summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards/mach-ecovec24/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c87
1 files changed, 65 insertions, 22 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 5c246289b4f0..39ed8722d11a 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -64,18 +64,16 @@
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
+
static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
.nr_bits = 4,
.bit_pos = led_pos,
};
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = 0xA405012C, /* PTG */
- .end = 0xA405012E - 1,
- .flags = IORESOURCE_MEM,
- },
+static struct resource heartbeat_resource = {
+ .start = 0xA405012C, /* PTG */
+ .end = 0xA405012E - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
};
static struct platform_device heartbeat_device = {
@@ -84,8 +82,8 @@ static struct platform_device heartbeat_device = {
.dev = {
.platform_data = &heartbeat_data,
},
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
+ .num_resources = 1,
+ .resource = &heartbeat_resource,
};
/* MTD */
@@ -455,7 +453,7 @@ static struct resource sdhi0_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 101,
+ .start = 100,
.flags = IORESOURCE_IRQ,
},
};
@@ -491,7 +489,7 @@ static struct resource sdhi1_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = 24,
+ .start = 23,
.flags = IORESOURCE_IRQ,
},
};
@@ -698,13 +696,13 @@ static struct platform_device camera_devices[] = {
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -753,6 +751,26 @@ static struct platform_device fsi_device = {
},
};
+/* IrDA */
+static struct resource irda_resources[] = {
+ [0] = {
+ .name = "IrDA",
+ .start = 0xA45D0000,
+ .end = 0xA45D0049,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 20,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device irda_device = {
+ .name = "sh_sir",
+ .num_resources = ARRAY_SIZE(irda_resources),
+ .resource = irda_resources,
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
@@ -773,8 +791,10 @@ static struct platform_device *ecovec_devices[] __initdata = {
&camera_devices[1],
&camera_devices[2],
&fsi_device,
+ &irda_device,
};
+#ifdef CONFIG_I2C
#define EEPROM_ADDR 0x50
static u8 mac_read(struct i2c_adapter *a, u8 command)
{
@@ -817,6 +837,12 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
msleep(10);
}
}
+#else
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
+{
+ pr_err("unable to read sh_eth MAC address\n");
+}
+#endif
#define PORT_HIZA 0xA4050158
#define IODRIVEA 0xA405018A
@@ -831,7 +857,8 @@ static int __init arch_setup(void)
struct clk *clk;
/* register board specific self-refresh code */
- sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
&ecovec24_sdram_enter_start,
&ecovec24_sdram_enter_end,
&ecovec24_sdram_leave_start,
@@ -855,7 +882,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTG1, 0);
gpio_direction_output(GPIO_PTG2, 0);
gpio_direction_output(GPIO_PTG3, 0);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
/* enable SH-Eth */
gpio_request(GPIO_PTA1, NULL);
@@ -875,16 +902,16 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LNKSTA, NULL);
/* enable USB */
- ctrl_outw(0x0000, 0xA4D80000);
- ctrl_outw(0x0000, 0xA4D90000);
+ __raw_writew(0x0000, 0xA4D80000);
+ __raw_writew(0x0000, 0xA4D90000);
gpio_request(GPIO_PTB3, NULL);
gpio_request(GPIO_PTB4, NULL);
gpio_request(GPIO_PTB5, NULL);
gpio_direction_input(GPIO_PTB3);
gpio_direction_output(GPIO_PTB4, 0);
gpio_direction_output(GPIO_PTB5, 0);
- ctrl_outw(0x0600, 0xa40501d4);
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa4050192);
if (gpio_get_value(GPIO_PTB3)) {
printk(KERN_INFO "USB1 function is selected\n");
@@ -925,7 +952,7 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
gpio_request(GPIO_PTE6, NULL);
gpio_request(GPIO_PTU1, NULL);
@@ -937,7 +964,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTA2, 0);
/* I/O buffer drive ability is high */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@@ -1069,7 +1096,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTB7, 0);
/* I/O buffer drive ability is high for SDHI1 */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
@@ -1107,6 +1134,11 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_FSIOBLRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+ /* set SPU2 clock to 83.4 MHz */
+ clk = clk_get(NULL, "spu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 83333333));
+ clk_put(clk);
+
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
clk_register(&fsimckb_clk);
@@ -1123,6 +1155,17 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_INTC_IRQ1, NULL);
gpio_direction_input(GPIO_FN_INTC_IRQ1);
+ /* set VPU clock to 166 MHz */
+ clk = clk_get(NULL, "vpu_clk");
+ clk_set_rate(clk, clk_round_rate(clk, 166000000));
+ clk_put(clk);
+
+ /* enable IrDA */
+ gpio_request(GPIO_FN_IRDA_OUT, NULL);
+ gpio_request(GPIO_FN_IRDA_IN, NULL);
+ gpio_request(GPIO_PTU5, NULL);
+ gpio_direction_output(GPIO_PTU5, 0);
+
/* enable I2C device */
i2c_register_board_info(0, i2c0_devices,
ARRAY_SIZE(i2c0_devices));