diff options
Diffstat (limited to 'arch/sh/include/mach-common')
| -rw-r--r-- | arch/sh/include/mach-common/mach/edosk7705.h | 30 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/highlander.h | 198 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/hp6xx.h | 58 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/lboxre2.h | 27 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/magicpanelr2.h | 67 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/microdev.h | 80 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/migor.h | 64 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/r2d.h | 70 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/sdk7780.h | 81 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/sh7763rdp.h | 54 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/sh7785lcr.h | 55 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/shmin.h | 9 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/snapgear.h | 71 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/systemh7751.h | 71 | ||||
| -rw-r--r-- | arch/sh/include/mach-common/mach/titan.h | 17 |
15 files changed, 952 insertions, 0 deletions
diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h new file mode 100644 index 000000000000..5bdc9d9be3de --- /dev/null +++ b/arch/sh/include/mach-common/mach/edosk7705.h @@ -0,0 +1,30 @@ +/* + * include/asm-sh/edosk7705.h + * + * Modified version of io_se.h for the EDOSK7705 specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an Hitachi EDOSK7705 development board + */ + +#ifndef __ASM_SH_EDOSK7705_IO_H +#define __ASM_SH_EDOSK7705_IO_H + +#include <asm/io_generic.h> + +extern unsigned char sh_edosk7705_inb(unsigned long port); +extern unsigned int sh_edosk7705_inl(unsigned long port); + +extern void sh_edosk7705_outb(unsigned char value, unsigned long port); +extern void sh_edosk7705_outl(unsigned int value, unsigned long port); + +extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); +extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); + +#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h new file mode 100644 index 000000000000..306f7359f7d4 --- /dev/null +++ b/arch/sh/include/mach-common/mach/highlander.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7780RP) +#define PA_POFF (-1) + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7785RP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_PCISCR (PA_BCR+0x0000) +#define PA_IRLPRA (PA_BCR+0x0002) +#define PA_IRLPRB (PA_BCR+0x0004) +#define PA_IRLPRC (PA_BCR+0x0006) +#define PA_IRLPRD (PA_BCR+0x0008) +#define IRLCNTR1 (PA_BCR+0x0010) +#define PA_IRLPRE (PA_BCR+0x000a) +#define PA_IRLPRF (PA_BCR+0x000c) +#define PA_EXIRLCR (PA_BCR+0x000e) +#define PA_IRLMCR1 (PA_BCR+0x0010) +#define PA_IRLMCR2 (PA_BCR+0x0012) +#define PA_IRLSSR1 (PA_BCR+0x0014) +#define PA_IRLSSR2 (PA_BCR+0x0016) +#define PA_CFTCR (PA_BCR+0x0100) +#define PA_CFPCR (PA_BCR+0x0102) +#define PA_PCICR (PA_BCR+0x0110) +#define PA_IVDRCTL (PA_BCR+0x0112) +#define PA_IVDRSR (PA_BCR+0x0114) +#define PA_PDRSTCR (PA_BCR+0x0116) +#define PA_POFF (PA_BCR+0x0120) +#define PA_LCDCR (PA_BCR+0x0130) +#define PA_TPCR (PA_BCR+0x0140) +#define PA_TPCKCR (PA_BCR+0x0142) +#define PA_TPRSTR (PA_BCR+0x0144) +#define PA_TPXPDR (PA_BCR+0x0146) +#define PA_TPYPDR (PA_BCR+0x0148) +#define PA_GPIOPFR (PA_BCR+0x0150) +#define PA_GPIODR (PA_BCR+0x0152) +#define PA_OBLED (PA_BCR+0x0154) +#define PA_SWSR (PA_BCR+0x0156) +#define PA_VERREG (PA_BCR+0x0158) +#define PA_SMCR (PA_BCR+0x0200) +#define PA_SMSMADR (PA_BCR+0x0202) +#define PA_SMMR (PA_BCR+0x0204) +#define PA_SMSADR1 (PA_BCR+0x0206) +#define PA_SMSADR32 (PA_BCR+0x0244) +#define PA_SMTRDR1 (PA_BCR+0x0246) +#define PA_SMTRDR16 (PA_BCR+0x0264) +#define PA_CU3MDR (PA_BCR+0x0300) +#define PA_CU5MDR (PA_BCR+0x0302) +#define PA_MMSR (PA_BCR+0x0400) + +#define IVDR_CK_ON 4 /* iVDR Clock ON */ +#endif + +#define HL_FPGA_IRQ_BASE 200 +#define HL_NR_IRL 15 + +#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) +#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) +#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) +#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) +#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) +#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) +#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) +#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) +#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) +#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) +#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) +#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) +#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) +#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) + +unsigned char *highlander_plat_irq_setup(void); + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/arch/sh/include/mach-common/mach/hp6xx.h b/arch/sh/include/mach-common/mach/hp6xx.h new file mode 100644 index 000000000000..0d4165a32dcd --- /dev/null +++ b/arch/sh/include/mach-common/mach/hp6xx.