diff options
Diffstat (limited to 'arch/ppc')
53 files changed, 16 insertions, 14083 deletions
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 08e083d30dc6..db5934cdafb3 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -104,12 +104,6 @@ config 8xx bool "8xx" select PPC_LIB_RHEAP -config E200 - bool "e200" - -config E500 - bool "e500" - endchoice config PPC_FPU @@ -124,25 +118,14 @@ config PPC_DCR depends on PPC_DCR_NATIVE default y -config BOOKE - bool - depends on E200 || E500 - default y - -config FSL_BOOKE - bool - depends on E200 || E500 - default y - config PTE_64BIT bool - depends on 44x || E500 + depends on 44x default y if 44x - default y if E500 && PHYS_64BIT config PHYS_64BIT - bool 'Large physical address support' if E500 - depends on 44x || E500 + bool + depends on 44x default y if 44x ---help--- This option enables kernel support for larger than 32-bit physical @@ -167,21 +150,6 @@ config ALTIVEC If in doubt, say Y here. -config SPE - bool "SPE Support" - depends on E200 || E500 - ---help--- - This option enables kernel support for the Signal Processing - Extensions (SPE) to the PowerPC processor. The kernel currently - supports saving and restoring SPE registers, and turning on the - 'spe enable' bit so user processes can execute SPE instructions. - - This option is only useful if you have a processor that supports - SPE (e500, otherwise known as 85xx series), but does not have any - effect on a non-spe cpu (it does, however add code to the kernel). - - If in doubt, say Y here. - config TAU bool "Thermal Management Support" depends on 6xx && !8260 @@ -228,7 +196,7 @@ config TAU_AVERAGE config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E200 || E500 + depends on 4xx || 8xx ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the @@ -279,7 +247,6 @@ config PPC601_SYNC_FIX If in doubt, say Y here. source arch/ppc/platforms/4xx/Kconfig -source arch/ppc/platforms/85xx/Kconfig config PPC_STD_MMU bool @@ -288,7 +255,7 @@ config PPC_STD_MMU config NOT_COHERENT_CACHE bool - depends on 4xx || 8xx || E200 + depends on 4xx || 8xx default y endmenu @@ -1045,13 +1012,13 @@ config GENERIC_ISA_DMA config PPC_I8259 bool - default y if 85xx || PPC_PREP + default y if PPC_PREP default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx || PPC_PREP + default y if 40x || 44x || PPC_PREP default n config EISA @@ -1068,8 +1035,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || 85xx || PPC_MPC52xx - default y if !40x && !CPM2 && !8xx && !85xx + bool "PCI support" if 40x || CPM2 || PPC_MPC52xx + default y if !40x && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx help Find out whether your system includes a PCI bus. PCI is the name of diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index a4fef18075ff..8df7f0e4c3a6 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -36,14 +36,8 @@ LINUXINCLUDE += -Iarch/$(ARCH)/include CHECKFLAGS += -D__powerpc__ -ifndef CONFIG_FSL_BOOKE -KBUILD_CFLAGS += -mstring -endif - cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_E500) += -Wa,-me500 -cpu-as-$(CONFIG_E200) += -Wa,-me200 KBUILD_AFLAGS += $(cpu-as-y) KBUILD_CFLAGS += $(cpu-as-y) @@ -55,7 +49,6 @@ head-y := arch/ppc/kernel/head.o head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o -head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o @@ -65,7 +58,6 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ arch/ppc/syslib/ arch/powerpc/sysdev/ \ arch/powerpc/lib/ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ -core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig deleted file mode 100644 index f33f0e772dcb..000000000000 --- a/arch/ppc/configs/TQM8540_defconfig +++ /dev/null @@ -1,973 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Fri Nov 25 17:26:50 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_TQM8540=y -# CONFIG_TQM8541 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -CONFIG_MPC8540=y - -# -# Platform options -# -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig deleted file mode 100644 index e00cd62daa3f..000000000000 --- a/arch/ppc/configs/TQM8541_defconfig +++ /dev/null @@ -1,986 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Wed Nov 30 13:36:28 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -CONFIG_TQM8541=y -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -CONFIG_MPC8555=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_MPC8260 