diff options
Diffstat (limited to 'arch/sparc64/kernel/entry.S')
| -rw-r--r-- | arch/sparc64/kernel/entry.S | 266 |
1 files changed, 163 insertions, 103 deletions
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 214cd0ebe832..cecdc0a7521f 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -21,6 +21,7 @@ #include <asm/visasm.h> #include <asm/estate.h> #include <asm/auxio.h> +#include <asm/sfafsr.h> #define curptr g6 @@ -690,9 +691,159 @@ netbsd_syscall: retl nop - .globl __do_data_access_exception - .globl __do_data_access_exception_tl1 -__do_data_access_exception_tl1: + /* We need to carefully read the error status, ACK + * the errors, prevent recursive traps, and pass the + * information on to C code for logging. + * + * We pass the AFAR in as-is, and we encode the status + * information as described in asm-sparc64/sfafsr.h + */ + .globl __spitfire_access_error +__spitfire_access_error: + /* Disable ESTATE error reporting so that we do not + * take recursive traps and RED state the processor. + */ + stxa %g0, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + mov UDBE_UE, %g1 + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + + /* __spitfire_cee_trap branches here with AFSR in %g4 and + * UDBE_CE in %g1. It only clears ESTATE_ERR_CE in the + * ESTATE Error Enable register. + */ +__spitfire_cee_trap_continue: + ldxa [%g0] ASI_AFAR, %g5 ! Get AFAR + + rdpr %tt, %g3 + and %g3, 0x1ff, %g3 ! Paranoia + sllx %g3, SFSTAT_TRAP_TYPE_SHIFT, %g3 + or %g4, %g3, %g4 + rdpr %tl, %g3 + cmp %g3, 1 + mov 1, %g3 + bleu %xcc, 1f + sllx %g3, SFSTAT_TL_GT_ONE_SHIFT, %g3 + + or %g4, %g3, %g4 + + /* Read in the UDB error register state, clearing the + * sticky error bits as-needed. We only clear them if + * the UE bit is set. Likewise, __spitfire_cee_trap + * below will only do so if the CE bit is set. + * + * NOTE: UltraSparc-I/II have high and low UDB error + * registers, corresponding to the two UDB units + * present on those chips. UltraSparc-IIi only + * has a single UDB, called "SDB" in the manual. + * For IIi the upper UDB register always reads + * as zero so for our purposes things will just + * work with the checks below. + */ +1: ldxa [%g0] ASI_UDBH_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBH_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + stxa %g3, [%g0] ASI_UDB_ERROR_W + membar #Sync + +1: mov 0x18, %g3 + ldxa [%g3] ASI_UDBL_ERROR_R, %g3 + and %g3, 0x3ff, %g7 ! Paranoia + sllx %g7, SFSTAT_UDBL_SHIFT, %g7 + or %g4, %g7, %g4 + andcc %g3, %g1, %g3 ! UDBE_UE or UDBE_CE + be,pn %xcc, 1f + nop + mov 0x18, %g7 + stxa %g3, [%g7] ASI_UDB_ERROR_W + membar #Sync + +1: /* Ok, now that we've latched the error state, + * clear the sticky bits in the AFSR. + */ + stxa %g4, [%g0] ASI_AFSR + membar #Sync + + rdpr %tl, %g2 + cmp %g2, 1 + rdpr %pil, %g2 + bleu,pt %xcc, 1f + wrpr %g0, 15, %pil + + ba,pt %xcc, etraptl1 + rd %pc, %g7 + + ba,pt %xcc, 2f + nop + +1: ba,pt %xcc, etrap_irq + rd %pc, %g7 + +2: mov %l4, %o1 + mov %l5, %o2 + call spitfire_access_error + add %sp, PTREGS_OFF, %o0 + ba,pt %xcc, rtrap + clr %l6 + + /* This is the trap handler entry point for ECC correctable + * errors. They are corrected, but we listen for the trap + * so that the event can be logged. + * + * Disrupting errors are either: + * 1) single-bit ECC errors during UDB reads to system + * memory + * 2) data parity errors during write-back events + * + * As far as I can make out from the manual, the CEE trap + * is only for correctable errors during memory read + * accesses by the front-end of the processor. + * + * The code below is only for trap level 1 CEE events, + * as it is the only situation where we can safely record + * and log. For trap level >1 we just clear the CE bit + * in the AFSR and return. + * + * This is just like __spiftire_access_error above, but it + * specifically handles correctable errors. If an + * uncorrectable error is indicated in the AFSR we + * will branch directly above to __spitfire_access_error + * to handle it instead. Uncorrectable therefore takes + * priority over correctable, and the error logging + * C code will notice this case by inspecting the + * trap type. + */ + .globl __spitfire_cee_trap +__spitfire_cee_trap: + ldxa [%g0] ASI_AFSR, %g4 ! Get AFSR + mov 1, %g3 + sllx %g3, SFAFSR_UE_SHIFT, %g3 + andcc %g4, %g3, %g0 ! Check for UE + bne,pn %xcc, __spitfire_access_error + nop + + /* Ok, in this case we only have a correctable error. + * Indicate we only wish to capture that state in register + * %g1, and we only disable CE error reporting unlike UE + * handling which disables all errors. + */ + ldxa [%g0] ASI_ESTATE_ERROR_EN, %g3 + andn %g3, ESTATE_ERR_CE, %g3 + stxa %g3, [%g0] ASI_ESTATE_ERROR_EN + membar #Sync + + /* Preserve AFSR in %g4, indicate UDB state to capture in %g1 */ + ba,pt %xcc, __spitfire_cee_trap_continue + mov UDBE_CE, %g1 + + .globl __spitfire_data_access_exception + .globl __spitfire_data_access_exception_tl1 +__spitfire_data_access_exception_tl1: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -714,12 +865,12 @@ __do_data_access_exception_tl1: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call data_access_exception_tl1 + call spitfire_data_access_exception_tl1 add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 -__do_data_access_exception: +__spitfire_data_access_exception: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -733,14 +884,14 @@ __do_data_access_exception: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call data_access_exception + call spitfire_data_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - .globl __do_instruction_access_exception - .globl __do_instruction_access_exception_tl1 -__do_instruction_access_exception_tl1: + .globl __spitfire_insn_access_exception + .globl __spitfire_insn_access_exception_tl1 +__spitfire_insn_access_exception_tl1: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -753,12 +904,12 @@ __do_instruction_access_exception_tl1: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call instruction_access_exception_tl1 + call spitfire_insn_access_exception_tl1 add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 -__do_instruction_access_exception: +__spitfire_insn_access_exception: rdpr %pstate, %g4 wrpr %g4, PSTATE_MG|PSTATE_AG, %pstate mov TLB_SFSR, %g3 @@ -771,102 +922,11 @@ __do_instruction_access_exception: 109: or %g7, %lo(109b), %g7 mov %l4, %o1 mov %l5, %o2 - call instruction_access_exception + call spitfire_insn_access_exception add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - /* This is the trap handler entry point for ECC correctable - * errors. They are corrected, but we listen for the trap - * so that the event can be logged. - * - * Disrupting errors are either: - * 1) single-bit ECC errors during UDB reads to system - * memory - * 2) data parity errors during write-back events - * - * As far as I can make out from the manual, the CEE trap - * is only for correctable errors during memory read - * accesses by the front-end of the processor. - * - * The code below is only for trap level 1 CEE events, - * as it is the only situation where we can safely record - * and log. For trap level >1 we just clear the CE bit - * in the AFSR and return. - */ - - /* Our trap handling infrastructure allows us to preserve - * two 64-bit values during etrap for arguments to - * subsequent C code. Therefore we encode the information - * as follows: - * - * value 1) Full 64-bits of AFAR - * value 2) Low 33-bits of AFSR, then bits 33-->42 - * are UDBL error status and bits 43-->52 - * are UDBH error status - */ - .align 64 - .globl cee_trap -cee_trap: - ldxa [%g0] ASI_AFSR, %g1 ! Read AFSR - ldxa [%g0] ASI_AFAR, %g2 ! Read AFAR - sllx %g1, 31, %g1 ! Clear reserved bits - srlx %g1, 31, %g1 ! in AFSR - - /* NOTE: UltraSparc-I/II have high and low UDB error - * registers, corresponding to the two UDB units - * present on those chips. UltraSparc-IIi only - * has a single UDB, called "SDB" in the manual. - * For IIi the upper UDB register always reads - * as zero so for our purposes things will just - * work with the checks below. - */ - ldxa [%g0] ASI_UDBL_ERROR_R, %g3 ! Read UDB-Low error status - andcc %g3, (1 << 8), %g4 ! Check CE bit - sllx %g3, (64 - 10), %g3 ! Clear reserved bits - srlx %g3, (64 - 10), %g3 ! in UDB-Low error status - - sllx %g3, (33 + 0), %g3 ! Shift up to encoding area - or %g1, %g3, %g1 ! Or it in - be,pn %xcc, 1f ! Branch if CE bit was clear - nop - stxa %g4, [%g0] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBL - membar #Sync ! Synchronize ASI stores -1: mov 0x18, %g5 ! Addr of UDB-High error status - ldxa [%g5] ASI_UDBH_ERROR_R, %g3 ! Read it - - andcc %g3, (1 << 8), %g4 ! Check CE bit - sllx %g3, (64 - 10), %g3 ! Clear reserved bits - srlx %g3, (64 - 10), %g3 ! in UDB-High error status - sllx %g3, (33 + 10), %g3 ! Shift up to encoding area - or %g1, %g3, %g1 ! Or it in - be,pn %xcc, 1f ! Branch if CE bit was clear - nop - nop - - stxa %g4, [%g5] ASI_UDB_ERROR_W ! Clear CE sticky bit in UDBH - membar #Sync ! Synchronize ASI stores -1: mov 1, %g5 ! AFSR CE bit is - sllx %g5, 20, %g5 ! bit 20 - stxa %g5, [%g0] ASI_AFSR ! Clear CE sticky bit in AFSR - membar #Sync ! Synchronize ASI stores - sllx %g2, (64 - 41), %g2 ! Clear reserved bits - srlx %g2, (64 - 41), %g2 ! in latched AFAR - - andn %g2, 0x0f, %g2 ! Finish resv bit clearing - mov %g1, %g4 ! Move AFSR+UDB* into save reg - mov %g2, %g5 ! Move AFAR into save reg - rdpr %pil, %g2 - wrpr %g0, 15, %pil - ba,pt %xcc, etrap_irq - rd %pc, %g7 - mov %l4, %o0 - - mov %l5, %o1 - call cee_log - add %sp, PTREGS_OFF, %o2 - ba,a,pt %xcc, rtrap_irq - /* Capture I/D/E-cache state into per-cpu error scoreboard. * * %g1: (TL>=0) ? 1 : 0 |