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_HP6XX_H +#define __ASM_SH_HP6XX_H + +/* + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ +#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ +#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ + +#define DAC_LCD_BRIGHTNESS 0 +#define DAC_SPEAKER_VOLUME 1 + +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + +#define PHDR_TS_PEN_DOWN 0x08 + +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + +#define SCPDR_TS_SCAN_ENABLE 0x20 +#define SCPDR_TS_SCAN_Y 0x02 +#define SCPDR_TS_SCAN_X 0x01 + +#define SCPCR_TS_ENABLE 0x405 +#define SCPCR_TS_MASK 0xc0f + +#define ADC_CHANNEL_TS_Y 1 +#define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 + +#define HD64461_GPADR_SPEAKER 0x01 +#define HD64461_GPADR_PCMCIA0 (0x02|0x08) + +#define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 +#define HD64461_GPBDR_LED_RED 0x80 + +#include <asm/hd64461.h> +#include <asm/io.h> + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +#endif /* __ASM_SH_HP6XX_H */ diff --git a/arch/sh/include/mach-common/mach/lboxre2.h b/arch/sh/include/mach-common/mach/lboxre2.h new file mode 100644 index 000000000000..e6d160504923 --- /dev/null +++ b/arch/sh/include/mach-common/mach/lboxre2.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_LBOXRE2_H +#define __ASM_SH_LBOXRE2_H + +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define IRQ_CF1 9 /* CF1 */ +#define IRQ_CF0 10 /* CF0 */ +#define IRQ_INTD 11 /* INTD */ +#define IRQ_ETH1 12 /* Ether1 */ +#define IRQ_ETH0 13 /* Ether0 */ +#define IRQ_INTA 14 /* INTA */ + +void init_lboxre2_IRQ(void); + +#define __IO_PREFIX lboxre2 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/arch/sh/include/mach-common/mach/magicpanelr2.h b/arch/sh/include/mach-common/mach/magicpanelr2.h new file mode 100644 index 000000000000..c644a77ee357 --- /dev/null +++ b/arch/sh/include/mach-common/mach/magicpanelr2.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/magicpanelr2.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * I/O addresses and bitmasks for Magic Panel Release 2 board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH_MAGICPANELR2_H +#define __ASM_SH_MAGICPANELR2_H + +#include <asm/gpio.h> + +#define __IO_PREFIX mpr2 +#include <asm/io_generic.h> + + +#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) +#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) +#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) +#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) +#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) +#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) + + +#define PA_LED PORT_PADR /* LED */ + + +/* BSC */ +#define CMNCR 0xA4FD0000UL +#define CS0BCR 0xA4FD0004UL +#define CS2BCR 0xA4FD0008UL +#define CS3BCR 0xA4FD000CUL +#define CS4BCR 0xA4FD0010UL +#define CS5ABCR 0xA4FD0014UL +#define CS5BBCR 0xA4FD0018UL +#define CS6ABCR 0xA4FD001CUL +#define CS6BBCR 0xA4FD0020UL +#define CS0WCR 0xA4FD0024UL +#define CS2WCR 0xA4FD0028UL +#define CS3WCR 0xA4FD002CUL +#define CS4WCR 0xA4FD0030UL +#define CS5AWCR 0xA4FD0034UL +#define CS5BWCR 0xA4FD0038UL +#define CS6AWCR 0xA4FD003CUL +#define CS6BWCR 0xA4FD0040UL + + +/* usb */ + +#define PORT_UTRCTL 0xA405012CUL +#define PORT_UCLKCR_W 0xA40A0008UL + +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR2 0xA4140012UL + +/* MTD */ + +#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL +#define MPR2_MTD_KERNEL_SIZE 0x00200000UL + +#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h new file mode 100644 index 000000000000..1aed15856e11 --- /dev/null +++ b/arch/sh/include/mach-common/mach/microdev.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-sh/microdev.h + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * Definitions for the SuperH SH4-202 MicroDev board. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#ifndef __ASM_SH_MICRODEV_H +#define __ASM_SH_MICRODEV_H + +extern void init_microdev_irq(void); +extern void microdev_print_fpga_intc_status(void); + +/* + * The following are useful macros for manipulating the interrupt + * controller (INTC) on the CPU-board FPGA. should be noted that there + * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - + * these are two different things, both of which need to be prorammed to + * correctly route - unfortunately, they have the same name and + * abbreviations! + */ +#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ +#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ +#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ + + +/* + * The following are the IRQ numbers for the Linux Kernel for external + * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. + */ +#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ +#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ +#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ +#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ +#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ + +/* + * The following are the IRQ numbers for the INTC on the FPGA for + * external interrupts. i.e. the bits in the INTC registers in the + * FPGA. + */ +#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ +#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ +#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ +#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ +#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ + +#define MICRODEV_IRQ_PCI_INTA 8 +#define