
+hv_console_write = TEXT_OFFSET + 0x10240;
+hv_downcall_dispatch = TEXT_OFFSET + 0x10260;
+hv_inquire_topology = TEXT_OFFSET + 0x10280;
+hv_fs_findfile = TEXT_OFFSET + 0x102a0;
+hv_fs_fstat = TEXT_OFFSET + 0x102c0;
+hv_fs_pread = TEXT_OFFSET + 0x102e0;
+hv_physaddr_read64 = TEXT_OFFSET + 0x10300;
+hv_physaddr_write64 = TEXT_OFFSET + 0x10320;
+hv_get_command_line = TEXT_OFFSET + 0x10340;
+hv_set_caching = TEXT_OFFSET + 0x10360;
+hv_bzero_page = TEXT_OFFSET + 0x10380;
+hv_register_message_state = TEXT_OFFSET + 0x103a0;
+hv_send_message = TEXT_OFFSET + 0x103c0;
+hv_receive_message = TEXT_OFFSET + 0x103e0;
+hv_inquire_context = TEXT_OFFSET + 0x10400;
+hv_start_all_tiles = TEXT_OFFSET + 0x10420;
+hv_dev_open = TEXT_OFFSET + 0x10440;
+hv_dev_close = TEXT_OFFSET + 0x10460;
+hv_dev_pread = TEXT_OFFSET + 0x10480;
+hv_dev_pwrite = TEXT_OFFSET + 0x104a0;
+hv_dev_poll = TEXT_OFFSET + 0x104c0;
+hv_dev_poll_cancel = TEXT_OFFSET + 0x104e0;
+hv_dev_preada = TEXT_OFFSET + 0x10500;
+hv_dev_pwritea = TEXT_OFFSET + 0x10520;
+hv_flush_remote = TEXT_OFFSET + 0x10540;
+hv_console_putc = TEXT_OFFSET + 0x10560;
+hv_inquire_tiles = TEXT_OFFSET + 0x10580;
+hv_confstr = TEXT_OFFSET + 0x105a0;
+hv_reexec = TEXT_OFFSET + 0x105c0;
+hv_set_command_line = TEXT_OFFSET + 0x105e0;
+hv_dev_register_intr_state = TEXT_OFFSET + 0x10600;
+hv_enable_intr = TEXT_OFFSET + 0x10620;
+hv_disable_intr = TEXT_OFFSET + 0x10640;
+hv_trigger_ipi = TEXT_OFFSET + 0x10660;
+hv_store_mapping = TEXT_OFFSET + 0x10680;
+hv_inquire_realpa = TEXT_OFFSET + 0x106a0;
+hv_flush_all = TEXT_OFFSET + 0x106c0;
+hv_glue_internals = TEXT_OFFSET + 0x106e0;
diff --git a/arch/tile/kernel/init_task.c b/arch/tile/kernel/init_task.c
new file mode 100644
index 000000000000..928b31870669
--- /dev/null
+++ b/arch/tile/kernel/init_task.c
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/init_task.h>
+#include <linux/mqueue.h>
+#include <linux/module.h>
+#include <linux/start_kernel.h>
+#include <linux/uaccess.h>
+
+static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
+static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
+
+/*
+ * Initial thread structure.
+ *
+ * We need to make sure that this is THREAD_SIZE aligned due to the
+ * way process stacks are handled. This is done by having a special
+ * "init_task" linker map entry..
+ */
+union thread_union init_thread_union __init_task_data = {
+ INIT_THREAD_INFO(init_task)
+};
+
+/*
+ * Initial task structure.
+ *
+ * All other task structs will be allocated on slabs in fork.c
+ */
+struct task_struct init_task = INIT_TASK(init_task);
+EXPORT_SYMBOL(init_task);
+
+/*
+ * per-CPU stack and boot info.
+ */
+DEFINE_PER_CPU(unsigned long, boot_sp) =
+ (unsigned long)init_stack + THREAD_SIZE;
+
+#ifdef CONFIG_SMP
+DEFINE_PER_CPU(unsigned long, boot_pc) = (unsigned long)start_kernel;
+#else
+/*
+ * The variable must be __initdata since it references __init code.
+ * With CONFIG_SMP it is per-cpu data, which is exempt from validation.
+ */
+unsigned long __initdata boot_pc = (unsigned long)start_kernel;
+#endif
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
new file mode 100644
index 000000000000..207271f0cce1
--- /dev/null
+++ b/arch/tile/kernel/intvec_32.S
@@ -0,0 +1,2006 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Linux interrupt vectors.
+ */
+
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <asm/ptrace.h>
+#include <asm/thread_info.h>
+#include <asm/unistd.h>
+#include <asm/irqflags.h>
+#include <asm/atomic.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+#include <arch/abi.h>
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+#ifdef CONFIG_PREEMPT
+# error "No support for kernel preemption currently"
+#endif
+
+#if INT_INTCTRL_1 < 32 || INT_INTCTL_1 >= 48
+# error INT_INTCTRL_1 coded to set high interrupt mask
+#endif
+
+#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg)
+
+#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR)
+
+#if !CHIP_HAS_WH64()
+ /* By making this an empty macro, we can use wh64 in the code. */
+ .macro wh64 reg
+ .endm
+#endif
+
+ .macro push_reg reg, ptr=sp, delta=-4
+ {
+ sw \ptr, \reg
+ addli \ptr, \ptr, \delta
+ }
+ .endm
+
+ .macro pop_reg reg, ptr=sp, delta=4
+ {
+ lw \reg, \ptr
+ addli \ptr, \ptr, \delta
+ }
+ .endm
+
+ .macro pop_reg_zero reg, zreg, ptr=sp, delta=4
+ {
+ move \zreg, zero
+ lw \reg, \ptr
+ addi \ptr, \ptr, \delta
+ }
+ .endm
+
+ .macro push_extra_callee_saves reg
+ PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51))
+ push_reg r51, \reg
+ push_reg r50, \reg
+ push_reg r49, \reg
+ push_reg r48, \reg
+ push_reg r47, \reg
+ push_reg r46, \reg
+ push_reg r45, \reg
+ push_reg r44, \reg
+ push_reg r43, \reg
+ push_reg r42, \reg
+ push_reg r41, \reg
+ push_reg r40, \reg
+ push_reg r39, \reg
+ push_reg r38, \reg
+ push_reg r37, \reg
+ push_reg r36, \reg
+ push_reg r35, \reg
+ push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34)
+ .endm
+
+ .macro panic str
+ .pushsection .rodata, "a"
+1:
+ .asciz "\str"
+ .popsection
+ {
+ moveli r0, lo16(1b)
+ }
+ {
+ auli r0, r0, ha16(1b)
+ jal panic
+ }
+ .endm
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+ .pushsection .text.intvec_feedback,"ax"
+intvec_feedback:
+ .popsection
+#endif
+
+ /*
+ * Default interrupt handler.
+ *
+ * vecnum is where we'll put this code.
+ * c_routine is the C routine we'll call.
+ *
+ * The C routine is passed two arguments:
+ * - A pointer to the pt_regs state.
+ * - The interrupt vector number.
+ *
+ * The "processing" argument specifies the code for processing
+ * the interrupt. Defaults to "handle_interrupt".
+ */
+ .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt
+ .org (\vecnum << 8)
+intvec_\vecname:
+ .ifc \vecnum, INT_SWINT_1
+ blz TREG_SYSCALL_NR_NAME, sys_cmpxchg
+ .endif
+
+ /* Temporarily save a register so we have somewhere to work. */
+
+ mtspr SYSTEM_SAVE_1_1, r0
+ mfspr r0, EX_CONTEXT_1_1
+
+ /* The cmpxchg code clears sp to force us to reset it here on fault. */
+ {
+ bz sp, 2f
+ andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
+ }
+
+ .ifc \vecnum, INT_DOUBLE_FAULT
+ /*
+ * For double-faults from user-space, fall through to the normal
+ * register save and stack setup path. Otherwise, it's the
+ * hypervisor giving us one last chance to dump diagnostics, and we
+ * branch to the kernel_double_fault routine to do so.
+ */
+ bz r0, 1f
+ j _kernel_double_fault
+1:
+ .else
+ /*
+ * If we're coming from user-space, then set sp to the top of
+ * the kernel stack. Otherwise, assume sp is already valid.
+ */
+ {
+ bnz r0, 0f
+ move r0, sp
+ }
+ .endif
+
+ .ifc \c_routine, do_page_fault
+ /*
+ * The page_fault handler may be downcalled directly by the
+ * hypervisor even when Linux is running and has ICS set.
+ *
+ * In this case the contents of EX_CONTEXT_1_1 reflect the
+ * previous fault and can't be relied on to choose whether or
+ * not to reinitialize the stack pointer. So we add a test
+ * to see whether SYSTEM_SAVE_1_2 has the high bit set,
+ * and if so we don't reinitialize sp, since we must be coming
+ * from Linux. (In fact the precise case is !(val & ~1),
+ * but any Linux PC has to have the high bit set.)
+ *
+ * Note that the hypervisor *always* sets SYSTEM_SAVE_1_2 for
+ * any path that turns into a downcall to one of our TLB handlers.
+ */
+ mfspr r0, SYSTEM_SAVE_1_2
+ {
+ blz r0, 0f /* high bit in S_S_1_2 is for a PC to use */
+ move r0, sp
+ }
+ .endif
+
+2:
+ /*
+ * SYSTEM_SAVE_1_0 holds the cpu number in the low bits, and
+ * the current stack top in the higher bits. So we recover
+ * our stack top by just masking off the low bits, then
+ * point sp at the top aligned address on the actual stack page.
+ */
+ mfspr r0, SYSTEM_SAVE_1_0
+ mm r0, r0, zero, LOG2_THREAD_SIZE, 31
+
+0:
+ /*
+ * Align the stack mod 64 so we can properly predict what
+ * cache lines we need to write-hint to reduce memory fetch
+ * latency as we enter the kernel. The layout of memory is
+ * as follows, with cache line 0 at the lowest VA, and cache
+ * line 4 just below the r0 value this "andi" computes.
+ * Note that we never write to cache line 4, and we skip
+ * cache line 1 for syscalls.
+ *
+ * cache line 4: ptregs padding (two words)
+ * cache line 3: r46...lr, pc, ex1, faultnum, orig_r0, flags, pad
+ * cache line 2: r30...r45
+ * cache line 1: r14...r29
+ * cache line 0: 2 x frame, r0..r13
+ */
+ andi r0, r0, -64
+
+ /*
+ * Push the first four registers on the stack, so that we can set
+ * them to vector-unique values before we jump to the common code.
+ *
+ * Registers are pushed on the stack as a struct pt_regs,
+ * with the sp initially just above the struct, and when we're
+ * done, sp points to the base of the struct, minus
+ * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code.
+ *
+ * This routine saves just the first four registers, plus the
+ * stack context so we can do proper backtracing right away,
+ * and defers to handle_interrupt to save the rest.
+ * The backtracer needs pc, ex1, lr, sp, r52, and faultnum.
+ */
+ addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP)
+ wh64 r0 /* cache line 3 */
+ {
+ sw r0, lr
+ addli r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
+ }
+ {
+ sw r0, sp
+ addli sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP
+ }
+ {
+ sw sp, r52
+ addli sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52)
+ }
+ wh64 sp /* cache line 0 */
+ {
+ sw sp, r1
+ addli sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1)
+ }
+ {
+ sw sp, r2
+ addli sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2)
+ }
+ {
+ sw sp, r3
+ addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3)
+ }
+ mfspr r0, EX_CONTEXT_1_0
+ .ifc \processing,handle_syscall
+ /*
+ * Bump the saved PC by one bundle so that when we return, we won't
+ * execute the same swint instruction again. We need to do this while
+ * we're in the critical section.
+ */
+ addi r0, r0, 8
+ .endif
+ {
+ sw sp, r0
+ addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+ }
+ mfspr r0, EX_CONTEXT_1_1
+ {
+ sw sp, r0
+ addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
+ /*
+ * Use r0 for syscalls so it's a temporary; use r1 for interrupts
+ * so that it gets passed through unchanged to the handler routine.
+ * Note that the .if conditional confusingly spans bundles.
+ */
+ .ifc \processing,handle_syscall
+ movei r0, \vecnum
+ }
+ {
+ sw sp, r0
+ .else
+ movei r1, \vecnum
+ }
+ {
+ sw sp, r1
+ .endif
+ addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM
+ }
+ mfspr r0, SYSTEM_SAVE_1_1 /* Original r0 */
+ {
+ sw sp, r0
+ addi sp, sp, -PTREGS_OFFSET_REG(0) - 4
+ }
+ {
+ sw sp, zero /* write zero into "Next SP" frame pointer */
+ addi sp, sp, -4 /* leave SP pointing at bottom of frame */
+ }
+ .ifc \processing,handle_syscall
+ j handle_syscall
+ .else
+ /*
+ * Capture per-interrupt SPR context to registers.
+ * We overload the meaning of r3 on this path such that if its bit 31
+ * is set, we have to mask all interrupts including NMIs before
+ * clearing the interrupt critical section bit.
+ * See discussion below at "finish_interrupt_save".
+ */
+ .ifc \c_routine, do_page_fault
+ mfspr r2, SYSTEM_SAVE_1_3 /* address of page fault */
+ mfspr r3, SYSTEM_SAVE_1_2 /* info about page fault */
+ .else
+ .ifc \vecnum, INT_DOUBLE_FAULT
+ {
+ mfspr r2, SYSTEM_SAVE_1_2 /* double fault info from HV */
+ movei r3, 0
+ }
+ .else
+ .ifc \c_routine, do_trap
+ {
+ mfspr r2, GPV_REASON
+ movei r3, 0
+ }
+ .else
+ .ifc \c_routine, op_handle_perf_interrupt
+ {
+ mfspr r2, PERF_COUNT_STS
+ movei r3, -1 /* not used, but set for consistency */
+ }
+ .else
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+ .ifc \c_routine, op_handle_aux_perf_interrupt
+ {
+ mfspr r2, AUX_PERF_COUNT_STS
+ movei r3, -1 /* not used, but set for consistency */
+ }
+ .else
+#endif
+ movei r3, 0
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+ .endif
+#endif
+ .endif
+ .endif
+ .endif
+ .endif
+ /* Put function pointer in r0 */
+ moveli r0, lo16(\c_routine)
+ {
+ auli r0, r0, ha16(\c_routine)
+ j \processing
+ }
+ .endif
+ ENDPROC(intvec_\vecname)
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+ .pushsection .text.intvec_feedback,"ax"
+ .org (\vecnum << 5)
+ FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8)
+ jrp lr
+ .popsection
+#endif
+
+ .endm
+
+
+ /*
+ * Save the rest of the registers that we didn't save in the actual
+ * vector itself. We can't use r0-r10 inclusive here.
+ */
+ .macro finish_interrupt_save, function
+
+ /* If it's a syscall, save a proper orig_r0, otherwise just zero. */
+ PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0)
+ {
+ .ifc \function,handle_syscall
+ sw r52, r0
+ .else
+ sw r52, zero
+ .endif
+ PTREGS_PTR(r52, PTREGS_OFFSET_TP)
+ }
+
+ /*
+ * For ordinary syscalls, we save neither caller- nor callee-
+ * save registers, since the syscall invoker doesn't expect the
+ * caller-saves to be saved, and the called kernel functions will
+ * take care of saving the callee-saves for us.
+ *
+ * For interrupts we save just the caller-save registers. Saving
+ * them is required (since the "caller" can't save them). Again,
+ * the called kernel functions will restore the callee-save
+ * registers for us appropriately.
+ *
+ * On return, we normally restore nothing special for syscalls,
+ * and just the caller-save registers for interrupts.
+ *
+ * However, there are some important caveats to all this:
+ *
+ * - We always save a few callee-save registers to give us
+ * some scratchpad registers to carry across function calls.
+ *
+ * - fork/vfork/etc require us to save all the callee-save
+ * registers, which we do in PTREGS_SYSCALL_ALL_REGS, below.
+ *
+ * - We always save r0..r5 and r10 for syscalls, since we need
+ * to reload them a bit later for the actual kernel call, and
+ * since we might need them for -ERESTARTNOINTR, etc.
+ *
+ * - Before invoking a signal handler, we save the unsaved
+ * callee-save registers so they are visible to the
+ * signal handler or any ptracer.
+ *
+ * - If the unsaved callee-save registers are modified, we set
+ * a bit in pt_regs so we know to reload them from pt_regs
+ * and not just rely on the kernel function unwinding.
+ * (Done for ptrace register writes and SA_SIGINFO handler.)
+ */
+ {
+ sw r52, tp
+ PTREGS_PTR(r52, PTREGS_OFFSET_REG(33))
+ }
+ wh64 r52 /* cache line 2 */
+ push_reg r33, r52
+ push_reg r32, r52
+ push_reg r31, r52
+ .ifc \function,handle_syscall
+ push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30)
+ push_reg TREG_SYSCALL_NR_NAME, r52, \
+ PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL
+ .else
+
+ push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30)
+ wh64 r52 /* cache line 1 */
+ push_reg r29, r52
+ push_reg r28, r52
+ push_reg r27, r52
+ push_reg r26, r52
+ push_reg r25, r52
+ push_reg r24, r52
+ push_reg r23, r52
+ push_reg r22, r52
+ push_reg r21, r52
+ push_reg r20, r52
+ push_reg r19, r52
+ push_reg r18, r52
+ push_reg r17, r52
+ push_reg r16, r52
+ push_reg r15, r52
+ push_reg r14, r52
+ push_reg r13, r52
+ push_reg r12, r52
+ push_reg r11, r52
+ push_reg r10, r52
+ push_reg r9, r52
+ push_reg r8, r52
+ push_reg r7, r52
+ push_reg r6, r52
+
+ .endif
+
+ push_reg r5, r52
+ sw r52, r4
+
+ /* Load tp with our per-cpu offset. */
+#ifdef CONFIG_SMP
+ {
+ mfspr r20, SYSTEM_SAVE_1_0
+ moveli r21, lo16(__per_cpu_offset)
+ }
+ {
+ auli r21, r21, ha16(__per_cpu_offset)
+ mm r20, r20, zero, 0, LOG2_THREAD_SIZE-1
+ }
+ s2a r20, r20, r21
+ lw tp, r20
+#else
+ move tp, zero
+#endif
+
+ /*
+ * If we will be returning to the kernel, we will need to
+ * reset the interrupt masks to the state they had before.
+ * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled.
+ * We load flags in r32 here so we can jump to .Lrestore_regs
+ * directly after do_page_fault_ics() if necessary.
+ */
+ mfspr r32, EX_CONTEXT_1_1
+ {
+ andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
+ PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS)
+ }
+ bzt r32, 1f /* zero if from user space */
+ IRQS_DISABLED(r32) /* zero if irqs enabled */
+#if PT_FLAGS_DISABLE_IRQ != 1
+# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix
+#endif
+1:
+ .ifnc \function,handle_syscall
+ /* Record the fact that we saved the caller-save registers above. */
+ ori r32, r32, PT_FLAGS_CALLER_SAVES
+ .endif
+ sw r21, r32
+
+#ifdef __COLLECT_LINKER_FEEDBACK__
+ /*
+ * Notify the feedback routines that we were in the
+ * appropriate fixed interrupt vector area. Note that we
+ * still have ICS set at this point, so we can't invoke any
+ * atomic operations or we will panic. The feedback
+ * routines internally preserve r0..r10 and r30 up.
+ */
+ .ifnc \function,handle_syscall
+ shli r20, r1, 5
+ .else
+ moveli r20, INT_SWINT_1 << 5
+ .endif
+ addli r20, r20, lo16(intvec_feedback)
+ auli r20, r20, ha16(intvec_feedback)
+ jalr r20
+
+ /* And now notify the feedback routines that we are here. */
+ FEEDBACK_ENTER(\function)
+#endif
+
+ /*
+ * we've captured enough state to the stack (including in
+ * particular our EX_CONTEXT state) that we can now release
+ * the interrupt critical section and replace it with our
+ * standard "interrupts disabled" mask value. This allows
+ * synchronous interrupts (and profile interrupts) to punch
+ * through from this point onwards.
+ *
+ * If bit 31 of r3 is set during a non-NMI interrupt, we know we
+ * are on the path where the hypervisor has punched through our
+ * ICS with a page fault, so we call out to do_page_fault_ics()
+ * to figure out what to do with it. If the fault was in
+ * an atomic op, we unlock the atomic lock, adjust the
+ * saved register state a little, and return "zero" in r4,
+ * falling through into the normal page-fault interrupt code.
+ * If the fault was in a kernel-space atomic operation, then
+ * do_page_fault_ics() resolves it itself, returns "one" in r4,
+ * and as a result goes directly to restoring registers and iret,
+ * without trying to adjust the interrupt masks at all.
+ * The do_page_fault_ics() API involves passing and returning
+ * a five-word struct (in registers) to avoid writing the
+ * save and restore code here.
+ */
+ .ifc \function,handle_nmi
+ IRQ_DISABLE_ALL(r20)
+ .else
+ .ifnc \function,handle_syscall
+ bgezt r3, 1f
+ {
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ jal do_page_fault_ics
+ }
+ FEEDBACK_REENTER(\function)
+ bzt r4, 1f
+ j .Lrestore_regs
+1:
+ .endif
+ IRQ_DISABLE(r20, r21)
+ .endif
+ mtspr INTERRUPT_CRITICAL_SECTION, zero
+
+#if CHIP_HAS_WH64()
+ /*
+ * Prepare the first 256 stack bytes to be rapidly accessible
+ * without having to fetch the background data. We don't really
+ * know how far to write-hint, but kernel stacks generally
+ * aren't that big, and write-hinting here does take some time.
+ */
+ addi r52, sp, -64
+ {
+ wh64 r52
+ addi r52, r52, -64
+ }
+ {
+ wh64 r52
+ addi r52, r52, -64
+ }
+ {
+ wh64 r52
+ addi r52, r52, -64
+ }
+ wh64 r52
+#endif
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ .ifnc \function,handle_nmi
+ /*
+ * We finally have enough state set up to notify the irq
+ * tracing code that irqs were disabled on entry to the handler.
+ * The TRACE_IRQS_OFF call clobbers registers r0-r29.
+ * For syscalls, we already have the register state saved away
+ * on the stack, so we don't bother to do any register saves here,
+ * and later we pop the registers back off the kernel stack.
+ * For interrupt handlers, save r0-r3 in callee-saved registers.
+ */
+ .ifnc \function,handle_syscall
+ { move r30, r0; move r31, r1 }
+ { move r32, r2; move r33, r3 }
+ .endif
+ TRACE_IRQS_OFF
+ .ifnc \function,handle_syscall
+ { move r0, r30; move r1, r31 }
+ { move r2, r32; move r3, r33 }
+ .endif
+ .endif
+#endif
+
+ .endm
+
+ .macro check_single_stepping, kind, not_single_stepping
+ /*
+ * Check for single stepping in user-level priv
+ * kind can be "normal", "ill", or "syscall"
+ * At end, if fall-thru
+ * r29: thread_info->step_state
+ * r28: &pt_regs->pc
+ * r27: pt_regs->pc
+ * r26: thread_info->step_state->buffer
+ */
+
+ /* Check for single stepping */
+ GET_THREAD_INFO(r29)
+ {
+ /* Get pointer to field holding step state */
+ addi r29, r29, THREAD_INFO_STEP_STATE_OFFSET
+
+ /* Get pointer to EX1 in register state */
+ PTREGS_PTR(r27, PTREGS_OFFSET_EX1)
+ }
+ {
+ /* Get pointer to field holding PC */
+ PTREGS_PTR(r28, PTREGS_OFFSET_PC)
+
+ /* Load the pointer to the step state */
+ lw r29, r29
+ }
+ /* Load EX1 */
+ lw r27, r27
+ {
+ /* Points to flags */
+ addi r23, r29, SINGLESTEP_STATE_FLAGS_OFFSET
+
+ /* No single stepping if there is no step state structure */
+ bzt r29, \not_single_stepping
+ }
+ {
+ /* mask off ICS and any other high bits */
+ andi r27, r27, SPR_EX_CONTEXT_1_1__PL_MASK
+
+ /* Load pointer to single step instruction buffer */
+ lw r26, r29
+ }
+ /* Check priv state */
+ bnz r27, \not_single_stepping
+
+ /* Get flags */
+ lw r22, r23
+ {
+ /* Branch if single-step mode not enabled */
+ bbnst r22, \not_single_stepping
+
+ /* Clear enabled flag */
+ andi r22, r22, ~SINGLESTEP_STATE_MASK_IS_ENABLED
+ }
+ .ifc \kind,normal
+ {
+ /* Load PC */
+ lw r27, r28
+
+ /* Point to the entry containing the original PC */
+ addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET
+ }
+ {
+ /* Disable single stepping flag */
+ sw r23, r22
+ }
+ {
+ /* Get the original pc */
+ lw r24, r24
+
+ /* See if the PC is at the start of the single step buffer */
+ seq r25, r26, r27
+ }
+ /*
+ * NOTE: it is really expected that the PC be in the single step buffer
+ * at this point
+ */
+ bzt r25, \not_single_stepping
+
+ /* Restore the original PC */
+ sw r28, r24
+ .else
+ .ifc \kind,syscall
+ {
+ /* Load PC */
+ lw r27, r28
+
+ /* Point to the entry containing the next PC */
+ addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET
+ }
+ {
+ /* Increment the stopped PC by the bundle size */
+ addi r26, r26, 8
+
+ /* Disable single stepping flag */
+ sw r23, r22
+ }
+ {
+ /* Get the next pc */
+ lw r24, r24
+
+ /*
+ * See if the PC is one bundle past the start of the
+ * single step buffer
+ */
+ seq r25, r26, r27
+ }
+ {
+ /*
+ * NOTE: it is really expected that the PC be in the
+ * single step buffer at this point
+ */
+ bzt r25, \not_single_stepping
+ }
+ /* Set to the next PC */
+ sw r28, r24
+ .else
+ {
+ /* Point to 3rd bundle in buffer */
+ addi r25, r26, 16
+
+ /* Load PC */
+ lw r27, r28
+ }
+ {
+ /* Disable single stepping flag */
+ sw r23, r22
+
+ /* See if the PC is in the single step buffer */
+ slte_u r24, r26, r27
+ }
+ {
+ slte_u r25, r27, r25
+
+ /*
+ * NOTE: it is really expected that the PC be in the
+ * single step buffer at this point
+ */
+ bzt r24, \not_single_stepping
+ }
+ bzt r25, \not_single_stepping
+ .endif
+ .endif
+ .endm
+
+ /*
+ * Redispatch a downcall.
+ */
+ .macro dc_dispatch vecnum, vecname
+ .org (\vecnum << 8)
+intvec_\vecname:
+ j hv_downcall_dispatch
+ ENDPROC(intvec_\vecname)
+ .endm
+
+ /*
+ * Common code for most interrupts. The C function we're eventually
+ * going to is in r0, and the faultnum is in r1; the original
+ * values for those registers are on the stack.
+ */
+ .pushsection .text.handle_interrupt,"ax"
+handle_interrupt:
+ finish_interrupt_save handle_interrupt
+
+ /*
+ * Check for if we are single stepping in user level. If so, then
+ * we need to restore the PC.
+ */
+
+ check_single_stepping normal, .Ldispatch_interrupt
+.Ldispatch_interrupt:
+
+ /* Jump to the C routine; it should enable irqs as soon as possible. */
+ {
+ jalr r0
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ }
+ FEEDBACK_REENTER(handle_interrupt)
+ {
+ movei r30, 0 /* not an NMI */
+ j interrupt_return
+ }
+ STD_ENDPROC(handle_interrupt)
+
+/*
+ * This routine takes a boolean in r30 indicating if this is an NMI.
+ * If so, we also expect a boolean in r31 indicating whether to
+ * re-enable the oprofile interrupts.
+ */
+STD_ENTRY(interrupt_return)
+ /* If we're resuming to kernel space, don't check thread flags. */
+ {
+ bnz r30, .Lrestore_all /* NMIs don't special-case user-space */
+ PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
+ }
+ lw r29, r29
+ andi r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
+ {
+ bzt r29, .Lresume_userspace
+ PTREGS_PTR(r29, PTREGS_OFFSET_PC)
+ }
+
+ /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */
+ {
+ lw r28, r29
+ moveli r27, lo16(_cpu_idle_nap)
+ }
+ {
+ auli r27, r27, ha16(_cpu_idle_nap)
+ }
+ {
+ seq r27, r27, r28
+ }
+ {
+ bbns r27, .Lrestore_all
+ addi r28, r28, 8
+ }
+ sw r29, r28
+ j .Lrestore_all
+
+.Lresume_userspace:
+ FEEDBACK_REENTER(interrupt_return)
+
+ /*
+ * Disable interrupts so as to make sure we don't
+ * miss an interrupt that sets any of the thread flags (like
+ * need_resched or sigpending) between sampling and the iret.
+ * Routines like schedule() or do_signal() may re-enable
+ * interrupts before returning.
+ */
+ IRQ_DISABLE(r20, r21)
+ TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */
+
+ /* Get base of stack in r32; note r30/31 are used as arguments here. */
+ GET_THREAD_INFO(r32)
+
+
+ /* Check to see if there is any work to do before returning to user. */
+ {
+ addi r29, r32, THREAD_INFO_FLAGS_OFFSET
+ moveli r28, lo16(_TIF_ALLWORK_MASK)
+ }
+ {
+ lw r29, r29
+ auli r28, r28, ha16(_TIF_ALLWORK_MASK)
+ }
+ and r28, r29, r28
+ bnz r28, .Lwork_pending
+
+ /*
+ * In the NMI case we
+ * omit the call to single_process_check_nohz, which normally checks
+ * to see if we should start or stop the scheduler tick, because
+ * we can't call arbitrary Linux code from an NMI context.
+ * We always call the homecache TLB deferral code to re-trigger
+ * the deferral mechanism.
+ *
+ * The other chunk of responsibility this code has is to reset the
+ * interrupt masks appropriately to reset irqs and NMIs. We have
+ * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the
+ * lockdep-type stuff, but we can't set ICS until afterwards, since
+ * ICS can only be used in very tight chunks of code to avoid
+ * tripping over various assertions that it is off.
+ *
+ * (There is what looks like a window of vulnerability here since
+ * we might take a profile interrupt between the two SPR writes
+ * that set the mask, but since we write the low SPR word first,
+ * and our interrupt entry code checks the low SPR word, any
+ * profile interrupt will actually disable interrupts in both SPRs
+ * before returning, which is OK.)
+ */
+.Lrestore_all:
+ PTREGS_PTR(r0, PTREGS_OFFSET_EX1)
+ {
+ lw r0, r0
+ PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS)
+ }
+ {
+ andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK
+ lw r32, r32
+ }
+ bnz r0, 1f
+ j 2f
+#if PT_FLAGS_DISABLE_IRQ != 1
+# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use bbnst below
+#endif
+1: bbnst r32, 2f
+ IRQ_DISABLE(r20,r21)
+ TRACE_IRQS_OFF
+ movei r0, 1
+ mtspr INTERRUPT_CRITICAL_SECTION, r0
+ bzt r30, .Lrestore_regs
+ j 3f
+2: TRACE_IRQS_ON
+ movei r0, 1
+ mtspr INTERRUPT_CRITICAL_SECTION, r0
+ IRQ_ENABLE(r20, r21)
+ bzt r30, .Lrestore_regs
+3:
+
+
+ /*
+ * We now commit to returning from this interrupt, since we will be
+ * doing things like setting EX_CONTEXT SPRs and unwinding the stack
+ * frame. No calls should be made to any other code after this point.
+ * This code should only be entered with ICS set.
+ * r32 must still be set to ptregs.flags.
+ * We launch loads to each cache line separately first, so we can
+ * get some parallelism out of the memory subsystem.
+ * We start zeroing caller-saved registers throughout, since
+ * that will save some cycles if this turns out to be a syscall.
+ */
+.Lrestore_regs:
+ FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */
+
+ /*
+ * Rotate so we have one high bit and one low bit to test.
+ * - low bit says whether to restore all the callee-saved registers,
+ * or just r30-r33, and r52 up.
+ * - high bit (i.e. sign bit) says whether to restore all the
+ * caller-saved registers, or just r0.
+ */
+#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4
+# error Rotate trick does not work :-)
+#endif
+ {
+ rli r20, r32, 30
+ PTREGS_PTR(sp, PTREGS_OFFSET_REG(0))
+ }
+
+ /*
+ * Load cache lines 0, 2, and 3 in that order, then use
+ * the last loaded value, which makes it likely that the other
+ * cache lines have also loaded, at which point we should be
+ * able to safely read all the remaining words on those cache
+ * lines without waiting for the memory subsystem.
+ */
+ pop_reg_zero r0, r1, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0)
+ pop_reg_zero r30, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(30)
+ pop_reg_zero r21, r3, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+ pop_reg_zero lr, r4, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_EX1
+ {
+ mtspr EX_CONTEXT_1_0, r21
+ move r5, zero
+ }
+ {
+ mtspr EX_CONTEXT_1_1, lr
+ andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
+ }
+
+ /* Restore callee-saveds that we actually use. */
+ pop_reg_zero r52, r6, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_REG(52)
+ pop_reg_zero r31, r7
+ pop_reg_zero r32, r8
+ pop_reg_zero r33, r9, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33)
+
+ /*
+ * If we modified other callee-saveds, restore them now.
+ * This is rare, but could be via ptrace or signal handler.
+ */
+ {
+ move r10, zero
+ bbs r20, .Lrestore_callees
+ }
+.Lcontinue_restore_regs:
+
+ /* Check if we're returning from a syscall. */
+ {
+ move r11, zero
+ blzt r20, 1f /* no, so go restore callee-save registers */
+ }
+
+ /*
+ * Check if we're returning to userspace.
+ * Note that if we're not, we don't worry about zeroing everything.
+ */
+ {
+ addli sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29)
+ bnz lr, .Lkernel_return
+ }
+
+ /*
+ * On return from syscall, we've restored r0 from pt_regs, but we
+ * clear the remainder of the caller-saved registers. We could
+ * restore the syscall arguments, but there's not much point,
+ * and it ensures user programs aren't trying to use the
+ * caller-saves if we clear them, as well as avoiding leaking
+ * kernel pointers into userspace.
+ */
+ pop_reg_zero lr, r12, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
+ pop_reg_zero tp, r13, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
+ {
+ lw sp, sp
+ move r14, zero
+ move r15, zero
+ }
+ { move r16, zero; move r17, zero }
+ { move r18, zero; move r19, zero }
+ { move r20, zero; move r21, zero }
+ { move r22, zero; move r23, zero }
+ { move r24, zero; move r25, zero }
+ { move r26, zero; move r27, zero }
+ { move r28, zero; move r29, zero }
+ iret
+
+ /*
+ * Not a syscall, so restore caller-saved registers.
+ * First kick off a load for cache line 1, which we're touching
+ * for the first time here.
+ */
+ .align 64
+1: pop_reg r29, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(29)
+ pop_reg r1
+ pop_reg r2
+ pop_reg r3
+ pop_reg r4
+ pop_reg r5
+ pop_reg r6
+ pop_reg r7
+ pop_reg r8
+ pop_reg r9
+ pop_reg r10
+ pop_reg r11
+ pop_reg r12
+ pop_reg r13
+ pop_reg r14
+ pop_reg r15
+ pop_reg r16
+ pop_reg r17
+ pop_reg r18
+ pop_reg r19
+ pop_reg r20
+ pop_reg r21
+ pop_reg r22
+ pop_reg r23
+ pop_reg r24
+ pop_reg r25
+ pop_reg r26
+ pop_reg r27
+ pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28)
+ /* r29 already restored above */
+ bnz lr, .Lkernel_return
+ pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR
+ pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP
+ lw sp, sp
+ iret
+
+ /*
+ * We can't restore tp when in kernel mode, since a thread might
+ * have migrated from another cpu and brought a stale tp value.
+ */
+.Lkernel_return:
+ pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR
+ lw sp, sp
+ iret
+
+ /* Restore callee-saved registers from r34 to r51. */
+.Lrestore_callees:
+ addli sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29)
+ pop_reg r34
+ pop_reg r35
+ pop_reg r36
+ pop_reg r37
+ pop_reg r38
+ pop_reg r39
+ pop_reg r40
+ pop_reg r41
+ pop_reg r42
+ pop_reg r43
+ pop_reg r44
+ pop_reg r45
+ pop_reg r46
+ pop_reg r47
+ pop_reg r48
+ pop_reg r49
+ pop_reg r50
+ pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51)
+ j .Lcontinue_restore_regs
+
+.Lwork_pending:
+ /* Mask the reschedule flag */
+ andi r28, r29, _TIF_NEED_RESCHED
+
+ {
+ /*
+ * If the NEED_RESCHED flag is called, we call schedule(), which
+ * may drop this context right here and go do something else.
+ * On return, jump back to .Lresume_userspace and recheck.
+ */
+ bz r28, .Lasync_tlb
+
+ /* Mask the async-tlb flag */
+ andi r28, r29, _TIF_ASYNC_TLB
+ }
+
+ jal schedule
+ FEEDBACK_REENTER(interrupt_return)
+
+ /* Reload the flags and check again */
+ j .Lresume_userspace
+
+.Lasync_tlb:
+ {
+ bz r28, .Lneed_sigpending
+
+ /* Mask the sigpending flag */
+ andi r28, r29, _TIF_SIGPENDING
+ }
+
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ jal do_async_page_fault
+ FEEDBACK_REENTER(interrupt_return)
+
+ /*
+ * Go restart the "resume userspace" process. We may have
+ * fired a signal, and we need to disable interrupts again.
+ */
+ j .Lresume_userspace
+
+.Lneed_sigpending:
+ /*
+ * At this point we are either doing signal handling or single-step,
+ * so either way make sure we have all the registers saved.
+ */
+ push_extra_callee_saves r0
+
+ {
+ /* If no signal pending, skip to singlestep check */
+ bz r28, .Lneed_singlestep
+
+ /* Mask the singlestep flag */
+ andi r28, r29, _TIF_SINGLESTEP
+ }
+
+ jal do_signal
+ FEEDBACK_REENTER(interrupt_return)
+
+ /* Reload the flags and check again */
+ j .Lresume_userspace
+
+.Lneed_singlestep:
+ {
+ /* Get a pointer to the EX1 field */
+ PTREGS_PTR(r29, PTREGS_OFFSET_EX1)
+
+ /* If we get here, our bit must be set. */
+ bz r28, .Lwork_confusion
+ }
+ /* If we are in priv mode, don't single step */
+ lw r28, r29
+ andi r28, r28, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */
+ bnz r28, .Lrestore_all
+
+ /* Allow interrupts within the single step code */
+ TRACE_IRQS_ON /* Note: clobbers registers r0-r29 */
+ IRQ_ENABLE(r20, r21)
+
+ /* try to single-step the current instruction */
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ jal single_step_once
+ FEEDBACK_REENTER(interrupt_return)
+
+ /* Re-disable interrupts. TRACE_IRQS_OFF in .Lrestore_all. */
+ IRQ_DISABLE(r20,r21)
+
+ j .Lrestore_all
+
+.Lwork_confusion:
+ move r0, r28
+ panic "thread_info allwork flags unhandled on userspace resume: %#x"
+
+ STD_ENDPROC(interrupt_return)
+
+ /*
+ * This interrupt variant clears the INT_INTCTRL_1 interrupt mask bit
+ * before returning, so we can properly get more downcalls.
+ */
+ .pushsection .text.handle_interrupt_downcall,"ax"
+handle_interrupt_downcall:
+ finish_interrupt_save handle_interrupt_downcall
+ check_single_stepping normal, .Ldispatch_downcall
+.Ldispatch_downcall:
+
+ /* Clear INTCTRL_1 from the set of interrupts we ever enable. */
+ GET_INTERRUPTS_ENABLED_MASK_PTR(r30)
+ {
+ addi r30, r30, 4
+ movei r31, INT_MASK(INT_INTCTRL_1)
+ }
+ {
+ lw r20, r30
+ nor r21, r31, zero
+ }
+ and r20, r20, r21
+ sw r30, r20
+
+ {
+ jalr r0
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ }
+ FEEDBACK_REENTER(handle_interrupt_downcall)
+
+ /* Allow INTCTRL_1 to be enabled next time we enable interrupts. */
+ lw r20, r30
+ or r20, r20, r31
+ sw r30, r20
+
+ {
+ movei r30, 0 /* not an NMI */
+ j interrupt_return
+ }
+ STD_ENDPROC(handle_interrupt_downcall)
+
+ /*
+ * Some interrupts don't check for single stepping
+ */
+ .pushsection .text.handle_interrupt_no_single_step,"ax"
+handle_interrupt_no_single_step:
+ finish_interrupt_save handle_interrupt_no_single_step
+ {
+ jalr r0
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ }
+ FEEDBACK_REENTER(handle_interrupt_no_single_step)
+ {
+ movei r30, 0 /* not an NMI */
+ j interrupt_return
+ }
+ STD_ENDPROC(handle_interrupt_no_single_step)
+
+ /*
+ * "NMI" interrupts mask ALL interrupts before calling the
+ * handler, and don't check thread flags, etc., on the way
+ * back out. In general, the only things we do here for NMIs
+ * are the register save/restore, fixing the PC if we were
+ * doing single step, and the dataplane kernel-TLB management.
+ * We don't (for example) deal with start/stop of the sched tick.
+ */
+ .pushsection .text.handle_nmi,"ax"
+handle_nmi:
+ finish_interrupt_save handle_nmi
+ check_single_stepping normal, .Ldispatch_nmi
+.Ldispatch_nmi:
+ {
+ jalr r0
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ }
+ FEEDBACK_REENTER(handle_nmi)
+ j interrupt_return
+ STD_ENDPROC(handle_nmi)
+
+ /*
+ * Parallel code for syscalls to handle_interrupt.
+ */
+ .pushsection .text.handle_syscall,"ax"
+handle_syscall:
+ finish_interrupt_save handle_syscall
+
+ /*
+ * Check for if we are single stepping in user level. If so, then
+ * we need to restore the PC.
+ */
+ check_single_stepping syscall, .Ldispatch_syscall
+.Ldispatch_syscall:
+
+ /* Enable irqs. */
+ TRACE_IRQS_ON
+ IRQ_ENABLE(r20, r21)
+
+ /* Bump the counter for syscalls made on this tile. */
+ moveli r20, lo16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
+ auli r20, r20, ha16(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET)
+ add r20, r20, tp
+ lw r21, r20
+ addi r21, r21, 1
+ sw r20, r21
+
+ /* Trace syscalls, if requested. */
+ GET_THREAD_INFO(r31)
+ addi r31, r31, THREAD_INFO_FLAGS_OFFSET
+ lw r30, r31
+ andi r30, r30, _TIF_SYSCALL_TRACE
+ bzt r30, .Lrestore_syscall_regs
+ jal do_syscall_trace
+ FEEDBACK_REENTER(handle_syscall)
+
+ /*
+ * We always reload our registers from the stack at this
+ * point. They might be valid, if we didn't build with
+ * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not
+ * doing syscall tracing, but there are enough cases now that it
+ * seems simplest just to do the reload unconditionally.
+ */
+.Lrestore_syscall_regs:
+ PTREGS_PTR(r11, PTREGS_OFFSET_REG(0))
+ pop_reg r0, r11
+ pop_reg r1, r11
+ pop_reg r2, r11
+ pop_reg r3, r11
+ pop_reg r4, r11
+ pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5)
+ pop_reg TREG_SYSCALL_NR_NAME, r11
+
+ /* Ensure that the syscall number is within the legal range. */
+ moveli r21, __NR_syscalls
+ {
+ slt_u r21, TREG_SYSCALL_NR_NAME, r21
+ moveli r20, lo16(sys_call_table)
+ }
+ {
+ bbns r21, .Linvalid_syscall
+ auli r20, r20, ha16(sys_call_table)
+ }
+ s2a r20, TREG_SYSCALL_NR_NAME, r20
+ lw r20, r20
+
+ /* Jump to syscall handler. */
+ jalr r20; .Lhandle_syscall_link:
+ FEEDBACK_REENTER(handle_syscall)
+
+ /*
+ * Write our r0 onto the stack so it gets restored instead
+ * of whatever the user had there before.
+ */
+ PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
+ sw r29, r0
+
+ /* Do syscall trace again, if requested. */
+ lw r30, r31
+ andi r30, r30, _TIF_SYSCALL_TRACE
+ bzt r30, 1f
+ jal do_syscall_trace
+ FEEDBACK_REENTER(handle_syscall)
+1: j .Lresume_userspace /* jump into middle of interrupt_return */
+
+.Linvalid_syscall:
+ /* Report an invalid syscall back to the user program */
+ {
+ PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
+ movei r28, -ENOSYS
+ }
+ sw r29, r28
+ j .Lresume_userspace /* jump into middle of interrupt_return */
+ STD_ENDPROC(handle_syscall)
+
+ /* Return the address for oprofile to suppress in backtraces. */
+STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall)
+ lnk r0
+ {
+ addli r0, r0, .Lhandle_syscall_link - .
+ jrp lr
+ }
+ STD_ENDPROC(handle_syscall_link_address)
+
+STD_ENTRY(ret_from_fork)
+ jal sim_notify_fork
+ jal schedule_tail
+ FEEDBACK_REENTER(ret_from_fork)
+ j .Lresume_userspace /* jump into middle of interrupt_return */
+ STD_ENDPROC(ret_from_fork)
+
+ /*
+ * Code for ill interrupt.
+ */
+ .pushsection .text.handle_ill,"ax"
+handle_ill:
+ finish_interrupt_save handle_ill
+
+ /*
+ * Check for if we are single stepping in user level. If so, then
+ * we need to restore the PC.
+ */
+ check_single_stepping ill, .Ldispatch_normal_ill
+
+ {
+ /* See if the PC is the 1st bundle in the buffer */
+ seq r25, r27, r26
+
+ /* Point to the 2nd bundle in the buffer */
+ addi r26, r26, 8
+ }
+ {
+ /* Point to the original pc */
+ addi r24, r29, SINGLESTEP_STATE_ORIG_PC_OFFSET
+
+ /* Branch if the PC is the 1st bundle in the buffer */
+ bnz r25, 3f
+ }
+ {
+ /* See if the PC is the 2nd bundle of the buffer */
+ seq r25, r27, r26
+
+ /* Set PC to next instruction */
+ addi r24, r29, SINGLESTEP_STATE_NEXT_PC_OFFSET
+ }
+ {
+ /* Point to flags */
+ addi r25, r29, SINGLESTEP_STATE_FLAGS_OFFSET
+
+ /* Branch if PC is in the second bundle */
+ bz r25, 2f
+ }
+ /* Load flags */
+ lw r25, r25
+ {
+ /*
+ * Get the offset for the register to restore
+ * Note: the lower bound is 2, so we have implicit scaling by 4.
+ * No multiplication of the register number by the size of a register
+ * is needed.
+ */
+ mm r27, r25, zero, SINGLESTEP_STATE_TARGET_LB, \
+ SINGLESTEP_STATE_TARGET_UB
+
+ /* Mask Rewrite_LR */
+ andi r25, r25, SINGLESTEP_STATE_MASK_UPDATE
+ }
+ {
+ addi r29, r29, SINGLESTEP_STATE_UPDATE_VALUE_OFFSET
+
+ /* Don't rewrite temp register */
+ bz r25, 3f
+ }
+ {
+ /* Get the temp value */
+ lw r29, r29
+
+ /* Point to where the register is stored */
+ add r27, r27, sp
+ }
+
+ /* Add in the C ABI save area size to the register offset */
+ addi r27, r27, C_ABI_SAVE_AREA_SIZE
+
+ /* Restore the user's register with the temp value */
+ sw r27, r29
+ j 3f
+
+2:
+ /* Must be in the third bundle */
+ addi r24, r29, SINGLESTEP_STATE_BRANCH_NEXT_PC_OFFSET
+
+3:
+ /* set PC and continue */
+ lw r26, r24
+ sw r28, r26
+
+ /* Clear TIF_SINGLESTEP */
+ GET_THREAD_INFO(r0)
+
+ addi r1, r0, THREAD_INFO_FLAGS_OFFSET
+ {
+ lw r2, r1
+ addi r0, r0, THREAD_INFO_TASK_OFFSET /* currently a no-op */
+ }
+ andi r2, r2, ~_TIF_SINGLESTEP
+ sw r1, r2
+
+ /* Issue a sigtrap */
+ {
+ lw r0, r0 /* indirect thru thread_info to get task_info*/
+ addi r1, sp, C_ABI_SAVE_AREA_SIZE /* put ptregs pointer into r1 */
+ move r2, zero /* load error code into r2 */
+ }
+
+ jal send_sigtrap /* issue a SIGTRAP */
+ FEEDBACK_REENTER(handle_ill)
+ j .Lresume_userspace /* jump into middle of interrupt_return */
+
+.Ldispatch_normal_ill:
+ {
+ jalr r0
+ PTREGS_PTR(r0, PTREGS_OFFSET_BASE)
+ }
+ FEEDBACK_REENTER(handle_ill)
+ {
+ movei r30, 0 /* not an NMI */
+ j interrupt_return
+ }
+ STD_ENDPROC(handle_ill)
+
+ .pushsection .rodata, "a"
+ .align 8
+bpt_code:
+ bpt
+ ENDPROC(bpt_code)
+ .popsection
+
+/* Various stub interrupt handlers and syscall handlers */
+
+STD_ENTRY_LOCAL(_kernel_double_fault)
+ mfspr r1, EX_CONTEXT_1_0
+ move r2, lr
+ move r3, sp
+ move r4, r52
+ addi sp, sp, -C_ABI_SAVE_AREA_SIZE
+ j kernel_double_fault
+ STD_ENDPROC(_kernel_double_fault)
+
+STD_ENTRY_LOCAL(bad_intr)
+ mfspr r2, EX_CONTEXT_1_0
+ panic "Unhandled interrupt %#x: PC %#lx"
+ STD_ENDPROC(bad_intr)
+
+/* Put address of pt_regs in reg and jump. */
+#define PTREGS_SYSCALL(x, reg) \
+ STD_ENTRY(x); \
+ { \
+ PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
+ j _##x \
+ }; \
+ STD_ENDPROC(x)
+
+PTREGS_SYSCALL(sys_execve, r3)
+PTREGS_SYSCALL(sys_sigaltstack, r2)
+PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+
+/* Save additional callee-saves to pt_regs, put address in reg and jump. */
+#define PTREGS_SYSCALL_ALL_REGS(x, reg) \
+ STD_ENTRY(x); \
+ push_extra_callee_saves reg; \
+ j _##x; \
+ STD_ENDPROC(x)
+
+PTREGS_SYSCALL_ALL_REGS(sys_fork, r0)
+PTREGS_SYSCALL_ALL_REGS(sys_vfork, r0)
+PTREGS_SYSCALL_ALL_REGS(sys_clone, r4)
+PTREGS_SYSCALL_ALL_REGS(sys_cmpxchg_badaddr, r1)
+
+/*
+ * This entrypoint is taken for the cmpxchg and atomic_update fast
+ * swints. We may wish to generalize it to other fast swints at some
+ * point, but for now there are just two very similar ones, which
+ * makes it faster.
+ *
+ * The fast swint code is designed to have a small footprint. It does
+ * not save or restore any GPRs, counting on the caller-save registers
+ * to be available to it on entry. It does not modify any callee-save
+ * registers (including "lr"). It does not check what PL it is being
+ * called at, so you'd better not call it other than at PL0.
+ *
+ * It does not use the stack, but since it might be re-interrupted by
+ * a page fault which would assume the stack was valid, it does
+ * save/restore the stack pointer and zero it out to make sure it gets reset.
+ * Since we always keep interrupts disabled, the hypervisor won't
+ * clobber our EX_CONTEXT_1_x registers, so we don't save/restore them
+ * (other than to advance the PC on return).
+ *
+ * We have to manually validate the user vs kernel address range
+ * (since at PL1 we can read/write both), and for performance reasons
+ * we don't allow cmpxchg on the fc000000 memory region, since we only
+ * validate that the user address is below PAGE_OFFSET.
+ *
+ * We place it in the __HEAD section to ensure it is relatively
+ * near to the intvec_SWINT_1 code (reachable by a conditional branch).
+ *
+ * Must match register usage in do_page_fault().
+ */
+ __HEAD
+ .align 64
+ /* Align much later jump on the start of a cache line. */
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ nop; nop
+#endif
+ENTRY(sys_cmpxchg)
+
+ /*
+ * Save "sp" and set it zero for any possible page fault.
+ *
+ * HACK: We want to both zero sp and check r0's alignment,
+ * so we do both at once. If "sp" becomes nonzero we
+ * know r0 is unaligned and branch to the error handler that
+ * restores sp, so this is OK.
+ *
+ * ICS is disabled right now so having a garbage but nonzero
+ * sp is OK, since we won't execute any faulting instructions
+ * when it is nonzero.
+ */
+ {
+ move r27, sp
+ andi sp, r0, 3
+ }
+
+ /*
+ * Get the lock address in ATOMIC_LOCK_REG, and also validate that the
+ * address is less than PAGE_OFFSET, since that won't trap at PL1.
+ * We only use bits less than PAGE_SHIFT to avoid having to worry
+ * about aliasing among multiple mappings of the same physical page,
+ * and we ignore the low 3 bits so we have one lock that covers
+ * both a cmpxchg64() and a cmpxchg() on either its low or high word.
+ * NOTE: this code must match __atomic_hashed_lock() in lib/atomic.c.
+ */
+
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ {
+ /* Check for unaligned input. */
+ bnz sp, .Lcmpxchg_badaddr
+ mm r25, r0, zero, 3, PAGE_SHIFT-1
+ }
+ {
+ crc32_32 r25, zero, r25
+ moveli r21, lo16(atomic_lock_ptr)
+ }
+ {
+ auli r21, r21, ha16(atomic_lock_ptr)
+ auli r23, zero, hi16(PAGE_OFFSET) /* hugepage-aligned */
+ }
+ {
+ shri r20, r25, 32 - ATOMIC_HASH_L1_SHIFT
+ slt_u r23, r0, r23
+
+ /*
+ * Ensure that the TLB is loaded before we take out the lock.
+ * On TILEPro, this will start fetching the value all the way
+ * into our L1 as well (and if it gets modified before we
+ * grab the lock, it will be invalidated from our cache
+ * before we reload it). On tile64, we'll start fetching it
+ * into our L1 if we're the home, and if we're not, we'll
+ * still at least start fetching it into the home's L2.
+ */
+ lw r26, r0
+ }
+ {
+ s2a r21, r20, r21
+ bbns r23, .Lcmpxchg_badaddr
+ }
+ {
+ lw r21, r21
+ seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
+ andi r25, r25, ATOMIC_HASH_L2_SIZE - 1
+ }
+ {
+ /* Branch away at this point if we're doing a 64-bit cmpxchg. */
+ bbs r23, .Lcmpxchg64
+ andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */
+ }
+
+ {
+ /*
+ * We very carefully align the code that actually runs with
+ * the lock held (nine bundles) so that we know it is all in
+ * the icache when we start. This instruction (the jump) is
+ * at the start of the first cache line, address zero mod 64;
+ * we jump to somewhere in the second cache line to issue the
+ * tns, then jump back to finish up.
+ */
+ s2a ATOMIC_LOCK_REG_NAME, r25, r21
+ j .Lcmpxchg32_tns
+ }
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+ {
+ /* Check for unaligned input. */
+ bnz sp, .Lcmpxchg_badaddr
+ auli r23, zero, hi16(PAGE_OFFSET) /* hugepage-aligned */
+ }
+ {
+ /*
+ * Slide bits into position for 'mm'. We want to ignore
+ * the low 3 bits of r0, and consider only the next
+ * ATOMIC_HASH_SHIFT bits.
+ * Because of C pointer arithmetic, we want to compute this:
+ *
+ * ((char*)atomic_locks +
+ * (((r0 >> 3) & (1 << (ATOMIC_HASH_SIZE - 1))) << 2))
+ *
+ * Instead of two shifts we just ">> 1", and use 'mm'
+ * to ignore the low and high bits we don't want.
+ */
+ shri r25, r0, 1
+
+ slt_u r23, r0, r23
+
+ /*
+ * Ensure that the TLB is loaded before we take out the lock.
+ * On tilepro, this will start fetching the value all the way
+ * into our L1 as well (and if it gets modified before we
+ * grab the lock, it will be invalidated from our cache
+ * before we reload it). On tile64, we'll start fetching it
+ * into our L1 if we're the home, and if we're not, we'll
+ * still at least start fetching it into the home's L2.
+ */
+ lw r26, r0
+ }
+ {
+ /* atomic_locks is page aligned so this suffices to get its addr. */
+ auli r21, zero, hi16(atomic_locks)
+
+ bbns r23, .Lcmpxchg_badaddr
+ }
+ {
+ /*
+ * Insert the hash bits into the page-aligned pointer.
+ * ATOMIC_HASH_SHIFT is so big that we don't actually hash
+ * the unmasked address bits, as that may cause unnecessary
+ * collisions.
+ */
+ mm ATOMIC_LOCK_REG_NAME, r25, r21, 2, (ATOMIC_HASH_SHIFT + 2) - 1
+
+ seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_cmpxchg64
+ }
+ {
+ /* Branch away at this point if we're doing a 64-bit cmpxchg. */
+ bbs r23, .Lcmpxchg64
+ andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */
+ }
+ {
+ /*
+ * We very carefully align the code that actually runs with
+ * the lock held (nine bundles) so that we know it is all in
+ * the icache when we start. This instruction (the jump) is
+ * at the start of the first cache line, address zero mod 64;
+ * we jump to somewhere in the second cache line to issue the
+ * tns, then jump back to finish up.
+ */
+ j .Lcmpxchg32_tns
+ }
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+ ENTRY(__sys_cmpxchg_grab_lock)
+
+ /*
+ * Perform the actual cmpxchg or atomic_update.
+ * Note that __futex_mark_unlocked() in uClibc relies on
+ * atomic_update() to always perform an "mf", so don't make
+ * it optional or conditional without modifying that code.
+ */
+.Ldo_cmpxchg32:
+ {
+ lw r21, r0
+ seqi r23, TREG_SYSCALL_NR_NAME, __NR_FAST_atomic_update
+ move r24, r2
+ }
+ {
+ seq r22, r21, r1 /* See if cmpxchg matches. */
+ and r25, r21, r1 /* If atomic_update, compute (*mem & mask) */
+ }
+ {
+ or r22, r22, r23 /* Skip compare branch for atomic_update. */
+ add r25, r25, r2 /* Compute (*mem & mask) + addend. */
+ }
+ {
+ mvnz r24, r23, r25 /* Use atomic_update value if appropriate. */
+ bbns r22, .Lcmpxchg32_mismatch
+ }
+ sw r0, r24
+
+ /* Do slow mtspr here so the following "mf" waits less. */
+ {
+ move sp, r27
+ mtspr EX_CONTEXT_1_0, r28
+ }
+ mf
+
+ /* The following instruction is the start of the second cache line. */
+ {
+ move r0, r21
+ sw ATOMIC_LOCK_REG_NAME, zero
+ }
+ iret
+
+ /* Duplicated code here in the case where we don't overlap "mf" */
+.Lcmpxchg32_mismatch:
+ {
+ move r0, r21
+ sw ATOMIC_LOCK_REG_NAME, zero
+ }
+ {
+ move sp, r27
+ mtspr EX_CONTEXT_1_0, r28
+ }
+ iret
+
+ /*
+ * The locking code is the same for 32-bit cmpxchg/atomic_update,
+ * and for 64-bit cmpxchg. We provide it as a macro and put
+ * it into both versions. We can't share the code literally
+ * since it depends on having the right branch-back address.
+ * Note that the first few instructions should share the cache
+ * line with the second half of the actual locked code.
+ */
+ .macro cmpxchg_lock, bitwidth
+
+ /* Lock; if we succeed, jump back up to the read-modify-write. */
+#ifdef CONFIG_SMP
+ tns r21, ATOMIC_LOCK_REG_NAME
+#else
+ /*
+ * Non-SMP preserves all the lock infrastructure, to keep the
+ * code simpler for the interesting (SMP) case. However, we do
+ * one small optimization here and in atomic_asm.S, which is
+ * to fake out acquiring the actual lock in the atomic_lock table.
+ */
+ movei r21, 0
+#endif
+
+ /* Issue the slow SPR here while the tns result is in flight. */
+ mfspr r28, EX_CONTEXT_1_0
+
+ {
+ addi r28, r28, 8 /* return to the instruction after the swint1 */
+ bzt r21, .Ldo_cmpxchg\bitwidth
+ }
+ /*
+ * The preceding instruction is the last thing that must be
+ * on the second cache line.
+ */
+
+#ifdef CONFIG_SMP
+ /*
+ * We failed to acquire the tns lock on our first try. Now use
+ * bounded exponential backoff to retry, like __atomic_spinlock().
+ */
+ {
+ moveli r23, 2048 /* maximum backoff time in cycles */
+ moveli r25, 32 /* starting backoff time in cycles */
+ }
+1: mfspr r26, CYCLE_LOW /* get start point for this backoff */
+2: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */
+ sub r22, r22, r26
+ slt r22, r22, r25
+ bbst r22, 2b
+ {
+ shli r25, r25, 1 /* double the backoff; retry the tns */
+ tns r21, ATOMIC_LOCK_REG_NAME
+ }
+ slt r26, r23, r25 /* is the proposed backoff too big? */
+ {
+ mvnz r25, r26, r23
+ bzt r21, .Ldo_cmpxchg\bitwidth
+ }
+ j 1b
+#endif /* CONFIG_SMP */
+ .endm
+
+.Lcmpxchg32_tns:
+ cmpxchg_lock 32
+
+ /*
+ * This code is invoked from sys_cmpxchg after most of the
+ * preconditions have been checked. We still need to check
+ * that r0 is 8-byte aligned, since if it's not we won't
+ * actually be atomic. However, ATOMIC_LOCK_REG has the atomic
+ * lock pointer and r27/r28 have the saved SP/PC.
+ * r23 is holding "r0 & 7" so we can test for alignment.
+ * The compare value is in r2/r3; the new value is in r4/r5.
+ * On return, we must put the old value in r0/r1.
+ */
+ .align 64
+.Lcmpxchg64:
+ {
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ s2a ATOMIC_LOCK_REG_NAME, r25, r21
+#endif
+ bzt r23, .Lcmpxchg64_tns
+ }
+ j .Lcmpxchg_badaddr
+
+.Ldo_cmpxchg64:
+ {
+ lw r21, r0
+ addi r25, r0, 4
+ }
+ {
+ lw r1, r25
+ }
+ seq r26, r21, r2
+ {
+ bz r26, .Lcmpxchg64_mismatch
+ seq r26, r1, r3
+ }
+ {
+ bz r26, .Lcmpxchg64_mismatch
+ }
+ sw r0, r4
+ sw r25, r5
+
+ /*
+ * The 32-bit path provides optimized "match" and "mismatch"
+ * iret paths, but we don't have enough bundles in this cache line
+ * to do that, so we just make even the "mismatch" path do an "mf".
+ */
+.Lcmpxchg64_mismatch:
+ {
+ move sp, r27
+ mtspr EX_CONTEXT_1_0, r28
+ }
+ mf
+ {
+ move r0, r21
+ sw ATOMIC_LOCK_REG_NAME, zero
+ }
+ iret
+
+.Lcmpxchg64_tns:
+ cmpxchg_lock 64
+
+
+ /*
+ * Reset sp and revector to sys_cmpxchg_badaddr(), which will
+ * just raise the appropriate signal and exit. Doing it this
+ * way means we don't have to duplicate the code in intvec.S's
+ * int_hand macro that locates the top of the stack.
+ */
+.Lcmpxchg_badaddr:
+ {
+ moveli TREG_SYSCALL_NR_NAME, __NR_cmpxchg_badaddr
+ move sp, r27
+ }
+ j intvec_SWINT_1
+ ENDPROC(sys_cmpxchg)
+ ENTRY(__sys_cmpxchg_end)
+
+
+/* The single-step support may need to read all the registers. */
+int_unalign:
+ push_extra_callee_saves r0
+ j do_trap
+
+/* Include .intrpt1 array of interrupt vectors */
+ .section ".intrpt1", "ax"
+
+#define op_handle_perf_interrupt bad_intr
+#define op_handle_aux_perf_interrupt bad_intr
+
+#define do_hardwall_trap bad_intr
+
+ int_hand INT_ITLB_MISS, ITLB_MISS, \
+ do_page_fault, handle_interrupt_no_single_step
+ int_hand INT_MEM_ERROR, MEM_ERROR, bad_intr
+ int_hand INT_ILL, ILL, do_trap, handle_ill
+ int_hand INT_GPV, GPV, do_trap
+ int_hand INT_SN_ACCESS, SN_ACCESS, do_trap
+ int_hand INT_IDN_ACCESS, IDN_ACCESS, do_trap
+ int_hand INT_UDN_ACCESS, UDN_ACCESS, do_trap
+ int_hand INT_IDN_REFILL, IDN_REFILL, bad_intr
+ int_hand INT_UDN_REFILL, UDN_REFILL, bad_intr
+ int_hand INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr
+ int_hand INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr
+ int_hand INT_SWINT_3, SWINT_3, do_trap
+ int_hand INT_SWINT_2, SWINT_2, do_trap
+ int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall
+ int_hand INT_SWINT_0, SWINT_0, do_trap
+ int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign
+ int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault
+ int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault
+ int_hand INT_DMATLB_MISS, DMATLB_MISS, do_page_fault
+ int_hand INT_DMATLB_ACCESS, DMATLB_ACCESS, do_page_fault
+ int_hand INT_SNITLB_MISS, SNITLB_MISS, do_page_fault
+ int_hand INT_SN_NOTIFY, SN_NOTIFY, bad_intr
+ int_hand INT_SN_FIREWALL, SN_FIREWALL, do_hardwall_trap
+ int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr
+ int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap
+ int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt
+ int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr
+ int_hand INT_UDN_TIMER, UDN_TIMER, bad_intr
+ int_hand INT_DMA_NOTIFY, DMA_NOTIFY, bad_intr
+ int_hand INT_IDN_CA, IDN_CA, bad_intr
+ int_hand INT_UDN_CA, UDN_CA, bad_intr
+ int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr
+ int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr
+ int_hand INT_PERF_COUNT, PERF_COUNT, \
+ op_handle_perf_interrupt, handle_nmi
+ int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr
+ int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr
+ dc_dispatch INT_INTCTRL_1, INTCTRL_1
+ int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr
+ int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \
+ hv_message_intr, handle_interrupt_downcall
+ int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, \
+ tile_dev_intr, handle_interrupt_downcall
+ int_hand INT_I_ASID, I_ASID, bad_intr
+ int_hand INT_D_ASID, D_ASID, bad_intr
+ int_hand INT_DMATLB_MISS_DWNCL, DMATLB_MISS_DWNCL, \
+ do_page_fault, handle_interrupt_downcall
+ int_hand INT_SNITLB_MISS_DWNCL, SNITLB_MISS_DWNCL, \
+ do_page_fault, handle_interrupt_downcall
+ int_hand INT_DMATLB_ACCESS_DWNCL, DMATLB_ACCESS_DWNCL, \
+ do_page_fault, handle_interrupt_downcall
+ int_hand INT_SN_CPL, SN_CPL, bad_intr
+ int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap
+#if CHIP_HAS_AUX_PERF_COUNTERS()
+ int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \
+ op_handle_aux_perf_interrupt, handle_nmi
+#endif
+
+ /* Synthetic interrupt delivered only by the simulator */
+ int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint
diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c
new file mode 100644
index 000000000000..24cc6b2abc2c
--- /dev/null
+++ b/arch/tile/kernel/irq.c
@@ -0,0 +1,227 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/uaccess.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+/*
+ * The set of interrupts we enable for raw_local_irq_enable().
+ * This is initialized to have just a single interrupt that the kernel
+ * doesn't actually use as a sentinel. During kernel init,
+ * interrupts are added as the kernel gets prepared to support them.
+ * NOTE: we could probably initialize them all statically up front.
+ */
+DEFINE_PER_CPU(unsigned long long, interrupts_enabled_mask) =
+ INITIAL_INTERRUPTS_ENABLED;
+EXPORT_PER_CPU_SYMBOL(interrupts_enabled_mask);
+
+/* Define per-tile device interrupt state */
+DEFINE_PER_CPU(HV_IntrState, dev_intr_state);
+
+DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_internodealigned_in_smp;
+EXPORT_PER_CPU_SYMBOL(irq_stat);
+
+
+
+/*
+ * Interrupt dispatcher, invoked upon a hypervisor device interrupt downcall
+ */
+void tile_dev_intr(struct pt_regs *regs, int intnum)
+{
+ int irq;
+
+ /*
+ * Get the device interrupt pending mask from where the hypervisor
+ * has tucked it away for us.
+ */
+ unsigned long pending_dev_intr_mask = __insn_mfspr(SPR_SYSTEM_SAVE_1_3);
+
+
+ /* Track time spent here in an interrupt context. */
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ /* Debugging check for stack overflow: less than 1/8th stack free? */
+ {
+ long sp = stack_pointer - (long) current_thread_info();
+ if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+ printk(KERN_EMERG "tile_dev_intr: "
+ "stack overflow: %ld\n",
+ sp - sizeof(struct thread_info));
+ dump_stack();
+ }
+ }
+#endif
+
+ for (irq = 0; pending_dev_intr_mask; ++irq) {
+ if (pending_dev_intr_mask & 0x1) {
+ generic_handle_irq(irq);
+
+ /* Count device irqs; IPIs are counted elsewhere. */
+ if (irq > HV_MAX_IPI_INTERRUPT)
+ __get_cpu_var(irq_stat).irq_dev_intr_count++;
+ }
+ pending_dev_intr_mask >>= 1;
+ }
+
+ /*
+ * Track time spent against the current process again and
+ * process any softirqs if they are waiting.
+ */
+ irq_exit();
+ set_irq_regs(old_regs);
+}
+
+
+/* Mask an interrupt. */
+static void hv_dev_irq_mask(unsigned int irq)
+{
+ HV_IntrState *p_intr_state = &__get_cpu_var(dev_intr_state);
+ hv_disable_intr(p_intr_state, 1 << irq);
+}
+
+/* Unmask an interrupt. */
+static void hv_dev_irq_unmask(unsigned int irq)
+{
+ /* Re-enable the hypervisor to generate interrupts. */
+ HV_IntrState *p_intr_state = &__get_cpu_var(dev_intr_state);
+ hv_enable_intr(p_intr_state, 1 << irq);
+}
+
+/*
+ * The HV doesn't latch incoming interrupts while an interrupt is
+ * disabled, so we need to reenable interrupts before running the
+ * handler.
+ *
+ * ISSUE: Enabling the interrupt this early avoids any race conditions
+ * but introduces the possibility of nested interrupt stack overflow.
+ * An imminent change to the HV IRQ model will fix this.
+ */
+static void hv_dev_irq_ack(unsigned int irq)
+{
+ hv_dev_irq_unmask(irq);
+}
+
+/*
+ * Since ack() reenables interrupts, there's nothing to do at eoi().
+ */
+static void hv_dev_irq_eoi(unsigned int irq)
+{
+}
+
+static struct irq_chip hv_dev_irq_chip = {
+ .typename = "hv_dev_irq_chip",
+ .ack = hv_dev_irq_ack,
+ .mask = hv_dev_irq_mask,
+ .unmask = hv_dev_irq_unmask,
+ .eoi = hv_dev_irq_eoi,
+};
+
+static struct irqaction resched_action = {
+ .handler = handle_reschedule_ipi,
+ .name = "resched",
+ .dev_id = handle_reschedule_ipi /* unique token */,
+};
+
+void __init init_IRQ(void)
+{
+ /* Bind IPI irqs. Does this belong somewhere else in init? */
+ tile_irq_activate(IRQ_RESCHEDULE);
+ BUG_ON(setup_irq(IRQ_RESCHEDULE, &resched_action));
+}
+
+void __cpuinit init_per_tile_IRQs(void)
+{
+ int rc;
+
+ /* Set the pointer to the per-tile device interrupt state. */
+ HV_IntrState *sv_ptr = &__get_cpu_var(dev_intr_state);
+ rc = hv_dev_register_intr_state(sv_ptr);
+ if (rc != HV_OK)
+ panic("hv_dev_register_intr_state: error %d", rc);
+
+}
+
+void tile_irq_activate(unsigned int irq)
+{
+ /*
+ * Paravirtualized drivers can call up to the HV to find out
+ * which irq they're associated with. The HV interface
+ * doesn't provide a generic call for discovering all valid
+ * IRQs, so drivers must call this method to initialize newly
+ * discovered IRQs.
+ *
+ * We could also just initialize all 32 IRQs at startup, but
+ * doing so would lead to a kernel fault if an unexpected
+ * interrupt fires and jumps to a NULL action. By defering
+ * the set_irq_chip_and_handler() call, unexpected IRQs are
+ * handled properly by handle_bad_irq().
+ */
+ hv_dev_irq_mask(irq);
+ set_irq_chip_and_handler(irq, &hv_dev_irq_chip, handle_percpu_irq);
+}
+
+void ack_bad_irq(unsigned int irq)
+{
+ printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+}
+
+/*
+ * Generic, controller-independent functions:
+ */
+
+int show_interrupts(struct seq_file *p, void *v)
+{
+ int i = *(loff_t *) v, j;
+ struct irqaction *action;
+ unsigned long flags;
+
+ if (i == 0) {
+ seq_printf(p, " ");
+ for (j = 0; j < NR_CPUS; j++)
+ if (cpu_online(j))
+ seq_printf(p, "CPU%-8d", j);
+ seq_putc(p, '\n');
+ }
+
+ if (i < NR_IRQS) {
+ raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
+ action = irq_desc[i].action;
+ if (!action)
+ goto skip;
+ seq_printf(p, "%3d: ", i);
+#ifndef CONFIG_SMP
+ seq_printf(p, "%10u ", kstat_irqs(i));
+#else
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
+#endif
+ seq_printf(p, " %14s", irq_desc[i].chip->typename);
+ seq_printf(p, " %s", action->name);
+
+ for (action = action->next; action; action = action->next)
+ seq_printf(p, ", %s", action->name);
+
+ seq_putc(p, '\n');
+skip:
+ raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+ }
+ return 0;
+}
diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c
new file mode 100644
index 000000000000..ed3e1cb8dcc4
--- /dev/null
+++ b/arch/tile/kernel/machine_kexec.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * based on machine_kexec.c from other architectures in linux-2.6.18
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <linux/errno.h>
+#include <linux/vmalloc.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/elf.h>
+#include <linux/highmem.h>
+#include <linux/mmu_context.h>
+#include <linux/io.h>
+#include <linux/timex.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/cacheflush.h>
+#include <asm/checksum.h>
+#include <hv/hypervisor.h>
+
+
+/*
+ * This stuff is not in elf.h and is not in any other kernel include.
+ * This stuff is needed below in the little boot notes parser to
+ * extract the command line so we can pass it to the hypervisor.
+ */
+struct Elf32_Bhdr {
+ Elf32_Word b_signature;
+ Elf32_Word b_size;
+ Elf32_Half b_checksum;
+ Elf32_Half b_records;
+};
+#define ELF_BOOT_MAGIC 0x0E1FB007
+#define EBN_COMMAND_LINE 0x00000004
+#define roundupsz(X) (((X) + 3) & ~3)
+
+/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
+
+
+void machine_shutdown(void)
+{
+ /*
+ * Normally we would stop all the other processors here, but
+ * the check in machine_kexec_prepare below ensures we'll only
+ * get this far if we've been booted with "nosmp" on the
+ * command line or without CONFIG_SMP so there's nothing to do
+ * here (for now).
+ */
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+ /*
+ * Cannot happen. This type of kexec is disabled on this
+ * architecture (and enforced in machine_kexec_prepare below).
+ */
+}
+
+
+int machine_kexec_prepare(struct kimage *image)
+{
+ if (num_online_cpus() > 1) {
+ printk(KERN_WARNING "%s: detected attempt to kexec "
+ "with num_online_cpus() > 1\n",
+ __func__);
+ return -ENOSYS;
+ }
+ if (image->type != KEXEC_TYPE_DEFAULT) {
+ printk(KERN_WARNING "%s: detected attempt to kexec "
+ "with unsupported type: %d\n",
+ __func__,
+ image->type);
+ return -ENOSYS;
+ }
+ return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+ /*
+ * We did nothing in machine_kexec_prepare,
+ * so we have nothing to do here.
+ */
+}
+
+/*
+ * If we can find elf boot notes on this page, return the command
+ * line. Otherwise, silently return null. Somewhat kludgy, but no
+ * good way to do this without significantly rearchitecting the
+ * architecture-independent kexec code.
+ */
+
+static unsigned char *kexec_bn2cl(void *pg)
+{
+ struct Elf32_Bhdr *bhdrp;
+ Elf32_Nhdr *nhdrp;
+ unsigned char *desc;
+ unsigned char *command_line;
+ __sum16 csum;
+
+ bhdrp = (struct Elf32_Bhdr *) pg;
+
+ /*
+ * This routine is invoked for every source page, so make
+ * sure to quietly ignore every impossible page.
+ */
+ if (bhdrp->b_signature != ELF_BOOT_MAGIC ||
+ bhdrp->b_size > PAGE_SIZE)
+ return 0;
+
+ /*
+ * If we get a checksum mismatch, it's possible that this is
+ * just a false positive, but relatively unlikely. We dump
+ * out the contents of the section so we can diagnose better.
