diff options
Diffstat (limited to 'arch/tile/include/asm')
| -rw-r--r-- | arch/tile/include/asm/Kbuild | 1 | ||||
| -rw-r--r-- | arch/tile/include/asm/cache.h | 12 | ||||
| -rw-r--r-- | arch/tile/include/asm/checksum.h | 18 | ||||
| -rw-r--r-- | arch/tile/include/asm/device.h | 33 | ||||
| -rw-r--r-- | arch/tile/include/asm/dma-mapping.h | 146 | ||||
| -rw-r--r-- | arch/tile/include/asm/fixmap.h | 14 | ||||
| -rw-r--r-- | arch/tile/include/asm/homecache.h | 19 | ||||
| -rw-r--r-- | arch/tile/include/asm/io.h | 144 | ||||
| -rw-r--r-- | arch/tile/include/asm/memprof.h | 33 | ||||
| -rw-r--r-- | arch/tile/include/asm/page.h | 7 | ||||
| -rw-r--r-- | arch/tile/include/asm/pci.h | 151 |
11 files changed, 439 insertions, 139 deletions
diff --git a/arch/tile/include/asm/Kbuild b/arch/tile/include/asm/Kbuild index 143473e3a0bb..fb7c65ae8de0 100644 --- a/arch/tile/include/asm/Kbuild +++ b/arch/tile/include/asm/Kbuild @@ -9,7 +9,6 @@ header-y += hardwall.h generic-y += bug.h generic-y += bugs.h generic-y += cputime.h -generic-y += device.h generic-y += div64.h generic-y += emergency-restart.h generic-y += errno.h diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 392e5333dd8b..a9a529964e07 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -27,11 +27,17 @@ #define L2_CACHE_ALIGN(x) (((x)+(L2_CACHE_BYTES-1)) & -L2_CACHE_BYTES) /* - * TILE-Gx is fully coherent so we don't need to define ARCH_DMA_MINALIGN. + * TILEPro I/O is not always coherent (networking typically uses coherent + * I/O, but PCI traffic does not) and setting ARCH_DMA_MINALIGN to the + * L2 cacheline size helps ensure that kernel heap allocations are aligned. + * TILE-Gx I/O is always coherent when used on hash-for-home pages. + * + * However, it's possible at runtime to request not to use hash-for-home + * for the kernel heap, in which case the kernel will use flush-and-inval + * to manage coherence. As a result, we use L2_CACHE_BYTES for the + * DMA minimum alignment to avoid false sharing in the kernel heap. */ -#ifndef __tilegx__ #define ARCH_DMA_MINALIGN L2_CACHE_BYTES -#endif /* use the cache line size for the L2, which is where it counts */ #define SMP_CACHE_BYTES_SHIFT L2_CACHE_SHIFT diff --git a/arch/tile/include/asm/checksum.h b/arch/tile/include/asm/checksum.h index a120766c7264..b21a2fdec9f7 100644 --- a/arch/tile/include/asm/checksum.h +++ b/arch/tile/include/asm/checksum.h @@ -21,4 +21,22 @@ __wsum do_csum(const unsigned char *buff, int len); #define do_csum do_csum +/* + * Return the sum of all the 16-bit subwords in a long. + * This sums two subwords on a 32-bit machine, and four on 64 bits. + * The implementation does two vector adds to capture any overflow. + */ +static inline unsigned int csum_long(unsigned long x) +{ + unsigned long ret; +#ifdef __tilegx__ + ret = __insn_v2sadu(x, 0); + ret = __insn_v2sadu(ret, 0); +#else + ret = __insn_sadh_u(x, 0); + ret = __insn_sadh_u(ret, 0); +#endif + return ret; +} + #endif /* _ASM_TILE_CHECKSUM_H */ diff --git a/arch/tile/include/asm/device.h b/arch/tile/include/asm/device.h new file mode 100644 index 000000000000..5182705bd056 --- /dev/null +++ b/arch/tile/include/asm/device.h @@ -0,0 +1,33 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Arch specific extensions to struct device + */ + +#ifndef _ASM_TILE_DEVICE_H +#define _ASM_TILE_DEVICE_H + +struct dev_archdata { + /* DMA operations on that device */ + struct dma_map_ops *dma_ops; + + /* Offset of the DMA address from the PA. */ + dma_addr_t dma_offset; + + /* Highest DMA address that can be generated by this device. */ + dma_addr_t max_direct_dma_addr; +}; + +struct pdev_archdata { +}; + +#endif /* _ASM_TILE_DEVICE_H */ diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h index eaa06d175b39..4b6247d1a315 100644 --- a/arch/tile/include/asm/dma-mapping.h +++ b/arch/tile/include/asm/dma-mapping.h @@ -20,69 +20,80 @@ #include <linux/cache.h> #include <linux/io.h> -/* - * Note that on x86 and powerpc, there is a "struct dma_mapping_ops" - * that is used for all the DMA operations. For now, we don't have an - * equivalent on tile, because we only have a single way of doing DMA. - * (Tilera bug 7994 to use dma_mapping_ops.) - */ +extern struct dma_map_ops *tile_dma_map_ops; +extern struct dma_map_ops *gx_pci_dma_map_ops; +extern struct dma_map_ops *gx_legacy_pci_dma_map_ops; + +static inline struct dma_map_ops *get_dma_ops(struct device *dev) +{ + if (dev && dev->archdata.dma_ops) + return dev->archdata.dma_ops; + else + return tile_dma_map_ops; +} + +static inline dma_addr_t get_dma_offset(struct device *dev) +{ + return dev->archdata.dma_offset; +} + +static inline void set_dma_offset(struct device *dev, dma_addr_t off) +{ + dev->archdata.dma_offset = off; +} -#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) -#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) - -extern dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction); -extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction); -extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction); -extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nhwentries, enum dma_data_direction); -extern dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction); -extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, - size_t size, enum dma_data_direction); -extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction); -extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, - int nelems, enum dma_data_direction); - - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag); - -void dma_free_coherent(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle); - -extern void dma_sync_single_for_cpu(struct device *, dma_addr_t, size_t, - enum dma_data_direction); -extern void dma_sync_single_for_device(struct device *, dma_addr_t, - size_t, enum dma_data_direction); -extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, - unsigned long offset, size_t, - enum dma_data_direction); -extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, - unsigned long offset, size_t, - enum dma_data_direction); -extern void dma_cache_sync(struct device *dev, void *vaddr, size_t, - enum dma_data_direction); +static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return paddr + get_dma_offset(dev); +} + +static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr) +{ + return daddr - get_dma_offset(dev); +} + +static inline void dma_mark_clean(void *addr, size_t size) {} + +#include <asm-generic/dma-mapping-common.h> + +static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops) +{ + dev->archdata.dma_ops = ops; +} + +static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size) +{ + if (!dev->dma_mask) + return 0; + + return addr + size - 1 <= *dev->dma_mask; +} static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return 0; + return get_dma_ops(dev)->mapping_error(dev, dma_addr); } static inline int dma_supported(struct device *dev, u64 mask) { - return 1; + return get_dma_ops(dev)->dma_supported(dev, mask); } static inline int dma_set_mask(struct device *dev, u64 mask) { + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + /* Handle legacy PCI devices with limited memory addressability. */ + if ((dma_ops == gx_pci_dma_map_ops) && (mask <= DMA_BIT_MASK(32))) { + set_dma_ops(dev, gx_legacy_pci_dma_map_ops); + set_dma_offset(dev, 0); + if (mask > dev->archdata.max_direct_dma_addr) + mask = dev->archdata.max_direct_dma_addr; + } + if (!dev->dma_mask || !dma_supported(dev, mask)) return -EIO; @@ -91,4 +102,43 @@ dma_set_mask(struct device *dev, u64 mask) return 0; } +static inline void *dma_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag, + struct dma_attrs *attrs) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + void *cpu_addr; + + cpu_addr = dma_ops->alloc(dev, size, dma_handle, flag, attrs); + + debug_dma_alloc_coherent(dev, size, *dma_handle, cpu_addr); + + return cpu_addr; +} + +static inline void dma_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle, + struct dma_attrs *attrs) +{ + struct dma_map_ops *dma_ops = get_dma_ops(dev); + + debug_dma_free_coherent(dev, size, cpu_addr, dma_handle); + + dma_ops->free(dev, size, cpu_addr, dma_handle, attrs); +} + +#define dma_alloc_coherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL) +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_attrs(d, s, h, f, NULL) +#define