MICRODEV_IRQ_PCI_INTB 9 +#define MICRODEV_IRQ_PCI_INTC 10 +#define MICRODEV_IRQ_PCI_INTD 11 + +#define __IO_PREFIX microdev +#include <asm/io_generic.h> + +#if defined(CONFIG_PCI) +unsigned char microdev_pci_inb(unsigned long port); +unsigned short microdev_pci_inw(unsigned long port); +unsigned long microdev_pci_inl(unsigned long port); +void microdev_pci_outb(unsigned char data, unsigned long port); +void microdev_pci_outw(unsigned short data, unsigned long port); +void microdev_pci_outl(unsigned long data, unsigned long port); +#endif + +#endif /* __ASM_SH_MICRODEV_H */ diff --git a/arch/sh/include/mach-common/mach/migor.h b/arch/sh/include/mach-common/mach/migor.h new file mode 100644 index 000000000000..e451f0229e00 --- /dev/null +++ b/arch/sh/include/mach-common/mach/migor.h @@ -0,0 +1,64 @@ +#ifndef __ASM_SH_MIGOR_H +#define __ASM_SH_MIGOR_H + +/* + * linux/include/asm-sh/migor.h + * + * Copyright (C) 2008 Renesas Solutions + * + * Portions Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* GPIO */ +#define PORT_PACR 0xa4050100 +#define PORT_PDCR 0xa4050106 +#define PORT_PECR 0xa4050108 +#define PORT_PHCR 0xa405010e +#define PORT_PJCR 0xa4050110 +#define PORT_PKCR 0xa4050112 +#define PORT_PLCR 0xa4050114 +#define PORT_PMCR 0xa4050116 +#define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 +#define PORT_PWCR 0xa4050146 +#define PORT_PXCR 0xa4050148 +#define PORT_PYCR 0xa405014a +#define PORT_PZCR 0xa405014c +#define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 +#define PORT_PWDR 0xa4050166 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRC 0xa405015c + +#define PORT_MSELCRB 0xa4050182 + +#define PORT_PSELA 0xa405014e +#define PORT_PSELB 0xa4050150 +#define PORT_PSELC 0xa4050152 +#define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRB 0xa405015a +#define PORT_HIZCRC 0xa405015c + +#define BSC_CS4BCR 0xfec10010 +#define BSC_CS6ABCR 0xfec1001c +#define BSC_CS4WCR 0xfec10030 + +#include <video/sh_mobile_lcdc.h> + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + +#endif /* __ASM_SH_MIGOR_H */ diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h new file mode 100644 index 000000000000..0a800157b826 --- /dev/null +++ b/arch/sh/include/mach-common/mach/r2d.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_RENESAS_RTS7751R2D_H +#define __ASM_SH_RENESAS_RTS7751R2D_H + +/* + * linux/include/asm-sh/renesas_rts7751r2d.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales RTS7751R2D support + */ + +/* Board specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ +#define PA_CFCTL 0xa4000004 /* CF Timing control */ +#define PA_CFPOW 0xa4000006 /* CF Power control */ +#define PA_DISPCTL 0xa4000008 /* Display Timing control */ +#define PA_SDMPOW 0xa400000a /* SD Power control */ +#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ +#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ + +#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ +#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ + +#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ +#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ + +#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ +#define PA_VERREG 0xa4000032 /* FPGA Version Register */ +#define PA_INPORT 0xa4000034 /* KEY Input Port control */ +#define PA_OUTPORT 0xa4000036 /* LED control */ +#define PA_BVERREG 0xa4000038 /* Board Revision Register */ + +#define PA_AX88796L 0xaa000400 /* AX88796L Area */ +#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define R2D_FPGA_IRQ_BASE 100 + +#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) +#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) +#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) +#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) +#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) +#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) +#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) +#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) +#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) +#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) +#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) +#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) +#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) +#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) + +/* arch/sh/boards/renesas/rts7751r2d/irq.c */ +void init_rts7751r2d_IRQ(void); +int rts7751r2d_irq_demux(int); + +#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/arch/sh/include/mach-common/mach/sdk7780.h b/arch/sh/include/mach-common/mach/sdk7780.h new file mode 100644 index 000000000000..697dc865f21b --- /dev/null +++ b/arch/sh/include/mach-common/mach/sdk7780.