+ */
+ csum = ip_compute_csum(pg, bhdrp->b_size);
+ if (csum != 0) {
+ int i;
+ unsigned char *p = pg;
+ int nbytes = min((Elf32_Word)1000, bhdrp->b_size);
+ printk(KERN_INFO "%s: bad checksum %#x\n", __func__, csum);
+ printk(KERN_INFO "bytes (%d):", bhdrp->b_size);
+ for (i = 0; i < nbytes; ++i)
+ printk(" %02x", p[i]);
+ if (bhdrp->b_size != nbytes)
+ printk(" ...");
+ printk("\n");
+ return 0;
+ }
+
+ nhdrp = (Elf32_Nhdr *) (bhdrp + 1);
+
+ while (nhdrp->n_type != EBN_COMMAND_LINE) {
+
+ desc = (unsigned char *) (nhdrp + 1);
+ desc += roundupsz(nhdrp->n_descsz);
+
+ nhdrp = (Elf32_Nhdr *) desc;
+
+ /* still in bounds? */
+ if ((unsigned char *) (nhdrp + 1) >
+ ((unsigned char *) pg) + bhdrp->b_size) {
+
+ printk(KERN_INFO "%s: out of bounds\n", __func__);
+ return 0;
+ }
+ }
+
+ command_line = (unsigned char *) (nhdrp + 1);
+ desc = command_line;
+
+ while (*desc != '\0') {
+ desc++;
+ if (((unsigned long)desc & PAGE_MASK) != (unsigned long)pg) {
+ printk(KERN_INFO "%s: ran off end of page\n",
+ __func__);
+ return 0;
+ }
+ }
+
+ return command_line;
+}
+
+static void kexec_find_and_set_command_line(struct kimage *image)
+{
+ kimage_entry_t *ptr, entry;
+
+ unsigned char *command_line = 0;
+ unsigned char *r;
+ HV_Errno hverr;
+
+ for (ptr = &image->head;
+ (entry = *ptr) && !(entry & IND_DONE);
+ ptr = (entry & IND_INDIRECTION) ?
+ phys_to_virt((entry & PAGE_MASK)) : ptr + 1) {
+
+ if ((entry & IND_SOURCE)) {
+ void *va =
+ kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0);
+ r = kexec_bn2cl(va);
+ if (r) {
+ command_line = r;
+ break;
+ }
+ kunmap_atomic(va, KM_USER0);
+ }
+ }
+
+ if (command_line != 0) {
+ printk(KERN_INFO "setting new command line to \"%s\"\n",
+ command_line);
+
+ hverr = hv_set_command_line(
+ (HV_VirtAddr) command_line, strlen(command_line));
+ kunmap_atomic(command_line, KM_USER0);
+ } else {
+ printk(KERN_INFO "%s: no command line found; making empty\n",
+ __func__);
+ hverr = hv_set_command_line((HV_VirtAddr) command_line, 0);
+ }
+ if (hverr) {
+ printk(KERN_WARNING
+ "%s: call to hv_set_command_line returned error: %d\n",
+ __func__, hverr);
+
+ }
+}
+
+/*
+ * The kexec code range-checks all its PAs, so to avoid having it run
+ * amok and allocate memory and then sequester it from every other
+ * controller, we force it to come from controller zero. We also
+ * disable the oom-killer since if we do end up running out of memory,
+ * that almost certainly won't help.
+ */
+struct page *kimage_alloc_pages_arch(gfp_t gfp_mask, unsigned int order)
+{
+ gfp_mask |= __GFP_THISNODE | __GFP_NORETRY;
+ return alloc_pages_node(0, gfp_mask, order);
+}
+
+static void setup_quasi_va_is_pa(void)
+{
+ HV_PTE *pgtable;
+ HV_PTE pte;
+ int i;
+
+ /*
+ * Flush our TLB to prevent conflicts between the previous contents
+ * and the new stuff we're about to add.
+ */
+ local_flush_tlb_all();
+
+ /* setup VA is PA, at least up to PAGE_OFFSET */
+
+ pgtable = (HV_PTE *)current->mm->pgd;
+ pte = hv_pte(_PAGE_KERNEL | _PAGE_HUGE_PAGE);
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+
+ for (i = 0; i < pgd_index(PAGE_OFFSET); i++)
+ pgtable[i] = pfn_pte(i << (HPAGE_SHIFT - PAGE_SHIFT), pte);
+}
+
+
+NORET_TYPE void machine_kexec(struct kimage *image)
+{
+ void *reboot_code_buffer;
+ NORET_TYPE void (*rnk)(unsigned long, void *, unsigned long)
+ ATTRIB_NORET;
+
+ /* Mask all interrupts before starting to reboot. */
+ interrupt_mask_set_mask(~0ULL);
+
+ kexec_find_and_set_command_line(image);
+
+ /*
+ * Adjust the home caching of the control page to be cached on
+ * this cpu, and copy the assembly helper into the control
+ * code page, which we map in the vmalloc area.
+ */
+ homecache_change_page_home(image->control_code_page, 0,
+ smp_processor_id());
+ reboot_code_buffer = vmap(&image->control_code_page, 1, 0,
+ __pgprot(_PAGE_KERNEL | _PAGE_EXECUTABLE));
+ memcpy(reboot_code_buffer, relocate_new_kernel,
+ relocate_new_kernel_size);
+ __flush_icache_range(
+ (unsigned long) reboot_code_buffer,
+ (unsigned long) reboot_code_buffer + relocate_new_kernel_size);
+
+ setup_quasi_va_is_pa();
+
+ /* now call it */
+ rnk = reboot_code_buffer;
+ (*rnk)(image->head, reboot_code_buffer, image->start);
+}
diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c
new file mode 100644
index 000000000000..f991f5285d8a
--- /dev/null
+++ b/arch/tile/kernel/messaging.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/percpu.h>
+#include <linux/smp.h>
+#include <linux/hardirq.h>
+#include <linux/ptrace.h>
+#include <asm/hv_driver.h>
+#include <asm/irq_regs.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+
+/* All messages are stored here */
+static DEFINE_PER_CPU(HV_MsgState, msg_state);
+
+void __cpuinit init_messaging()
+{
+ /* Allocate storage for messages in kernel space */
+ HV_MsgState *state = &__get_cpu_var(msg_state);
+ int rc = hv_register_message_state(state);
+ if (rc != HV_OK)
+ panic("hv_register_message_state: error %d", rc);
+
+ /* Make sure downcall interrupts will be enabled. */
+ raw_local_irq_unmask(INT_INTCTRL_1);
+}
+
+void hv_message_intr(struct pt_regs *regs, int intnum)
+{
+ /*
+ * We enter with interrupts disabled and leave them disabled,
+ * to match expectations of called functions (e.g.
+ * do_ccupdate_local() in mm/slab.c). This is also consistent
+ * with normal call entry for device interrupts.
+ */
+
+ int message[HV_MAX_MESSAGE_SIZE/sizeof(int)];
+ HV_RcvMsgInfo rmi;
+ int nmsgs = 0;
+
+ /* Track time spent here in an interrupt context */
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ irq_enter();
+
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
+ /* Debugging check for stack overflow: less than 1/8th stack free? */
+ {
+ long sp = stack_pointer - (long) current_thread_info();
+ if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) {
+ printk(KERN_EMERG "hv_message_intr: "
+ "stack overflow: %ld\n",
+ sp - sizeof(struct thread_info));
+ dump_stack();
+ }
+ }
+#endif
+
+ while (1) {
+ rmi = hv_receive_message(__get_cpu_var(msg_state),
+ (HV_VirtAddr) message,
+ sizeof(message));
+ if (rmi.msglen == 0)
+ break;
+
+ if (rmi.msglen < 0)
+ panic("hv_receive_message failed: %d", rmi.msglen);
+
+ ++nmsgs;
+
+ if (rmi.source == HV_MSG_TILE) {
+ int tag;
+
+ /* we just send tags for now */
+ BUG_ON(rmi.msglen != sizeof(int));
+
+ tag = message[0];
+#ifdef CONFIG_SMP
+ evaluate_message(message[0]);
+#else
+ panic("Received IPI message %d in UP mode", tag);
+#endif
+ } else if (rmi.source == HV_MSG_INTR) {
+ HV_IntrMsg *him = (HV_IntrMsg *)message;
+ struct hv_driver_cb *cb =
+ (struct hv_driver_cb *)him->intarg;
+ cb->callback(cb, him->intdata);
+ __get_cpu_var(irq_stat).irq_hv_msg_count++;
+ }
+ }
+
+ /*
+ * We shouldn't have gotten a message downcall with no
+ * messages available.
+ */
+ if (nmsgs == 0)
+ panic("Message downcall invoked with no messages!");
+
+ /*
+ * Track time spent against the current process again and
+ * process any softirqs if they are waiting.
+ */
+ irq_exit();
+ set_irq_regs(old_regs);
+}
diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c
new file mode 100644
index 000000000000..ed3e91161f88
--- /dev/null
+++ b/arch/tile/kernel/module.c
@@ -0,0 +1,257 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Based on i386 version, copyright (C) 2001 Rusty Russell.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <asm/opcode-tile.h>
+#include <asm/pgtable.h>
+
+#ifdef __tilegx__
+# define Elf_Rela Elf64_Rela
+# define ELF_R_SYM ELF64_R_SYM
+# define ELF_R_TYPE ELF64_R_TYPE
+#else
+# define Elf_Rela Elf32_Rela
+# define ELF_R_SYM ELF32_R_SYM
+# define ELF_R_TYPE ELF32_R_TYPE
+#endif
+
+#ifdef MODULE_DEBUG
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt...)
+#endif
+
+/*
+ * Allocate some address space in the range MEM_MODULE_START to
+ * MEM_MODULE_END and populate it with memory.
+ */
+void *module_alloc(unsigned long size)
+{
+ struct page **pages;
+ pgprot_t prot_rwx = __pgprot(_PAGE_KERNEL | _PAGE_KERNEL_EXEC);
+ struct vm_struct *area;
+ int i = 0;
+ int npages;
+
+ if (size == 0)
+ return NULL;
+ npages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ pages = kmalloc(npages * sizeof(struct page *), GFP_KERNEL);
+ if (pages == NULL)
+ return NULL;
+ for (; i < npages; ++i) {
+ pages[i] = alloc_page(GFP_KERNEL | __GFP_HIGHMEM);
+ if (!pages[i])
+ goto error;
+ }
+
+ area = __get_vm_area(size, VM_ALLOC, MEM_MODULE_START, MEM_MODULE_END);
+ if (!area)
+ goto error;
+
+ if (map_vm_area(area, prot_rwx, &pages)) {
+ vunmap(area->addr);
+ goto error;
+ }
+
+ return area->addr;
+
+error:
+ while (--i >= 0)
+ __free_page(pages[i]);
+ kfree(pages);
+ return NULL;
+}
+
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ vfree(module_region);
+ /*
+ * FIXME: If module_region == mod->init_region, trim exception
+ * table entries.
+ */
+}
+
+/* We don't need anything special. */
+int module_frob_arch_sections(Elf_Ehdr *hdr,
+ Elf_Shdr *sechdrs,
+ char *secstrings,
+ struct module *mod)
+{
+ return 0;
+}
+
+int apply_relocate(Elf_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ printk(KERN_ERR "module %s: .rel relocation unsupported\n", me->name);
+ return -ENOEXEC;
+}
+
+#ifdef __tilegx__
+/*
+ * Validate that the high 16 bits of "value" is just the sign-extension of
+ * the low 48 bits.
+ */
+static int validate_hw2_last(long value, struct module *me)
+{
+ if (((value << 16) >> 16) != value) {
+ printk("module %s: Out of range HW2_LAST value %#lx\n",
+ me->name, value);
+ return 0;
+ }
+ return 1;
+}
+
+/*
+ * Validate that "value" isn't too big to hold in a JumpOff relocation.
+ */
+static int validate_jumpoff(long value)
+{
+ /* Determine size of jump offset. */
+ int shift = __builtin_clzl(get_JumpOff_X1(create_JumpOff_X1(-1)));
+
+ /* Check to see if it fits into the relocation slot. */
+ long f = get_JumpOff_X1(create_JumpOff_X1(value));
+ f = (f << shift) >> shift;
+
+ return f == value;
+}
+#endif
+
+int apply_relocate_add(Elf_Shdr *sechdrs,
+ const char *strtab,
+ unsigned int symindex,
+ unsigned int relsec,
+ struct module *me)
+{
+ unsigned int i;
+ Elf_Rela *rel = (void *)sechdrs[relsec].sh_addr;
+ Elf_Sym *sym;
+ u64 *location;
+ unsigned long value;
+
+ DEBUGP("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
+ /* This is where to make the change */
+ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rel[i].r_offset;
+ /*
+ * This is the symbol it is referring to.
+ * Note that all undefined symbols have been resolved.
+ */
+ sym = (Elf_Sym *)sechdrs[symindex].sh_addr
+ + ELF_R_SYM(rel[i].r_info);
+ value = sym->st_value + rel[i].r_addend;
+
+ switch (ELF_R_TYPE(rel[i].r_info)) {
+
+#define MUNGE(func) (*location = ((*location & ~func(-1)) | func(value)))
+
+#ifndef __tilegx__
+ case R_TILE_32:
+ *(uint32_t *)location = value;
+ break;
+ case R_TILE_IMM16_X0_HA:
+ value = (value + 0x8000) >> 16;
+ /*FALLTHROUGH*/
+ case R_TILE_IMM16_X0_LO:
+ MUNGE(create_Imm16_X0);
+ break;
+ case R_TILE_IMM16_X1_HA:
+ value = (value + 0x8000) >> 16;
+ /*FALLTHROUGH*/
+ case R_TILE_IMM16_X1_LO:
+ MUNGE(create_Imm16_X1);
+ break;
+ case R_TILE_JOFFLONG_X1:
+ value -= (unsigned long) location; /* pc-relative */
+ value = (long) value >> 3; /* count by instrs */
+ MUNGE(create_JOffLong_X1);
+ break;
+#else
+ case R_TILEGX_64:
+ *location = value;
+ break;
+ case R_TILEGX_IMM16_X0_HW2_LAST:
+ if (!validate_hw2_last(value, me))
+ return -ENOEXEC;
+ value >>= 16;
+ /*FALLTHROUGH*/
+ case R_TILEGX_IMM16_X0_HW1:
+ value >>= 16;
+ /*FALLTHROUGH*/
+ case R_TILEGX_IMM16_X0_HW0:
+ MUNGE(create_Imm16_X0);
+ break;
+ case R_TILEGX_IMM16_X1_HW2_LAST:
+ if (!validate_hw2_last(value, me))
+ return -ENOEXEC;
+ value >>= 16;
+ /*FALLTHROUGH*/
+ case R_TILEGX_IMM16_X1_HW1:
+ value >>= 16;
+ /*FALLTHROUGH*/
+ case R_TILEGX_IMM16_X1_HW0:
+ MUNGE(create_Imm16_X1);
+ break;
+ case R_TILEGX_JUMPOFF_X1:
+ value -= (unsigned long) location; /* pc-relative */
+ value = (long) value >> 3; /* count by instrs */
+ if (!validate_jumpoff(value)) {
+ printk("module %s: Out of range jump to"
+ " %#llx at %#llx (%p)\n", me->name,
+ sym->st_value + rel[i].r_addend,
+ rel[i].r_offset, location);
+ return -ENOEXEC;
+ }
+ MUNGE(create_JumpOff_X1);
+ break;
+#endif
+
+#undef MUNGE
+
+ default:
+ printk(KERN_ERR "module %s: Unknown relocation: %d\n",
+ me->name, (int) ELF_R_TYPE(rel[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+ return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ /* FIXME: perhaps remove the "writable" bit from the TLB? */
+ return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+}
diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c
new file mode 100644
index 000000000000..1d456404f065
--- /dev/null
+++ b/arch/tile/kernel/pci-dma.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/vmalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+/* Generic DMA mapping functions: */
+
+/*
+ * Allocate what Linux calls "coherent" memory, which for us just
+ * means uncached.
+ */
+void *dma_alloc_coherent(struct device *dev,
+ size_t size,
+ dma_addr_t *dma_handle,
+ gfp_t gfp)
+{
+ u64 dma_mask = dev->coherent_dma_mask ?: DMA_BIT_MASK(32);
+ int node = dev_to_node(dev);
+ int order = get_order(size);
+ struct page *pg;
+ dma_addr_t addr;
+
+ /* Set GFP_KERNEL to ensure we have memory with a kernel VA. */
+ gfp |= GFP_KERNEL | __GFP_ZERO;
+
+ /*
+ * By forcing NUMA node 0 for 32-bit masks we ensure that the
+ * high 32 bits of the resulting PA will be zero. If the mask
+ * size is, e.g., 24, we may still not be able to guarantee a
+ * suitable memory address, in which case we will return NULL.
+ * But such devices are uncommon.
+ */
+ if (dma_mask <= DMA_BIT_MASK(32))
+ node = 0;
+
+ pg = homecache_alloc_pages_node(node, gfp, order, PAGE_HOME_UNCACHED);
+ if (pg == NULL)
+ return NULL;
+
+ addr = page_to_phys(pg);
+ if (addr + size > dma_mask) {
+ homecache_free_pages(addr, order);
+ return NULL;
+ }
+
+ *dma_handle = addr;
+ return page_address(pg);
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+/*
+ * Free memory that was allocated with dma_alloc_coherent.
+ */
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle)
+{
+ homecache_free_pages((unsigned long)vaddr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+/*
+ * The map routines "map" the specified address range for DMA
+ * accesses. The memory belongs to the device after this call is
+ * issued, until it is unmapped with dma_unmap_single.
+ *
+ * We don't need to do any mapping, we just flush the address range
+ * out of the cache and return a DMA address.
+ *
+ * The unmap routines do whatever is necessary before the processor
+ * accesses the memory again, and must be called before the driver
+ * touches the memory. We can get away with a cache invalidate if we
+ * can count on nothing having been touched.
+ */
+
+
+/*
+ * dma_map_single can be passed any memory address, and there appear
+ * to be no alignment constraints.
+ *
+ * There is a chance that the start of the buffer will share a cache
+ * line with some other data that has been touched in the meantime.
+ */
+dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction direction)
+{
+ struct page *page;
+ dma_addr_t dma_addr;
+ int thispage;
+
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(size == 0);
+
+ dma_addr = __pa(ptr);
+
+ /* We might have been handed a buffer that wraps a page boundary */
+ while ((int)size > 0) {
+ /* The amount to flush that's on this page */
+ thispage = PAGE_SIZE - ((unsigned long)ptr & (PAGE_SIZE - 1));
+ thispage = min((int)thispage, (int)size);
+ /* Is this valid for any page we could be handed? */
+ page = pfn_to_page(kaddr_to_pfn(ptr));
+ homecache_flush_cache(page, 0);
+ ptr += thispage;
+ size -= thispage;
+ }
+
+ return dma_addr;
+}
+EXPORT_SYMBOL(dma_map_single);
+
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sglist, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ WARN_ON(nents == 0 || sglist->length == 0);
+
+ for_each_sg(sglist, sg, nents, i) {
+ struct page *page;
+ sg->dma_address = sg_phys(sg);
+ page = pfn_to_page(sg->dma_address >> PAGE_SHIFT);
+ homecache_flush_cache(page, 0);
+ }
+
+ return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ homecache_flush_cache(page, 0);
+
+ return page_to_pa(page) + offset;
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ unsigned long start = PFN_DOWN(dma_handle);
+ unsigned long end = PFN_DOWN(dma_handle + size - 1);
+ unsigned long i;
+
+ BUG_ON(!valid_dma_direction(direction));
+ for (i = start; i <= end; ++i)
+ homecache_flush_cache(pfn_to_page(i), 0);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(nelems == 0 || sg[0].length == 0);
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+/*
+ * Flush and invalidate cache for scatterlist.
+ */
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sglist,
+ int nelems, enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+ WARN_ON(nelems == 0 || sglist->length == 0);
+
+ for_each_sg(sglist, sg, nelems, i) {
+ dma_sync_single_for_device(dev, sg->dma_address,
+ sg_dma_len(sg), direction);
+ }
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ dma_sync_single_for_cpu(dev, dma_handle + offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ dma_sync_single_for_device(dev, dma_handle + offset, size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+/*
+ * dma_alloc_noncoherent() returns non-cacheable memory, so there's no
+ * need to do any flushing here.
+ */
+void dma_cache_sync(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+}
+EXPORT_SYMBOL(dma_cache_sync);
diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c
new file mode 100644
index 000000000000..92ef925d2f8d
--- /dev/null
+++ b/arch/tile/kernel/proc.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/smp.h>
+#include <linux/seq_file.h>
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/timex.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/sysctl.h>
+#include <linux/hardirq.h>
+#include <linux/mman.h>
+#include <linux/smp.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/homecache.h>
+#include <arch/chip.h>
+
+
+/*
+ * Support /proc/cpuinfo
+ */
+
+#define cpu_to_ptr(n) ((void *)((long)(n)+1))
+#define ptr_to_cpu(p) ((long)(p) - 1)
+
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ int n = ptr_to_cpu(v);
+
+ if (n == 0) {
+ char buf[NR_CPUS*5];
+ cpulist_scnprintf(buf, sizeof(buf), cpu_online_mask);
+ seq_printf(m, "cpu count\t: %d\n", num_online_cpus());
+ seq_printf(m, "cpu list\t: %s\n", buf);
+ seq_printf(m, "model name\t: %s\n", chip_model);
+ seq_printf(m, "flags\t\t:\n"); /* nothing for now */
+ seq_printf(m, "cpu MHz\t\t: %llu.%06llu\n",
+ get_clock_rate() / 1000000,
+ (get_clock_rate() % 1000000));
+ seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
+ loops_per_jiffy/(500000/HZ),
+ (loops_per_jiffy/(5000/HZ)) % 100);
+ }
+
+#ifdef CONFIG_SMP
+ if (!cpu_online(n))
+ return 0;
+#endif
+
+ seq_printf(m, "processor\t: %d\n", n);
+
+ /* Print only num_online_cpus() blank lines total. */
+ if (cpumask_next(n, cpu_online_mask) < nr_cpu_ids)
+ seq_printf(m, "\n");
+
+ return 0;
+}
+
+static void *c_start(struct seq_file *m, loff_t *pos)
+{
+ return *pos < nr_cpu_ids ? cpu_to_ptr(*pos) : NULL;
+}
+static void *c_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return c_start(m, pos);
+}
+static void c_stop(struct seq_file *m, void *v)
+{
+}
+const struct seq_operations cpuinfo_op = {
+ .start = c_start,
+ .next = c_next,
+ .stop = c_stop,
+ .show = show_cpuinfo,
+};
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
new file mode 100644
index 000000000000..824f230e6d1a
--- /dev/null
+++ b/arch/tile/kernel/process.c
@@ -0,0 +1,647 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/preempt.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/kprobes.h>
+#include <linux/elfcore.h>
+#include <linux/tick.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/compat.h>
+#include <linux/hardirq.h>
+#include <linux/syscalls.h>
+#include <asm/system.h>
+#include <asm/stack.h>
+#include <asm/homecache.h>
+#include <arch/chip.h>
+#include <arch/abi.h>
+
+
+/*
+ * Use the (x86) "idle=poll" option to prefer low latency when leaving the
+ * idle loop over low power while in the idle loop, e.g. if we have
+ * one thread per core and we want to get threads out of futex waits fast.
+ */
+static int no_idle_nap;
+static int __init idle_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+
+ if (!strcmp(str, "poll")) {
+ printk("using polling idle threads.\n");
+ no_idle_nap = 1;
+ } else if (!strcmp(str, "halt"))
+ no_idle_nap = 0;
+ else
+ return -1;
+
+ return 0;
+}
+early_param("idle", idle_setup);
+
+/*
+ * The idle thread. There's no useful work to be
+ * done, so just try to conserve power and have a
+ * low exit latency (ie sit in a loop waiting for
+ * somebody to say that they'd like to reschedule)
+ */
+void cpu_idle(void)
+{
+ extern void _cpu_idle(void);
+ int cpu = smp_processor_id();
+
+
+ current_thread_info()->status |= TS_POLLING;
+
+ if (no_idle_nap) {
+ while (1) {
+ while (!need_resched())
+ cpu_relax();
+ schedule();
+ }
+ }
+
+ /* endless idle loop with no priority at all */
+ while (1) {
+ tick_nohz_stop_sched_tick(1);
+ while (!need_resched()) {
+ if (cpu_is_offline(cpu))
+ BUG(); /* no HOTPLUG_CPU */
+
+ local_irq_disable();
+ __get_cpu_var(irq_stat).idle_timestamp = jiffies;
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we
+ * test NEED_RESCHED:
+ */
+ smp_mb();
+
+ if (!need_resched())
+ _cpu_idle();
+ else
+ local_irq_enable();
+ current_thread_info()->status |= TS_POLLING;
+ }
+ tick_nohz_restart_sched_tick();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
+}
+
+struct thread_info *alloc_thread_info(struct task_struct *task)
+{
+ struct page *page;
+ int flags = GFP_KERNEL;
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+ flags |= __GFP_ZERO;
+#endif
+
+ page = alloc_pages(flags, THREAD_SIZE_ORDER);
+ if (!page)
+ return 0;
+
+ return (struct thread_info *)page_address(page);
+}
+
+/*
+ * Free a thread_info node, and all of its derivative
+ * data structures.
+ */
+void free_thread_info(struct thread_info *info)
+{
+ struct single_step_state *step_state = info->step_state;
+
+
+ if (step_state) {
+
+ /*
+ * FIXME: we don't munmap step_state->buffer
+ * because the mm_struct for this process (info->task->mm)
+ * has already been zeroed in exit_mm(). Keeping a
+ * reference to it here seems like a bad move, so this
+ * means we can't munmap() the buffer, and therefore if we
+ * ptrace multiple threads in a process, we will slowly
+ * leak user memory. (Note that as soon as the last
+ * thread in a process dies, we will reclaim all user
+ * memory including single-step buffers in the usual way.)
+ * We should either assign a kernel VA to this buffer
+ * somehow, or we should associate the buffer(s) with the
+ * mm itself so we can clean them up that way.
+ */
+ kfree(step_state);
+ }
+
+ free_page((unsigned long)info);
+}
+
+static void save_arch_state(struct thread_struct *t);
+
+extern void ret_from_fork(void);
+
+int copy_thread(unsigned long clone_flags, unsigned long sp,
+ unsigned long stack_size,
+ struct task_struct *p, struct pt_regs *regs)
+{
+ struct pt_regs *childregs;
+ unsigned long ksp;
+
+ /*
+ * When creating a new kernel thread we pass sp as zero.
+ * Assign it to a reasonable value now that we have the stack.
+ */
+ if (sp == 0 && regs->ex1 == PL_ICS_EX1(KERNEL_PL, 0))
+ sp = KSTK_TOP(p);
+
+ /*
+ * Do not clone step state from the parent; each thread
+ * must make its own lazily.
+ */
+ task_thread_info(p)->step_state = NULL;
+
+ /*
+ * Start new thread in ret_from_fork so it schedules properly
+ * and then return from interrupt like the parent.
+ */
+ p->thread.pc = (unsigned long) ret_from_fork;
+
+ /* Save user stack top pointer so we can ID the stack vm area later. */
+ p->thread.usp0 = sp;
+
+ /* Record the pid of the process that created this one. */
+ p->thread.creator_pid = current->pid;
+
+ /*
+ * Copy the registers onto the kernel stack so the
+ * return-from-interrupt code will reload it into registers.
+ */
+ childregs = task_pt_regs(p);
+ *childregs = *regs;
+ childregs->regs[0] = 0; /* return value is zero */
+ childregs->sp = sp; /* override with new user stack pointer */
+
+ /*
+ * Copy the callee-saved registers from the passed pt_regs struct
+ * into the context-switch callee-saved registers area.
+ * We have to restore the callee-saved registers since we may
+ * be cloning a userspace task with userspace register state,
+ * and we won't be unwinding the same kernel frames to restore them.
+ * Zero out the C ABI save area to mark the top of the stack.
+ */
+ ksp = (unsigned long) childregs;
+ ksp -= C_ABI_SAVE_AREA_SIZE; /* interrupt-entry save area */
+ ((long *)ksp)[0] = ((long *)ksp)[1] = 0;
+ ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long);
+ memcpy((void *)ksp, &regs->regs[CALLEE_SAVED_FIRST_REG],
+ CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long));
+ ksp -= C_ABI_SAVE_AREA_SIZE; /* __switch_to() save area */
+ ((long *)ksp)[0] = ((long *)ksp)[1] = 0;
+ p->thread.ksp = ksp;
+
+#if CHIP_HAS_TILE_DMA()
+ /*
+ * No DMA in the new thread. We model this on the fact that
+ * fork() clears the pending signals, alarms, and aio for the child.
+ */
+ memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state));
+ memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb));
+#endif
+
+#if CHIP_HAS_SN_PROC()
+ /* Likewise, the new thread is not running static processor code. */
+ p->thread.sn_proc_running = 0;
+ memset(&p->thread.sn_async_tlb, 0, sizeof(struct async_tlb));
+#endif
+
+#if CHIP_HAS_PROC_STATUS_SPR()
+ /* New thread has its miscellaneous processor state bits clear. */
+ p->thread.proc_status = 0;
+#endif
+
+
+
+ /*
+ * Start the new thread with the current architecture state
+ * (user interrupt masks, etc.).
+ */
+ save_arch_state(&p->thread);
+
+ return 0;
+}
+
+/*
+ * Return "current" if it looks plausible, or else a pointer to a dummy.
+ * This can be helpful if we are just trying to emit a clean panic.
+ */
+struct task_struct *validate_current(void)
+{
+ static struct task_struct corrupt = { .comm = "<corrupt>" };
+ struct task_struct *tsk = current;
+ if (unlikely((unsigned long)tsk < PAGE_OFFSET ||
+ (void *)tsk > high_memory ||
+ ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) {
+ printk("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer);
+ tsk = &corrupt;
+ }
+ return tsk;
+}
+
+/* Take and return the pointer to the previous task, for schedule_tail(). */
+struct task_struct *sim_notify_fork(struct task_struct *prev)
+{
+ struct task_struct *tsk = current;
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT |
+ (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS));
+ __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK |
+ (tsk->pid << _SIM_CONTROL_OPERATOR_BITS));
+ return prev;
+}
+
+int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
+{
+ struct pt_regs *ptregs = task_pt_regs(tsk);
+ elf_core_copy_regs(regs, ptregs);
+ return 1;
+}
+
+#if CHIP_HAS_TILE_DMA()
+
+/* Allow user processes to access the DMA SPRs */
+void grant_dma_mpls(void)
+{
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1);
+}
+
+/* Forbid user processes from accessing the DMA SPRs */
+void restrict_dma_mpls(void)
+{
+ __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
+ __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
+}
+
+/* Pause the DMA engine, then save off its state registers. */
+static void save_tile_dma_state(struct tile_dma_state *dma)
+{
+ unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS);
+ unsigned long post_suspend_state;
+
+ /* If we're running, suspend the engine. */
+ if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK)
+ __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
+
+ /*
+ * Wait for the engine to idle, then save regs. Note that we
+ * want to record the "running" bit from before suspension,
+ * and the "done" bit from after, so that we can properly
+ * distinguish a case where the user suspended the engine from
+ * the case where the kernel suspended as part of the context
+ * swap.
+ */
+ do {
+ post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS);
+ } while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK);
+
+ dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR);
+ dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR);
+ dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR);
+ dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR);
+ dma->strides = __insn_mfspr(SPR_DMA_STRIDE);
+ dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE);
+ dma->byte = __insn_mfspr(SPR_DMA_BYTE);
+ dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) |
+ (post_suspend_state & SPR_DMA_STATUS__DONE_MASK);
+}
+
+/* Restart a DMA that was running before we were context-switched out. */
+static void restore_tile_dma_state(struct thread_struct *t)
+{
+ const struct tile_dma_state *dma = &t->tile_dma_state;
+
+ /*
+ * The only way to restore the done bit is to run a zero
+ * length transaction.
+ */
+ if ((dma->status & SPR_DMA_STATUS__DONE_MASK) &&
+ !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) {
+ __insn_mtspr(SPR_DMA_BYTE, 0);
+ __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+ while (__insn_mfspr(SPR_DMA_USER_STATUS) &
+ SPR_DMA_STATUS__BUSY_MASK)
+ ;
+ }
+
+ __insn_mtspr(SPR_DMA_SRC_ADDR, dma->src);
+ __insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk);
+ __insn_mtspr(SPR_DMA_DST_ADDR, dma->dest);
+ __insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk);
+ __insn_mtspr(SPR_DMA_STRIDE, dma->strides);
+ __insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size);
+ __insn_mtspr(SPR_DMA_BYTE, dma->byte);
+
+ /*
+ * Restart the engine if we were running and not done.
+ * Clear a pending async DMA fault that we were waiting on return
+ * to user space to execute, since we expect the DMA engine
+ * to regenerate those faults for us now. Note that we don't
+ * try to clear the TIF_ASYNC_TLB flag, since it's relatively
+ * harmless if set, and it covers both DMA and the SN processor.
+ */
+ if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) {
+ t->dma_async_tlb.fault_num = 0;
+ __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+ }
+}
+
+#endif
+
+static void save_arch_state(struct thread_struct *t)
+{
+#if CHIP_HAS_SPLIT_INTR_MASK()
+ t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) |
+ ((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32);
+#else
+ t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0);
+#endif
+ t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0);
+ t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1);
+ t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0);
+ t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1);
+ t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2);
+ t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3);
+ t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS);
+#if CHIP_HAS_PROC_STATUS_SPR()
+ t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
+#endif
+}
+
+static void restore_arch_state(const struct thread_struct *t)
+{
+#if CHIP_HAS_SPLIT_INTR_MASK()
+ __insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask);
+ __insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32);
+#else
+ __insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask);
+#endif
+ __insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]);
+ __insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]);
+ __insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]);
+ __insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]);
+ __insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]);
+ __insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]);
+ __insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0);
+#if CHIP_HAS_PROC_STATUS_SPR()
+ __insn_mtspr(SPR_PROC_STATUS, t->proc_status);
+#endif
+#if CHIP_HAS_TILE_RTF_HWM()
+ /*
+ * Clear this whenever we switch back to a process in case
+ * the previous process was monkeying with it. Even if enabled
+ * in CBOX_MSR1 via TILE_RTF_HWM_MIN, it's still just a
+ * performance hint, so isn't worth a full save/restore.
+ */
+ __insn_mtspr(SPR_TILE_RTF_HWM, 0);
+#endif
+}
+
+
+void _prepare_arch_switch(struct task_struct *next)
+{
+#if CHIP_HAS_SN_PROC()
+ int snctl;
+#endif
+#if CHIP_HAS_TILE_DMA()
+ struct tile_dma_state *dma = &current->thread.tile_dma_state;
+ if (dma->enabled)
+ save_tile_dma_state(dma);
+#endif
+#if CHIP_HAS_SN_PROC()
+ /*
+ * Suspend the static network processor if it was running.
+ * We do not suspend the fabric itself, just like we don't
+ * try to suspend the UDN.
+ */
+ snctl = __insn_mfspr(SPR_SNCTL);
+ current->thread.sn_proc_running =
+ (snctl & SPR_SNCTL__FRZPROC_MASK) == 0;
+ if (current->thread.sn_proc_running)
+ __insn_mtspr(SPR_SNCTL, snctl | SPR_SNCTL__FRZPROC_MASK);
+#endif
+}
+
+
+extern struct task_struct *__switch_to(struct task_struct *prev,
+ struct task_struct *next,
+ unsigned long new_system_save_1_0);
+
+struct task_struct *__sched _switch_to(struct task_struct *prev,
+ struct task_struct *next)
+{
+ /* DMA state is already saved; save off other arch state. */
+ save_arch_state(&prev->thread);
+
+#if CHIP_HAS_TILE_DMA()
+ /*
+ * Restore DMA in new task if desired.
+ * Note that it is only safe to restart here since interrupts
+ * are disabled, so we can't take any DMATLB miss or access
+ * interrupts before we have finished switching stacks.
+ */
+ if (next->thread.tile_dma_state.enabled) {
+ restore_tile_dma_state(&next->thread);
+ grant_dma_mpls();
+ } else {
+ restrict_dma_mpls();
+ }
+#endif
+
+ /* Restore other arch state. */
+ restore_arch_state(&next->thread);
+
+#if CHIP_HAS_SN_PROC()
+ /*
+ * Restart static network processor in the new process
+ * if it was running before.
+ */
+ if (next->thread.sn_proc_running) {
+ int snctl = __insn_mfspr(SPR_SNCTL);
+ __insn_mtspr(SPR_SNCTL, snctl & ~SPR_SNCTL__FRZPROC_MASK);
+ }
+#endif
+
+
+ /*
+ * Switch kernel SP, PC, and callee-saved registers.
+ * In the context of the new task, return the old task pointer
+ * (i.e. the task that actually called __switch_to).
+ * Pass the value to use for SYSTEM_SAVE_1_0 when we reset our sp.
+ */
+ return __switch_to(prev, next, next_current_ksp0(next));
+}
+
+int _sys_fork(struct pt_regs *regs)
+{
+ return do_fork(SIGCHLD, regs->sp, regs, 0, NULL, NULL);
+}
+
+int _sys_clone(unsigned long clone_flags, unsigned long newsp,
+ int __user *parent_tidptr, int __user *child_tidptr,
+ struct pt_regs *regs)
+{
+ if (!newsp)
+ newsp = regs->sp;
+ return do_fork(clone_flags, newsp, regs, 0,
+ parent_tidptr, child_tidptr);
+}
+
+int _sys_vfork(struct pt_regs *regs)
+{
+ return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->sp,
+ regs, 0, NULL, NULL);
+}
+
+/*
+ * sys_execve() executes a new program.
+ */
+int _sys_execve(char __user *path, char __user *__user *argv,
+ char __user *__user *envp, struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ filename = getname(path);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = do_execve(filename, argv, envp, regs);
+ putname(filename);
+out:
+ return error;
+}
+
+#ifdef CONFIG_COMPAT
+int _compat_sys_execve(char __user *path, compat_uptr_t __user *argv,
+ compat_uptr_t __user *envp, struct pt_regs *regs)
+{
+ int error;
+ char *filename;
+
+ filename = getname(path);
+ error = PTR_ERR(filename);
+ if (IS_ERR(filename))
+ goto out;
+ error = compat_do_execve(filename, argv, envp, regs);
+ putname(filename);
+out:
+ return error;
+}
+#endif
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ struct KBacktraceIterator kbt;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ for (KBacktraceIterator_init(&kbt, p, NULL);
+ !KBacktraceIterator_end(&kbt);
+ KBacktraceIterator_next(&kbt)) {
+ if (!in_sched_functions(kbt.it.pc))
+ return kbt.it.pc;
+ }
+
+ return 0;
+}
+
+/*
+ * We pass in lr as zero (cleared in kernel_thread) and the caller
+ * part of the backtrace ABI on the stack also zeroed (in copy_thread)
+ * so that backtraces will stop with this function.
+ * Note that we don't use r0, since copy_thread() clears it.
+ */
+static void start_kernel_thread(int dummy, int (*fn)(int), int arg)
+{
+ do_exit(fn(arg));
+}
+
+/*
+ * Create a kernel thread
+ */
+int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+ regs.ex1 = PL_ICS_EX1(KERNEL_PL, 0); /* run at kernel PL, no ICS */
+ regs.pc = (long) start_kernel_thread;
+ regs.flags = PT_FLAGS_CALLER_SAVES; /* need to restore r1 and r2 */
+ regs.regs[1] = (long) fn; /* function pointer */
+ regs.regs[2] = (long) arg; /* parameter register */
+
+ /* Ok, create the new process.. */
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, &regs,
+ 0, NULL, NULL);
+}
+EXPORT_SYMBOL(kernel_thread);
+
+/* Flush thread state. */
+void flush_thread(void)
+{
+ /* Nothing */
+}
+
+/*
+ * Free current thread data structures etc..
+ */
+void exit_thread(void)
+{
+ /* Nothing */
+}
+
+#ifdef __tilegx__
+# define LINECOUNT 3
+# define EXTRA_NL "\n"
+#else
+# define LINECOUNT 4
+# define EXTRA_NL ""
+#endif
+
+void show_regs(struct pt_regs *regs)
+{
+ struct task_struct *tsk = validate_current();
+ int i, linebreak;
+ printk("\n");
+ printk(" Pid: %d, comm: %20s, CPU: %d\n",
+ tsk->pid, tsk->comm, smp_processor_id());
+ for (i = linebreak = 0; i < 53; ++i) {
+ printk(" r%-2d: "REGFMT, i, regs->regs[i]);
+ if (++linebreak == LINECOUNT) {
+ linebreak = 0;
+ printk("\n");
+ }
+ }
+ printk(" tp : "REGFMT EXTRA_NL " sp : "REGFMT" lr : "REGFMT"\n",
+ regs->tp, regs->sp, regs->lr);
+ printk(" pc : "REGFMT" ex1: %ld faultnum: %ld\n",
+ regs->pc, regs->ex1, regs->faultnum);
+
+ dump_stack_regs(regs);
+}
diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c
new file mode 100644
index 000000000000..468054928e7d
--- /dev/null
+++ b/arch/tile/kernel/ptrace.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Copied from i386: Ross Biro 1/23/92
+ */
+
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/kprobes.h>
+#include <linux/compat.h>
+#include <linux/uaccess.h>
+
+void user_enable_single_step(struct task_struct *child)
+{
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+/*
+ * This routine will put a word on the process's privileged stack.
+ */
+static void putreg(struct task_struct *task,
+ unsigned long addr, unsigned long value)
+{
+ unsigned int regno = addr / sizeof(unsigned long);
+ struct pt_regs *childregs = task_pt_regs(task);
+ childregs->regs[regno] = value;
+ childregs->flags |= PT_FLAGS_RESTORE_REGS;
+}
+
+static unsigned long getreg(struct task_struct *task, unsigned long addr)
+{
+ unsigned int regno = addr / sizeof(unsigned long);
+ struct pt_regs *childregs = task_pt_regs(task);
+ return childregs->regs[regno];
+}
+
+/*
+ * Called by kernel/ptrace.c when detaching..
+ */
+void ptrace_disable(struct task_struct *child)
+{
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+
+ /*
+ * These two are currently unused, but will be set by arch_ptrace()
+ * and used in the syscall assembly when we do support them.
+ */
+ clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+}
+
+long arch_ptrace(struct task_struct *child, long request, long addr, long data)
+{
+ unsigned long __user *datap;
+ unsigned long tmp;
+ int i;
+ long ret = -EIO;
+
+#ifdef CONFIG_COMPAT
+ if (task_thread_info(current)->status & TS_COMPAT)
+ data = (u32)data;
+ if (task_thread_info(child)->status & TS_COMPAT)
+ addr = (u32)addr;
+#endif
+ datap = (unsigned long __user *)data;
+
+ switch (request) {
+
+ case PTRACE_PEEKUSR: /* Read register from pt_regs. */
+ if (addr & (sizeof(data)-1))
+ break;
+ if (addr < 0 || addr >= PTREGS_SIZE)
+ break;
+ tmp = getreg(child, addr); /* Read register */
+ ret = put_user(tmp, datap);
+ break;
+
+ case PTRACE_POKEUSR: /* Write register in pt_regs. */
+ if (addr & (sizeof(data)-1))
+ break;
+ if (addr < 0 || addr >= PTREGS_SIZE)
+ break;
+ putreg(child, addr, data); /* Write register */
+ break;
+
+ case PTRACE_GETREGS: /* Get all registers from the child. */
+ if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE))
+ break;
+ for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
+ ret = __put_user(getreg(child, i), datap);
+ if (ret != 0)
+ break;
+ datap++;
+ }
+ break;
+
+ case PTRACE_SETREGS: /* Set all registers in the child. */
+ if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE))
+ break;
+ for (i = 0; i < PTREGS_SIZE; i += sizeof(long)) {
+ ret = __get_user(tmp, datap);
+ if (ret != 0)
+ break;
+ putreg(child, i, tmp);
+ datap++;
+ }
+ break;
+
+ case PTRACE_GETFPREGS: /* Get the child FPU state. */
+ case PTRACE_SETFPREGS: /* Set the child FPU state. */
+ break;
+
+ case PTRACE_SETOPTIONS:
+ /* Support TILE-specific ptrace options. */
+ child->ptrace &= ~PT_TRACE_MASK_TILE;
+ tmp = data & PTRACE_O_MASK_TILE;
+ data &= ~PTRACE_O_MASK_TILE;
+ ret = ptrace_request(child, request, addr, data);
+ if (tmp & PTRACE_O_TRACEMIGRATE)
+ child->ptrace |= PT_TRACE_MIGRATE;
+ break;
+
+ default:
+#ifdef CONFIG_COMPAT
+ if (task_thread_info(current)->status & TS_COMPAT) {
+ ret = compat_ptrace_request(child, request,
+ addr, data);
+ break;
+ }
+#endif
+ ret = ptrace_request(child, request, addr, data);
+ break;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_COMPAT
+/* Not used; we handle compat issues in arch_ptrace() directly. */
+long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
+ compat_ulong_t addr, compat_ulong_t data)
+{
+ BUG();
+}
+#endif
+
+void do_syscall_trace(void)
+{
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+
+ /*
+ * The 0x80 provides a way for the tracing parent to distinguish
+ * between a syscall stop and SIGTRAP delivery
+ */
+ ptrace_notify(SIGTRAP|((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0));
+
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
+
+void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
+{
+ struct siginfo info;
+
+ memset(&info, 0, sizeof(info));
+ info.si_signo = SIGTRAP;
+ info.si_code = TRAP_BRKPT;
+ info.si_addr = (void __user *) regs->pc;
+
+ /* Send us the fakey SIGTRAP */
+ force_sig_info(SIGTRAP, &info, tsk);
+}
+
+/* Handle synthetic interrupt delivered only by the simulator. */
+void __kprobes do_breakpoint(struct pt_regs* regs, int fault_num)
+{
+ send_sigtrap(current, regs, fault_num);
+}
diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c
new file mode 100644
index 000000000000..a4523923605e
--- /dev/null
+++ b/arch/tile/kernel/reboot.c
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/stddef.h>
+#include <linux/reboot.h>
+#include <linux/smp.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <hv/hypervisor.h>
+
+#ifndef CONFIG_SMP
+#define smp_send_stop()
+#endif
+
+void machine_halt(void)
+{
+ warn_early_printk();
+ raw_local_irq_disable_all();
+ smp_send_stop();
+ hv_halt();
+}
+
+void machine_power_off(void)
+{
+ warn_early_printk();
+ raw_local_irq_disable_all();
+ smp_send_stop();
+ hv_power_off();
+}
+
+void machine_restart(char *cmd)
+{
+ raw_local_irq_disable_all();
+ smp_send_stop();
+ hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd);
+}
+
+/*
+ * Power off function, if any
+ */
+void (*pm_power_off)(void) = machine_power_off;
diff --git a/arch/tile/kernel/regs_32.S b/arch/tile/kernel/regs_32.S
new file mode 100644
index 000000000000..e88d6e122783
--- /dev/null
+++ b/arch/tile/kernel/regs_32.S
@@ -0,0 +1,145 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/system.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <arch/spr_def.h>
+#include <asm/processor.h>
+
+/*
+ * See <asm/system.h>; called with prev and next task_struct pointers.
+ * "prev" is returned in r0 for _switch_to and also for ret_from_fork.
+ *
+ * We want to save pc/sp in "prev", and get the new pc/sp from "next".
+ * We also need to save all the callee-saved registers on the stack.
+ *
+ * Intel enables/disables access to the hardware cycle counter in
+ * seccomp (secure computing) environments if necessary, based on
+ * has_secure_computing(). We might want to do this at some point,
+ * though it would require virtualizing the other SPRs under WORLD_ACCESS.
+ *
+ * Since we're saving to the stack, we omit sp from this list.
+ * And for parallels with other architectures, we save lr separately,
+ * in the thread_struct itself (as the "pc" field).
+ *
+ * This code also needs to be aligned with process.c copy_thread()
+ */
+
+#if CALLEE_SAVED_REGS_COUNT != 24
+# error Mismatch between <asm/system.h> and kernel/entry.S
+#endif
+#define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 4)
+
+#define SAVE_REG(r) { sw r12, r; addi r12, r12, 4 }
+#define LOAD_REG(r) { lw r, r12; addi r12, r12, 4 }
+#define FOR_EACH_CALLEE_SAVED_REG(f) \
+ f(r30); f(r31); \
+ f(r32); f(r33); f(r34); f(r35); f(r36); f(r37); f(r38); f(r39); \
+ f(r40); f(r41); f(r42); f(r43); f(r44); f(r45); f(r46); f(r47); \
+ f(r48); f(r49); f(r50); f(r51); f(r52);
+
+STD_ENTRY_SECTION(__switch_to, .sched.text)
+ {
+ move r10, sp
+ sw sp, lr
+ addi sp, sp, -FRAME_SIZE
+ }
+ {
+ addi r11, sp, 4
+ addi r12, sp, 8
+ }
+ {
+ sw r11, r10
+ addli r4, r1, TASK_STRUCT_THREAD_KSP_OFFSET
+ }
+ {
+ lw r13, r4 /* Load new sp to a temp register early. */
+ addli r3, r0, TASK_STRUCT_THREAD_KSP_OFFSET
+ }
+ FOR_EACH_CALLEE_SAVED_REG(SAVE_REG)
+ {
+ sw r3, sp
+ addli r3, r0, TASK_STRUCT_THREAD_PC_OFFSET
+ }
+ {
+ sw r3, lr
+ addli r4, r1, TASK_STRUCT_THREAD_PC_OFFSET
+ }
+ {
+ lw lr, r4
+ addi r12, r13, 8
+ }
+ {
+ /* Update sp and ksp0 simultaneously to avoid backtracer warnings. */
+ move sp, r13
+ mtspr SYSTEM_SAVE_1_0, r2
+ }
+ FOR_EACH_CALLEE_SAVED_REG(LOAD_REG)
+.L__switch_to_pc:
+ {
+ addi sp, sp, FRAME_SIZE
+ jrp lr /* r0 is still valid here, so return it */
+ }
+ STD_ENDPROC(__switch_to)
+
+/* Return a suitable address for the backtracer for suspended threads */
+STD_ENTRY_SECTION(get_switch_to_pc, .sched.text)
+ lnk r0
+ {
+ addli r0, r0, .L__switch_to_pc - .
+ jrp lr
+ }
+ STD_ENDPROC(get_switch_to_pc)
+
+STD_ENTRY(get_pt_regs)
+ .irp reg, r0, r1, r2, r3, r4, r5, r6, r7, \
+ r8, r9, r10, r11, r12, r13, r14, r15, \
+ r16, r17, r18, r19, r20, r21, r22, r23, \
+ r24, r25, r26, r27, r28, r29, r30, r31, \
+ r32, r33, r34, r35, r36, r37, r38, r39, \
+ r40, r41, r42, r43, r44, r45, r46, r47, \
+ r48, r49, r50, r51, r52, tp, sp
+ {
+ sw r0, \reg
+ addi r0, r0, 4
+ }
+ .endr
+ {
+ sw r0, lr
+ addi r0, r0, PTREGS_OFFSET_PC - PTREGS_OFFSET_LR
+ }
+ lnk r1
+ {
+ sw r0, r1
+ addi r0, r0, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC
+ }
+ mfspr r1, INTERRUPT_CRITICAL_SECTION
+ shli r1, r1, SPR_EX_CONTEXT_1_1__ICS_SHIFT
+ ori r1, r1, KERNEL_PL
+ {
+ sw r0, r1
+ addi r0, r0, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1
+ }
+ {
+ sw r0, zero /* clear faultnum */
+ addi r0, r0, PTREGS_OFFSET_ORIG_R0 - PTREGS_OFFSET_FAULTNUM
+ }
+ {
+ sw r0, zero /* clear orig_r0 */
+ addli r0, r0, -PTREGS_OFFSET_ORIG_R0 /* restore r0 to base */
+ }
+ jrp lr
+ STD_ENDPROC(get_pt_regs)
diff --git a/arch/tile/kernel/relocate_kernel.S b/arch/tile/kernel/relocate_kernel.S
new file mode 100644
index 000000000000..010b418515f8
--- /dev/null
+++ b/arch/tile/kernel/relocate_kernel.S
@@ -0,0 +1,280 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * copy new kernel into place and then call hv_reexec
+ *
+ */
+
+#include <linux/linkage.h>
+#include <arch/chip.h>
+#include <asm/page.h>
+#include <hv/hypervisor.h>
+
+#define ___hvb MEM_SV_INTRPT + HV_GLUE_START_CPA
+
+#define ___hv_dispatch(f) (___hvb + (HV_DISPATCH_ENTRY_SIZE * f))
+
+#define ___hv_console_putc ___hv_dispatch(HV_DISPATCH_CONSOLE_PUTC)
+#define ___hv_halt ___hv_dispatch(HV_DISPATCH_HALT)
+#define ___hv_reexec ___hv_dispatch(HV_DISPATCH_REEXEC)
+#define ___hv_flush_remote ___hv_dispatch(HV_DISPATCH_FLUSH_REMOTE)
+
+#undef RELOCATE_NEW_KERNEL_VERBOSE
+
+STD_ENTRY(relocate_new_kernel)
+
+ move r30, r0 /* page list */
+ move r31, r1 /* address of page we are on */
+ move r32, r2 /* start address of new kernel */
+
+ shri r1, r1, PAGE_SHIFT
+ addi r1, r1, 1
+ shli sp, r1, PAGE_SHIFT
+ addi sp, sp, -8
+ /* we now have a stack (whether we need one or not) */
+
+ moveli r40, lo16(___hv_console_putc)
+ auli r40, r40, ha16(___hv_console_putc)
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'r'
+ jalr r40
+
+ moveli r0, '_'
+ jalr r40
+
+ moveli r0, 'n'
+ jalr r40
+
+ moveli r0, '_'
+ jalr r40
+
+ moveli r0, 'k'
+ jalr r40
+
+ moveli r0, '\n'
+ jalr r40
+#endif
+
+ /*
+ * Throughout this code r30 is pointer to the element of page
+ * list we are working on.
+ *
+ * Normally we get to the next element of the page list by
+ * incrementing r30 by four. The exception is if the element
+ * on the page list is an IND_INDIRECTION in which case we use
+ * the element with the low bits masked off as the new value
+ * of r30.
+ *
+ * To get this started, we need the value passed to us (which
+ * will always be an IND_INDIRECTION) in memory somewhere with
+ * r30 pointing at it. To do that, we push the value passed
+ * to us on the stack and make r30 point to it.
+ */
+
+ sw sp, r30
+ move r30, sp
+ addi sp, sp, -8
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ /*
+ * On TILEPro, we need to flush all tiles' caches, since we may
+ * have been doing hash-for-home caching there. Note that we
+ * must do this _after_ we're completely done modifying any memory
+ * other than our output buffer (which we know is locally cached).
+ * We want the caches to be fully clean when we do the reexec,
+ * because the hypervisor is going to do this flush again at that
+ * point, and we don't want that second flush to overwrite any memory.
+ */
+ {
+ move r0, zero /* cache_pa */
+ move r1, zero
+ }
+ {
+ auli r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */
+ movei r3, -1 /* cache_cpumask; -1 means all client tiles */
+ }
+ {
+ move r4, zero /* tlb_va */
+ move r5, zero /* tlb_length */
+ }
+ {
+ move r6, zero /* tlb_pgsize */
+ move r7, zero /* tlb_cpumask */
+ }
+ {
+ move r8, zero /* asids */
+ moveli r20, lo16(___hv_flush_remote)
+ }
+ {
+ move r9, zero /* asidcount */
+ auli r20, r20, ha16(___hv_flush_remote)
+ }
+
+ jalr r20
+#endif
+
+ /* r33 is destination pointer, default to zero */
+
+ moveli r33, 0
+
+.Lloop: lw r10, r30
+
+ andi r9, r10, 0xf /* low 4 bits tell us what type it is */
+ xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */
+
+ seqi r0, r9, 0x1 /* IND_DESTINATION */
+ bzt r0, .Ltry2
+
+ move r33, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'd'
+ jalr r40
+#endif
+
+ addi r30, r30, 4
+ j .Lloop
+
+.Ltry2:
+ seqi r0, r9, 0x2 /* IND_INDIRECTION */
+ bzt r0, .Ltry4
+
+ move r30, r10
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'i'
+ jalr r40
+#endif
+
+ j .Lloop
+
+.Ltry4:
+ seqi r0, r9, 0x4 /* IND_DONE */
+ bzt r0, .Ltry8
+
+ mf
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 'D'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+#endif
+
+ move r0, r32
+ moveli r1, 0 /* arg to hv_reexec is 64 bits */
+
+ moveli r41, lo16(___hv_reexec)
+ auli r41, r41, ha16(___hv_reexec)
+
+ jalr r41
+
+ /* we should not get here */
+
+ moveli r0, '?'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+
+ j .Lhalt
+
+.Ltry8: seqi r0, r9, 0x8 /* IND_SOURCE */
+ bz r0, .Lerr /* unknown type */
+
+ /* copy page at r10 to page at r33 */
+
+ move r11, r33
+
+ moveli r0, lo16(PAGE_SIZE)
+ auli r0, r0, ha16(PAGE_SIZE)
+ add r33, r33, r0
+
+ /* copy word at r10 to word at r11 until r11 equals r33 */
+
+ /* We know page size must be multiple of 16, so we can unroll
+ * 16 times safely without any edge case checking.
+ *
+ * Issue a flush of the destination every 16 words to avoid
+ * incoherence when starting the new kernel. (Now this is
+ * just good paranoia because the hv_reexec call will also
+ * take care of this.)
+ */
+
+1:
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0; addi r11, r11, 4 }
+ { lw r0, r10; addi r10, r10, 4 }
+ { sw r11, r0 }
+ { flush r11 ; addi r11, r11, 4 }
+
+ seq r0, r33, r11
+ bzt r0, 1b
+
+#ifdef RELOCATE_NEW_KERNEL_VERBOSE
+ moveli r0, 's'
+ jalr r40
+#endif
+
+ addi r30, r30, 4
+ j .Lloop
+
+
+.Lerr: moveli r0, 'e'
+ jalr r40
+ moveli r0, 'r'
+ jalr r40
+ moveli r0, 'r'
+ jalr r40
+ moveli r0, '\n'
+ jalr r40
+.Lhalt:
+ moveli r41, lo16(___hv_halt)
+ auli r41, r41, ha16(___hv_halt)
+
+ jalr r41
+ STD_ENDPROC(relocate_new_kernel)
+
+ .section .rodata,"a"
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long .Lend_relocate_new_kernel - relocate_new_kernel
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
new file mode 100644
index 000000000000..934136b61ceb
--- /dev/null
+++ b/arch/tile/kernel/setup.c
@@ -0,0 +1,1497 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mmzone.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/node.h>
+#include <linux/cpu.h>
+#include <linux/ioport.h>
+#include <linux/kexec.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/io.h>
+#include <linux/highmem.h>
+#include <linux/smp.h>
+#include <linux/timex.h>
+#include <asm/setup.h>
+#include <asm/sections.h>
+#include <asm/sections.h>
+#include <asm/cacheflush.h>
+#include <asm/cacheflush.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+
+/* <linux/smp.h> doesn't provide this definition. */
+#ifndef CONFIG_SMP
+#define setup_max_cpus 1
+#endif
+
+static inline int ABS(int x) { return x >= 0 ? x : -x; }
+
+/* Chip information */
+char chip_model[64] __write_once;
+
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+
+/* We only create bootmem data on node 0. */
+static bootmem_data_t __initdata node0_bdata;
+
+/* Information on the NUMA nodes that we compute early */
+unsigned long __cpuinitdata node_start_pfn[MAX_NUMNODES];
+unsigned long __cpuinitdata node_end_pfn[MAX_NUMNODES];
+unsigned long __initdata node_memmap_pfn[MAX_NUMNODES];
+unsigned long __initdata node_percpu_pfn[MAX_NUMNODES];
+unsigned long __initdata node_free_pfn[MAX_NUMNODES];
+
+#ifdef CONFIG_HIGHMEM
+/* Page frame index of end of lowmem on each controller. */
+unsigned long __cpuinitdata node_lowmem_end_pfn[MAX_NUMNODES];
+
+/* Number of pages that can be mapped into lowmem. */
+static unsigned long __initdata mappable_physpages;
+#endif
+
+/* Data on which physical memory controller corresponds to which NUMA node */
+int node_controller[MAX_NUMNODES] = { [0 ... MAX_NUMNODES-1] = -1 };
+
+#ifdef CONFIG_HIGHMEM
+/* Map information from VAs to PAs */
+unsigned long pbase_map[1 << (32 - HPAGE_SHIFT)]
+ __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(pbase_map);
+
+/* Map information from PAs to VAs */
+void *vbase_map[NR_PA_HIGHBIT_VALUES]
+ __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(vbase_map);
+#endif
+
+/* Node number as a function of the high PA bits */
+int highbits_to_node[NR_PA_HIGHBIT_VALUES] __write_once;
+EXPORT_SYMBOL(highbits_to_node);
+
+static unsigned int __initdata maxmem_pfn = -1U;
+static unsigned int __initdata maxnodemem_pfn[MAX_NUMNODES] = {
+ [0 ... MAX_NUMNODES-1] = -1U
+};
+static nodemask_t __initdata isolnodes;
+
+#ifdef CONFIG_PCI
+enum { DEFAULT_PCI_RESERVE_MB = 64 };
+static unsigned int __initdata pci_reserve_mb = DEFAULT_PCI_RESERVE_MB;
+unsigned long __initdata pci_reserve_start_pfn = -1U;
+unsigned long __initdata pci_reserve_end_pfn = -1U;
+#endif
+
+static int __init setup_maxmem(char *str)
+{
+ long maxmem_mb;
+ if (str == NULL || strict_strtol(str, 0, &maxmem_mb) != 0 ||
+ maxmem_mb == 0)
+ return -EINVAL;
+
+ maxmem_pfn = (maxmem_mb >> (HPAGE_SHIFT - 20)) <<
+ (HPAGE_SHIFT - PAGE_SHIFT);
+ printk("Forcing RAM used to no more than %dMB\n",
+ maxmem_pfn >> (20 - PAGE_SHIFT));
+ return 0;
+}
+early_param("maxmem", setup_maxmem);
+
+static int __init setup_maxnodemem(char *str)
+{
+ char *endp;
+ long maxnodemem_mb, node;
+
+ node = str ? simple_strtoul(str, &endp, 0) : INT_MAX;
+ if (node >= MAX_NUMNODES || *endp != ':' ||
+ strict_strtol(endp+1, 0, &maxnodemem_mb) != 0)
+ return -EINVAL;
+
+ maxnodemem_pfn[node] = (maxnodemem_mb >> (HPAGE_SHIFT - 20)) <<
+ (HPAGE_SHIFT - PAGE_SHIFT);
+ printk("Forcing RAM used on node %ld to no more than %dMB\n",
+ node, maxnodemem_pfn[node] >> (20 - PAGE_SHIFT));
+ return 0;
+}
+early_param("maxnodemem", setup_maxnodemem);
+
+static int __init setup_isolnodes(char *str)
+{
+ char buf[MAX_NUMNODES * 5];
+ if (str == NULL || nodelist_parse(str, isolnodes) != 0)
+ return -EINVAL;
+
+ nodelist_scnprintf(buf, sizeof(buf), isolnodes);
+ printk("Set isolnodes value to '%s'\n", buf);
+ return 0;
+}
+early_param("isolnodes", setup_isolnodes);
+
+#ifdef CONFIG_PCI
+static int __init setup_pci_reserve(char* str)
+{
+ unsigned long mb;
+
+ if (str == NULL || strict_strtoul(str, 0, &mb) != 0 ||
+ mb > 3 * 1024)
+ return -EINVAL;
+
+ pci_reserve_mb = mb;
+ printk("Reserving %dMB for PCIE root complex mappings\n",
+ pci_reserve_mb);
+ return 0;
+}
+early_param("pci_reserve", setup_pci_reserve);
+#endif
+
+#ifndef __tilegx__
+/*
+ * vmalloc=size forces the vmalloc area to be exactly 'size' bytes.
+ * This can be used to increase (or decrease) the vmalloc area.
+ */
+static int __init parse_vmalloc(char *arg)
+{
+ if (!arg)
+ return -EINVAL;
+
+ VMALLOC_RESERVE = (memparse(arg, &arg) + PGDIR_SIZE - 1) & PGDIR_MASK;
+
+ /* See validate_va() for more on this test. */
+ if ((long)_VMALLOC_START >= 0)
+ early_panic("\"vmalloc=%#lx\" value too large: maximum %#lx\n",
+ VMALLOC_RESERVE, _VMALLOC_END - 0x80000000UL);
+
+ return 0;
+}
+early_param("vmalloc", parse_vmalloc);
+#endif
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * Determine for each controller where its lowmem is mapped and how
+ * much of it is mapped there. On controller zero, the first few
+ * megabytes are mapped at 0xfd000000 as code, so in principle we
+ * could start our data mappings higher up, but for now we don't
+ * bother, to avoid additional confusion.
+ *
+ * One question is whether, on systems with more than 768 Mb and
+ * controllers of different sizes, to map in a proportionate amount of
+ * each one, or to try to map the same amount from each controller.
+ * (E.g. if we have three controllers with 256MB, 1GB, and 256MB
+ * respectively, do we map 256MB from each, or do we map 128 MB, 512
+ * MB, and 128 MB respectively?) For now we use a proportionate
+ * solution like the latter.
+ *
+ * The VA/PA mapping demands that we align our decisions at 16 MB
+ * boundaries so that we can rapidly convert VA to PA.
+ */
+static void *__init setup_pa_va_mapping(void)
+{
+ unsigned long curr_pages = 0;
+ unsigned long vaddr = PAGE_OFFSET;
+ nodemask_t highonlynodes = isolnodes;
+ int i, j;
+
+ memset(pbase_map, -1, sizeof(pbase_map));
+ memset(vbase_map, -1, sizeof(vbase_map));
+
+ /* Node zero cannot be isolated for LOWMEM purposes. */
+ node_clear(0, highonlynodes);
+
+ /* Count up the number of pages on non-highonlynodes controllers. */
+ mappable_physpages = 0;
+ for_each_online_node(i) {
+ if (!node_isset(i, highonlynodes))
+ mappable_physpages +=
+ node_end_pfn[i] - node_start_pfn[i];
+ }
+
+ for_each_online_node(i) {
+ unsigned long start = node_start_pfn[i];
+ unsigned long end = node_end_pfn[i];
+ unsigned long size = end - start;
+ unsigned long vaddr_end;
+
+ if (node_isset(i, highonlynodes)) {
+ /* Mark this controller as having no lowmem. */
+ node_lowmem_end_pfn[i] = start;
+ continue;
+ }
+
+ curr_pages += size;
+ if (mappable_physpages > MAXMEM_PFN) {
+ vaddr_end = PAGE_OFFSET +
+ (((u64)curr_pages * MAXMEM_PFN /
+ mappable_physpages)
+ << PAGE_SHIFT);
+ } else {
+ vaddr_end = PAGE_OFFSET + (curr_pages << PAGE_SHIFT);
+ }
+ for (j = 0; vaddr < vaddr_end; vaddr += HPAGE_SIZE, ++j) {
+ unsigned long this_pfn =
+ start + (j << HUGETLB_PAGE_ORDER);
+ pbase_map[vaddr >> HPAGE_SHIFT] = this_pfn;
+ if (vbase_map[__pfn_to_highbits(this_pfn)] ==
+ (void *)-1)
+ vbase_map[__pfn_to_highbits(this_pfn)] =
+ (void *)(vaddr & HPAGE_MASK);
+ }
+ node_lowmem_end_pfn[i] = start + (j << HUGETLB_PAGE_ORDER);
+ BUG_ON(node_lowmem_end_pfn[i] > end);
+ }
+
+ /* Return highest address of any mapped memory. */
+ return (void *)vaddr;
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * Register our most important memory mappings with the debug stub.
+ *
+ * This is up to 4 mappings for lowmem, one mapping per memory
+ * controller, plus one for our text segment.
+ */
+void __cpuinit store_permanent_mappings(void)
+{
+ int i;
+
+ for_each_online_node(i) {
+ HV_PhysAddr pa = ((HV_PhysAddr)node_start_pfn[i]) << PAGE_SHIFT;
+#ifdef CONFIG_HIGHMEM
+ HV_PhysAddr high_mapped_pa = node_lowmem_end_pfn[i];
+#else
+ HV_PhysAddr high_mapped_pa = node_end_pfn[i];
+#endif
+
+ unsigned long pages = high_mapped_pa - node_start_pfn[i];
+ HV_VirtAddr addr = (HV_VirtAddr) __va(pa);
+ hv_store_mapping(addr, pages << PAGE_SHIFT, pa);
+ }
+
+ hv_store_mapping((HV_VirtAddr)_stext,
+ (uint32_t)(_einittext - _stext), 0);
+}
+
+/*
+ * Use hv_inquire_physical() to populate node_{start,end}_pfn[]
+ * and node_online_map, doing suitable sanity-checking.
+ * Also set min_low_pfn, max_low_pfn, and max_pfn.
+ */
+static void __init setup_memory(void)
+{
+ int i, j;
+ int highbits_seen[NR_PA_HIGHBIT_VALUES] = { 0 };
+#ifdef CONFIG_HIGHMEM
+ long highmem_pages;
+#endif
+#ifndef __tilegx__
+ int cap;
+#endif
+#if defined(CONFIG_HIGHMEM) || defined(__tilegx__)
+ long lowmem_pages;
+#endif
+
+ /* We are using a char to hold the cpu_2_node[] mapping */
+ BUG_ON(MAX_NUMNODES > 127);
+
+ /* Discover the ranges of memory available to us */
+ for (i = 0; ; ++i) {
+ unsigned long start, size, end, highbits;
+ HV_PhysAddrRange range = hv_inquire_physical(i);
+ if (range.size == 0)
+ break;
+#ifdef CONFIG_FLATMEM
+ if (i > 0) {
+ printk("Can't use discontiguous PAs: %#llx..%#llx\n",
+ range.size, range.start + range.size);
+ continue;
+ }
+#endif
+#ifndef __tilegx__
+ if ((unsigned long)range.start) {
+ printk("Range not at 4GB multiple: %#llx..%#llx\n",
+ range.start, range.start + range.size);
+ continue;
+ }
+#endif
+ if ((range.start & (HPAGE_SIZE-1)) != 0 ||
+ (range.size & (HPAGE_SIZE-1)) != 0) {
+ unsigned long long start_pa = range.start;
+ unsigned long long size = range.size;
+ range.start = (start_pa + HPAGE_SIZE - 1) & HPAGE_MASK;
+ range.size -= (range.start - start_pa);
+ range.size &= HPAGE_MASK;
+ printk("Range not hugepage-aligned: %#llx..%#llx:"
+ " now %#llx-%#llx\n",
+ start_pa, start_pa + size,
+ range.start, range.start + range.size);
+ }
+ highbits = __pa_to_highbits(range.start);
+ if (highbits >= NR_PA_HIGHBIT_VALUES) {
+ printk("PA high bits too high: %#llx..%#llx\n",
+ range.start, range.start + range.size);
+ continue;
+ }
+ if (highbits_seen[highbits]) {
+ printk("Range overlaps in high bits: %#llx..%#llx\n",
+ range.start, range.start + range.size);
+ continue;
+ }
+ highbits_seen[highbits] = 1;
+ if (PFN_DOWN(range.size) > maxnodemem_pfn[i]) {
+ int size = maxnodemem_pfn[i];
+ if (size > 0) {
+ printk("Maxnodemem reduced node %d to"
+ " %d pages\n", i, size);
+ range.size = (HV_PhysAddr)size << PAGE_SHIFT;
+ } else {
+ printk("Maxnodemem disabled node %d\n", i);
+ continue;
+ }
+ }
+ if (num_physpages + PFN_DOWN(range.size) > maxmem_pfn) {
+ int size = maxmem_pfn - num_physpages;
+ if (size > 0) {
+ printk("Maxmem reduced node %d to %d pages\n",
+ i, size);
+ range.size = (HV_PhysAddr)size << PAGE_SHIFT;
+ } else {
+ printk("Maxmem disabled node %d\n", i);
+ continue;
+ }
+ }
+ if (i >= MAX_NUMNODES) {
+ printk("Too many PA nodes (#%d): %#llx...%#llx\n",
+ i, range.size, range.size + range.start);
+ continue;
+ }
+
+ start = range.start >> PAGE_SHIFT;
+ size = range.size >> PAGE_SHIFT;
+ end = start + size;
+
+#ifndef __tilegx__
+ if (((HV_PhysAddr)end << PAGE_SHIFT) !=
+ (range.start + range.size)) {
+ printk("PAs too high to represent: %#llx..%#llx\n",
+ range.start, range.start + range.size);
+ continue;
+ }
+#endif
+#ifdef CONFIG_PCI
+ /*
+ * Blocks that overlap the pci reserved region must
+ * have enough space to hold the maximum percpu data
+ * region at the top of the range. If there isn't
+ * enough space above the reserved region, just
+ * truncate the node.
+ */
+ if (start <= pci_reserve_start_pfn &&
+ end > pci_reserve_start_pfn) {
+ unsigned int per_cpu_size =
+ __per_cpu_end - __per_cpu_start;
+ unsigned int percpu_pages =
+ NR_CPUS * (PFN_UP(per_cpu_size) >> PAGE_SHIFT);
+ if (end < pci_reserve_end_pfn + percpu_pages) {
+ end = pci_reserve_start_pfn;
+ printk("PCI mapping region reduced node %d to"
+ " %ld pages\n", i, end - start);
+ }
+ }
+#endif
+
+ for (j = __pfn_to_highbits(start);
+ j <= __pfn_to_highbits(end - 1); j++)
+ highbits_to_node[j] = i;
+
+ node_start_pfn[i] = start;
+ node_end_pfn[i] = end;
+ node_controller[i] = range.controller;
+ num_physpages += size;
+ max_pfn = end;
+
+ /* Mark node as online */
+ node_set(i, node_online_map);
+ node_set(i, node_possible_map);
+ }
+
+#ifndef __tilegx__
+ /*
+ * For 4KB pages, mem_map "struct page" data is 1% of the size
+ * of the physical memory, so can be quite big (640 MB for
+ * four 16G zones). These structures must be mapped in
+ * lowmem, and since we currently cap out at about 768 MB,
+ * it's impractical to try to use this much address space.
+ * For now, arbitrarily cap the amount of physical memory
+ * we're willing to use at 8 million pages (32GB of 4KB pages).
+ */
+ cap = 8 * 1024 * 1024; /* 8 million pages */
+ if (num_physpages > cap) {
+ int num_nodes = num_online_nodes();
+ int cap_each = cap / num_nodes;
+ unsigned long dropped_pages = 0;
+ for (i = 0; i < num_nodes; ++i) {
+ int size = node_end_pfn[i] - node_start_pfn[i];
+ if (size > cap_each) {
+ dropped_pages += (size - cap_each);
+ node_end_pfn[i] = node_start_pfn[i] + cap_each;
+ }
+ }
+ num_physpages -= dropped_pages;
+ printk(KERN_WARNING "Only using %ldMB memory;"
+ " ignoring %ldMB.\n",
+ num_physpages >> (20 - PAGE_SHIFT),
+ dropped_pages >> (20 - PAGE_SHIFT));
+ printk(KERN_WARNING "Consider using a larger page size.\n");
+ }
+#endif
+
+ /* Heap starts just above the last loaded address. */
+ min_low_pfn = PFN_UP((unsigned long)_end - PAGE_OFFSET);
+
+#ifdef CONFIG_HIGHMEM
+ /* Find where we map lowmem from each controller. */
+ high_memory = setup_pa_va_mapping();
+
+ /* Set max_low_pfn based on what node 0 can directly address. */
+ max_low_pfn = node_lowmem_end_pfn[0];
+
+ lowmem_pages = (mappable_physpages > MAXMEM_PFN) ?
+ MAXMEM_PFN : mappable_physpages;
+ highmem_pages = (long) (num_physpages - lowmem_pages);
+
+ printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
+ pages_to_mb(highmem_pages > 0 ? highmem_pages : 0));
+ printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
+ pages_to_mb(lowmem_pages));
+#else
+ /* Set max_low_pfn based on what node 0 can directly address. */
+ max_low_pfn = node_end_pfn[0];
+
+#ifndef __tilegx__
+ if (node_end_pfn[0] > MAXMEM_PFN) {
+ printk(KERN_WARNING "Only using %ldMB LOWMEM.\n",
+ MAXMEM>>20);
+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
+ max_low_pfn = MAXMEM_PFN;
+ max_pfn = MAXMEM_PFN;
+ num_physpages = MAXMEM_PFN;
+ node_end_pfn[0] = MAXMEM_PFN;
+ } else {
+ printk(KERN_NOTICE "%ldMB memory available.\n",
+ pages_to_mb(node_end_pfn[0]));
+ }
+ for (i = 1; i < MAX_NUMNODES; ++i) {
+ node_start_pfn[i] = 0;
+ node_end_pfn[i] = 0;
+ }
+ high_memory = __va(node_end_pfn[0]);
+#else
+ lowmem_pages = 0;
+ for (i = 0; i < MAX_NUMNODES; ++i) {
+ int pages = node_end_pfn[i] - node_start_pfn[i];
+ lowmem_pages += pages;
+ if (pages)
+ high_memory = pfn_to_kaddr(node_end_pfn[i]);
+ }
+ printk(KERN_NOTICE "%ldMB memory available.\n",
+ pages_to_mb(lowmem_pages));
+#endif
+#endif
+}
+
+static void __init setup_bootmem_allocator(void)
+{
+ unsigned long bootmap_size, first_alloc_pfn, last_alloc_pfn;
+
+ /* Provide a node 0 bdata. */
+ NODE_DATA(0)->bdata = &node0_bdata;
+
+#ifdef CONFIG_PCI
+ /* Don't let boot memory alias the PCI region. */
+ last_alloc_pfn = min(max_low_pfn, pci_reserve_start_pfn);
+#else
+ last_alloc_pfn = max_low_pfn;
+#endif
+
+ /*
+ * Initialize the boot-time allocator (with low memory only):
+ * The first argument says where to put the bitmap, and the
+ * second says where the end of allocatable memory is.
+ */
+ bootmap_size = init_bootmem(min_low_pfn, last_alloc_pfn);
+
+ /*
+ * Let the bootmem allocator use all the space we've given it
+ * except for its own bitmap.