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_MAX6900 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8563 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig deleted file mode 100644 index 43a0d9df1e23..000000000000 --- a/arch/ppc/configs/TQM8555_defconfig +++ /dev/null @@ -1,983 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 17:10:52 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -CONFIG_TQM8555=y -# CONFIG_TQM8560 is not set -CONFIG_MPC8555=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig deleted file mode 100644 index a814d17a2be9..000000000000 --- a/arch/ppc/configs/TQM8560_defconfig +++ /dev/null @@ -1,992 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Wed Nov 30 16:47:53 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8555 is not set -CONFIG_TQM8560=y -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_MPC8260 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_MAX6900 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8563 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8540_ads_defconfig b/arch/ppc/configs/mpc8540_ads_defconfig deleted file mode 100644 index bf676ebd99ab..000000000000 --- a/arch/ppc/configs/mpc8540_ads_defconfig +++ /dev/null @@ -1,706 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:23:13 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -CONFIG_MPC8540_ADS=y -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -CONFIG_MPC8540=y - -# -# Platform options -# -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PC-card bridges -# - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig deleted file mode 100644 index f36fc5db540b..000000000000 --- a/arch/ppc/configs/mpc8548_cds_defconfig +++ /dev/null @@ -1,658 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 24 22:36:27 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -CONFIG_MPC8548_CDS=y -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8548=y - -# -# Platform options -# -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y - -# -# Ethernet (1000 Mbit) -# -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig deleted file mode 100644 index 4f1e320acfbe..000000000000 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ /dev/null @@ -1,784 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 17 11:56:01 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_GEN550=y -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -CONFIG_MPC8555_CDS=y -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8555=y -CONFIG_85xx_PCI2=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8560_ads_defconfig b/arch/ppc/configs/mpc8560_ads_defconfig deleted file mode 100644 index f12d48fcbba7..000000000000 --- a/arch/ppc/configs/mpc8560_ads_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Thu Aug 11 18:14:45 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -CONFIG_MPC8560_ADS=y -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig deleted file mode 100644 index 70d6f842aa9b..000000000000 --- a/arch/ppc/configs/stx_gp3_defconfig +++ /dev/null @@ -1,989 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 24 18:11:04 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -# CONFIG_SPE is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -CONFIG_STX_GP3=y -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_8_BIT_TRANSPORT=y -CONFIG_RAPIDIO_DISC_TIMEOUT=30 - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_LIMIT is not set -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_MAC is not set -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -# CONFIG_IP_NF_MATCH_MARK is not set -# CONFIG_IP_NF_MATCH_MULTIPORT is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -# CONFIG_IP_NF_MATCH_LENGTH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_TCPMSS is not set -# CONFIG_IP_NF_MATCH_HELPER is not set -# CONFIG_IP_NF_MATCH_STATE is not set -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_IP_NF_TARGET_TCPMSS is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=y -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_RIONET=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=y - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_XMON is not set -CONFIG_BDI_SWITCH=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 5da0ca7c302f..7b739054968f 