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_RENESAS_SDK7780_H +#define __ASM_SH_RENESAS_SDK7780_H + +/* + * linux/include/asm-sh/sdk7780.h + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa0800000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ + +#define PA_PERIPHERAL PA_AREA5_IO + +/* SRAM/Reserved */ +#define PA_RESERVED (PA_PERIPHERAL + 0) +/* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01000000) +/* SMC LAN91C111 */ +#define PA_LAN (PA_PERIPHERAL + 0x01800000) + + +#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ +#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ +#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ +#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ +#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ +#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ +#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ +#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ +#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ +#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ +#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ +#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ +#define PA_LED FPGA_SLEDR +#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ +#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ +#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ +#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ +#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ +#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ +#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ +#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ +#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ +#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ +#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ +#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ + + +#define SDK7780_NR_IRL 15 +/* IDE/ATA interrupt */ +#define IRQ_CFCARD 14 +/* SMC interrupt */ +#define IRQ_ETHERNET 6 + + +/* arch/sh/boards/renesas/sdk7780/irq.c */ +void init_sdk7780_IRQ(void); + +#define __IO_PREFIX sdk7780 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/arch/sh/include/mach-common/mach/sh7763rdp.h b/arch/sh/include/mach-common/mach/sh7763rdp.h new file mode 100644 index 000000000000..8750cc852977 --- /dev/null +++ b/arch/sh/include/mach-common/mach/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/arch/sh/include/mach-common/mach/sh7785lcr.h b/arch/sh/include/mach-common/mach/sh7785lcr.h new file mode 100644 index 000000000000..1ce27d5c7491 --- /dev/null +++ b/arch/sh/include/mach-common/mach/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + diff --git a/arch/sh/include/mach-common/mach/shmin.h b/arch/sh/include/mach-common/mach/shmin.h new file mode 100644 index 000000000000..36ba138a81fb --- /dev/null +++ b/arch/sh/include/mach-common/mach/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/snapgear.h new file mode 100644 index 000000000000..042d95f51c4d --- /dev/null +++ b/arch/sh/include/mach-common/mach/snapgear.h @@ -0,0 +1,71 @@ +/* + * include/asm-sh/snapgear.h + * + * Modified version of io_se.h for the snapgear-specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a SnapGear + */ + +#ifndef _ASM_SH_IO_SNAPGEAR_H +#define _ASM_SH_IO_SNAPGEAR_H + +#if defined(CONFIG_CPU_SH4) +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 + +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 + +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 + +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 +#endif + +#define __IO_PREFIX snapgear +#include <asm/io_generic.h> + +#ifdef CONFIG_SH_SECUREEDGE5410 +/* + * We need to remember what was written to the ioport as some bits + * are shared with other functions and you cannot read back what was + * written :-| + * + * Bit Read Write + * ----------------------------------------------- + * D0 DCD on ttySC1 power + * D1 Reset Switch heatbeat + * D2 ttySC0 CTS (7100) LAN + * D3 - WAN + * D4 ttySC0 DCD (7100) CONSOLE + * D5 - ONLINE + * D6 - VPN + * D7 - DTR on ttySC1 + * D8 - ttySC0 RTS (7100) + * D9 - ttySC0 DTR (7100) + * D10 - RTC SCLK + * D11 RTC DATA RTC DATA + * D12 - RTS RESET + */ + +#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) +extern unsigned short secureedge5410_ioport; + +#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) +#define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#endif + +#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/arch/sh/include/mach-common/mach/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h new file mode 100644 index 000000000000..4161122c84ef --- /dev/null +++ b/arch/sh/include/mach-common/mach/systemh7751.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H +#define __ASM_SH_SYSTEMH_7751SYSTEMH_H + +/* + * linux/include/asm-sh/systemh/7751systemh.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SystemH support + + * Modified for 7751 SystemH by + * Jonathan Short, 2002. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +#define __IO_PREFIX sh7751systemh +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/arch/sh/include/mach-common/mach/titan.h b/arch/sh/include/mach-common/mach/titan.h new file mode 100644 index 000000000000..03f3583c8918 --- /dev/null +++ b/arch/sh/include/mach-common/mach/titan.h @@ -0,0 +1,17 @@ +/* + * Platform defintions for Titan + */ +#ifndef _ASM_SH_TITAN_H +#define _ASM_SH_TITAN_H + +#define __IO_PREFIX titan +#include <asm/io_generic.h> + +/* IRQ assignments */ +#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ +#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ +#define TITAN_IRQ_MPCIA 8 /* mPCI A */ +#define TITAN_IRQ_MPCIB 11 /* mPCI B */ +#define TITAN_IRQ_USB 11 /* USB */ + +#endif /* __ASM_SH_TITAN_H */ |