+ */
+ first_alloc_pfn = min_low_pfn + PFN_UP(bootmap_size);
+ if (first_alloc_pfn >= last_alloc_pfn)
+ early_panic("Not enough memory on controller 0 for bootmem\n");
+
+ free_bootmem(PFN_PHYS(first_alloc_pfn),
+ PFN_PHYS(last_alloc_pfn - first_alloc_pfn));
+
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1, 0);
+#endif
+
+}
+
+void *__init alloc_remap(int nid, unsigned long size)
+{
+ int pages = node_end_pfn[nid] - node_start_pfn[nid];
+ void *map = pfn_to_kaddr(node_memmap_pfn[nid]);
+ BUG_ON(size != pages * sizeof(struct page));
+ memset(map, 0, size);
+ return map;
+}
+
+static int __init percpu_size(void)
+{
+ int size = ALIGN(__per_cpu_end - __per_cpu_start, PAGE_SIZE);
+#ifdef CONFIG_MODULES
+ if (size < PERCPU_ENOUGH_ROOM)
+ size = PERCPU_ENOUGH_ROOM;
+#endif
+ /* In several places we assume the per-cpu data fits on a huge page. */
+ BUG_ON(kdata_huge && size > HPAGE_SIZE);
+ return size;
+}
+
+static inline unsigned long alloc_bootmem_pfn(int size, unsigned long goal)
+{
+ void *kva = __alloc_bootmem(size, PAGE_SIZE, goal);
+ unsigned long pfn = kaddr_to_pfn(kva);
+ BUG_ON(goal && PFN_PHYS(pfn) != goal);
+ return pfn;
+}
+
+static void __init zone_sizes_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES] = { 0 };
+ unsigned long node_percpu[MAX_NUMNODES] = { 0 };
+ int size = percpu_size();
+ int num_cpus = smp_height * smp_width;
+ int i;
+
+ for (i = 0; i < num_cpus; ++i)
+ node_percpu[cpu_to_node(i)] += size;
+
+ for_each_online_node(i) {
+ unsigned long start = node_start_pfn[i];
+ unsigned long end = node_end_pfn[i];
+#ifdef CONFIG_HIGHMEM
+ unsigned long lowmem_end = node_lowmem_end_pfn[i];
+#else
+ unsigned long lowmem_end = end;
+#endif
+ int memmap_size = (end - start) * sizeof(struct page);
+ node_free_pfn[i] = start;
+
+ /*
+ * Set aside pages for per-cpu data and the mem_map array.
+ *
+ * Since the per-cpu data requires special homecaching,
+ * if we are in kdata_huge mode, we put it at the end of
+ * the lowmem region. If we're not in kdata_huge mode,
+ * we take the per-cpu pages from the bottom of the
+ * controller, since that avoids fragmenting a huge page
+ * that users might want. We always take the memmap
+ * from the bottom of the controller, since with
+ * kdata_huge that lets it be under a huge TLB entry.
+ *
+ * If the user has requested isolnodes for a controller,
+ * though, there'll be no lowmem, so we just alloc_bootmem
+ * the memmap. There will be no percpu memory either.
+ */
+ if (__pfn_to_highbits(start) == 0) {
+ /* In low PAs, allocate via bootmem. */
+ unsigned long goal = 0;
+ node_memmap_pfn[i] =
+ alloc_bootmem_pfn(memmap_size, goal);
+ if (kdata_huge)
+ goal = PFN_PHYS(lowmem_end) - node_percpu[i];
+ if (node_percpu[i])
+ node_percpu_pfn[i] =
+ alloc_bootmem_pfn(node_percpu[i], goal);
+ } else if (cpu_isset(i, isolnodes)) {
+ node_memmap_pfn[i] = alloc_bootmem_pfn(memmap_size, 0);
+ BUG_ON(node_percpu[i] != 0);
+ } else {
+ /* In high PAs, just reserve some pages. */
+ node_memmap_pfn[i] = node_free_pfn[i];
+ node_free_pfn[i] += PFN_UP(memmap_size);
+ if (!kdata_huge) {
+ node_percpu_pfn[i] = node_free_pfn[i];
+ node_free_pfn[i] += PFN_UP(node_percpu[i]);
+ } else {
+ node_percpu_pfn[i] =
+ lowmem_end - PFN_UP(node_percpu[i]);
+ }
+ }
+
+#ifdef CONFIG_HIGHMEM
+ if (start > lowmem_end) {
+ zones_size[ZONE_NORMAL] = 0;
+ zones_size[ZONE_HIGHMEM] = end - start;
+ } else {
+ zones_size[ZONE_NORMAL] = lowmem_end - start;
+ zones_size[ZONE_HIGHMEM] = end - lowmem_end;
+ }
+#else
+ zones_size[ZONE_NORMAL] = end - start;
+#endif
+
+ /*
+ * Everyone shares node 0's bootmem allocator, but
+ * we use alloc_remap(), above, to put the actual
+ * struct page array on the individual controllers,
+ * which is most of the data that we actually care about.
+ * We can't place bootmem allocators on the other
+ * controllers since the bootmem allocator can only
+ * operate on 32-bit physical addresses.
+ */
+ NODE_DATA(i)->bdata = NODE_DATA(0)->bdata;
+
+ free_area_init_node(i, zones_size, start, NULL);
+ printk(KERN_DEBUG " DMA zone: %ld per-cpu pages\n",
+ PFN_UP(node_percpu[i]));
+
+ /* Track the type of memory on each node */
+ if (zones_size[ZONE_NORMAL])
+ node_set_state(i, N_NORMAL_MEMORY);
+#ifdef CONFIG_HIGHMEM
+ if (end != start)
+ node_set_state(i, N_HIGH_MEMORY);
+#endif
+
+ node_set_online(i);
+ }
+}
+
+#ifdef CONFIG_NUMA
+
+/* which logical CPUs are on which nodes */
+struct cpumask node_2_cpu_mask[MAX_NUMNODES] __write_once;
+EXPORT_SYMBOL(node_2_cpu_mask);
+
+/* which node each logical CPU is on */
+char cpu_2_node[NR_CPUS] __write_once __attribute__((aligned(L2_CACHE_BYTES)));
+EXPORT_SYMBOL(cpu_2_node);
+
+/* Return cpu_to_node() except for cpus not yet assigned, which return -1 */
+static int __init cpu_to_bound_node(int cpu, struct cpumask* unbound_cpus)
+{
+ if (!cpu_possible(cpu) || cpumask_test_cpu(cpu, unbound_cpus))
+ return -1;
+ else
+ return cpu_to_node(cpu);
+}
+
+/* Return number of immediately-adjacent tiles sharing the same NUMA node. */
+static int __init node_neighbors(int node, int cpu,
+ struct cpumask *unbound_cpus)
+{
+ int neighbors = 0;
+ int w = smp_width;
+ int h = smp_height;
+ int x = cpu % w;
+ int y = cpu / w;
+ if (x > 0 && cpu_to_bound_node(cpu-1, unbound_cpus) == node)
+ ++neighbors;
+ if (x < w-1 && cpu_to_bound_node(cpu+1, unbound_cpus) == node)
+ ++neighbors;
+ if (y > 0 && cpu_to_bound_node(cpu-w, unbound_cpus) == node)
+ ++neighbors;
+ if (y < h-1 && cpu_to_bound_node(cpu+w, unbound_cpus) == node)
+ ++neighbors;
+ return neighbors;
+}
+
+static void __init setup_numa_mapping(void)
+{
+ int distance[MAX_NUMNODES][NR_CPUS];
+ HV_Coord coord;
+ int cpu, node, cpus, i, x, y;
+ int num_nodes = num_online_nodes();
+ struct cpumask unbound_cpus;
+ nodemask_t default_nodes;
+
+ cpumask_clear(&unbound_cpus);
+
+ /* Get set of nodes we will use for defaults */
+ nodes_andnot(default_nodes, node_online_map, isolnodes);
+ if (nodes_empty(default_nodes)) {
+ BUG_ON(!node_isset(0, node_online_map));
+ printk("Forcing NUMA node zero available as a default node\n");
+ node_set(0, default_nodes);
+ }
+
+ /* Populate the distance[] array */
+ memset(distance, -1, sizeof(distance));
+ cpu = 0;
+ for (coord.y = 0; coord.y < smp_height; ++coord.y) {
+ for (coord.x = 0; coord.x < smp_width;
+ ++coord.x, ++cpu) {
+ BUG_ON(cpu >= nr_cpu_ids);
+ if (!cpu_possible(cpu)) {
+ cpu_2_node[cpu] = -1;
+ continue;
+ }
+ for_each_node_mask(node, default_nodes) {
+ HV_MemoryControllerInfo info =
+ hv_inquire_memory_controller(
+ coord, node_controller[node]);
+ distance[node][cpu] =
+ ABS(info.coord.x) + ABS(info.coord.y);
+ }
+ cpumask_set_cpu(cpu, &unbound_cpus);
+ }
+ }
+ cpus = cpu;
+
+ /*
+ * Round-robin through the NUMA nodes until all the cpus are
+ * assigned. We could be more clever here (e.g. create four
+ * sorted linked lists on the same set of cpu nodes, and pull
+ * off them in round-robin sequence, removing from all four
+ * lists each time) but given the relatively small numbers
+ * involved, O(n^2) seem OK for a one-time cost.
+ */
+ node = first_node(default_nodes);
+ while (!cpumask_empty(&unbound_cpus)) {
+ int best_cpu = -1;
+ int best_distance = INT_MAX;
+ for (cpu = 0; cpu < cpus; ++cpu) {
+ if (cpumask_test_cpu(cpu, &unbound_cpus)) {
+ /*
+ * Compute metric, which is how much
+ * closer the cpu is to this memory
+ * controller than the others, shifted
+ * up, and then the number of
+ * neighbors already in the node as an
+ * epsilon adjustment to try to keep
+ * the nodes compact.
+ */
+ int d = distance[node][cpu] * num_nodes;
+ for_each_node_mask(i, default_nodes) {
+ if (i != node)
+ d -= distance[i][cpu];
+ }
+ d *= 8; /* allow space for epsilon */
+ d -= node_neighbors(node, cpu, &unbound_cpus);
+ if (d < best_distance) {
+ best_cpu = cpu;
+ best_distance = d;
+ }
+ }
+ }
+ BUG_ON(best_cpu < 0);
+ cpumask_set_cpu(best_cpu, &node_2_cpu_mask[node]);
+ cpu_2_node[best_cpu] = node;
+ cpumask_clear_cpu(best_cpu, &unbound_cpus);
+ node = next_node(node, default_nodes);
+ if (node == MAX_NUMNODES)
+ node = first_node(default_nodes);
+ }
+
+ /* Print out node assignments and set defaults for disabled cpus */
+ cpu = 0;
+ for (y = 0; y < smp_height; ++y) {
+ printk(KERN_DEBUG "NUMA cpu-to-node row %d:", y);
+ for (x = 0; x < smp_width; ++x, ++cpu) {
+ if (cpu_to_node(cpu) < 0) {
+ printk(" -");
+ cpu_2_node[cpu] = first_node(default_nodes);
+ } else {
+ printk(" %d", cpu_to_node(cpu));
+ }
+ }
+ printk("\n");
+ }
+}
+
+static struct cpu cpu_devices[NR_CPUS];
+
+static int __init topology_init(void)
+{
+ int i;
+
+ for_each_online_node(i)
+ register_one_node(i);
+
+ for_each_present_cpu(i)
+ register_cpu(&cpu_devices[i], i);
+
+ return 0;
+}
+
+subsys_initcall(topology_init);
+
+#else /* !CONFIG_NUMA */
+
+#define setup_numa_mapping() do { } while (0)
+
+#endif /* CONFIG_NUMA */
+
+/**
+ * setup_mpls() - Allow the user-space code to access various SPRs.
+ *
+ * Also called from online_secondary().
+ */
+void __cpuinit setup_mpls(void)
+{
+ /* Allow asynchronous TLB interrupts. */
+#if CHIP_HAS_TILE_DMA()
+ raw_local_irq_unmask(INT_DMATLB_MISS);
+ raw_local_irq_unmask(INT_DMATLB_ACCESS);
+#endif
+#if CHIP_HAS_SN_PROC()
+ raw_local_irq_unmask(INT_SNITLB_MISS);
+#endif
+
+ /*
+ * Allow user access to many generic SPRs, like the cycle
+ * counter, PASS/FAIL/DONE, INTERRUPT_CRITICAL_SECTION, etc.
+ */
+ __insn_mtspr(SPR_MPL_WORLD_ACCESS_SET_0, 1);
+
+#if CHIP_HAS_SN()
+ /* Static network is not restricted. */
+ __insn_mtspr(SPR_MPL_SN_ACCESS_SET_0, 1);
+#endif
+#if CHIP_HAS_SN_PROC()
+ __insn_mtspr(SPR_MPL_SN_NOTIFY_SET_0, 1);
+ __insn_mtspr(SPR_MPL_SN_CPL_SET_0, 1);
+#endif
+
+ /*
+ * Set the MPL for interrupt control 0 to user level.
+ * This includes access to the SYSTEM_SAVE and EX_CONTEXT SPRs,
+ * as well as the PL 0 interrupt mask.
+ */
+ __insn_mtspr(SPR_MPL_INTCTRL_0_SET_0, 1);
+}
+
+static int __initdata set_initramfs_file;
+static char __initdata initramfs_file[128] = "initramfs.cpio.gz";
+
+static int __init setup_initramfs_file(char *str)
+{
+ if (str == NULL)
+ return -EINVAL;
+ strncpy(initramfs_file, str, sizeof(initramfs_file) - 1);
+ set_initramfs_file = 1;
+
+ return 0;
+}
+early_param("initramfs_file", setup_initramfs_file);
+
+/*
+ * We look for an additional "initramfs.cpio.gz" file in the hvfs.
+ * If there is one, we allocate some memory for it and it will be
+ * unpacked to the initramfs after any built-in initramfs_data.
+ */
+static void __init load_hv_initrd(void)
+{
+ HV_FS_StatInfo stat;
+ int fd, rc;
+ void *initrd;
+
+ fd = hv_fs_findfile((HV_VirtAddr) initramfs_file);
+ if (fd == HV_ENOENT) {
+ if (set_initramfs_file)
+ printk("No such hvfs initramfs file '%s'\n",
+ initramfs_file);
+ return;
+ }
+ BUG_ON(fd < 0);
+ stat = hv_fs_fstat(fd);
+ BUG_ON(stat.size < 0);
+ if (stat.flags & HV_FS_ISDIR) {
+ printk("Ignoring hvfs file '%s': it's a directory.\n",
+ initramfs_file);
+ return;
+ }
+ initrd = alloc_bootmem_pages(stat.size);
+ rc = hv_fs_pread(fd, (HV_VirtAddr) initrd, stat.size, 0);
+ if (rc != stat.size) {
+ printk("Error reading %d bytes from hvfs file '%s': %d\n",
+ stat.size, initramfs_file, rc);
+ free_bootmem((unsigned long) initrd, stat.size);
+ return;
+ }
+ initrd_start = (unsigned long) initrd;
+ initrd_end = initrd_start + stat.size;
+}
+
+void __init free_initrd_mem(unsigned long begin, unsigned long end)
+{
+ free_bootmem(begin, end - begin);
+}
+
+static void __init validate_hv(void)
+{
+ /*
+ * It may already be too late, but let's check our built-in
+ * configuration against what the hypervisor is providing.
+ */
+ unsigned long glue_size = hv_sysconf(HV_SYSCONF_GLUE_SIZE);
+ int hv_page_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL);
+ int hv_hpage_size = hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE);
+ HV_ASIDRange asid_range;
+
+#ifndef CONFIG_SMP
+ HV_Topology topology = hv_inquire_topology();
+ BUG_ON(topology.coord.x != 0 || topology.coord.y != 0);
+ if (topology.width != 1 || topology.height != 1) {
+ printk("Warning: booting UP kernel on %dx%d grid;"
+ " will ignore all but first tile.\n",
+ topology.width, topology.height);
+ }
+#endif
+
+ if (PAGE_OFFSET + HV_GLUE_START_CPA + glue_size > (unsigned long)_text)
+ early_panic("Hypervisor glue size %ld is too big!\n",
+ glue_size);
+ if (hv_page_size != PAGE_SIZE)
+ early_panic("Hypervisor page size %#x != our %#lx\n",
+ hv_page_size, PAGE_SIZE);
+ if (hv_hpage_size != HPAGE_SIZE)
+ early_panic("Hypervisor huge page size %#x != our %#lx\n",
+ hv_hpage_size, HPAGE_SIZE);
+
+#ifdef CONFIG_SMP
+ /*
+ * Some hypervisor APIs take a pointer to a bitmap array
+ * whose size is at least the number of cpus on the chip.
+ * We use a struct cpumask for this, so it must be big enough.
+ */
+ if ((smp_height * smp_width) > nr_cpu_ids)
+ early_panic("Hypervisor %d x %d grid too big for Linux"
+ " NR_CPUS %d\n", smp_height, smp_width,
+ nr_cpu_ids);
+#endif
+
+ /*
+ * Check that we're using allowed ASIDs, and initialize the
+ * various asid variables to their appropriate initial states.
+ */
+ asid_range = hv_inquire_asid(0);
+ __get_cpu_var(current_asid) = min_asid = asid_range.start;
+ max_asid = asid_range.start + asid_range.size - 1;
+
+ if (hv_confstr(HV_CONFSTR_CHIP_MODEL, (HV_VirtAddr)chip_model,
+ sizeof(chip_model)) < 0) {
+ printk("Warning: HV_CONFSTR_CHIP_MODEL not available\n");
+ strlcpy(chip_model, "unknown", sizeof(chip_model));
+ }
+}
+
+static void __init validate_va(void)
+{
+#ifndef __tilegx__ /* FIXME: GX: probably some validation relevant here */
+ /*
+ * Similarly, make sure we're only using allowed VAs.
+ * We assume we can contiguously use MEM_USER_INTRPT .. MEM_HV_INTRPT,
+ * and 0 .. KERNEL_HIGH_VADDR.
+ * In addition, make sure we CAN'T use the end of memory, since
+ * we use the last chunk of each pgd for the pgd_list.
+ */
+ int i, fc_fd_ok = 0;
+ unsigned long max_va = 0;
+ unsigned long list_va =
+ ((PGD_LIST_OFFSET / sizeof(pgd_t)) << PGDIR_SHIFT);
+
+ for (i = 0; ; ++i) {
+ HV_VirtAddrRange range = hv_inquire_virtual(i);
+ if (range.size == 0)
+ break;
+ if (range.start <= MEM_USER_INTRPT &&
+ range.start + range.size >= MEM_HV_INTRPT)
+ fc_fd_ok = 1;
+ if (range.start == 0)
+ max_va = range.size;
+ BUG_ON(range.start + range.size > list_va);
+ }
+ if (!fc_fd_ok)
+ early_panic("Hypervisor not configured for VAs 0xfc/0xfd\n");
+ if (max_va == 0)
+ early_panic("Hypervisor not configured for low VAs\n");
+ if (max_va < KERNEL_HIGH_VADDR)
+ early_panic("Hypervisor max VA %#lx smaller than %#lx\n",
+ max_va, KERNEL_HIGH_VADDR);
+
+ /* Kernel PCs must have their high bit set; see intvec.S. */
+ if ((long)VMALLOC_START >= 0)
+ early_panic(
+ "Linux VMALLOC region below the 2GB line (%#lx)!\n"
+ "Reconfigure the kernel with fewer NR_HUGE_VMAPS\n"
+ "or smaller VMALLOC_RESERVE.\n",
+ VMALLOC_START);
+#endif
+}
+
+/*
+ * cpu_lotar_map lists all the cpus that are valid for the supervisor
+ * to cache data on at a page level, i.e. what cpus can be placed in
+ * the LOTAR field of a PTE. It is equivalent to the set of possible
+ * cpus plus any other cpus that are willing to share their cache.
+ * It is set by hv_inquire_tiles(HV_INQ_TILES_LOTAR).
+ */
+struct cpumask __write_once cpu_lotar_map;
+EXPORT_SYMBOL(cpu_lotar_map);
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+/*
+ * hash_for_home_map lists all the tiles that hash-for-home data
+ * will be cached on. Note that this may includes tiles that are not
+ * valid for this supervisor to use otherwise (e.g. if a hypervisor
+ * device is being shared between multiple supervisors).
+ * It is set by hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE).
+ */
+struct cpumask hash_for_home_map;
+EXPORT_SYMBOL(hash_for_home_map);
+#endif
+
+/*
+ * cpu_cacheable_map lists all the cpus whose caches the hypervisor can
+ * flush on our behalf. It is set to cpu_possible_map OR'ed with
+ * hash_for_home_map, and it is what should be passed to
+ * hv_flush_remote() to flush all caches. Note that if there are
+ * dedicated hypervisor driver tiles that have authorized use of their
+ * cache, those tiles will only appear in cpu_lotar_map, NOT in
+ * cpu_cacheable_map, as they are a special case.
+ */
+struct cpumask __write_once cpu_cacheable_map;
+EXPORT_SYMBOL(cpu_cacheable_map);
+
+static __initdata struct cpumask disabled_map;
+
+static int __init disabled_cpus(char *str)
+{
+ int boot_cpu = smp_processor_id();
+
+ if (str == NULL || cpulist_parse_crop(str, &disabled_map) != 0)
+ return -EINVAL;
+ if (cpumask_test_cpu(boot_cpu, &disabled_map)) {
+ printk("disabled_cpus: can't disable boot cpu %d\n", boot_cpu);
+ cpumask_clear_cpu(boot_cpu, &disabled_map);
+ }
+ return 0;
+}
+
+early_param("disabled_cpus", disabled_cpus);
+
+void __init print_disabled_cpus()
+{
+ if (!cpumask_empty(&disabled_map)) {
+ char buf[100];
+ cpulist_scnprintf(buf, sizeof(buf), &disabled_map);
+ printk(KERN_INFO "CPUs not available for Linux: %s\n", buf);
+ }
+}
+
+static void __init setup_cpu_maps(void)
+{
+ struct cpumask hv_disabled_map, cpu_possible_init;
+ int boot_cpu = smp_processor_id();
+ int cpus, i, rc;
+
+ /* Learn which cpus are allowed by the hypervisor. */
+ rc = hv_inquire_tiles(HV_INQ_TILES_AVAIL,
+ (HV_VirtAddr) cpumask_bits(&cpu_possible_init),
+ sizeof(cpu_cacheable_map));
+ if (rc < 0)
+ early_panic("hv_inquire_tiles(AVAIL) failed: rc %d\n", rc);
+ if (!cpumask_test_cpu(boot_cpu, &cpu_possible_init))
+ early_panic("Boot CPU %d disabled by hypervisor!\n", boot_cpu);
+
+ /* Compute the cpus disabled by the hvconfig file. */
+ cpumask_complement(&hv_disabled_map, &cpu_possible_init);
+
+ /* Include them with the cpus disabled by "disabled_cpus". */
+ cpumask_or(&disabled_map, &disabled_map, &hv_disabled_map);
+
+ /*
+ * Disable every cpu after "setup_max_cpus". But don't mark
+ * as disabled the cpus that are outside of our initial rectangle,
+ * since that turns out to be confusing.
+ */
+ cpus = 1; /* this cpu */
+ cpumask_set_cpu(boot_cpu, &disabled_map); /* ignore this cpu */
+ for (i = 0; cpus < setup_max_cpus; ++i)
+ if (!cpumask_test_cpu(i, &disabled_map))
+ ++cpus;
+ for (; i < smp_height * smp_width; ++i)
+ cpumask_set_cpu(i, &disabled_map);
+ cpumask_clear_cpu(boot_cpu, &disabled_map); /* reset this cpu */
+ for (i = smp_height * smp_width; i < NR_CPUS; ++i)
+ cpumask_clear_cpu(i, &disabled_map);
+
+ /*
+ * Setup cpu_possible map as every cpu allocated to us, minus
+ * the results of any "disabled_cpus" settings.
+ */
+ cpumask_andnot(&cpu_possible_init, &cpu_possible_init, &disabled_map);
+ init_cpu_possible(&cpu_possible_init);
+
+ /* Learn which cpus are valid for LOTAR caching. */
+ rc = hv_inquire_tiles(HV_INQ_TILES_LOTAR,
+ (HV_VirtAddr) cpumask_bits(&cpu_lotar_map),
+ sizeof(cpu_lotar_map));
+ if (rc < 0) {
+ printk("warning: no HV_INQ_TILES_LOTAR; using AVAIL\n");
+ cpu_lotar_map = cpu_possible_map;
+ }
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ /* Retrieve set of CPUs used for hash-for-home caching */
+ rc = hv_inquire_tiles(HV_INQ_TILES_HFH_CACHE,
+ (HV_VirtAddr) hash_for_home_map.bits,
+ sizeof(hash_for_home_map));
+ if (rc < 0)
+ early_panic("hv_inquire_tiles(HFH_CACHE) failed: rc %d\n", rc);
+ cpumask_or(&cpu_cacheable_map, &cpu_possible_map, &hash_for_home_map);
+#else
+ cpu_cacheable_map = cpu_possible_map;
+#endif
+}
+
+
+static int __init dataplane(char *str)
+{
+ printk("WARNING: dataplane support disabled in this kernel\n");
+ return 0;
+}
+
+early_param("dataplane", dataplane);
+
+#ifdef CONFIG_CMDLINE_BOOL
+static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
+#endif
+
+void __init setup_arch(char **cmdline_p)
+{
+ int len;
+
+#if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE)
+ len = hv_get_command_line((HV_VirtAddr) boot_command_line,
+ COMMAND_LINE_SIZE);
+ if (boot_command_line[0])
+ printk("WARNING: ignoring dynamic command line \"%s\"\n",
+ boot_command_line);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ char *hv_cmdline;
+#if defined(CONFIG_CMDLINE_BOOL)
+ if (builtin_cmdline[0]) {
+ int builtin_len = strlcpy(boot_command_line, builtin_cmdline,
+ COMMAND_LINE_SIZE);
+ if (builtin_len < COMMAND_LINE_SIZE-1)
+ boot_command_line[builtin_len++] = ' ';
+ hv_cmdline = &boot_command_line[builtin_len];
+ len = COMMAND_LINE_SIZE - builtin_len;
+ } else
+#endif
+ {
+ hv_cmdline = boot_command_line;
+ len = COMMAND_LINE_SIZE;
+ }
+ len = hv_get_command_line((HV_VirtAddr) hv_cmdline, len);
+ if (len < 0 || len > COMMAND_LINE_SIZE)
+ early_panic("hv_get_command_line failed: %d\n", len);
+#endif
+
+ *cmdline_p = boot_command_line;
+
+ /* Set disabled_map and setup_max_cpus very early */
+ parse_early_param();
+
+ /* Make sure the kernel is compatible with the hypervisor. */
+ validate_hv();
+ validate_va();
+
+ setup_cpu_maps();
+
+
+#ifdef CONFIG_PCI
+ /*
+ * Initialize the PCI structures. This is done before memory
+ * setup so that we know whether or not a pci_reserve region
+ * is necessary.
+ */
+ if (tile_pci_init() == 0)
+ pci_reserve_mb = 0;
+
+ /* PCI systems reserve a region just below 4GB for mapping iomem. */
+ pci_reserve_end_pfn = (1 << (32 - PAGE_SHIFT));
+ pci_reserve_start_pfn = pci_reserve_end_pfn -
+ (pci_reserve_mb << (20 - PAGE_SHIFT));
+#endif
+
+ init_mm.start_code = (unsigned long) _text;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+
+ setup_memory();
+ store_permanent_mappings();
+ setup_bootmem_allocator();
+
+ /*
+ * NOTE: before this point _nobody_ is allowed to allocate
+ * any memory using the bootmem allocator.
+ */
+
+ paging_init();
+ setup_numa_mapping();
+ zone_sizes_init();
+ set_page_homes();
+ setup_mpls();
+ setup_clock();
+ load_hv_initrd();
+}
+
+
+/*
+ * Set up per-cpu memory.
+ */
+
+unsigned long __per_cpu_offset[NR_CPUS] __write_once;
+EXPORT_SYMBOL(__per_cpu_offset);
+
+static size_t __initdata pfn_offset[MAX_NUMNODES] = { 0 };
+static unsigned long __initdata percpu_pfn[NR_CPUS] = { 0 };
+
+/*
+ * As the percpu code allocates pages, we return the pages from the
+ * end of the node for the specified cpu.
+ */
+static void *__init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
+{
+ int nid = cpu_to_node(cpu);
+ unsigned long pfn = node_percpu_pfn[nid] + pfn_offset[nid];
+
+ BUG_ON(size % PAGE_SIZE != 0);
+ pfn_offset[nid] += size / PAGE_SIZE;
+ if (percpu_pfn[cpu] == 0)
+ percpu_pfn[cpu] = pfn;
+ return pfn_to_kaddr(pfn);
+}
+
+/*
+ * Pages reserved for percpu memory are not freeable, and in any case we are
+ * on a short path to panic() in setup_per_cpu_area() at this point anyway.
+ */
+static void __init pcpu_fc_free(void *ptr, size_t size)
+{
+}
+
+/*
+ * Set up vmalloc page tables using bootmem for the percpu code.
+ */
+static void __init pcpu_fc_populate_pte(unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ BUG_ON(pgd_addr_invalid(addr));
+
+ pgd = swapper_pg_dir + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+ BUG_ON(!pud_present(*pud));
+ pmd = pmd_offset(pud, addr);
+ if (pmd_present(*pmd)) {
+ BUG_ON(pmd_huge_page(*pmd));
+ } else {
+ pte = __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE,
+ HV_PAGE_TABLE_ALIGN, 0);
+ pmd_populate_kernel(&init_mm, pmd, pte);
+ }
+}
+
+void __init setup_per_cpu_areas(void)
+{
+ struct page *pg;
+ unsigned long delta, pfn, lowmem_va;
+ unsigned long size = percpu_size();
+ char *ptr;
+ int rc, cpu, i;
+
+ rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE, pcpu_fc_alloc,
+ pcpu_fc_free, pcpu_fc_populate_pte);
+ if (rc < 0)
+ panic("Cannot initialize percpu area (err=%d)", rc);
+
+ delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
+ for_each_possible_cpu(cpu) {
+ __per_cpu_offset[cpu] = delta + pcpu_unit_offsets[cpu];
+
+ /* finv the copy out of cache so we can change homecache */
+ ptr = pcpu_base_addr + pcpu_unit_offsets[cpu];
+ __finv_buffer(ptr, size);
+ pfn = percpu_pfn[cpu];
+
+ /* Rewrite the page tables to cache on that cpu */
+ pg = pfn_to_page(pfn);
+ for (i = 0; i < size; i += PAGE_SIZE, ++pfn, ++pg) {
+
+ /* Update the vmalloc mapping and page home. */
+ pte_t *ptep =
+ virt_to_pte(NULL, (unsigned long)ptr + i);
+ pte_t pte = *ptep;
+ BUG_ON(pfn != pte_pfn(pte));
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
+ pte = set_remote_cache_cpu(pte, cpu);
+ set_pte(ptep, pte);
+
+ /* Update the lowmem mapping for consistency. */
+ lowmem_va = (unsigned long)pfn_to_kaddr(pfn);
+ ptep = virt_to_pte(NULL, lowmem_va);
+ if (pte_huge(*ptep)) {
+ printk(KERN_DEBUG "early shatter of huge page"
+ " at %#lx\n", lowmem_va);
+ shatter_pmd((pmd_t *)ptep);
+ ptep = virt_to_pte(NULL, lowmem_va);
+ BUG_ON(pte_huge(*ptep));
+ }
+ BUG_ON(pfn != pte_pfn(*ptep));
+ set_pte(ptep, pte);
+ }
+ }
+
+ /* Set our thread pointer appropriately. */
+ set_my_cpu_offset(__per_cpu_offset[smp_processor_id()]);
+
+ /* Make sure the finv's have completed. */
+ mb_incoherent();
+
+ /* Flush the TLB so we reference it properly from here on out. */
+ local_flush_tlb_all();
+}
+
+static struct resource data_resource = {
+ .name = "Kernel data",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+static struct resource code_resource = {
+ .name = "Kernel code",
+ .start = 0,
+ .end = 0,
+ .flags = IORESOURCE_BUSY | IORESOURCE_MEM
+};
+
+/*
+ * We reserve all resources above 4GB so that PCI won't try to put
+ * mappings above 4GB; the standard allows that for some devices but
+ * the probing code trunates values to 32 bits.
+ */
+#ifdef CONFIG_PCI
+static struct resource* __init
+insert_non_bus_resource(void)
+{
+ struct resource *res =
+ kzalloc(sizeof(struct resource), GFP_ATOMIC);
+ res->name = "Non-Bus Physical Address Space";
+ res->start = (1ULL << 32);
+ res->end = -1LL;
+ res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+ if (insert_resource(&iomem_resource, res)) {
+ kfree(res);
+ return NULL;
+ }
+ return res;
+}
+#endif
+
+static struct resource* __init
+insert_ram_resource(u64 start_pfn, u64 end_pfn)
+{
+ struct resource *res =
+ kzalloc(sizeof(struct resource), GFP_ATOMIC);
+ res->name = "System RAM";
+ res->start = start_pfn << PAGE_SHIFT;
+ res->end = (end_pfn << PAGE_SHIFT) - 1;
+ res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+ if (insert_resource(&iomem_resource, res)) {
+ kfree(res);
+ return NULL;
+ }
+ return res;
+}
+
+/*
+ * Request address space for all standard resources
+ *
+ * If the system includes PCI root complex drivers, we need to create
+ * a window just below 4GB where PCI BARs can be mapped.
+ */
+static int __init request_standard_resources(void)
+{
+ int i;
+ enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+
+ iomem_resource.end = -1LL;
+#ifdef CONFIG_PCI
+ insert_non_bus_resource();
+#endif
+
+ for_each_online_node(i) {
+ u64 start_pfn = node_start_pfn[i];
+ u64 end_pfn = node_end_pfn[i];
+
+#ifdef CONFIG_PCI
+ if (start_pfn <= pci_reserve_start_pfn &&
+ end_pfn > pci_reserve_start_pfn) {
+ if (end_pfn > pci_reserve_end_pfn)
+ insert_ram_resource(pci_reserve_end_pfn,
+ end_pfn);
+ end_pfn = pci_reserve_start_pfn;
+ }
+#endif
+ insert_ram_resource(start_pfn, end_pfn);
+ }
+
+ code_resource.start = __pa(_text - CODE_DELTA);
+ code_resource.end = __pa(_etext - CODE_DELTA)-1;
+ data_resource.start = __pa(_sdata);
+ data_resource.end = __pa(_end)-1;
+
+ insert_resource(&iomem_resource, &code_resource);
+ insert_resource(&iomem_resource, &data_resource);
+
+#ifdef CONFIG_KEXEC
+ insert_resource(&iomem_resource, &crashk_res);
+#endif
+
+ return 0;
+}
+
+subsys_initcall(request_standard_resources);
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
new file mode 100644
index 000000000000..7ea85eb85242
--- /dev/null
+++ b/arch/tile/kernel/signal.c
@@ -0,0 +1,359 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/unistd.h>
+#include <linux/stddef.h>
+#include <linux/personality.h>
+#include <linux/suspend.h>
+#include <linux/ptrace.h>
+#include <linux/elf.h>
+#include <linux/compat.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <asm/processor.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <arch/interrupts.h>
+
+#define DEBUG_SIG 0
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+
+/* Caller before callee in this file; other callee is in assembler */
+void do_signal(struct pt_regs *regs);
+
+int _sys_sigaltstack(const stack_t __user *uss,
+ stack_t __user *uoss, struct pt_regs *regs)
+{
+ return do_sigaltstack(uss, uoss, regs->sp);
+}
+
+
+/*
+ * Do a signal return; undo the signal stack.
+ */
+
+int restore_sigcontext(struct pt_regs *regs,
+ struct sigcontext __user *sc, long *pr0)
+{
+ int err = 0;
+ int i;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
+ err |= __get_user(((long *)regs)[i],
+ &((long *)(&sc->regs))[i]);
+
+ regs->faultnum = INT_SWINT_1_SIGRETURN;
+
+ err |= __get_user(*pr0, &sc->regs.regs[0]);
+ return err;
+}
+
+int _sys_rt_sigreturn(struct pt_regs *regs)
+{
+ struct rt_sigframe __user *frame =
+ (struct rt_sigframe __user *)(regs->sp);
+ sigset_t set;
+ long r0;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ sigdelsetmask(&set, ~_BLOCKABLE);
+ spin_lock_irq(&current->sighand->siglock);
+ current->blocked = set;
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ goto badframe;
+
+ if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
+ goto badframe;
+
+ return r0;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+/*
+ * Set up a signal frame.
+ */
+
+int setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
+{
+ int i, err = 0;
+
+ for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i)
+ err |= __put_user(((long *)regs)[i],
+ &((long *)(&sc->regs))[i]);
+
+ return err;
+}
+
+/*
+ * Determine which stack to use..
+ */
+static inline void __user *get_sigframe(struct k_sigaction *ka,
+ struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long sp;
+
+ /* Default to using normal stack */
+ sp = regs->sp;
+
+ /*
+ * If we are on the alternate signal stack and would overflow
+ * it, don't. Return an always-bogus address instead so we
+ * will die with SIGSEGV.
+ */
+ if (on_sig_stack(sp) && !likely(on_sig_stack(sp - frame_size)))
+ return (void __user *) -1L;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ if (ka->sa.sa_flags & SA_ONSTACK) {
+ if (sas_ss_flags(sp) == 0)
+ sp = current->sas_ss_sp + current->sas_ss_size;
+ }
+
+ sp -= frame_size;
+ /*
+ * Align the stack pointer according to the TILE ABI,
+ * i.e. so that on function entry (sp & 15) == 0.
+ */
+ sp &= -16UL;
+ return (void __user *) sp;
+}
+
+static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
+ sigset_t *set, struct pt_regs *regs)
+{
+ unsigned long restorer;
+ struct rt_sigframe __user *frame;
+ int err = 0;
+ int usig;
+
+ frame = get_sigframe(ka, regs, sizeof(*frame));
+
+ if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
+ goto give_sigsegv;
+
+ usig = current_thread_info()->exec_domain
+ && current_thread_info()->exec_domain->signal_invmap
+ && sig < 32
+ ? current_thread_info()->exec_domain->signal_invmap[sig]
+ : sig;
+
+ /* Always write at least the signal number for the stack backtracer. */
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ /* At sigreturn time, restore the callee-save registers too. */
+ err |= copy_siginfo_to_user(&frame->info, info);
+ regs->flags |= PT_FLAGS_RESTORE_REGS;
+ } else {
+ err |= __put_user(info->si_signo, &frame->info.si_signo);
+ }
+
+ /* Create the ucontext. */
+ err |= __clear_user(&frame->save_area, sizeof(frame->save_area));
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __put_user((void *)(current->sas_ss_sp),
+ &frame->uc.uc_stack.ss_sp);
+ err |= __put_user(sas_ss_flags(regs->sp),
+ &frame->uc.uc_stack.ss_flags);
+ err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
+ err |= setup_sigcontext(&frame->uc.uc_mcontext, regs);
+ err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+ if (err)
+ goto give_sigsegv;
+
+ restorer = VDSO_BASE;
+ if (ka->sa.sa_flags & SA_RESTORER)
+ restorer = (unsigned long) ka->sa.sa_restorer;
+
+ /*
+ * Set up registers for signal handler.
+ * Registers that we don't modify keep the value they had from
+ * user-space at the time we took the signal.
+ */
+ regs->pc = (unsigned long) ka->sa.sa_handler;
+ regs->ex1 = PL_ICS_EX1(USER_PL, 1); /* set crit sec in handler */
+ regs->sp = (unsigned long) frame;
+ regs->lr = restorer;
+ regs->regs[0] = (unsigned long) usig;
+
+ if (ka->sa.sa_flags & SA_SIGINFO) {
+ /* Need extra arguments, so mark to restore caller-saves. */
+ regs->regs[1] = (unsigned long) &frame->info;
+ regs->regs[2] = (unsigned long) &frame->uc;
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+ }
+
+ /*
+ * Notify any tracer that was single-stepping it.
+ * The tracer may want to single-step inside the
+ * handler too.
+ */
+ if (test_thread_flag(TIF_SINGLESTEP))
+ ptrace_notify(SIGTRAP);
+
+ return 0;
+
+give_sigsegv:
+ force_sigsegv(sig, current);
+ return -EFAULT;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+
+static int handle_signal(unsigned long sig, siginfo_t *info,
+ struct k_sigaction *ka, sigset_t *oldset,
+ struct pt_regs *regs)
+{
+ int ret;
+
+
+ /* Are we from a system call? */
+ if (regs->faultnum == INT_SWINT_1) {
+ /* If so, check system call restarting.. */
+ switch (regs->regs[0]) {
+ case -ERESTART_RESTARTBLOCK:
+ case -ERESTARTNOHAND:
+ regs->regs[0] = -EINTR;
+ break;
+
+ case -ERESTARTSYS:
+ if (!(ka->sa.sa_flags & SA_RESTART)) {
+ regs->regs[0] = -EINTR;
+ break;
+ }
+ /* fallthrough */
+ case -ERESTARTNOINTR:
+ /* Reload caller-saves to restore r0..r5 and r10. */
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+ regs->regs[0] = regs->orig_r0;
+ regs->pc -= 8;
+ }
+ }
+
+ /* Set up the stack frame */
+#ifdef CONFIG_COMPAT
+ if (is_compat_task())
+ ret = compat_setup_rt_frame(sig, ka, info, oldset, regs);
+ else
+#endif
+ ret = setup_rt_frame(sig, ka, info, oldset, regs);
+ if (ret == 0) {
+ /* This code is only called from system calls or from
+ * the work_pending path in the return-to-user code, and
+ * either way we can re-enable interrupts unconditionally.
+ */
+ spin_lock_irq(&current->sighand->siglock);
+ sigorsets(&current->blocked,
+ &current->blocked, &ka->sa.sa_mask);
+ if (!(ka->sa.sa_flags & SA_NODEFER))
+ sigaddset(&current->blocked, sig);
+ recalc_sigpending();
+ spin_unlock_irq(&current->sighand->siglock);
+ }
+
+ return ret;
+}
+
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ */
+void do_signal(struct pt_regs *regs)
+{
+ siginfo_t info;
+ int signr;
+ struct k_sigaction ka;
+ sigset_t *oldset;
+
+ /*
+ * i386 will check if we're coming from kernel mode and bail out
+ * here. In my experience this just turns weird crashes into
+ * weird spin-hangs. But if we find a case where this seems
+ * helpful, we can reinstate the check on "!user_mode(regs)".
+ */
+
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
+ oldset = &current->saved_sigmask;
+ else
+ oldset = &current->blocked;
+
+ signr = get_signal_to_deliver(&info, &ka, regs, NULL);
+ if (signr > 0) {
+ /* Whee! Actually deliver the signal. */
+ if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
+ /*
+ * A signal was successfully delivered; the saved
+ * sigmask will have been stored in the signal frame,
+ * and will be restored by sigreturn, so we can simply
+ * clear the TS_RESTORE_SIGMASK flag.
+ */
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ }
+
+ return;
+ }
+
+ /* Did we come from a system call? */
+ if (regs->faultnum == INT_SWINT_1) {
+ /* Restart the system call - no handlers present */
+ switch (regs->regs[0]) {
+ case -ERESTARTNOHAND:
+ case -ERESTARTSYS:
+ case -ERESTARTNOINTR:
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+ regs->regs[0] = regs->orig_r0;
+ regs->pc -= 8;
+ break;
+
+ case -ERESTART_RESTARTBLOCK:
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+ regs->regs[TREG_SYSCALL_NR] = __NR_restart_syscall;
+ regs->pc -= 8;
+ break;
+ }
+ }
+
+ /* If there's no signal to deliver, just put the saved sigmask back. */
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+ sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+ }
+}
diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c
new file mode 100644
index 000000000000..266aae123632
--- /dev/null
+++ b/arch/tile/kernel/single_step.c
@@ -0,0 +1,656 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * A code-rewriter that enables instruction single-stepping.
+ * Derived from iLib's single-stepping code.
+ */
+
+#ifndef __tilegx__ /* No support for single-step yet. */
+
+/* These functions are only used on the TILE platform */
+#include <linux/slab.h>
+#include <linux/thread_info.h>
+#include <linux/uaccess.h>
+#include <linux/mman.h>
+#include <linux/types.h>
+#include <asm/cacheflush.h>
+#include <asm/opcode-tile.h>
+#include <asm/opcode_constants.h>
+#include <arch/abi.h>
+
+#define signExtend17(val) sign_extend((val), 17)
+#define TILE_X1_MASK (0xffffffffULL << 31)
+
+int unaligned_printk;
+
+static int __init setup_unaligned_printk(char *str)
+{
+ long val;
+ if (strict_strtol(str, 0, &val) != 0)
+ return 0;
+ unaligned_printk = val;
+ printk("Printk for each unaligned data accesses is %s\n",
+ unaligned_printk ? "enabled" : "disabled");
+ return 1;
+}
+__setup("unaligned_printk=", setup_unaligned_printk);
+
+unsigned int unaligned_fixup_count;
+
+enum mem_op {
+ MEMOP_NONE,
+ MEMOP_LOAD,
+ MEMOP_STORE,
+ MEMOP_LOAD_POSTINCR,
+ MEMOP_STORE_POSTINCR
+};
+
+static inline tile_bundle_bits set_BrOff_X1(tile_bundle_bits n, int32_t offset)
+{
+ tile_bundle_bits result;
+
+ /* mask out the old offset */
+ tile_bundle_bits mask = create_BrOff_X1(-1);
+ result = n & (~mask);
+
+ /* or in the new offset */
+ result |= create_BrOff_X1(offset);
+
+ return result;
+}
+
+static inline tile_bundle_bits move_X1(tile_bundle_bits n, int dest, int src)
+{
+ tile_bundle_bits result;
+ tile_bundle_bits op;
+
+ result = n & (~TILE_X1_MASK);
+
+ op = create_Opcode_X1(SPECIAL_0_OPCODE_X1) |
+ create_RRROpcodeExtension_X1(OR_SPECIAL_0_OPCODE_X1) |
+ create_Dest_X1(dest) |
+ create_SrcB_X1(TREG_ZERO) |
+ create_SrcA_X1(src) ;
+
+ result |= op;
+ return result;
+}
+
+static inline tile_bundle_bits nop_X1(tile_bundle_bits n)
+{
+ return move_X1(n, TREG_ZERO, TREG_ZERO);
+}
+
+static inline tile_bundle_bits addi_X1(
+ tile_bundle_bits n, int dest, int src, int imm)
+{
+ n &= ~TILE_X1_MASK;
+
+ n |= (create_SrcA_X1(src) |
+ create_Dest_X1(dest) |
+ create_Imm8_X1(imm) |
+ create_S_X1(0) |
+ create_Opcode_X1(IMM_0_OPCODE_X1) |
+ create_ImmOpcodeExtension_X1(ADDI_IMM_0_OPCODE_X1));
+
+ return n;
+}
+
+static tile_bundle_bits rewrite_load_store_unaligned(
+ struct single_step_state *state,
+ tile_bundle_bits bundle,
+ struct pt_regs *regs,
+ enum mem_op mem_op,
+ int size, int sign_ext)
+{
+ unsigned char *addr;
+ int val_reg, addr_reg, err, val;
+
+ /* Get address and value registers */
+ if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+ addr_reg = get_SrcA_Y2(bundle);
+ val_reg = get_SrcBDest_Y2(bundle);
+ } else if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
+ addr_reg = get_SrcA_X1(bundle);
+ val_reg = get_Dest_X1(bundle);
+ } else {
+ addr_reg = get_SrcA_X1(bundle);
+ val_reg = get_SrcB_X1(bundle);
+ }
+
+ /*
+ * If registers are not GPRs, don't try to handle it.
+ *
+ * FIXME: we could handle non-GPR loads by getting the real value
+ * from memory, writing it to the single step buffer, using a
+ * temp_reg to hold a pointer to that memory, then executing that
+ * instruction and resetting temp_reg. For non-GPR stores, it's a
+ * little trickier; we could use the single step buffer for that
+ * too, but we'd have to add some more state bits so that we could
+ * call back in here to copy that value to the real target. For
+ * now, we just handle the simple case.
+ */
+ if ((val_reg >= PTREGS_NR_GPRS &&
+ (val_reg != TREG_ZERO ||
+ mem_op == MEMOP_LOAD ||
+ mem_op == MEMOP_LOAD_POSTINCR)) ||
+ addr_reg >= PTREGS_NR_GPRS)
+ return bundle;
+
+ /* If it's aligned, don't handle it specially */
+ addr = (void *)regs->regs[addr_reg];
+ if (((unsigned long)addr % size) == 0)
+ return bundle;
+
+#ifndef __LITTLE_ENDIAN
+# error We assume little-endian representation with copy_xx_user size 2 here
+#endif
+ /* Handle unaligned load/store */
+ if (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) {
+ unsigned short val_16;
+ switch (size) {
+ case 2:
+ err = copy_from_user(&val_16, addr, sizeof(val_16));
+ val = sign_ext ? ((short)val_16) : val_16;
+ break;
+ case 4:
+ err = copy_from_user(&val, addr, sizeof(val));
+ break;
+ default:
+ BUG();
+ }
+ if (err == 0) {
+ state->update_reg = val_reg;
+ state->update_value = val;
+ state->update = 1;
+ }
+ } else {
+ val = (val_reg == TREG_ZERO) ? 0 : regs->regs[val_reg];
+ err = copy_to_user(addr, &val, size);
+ }
+
+ if (err) {
+ siginfo_t info = {
+ .si_signo = SIGSEGV,
+ .si_code = SEGV_MAPERR,
+ .si_addr = (void __user *)addr
+ };
+ force_sig_info(info.si_signo, &info, current);
+ return (tile_bundle_bits) 0;
+ }
+
+ if (unaligned_fixup == 0) {
+ siginfo_t info = {
+ .si_signo = SIGBUS,
+ .si_code = BUS_ADRALN,
+ .si_addr = (void __user *)addr
+ };
+ force_sig_info(info.si_signo, &info, current);
+ return (tile_bundle_bits) 0;
+ }
+
+ if (unaligned_printk || unaligned_fixup_count == 0) {
+ printk("Process %d/%s: PC %#lx: Fixup of"
+ " unaligned %s at %#lx.\n",
+ current->pid, current->comm, regs->pc,
+ (mem_op == MEMOP_LOAD || mem_op == MEMOP_LOAD_POSTINCR) ?
+ "load" : "store",
+ (unsigned long)addr);
+ if (!unaligned_printk) {
+ printk("\n"
+"Unaligned fixups in the kernel will slow your application considerably.\n"
+"You can find them by writing \"1\" to /proc/sys/tile/unaligned_fixup/printk,\n"
+"which requests the kernel show all unaligned fixups, or writing a \"0\"\n"
+"to /proc/sys/tile/unaligned_fixup/enabled, in which case each unaligned\n"
+"access will become a SIGBUS you can debug. No further warnings will be\n"
+"shown so as to avoid additional slowdown, but you can track the number\n"
+"of fixups performed via /proc/sys/tile/unaligned_fixup/count.\n"
+"Use the tile-addr2line command (see \"info addr2line\") to decode PCs.\n"
+ "\n");
+ }
+ }
+ ++unaligned_fixup_count;
+
+ if (bundle & TILE_BUNDLE_Y_ENCODING_MASK) {
+ /* Convert the Y2 instruction to a prefetch. */
+ bundle &= ~(create_SrcBDest_Y2(-1) |
+ create_Opcode_Y2(-1));
+ bundle |= (create_SrcBDest_Y2(TREG_ZERO) |
+ create_Opcode_Y2(LW_OPCODE_Y2));
+ /* Replace the load postincr with an addi */
+ } else if (mem_op == MEMOP_LOAD_POSTINCR) {
+ bundle = addi_X1(bundle, addr_reg, addr_reg,
+ get_Imm8_X1(bundle));
+ /* Replace the store postincr with an addi */
+ } else if (mem_op == MEMOP_STORE_POSTINCR) {
+ bundle = addi_X1(bundle, addr_reg, addr_reg,
+ get_Dest_Imm8_X1(bundle));
+ } else {
+ /* Convert the X1 instruction to a nop. */
+ bundle &= ~(create_Opcode_X1(-1) |
+ create_UnShOpcodeExtension_X1(-1) |
+ create_UnOpcodeExtension_X1(-1));
+ bundle |= (create_Opcode_X1(SHUN_0_OPCODE_X1) |
+ create_UnShOpcodeExtension_X1(
+ UN_0_SHUN_0_OPCODE_X1) |
+ create_UnOpcodeExtension_X1(
+ NOP_UN_0_SHUN_0_OPCODE_X1));
+ }
+
+ return bundle;
+}
+
+/**
+ * single_step_once() - entry point when single stepping has been triggered.
+ * @regs: The machine register state
+ *
+ * When we arrive at this routine via a trampoline, the single step
+ * engine copies the executing bundle to the single step buffer.
+ * If the instruction is a condition branch, then the target is
+ * reset to one past the next instruction. If the instruction
+ * sets the lr, then that is noted. If the instruction is a jump
+ * or call, then the new target pc is preserved and the current
+ * bundle instruction set to null.
+ *
+ * The necessary post-single-step rewriting information is stored in
+ * single_step_state-> We use data segment values because the
+ * stack will be rewound when we run the rewritten single-stepped
+ * instruction.
+ */
+void single_step_once(struct pt_regs *regs)
+{
+ extern tile_bundle_bits __single_step_ill_insn;
+ extern tile_bundle_bits __single_step_j_insn;
+ extern tile_bundle_bits __single_step_addli_insn;
+ extern tile_bundle_bits __single_step_auli_insn;
+ struct thread_info *info = (void *)current_thread_info();
+ struct single_step_state *state = info->step_state;
+ int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
+ tile_bundle_bits *buffer, *pc;
+ tile_bundle_bits bundle;
+ int temp_reg;
+ int target_reg = TREG_LR;
+ int err;
+ enum mem_op mem_op = MEMOP_NONE;
+ int size = 0, sign_ext = 0; /* happy compiler */
+
+ asm(
+" .pushsection .rodata.single_step\n"
+" .align 8\n"
+" .globl __single_step_ill_insn\n"
+"__single_step_ill_insn:\n"
+" ill\n"
+" .globl __single_step_addli_insn\n"
+"__single_step_addli_insn:\n"
+" { nop; addli r0, zero, 0 }\n"
+" .globl __single_step_auli_insn\n"
+"__single_step_auli_insn:\n"
+" { nop; auli r0, r0, 0 }\n"
+" .globl __single_step_j_insn\n"
+"__single_step_j_insn:\n"
+" j .\n"
+" .popsection\n"
+ );
+
+ if (state == NULL) {
+ /* allocate a page of writable, executable memory */
+ state = kmalloc(sizeof(struct single_step_state), GFP_KERNEL);
+ if (state == NULL) {
+ printk("Out of kernel memory trying to single-step\n");
+ return;
+ }
+
+ /* allocate a cache line of writable, executable memory */
+ down_write(&current->mm->mmap_sem);
+ buffer = (void *) do_mmap(0, 0, 64,
+ PROT_EXEC | PROT_READ | PROT_WRITE,
+ MAP_PRIVATE | MAP_ANONYMOUS,
+ 0);
+ up_write(&current->mm->mmap_sem);
+
+ if ((int)buffer < 0 && (int)buffer > -PAGE_SIZE) {
+ kfree(state);
+ printk("Out of kernel pages trying to single-step\n");
+ return;
+ }
+
+ state->buffer = buffer;
+ state->is_enabled = 0;
+
+ info->step_state = state;
+
+ /* Validate our stored instruction patterns */
+ BUG_ON(get_Opcode_X1(__single_step_addli_insn) !=
+ ADDLI_OPCODE_X1);
+ BUG_ON(get_Opcode_X1(__single_step_auli_insn) !=
+ AULI_OPCODE_X1);
+ BUG_ON(get_SrcA_X1(__single_step_addli_insn) != TREG_ZERO);
+ BUG_ON(get_Dest_X1(__single_step_addli_insn) != 0);
+ BUG_ON(get_JOffLong_X1(__single_step_j_insn) != 0);
+ }
+
+ /*
+ * If we are returning from a syscall, we still haven't hit the
+ * "ill" for the swint1 instruction. So back the PC up to be
+ * pointing at the swint1, but we'll actually return directly
+ * back to the "ill" so we come back in via SIGILL as if we
+ * had "executed" the swint1 without ever being in kernel space.
+ */
+ if (regs->faultnum == INT_SWINT_1)
+ regs->pc -= 8;
+
+ pc = (tile_bundle_bits *)(regs->pc);
+ bundle = pc[0];
+
+ /* We'll follow the instruction with 2 ill op bundles */
+ state->orig_pc = (unsigned long) pc;
+ state->next_pc = (unsigned long)(pc + 1);
+ state->branch_next_pc = 0;
+ state->update = 0;
+
+ if (!(bundle & TILE_BUNDLE_Y_ENCODING_MASK)) {
+ /* two wide, check for control flow */
+ int opcode = get_Opcode_X1(bundle);
+
+ switch (opcode) {
+ /* branches */
+ case BRANCH_OPCODE_X1:
+ {
+ int32_t offset = signExtend17(get_BrOff_X1(bundle));
+
+ /*
+ * For branches, we use a rewriting trick to let the
+ * hardware evaluate whether the branch is taken or
+ * untaken. We record the target offset and then
+ * rewrite the branch instruction to target 1 insn
+ * ahead if the branch is taken. We then follow the
+ * rewritten branch with two bundles, each containing
+ * an "ill" instruction. The supervisor examines the
+ * pc after the single step code is executed, and if
+ * the pc is the first ill instruction, then the
+ * branch (if any) was not taken. If the pc is the
+ * second ill instruction, then the branch was
+ * taken. The new pc is computed for these cases, and
+ * inserted into the registers for the thread. If
+ * the pc is the start of the single step code, then
+ * an exception or interrupt was taken before the
+ * code started processing, and the same "original"
+ * pc is restored. This change, different from the
+ * original implementation, has the advantage of
+ * executing a single user instruction.
+ */
+ state->branch_next_pc = (unsigned long)(pc + offset);
+
+ /* rewrite branch offset to go forward one bundle */
+ bundle = set_BrOff_X1(bundle, 2);
+ }
+ break;
+
+ /* jumps */
+ case JALB_OPCODE_X1:
+ case JALF_OPCODE_X1:
+ state->update = 1;
+ state->next_pc =
+ (unsigned long) (pc + get_JOffLong_X1(bundle));
+ break;
+
+ case JB_OPCODE_X1:
+ case JF_OPCODE_X1:
+ state->next_pc =
+ (unsigned long) (pc + get_JOffLong_X1(bundle));
+ bundle = nop_X1(bundle);
+ break;
+
+ case SPECIAL_0_OPCODE_X1:
+ switch (get_RRROpcodeExtension_X1(bundle)) {
+ /* jump-register */
+ case JALRP_SPECIAL_0_OPCODE_X1:
+ case JALR_SPECIAL_0_OPCODE_X1:
+ state->update = 1;
+ state->next_pc =
+ regs->regs[get_SrcA_X1(bundle)];
+ break;
+
+ case JRP_SPECIAL_0_OPCODE_X1:
+ case JR_SPECIAL_0_OPCODE_X1:
+ state->next_pc =
+ regs->regs[get_SrcA_X1(bundle)];
+ bundle = nop_X1(bundle);
+ break;
+
+ case LNK_SPECIAL_0_OPCODE_X1:
+ state->update = 1;
+ target_reg = get_Dest_X1(bundle);
+ break;
+
+ /* stores */
+ case SH_SPECIAL_0_OPCODE_X1:
+ mem_op = MEMOP_STORE;
+ size = 2;
+ break;
+
+ case SW_SPECIAL_0_OPCODE_X1:
+ mem_op = MEMOP_STORE;
+ size = 4;
+ break;
+ }
+ break;
+
+ /* loads and iret */
+ case SHUN_0_OPCODE_X1:
+ if (get_UnShOpcodeExtension_X1(bundle) ==
+ UN_0_SHUN_0_OPCODE_X1) {
+ switch (get_UnOpcodeExtension_X1(bundle)) {
+ case LH_UN_0_SHUN_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD;
+ size = 2;
+ sign_ext = 1;
+ break;
+
+ case LH_U_UN_0_SHUN_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD;
+ size = 2;
+ sign_ext = 0;
+ break;
+
+ case LW_UN_0_SHUN_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD;
+ size = 4;
+ break;
+
+ case IRET_UN_0_SHUN_0_OPCODE_X1:
+ {
+ unsigned long ex0_0 = __insn_mfspr(
+ SPR_EX_CONTEXT_0_0);
+ unsigned long ex0_1 = __insn_mfspr(
+ SPR_EX_CONTEXT_0_1);
+ /*
+ * Special-case it if we're iret'ing
+ * to PL0 again. Otherwise just let
+ * it run and it will generate SIGILL.
+ */
+ if (EX1_PL(ex0_1) == USER_PL) {
+ state->next_pc = ex0_0;
+ regs->ex1 = ex0_1;
+ bundle = nop_X1(bundle);
+ }
+ }
+ }
+ }
+ break;
+
+#if CHIP_HAS_WH64()
+ /* postincrement operations */
+ case IMM_0_OPCODE_X1:
+ switch (get_ImmOpcodeExtension_X1(bundle)) {
+ case LWADD_IMM_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD_POSTINCR;
+ size = 4;
+ break;
+
+ case LHADD_IMM_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD_POSTINCR;
+ size = 2;
+ sign_ext = 1;
+ break;
+
+ case LHADD_U_IMM_0_OPCODE_X1:
+ mem_op = MEMOP_LOAD_POSTINCR;
+ size = 2;
+ sign_ext = 0;
+ break;
+
+ case SWADD_IMM_0_OPCODE_X1:
+ mem_op = MEMOP_STORE_POSTINCR;
+ size = 4;
+ break;
+
+ case SHADD_IMM_0_OPCODE_X1:
+ mem_op = MEMOP_STORE_POSTINCR;
+ size = 2;
+ break;
+
+ default:
+ break;
+ }
+ break;
+#endif /* CHIP_HAS_WH64() */
+ }
+
+ if (state->update) {
+ /*
+ * Get an available register. We start with a
+ * bitmask with 1's for available registers.
+ * We truncate to the low 32 registers since
+ * we are guaranteed to have set bits in the
+ * low 32 bits, then use ctz to pick the first.
+ */
+ u32 mask = (u32) ~((1ULL << get_Dest_X0(bundle)) |
+ (1ULL << get_SrcA_X0(bundle)) |
+ (1ULL << get_SrcB_X0(bundle)) |
+ (1ULL << target_reg));
+ temp_reg = __builtin_ctz(mask);
+ state->update_reg = temp_reg;
+ state->update_value = regs->regs[temp_reg];
+ regs->regs[temp_reg] = (unsigned long) (pc+1);
+ regs->flags |= PT_FLAGS_RESTORE_REGS;
+ bundle = move_X1(bundle, target_reg, temp_reg);
+ }
+ } else {
+ int opcode = get_Opcode_Y2(bundle);
+
+ switch (opcode) {
+ /* loads */
+ case LH_OPCODE_Y2:
+ mem_op = MEMOP_LOAD;
+ size = 2;
+ sign_ext = 1;
+ break;
+
+ case LH_U_OPCODE_Y2:
+ mem_op = MEMOP_LOAD;
+ size = 2;
+ sign_ext = 0;
+ break;
+
+ case LW_OPCODE_Y2:
+ mem_op = MEMOP_LOAD;
+ size = 4;
+ break;
+
+ /* stores */
+ case SH_OPCODE_Y2:
+ mem_op = MEMOP_STORE;
+ size = 2;
+ break;
+
+ case SW_OPCODE_Y2:
+ mem_op = MEMOP_STORE;
+ size = 4;
+ break;
+ }
+ }
+
+ /*
+ * Check if we need to rewrite an unaligned load/store.
+ * Returning zero is a special value meaning we need to SIGSEGV.
+ */
+ if (mem_op != MEMOP_NONE && unaligned_fixup >= 0) {
+ bundle = rewrite_load_store_unaligned(state, bundle, regs,
+ mem_op, size, sign_ext);
+ if (bundle == 0)
+ return;
+ }
+
+ /* write the bundle to our execution area */
+ buffer = state->buffer;
+ err = __put_user(bundle, buffer++);
+
+ /*
+ * If we're really single-stepping, we take an INT_ILL after.
+ * If we're just handling an unaligned access, we can just
+ * jump directly back to where we were in user code.
+ */
+ if (is_single_step) {
+ err |= __put_user(__single_step_ill_insn, buffer++);
+ err |= __put_user(__single_step_ill_insn, buffer++);
+ } else {
+ long delta;
+
+ if (state->update) {
+ /* We have some state to update; do it inline */
+ int ha16;
+ bundle = __single_step_addli_insn;
+ bundle |= create_Dest_X1(state->update_reg);
+ bundle |= create_Imm16_X1(state->update_value);
+ err |= __put_user(bundle, buffer++);
+ bundle = __single_step_auli_insn;
+ bundle |= create_Dest_X1(state->update_reg);
+ bundle |= create_SrcA_X1(state->update_reg);
+ ha16 = (state->update_value + 0x8000) >> 16;
+ bundle |= create_Imm16_X1(ha16);
+ err |= __put_user(bundle, buffer++);
+ state->update = 0;
+ }
+
+ /* End with a jump back to the next instruction */
+ delta = ((regs->pc + TILE_BUNDLE_SIZE_IN_BYTES) -
+ (unsigned long)buffer) >>
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES;
+ bundle = __single_step_j_insn;
+ bundle |= create_JOffLong_X1(delta);
+ err |= __put_user(bundle, buffer++);
+ }
+
+ if (err) {
+ printk("Fault when writing to single-step buffer\n");
+ return;
+ }
+
+ /*
+ * Flush the buffer.
+ * We do a local flush only, since this is a thread-specific buffer.
+ */
+ __flush_icache_range((unsigned long) state->buffer,
+ (unsigned long) buffer);
+
+ /* Indicate enabled */
+ state->is_enabled = is_single_step;
+ regs->pc = (unsigned long) state->buffer;
+
+ /* Fault immediately if we are coming back from a syscall. */
+ if (regs->faultnum == INT_SWINT_1)
+ regs->pc += 8;
+}
+
+#endif /* !__tilegx__ */
diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c
new file mode 100644
index 000000000000..782c1bfa6dfe
--- /dev/null
+++ b/arch/tile/kernel/smp.c
@@ -0,0 +1,202 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * TILE SMP support routines.
+ */
+
+#include <linux/smp.h>
+#include <linux/irq.h>
+#include <asm/cacheflush.h>
+
+HV_Topology smp_topology __write_once;
+
+
+/*
+ * Top-level send_IPI*() functions to send messages to other cpus.
+ */
+
+/* Set by smp_send_stop() to avoid recursive panics. */
+static int stopping_cpus;
+
+void send_IPI_single(int cpu, int tag)
+{
+ HV_Recipient recip = {
+ .y = cpu / smp_width,
+ .x = cpu % smp_width,
+ .state = HV_TO_BE_SENT
+ };
+ int rc = hv_send_message(&recip, 1, (HV_VirtAddr)&tag, sizeof(tag));
+ BUG_ON(rc <= 0);
+}
+
+void send_IPI_many(const struct cpumask *mask, int tag)
+{
+ HV_Recipient recip[NR_CPUS];
+ int cpu, sent;
+ int nrecip = 0;
+ int my_cpu = smp_processor_id();
+ for_each_cpu(cpu, mask) {
+ HV_Recipient *r;
+ BUG_ON(cpu == my_cpu);
+ r = &recip[nrecip++];
+ r->y = cpu / smp_width;
+ r->x = cpu % smp_width;
+ r->state = HV_TO_BE_SENT;
+ }
+ sent = 0;
+ while (sent < nrecip) {
+ int rc = hv_send_message(recip, nrecip,
+ (HV_VirtAddr)&tag, sizeof(tag));
+ if (rc <= 0) {
+ if (!stopping_cpus) /* avoid recursive panic */
+ panic("hv_send_message returned %d", rc);
+ break;
+ }
+ sent += rc;
+ }
+}
+
+void send_IPI_allbutself(int tag)
+{
+ struct cpumask mask;
+ cpumask_copy(&mask, cpu_online_mask);
+ cpumask_clear_cpu(smp_processor_id(), &mask);
+ send_IPI_many(&mask, tag);
+}
+
+
+/*
+ * Provide smp_call_function_mask, but also run function locally
+ * if specified in the mask.
+ */
+void on_each_cpu_mask(const struct cpumask *mask, void (*func)(void *),
+ void *info, bool wait)
+{
+ int cpu = get_cpu();
+ smp_call_function_many(mask, func, info, wait);
+ if (cpumask_test_cpu(cpu, mask)) {
+ local_irq_disable();
+ func(info);
+ local_irq_enable();
+ }
+ put_cpu();
+}
+
+
+/*
+ * Functions related to starting/stopping cpus.
+ */
+
+/* Handler to start the current cpu. */
+static void smp_start_cpu_interrupt(void)
+{
+ extern unsigned long start_cpu_function_addr;
+ get_irq_regs()->pc = start_cpu_function_addr;
+}
+
+/* Handler to stop the current cpu. */
+static void smp_stop_cpu_interrupt(void)
+{
+ set_cpu_online(smp_processor_id(), 0);
+ raw_local_irq_disable_all();
+ for (;;)
+ asm("nap");
+}
+
+/* This function calls the 'stop' function on all other CPUs in the system. */
+void smp_send_stop(void)
+{
+ stopping_cpus = 1;
+ send_IPI_allbutself(MSG_TAG_STOP_CPU);
+}
+
+
+/*
+ * Dispatch code called from hv_message_intr() for HV_MSG_TILE hv messages.
+ */
+void evaluate_message(int tag)
+{
+ switch (tag) {
+ case MSG_TAG_START_CPU: /* Start up a cpu */
+ smp_start_cpu_interrupt();
+ break;
+
+ case MSG_TAG_STOP_CPU: /* Sent to shut down slave CPU's */
+ smp_stop_cpu_interrupt();
+ break;
+
+ case MSG_TAG_CALL_FUNCTION_MANY: /* Call function on cpumask */
+ generic_smp_call_function_interrupt();
+ break;
+
+ case MSG_TAG_CALL_FUNCTION_SINGLE: /* Call function on one other CPU */
+ generic_smp_call_function_single_interrupt();
+ break;
+
+ default:
+ panic("Unknown IPI message tag %d", tag);
+ break;
+ }
+}
+
+
+/*
+ * flush_icache_range() code uses smp_call_function().
+ */
+
+struct ipi_flush {
+ unsigned long start;
+ unsigned long end;
+};
+
+static void ipi_flush_icache_range(void *info)
+{
+ struct ipi_flush *flush = (struct ipi_flush *) info;
+ __flush_icache_range(flush->start, flush->end);
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+ struct ipi_flush flush = { start, end };
+ preempt_disable();
+ on_each_cpu(ipi_flush_icache_range, &flush, 1);
+ preempt_enable();
+}
+
+
+/*
+ * The smp_send_reschedule() path does not use the hv_message_intr()
+ * path but instead the faster tile_dev_intr() path for interrupts.
+ */
+
+irqreturn_t handle_reschedule_ipi(int irq, void *token)
+{
+ /*
+ * Nothing to do here; when we return from interrupt, the
+ * rescheduling will occur there. But do bump the interrupt
+ * profiler count in the meantime.
+ */
+ __get_cpu_var(irq_stat).irq_resched_count++;
+
+ return IRQ_HANDLED;
+}
+
+void smp_send_reschedule(int cpu)
+{
+ HV_Coord coord;
+
+ WARN_ON(cpu_is_offline(cpu));
+ coord.y = cpu / smp_width;
+ coord.x = cpu % smp_width;
+ hv_trigger_ipi(coord, IRQ_RESCHEDULE);
+}
diff --git a/arch/tile/kernel/smpboot.c b/arch/tile/kernel/smpboot.c
new file mode 100644
index 000000000000..aa3aafdb4b93
--- /dev/null
+++ b/arch/tile/kernel/smpboot.c
@@ -0,0 +1,293 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/smp_lock.h>
+#include <linux/bootmem.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <asm/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+
+/*
+ * This assembly function is provided in entry.S.
+ * When called, it loops on a nap instruction forever.
+ * FIXME: should be in a header somewhere.
+ */
+extern void smp_nap(void);
+
+/* State of each CPU. */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+/* The messaging code jumps to this pointer during boot-up */
+unsigned long start_cpu_function_addr;
+
+/* Called very early during startup to mark boot cpu as online */
+void __init smp_prepare_boot_cpu(void)
+{
+ int cpu = smp_processor_id();
+ set_cpu_online(cpu, 1);
+ set_cpu_present(cpu, 1);
+ __get_cpu_var(cpu_state) = CPU_ONLINE;
+
+ init_messaging();
+}
+
+static void start_secondary(void);
+
+/*
+ * Called at the top of init() to launch all the other CPUs.
+ * They run free to complete their initialization and then wait
+ * until they get an IPI from the boot cpu to come online.
+ */
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ long rc;
+ int cpu, cpu_count;
+ int boot_cpu = smp_processor_id();
+
+ current_thread_info()->cpu = boot_cpu;
+
+ /*
+ * Pin this task to the boot CPU while we bring up the others,
+ * just to make sure we don't uselessly migrate as they come up.
+ */
+ rc = sched_setaffinity(current->pid, cpumask_of(boot_cpu));
+ if (rc != 0)
+ printk("Couldn't set init affinity to boot cpu (%ld)\n", rc);
+
+ /* Print information about disabled and dataplane cpus. */
+ print_disabled_cpus();
+
+ /*
+ * Tell the messaging subsystem how to respond to the
+ * startup message. We use a level of indirection to avoid
+ * confusing the linker with the fact that the messaging
+ * subsystem is calling __init code.
+ */
+ start_cpu_function_addr = (unsigned long) &online_secondary;
+
+ /* Set up thread context for all new processors. */
+ cpu_count = 1;
+ for (cpu = 0; cpu < NR_CPUS; ++cpu) {
+ struct task_struct *idle;
+
+ if (cpu == boot_cpu)
+ continue;
+
+ if (!cpu_possible(cpu)) {
+ /*
+ * Make this processor do nothing on boot.
+ * Note that we don't give the boot_pc function
+ * a stack, so it has to be assembly code.
+ */
+ per_cpu(boot_sp, cpu) = 0;
+ per_cpu(boot_pc, cpu) = (unsigned long) smp_nap;
+ continue;
+ }
+
+ /* Create a new idle thread to run start_secondary() */
+ idle = fork_idle(cpu);
+ if (IS_ERR(idle))
+ panic("failed fork for CPU %d", cpu);
+ idle->thread.pc = (unsigned long) start_secondary;
+
+ /* Make this thread the boot thread for this processor */
+ per_cpu(boot_sp, cpu) = task_ksp0(idle);
+ per_cpu(boot_pc, cpu) = idle->thread.pc;
+
+ ++cpu_count;
+ }
+ BUG_ON(cpu_count > (max_cpus ? max_cpus : 1));
+
+ /* Fire up the other tiles, if any */
+ init_cpu_present(cpu_possible_mask);
+ if (cpumask_weight(cpu_present_mask) > 1) {
+ mb(); /* make sure all data is visible to new processors */
+ hv_start_all_tiles();
+ }
+}
+
+static __initdata struct cpumask init_affinity;
+
+static __init int reset_init_affinity(void)
+{
+ long rc = sched_setaffinity(current->pid, &init_affinity);
+ if (rc != 0)
+ printk(KERN_WARNING "couldn't reset init affinity (%ld)\n",
+ rc);
+ return 0;
+}
+late_initcall(reset_init_affinity);
+
+struct cpumask cpu_started __cpuinitdata;
+
+/*
+ * Activate a secondary processor. Very minimal; don't add anything
+ * to this path without knowing what you're doing, since SMP booting
+ * is pretty fragile.
+ */
+static void __cpuinit start_secondary(void)
+{
+ int cpuid = smp_processor_id();
+
+ /* Set our thread pointer appropriately. */
+ set_my_cpu_offset(__per_cpu_offset[cpuid]);
+
+ preempt_disable();
+
+ /*
+ * In large machines even this will slow us down, since we
+ * will be contending for for the printk spinlock.
+ */
+ /* printk(KERN_DEBUG "Initializing CPU#%d\n", cpuid); */
+
+ /* Initialize the current asid for our first page table. */
+ __get_cpu_var(current_asid) = min_asid;
+
+ /* Set up this thread as another owner of the init_mm */
+ atomic_inc(&init_mm.mm_count);
+ current->active_mm = &init_mm;
+ if (current->mm)
+ BUG();
+ enter_lazy_tlb(&init_mm, current);
+
+ /* Enable IRQs. */
+ init_per_tile_IRQs();
+
+ /* Allow hypervisor messages to be received */
+ init_messaging();
+ local_irq_enable();
+
+ /* Indicate that we're ready to come up. */
+ /* Must not do this before we're ready to receive messages */
+ if (cpumask_test_and_set_cpu(cpuid, &cpu_started)) {
+ printk(KERN_WARNING "CPU#%d already started!\n", cpuid);
+ for (;;)
+ local_irq_enable();
+ }
+
+ smp_nap();
+}
+
+void setup_mpls(void); /* from kernel/setup.c */
+void store_permanent_mappings(void);
+
+/*
+ * Bring a secondary processor online.
+ */
+void __cpuinit online_secondary()
+{
+ /*
+ * low-memory mappings have been cleared, flush them from
+ * the local TLBs too.
+ */
+ local_flush_tlb();
+
+ BUG_ON(in_interrupt());
+
+ /* This must be done before setting cpu_online_mask */
+ wmb();
+
+ /*
+ * We need to hold call_lock, so there is no inconsistency
+ * between the time smp_call_function() determines number of
+ * IPI recipients, and the time when the determination is made
+ * for which cpus receive the IPI. Holding this
+ * lock helps us to not include this cpu in a currently in progress
+ * smp_call_function().
+ */
+ ipi_call_lock();
+ set_cpu_online(smp_processor_id(), 1);
+ ipi_call_unlock();
+ __get_cpu_var(cpu_state) = CPU_ONLINE;
+
+ /* Set up MPLs for this processor */
+ setup_mpls();
+
+
+ /* Set up tile-timer clock-event device on this cpu */
+ setup_tile_timer();
+
+ preempt_enable();
+
+ store_permanent_mappings();
+
+ cpu_idle();
+}
+
+int __cpuinit __cpu_up(unsigned int cpu)
+{
+ /* Wait 5s total for all CPUs for them to come online */
+ static int timeout;
+ for (; !cpumask_test_cpu(cpu, &cpu_started); timeout++) {
+ if (timeout >= 50000) {
+ printk(KERN_INFO "skipping unresponsive cpu%d\n", cpu);
+ local_irq_enable();
+ return -EIO;
+ }
+ udelay(100);
+ }
+
+ local_irq_enable();
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+
+ /* Unleash the CPU! */
+ send_IPI_single(cpu, MSG_TAG_START_CPU);
+ while (!cpumask_test_cpu(cpu, cpu_online_mask))
+ cpu_relax();
+ return 0;
+}
+
+static void panic_start_cpu(void)
+{
+ panic("Received a MSG_START_CPU IPI after boot finished.");
+}
+
+void __init smp_cpus_done(unsigned int max_cpus)
+{
+ int cpu, next, rc;
+
+ /* Reset the response to a (now illegal) MSG_START_CPU IPI. */
+ start_cpu_function_addr = (unsigned long) &panic_start_cpu;
+
+ cpumask_copy(&init_affinity, cpu_online_mask);
+
+ /*
+ * Pin ourselves to a single cpu in the initial affinity set
+ * so that kernel mappings for the rootfs are not in the dataplane,
+ * if set, and to avoid unnecessary migrating during bringup.