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -4,7 +4,6 @@ extra-$(CONFIG_PPC_STD_MMU) := head.o extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o -extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index e8e94321b59e..a51a17714231 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -54,12 +54,6 @@ main(void) DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0])); - DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc)); - DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr)); - DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe)); -#endif /* CONFIG_SPE */ /* Interrupt register frame */ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 59e77eb63338..5f3a5d068a5c 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -519,12 +519,7 @@ BEGIN_FTR_SECTION stw r12,THREAD+THREAD_VRSAVE(r2) END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - oris r0,r0,MSR_SPE@h /* Disable SPE */ - mfspr r12,SPRN_SPEFSCR /* save spefscr register value */ - stw r12,THREAD+THREAD_SPEFSCR(r2) -#endif /* CONFIG_SPE */ - and. r0,r0,r11 /* FP or altivec or SPE enabled? */ + and. r0,r0,r11 /* FP or altivec enabled? */ beq+ 1f andc r11,r11,r0 MTMSRD(r11) @@ -557,11 +552,6 @@ BEGIN_FTR_SECTION mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - lwz r0,THREAD+THREAD_SPEFSCR(r2) - mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */ -#endif /* CONFIG_SPE */ - lwz r0,_CCR(r1) mtcrf 0xFF,r0 /* r3-r12 are destroyed -- Cort */ diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index f3d274c6b231..166d597b6db2 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -212,60 +212,6 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ -#ifdef CONFIG_E200 -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ - DEBUG_EXCEPTION_PROLOG; \ - \ - /* \ - * If there is a single step or branch-taken exception in an \ - * exception entry sequence, it was probably meant to apply to \ - * the code where the exception occurred (since exception entry \ - * doesn't turn off DE automatically). We simulate the effect \ - * of turning off DE on entry to an exception handler by turning \ - * off DE in the CSRR1 value and clearing the debug status. \ - */ \ - mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ - andis. r10,r10,DBSR_IC@h; \ - beq+ 2f; \ - \ - lis r10,KERNELBASE@h; /* check if exception in vectors */ \ - ori r10,r10,KERNELBASE@l; \ - cmplw r12,r10; \ - blt+ 2f; /* addr below exception vectors */ \ - \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ - cmplw r12,r10; \ - bgt+ 2f; /* addr above exception vectors */ \ - \ - /* here it looks like we got an inappropriate debug exception. */ \ -1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ - lis r10,DBSR_IC@h; /* clear the IC event */ \ - mtspr SPRN_DBSR,r10; \ - /* restore state and get out */ \ - lwz r10,_CCR(r11); \ - lwz r0,GPR0(r11); \ - lwz r1,GPR1(r11); \ - mtcrf 0x80,r10; \ - mtspr SPRN_DSRR0,r12; \ - mtspr SPRN_DSRR1,r9; \ - lwz r9,GPR9(r11); \ - lwz r12,GPR12(r11); \ - mtspr DEBUG_SPRG,r8; \ - BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ - lwz r10,GPR10-INT_FRAME_SIZE(r8); \ - lwz r11,GPR11-INT_FRAME_SIZE(r8); \ - mfspr r8,DEBUG_SPRG; \ - \ - RFDI; \ - b .; \ - \ - /* continue normal handling for a critical exception... */ \ -2: mfspr r4,SPRN_DBSR; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) -#else #define DEBUG_EXCEPTION \ START_EXCEPTION(Debug); \ CRITICAL_EXCEPTION_PROLOG; \ @@ -318,7 +264,6 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) -#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S deleted file mode 100644 index 1f155d399d57..000000000000 --- a/arch/ppc/kernel/head_fsl_booke.S +++ /dev/null @@ -1,1065 +0,0 @@ -/* - * Kernel execution entry point code. - * - * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> - * Initial PowerPC version. - * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu> - * Rewritten for PReP - * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> - * Low-level exception handers, MMU support, and rewrite. - * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> - * PowerPC 8xx modifications. - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * PowerPC 403GCX/405GP modifications. - * Copyright 2000 MontaVista Software Inc. - * PPC405 modifications - * PowerPC 403GCX/405GP modifications. - * Author: MontaVista Software, Inc. - * frank_rowand@mvista.com or