diff options
Diffstat (limited to 'arch/sparc64/kernel/entry.S')
| -rw-r--r-- | arch/sparc64/kernel/entry.S | 180 |
1 files changed, 18 insertions, 162 deletions
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index b48349527853..2879b1072921 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -30,159 +30,6 @@ .text .align 32 - .globl sparc64_vpte_patchme1 - .globl sparc64_vpte_patchme2 -/* - * On a second level vpte miss, check whether the original fault is to the OBP - * range (note that this is only possible for instruction miss, data misses to - * obp range do not use vpte). If so, go back directly to the faulting address. - * This is because we want to read the tpc, otherwise we have no way of knowing - * the 8k aligned faulting address if we are using >8k kernel pagesize. This - * also ensures no vpte range addresses are dropped into tlb while obp is - * executing (see inherit_locked_prom_mappings() rant). - */ -sparc64_vpte_nucleus: - /* Note that kvmap below has verified that the address is - * in the range MODULES_VADDR --> VMALLOC_END already. So - * here we need only check if it is an OBP address or not. - */ - sethi %hi(LOW_OBP_ADDRESS), %g5 - cmp %g4, %g5 - blu,pn %xcc, sparc64_vpte_patchme1 - mov 0x1, %g5 - sllx %g5, 32, %g5 - cmp %g4, %g5 - blu,pn %xcc, obp_iaddr_patch - nop - - /* These two instructions are patched by paginig_init(). */ -sparc64_vpte_patchme1: - sethi %hi(0), %g5 -sparc64_vpte_patchme2: - or %g5, %lo(0), %g5 - - /* With kernel PGD in %g5, branch back into dtlb_backend. */ - ba,pt %xcc, sparc64_kpte_continue - andn %g1, 0x3, %g1 /* Finish PMD offset adjustment. */ - -vpte_noent: - /* Restore previous TAG_ACCESS, %g5 is zero, and we will - * skip over the trap instruction so that the top level - * TLB miss handler will thing this %g5 value is just an - * invalid PTE, thus branching to full fault processing. - */ - mov TLB_SFSR, %g1 - stxa %g4, [%g1 + %g1] ASI_DMMU - done - - .globl obp_iaddr_patch -obp_iaddr_patch: - /* These two instructions patched by inherit_prom_mappings(). */ - sethi %hi(0), %g5 - or %g5, %lo(0), %g5 - - /* Behave as if we are at TL0. */ - wrpr %g0, 1, %tl - rdpr %tpc, %g4 /* Find original faulting iaddr */ - srlx %g4, 13, %g4 /* Throw out context bits */ - sllx %g4, 13, %g4 /* g4 has vpn + ctx0 now */ - - /* Restore previous TAG_ACCESS. */ - mov TLB_SFSR, %g1 - stxa %g4, [%g1 + %g1] ASI_IMMU - - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop - - /* TLB load and return from trap. */ - stxa %g5, [%g0] ASI_ITLB_DATA_IN - retry - - .globl obp_daddr_patch -obp_daddr_patch: - /* These two instructions patched by inherit_prom_mappings(). */ - sethi %hi(0), %g5 - or %g5, %lo(0), %g5 - - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop - - /* TLB load and return from trap. */ - stxa %g5, [%g0] ASI_DTLB_DATA_IN - retry - -/* - * On a first level data miss, check whether this is to the OBP range (note - * that such accesses can be made by prom, as well as by kernel using - * prom_getproperty on "address"), and if so, do not use vpte access ... - * rather, use information saved during inherit_prom_mappings() using 8k - * pagesize. - */ - .align 32 -kvmap: - sethi %hi(MODULES_VADDR), %g5 - cmp %g4, %g5 - blu,pn %xcc, longpath - mov (VMALLOC_END >> 24), %g5 - sllx %g5, 24, %g5 - cmp %g4, %g5 - bgeu,pn %xcc, longpath - nop - -kvmap_check_obp: - sethi %hi(LOW_OBP_ADDRESS), %g5 - cmp %g4, %g5 - blu,pn %xcc, kvmap_vmalloc_addr - mov 0x1, %g5 - sllx %g5, 32, %g5 - cmp %g4, %g5 - blu,pn %xcc, obp_daddr_patch - nop - -kvmap_vmalloc_addr: - /* If we get here, a vmalloc addr was accessed, load kernel VPTE. */ - ldxa [%g3 + %g6] ASI_N, %g5 - brgez,pn %g5, longpath - nop - - /* PTE is valid, load into TLB and return from trap. */ - stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB - retry - /* This is trivial with the new code... */ .globl do_fpdis do_fpdis: @@ -525,14 +372,13 @@ cheetah_plus_patch_fpdis: * * DATA 0: [low 32-bits] Address of function to call, jmp to this * [high 32-bits] MMU Context Argument 0, place in %g5 - * DATA 1: Address Argument 1, place in %g6 + * DATA 1: Address Argument 1, place in %g1 * DATA 2: Address Argument 2, place in %g7 * * With this method we can do most of the cross-call tlb/cache * flushing very quickly. * - * Current CPU's IRQ worklist table is locked into %g1, - * don't touch. + * Current CPU's IRQ worklist table is locked into %g6, don't touch. */ .text .align 32 @@ -1006,13 +852,14 @@ cheetah_plus_dcpe_trap_vector: nop do_cheetah_plus_data_parity: - ba,pt %xcc, etrap + rdpr %pil, %g2 + wrpr %g0, 15, %pil + ba,pt %xcc, etrap_irq rd %pc, %g7 mov 0x0, %o0 call cheetah_plus_parity_error add %sp, PTREGS_OFF, %o1 - ba,pt %xcc, rtrap - clr %l6 + ba,a,pt %xcc, rtrap_irq cheetah_plus_dcpe_trap_vector_tl1: membar #Sync @@ -1036,13 +883,14 @@ cheetah_plus_icpe_trap_vector: nop do_cheetah_plus_insn_parity: - ba,pt %xcc, etrap + rdpr %pil, %g2 + wrpr %g0, 15, %pil + ba,pt %xcc, etrap_irq rd %pc, %g7 mov 0x1, %o0 call cheetah_plus_parity_error add %sp, PTREGS_OFF, %o1 - ba,pt %xcc, rtrap - clr %l6 + ba,a,pt %xcc, rtrap_irq cheetah_plus_icpe_trap_vector_tl1: membar #Sync @@ -1075,6 +923,10 @@ do_dcpe_tl1: nop wrpr %g1, %tl ! Restore original trap level do_dcpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */ + sethi %hi(dcache_parity_tl1_occurred), %g2 + lduw [%g2 + %lo(dcache_parity_tl1_occurred)], %g1 + add %g1, 1, %g1 + stw %g1, [%g2 + %lo(dcache_parity_tl1_occurred)] /* Reset D-cache parity */ sethi %hi(1 << 16), %g1 ! D-cache size mov (1 << 5), %g2 ! D-cache line size @@ -1121,6 +973,10 @@ do_icpe_tl1: nop wrpr %g1, %tl ! Restore original trap level do_icpe_tl1_nonfatal: /* Ok we may use interrupt globals safely. */ + sethi %hi(icache_parity_tl1_occurred), %g2 + lduw [%g2 + %lo(icache_parity_tl1_occurred)], %g1 + add %g1, 1, %g1 + stw %g1, [%g2 + %lo(icache_parity_tl1_occurred)] /* Flush I-cache */ sethi %hi(1 << 15), %g1 ! I-cache size mov (1 << 5), %g2 ! I-cache line size |