+ * Use the last cpu just in case the whole chip has been
+ * isolated from the scheduler, to keep init away from likely
+ * more useful user code. This also ensures that work scheduled
+ * via schedule_delayed_work() in the init routines will land
+ * on this cpu.
+ */
+ for (cpu = cpumask_first(&init_affinity);
+ (next = cpumask_next(cpu, &init_affinity)) < nr_cpu_ids;
+ cpu = next)
+ ;
+ rc = sched_setaffinity(current->pid, cpumask_of(cpu));
+ if (rc != 0)
+ printk("Couldn't set init affinity to cpu %d (%d)\n", cpu, rc);
+}
diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c
new file mode 100644
index 000000000000..382170b4b40a
--- /dev/null
+++ b/arch/tile/kernel/stack.c
@@ -0,0 +1,485 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/kallsyms.h>
+#include <linux/stacktrace.h>
+#include <linux/uaccess.h>
+#include <linux/mmzone.h>
+#include <asm/backtrace.h>
+#include <asm/page.h>
+#include <asm/tlbflush.h>
+#include <asm/ucontext.h>
+#include <asm/sigframe.h>
+#include <asm/stack.h>
+#include <arch/abi.h>
+#include <arch/interrupts.h>
+
+
+/* Is address on the specified kernel stack? */
+static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp)
+{
+ ulong kstack_base = (ulong) kbt->task->stack;
+ if (kstack_base == 0) /* corrupt task pointer; just follow stack... */
+ return sp >= PAGE_OFFSET && sp < (unsigned long)high_memory;
+ return sp >= kstack_base && sp < kstack_base + THREAD_SIZE;
+}
+
+/* Is address in the specified kernel code? */
+static int in_kernel_text(VirtualAddress address)
+{
+ return (address >= MEM_SV_INTRPT &&
+ address < MEM_SV_INTRPT + HPAGE_SIZE);
+}
+
+/* Is address valid for reading? */
+static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address)
+{
+ HV_PTE *l1_pgtable = kbt->pgtable;
+ HV_PTE *l2_pgtable;
+ unsigned long pfn;
+ HV_PTE pte;
+ struct page *page;
+
+ pte = l1_pgtable[HV_L1_INDEX(address)];
+ if (!hv_pte_get_present(pte))
+ return 0;
+ pfn = hv_pte_get_pfn(pte);
+ if (pte_huge(pte)) {
+ if (!pfn_valid(pfn)) {
+ printk(KERN_ERR "huge page has bad pfn %#lx\n", pfn);
+ return 0;
+ }
+ return hv_pte_get_present(pte) && hv_pte_get_readable(pte);
+ }
+
+ page = pfn_to_page(pfn);
+ if (PageHighMem(page)) {
+ printk(KERN_ERR "L2 page table not in LOWMEM (%#llx)\n",
+ HV_PFN_TO_CPA(pfn));
+ return 0;
+ }
+ l2_pgtable = (HV_PTE *)pfn_to_kaddr(pfn);
+ pte = l2_pgtable[HV_L2_INDEX(address)];
+ return hv_pte_get_present(pte) && hv_pte_get_readable(pte);
+}
+
+/* Callback for backtracer; basically a glorified memcpy */
+static bool read_memory_func(void *result, VirtualAddress address,
+ unsigned int size, void *vkbt)
+{
+ int retval;
+ struct KBacktraceIterator *kbt = (struct KBacktraceIterator *)vkbt;
+ if (in_kernel_text(address)) {
+ /* OK to read kernel code. */
+ } else if (address >= PAGE_OFFSET) {
+ /* We only tolerate kernel-space reads of this task's stack */
+ if (!in_kernel_stack(kbt, address))
+ return 0;
+ } else if (kbt->pgtable == NULL) {
+ return 0; /* can't read user space in other tasks */
+ } else if (!valid_address(kbt, address)) {
+ return 0; /* invalid user-space address */
+ }
+ pagefault_disable();
+ retval = __copy_from_user_inatomic(result, (const void *)address,
+ size);
+ pagefault_enable();
+ return (retval == 0);
+}
+
+/* Return a pt_regs pointer for a valid fault handler frame */
+static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt)
+{
+#ifndef __tilegx__
+ const char *fault = NULL; /* happy compiler */
+ char fault_buf[64];
+ VirtualAddress sp = kbt->it.sp;
+ struct pt_regs *p;
+
+ if (!in_kernel_stack(kbt, sp))
+ return NULL;
+ if (!in_kernel_stack(kbt, sp + C_ABI_SAVE_AREA_SIZE + PTREGS_SIZE-1))
+ return NULL;
+ p = (struct pt_regs *)(sp + C_ABI_SAVE_AREA_SIZE);
+ if (p->faultnum == INT_SWINT_1 || p->faultnum == INT_SWINT_1_SIGRETURN)
+ fault = "syscall";
+ else {
+ if (kbt->verbose) { /* else we aren't going to use it */
+ snprintf(fault_buf, sizeof(fault_buf),
+ "interrupt %ld", p->faultnum);
+ fault = fault_buf;
+ }
+ }
+ if (EX1_PL(p->ex1) == KERNEL_PL &&
+ in_kernel_text(p->pc) &&
+ in_kernel_stack(kbt, p->sp) &&
+ p->sp >= sp) {
+ if (kbt->verbose)
+ printk(KERN_ERR " <%s while in kernel mode>\n", fault);
+ } else if (EX1_PL(p->ex1) == USER_PL &&
+ p->pc < PAGE_OFFSET &&
+ p->sp < PAGE_OFFSET) {
+ if (kbt->verbose)
+ printk(KERN_ERR " <%s while in user mode>\n", fault);
+ } else if (kbt->verbose) {
+ printk(KERN_ERR " (odd fault: pc %#lx, sp %#lx, ex1 %#lx?)\n",
+ p->pc, p->sp, p->ex1);
+ p = NULL;
+ }
+ if (!kbt->profile || (INT_MASK(p->faultnum) & QUEUED_INTERRUPTS) == 0)
+ return p;
+#endif
+ return NULL;
+}
+
+/* Is the pc pointing to a sigreturn trampoline? */
+static int is_sigreturn(VirtualAddress pc)
+{
+ return (pc == VDSO_BASE);
+}
+
+/* Return a pt_regs pointer for a valid signal handler frame */
+static struct pt_regs *valid_sigframe(struct KBacktraceIterator* kbt)
+{
+ BacktraceIterator *b = &kbt->it;
+
+ if (b->pc == VDSO_BASE) {
+ struct rt_sigframe *frame;
+ unsigned long sigframe_top =
+ b->sp + sizeof(struct rt_sigframe) - 1;
+ if (!valid_address(kbt, b->sp) ||
+ !valid_address(kbt, sigframe_top)) {
+ if (kbt->verbose)
+ printk(" (odd signal: sp %#lx?)\n",
+ (unsigned long)(b->sp));
+ return NULL;
+ }
+ frame = (struct rt_sigframe *)b->sp;
+ if (kbt->verbose) {
+ printk(KERN_ERR " <received signal %d>\n",
+ frame->info.si_signo);
+ }
+ return &frame->uc.uc_mcontext.regs;
+ }
+ return NULL;
+}
+
+int KBacktraceIterator_is_sigreturn(struct KBacktraceIterator *kbt)
+{
+ return is_sigreturn(kbt->it.pc);
+}
+
+static int KBacktraceIterator_restart(struct KBacktraceIterator *kbt)
+{
+ struct pt_regs *p;
+
+ p = valid_fault_handler(kbt);
+ if (p == NULL)
+ p = valid_sigframe(kbt);
+ if (p == NULL)
+ return 0;
+ backtrace_init(&kbt->it, read_memory_func, kbt,
+ p->pc, p->lr, p->sp, p->regs[52]);
+ kbt->new_context = 1;
+ return 1;
+}
+
+/* Find a frame that isn't a sigreturn, if there is one. */
+static int KBacktraceIterator_next_item_inclusive(
+ struct KBacktraceIterator *kbt)
+{
+ for (;;) {
+ do {
+ if (!KBacktraceIterator_is_sigreturn(kbt))
+ return 1;
+ } while (backtrace_next(&kbt->it));
+
+ if (!KBacktraceIterator_restart(kbt))
+ return 0;
+ }
+}
+
+/*
+ * If the current sp is on a page different than what we recorded
+ * as the top-of-kernel-stack last time we context switched, we have
+ * probably blown the stack, and nothing is going to work out well.
+ * If we can at least get out a warning, that may help the debug,
+ * though we probably won't be able to backtrace into the code that
+ * actually did the recursive damage.
+ */
+static void validate_stack(struct pt_regs *regs)
+{
+ int cpu = smp_processor_id();
+ unsigned long ksp0 = get_current_ksp0();
+ unsigned long ksp0_base = ksp0 - THREAD_SIZE;
+ unsigned long sp = stack_pointer;
+
+ if (EX1_PL(regs->ex1) == KERNEL_PL && regs->sp >= ksp0) {
+ printk("WARNING: cpu %d: kernel stack page %#lx underrun!\n"
+ " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
+ cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+ }
+
+ else if (sp < ksp0_base + sizeof(struct thread_info)) {
+ printk("WARNING: cpu %d: kernel stack page %#lx overrun!\n"
+ " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n",
+ cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr);
+ }
+}
+
+void KBacktraceIterator_init(struct KBacktraceIterator *kbt,
+ struct task_struct *t, struct pt_regs *regs)
+{
+ VirtualAddress pc, lr, sp, r52;
+ int is_current;
+
+ /*
+ * Set up callback information. We grab the kernel stack base
+ * so we will allow reads of that address range, and if we're
+ * asking about the current process we grab the page table
+ * so we can check user accesses before trying to read them.
+ * We flush the TLB to avoid any weird skew issues.
+ */
+ is_current = (t == NULL);
+ kbt->is_current = is_current;
+ if (is_current)
+ t = validate_current();
+ kbt->task = t;
+ kbt->pgtable = NULL;
+ kbt->verbose = 0; /* override in caller if desired */
+ kbt->profile = 0; /* override in caller if desired */
+ kbt->end = 0;
+ kbt->new_context = 0;
+ if (is_current) {
+ HV_PhysAddr pgdir_pa = hv_inquire_context().page_table;
+ if (pgdir_pa == (unsigned long)swapper_pg_dir - PAGE_OFFSET) {
+ /*
+ * Not just an optimization: this also allows
+ * this to work at all before va/pa mappings
+ * are set up.
+ */
+ kbt->pgtable = swapper_pg_dir;
+ } else {
+ struct page *page = pfn_to_page(PFN_DOWN(pgdir_pa));
+ if (!PageHighMem(page))
+ kbt->pgtable = __va(pgdir_pa);
+ else
+ printk(KERN_ERR "page table not in LOWMEM"
+ " (%#llx)\n", pgdir_pa);
+ }
+ local_flush_tlb_all();
+ validate_stack(regs);
+ }
+
+ if (regs == NULL) {
+ extern const void *get_switch_to_pc(void);
+ if (is_current || t->state == TASK_RUNNING) {
+ /* Can't do this; we need registers */
+ kbt->end = 1;
+ return;
+ }
+ pc = (ulong) get_switch_to_pc();
+ lr = t->thread.pc;
+ sp = t->thread.ksp;
+ r52 = 0;
+ } else {
+ pc = regs->pc;
+ lr = regs->lr;
+ sp = regs->sp;
+ r52 = regs->regs[52];
+ }
+
+ backtrace_init(&kbt->it, read_memory_func, kbt, pc, lr, sp, r52);
+ kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+}
+EXPORT_SYMBOL(KBacktraceIterator_init);
+
+int KBacktraceIterator_end(struct KBacktraceIterator *kbt)
+{
+ return kbt->end;
+}
+EXPORT_SYMBOL(KBacktraceIterator_end);
+
+void KBacktraceIterator_next(struct KBacktraceIterator *kbt)
+{
+ kbt->new_context = 0;
+ if (!backtrace_next(&kbt->it) &&
+ !KBacktraceIterator_restart(kbt)) {
+ kbt->end = 1;
+ return;
+ }
+
+ kbt->end = !KBacktraceIterator_next_item_inclusive(kbt);
+}
+EXPORT_SYMBOL(KBacktraceIterator_next);
+
+/*
+ * This method wraps the backtracer's more generic support.
+ * It is only invoked from the architecture-specific code; show_stack()
+ * and dump_stack() (in entry.S) are architecture-independent entry points.
+ */
+void tile_show_stack(struct KBacktraceIterator *kbt, int headers)
+{
+ int i;
+
+ if (headers) {
+ /*
+ * Add a blank line since if we are called from panic(),
+ * then bust_spinlocks() spit out a space in front of us
+ * and it will mess up our KERN_ERR.
+ */
+ printk("\n");
+ printk(KERN_ERR "Starting stack dump of tid %d, pid %d (%s)"
+ " on cpu %d at cycle %lld\n",
+ kbt->task->pid, kbt->task->tgid, kbt->task->comm,
+ smp_processor_id(), get_cycles());
+ }
+#ifdef __tilegx__
+ if (kbt->is_current) {
+ __insn_mtspr(SPR_SIM_CONTROL,
+ SIM_DUMP_SPR_ARG(SIM_DUMP_BACKTRACE));
+ }
+#endif
+ kbt->verbose = 1;
+ i = 0;
+ for (; !KBacktraceIterator_end(kbt); KBacktraceIterator_next(kbt)) {
+ char *modname;
+ const char *name;
+ unsigned long address = kbt->it.pc;
+ unsigned long offset, size;
+ char namebuf[KSYM_NAME_LEN+100];
+
+ if (address >= PAGE_OFFSET)
+ name = kallsyms_lookup(address, &size, &offset,
+ &modname, namebuf);
+ else
+ name = NULL;
+
+ if (!name)
+ namebuf[0] = '\0';
+ else {
+ size_t namelen = strlen(namebuf);
+ size_t remaining = (sizeof(namebuf) - 1) - namelen;
+ char *p = namebuf + namelen;
+ int rc = snprintf(p, remaining, "+%#lx/%#lx ",
+ offset, size);
+ if (modname && rc < remaining)
+ snprintf(p + rc, remaining - rc,
+ "[%s] ", modname);
+ namebuf[sizeof(namebuf)-1] = '\0';
+ }
+
+ printk(KERN_ERR " frame %d: 0x%lx %s(sp 0x%lx)\n",
+ i++, address, namebuf, (unsigned long)(kbt->it.sp));
+
+ if (i >= 100) {
+ printk(KERN_ERR "Stack dump truncated"
+ " (%d frames)\n", i);
+ break;
+ }
+ }
+ if (headers)
+ printk(KERN_ERR "Stack dump complete\n");
+}
+EXPORT_SYMBOL(tile_show_stack);
+
+
+/* This is called from show_regs() and _dump_stack() */
+void dump_stack_regs(struct pt_regs *regs)
+{
+ struct KBacktraceIterator kbt;
+ KBacktraceIterator_init(&kbt, NULL, regs);
+ tile_show_stack(&kbt, 1);
+}
+EXPORT_SYMBOL(dump_stack_regs);
+
+static struct pt_regs *regs_to_pt_regs(struct pt_regs *regs,
+ ulong pc, ulong lr, ulong sp, ulong r52)
+{
+ memset(regs, 0, sizeof(struct pt_regs));
+ regs->pc = pc;
+ regs->lr = lr;
+ regs->sp = sp;
+ regs->regs[52] = r52;
+ return regs;
+}
+
+/* This is called from dump_stack() and just converts to pt_regs */
+void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52)
+{
+ struct pt_regs regs;
+ dump_stack_regs(regs_to_pt_regs(&regs, pc, lr, sp, r52));
+}
+
+/* This is called from KBacktraceIterator_init_current() */
+void _KBacktraceIterator_init_current(struct KBacktraceIterator *kbt, ulong pc,
+ ulong lr, ulong sp, ulong r52)
+{
+ struct pt_regs regs;
+ KBacktraceIterator_init(kbt, NULL,
+ regs_to_pt_regs(&regs, pc, lr, sp, r52));
+}
+
+/* This is called only from kernel/sched.c, with esp == NULL */
+void show_stack(struct task_struct *task, unsigned long *esp)
+{
+ struct KBacktraceIterator kbt;
+ if (task == NULL || task == current)
+ KBacktraceIterator_init_current(&kbt);
+ else
+ KBacktraceIterator_init(&kbt, task, NULL);
+ tile_show_stack(&kbt, 0);
+}
+
+#ifdef CONFIG_STACKTRACE
+
+/* Support generic Linux stack API too */
+
+void save_stack_trace_tsk(struct task_struct *task, struct stack_trace *trace)
+{
+ struct KBacktraceIterator kbt;
+ int skip = trace->skip;
+ int i = 0;
+
+ if (task == NULL || task == current)
+ KBacktraceIterator_init_current(&kbt);
+ else
+ KBacktraceIterator_init(&kbt, task, NULL);
+ for (; !KBacktraceIterator_end(&kbt); KBacktraceIterator_next(&kbt)) {
+ if (skip) {
+ --skip;
+ continue;
+ }
+ if (i >= trace->max_entries || kbt.it.pc < PAGE_OFFSET)
+ break;
+ trace->entries[i++] = kbt.it.pc;
+ }
+ trace->nr_entries = i;
+}
+EXPORT_SYMBOL(save_stack_trace_tsk);
+
+void save_stack_trace(struct stack_trace *trace)
+{
+ save_stack_trace_tsk(NULL, trace);
+}
+
+#endif
+
+/* In entry.S */
+EXPORT_SYMBOL(KBacktraceIterator_init_current);
diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c
new file mode 100644
index 000000000000..a3d982b212b4
--- /dev/null
+++ b/arch/tile/kernel/sys.c
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This file contains various random system calls that
+ * have a non-standard calling sequence on the Linux/TILE
+ * platform.
+ */
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/syscalls.h>
+#include <linux/mman.h>
+#include <linux/file.h>
+#include <linux/mempolicy.h>
+#include <linux/binfmts.h>
+#include <linux/fs.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/signal.h>
+#include <asm/syscalls.h>
+
+#include <asm/pgtable.h>
+#include <asm/homecache.h>
+#include <arch/chip.h>
+
+SYSCALL_DEFINE0(flush_cache)
+{
+ homecache_evict(cpumask_of(smp_processor_id()));
+ return 0;
+}
+
+/*
+ * Syscalls that pass 64-bit values on 32-bit systems normally
+ * pass them as (low,high) word packed into the immediately adjacent
+ * registers. If the low word naturally falls on an even register,
+ * our ABI makes it work correctly; if not, we adjust it here.
+ * Handling it here means we don't have to fix uclibc AND glibc AND
+ * any other standard libcs we want to support.
+ */
+
+#if !defined(__tilegx__) || defined(CONFIG_COMPAT)
+
+ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count)
+{
+ return sys_readahead(fd, ((loff_t)offset_hi << 32) | offset_lo, count);
+}
+
+long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi,
+ u32 len, int advice)
+{
+ return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo,
+ len, advice);
+}
+
+int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi,
+ u32 len_lo, u32 len_hi, int advice)
+{
+ return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo,
+ ((loff_t)len_hi << 32) | len_lo, advice);
+}
+
+#endif /* 32-bit syscall wrappers */
+
+/*
+ * This API uses a 4KB-page-count offset into the file descriptor.
+ * It is likely not the right API to use on a 64-bit platform.
+ */
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, off_4k)
+{
+#define PAGE_ADJUST (PAGE_SHIFT - 12)
+ if (off_4k & ((1 << PAGE_ADJUST) - 1))
+ return -EINVAL;
+ return sys_mmap_pgoff(addr, len, prot, flags, fd,
+ off_4k >> PAGE_ADJUST);
+}
+
+/*
+ * This API uses a byte offset into the file descriptor.
+ * It is likely not the right API to use on a 32-bit platform.
+ */
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags,
+ unsigned long, fd, unsigned long, offset)
+{
+ if (offset & ((1 << PAGE_SHIFT) - 1))
+ return -EINVAL;
+ return sys_mmap_pgoff(addr, len, prot, flags, fd,
+ offset >> PAGE_SHIFT);
+}
+
+
+/* Provide the actual syscall number to call mapping. */
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+#ifndef __tilegx__
+/* See comments at the top of the file. */
+#define sys_fadvise64 sys32_fadvise64
+#define sys_fadvise64_64 sys32_fadvise64_64
+#define sys_readahead sys32_readahead
+#define sys_sync_file_range sys_sync_file_range2
+#endif
+
+void *sys_call_table[__NR_syscalls] = {
+ [0 ... __NR_syscalls-1] = sys_ni_syscall,
+#include <asm/unistd.h>
+};
diff --git a/arch/tile/kernel/tile-desc_32.c b/arch/tile/kernel/tile-desc_32.c
new file mode 100644
index 000000000000..3b78369f86b0
--- /dev/null
+++ b/arch/tile/kernel/tile-desc_32.c
@@ -0,0 +1,13826 @@
+/* Define to include "bfd.h" and get actual BFD relocations below. */
+/* #define WANT_BFD_RELOCS */
+
+#ifdef WANT_BFD_RELOCS
+#include "bfd.h"
+#define MAYBE_BFD_RELOC(X) (X)
+#else
+#define MAYBE_BFD_RELOC(X) -1
+#endif
+
+/* Special registers. */
+#define TREG_LR 55
+#define TREG_SN 56
+#define TREG_ZERO 63
+
+/* FIXME: Rename this. */
+#include <asm/opcode-tile.h>
+
+
+const struct tile_opcode tile_opcodes[394] =
+{
+ { "bpt", TILE_OPC_BPT, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbffffff80000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b3cae00000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "info", TILE_OPC_INFO, 0xf /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0 },
+ { 1 },
+ { 2 },
+ { 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00fffULL,
+ 0xfff807ff80000000ULL,
+ 0x8000000078000fffULL,
+ 0xf80007ff80000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000050100fffULL,
+ 0x302007ff80000000ULL,
+ 0x8000000050000fffULL,
+ 0xc00007ff80000000ULL,
+ -1ULL
+ }
+ },
+ { "infol", TILE_OPC_INFOL, 0x3 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 4 },
+ { 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000fffULL,
+ 0xf80007ff80000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000030000fffULL,
+ 0x200007ff80000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "j", TILE_OPC_J, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 6 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf000000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x5000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jal", TILE_OPC_JAL, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_LR, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 6 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf000000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x6000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "move", TILE_OPC_MOVE, 0xf /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 9, 10 },
+ { 11, 12 },
+ { 13, 14 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0xfffff80000000000ULL,
+ 0x80000000780ff000ULL,
+ 0xf807f80000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000cff000ULL,
+ 0x0833f80000000000ULL,
+ 0x80000000180bf000ULL,
+ 0x9805f80000000000ULL,
+ -1ULL
+ }
+ },
+ { "move.sn", TILE_OPC_MOVE_SN, 0x3 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008cff000ULL,
+ 0x0c33f80000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "movei", TILE_OPC_MOVEI, 0xf /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 0 },
+ { 9, 1 },
+ { 11, 2 },
+ { 13, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00fc0ULL,
+ 0xfff807e000000000ULL,
+ 0x8000000078000fc0ULL,
+ 0xf80007e000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040800fc0ULL,
+ 0x305807e000000000ULL,
+ 0x8000000058000fc0ULL,
+ 0xc80007e000000000ULL,
+ -1ULL
+ }
+ },
+ { "movei.sn", TILE_OPC_MOVEI_SN, 0x3 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 0 },
+ { 9, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00fc0ULL,
+ 0xfff807e000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048800fc0ULL,
+ 0x345807e000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "moveli", TILE_OPC_MOVELI, 0x3 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 4 },
+ { 9, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000fc0ULL,
+ 0xf80007e000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000020000fc0ULL,
+ 0x180007e000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "moveli.sn", TILE_OPC_MOVELI_SN, 0x3 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 4 },
+ { 9, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000fc0ULL,
+ 0xf80007e000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000010000fc0ULL,
+ 0x100007e000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "movelis", TILE_OPC_MOVELIS, 0x3 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 4 },
+ { 9, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000fc0ULL,
+ 0xf80007e000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000010000fc0ULL,
+ 0x100007e000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "prefetch", TILE_OPC_PREFETCH, 0x12 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff81f80000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000003f00000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b501f80000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8000000003f00000ULL
+ }
+ },
+ { "add", TILE_OPC_ADD, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000000c0000ULL,
+ 0x0806000000000000ULL,
+ 0x8000000008000000ULL,
+ 0x8800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "add.sn", TILE_OPC_ADD_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000080c0000ULL,
+ 0x0c06000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addb", TILE_OPC_ADDB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000040000ULL,
+ 0x0802000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addb.sn", TILE_OPC_ADDB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008040000ULL,
+ 0x0c02000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addbs_u", TILE_OPC_ADDBS_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001880000ULL,
+ 0x0888000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addbs_u.sn", TILE_OPC_ADDBS_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009880000ULL,
+ 0x0c88000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addh", TILE_OPC_ADDH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000080000ULL,
+ 0x0804000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addh.sn", TILE_OPC_ADDH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008080000ULL,
+ 0x0c04000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addhs", TILE_OPC_ADDHS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000018c0000ULL,
+ 0x088a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addhs.sn", TILE_OPC_ADDHS_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000098c0000ULL,
+ 0x0c8a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addi", TILE_OPC_ADDI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040300000ULL,
+ 0x3018000000000000ULL,
+ 0x8000000048000000ULL,
+ 0xb800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "addi.sn", TILE_OPC_ADDI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048300000ULL,
+ 0x3418000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addib", TILE_OPC_ADDIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040100000ULL,
+ 0x3008000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addib.sn", TILE_OPC_ADDIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048100000ULL,
+ 0x3408000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addih", TILE_OPC_ADDIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040200000ULL,
+ 0x3010000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addih.sn", TILE_OPC_ADDIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048200000ULL,
+ 0x3410000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addli", TILE_OPC_ADDLI, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 4 },
+ { 9, 10, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000020000000ULL,
+ 0x1800000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addli.sn", TILE_OPC_ADDLI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 4 },
+ { 9, 10, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000010000000ULL,
+ 0x1000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "addlis", TILE_OPC_ADDLIS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 4 },
+ { 9, 10, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000010000000ULL,
+ 0x1000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adds", TILE_OPC_ADDS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001800000ULL,
+ 0x0884000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adds.sn", TILE_OPC_ADDS_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009800000ULL,
+ 0x0c84000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adiffb_u", TILE_OPC_ADIFFB_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000100000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adiffb_u.sn", TILE_OPC_ADIFFB_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008100000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adiffh", TILE_OPC_ADIFFH, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000140000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "adiffh.sn", TILE_OPC_ADIFFH_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008140000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "and", TILE_OPC_AND, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000180000ULL,
+ 0x0808000000000000ULL,
+ 0x8000000018000000ULL,
+ 0x9800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "and.sn", TILE_OPC_AND_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008180000ULL,
+ 0x0c08000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "andi", TILE_OPC_ANDI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000050100000ULL,
+ 0x3020000000000000ULL,
+ 0x8000000050000000ULL,
+ 0xc000000000000000ULL,
+ -1ULL
+ }
+ },
+ { "andi.sn", TILE_OPC_ANDI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000058100000ULL,
+ 0x3420000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "auli", TILE_OPC_AULI, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 4 },
+ { 9, 10, 5 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000030000000ULL,
+ 0x2000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "avgb_u", TILE_OPC_AVGB_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000001c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "avgb_u.sn", TILE_OPC_AVGB_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000081c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "avgh", TILE_OPC_AVGH, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000200000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "avgh.sn", TILE_OPC_AVGH_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008200000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbns", TILE_OPC_BBNS, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000700000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbns.sn", TILE_OPC_BBNS_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000700000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbnst", TILE_OPC_BBNST, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000780000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbnst.sn", TILE_OPC_BBNST_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000780000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbs", TILE_OPC_BBS, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000600000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbs.sn", TILE_OPC_BBS_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000600000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbst", TILE_OPC_BBST, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000680000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bbst.sn", TILE_OPC_BBST_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000680000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgez", TILE_OPC_BGEZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000300000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgez.sn", TILE_OPC_BGEZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000300000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgezt", TILE_OPC_BGEZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000380000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgezt.sn", TILE_OPC_BGEZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000380000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgz", TILE_OPC_BGZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000200000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgz.sn", TILE_OPC_BGZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000200000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgzt", TILE_OPC_BGZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000280000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bgzt.sn", TILE_OPC_BGZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000280000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bitx", TILE_OPC_BITX, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 11, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070161000ULL,
+ -1ULL,
+ 0x80000000680a1000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bitx.sn", TILE_OPC_BITX_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078161000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blez", TILE_OPC_BLEZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000500000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blez.sn", TILE_OPC_BLEZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000500000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blezt", TILE_OPC_BLEZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000580000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blezt.sn", TILE_OPC_BLEZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000580000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blz", TILE_OPC_BLZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000400000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blz.sn", TILE_OPC_BLZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000400000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blzt", TILE_OPC_BLZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000480000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "blzt.sn", TILE_OPC_BLZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000480000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bnz", TILE_OPC_BNZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000100000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bnz.sn", TILE_OPC_BNZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000100000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bnzt", TILE_OPC_BNZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000180000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bnzt.sn", TILE_OPC_BNZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000180000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bytex", TILE_OPC_BYTEX, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 11, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070162000ULL,
+ -1ULL,
+ 0x80000000680a2000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bytex.sn", TILE_OPC_BYTEX_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078162000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bz", TILE_OPC_BZ, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bz.sn", TILE_OPC_BZ_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bzt", TILE_OPC_BZT, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2800000080000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "bzt.sn", TILE_OPC_BZT_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 20 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfc00000780000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x2c00000080000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "clz", TILE_OPC_CLZ, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 11, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070163000ULL,
+ -1ULL,
+ 0x80000000680a3000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "clz.sn", TILE_OPC_CLZ_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078163000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "crc32_32", TILE_OPC_CRC32_32, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000240000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "crc32_32.sn", TILE_OPC_CRC32_32_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008240000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "crc32_8", TILE_OPC_CRC32_8, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000280000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "crc32_8.sn", TILE_OPC_CRC32_8_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008280000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "ctz", TILE_OPC_CTZ, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 11, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070164000ULL,
+ -1ULL,
+ 0x80000000680a4000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "ctz.sn", TILE_OPC_CTZ_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078164000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "drain", TILE_OPC_DRAIN, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b080000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "dtlbpr", TILE_OPC_DTLBPR, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b100000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "dword_align", TILE_OPC_DWORD_ALIGN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000017c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "dword_align.sn", TILE_OPC_DWORD_ALIGN_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000097c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "finv", TILE_OPC_FINV, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b180000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "flush", TILE_OPC_FLUSH, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b200000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "fnop", TILE_OPC_FNOP, 0xf /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { },
+ { },
+ { },
+ { },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000077fff000ULL,
+ 0xfbfff80000000000ULL,
+ 0x80000000780ff000ULL,
+ 0xf807f80000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070165000ULL,
+ 0x400b280000000000ULL,
+ 0x80000000680a5000ULL,
+ 0xd805080000000000ULL,
+ -1ULL
+ }
+ },
+ { "icoh", TILE_OPC_ICOH, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b300000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "ill", TILE_OPC_ILL, 0xa /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0xf807f80000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b380000000000ULL,
+ -1ULL,
+ 0xd805100000000000ULL,
+ -1ULL
+ }
+ },
+ { "inthb", TILE_OPC_INTHB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000002c0000ULL,
+ 0x080a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "inthb.sn", TILE_OPC_INTHB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000082c0000ULL,
+ 0x0c0a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "inthh", TILE_OPC_INTHH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000300000ULL,
+ 0x080c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "inthh.sn", TILE_OPC_INTHH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008300000ULL,
+ 0x0c0c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "intlb", TILE_OPC_INTLB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000340000ULL,
+ 0x080e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "intlb.sn", TILE_OPC_INTLB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008340000ULL,
+ 0x0c0e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "intlh", TILE_OPC_INTLH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000380000ULL,
+ 0x0810000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "intlh.sn", TILE_OPC_INTLH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008380000ULL,
+ 0x0c10000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "inv", TILE_OPC_INV, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b400000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "iret", TILE_OPC_IRET, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b480000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jalb", TILE_OPC_JALB, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_LR, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 22 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x6800000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jalf", TILE_OPC_JALF, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_LR, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 22 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x6000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jalr", TILE_OPC_JALR, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_LR, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0814000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jalrp", TILE_OPC_JALRP, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_LR, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0812000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jb", TILE_OPC_JB, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 22 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x5800000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jf", TILE_OPC_JF, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 22 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x5000000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jr", TILE_OPC_JR, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0818000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "jrp", TILE_OPC_JRP, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0816000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lb", TILE_OPC_LB, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 23, 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b500000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8000000000000000ULL
+ }
+ },
+ { "lb.sn", TILE_OPC_LB_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440b500000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lb_u", TILE_OPC_LB_U, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 23, 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b580000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8100000000000000ULL
+ }
+ },
+ { "lb_u.sn", TILE_OPC_LB_U_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440b580000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lbadd", TILE_OPC_LBADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30b0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lbadd.sn", TILE_OPC_LBADD_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34b0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lbadd_u", TILE_OPC_LBADD_U, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30b8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lbadd_u.sn", TILE_OPC_LBADD_U_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34b8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lh", TILE_OPC_LH, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 23, 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b600000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8200000000000000ULL
+ }
+ },
+ { "lh.sn", TILE_OPC_LH_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440b600000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lh_u", TILE_OPC_LH_U, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 23, 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b680000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8300000000000000ULL
+ }
+ },
+ { "lh_u.sn", TILE_OPC_LH_U_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440b680000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lhadd", TILE_OPC_LHADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30c0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lhadd.sn", TILE_OPC_LHADD_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34c0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lhadd_u", TILE_OPC_LHADD_U, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30c8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lhadd_u.sn", TILE_OPC_LHADD_U_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34c8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lnk", TILE_OPC_LNK, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x081a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lnk.sn", TILE_OPC_LNK_SN, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0c1a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lw", TILE_OPC_LW, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 23, 15 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b700000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8400000000000000ULL
+ }
+ },
+ { "lw.sn", TILE_OPC_LW_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440b700000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lw_na", TILE_OPC_LW_NA, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400bc00000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lw_na.sn", TILE_OPC_LW_NA_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440bc00000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lwadd", TILE_OPC_LWADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30d0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lwadd.sn", TILE_OPC_LWADD_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34d0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lwadd_na", TILE_OPC_LWADD_NA, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30d8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "lwadd_na.sn", TILE_OPC_LWADD_NA_SN, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 24, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x34d8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxb_u", TILE_OPC_MAXB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000003c0000ULL,
+ 0x081c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxb_u.sn", TILE_OPC_MAXB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000083c0000ULL,
+ 0x0c1c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxh", TILE_OPC_MAXH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000400000ULL,
+ 0x081e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxh.sn", TILE_OPC_MAXH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008400000ULL,
+ 0x0c1e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxib_u", TILE_OPC_MAXIB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040400000ULL,
+ 0x3028000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxib_u.sn", TILE_OPC_MAXIB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048400000ULL,
+ 0x3428000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxih", TILE_OPC_MAXIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040500000ULL,
+ 0x3030000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "maxih.sn", TILE_OPC_MAXIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048500000ULL,
+ 0x3430000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mf", TILE_OPC_MF, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b780000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mfspr", TILE_OPC_MFSPR, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 25 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbf8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x3038000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minb_u", TILE_OPC_MINB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000440000ULL,
+ 0x0820000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minb_u.sn", TILE_OPC_MINB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008440000ULL,
+ 0x0c20000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minh", TILE_OPC_MINH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000480000ULL,
+ 0x0822000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minh.sn", TILE_OPC_MINH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008480000ULL,
+ 0x0c22000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minib_u", TILE_OPC_MINIB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040600000ULL,
+ 0x3040000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minib_u.sn", TILE_OPC_MINIB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048600000ULL,
+ 0x3440000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minih", TILE_OPC_MINIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040700000ULL,
+ 0x3048000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "minih.sn", TILE_OPC_MINIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048700000ULL,
+ 0x3448000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mm", TILE_OPC_MM, 0x3 /* pipes */, 5 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16, 26, 27 },
+ { 9, 10, 17, 28, 29 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000070000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000060000000ULL,
+ 0x3800000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mnz", TILE_OPC_MNZ, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000540000ULL,
+ 0x0828000000000000ULL,
+ 0x8000000010000000ULL,
+ 0x9002000000000000ULL,
+ -1ULL
+ }
+ },
+ { "mnz.sn", TILE_OPC_MNZ_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008540000ULL,
+ 0x0c28000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mnzb", TILE_OPC_MNZB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000004c0000ULL,
+ 0x0824000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mnzb.sn", TILE_OPC_MNZB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000084c0000ULL,
+ 0x0c24000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mnzh", TILE_OPC_MNZH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000500000ULL,
+ 0x0826000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mnzh.sn", TILE_OPC_MNZH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008500000ULL,
+ 0x0c26000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mtspr", TILE_OPC_MTSPR, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 30, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbf8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x3050000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_ss", TILE_OPC_MULHH_SS, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 11, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000680000ULL,
+ -1ULL,
+ 0x8000000038000000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_ss.sn", TILE_OPC_MULHH_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008680000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_su", TILE_OPC_MULHH_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000006c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_su.sn", TILE_OPC_MULHH_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000086c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_uu", TILE_OPC_MULHH_UU, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 11, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000700000ULL,
+ -1ULL,
+ 0x8000000038040000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhh_uu.sn", TILE_OPC_MULHH_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008700000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_ss", TILE_OPC_MULHHA_SS, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000580000ULL,
+ -1ULL,
+ 0x8000000040000000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_ss.sn", TILE_OPC_MULHHA_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008580000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_su", TILE_OPC_MULHHA_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000005c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_su.sn", TILE_OPC_MULHHA_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000085c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_uu", TILE_OPC_MULHHA_UU, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000600000ULL,
+ -1ULL,
+ 0x8000000040040000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhha_uu.sn", TILE_OPC_MULHHA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008600000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhhsa_uu", TILE_OPC_MULHHSA_UU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000640000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhhsa_uu.sn", TILE_OPC_MULHHSA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008640000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_ss", TILE_OPC_MULHL_SS, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000880000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_ss.sn", TILE_OPC_MULHL_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008880000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_su", TILE_OPC_MULHL_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000008c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_su.sn", TILE_OPC_MULHL_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000088c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_us", TILE_OPC_MULHL_US, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000900000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_us.sn", TILE_OPC_MULHL_US_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008900000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_uu", TILE_OPC_MULHL_UU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000940000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhl_uu.sn", TILE_OPC_MULHL_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008940000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_ss", TILE_OPC_MULHLA_SS, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000740000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_ss.sn", TILE_OPC_MULHLA_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008740000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_su", TILE_OPC_MULHLA_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000780000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_su.sn", TILE_OPC_MULHLA_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008780000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_us", TILE_OPC_MULHLA_US, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000007c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_us.sn", TILE_OPC_MULHLA_US_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000087c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_uu", TILE_OPC_MULHLA_UU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000800000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhla_uu.sn", TILE_OPC_MULHLA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008800000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhlsa_uu", TILE_OPC_MULHLSA_UU, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000840000ULL,
+ -1ULL,
+ 0x8000000030000000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulhlsa_uu.sn", TILE_OPC_MULHLSA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008840000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_ss", TILE_OPC_MULLL_SS, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 11, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000a80000ULL,
+ -1ULL,
+ 0x8000000038080000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_ss.sn", TILE_OPC_MULLL_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008a80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_su", TILE_OPC_MULLL_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000ac0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_su.sn", TILE_OPC_MULLL_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008ac0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_uu", TILE_OPC_MULLL_UU, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 11, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000b00000ULL,
+ -1ULL,
+ 0x80000000380c0000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulll_uu.sn", TILE_OPC_MULLL_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008b00000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_ss", TILE_OPC_MULLLA_SS, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000980000ULL,
+ -1ULL,
+ 0x8000000040080000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_ss.sn", TILE_OPC_MULLLA_SS_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008980000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_su", TILE_OPC_MULLLA_SU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000009c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_su.sn", TILE_OPC_MULLLA_SU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000089c0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_uu", TILE_OPC_MULLLA_UU, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000a00000ULL,
+ -1ULL,
+ 0x80000000400c0000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mullla_uu.sn", TILE_OPC_MULLLA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008a00000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulllsa_uu", TILE_OPC_MULLLSA_UU, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000a40000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mulllsa_uu.sn", TILE_OPC_MULLLSA_UU_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008a40000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mvnz", TILE_OPC_MVNZ, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000b40000ULL,
+ -1ULL,
+ 0x8000000010040000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mvnz.sn", TILE_OPC_MVNZ_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008b40000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mvz", TILE_OPC_MVZ, 0x5 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 31, 12, 18 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0x80000000780c0000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000b80000ULL,
+ -1ULL,
+ 0x8000000010080000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mvz.sn", TILE_OPC_MVZ_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008b80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mz", TILE_OPC_MZ, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000c40000ULL,
+ 0x082e000000000000ULL,
+ 0x80000000100c0000ULL,
+ 0x9004000000000000ULL,
+ -1ULL
+ }
+ },
+ { "mz.sn", TILE_OPC_MZ_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008c40000ULL,
+ 0x0c2e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mzb", TILE_OPC_MZB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000bc0000ULL,
+ 0x082a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mzb.sn", TILE_OPC_MZB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008bc0000ULL,
+ 0x0c2a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mzh", TILE_OPC_MZH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000c00000ULL,
+ 0x082c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "mzh.sn", TILE_OPC_MZH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008c00000ULL,
+ 0x0c2c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "nap", TILE_OPC_NAP, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b800000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "nop", TILE_OPC_NOP, 0xf /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { },
+ { },
+ { },
+ { },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x8000000077fff000ULL,
+ 0xfbfff80000000000ULL,
+ 0x80000000780ff000ULL,
+ 0xf807f80000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070166000ULL,
+ 0x400b880000000000ULL,
+ 0x80000000680a6000ULL,
+ 0xd805180000000000ULL,
+ -1ULL
+ }
+ },
+ { "nor", TILE_OPC_NOR, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000c80000ULL,
+ 0x0830000000000000ULL,
+ 0x8000000018040000ULL,
+ 0x9802000000000000ULL,
+ -1ULL
+ }
+ },
+ { "nor.sn", TILE_OPC_NOR_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008c80000ULL,
+ 0x0c30000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "or", TILE_OPC_OR, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000cc0000ULL,
+ 0x0832000000000000ULL,
+ 0x8000000018080000ULL,
+ 0x9804000000000000ULL,
+ -1ULL
+ }
+ },
+ { "or.sn", TILE_OPC_OR_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008cc0000ULL,
+ 0x0c32000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "ori", TILE_OPC_ORI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040800000ULL,
+ 0x3058000000000000ULL,
+ 0x8000000058000000ULL,
+ 0xc800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "ori.sn", TILE_OPC_ORI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048800000ULL,
+ 0x3458000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packbs_u", TILE_OPC_PACKBS_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000019c0000ULL,
+ 0x0892000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packbs_u.sn", TILE_OPC_PACKBS_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000099c0000ULL,
+ 0x0c92000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packhb", TILE_OPC_PACKHB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000d00000ULL,
+ 0x0834000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packhb.sn", TILE_OPC_PACKHB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008d00000ULL,
+ 0x0c34000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packhs", TILE_OPC_PACKHS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001980000ULL,
+ 0x0890000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packhs.sn", TILE_OPC_PACKHS_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009980000ULL,
+ 0x0c90000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packlb", TILE_OPC_PACKLB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000d40000ULL,
+ 0x0836000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "packlb.sn", TILE_OPC_PACKLB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008d40000ULL,
+ 0x0c36000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "pcnt", TILE_OPC_PCNT, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 11, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070167000ULL,
+ -1ULL,
+ 0x80000000680a7000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "pcnt.sn", TILE_OPC_PCNT_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078167000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "rl", TILE_OPC_RL, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000d80000ULL,
+ 0x0838000000000000ULL,
+ 0x8000000020000000ULL,
+ 0xa000000000000000ULL,
+ -1ULL
+ }
+ },
+ { "rl.sn", TILE_OPC_RL_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008d80000ULL,
+ 0x0c38000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "rli", TILE_OPC_RLI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 11, 12, 34 },
+ { 13, 14, 35 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0x80000000780e0000ULL,
+ 0xf807000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070020000ULL,
+ 0x4001000000000000ULL,
+ 0x8000000068020000ULL,
+ 0xd801000000000000ULL,
+ -1ULL
+ }
+ },
+ { "rli.sn", TILE_OPC_RLI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078020000ULL,
+ 0x4401000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "s1a", TILE_OPC_S1A, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000dc0000ULL,
+ 0x083a000000000000ULL,
+ 0x8000000008040000ULL,
+ 0x8802000000000000ULL,
+ -1ULL
+ }
+ },
+ { "s1a.sn", TILE_OPC_S1A_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008dc0000ULL,
+ 0x0c3a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "s2a", TILE_OPC_S2A, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000e00000ULL,
+ 0x083c000000000000ULL,
+ 0x8000000008080000ULL,
+ 0x8804000000000000ULL,
+ -1ULL
+ }
+ },
+ { "s2a.sn", TILE_OPC_S2A_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008e00000ULL,
+ 0x0c3c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "s3a", TILE_OPC_S3A, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000e40000ULL,
+ 0x083e000000000000ULL,
+ 0x8000000030040000ULL,
+ 0xb002000000000000ULL,
+ -1ULL
+ }
+ },
+ { "s3a.sn", TILE_OPC_S3A_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008e40000ULL,
+ 0x0c3e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadab_u", TILE_OPC_SADAB_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000e80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadab_u.sn", TILE_OPC_SADAB_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008e80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadah", TILE_OPC_SADAH, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000ec0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadah.sn", TILE_OPC_SADAH_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008ec0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadah_u", TILE_OPC_SADAH_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000f00000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadah_u.sn", TILE_OPC_SADAH_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008f00000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadb_u", TILE_OPC_SADB_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000f40000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadb_u.sn", TILE_OPC_SADB_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008f40000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadh", TILE_OPC_SADH, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000f80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadh.sn", TILE_OPC_SADH_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008f80000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadh_u", TILE_OPC_SADH_U, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000000fc0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sadh_u.sn", TILE_OPC_SADH_U_SN, 0x1 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000008fc0000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sb", TILE_OPC_SB, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 17 },
+ { 0, },
+ { 0, },
+ { 15, 36 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0840000000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8500000000000000ULL
+ }
+ },
+ { "sbadd", TILE_OPC_SBADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 24, 17, 37 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbf8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30e0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seq", TILE_OPC_SEQ, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001080000ULL,
+ 0x0846000000000000ULL,
+ 0x8000000030080000ULL,
+ 0xb004000000000000ULL,
+ -1ULL
+ }
+ },
+ { "seq.sn", TILE_OPC_SEQ_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009080000ULL,
+ 0x0c46000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqb", TILE_OPC_SEQB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001000000ULL,
+ 0x0842000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqb.sn", TILE_OPC_SEQB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009000000ULL,
+ 0x0c42000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqh", TILE_OPC_SEQH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001040000ULL,
+ 0x0844000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqh.sn", TILE_OPC_SEQH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009040000ULL,
+ 0x0c44000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqi", TILE_OPC_SEQI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040b00000ULL,
+ 0x3070000000000000ULL,
+ 0x8000000060000000ULL,
+ 0xd000000000000000ULL,
+ -1ULL
+ }
+ },
+ { "seqi.sn", TILE_OPC_SEQI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048b00000ULL,
+ 0x3470000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqib", TILE_OPC_SEQIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040900000ULL,
+ 0x3060000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqib.sn", TILE_OPC_SEQIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048900000ULL,
+ 0x3460000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqih", TILE_OPC_SEQIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040a00000ULL,
+ 0x3068000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "seqih.sn", TILE_OPC_SEQIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048a00000ULL,
+ 0x3468000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sh", TILE_OPC_SH, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 17 },
+ { 0, },
+ { 0, },
+ { 15, 36 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0854000000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8600000000000000ULL
+ }
+ },
+ { "shadd", TILE_OPC_SHADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 24, 17, 37 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbf8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30e8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shl", TILE_OPC_SHL, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001140000ULL,
+ 0x084c000000000000ULL,
+ 0x8000000020040000ULL,
+ 0xa002000000000000ULL,
+ -1ULL
+ }
+ },
+ { "shl.sn", TILE_OPC_SHL_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009140000ULL,
+ 0x0c4c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlb", TILE_OPC_SHLB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000010c0000ULL,
+ 0x0848000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlb.sn", TILE_OPC_SHLB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000090c0000ULL,
+ 0x0c48000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlh", TILE_OPC_SHLH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001100000ULL,
+ 0x084a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlh.sn", TILE_OPC_SHLH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009100000ULL,
+ 0x0c4a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shli", TILE_OPC_SHLI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 11, 12, 34 },
+ { 13, 14, 35 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0x80000000780e0000ULL,
+ 0xf807000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070080000ULL,
+ 0x4004000000000000ULL,
+ 0x8000000068040000ULL,
+ 0xd802000000000000ULL,
+ -1ULL
+ }
+ },
+ { "shli.sn", TILE_OPC_SHLI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078080000ULL,
+ 0x4404000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlib", TILE_OPC_SHLIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070040000ULL,
+ 0x4002000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlib.sn", TILE_OPC_SHLIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078040000ULL,
+ 0x4402000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlih", TILE_OPC_SHLIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070060000ULL,
+ 0x4003000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shlih.sn", TILE_OPC_SHLIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078060000ULL,
+ 0x4403000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shr", TILE_OPC_SHR, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001200000ULL,
+ 0x0852000000000000ULL,
+ 0x8000000020080000ULL,
+ 0xa004000000000000ULL,
+ -1ULL
+ }
+ },
+ { "shr.sn", TILE_OPC_SHR_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009200000ULL,
+ 0x0c52000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrb", TILE_OPC_SHRB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001180000ULL,
+ 0x084e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrb.sn", TILE_OPC_SHRB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009180000ULL,
+ 0x0c4e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrh", TILE_OPC_SHRH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000011c0000ULL,
+ 0x0850000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrh.sn", TILE_OPC_SHRH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000091c0000ULL,
+ 0x0c50000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shri", TILE_OPC_SHRI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 11, 12, 34 },
+ { 13, 14, 35 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0x80000000780e0000ULL,
+ 0xf807000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000700e0000ULL,
+ 0x4007000000000000ULL,
+ 0x8000000068060000ULL,
+ 0xd803000000000000ULL,
+ -1ULL
+ }
+ },
+ { "shri.sn", TILE_OPC_SHRI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000780e0000ULL,
+ 0x4407000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrib", TILE_OPC_SHRIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000700a0000ULL,
+ 0x4005000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrib.sn", TILE_OPC_SHRIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000780a0000ULL,
+ 0x4405000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrih", TILE_OPC_SHRIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000700c0000ULL,
+ 0x4006000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "shrih.sn", TILE_OPC_SHRIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000780c0000ULL,
+ 0x4406000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slt", TILE_OPC_SLT, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000014c0000ULL,
+ 0x086a000000000000ULL,
+ 0x8000000028080000ULL,
+ 0xa804000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slt.sn", TILE_OPC_SLT_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000094c0000ULL,
+ 0x0c6a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slt_u", TILE_OPC_SLT_U, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001500000ULL,
+ 0x086c000000000000ULL,
+ 0x80000000280c0000ULL,
+ 0xa806000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slt_u.sn", TILE_OPC_SLT_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009500000ULL,
+ 0x0c6c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltb", TILE_OPC_SLTB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001240000ULL,
+ 0x0856000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltb.sn", TILE_OPC_SLTB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009240000ULL,
+ 0x0c56000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltb_u", TILE_OPC_SLTB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001280000ULL,
+ 0x0858000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltb_u.sn", TILE_OPC_SLTB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009280000ULL,
+ 0x0c58000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slte", TILE_OPC_SLTE, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000013c0000ULL,
+ 0x0862000000000000ULL,
+ 0x8000000028000000ULL,
+ 0xa800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slte.sn", TILE_OPC_SLTE_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000093c0000ULL,
+ 0x0c62000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slte_u", TILE_OPC_SLTE_U, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001400000ULL,
+ 0x0864000000000000ULL,
+ 0x8000000028040000ULL,
+ 0xa802000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slte_u.sn", TILE_OPC_SLTE_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009400000ULL,
+ 0x0c64000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteb", TILE_OPC_SLTEB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000012c0000ULL,
+ 0x085a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteb.sn", TILE_OPC_SLTEB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000092c0000ULL,
+ 0x0c5a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteb_u", TILE_OPC_SLTEB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001300000ULL,
+ 0x085c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteb_u.sn", TILE_OPC_SLTEB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009300000ULL,
+ 0x0c5c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteh", TILE_OPC_SLTEH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001340000ULL,
+ 0x085e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteh.sn", TILE_OPC_SLTEH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009340000ULL,
+ 0x0c5e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteh_u", TILE_OPC_SLTEH_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001380000ULL,
+ 0x0860000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slteh_u.sn", TILE_OPC_SLTEH_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009380000ULL,
+ 0x0c60000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slth", TILE_OPC_SLTH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001440000ULL,
+ 0x0866000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slth.sn", TILE_OPC_SLTH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009440000ULL,
+ 0x0c66000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slth_u", TILE_OPC_SLTH_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001480000ULL,
+ 0x0868000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slth_u.sn", TILE_OPC_SLTH_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009480000ULL,
+ 0x0c68000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slti", TILE_OPC_SLTI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000041000000ULL,
+ 0x3098000000000000ULL,
+ 0x8000000070000000ULL,
+ 0xe000000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slti.sn", TILE_OPC_SLTI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000049000000ULL,
+ 0x3498000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "slti_u", TILE_OPC_SLTI_U, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 11, 12, 2 },
+ { 13, 14, 3 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xf800000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000041100000ULL,
+ 0x30a0000000000000ULL,
+ 0x8000000078000000ULL,
+ 0xe800000000000000ULL,
+ -1ULL
+ }
+ },
+ { "slti_u.sn", TILE_OPC_SLTI_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000049100000ULL,
+ 0x34a0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltib", TILE_OPC_SLTIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040c00000ULL,
+ 0x3078000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltib.sn", TILE_OPC_SLTIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048c00000ULL,
+ 0x3478000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltib_u", TILE_OPC_SLTIB_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040d00000ULL,
+ 0x3080000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltib_u.sn", TILE_OPC_SLTIB_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048d00000ULL,
+ 0x3480000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltih", TILE_OPC_SLTIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040e00000ULL,
+ 0x3088000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltih.sn", TILE_OPC_SLTIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048e00000ULL,
+ 0x3488000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltih_u", TILE_OPC_SLTIH_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000040f00000ULL,
+ 0x3090000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sltih_u.sn", TILE_OPC_SLTIH_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000048f00000ULL,
+ 0x3490000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sne", TILE_OPC_SNE, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000015c0000ULL,
+ 0x0872000000000000ULL,
+ 0x80000000300c0000ULL,
+ 0xb006000000000000ULL,
+ -1ULL
+ }
+ },
+ { "sne.sn", TILE_OPC_SNE_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000095c0000ULL,
+ 0x0c72000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sneb", TILE_OPC_SNEB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001540000ULL,
+ 0x086e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sneb.sn", TILE_OPC_SNEB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009540000ULL,
+ 0x0c6e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sneh", TILE_OPC_SNEH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001580000ULL,
+ 0x0870000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sneh.sn", TILE_OPC_SNEH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009580000ULL,
+ 0x0c70000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sra", TILE_OPC_SRA, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001680000ULL,
+ 0x0878000000000000ULL,
+ 0x80000000200c0000ULL,
+ 0xa006000000000000ULL,
+ -1ULL
+ }
+ },
+ { "sra.sn", TILE_OPC_SRA_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009680000ULL,
+ 0x0c78000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "srab", TILE_OPC_SRAB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001600000ULL,
+ 0x0874000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "srab.sn", TILE_OPC_SRAB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009600000ULL,
+ 0x0c74000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "srah", TILE_OPC_SRAH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001640000ULL,
+ 0x0876000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "srah.sn", TILE_OPC_SRAH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009640000ULL,
+ 0x0c76000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "srai", TILE_OPC_SRAI, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 11, 12, 34 },
+ { 13, 14, 35 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0x80000000780e0000ULL,
+ 0xf807000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070140000ULL,
+ 0x400a000000000000ULL,
+ 0x8000000068080000ULL,
+ 0xd804000000000000ULL,
+ -1ULL
+ }
+ },
+ { "srai.sn", TILE_OPC_SRAI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078140000ULL,
+ 0x440a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sraib", TILE_OPC_SRAIB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070100000ULL,
+ 0x4008000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sraib.sn", TILE_OPC_SRAIB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078100000ULL,
+ 0x4408000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sraih", TILE_OPC_SRAIH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070120000ULL,