source@mvista.com - * debbie_chu@mvista.com - * Copyright 2002-2004 MontaVista Software, Inc. - * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include "head_booke.h" - -/* As with the other PowerPC ports, it is expected that when code - * execution begins here, the following registers contain valid, yet - * optional, information: - * - * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) - * r4 - Starting address of the init RAM disk - * r5 - Ending address of the init RAM disk - * r6 - Start of kernel command line string (e.g. "mem=128") - * r7 - End of kernel command line string - * - */ - .text -_GLOBAL(_stext) -_GLOBAL(_start) - /* - * Reserve a word at a fixed location to store the address - * of abatron_pteptrs - */ - nop -/* - * Save parameters we are passed - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - li r24,0 /* CPU number */ - -/* We try to not make any assumptions about how the boot loader - * setup or used the TLBs. We invalidate all mappings from the - * boot loader and load a single entry in TLB1[0] to map the - * first 16M of kernel memory. Any boot info passed from the - * bootloader needs to live in this first 16M. - * - * Requirement on bootloader: - * - The page we're executing in needs to reside in TLB1 and - * have IPROT=1. If not an invalidate broadcast could - * evict the entry we're currently executing in. - * - * r3 = Index of TLB1 were executing in - * r4 = Current MSR[IS] - * r5 = Index of TLB1 temp mapping - * - * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0] - * if needed - */ - -/* 1. Find the index of the entry we're executing in */ - bl invstr /* Find our address */ -invstr: mflr r6 /* Make it accessible */ - mfmsr r7 - rlwinm r4,r7,27,31,31 /* extract MSR[IS] */ - mfspr r7, SPRN_PID0 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ -#ifndef CONFIG_E200 - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - mfspr r7,SPRN_PID1 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */ - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - mfspr r7, SPRN_PID2 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* Fall through, we had to match */ -#endif -match_TLB: - mfspr r7,SPRN_MAS0 - rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ - - mfspr r7,SPRN_MAS1 /* Insure IPROT set */ - oris r7,r7,MAS1_IPROT@h - mtspr SPRN_MAS1,r7 - tlbwe - -/* 2. Invalidate all entries except the entry we're executing in */ - mfspr r9,SPRN_TLB1CFG - andi. r9,r9,0xfff - li r6,0 /* Set Entry counter to 0 */ -1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r7,SPRN_MAS1 - rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ - cmpw r3,r6 - beq skpinv /* Dont update the current execution TLB */ - mtspr SPRN_MAS1,r7 - tlbwe - isync -skpinv: addi r6,r6,1 /* Increment */ - cmpw r6,r9 /* Are we done? */ - bne 1b /* If not, repeat */ - - /* Invalidate TLB0 */ - li r6,0x04 - tlbivax 0,r6 -#ifdef CONFIG_SMP - tlbsync -#endif - /* Invalidate TLB1 */ - li r6,0x0c - tlbivax 0,r6 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - -/* 3. Setup a temp mapping and jump to it */ - andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */ - addi r5, r5, 0x1 - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - - /* Just modify the entry ID and EPN for the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - xori r6,r4,1 /* Setup TMP mapping in the other Address space */ - slwi r6,r6,12 - oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l - mtspr SPRN_MAS1,r6 - mfspr r6,SPRN_MAS2 - li r7,0 /* temp EPN = 0 */ - rlwimi r7,r6,0,20,31 - mtspr SPRN_MAS2,r7 - tlbwe - - xori r6,r4,1 - slwi r6,r6,5 /* setup new context with other address space */ - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r7,r9,0,20,31 - addi r7,r7,24 - mtspr SPRN_SRR0,r7 - mtspr SPRN_SRR1,r6 - rfi - -/* 4. Clear out PIDs & Search info */ - li r6,0 - mtspr SPRN_PID0,r6 -#ifndef CONFIG_E200 - mtspr SPRN_PID1,r6 - mtspr SPRN_PID2,r6 -#endif - mtspr SPRN_MAS6,r6 - -/* 5. Invalidate mapping we started in */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r6,SPRN_MAS1 - rlwinm r6,r6,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r6 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - -/* 6. Setup KERNELBASE mapping in TLB1[0] */ - lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ - mtspr SPRN_MAS0,r6 - lis r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l - mtspr SPRN_MAS1,r6 - li r7,0 - lis r6,KERNELBASE@h - ori r6,r6,KERNELBASE@l - rlwimi r6,r7,0,20,31 - mtspr SPRN_MAS2,r6 - li r7,(MAS3_SX|MAS3_SW|MAS3_SR) - mtspr SPRN_MAS3,r7 - tlbwe - -/* 7. Jump to KERNELBASE mapping */ - lis r7,MSR_KERNEL@h - ori r7,r7,MSR_KERNEL@l - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r6,r9,0,20,31 - addi r6,r6,24 - mtspr SPRN_SRR0,r6 - mtspr SPRN_SRR1,r7 - rfi /* start execution out of TLB1[0] entry */ - -/* 8. Clear out the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r8,SPRN_MAS1 - rlwinm r8,r8,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r8 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - - /* Establish the interrupt vector offsets */ - SET_IVOR(0, CriticalInput); - SET_IVOR(1, MachineCheck); - SET_IVOR(2, DataStorage); - SET_IVOR(3, InstructionStorage); - SET_IVOR(4, ExternalInput); - SET_IVOR(5, Alignment); - SET_IVOR(6, Program); - SET_IVOR(7, FloatingPointUnavailable); - SET_IVOR(8, SystemCall); - SET_IVOR(9, AuxillaryProcessorUnavailable); - SET_IVOR(10, Decrementer); - SET_IVOR(11, FixedIntervalTimer); - SET_IVOR(12, WatchdogTimer); - SET_IVOR(13, DataTLBError); - SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); - SET_IVOR(32, SPEUnavailable); - SET_IVOR(33, SPEFloatingPointData); - SET_IVOR(34, SPEFloatingPointRound); -#ifndef CONFIG_E200 - SET_IVOR(35, PerformanceMonitor); -#endif - - /* Establish the interrupt vector base */ - lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ - mtspr SPRN_IVPR,r4 - - /* Setup the defaults for TLB entries */ - li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l -#ifdef CONFIG_E200 - oris r2,r2,MAS4_TLBSELD(1)@h -#endif - mtspr SPRN_MAS4, r2 - -#if 0 - /* Enable DOZE */ - mfspr r2,SPRN_HID0 - oris r2,r2,HID0_DOZE@h - mtspr SPRN_HID0, r2 -#endif -#ifdef CONFIG_E200 - /* enable dedicated debug exception handling resources (Debug APU) */ - mfspr r2,SPRN_HID0 - ori r2,r2,HID0_DAPUEN@l - mtspr SPRN_HID0,r2 -#endif - -#if !defined(CONFIG_BDI_SWITCH) - /* - * The Abatron BDI JTAG debugger does not tolerate others - * mucking with the debug registers. - */ - lis r2,DBCR0_IDM@h - mtspr SPRN_DBCR0,r2 - isync - /* clear any residual debug events */ - li r2,-1 - mtspr SPRN_DBSR,r2 -#endif - - /* - * This is where the main kernel code starts. - */ - - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - - /* ptr to current thread */ - addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 - - /* stack */ - lis r1,init_thread_union@h - ori r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) - - bl early_init - - mfspr r3,SPRN_TLB1CFG - andi. r3,r3,0xfff - lis r4,num_tlbcam_entries@ha - stw r3,num_tlbcam_entries@l(r4) -/* - * Decide what sort of machine this is and initialize the MMU. - */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - bl machine_init - bl MMU_init - - /* Setup PTE pointers for the Abatron bdiGDB */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - lis r4, KERNELBASE@h - ori r4, r4, KERNELBASE@l - stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */ - stw r6, 0(r5) - - /* Let's move on */ - lis r4,start_kernel@h - ori r4,r4,start_kernel@l - lis r3,MSR_KERNEL@h - ori r3,r3,MSR_KERNEL@l - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - rfi /* change context and jump to start_kernel */ - -/* Macros to hide the PTE size differences - * - * FIND_PTE -- walks the page tables given EA & pgdir pointer - * r10 -- EA of fault - * r11 -- PGDIR pointer - * r12 -- free - * label 2: is the bailout case - * - * if we find the pte (fall through): - * r11 is low pte word - * r12 is pointer to the pte - */ -#ifdef CONFIG_PTE_64BIT -#define PTE_FLAGS_OFFSET 4 -#define FIND_PTE \ - rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \ - lwzx r11, r12, r11; /* Get pgd/pmd entry */ \ - rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \ - beq 2f; /* Bail if no table */ \ - rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \ - lwz r11, 4(r12); /* Get pte entry */ -#else -#define PTE_FLAGS_OFFSET 0 -#define FIND_PTE \ - rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \ - lwz r11, 0(r11); /* Get L1 entry */ \ - rlwinm. r12, r11, 0, 0, 19; /* Extract L2 (pte) base address */ \ - beq 2f; /* Bail if no table */ \ - rlwimi r12, r10, 22, 20, 29; /* Compute PTE address */ \ - lwz r11, 0(r12); /* Get Linux PTE */ -#endif - -/* - * Interrupt