dma_free_coherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL) +#define dma_free_noncoherent(d, s, v, h) dma_free_attrs(d, s, v, h, NULL) + +/* + * dma_alloc_noncoherent() is #defined to return coherent memory, + * so there's no need to do any flushing here. + */ +static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ +} + #endif /* _ASM_TILE_DMA_MAPPING_H */ diff --git a/arch/tile/include/asm/fixmap.h b/arch/tile/include/asm/fixmap.h index c66f7933beaa..e16dbf929cb5 100644 --- a/arch/tile/include/asm/fixmap.h +++ b/arch/tile/include/asm/fixmap.h @@ -45,15 +45,23 @@ * * TLB entries of such buffers will not be flushed across * task switches. - * - * We don't bother with a FIX_HOLE since above the fixmaps - * is unmapped memory in any case. */ enum fixed_addresses { +#ifdef __tilegx__ + /* + * TILEPro has unmapped memory above so the hole isn't needed, + * and in any case the hole pushes us over a single 16MB pmd. + */ + FIX_HOLE, +#endif #ifdef CONFIG_HIGHMEM FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, #endif +#ifdef __tilegx__ /* see homecache.c */ + FIX_HOMECACHE_BEGIN, + FIX_HOMECACHE_END = FIX_HOMECACHE_BEGIN+(NR_CPUS)-1, +#endif __end_of_permanent_fixed_addresses, /* diff --git a/arch/tile/include/asm/homecache.h b/arch/tile/include/asm/homecache.h index a8243865d49e..7b7771328642 100644 --- a/arch/tile/include/asm/homecache.h +++ b/arch/tile/include/asm/homecache.h @@ -79,10 +79,17 @@ extern void homecache_change_page_home(struct page *, int order, int home); /* * Flush a page out of whatever cache(s) it is in. * This is more than just finv, since it properly handles waiting - * for the data to reach memory on tilepro, but it can be quite - * heavyweight, particularly on hash-for-home memory. + * for the data to reach memory, but it can be quite + * heavyweight, particularly on incoherent or immutable memory. */ -extern void homecache_flush_cache(struct page *, int order); +extern void homecache_finv_page(struct page *); + +/* + * Flush a page out of the specified home cache. + * Note that the specified home need not be the actual home of the page, + * as for example might be the case when coordinating with I/O devices. + */ +extern void homecache_finv_map_page(struct page *, int home); /* * Allocate a page with the given GFP flags, home, and optionally @@ -104,10 +111,10 @@ extern struct page *homecache_alloc_pages_node(int nid, gfp_t gfp_mask, * routines use homecache_change_page_home() to reset the home * back to the default before returning the page to the allocator. */ +void __homecache_free_pages(struct page *, unsigned int order); void homecache_free_pages(unsigned long addr, unsigned int order); -#define homecache_free_page(page) \ - homecache_free_pages((page), 0) - +#define __homecache_free_page(page) __homecache_free_pages((page), 0) +#define homecache_free_page(page) homecache_free_pages((page), 0) /* diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index d2152deb1f3c..2a9b293fece6 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -62,6 +62,92 @@ extern void iounmap(volatile void __iomem *addr); #define mm_ptov(addr) ((void *)phys_to_virt(addr)) #define mm_vtop(addr) ((unsigned long)virt_to_phys(addr)) +#if CHIP_HAS_MMIO() + +/* + * We use inline assembly to guarantee that the compiler does not + * split an access into multiple byte-sized accesses as it might + * sometimes do if a register data structure is marked "packed". + * Obviously on tile we can't tolerate such an access being + * actually unaligned, but we want to avoid the case where the + * compiler conservatively would generate multiple accesses even + * for an aligned read or write. + */ + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + return *(const volatile u8 __force *)addr; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 ret; + asm volatile("ld2u %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le16_to_cpu(ret); +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 ret; + /* Sign-extend to conform to u32 ABI sign-extension convention. */ + asm volatile("ld4s %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le32_to_cpu(ret); +} + +static inline u64 __raw_readq(const volatile void __iomem *addr) +{ + u64 ret; + asm volatile("ld %0, %1" : "=r" (ret) : "r" (addr)); + barrier(); + return le64_to_cpu(ret); +} + +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + *(volatile u8 __force *)addr = val; +} + +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("st2 %0, %1" :: "r" (addr), "r" (cpu_to_le16(val))); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("st4 %0, %1" :: "r" (addr), "r" (cpu_to_le32(val))); +} + +static inline void __raw_writeq(u64 val, volatile void __iomem *addr) +{ + asm volatile("st %0, %1" :: "r" (addr), "r" (cpu_to_le64(val))); +} + +/* + * The on-chip I/O hardware on tilegx is configured with VA=PA for the + * kernel's PA range. The low-level APIs and field names use "va" and + * "void *" nomenclature, to be consistent with the general notion + * that the addresses in question are virtualizable, but in the kernel + * context we are actually manipulating PA values. (In other contexts, + * e.g. access from user space, we do in fact use real virtual addresses + * in the va fields.) To allow readers of the code to understand what's + * happening, we direct their attention to this comment by using the + * following two functions that just duplicate __va() and __pa(). + */ +typedef unsigned long tile_io_addr_t; +static inline tile_io_addr_t va_to_tile_io_addr(void *va) +{ + BUILD_BUG_ON(sizeof(phys_addr_t) != sizeof(tile_io_addr_t)); + return __pa(va); +} +static inline void *tile_io_addr_to_va(tile_io_addr_t tile_io_addr) +{ + return __va(tile_io_addr); +} + +#else /* CHIP_HAS_MMIO() */ + #ifdef CONFIG_PCI extern u8 _tile_readb(unsigned long addr); @@ -73,10 +159,19 @@ extern void _tile_writew(u16 val, unsigned long addr); extern void _tile_writel(u32 val, unsigned long addr); extern void _tile_writeq(u64 val, unsigned long addr); -#else +#define __raw_readb(addr) _tile_readb((unsigned long)addr) +#define __raw_readw(addr) _tile_readw((unsigned long)addr) +#define __raw_readl(addr) _tile_readl((unsigned long)addr) +#define __raw_readq(addr) _tile_readq((unsigned long)addr) +#define __raw_writeb(val, addr) _tile_writeb(val, (unsigned long)addr) +#define __raw_writew(val, addr) _tile_writew(val, (unsigned long)addr) +#define __raw_writel(val, addr) _tile_writel(val, (unsigned long)addr) +#define __raw_writeq(val, addr) _tile_writeq(val, (unsigned long)addr) + +#else /* CONFIG_PCI */ /* - * The Tile architecture does not support IOMEM unless PCI is enabled. + * The tilepro architecture does not support IOMEM unless PCI is enabled. * Unfortunately we can't yet simply not declare these methods, * since some generic code that compiles into the kernel, but * we never run, uses them unconditionally. @@ -88,65 +183,58 @@ static inline int iomem_panic(void) return 0; } -static inline u8 _tile_readb(unsigned long addr) +static inline u8 readb(unsigned long addr) { return iomem_panic(); } -static inline u16 _tile_readw(unsigned long addr) +static inline u16 _readw(unsigned long addr) { return iomem_panic(); } -static inline u32 _tile_readl(unsigned long addr) +static inline u32 readl(unsigned long addr) { return iomem_panic(); } -static inline u64 _tile_readq(unsigned long addr) +static inline u64 readq(unsigned long addr) { return iomem_panic(); } -static inline void _tile_writeb(u8 val, unsigned long addr) +static inline void writeb(u8 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writew(u16 val, unsigned long addr) +static inline void writew(u16 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writel(u32 val, unsigned long addr) +static inline void writel(u32 val, unsigned long addr) { iomem_panic(); } -static inline void _tile_writeq(u64 val, unsigned long addr) +static inline void writeq(u64 val, unsigned long addr) { iomem_panic(); } -#endif +#endif /* CONFIG_PCI */ + +#endif /* CHIP_HAS_MMIO() */ -#define readb(addr) _tile_readb((unsigned long)addr) -#define readw(addr) _tile_readw((unsigned long)addr) -#define readl(addr) _tile_readl((unsigned long)addr) -#define readq(addr) _tile_readq((unsigned long)addr) -#define writeb(val, addr) _tile_writeb(val, (unsigned long)addr) -#define writew(val, addr) _tile_writew(val, (unsigned long)addr) -#define