+ 0x4009000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sraih.sn", TILE_OPC_SRAIH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 32 },
+ { 9, 10, 33 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffe0000ULL,
+ 0xffff000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078120000ULL,
+ 0x4409000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sub", TILE_OPC_SUB, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001740000ULL,
+ 0x087e000000000000ULL,
+ 0x80000000080c0000ULL,
+ 0x8806000000000000ULL,
+ -1ULL
+ }
+ },
+ { "sub.sn", TILE_OPC_SUB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009740000ULL,
+ 0x0c7e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subb", TILE_OPC_SUBB, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000016c0000ULL,
+ 0x087a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subb.sn", TILE_OPC_SUBB_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x00000000096c0000ULL,
+ 0x0c7a000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subbs_u", TILE_OPC_SUBBS_U, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001900000ULL,
+ 0x088c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subbs_u.sn", TILE_OPC_SUBBS_U_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009900000ULL,
+ 0x0c8c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subh", TILE_OPC_SUBH, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001700000ULL,
+ 0x087c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subh.sn", TILE_OPC_SUBH_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009700000ULL,
+ 0x0c7c000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subhs", TILE_OPC_SUBHS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001940000ULL,
+ 0x088e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subhs.sn", TILE_OPC_SUBHS_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009940000ULL,
+ 0x0c8e000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subs", TILE_OPC_SUBS, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001840000ULL,
+ 0x0886000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "subs.sn", TILE_OPC_SUBS_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009840000ULL,
+ 0x0c86000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "sw", TILE_OPC_SW, 0x12 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10, 17 },
+ { 0, },
+ { 0, },
+ { 15, 36 }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0x8700000000000000ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x0880000000000000ULL,
+ -1ULL,
+ -1ULL,
+ 0x8700000000000000ULL
+ }
+ },
+ { "swadd", TILE_OPC_SWADD, 0x2 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 24, 17, 37 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbf8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x30f0000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "swint0", TILE_OPC_SWINT0, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b900000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "swint1", TILE_OPC_SWINT1, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400b980000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "swint2", TILE_OPC_SWINT2, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400ba00000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "swint3", TILE_OPC_SWINT3, 0x2 /* pipes */, 0 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 0, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400ba80000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb0", TILE_OPC_TBLIDXB0, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 31, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070168000ULL,
+ -1ULL,
+ 0x80000000680a8000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb0.sn", TILE_OPC_TBLIDXB0_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078168000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb1", TILE_OPC_TBLIDXB1, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 31, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000070169000ULL,
+ -1ULL,
+ 0x80000000680a9000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb1.sn", TILE_OPC_TBLIDXB1_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000078169000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb2", TILE_OPC_TBLIDXB2, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 31, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x000000007016a000ULL,
+ -1ULL,
+ 0x80000000680aa000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb2.sn", TILE_OPC_TBLIDXB2_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x000000007816a000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb3", TILE_OPC_TBLIDXB3, 0x5 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 31, 12 },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0x80000000780ff000ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x000000007016b000ULL,
+ -1ULL,
+ 0x80000000680ab000ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tblidxb3.sn", TILE_OPC_TBLIDXB3_SN, 0x1 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 21, 8 },
+ { 0, },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffff000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x000000007816b000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tns", TILE_OPC_TNS, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400bb00000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "tns.sn", TILE_OPC_TNS_SN, 0x2 /* pipes */, 2 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 9, 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfffff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x440bb00000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "wh64", TILE_OPC_WH64, 0x2 /* pipes */, 1 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 0, },
+ { 10 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0ULL,
+ 0xfbfff80000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ -1ULL,
+ 0x400bb80000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "xor", TILE_OPC_XOR, 0xf /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 11, 12, 18 },
+ { 13, 14, 19 },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0x80000000780c0000ULL,
+ 0xf806000000000000ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000001780000ULL,
+ 0x0882000000000000ULL,
+ 0x80000000180c0000ULL,
+ 0x9806000000000000ULL,
+ -1ULL
+ }
+ },
+ { "xor.sn", TILE_OPC_XOR_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 16 },
+ { 9, 10, 17 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ffc0000ULL,
+ 0xfffe000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000009780000ULL,
+ 0x0c82000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "xori", TILE_OPC_XORI, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_ZERO, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000050200000ULL,
+ 0x30a8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { "xori.sn", TILE_OPC_XORI_SN, 0x3 /* pipes */, 3 /* num_operands */,
+ TREG_SN, /* implicitly_written_register */
+ 1, /* can_bundle */
+ {
+ /* operands */
+ { 7, 8, 0 },
+ { 9, 10, 1 },
+ { 0, },
+ { 0, },
+ { 0, }
+ },
+ {
+ /* fixed_bit_masks */
+ 0x800000007ff00000ULL,
+ 0xfff8000000000000ULL,
+ 0ULL,
+ 0ULL,
+ 0ULL
+ },
+ {
+ /* fixed_bit_values */
+ 0x0000000058200000ULL,
+ 0x34a8000000000000ULL,
+ -1ULL,
+ -1ULL,
+ -1ULL
+ }
+ },
+ { 0, TILE_OPC_NONE, 0, 0, 0, TREG_ZERO, { { 0, } }, { 0, }, { 0, }
+ }
+};
+#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6))
+#define CHILD(array_index) (TILE_OPC_NONE + (array_index))
+
+static const unsigned short decode_X0_fsm[1153] =
+{
+ BITFIELD(22, 9) /* index 0 */,
+ CHILD(513), CHILD(530), CHILD(547), CHILD(564), CHILD(596), CHILD(613),
+ CHILD(630), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, CHILD(663), CHILD(680), CHILD(697), CHILD(714), CHILD(746),
+ CHILD(763), CHILD(780), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813), CHILD(813),
+ CHILD(813), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828),
+ CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(828), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(873), CHILD(878), CHILD(883),
+ CHILD(903), CHILD(908), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(913),
+ CHILD(918), CHILD(923), CHILD(943), CHILD(948), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, CHILD(953), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(988), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(993),
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, CHILD(1076), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(18, 4) /* index 513 */,
+ TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD,
+ TILE_OPC_ADIFFB_U, TILE_OPC_ADIFFH, TILE_OPC_AND, TILE_OPC_AVGB_U,
+ TILE_OPC_AVGH, TILE_OPC_CRC32_32, TILE_OPC_CRC32_8, TILE_OPC_INTHB,
+ TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH, TILE_OPC_MAXB_U,
+ BITFIELD(18, 4) /* index 530 */,
+ TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH, TILE_OPC_MNZB, TILE_OPC_MNZH,
+ TILE_OPC_MNZ, TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_SU, TILE_OPC_MULHHA_UU,
+ TILE_OPC_MULHHSA_UU, TILE_OPC_MULHH_SS, TILE_OPC_MULHH_SU,
+ TILE_OPC_MULHH_UU, TILE_OPC_MULHLA_SS, TILE_OPC_MULHLA_SU,
+ TILE_OPC_MULHLA_US,
+ BITFIELD(18, 4) /* index 547 */,
+ TILE_OPC_MULHLA_UU, TILE_OPC_MULHLSA_UU, TILE_OPC_MULHL_SS,
+ TILE_OPC_MULHL_SU, TILE_OPC_MULHL_US, TILE_OPC_MULHL_UU, TILE_OPC_MULLLA_SS,
+ TILE_OPC_MULLLA_SU, TILE_OPC_MULLLA_UU, TILE_OPC_MULLLSA_UU,
+ TILE_OPC_MULLL_SS, TILE_OPC_MULLL_SU, TILE_OPC_MULLL_UU, TILE_OPC_MVNZ,
+ TILE_OPC_MVZ, TILE_OPC_MZB,
+ BITFIELD(18, 4) /* index 564 */,
+ TILE_OPC_MZH, TILE_OPC_MZ, TILE_OPC_NOR, CHILD(581), TILE_OPC_PACKHB,
+ TILE_OPC_PACKLB, TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
+ TILE_OPC_SADAB_U, TILE_OPC_SADAH, TILE_OPC_SADAH_U, TILE_OPC_SADB_U,
+ TILE_OPC_SADH, TILE_OPC_SADH_U,
+ BITFIELD(12, 2) /* index 581 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(586),
+ BITFIELD(14, 2) /* index 586 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(591),
+ BITFIELD(16, 2) /* index 591 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+ BITFIELD(18, 4) /* index 596 */,
+ TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB, TILE_OPC_SHLH,
+ TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR, TILE_OPC_SLTB,
+ TILE_OPC_SLTB_U, TILE_OPC_SLTEB, TILE_OPC_SLTEB_U, TILE_OPC_SLTEH,
+ TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
+ BITFIELD(18, 4) /* index 613 */,
+ TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
+ TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
+ TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
+ TILE_OPC_XOR, TILE_OPC_DWORD_ALIGN,
+ BITFIELD(18, 3) /* index 630 */,
+ CHILD(639), CHILD(642), CHILD(645), CHILD(648), CHILD(651), CHILD(654),
+ CHILD(657), CHILD(660),
+ BITFIELD(21, 1) /* index 639 */,
+ TILE_OPC_ADDS, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 642 */,
+ TILE_OPC_SUBS, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 645 */,
+ TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 648 */,
+ TILE_OPC_ADDHS, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 651 */,
+ TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 654 */,
+ TILE_OPC_SUBHS, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 657 */,
+ TILE_OPC_PACKHS, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 660 */,
+ TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+ BITFIELD(18, 4) /* index 663 */,
+ TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
+ TILE_OPC_ADIFFB_U_SN, TILE_OPC_ADIFFH_SN, TILE_OPC_AND_SN,
+ TILE_OPC_AVGB_U_SN, TILE_OPC_AVGH_SN, TILE_OPC_CRC32_32_SN,
+ TILE_OPC_CRC32_8_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN,
+ TILE_OPC_INTLB_SN, TILE_OPC_INTLH_SN, TILE_OPC_MAXB_U_SN,
+ BITFIELD(18, 4) /* index 680 */,
+ TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN, TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN,
+ TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN, TILE_OPC_MULHHA_SS_SN,
+ TILE_OPC_MULHHA_SU_SN, TILE_OPC_MULHHA_UU_SN, TILE_OPC_MULHHSA_UU_SN,
+ TILE_OPC_MULHH_SS_SN, TILE_OPC_MULHH_SU_SN, TILE_OPC_MULHH_UU_SN,
+ TILE_OPC_MULHLA_SS_SN, TILE_OPC_MULHLA_SU_SN, TILE_OPC_MULHLA_US_SN,
+ BITFIELD(18, 4) /* index 697 */,
+ TILE_OPC_MULHLA_UU_SN, TILE_OPC_MULHLSA_UU_SN, TILE_OPC_MULHL_SS_SN,
+ TILE_OPC_MULHL_SU_SN, TILE_OPC_MULHL_US_SN, TILE_OPC_MULHL_UU_SN,
+ TILE_OPC_MULLLA_SS_SN, TILE_OPC_MULLLA_SU_SN, TILE_OPC_MULLLA_UU_SN,
+ TILE_OPC_MULLLSA_UU_SN, TILE_OPC_MULLL_SS_SN, TILE_OPC_MULLL_SU_SN,
+ TILE_OPC_MULLL_UU_SN, TILE_OPC_MVNZ_SN, TILE_OPC_MVZ_SN, TILE_OPC_MZB_SN,
+ BITFIELD(18, 4) /* index 714 */,
+ TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN, CHILD(731),
+ TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN, TILE_OPC_S1A_SN,
+ TILE_OPC_S2A_SN, TILE_OPC_S3A_SN, TILE_OPC_SADAB_U_SN, TILE_OPC_SADAH_SN,
+ TILE_OPC_SADAH_U_SN, TILE_OPC_SADB_U_SN, TILE_OPC_SADH_SN,
+ TILE_OPC_SADH_U_SN,
+ BITFIELD(12, 2) /* index 731 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(736),
+ BITFIELD(14, 2) /* index 736 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(741),
+ BITFIELD(16, 2) /* index 741 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+ BITFIELD(18, 4) /* index 746 */,
+ TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN, TILE_OPC_SHLB_SN,
+ TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN, TILE_OPC_SHRH_SN,
+ TILE_OPC_SHR_SN, TILE_OPC_SLTB_SN, TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN,
+ TILE_OPC_SLTEB_U_SN, TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN,
+ TILE_OPC_SLTE_SN,
+ BITFIELD(18, 4) /* index 763 */,
+ TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
+ TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
+ TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
+ TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN, TILE_OPC_XOR_SN, TILE_OPC_DWORD_ALIGN_SN,
+ BITFIELD(18, 3) /* index 780 */,
+ CHILD(789), CHILD(792), CHILD(795), CHILD(798), CHILD(801), CHILD(804),
+ CHILD(807), CHILD(810),
+ BITFIELD(21, 1) /* index 789 */,
+ TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 792 */,
+ TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 795 */,
+ TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 798 */,
+ TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 801 */,
+ TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 804 */,
+ TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 807 */,
+ TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+ BITFIELD(21, 1) /* index 810 */,
+ TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(6, 2) /* index 813 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(818),
+ BITFIELD(8, 2) /* index 818 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(823),
+ BITFIELD(10, 2) /* index 823 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+ BITFIELD(6, 2) /* index 828 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(833),
+ BITFIELD(8, 2) /* index 833 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(838),
+ BITFIELD(10, 2) /* index 838 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+ BITFIELD(0, 2) /* index 843 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(848),
+ BITFIELD(2, 2) /* index 848 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(853),
+ BITFIELD(4, 2) /* index 853 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(858),
+ BITFIELD(6, 2) /* index 858 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(863),
+ BITFIELD(8, 2) /* index 863 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(868),
+ BITFIELD(10, 2) /* index 868 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+ BITFIELD(20, 2) /* index 873 */,
+ TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI,
+ BITFIELD(20, 2) /* index 878 */,
+ TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MINIB_U, TILE_OPC_MINIH,
+ BITFIELD(20, 2) /* index 883 */,
+ CHILD(888), TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI,
+ BITFIELD(6, 2) /* index 888 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(893),
+ BITFIELD(8, 2) /* index 893 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(898),
+ BITFIELD(10, 2) /* index 898 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+ BITFIELD(20, 2) /* index 903 */,
+ TILE_OPC_SLTIB, TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U,
+ BITFIELD(20, 2) /* index 908 */,
+ TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(20, 2) /* index 913 */,
+ TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
+ BITFIELD(20, 2) /* index 918 */,
+ TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MINIB_U_SN,
+ TILE_OPC_MINIH_SN,
+ BITFIELD(20, 2) /* index 923 */,
+ CHILD(928), TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN,
+ BITFIELD(6, 2) /* index 928 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(933),
+ BITFIELD(8, 2) /* index 933 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(938),
+ BITFIELD(10, 2) /* index 938 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+ BITFIELD(20, 2) /* index 943 */,
+ TILE_OPC_SLTIB_SN, TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN,
+ TILE_OPC_SLTIH_U_SN,
+ BITFIELD(20, 2) /* index 948 */,
+ TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(20, 2) /* index 953 */,
+ TILE_OPC_NONE, CHILD(958), TILE_OPC_XORI, TILE_OPC_NONE,
+ BITFIELD(0, 2) /* index 958 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(963),
+ BITFIELD(2, 2) /* index 963 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(968),
+ BITFIELD(4, 2) /* index 968 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(973),
+ BITFIELD(6, 2) /* index 973 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(978),
+ BITFIELD(8, 2) /* index 978 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(983),
+ BITFIELD(10, 2) /* index 983 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+ BITFIELD(20, 2) /* index 988 */,
+ TILE_OPC_NONE, TILE_OPC_ANDI_SN, TILE_OPC_XORI_SN, TILE_OPC_NONE,
+ BITFIELD(17, 5) /* index 993 */,
+ TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLIB, TILE_OPC_SHLIH, TILE_OPC_SHLI,
+ TILE_OPC_SHRIB, TILE_OPC_SHRIH, TILE_OPC_SHRI, TILE_OPC_SRAIB,
+ TILE_OPC_SRAIH, TILE_OPC_SRAI, CHILD(1026), TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(12, 4) /* index 1026 */,
+ TILE_OPC_NONE, CHILD(1043), CHILD(1046), CHILD(1049), CHILD(1052),
+ CHILD(1055), CHILD(1058), CHILD(1061), CHILD(1064), CHILD(1067),
+ CHILD(1070), CHILD(1073), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1043 */,
+ TILE_OPC_BITX, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1046 */,
+ TILE_OPC_BYTEX, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1049 */,
+ TILE_OPC_CLZ, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1052 */,
+ TILE_OPC_CTZ, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1055 */,
+ TILE_OPC_FNOP, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1058 */,
+ TILE_OPC_NOP, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1061 */,
+ TILE_OPC_PCNT, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1064 */,
+ TILE_OPC_TBLIDXB0, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1067 */,
+ TILE_OPC_TBLIDXB1, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1070 */,
+ TILE_OPC_TBLIDXB2, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1073 */,
+ TILE_OPC_TBLIDXB3, TILE_OPC_NONE,
+ BITFIELD(17, 5) /* index 1076 */,
+ TILE_OPC_NONE, TILE_OPC_RLI_SN, TILE_OPC_SHLIB_SN, TILE_OPC_SHLIH_SN,
+ TILE_OPC_SHLI_SN, TILE_OPC_SHRIB_SN, TILE_OPC_SHRIH_SN, TILE_OPC_SHRI_SN,
+ TILE_OPC_SRAIB_SN, TILE_OPC_SRAIH_SN, TILE_OPC_SRAI_SN, CHILD(1109),
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(12, 4) /* index 1109 */,
+ TILE_OPC_NONE, CHILD(1126), CHILD(1129), CHILD(1132), CHILD(1135),
+ CHILD(1055), CHILD(1058), CHILD(1138), CHILD(1141), CHILD(1144),
+ CHILD(1147), CHILD(1150), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1126 */,
+ TILE_OPC_BITX_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1129 */,
+ TILE_OPC_BYTEX_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1132 */,
+ TILE_OPC_CLZ_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1135 */,
+ TILE_OPC_CTZ_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1138 */,
+ TILE_OPC_PCNT_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1141 */,
+ TILE_OPC_TBLIDXB0_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1144 */,
+ TILE_OPC_TBLIDXB1_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1147 */,
+ TILE_OPC_TBLIDXB2_SN, TILE_OPC_NONE,
+ BITFIELD(16, 1) /* index 1150 */,
+ TILE_OPC_TBLIDXB3_SN, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_X1_fsm[1509] =
+{
+ BITFIELD(54, 9) /* index 0 */,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, CHILD(513), CHILD(561), CHILD(594),
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(641), CHILD(689),
+ CHILD(722), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(766),
+ CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+ CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+ CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+ CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+ CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766), CHILD(766),
+ CHILD(766), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+ CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+ CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+ CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+ CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781), CHILD(781),
+ CHILD(781), CHILD(781), CHILD(781), CHILD(796), CHILD(796), CHILD(796),
+ CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+ CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+ CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+ CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796),
+ CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(796), CHILD(826),
+ CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826),
+ CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826), CHILD(826),
+ CHILD(826), CHILD(826), CHILD(826), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843), CHILD(843),
+ CHILD(843), CHILD(860), CHILD(899), CHILD(923), CHILD(932), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, CHILD(941), CHILD(950), CHILD(974), CHILD(983),
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM,
+ TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, TILE_OPC_MM, CHILD(992),
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ CHILD(1303), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J, TILE_OPC_J,
+ TILE_OPC_J, TILE_OPC_J, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL, TILE_OPC_JAL,
+ TILE_OPC_JAL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(49, 5) /* index 513 */,
+ TILE_OPC_NONE, TILE_OPC_ADDB, TILE_OPC_ADDH, TILE_OPC_ADD, TILE_OPC_AND,
+ TILE_OPC_INTHB, TILE_OPC_INTHH, TILE_OPC_INTLB, TILE_OPC_INTLH,
+ TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR, TILE_OPC_LNK,
+ TILE_OPC_MAXB_U, TILE_OPC_MAXH, TILE_OPC_MINB_U, TILE_OPC_MINH,
+ TILE_OPC_MNZB, TILE_OPC_MNZH, TILE_OPC_MNZ, TILE_OPC_MZB, TILE_OPC_MZH,
+ TILE_OPC_MZ, TILE_OPC_NOR, CHILD(546), TILE_OPC_PACKHB, TILE_OPC_PACKLB,
+ TILE_OPC_RL, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_S3A,
+ BITFIELD(43, 2) /* index 546 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(551),
+ BITFIELD(45, 2) /* index 551 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(556),
+ BITFIELD(47, 2) /* index 556 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+ BITFIELD(49, 5) /* index 561 */,
+ TILE_OPC_SB, TILE_OPC_SEQB, TILE_OPC_SEQH, TILE_OPC_SEQ, TILE_OPC_SHLB,
+ TILE_OPC_SHLH, TILE_OPC_SHL, TILE_OPC_SHRB, TILE_OPC_SHRH, TILE_OPC_SHR,
+ TILE_OPC_SH, TILE_OPC_SLTB, TILE_OPC_SLTB_U, TILE_OPC_SLTEB,
+ TILE_OPC_SLTEB_U, TILE_OPC_SLTEH, TILE_OPC_SLTEH_U, TILE_OPC_SLTE,
+ TILE_OPC_SLTE_U, TILE_OPC_SLTH, TILE_OPC_SLTH_U, TILE_OPC_SLT,
+ TILE_OPC_SLT_U, TILE_OPC_SNEB, TILE_OPC_SNEH, TILE_OPC_SNE, TILE_OPC_SRAB,
+ TILE_OPC_SRAH, TILE_OPC_SRA, TILE_OPC_SUBB, TILE_OPC_SUBH, TILE_OPC_SUB,
+ BITFIELD(49, 4) /* index 594 */,
+ CHILD(611), CHILD(614), CHILD(617), CHILD(620), CHILD(623), CHILD(626),
+ CHILD(629), CHILD(632), CHILD(635), CHILD(638), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 611 */,
+ TILE_OPC_SW, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 614 */,
+ TILE_OPC_XOR, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 617 */,
+ TILE_OPC_ADDS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 620 */,
+ TILE_OPC_SUBS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 623 */,
+ TILE_OPC_ADDBS_U, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 626 */,
+ TILE_OPC_ADDHS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 629 */,
+ TILE_OPC_SUBBS_U, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 632 */,
+ TILE_OPC_SUBHS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 635 */,
+ TILE_OPC_PACKHS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 638 */,
+ TILE_OPC_PACKBS_U, TILE_OPC_NONE,
+ BITFIELD(49, 5) /* index 641 */,
+ TILE_OPC_NONE, TILE_OPC_ADDB_SN, TILE_OPC_ADDH_SN, TILE_OPC_ADD_SN,
+ TILE_OPC_AND_SN, TILE_OPC_INTHB_SN, TILE_OPC_INTHH_SN, TILE_OPC_INTLB_SN,
+ TILE_OPC_INTLH_SN, TILE_OPC_JALRP, TILE_OPC_JALR, TILE_OPC_JRP, TILE_OPC_JR,
+ TILE_OPC_LNK_SN, TILE_OPC_MAXB_U_SN, TILE_OPC_MAXH_SN, TILE_OPC_MINB_U_SN,
+ TILE_OPC_MINH_SN, TILE_OPC_MNZB_SN, TILE_OPC_MNZH_SN, TILE_OPC_MNZ_SN,
+ TILE_OPC_MZB_SN, TILE_OPC_MZH_SN, TILE_OPC_MZ_SN, TILE_OPC_NOR_SN,
+ CHILD(674), TILE_OPC_PACKHB_SN, TILE_OPC_PACKLB_SN, TILE_OPC_RL_SN,
+ TILE_OPC_S1A_SN, TILE_OPC_S2A_SN, TILE_OPC_S3A_SN,
+ BITFIELD(43, 2) /* index 674 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(679),
+ BITFIELD(45, 2) /* index 679 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, CHILD(684),
+ BITFIELD(47, 2) /* index 684 */,
+ TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_OR_SN, TILE_OPC_MOVE_SN,
+ BITFIELD(49, 5) /* index 689 */,
+ TILE_OPC_SB, TILE_OPC_SEQB_SN, TILE_OPC_SEQH_SN, TILE_OPC_SEQ_SN,
+ TILE_OPC_SHLB_SN, TILE_OPC_SHLH_SN, TILE_OPC_SHL_SN, TILE_OPC_SHRB_SN,
+ TILE_OPC_SHRH_SN, TILE_OPC_SHR_SN, TILE_OPC_SH, TILE_OPC_SLTB_SN,
+ TILE_OPC_SLTB_U_SN, TILE_OPC_SLTEB_SN, TILE_OPC_SLTEB_U_SN,
+ TILE_OPC_SLTEH_SN, TILE_OPC_SLTEH_U_SN, TILE_OPC_SLTE_SN,
+ TILE_OPC_SLTE_U_SN, TILE_OPC_SLTH_SN, TILE_OPC_SLTH_U_SN, TILE_OPC_SLT_SN,
+ TILE_OPC_SLT_U_SN, TILE_OPC_SNEB_SN, TILE_OPC_SNEH_SN, TILE_OPC_SNE_SN,
+ TILE_OPC_SRAB_SN, TILE_OPC_SRAH_SN, TILE_OPC_SRA_SN, TILE_OPC_SUBB_SN,
+ TILE_OPC_SUBH_SN, TILE_OPC_SUB_SN,
+ BITFIELD(49, 4) /* index 722 */,
+ CHILD(611), CHILD(739), CHILD(742), CHILD(745), CHILD(748), CHILD(751),
+ CHILD(754), CHILD(757), CHILD(760), CHILD(763), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 739 */,
+ TILE_OPC_XOR_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 742 */,
+ TILE_OPC_ADDS_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 745 */,
+ TILE_OPC_SUBS_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 748 */,
+ TILE_OPC_ADDBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 751 */,
+ TILE_OPC_ADDHS_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 754 */,
+ TILE_OPC_SUBBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 757 */,
+ TILE_OPC_SUBHS_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 760 */,
+ TILE_OPC_PACKHS_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 763 */,
+ TILE_OPC_PACKBS_U_SN, TILE_OPC_NONE,
+ BITFIELD(37, 2) /* index 766 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(771),
+ BITFIELD(39, 2) /* index 771 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, CHILD(776),
+ BITFIELD(41, 2) /* index 776 */,
+ TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_ADDLI_SN, TILE_OPC_MOVELI_SN,
+ BITFIELD(37, 2) /* index 781 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(786),
+ BITFIELD(39, 2) /* index 786 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, CHILD(791),
+ BITFIELD(41, 2) /* index 791 */,
+ TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_ADDLI, TILE_OPC_MOVELI,
+ BITFIELD(31, 2) /* index 796 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(801),
+ BITFIELD(33, 2) /* index 801 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(806),
+ BITFIELD(35, 2) /* index 806 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(811),
+ BITFIELD(37, 2) /* index 811 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(816),
+ BITFIELD(39, 2) /* index 816 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, CHILD(821),
+ BITFIELD(41, 2) /* index 821 */,
+ TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_AULI, TILE_OPC_INFOL,
+ BITFIELD(31, 4) /* index 826 */,
+ TILE_OPC_BZ, TILE_OPC_BZT, TILE_OPC_BNZ, TILE_OPC_BNZT, TILE_OPC_BGZ,
+ TILE_OPC_BGZT, TILE_OPC_BGEZ, TILE_OPC_BGEZT, TILE_OPC_BLZ, TILE_OPC_BLZT,
+ TILE_OPC_BLEZ, TILE_OPC_BLEZT, TILE_OPC_BBS, TILE_OPC_BBST, TILE_OPC_BBNS,
+ TILE_OPC_BBNST,
+ BITFIELD(31, 4) /* index 843 */,
+ TILE_OPC_BZ_SN, TILE_OPC_BZT_SN, TILE_OPC_BNZ_SN, TILE_OPC_BNZT_SN,
+ TILE_OPC_BGZ_SN, TILE_OPC_BGZT_SN, TILE_OPC_BGEZ_SN, TILE_OPC_BGEZT_SN,
+ TILE_OPC_BLZ_SN, TILE_OPC_BLZT_SN, TILE_OPC_BLEZ_SN, TILE_OPC_BLEZT_SN,
+ TILE_OPC_BBS_SN, TILE_OPC_BBST_SN, TILE_OPC_BBNS_SN, TILE_OPC_BBNST_SN,
+ BITFIELD(51, 3) /* index 860 */,
+ TILE_OPC_NONE, TILE_OPC_ADDIB, TILE_OPC_ADDIH, TILE_OPC_ADDI, CHILD(869),
+ TILE_OPC_MAXIB_U, TILE_OPC_MAXIH, TILE_OPC_MFSPR,
+ BITFIELD(31, 2) /* index 869 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(874),
+ BITFIELD(33, 2) /* index 874 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(879),
+ BITFIELD(35, 2) /* index 879 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(884),
+ BITFIELD(37, 2) /* index 884 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(889),
+ BITFIELD(39, 2) /* index 889 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(894),
+ BITFIELD(41, 2) /* index 894 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+ BITFIELD(51, 3) /* index 899 */,
+ TILE_OPC_MINIB_U, TILE_OPC_MINIH, TILE_OPC_MTSPR, CHILD(908),
+ TILE_OPC_SEQIB, TILE_OPC_SEQIH, TILE_OPC_SEQI, TILE_OPC_SLTIB,
+ BITFIELD(37, 2) /* index 908 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(913),
+ BITFIELD(39, 2) /* index 913 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(918),
+ BITFIELD(41, 2) /* index 918 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+ BITFIELD(51, 3) /* index 923 */,
+ TILE_OPC_SLTIB_U, TILE_OPC_SLTIH, TILE_OPC_SLTIH_U, TILE_OPC_SLTI,
+ TILE_OPC_SLTI_U, TILE_OPC_XORI, TILE_OPC_LBADD, TILE_OPC_LBADD_U,
+ BITFIELD(51, 3) /* index 932 */,
+ TILE_OPC_LHADD, TILE_OPC_LHADD_U, TILE_OPC_LWADD, TILE_OPC_LWADD_NA,
+ TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD, TILE_OPC_NONE,
+ BITFIELD(51, 3) /* index 941 */,
+ TILE_OPC_NONE, TILE_OPC_ADDIB_SN, TILE_OPC_ADDIH_SN, TILE_OPC_ADDI_SN,
+ TILE_OPC_ANDI_SN, TILE_OPC_MAXIB_U_SN, TILE_OPC_MAXIH_SN, TILE_OPC_MFSPR,
+ BITFIELD(51, 3) /* index 950 */,
+ TILE_OPC_MINIB_U_SN, TILE_OPC_MINIH_SN, TILE_OPC_MTSPR, CHILD(959),
+ TILE_OPC_SEQIB_SN, TILE_OPC_SEQIH_SN, TILE_OPC_SEQI_SN, TILE_OPC_SLTIB_SN,
+ BITFIELD(37, 2) /* index 959 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(964),
+ BITFIELD(39, 2) /* index 964 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, CHILD(969),
+ BITFIELD(41, 2) /* index 969 */,
+ TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_ORI_SN, TILE_OPC_MOVEI_SN,
+ BITFIELD(51, 3) /* index 974 */,
+ TILE_OPC_SLTIB_U_SN, TILE_OPC_SLTIH_SN, TILE_OPC_SLTIH_U_SN,
+ TILE_OPC_SLTI_SN, TILE_OPC_SLTI_U_SN, TILE_OPC_XORI_SN, TILE_OPC_LBADD_SN,
+ TILE_OPC_LBADD_U_SN,
+ BITFIELD(51, 3) /* index 983 */,
+ TILE_OPC_LHADD_SN, TILE_OPC_LHADD_U_SN, TILE_OPC_LWADD_SN,
+ TILE_OPC_LWADD_NA_SN, TILE_OPC_SBADD, TILE_OPC_SHADD, TILE_OPC_SWADD,
+ TILE_OPC_NONE,
+ BITFIELD(46, 7) /* index 992 */,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1121),
+ CHILD(1121), CHILD(1121), CHILD(1121), CHILD(1124), CHILD(1124),
+ CHILD(1124), CHILD(1124), CHILD(1127), CHILD(1127), CHILD(1127),
+ CHILD(1127), CHILD(1130), CHILD(1130), CHILD(1130), CHILD(1130),
+ CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1133), CHILD(1136),
+ CHILD(1136), CHILD(1136), CHILD(1136), CHILD(1139), CHILD(1139),
+ CHILD(1139), CHILD(1139), CHILD(1142), CHILD(1142), CHILD(1142),
+ CHILD(1142), CHILD(1145), CHILD(1145), CHILD(1145), CHILD(1145),
+ CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1148), CHILD(1151),
+ CHILD(1211), CHILD(1259), CHILD(1292), TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1121 */,
+ TILE_OPC_RLI, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1124 */,
+ TILE_OPC_SHLIB, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1127 */,
+ TILE_OPC_SHLIH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1130 */,
+ TILE_OPC_SHLI, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1133 */,
+ TILE_OPC_SHRIB, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1136 */,
+ TILE_OPC_SHRIH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1139 */,
+ TILE_OPC_SHRI, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1142 */,
+ TILE_OPC_SRAIB, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1145 */,
+ TILE_OPC_SRAIH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1148 */,
+ TILE_OPC_SRAI, TILE_OPC_NONE,
+ BITFIELD(43, 3) /* index 1151 */,
+ TILE_OPC_NONE, CHILD(1160), CHILD(1163), CHILD(1166), CHILD(1169),
+ CHILD(1172), CHILD(1175), CHILD(1178),
+ BITFIELD(53, 1) /* index 1160 */,
+ TILE_OPC_DRAIN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1163 */,
+ TILE_OPC_DTLBPR, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1166 */,
+ TILE_OPC_FINV, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1169 */,
+ TILE_OPC_FLUSH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1172 */,
+ TILE_OPC_FNOP, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1175 */,
+ TILE_OPC_ICOH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1178 */,
+ CHILD(1181), TILE_OPC_NONE,
+ BITFIELD(31, 2) /* index 1181 */,
+ CHILD(1186), TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL,
+ BITFIELD(33, 2) /* index 1186 */,
+ TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_ILL, CHILD(1191),
+ BITFIELD(35, 2) /* index 1191 */,
+ TILE_OPC_ILL, CHILD(1196), TILE_OPC_ILL, TILE_OPC_ILL,
+ BITFIELD(37, 2) /* index 1196 */,
+ TILE_OPC_ILL, CHILD(1201), TILE_OPC_ILL, TILE_OPC_ILL,
+ BITFIELD(39, 2) /* index 1201 */,
+ TILE_OPC_ILL, CHILD(1206), TILE_OPC_ILL, TILE_OPC_ILL,
+ BITFIELD(41, 2) /* index 1206 */,
+ TILE_OPC_ILL, TILE_OPC_ILL, TILE_OPC_BPT, TILE_OPC_ILL,
+ BITFIELD(43, 3) /* index 1211 */,
+ CHILD(1220), CHILD(1223), CHILD(1226), CHILD(1244), CHILD(1247),
+ CHILD(1250), CHILD(1253), CHILD(1256),
+ BITFIELD(53, 1) /* index 1220 */,
+ TILE_OPC_INV, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1223 */,
+ TILE_OPC_IRET, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1226 */,
+ CHILD(1229), TILE_OPC_NONE,
+ BITFIELD(31, 2) /* index 1229 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1234),
+ BITFIELD(33, 2) /* index 1234 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(1239),
+ BITFIELD(35, 2) /* index 1239 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+ BITFIELD(53, 1) /* index 1244 */,
+ TILE_OPC_LB_U, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1247 */,
+ TILE_OPC_LH, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1250 */,
+ TILE_OPC_LH_U, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1253 */,
+ TILE_OPC_LW, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1256 */,
+ TILE_OPC_MF, TILE_OPC_NONE,
+ BITFIELD(43, 3) /* index 1259 */,
+ CHILD(1268), CHILD(1271), CHILD(1274), CHILD(1277), CHILD(1280),
+ CHILD(1283), CHILD(1286), CHILD(1289),
+ BITFIELD(53, 1) /* index 1268 */,
+ TILE_OPC_NAP, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1271 */,
+ TILE_OPC_NOP, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1274 */,
+ TILE_OPC_SWINT0, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1277 */,
+ TILE_OPC_SWINT1, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1280 */,
+ TILE_OPC_SWINT2, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1283 */,
+ TILE_OPC_SWINT3, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1286 */,
+ TILE_OPC_TNS, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1289 */,
+ TILE_OPC_WH64, TILE_OPC_NONE,
+ BITFIELD(43, 2) /* index 1292 */,
+ CHILD(1297), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(45, 1) /* index 1297 */,
+ CHILD(1300), TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1300 */,
+ TILE_OPC_LW_NA, TILE_OPC_NONE,
+ BITFIELD(46, 7) /* index 1303 */,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, CHILD(1432),
+ CHILD(1432), CHILD(1432), CHILD(1432), CHILD(1435), CHILD(1435),
+ CHILD(1435), CHILD(1435), CHILD(1438), CHILD(1438), CHILD(1438),
+ CHILD(1438), CHILD(1441), CHILD(1441), CHILD(1441), CHILD(1441),
+ CHILD(1444), CHILD(1444), CHILD(1444), CHILD(1444), CHILD(1447),
+ CHILD(1447), CHILD(1447), CHILD(1447), CHILD(1450), CHILD(1450),
+ CHILD(1450), CHILD(1450), CHILD(1453), CHILD(1453), CHILD(1453),
+ CHILD(1453), CHILD(1456), CHILD(1456), CHILD(1456), CHILD(1456),
+ CHILD(1459), CHILD(1459), CHILD(1459), CHILD(1459), CHILD(1151),
+ CHILD(1462), CHILD(1486), CHILD(1498), TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1432 */,
+ TILE_OPC_RLI_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1435 */,
+ TILE_OPC_SHLIB_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1438 */,
+ TILE_OPC_SHLIH_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1441 */,
+ TILE_OPC_SHLI_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1444 */,
+ TILE_OPC_SHRIB_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1447 */,
+ TILE_OPC_SHRIH_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1450 */,
+ TILE_OPC_SHRI_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1453 */,
+ TILE_OPC_SRAIB_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1456 */,
+ TILE_OPC_SRAIH_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1459 */,
+ TILE_OPC_SRAI_SN, TILE_OPC_NONE,
+ BITFIELD(43, 3) /* index 1462 */,
+ CHILD(1220), CHILD(1223), CHILD(1471), CHILD(1474), CHILD(1477),
+ CHILD(1480), CHILD(1483), CHILD(1256),
+ BITFIELD(53, 1) /* index 1471 */,
+ TILE_OPC_LB_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1474 */,
+ TILE_OPC_LB_U_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1477 */,
+ TILE_OPC_LH_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1480 */,
+ TILE_OPC_LH_U_SN, TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1483 */,
+ TILE_OPC_LW_SN, TILE_OPC_NONE,
+ BITFIELD(43, 3) /* index 1486 */,
+ CHILD(1268), CHILD(1271), CHILD(1274), CHILD(1277), CHILD(1280),
+ CHILD(1283), CHILD(1495), CHILD(1289),
+ BITFIELD(53, 1) /* index 1495 */,
+ TILE_OPC_TNS_SN, TILE_OPC_NONE,
+ BITFIELD(43, 2) /* index 1498 */,
+ CHILD(1503), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(45, 1) /* index 1503 */,
+ CHILD(1506), TILE_OPC_NONE,
+ BITFIELD(53, 1) /* index 1506 */,
+ TILE_OPC_LW_NA_SN, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y0_fsm[168] =
+{
+ BITFIELD(27, 4) /* index 0 */,
+ TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+ CHILD(57), CHILD(62), CHILD(67), TILE_OPC_ADDI, CHILD(72), CHILD(102),
+ TILE_OPC_SEQI, CHILD(117), TILE_OPC_SLTI, TILE_OPC_SLTI_U,
+ BITFIELD(18, 2) /* index 17 */,
+ TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+ BITFIELD(18, 2) /* index 22 */,
+ TILE_OPC_MNZ, TILE_OPC_MVNZ, TILE_OPC_MVZ, TILE_OPC_MZ,
+ BITFIELD(18, 2) /* index 27 */,
+ TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+ BITFIELD(12, 2) /* index 32 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+ BITFIELD(14, 2) /* index 37 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+ BITFIELD(16, 2) /* index 42 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+ BITFIELD(18, 2) /* index 47 */,
+ TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+ BITFIELD(18, 2) /* index 52 */,
+ TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+ BITFIELD(18, 2) /* index 57 */,
+ TILE_OPC_MULHLSA_UU, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+ BITFIELD(18, 2) /* index 62 */,
+ TILE_OPC_MULHH_SS, TILE_OPC_MULHH_UU, TILE_OPC_MULLL_SS, TILE_OPC_MULLL_UU,
+ BITFIELD(18, 2) /* index 67 */,
+ TILE_OPC_MULHHA_SS, TILE_OPC_MULHHA_UU, TILE_OPC_MULLLA_SS,
+ TILE_OPC_MULLLA_UU,
+ BITFIELD(0, 2) /* index 72 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+ BITFIELD(2, 2) /* index 77 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+ BITFIELD(4, 2) /* index 82 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+ BITFIELD(6, 2) /* index 87 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(92),
+ BITFIELD(8, 2) /* index 92 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(97),
+ BITFIELD(10, 2) /* index 97 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+ BITFIELD(6, 2) /* index 102 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(107),
+ BITFIELD(8, 2) /* index 107 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(112),
+ BITFIELD(10, 2) /* index 112 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+ BITFIELD(15, 5) /* index 117 */,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_RLI,
+ TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHLI,
+ TILE_OPC_SHLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SHRI, TILE_OPC_SHRI,
+ TILE_OPC_SHRI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI, TILE_OPC_SRAI,
+ CHILD(150), CHILD(159), TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(12, 3) /* index 150 */,
+ TILE_OPC_NONE, TILE_OPC_BITX, TILE_OPC_BYTEX, TILE_OPC_CLZ, TILE_OPC_CTZ,
+ TILE_OPC_FNOP, TILE_OPC_NOP, TILE_OPC_PCNT,
+ BITFIELD(12, 3) /* index 159 */,
+ TILE_OPC_TBLIDXB0, TILE_OPC_TBLIDXB1, TILE_OPC_TBLIDXB2, TILE_OPC_TBLIDXB3,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y1_fsm[140] =
+{
+ BITFIELD(59, 4) /* index 0 */,
+ TILE_OPC_NONE, CHILD(17), CHILD(22), CHILD(27), CHILD(47), CHILD(52),
+ CHILD(57), TILE_OPC_ADDI, CHILD(62), CHILD(92), TILE_OPC_SEQI, CHILD(107),
+ TILE_OPC_SLTI, TILE_OPC_SLTI_U, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(49, 2) /* index 17 */,
+ TILE_OPC_ADD, TILE_OPC_S1A, TILE_OPC_S2A, TILE_OPC_SUB,
+ BITFIELD(49, 2) /* index 22 */,
+ TILE_OPC_NONE, TILE_OPC_MNZ, TILE_OPC_MZ, TILE_OPC_NONE,
+ BITFIELD(49, 2) /* index 27 */,
+ TILE_OPC_AND, TILE_OPC_NOR, CHILD(32), TILE_OPC_XOR,
+ BITFIELD(43, 2) /* index 32 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(37),
+ BITFIELD(45, 2) /* index 37 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, CHILD(42),
+ BITFIELD(47, 2) /* index 42 */,
+ TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_OR, TILE_OPC_MOVE,
+ BITFIELD(49, 2) /* index 47 */,
+ TILE_OPC_RL, TILE_OPC_SHL, TILE_OPC_SHR, TILE_OPC_SRA,
+ BITFIELD(49, 2) /* index 52 */,
+ TILE_OPC_SLTE, TILE_OPC_SLTE_U, TILE_OPC_SLT, TILE_OPC_SLT_U,
+ BITFIELD(49, 2) /* index 57 */,
+ TILE_OPC_NONE, TILE_OPC_S3A, TILE_OPC_SEQ, TILE_OPC_SNE,
+ BITFIELD(31, 2) /* index 62 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(67),
+ BITFIELD(33, 2) /* index 67 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(72),
+ BITFIELD(35, 2) /* index 72 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(77),
+ BITFIELD(37, 2) /* index 77 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(82),
+ BITFIELD(39, 2) /* index 82 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, CHILD(87),
+ BITFIELD(41, 2) /* index 87 */,
+ TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_ANDI, TILE_OPC_INFO,
+ BITFIELD(37, 2) /* index 92 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(97),
+ BITFIELD(39, 2) /* index 97 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, CHILD(102),
+ BITFIELD(41, 2) /* index 102 */,
+ TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_ORI, TILE_OPC_MOVEI,
+ BITFIELD(48, 3) /* index 107 */,
+ TILE_OPC_NONE, TILE_OPC_RLI, TILE_OPC_SHLI, TILE_OPC_SHRI, TILE_OPC_SRAI,
+ CHILD(116), TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(43, 3) /* index 116 */,
+ TILE_OPC_NONE, CHILD(125), CHILD(130), CHILD(135), TILE_OPC_NONE,
+ TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(46, 2) /* index 125 */,
+ TILE_OPC_FNOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(46, 2) /* index 130 */,
+ TILE_OPC_ILL, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+ BITFIELD(46, 2) /* index 135 */,
+ TILE_OPC_NOP, TILE_OPC_NONE, TILE_OPC_NONE, TILE_OPC_NONE,
+};
+
+static const unsigned short decode_Y2_fsm[24] =
+{
+ BITFIELD(56, 3) /* index 0 */,
+ CHILD(9), TILE_OPC_LB_U, TILE_OPC_LH, TILE_OPC_LH_U, TILE_OPC_LW,
+ TILE_OPC_SB, TILE_OPC_SH, TILE_OPC_SW,
+ BITFIELD(20, 2) /* index 9 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(14),
+ BITFIELD(22, 2) /* index 14 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, CHILD(19),
+ BITFIELD(24, 2) /* index 19 */,
+ TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_LB, TILE_OPC_PREFETCH,
+};
+
+#undef BITFIELD
+#undef CHILD
+const unsigned short * const
+tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS] =
+{
+ decode_X0_fsm,
+ decode_X1_fsm,
+ decode_Y0_fsm,
+ decode_Y1_fsm,
+ decode_Y2_fsm
+};
+const struct tile_sn_opcode tile_sn_opcodes[23] =
+{
+ { "bz", TILE_SN_OPC_BZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xe000
+ },
+ { "bnz", TILE_SN_OPC_BNZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xe400
+ },
+ { "jrr", TILE_SN_OPC_JRR,
+ 1 /* num_operands */,
+ /* operands */
+ { 39 },
+ /* fixed_bit_mask */
+ 0xff00,
+ /* fixed_bit_value */
+ 0x0600
+ },
+ { "fnop", TILE_SN_OPC_FNOP,
+ 0 /* num_operands */,
+ /* operands */
+ { 0, },
+ /* fixed_bit_mask */
+ 0xffff,
+ /* fixed_bit_value */
+ 0x0003
+ },
+ { "blz", TILE_SN_OPC_BLZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xf000
+ },
+ { "nop", TILE_SN_OPC_NOP,
+ 0 /* num_operands */,
+ /* operands */
+ { 0, },
+ /* fixed_bit_mask */
+ 0xffff,
+ /* fixed_bit_value */
+ 0x0002
+ },
+ { "movei", TILE_SN_OPC_MOVEI,
+ 1 /* num_operands */,
+ /* operands */
+ { 40 },
+ /* fixed_bit_mask */
+ 0xff00,
+ /* fixed_bit_value */
+ 0x0400
+ },
+ { "move", TILE_SN_OPC_MOVE,
+ 2 /* num_operands */,
+ /* operands */
+ { 41, 42 },
+ /* fixed_bit_mask */
+ 0xfff0,
+ /* fixed_bit_value */
+ 0x0080
+ },
+ { "bgez", TILE_SN_OPC_BGEZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xf400
+ },
+ { "jr", TILE_SN_OPC_JR,
+ 1 /* num_operands */,
+ /* operands */
+ { 42 },
+ /* fixed_bit_mask */
+ 0xfff0,
+ /* fixed_bit_value */
+ 0x0040
+ },
+ { "blez", TILE_SN_OPC_BLEZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xec00
+ },
+ { "bbns", TILE_SN_OPC_BBNS,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xfc00
+ },
+ { "jalrr", TILE_SN_OPC_JALRR,
+ 1 /* num_operands */,
+ /* operands */
+ { 39 },
+ /* fixed_bit_mask */
+ 0xff00,
+ /* fixed_bit_value */
+ 0x0700
+ },
+ { "bpt", TILE_SN_OPC_BPT,
+ 0 /* num_operands */,
+ /* operands */
+ { 0, },
+ /* fixed_bit_mask */
+ 0xffff,
+ /* fixed_bit_value */
+ 0x0001
+ },
+ { "jalr", TILE_SN_OPC_JALR,
+ 1 /* num_operands */,
+ /* operands */
+ { 42 },
+ /* fixed_bit_mask */
+ 0xfff0,
+ /* fixed_bit_value */
+ 0x0050
+ },
+ { "shr1", TILE_SN_OPC_SHR1,
+ 2 /* num_operands */,
+ /* operands */
+ { 41, 42 },
+ /* fixed_bit_mask */
+ 0xfff0,
+ /* fixed_bit_value */
+ 0x0090
+ },
+ { "bgz", TILE_SN_OPC_BGZ,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xe800
+ },
+ { "bbs", TILE_SN_OPC_BBS,
+ 1 /* num_operands */,
+ /* operands */
+ { 38 },
+ /* fixed_bit_mask */
+ 0xfc00,
+ /* fixed_bit_value */
+ 0xf800
+ },
+ { "shl8ii", TILE_SN_OPC_SHL8II,
+ 1 /* num_operands */,
+ /* operands */
+ { 39 },
+ /* fixed_bit_mask */
+ 0xff00,
+ /* fixed_bit_value */
+ 0x0300
+ },
+ { "addi", TILE_SN_OPC_ADDI,
+ 1 /* num_operands */,
+ /* operands */
+ { 40 },
+ /* fixed_bit_mask */
+ 0xff00,
+ /* fixed_bit_value */
+ 0x0500
+ },
+ { "halt", TILE_SN_OPC_HALT,
+ 0 /* num_operands */,
+ /* operands */
+ { 0, },
+ /* fixed_bit_mask */
+ 0xffff,
+ /* fixed_bit_value */
+ 0x0000
+ },
+ { "route", TILE_SN_OPC_ROUTE, 0, { 0, }, 0, 0,
+ },
+ { 0, TILE_SN_OPC_NONE, 0, { 0, }, 0, 0,
+ }
+};
+const unsigned char tile_sn_route_encode[6 * 6 * 6] =
+{
+ 0xdf,
+ 0xde,
+ 0xdd,
+ 0xdc,
+ 0xdb,
+ 0xda,
+ 0xb9,
+ 0xb8,
+ 0xa1,
+ 0xa0,
+ 0x11,
+ 0x10,
+ 0x9f,
+ 0x9e,
+ 0x9d,
+ 0x9c,
+ 0x9b,
+ 0x9a,
+ 0x79,
+ 0x78,
+ 0x61,
+ 0x60,
+ 0xb,
+ 0xa,
+ 0x5f,
+ 0x5e,
+ 0x5d,
+ 0x5c,
+ 0x5b,
+ 0x5a,
+ 0x1f,
+ 0x1e,
+ 0x1d,
+ 0x1c,
+ 0x1b,
+ 0x1a,
+ 0xd7,
+ 0xd6,
+ 0xd5,
+ 0xd4,
+ 0xd3,
+ 0xd2,
+ 0xa7,
+ 0xa6,
+ 0xb1,
+ 0xb0,
+ 0x13,
+ 0x12,
+ 0x97,
+ 0x96,
+ 0x95,
+ 0x94,
+ 0x93,
+ 0x92,
+ 0x67,
+ 0x66,
+ 0x71,
+ 0x70,
+ 0x9,
+ 0x8,
+ 0x57,
+ 0x56,
+ 0x55,
+ 0x54,
+ 0x53,
+ 0x52,
+ 0x17,
+ 0x16,
+ 0x15,
+ 0x14,
+ 0x19,
+ 0x18,
+ 0xcf,
+ 0xce,
+ 0xcd,
+ 0xcc,
+ 0xcb,
+ 0xca,
+ 0xaf,
+ 0xae,
+ 0xad,
+ 0xac,
+ 0xab,
+ 0xaa,
+ 0x8f,
+ 0x8e,
+ 0x8d,
+ 0x8c,
+ 0x8b,
+ 0x8a,
+ 0x6f,
+ 0x6e,
+ 0x6d,
+ 0x6c,
+ 0x6b,
+ 0x6a,
+ 0x4f,
+ 0x4e,
+ 0x4d,
+ 0x4c,
+ 0x4b,
+ 0x4a,
+ 0x2f,
+ 0x2e,
+ 0x2d,
+ 0x2c,
+ 0x2b,
+ 0x2a,
+ 0xc9,
+ 0xc8,
+ 0xc5,
+ 0xc4,
+ 0xc3,
+ 0xc2,
+ 0xa9,
+ 0xa8,
+ 0xa5,
+ 0xa4,
+ 0xa3,
+ 0xa2,
+ 0x89,
+ 0x88,
+ 0x85,
+ 0x84,
+ 0x83,
+ 0x82,
+ 0x69,
+ 0x68,
+ 0x65,
+ 0x64,
+ 0x63,
+ 0x62,
+ 0x47,
+ 0x46,
+ 0x45,
+ 0x44,
+ 0x43,
+ 0x42,
+ 0x27,
+ 0x26,
+ 0x25,
+ 0x24,
+ 0x23,
+ 0x22,
+ 0xd9,
+ 0xd8,
+ 0xc1,
+ 0xc0,
+ 0x3b,
+ 0x3a,
+ 0xbf,
+ 0xbe,
+ 0xbd,
+ 0xbc,
+ 0xbb,
+ 0xba,
+ 0x99,
+ 0x98,
+ 0x81,
+ 0x80,
+ 0x31,
+ 0x30,
+ 0x7f,
+ 0x7e,
+ 0x7d,
+ 0x7c,
+ 0x7b,
+ 0x7a,
+ 0x59,
+ 0x58,
+ 0x3d,
+ 0x3c,
+ 0x49,
+ 0x48,
+ 0xf,
+ 0xe,
+ 0xd,
+ 0xc,
+ 0x29,
+ 0x28,
+ 0xc7,
+ 0xc6,
+ 0xd1,
+ 0xd0,
+ 0x39,
+ 0x38,
+ 0xb7,
+ 0xb6,
+ 0xb5,
+ 0xb4,
+ 0xb3,
+ 0xb2,
+ 0x87,
+ 0x86,
+ 0x91,
+ 0x90,
+ 0x33,
+ 0x32,
+ 0x77,
+ 0x76,
+ 0x75,
+ 0x74,
+ 0x73,
+ 0x72,
+ 0x3f,
+ 0x3e,
+ 0x51,
+ 0x50,
+ 0x41,
+ 0x40,
+ 0x37,
+ 0x36,
+ 0x35,
+ 0x34,
+ 0x21,
+ 0x20
+};
+
+const signed char tile_sn_route_decode[256][3] =
+{
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { 5, 3, 1 },
+ { 4, 3, 1 },
+ { 5, 3, 0 },
+ { 4, 3, 0 },
+ { 3, 5, 4 },
+ { 2, 5, 4 },
+ { 1, 5, 4 },
+ { 0, 5, 4 },
+ { 5, 1, 0 },
+ { 4, 1, 0 },
+ { 5, 1, 1 },
+ { 4, 1, 1 },
+ { 3, 5, 1 },
+ { 2, 5, 1 },
+ { 1, 5, 1 },
+ { 0, 5, 1 },
+ { 5, 5, 1 },
+ { 4, 5, 1 },
+ { 5, 5, 0 },
+ { 4, 5, 0 },
+ { 3, 5, 0 },
+ { 2, 5, 0 },
+ { 1, 5, 0 },
+ { 0, 5, 0 },
+ { 5, 5, 5 },
+ { 4, 5, 5 },
+ { 5, 5, 3 },
+ { 4, 5, 3 },
+ { 3, 5, 3 },
+ { 2, 5, 3 },
+ { 1, 5, 3 },
+ { 0, 5, 3 },
+ { 5, 5, 4 },
+ { 4, 5, 4 },
+ { 5, 5, 2 },
+ { 4, 5, 2 },
+ { 3, 5, 2 },
+ { 2, 5, 2 },
+ { 1, 5, 2 },
+ { 0, 5, 2 },
+ { 5, 2, 4 },
+ { 4, 2, 4 },
+ { 5, 2, 5 },
+ { 4, 2, 5 },
+ { 3, 5, 5 },
+ { 2, 5, 5 },
+ { 1, 5, 5 },
+ { 0, 5, 5 },
+ { 5, 0, 5 },
+ { 4, 0, 5 },
+ { 5, 0, 4 },
+ { 4, 0, 4 },
+ { 3, 4, 4 },
+ { 2, 4, 4 },
+ { 1, 4, 5 },
+ { 0, 4, 5 },
+ { 5, 4, 5 },
+ { 4, 4, 5 },
+ { 5, 4, 3 },
+ { 4, 4, 3 },
+ { 3, 4, 3 },
+ { 2, 4, 3 },
+ { 1, 4, 3 },
+ { 0, 4, 3 },
+ { 5, 4, 4 },
+ { 4, 4, 4 },
+ { 5, 4, 2 },
+ { 4, 4, 2 },
+ { 3, 4, 2 },
+ { 2, 4, 2 },
+ { 1, 4, 2 },
+ { 0, 4, 2 },
+ { 3, 4, 5 },
+ { 2, 4, 5 },
+ { 5, 4, 1 },
+ { 4, 4, 1 },
+ { 3, 4, 1 },
+ { 2, 4, 1 },
+ { 1, 4, 1 },
+ { 0, 4, 1 },
+ { 1, 4, 4 },
+ { 0, 4, 4 },
+ { 5, 4, 0 },
+ { 4, 4, 0 },
+ { 3, 4, 0 },
+ { 2, 4, 0 },
+ { 1, 4, 0 },
+ { 0, 4, 0 },
+ { 3, 3, 0 },
+ { 2, 3, 0 },
+ { 5, 3, 3 },
+ { 4, 3, 3 },
+ { 3, 3, 3 },
+ { 2, 3, 3 },
+ { 1, 3, 1 },
+ { 0, 3, 1 },
+ { 1, 3, 3 },
+ { 0, 3, 3 },
+ { 5, 3, 2 },
+ { 4, 3, 2 },
+ { 3, 3, 2 },
+ { 2, 3, 2 },
+ { 1, 3, 2 },
+ { 0, 3, 2 },
+ { 3, 3, 1 },
+ { 2, 3, 1 },
+ { 5, 3, 5 },
+ { 4, 3, 5 },
+ { 3, 3, 5 },
+ { 2, 3, 5 },
+ { 1, 3, 5 },
+ { 0, 3, 5 },
+ { 1, 3, 0 },
+ { 0, 3, 0 },
+ { 5, 3, 4 },
+ { 4, 3, 4 },
+ { 3, 3, 4 },
+ { 2, 3, 4 },
+ { 1, 3, 4 },
+ { 0, 3, 4 },
+ { 3, 2, 4 },
+ { 2, 2, 4 },
+ { 5, 2, 3 },
+ { 4, 2, 3 },
+ { 3, 2, 3 },
+ { 2, 2, 3 },
+ { 1, 2, 5 },
+ { 0, 2, 5 },
+ { 1, 2, 3 },
+ { 0, 2, 3 },
+ { 5, 2, 2 },
+ { 4, 2, 2 },
+ { 3, 2, 2 },
+ { 2, 2, 2 },
+ { 1, 2, 2 },
+ { 0, 2, 2 },
+ { 3, 2, 5 },
+ { 2, 2, 5 },
+ { 5, 2, 1 },
+ { 4, 2, 1 },
+ { 3, 2, 1 },
+ { 2, 2, 1 },
+ { 1, 2, 1 },
+ { 0, 2, 1 },
+ { 1, 2, 4 },
+ { 0, 2, 4 },
+ { 5, 2, 0 },
+ { 4, 2, 0 },
+ { 3, 2, 0 },
+ { 2, 2, 0 },
+ { 1, 2, 0 },
+ { 0, 2, 0 },
+ { 3, 1, 0 },
+ { 2, 1, 0 },
+ { 5, 1, 3 },
+ { 4, 1, 3 },
+ { 3, 1, 3 },
+ { 2, 1, 3 },
+ { 1, 1, 1 },
+ { 0, 1, 1 },
+ { 1, 1, 3 },
+ { 0, 1, 3 },
+ { 5, 1, 2 },
+ { 4, 1, 2 },
+ { 3, 1, 2 },
+ { 2, 1, 2 },
+ { 1, 1, 2 },
+ { 0, 1, 2 },
+ { 3, 1, 1 },
+ { 2, 1, 1 },
+ { 5, 1, 5 },
+ { 4, 1, 5 },
+ { 3, 1, 5 },
+ { 2, 1, 5 },
+ { 1, 1, 5 },
+ { 0, 1, 5 },
+ { 1, 1, 0 },
+ { 0, 1, 0 },
+ { 5, 1, 4 },
+ { 4, 1, 4 },
+ { 3, 1, 4 },
+ { 2, 1, 4 },
+ { 1, 1, 4 },
+ { 0, 1, 4 },
+ { 3, 0, 4 },
+ { 2, 0, 4 },
+ { 5, 0, 3 },
+ { 4, 0, 3 },
+ { 3, 0, 3 },
+ { 2, 0, 3 },
+ { 1, 0, 5 },
+ { 0, 0, 5 },
+ { 1, 0, 3 },
+ { 0, 0, 3 },
+ { 5, 0, 2 },
+ { 4, 0, 2 },
+ { 3, 0, 2 },
+ { 2, 0, 2 },
+ { 1, 0, 2 },
+ { 0, 0, 2 },
+ { 3, 0, 5 },
+ { 2, 0, 5 },
+ { 5, 0, 1 },
+ { 4, 0, 1 },
+ { 3, 0, 1 },
+ { 2, 0, 1 },
+ { 1, 0, 1 },
+ { 0, 0, 1 },
+ { 1, 0, 4 },
+ { 0, 0, 4 },
+ { 5, 0, 0 },
+ { 4, 0, 0 },
+ { 3, 0, 0 },
+ { 2, 0, 0 },
+ { 1, 0, 0 },
+ { 0, 0, 0 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 },
+ { -1, -1, -1 }
+};
+
+const char tile_sn_direction_names[6][5] =
+{
+ "w",
+ "c",
+ "acc",
+ "n",
+ "e",
+ "s"
+};
+
+const signed char tile_sn_dest_map[6][6] = {
+ { -1, 3, 4, 5, 1, 2 } /* val -> w */,
+ { -1, 3, 4, 5, 0, 2 } /* val -> c */,
+ { -1, 3, 4, 5, 0, 1 } /* val -> acc */,
+ { -1, 4, 5, 0, 1, 2 } /* val -> n */,
+ { -1, 3, 5, 0, 1, 2 } /* val -> e */,
+ { -1, 3, 4, 0, 1, 2 } /* val -> s */
+};
+
+const struct tile_operand tile_operands[43] =
+{
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM8_X0), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_X0, /* insert */
+ get_Imm8_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM8_X1), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_X1, /* insert */
+ get_Imm8_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM8_Y0), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_Y0, /* insert */
+ get_Imm8_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM8_Y1), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_Y1, /* insert */
+ get_Imm8_Y1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM16_X0), /* default_reloc */
+ 16, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm16_X0, /* insert */
+ get_Imm16_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_IMM16_X1), /* default_reloc */
+ 16, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm16_X1, /* insert */
+ get_Imm16_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_ADDRESS, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_JOFFLONG_X1), /* default_reloc */
+ 29, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 1, /* is_pc_relative */
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, /* rightshift */
+ create_JOffLong_X1, /* insert */
+ get_JOffLong_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_X0, /* insert */
+ get_Dest_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_X0, /* insert */
+ get_SrcA_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_X1, /* insert */
+ get_Dest_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_X1, /* insert */
+ get_SrcA_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_Y0, /* insert */
+ get_Dest_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_Y0, /* insert */
+ get_SrcA_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_Y1, /* insert */
+ get_Dest_Y1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_Y1, /* insert */
+ get_SrcA_Y1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_Y2, /* insert */
+ get_SrcA_Y2 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcB_X0, /* insert */
+ get_SrcB_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcB_X1, /* insert */
+ get_SrcB_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcB_Y0, /* insert */
+ get_SrcB_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcB_Y1, /* insert */
+ get_SrcB_Y1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_ADDRESS, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_BROFF_X1), /* default_reloc */
+ 17, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 1, /* is_pc_relative */
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, /* rightshift */
+ create_BrOff_X1, /* insert */
+ get_BrOff_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_X0, /* insert */
+ get_Dest_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_ADDRESS, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 28, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 1, /* is_pc_relative */
+ TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, /* rightshift */
+ create_JOff_X1, /* insert */
+ get_JOff_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcBDest_Y2, /* insert */
+ get_SrcBDest_Y2 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcA_X1, /* insert */
+ get_SrcA_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_SPR, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MF_IMM15_X1), /* default_reloc */
+ 15, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MF_Imm15_X1, /* insert */
+ get_MF_Imm15_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MMSTART_X0), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MMStart_X0, /* insert */
+ get_MMStart_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MMEND_X0), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MMEnd_X0, /* insert */
+ get_MMEnd_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MMSTART_X1), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MMStart_X1, /* insert */
+ get_MMStart_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MMEND_X1), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MMEnd_X1, /* insert */
+ get_MMEnd_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_SPR, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_MT_IMM15_X1), /* default_reloc */
+ 15, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_MT_Imm15_X1, /* insert */
+ get_MT_Imm15_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_Y0, /* insert */
+ get_Dest_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SHAMT_X0), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_ShAmt_X0, /* insert */
+ get_ShAmt_X0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SHAMT_X1), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_ShAmt_X1, /* insert */
+ get_ShAmt_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SHAMT_Y0), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_ShAmt_Y0, /* insert */
+ get_ShAmt_Y0 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SHAMT_Y1), /* default_reloc */
+ 5, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_ShAmt_Y1, /* insert */
+ get_ShAmt_Y1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 6, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_SrcBDest_Y2, /* insert */
+ get_SrcBDest_Y2 /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_Imm8_X1, /* insert */
+ get_Dest_Imm8_X1 /* extract */
+ },
+ {
+ TILE_OP_TYPE_ADDRESS, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SN_BROFF), /* default_reloc */
+ 10, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 1, /* is_pc_relative */
+ TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES, /* rightshift */
+ create_BrOff_SN, /* insert */
+ get_BrOff_SN /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SN_UIMM8), /* default_reloc */
+ 8, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_SN, /* insert */
+ get_Imm8_SN /* extract */
+ },
+ {
+ TILE_OP_TYPE_IMMEDIATE, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_TILE_SN_IMM8), /* default_reloc */
+ 8, /* num_bits */
+ 1, /* is_signed */
+ 0, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Imm8_SN, /* insert */
+ get_Imm8_SN /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 2, /* num_bits */
+ 0, /* is_signed */
+ 0, /* is_src_reg */
+ 1, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Dest_SN, /* insert */
+ get_Dest_SN /* extract */
+ },
+ {
+ TILE_OP_TYPE_REGISTER, /* type */
+ MAYBE_BFD_RELOC(BFD_RELOC_NONE), /* default_reloc */
+ 2, /* num_bits */
+ 0, /* is_signed */
+ 1, /* is_src_reg */
+ 0, /* is_dest_reg */
+ 0, /* is_pc_relative */
+ 0, /* rightshift */
+ create_Src_SN, /* insert */
+ get_Src_SN /* extract */
+ }
+};
+
+const struct tile_spr tile_sprs[] = {
+ { 0, "MPL_ITLB_MISS_SET_0" },
+ { 1, "MPL_ITLB_MISS_SET_1" },
+ { 2, "MPL_ITLB_MISS_SET_2" },
+ { 3, "MPL_ITLB_MISS_SET_3" },
+ { 4, "MPL_ITLB_MISS" },
+ { 256, "ITLB_CURRENT_0" },
+ { 257, "ITLB_CURRENT_1" },
+ { 258, "ITLB_CURRENT_2" },
+ { 259, "ITLB_CURRENT_3" },
+ { 260, "ITLB_INDEX" },
+ { 261, "ITLB_MATCH_0" },
+ { 262, "ITLB_PR" },
+ { 263, "NUMBER_ITLB" },
+ { 264, "REPLACEMENT_ITLB" },
+ { 265, "WIRED_ITLB" },
+ { 266, "ITLB_PERF" },
+ { 512, "MPL_MEM_ERROR_SET_0" },
+ { 513, "MPL_MEM_ERROR_SET_1" },
+ { 514, "MPL_MEM_ERROR_SET_2" },
+ { 515, "MPL_MEM_ERROR_SET_3" },
+ { 516, "MPL_MEM_ERROR" },
+ { 517, "L1_I_ERROR" },
+ { 518, "MEM_ERROR_CBOX_ADDR" },
+ { 519, "MEM_ERROR_CBOX_STATUS" },
+ { 520, "MEM_ERROR_ENABLE" },
+ { 521, "MEM_ERROR_MBOX_ADDR" },
+ { 522, "MEM_ERROR_MBOX_STATUS" },
+ { 523, "SNIC_ERROR_LOG_STATUS" },
+ { 524, "SNIC_ERROR_LOG_VA" },
+ { 525, "XDN_DEMUX_ERROR" },
+ { 1024, "MPL_ILL_SET_0" },
+ { 1025, "MPL_ILL_SET_1" },
+ { 1026, "MPL_ILL_SET_2" },
+ { 1027, "MPL_ILL_SET_3" },
+ { 1028, "MPL_ILL" },
+ { 1536, "MPL_GPV_SET_0" },
+ { 1537, "MPL_GPV_SET_1" },
+ { 1538, "MPL_GPV_SET_2" },
+ { 1539, "MPL_GPV_SET_3" },
+ { 1540, "MPL_GPV" },
+ { 1541, "GPV_REASON" },
+ { 2048, "MPL_SN_ACCESS_SET_0" },
+ { 2049, "MPL_SN_ACCESS_SET_1" },
+ { 2050, "MPL_SN_ACCESS_SET_2" },
+ { 2051, "MPL_SN_ACCESS_SET_3" },
+ { 2052, "MPL_SN_ACCESS" },
+ { 2053, "SNCTL" },
+ { 2054, "SNFIFO_DATA" },
+ { 2055, "SNFIFO_SEL" },
+ { 2056, "SNIC_INVADDR" },
+ { 2057, "SNISTATE" },
+ { 2058, "SNOSTATE" },
+ { 2059, "SNPC" },
+ { 2060, "SNSTATIC" },
+ { 2304, "SN_DATA_AVAIL" },
+ { 2560, "MPL_IDN_ACCESS_SET_0" },
+ { 2561, "MPL_IDN_ACCESS_SET_1" },
+ { 2562, "MPL_IDN_ACCESS_SET_2" },
+ { 2563, "MPL_IDN_ACCESS_SET_3" },
+ { 2564, "MPL_IDN_ACCESS" },
+ { 2565, "IDN_DEMUX_CA_COUNT" },
+ { 2566, "IDN_DEMUX_COUNT_0" },
+ { 2567, "IDN_DEMUX_COUNT_1" },
+ { 2568, "IDN_DEMUX_CTL" },
+ { 2569, "IDN_DEMUX_CURR_TAG" },
+ { 2570, "IDN_DEMUX_QUEUE_SEL" },
+ { 2571, "IDN_DEMUX_STATUS" },
+ { 2572, "IDN_DEMUX_WRITE_FIFO" },
+ { 2573, "IDN_DEMUX_WRITE_QUEUE" },
+ { 2574, "IDN_PENDING" },
+ { 2575, "IDN_SP_FIFO_DATA" },
+ { 2576, "IDN_SP_FIFO_SEL" },
+ { 2577, "IDN_SP_FREEZE" },
+ { 2578, "IDN_SP_STATE" },
+ { 2579, "IDN_TAG_0" },
+ { 2580, "IDN_TAG_1" },
+ { 2581, "IDN_TAG_VALID" },
+ { 2582, "IDN_TILE_COORD" },
+ { 2816, "IDN_CA_DATA" },
+ { 2817, "IDN_CA_REM" },
+ { 2818, "IDN_CA_TAG" },
+ { 2819, "IDN_DATA_AVAIL" },
+ { 3072, "MPL_UDN_ACCESS_SET_0" },
+ { 3073, "MPL_UDN_ACCESS_SET_1" },
+ { 3074, "MPL_UDN_ACCESS_SET_2" },
+ { 3075, "MPL_UDN_ACCESS_SET_3" },
+ { 3076, "MPL_UDN_ACCESS" },
+ { 3077, "UDN_DEMUX_CA_COUNT" },
+ { 3078, "UDN_DEMUX_COUNT_0" },
+ { 3079, "UDN_DEMUX_COUNT_1" },
+ { 3080, "UDN_DEMUX_COUNT_2" },
+ { 3081, "UDN_DEMUX_COUNT_3" },
+ { 3082, "UDN_DEMUX_CTL" },
+ { 3083, "UDN_DEMUX_CURR_TAG" },
+ { 3084, "UDN_DEMUX_QUEUE_SEL" },
+ { 3085, "UDN_DEMUX_STATUS" },
+ { 3086, "UDN_DEMUX_WRITE_FIFO" },
+ { 3087, "UDN_DEMUX_WRITE_QUEUE" },
+ { 3088, "UDN_PENDING" },
+ { 3089, "UDN_SP_FIFO_DATA" },
+ { 3090, "UDN_SP_FIFO_SEL" },
+ { 3091, "UDN_SP_FREEZE" },
+ { 3092, "UDN_SP_STATE" },
+ { 3093, "UDN_TAG_0" },
+ { 3094, "UDN_TAG_1" },
+ { 3095, "UDN_TAG_2" },
+ { 3096, "UDN_TAG_3" },
+ { 3097, "UDN_TAG_VALID" },
+ { 3098, "UDN_TILE_COORD" },
+ { 3328, "UDN_CA_DATA" },
+ { 3329, "UDN_CA_REM" },
+ { 3330, "UDN_CA_TAG" },
+ { 3331, "UDN_DATA_AVAIL" },
+ { 3584, "MPL_IDN_REFILL_SET_0" },
+ { 3585, "MPL_IDN_REFILL_SET_1" },
+ { 3586, "MPL_IDN_REFILL_SET_2" },
+ { 3587, "MPL_IDN_REFILL_SET_3" },
+ { 3588, "MPL_IDN_REFILL" },
+ { 3589, "IDN_REFILL_EN" },
+ { 4096, "MPL_UDN_REFILL_SET_0" },
+ { 4097, "MPL_UDN_REFILL_SET_1" },
+ { 4098, "MPL_UDN_REFILL_SET_2" },
+ { 4099, "MPL_UDN_REFILL_SET_3" },
+ { 4100, "MPL_UDN_REFILL" },
+ { 4101, "UDN_REFILL_EN" },
+ { 4608, "MPL_IDN_COMPLETE_SET_0" },
+ { 4609, "MPL_IDN_COMPLETE_SET_1" },
+ { 4610, "MPL_IDN_COMPLETE_SET_2" },
+ { 4611, "MPL_IDN_COMPLETE_SET_3" },
+ { 4612, "MPL_IDN_COMPLETE" },
+ { 4613, "IDN_REMAINING" },
+ { 5120, "MPL_UDN_COMPLETE_SET_0" },
+ { 5121, "MPL_UDN_COMPLETE_SET_1" },
+ { 5122, "MPL_UDN_COMPLETE_SET_2" },
+ { 5123, "MPL_UDN_COMPLETE_SET_3" },
+ { 5124, "MPL_UDN_COMPLETE" },
+ { 5125, "UDN_REMAINING" },
+ { 5632, "MPL_SWINT_3_SET_0" },
+ { 5633, "MPL_SWINT_3_SET_1" },
+ { 5634, "MPL_SWINT_3_SET_2" },
+ { 5635, "MPL_SWINT_3_SET_3" },
+ { 5636, "MPL_SWINT_3" },
+ { 6144, "MPL_SWINT_2_SET_0" },
+ { 6145, "MPL_SWINT_2_SET_1" },
+ { 6146, "MPL_SWINT_2_SET_2" },
+ { 6147, "MPL_SWINT_2_SET_3" },
+ { 6148, "MPL_SWINT_2" },
+ { 6656, "MPL_SWINT_1_SET_0" },
+ { 6657, "MPL_SWINT_1_SET_1" },
+ { 6658, "MPL_SWINT_1_SET_2" },
+ { 6659, "MPL_SWINT_1_SET_3" },
+ { 6660, "MPL_SWINT_1" },
+ { 7168, "MPL_SWINT_0_SET_0" },
+ { 7169, "MPL_SWINT_0_SET_1" },
+ { 7170, "MPL_SWINT_0_SET_2" },
+ { 7171, "MPL_SWINT_0_SET_3" },
+ { 7172, "MPL_SWINT_0" },
+ { 7680, "MPL_UNALIGN_DATA_SET_0" },
+ { 7681, "MPL_UNALIGN_DATA_SET_1" },
+ { 7682, "MPL_UNALIGN_DATA_SET_2" },
+ { 7683, "MPL_UNALIGN_DATA_SET_3" },
+ { 7684, "MPL_UNALIGN_DATA" },
+ { 8192, "MPL_DTLB_MISS_SET_0" },
+ { 8193, "MPL_DTLB_MISS_SET_1" },
+ { 8194, "MPL_DTLB_MISS_SET_2" },
+ { 8195, "MPL_DTLB_MISS_SET_3" },
+ { 8196, "MPL_DTLB_MISS" },
+ { 8448, "AER_0" },
+ { 8449, "AER_1" },
+ { 8450, "DTLB_BAD_ADDR" },
+ { 8451, "DTLB_BAD_ADDR_REASON" },
+ { 8452, "DTLB_CURRENT_0" },
+ { 8453, "DTLB_CURRENT_1" },
+ { 8454, "DTLB_CURRENT_2" },
+ { 8455, "DTLB_CURRENT_3" },
+ { 8456, "DTLB_INDEX" },
+ { 8457, "DTLB_MATCH_0" },
+ { 8458, "NUMBER_DTLB" },
+ { 8459, "PHYSICAL_MEMORY_MODE" },
+ { 8460, "REPLACEMENT_DTLB" },
+ { 8461, "WIRED_DTLB" },
+ { 8462, "CACHE_RED_WAY_OVERRIDDEN" },
+ { 8463, "DTLB_PERF" },
+ { 8704, "MPL_DTLB_ACCESS_SET_0" },
+ { 8705, "MPL_DTLB_ACCESS_SET_1" },
+ { 8706, "MPL_DTLB_ACCESS_SET_2" },
+ { 8707, "MPL_DTLB_ACCESS_SET_3" },
+ { 8708, "MPL_DTLB_ACCESS" },
+ { 9216, "MPL_DMATLB_MISS_SET_0" },
+ { 9217, "MPL_DMATLB_MISS_SET_1" },
+ { 9218, "MPL_DMATLB_MISS_SET_2" },
+ { 9219, "MPL_DMATLB_MISS_SET_3" },
+ { 9220, "MPL_DMATLB_MISS" },
+ { 9472, "DMA_BAD_ADDR" },
+ { 9473, "DMA_STATUS" },
+ { 9728, "MPL_DMATLB_ACCESS_SET_0" },
+ { 9729, "MPL_DMATLB_ACCESS_SET_1" },
+ { 9730, "MPL_DMATLB_ACCESS_SET_2" },
+ { 9731, "MPL_DMATLB_ACCESS_SET_3" },
+ { 9732, "MPL_DMATLB_ACCESS" },
+ { 10240, "MPL_SNITLB_MISS_SET_0" },
+ { 10241, "MPL_SNITLB_MISS_SET_1" },
+ { 10242, "MPL_SNITLB_MISS_SET_2" },
+ { 10243, "MPL_SNITLB_MISS_SET_3" },
+ { 10244, "MPL_SNITLB_MISS" },
+ { 10245, "NUMBER_SNITLB" },
+ { 10246, "REPLACEMENT_SNITLB" },
+ { 10247, "SNITLB_CURRENT_0" },
+ { 10248, "SNITLB_CURRENT_1" },
+ { 10249, "SNITLB_CURRENT_2" },
+ { 10250, "SNITLB_CURRENT_3" },
+ { 10251, "SNITLB_INDEX" },
+ { 10252, "SNITLB_MATCH_0" },
+ { 10253, "SNITLB_PR" },
+ { 10254, "WIRED_SNITLB" },
+ { 10255, "SNITLB_STATUS" },
+ { 10752, "MPL_SN_NOTIFY_SET_0" },
+ { 10753, "MPL_SN_NOTIFY_SET_1" },
+ { 10754, "MPL_SN_NOTIFY_SET_2" },
+ { 10755, "MPL_SN_NOTIFY_SET_3" },
+ { 10756, "MPL_SN_NOTIFY" },
+ { 10757, "SN_NOTIFY_STATUS" },
+ { 11264, "MPL_SN_FIREWALL_SET_0" },
+ { 11265, "MPL_SN_FIREWALL_SET_1" },
+ { 11266, "MPL_SN_FIREWALL_SET_2" },
+ { 11267, "MPL_SN_FIREWALL_SET_3" },
+ { 11268, "MPL_SN_FIREWALL" },
+ { 11269, "SN_DIRECTION_PROTECT" },
+ { 11776, "MPL_IDN_FIREWALL_SET_0" },
+ { 11777, "MPL_IDN_FIREWALL_SET_1" },
+ { 11778, "MPL_IDN_FIREWALL_SET_2" },
+ { 11779, "MPL_IDN_FIREWALL_SET_3" },
+ { 11780, "MPL_IDN_FIREWALL" },
+ { 11781, "IDN_DIRECTION_PROTECT" },
+ { 12288, "MPL_UDN_FIREWALL_SET_0" },
+ { 12289, "MPL_UDN_FIREWALL_SET_1" },
+ { 12290, "MPL_UDN_FIREWALL_SET_2" },
+ { 12291, "MPL_UDN_FIREWALL_SET_3" },
+ { 12292, "MPL_UDN_FIREWALL" },
+ { 12293, "UDN_DIRECTION_PROTECT" },
+ { 12800, "MPL_TILE_TIMER_SET_0" },
+ { 12801, "MPL_TILE_TIMER_SET_1" },
+ { 12802, "MPL_TILE_TIMER_SET_2" },
+ { 12803, "MPL_TILE_TIMER_SET_3" },
+ { 12804, "MPL_TILE_TIMER" },
+ { 12805, "TILE_TIMER_CONTROL" },
+ { 13312, "MPL_IDN_TIMER_SET_0" },
+ { 13313, "MPL_IDN_TIMER_SET_1" },
+ { 13314, "MPL_IDN_TIMER_SET_2" },
+ { 13315, "MPL_IDN_TIMER_SET_3" },
+ { 13316, "MPL_IDN_TIMER" },
+ { 13317, "IDN_DEADLOCK_COUNT" },
+ { 13318, "IDN_DEADLOCK_TIMEOUT" },
+ { 13824, "MPL_UDN_TIMER_SET_0" },
+ { 13825, "MPL_UDN_TIMER_SET_1" },
+ { 13826, "MPL_UDN_TIMER_SET_2" },
+ { 13827, "MPL_UDN_TIMER_SET_3" },
+ { 13828, "MPL_UDN_TIMER" },
+ { 13829, "UDN_DEADLOCK_COUNT" },
+ { 13830, "UDN_DEADLOCK_TIMEOUT" },
+ { 14336, "MPL_DMA_NOTIFY_SET_0" },
+ { 14337, "MPL_DMA_NOTIFY_SET_1" },
+ { 14338, "MPL_DMA_NOTIFY_SET_2" },
+ { 14339, "MPL_DMA_NOTIFY_SET_3" },
+ { 14340, "MPL_DMA_NOTIFY" },
+ { 14592, "DMA_BYTE" },
+ { 14593, "DMA_CHUNK_SIZE" },
+ { 14594, "DMA_CTR" },
+ { 14595, "DMA_DST_ADDR" },
+ { 14596, "DMA_DST_CHUNK_ADDR" },
+ { 14597, "DMA_SRC_ADDR" },
+ { 14598, "DMA_SRC_CHUNK_ADDR" },
+ { 14599, "DMA_STRIDE" },
+ { 14600, "DMA_USER_STATUS" },
+ { 14848, "MPL_IDN_CA_SET_0" },
+ { 14849, "MPL_IDN_CA_SET_1" },
+ { 14850, "MPL_IDN_CA_SET_2" },
+ { 14851, "MPL_IDN_CA_SET_3" },
+ { 14852, "MPL_IDN_CA" },
+ { 15360, "MPL_UDN_CA_SET_0" },
+ { 15361, "MPL_UDN_CA_SET_1" },
+ { 15362, "MPL_UDN_CA_SET_2" },
+ { 15363, "MPL_UDN_CA_SET_3" },
+ { 15364, "MPL_UDN_CA" },
+ { 15872, "MPL_IDN_AVAIL_SET_0" },
+ { 15873, "MPL_IDN_AVAIL_SET_1" },
+ { 15874, "MPL_IDN_AVAIL_SET_2" },
+ { 15875, "MPL_IDN_AVAIL_SET_3" },
+ { 15876, "MPL_IDN_AVAIL" },
+ { 15877, "IDN_AVAIL_EN" },
+ { 16384, "MPL_UDN_AVAIL_SET_0" },
+ { 16385, "MPL_UDN_AVAIL_SET_1" },
+ { 16386, "MPL_UDN_AVAIL_SET_2" },
+ { 16387, "MPL_UDN_AVAIL_SET_3" },
+ { 16388, "MPL_UDN_AVAIL" },
+ { 16389, "UDN_AVAIL_EN" },
+ { 16896, "MPL_PERF_COUNT_SET_0" },
+ { 16897, "MPL_PERF_COUNT_SET_1" },
+ { 16898, "MPL_PERF_COUNT_SET_2" },
+ { 16899, "MPL_PERF_COUNT_SET_3" },
+ { 16900, "MPL_PERF_COUNT" },
+ { 16901, "PERF_COUNT_0" },
+ { 16902, "PERF_COUNT_1" },
+ { 16903, "PERF_COUNT_CTL" },
+ { 16904, "PERF_COUNT_STS" },
+ { 16905, "WATCH_CTL" },
+ { 16906, "WATCH_MASK" },
+ { 16907, "WATCH_VAL" },
+ { 16912, "PERF_COUNT_DN_CTL" },
+ { 17408, "MPL_INTCTRL_3_SET_0" },
+ { 17409, "MPL_INTCTRL_3_SET_1" },
+ { 17410, "MPL_INTCTRL_3_SET_2" },
+ { 17411, "MPL_INTCTRL_3_SET_3" },
+ { 17412, "MPL_INTCTRL_3" },
+ { 17413, "EX_CONTEXT_3_0" },
+ { 17414, "EX_CONTEXT_3_1" },
+ { 17415, "INTERRUPT_MASK_3_0" },
+ { 17416, "INTERRUPT_MASK_3_1" },
+ { 17417, "INTERRUPT_MASK_RESET_3_0" },
+ { 17418, "INTERRUPT_MASK_RESET_3_1" },
+ { 17419, "INTERRUPT_MASK_SET_3_0" },
+ { 17420, "INTERRUPT_MASK_SET_3_1" },
+ { 17432, "INTCTRL_3_STATUS" },
+ { 17664, "SYSTEM_SAVE_3_0" },
+ { 17665, "SYSTEM_SAVE_3_1" },
+ { 17666, "SYSTEM_SAVE_3_2" },
+ { 17667, "SYSTEM_SAVE_3_3" },
+ { 17920, "MPL_INTCTRL_2_SET_0" },
+ { 17921, "MPL_INTCTRL_2_SET_1" },
+ { 17922, "MPL_INTCTRL_2_SET_2" },
+ { 17923, "MPL_INTCTRL_2_SET_3" },
+ { 17924, "MPL_INTCTRL_2" },
+ { 17925, "EX_CONTEXT_2_0" },
+ { 17926, "EX_CONTEXT_2_1" },
+ { 17927, "INTCTRL_2_STATUS" },
+ { 17928, "INTERRUPT_MASK_2_0" },
+ { 17929, "INTERRUPT_MASK_2_1" },
+ { 17930, "INTERRUPT_MASK_RESET_2_0" },
+ { 17931, "INTERRUPT_MASK_RESET_2_1" },
+ { 17932, "INTERRUPT_MASK_SET_2_0" },
+ { 17933, "INTERRUPT_MASK_SET_2_1" },
+ { 18176, "SYSTEM_SAVE_2_0" },
+ { 18177, "SYSTEM_SAVE_2_1" },
+ { 18178, "SYSTEM_SAVE_2_2" },
+ { 18179, "SYSTEM_SAVE_2_3" },
+ { 18432, "MPL_INTCTRL_1_SET_0" },
+ { 18433, "MPL_INTCTRL_1_SET_1" },
+ { 18434, "MPL_INTCTRL_1_SET_2" },
+ { 18435, "MPL_INTCTRL_1_SET_3" },
+ { 18436, "MPL_INTCTRL_1" },
+ { 18437, "EX_CONTEXT_1_0" },
+ { 18438, "EX_CONTEXT_1_1" },
+ { 18439, "INTCTRL_1_STATUS" },
+ { 18440, "INTCTRL_3_STATUS_REV0" },
+ { 18441, "INTERRUPT_MASK_1_0" },
+ { 18442, "INTERRUPT_MASK_1_1" },
+ { 18443, "INTERRUPT_MASK_RESET_1_0" },
+ { 18444, "INTERRUPT_MASK_RESET_1_1" },
+ { 18445, "INTERRUPT_MASK_SET_1_0" },
+ { 18446, "INTERRUPT_MASK_SET_1_1" },
+ { 18688, "SYSTEM_SAVE_1_0" },
+ { 18689, "SYSTEM_SAVE_1_1" },
+ { 18690, "SYSTEM_SAVE_1_2" },
+ { 18691, "SYSTEM_SAVE_1_3" },
+ { 18944, "MPL_INTCTRL_0_SET_0" },
+ { 18945, "MPL_INTCTRL_0_SET_1" },
+ { 18946, "MPL_INTCTRL_0_SET_2" },
+ { 18947, "MPL_INTCTRL_0_SET_3" },
+ { 18948, "MPL_INTCTRL_0" },
+ { 18949, "EX_CONTEXT_0_0" },
+ { 18950, "EX_CONTEXT_0_1" },
+ { 18951, "INTCTRL_0_STATUS" },
+ { 18952, "INTERRUPT_MASK_0_0" },
+ { 18953, "INTERRUPT_MASK_0_1" },
+ { 18954, "INTERRUPT_MASK_RESET_0_0" },
+ { 18955, "INTERRUPT_MASK_RESET_0_1" },
+ { 18956, "INTERRUPT_MASK_SET_0_0" },
+ { 18957, "INTERRUPT_MASK_SET_0_1" },
+ { 19200, "SYSTEM_SAVE_0_0" },
+ { 19201, "SYSTEM_SAVE_0_1" },
+ { 19202, "SYSTEM_SAVE_0_2" },
+ { 19203, "SYSTEM_SAVE_0_3" },
+ { 19456, "MPL_BOOT_ACCESS_SET_0" },
+ { 19457, "MPL_BOOT_ACCESS_SET_1" },
+ { 19458, "MPL_BOOT_ACCESS_SET_2" },
+ { 19459, "MPL_BOOT_ACCESS_SET_3" },
+ { 19460, "MPL_BOOT_ACCESS" },
+ { 19461, "CBOX_CACHEASRAM_CONFIG" },
+ { 19462, "CBOX_CACHE_CONFIG" },
+ { 19463, "CBOX_MMAP_0" },
+ { 19464, "CBOX_MMAP_1" },
+ { 19465, "CBOX_MMAP_2" },
+ { 19466, "CBOX_MMAP_3" },
+ { 19467, "CBOX_MSR" },
+ { 19468, "CBOX_SRC_ID" },
+ { 19469, "CYCLE_HIGH_MODIFY" },
+ { 19470, "CYCLE_LOW_MODIFY" },
+ { 19471, "DIAG_BCST_CTL" },
+ { 19472, "DIAG_BCST_MASK" },
+ { 19473, "DIAG_BCST_TRIGGER" },
+ { 19474, "DIAG_MUX_CTL" },
+ { 19475, "DIAG_TRACE_CTL" },
+ { 19476, "DIAG_TRACE_STS" },
+ { 19477, "IDN_DEMUX_BUF_THRESH" },
+ { 19478, "SBOX_CONFIG" },
+ { 19479, "TILE_COORD" },
+ { 19480, "UDN_DEMUX_BUF_THRESH" },
+ { 19481, "CBOX_HOME_MAP_ADDR" },
+ { 19482, "CBOX_HOME_MAP_DATA" },
+ { 19483, "CBOX_MSR1" },
+ { 19484, "BIG_ENDIAN_CONFIG" },
+ { 19485, "MEM_STRIPE_CONFIG" },
+ { 19486, "DIAG_TRACE_WAY" },
+ { 19487, "VDN_SNOOP_SHIM_CTL" },
+ { 19488, "PERF_COUNT_PLS" },
+ { 19489, "DIAG_TRACE_DATA" },
+ { 19712, "I_AER_0" },
+ { 19713, "I_AER_1" },
+ { 19714, "I_PHYSICAL_MEMORY_MODE" },
+ { 19968, "MPL_WORLD_ACCESS_SET_0" },
+ { 19969, "MPL_WORLD_ACCESS_SET_1" },
+ { 19970, "MPL_WORLD_ACCESS_SET_2" },
+ { 19971, "MPL_WORLD_ACCESS_SET_3" },
+ { 19972, "MPL_WORLD_ACCESS" },
+ { 19973, "SIM_SOCKET" },
+ { 19974, "CYCLE_HIGH" },
+ { 19975, "CYCLE_LOW" },
+ { 19976, "DONE" },
+ { 19977, "FAIL" },
+ { 19978, "INTERRUPT_CRITICAL_SECTION" },
+ { 19979, "PASS" },
+ { 19980, "SIM_CONTROL" },
+ { 19981, "EVENT_BEGIN" },
+ { 19982, "EVENT_END" },
+ { 19983, "TILE_WRITE_PENDING" },
+ { 19984, "TILE_RTF_HWM" },
+ { 20224, "PROC_STATUS" },
+ { 20225, "STATUS_SATURATE" },
+ { 20480, "MPL_I_ASID_SET_0" },
+ { 20481, "MPL_I_ASID_SET_1" },
+ { 20482, "MPL_I_ASID_SET_2" },
+ { 20483, "MPL_I_ASID_SET_3" },
+ { 20484, "MPL_I_ASID" },
+ { 20485, "I_ASID" },
+ { 20992, "MPL_D_ASID_SET_0" },
+ { 20993, "MPL_D_ASID_SET_1" },
+ { 20994, "MPL_D_ASID_SET_2" },
+ { 20995, "MPL_D_ASID_SET_3" },
+ { 20996, "MPL_D_ASID" },
+ { 20997, "D_ASID" },
+ { 21504, "MPL_DMA_ASID_SET_0" },
+ { 21505, "MPL_DMA_ASID_SET_1" },
+ { 21506, "MPL_DMA_ASID_SET_2" },
+ { 21507, "MPL_DMA_ASID_SET_3" },
+ { 21508, "MPL_DMA_ASID" },
+ { 21509, "DMA_ASID" },
+ { 22016, "MPL_SNI_ASID_SET_0" },
+ { 22017, "MPL_SNI_ASID_SET_1" },
+ { 22018, "MPL_SNI_ASID_SET_2" },
+ { 22019, "MPL_SNI_ASID_SET_3" },
+ { 22020, "MPL_SNI_ASID" },
+ { 22021, "SNI_ASID" },
+ { 22528, "MPL_DMA_CPL_SET_0" },
+ { 22529, "MPL_DMA_CPL_SET_1" },
+ { 22530, "MPL_DMA_CPL_SET_2" },
+ { 22531, "MPL_DMA_CPL_SET_3" },
+ { 22532, "MPL_DMA_CPL" },
+ { 23040, "MPL_SN_CPL_SET_0" },
+ { 23041, "MPL_SN_CPL_SET_1" },
+ { 23042, "MPL_SN_CPL_SET_2" },
+ { 23043, "MPL_SN_CPL_SET_3" },
+ { 23044, "MPL_SN_CPL" },
+ { 23552, "MPL_DOUBLE_FAULT_SET_0" },
+ { 23553, "MPL_DOUBLE_FAULT_SET_1" },
+ { 23554, "MPL_DOUBLE_FAULT_SET_2" },
+ { 23555, "MPL_DOUBLE_FAULT_SET_3" },
+ { 23556, "MPL_DOUBLE_FAULT" },
+ { 23557, "LAST_INTERRUPT_REASON" },
+ { 24064, "MPL_SN_STATIC_ACCESS_SET_0" },
+ { 24065, "MPL_SN_STATIC_ACCESS_SET_1" },
+ { 24066, "MPL_SN_STATIC_ACCESS_SET_2" },
+ { 24067, "MPL_SN_STATIC_ACCESS_SET_3" },
+ { 24068, "MPL_SN_STATIC_ACCESS" },
+ { 24069, "SN_STATIC_CTL" },
+ { 24070, "SN_STATIC_FIFO_DATA" },
+ { 24071, "SN_STATIC_FIFO_SEL" },
+ { 24073, "SN_STATIC_ISTATE" },
+ { 24074, "SN_STATIC_OSTATE" },
+ { 24076, "SN_STATIC_STATIC" },
+ { 24320, "SN_STATIC_DATA_AVAIL" },
+ { 24576, "MPL_AUX_PERF_COUNT_SET_0" },
+ { 24577, "MPL_AUX_PERF_COUNT_SET_1" },
+ { 24578, "MPL_AUX_PERF_COUNT_SET_2" },
+ { 24579, "MPL_AUX_PERF_COUNT_SET_3" },
+ { 24580, "MPL_AUX_PERF_COUNT" },
+ { 24581, "AUX_PERF_COUNT_0" },
+ { 24582, "AUX_PERF_COUNT_1" },
+ { 24583, "AUX_PERF_COUNT_CTL" },
+ { 24584, "AUX_PERF_COUNT_STS" },
+};
+
+const int tile_num_sprs = 499;
+
+
+
+
+/* Canonical name of each register. */
+const char *const tile_register_names[] =
+{
+ "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+ "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+ "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39",
+ "r40", "r41", "r42", "r43", "r44", "r45", "r46", "r47",
+ "r48", "r49", "r50", "r51", "r52", "tp", "sp", "lr",
+ "sn", "idn0", "idn1", "udn0", "udn1", "udn2", "udn3", "zero"
+};
+
+
+/* Given a set of bundle bits and the lookup FSM for a specific pipe,
+ * returns which instruction the bundle contains in that pipe.