vector entry code - * - * The Book E MMUs are always on so we don't need to handle - * interrupts in real mode as with previous PPC processors. In - * this case we handle interrupts in the kernel virtual address - * space. - * - * Interrupt vectors are dynamically placed relative to the - * interrupt prefix as determined by the address of interrupt_base. - * The interrupt vectors offsets are programmed using the labels - * for each interrupt vector entry. - * - * Interrupt vectors must be aligned on a 16 byte boundary. - * We align on a 32 byte cache line boundary for good measure. - */ - -interrupt_base: - /* Critical Input Interrupt */ - CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception) - - /* Machine Check Interrupt */ -#ifdef CONFIG_E200 - /* no RFMCI, MCSRRs on E200 */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#else - MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#endif - - /* Data Storage Interrupt */ - START_EXCEPTION(DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - - /* - * Check if it was a store fault, if not then bail - * because a user tried to access a kernel or - * read-protected page. Otherwise, get the - * offending address and handle it. - */ - mfspr r10, SPRN_ESR - andis. r10, r10, ESR_ST@h - beq 2f - - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 0, r10, r11 - bge 2f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) -4: - FIND_PTE - - /* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */ - andi. r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE - cmpwi 0, r13, _PAGE_RW|_PAGE_USER - bne 2f /* Bail if not */ - - /* Update 'changed'. */ - ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE - stw r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */ - - /* MAS2 not updated as the entry does exist in the tlb, this - fault taken to detect state transition (eg: COW -> DIRTY) - */ - andi. r11, r11, _PAGE_HWEXEC - rlwimi r11, r11, 31, 27, 27 /* SX <- _PAGE_HWEXEC */ - ori r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */ - - /* update search PID in MAS6, AS = 0 */ - mfspr r12, SPRN_PID0 - slwi r12, r12, 16 - mtspr SPRN_MAS6, r12 - - /* find the TLB index that caused the fault. It has to be here. */ - tlbsx 0, r10 - - /* only update the perm bits, assume the RPN is fine */ - mfspr r12, SPRN_MAS3 - rlwimi r12, r11, 0, 20, 31 - mtspr SPRN_MAS3,r12 - tlbwe - - /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - rfi /* Force context change */ - -2: - /* - * The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b data_access - - /* Instruction Storage Interrupt */ - INSTRUCTION_STORAGE_EXCEPTION - - /* External Input Interrupt */ - EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE) - - /* Alignment Interrupt */ - ALIGNMENT_EXCEPTION - - /* Program Interrupt */ - PROGRAM_EXCEPTION - - /* Floating Point Unavailable Interrupt */ -#ifdef CONFIG_PPC_FPU - FP_UNAVAILABLE_EXCEPTION -#else -#ifdef CONFIG_E200 - /* E200 treats 'normal' floating point instructions as FP Unavail exception */ - EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE) -#else - EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE) -#endif -#endif - - /* System Call Interrupt */ - START_EXCEPTION(SystemCall) - NORMAL_EXCEPTION_PROLOG - EXC_XFER_EE_LITE(0x0c00, DoSyscall) - - /* Auxillary Processor Unavailable Interrupt */ - EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) - - /* Decrementer Interrupt */ - DECREMENTER_EXCEPTION - - /* Fixed Internal Timer Interrupt */ - /* TODO: Add FIT support */ - EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE) - - /* Watchdog Timer Interrupt */ -#ifdef CONFIG_BOOKE_WDT - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException) -#else - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception) -#endif - - /* Data TLB Error Interrupt */ - START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 5, r10, r11 - blt 5, 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - - mfspr r12,SPRN_MAS1 /* Set TID to 0 */ - rlwinm r12,r12,0,16,1 - mtspr SPRN_MAS1,r12 - - b 4f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) - -4: - FIND_PTE - andi. r13, r11, _PAGE_PRESENT /* Is the page present? */ - beq 2f /* Bail if not present */ - -#ifdef CONFIG_PTE_64BIT - lwz r13, 0(r12) -#endif - ori r11, r11, _PAGE_ACCESSED - stw r11, PTE_FLAGS_OFFSET(r12) - - /* Jump