writel(val, addr) _tile_writel(val, (unsigned long)addr) -#define writeq(val, addr) _tile_writeq(val, (unsigned long)addr) - -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq +#define readb __raw_readb +#define readw __raw_readw +#define readl __raw_readl +#define readq __raw_readq +#define writeb __raw_writeb +#define writew __raw_writew +#define writel __raw_writel +#define writeq __raw_writeq #define readb_relaxed readb #define readw_relaxed readw diff --git a/arch/tile/include/asm/memprof.h b/arch/tile/include/asm/memprof.h deleted file mode 100644 index 359949be28c1..000000000000 --- a/arch/tile/include/asm/memprof.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Copyright 2010 Tilera Corporation. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, version 2. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or - * NON INFRINGEMENT. See the GNU General Public License for - * more details. - * - * The hypervisor's memory controller profiling infrastructure allows - * the programmer to find out what fraction of the available memory - * bandwidth is being consumed at each memory controller. The - * profiler provides start, stop, and clear operations to allows - * profiling over a specific time window, as well as an interface for - * reading the most recent profile values. - * - * This header declares IOCTL codes necessary to control memprof. - */ -#ifndef _ASM_TILE_MEMPROF_H -#define _ASM_TILE_MEMPROF_H - -#include <linux/ioctl.h> - -#define MEMPROF_IOCTL_TYPE 0xB4 -#define MEMPROF_IOCTL_START _IO(MEMPROF_IOCTL_TYPE, 0) -#define MEMPROF_IOCTL_STOP _IO(MEMPROF_IOCTL_TYPE, 1) -#define MEMPROF_IOCTL_CLEAR _IO(MEMPROF_IOCTL_TYPE, 2) - -#endif /* _ASM_TILE_MEMPROF_H */ diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h index 9d9131e5c552..dd033a4fd627 100644 --- a/arch/tile/include/asm/page.h +++ b/arch/tile/include/asm/page.h @@ -174,7 +174,9 @@ static inline __attribute_const__ int get_order(unsigned long size) #define MEM_LOW_END (HALF_VA_SPACE - 1) /* low half */ #define MEM_HIGH_START (-HALF_VA_SPACE) /* high half */ #define PAGE_OFFSET MEM_HIGH_START -#define _VMALLOC_START _AC(0xfffffff500000000, UL) /* 4 GB */ +#define FIXADDR_BASE _AC(0xfffffff400000000, UL) /* 4 GB */ +#define FIXADDR_TOP _AC(0xfffffff500000000, UL) /* 4 GB */ +#define _VMALLOC_START FIXADDR_TOP #define HUGE_VMAP_BASE _AC(0xfffffff600000000, UL) /* 4 GB */ #define MEM_SV_START _AC(0xfffffff700000000, UL) /* 256 MB */ #define MEM_SV_INTRPT MEM_SV_START @@ -185,9 +187,6 @@ static inline __attribute_const__ int get_order(unsigned long size) /* Highest DTLB address we will use */ #define KERNEL_HIGH_VADDR MEM_SV_START -/* Since we don't currently provide any fixmaps, we use an impossible VA. */ -#define FIXADDR_TOP MEM_HV_START - #else /* !__tilegx__ */ /* diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 32e6cbe8dff3..302cdf71ceed 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -15,9 +15,13 @@ #ifndef _ASM_TILE_PCI_H #define _ASM_TILE_PCI_H +#include <linux/dma-mapping.h> #include <linux/pci.h> +#include <linux/numa.h> #include <asm-generic/pci_iomap.h> +#ifndef __tilegx__ + /* * Structure of a PCI controller (host bridge) */ @@ -41,21 +45,151 @@ struct pci_controller { }; /* + * This flag tells if the platform is TILEmpower that needs + * special configuration for the PLX switch chip. + */ +extern int tile_plx_gen1; + +static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} + +#define TILE_NUM_PCIE 2 + +/* * The hypervisor maps the entirety of CPA-space as bus addresses, so * bus addresses are physical addresses. The networking and block * device layers use this boolean for bounce buffer decisions. */ #define PCI_DMA_BUS_IS_PHYS 1 +/* generic pci stuff */ +#include <asm-generic/pci.h> + +#else + +#include <asm/page.h> +#include <gxio/trio.h> + +/** + * We reserve the hugepage-size address range at the top of the 64-bit address + * space to serve as the PCI window, emulating the BAR0 space of an endpoint + * device. This window is used by the chip-to-chip applications running on + * the RC node. The reason for carving out this window is that Mem-Maps that + * back up this window will not overlap with those