+ */
+static const struct tile_opcode *
+find_opcode(tile_bundle_bits bits, const unsigned short *table)
+{
+ int index = 0;
+
+ while (1)
+ {
+ unsigned short bitspec = table[index];
+ unsigned int bitfield =
+ ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6);
+
+ unsigned short next = table[index + 1 + bitfield];
+ if (next <= TILE_OPC_NONE)
+ return &tile_opcodes[next];
+
+ index = next - TILE_OPC_NONE;
+ }
+}
+
+
+int
+parse_insn_tile(tile_bundle_bits bits,
+ unsigned int pc,
+ struct tile_decoded_instruction
+ decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE])
+{
+ int num_instructions = 0;
+ int pipe;
+
+ int min_pipe, max_pipe;
+ if ((bits & TILE_BUNDLE_Y_ENCODING_MASK) == 0)
+ {
+ min_pipe = TILE_PIPELINE_X0;
+ max_pipe = TILE_PIPELINE_X1;
+ }
+ else
+ {
+ min_pipe = TILE_PIPELINE_Y0;
+ max_pipe = TILE_PIPELINE_Y2;
+ }
+
+ /* For each pipe, find an instruction that fits. */
+ for (pipe = min_pipe; pipe <= max_pipe; pipe++)
+ {
+ const struct tile_opcode *opc;
+ struct tile_decoded_instruction *d;
+ int i;
+
+ d = &decoded[num_instructions++];
+ opc = find_opcode (bits, tile_bundle_decoder_fsms[pipe]);
+ d->opcode = opc;
+
+ /* Decode each operand, sign extending, etc. as appropriate. */
+ for (i = 0; i < opc->num_operands; i++)
+ {
+ const struct tile_operand *op =
+ &tile_operands[opc->operands[pipe][i]];
+ int opval = op->extract (bits);
+ if (op->is_signed)
+ {
+ /* Sign-extend the operand. */
+ int shift = (int)((sizeof(int) * 8) - op->num_bits);
+ opval = (opval << shift) >> shift;
+ }
+
+ /* Adjust PC-relative scaled branch offsets. */
+ if (op->type == TILE_OP_TYPE_ADDRESS)
+ {
+ opval *= TILE_BUNDLE_SIZE_IN_BYTES;
+ opval += (int)pc;
+ }
+
+ /* Record the final value. */
+ d->operands[i] = op;
+ d->operand_values[i] = opval;
+ }
+ }
+
+ return num_instructions;
+}
diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c
new file mode 100644
index 000000000000..47500a324e32
--- /dev/null
+++ b/arch/tile/kernel/time.c
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Support the cycle counter clocksource and tile timer clock event device.
+ */
+
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/hardirq.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <asm/irq_regs.h>
+#include <hv/hypervisor.h>
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+
+/*
+ * Define the cycle counter clock source.
+ */
+
+/* How many cycles per second we are running at. */
+static cycles_t cycles_per_sec __write_once;
+
+/*
+ * We set up shift and multiply values with a minsec of five seconds,
+ * since our timer counter counts down 31 bits at a frequency of
+ * no less than 500 MHz. See @minsec for clocks_calc_mult_shift().
+ * We could use a different value for the 64-bit free-running
+ * cycle counter, but we use the same one for consistency, and since
+ * we will be reasonably precise with this value anyway.
+ */
+#define TILE_MINSEC 5
+
+cycles_t get_clock_rate()
+{
+ return cycles_per_sec;
+}
+
+#if CHIP_HAS_SPLIT_CYCLE()
+cycles_t get_cycles()
+{
+ unsigned int high = __insn_mfspr(SPR_CYCLE_HIGH);
+ unsigned int low = __insn_mfspr(SPR_CYCLE_LOW);
+ unsigned int high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+
+ while (unlikely(high != high2)) {
+ low = __insn_mfspr(SPR_CYCLE_LOW);
+ high = high2;
+ high2 = __insn_mfspr(SPR_CYCLE_HIGH);
+ }
+
+ return (((cycles_t)high) << 32) | low;
+}
+#endif
+
+cycles_t clocksource_get_cycles(struct clocksource *cs)
+{
+ return get_cycles();
+}
+
+static struct clocksource cycle_counter_cs = {
+ .name = "cycle counter",
+ .rating = 300,
+ .read = clocksource_get_cycles,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Called very early from setup_arch() to set cycles_per_sec.
+ * We initialize it early so we can use it to set up loops_per_jiffy.
+ */
+void __init setup_clock(void)
+{
+ cycles_per_sec = hv_sysconf(HV_SYSCONF_CPU_SPEED);
+ clocksource_calc_mult_shift(&cycle_counter_cs, cycles_per_sec,
+ TILE_MINSEC);
+}
+
+void __init calibrate_delay(void)
+{
+ loops_per_jiffy = get_clock_rate() / HZ;
+ pr_info("Clock rate yields %lu.%02lu BogoMIPS (lpj=%lu)\n",
+ loops_per_jiffy/(500000/HZ),
+ (loops_per_jiffy/(5000/HZ)) % 100, loops_per_jiffy);
+}
+
+/* Called fairly late in init/main.c, but before we go smp. */
+void __init time_init(void)
+{
+ /* Initialize and register the clock source. */
+ clocksource_register(&cycle_counter_cs);
+
+ /* Start up the tile-timer interrupt source on the boot cpu. */
+ setup_tile_timer();
+}
+
+
+/*
+ * Define the tile timer clock event device. The timer is driven by
+ * the TILE_TIMER_CONTROL register, which consists of a 31-bit down
+ * counter, plus bit 31, which signifies that the counter has wrapped
+ * from zero to (2**31) - 1. The INT_TILE_TIMER interrupt will be
+ * raised as long as bit 31 is set.
+ */
+
+#define MAX_TICK 0x7fffffff /* we have 31 bits of countdown timer */
+
+static int tile_timer_set_next_event(unsigned long ticks,
+ struct clock_event_device *evt)
+{
+ BUG_ON(ticks > MAX_TICK);
+ __insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks);
+ raw_local_irq_unmask_now(INT_TILE_TIMER);
+ return 0;
+}
+
+/*
+ * Whenever anyone tries to change modes, we just mask interrupts
+ * and wait for the next event to get set.
+ */
+static void tile_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ raw_local_irq_mask_now(INT_TILE_TIMER);
+}
+
+/*
+ * Set min_delta_ns to 1 microsecond, since it takes about
+ * that long to fire the interrupt.
+ */
+static DEFINE_PER_CPU(struct clock_event_device, tile_timer) = {
+ .name = "tile timer",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .min_delta_ns = 1000,
+ .rating = 100,
+ .irq = -1,
+ .set_next_event = tile_timer_set_next_event,
+ .set_mode = tile_timer_set_mode,
+};
+
+void __cpuinit setup_tile_timer(void)
+{
+ struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+
+ /* Fill in fields that are speed-specific. */
+ clockevents_calc_mult_shift(evt, cycles_per_sec, TILE_MINSEC);
+ evt->max_delta_ns = clockevent_delta2ns(MAX_TICK, evt);
+
+ /* Mark as being for this cpu only. */
+ evt->cpumask = cpumask_of(smp_processor_id());
+
+ /* Start out with timer not firing. */
+ raw_local_irq_mask_now(INT_TILE_TIMER);
+
+ /* Register tile timer. */
+ clockevents_register_device(evt);
+}
+
+/* Called from the interrupt vector. */
+void do_timer_interrupt(struct pt_regs *regs, int fault_num)
+{
+ struct pt_regs *old_regs = set_irq_regs(regs);
+ struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+
+ /*
+ * Mask the timer interrupt here, since we are a oneshot timer
+ * and there are now by definition no events pending.
+ */
+ raw_local_irq_mask(INT_TILE_TIMER);
+
+ /* Track time spent here in an interrupt context */
+ irq_enter();
+
+ /* Track interrupt count. */
+ __get_cpu_var(irq_stat).irq_timer_count++;
+
+ /* Call the generic timer handler */
+ evt->event_handler(evt);
+
+ /*
+ * Track time spent against the current process again and
+ * process any softirqs if they are waiting.
+ */
+ irq_exit();
+
+ set_irq_regs(old_regs);
+}
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ * Note that with LOCKDEP, this is called during lockdep_init(), and
+ * we will claim that sched_clock() is zero for a little while, until
+ * we run setup_clock(), above.
+ */
+unsigned long long sched_clock(void)
+{
+ return clocksource_cyc2ns(get_cycles(),
+ cycle_counter_cs.mult,
+ cycle_counter_cs.shift);
+}
+
+int setup_profiling_timer(unsigned int multiplier)
+{
+ return -EINVAL;
+}
diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c
new file mode 100644
index 000000000000..2dffc1044d83
--- /dev/null
+++ b/arch/tile/kernel/tlb.c
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+#include <hv/hypervisor.h>
+
+/* From tlbflush.h */
+DEFINE_PER_CPU(int, current_asid);
+int min_asid, max_asid;
+
+/*
+ * Note that we flush the L1I (for VM_EXEC pages) as well as the TLB
+ * so that when we are unmapping an executable page, we also flush it.
+ * Combined with flushing the L1I at context switch time, this means
+ * we don't have to do any other icache flushes.
+ */
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ HV_Remote_ASID asids[NR_CPUS];
+ int i = 0, cpu;
+ for_each_cpu(cpu, &mm->cpu_vm_mask) {
+ HV_Remote_ASID *asid = &asids[i++];
+ asid->y = cpu / smp_topology.width;
+ asid->x = cpu % smp_topology.width;
+ asid->asid = per_cpu(current_asid, cpu);
+ }
+ flush_remote(0, HV_FLUSH_EVICT_L1I, &mm->cpu_vm_mask,
+ 0, 0, 0, NULL, asids, i);
+}
+
+void flush_tlb_current_task(void)
+{
+ flush_tlb_mm(current->mm);
+}
+
+void flush_tlb_page_mm(const struct vm_area_struct *vma, struct mm_struct *mm,
+ unsigned long va)
+{
+ unsigned long size = hv_page_size(vma);
+ int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
+ flush_remote(0, cache, &mm->cpu_vm_mask,
+ va, size, size, &mm->cpu_vm_mask, NULL, 0);
+}
+
+void flush_tlb_page(const struct vm_area_struct *vma, unsigned long va)
+{
+ flush_tlb_page_mm(vma, vma->vm_mm, va);
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+void flush_tlb_range(const struct vm_area_struct *vma,
+ unsigned long start, unsigned long end)
+{
+ unsigned long size = hv_page_size(vma);
+ struct mm_struct *mm = vma->vm_mm;
+ int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0;
+ flush_remote(0, cache, &mm->cpu_vm_mask, start, end - start, size,
+ &mm->cpu_vm_mask, NULL, 0);
+}
+
+void flush_tlb_all(void)
+{
+ int i;
+ for (i = 0; ; ++i) {
+ HV_VirtAddrRange r = hv_inquire_virtual(i);
+ if (r.size == 0)
+ break;
+ flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask,
+ r.start, r.size, PAGE_SIZE, cpu_online_mask,
+ NULL, 0);
+ flush_remote(0, 0, NULL,
+ r.start, r.size, HPAGE_SIZE, cpu_online_mask,
+ NULL, 0);
+ }
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask,
+ start, end - start, PAGE_SIZE, cpu_online_mask, NULL, 0);
+}
diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c
new file mode 100644
index 000000000000..12cb10f38527
--- /dev/null
+++ b/arch/tile/kernel/traps.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+#include <asm/opcode-tile.h>
+
+#include <arch/interrupts.h>
+#include <arch/spr_def.h>
+
+void __init trap_init(void)
+{
+ /* Nothing needed here since we link code at .intrpt1 */
+}
+
+int unaligned_fixup = 1;
+
+static int __init setup_unaligned_fixup(char *str)
+{
+ /*
+ * Say "=-1" to completely disable it. If you just do "=0", we
+ * will still parse the instruction, then fire a SIGBUS with
+ * the correct address from inside the single_step code.
+ */
+ long val;
+ if (strict_strtol(str, 0, &val) != 0)
+ return 0;
+ unaligned_fixup = val;
+ printk("Fixups for unaligned data accesses are %s\n",
+ unaligned_fixup >= 0 ?
+ (unaligned_fixup ? "enabled" : "disabled") :
+ "completely disabled");
+ return 1;
+}
+__setup("unaligned_fixup=", setup_unaligned_fixup);
+
+#if CHIP_HAS_TILE_DMA()
+
+static int dma_disabled;
+
+static int __init nodma(char *str)
+{
+ printk("User-space DMA is disabled\n");
+ dma_disabled = 1;
+ return 1;
+}
+__setup("nodma", nodma);
+
+/* How to decode SPR_GPV_REASON */
+#define IRET_ERROR (1U << 31)
+#define MT_ERROR (1U << 30)
+#define MF_ERROR (1U << 29)
+#define SPR_INDEX ((1U << 15) - 1)
+#define SPR_MPL_SHIFT 9 /* starting bit position for MPL encoded in SPR */
+
+/*
+ * See if this GPV is just to notify the kernel of SPR use and we can
+ * retry the user instruction after adjusting some MPLs suitably.
+ */
+static int retry_gpv(unsigned int gpv_reason)
+{
+ int mpl;
+
+ if (gpv_reason & IRET_ERROR)
+ return 0;
+
+ BUG_ON((gpv_reason & (MT_ERROR|MF_ERROR)) == 0);
+ mpl = (gpv_reason & SPR_INDEX) >> SPR_MPL_SHIFT;
+ if (mpl == INT_DMA_NOTIFY && !dma_disabled) {
+ /* User is turning on DMA. Allow it and retry. */
+ printk(KERN_DEBUG "Process %d/%s is now enabled for DMA\n",
+ current->pid, current->comm);
+ BUG_ON(current->thread.tile_dma_state.enabled);
+ current->thread.tile_dma_state.enabled = 1;
+ grant_dma_mpls();
+ return 1;
+ }
+
+ return 0;
+}
+
+#endif /* CHIP_HAS_TILE_DMA() */
+
+/* Defined inside do_trap(), below. */
+#ifdef __tilegx__
+extern tilegx_bundle_bits bpt_code;
+#else
+extern tile_bundle_bits bpt_code;
+#endif
+
+void __kprobes do_trap(struct pt_regs *regs, int fault_num,
+ unsigned long reason)
+{
+ siginfo_t info = { 0 };
+ int signo, code;
+ unsigned long address;
+ __typeof__(bpt_code) instr;
+
+ /* Re-enable interrupts. */
+ local_irq_enable();
+
+ /*
+ * If it hits in kernel mode and we can't fix it up, just exit the
+ * current process and hope for the best.
+ */
+ if (!user_mode(regs)) {
+ if (fixup_exception(regs)) /* only UNALIGN_DATA in practice */
+ return;
+ printk(KERN_ALERT "Kernel took bad trap %d at PC %#lx\n",
+ fault_num, regs->pc);
+ if (fault_num == INT_GPV)
+ printk(KERN_ALERT "GPV_REASON is %#lx\n", reason);
+ show_regs(regs);
+ do_exit(SIGKILL); /* FIXME: implement i386 die() */
+ return;
+ }
+
+ switch (fault_num) {
+ case INT_ILL:
+ asm(".pushsection .rodata.bpt_code,\"a\";"
+ ".align 8;"
+ "bpt_code: bpt;"
+ ".size bpt_code,.-bpt_code;"
+ ".popsection");
+
+ if (copy_from_user(&instr, (void *)regs->pc, sizeof(instr))) {
+ printk(KERN_ERR "Unreadable instruction for INT_ILL:"
+ " %#lx\n", regs->pc);
+ do_exit(SIGKILL);
+ return;
+ }
+ if (instr == bpt_code) {
+ signo = SIGTRAP;
+ code = TRAP_BRKPT;
+ } else {
+ signo = SIGILL;
+ code = ILL_ILLOPC;
+ }
+ address = regs->pc;
+ break;
+ case INT_GPV:
+#if CHIP_HAS_TILE_DMA()
+ if (retry_gpv(reason))
+ return;
+#endif
+ /*FALLTHROUGH*/
+ case INT_UDN_ACCESS:
+ case INT_IDN_ACCESS:
+#if CHIP_HAS_SN()
+ case INT_SN_ACCESS:
+#endif
+ signo = SIGILL;
+ code = ILL_PRVREG;
+ address = regs->pc;
+ break;
+ case INT_SWINT_3:
+ case INT_SWINT_2:
+ case INT_SWINT_0:
+ signo = SIGILL;
+ code = ILL_ILLTRP;
+ address = regs->pc;
+ break;
+ case INT_UNALIGN_DATA:
+#ifndef __tilegx__ /* FIXME: GX: no single-step yet */
+ if (unaligned_fixup >= 0) {
+ struct single_step_state *state =
+ current_thread_info()->step_state;
+ if (!state || (void *)(regs->pc) != state->buffer) {
+ single_step_once(regs);
+ return;
+ }
+ }
+#endif
+ signo = SIGBUS;
+ code = BUS_ADRALN;
+ address = 0;
+ break;
+ case INT_DOUBLE_FAULT:
+ /*
+ * For double fault, "reason" is actually passed as
+ * SYSTEM_SAVE_1_2, the hypervisor's double-fault info, so
+ * we can provide the original fault number rather than
+ * the uninteresting "INT_DOUBLE_FAULT" so the user can
+ * learn what actually struck while PL0 ICS was set.
+ */
+ fault_num = reason;
+ signo = SIGILL;
+ code = ILL_DBLFLT;
+ address = regs->pc;
+ break;
+#ifdef __tilegx__
+ case INT_ILL_TRANS:
+ signo = SIGSEGV;
+ code = SEGV_MAPERR;
+ if (reason & SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK)
+ address = regs->pc;
+ else
+ address = 0; /* FIXME: GX: single-step for address */
+ break;
+#endif
+ default:
+ panic("Unexpected do_trap interrupt number %d", fault_num);
+ return;
+ }
+
+ info.si_signo = signo;
+ info.si_code = code;
+ info.si_addr = (void *)address;
+ if (signo == SIGILL)
+ info.si_trapno = fault_num;
+ force_sig_info(signo, &info, current);
+}
+
+extern void _dump_stack(int dummy, ulong pc, ulong lr, ulong sp, ulong r52);
+
+void kernel_double_fault(int dummy, ulong pc, ulong lr, ulong sp, ulong r52)
+{
+ _dump_stack(dummy, pc, lr, sp, r52);
+ printk("Double fault: exiting\n");
+ machine_halt();
+}
diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..77388c1415bd
--- /dev/null
+++ b/arch/tile/kernel/vmlinux.lds.S
@@ -0,0 +1,98 @@
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <hv/hypervisor.h>
+
+/* Text loads starting from the supervisor interrupt vector address. */
+#define TEXT_OFFSET MEM_SV_INTRPT
+
+OUTPUT_ARCH(tile)
+ENTRY(_start)
+jiffies = jiffies_64;
+
+PHDRS
+{
+ intrpt1 PT_LOAD ;
+ text PT_LOAD ;
+ data PT_LOAD ;
+}
+SECTIONS
+{
+ /* Text is loaded with a different VA than data; start with text. */
+ #undef LOAD_OFFSET
+ #define LOAD_OFFSET TEXT_OFFSET
+
+ /* Interrupt vectors */
+ .intrpt1 (LOAD_OFFSET) : AT ( 0 ) /* put at the start of physical memory */
+ {
+ _text = .;
+ _stext = .;
+ *(.intrpt1)
+ } :intrpt1 =0
+
+ /* Hypervisor call vectors */
+ #include "hvglue.lds"
+
+ /* Now the real code */
+ . = ALIGN(0x20000);
+ HEAD_TEXT_SECTION :text =0
+ .text : AT (ADDR(.text) - LOAD_OFFSET) {
+ SCHED_TEXT
+ LOCK_TEXT
+ __fix_text_end = .; /* tile-cpack won't rearrange before this */
+ TEXT_TEXT
+ *(.text.*)
+ *(.coldtext*)
+ *(.fixup)
+ *(.gnu.warning)
+ }
+ _etext = .;
+
+ /* "Init" is divided into two areas with very different virtual addresses. */
+ INIT_TEXT_SECTION(PAGE_SIZE)
+
+ /* Now we skip back to PAGE_OFFSET for the data. */
+ . = (. - TEXT_OFFSET + PAGE_OFFSET);
+ #undef LOAD_OFFSET
+ #define LOAD_OFFSET PAGE_OFFSET
+
+ . = ALIGN(PAGE_SIZE);
+ VMLINUX_SYMBOL(_sinitdata) = .;
+ .init.page : AT (ADDR(.init.page) - LOAD_OFFSET) {
+ *(.init.page)
+ } :data =0
+ INIT_DATA_SECTION(16)
+ PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
+ VMLINUX_SYMBOL(_einitdata) = .;
+
+ _sdata = .; /* Start of data section */
+
+ RO_DATA_SECTION(PAGE_SIZE)
+
+ /* initially writeable, then read-only */
+ . = ALIGN(PAGE_SIZE);
+ __w1data_begin = .;
+ .w1data : AT(ADDR(.w1data) - LOAD_OFFSET) {
+ VMLINUX_SYMBOL(__w1data_begin) = .;
+ *(.w1data)
+ VMLINUX_SYMBOL(__w1data_end) = .;
+ }
+
+ RW_DATA_SECTION(L2_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+
+ _edata = .;
+
+ EXCEPTION_TABLE(L2_CACHE_BYTES)
+ NOTES
+
+
+ BSS_SECTION(8, PAGE_SIZE, 1)
+ _end = . ;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+
+ DISCARDS
+}
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile
new file mode 100644
index 000000000000..ea9c209d33fb
--- /dev/null
+++ b/arch/tile/lib/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for TILE-specific library files..
+#
+
+lib-y = checksum.o cpumask.o delay.o __invalidate_icache.o \
+ mb_incoherent.o uaccess.o \
+ memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \
+ strchr_$(BITS).o strlen_$(BITS).o
+
+ifneq ($(CONFIG_TILEGX),y)
+lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o
+endif
+
+lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o
+
+obj-$(CONFIG_MODULES) += exports.o
diff --git a/arch/tile/lib/__invalidate_icache.S b/arch/tile/lib/__invalidate_icache.S
new file mode 100644
index 000000000000..92e705059127
--- /dev/null
+++ b/arch/tile/lib/__invalidate_icache.S
@@ -0,0 +1,106 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ * A routine for synchronizing the instruction and data caches.
+ * Useful for self-modifying code.
+ *
+ * r0 holds the buffer address
+ * r1 holds the size in bytes
+ */
+
+#include <arch/chip.h>
+#include <feedback.h>
+
+#if defined(__NEWLIB__) || defined(__BME__)
+#include <sys/page.h>
+#else
+#include <asm/page.h>
+#endif
+
+#ifdef __tilegx__
+/* Share code among Tile family chips but adjust opcodes appropriately. */
+#define slt cmpltu
+#define bbst blbst
+#define bnezt bnzt
+#endif
+
+#if defined(__tilegx__) && __SIZEOF_POINTER__ == 4
+/* Force 32-bit ops so pointers wrap around appropriately. */
+#define ADD_PTR addx
+#define ADDI_PTR addxi
+#else
+#define ADD_PTR add
+#define ADDI_PTR addi
+#endif
+
+ .section .text.__invalidate_icache, "ax"
+ .global __invalidate_icache
+ .type __invalidate_icache,@function
+ .hidden __invalidate_icache
+ .align 8
+__invalidate_icache:
+ FEEDBACK_ENTER(__invalidate_icache)
+ {
+ ADD_PTR r1, r0, r1 /* end of buffer */
+ blez r1, .Lexit /* skip out if size <= 0 */
+ }
+ {
+ ADDI_PTR r1, r1, -1 /* point to last byte to flush */
+ andi r0, r0, -CHIP_L1I_LINE_SIZE() /* align to cache-line size */
+ }
+ {
+ andi r1, r1, -CHIP_L1I_LINE_SIZE() /* last cache line to flush */
+ mf
+ }
+#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE
+ {
+ moveli r4, CHIP_L1I_CACHE_SIZE() / PAGE_SIZE /* loop counter */
+ move r2, r0 /* remember starting address */
+ }
+#endif
+ drain
+ {
+ slt r3, r0, r1 /* set up loop invariant */
+#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE
+ moveli r6, PAGE_SIZE
+#endif
+ }
+.Lentry:
+ {
+ icoh r0
+ ADDI_PTR r0, r0, CHIP_L1I_LINE_SIZE() /* advance buffer */
+ }
+ {
+ slt r3, r0, r1 /* check if buffer < buffer + size */
+ bbst r3, .Lentry /* loop if buffer < buffer + size */
+ }
+#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE
+ {
+ ADD_PTR r2, r2, r6
+ ADD_PTR r1, r1, r6
+ }
+ {
+ move r0, r2
+ addi r4, r4, -1
+ }
+ {
+ slt r3, r0, r1 /* set up loop invariant */
+ bnezt r4, .Lentry
+ }
+#endif
+ drain
+.Lexit:
+ jrp lr
+
+.Lend___invalidate_icache:
+ .size __invalidate_icache, \
+ .Lend___invalidate_icache - __invalidate_icache
diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c
new file mode 100644
index 000000000000..be1e8acd105d
--- /dev/null
+++ b/arch/tile/lib/atomic_32.c
@@ -0,0 +1,347 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/cache.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <asm/atomic.h>
+#include <arch/chip.h>
+
+/* The routines in atomic_asm.S are private, so we only declare them here. */
+extern struct __get_user __atomic_cmpxchg(volatile int *p,
+ int *lock, int o, int n);
+extern struct __get_user __atomic_xchg(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xchg_add(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xchg_add_unless(volatile int *p,
+ int *lock, int o, int n);
+extern struct __get_user __atomic_or(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n);
+extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n);
+
+extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n);
+extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n);
+extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n);
+extern u64 __atomic64_xchg_add_unless(volatile u64 *p,
+ int *lock, u64 o, u64 n);
+
+
+/* See <asm/atomic.h> */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+/*
+ * A block of memory containing locks for atomic ops. Each instance of this
+ * struct will be homed on a different CPU.
+ */
+struct atomic_locks_on_cpu {
+ int lock[ATOMIC_HASH_L2_SIZE];
+} __attribute__((aligned(ATOMIC_HASH_L2_SIZE * 4)));
+
+static DEFINE_PER_CPU(struct atomic_locks_on_cpu, atomic_lock_pool);
+
+/* The locks we'll use until __init_atomic_per_cpu is called. */
+static struct atomic_locks_on_cpu __initdata initial_atomic_locks;
+
+/* Hash into this vector to get a pointer to lock for the given atomic. */
+struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE]
+ __write_once = {
+ [0 ... ATOMIC_HASH_L1_SIZE-1] (&initial_atomic_locks)
+};
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+/* This page is remapped on startup to be hash-for-home. */
+int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */]
+ __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned")));
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+static inline int *__atomic_hashed_lock(volatile void *v)
+{
+ /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec.S */
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ unsigned long i =
+ (unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long));
+ unsigned long n = __insn_crc32_32(0, i);
+
+ /* Grab high bits for L1 index. */
+ unsigned long l1_index = n >> ((sizeof(n) * 8) - ATOMIC_HASH_L1_SHIFT);
+ /* Grab low bits for L2 index. */
+ unsigned long l2_index = n & (ATOMIC_HASH_L2_SIZE - 1);
+
+ return &atomic_lock_ptr[l1_index]->lock[l2_index];
+#else
+ /*
+ * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index.
+ * Using mm works here because atomic_locks is page aligned.
+ */
+ unsigned long ptr = __insn_mm((unsigned long)v >> 1,
+ (unsigned long)atomic_locks,
+ 2, (ATOMIC_HASH_SHIFT + 2) - 1);
+ return (int *)ptr;
+#endif
+}
+
+#ifdef CONFIG_SMP
+/* Return whether the passed pointer is a valid atomic lock pointer. */
+static int is_atomic_lock(int *p)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ int i;
+ for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+
+ if (p >= &atomic_lock_ptr[i]->lock[0] &&
+ p < &atomic_lock_ptr[i]->lock[ATOMIC_HASH_L2_SIZE]) {
+ return 1;
+ }
+ }
+ return 0;
+#else
+ return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE];
+#endif
+}
+
+void __atomic_fault_unlock(int *irqlock_word)
+{
+ BUG_ON(!is_atomic_lock(irqlock_word));
+ BUG_ON(*irqlock_word != 1);
+ *irqlock_word = 0;
+}
+
+#endif /* CONFIG_SMP */
+
+static inline int *__atomic_setup(volatile void *v)
+{
+ /* Issue a load to the target to bring it into cache. */
+ *(volatile int *)v;
+ return __atomic_hashed_lock(v);
+}
+
+int _atomic_xchg(atomic_t *v, int n)
+{
+ return __atomic_xchg(&v->counter, __atomic_setup(v), n).val;
+}
+EXPORT_SYMBOL(_atomic_xchg);
+
+int _atomic_xchg_add(atomic_t *v, int i)
+{
+ return __atomic_xchg_add(&v->counter, __atomic_setup(v), i).val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add);
+
+int _atomic_xchg_add_unless(atomic_t *v, int a, int u)
+{
+ /*
+ * Note: argument order is switched here since it is easier
+ * to use the first argument consistently as the "old value"
+ * in the assembly, as is done for _atomic_cmpxchg().
+ */
+ return __atomic_xchg_add_unless(&v->counter, __atomic_setup(v), u, a)
+ .val;
+}
+EXPORT_SYMBOL(_atomic_xchg_add_unless);
+
+int _atomic_cmpxchg(atomic_t *v, int o, int n)
+{
+ return __atomic_cmpxchg(&v->counter, __atomic_setup(v), o, n).val;
+}
+EXPORT_SYMBOL(_atomic_cmpxchg);
+
+unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_or((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_or);
+
+unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_andn((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_andn);
+
+unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask)
+{
+ return __atomic_xor((int *)p, __atomic_setup(p), mask).val;
+}
+EXPORT_SYMBOL(_atomic_xor);
+
+
+u64 _atomic64_xchg(atomic64_t *v, u64 n)
+{
+ return __atomic64_xchg(&v->counter, __atomic_setup(v), n);
+}
+EXPORT_SYMBOL(_atomic64_xchg);
+
+u64 _atomic64_xchg_add(atomic64_t *v, u64 i)
+{
+ return __atomic64_xchg_add(&v->counter, __atomic_setup(v), i);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add);
+
+u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u)
+{
+ /*
+ * Note: argument order is switched here since it is easier
+ * to use the first argument consistently as the "old value"
+ * in the assembly, as is done for _atomic_cmpxchg().
+ */
+ return __atomic64_xchg_add_unless(&v->counter, __atomic_setup(v),
+ u, a);
+}
+EXPORT_SYMBOL(_atomic64_xchg_add_unless);
+
+u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n)
+{
+ return __atomic64_cmpxchg(&v->counter, __atomic_setup(v), o, n);
+}
+EXPORT_SYMBOL(_atomic64_cmpxchg);
+
+
+static inline int *__futex_setup(__user int *v)
+{
+ /*
+ * Issue a prefetch to the counter to bring it into cache.
+ * As for __atomic_setup, but we can't do a read into the L1
+ * since it might fault; instead we do a prefetch into the L2.
+ */
+ __insn_prefetch(v);
+ return __atomic_hashed_lock(v);
+}
+
+struct __get_user futex_set(int *v, int i)
+{
+ return __atomic_xchg(v, __futex_setup(v), i);
+}
+
+struct __get_user futex_add(int *v, int n)
+{
+ return __atomic_xchg_add(v, __futex_setup(v), n);
+}
+
+struct __get_user futex_or(int *v, int n)
+{
+ return __atomic_or(v, __futex_setup(v), n);
+}
+
+struct __get_user futex_andn(int *v, int n)
+{
+ return __atomic_andn(v, __futex_setup(v), n);
+}
+
+struct __get_user futex_xor(int *v, int n)
+{
+ return __atomic_xor(v, __futex_setup(v), n);
+}
+
+struct __get_user futex_cmpxchg(int *v, int o, int n)
+{
+ return __atomic_cmpxchg(v, __futex_setup(v), o, n);
+}
+
+/*
+ * If any of the atomic or futex routines hit a bad address (not in
+ * the page tables at kernel PL) this routine is called. The futex
+ * routines are never used on kernel space, and the normal atomics and
+ * bitops are never used on user space. So a fault on kernel space
+ * must be fatal, but a fault on userspace is a futex fault and we
+ * need to return -EFAULT. Note that the context this routine is
+ * invoked in is the context of the "_atomic_xxx()" routines called
+ * by the functions in this file.
+ */
+struct __get_user __atomic_bad_address(int *addr)
+{
+ if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int))))
+ panic("Bad address used for kernel atomic op: %p\n", addr);
+ return (struct __get_user) { .err = -EFAULT };
+}
+
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+static int __init noatomichash(char *str)
+{
+ printk("noatomichash is deprecated.\n");
+ return 1;
+}
+__setup("noatomichash", noatomichash);
+#endif
+
+void __init __init_atomic_per_cpu(void)
+{
+#if ATOMIC_LOCKS_FOUND_VIA_TABLE()
+
+ unsigned int i;
+ int actual_cpu;
+
+ /*
+ * Before this is called from setup, we just have one lock for
+ * all atomic objects/operations. Here we replace the
+ * elements of atomic_lock_ptr so that they point at per_cpu
+ * integers. This seemingly over-complex approach stems from
+ * the fact that DEFINE_PER_CPU defines an entry for each cpu
+ * in the grid, not each cpu from 0..ATOMIC_HASH_SIZE-1. But
+ * for efficient hashing of atomics to their locks we want a
+ * compile time constant power of 2 for the size of this
+ * table, so we use ATOMIC_HASH_SIZE.
+ *
+ * Here we populate atomic_lock_ptr from the per cpu
+ * atomic_lock_pool, interspersing by actual cpu so that
+ * subsequent elements are homed on consecutive cpus.
+ */
+
+ actual_cpu = cpumask_first(cpu_possible_mask);
+
+ for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) {
+ /*
+ * Preincrement to slightly bias against using cpu 0,
+ * which has plenty of stuff homed on it already.
+ */
+ actual_cpu = cpumask_next(actual_cpu, cpu_possible_mask);
+ if (actual_cpu >= nr_cpu_ids)
+ actual_cpu = cpumask_first(cpu_possible_mask);
+
+ atomic_lock_ptr[i] = &per_cpu(atomic_lock_pool, actual_cpu);
+ }
+
+#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+ /* Validate power-of-two and "bigger than cpus" assumption */
+ BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1));
+ BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids);
+
+ /*
+ * On TILEPro we prefer to use a single hash-for-home
+ * page, since this means atomic operations are less
+ * likely to encounter a TLB fault and thus should
+ * in general perform faster. You may wish to disable
+ * this in situations where few hash-for-home tiles
+ * are configured.
+ */
+ BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0);
+
+ /* The locks must all fit on one page. */
+ BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE);
+
+ /*
+ * We use the page offset of the atomic value's address as
+ * an index into atomic_locks, excluding the low 3 bits.
+ * That should not produce more indices than ATOMIC_HASH_SIZE.
+ */
+ BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE);
+
+#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */
+
+ /* The futex code makes this assumption, so we validate it here. */
+ BUG_ON(sizeof(atomic_t) != sizeof(int));
+}
diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S
new file mode 100644
index 000000000000..c0d058578192
--- /dev/null
+++ b/arch/tile/lib/atomic_asm_32.S
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Support routines for atomic operations. Each function takes:
+ *
+ * r0: address to manipulate
+ * r1: pointer to atomic lock guarding this operation (for FUTEX_LOCK_REG)
+ * r2: new value to write, or for cmpxchg/add_unless, value to compare against
+ * r3: (cmpxchg/xchg_add_unless) new value to write or add;
+ * (atomic64 ops) high word of value to write
+ * r4/r5: (cmpxchg64/add_unless64) new value to write or add
+ *
+ * The 32-bit routines return a "struct __get_user" so that the futex code
+ * has an opportunity to return -EFAULT to the user if needed.
+ * The 64-bit routines just return a "long long" with the value,
+ * since they are only used from kernel space and don't expect to fault.
+ * Support for 16-bit ops is included in the framework but we don't provide
+ * any (x86_64 has an atomic_inc_short(), so we might want to some day).
+ *
+ * Note that the caller is advised to issue a suitable L1 or L2
+ * prefetch on the address being manipulated to avoid extra stalls.
+ * In addition, the hot path is on two icache lines, and we start with
+ * a jump to the second line to make sure they are both in cache so
+ * that we never stall waiting on icache fill while holding the lock.
+ * (This doesn't work out with most 64-bit ops, since they consume
+ * too many bundles, so may take an extra i-cache stall.)
+ *
+ * These routines set the INTERRUPT_CRITICAL_SECTION bit, just
+ * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt
+ * the code, just page faults.
+ *
+ * If the load or store faults in a way that can be directly fixed in
+ * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it
+ * directly, return to the instruction that faulted, and retry it.
+ *
+ * If the load or store faults in a way that potentially requires us
+ * to release the atomic lock, then retry (e.g. a migrating PTE), we
+ * reset the PC in do_page_fault_ics() to the "tns" instruction so
+ * that on return we will reacquire the lock and restart the op. We
+ * are somewhat overloading the exception_table_entry notion by doing
+ * this, since those entries are not normally used for migrating PTEs.
+ *
+ * If the main page fault handler discovers a bad address, it will see
+ * the PC pointing to the "tns" instruction (due to the earlier
+ * exception_table_entry processing in do_page_fault_ics), and
+ * re-reset the PC to the fault handler, atomic_bad_address(), which
+ * effectively takes over from the atomic op and can either return a
+ * bad "struct __get_user" (for user addresses) or can just panic (for
+ * bad kernel addresses).
+ *
+ * Note that if the value we would store is the same as what we
+ * loaded, we bypass the load. Other platforms with true atomics can
+ * make the guarantee that a non-atomic __clear_bit(), for example,
+ * can safely race with an atomic test_and_set_bit(); this example is
+ * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do
+ * that on Tile since the "atomic" op is really just a
+ * read/modify/write, and can race with the non-atomic
+ * read/modify/write. However, if we can short-circuit the write when
+ * it is not needed, in the atomic case, we avoid the race.
+ */
+
+#include <linux/linkage.h>
+#include <asm/atomic.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+ .section .text.atomic,"ax"
+ENTRY(__start_atomic_asm_code)
+
+ .macro atomic_op, name, bitwidth, body
+ .align 64
+STD_ENTRY_SECTION(__atomic\name, .text.atomic)
+ {
+ movei r24, 1
+ j 4f /* branch to second cache line */
+ }
+1: {
+ .ifc \bitwidth,16
+ lh r22, r0
+ .else
+ lw r22, r0
+ addi r23, r0, 4
+ .endif
+ }
+ .ifc \bitwidth,64
+ lw r23, r23
+ .endif
+ \body /* set r24, and r25 if 64-bit */
+ {
+ seq r26, r22, r24
+ seq r27, r23, r25
+ }
+ .ifc \bitwidth,64
+ bbnst r27, 2f
+ .endif
+ bbs r26, 3f /* skip write-back if it's the same value */
+2: {
+ .ifc \bitwidth,16
+ sh r0, r24
+ .else
+ sw r0, r24
+ addi r23, r0, 4
+ .endif
+ }
+ .ifc \bitwidth,64
+ sw r23, r25
+ .endif
+ mf
+3: {
+ move r0, r22
+ .ifc \bitwidth,64
+ move r1, r23
+ .else
+ move r1, zero
+ .endif
+ sw ATOMIC_LOCK_REG_NAME, zero
+ }
+ mtspr INTERRUPT_CRITICAL_SECTION, zero
+ jrp lr
+4: {
+ move ATOMIC_LOCK_REG_NAME, r1
+ mtspr INTERRUPT_CRITICAL_SECTION, r24
+ }
+#ifndef CONFIG_SMP
+ j 1b /* no atomic locks */
+#else
+ {
+ tns r21, ATOMIC_LOCK_REG_NAME
+ moveli r23, 2048 /* maximum backoff time in cycles */
+ }
+ {
+ bzt r21, 1b /* branch if lock acquired */
+ moveli r25, 32 /* starting backoff time in cycles */
+ }
+5: mtspr INTERRUPT_CRITICAL_SECTION, zero
+ mfspr r26, CYCLE_LOW /* get start point for this backoff */
+6: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */
+ sub r22, r22, r26
+ slt r22, r22, r25
+ bbst r22, 6b
+ {
+ mtspr INTERRUPT_CRITICAL_SECTION, r24
+ shli r25, r25, 1 /* double the backoff; retry the tns */
+ }
+ {
+ tns r21, ATOMIC_LOCK_REG_NAME
+ slt r26, r23, r25 /* is the proposed backoff too big? */
+ }
+ {
+ bzt r21, 1b /* branch if lock acquired */
+ mvnz r25, r26, r23
+ }
+ j 5b
+#endif
+ STD_ENDPROC(__atomic\name)
+ .ifc \bitwidth,32
+ .pushsection __ex_table,"a"
+ .word 1b, __atomic\name
+ .word 2b, __atomic\name
+ .word __atomic\name, __atomic_bad_address
+ .popsection
+ .endif
+ .endm
+
+atomic_op _cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }"
+atomic_op _xchg, 32, "move r24, r2"
+atomic_op _xchg_add, 32, "add r24, r22, r2"
+atomic_op _xchg_add_unless, 32, \
+ "sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }"
+atomic_op _or, 32, "or r24, r22, r2"
+atomic_op _andn, 32, "nor r2, r2, zero; and r24, r22, r2"
+atomic_op _xor, 32, "xor r24, r22, r2"
+
+atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \
+ { bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }"
+atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }"
+atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \
+ slt_u r26, r24, r22; add r25, r25, r26"
+atomic_op 64_xchg_add_unless, 64, \
+ "{ sne r26, r22, r2; sne r27, r23, r3 }; \
+ { bbns r26, 3f; add r24, r22, r4 }; \
+ { bbns r27, 3f; add r25, r23, r5 }; \
+ slt_u r26, r24, r22; add r25, r25, r26"
+
+ jrp lr /* happy backtracer */
+
+ENTRY(__end_atomic_asm_code)
diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c
new file mode 100644
index 000000000000..e4bab5bd3f31
--- /dev/null
+++ b/arch/tile/lib/checksum.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ * Support code for the main lib/checksum.c.
+ */
+
+#include <net/checksum.h>
+#include <linux/module.h>
+
+static inline unsigned int longto16(unsigned long x)
+{
+ unsigned long ret;
+#ifdef __tilegx__
+ ret = __insn_v2sadu(x, 0);
+ ret = __insn_v2sadu(ret, 0);
+#else
+ ret = __insn_sadh_u(x, 0);
+ ret = __insn_sadh_u(ret, 0);
+#endif
+ return ret;
+}
+
+__wsum do_csum(const unsigned char *buff, int len)
+{
+ int odd, count;
+ unsigned long result = 0;
+
+ if (len <= 0)
+ goto out;
+ odd = 1 & (unsigned long) buff;
+ if (odd) {
+ result = (*buff << 8);
+ len--;
+ buff++;
+ }
+ count = len >> 1; /* nr of 16-bit words.. */
+ if (count) {
+ if (2 & (unsigned long) buff) {
+ result += *(const unsigned short *)buff;
+ count--;
+ len -= 2;
+ buff += 2;
+ }
+ count >>= 1; /* nr of 32-bit words.. */
+ if (count) {
+#ifdef __tilegx__
+ if (4 & (unsigned long) buff) {
+ unsigned int w = *(const unsigned int *)buff;
+ result = __insn_v2sadau(result, w, 0);
+ count--;
+ len -= 4;
+ buff += 4;
+ }
+ count >>= 1; /* nr of 64-bit words.. */
+#endif
+
+ /*
+ * This algorithm could wrap around for very
+ * large buffers, but those should be impossible.
+ */
+ BUG_ON(count >= 65530);
+
+ while (count) {
+ unsigned long w = *(const unsigned long *)buff;
+ count--;
+ buff += sizeof(w);
+#ifdef __tilegx__
+ result = __insn_v2sadau(result, w, 0);
+#else
+ result = __insn_sadah_u(result, w, 0);
+#endif
+ }
+#ifdef __tilegx__
+ if (len & 4) {
+ unsigned int w = *(const unsigned int *)buff;
+ result = __insn_v2sadau(result, w, 0);
+ buff += 4;
+ }
+#endif
+ }
+ if (len & 2) {
+ result += *(const unsigned short *) buff;
+ buff += 2;
+ }
+ }
+ if (len & 1)
+ result += *buff;
+ result = longto16(result);
+ if (odd)
+ result = swab16(result);
+out:
+ return result;
+}
diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c
new file mode 100644
index 000000000000..af745b3b2559
--- /dev/null
+++ b/arch/tile/lib/cpumask.c
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/cpumask.h>
+#include <linux/ctype.h>
+#include <linux/errno.h>
+
+/*
+ * Allow cropping out bits beyond the end of the array.
+ * Move to "lib" directory if more clients want to use this routine.
+ */
+int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits)
+{
+ unsigned a, b;
+
+ bitmap_zero(maskp, nmaskbits);
+ do {
+ if (!isdigit(*bp))
+ return -EINVAL;
+ a = simple_strtoul(bp, (char **)&bp, 10);
+ b = a;
+ if (*bp == '-') {
+ bp++;
+ if (!isdigit(*bp))
+ return -EINVAL;
+ b = simple_strtoul(bp, (char **)&bp, 10);
+ }
+ if (!(a <= b))
+ return -EINVAL;
+ if (b >= nmaskbits)
+ b = nmaskbits-1;
+ while (a <= b) {
+ set_bit(a, maskp);
+ a++;
+ }
+ if (*bp == ',')
+ bp++;
+ } while (*bp != '\0' && *bp != '\n');
+ return 0;
+}
diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c
new file mode 100644
index 000000000000..5801b03c13ef
--- /dev/null
+++ b/arch/tile/lib/delay.c
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/thread_info.h>
+#include <asm/fixmap.h>
+#include <hv/hypervisor.h>
+
+void __udelay(unsigned long usecs)
+{
+ hv_nanosleep(usecs * 1000);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ hv_nanosleep(nsecs);
+}
+EXPORT_SYMBOL(__ndelay);
+
+/* FIXME: should be declared in a header somewhere. */
+EXPORT_SYMBOL(__delay);
diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c
new file mode 100644
index 000000000000..af8e70e2a0ce
--- /dev/null
+++ b/arch/tile/lib/exports.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Exports from assembler code and from libtile-cc.
+ */
+
+#include <linux/module.h>
+
+/* arch/tile/lib/usercopy.S */
+#include <linux/uaccess.h>
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+EXPORT_SYMBOL(strnlen_user_asm);
+EXPORT_SYMBOL(strncpy_from_user_asm);
+EXPORT_SYMBOL(clear_user_asm);
+
+/* arch/tile/kernel/entry.S */
+#include <linux/kernel.h>
+#include <asm/processor.h>
+EXPORT_SYMBOL(current_text_addr);
+EXPORT_SYMBOL(dump_stack);
+
+/* arch/tile/lib/__memcpy.S */
+/* NOTE: on TILE64, these symbols appear in arch/tile/lib/memcpy_tile64.c */
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(__copy_to_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_inatomic);
+EXPORT_SYMBOL(__copy_from_user_zeroing);
+
+/* hypervisor glue */
+#include <hv/hypervisor.h>
+EXPORT_SYMBOL(hv_dev_open);
+EXPORT_SYMBOL(hv_dev_pread);
+EXPORT_SYMBOL(hv_dev_pwrite);
+EXPORT_SYMBOL(hv_dev_close);
+
+/* -ltile-cc */
+uint32_t __udivsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__udivsi3);
+int32_t __divsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__divsi3);
+uint64_t __udivdi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__udivdi3);
+int64_t __divdi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__divdi3);
+uint32_t __umodsi3(uint32_t dividend, uint32_t divisor);
+EXPORT_SYMBOL(__umodsi3);
+int32_t __modsi3(int32_t dividend, int32_t divisor);
+EXPORT_SYMBOL(__modsi3);
+uint64_t __umoddi3(uint64_t dividend, uint64_t divisor);
+EXPORT_SYMBOL(__umoddi3);
+int64_t __moddi3(int64_t dividend, int64_t divisor);
+EXPORT_SYMBOL(__moddi3);
+#ifndef __tilegx__
+uint64_t __ll_mul(uint64_t n0, uint64_t n1);
+EXPORT_SYMBOL(__ll_mul);
+#endif
+#ifndef __tilegx__
+int64_t __muldi3(int64_t, int64_t);
+EXPORT_SYMBOL(__muldi3);
+uint64_t __lshrdi3(uint64_t, unsigned int);
+EXPORT_SYMBOL(__lshrdi3);
+#endif
diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S
new file mode 100644
index 000000000000..989ad7b68d5a
--- /dev/null
+++ b/arch/tile/lib/mb_incoherent.S
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Assembly code for invoking the HV's fence_incoherent syscall.
+ */
+
+#include <linux/linkage.h>
+#include <hv/syscall_public.h>
+#include <arch/abi.h>
+#include <arch/chip.h>
+
+#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS()
+
+/*
+ * Invoke the hypervisor's fence_incoherent syscall, which guarantees
+ * that all victims for cachelines homed on this tile have reached memory.
+ */
+STD_ENTRY(__mb_incoherent)
+ moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent
+ swint2
+ jrp lr
+ STD_ENDPROC(__mb_incoherent)
+
+#endif
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
new file mode 100644
index 000000000000..6235283b4859
--- /dev/null
+++ b/arch/tile/lib/memchr_32.c
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memchr(const void *s, int c, size_t n)
+{
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Create four copies of the byte for which we are looking. */
+ const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+ /* Read the first word, but munge it so that bytes before the array
+ * will not match goal.
+ *
+ * Note that this shift count expression works because we know
+ * shift counts are taken mod 32.
+ */
+ const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+ uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+
+ /* Compute the address of the last byte. */
+ const char *const last_byte_ptr = (const char *)s + n - 1;
+
+ /* Compute the address of the word containing the last byte. */
+ const uint32_t *const last_word_ptr =
+ (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
+
+ uint32_t bits;
+ char *ret;
+
+ if (__builtin_expect(n == 0, 0)) {
+ /* Don't dereference any memory if the array is empty. */
+ return NULL;
+ }
+
+ while ((bits = __insn_seqb(v, goal)) == 0) {
+ if (__builtin_expect(p == last_word_ptr, 0)) {
+ /* We already read the last word in the array,
+ * so give up.
+ */
+ return NULL;
+ }
+ v = *++p;
+ }
+
+ /* We found a match, but it might be in a byte past the end
+ * of the array.
+ */
+ ret = ((char *)p) + (__insn_ctz(bits) >> 3);
+ return (ret <= last_byte_ptr) ? ret : NULL;
+}
+EXPORT_SYMBOL(memchr);
diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S
new file mode 100644
index 000000000000..f92984bf60ec
--- /dev/null
+++ b/arch/tile/lib/memcpy_32.S
@@ -0,0 +1,628 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This file shares the implementation of the userspace memcpy and
+ * the kernel's memcpy, copy_to_user and copy_from_user.
+ */
+
+#include <arch/chip.h>
+
+#if CHIP_HAS_WH64() || defined(MEMCPY_TEST_WH64)
+#define MEMCPY_USE_WH64
+#endif
+
+
+#include <linux/linkage.h>
+
+/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+#define memcpy __memcpy_asm
+#define __copy_to_user_inatomic __copy_to_user_inatomic_asm
+#define __copy_from_user_inatomic __copy_from_user_inatomic_asm
+#define __copy_from_user_zeroing __copy_from_user_zeroing_asm
+#endif
+
+#define IS_MEMCPY 0
+#define IS_COPY_FROM_USER 1
+#define IS_COPY_FROM_USER_ZEROING 2
+#define IS_COPY_TO_USER -1
+
+ .section .text.memcpy_common, "ax"
+ .align 64
+
+/* Use this to preface each bundle that can cause an exception so
+ * the kernel can clean up properly. The special cleanup code should
+ * not use these, since it knows what it is doing.
+ */
+#define EX \
+ .pushsection __ex_table, "a"; \
+ .word 9f, memcpy_common_fixup; \
+ .popsection; \
+ 9
+
+
+/* __copy_from_user_inatomic takes the kernel target address in r0,
+ * the user source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_from_user_inatomic)
+.type __copy_from_user_inatomic, @function
+ FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \
+ .text.memcpy_common, \
+ .Lend_memcpy_common - __copy_from_user_inatomic)
+ { movei r29, IS_COPY_FROM_USER; j memcpy_common }
+ .size __copy_from_user_inatomic, . - __copy_from_user_inatomic
+
+/* __copy_from_user_zeroing is like __copy_from_user_inatomic, but
+ * any uncopiable bytes are zeroed in the target.
+ */
+ENTRY(__copy_from_user_zeroing)
+.type __copy_from_user_zeroing, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common }
+ .size __copy_from_user_zeroing, . - __copy_from_user_zeroing
+
+/* __copy_to_user_inatomic takes the user target address in r0,
+ * the kernel source in r1, and the bytes to copy in r2.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ */
+ENTRY(__copy_to_user_inatomic)
+.type __copy_to_user_inatomic, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_COPY_TO_USER; j memcpy_common }
+ .size __copy_to_user_inatomic, . - __copy_to_user_inatomic
+
+ENTRY(memcpy)
+.type memcpy, @function
+ FEEDBACK_REENTER(__copy_from_user_inatomic)
+ { movei r29, IS_MEMCPY }
+ .size memcpy, . - memcpy
+ /* Fall through */
+
+ .type memcpy_common, @function
+memcpy_common:
+ /* On entry, r29 holds one of the IS_* macro values from above. */
+
+
+ /* r0 is the dest, r1 is the source, r2 is the size. */
+
+ /* Save aside original dest so we can return it at the end. */
+ { sw sp, lr; move r23, r0; or r4, r0, r1 }
+
+ /* Check for an empty size. */
+ { bz r2, .Ldone; andi r4, r4, 3 }
+
+ /* Save aside original values in case of a fault. */
+ { move r24, r1; move r25, r2 }
+ move r27, lr
+
+ /* Check for an unaligned source or dest. */
+ { bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 }
+
+.Lcheck_aligned_copy_size:
+ /* If we are copying < 256 bytes, branch to simple case. */
+ { blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+
+ /* Copying >= 256 bytes, so jump to complex prefetching loop. */
+ { andi r6, r1, 63; j .Lcopy_many }
+
+/*
+ *
+ * Aligned 4 byte at a time copy loop
+ *
+ */
+
+.Lcopy_8_loop:
+ /* Copy two words at a time to hide load latency. */
+EX: { lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 }
+EX: { lw r4, r1; addi r1, r1, 4 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+EX: { sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_8_check:
+ { bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 }
+
+ /* Copy odd leftover word, if any. */
+ { bnzt r4, .Lcheck_odd_stragglers }
+EX: { lw r3, r1; addi r1, r1, 4 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+
+.Lcheck_odd_stragglers:
+ { bnz r2, .Lcopy_unaligned_few }
+
+.Ldone:
+ /* For memcpy return original dest address, else zero. */
+ { mz r0, r29, r23; jrp lr }
+
+
+/*
+ *
+ * Prefetching multiple cache line copy handler (for large transfers).
+ *
+ */
+
+ /* Copy words until r1 is cache-line-aligned. */
+.Lalign_loop:
+EX: { lw r3, r1; addi r1, r1, 4 }
+ { andi r6, r1, 63 }
+EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 }
+.Lcopy_many:
+ { bnzt r6, .Lalign_loop; addi r9, r0, 63 }
+
+ { addi r3, r1, 60; andi r9, r9, -64 }
+
+#ifdef MEMCPY_USE_WH64
+ /* No need to prefetch dst, we'll just do the wh64
+ * right before we copy a line.
+ */
+#endif
+
+EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, .; move r27, lr }
+EX: { lw r6, r3; addi r3, r3, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+EX: { lw r7, r3; addi r3, r3, 64 }
+#ifndef MEMCPY_USE_WH64
+ /* Prefetch the dest */
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ /* Use a real load to cause a TLB miss if necessary. We aren't using
+ * r28, so this should be fine.
+ */
+EX: { lw r28, r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bnzt zero, . }
+ { prefetch r9; addi r9, r9, 64 }
+#endif
+ /* Intentionally stall for a few cycles to leave L2 cache alone. */
+ { bz zero, .Lbig_loop2 }
+
+ /* On entry to this loop:
+ * - r0 points to the start of dst line 0
+ * - r1 points to start of src line 0
+ * - r2 >= (256 - 60), only the first time the loop trips.
+ * - r3 contains r1 + 128 + 60 [pointer to end of source line 2]
+ * This is our prefetch address. When we get near the end
+ * rather than prefetching off the end this is changed to point
+ * to some "safe" recently loaded address.
+ * - r5 contains *(r1 + 60) [i.e. last word of source line 0]
+ * - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1]
+ * - r9 contains ((r0 + 63) & -64)
+ * [start of next dst cache line.]
+ */
+
+.Lbig_loop:
+ { jal .Lcopy_line2; add r15, r1, r2 }
+
+.Lbig_loop2:
+ /* Copy line 0, first stalling until r5 is ready. */
+EX: { move r12, r5; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r5, r3; addi r3, r3, 64 }
+ { jal .Lcopy_line }
+
+ /* Copy line 1, first stalling until r6 is ready. */
+EX: { move r12, r6; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r6, r3; addi r3, r3, 64 }
+ { jal .Lcopy_line }
+
+ /* Copy line 2, first stalling until r7 is ready. */
+EX: { move r12, r7; lw r16, r1 }
+ { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 }
+ /* Prefetch several lines ahead. */
+EX: { lw r7, r3; addi r3, r3, 64 }
+ /* Use up a caches-busy cycle by jumping back to the top of the
+ * loop. Might as well get it out of the way now.
+ */
+ { j .Lbig_loop }
+
+
+ /* On entry:
+ * - r0 points to the destination line.
+ * - r1 points to the source line.
+ * - r3 is the next prefetch address.
+ * - r9 holds the last address used for wh64.
+ * - r12 = WORD_15
+ * - r16 = WORD_0.
+ * - r17 == r1 + 16.
+ * - r27 holds saved lr to restore.
+ *
+ * On exit:
+ * - r0 is incremented by 64.
+ * - r1 is incremented by 64, unless that would point to a word
+ * beyond the end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * - r2 is decremented by 64.
+ * - r3 is unchanged, unless it points to a word beyond the
+ * end of the source array, in which case it is redirected
+ * to point to an arbitrary word already in the cache.
+ * Redirecting is OK since if we are that close to the end
+ * of the array we will not come back to this subroutine
+ * and use the contents of the prefetched address.
+ * - r4 is nonzero iff r2 >= 64.
+ * - r9 is incremented by 64, unless it points beyond the
+ * end of the last full destination cache line, in which
+ * case it is redirected to a "safe address" that can be
+ * clobbered (sp - 64)
+ * - lr contains the value in r27.
+ */
+
+/* r26 unused */
+
+.Lcopy_line:
+ /* TODO: when r3 goes past the end, we would like to redirect it
+ * to prefetch the last partial cache line (if any) just once, for the
+ * benefit of the final cleanup loop. But we don't want to
+ * prefetch that line more than once, or subsequent prefetches
+ * will go into the RTF. But then .Lbig_loop should unconditionally
+ * branch to top of loop to execute final prefetch, and its
+ * nop should become a conditional branch.
+ */
+
+ /* We need two non-memory cycles here to cover the resources
+ * used by the loads initiated by the caller.
+ */
+ { add r15, r1, r2 }
+.Lcopy_line2:
+ { slt_u r13, r3, r15; addi r17, r1, 16 }
+
+ /* NOTE: this will stall for one cycle as L1 is busy. */
+
+ /* Fill second L1D line. */
+EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */
+
+#ifdef MEMCPY_TEST_WH64
+ /* Issue a fake wh64 that clobbers the destination words
+ * with random garbage, for testing.
+ */
+ { movei r19, 64; crc32_32 r10, r2, r9 }
+.Lwh64_test_loop:
+EX: { sw r9, r10; addi r9, r9, 4; addi r19, r19, -4 }
+ { bnzt r19, .Lwh64_test_loop; crc32_32 r10, r10, r19 }
+#elif CHIP_HAS_WH64()
+ /* Prepare destination line for writing. */
+EX: { wh64 r9; addi r9, r9, 64 }
+#else
+ /* Prefetch dest line */
+ { prefetch r9; addi r9, r9, 64 }
+#endif
+ /* Load seven words that are L1D hits to cover wh64 L2 usage. */
+
+ /* Load the three remaining words from the last L1D line, which
+ * we know has already filled the L1D.
+ */
+EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */
+EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */
+EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */
+
+ /* Load the three remaining words from the first L1D line, first
+ * stalling until it has filled by "looking at" r16.
+ */
+EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */
+EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */
+EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */
+
+ /* Load second word from the second L1D line, first
+ * stalling until it has filled by "looking at" r17.
+ */
+EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */
+
+ /* Store last word to the destination line, potentially dirtying it
+ * for the first time, which keeps the L2 busy for two cycles.
+ */
+EX: { sw r10, r12 } /* store(WORD_15) */
+
+ /* Use two L1D hits to cover the sw L2 access above. */
+EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */
+EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */
+
+ /* Fill third L1D line. */
+EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */
+
+ /* Store first L1D line. */
+EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */
+EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */
+EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */
+#ifdef MEMCPY_USE_WH64
+EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */
+#else
+ /* Back up the r9 to a cache line we are already storing to
+ * if it gets past the end of the dest vector. Strictly speaking,
+ * we don't need to back up to the start of a cache line, but it's free
+ * and tidy, so why not?
+ */
+EX: { sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */
+#endif
+ /* Store second L1D line. */
+EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */
+EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */
+EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */
+EX: { sw r0, r12; addi r0, r0, 4 } /* store(WORD_7) */
+
+EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */
+EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */
+EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */
+
+ /* Store third L1D line. */
+EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */
+EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */
+EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */
+EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */
+
+ /* Store rest of fourth L1D line. */
+EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */
+ {
+EX: sw r0, r8 /* store(WORD_13) */
+ addi r0, r0, 4
+ /* Will r2 be > 64 after we subtract 64 below? */
+ shri r4, r2, 7
+ }
+ {
+EX: sw r0, r11 /* store(WORD_14) */
+ addi r0, r0, 8
+ /* Record 64 bytes successfully copied. */
+ addi r2, r2, -64
+ }
+
+ { jrp lr; move lr, r27 }
+
+ /* Convey to the backtrace library that the stack frame is size
+ * zero, and the real return address is on the stack rather than
+ * in 'lr'.
+ */
+ { info 8 }
+
+ .align 64
+.Lcopy_unaligned_maybe_many:
+ /* Skip the setup overhead if we aren't copying many bytes. */
+ { slti_u r8, r2, 20; sub r4, zero, r0 }
+ { bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 }
+ { bz r4, .Ldest_is_word_aligned; add r18, r1, r2 }
+
+/*
+ *
+ * unaligned 4 byte at a time copy handler.
+ *
+ */
+
+ /* Copy single bytes until r0 == 0 mod 4, so we can store words. */
+.Lalign_dest_loop:
+EX: { lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 }
+EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 }
+
+ /* If source and dest are now *both* aligned, do an aligned copy. */
+ { bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 }
+
+.Ldest_is_word_aligned:
+
+#if CHIP_HAS_DWORD_ALIGN()
+EX: { andi r8, r0, 63; lwadd_na r6, r1, 4}
+ { slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned }
+
+ /* This copies unaligned words until either there are fewer
+ * than 4 bytes left to copy, or until the destination pointer
+ * is cache-aligned, whichever comes first.
+ *
+ * On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 4
+ * - r6 is the next aligned word loaded.
+ */
+.Lcopy_unaligned_src_words:
+EX: { lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 }
+ /* stall */
+ { dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 }
+EX: { swadd r0, r6, 4; addi r2, r2, -4 }
+ { bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 }
+ { bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+ /* On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 4 (# of bytes left to store).
+ * - r6 is the next aligned src word value.
+ * - r9 = (r2 < 64U).
+ * - r18 points one byte past the end of source memory.
+ */
+.Ldest_is_L2_line_aligned:
+
+ {
+ /* Not a full cache line remains. */
+ bnz r9, .Lcleanup_unaligned_words
+ move r7, r6
+ }
+
+ /* r2 >= 64 */
+
+ /* Kick off two prefetches, but don't go past the end. */
+ { addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 }
+ { prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+ { mvz r3, r8, r1; addi r8, r3, 64 }
+ { prefetch r3; move r3, r8; slt_u r8, r8, r18 }
+ { mvz r3, r8, r1; movei r17, 0 }
+
+.Lcopy_unaligned_line:
+ /* Prefetch another line. */
+ { prefetch r3; addi r15, r1, 60; addi r3, r3, 64 }
+ /* Fire off a load of the last word we are about to copy. */
+EX: { lw_na r15, r15; slt_u r8, r3, r18 }
+
+EX: { mvz r3, r8, r1; wh64 r0 }
+
+ /* This loop runs twice.
+ *
+ * On entry:
+ * - r17 is even before the first iteration, and odd before
+ * the second. It is incremented inside the loop. Encountering
+ * an even value at the end of the loop makes it stop.
+ */
+.Lcopy_half_an_unaligned_line:
+EX: {
+ /* Stall until the last byte is ready. In the steady state this
+ * guarantees all words to load below will be in the L2 cache, which
+ * avoids shunting the loads to the RTF.
+ */
+ move zero, r15
+ lwadd_na r7, r1, 16
+ }
+EX: { lwadd_na r11, r1, 12 }
+EX: { lwadd_na r14, r1, -24 }
+EX: { lwadd_na r8, r1, 4 }
+EX: { lwadd_na r9, r1, 4 }
+EX: {
+ lwadd_na r10, r1, 8
+ /* r16 = (r2 < 64), after we subtract 32 from r2 below. */
+ slti_u r16, r2, 64 + 32
+ }
+EX: { lwadd_na r12, r1, 4; addi r17, r17, 1 }
+EX: { lwadd_na r13, r1, 8; dword_align r6, r7, r1 }
+EX: { swadd r0, r6, 4; dword_align r7, r8, r1 }
+EX: { swadd r0, r7, 4; dword_align r8, r9, r1 }
+EX: { swadd r0, r8, 4; dword_align r9, r10, r1 }
+EX: { swadd r0, r9, 4; dword_align r10, r11, r1 }
+EX: { swadd r0, r10, 4; dword_align r11, r12, r1 }
+EX: { swadd r0, r11, 4; dword_align r12, r13, r1 }
+EX: { swadd r0, r12, 4; dword_align r13, r14, r1 }
+EX: { swadd r0, r13, 4; addi r2, r2, -32 }
+ { move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line }
+
+ { bzt r16, .Lcopy_unaligned_line; move r7, r6 }
+
+ /* On entry:
+ * - r0 is the next store address.
+ * - r1 points 4 bytes past the load address corresponding to r0.
+ * - r2 >= 0 (# of bytes left to store).
+ * - r7 is the next aligned src word value.
+ */
+.Lcleanup_unaligned_words:
+ /* Handle any trailing bytes. */
+ { bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 }
+ { bzt r8, .Lcopy_unaligned_src_words; move r6, r7 }
+
+ /* Move r1 back to the point where it corresponds to r0. */
+ { addi r1, r1, -4 }
+
+#else /* !CHIP_HAS_DWORD_ALIGN() */
+
+ /* Compute right/left shift counts and load initial source words. */
+ { andi r5, r1, -4; andi r3, r1, 3 }
+EX: { lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 }
+EX: { lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 }
+
+ /* Load and store one word at a time, using shifts and ORs
+ * to correct for the misaligned src.
+ */
+.Lcopy_unaligned_src_loop:
+ { shr r6, r6, r3; shl r8, r7, r4 }
+EX: { lw r7, r5; or r8, r8, r6; move r6, r7 }
+EX: { sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 }
+ { addi r5, r5, 4; slti_u r8, r2, 8 }
+ { bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 }
+
+ { bz r2, .Lcopy_unaligned_done }
+#endif /* !CHIP_HAS_DWORD_ALIGN() */
+
+ /* Fall through */
+
+/*
+ *
+ * 1 byte at a time copy handler.
+ *
+ */
+
+.Lcopy_unaligned_few:
+EX: { lb_u r3, r1; addi r1, r1, 1 }
+EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, .Lcopy_unaligned_few }
+
+.Lcopy_unaligned_done:
+
+ /* For memcpy return original dest address, else zero. */
+ { mz r0, r29, r23; jrp lr }
+
+.Lend_memcpy_common:
+ .size memcpy_common, .Lend_memcpy_common - memcpy_common
+
+ .section .fixup,"ax"
+memcpy_common_fixup:
+ .type memcpy_common_fixup, @function
+
+ /* Skip any bytes we already successfully copied.
+ * r2 (num remaining) is correct, but r0 (dst) and r1 (src)
+ * may not be quite right because of unrolling and prefetching.
+ * So we need to recompute their values as the address just
+ * after the last byte we are sure was successfully loaded and
+ * then stored.
+ */
+
+ /* Determine how many bytes we successfully copied. */
+ { sub r3, r25, r2 }
+
+ /* Add this to the original r0 and r1 to get their new values. */
+ { add r0, r23, r3; add r1, r24, r3 }
+
+ { bzt r29, memcpy_fixup_loop }
+ { blzt r29, copy_to_user_fixup_loop }
+
+copy_from_user_fixup_loop:
+ /* Try copying the rest one byte at a time, expecting a load fault. */
+.Lcfu: { lb_u r3, r1; addi r1, r1, 1 }
+ { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, copy_from_user_fixup_loop }
+
+.Lcopy_from_user_fixup_zero_remainder:
+ { bbs r29, 2f } /* low bit set means IS_COPY_FROM_USER */
+ /* byte-at-a-time loop faulted, so zero the rest. */
+ { move r3, r2; bz r2, 2f /* should be impossible, but handle it. */ }
+1: { sb r0, zero; addi r0, r0, 1; addi r3, r3, -1 }
+ { bnzt r3, 1b }
+2: move lr, r27
+ { move r0, r2; jrp lr }
+
+copy_to_user_fixup_loop:
+ /* Try copying the rest one byte at a time, expecting a store fault. */
+ { lb_u r3, r1; addi r1, r1, 1 }
+.Lctu: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, copy_to_user_fixup_loop }
+.Lcopy_to_user_fixup_done:
+ move lr, r27
+ { move r0, r2; jrp lr }
+
+memcpy_fixup_loop:
+ /* Try copying the rest one byte at a time. We expect a disastrous
+ * fault to happen since we are in fixup code, but let it happen.
+ */
+ { lb_u r3, r1; addi r1, r1, 1 }
+ { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 }
+ { bnzt r2, memcpy_fixup_loop }
+ /* This should be unreachable, we should have faulted again.
+ * But be paranoid and handle it in case some interrupt changed
+ * the TLB or something.
+ */
+ move lr, r27
+ { move r0, r23; jrp lr }
+
+ .size memcpy_common_fixup, . - memcpy_common_fixup
+
+ .section __ex_table,"a"
+ .word .Lcfu, .Lcopy_from_user_fixup_zero_remainder
+ .word .Lctu, .Lcopy_to_user_fixup_done
diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c
new file mode 100644
index 000000000000..4f0047342469
--- /dev/null
+++ b/arch/tile/lib/memcpy_tile64.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/string.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <asm/fixmap.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+
+/* Defined in memcpy.S */
+extern unsigned long __memcpy_asm(void *to, const void *from, unsigned long n);
+extern unsigned long __copy_to_user_inatomic_asm(
+ void __user *to, const void *from, unsigned long n);
+extern unsigned long __copy_from_user_inatomic_asm(
+ void *to, const void __user *from, unsigned long n);
+extern unsigned long __copy_from_user_zeroing_asm(
+ void *to, const void __user *from, unsigned long n);
+
+typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long);
+
+/* Size above which to consider TLB games for performance */
+#define LARGE_COPY_CUTOFF 2048
+
+/* Communicate to the simulator what we are trying to do. */
+#define sim_allow_multiple_caching(b) \
+ __insn_mtspr(SPR_SIM_CONTROL, \
+ SIM_CONTROL_ALLOW_MULTIPLE_CACHING | ((b) << _SIM_CONTROL_OPERATOR_BITS))
+
+/*
+ * Copy memory by briefly enabling incoherent cacheline-at-a-time mode.
+ *
+ * We set up our own source and destination PTEs that we fully control.
+ * This is the only way to guarantee that we don't race with another
+ * thread that is modifying the PTE; we can't afford to try the
+ * copy_{to,from}_user() technique of catching the interrupt, since
+ * we must run with interrupts disabled to avoid the risk of some
+ * other code seeing the incoherent data in our cache. (Recall that
+ * our cache is indexed by PA, so even if the other code doesn't use
+ * our KM_MEMCPY virtual addresses, they'll still hit in cache using
+ * the normal VAs that aren't supposed to hit in cache.)
+ */
+static void memcpy_multicache(void *dest, const void *source,
+ pte_t dst_pte, pte_t src_pte, int len)
+{
+ int idx, i;
+ unsigned long flags, newsrc, newdst, endsrc;
+ pmd_t *pmdp;
+ pte_t *ptep;
+ int cpu = get_cpu();
+
+ /*
+ * Disable interrupts so that we don't recurse into memcpy()
+ * in an interrupt handler, nor accidentally reference
+ * the PA of the source from an interrupt routine. Also
+ * notify the simulator that we're playing games so we don't
+ * generate spurious coherency warnings.
+ */
+ local_irq_save(flags);
+ sim_allow_multiple_caching(1);
+
+ /* Set up the new dest mapping */
+ idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0;
+ newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1));
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst);
+ ptep = pte_offset_kernel(pmdp, newdst);
+ if (pte_val(*ptep) != pte_val(dst_pte)) {
+ set_pte(ptep, dst_pte);
+ local_flush_tlb_page(NULL, newdst, PAGE_SIZE);
+ }
+
+ /* Set up the new source mapping */
+ idx += (KM_MEMCPY0 - KM_MEMCPY1);
+ src_pte = hv_pte_set_nc(src_pte);
+ src_pte = hv_pte_clear_writable(src_pte); /* be paranoid */
+ newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1));
+ pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc);
+ ptep = pte_offset_kernel(pmdp, newsrc);
+ *ptep = src_pte; /* set_pte() would be confused by this */
+ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+ /* Actually move the data. */
+ __memcpy_asm((void *)newdst, (const void *)newsrc, len);
+
+ /*
+ * Remap the source as locally-cached and not OLOC'ed so that
+ * we can inval without also invaling the remote cpu's cache.
+ * This also avoids known errata with inv'ing cacheable oloc data.
+ */
+ src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3);
+ src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */
+ *ptep = src_pte; /* set_pte() would be confused by this */
+ local_flush_tlb_page(NULL, newsrc, PAGE_SIZE);
+
+ /*
+ * Do the actual invalidation, covering the full L2 cache line
+ * at the end since __memcpy_asm() is somewhat aggressive.
+ */
+ __inv_buffer((void *)newsrc, len);
+
+ /*
+ * We're done: notify the simulator that all is back to normal,
+ * and re-enable interrupts and pre-emption.
+ */
+ sim_allow_multiple_caching(0);
+ local_irq_restore(flags);
+ put_cpu_no_resched();
+}
+
+/*
+ * Identify large copies from remotely-cached memory, and copy them
+ * via memcpy_multicache() if they look good, otherwise fall back
+ * to the particular kind of copying passed as the memcpy_t function.
+ */
+static unsigned long fast_copy(void *dest, const void *source, int len,
+ memcpy_t func)
+{
+ /*
+ * Check if it's big enough to bother with. We may end up doing a
+ * small copy via TLB manipulation if we're near a page boundary,
+ * but presumably we'll make it up when we hit the second page.
+ */
+ while (len >= LARGE_COPY_CUTOFF) {
+ int copy_size, bytes_left_on_page;
+ pte_t *src_ptep, *dst_ptep;
+ pte_t src_pte, dst_pte;
+ struct page *src_page, *dst_page;
+
+ /* Is the source page oloc'ed to a remote cpu? */
+retry_source:
+ src_ptep = virt_to_pte(current->mm, (unsigned long)source);
+ if (src_ptep == NULL)
+ break;
+ src_pte = *src_ptep;
+ if (!hv_pte_get_present(src_pte) ||
+ !hv_pte_get_readable(src_pte) ||
+ hv_pte_get_mode(src_pte) != HV_PTE_MODE_CACHE_TILE_L3)
+ break;
+ if (get_remote_cache_cpu(src_pte) == smp_processor_id())
+ break;
+ src_page = pfn_to_page(hv_pte_get_pfn(src_pte));
+ get_page(src_page);
+ if (pte_val(src_pte) != pte_val(*src_ptep)) {
+ put_page(src_page);
+ goto retry_source;
+ }
+ if (pte_huge(src_pte)) {
+ /* Adjust the PTE to correspond to a small page */
+ int pfn = hv_pte_get_pfn(src_pte);
+ pfn += (((unsigned long)source & (HPAGE_SIZE-1))
+ >> PAGE_SHIFT);
+ src_pte = pfn_pte(pfn, src_pte);
+ src_pte = pte_mksmall(src_pte);
+ }
+
+ /* Is the destination page writable? */
+retry_dest:
+ dst_ptep = virt_to_pte(current->mm, (unsigned long)dest);
+ if (dst_ptep == NULL) {
+ put_page(src_page);
+ break;
+ }
+ dst_pte = *dst_ptep;
+ if (!hv_pte_get_present(dst_pte) ||
+ !hv_pte_get_writable(dst_pte)) {
+ put_page(src_page);
+ break;
+ }
+ dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte));
+ if (dst_page == src_page) {
+ /*
+ * Source and dest are on the same page; this
+ * potentially exposes us to incoherence if any
+ * part of src and dest overlap on a cache line.
+ * Just give up rather than trying to be precise.
+ */
+ put_page(src_page);
+ break;
+ }
+ get_page(dst_page);
+ if (pte_val(dst_pte) != pte_val(*dst_ptep)) {
+ put_page(dst_page);
+ goto retry_dest;
+ }
+ if (pte_huge(dst_pte)) {
+ /* Adjust the PTE to correspond to a small page */
+ int pfn = hv_pte_get_pfn(dst_pte);
+ pfn += (((unsigned long)dest & (HPAGE_SIZE-1))
+ >> PAGE_SHIFT);
+ dst_pte = pfn_pte(pfn, dst_pte);
+ dst_pte = pte_mksmall(dst_pte);
+ }
+
+ /* All looks good: create a cachable PTE and copy from it */
+ copy_size = len;
+ bytes_left_on_page =
+ PAGE_SIZE - (((int)source) & (PAGE_SIZE-1));
+ if (copy_size > bytes_left_on_page)
+ copy_size = bytes_left_on_page;
+ bytes_left_on_page =
+ PAGE_SIZE - (((int)dest) & (PAGE_SIZE-1));
+ if (copy_size > bytes_left_on_page)
+ copy_size = bytes_left_on_page;
+ memcpy_multicache(dest, source, dst_pte, src_pte, copy_size);
+
+ /* Release the pages */
+ put_page(dst_page);
+ put_page(src_page);
+
+ /* Continue on the next page */
+ dest += copy_size;
+ source += copy_size;
+ len -= copy_size;
+ }
+
+ return func(dest, source, len);
+}
+
+void *memcpy(void *to, const void *from, __kernel_size_t n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return (void *)__memcpy_asm(to, from, n);
+ else
+ return (void *)fast_copy(to, from, n, __memcpy_asm);
+}
+
+unsigned long __copy_to_user_inatomic(void __user *to, const void *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_to_user_inatomic_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_to_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_inatomic(void *to, const void __user *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_from_user_inatomic_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_from_user_inatomic_asm);
+}
+
+unsigned long __copy_from_user_zeroing(void *to, const void __user *from,
+ unsigned long n)
+{
+ if (n < LARGE_COPY_CUTOFF)
+ return __copy_from_user_zeroing_asm(to, from, n);
+ else
+ return fast_copy(to, from, n, __copy_from_user_zeroing_asm);
+}
+
+#endif /* !CHIP_HAS_COHERENT_LOCAL_CACHE() */
diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove_32.c
new file mode 100644
index 000000000000..f09d8c4523ec
--- /dev/null
+++ b/arch/tile/lib/memmove_32.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+void *memmove(void *dest, const void *src, size_t n)
+{
+ if ((const char *)src >= (char *)dest + n
+ || (char *)dest >= (const char *)src + n) {
+ /* We found no overlap, so let memcpy do all the heavy
+ * lifting (prefetching, etc.)
+ */
+ return memcpy(dest, src, n);
+ }
+
+ if (n != 0) {
+ const uint8_t *in;
+ uint8_t x;
+ uint8_t *out;
+ int stride;
+
+ if (src < dest) {
+ /* copy backwards */
+ in = (const uint8_t *)src + n - 1;
+ out = (uint8_t *)dest + n - 1;
+ stride = -1;
+ } else {
+ /* copy forwards */
+ in = (const uint8_t *)src;
+ out = (uint8_t *)dest;
+ stride = 1;
+ }
+
+ /* Manually software-pipeline this loop. */
+ x = *in;
+ in += stride;
+
+ while (--n != 0) {
+ *out = x;
+ out += stride;
+ x = *in;
+ in += stride;
+ }
+
+ *out = x;
+ }
+
+ return dest;
+}
+EXPORT_SYMBOL(memmove);
diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c
new file mode 100644
index 000000000000..8593bc82398a
--- /dev/null
+++ b/arch/tile/lib/memset_32.c
@@ -0,0 +1,274 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <arch/chip.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+
+void *memset(void *s, int c, size_t n)
+{
+ uint32_t *out32;
+ int n32;
+ uint32_t v16, v32;
+ uint8_t *out8 = s;
+#if !CHIP_HAS_WH64()
+ int ahead32;
+#else
+ int to_align32;
+#endif
+
+ /* Experimentation shows that a trivial tight loop is a win up until
+ * around a size of 20, where writing a word at a time starts to win.
+ */
+#define BYTE_CUTOFF 20
+
+#if BYTE_CUTOFF < 3
+ /* This must be at least at least this big, or some code later
+ * on doesn't work.
+ */
+#error "BYTE_CUTOFF is too small"
+#endif
+
+ if (n < BYTE_CUTOFF) {
+ /* Strangely, this turns out to be the tightest way to
+ * write this loop.
+ */
+ if (n != 0) {
+ do {
+ /* Strangely, combining these into one line
+ * performs worse.
+ */
+ *out8 = c;
+ out8++;
+ } while (--n != 0);
+ }
+
+ return s;
+ }
+
+#if !CHIP_HAS_WH64()
+ /* Use a spare issue slot to start prefetching the first cache
+ * line early. This instruction is free as the store can be buried
+ * in otherwise idle issue slots doing ALU ops.
+ */
+ __insn_prefetch(out8);
+
+ /* We prefetch the end so that a short memset that spans two cache
+ * lines gets some prefetching benefit. Again we believe this is free
+ * to issue.
+ */
+ __insn_prefetch(&out8[n - 1]);
+#endif /* !CHIP_HAS_WH64() */
+
+
+ /* Align 'out8'. We know n >= 3 so this won't write past the end. */
+ while (((uintptr_t) out8 & 3) != 0) {
+ *out8++ = c;
+ --n;
+ }
+
+ /* Align 'n'. */
+ while (n & 3)
+ out8[--n] = c;
+
+ out32 = (uint32_t *) out8;
+ n32 = n >> 2;
+
+ /* Tile input byte out to 32 bits. */
+ v16 = __insn_intlb(c, c);
+ v32 = __insn_intlh(v16, v16);
+
+ /* This must be at least 8 or the following loop doesn't work. */
+#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4)
+
+#if !CHIP_HAS_WH64()
+
+ ahead32 = CACHE_LINE_SIZE_IN_WORDS;
+
+ /* We already prefetched the first and last cache lines, so
+ * we only need to do more prefetching if we are storing
+ * to more than two cache lines.
+ */
+ if (n32 > CACHE_LINE_SIZE_IN_WORDS * 2) {
+ int i;
+
+ /* Prefetch the next several cache lines.
+ * This is the setup code for the software-pipelined
+ * loop below.
+ */
+#define MAX_PREFETCH 5
+ ahead32 = n32 & -CACHE_LINE_SIZE_IN_WORDS;
+ if (ahead32 > MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS)
+ ahead32 = MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS;
+
+ for (i = CACHE_LINE_SIZE_IN_WORDS;
+ i < ahead32; i += CACHE_LINE_SIZE_IN_WORDS)
+ __insn_prefetch(&out32[i]);
+ }
+
+ if (n32 > ahead32) {
+ while (1) {
+ int j;
+
+ /* Prefetch by reading one word several cache lines
+ * ahead. Since loads are non-blocking this will
+ * cause the full cache line to be read while we are
+ * finishing earlier cache lines. Using a store
+ * here causes microarchitectural performance
+ * problems where a victimizing store miss goes to
+ * the head of the retry FIFO and locks the pipe for
+ * a few cycles. So a few subsequent stores in this
+ * loop go into the retry FIFO, and then later
+ * stores see other stores to the same cache line
+ * are already in the retry FIFO and themselves go
+ * into the retry FIFO, filling it up and grinding
+ * to a halt waiting for the original miss to be
+ * satisfied.
+ */
+ __insn_prefetch(&out32[ahead32]);
+
+#if 1
+#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0
+#error "Unhandled CACHE_LINE_SIZE_IN_WORDS"
+#endif
+
+ n32 -= CACHE_LINE_SIZE_IN_WORDS;
+
+ /* Save icache space by only partially unrolling
+ * this loop.
+ */
+ for (j = CACHE_LINE_SIZE_IN_WORDS / 4; j > 0; j--) {
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ }
+#else
+ /* Unfortunately, due to a code generator flaw this
+ * allocates a separate register for each of these
+ * stores, which requires a large number of spills,
+ * which makes this procedure enormously bigger
+ * (something like 70%)
+ */
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ n32 -= 16;
+#endif
+
+ /* To save compiled code size, reuse this loop even
+ * when we run out of prefetching to do by dropping
+ * ahead32 down.
+ */
+ if (n32 <= ahead32) {
+ /* Not even a full cache line left,
+ * so stop now.
+ */
+ if (n32 < CACHE_LINE_SIZE_IN_WORDS)
+ break;
+
+ /* Choose a small enough value that we don't
+ * prefetch past the end. There's no sense
+ * in touching cache lines we don't have to.
+ */
+ ahead32 = CACHE_LINE_SIZE_IN_WORDS - 1;
+ }
+ }
+ }
+
+#else /* CHIP_HAS_WH64() */
+
+ /* Determine how many words we need to emit before the 'out32'
+ * pointer becomes aligned modulo the cache line size.
+ */
+ to_align32 =
+ (-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1);
+
+ /* Only bother aligning and using wh64 if there is at least
+ * one full cache line to process. This check also prevents
+ * overrunning the end of the buffer with alignment words.
+ */
+ if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) {
+ int lines_left;
+
+ /* Align out32 mod the cache line size so we can use wh64. */
+ n32 -= to_align32;
+ for (; to_align32 != 0; to_align32--) {
+ *out32 = v32;
+ out32++;
+ }
+
+ /* Use unsigned divide to turn this into a right shift. */
+ lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS;
+
+ do {
+ /* Only wh64 a few lines at a time, so we don't
+ * exceed the maximum number of victim lines.
+ */
+ int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS())
+ ? lines_left
+ : CHIP_MAX_OUTSTANDING_VICTIMS());
+ uint32_t *wh = out32;
+ int i = x;
+ int j;
+
+ lines_left -= x;
+
+ do {
+ __insn_wh64(wh);
+ wh += CACHE_LINE_SIZE_IN_WORDS;
+ } while (--i);
+
+ for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4); j != 0; j--) {
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ *out32++ = v32;
+ }
+ } while (lines_left != 0);
+
+ /* We processed all full lines above, so only this many
+ * words remain to be processed.
+ */
+ n32 &= CACHE_LINE_SIZE_IN_WORDS - 1;
+ }
+
+#endif /* CHIP_HAS_WH64() */
+
+ /* Now handle any leftover values. */
+ if (n32 != 0) {
+ do {
+ *out32 = v32;
+ out32++;
+ } while (--n32 != 0);
+ }
+
+ return s;
+}
+EXPORT_SYMBOL(memset);
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
new file mode 100644
index 000000000000..485e24d62c6b
--- /dev/null
+++ b/arch/tile/lib/spinlock_32.c
@@ -0,0 +1,221 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <asm/processor.h>
+
+#include "spinlock_common.h"
+
+void arch_spin_lock(arch_spinlock_t *lock)
+{
+ int my_ticket;
+ int iterations = 0;
+ int delta;
+
+ while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1)
+ delay_backoff(iterations++);
+
+ /* Increment the next ticket number, implicitly releasing tns lock. */
+ lock->next_ticket = my_ticket + TICKET_QUANTUM;
+
+ /* Wait until it's our turn. */
+ while ((delta = my_ticket - lock->current_ticket) != 0)
+ relax((128 / CYCLES_PER_RELAX_LOOP) * delta);
+}
+EXPORT_SYMBOL(arch_spin_lock);
+
+int arch_spin_trylock(arch_spinlock_t *lock)
+{
+ /*
+ * Grab a ticket; no need to retry if it's busy, we'll just
+ * treat that the same as "locked", since someone else
+ * will lock it momentarily anyway.
+ */
+ int my_ticket = __insn_tns((void *)&lock->next_ticket);
+
+ if (my_ticket == lock->current_ticket) {
+ /* Not currently locked, so lock it by keeping this ticket. */
+ lock->next_ticket = my_ticket + TICKET_QUANTUM;
+ /* Success! */
+ return 1;
+ }
+
+ if (!(my_ticket & 1)) {
+ /* Release next_ticket. */
+ lock->next_ticket = my_ticket;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(arch_spin_trylock);
+
+void arch_spin_unlock_wait(arch_spinlock_t *lock)
+{
+ u32 iterations = 0;
+ while (arch_spin_is_locked(lock))
+ delay_backoff(iterations++);
+}
+EXPORT_SYMBOL(arch_spin_unlock_wait);
+
+/*
+ * The low byte is always reserved to be the marker for a "tns" operation
+ * since the low bit is set to "1" by a tns. The next seven bits are
+ * zeroes. The next byte holds the "next" writer value, i.e. the ticket
+ * available for the next task that wants to write. The third byte holds
+ * the current writer value, i.e. the writer who holds the current ticket.
+ * If current == next == 0, there are no interested writers.
+ */
+#define WR_NEXT_SHIFT _WR_NEXT_SHIFT
+#define WR_CURR_SHIFT _WR_CURR_SHIFT
+#define WR_WIDTH _WR_WIDTH
+#define WR_MASK ((1 << WR_WIDTH) - 1)
+
+/*
+ * The last eight bits hold the active reader count. This has to be
+ * zero before a writer can start to write.
+ */
+#define RD_COUNT_SHIFT _RD_COUNT_SHIFT
+#define RD_COUNT_WIDTH _RD_COUNT_WIDTH
+#define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1)
+
+
+/* Lock the word, spinning until there are no tns-ers. */
+static inline u32 get_rwlock(arch_rwlock_t *rwlock)
+{
+ u32 iterations = 0;
+ for (;;) {
+ u32 val = __insn_tns((int *)&rwlock->lock);
+ if (unlikely(val & 1)) {
+ delay_backoff(iterations++);
+ continue;
+ }
+ return val;
+ }
+}
+
+int arch_read_trylock_slow(arch_rwlock_t *rwlock)
+{
+ u32 val = get_rwlock(rwlock);
+ int locked = (val << RD_COUNT_WIDTH) == 0;
+ rwlock->lock = val + (locked << RD_COUNT_SHIFT);
+ return locked;
+}
+EXPORT_SYMBOL(arch_read_trylock_slow);
+
+void arch_read_unlock_slow(arch_rwlock_t *rwlock)
+{
+ u32 val = get_rwlock(rwlock);
+ rwlock->lock = val - (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_unlock_slow);
+
+void arch_write_unlock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ u32 eq, mask = 1 << WR_CURR_SHIFT;
+ while (unlikely(val & 1)) {
+ /* Limited backoff since we are the highest-priority task. */
+ relax(4);
+ val = __insn_tns((int *)&rwlock->lock);
+ }
+ val = __insn_addb(val, mask);
+ eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT));
+ val = __insn_mz(eq & mask, val);
+ rwlock->lock = val;
+}
+EXPORT_SYMBOL(arch_write_unlock_slow);
+
+/*
+ * We spin until everything but the reader bits (which are in the high
+ * part of the word) are zero, i.e. no active or waiting writers, no tns.
+ *
+ * ISSUE: This approach can permanently starve readers. A reader who sees
+ * a writer could instead take a ticket lock (just like a writer would),
+ * and atomically enter read mode (with 1 reader) when it gets the ticket.
+ * This way both readers and writers will always make forward progress
+ * in a finite time.
+ */
+void arch_read_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ u32 iterations = 0;
+ do {
+ if (!(val & 1))
+ rwlock->lock = val;
+ delay_backoff(iterations++);
+ val = __insn_tns((int *)&rwlock->lock);
+ } while ((val << RD_COUNT_WIDTH) != 0);
+ rwlock->lock = val + (1 << RD_COUNT_SHIFT);
+}
+EXPORT_SYMBOL(arch_read_lock_slow);
+
+void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
+{
+ /*
+ * The trailing underscore on this variable (and curr_ below)
+ * reminds us that the high bits are garbage; we mask them out
+ * when we compare them.
+ */
+ u32 my_ticket_;
+
+ /* Take out the next ticket; this will also stop would-be readers. */
+ if (val & 1)
+ val = get_rwlock(rwlock);
+ rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+
+ /* Extract my ticket value from the original word. */
+ my_ticket_ = val >> WR_NEXT_SHIFT;
+
+ /*
+ * Wait until the "current" field matches our ticket, and
+ * there are no remaining readers.
+ */
+ for (;;) {
+ u32 curr_ = val >> WR_CURR_SHIFT;
+ u32 readers = val >> RD_COUNT_SHIFT;
+ u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+ if (likely(delta == 0))
+ break;
+
+ /* Delay based on how many lock-holders are still out there. */
+ relax((256 / CYCLES_PER_RELAX_LOOP) * delta);
+
+ /*
+ * Get a non-tns value to check; we don't need to tns
+ * it ourselves. Since we're not tns'ing, we retry
+ * more rapidly to get a valid value.
+ */
+ while ((val = rwlock->lock) & 1)
+ relax(4);
+ }
+}
+EXPORT_SYMBOL(arch_write_lock_slow);
+
+int __tns_atomic_acquire(atomic_t *lock)
+{
+ int ret;
+ u32 iterations = 0;
+
+ BUG_ON(__insn_mfspr(SPR_INTERRUPT_CRITICAL_SECTION));
+ __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1);
+
+ while ((ret = __insn_tns((void *)&lock->counter)) == 1)
+ delay_backoff(iterations++);
+ return ret;
+}
+
+void __tns_atomic_release(atomic_t *p, int v)
+{
+ p->counter = v;
+ __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0);
+}
diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h
new file mode 100644
index 000000000000..8dffebde6630
--- /dev/null
+++ b/arch/tile/lib/spinlock_common.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ * This file is included into spinlock_32.c or _64.c.
+ */
+
+/*
+ * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop
+ * overhead.
+ */
+#ifdef __tilegx__
+#define CYCLES_PER_RELAX_LOOP 7
+#else
+#define CYCLES_PER_RELAX_LOOP 8
+#endif
+
+/*
+ * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles.
+ */
+static inline void
+relax(int iterations)
+{
+ for (/*above*/; iterations > 0; iterations--)
+ __insn_mfspr(SPR_PASS);
+ barrier();
+}
+
+/* Perform bounded exponential backoff.*/
+void delay_backoff(int iterations)
+{
+ u32 exponent, loops;
+
+ /*
+ * 2^exponent is how many times we go around the loop,
+ * which takes 8 cycles. We want to start with a 16- to 31-cycle
+ * loop, so we need to go around minimum 2 = 2^1 times, so we
+ * bias the original value up by 1.
+ */
+ exponent = iterations + 1;
+
+ /*
+ * Don't allow exponent to exceed 7, so we have 128 loops,
+ * or 1,024 (to 2,047) cycles, as our maximum.
+ */
+ if (exponent > 8)
+ exponent = 8;
+
+ loops = 1 << exponent;
+
+ /* Add a randomness factor so two cpus never get in lock step. */
+ loops += __insn_crc32_32(stack_pointer, get_cycles_low()) &
+ (loops - 1);
+
+ relax(1 << exponent);
+}
diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c
new file mode 100644
index 000000000000..c94e6f7ae7b5
--- /dev/null
+++ b/arch/tile/lib/strchr_32.c
@@ -0,0 +1,66 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+#undef strchr
+
+char *strchr(const char *s, int c)
+{
+ int z, g;
+
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Create four copies of the byte for which we are looking. */
+ const uint32_t goal = 0x01010101 * (uint8_t) c;
+
+ /* Read the first aligned word, but force bytes before the string to
+ * match neither zero nor goal (we make sure the high bit of each
+ * byte is 1, and the low 7 bits are all the opposite of the goal
+ * byte).
+ *
+ * Note that this shift count expression works because we know shift
+ * counts are taken mod 32.
+ */
+ const uint32_t before_mask = (1 << (s_int << 3)) - 1;
+ uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1));
+
+ uint32_t zero_matches, goal_matches;
+ while (1) {
+ /* Look for a terminating '\0'. */
+ zero_matches = __insn_seqb(v, 0);
+
+ /* Look for the goal byte. */
+ goal_matches = __insn_seqb(v, goal);
+
+ if (__builtin_expect(zero_matches | goal_matches, 0))
+ break;
+
+ v = *++p;
+ }
+
+ z = __insn_ctz(zero_matches);
+ g = __insn_ctz(goal_matches);
+
+ /* If we found c before '\0' we got a match. Note that if c == '\0'
+ * then g == z, and we correctly return the address of the '\0'
+ * rather than NULL.
+ */
+ return (g <= z) ? ((char *)p) + (g >> 3) : NULL;
+}
+EXPORT_SYMBOL(strchr);
diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c
new file mode 100644
index 000000000000..f26f88e11e4a
--- /dev/null
+++ b/arch/tile/lib/strlen_32.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/module.h>
+
+size_t strlen(const char *s)
+{
+ /* Get an aligned pointer. */
+ const uintptr_t s_int = (uintptr_t) s;
+ const uint32_t *p = (const uint32_t *)(s_int & -4);
+
+ /* Read the first word, but force bytes before the string to be nonzero.
+ * This expression works because we know shift counts are taken mod 32.
+ */
+ uint32_t v = *p | ((1 << (s_int << 3)) - 1);
+
+ uint32_t bits;
+ while ((bits = __insn_seqb(v, 0)) == 0)
+ v = *++p;
+
+ return ((const char *)p) + (__insn_ctz(bits) >> 3) - s;
+}
+EXPORT_SYMBOL(strlen);
diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c
new file mode 100644
index 000000000000..9ae182568b77
--- /dev/null
+++ b/arch/tile/lib/uaccess.c
@@ -0,0 +1,31 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/uaccess.h>
+#include <linux/module.h>
+
+int __range_ok(unsigned long addr, unsigned long size)
+{
+ unsigned long limit = current_thread_info()->addr_limit.seg;
+ __chk_user_ptr(addr);
+ return !((addr < limit && size <= limit - addr) ||
+ is_arch_mappable_range(addr, size));
+}
+EXPORT_SYMBOL(__range_ok);
+
+void copy_from_user_overflow(void)
+{
+ WARN(1, "Buffer overflow detected!\n");
+}
+EXPORT_SYMBOL(copy_from_user_overflow);
diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S
new file mode 100644
index 000000000000..979f76d83746
--- /dev/null
+++ b/arch/tile/lib/usercopy_32.S
@@ -0,0 +1,223 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/errno.h>
+#include <asm/cache.h>
+#include <arch/chip.h>
+
+/* Access user memory, but use MMU to avoid propagating kernel exceptions. */
+
+ .pushsection .fixup,"ax"
+
+get_user_fault:
+ { move r0, zero; move r1, zero }
+ { movei r2, -EFAULT; jrp lr }
+ ENDPROC(get_user_fault)
+
+put_user_fault:
+ { movei r0, -EFAULT; jrp lr }
+ ENDPROC(put_user_fault)
+
+ .popsection
+
+/*
+ * __get_user_N functions take a pointer in r0, and return 0 in r2
+ * on success, with the value in r0; or else -EFAULT in r2.
+ */
+#define __get_user_N(bytes, LOAD) \
+ STD_ENTRY(__get_user_##bytes); \
+1: { LOAD r0, r0; move r1, zero; move r2, zero }; \
+ jrp lr; \
+ STD_ENDPROC(__get_user_##bytes); \
+ .pushsection __ex_table,"a"; \
+ .word 1b, get_user_fault; \
+ .popsection
+
+__get_user_N(1, lb_u)
+__get_user_N(2, lh_u)
+__get_user_N(4, lw)
+
+/*
+ * __get_user_8 takes a pointer in r0, and returns 0 in r2
+ * on success, with the value in r0/r1; or else -EFAULT in r2.
+ */
+ STD_ENTRY(__get_user_8);
+1: { lw r0, r0; addi r1, r0, 4 };
+2: { lw r1, r1; move r2, zero };
+ jrp lr;
+ STD_ENDPROC(__get_user_8);
+ .pushsection __ex_table,"a";
+ .word 1b, get_user_fault;
+ .word 2b, get_user_fault;
+ .popsection
+
+/*
+ * __put_user_N functions take a value in r0 and a pointer in r1,
+ * and return 0 in r0 on success or -EFAULT on failure.
+ */
+#define __put_user_N(bytes, STORE) \
+ STD_ENTRY(__put_user_##bytes); \
+1: { STORE r1, r0; move r0, zero }; \
+ jrp lr; \
+ STD_ENDPROC(__put_user_##bytes); \
+ .pushsection __ex_table,"a"; \
+ .word 1b, put_user_fault; \
+ .popsection
+
+__put_user_N(1, sb)
+__put_user_N(2, sh)
+__put_user_N(4, sw)
+
+/*
+ * __put_user_8 takes a value in r0/r1 and a pointer in r2,
+ * and returns 0 in r0 on success or -EFAULT on failure.
+ */
+STD_ENTRY(__put_user_8)
+1: { sw r2, r0; addi r2, r2, 4 }
+2: { sw r2, r1; move r0, zero }
+ jrp lr
+ STD_ENDPROC(__put_user_8)
+ .pushsection __ex_table,"a"
+ .word 1b, put_user_fault
+ .word 2b, put_user_fault
+ .popsection
+
+
+/*
+ * strnlen_user_asm takes the pointer in r0, and the length bound in r1.
+ * It returns the length, including the terminating NUL, or zero on exception.
+ * If length is greater than the bound, returns one plus the bound.
+ */
+STD_ENTRY(strnlen_user_asm)
+ { bz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */
+1: { lb_u r4, r0; addi r1, r1, -1 }
+ bz r4, 2f
+ { bnzt r1, 1b; addi r0, r0, 1 }
+2: { sub r0, r0, r3; jrp lr }
+ STD_ENDPROC(strnlen_user_asm)
+ .pushsection .fixup,"ax"
+strnlen_user_fault:
+ { move r0, zero; jrp lr }
+ ENDPROC(strnlen_user_fault)
+ .section __ex_table,"a"
+ .word 1b, strnlen_user_fault
+ .popsection
+
+/*
+ * strncpy_from_user_asm takes the kernel target pointer in r0,
+ * the userspace source pointer in r1, and the length bound (including
+ * the trailing NUL) in r2. On success, it returns the string length
+ * (not including the trailing NUL), or -EFAULT on failure.
+ */
+STD_ENTRY(strncpy_from_user_asm)
+ { bz r2, 2f; move r3, r0 }
+1: { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 }
+ { sb r0, r4; addi r0, r0, 1 }
+ bz r2, 2f
+ bnzt r4, 1b
+ addi r0, r0, -1 /* don't count the trailing NUL */
+2: { sub r0, r0, r3; jrp lr }
+ STD_ENDPROC(strncpy_from_user_asm)
+ .pushsection .fixup,"ax"
+strncpy_from_user_fault:
+ { movei r0, -EFAULT; jrp lr }
+ ENDPROC(strncpy_from_user_fault)
+ .section __ex_table,"a"
+ .word 1b, strncpy_from_user_fault
+ .popsection
+
+/*
+ * clear_user_asm takes the user target address in r0 and the
+ * number of bytes to zero in r1.
+ * It returns the number of uncopiable bytes (hopefully zero) in r0.
+ * Note that we don't use a separate .fixup section here since we fall
+ * through into the "fixup" code as the last straight-line bundle anyway.
+ */
+STD_ENTRY(clear_user_asm)
+ { bz r1, 2f; or r2, r0, r1 }
+ andi r2, r2, 3
+ bzt r2, .Lclear_aligned_user_asm
+1: { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 }
+ bnzt r1, 1b
+2: { move r0, r1; jrp lr }
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+.Lclear_aligned_user_asm:
+1: { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 }
+ bnzt r1, 1b
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(clear_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * flush_user_asm takes the user target address in r0 and the
+ * number of bytes to flush in r1.
+ * It returns the number of unflushable bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(flush_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() }
+ { addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(flush_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * inv_user_asm takes the user target address in r0 and the
+ * number of bytes to invalidate in r1.
+ * It returns the number of not inv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(inv_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() }
+ { addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(inv_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
+
+/*
+ * finv_user_asm takes the user target address in r0 and the
+ * number of bytes to flush-invalidate in r1.
+ * It returns the number of not finv'able bytes (hopefully zero) in r0.
+ */
+STD_ENTRY(finv_user_asm)
+ bz r1, 2f
+ { movei r2, L2_CACHE_BYTES; add r1, r0, r1 }
+ { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 }
+ { and r0, r0, r2; and r1, r1, r2 }
+ { sub r1, r1, r0 }
+1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() }
+ { addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b }
+2: { move r0, r1; jrp lr }
+ STD_ENDPROC(finv_user_asm)
+ .pushsection __ex_table,"a"
+ .word 1b, 2b
+ .popsection
diff --git a/arch/tile/mm/Makefile b/arch/tile/mm/Makefile
new file mode 100644
index 000000000000..e252aeddc17d
--- /dev/null
+++ b/arch/tile/mm/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux tile-specific parts of the memory manager.
+#
+
+obj-y := init.o pgtable.o fault.o extable.o elf.o \
+ mmap.o homecache.o migrate_$(BITS).o
+
+obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_HIGHMEM) += highmem.o
diff --git a/arch/tile/mm/elf.c b/arch/tile/mm/elf.c
new file mode 100644
index 000000000000..818c9bef060c
--- /dev/null
+++ b/arch/tile/mm/elf.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/binfmts.h>
+#include <linux/compat.h>
+#include <linux/mman.h>
+#include <linux/elf.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+
+/* Notify a running simulator, if any, that an exec just occurred. */
+static void sim_notify_exec(const char *binary_name)
+{
+ unsigned char c;
+ do {
+ c = *binary_name++;
+ __insn_mtspr(SPR_SIM_CONTROL,
+ (SIM_CONTROL_OS_EXEC
+ | (c << _SIM_CONTROL_OPERATOR_BITS)));
+
+ } while (c);
+}
+
+static int notify_exec(void)
+{
+ int retval = 0; /* failure */
+ struct vm_area_struct *vma = current->mm->mmap;
+ while (vma) {
+ if ((vma->vm_flags & VM_EXECUTABLE) && vma->vm_file)
+ break;
+ vma = vma->vm_next;
+ }
+ if (vma) {
+ char *buf = (char *) __get_free_page(GFP_KERNEL);
+ if (buf) {
+ char *path = d_path(&vma->vm_file->f_path,
+ buf, PAGE_SIZE);
+ if (!IS_ERR(path)) {
+ sim_notify_exec(path);
+ retval = 1;
+ }
+ free_page((unsigned long)buf);
+ }
+ }
+ return retval;
+}
+
+/* Notify a running simulator, if any, that we loaded an interpreter. */
+static void sim_notify_interp(unsigned long load_addr)
+{
+ size_t i;
+ for (i = 0; i < sizeof(load_addr); i++) {
+ unsigned char c = load_addr >> (i * 8);
+ __insn_mtspr(SPR_SIM_CONTROL,
+ (SIM_CONTROL_OS_INTERP
+ | (c << _SIM_CONTROL_OPERATOR_BITS)));
+ }
+}
+
+
+/* Kernel address of page used to map read-only kernel data into userspace. */
+static void *vdso_page;
+
+/* One-entry array used for install_special_mapping. */
+static struct page *vdso_pages[1];
+
+int __init vdso_setup(void)
+{
+ extern char __rt_sigreturn[], __rt_sigreturn_end[];
+ vdso_page = (void *)get_zeroed_page(GFP_ATOMIC);
+ memcpy(vdso_page, __rt_sigreturn, __rt_sigreturn_end - __rt_sigreturn);
+ vdso_pages[0] = virt_to_page(vdso_page);
+ return 0;
+}
+device_initcall(vdso_setup);
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ if (vma->vm_private_data == vdso_pages)
+ return "[vdso]";
+#ifndef __tilegx__
+ if (vma->vm_start == MEM_USER_INTRPT)
+ return "[intrpt]";
+#endif
+ return NULL;
+}
+
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int executable_stack)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long vdso_base;
+ int retval = 0;
+
+ /*
+ * Notify the simulator that an exec just occurred.
+ * If we can't find the filename of the mapping, just use
+ * whatever was passed as the linux_binprm filename.
+ */
+ if (!notify_exec())
+ sim_notify_exec(bprm->filename);
+
+ down_write(&mm->mmap_sem);
+
+ /*
+ * MAYWRITE to allow gdb to COW and set breakpoints
+ *
+ * Make sure the vDSO gets into every core dump. Dumping its
+ * contents makes post-mortem fully interpretable later
+ * without matching up the same kernel and hardware config to
+ * see what PC values meant.
+ */
+ vdso_base = VDSO_BASE;
+ retval = install_special_mapping(mm, vdso_base, PAGE_SIZE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
+ VM_ALWAYSDUMP,
+ vdso_pages);
+
+#ifndef __tilegx__
+ /*
+ * Set up a user-interrupt mapping here; the user can't
+ * create one themselves since it is above TASK_SIZE.
+ * We make it unwritable by default, so the model for adding
+ * interrupt vectors always involves an mprotect.
+ */
+ if (!retval) {
+ unsigned long addr = MEM_USER_INTRPT;
+ addr = mmap_region(NULL, addr, INTRPT_SIZE,
+ MAP_FIXED|MAP_ANONYMOUS|MAP_PRIVATE,
+ VM_READ|VM_EXEC|
+ VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC, 0);
+ if (addr > (unsigned long) -PAGE_SIZE)
+ retval = (int) addr;
+ }
+#endif
+
+ up_write(&mm->mmap_sem);
+
+ return retval;
+}
+
+
+void elf_plat_init(struct pt_regs *regs, unsigned long load_addr)
+{
+ /* Zero all registers. */
+ memset(regs, 0, sizeof(*regs));
+
+ /* Report the interpreter's load address. */
+ sim_notify_interp(load_addr);
+}
diff --git a/arch/tile/mm/extable.c b/arch/tile/mm/extable.c
new file mode 100644
index 000000000000..4fb0acb9d154
--- /dev/null
+++ b/arch/tile/mm/extable.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->pc);
+ if (fixup) {
+ regs->pc = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c
new file mode 100644
index 000000000000..9b6b92f07def
--- /dev/null
+++ b/arch/tile/mm/fault.c
@@ -0,0 +1,905 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * From i386 code copyright (C) 1995 Linus Torvalds
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h> /* For unblank_screen() */
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/kprobes.h>
+#include <linux/hugetlb.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+
+#include <asm/system.h>
+#include <asm/pgalloc.h>
+#include <asm/sections.h>
+
+#include <arch/interrupts.h>
+
+/*
+ * Unlock any spinlocks which will prevent us from getting the
+ * message out
+ */
+void bust_spinlocks(int yes)
+{
+ int loglevel_save = console_loglevel;
+
+ if (yes) {
+ oops_in_progress = 1;
+ return;
+ }
+ oops_in_progress = 0;
+ /*
+ * OK, the message is on the console. Now we call printk()
+ * without oops_in_progress set so that printk will give klogd
+ * a poke. Hold onto your hats...
+ */
+ console_loglevel = 15; /* NMI oopser may have shut the console up */
+ printk(" ");
+ console_loglevel = loglevel_save;
+}
+
+static noinline void force_sig_info_fault(int si_signo, int si_code,
+ unsigned long address, int fault_num, struct task_struct *tsk)
+{
+ siginfo_t info;
+
+ if (unlikely(tsk->pid < 2)) {
+ panic("Signal %d (code %d) at %#lx sent to %s!",
+ si_signo, si_code & 0xffff, address,
+ tsk->pid ? "init" : "the idle task");
+ }
+
+ info.si_signo = si_signo;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void __user *)address;
+ info.si_trapno = fault_num;
+ force_sig_info(si_signo, &info, tsk);
+}
+
+#ifndef __tilegx__
+/*
+ * Synthesize the fault a PL0 process would get by doing a word-load of
+ * an unaligned address or a high kernel address. Called indirectly
+ * from sys_cmpxchg() in kernel/intvec.S.
+ */
+int _sys_cmpxchg_badaddr(unsigned long address, struct pt_regs *regs)
+{
+ if (address >= PAGE_OFFSET)
+ force_sig_info_fault(SIGSEGV, SEGV_MAPERR, address,
+ INT_DTLB_MISS, current);
+ else
+ force_sig_info_fault(SIGBUS, BUS_ADRALN, address,
+ INT_UNALIGN_DATA, current);
+
+ /*
+ * Adjust pc to point at the actual instruction, which is unusual
+ * for syscalls normally, but is appropriate when we are claiming
+ * that a syscall swint1 caused a page fault or bus error.
+ */
+ regs->pc -= 8;
+
+ /*
+ * Mark this as a caller-save interrupt, like a normal page fault,
+ * so that when we go through the signal handler path we will
+ * properly restore r0, r1, and r2 for the signal handler arguments.
+ */
+ regs->flags |= PT_FLAGS_CALLER_SAVES;
+
+ return 0;
+}
+#endif
+
+static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address)
+{
+ unsigned index = pgd_index(address);
+ pgd_t *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+
+ pgd += index;
+ pgd_k = init_mm.pgd + index;
+
+ if (!pgd_present(*pgd_k))
+ return NULL;
+
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ return NULL;
+
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ return NULL;
+ if (!pmd_present(*pmd)) {
+ set_pmd(pmd, *pmd_k);
+ arch_flush_lazy_mmu_mode();
+ } else
+ BUG_ON(pmd_ptfn(*pmd) != pmd_ptfn(*pmd_k));
+ return pmd_k;
+}
+
+/*
+ * Handle a fault on the vmalloc or module mapping area
+ */
+static inline int vmalloc_fault(pgd_t *pgd, unsigned long address)
+{
+ pmd_t *pmd_k;
+ pte_t *pte_k;
+
+ /* Make sure we are in vmalloc area */
+ if (!(address >= VMALLOC_START && address < VMALLOC_END))
+ return -1;
+
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ */
+ pmd_k = vmalloc_sync_one(pgd, address);
+ if (!pmd_k)
+ return -1;
+ if (pmd_huge(*pmd_k))
+ return 0; /* support TILE huge_vmap() API */
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ return -1;
+ return 0;
+}
+
+/* Wait until this PTE has completed migration. */
+static void wait_for_migration(pte_t *pte)
+{
+ if (pte_migrating(*pte)) {
+ /*
+ * Wait until the migrater fixes up this pte.
+ * We scale the loop count by the clock rate so we'll wait for
+ * a few seconds here.
+ */
+ int retries = 0;
+ int bound = get_clock_rate();
+ while (pte_migrating(*pte)) {
+ barrier();
+ if (++retries > bound)
+ panic("Hit migrating PTE (%#llx) and"
+ " page PFN %#lx still migrating",
+ pte->val, pte_pfn(*pte));
+ }
+ }
+}
+
+/*
+ * It's not generally safe to use "current" to get the page table pointer,
+ * since we might be running an oprofile interrupt in the middle of a
+ * task switch.
+ */
+static pgd_t *get_current_pgd(void)
+{
+ HV_Context ctx = hv_inquire_context();
+ unsigned long pgd_pfn = ctx.page_table >> PAGE_SHIFT;
+ struct page *pgd_page = pfn_to_page(pgd_pfn);
+ BUG_ON(PageHighMem(pgd_page)); /* oops, HIGHPTE? */
+ return (pgd_t *) __va(ctx.page_table);
+}
+
+/*
+ * We can receive a page fault from a migrating PTE at any time.
+ * Handle it by just waiting until the fault resolves.
+ *
+ * It's also possible to get a migrating kernel PTE that resolves
+ * itself during the downcall from hypervisor to Linux. We just check
+ * here to see if the PTE seems valid, and if so we retry it.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may be in an
+ * interrupt or a critical region, and must do as little as possible.
+ * Similarly, we can't use atomic ops here, since we may be handling a
+ * fault caused by an atomic op access.
+ */
+static int handle_migrating_pte(pgd_t *pgd, int fault_num,
+ unsigned long address,
+ int is_kernel_mode, int write)
+{
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ pte_t pteval;
+
+ if (pgd_addr_invalid(address))
+ return 0;
+
+ pgd += pgd_index(address);
+ pud = pud_offset(pgd, address);
+ if (!pud || !pud_present(*pud))
+ return 0;
+ pmd = pmd_offset(pud, address);
+ if (!pmd || !pmd_present(*pmd))
+ return 0;
+ pte = pmd_huge_page(*pmd) ? ((pte_t *)pmd) :
+ pte_offset_kernel(pmd, address);
+ pteval = *pte;
+ if (pte_migrating(pteval)) {
+ wait_for_migration(pte);
+ return 1;
+ }
+
+ if (!is_kernel_mode || !pte_present(pteval))
+ return 0;
+ if (fault_num == INT_ITLB_MISS) {
+ if (pte_exec(pteval))
+ return 1;
+ } else if (write) {
+ if (pte_write(pteval))
+ return 1;
+ } else {
+ if (pte_read(pteval))
+ return 1;
+ }
+
+ return 0;
+}
+
+/*
+ * This routine is responsible for faulting in user pages.
+ * It passes the work off to one of the appropriate routines.
+ * It returns true if the fault was successfully handled.
+ */
+static int handle_page_fault(struct pt_regs *regs,
+ int fault_num,
+ int is_page_fault,
+ unsigned long address,
+ int write)
+{
+ struct task_struct *tsk;
+ struct mm_struct *mm;
+ struct vm_area_struct *vma;
+ unsigned long stack_offset;
+ int fault;
+ int si_code;
+ int is_kernel_mode;
+ pgd_t *pgd;
+
+ /* on TILE, protection faults are always writes */
+ if (!is_page_fault)
+ write = 1;
+
+ is_kernel_mode = (EX1_PL(regs->ex1) != USER_PL);
+
+ tsk = validate_current();
+
+ /*
+ * Check to see if we might be overwriting the stack, and bail
+ * out if so. The page fault code is a relatively likely
+ * place to get trapped in an infinite regress, and once we
+ * overwrite the whole stack, it becomes very hard to recover.
+ */
+ stack_offset = stack_pointer & (THREAD_SIZE-1);
+ if (stack_offset < THREAD_SIZE / 8) {
+ printk(KERN_ALERT "Potential stack overrun: sp %#lx\n",
+ stack_pointer);
+ show_regs(regs);
+ printk(KERN_ALERT "Killing current process %d/%s\n",
+ tsk->pid, tsk->comm);
+ do_group_exit(SIGKILL);
+ }
+
+ /*
+ * Early on, we need to check for migrating PTE entries;
+ * see homecache.c. If we find a migrating PTE, we wait until
+ * the backing page claims to be done migrating, then we procede.
+ * For kernel PTEs, we rewrite the PTE and return and retry.
+ * Otherwise, we treat the fault like a normal "no PTE" fault,
+ * rather than trying to patch up the existing PTE.
+ */
+ pgd = get_current_pgd();
+ if (handle_migrating_pte(pgd, fault_num, address,
+ is_kernel_mode, write))
+ return 1;
+
+ si_code = SEGV_MAPERR;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ *
+ * This verifies that the fault happens in kernel space
+ * and that the fault was not a protection fault.
+ */
+ if (unlikely(address >= TASK_SIZE &&
+ !is_arch_mappable_range(address, 0))) {
+ if (is_kernel_mode && is_page_fault &&
+ vmalloc_fault(pgd, address) >= 0)
+ return 1;
+ /*
+ * Don't take the mm semaphore here. If we fixup a prefetch
+ * fault we could otherwise deadlock.
+ */
+ mm = NULL; /* happy compiler */
+ vma = NULL;
+ goto bad_area_nosemaphore;
+ }
+
+ /*
+ * If we're trying to touch user-space addresses, we must
+ * be either at PL0, or else with interrupts enabled in the
+ * kernel, so either way we can re-enable interrupts here.
+ */
+ local_irq_enable();
+
+ mm = tsk->mm;
+
+ /*
+ * If we're in an interrupt, have no user context or are running in an
+ * atomic region then we must not take the fault.
+ */
+ if (in_atomic() || !mm) {
+ vma = NULL; /* happy compiler */
+ goto bad_area_nosemaphore;
+ }
+
+ /*
+ * When running in the kernel we expect faults to occur only to
+ * addresses in user space. All other faults represent errors in the
+ * kernel and should generate an OOPS. Unfortunately, in the case of an
+ * erroneous fault occurring in a code path which already holds mmap_sem
+ * we will deadlock attempting to validate the fault against the
+ * address space. Luckily the kernel only validly references user
+ * space from well defined areas of code, which are listed in the
+ * exceptions table.
+ *
+ * As the vast majority of faults will be valid we will only perform
+ * the source reference check when there is a possibility of a deadlock.
+ * Attempt to lock the address space, if we cannot we then validate the
+ * source. If this is invalid we can skip the address space check,
+ * thus avoiding the deadlock.
+ */
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (is_kernel_mode &&
+ !search_exception_tables(regs->pc)) {
+ vma = NULL; /* happy compiler */
+ goto bad_area_nosemaphore;
+ }
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+ if (regs->sp < PAGE_OFFSET) {
+ /*
+ * accessing the stack below sp is always a bug.
+ */
+ if (address < regs->sp)
+ goto bad_area;
+ }
+ if (expand_stack(vma, address))
+ goto bad_area;
+
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ si_code = SEGV_ACCERR;
+ if (fault_num == INT_ITLB_MISS) {
+ if (!(vma->vm_flags & VM_EXEC))
+ goto bad_area;
+ } else if (write) {
+#ifdef TEST_VERIFY_AREA
+ if (!is_page_fault && regs->cs == KERNEL_CS)
+ printk("WP fault at "REGFMT"\n", regs->eip);
+#endif
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ } else {
+ if (!is_page_fault || !(vma->vm_flags & VM_READ))
+ goto bad_area;
+ }
+
+ survive:
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, write);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+
+ /*
+ * If this was an asynchronous fault,
+ * restart the appropriate engine.
+ */
+ switch (fault_num) {
+#if CHIP_HAS_TILE_DMA()
+ case INT_DMATLB_MISS:
+ case INT_DMATLB_MISS_DWNCL:
+ case INT_DMATLB_ACCESS:
+ case INT_DMATLB_ACCESS_DWNCL:
+ __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
+ break;
+#endif
+#if CHIP_HAS_SN_PROC()
+ case INT_SNITLB_MISS:
+ case INT_SNITLB_MISS_DWNCL:
+ __insn_mtspr(SPR_SNCTL,
+ __insn_mfspr(SPR_SNCTL) &
+ ~SPR_SNCTL__FRZPROC_MASK);
+ break;
+#endif
+ }
+
+ up_read(&mm->mmap_sem);
+ return 1;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ /* User mode accesses just cause a SIGSEGV */
+ if (!is_kernel_mode) {
+ /*
+ * It's possible to have interrupts off here.
+ */
+ local_irq_enable();
+
+ force_sig_info_fault(SIGSEGV, si_code, address,
+ fault_num, tsk);
+ return 0;
+ }
+
+no_context:
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return 0;
+
+/*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+
+ bust_spinlocks(1);
+
+ /* FIXME: no lookup_address() yet */
+#ifdef SUPPORT_LOOKUP_ADDRESS
+ if (fault_num == INT_ITLB_MISS) {
+ pte_t *pte = lookup_address(address);
+
+ if (pte && pte_present(*pte) && !pte_exec_kernel(*pte))
+ printk(KERN_CRIT "kernel tried to execute"
+ " non-executable page - exploit attempt?"
+ " (uid: %d)\n", current->uid);
+ }
+#endif
+ if (address < PAGE_SIZE)
+ printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference\n");
+ else
+ printk(KERN_ALERT "Unable to handle kernel paging request\n");
+ printk(" at virtual address "REGFMT", pc "REGFMT"\n",
+ address, regs->pc);
+
+ show_regs(regs);
+
+ if (unlikely(tsk->pid < 2)) {
+ panic("Kernel page fault running %s!",
+ tsk->pid ? "init" : "the idle task");
+ }
+
+ /*
+ * More FIXME: we should probably copy the i386 here and
+ * implement a generic die() routine. Not today.
+ */
+#ifdef SUPPORT_DIE
+ die("Oops", regs);
+#endif
+ bust_spinlocks(1);
+
+ do_group_exit(SIGKILL);
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ if (is_global_init(tsk)) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ printk("VM: killing process %s\n", tsk->comm);
+ if (!is_kernel_mode)
+ do_group_exit(SIGKILL);
+ goto no_context;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (is_kernel_mode)
+ goto no_context;
+
+ force_sig_info_fault(SIGBUS, BUS_ADRERR, address, fault_num, tsk);
+ return 0;
+}
+
+#ifndef __tilegx__
+
+extern char sys_cmpxchg[], __sys_cmpxchg_end[];
+extern char __sys_cmpxchg_grab_lock[];
+extern char __start_atomic_asm_code[], __end_atomic_asm_code[];
+
+/*
+ * We return this structure in registers to avoid having to write
+ * additional save/restore code in the intvec.S caller.
+ */
+struct intvec_state {
+ void *handler;
+ unsigned long vecnum;
+ unsigned long fault_num;
+ unsigned long info;
+ unsigned long retval;
+};
+
+/* We must release ICS before panicking or we won't get anywhere. */
+#define ics_panic(fmt, ...) do { \
+ __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); \
+ panic(fmt, __VA_ARGS__); \
+} while (0)
+
+void do_page_fault(struct pt_regs *regs, int fault_num,
+ unsigned long address, unsigned long write);
+
+/*
+ * When we take an ITLB or DTLB fault or access violation in the
+ * supervisor while the critical section bit is set, the hypervisor is
+ * reluctant to write new values into the EX_CONTEXT_1_x registers,
+ * since that might indicate we have not yet squirreled the SPR
+ * contents away and can thus safely take a recursive interrupt.
+ * Accordingly, the hypervisor passes us the PC via SYSTEM_SAVE_1_2.
+ */
+struct intvec_state do_page_fault_ics(struct pt_regs *regs, int fault_num,
+ unsigned long address,
+ unsigned long info)
+{
+ unsigned long pc = info & ~1;
+ int write = info & 1;
+ pgd_t *pgd = get_current_pgd();
+
+ /* Retval is 1 at first since we will handle the fault fully. */
+ struct intvec_state state = {
+ do_page_fault, fault_num, address, write, 1
+ };
+
+ /* Validate that we are plausibly in the right routine. */
+ if ((pc & 0x7) != 0 || pc < PAGE_OFFSET ||
+ (fault_num != INT_DTLB_MISS &&
+ fault_num != INT_DTLB_ACCESS)) {
+ unsigned long old_pc = regs->pc;
+ regs->pc = pc;
+ ics_panic("Bad ICS page fault args:"
+ " old PC %#lx, fault %d/%d at %#lx\n",
+ old_pc, fault_num, write, address);
+ }
+
+ /* We might be faulting on a vmalloc page, so check that first. */
+ if (fault_num != INT_DTLB_ACCESS && vmalloc_fault(pgd, address) >= 0)
+ return state;
+
+ /*
+ * If we faulted with ICS set in sys_cmpxchg, we are providing
+ * a user syscall service that should generate a signal on
+ * fault. We didn't set up a kernel stack on initial entry to
+ * sys_cmpxchg, but instead had one set up by the fault, which
+ * (because sys_cmpxchg never releases ICS) came to us via the
+ * SYSTEM_SAVE_1_2 mechanism, and thus EX_CONTEXT_1_[01] are
+ * still referencing the original user code. We release the
+ * atomic lock and rewrite pt_regs so that it appears that we
+ * came from user-space directly, and after we finish the
+ * fault we'll go back to user space and re-issue the swint.
+ * This way the backtrace information is correct if we need to
+ * emit a stack dump at any point while handling this.
+ *
+ * Must match register use in sys_cmpxchg().
+ */
+ if (pc >= (unsigned long) sys_cmpxchg &&
+ pc < (unsigned long) __sys_cmpxchg_end) {
+#ifdef CONFIG_SMP
+ /* Don't unlock before we could have locked. */
+ if (pc >= (unsigned long)__sys_cmpxchg_grab_lock) {
+ int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
+ __atomic_fault_unlock(lock_ptr);
+ }
+#endif
+ regs->sp = regs->regs[27];
+ }
+
+ /*
+ * We can also fault in the atomic assembly, in which
+ * case we use the exception table to do the first-level fixup.
+ * We may re-fixup again in the real fault handler if it
+ * turns out the faulting address is just bad, and not,
+ * for example, migrating.
+ */
+ else if (pc >= (unsigned long) __start_atomic_asm_code &&
+ pc < (unsigned long) __end_atomic_asm_code) {
+ const struct exception_table_entry *fixup;
+#ifdef CONFIG_SMP
+ /* Unlock the atomic lock. */
+ int *lock_ptr = (int *)(regs->regs[ATOMIC_LOCK_REG]);
+ __atomic_fault_unlock(lock_ptr);
+#endif
+ fixup = search_exception_tables(pc);
+ if (!fixup)
+ ics_panic("ICS atomic fault not in table:"
+ " PC %#lx, fault %d", pc, fault_num);
+ regs->pc = fixup->fixup;
+ regs->ex1 = PL_ICS_EX1(KERNEL_PL, 0);
+ }
+
+ /*
+ * NOTE: the one other type of access that might bring us here
+ * are the memory ops in __tns_atomic_acquire/__tns_atomic_release,
+ * but we don't have to check specially for them since we can
+ * always safely return to the address of the fault and retry,
+ * since no separate atomic locks are involved.
+ */
+
+ /*
+ * Now that we have released the atomic lock (if necessary),
+ * it's safe to spin if the PTE that caused the fault was migrating.
+ */
+ if (fault_num == INT_DTLB_ACCESS)
+ write = 1;
+ if (handle_migrating_pte(pgd, fault_num, address, 1, write))
+ return state;
+
+ /* Return zero so that we continue on with normal fault handling. */
+ state.retval = 0;
+ return state;
+}
+
+#endif /* !__tilegx__ */
+
+/*
+ * This routine handles page faults. It determines the address, and the
+ * problem, and then passes it handle_page_fault() for normal DTLB and
+ * ITLB issues, and for DMA or SN processor faults when we are in user
+ * space. For the latter, if we're in kernel mode, we just save the
+ * interrupt away appropriately and return immediately. We can't do
+ * page faults for user code while in kernel mode.
+ */
+void do_page_fault(struct pt_regs *regs, int fault_num,
+ unsigned long address, unsigned long write)
+{
+ int is_page_fault;
+
+ /* This case should have been handled by do_page_fault_ics(). */
+ BUG_ON(write & ~1);
+
+#if CHIP_HAS_TILE_DMA()
+ /*
+ * If it's a DMA fault, suspend the transfer while we're
+ * handling the miss; we'll restart after it's handled. If we
+ * don't suspend, it's possible that this process could swap
+ * out and back in, and restart the engine since the DMA is
+ * still 'running'.
+ */
+ if (fault_num == INT_DMATLB_MISS ||
+ fault_num == INT_DMATLB_ACCESS ||
+ fault_num == INT_DMATLB_MISS_DWNCL ||
+ fault_num == INT_DMATLB_ACCESS_DWNCL) {
+ __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
+ while (__insn_mfspr(SPR_DMA_USER_STATUS) &
+ SPR_DMA_STATUS__BUSY_MASK)
+ ;
+ }
+#endif
+
+ /* Validate fault num and decide if this is a first-time page fault. */
+ switch (fault_num) {
+ case INT_ITLB_MISS:
+ case INT_DTLB_MISS:
+#if CHIP_HAS_TILE_DMA()
+ case INT_DMATLB_MISS:
+ case INT_DMATLB_MISS_DWNCL:
+#endif
+#if CHIP_HAS_SN_PROC()
+ case INT_SNITLB_MISS:
+ case INT_SNITLB_MISS_DWNCL:
+#endif
+ is_page_fault = 1;
+ break;
+
+ case INT_DTLB_ACCESS:
+#if CHIP_HAS_TILE_DMA()
+ case INT_DMATLB_ACCESS:
+ case INT_DMATLB_ACCESS_DWNCL:
+#endif
+ is_page_fault = 0;
+ break;
+
+ default:
+ panic("Bad fault number %d in do_page_fault", fault_num);
+ }
+
+ if (EX1_PL(regs->ex1) != USER_PL) {
+ struct async_tlb *async;
+ switch (fault_num) {
+#if CHIP_HAS_TILE_DMA()
+ case INT_DMATLB_MISS:
+ case INT_DMATLB_ACCESS:
+ case INT_DMATLB_MISS_DWNCL:
+ case INT_DMATLB_ACCESS_DWNCL:
+ async = &current->thread.dma_async_tlb;
+ break;
+#endif
+#if CHIP_HAS_SN_PROC()
+ case INT_SNITLB_MISS:
+ case INT_SNITLB_MISS_DWNCL:
+ async = &current->thread.sn_async_tlb;
+ break;
+#endif
+ default:
+ async = NULL;
+ }
+ if (async) {
+
+ /*
+ * No vmalloc check required, so we can allow
+ * interrupts immediately at this point.
+ */
+ local_irq_enable();
+
+ set_thread_flag(TIF_ASYNC_TLB);
+ if (async->fault_num != 0) {
+ panic("Second async fault %d;"
+ " old fault was %d (%#lx/%ld)",
+ fault_num, async->fault_num,
+ address, write);
+ }
+ BUG_ON(fault_num == 0);
+ async->fault_num = fault_num;
+ async->is_fault = is_page_fault;
+ async->is_write = write;
+ async->address = address;
+ return;
+ }
+ }
+
+ handle_page_fault(regs, fault_num, is_page_fault, address, write);
+}
+
+
+#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC()
+/*
+ * Check an async_tlb structure to see if a deferred fault is waiting,
+ * and if so pass it to the page-fault code.
+ */
+static void handle_async_page_fault(struct pt_regs *regs,
+ struct async_tlb *async)
+{
+ if (async->fault_num) {
+ /*
+ * Clear async->fault_num before calling the page-fault
+ * handler so that if we re-interrupt before returning
+ * from the function we have somewhere to put the
+ * information from the new interrupt.
+ */
+ int fault_num = async->fault_num;
+ async->fault_num = 0;
+ handle_page_fault(regs, fault_num, async->is_fault,
+ async->address, async->is_write);
+ }
+}
+#endif /* CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() */
+
+
+/*
+ * This routine effectively re-issues asynchronous page faults
+ * when we are returning to user space.
+ */
+void do_async_page_fault(struct pt_regs *regs)
+{
+ /*
+ * Clear thread flag early. If we re-interrupt while processing
+ * code here, we will reset it and recall this routine before
+ * returning to user space.
+ */
+ clear_thread_flag(TIF_ASYNC_TLB);
+
+#if CHIP_HAS_TILE_DMA()
+ handle_async_page_fault(regs, &current->thread.dma_async_tlb);
+#endif
+#if CHIP_HAS_SN_PROC()
+ handle_async_page_fault(regs, &current->thread.sn_async_tlb);
+#endif
+}
+
+void vmalloc_sync_all(void)
+{
+#ifdef __tilegx__
+ /* Currently all L1 kernel pmd's are static and shared. */
+ BUG_ON(pgd_index(VMALLOC_END) != pgd_index(VMALLOC_START));
+#else
+ /*
+ * Note that races in the updates of insync and start aren't
+ * problematic: insync can only get set bits added, and updates to
+ * start are only improving performance (without affecting correctness
+ * if undone).
+ */
+ static DECLARE_BITMAP(insync, PTRS_PER_PGD);
+ static unsigned long start = PAGE_OFFSET;
+ unsigned long address;
+
+ BUILD_BUG_ON(PAGE_OFFSET & ~PGDIR_MASK);
+ for (address = start; address >= PAGE_OFFSET; address += PGDIR_SIZE) {
+ if (!test_bit(pgd_index(address), insync)) {
+ unsigned long flags;
+ struct list_head *pos;
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ list_for_each(pos, &pgd_list)
+ if (!vmalloc_sync_one(list_to_pgd(pos),
+ address)) {
+ /* Must be at first entry in list. */
+ BUG_ON(pos != pgd_list.next);
+ break;
+ }
+ spin_unlock_irqrestore(&pgd_lock, flags);
+ if (pos != pgd_list.next)
+ set_bit(pgd_index(address), insync);
+ }
+ if (address == start && test_bit(pgd_index(address), insync))
+ start = address + PGDIR_SIZE;
+ }
+#endif
+}
diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c
new file mode 100644
index 000000000000..1fcecc5b9e03
--- /dev/null
+++ b/arch/tile/mm/highmem.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/highmem.h>
+#include <linux/module.h>
+#include <linux/pagemap.h>
+#include <asm/homecache.h>
+
+#define kmap_get_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)),\
+ (vaddr)), (vaddr))
+
+
+void *kmap(struct page *page)
+{
+ void *kva;
+ unsigned long flags;
+ pte_t *ptep;
+
+ might_sleep();
+ if (!PageHighMem(page))
+ return page_address(page);
+ kva = kmap_high(page);
+
+ /*
+ * Rewrite the PTE under the lock. This ensures that the page
+ * is not currently migrating.
+ */
+ ptep = kmap_get_pte((unsigned long)kva);
+ flags = homecache_kpte_lock();
+ set_pte_at(&init_mm, kva, ptep, mk_pte(page, page_to_kpgprot(page)));
+ homecache_kpte_unlock(flags);
+
+ return kva;
+}
+EXPORT_SYMBOL(kmap);
+
+void kunmap(struct page *page)
+{
+ if (in_interrupt())
+ BUG();
+ if (!PageHighMem(page))
+ return;
+ kunmap_high(page);
+}
+EXPORT_SYMBOL(kunmap);
+
+static void debug_kmap_atomic_prot(enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+ static unsigned warn_count = 10;
+
+ if (unlikely(warn_count == 0))
+ return;
+
+ if (unlikely(in_interrupt())) {
+ if (in_irq()) {
+ if (type != KM_IRQ0 && type != KM_IRQ1 &&
+ type != KM_BIO_SRC_IRQ &&
+ /* type != KM_BIO_DST_IRQ && */
+ type != KM_BOUNCE_READ) {
+ WARN_ON(1);
+ warn_count--;
+ }
+ } else if (!irqs_disabled()) { /* softirq */
+ if (type != KM_IRQ0 && type != KM_IRQ1 &&
+ type != KM_SOFTIRQ0 && type != KM_SOFTIRQ1 &&
+ type != KM_SKB_SUNRPC_DATA &&
+ type != KM_SKB_DATA_SOFTIRQ &&
+ type != KM_BOUNCE_READ) {
+ WARN_ON(1);
+ warn_count--;
+ }
+ }
+ }
+
+ if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ ||
+ type == KM_BIO_SRC_IRQ /* || type == KM_BIO_DST_IRQ */) {
+ if (!irqs_disabled()) {
+ WARN_ON(1);
+ warn_count--;
+ }
+ } else if (type == KM_SOFTIRQ0 || type == KM_SOFTIRQ1) {
+ if (irq_count() == 0 && !irqs_disabled()) {
+ WARN_ON(1);
+ warn_count--;
+ }
+ }
+#endif
+}
+
+/*
+ * Describe a single atomic mapping of a page on a given cpu at a
+ * given address, and allow it to be linked into a list.
+ */
+struct atomic_mapped_page {
+ struct list_head list;
+ struct page *page;
+ int cpu;
+ unsigned long va;
+};
+
+static spinlock_t amp_lock = __SPIN_LOCK_UNLOCKED(&amp_lock);
+static struct list_head amp_list = LIST_HEAD_INIT(amp_list);
+
+/*
+ * Combining this structure with a per-cpu declaration lets us give
+ * each cpu an atomic_mapped_page structure per type.
+ */
+struct kmap_amps {
+ struct atomic_mapped_page per_type[KM_TYPE_NR];
+};
+DEFINE_PER_CPU(struct kmap_amps, amps);
+
+/*
+ * Add a page and va, on this cpu, to the list of kmap_atomic pages,
+ * and write the new pte to memory. Writing the new PTE under the
+ * lock guarantees that it is either on the list before migration starts
+ * (if we won the race), or set_pte() sets the migrating bit in the PTE
+ * (if we lost the race). And doing it under the lock guarantees
+ * that when kmap_atomic_fix_one_pte() comes along, it finds a valid
+ * PTE in memory, iff the mapping is still on the amp_list.
+ *
+ * Finally, doing it under the lock lets us safely examine the page
+ * to see if it is immutable or not, for the generic kmap_atomic() case.
+ * If we examine it earlier we are exposed to a race where it looks
+ * writable earlier, but becomes immutable before we write the PTE.
+ */
+static void kmap_atomic_register(struct page *page, enum km_type type,
+ unsigned long va, pte_t *ptep, pte_t pteval)
+{
+ unsigned long flags;
+ struct atomic_mapped_page *amp;
+
+ flags = homecache_kpte_lock();
+ spin_lock(&amp_lock);
+
+ /* With interrupts disabled, now fill in the per-cpu info. */
+ amp = &__get_cpu_var(amps).per_type[type];
+ amp->page = page;
+ amp->cpu = smp_processor_id();
+ amp->va = va;
+
+ /* For generic kmap_atomic(), choose the PTE writability now. */
+ if (!pte_read(pteval))
+ pteval = mk_pte(page, page_to_kpgprot(page));
+
+ list_add(&amp->list, &amp_list);
+ set_pte(ptep, pteval);
+ arch_flush_lazy_mmu_mode();
+
+ spin_unlock(&amp_lock);
+ homecache_kpte_unlock(flags);
+}
+
+/*
+ * Remove a page and va, on this cpu, from the list of kmap_atomic pages.
+ * Linear-time search, but we count on the lists being short.
+ * We don't need to adjust the PTE under the lock (as opposed to the
+ * kmap_atomic_register() case), since we're just unconditionally
+ * zeroing the PTE after it's off the list.
+ */
+static void kmap_atomic_unregister(struct page *page, unsigned long va)
+{
+ unsigned long flags;
+ struct atomic_mapped_page *amp;
+ int cpu = smp_processor_id();
+ spin_lock_irqsave(&amp_lock, flags);
+ list_for_each_entry(amp, &amp_list, list) {
+ if (amp->page == page && amp->cpu == cpu && amp->va == va)
+ break;
+ }
+ BUG_ON(&amp->list == &amp_list);
+ list_del(&amp->list);
+ spin_unlock_irqrestore(&amp_lock, flags);
+}
+
+/* Helper routine for kmap_atomic_fix_kpte(), below. */
+static void kmap_atomic_fix_one_kpte(struct atomic_mapped_page *amp,
+ int finished)
+{
+ pte_t *ptep = kmap_get_pte(amp->va);
+ if (!finished) {
+ set_pte(ptep, pte_mkmigrate(*ptep));
+ flush_remote(0, 0, NULL, amp->va, PAGE_SIZE, PAGE_SIZE,
+ cpumask_of(amp->cpu), NULL, 0);
+ } else {
+ /*
+ * Rewrite a default kernel PTE for this page.
+ * We rely on the fact that set_pte() writes the
+ * present+migrating bits last.
+ */
+ pte_t pte = mk_pte(amp->page, page_to_kpgprot(amp->page));
+ set_pte(ptep, pte);
+ }
+}
+
+/*
+ * This routine is a helper function for homecache_fix_kpte(); see
+ * its comments for more information on the "finished" argument here.
+ *
+ * Note that we hold the lock while doing the remote flushes, which
+ * will stall any unrelated cpus trying to do kmap_atomic operations.
+ * We could just update the PTEs under the lock, and save away copies
+ * of the structs (or just the va+cpu), then flush them after we
+ * release the lock, but it seems easier just to do it all under the lock.
+ */
+void kmap_atomic_fix_kpte(struct page *page, int finished)
+{
+ struct atomic_mapped_page *amp;
+ unsigned long flags;
+ spin_lock_irqsave(&amp_lock, flags);
+ list_for_each_entry(amp, &amp_list, list) {
+ if (amp->page == page)
+ kmap_atomic_fix_one_kpte(amp, finished);
+ }
+ spin_unlock_irqrestore(&amp_lock, flags);
+}
+
+/*
+ * kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap
+ * because the kmap code must perform a global TLB invalidation when
+ * the kmap pool wraps.
+ *
+ * Note that they may be slower than on x86 (etc.) because unlike on
+ * those platforms, we do have to take a global lock to map and unmap
+ * pages on Tile (see above).
+ *
+ * When holding an atomic kmap is is not legal to sleep, so atomic
+ * kmaps are appropriate for short, tight code paths only.
+ */
+void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+ pte_t *pte;
+
+ /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+ pagefault_disable();
+
+ /* Avoid icache flushes by disallowing atomic executable mappings. */
+ BUG_ON(pte_exec(prot));
+
+ if (!PageHighMem(page))
+ return page_address(page);
+
+ debug_kmap_atomic_prot(type);
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ pte = kmap_get_pte(vaddr);
+ BUG_ON(!pte_none(*pte));
+
+ /* Register that this page is mapped atomically on this cpu. */
+ kmap_atomic_register(page, type, vaddr, pte, mk_pte(page, prot));
+
+ return (void *)vaddr;
+}
+EXPORT_SYMBOL(kmap_atomic_prot);
+
+void *kmap_atomic(struct page *page, enum km_type type)
+{
+ /* PAGE_NONE is a magic value that tells us to check immutability. */
+ return kmap_atomic_prot(page, type, PAGE_NONE);
+}
+EXPORT_SYMBOL(kmap_atomic);
+
+void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+ unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+ enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+ /*
+ * Force other mappings to Oops if they try to access this pte without
+ * first remapping it. Keeping stale mappings around is a bad idea.
+ */
+ if (vaddr == __fix_to_virt(FIX_KMAP_BEGIN+idx)) {
+ pte_t *pte = kmap_get_pte(vaddr);
+ pte_t pteval = *pte;
+ BUG_ON(!pte_present(pteval) && !pte_migrating(pteval));
+ kmap_atomic_unregister(pte_page(pteval), vaddr);
+ kpte_clear_flush(pte, vaddr);
+ } else {
+ /* Must be a lowmem page */
+ BUG_ON(vaddr < PAGE_OFFSET);
+ BUG_ON(vaddr >= (unsigned long)high_memory);
+ }
+
+ arch_flush_lazy_mmu_mode();
+ pagefault_enable();
+}
+EXPORT_SYMBOL(kunmap_atomic);
+
+/*
+ * This API is supposed to allow us to map memory without a "struct page".
+ * Currently we don't support this, though this may change in the future.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ return kmap_atomic(pfn_to_page(pfn), type);
+}
+void *kmap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot)
+{
+ return kmap_atomic_prot(pfn_to_page(pfn), type, prot);
+}
+
+struct page *kmap_atomic_to_page(void *ptr)
+{
+ pte_t *pte;
+ unsigned long vaddr = (unsigned long)ptr;
+
+ if (vaddr < FIXADDR_START)
+ return virt_to_page(ptr);
+
+ pte = kmap_get_pte(vaddr);
+ return pte_page(*pte);
+}
diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c
new file mode 100644
index 000000000000..52feb77133ce
--- /dev/null
+++ b/arch/tile/mm/homecache.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This code maintains the "home" for each page in the system.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/bootmem.h>
+#include <linux/rmap.h>
+#include <linux/pagemap.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/pagevec.h>
+#include <linux/ptrace.h>
+#include <linux/timex.h>
+#include <linux/cache.h>
+#include <linux/smp.h>
+
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+#include <asm/homecache.h>
+
+#include "migrate.h"
+
+
+#if CHIP_HAS_COHERENT_LOCAL_CACHE()
+
+/*
+ * The noallocl2 option suppresses all use of the L2 cache to cache
+ * locally from a remote home. There's no point in using it if we
+ * don't have coherent local caching, though.
+ */
+int __write_once noallocl2;
+static int __init set_noallocl2(char *str)
+{
+ noallocl2 = 1;
+ return 0;
+}
+early_param("noallocl2", set_noallocl2);
+
+#else
+
+#define noallocl2 0
+
+#endif
+
+
+
+/* Provide no-op versions of these routines to keep flush_remote() cleaner. */
+#define mark_caches_evicted_start() 0
+#define mark_caches_evicted_finish(mask, timestamp) do {} while (0)
+
+
+
+
+/*
+ * Update the irq_stat for cpus that we are going to interrupt
+ * with TLB or cache flushes. Also handle removing dataplane cpus
+ * from the TLB flush set, and setting dataplane_tlb_state instead.
+ */
+static void hv_flush_update(const struct cpumask *cache_cpumask,
+ struct cpumask *tlb_cpumask,
+ unsigned long tlb_va, unsigned long tlb_length,
+ HV_Remote_ASID *asids, int asidcount)
+{
+ struct cpumask mask;
+ int i, cpu;
+
+ cpumask_clear(&mask);
+ if (cache_cpumask)
+ cpumask_or(&mask, &mask, cache_cpumask);
+ if (tlb_cpumask && tlb_length) {
+ cpumask_or(&mask, &mask, tlb_cpumask);
+ }
+
+ for (i = 0; i < asidcount; ++i)
+ cpumask_set_cpu(asids[i].y * smp_width + asids[i].x, &mask);
+
+ /*
+ * Don't bother to update atomically; losing a count
+ * here is not that critical.
+ */
+ for_each_cpu(cpu, &mask)
+ ++per_cpu(irq_stat, cpu).irq_hv_flush_count;
+}
+
+/*
+ * This wrapper function around hv_flush_remote() does several things:
+ *
+ * - Provides a return value error-checking panic path, since
+ * there's never any good reason for hv_flush_remote() to fail.
+ * - Accepts a 32-bit PFN rather than a 64-bit PA, which generally
+ * is the type that Linux wants to pass around anyway.
+ * - Centralizes the mark_caches_evicted() handling.
+ * - Canonicalizes that lengths of zero make cpumasks NULL.
+ * - Handles deferring TLB flushes for dataplane tiles.
+ * - Tracks remote interrupts in the per-cpu irq_cpustat_t.
+ *
+ * Note that we have to wait until the cache flush completes before
+ * updating the per-cpu last_cache_flush word, since otherwise another
+ * concurrent flush can race, conclude the flush has already
+ * completed, and start to use the page while it's still dirty
+ * remotely (running concurrently with the actual evict, presumably).
+ */
+void flush_remote(unsigned long cache_pfn, unsigned long cache_control,
+ const struct cpumask *cache_cpumask_orig,
+ HV_VirtAddr tlb_va, unsigned long tlb_length,
+ unsigned long tlb_pgsize,
+ const struct cpumask *tlb_cpumask_orig,
+ HV_Remote_ASID *asids, int asidcount)
+{
+ int rc;
+ int timestamp = 0; /* happy compiler */
+ struct cpumask cache_cpumask_copy, tlb_cpumask_copy;
+ struct cpumask *cache_cpumask, *tlb_cpumask;
+ HV_PhysAddr cache_pa;
+ char cache_buf[NR_CPUS*5], tlb_buf[NR_CPUS*5];
+
+ mb(); /* provided just to simplify "magic hypervisor" mode */
+
+ /*
+ * Canonicalize and copy the cpumasks.
+ */
+ if (cache_cpumask_orig && cache_control) {
+ cpumask_copy(&cache_cpumask_copy, cache_cpumask_orig);
+ cache_cpumask = &cache_cpumask_copy;
+ } else {
+ cpumask_clear(&cache_cpumask_copy);
+ cache_cpumask = NULL;
+ }
+ if (cache_cpumask == NULL)
+ cache_control = 0;
+ if (tlb_cpumask_orig && tlb_length) {
+ cpumask_copy(&tlb_cpumask_copy, tlb_cpumask_orig);
+ tlb_cpumask = &tlb_cpumask_copy;
+ } else {
+ cpumask_clear(&tlb_cpumask_copy);
+ tlb_cpumask = NULL;
+ }
+
+ hv_flush_update(cache_cpumask, tlb_cpumask, tlb_va, tlb_length,
+ asids, asidcount);
+ cache_pa = (HV_PhysAddr)cache_pfn << PAGE_SHIFT;
+ if (cache_control & HV_FLUSH_EVICT_L2)
+ timestamp = mark_caches_evicted_start();
+ rc = hv_flush_remote(cache_pa, cache_control,
+ cpumask_bits(cache_cpumask),
+ tlb_va, tlb_length, tlb_pgsize,
+ cpumask_bits(tlb_cpumask),
+ asids, asidcount);
+ if (cache_control & HV_FLUSH_EVICT_L2)
+ mark_caches_evicted_finish(cache_cpumask, timestamp);
+ if (rc == 0)
+ return;
+ cpumask_scnprintf(cache_buf, sizeof(cache_buf), &cache_cpumask_copy);
+ cpumask_scnprintf(tlb_buf, sizeof(tlb_buf), &tlb_cpumask_copy);
+
+ printk("hv_flush_remote(%#llx, %#lx, %p [%s],"
+ " %#lx, %#lx, %#lx, %p [%s], %p, %d) = %d\n",
+ cache_pa, cache_control, cache_cpumask, cache_buf,
+ (unsigned long)tlb_va, tlb_length, tlb_pgsize,
+ tlb_cpumask, tlb_buf,
+ asids, asidcount, rc);
+ if (asidcount > 0) {
+ int i;
+ printk(" asids:");
+ for (i = 0; i < asidcount; ++i)
+ printk(" %d,%d,%d",
+ asids[i].x, asids[i].y, asids[i].asid);
+ printk("\n");
+ }
+ panic("Unsafe to continue.");
+}
+
+void homecache_evict(const struct cpumask *mask)
+{
+ flush_remote(0, HV_FLUSH_EVICT_L2, mask, 0, 0, 0, NULL, NULL, 0);
+}
+
+/* Return a mask of the cpus whose caches currently own these pages. */
+static void homecache_mask(struct page *page, int pages,
+ struct cpumask *home_mask)
+{
+ int i;
+ cpumask_clear(home_mask);
+ for (i = 0; i < pages; ++i) {
+ int home = page_home(&page[i]);
+ if (home == PAGE_HOME_IMMUTABLE ||
+ home == PAGE_HOME_INCOHERENT) {
+ cpumask_copy(home_mask, cpu_possible_mask);
+ return;
+ }
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (home == PAGE_HOME_HASH) {
+ cpumask_or(home_mask, home_mask, &hash_for_home_map);
+ continue;
+ }
+#endif
+ if (home == PAGE_HOME_UNCACHED)
+ continue;
+ BUG_ON(home < 0 || home >= NR_CPUS);
+ cpumask_set_cpu(home, home_mask);
+ }
+}
+
+/*
+ * Return the passed length, or zero if it's long enough that we
+ * believe we should evict the whole L2 cache.