that map the real physical + * memory. + */ +#define PCIE_HOST_BAR0_SIZE HPAGE_SIZE +#define PCIE_HOST_BAR0_START HPAGE_MASK + +/** + * The first PAGE_SIZE of the above "BAR" window is mapped to the + * gxpci_host_regs structure. + */ +#define PCIE_HOST_REGS_SIZE PAGE_SIZE + +/* + * This is the PCI address where the Mem-Map interrupt regions start. + * We use the 2nd to the last huge page of the 64-bit address space. + * The last huge page is used for the rootcomplex "bar", for C2C purpose. + */ +#define MEM_MAP_INTR_REGIONS_BASE (HPAGE_MASK - HPAGE_SIZE) + +/* + * Each Mem-Map interrupt region occupies 4KB. + */ +#define MEM_MAP_INTR_REGION_SIZE (1 << TRIO_MAP_MEM_LIM__ADDR_SHIFT) + +/* + * Allocate the PCI BAR window right below 4GB. + */ +#define TILE_PCI_BAR_WINDOW_TOP (1ULL << 32) + +/* + * Allocate 1GB for the PCI BAR window. + */ +#define TILE_PCI_BAR_WINDOW_SIZE (1 << 30) + +/* + * This is the highest bus address targeting the host memory that + * can be generated by legacy PCI devices with 32-bit or less + * DMA capability, dictated by the BAR window size and location. + */ +#define TILE_PCI_MAX_DIRECT_DMA_ADDRESS \ + (TILE_PCI_BAR_WINDOW_TOP - TILE_PCI_BAR_WINDOW_SIZE - 1) + +/* + * We shift the PCI bus range for all the physical memory up by the whole PA + * range. The corresponding CPA of an incoming PCI request will be the PCI + * address minus TILE_PCI_MEM_MAP_BASE_OFFSET. This also implies + * that the 64-bit capable devices will be given DMA addresses as + * the CPA plus TILE_PCI_MEM_MAP_BASE_OFFSET. To support 32-bit + * devices, we create a separate map region that handles the low + * 4GB. + */ +#define TILE_PCI_MEM_MAP_BASE_OFFSET (1ULL << CHIP_PA_WIDTH()) + +/* + * Start of the PCI memory resource, which starts at the end of the + * maximum system physical RAM address. + */ +#define TILE_PCI_MEM_START (1ULL << CHIP_PA_WIDTH()) + +/* + * Structure of a PCI controller (host bridge) on Gx. + */ +struct pci_controller { + + /* Pointer back to the TRIO that this PCIe port is connected to. */ + gxio_trio_context_t *trio; + int mac; /* PCIe mac index on the TRIO shim */ + int trio_index; /* Index of TRIO shim that contains the MAC. */ + + int pio_mem_index; /* PIO region index for memory access */ + + /* + * Mem-Map regions for all the memory controllers so that Linux can + * map all of its physical memory space to the PCI bus. + */ + int mem_maps[MAX_NUMNODES]; + + int index; /* PCI domain number */ + struct pci_bus *root_bus; + + /* PCI memory space resource for this controller. */ + struct resource mem_space; + char mem_space_name[32]; + + uint64_t mem_offset; /* cpu->bus memory mapping offset. */ + + int first_busno; + + struct pci_ops *ops; + + /* Table that maps the INTx numbers to Linux irq numbers. */ + int irq_intx_table[4]; + + /* Address ranges that are routed to this controller/bridge. */ + struct resource mem_resources[3]; +}; + +extern struct pci_controller pci_controllers[TILEGX_NUM_TRIO * TILEGX_TRIO_PCIES]; +extern gxio_trio_context_t trio_contexts[TILEGX_NUM_TRIO]; + +extern void pci_iounmap(struct pci_dev *dev, void __iomem *); + +/* + * The PCI address space does not equal the physical memory address + * space (we have an IOMMU). The IDE and SCSI device layers use this + * boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS 0 + +#endif /* __tilegx__ */ + int __init tile_pci_init(void); int __init pcibios_init(void); -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} - void __devinit pcibios_fixup_bus(struct pci_bus *bus); -#define TILE_NUM_PCIE 2 - #define pci_domain_nr(bus) (((struct pci_controller *)(bus)->sysdata)->index) /* @@ -79,19 +213,10 @@ static inline int pcibios_assign_all_busses(void) #define PCIBIOS_MIN_MEM 0 #define PCIBIOS_MIN_IO 0 -/* - * This flag tells if the platform is TILEmpower that needs - * special configuration for the PLX switch chip. - */ -extern int tile_plx_gen1; - /* Use any cpu for PCI. */ #define cpumask_of_pcibus(bus) cpu_online_mask /* implement the pci_ DMA API in terms of the generic device dma_ one */ #include <asm-generic/pci-dma-compat.h> -/* generic pci stuff */ -#include <asm-generic/pci.h> - #endif /* _ASM_TILE_PCI_H */ |