+ */
+static unsigned long cache_flush_length(unsigned long length)
+{
+ return (length >= CHIP_L2_CACHE_SIZE()) ? HV_FLUSH_EVICT_L2 : length;
+}
+
+/* On the simulator, confirm lines have been evicted everywhere. */
+static void validate_lines_evicted(unsigned long pfn, size_t length)
+{
+ sim_syscall(SIM_SYSCALL_VALIDATE_LINES_EVICTED,
+ (HV_PhysAddr)pfn << PAGE_SHIFT, length);
+}
+
+/* Flush a page out of whatever cache(s) it is in. */
+void homecache_flush_cache(struct page *page, int order)
+{
+ int pages = 1 << order;
+ int length = cache_flush_length(pages * PAGE_SIZE);
+ unsigned long pfn = page_to_pfn(page);
+ struct cpumask home_mask;
+
+ homecache_mask(page, pages, &home_mask);
+ flush_remote(pfn, length, &home_mask, 0, 0, 0, NULL, NULL, 0);
+ validate_lines_evicted(pfn, pages * PAGE_SIZE);
+}
+
+
+/* Report the home corresponding to a given PTE. */
+static int pte_to_home(pte_t pte)
+{
+ if (hv_pte_get_nc(pte))
+ return PAGE_HOME_IMMUTABLE;
+ switch (hv_pte_get_mode(pte)) {
+ case HV_PTE_MODE_CACHE_TILE_L3:
+ return get_remote_cache_cpu(pte);
+ case HV_PTE_MODE_CACHE_NO_L3:
+ return PAGE_HOME_INCOHERENT;
+ case HV_PTE_MODE_UNCACHED:
+ return PAGE_HOME_UNCACHED;
+#if CHIP_HAS_CBOX_HOME_MAP()
+ case HV_PTE_MODE_CACHE_HASH_L3:
+ return PAGE_HOME_HASH;
+#endif
+ }
+ panic("Bad PTE %#llx\n", pte.val);
+}
+
+/* Update the home of a PTE if necessary (can also be used for a pgprot_t). */
+pte_t pte_set_home(pte_t pte, int home)
+{
+ /* Check for non-linear file mapping "PTEs" and pass them through. */
+ if (pte_file(pte))
+ return pte;
+
+#if CHIP_HAS_MMIO()
+ /* Check for MMIO mappings and pass them through. */
+ if (hv_pte_get_mode(pte) == HV_PTE_MODE_MMIO)
+ return pte;
+#endif
+
+
+ /*
+ * Only immutable pages get NC mappings. If we have a
+ * non-coherent PTE, but the underlying page is not
+ * immutable, it's likely the result of a forced
+ * caching setting running up against ptrace setting
+ * the page to be writable underneath. In this case,
+ * just keep the PTE coherent.
+ */
+ if (hv_pte_get_nc(pte) && home != PAGE_HOME_IMMUTABLE) {
+ pte = hv_pte_clear_nc(pte);
+ printk("non-immutable page incoherently referenced: %#llx\n",
+ pte.val);
+ }
+
+ switch (home) {
+
+ case PAGE_HOME_UNCACHED:
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED);
+ break;
+
+ case PAGE_HOME_INCOHERENT:
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+ break;
+
+ case PAGE_HOME_IMMUTABLE:
+ /*
+ * We could home this page anywhere, since it's immutable,
+ * but by default just home it to follow "hash_default".
+ */
+ BUG_ON(hv_pte_get_writable(pte));
+ if (pte_get_forcecache(pte)) {
+ /* Upgrade "force any cpu" to "No L3" for immutable. */
+ if (hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_TILE_L3
+ && pte_get_anyhome(pte)) {
+ pte = hv_pte_set_mode(pte,
+ HV_PTE_MODE_CACHE_NO_L3);
+ }
+ } else
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (hash_default)
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
+ else
+#endif
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_NO_L3);
+ pte = hv_pte_set_nc(pte);
+ break;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ case PAGE_HOME_HASH:
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_HASH_L3);
+ break;
+#endif
+
+ default:
+ BUG_ON(home < 0 || home >= NR_CPUS ||
+ !cpu_is_valid_lotar(home));
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_CACHE_TILE_L3);
+ pte = set_remote_cache_cpu(pte, home);
+ break;
+ }
+
+#if CHIP_HAS_NC_AND_NOALLOC_BITS()
+ if (noallocl2)
+ pte = hv_pte_set_no_alloc_l2(pte);
+
+ /* Simplify "no local and no l3" to "uncached" */
+ if (hv_pte_get_no_alloc_l2(pte) && hv_pte_get_no_alloc_l1(pte) &&
+ hv_pte_get_mode(pte) == HV_PTE_MODE_CACHE_NO_L3) {
+ pte = hv_pte_set_mode(pte, HV_PTE_MODE_UNCACHED);
+ }
+#endif
+
+ /* Checking this case here gives a better panic than from the hv. */
+ BUG_ON(hv_pte_get_mode(pte) == 0);
+
+ return pte;
+}
+
+/*
+ * The routines in this section are the "static" versions of the normal
+ * dynamic homecaching routines; they just set the home cache
+ * of a kernel page once, and require a full-chip cache/TLB flush,
+ * so they're not suitable for anything but infrequent use.
+ */
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+static inline int initial_page_home(void) { return PAGE_HOME_HASH; }
+#else
+static inline int initial_page_home(void) { return 0; }
+#endif
+
+int page_home(struct page *page)
+{
+ if (PageHighMem(page)) {
+ return initial_page_home();
+ } else {
+ unsigned long kva = (unsigned long)page_address(page);
+ return pte_to_home(*virt_to_pte(NULL, kva));
+ }
+}
+
+void homecache_change_page_home(struct page *page, int order, int home)
+{
+ int i, pages = (1 << order);
+ unsigned long kva;
+
+ BUG_ON(PageHighMem(page));
+ BUG_ON(page_count(page) > 1);
+ BUG_ON(page_mapcount(page) != 0);
+ kva = (unsigned long) page_address(page);
+ flush_remote(0, HV_FLUSH_EVICT_L2, &cpu_cacheable_map,
+ kva, pages * PAGE_SIZE, PAGE_SIZE, cpu_online_mask,
+ NULL, 0);
+
+ for (i = 0; i < pages; ++i, kva += PAGE_SIZE) {
+ pte_t *ptep = virt_to_pte(NULL, kva);
+ pte_t pteval = *ptep;
+ BUG_ON(!pte_present(pteval) || pte_huge(pteval));
+ *ptep = pte_set_home(pteval, home);
+ }
+}
+
+struct page *homecache_alloc_pages(gfp_t gfp_mask,
+ unsigned int order, int home)
+{
+ struct page *page;
+ BUG_ON(gfp_mask & __GFP_HIGHMEM); /* must be lowmem */
+ page = alloc_pages(gfp_mask, order);
+ if (page)
+ homecache_change_page_home(page, order, home);
+ return page;
+}
+
+struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask,
+ unsigned int order, int home)
+{
+ struct page *page;
+ BUG_ON(gfp_mask & __GFP_HIGHMEM); /* must be lowmem */
+ page = alloc_pages_node(nid, gfp_mask, order);
+ if (page)
+ homecache_change_page_home(page, order, home);
+ return page;
+}
+
+void homecache_free_pages(unsigned long addr, unsigned int order)
+{
+ struct page *page;
+
+ if (addr == 0)
+ return;
+
+ VM_BUG_ON(!virt_addr_valid((void *)addr));
+ page = virt_to_page((void *)addr);
+ if (put_page_testzero(page)) {
+ int pages = (1 << order);
+ homecache_change_page_home(page, order, initial_page_home());
+ while (pages--)
+ __free_page(page++);
+ }
+}
diff --git a/arch/tile/mm/hugetlbpage.c b/arch/tile/mm/hugetlbpage.c
new file mode 100644
index 000000000000..c38570f8f0d0
--- /dev/null
+++ b/arch/tile/mm/hugetlbpage.c
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * TILE Huge TLB Page Support for Kernel.
+ * Taken from i386 hugetlb implementation:
+ * Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
+ */
+
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/pagemap.h>
+#include <linux/smp_lock.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/sysctl.h>
+#include <linux/mman.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+ unsigned long addr, unsigned long sz)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pte_t *pte = NULL;
+
+ /* We do not yet support multiple huge page sizes. */
+ BUG_ON(sz != PMD_SIZE);
+
+ pgd = pgd_offset(mm, addr);
+ pud = pud_alloc(mm, pgd, addr);
+ if (pud)
+ pte = (pte_t *) pmd_alloc(mm, pud, addr);
+ BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
+
+ return pte;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd = NULL;
+
+ pgd = pgd_offset(mm, addr);
+ if (pgd_present(*pgd)) {
+ pud = pud_offset(pgd, addr);
+ if (pud_present(*pud))
+ pmd = pmd_offset(pud, addr);
+ }
+ return (pte_t *) pmd;
+}
+
+#ifdef HUGETLB_TEST
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+ int write)
+{
+ unsigned long start = address;
+ int length = 1;
+ int nr;
+ struct page *page;
+ struct vm_area_struct *vma;
+
+ vma = find_vma(mm, addr);
+ if (!vma || !is_vm_hugetlb_page(vma))
+ return ERR_PTR(-EINVAL);
+
+ pte = huge_pte_offset(mm, address);
+
+ /* hugetlb should be locked, and hence, prefaulted */
+ WARN_ON(!pte || pte_none(*pte));
+
+ page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
+
+ WARN_ON(!PageHead(page));
+
+ return page;
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return 0;
+}
+
+int pud_huge(pud_t pud)
+{
+ return 0;
+}
+
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ return NULL;
+}
+
+#else
+
+struct page *follow_huge_addr(struct mm_struct *mm, unsigned long address,
+ int write)
+{
+ return ERR_PTR(-EINVAL);
+}
+
+int pmd_huge(pmd_t pmd)
+{
+ return !!(pmd_val(pmd) & _PAGE_HUGE_PAGE);
+}
+
+int pud_huge(pud_t pud)
+{
+ return !!(pud_val(pud) & _PAGE_HUGE_PAGE);
+}
+
+struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
+ pmd_t *pmd, int write)
+{
+ struct page *page;
+
+ page = pte_page(*(pte_t *)pmd);
+ if (page)
+ page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+ return page;
+}
+
+struct page *follow_huge_pud(struct mm_struct *mm, unsigned long address,
+ pud_t *pud, int write)
+{
+ struct page *page;
+
+ page = pte_page(*(pte_t *)pud);
+ if (page)
+ page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
+ return page;
+}
+
+int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
+{
+ return 0;
+}
+
+#endif
+
+#ifdef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
+ unsigned long addr, unsigned long len,
+ unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ unsigned long start_addr;
+
+ if (len > mm->cached_hole_size) {
+ start_addr = mm->free_area_cache;
+ } else {
+ start_addr = TASK_UNMAPPED_BASE;
+ mm->cached_hole_size = 0;
+ }
+
+full_search:
+ addr = ALIGN(start_addr, huge_page_size(h));
+
+ for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
+ /* At this point: (!vma || addr < vma->vm_end). */
+ if (TASK_SIZE - len < addr) {
+ /*
+ * Start a new search - just in case we missed
+ * some holes.
+ */
+ if (start_addr != TASK_UNMAPPED_BASE) {
+ start_addr = TASK_UNMAPPED_BASE;
+ mm->cached_hole_size = 0;
+ goto full_search;
+ }
+ return -ENOMEM;
+ }
+ if (!vma || addr + len <= vma->vm_start) {
+ mm->free_area_cache = addr + len;
+ return addr;
+ }
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
+ addr = ALIGN(vma->vm_end, huge_page_size(h));
+ }
+}
+
+static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
+ unsigned long addr0, unsigned long len,
+ unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma, *prev_vma;
+ unsigned long base = mm->mmap_base, addr = addr0;
+ unsigned long largest_hole = mm->cached_hole_size;
+ int first_time = 1;
+
+ /* don't allow allocations above current base */
+ if (mm->free_area_cache > base)
+ mm->free_area_cache = base;
+
+ if (len <= largest_hole) {
+ largest_hole = 0;
+ mm->free_area_cache = base;
+ }
+try_again:
+ /* make sure it can fit in the remaining address space */
+ if (mm->free_area_cache < len)
+ goto fail;
+
+ /* either no address requested or cant fit in requested address hole */
+ addr = (mm->free_area_cache - len) & huge_page_mask(h);
+ do {
+ /*
+ * Lookup failure means no vma is above this address,
+ * i.e. return with success:
+ */
+ vma = find_vma_prev(mm, addr, &prev_vma);
+ if (!vma) {
+ return addr;
+ break;
+ }
+
+ /*
+ * new region fits between prev_vma->vm_end and
+ * vma->vm_start, use it:
+ */
+ if (addr + len <= vma->vm_start &&
+ (!prev_vma || (addr >= prev_vma->vm_end))) {
+ /* remember the address as a hint for next time */
+ mm->cached_hole_size = largest_hole;
+ mm->free_area_cache = addr;
+ return addr;
+ } else {
+ /* pull free_area_cache down to the first hole */
+ if (mm->free_area_cache == vma->vm_end) {
+ mm->free_area_cache = vma->vm_start;
+ mm->cached_hole_size = largest_hole;
+ }
+ }
+
+ /* remember the largest hole we saw so far */
+ if (addr + largest_hole < vma->vm_start)
+ largest_hole = vma->vm_start - addr;
+
+ /* try just below the current vma->vm_start */
+ addr = (vma->vm_start - len) & huge_page_mask(h);
+
+ } while (len <= vma->vm_start);
+
+fail:
+ /*
+ * if hint left us with no space for the requested
+ * mapping then try again:
+ */
+ if (first_time) {
+ mm->free_area_cache = base;
+ largest_hole = 0;
+ first_time = 0;
+ goto try_again;
+ }
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
+ mm->cached_hole_size = ~0UL;
+ addr = hugetlb_get_unmapped_area_bottomup(file, addr0,
+ len, pgoff, flags);
+
+ /*
+ * Restore the topdown base:
+ */
+ mm->free_area_cache = base;
+ mm->cached_hole_size = ~0UL;
+
+ return addr;
+}
+
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+
+ if (len & ~huge_page_mask(h))
+ return -EINVAL;
+ if (len > TASK_SIZE)
+ return -ENOMEM;
+
+ if (flags & MAP_FIXED) {
+ if (prepare_hugepage_range(file, addr, len))
+ return -EINVAL;
+ return addr;
+ }
+
+ if (addr) {
+ addr = ALIGN(addr, huge_page_size(h));
+ vma = find_vma(mm, addr);
+ if (TASK_SIZE - len >= addr &&
+ (!vma || addr + len <= vma->vm_start))
+ return addr;
+ }
+ if (current->mm->get_unmapped_area == arch_get_unmapped_area)
+ return hugetlb_get_unmapped_area_bottomup(file, addr, len,
+ pgoff, flags);
+ else
+ return hugetlb_get_unmapped_area_topdown(file, addr, len,
+ pgoff, flags);
+}
+
+static __init int setup_hugepagesz(char *opt)
+{
+ unsigned long ps = memparse(opt, &opt);
+ if (ps == PMD_SIZE) {
+ hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+ } else if (ps == PUD_SIZE) {
+ hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+ } else {
+ printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+ ps >> 20);
+ return 0;
+ }
+ return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+
+#endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c
new file mode 100644
index 000000000000..125ac53b60fc
--- /dev/null
+++ b/arch/tile/mm/init.c
@@ -0,0 +1,1082 @@
+/*
+ * Copyright (C) 1995 Linus Torvalds
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/highmem.h>
+#include <linux/pagemap.h>
+#include <linux/poison.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/efi.h>
+#include <linux/memory_hotplug.h>
+#include <linux/uaccess.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/dma.h>
+#include <asm/fixmap.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/homecache.h>
+#include <hv/hypervisor.h>
+#include <arch/chip.h>
+
+#include "migrate.h"
+
+/*
+ * We could set FORCE_MAX_ZONEORDER to "(HPAGE_SHIFT - PAGE_SHIFT + 1)"
+ * in the Tile Kconfig, but this generates configure warnings.
+ * Do it here and force people to get it right to compile this file.
+ * The problem is that with 4KB small pages and 16MB huge pages,
+ * the default value doesn't allow us to group enough small pages
+ * together to make up a huge page.
+ */
+#if CONFIG_FORCE_MAX_ZONEORDER < HPAGE_SHIFT - PAGE_SHIFT + 1
+# error "Change FORCE_MAX_ZONEORDER in arch/tile/Kconfig to match page size"
+#endif
+
+#define clear_pgd(pmdptr) (*(pmdptr) = hv_pte(0))
+
+unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE;
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/* Create an L2 page table */
+static pte_t * __init alloc_pte(void)
+{
+ return __alloc_bootmem(L2_KERNEL_PGTABLE_SIZE, HV_PAGE_TABLE_ALIGN, 0);
+}
+
+/*
+ * L2 page tables per controller. We allocate these all at once from
+ * the bootmem allocator and store them here. This saves on kernel L2
+ * page table memory, compared to allocating a full 64K page per L2
+ * page table, and also means that in cases where we use huge pages,
+ * we are guaranteed to later be able to shatter those huge pages and
+ * switch to using these page tables instead, without requiring
+ * further allocation. Each l2_ptes[] entry points to the first page
+ * table for the first hugepage-size piece of memory on the
+ * controller; other page tables are just indexed directly, i.e. the
+ * L2 page tables are contiguous in memory for each controller.
+ */
+static pte_t *l2_ptes[MAX_NUMNODES];
+static int num_l2_ptes[MAX_NUMNODES];
+
+static void init_prealloc_ptes(int node, int pages)
+{
+ BUG_ON(pages & (HV_L2_ENTRIES-1));
+ if (pages) {
+ num_l2_ptes[node] = pages;
+ l2_ptes[node] = __alloc_bootmem(pages * sizeof(pte_t),
+ HV_PAGE_TABLE_ALIGN, 0);
+ }
+}
+
+pte_t *get_prealloc_pte(unsigned long pfn)
+{
+ int node = pfn_to_nid(pfn);
+ pfn &= ~(-1UL << (NR_PA_HIGHBIT_SHIFT - PAGE_SHIFT));
+ BUG_ON(node >= MAX_NUMNODES);
+ BUG_ON(pfn >= num_l2_ptes[node]);
+ return &l2_ptes[node][pfn];
+}
+
+/*
+ * What caching do we expect pages from the heap to have when
+ * they are allocated during bootup? (Once we've installed the
+ * "real" swapper_pg_dir.)
+ */
+static int initial_heap_home(void)
+{
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (hash_default)
+ return PAGE_HOME_HASH;
+#endif
+ return smp_processor_id();
+}
+
+/*
+ * Place a pointer to an L2 page table in a middle page
+ * directory entry.
+ */
+static void __init assign_pte(pmd_t *pmd, pte_t *page_table)
+{
+ phys_addr_t pa = __pa(page_table);
+ unsigned long l2_ptfn = pa >> HV_LOG2_PAGE_TABLE_ALIGN;
+ pte_t pteval = hv_pte_set_ptfn(__pgprot(_PAGE_TABLE), l2_ptfn);
+ BUG_ON((pa & (HV_PAGE_TABLE_ALIGN-1)) != 0);
+ pteval = pte_set_home(pteval, initial_heap_home());
+ *(pte_t *)pmd = pteval;
+ if (page_table != (pte_t *)pmd_page_vaddr(*pmd))
+ BUG();
+}
+
+#ifdef __tilegx__
+
+#if HV_L1_SIZE != HV_L2_SIZE
+# error Rework assumption that L1 and L2 page tables are same size.
+#endif
+
+/* Since pmd_t arrays and pte_t arrays are the same size, just use casts. */
+static inline pmd_t *alloc_pmd(void)
+{
+ return (pmd_t *)alloc_pte();
+}
+
+static inline void assign_pmd(pud_t *pud, pmd_t *pmd)
+{
+ assign_pte((pmd_t *)pud, (pte_t *)pmd);
+}
+
+#endif /* __tilegx__ */
+
+/* Replace the given pmd with a full PTE table. */
+void __init shatter_pmd(pmd_t *pmd)
+{
+ pte_t *pte = get_prealloc_pte(pte_pfn(*(pte_t *)pmd));
+ assign_pte(pmd, pte);
+}
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * This function initializes a certain range of kernel virtual memory
+ * with new bootmem page tables, everywhere page tables are missing in
+ * the given range.
+ */
+
+/*
+ * NOTE: The pagetables are allocated contiguous on the physical space
+ * so we can cache the place of the first one and move around without
+ * checking the pgd every time.
+ */
+static void __init page_table_range_init(unsigned long start,
+ unsigned long end, pgd_t *pgd_base)
+{
+ pgd_t *pgd;
+ int pgd_idx;
+ unsigned long vaddr;
+
+ vaddr = start;
+ pgd_idx = pgd_index(vaddr);
+ pgd = pgd_base + pgd_idx;
+
+ for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
+ pmd_t *pmd = pmd_offset(pud_offset(pgd, vaddr), vaddr);
+ if (pmd_none(*pmd))
+ assign_pte(pmd, alloc_pte());
+ vaddr += PMD_SIZE;
+ }
+}
+#endif /* CONFIG_HIGHMEM */
+
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+
+static int __initdata ktext_hash = 1; /* .text pages */
+static int __initdata kdata_hash = 1; /* .data and .bss pages */
+int __write_once hash_default = 1; /* kernel allocator pages */
+EXPORT_SYMBOL(hash_default);
+int __write_once kstack_hash = 1; /* if no homecaching, use h4h */
+#endif /* CHIP_HAS_CBOX_HOME_MAP */
+
+/*
+ * CPUs to use to for striping the pages of kernel data. If hash-for-home
+ * is available, this is only relevant if kcache_hash sets up the
+ * .data and .bss to be page-homed, and we don't want the default mode
+ * of using the full set of kernel cpus for the striping.
+ */
+static __initdata struct cpumask kdata_mask;
+static __initdata int kdata_arg_seen;
+
+int __write_once kdata_huge; /* if no homecaching, small pages */
+
+
+/* Combine a generic pgprot_t with cache home to get a cache-aware pgprot. */
+static pgprot_t __init construct_pgprot(pgprot_t prot, int home)
+{
+ prot = pte_set_home(prot, home);
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (home == PAGE_HOME_IMMUTABLE) {
+ if (ktext_hash)
+ prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_HASH_L3);
+ else
+ prot = hv_pte_set_mode(prot, HV_PTE_MODE_CACHE_NO_L3);
+ }
+#endif
+ return prot;
+}
+
+/*
+ * For a given kernel data VA, how should it be cached?
+ * We return the complete pgprot_t with caching bits set.
+ */
+static pgprot_t __init init_pgprot(ulong address)
+{
+ int cpu;
+ unsigned long page;
+ enum { CODE_DELTA = MEM_SV_INTRPT - PAGE_OFFSET };
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ /* For kdata=huge, everything is just hash-for-home. */
+ if (kdata_huge)
+ return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+
+ /* We map the aliased pages of permanent text inaccessible. */
+ if (address < (ulong) _sinittext - CODE_DELTA)
+ return PAGE_NONE;
+
+ /*
+ * We map read-only data non-coherent for performance. We could
+ * use neighborhood caching on TILE64, but it's not clear it's a win.
+ */
+ if ((address >= (ulong) __start_rodata &&
+ address < (ulong) __end_rodata) ||
+ address == (ulong) empty_zero_page) {
+ return construct_pgprot(PAGE_KERNEL_RO, PAGE_HOME_IMMUTABLE);
+ }
+
+ /* As a performance optimization, keep the boot init stack here. */
+ if (address >= (ulong)&init_thread_union &&
+ address < (ulong)&init_thread_union + THREAD_SIZE)
+ return construct_pgprot(PAGE_KERNEL, smp_processor_id());
+
+#ifndef __tilegx__
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ /* Force the atomic_locks[] array page to be hash-for-home. */
+ if (address == (ulong) atomic_locks)
+ return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+#endif
+
+ /*
+ * Everything else that isn't data or bss is heap, so mark it
+ * with the initial heap home (hash-for-home, or this cpu). This
+ * includes any addresses after the loaded image; any address before
+ * _einittext (since we already captured the case of text before
+ * _sinittext); and any init-data pages.
+ *
+ * All the LOWMEM pages that we mark this way will get their
+ * struct page homecache properly marked later, in set_page_homes().
+ * The HIGHMEM pages we leave with a default zero for their
+ * homes, but with a zero free_time we don't have to actually
+ * do a flush action the first time we use them, either.
+ */
+ if (address >= (ulong) _end || address < (ulong) _sdata ||
+ (address >= (ulong) _sinitdata &&
+ address < (ulong) _einitdata))
+ return construct_pgprot(PAGE_KERNEL, initial_heap_home());
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ /* Use hash-for-home if requested for data/bss. */
+ if (kdata_hash)
+ return construct_pgprot(PAGE_KERNEL, PAGE_HOME_HASH);
+#endif
+
+ /*
+ * Otherwise we just hand out consecutive cpus. To avoid
+ * requiring this function to hold state, we just walk forward from
+ * _sdata by PAGE_SIZE, skipping the readonly and init data, to reach
+ * the requested address, while walking cpu home around kdata_mask.
+ * This is typically no more than a dozen or so iterations.
+ */
+ BUG_ON(_einitdata != __bss_start);
+ for (page = (ulong)_sdata, cpu = NR_CPUS; ; ) {
+ cpu = cpumask_next(cpu, &kdata_mask);
+ if (cpu == NR_CPUS)
+ cpu = cpumask_first(&kdata_mask);
+ if (page >= address)
+ break;
+ page += PAGE_SIZE;
+ if (page == (ulong)__start_rodata)
+ page = (ulong)__end_rodata;
+ if (page == (ulong)&init_thread_union)
+ page += THREAD_SIZE;
+ if (page == (ulong)_sinitdata)
+ page = (ulong)_einitdata;
+ if (page == (ulong)empty_zero_page)
+ page += PAGE_SIZE;
+#ifndef __tilegx__
+#if !ATOMIC_LOCKS_FOUND_VIA_TABLE()
+ if (page == (ulong)atomic_locks)
+ page += PAGE_SIZE;
+#endif
+#endif
+
+ }
+ return construct_pgprot(PAGE_KERNEL, cpu);
+}
+
+/*
+ * This function sets up how we cache the kernel text. If we have
+ * hash-for-home support, normally that is used instead (see the
+ * kcache_hash boot flag for more information). But if we end up
+ * using a page-based caching technique, this option sets up the
+ * details of that. In addition, the "ktext=nocache" option may
+ * always be used to disable local caching of text pages, if desired.
+ */
+
+static int __initdata ktext_arg_seen;
+static int __initdata ktext_small;
+static int __initdata ktext_local;
+static int __initdata ktext_all;
+static int __initdata ktext_nondataplane;
+static int __initdata ktext_nocache;
+static struct cpumask __initdata ktext_mask;
+
+static int __init setup_ktext(char *str)
+{
+ if (str == NULL)
+ return -EINVAL;
+
+ /* If you have a leading "nocache", turn off ktext caching */
+ if (strncmp(str, "nocache", 7) == 0) {
+ ktext_nocache = 1;
+ printk("ktext: disabling local caching of kernel text\n");
+ str += 7;
+ if (*str == ',')
+ ++str;
+ if (*str == '\0')
+ return 0;
+ }
+
+ ktext_arg_seen = 1;
+
+ /* Default setting on Tile64: use a huge page */
+ if (strcmp(str, "huge") == 0)
+ printk("ktext: using one huge locally cached page\n");
+
+ /* Pay TLB cost but get no cache benefit: cache small pages locally */
+ else if (strcmp(str, "local") == 0) {
+ ktext_small = 1;
+ ktext_local = 1;
+ printk("ktext: using small pages with local caching\n");
+ }
+
+ /* Neighborhood cache ktext pages on all cpus. */
+ else if (strcmp(str, "all") == 0) {
+ ktext_small = 1;
+ ktext_all = 1;
+ printk("ktext: using maximal caching neighborhood\n");
+ }
+
+
+ /* Neighborhood ktext pages on specified mask */
+ else if (cpulist_parse(str, &ktext_mask) == 0) {
+ char buf[NR_CPUS * 5];
+ cpulist_scnprintf(buf, sizeof(buf), &ktext_mask);
+ if (cpumask_weight(&ktext_mask) > 1) {
+ ktext_small = 1;
+ printk("ktext: using caching neighborhood %s "
+ "with small pages\n", buf);
+ } else {
+ printk("ktext: caching on cpu %s with one huge page\n",
+ buf);
+ }
+ }
+
+ else if (*str)
+ return -EINVAL;
+
+ return 0;
+}
+
+early_param("ktext", setup_ktext);
+
+
+static inline pgprot_t ktext_set_nocache(pgprot_t prot)
+{
+ if (!ktext_nocache)
+ prot = hv_pte_set_nc(prot);
+#if CHIP_HAS_NC_AND_NOALLOC_BITS()
+ else
+ prot = hv_pte_set_no_alloc_l2(prot);
+#endif
+ return prot;
+}
+
+#ifndef __tilegx__
+static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va)
+{
+ return pmd_offset(pud_offset(&pgtables[pgd_index(va)], va), va);
+}
+#else
+static pmd_t *__init get_pmd(pgd_t pgtables[], unsigned long va)
+{
+ pud_t *pud = pud_offset(&pgtables[pgd_index(va)], va);
+ if (pud_none(*pud))
+ assign_pmd(pud, alloc_pmd());
+ return pmd_offset(pud, va);
+}
+#endif
+
+/* Temporary page table we use for staging. */
+static pgd_t pgtables[PTRS_PER_PGD]
+ __attribute__((section(".init.page")));
+
+/*
+ * This maps the physical memory to kernel virtual address space, a total
+ * of max_low_pfn pages, by creating page tables starting from address
+ * PAGE_OFFSET.
+ *
+ * This routine transitions us from using a set of compiled-in large
+ * pages to using some more precise caching, including removing access
+ * to code pages mapped at PAGE_OFFSET (executed only at MEM_SV_START)
+ * marking read-only data as locally cacheable, striping the remaining
+ * .data and .bss across all the available tiles, and removing access
+ * to pages above the top of RAM (thus ensuring a page fault from a bad
+ * virtual address rather than a hypervisor shoot down for accessing
+ * memory outside the assigned limits).
+ */
+static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
+{
+ unsigned long address, pfn;
+ pmd_t *pmd;
+ pte_t *pte;
+ int pte_ofs;
+ const struct cpumask *my_cpu_mask = cpumask_of(smp_processor_id());
+ struct cpumask kstripe_mask;
+ int rc, i;
+
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (ktext_arg_seen && ktext_hash) {
+ printk("warning: \"ktext\" boot argument ignored"
+ " if \"kcache_hash\" sets up text hash-for-home\n");
+ ktext_small = 0;
+ }
+
+ if (kdata_arg_seen && kdata_hash) {
+ printk("warning: \"kdata\" boot argument ignored"
+ " if \"kcache_hash\" sets up data hash-for-home\n");
+ }
+
+ if (kdata_huge && !hash_default) {
+ printk("warning: disabling \"kdata=huge\"; requires"
+ " kcache_hash=all or =allbutstack\n");
+ kdata_huge = 0;
+ }
+#endif
+
+ /*
+ * Set up a mask for cpus to use for kernel striping.
+ * This is normally all cpus, but minus dataplane cpus if any.
+ * If the dataplane covers the whole chip, we stripe over
+ * the whole chip too.
+ */
+ cpumask_copy(&kstripe_mask, cpu_possible_mask);
+ if (!kdata_arg_seen)
+ kdata_mask = kstripe_mask;
+
+ /* Allocate and fill in L2 page tables */
+ for (i = 0; i < MAX_NUMNODES; ++i) {
+#ifdef CONFIG_HIGHMEM
+ unsigned long end_pfn = node_lowmem_end_pfn[i];
+#else
+ unsigned long end_pfn = node_end_pfn[i];
+#endif
+ unsigned long end_huge_pfn = 0;
+
+ /* Pre-shatter the last huge page to allow per-cpu pages. */
+ if (kdata_huge)
+ end_huge_pfn = end_pfn - (HPAGE_SIZE >> PAGE_SHIFT);
+
+ pfn = node_start_pfn[i];
+
+ /* Allocate enough memory to hold L2 page tables for node. */
+ init_prealloc_ptes(i, end_pfn - pfn);
+
+ address = (unsigned long) pfn_to_kaddr(pfn);
+ while (pfn < end_pfn) {
+ BUG_ON(address & (HPAGE_SIZE-1));
+ pmd = get_pmd(pgtables, address);
+ pte = get_prealloc_pte(pfn);
+ if (pfn < end_huge_pfn) {
+ pgprot_t prot = init_pgprot(address);
+ *(pte_t *)pmd = pte_mkhuge(pfn_pte(pfn, prot));
+ for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE;
+ pfn++, pte_ofs++, address += PAGE_SIZE)
+ pte[pte_ofs] = pfn_pte(pfn, prot);
+ } else {
+ if (kdata_huge)
+ printk(KERN_DEBUG "pre-shattered huge"
+ " page at %#lx\n", address);
+ for (pte_ofs = 0; pte_ofs < PTRS_PER_PTE;
+ pfn++, pte_ofs++, address += PAGE_SIZE) {
+ pgprot_t prot = init_pgprot(address);
+ pte[pte_ofs] = pfn_pte(pfn, prot);
+ }
+ assign_pte(pmd, pte);
+ }
+ }
+ }
+
+ /*
+ * Set or check ktext_map now that we have cpu_possible_mask
+ * and kstripe_mask to work with.
+ */
+ if (ktext_all)
+ cpumask_copy(&ktext_mask, cpu_possible_mask);
+ else if (ktext_nondataplane)
+ ktext_mask = kstripe_mask;
+ else if (!cpumask_empty(&ktext_mask)) {
+ /* Sanity-check any mask that was requested */
+ struct cpumask bad;
+ cpumask_andnot(&bad, &ktext_mask, cpu_possible_mask);
+ cpumask_and(&ktext_mask, &ktext_mask, cpu_possible_mask);
+ if (!cpumask_empty(&bad)) {
+ char buf[NR_CPUS * 5];
+ cpulist_scnprintf(buf, sizeof(buf), &bad);
+ printk("ktext: not using unavailable cpus %s\n", buf);
+ }
+ if (cpumask_empty(&ktext_mask)) {
+ printk("ktext: no valid cpus; caching on %d.\n",
+ smp_processor_id());
+ cpumask_copy(&ktext_mask,
+ cpumask_of(smp_processor_id()));
+ }
+ }
+
+ address = MEM_SV_INTRPT;
+ pmd = get_pmd(pgtables, address);
+ if (ktext_small) {
+ /* Allocate an L2 PTE for the kernel text */
+ int cpu = 0;
+ pgprot_t prot = construct_pgprot(PAGE_KERNEL_EXEC,
+ PAGE_HOME_IMMUTABLE);
+
+ if (ktext_local) {
+ if (ktext_nocache)
+ prot = hv_pte_set_mode(prot,
+ HV_PTE_MODE_UNCACHED);
+ else
+ prot = hv_pte_set_mode(prot,
+ HV_PTE_MODE_CACHE_NO_L3);
+ } else {
+ prot = hv_pte_set_mode(prot,
+ HV_PTE_MODE_CACHE_TILE_L3);
+ cpu = cpumask_first(&ktext_mask);
+
+ prot = ktext_set_nocache(prot);
+ }
+
+ BUG_ON(address != (unsigned long)_stext);
+ pfn = 0; /* code starts at PA 0 */
+ pte = alloc_pte();
+ for (pte_ofs = 0; address < (unsigned long)_einittext;
+ pfn++, pte_ofs++, address += PAGE_SIZE) {
+ if (!ktext_local) {
+ prot = set_remote_cache_cpu(prot, cpu);
+ cpu = cpumask_next(cpu, &ktext_mask);
+ if (cpu == NR_CPUS)
+ cpu = cpumask_first(&ktext_mask);
+ }
+ pte[pte_ofs] = pfn_pte(pfn, prot);
+ }
+ assign_pte(pmd, pte);
+ } else {
+ pte_t pteval = pfn_pte(0, PAGE_KERNEL_EXEC);
+ pteval = pte_mkhuge(pteval);
+#if CHIP_HAS_CBOX_HOME_MAP()
+ if (ktext_hash) {
+ pteval = hv_pte_set_mode(pteval,
+ HV_PTE_MODE_CACHE_HASH_L3);
+ pteval = ktext_set_nocache(pteval);
+ } else
+#endif /* CHIP_HAS_CBOX_HOME_MAP() */
+ if (cpumask_weight(&ktext_mask) == 1) {
+ pteval = set_remote_cache_cpu(pteval,
+ cpumask_first(&ktext_mask));
+ pteval = hv_pte_set_mode(pteval,
+ HV_PTE_MODE_CACHE_TILE_L3);
+ pteval = ktext_set_nocache(pteval);
+ } else if (ktext_nocache)
+ pteval = hv_pte_set_mode(pteval,
+ HV_PTE_MODE_UNCACHED);
+ else
+ pteval = hv_pte_set_mode(pteval,
+ HV_PTE_MODE_CACHE_NO_L3);
+ *(pte_t *)pmd = pteval;
+ }
+
+ /* Set swapper_pgprot here so it is flushed to memory right away. */
+ swapper_pgprot = init_pgprot((unsigned long)swapper_pg_dir);
+
+ /*
+ * Since we may be changing the caching of the stack and page
+ * table itself, we invoke an assembly helper to do the
+ * following steps:
+ *
+ * - flush the cache so we start with an empty slate
+ * - install pgtables[] as the real page table
+ * - flush the TLB so the new page table takes effect
+ */
+ rc = flush_and_install_context(__pa(pgtables),
+ init_pgprot((unsigned long)pgtables),
+ __get_cpu_var(current_asid),
+ cpumask_bits(my_cpu_mask));
+ BUG_ON(rc != 0);
+
+ /* Copy the page table back to the normal swapper_pg_dir. */
+ memcpy(pgd_base, pgtables, sizeof(pgtables));
+ __install_page_table(pgd_base, __get_cpu_var(current_asid),
+ swapper_pgprot);
+}
+
+/*
+ * devmem_is_allowed() checks to see if /dev/mem access to a certain address
+ * is valid. The argument is a physical page number.
+ *
+ * On Tile, the only valid things for which we can just hand out unchecked
+ * PTEs are the kernel code and data. Anything else might change its
+ * homing with time, and we wouldn't know to adjust the /dev/mem PTEs.
+ * Note that init_thread_union is released to heap soon after boot,
+ * so we include it in the init data.
+ *
+ * For TILE-Gx, we might want to consider allowing access to PA
+ * regions corresponding to PCI space, etc.
+ */
+int devmem_is_allowed(unsigned long pagenr)
+{
+ return pagenr < kaddr_to_pfn(_end) &&
+ !(pagenr >= kaddr_to_pfn(&init_thread_union) ||
+ pagenr < kaddr_to_pfn(_einitdata)) &&
+ !(pagenr >= kaddr_to_pfn(_sinittext) ||
+ pagenr <= kaddr_to_pfn(_einittext-1));
+}
+
+#ifdef CONFIG_HIGHMEM
+static void __init permanent_kmaps_init(pgd_t *pgd_base)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+ unsigned long vaddr;
+
+ vaddr = PKMAP_BASE;
+ page_table_range_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
+
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ pte = pte_offset_kernel(pmd, vaddr);
+ pkmap_page_table = pte;
+}
+#endif /* CONFIG_HIGHMEM */
+
+
+static void __init init_free_pfn_range(unsigned long start, unsigned long end)
+{
+ unsigned long pfn;
+ struct page *page = pfn_to_page(start);
+
+ for (pfn = start; pfn < end; ) {
+ /* Optimize by freeing pages in large batches */
+ int order = __ffs(pfn);
+ int count, i;
+ struct page *p;
+
+ if (order >= MAX_ORDER)
+ order = MAX_ORDER-1;
+ count = 1 << order;
+ while (pfn + count > end) {
+ count >>= 1;
+ --order;
+ }
+ for (p = page, i = 0; i < count; ++i, ++p) {
+ __ClearPageReserved(p);
+ /*
+ * Hacky direct set to avoid unnecessary
+ * lock take/release for EVERY page here.
+ */
+ p->_count.counter = 0;
+ p->_mapcount.counter = -1;
+ }
+ init_page_count(page);
+ __free_pages(page, order);
+ totalram_pages += count;
+
+ page += count;
+ pfn += count;
+ }
+}
+
+static void __init set_non_bootmem_pages_init(void)
+{
+ struct zone *z;
+ for_each_zone(z) {
+ unsigned long start, end;
+ int nid = z->zone_pgdat->node_id;
+
+ start = z->zone_start_pfn;
+ if (start == 0)
+ continue; /* bootmem */
+ end = start + z->spanned_pages;
+ if (zone_idx(z) == ZONE_NORMAL) {
+ BUG_ON(start != node_start_pfn[nid]);
+ start = node_free_pfn[nid];
+ }
+#ifdef CONFIG_HIGHMEM
+ if (zone_idx(z) == ZONE_HIGHMEM)
+ totalhigh_pages += z->spanned_pages;
+#endif
+ if (kdata_huge) {
+ unsigned long percpu_pfn = node_percpu_pfn[nid];
+ if (start < percpu_pfn && end > percpu_pfn)
+ end = percpu_pfn;
+ }
+#ifdef CONFIG_PCI
+ if (start <= pci_reserve_start_pfn &&
+ end > pci_reserve_start_pfn) {
+ if (end > pci_reserve_end_pfn)
+ init_free_pfn_range(pci_reserve_end_pfn, end);
+ end = pci_reserve_start_pfn;
+ }
+#endif
+ init_free_pfn_range(start, end);
+ }
+}
+
+/*
+ * paging_init() sets up the page tables - note that all of lowmem is
+ * already mapped by head.S.
+ */
+void __init paging_init(void)
+{
+#ifdef CONFIG_HIGHMEM
+ unsigned long vaddr, end;
+#endif
+#ifdef __tilegx__
+ pud_t *pud;
+#endif
+ pgd_t *pgd_base = swapper_pg_dir;
+
+ kernel_physical_mapping_init(pgd_base);
+
+#ifdef CONFIG_HIGHMEM
+ /*
+ * Fixed mappings, only the page table structure has to be
+ * created - mappings will be set by set_fixmap():
+ */
+ vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
+ end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
+ page_table_range_init(vaddr, end, pgd_base);
+ permanent_kmaps_init(pgd_base);
+#endif
+
+#ifdef __tilegx__
+ /*
+ * Since GX allocates just one pmd_t array worth of vmalloc space,
+ * we go ahead and allocate it statically here, then share it
+ * globally. As a result we don't have to worry about any task
+ * changing init_mm once we get up and running, and there's no
+ * need for e.g. vmalloc_sync_all().
+ */
+ BUILD_BUG_ON(pgd_index(VMALLOC_START) != pgd_index(VMALLOC_END));
+ pud = pud_offset(pgd_base + pgd_index(VMALLOC_START), VMALLOC_START);
+ assign_pmd(pud, alloc_pmd());
+#endif
+}
+
+
+/*
+ * Walk the kernel page tables and derive the page_home() from
+ * the PTEs, so that set_pte() can properly validate the caching
+ * of all PTEs it sees.
+ */
+void __init set_page_homes(void)
+{
+}
+
+static void __init set_max_mapnr_init(void)
+{
+#ifdef CONFIG_FLATMEM
+ max_mapnr = max_low_pfn;
+#endif
+}
+
+void __init mem_init(void)
+{
+ int codesize, datasize, initsize;
+ int i;
+#ifndef __tilegx__
+ void *last;
+#endif
+
+#ifdef CONFIG_FLATMEM
+ if (!mem_map)
+ BUG();
+#endif
+
+#ifdef CONFIG_HIGHMEM
+ /* check that fixmap and pkmap do not overlap */
+ if (PKMAP_ADDR(LAST_PKMAP-1) >= FIXADDR_START) {
+ printk(KERN_ERR "fixmap and kmap areas overlap"
+ " - this will crash\n");
+ printk(KERN_ERR "pkstart: %lxh pkend: %lxh fixstart %lxh\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP-1),
+ FIXADDR_START);
+ BUG();
+ }
+#endif
+
+ set_max_mapnr_init();
+
+ /* this will put all bootmem onto the freelists */
+ totalram_pages += free_all_bootmem();
+
+ /* count all remaining LOWMEM and give all HIGHMEM to page allocator */
+ set_non_bootmem_pages_init();
+
+ codesize = (unsigned long)&_etext - (unsigned long)&_text;
+ datasize = (unsigned long)&_end - (unsigned long)&_sdata;
+ initsize = (unsigned long)&_einittext - (unsigned long)&_sinittext;
+ initsize += (unsigned long)&_einitdata - (unsigned long)&_sinitdata;
+
+ printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
+ (unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
+ num_physpages << (PAGE_SHIFT-10),
+ codesize >> 10,
+ datasize >> 10,
+ initsize >> 10,
+ (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10))
+ );
+
+ /*
+ * In debug mode, dump some interesting memory mappings.
+ */
+#ifdef CONFIG_HIGHMEM
+ printk(KERN_DEBUG " KMAP %#lx - %#lx\n",
+ FIXADDR_START, FIXADDR_TOP + PAGE_SIZE - 1);
+ printk(KERN_DEBUG " PKMAP %#lx - %#lx\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP) - 1);
+#endif
+#ifdef CONFIG_HUGEVMAP
+ printk(KERN_DEBUG " HUGEMAP %#lx - %#lx\n",
+ HUGE_VMAP_BASE, HUGE_VMAP_END - 1);
+#endif
+ printk(KERN_DEBUG " VMALLOC %#lx - %#lx\n",
+ _VMALLOC_START, _VMALLOC_END - 1);
+#ifdef __tilegx__
+ for (i = MAX_NUMNODES-1; i >= 0; --i) {
+ struct pglist_data *node = &node_data[i];
+ if (node->node_present_pages) {
+ unsigned long start = (unsigned long)
+ pfn_to_kaddr(node->node_start_pfn);
+ unsigned long end = start +
+ (node->node_present_pages << PAGE_SHIFT);
+ printk(KERN_DEBUG " MEM%d %#lx - %#lx\n",
+ i, start, end - 1);
+ }
+ }
+#else
+ last = high_memory;
+ for (i = MAX_NUMNODES-1; i >= 0; --i) {
+ if ((unsigned long)vbase_map[i] != -1UL) {
+ printk(KERN_DEBUG " LOWMEM%d %#lx - %#lx\n",
+ i, (unsigned long) (vbase_map[i]),
+ (unsigned long) (last-1));
+ last = vbase_map[i];
+ }
+ }
+#endif
+
+#ifndef __tilegx__
+ /*
+ * Convert from using one lock for all atomic operations to
+ * one per cpu.
+ */
+ __init_atomic_per_cpu();
+#endif
+}
+
+/*
+ * this is for the non-NUMA, single node SMP system case.
+ * Specifically, in the case of x86, we will always add
+ * memory to the highmem for now.
+ */
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+int arch_add_memory(u64 start, u64 size)
+{
+ struct pglist_data *pgdata = &contig_page_data;
+ struct zone *zone = pgdata->node_zones + MAX_NR_ZONES-1;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+
+ return __add_pages(zone, start_pfn, nr_pages);
+}
+
+int remove_memory(u64 start, u64 size)
+{
+ return -EINVAL;
+}
+#endif
+
+struct kmem_cache *pgd_cache;
+
+void __init pgtable_cache_init(void)
+{
+ pgd_cache = kmem_cache_create("pgd",
+ PTRS_PER_PGD*sizeof(pgd_t),
+ PTRS_PER_PGD*sizeof(pgd_t),
+ 0,
+ NULL);
+ if (!pgd_cache)
+ panic("pgtable_cache_init(): Cannot create pgd cache");
+}
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+/*
+ * The __w1data area holds data that is only written during initialization,
+ * and is read-only and thus freely cacheable thereafter. Fix the page
+ * table entries that cover that region accordingly.
+ */
+static void mark_w1data_ro(void)
+{
+ /* Loop over page table entries */
+ unsigned long addr = (unsigned long)__w1data_begin;
+ BUG_ON((addr & (PAGE_SIZE-1)) != 0);
+ for (; addr <= (unsigned long)__w1data_end - 1; addr += PAGE_SIZE) {
+ unsigned long pfn = kaddr_to_pfn((void *)addr);
+ struct page *page = pfn_to_page(pfn);
+ pte_t *ptep = virt_to_pte(NULL, addr);
+ BUG_ON(pte_huge(*ptep)); /* not relevant for kdata_huge */
+ set_pte_at(&init_mm, addr, ptep, pfn_pte(pfn, PAGE_KERNEL_RO));
+ }
+}
+#endif
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+static long __write_once initfree;
+#else
+static long __write_once initfree = 1;
+#endif
+
+/* Select whether to free (1) or mark unusable (0) the __init pages. */
+static int __init set_initfree(char *str)
+{
+ strict_strtol(str, 0, &initfree);
+ printk("initfree: %s free init pages\n", initfree ? "will" : "won't");
+ return 1;
+}
+__setup("initfree=", set_initfree);
+
+static void free_init_pages(char *what, unsigned long begin, unsigned long end)
+{
+ unsigned long addr = (unsigned long) begin;
+
+ if (kdata_huge && !initfree) {
+ printk("Warning: ignoring initfree=0:"
+ " incompatible with kdata=huge\n");
+ initfree = 1;
+ }
+ end = (end + PAGE_SIZE - 1) & PAGE_MASK;
+ local_flush_tlb_pages(NULL, begin, PAGE_SIZE, end - begin);
+ for (addr = begin; addr < end; addr += PAGE_SIZE) {
+ /*
+ * Note we just reset the home here directly in the
+ * page table. We know this is safe because our caller
+ * just flushed the caches on all the other cpus,
+ * and they won't be touching any of these pages.
+ */
+ int pfn = kaddr_to_pfn((void *)addr);
+ struct page *page = pfn_to_page(pfn);
+ pte_t *ptep = virt_to_pte(NULL, addr);
+ if (!initfree) {
+ /*
+ * If debugging page accesses then do not free
+ * this memory but mark them not present - any
+ * buggy init-section access will create a
+ * kernel page fault:
+ */
+ pte_clear(&init_mm, addr, ptep);
+ continue;
+ }
+ __ClearPageReserved(page);
+ init_page_count(page);
+ if (pte_huge(*ptep))
+ BUG_ON(!kdata_huge);
+ else
+ set_pte_at(&init_mm, addr, ptep,
+ pfn_pte(pfn, PAGE_KERNEL));
+ memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE);
+ free_page(addr);
+ totalram_pages++;
+ }
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+void free_initmem(void)
+{
+ const unsigned long text_delta = MEM_SV_INTRPT - PAGE_OFFSET;
+
+ /*
+ * Evict the dirty initdata on the boot cpu, evict the w1data
+ * wherever it's homed, and evict all the init code everywhere.
+ * We are guaranteed that no one will touch the init pages any
+ * more, and although other cpus may be touching the w1data,
+ * we only actually change the caching on tile64, which won't
+ * be keeping local copies in the other tiles' caches anyway.
+ */
+ homecache_evict(&cpu_cacheable_map);
+
+ /* Free the data pages that we won't use again after init. */
+ free_init_pages("unused kernel data",
+ (unsigned long)_sinitdata,
+ (unsigned long)_einitdata);
+
+ /*
+ * Free the pages mapped from 0xc0000000 that correspond to code
+ * pages from 0xfd000000 that we won't use again after init.
+ */
+ free_init_pages("unused kernel text",
+ (unsigned long)_sinittext - text_delta,
+ (unsigned long)_einittext - text_delta);
+
+#if !CHIP_HAS_COHERENT_LOCAL_CACHE()
+ /*
+ * Upgrade the .w1data section to globally cached.
+ * We don't do this on tilepro, since the cache architecture
+ * pretty much makes it irrelevant, and in any case we end
+ * up having racing issues with other tiles that may touch
+ * the data after we flush the cache but before we update
+ * the PTEs and flush the TLBs, causing sharer shootdowns
+ * later. Even though this is to clean data, it seems like
+ * an unnecessary complication.
+ */
+ mark_w1data_ro();
+#endif
+
+ /* Do a global TLB flush so everyone sees the changes. */
+ flush_tlb_all();
+}
diff --git a/arch/tile/mm/migrate.h b/arch/tile/mm/migrate.h
new file mode 100644
index 000000000000..cd45a0837fa6
--- /dev/null
+++ b/arch/tile/mm/migrate.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Structure definitions for migration, exposed here for use by
+ * arch/tile/kernel/asm-offsets.c.
+ */
+
+#ifndef MM_MIGRATE_H
+#define MM_MIGRATE_H
+
+#include <linux/cpumask.h>
+#include <hv/hypervisor.h>
+
+/*
+ * This function is used as a helper when setting up the initial
+ * page table (swapper_pg_dir).
+ */
+extern int flush_and_install_context(HV_PhysAddr page_table, HV_PTE access,
+ HV_ASID asid,
+ const unsigned long *cpumask);
+
+/*
+ * This function supports migration as a "helper" as follows:
+ *
+ * - Set the stack PTE itself to "migrating".
+ * - Do a global TLB flush for (va,length) and the specified ASIDs.
+ * - Do a cache-evict on all necessary cpus.
+ * - Write the new stack PTE.
+ *
+ * Note that any non-NULL pointers must not point to the page that
+ * is handled by the stack_pte itself.
+ */
+extern int homecache_migrate_stack_and_flush(pte_t stack_pte, unsigned long va,
+ size_t length, pte_t *stack_ptep,
+ const struct cpumask *cache_cpumask,
+ const struct cpumask *tlb_cpumask,
+ HV_Remote_ASID *asids,
+ int asidcount);
+
+#endif /* MM_MIGRATE_H */
diff --git a/arch/tile/mm/migrate_32.S b/arch/tile/mm/migrate_32.S
new file mode 100644
index 000000000000..f738765cd1e6
--- /dev/null
+++ b/arch/tile/mm/migrate_32.S
@@ -0,0 +1,211 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * This routine is a helper for migrating the home of a set of pages to
+ * a new cpu. See the documentation in homecache.c for more information.
+ */
+
+#include <linux/linkage.h>
+#include <linux/threads.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/asm-offsets.h>
+#include <hv/hypervisor.h>
+
+ .text
+
+/*
+ * First, some definitions that apply to all the code in the file.
+ */
+
+/* Locals (caller-save) */
+#define r_tmp r10
+#define r_save_sp r11
+
+/* What we save where in the stack frame; must include all callee-saves. */
+#define FRAME_SP 4
+#define FRAME_R30 8
+#define FRAME_R31 12
+#define FRAME_R32 16
+#define FRAME_R33 20
+#define FRAME_R34 24
+#define FRAME_R35 28
+#define FRAME_SIZE 32
+
+
+
+
+/*
+ * On entry:
+ *
+ * r0 low word of the new context PA to install (moved to r_context_lo)
+ * r1 high word of the new context PA to install (moved to r_context_hi)
+ * r2 low word of PTE to use for context access (moved to r_access_lo)
+ * r3 high word of PTE to use for context access (moved to r_access_lo)
+ * r4 ASID to use for new context (moved to r_asid)
+ * r5 pointer to cpumask with just this cpu set in it (r_my_cpumask)
+ */
+
+/* Arguments (caller-save) */
+#define r_context_lo_in r0
+#define r_context_hi_in r1
+#define r_access_lo_in r2
+#define r_access_hi_in r3
+#define r_asid_in r4
+#define r_my_cpumask r5
+
+/* Locals (callee-save); must not be more than FRAME_xxx above. */
+#define r_save_ics r30
+#define r_context_lo r31
+#define r_context_hi r32
+#define r_access_lo r33
+#define r_access_hi r34
+#define r_asid r35
+
+STD_ENTRY(flush_and_install_context)
+ /*
+ * Create a stack frame; we can't touch it once we flush the
+ * cache until we install the new page table and flush the TLB.
+ */
+ {
+ move r_save_sp, sp
+ sw sp, lr
+ addi sp, sp, -FRAME_SIZE
+ }
+ addi r_tmp, sp, FRAME_SP
+ {
+ sw r_tmp, r_save_sp
+ addi r_tmp, sp, FRAME_R30
+ }
+ {
+ sw r_tmp, r30
+ addi r_tmp, sp, FRAME_R31
+ }
+ {
+ sw r_tmp, r31
+ addi r_tmp, sp, FRAME_R32
+ }
+ {
+ sw r_tmp, r32
+ addi r_tmp, sp, FRAME_R33
+ }
+ {
+ sw r_tmp, r33
+ addi r_tmp, sp, FRAME_R34
+ }
+ {
+ sw r_tmp, r34
+ addi r_tmp, sp, FRAME_R35
+ }
+ sw r_tmp, r35
+
+ /* Move some arguments to callee-save registers. */
+ {
+ move r_context_lo, r_context_lo_in
+ move r_context_hi, r_context_hi_in
+ }
+ {
+ move r_access_lo, r_access_lo_in
+ move r_access_hi, r_access_hi_in
+ }
+ move r_asid, r_asid_in
+
+ /* Disable interrupts, since we can't use our stack. */
+ {
+ mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION
+ movei r_tmp, 1
+ }
+ mtspr INTERRUPT_CRITICAL_SECTION, r_tmp
+
+ /* First, flush our L2 cache. */
+ {
+ move r0, zero /* cache_pa */
+ move r1, zero
+ }
+ {
+ auli r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */
+ move r3, r_my_cpumask /* cache_cpumask */
+ }
+ {
+ move r4, zero /* tlb_va */
+ move r5, zero /* tlb_length */
+ }
+ {
+ move r6, zero /* tlb_pgsize */
+ move r7, zero /* tlb_cpumask */
+ }
+ {
+ move r8, zero /* asids */
+ move r9, zero /* asidcount */
+ }
+ jal hv_flush_remote
+ bnz r0, .Ldone
+
+ /* Now install the new page table. */
+ {
+ move r0, r_context_lo
+ move r1, r_context_hi
+ }
+ {
+ move r2, r_access_lo
+ move r3, r_access_hi
+ }
+ {
+ move r4, r_asid
+ movei r5, HV_CTX_DIRECTIO
+ }
+ jal hv_install_context
+ bnz r0, .Ldone
+
+ /* Finally, flush the TLB. */
+ {
+ movei r0, 0 /* preserve_global */
+ jal hv_flush_all
+ }
+
+.Ldone:
+ /* Reset interrupts back how they were before. */
+ mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics
+
+ /* Restore the callee-saved registers and return. */
+ addli lr, sp, FRAME_SIZE
+ {
+ lw lr, lr
+ addli r_tmp, sp, FRAME_R30
+ }
+ {
+ lw r30, r_tmp
+ addli r_tmp, sp, FRAME_R31
+ }
+ {
+ lw r31, r_tmp
+ addli r_tmp, sp, FRAME_R32
+ }
+ {
+ lw r32, r_tmp
+ addli r_tmp, sp, FRAME_R33
+ }
+ {
+ lw r33, r_tmp
+ addli r_tmp, sp, FRAME_R34
+ }
+ {
+ lw r34, r_tmp
+ addli r_tmp, sp, FRAME_R35
+ }
+ {
+ lw r35, r_tmp
+ addi sp, sp, FRAME_SIZE
+ }
+ jrp lr
+ STD_ENDPROC(flush_and_install_context)
diff --git a/arch/tile/mm/mmap.c b/arch/tile/mm/mmap.c
new file mode 100644
index 000000000000..f96f4cec602a
--- /dev/null
+++ b/arch/tile/mm/mmap.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ *
+ * Taken from the i386 architecture and simplified.
+ */
+
+#include <linux/mm.h>
+#include <linux/random.h>
+#include <linux/limits.h>
+#include <linux/sched.h>
+#include <linux/mman.h>
+#include <linux/compat.h>
+
+/*
+ * Top of mmap area (just below the process stack).
+ *
+ * Leave an at least ~128 MB hole.
+ */
+#define MIN_GAP (128*1024*1024)
+#define MAX_GAP (TASK_SIZE/6*5)
+
+static inline unsigned long mmap_base(struct mm_struct *mm)
+{
+ unsigned long gap = rlimit(RLIMIT_STACK);
+ unsigned long random_factor = 0;
+
+ if (current->flags & PF_RANDOMIZE)
+ random_factor = get_random_int() % (1024*1024);
+
+ if (gap < MIN_GAP)
+ gap = MIN_GAP;
+ else if (gap > MAX_GAP)
+ gap = MAX_GAP;
+
+ return PAGE_ALIGN(TASK_SIZE - gap - random_factor);
+}
+
+/*
+ * This function, called very early during the creation of a new
+ * process VM image, sets up which VM layout function to use:
+ */
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+#if !defined(__tilegx__)
+ int is_32bit = 1;
+#elif defined(CONFIG_COMPAT)
+ int is_32bit = is_compat_task();
+#else
+ int is_32bit = 0;
+#endif
+
+ /*
+ * Use standard layout if the expected stack growth is unlimited
+ * or we are running native 64 bits.
+ */
+ if (!is_32bit || rlimit(RLIMIT_STACK) == RLIM_INFINITY) {
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+ } else {
+ mm->mmap_base = mmap_base(mm);
+ mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+ mm->unmap_area = arch_unmap_area_topdown;
+ }
+}
diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c
new file mode 100644
index 000000000000..289e729bbd76
--- /dev/null
+++ b/arch/tile/mm/pgtable.c
@@ -0,0 +1,566 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/smp.h>
+#include <linux/highmem.h>
+#include <linux/slab.h>
+#include <linux/pagemap.h>
+#include <linux/spinlock.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/smp.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/fixmap.h>
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+#include <asm/homecache.h>
+
+#define K(x) ((x) << (PAGE_SHIFT-10))
+
+/*
+ * The normal show_free_areas() is too verbose on Tile, with dozens
+ * of processors and often four NUMA zones each with high and lowmem.
+ */
+void show_mem(void)
+{
+ struct zone *zone;
+
+ printk("Active:%lu inactive:%lu dirty:%lu writeback:%lu unstable:%lu"
+ " free:%lu\n slab:%lu mapped:%lu pagetables:%lu bounce:%lu"
+ " pagecache:%lu swap:%lu\n",
+ (global_page_state(NR_ACTIVE_ANON) +
+ global_page_state(NR_ACTIVE_FILE)),
+ (global_page_state(NR_INACTIVE_ANON) +
+ global_page_state(NR_INACTIVE_FILE)),
+ global_page_state(NR_FILE_DIRTY),
+ global_page_state(NR_WRITEBACK),
+ global_page_state(NR_UNSTABLE_NFS),
+ global_page_state(NR_FREE_PAGES),
+ (global_page_state(NR_SLAB_RECLAIMABLE) +
+ global_page_state(NR_SLAB_UNRECLAIMABLE)),
+ global_page_state(NR_FILE_MAPPED),
+ global_page_state(NR_PAGETABLE),
+ global_page_state(NR_BOUNCE),
+ global_page_state(NR_FILE_PAGES),
+ nr_swap_pages);
+
+ for_each_zone(zone) {
+ unsigned long flags, order, total = 0, largest_order = -1;
+
+ if (!populated_zone(zone))
+ continue;
+
+ printk("Node %d %7s: ", zone_to_nid(zone), zone->name);
+ spin_lock_irqsave(&zone->lock, flags);
+ for (order = 0; order < MAX_ORDER; order++) {
+ int nr = zone->free_area[order].nr_free;
+ total += nr << order;
+ if (nr)
+ largest_order = order;
+ }
+ spin_unlock_irqrestore(&zone->lock, flags);
+ printk("%lukB (largest %luKb)\n",
+ K(total), largest_order ? K(1UL) << largest_order : 0);
+ }
+}
+
+/*
+ * Associate a virtual page frame with a given physical page frame
+ * and protection flags for that frame.
+ */
+static void set_pte_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ pte_t *pte;
+
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ BUG();
+ return;
+ }
+ pud = pud_offset(pgd, vaddr);
+ if (pud_none(*pud)) {
+ BUG();
+ return;
+ }
+ pmd = pmd_offset(pud, vaddr);
+ if (pmd_none(*pmd)) {
+ BUG();
+ return;
+ }
+ pte = pte_offset_kernel(pmd, vaddr);
+ /* <pfn,flags> stored as-is, to permit clearing entries */
+ set_pte(pte, pfn_pte(pfn, flags));
+
+ /*
+ * It's enough to flush this one mapping.
+ * This appears conservative since it is only called
+ * from __set_fixmap.
+ */
+ local_flush_tlb_page(NULL, vaddr, PAGE_SIZE);
+}
+
+/*
+ * Associate a huge virtual page frame with a given physical page frame
+ * and protection flags for that frame. pfn is for the base of the page,
+ * vaddr is what the page gets mapped to - both must be properly aligned.
+ * The pmd must already be instantiated.
+ */
+void set_pmd_pfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
+ printk(KERN_WARNING "set_pmd_pfn: vaddr misaligned\n");
+ return; /* BUG(); */
+ }
+ if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
+ printk(KERN_WARNING "set_pmd_pfn: pfn misaligned\n");
+ return; /* BUG(); */
+ }
+ pgd = swapper_pg_dir + pgd_index(vaddr);
+ if (pgd_none(*pgd)) {
+ printk(KERN_WARNING "set_pmd_pfn: pgd_none\n");
+ return; /* BUG(); */
+ }
+ pud = pud_offset(pgd, vaddr);
+ pmd = pmd_offset(pud, vaddr);
+ set_pmd(pmd, ptfn_pmd(HV_PFN_TO_PTFN(pfn), flags));
+ /*
+ * It's enough to flush this one mapping.
+ * We flush both small and huge TSBs to be sure.
+ */
+ local_flush_tlb_page(NULL, vaddr, HPAGE_SIZE);
+ local_flush_tlb_pages(NULL, vaddr, PAGE_SIZE, HPAGE_SIZE);
+}
+
+void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags)
+{
+ unsigned long address = __fix_to_virt(idx);
+
+ if (idx >= __end_of_fixed_addresses) {
+ BUG();
+ return;
+ }
+ set_pte_pfn(address, phys >> PAGE_SHIFT, flags);
+}
+
+#if defined(CONFIG_HIGHPTE)
+pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type)
+{
+ pte_t *pte = kmap_atomic(pmd_page(*dir), type) +
+ (pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK;
+ return &pte[pte_index(address)];
+}
+#endif
+
+/*
+ * List of all pgd's needed so it can invalidate entries in both cached
+ * and uncached pgd's. This is essentially codepath-based locking
+ * against pageattr.c; it is the unique case in which a valid change
+ * of kernel pagetables can't be lazily synchronized by vmalloc faults.
+ * vmalloc faults work because attached pagetables are never freed.
+ * The locking scheme was chosen on the basis of manfred's
+ * recommendations and having no core impact whatsoever.
+ * -- wli
+ */
+DEFINE_SPINLOCK(pgd_lock);
+LIST_HEAD(pgd_list);
+
+static inline void pgd_list_add(pgd_t *pgd)
+{
+ list_add(pgd_to_list(pgd), &pgd_list);
+}
+
+static inline void pgd_list_del(pgd_t *pgd)
+{
+ list_del(pgd_to_list(pgd));
+}
+
+#define KERNEL_PGD_INDEX_START pgd_index(PAGE_OFFSET)
+#define KERNEL_PGD_PTRS (PTRS_PER_PGD - KERNEL_PGD_INDEX_START)
+
+static void pgd_ctor(pgd_t *pgd)
+{
+ unsigned long flags;
+
+ memset(pgd, 0, KERNEL_PGD_INDEX_START*sizeof(pgd_t));
+ spin_lock_irqsave(&pgd_lock, flags);
+
+#ifndef __tilegx__
+ /*
+ * Check that the user interrupt vector has no L2.
+ * It never should for the swapper, and new page tables
+ * should always start with an empty user interrupt vector.
+ */
+ BUG_ON(((u64 *)swapper_pg_dir)[pgd_index(MEM_USER_INTRPT)] != 0);
+#endif
+
+ clone_pgd_range(pgd + KERNEL_PGD_INDEX_START,
+ swapper_pg_dir + KERNEL_PGD_INDEX_START,
+ KERNEL_PGD_PTRS);
+
+ pgd_list_add(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+static void pgd_dtor(pgd_t *pgd)
+{
+ unsigned long flags; /* can be called from interrupt context */
+
+ spin_lock_irqsave(&pgd_lock, flags);
+ pgd_list_del(pgd);
+ spin_unlock_irqrestore(&pgd_lock, flags);
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *pgd = kmem_cache_alloc(pgd_cache, GFP_KERNEL);
+ if (pgd)
+ pgd_ctor(pgd);
+ return pgd;
+}
+
+void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ pgd_dtor(pgd);
+ kmem_cache_free(pgd_cache, pgd);
+}
+
+
+#define L2_USER_PGTABLE_PAGES (1 << L2_USER_PGTABLE_ORDER)
+
+struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+ int flags = GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO|__GFP_COMP;
+ struct page *p;
+
+#ifdef CONFIG_HIGHPTE
+ flags |= __GFP_HIGHMEM;
+#endif
+
+ p = alloc_pages(flags, L2_USER_PGTABLE_ORDER);
+ if (p == NULL)
+ return NULL;
+
+ pgtable_page_ctor(p);
+ return p;
+}
+
+/*
+ * Free page immediately (used in __pte_alloc if we raced with another
+ * process). We have to correct whatever pte_alloc_one() did before
+ * returning the pages to the allocator.
+ */
+void pte_free(struct mm_struct *mm, struct page *p)
+{
+ pgtable_page_dtor(p);
+ __free_pages(p, L2_USER_PGTABLE_ORDER);
+}
+
+void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+ unsigned long address)
+{
+ int i;
+
+ pgtable_page_dtor(pte);
+ tlb->need_flush = 1;
+ if (tlb_fast_mode(tlb)) {
+ struct page *pte_pages[L2_USER_PGTABLE_PAGES];
+ for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i)
+ pte_pages[i] = pte + i;
+ free_pages_and_swap_cache(pte_pages, L2_USER_PGTABLE_PAGES);
+ return;
+ }
+ for (i = 0; i < L2_USER_PGTABLE_PAGES; ++i) {
+ tlb->pages[tlb->nr++] = pte + i;
+ if (tlb->nr >= FREE_PTE_NR)
+ tlb_flush_mmu(tlb, 0, 0);
+ }
+}
+
+#ifndef __tilegx__
+
+/*
+ * FIXME: needs to be atomic vs hypervisor writes. For now we make the
+ * window of vulnerability a bit smaller by doing an unlocked 8-bit update.
+ */
+int ptep_test_and_clear_young(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+#if HV_PTE_INDEX_ACCESSED < 8 || HV_PTE_INDEX_ACCESSED >= 16
+# error Code assumes HV_PTE "accessed" bit in second byte
+#endif
+ u8 *tmp = (u8 *)ptep;
+ u8 second_byte = tmp[1];
+ if (!(second_byte & (1 << (HV_PTE_INDEX_ACCESSED - 8))))
+ return 0;
+ tmp[1] = second_byte & ~(1 << (HV_PTE_INDEX_ACCESSED - 8));
+ return 1;
+}
+
+/*
+ * This implementation is atomic vs hypervisor writes, since the hypervisor
+ * always writes the low word (where "accessed" and "dirty" are) and this
+ * routine only writes the high word.
+ */
+void ptep_set_wrprotect(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+#if HV_PTE_INDEX_WRITABLE < 32
+# error Code assumes HV_PTE "writable" bit in high word
+#endif
+ u32 *tmp = (u32 *)ptep;
+ tmp[1] = tmp[1] & ~(1 << (HV_PTE_INDEX_WRITABLE - 32));
+}
+
+#endif
+
+pte_t *virt_to_pte(struct mm_struct* mm, unsigned long addr)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ if (pgd_addr_invalid(addr))
+ return NULL;
+
+ pgd = mm ? pgd_offset(mm, addr) : swapper_pg_dir + pgd_index(addr);
+ pud = pud_offset(pgd, addr);
+ if (!pud_present(*pud))
+ return NULL;
+ pmd = pmd_offset(pud, addr);
+ if (pmd_huge_page(*pmd))
+ return (pte_t *)pmd;
+ if (!pmd_present(*pmd))
+ return NULL;
+ return pte_offset_kernel(pmd, addr);
+}
+
+pgprot_t set_remote_cache_cpu(pgprot_t prot, int cpu)
+{
+ unsigned int width = smp_width;
+ int x = cpu % width;
+ int y = cpu / width;
+ BUG_ON(y >= smp_height);
+ BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3);
+ BUG_ON(cpu < 0 || cpu >= NR_CPUS);
+ BUG_ON(!cpu_is_valid_lotar(cpu));
+ return hv_pte_set_lotar(prot, HV_XY_TO_LOTAR(x, y));
+}
+
+int get_remote_cache_cpu(pgprot_t prot)
+{
+ HV_LOTAR lotar = hv_pte_get_lotar(prot);
+ int x = HV_LOTAR_X(lotar);
+ int y = HV_LOTAR_Y(lotar);
+ BUG_ON(hv_pte_get_mode(prot) != HV_PTE_MODE_CACHE_TILE_L3);
+ return x + y * smp_width;
+}
+
+void set_pte_order(pte_t *ptep, pte_t pte, int order)
+{
+ unsigned long pfn = pte_pfn(pte);
+ struct page *page = pfn_to_page(pfn);
+
+ /* Update the home of a PTE if necessary */
+ pte = pte_set_home(pte, page_home(page));
+
+#ifdef __tilegx__
+ *ptep = pte;
+#else
+ /*
+ * When setting a PTE, write the high bits first, then write
+ * the low bits. This sets the "present" bit only after the
+ * other bits are in place. If a particular PTE update
+ * involves transitioning from one valid PTE to another, it
+ * may be necessary to call set_pte_order() more than once,
+ * transitioning via a suitable intermediate state.
+ * Note that this sequence also means that if we are transitioning
+ * from any migrating PTE to a non-migrating one, we will not
+ * see a half-updated PTE with the migrating bit off.
+ */
+#if HV_PTE_INDEX_PRESENT >= 32 || HV_PTE_INDEX_MIGRATING >= 32
+# error Must write the present and migrating bits last
+#endif
+ ((u32 *)ptep)[1] = (u32)(pte_val(pte) >> 32);
+ barrier();
+ ((u32 *)ptep)[0] = (u32)(pte_val(pte));
+#endif
+}
+
+/* Can this mm load a PTE with cached_priority set? */
+static inline int mm_is_priority_cached(struct mm_struct *mm)
+{
+ return mm->context.priority_cached;
+}
+
+/*
+ * Add a priority mapping to an mm_context and
+ * notify the hypervisor if this is the first one.
+ */
+void start_mm_caching(struct mm_struct *mm)
+{
+ if (!mm_is_priority_cached(mm)) {
+ mm->context.priority_cached = -1U;
+ hv_set_caching(-1U);
+ }
+}
+
+/*
+ * Validate and return the priority_cached flag. We know if it's zero
+ * that we don't need to scan, since we immediately set it non-zero
+ * when we first consider a MAP_CACHE_PRIORITY mapping.
+ *
+ * We only _try_ to acquire the mmap_sem semaphore; if we can't acquire it,
+ * since we're in an interrupt context (servicing switch_mm) we don't
+ * worry about it and don't unset the "priority_cached" field.
+ * Presumably we'll come back later and have more luck and clear
+ * the value then; for now we'll just keep the cache marked for priority.
+ */
+static unsigned int update_priority_cached(struct mm_struct *mm)
+{
+ if (mm->context.priority_cached && down_write_trylock(&mm->mmap_sem)) {
+ struct vm_area_struct *vm;
+ for (vm = mm->mmap; vm; vm = vm->vm_next) {
+ if (hv_pte_get_cached_priority(vm->vm_page_prot))
+ break;
+ }
+ if (vm == NULL)
+ mm->context.priority_cached = 0;
+ up_write(&mm->mmap_sem);
+ }
+ return mm->context.priority_cached;
+}
+
+/* Set caching correctly for an mm that we are switching to. */
+void check_mm_caching(struct mm_struct *prev, struct mm_struct *next)
+{
+ if (!mm_is_priority_cached(next)) {
+ /*
+ * If the new mm doesn't use priority caching, just see if we
+ * need the hv_set_caching(), or can assume it's already zero.
+ */
+ if (mm_is_priority_cached(prev))
+ hv_set_caching(0);
+ } else {
+ hv_set_caching(update_priority_cached(next));
+ }
+}
+
+#if CHIP_HAS_MMIO()
+
+/* Map an arbitrary MMIO address, homed according to pgprot, into VA space. */
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+ pgprot_t home)
+{
+ void *addr;
+ struct vm_struct *area;
+ unsigned long offset, last_addr;
+ pgprot_t pgprot;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /* Create a read/write, MMIO VA mapping homed at the requested shim. */
+ pgprot = PAGE_KERNEL;
+ pgprot = hv_pte_set_mode(pgprot, HV_PTE_MODE_MMIO);
+ pgprot = hv_pte_set_lotar(pgprot, hv_pte_get_lotar(home));
+
+ /*
+ * Mappings have to be page-aligned
+ */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr+1) - phys_addr;
+
+ /*
+ * Ok, go for it..
+ */
+ area = get_vm_area(size, VM_IOREMAP /* | other flags? */);
+ if (!area)
+ return NULL;
+ area->phys_addr = phys_addr;
+ addr = area->addr;
+ if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
+ phys_addr, pgprot)) {
+ remove_vm_area((void *)(PAGE_MASK & (unsigned long) addr));
+ return NULL;
+ }
+ return (__force void __iomem *) (offset + (char *)addr);
+}
+EXPORT_SYMBOL(ioremap_prot);
+
+/* Map a PCI MMIO bus address into VA space. */
+void __iomem *ioremap(resource_size_t phys_addr, unsigned long size)
+{
+ panic("ioremap for PCI MMIO is not supported");
+}
+EXPORT_SYMBOL(ioremap);
+
+/* Unmap an MMIO VA mapping. */
+void iounmap(volatile void __iomem *addr_in)
+{
+ volatile void __iomem *addr = (volatile void __iomem *)
+ (PAGE_MASK & (unsigned long __force)addr_in);
+#if 1
+ vunmap((void * __force)addr);
+#else
+ /* x86 uses this complicated flow instead of vunmap(). Is
+ * there any particular reason we should do the same? */
+ struct vm_struct *p, *o;
+
+ /* Use the vm area unlocked, assuming the caller
+ ensures there isn't another iounmap for the same address
+ in parallel. Reuse of the virtual address is prevented by
+ leaving it in the global lists until we're done with it.
+ cpa takes care of the direct mappings. */
+ read_lock(&vmlist_lock);
+ for (p = vmlist; p; p = p->next) {
+ if (p->addr == addr)
+ break;
+ }
+ read_unlock(&vmlist_lock);
+
+ if (!p) {
+ printk("iounmap: bad address %p\n", addr);
+ dump_stack();
+ return;
+ }
+
+ /* Finally remove it */
+ o = remove_vm_area((void *)addr);
+ BUG_ON(p != o || o == NULL);
+ kfree(p);
+#endif
+}
+EXPORT_SYMBOL(iounmap);
+
+#endif /* CHIP_HAS_MMIO() */