to common tlb load */ - b finish_tlb_load -2: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b data_access - - /* Instruction TLB Error Interrupt */ - /* - * Nearly the same as above, except we get our - * information from different registers and bailout - * to a different point. - */ - START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - mfspr r10, SPRN_SRR0 /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 5, r10, r11 - blt 5, 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - - mfspr r12,SPRN_MAS1 /* Set TID to 0 */ - rlwinm r12,r12,0,16,1 - mtspr SPRN_MAS1,r12 - - b 4f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) - -4: - FIND_PTE - andi. r13, r11, _PAGE_PRESENT /* Is the page present? */ - beq 2f /* Bail if not present */ - -#ifdef CONFIG_PTE_64BIT - lwz r13, 0(r12) -#endif - ori r11, r11, _PAGE_ACCESSED - stw r11, PTE_FLAGS_OFFSET(r12) - - /* Jump to common TLB load point */ - b finish_tlb_load - -2: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b InstructionStorage - -#ifdef CONFIG_SPE - /* SPE Unavailable */ - START_EXCEPTION(SPEUnavailable) - NORMAL_EXCEPTION_PROLOG - bne load_up_spe - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0x2010, KernelSPE) -#else - EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_SPE */ - - /* SPE Floating Point Data */ -#ifdef CONFIG_SPE - EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE); -#else - EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_SPE */ - - /* SPE Floating Point Round */ - EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE) - - /* Performance Monitor */ - EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - - - /* Debug Interrupt */ - DEBUG_EXCEPTION - -/* - * Local functions - */ - - /* - * Data TLB exceptions will bail out to this point - * if they can't resolve the lightweight TLB fault. - */ -data_access: - NORMAL_EXCEPTION_PROLOG - mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ - stw r5,_ESR(r11) - mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ - andis. r10,r5,(ESR_ILK|ESR_DLK)@h - bne 1f - EXC_XFER_EE_LITE(0x0300, handle_page_fault) -1: - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0x0300, CacheLockingException) - -/* - - * Both the instruction and data TLB miss get to this - * point to load the TLB. - * r10 - EA of fault - * r11 - TLB (info from Linux PTE) - * r12, r13 - available to use - * CR5 - results of addr < TASK_SIZE - * MAS0, MAS1 - loaded with proper value when we get here - * MAS2, MAS3 - will need additional info from Linux PTE - * Upon exit, we reload everything and RFI. - */ -finish_tlb_load: - /* - * We set execute, because we don't have the granularity to - * properly set this at the page level (Linux problem). - * Many of these bits are software only. Bits we don't set - * here we (properly should) assume have the appropriate value. - */ - - mfspr r12, SPRN_MAS2 -#ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */ -#else - rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ -#endif - mtspr SPRN_MAS2, r12 - - bge 5, 1f - - /* is user addr */ - andi. r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC) - andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ - srwi r10, r12, 1 - or r12, r12, r10 /* Copy user perms into supervisor */ - iseleq r12, 0, r12 - b 2f - - /* is kernel addr */ -1: rlwinm r12, r11, 31, 29, 29 /* Extract _PAGE_HWWRITE into SW */ - ori r12, r12, (MAS3_SX | MAS3_SR) - -#ifdef CONFIG_PTE_64BIT -2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ - rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ - mtspr SPRN_MAS3, r12 -BEGIN_FTR_SECTION - srwi r10, r13, 8 /* grab RPN[8:31] */ - mtspr SPRN_MAS7, r10 -END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS) -#else -2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ - mtspr SPRN_MAS3, r11 -#endif -#ifdef CONFIG_E200 - /* Round robin TLB1 entries assignment */ - mfspr r12, SPRN_MAS0 - - /* Extract TLB1CFG(NENTRY) */ - mfspr r11, SPRN_TLB1CFG - andi. r11, r11, 0xfff - - /* Extract MAS0(NV) */ - andi. r13, r12, 0xfff - addi r13, r13, 1 - cmpw 0, r13, r11 - addi r12, r12, 1 - - /* check if we need to wrap */ - blt 7f - - /* wrap back to first free tlbcam entry */ - lis r13, tlbcam_index@ha - lwz r13, tlbcam_index@l(r13) - rlwimi r12, r13, 0, 20, 31 -7: - mtspr SPRN_MAS0,r12 -#endif /* CONFIG_E200 */ - - tlbwe - - /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - rfi /* Force context change */ - -#ifdef CONFIG_SPE -/* Note that the SPE support is closely modeled after the AltiVec - * support. Changes to one are likely to be applicable to the - * other! */ -load_up_spe: -/* - * Disable SPE for the task which had SPE previously, - * and save its SPE registers in its thread_struct. - * Enables SPE for use in the kernel on return. - * On SMP we know the SPE units are free, since we give it up every - * switch. -- Kumar - */ - mfmsr r5 - oris r5,r5,MSR_SPE@h - mtmsr r5 /* enable use of SPE now */ - isync -/* - * For SMP, we don't do lazy SPE switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_spe in switch_to. - */ -#ifndef CONFIG_SMP - lis r3,last_task_used_spe@ha - lwz r4,last_task_used_spe@l(r3) - cmpi 0,r4,0 - beq 1f - addi r4,r4,THREAD /* want THREAD of last_task_used_spe */ - SAVE_32EVRS(0,r10,r4) - evxor evr10, evr10, evr10 /* clear out evr10 */ - evmwumiaa evr10, evr10, evr10 /* evr10 <- ACC = 0 * 0 + ACC */ - li r5,THREAD_ACC - evstddx evr10, r4, r5 /* save off accumulator */ - lwz r5,PT_REGS(r4) - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r10,MSR_SPE@h - andc r4,r4,r10 /* disable SPE for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of SPE after return */ - oris r9,r9,MSR_SPE@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - li r4,1 - li r10,THREAD_ACC - stw r4,THREAD_USED_SPE(r5) - evlddx evr4,r10,r5 - evmra evr4,evr4 - REST_32EVRS(0,r10,r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - stw r4,last_task_used_spe@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ -2: REST_4GPRS(3, r11) - lwz r10,_CCR(r11) - REST_GPR(1, r11) - mtcr r10 - lwz r10,_LINK(r11) - mtlr r10 - REST_GPR(10, r11) - mtspr SPRN_SRR1,r9 - mtspr SPRN_SRR0,r12 - REST_GPR(9, r11) - REST_GPR(12, r11) - lwz r11,GPR11(r11) - rfi - -/* - * SPE unavailable trap from kernel - print a message, but let - * the task use SPE in the kernel until it returns to user mode. - */ -KernelSPE: - lwz r3,_MSR(r1) - oris r3,r3,MSR_SPE@h - stw r3,_MSR(r1) /* enable use of SPE after return */ - lis r3,87f@h - ori r3,r3,87f@l - mr r4,r2 /* current */ - lwz r5,_NIP(r1) - bl printk - b ret_from_except -87: .string "SPE used in kernel (task=%p, pc=%x) \n" - .align 4,0 - -#endif /* CONFIG_SPE */ - -/* - * Global functions - */ - -/* - * extern void loadcam_entry(unsigned int index) - * - * Load TLBCAM[index] entry in to the L2 CAM MMU - */ -_GLOBAL(loadcam_entry) - lis r4,TLBCAM@ha - addi r4,r4,TLBCAM@l - mulli r5,r3,20 - add r3,r5,r4 - lwz r4,0(r3) - mtspr SPRN_MAS0,r4 - lwz r4,4(r3) - mtspr SPRN_MAS1,r4 - lwz r4,8(r3) - mtspr SPRN_MAS2,r4 - lwz r4,12(r3) - mtspr SPRN_MAS3,r4 - tlbwe - isync - blr - -/* - * extern void giveup_altivec(struct task_struct *prev) - * - * The e500 core does not have an AltiVec unit. - */ -_GLOBAL(giveup_altivec) - blr - -#ifdef CONFIG_SPE -/* - * extern void giveup_spe(struct task_struct *prev) - * - */ -_GLOBAL(giveup_spe) - mfmsr r5 - oris r5,r5,MSR_SPE@h - mtmsr r5 /* enable use of SPE now */ - isync - cmpi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpi 0,r5,0 - SAVE_32EVRS(0, r4, r3) - evxor evr6, evr6, evr6 /* clear out evr6 */ - evmwumiaa evr6, evr6, evr6 /* evr6 <- ACC = 0 * 0 + ACC */ - li r4,THREAD_ACC - evstddx evr6, r4, r3 /* save off accumulator */ - mfspr r6,SPRN_SPEFSCR - stw r6,THREAD_SPEFSCR(r3) /* save spefscr register value */ - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_SPE@h - andc r4,r4,r3 /* disable SPE for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_spe@ha - stw r5,last_task_used_spe@l(r4) -#endif /* CONFIG_SMP */ - blr -#endif /* CONFIG_SPE */ - -/* - * extern void giveup_fpu(struct task_struct *prev) - * - * Not all FSL Book-E cores have an FPU - */ -#ifndef CONFIG_PPC_FPU -_GLOBAL(giveup_fpu) - blr -#endif - -/* - * extern void abort(void) - * - * At present, this routine just applies a system reset. - */ -_GLOBAL(abort) - li r13,0 - mtspr SPRN_DBCR0,r13 /* disable all debug events */ - isync - mfmsr r13 - ori r13,r13,MSR_DE@l /* Enable Debug Events */ - mtmsr r13 - isync - mfspr r13,SPRN_DBCR0 - lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h - mtspr SPRN_DBCR0,r13 - isync - -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is the second parameter. - */ - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r4, 0x4(r5) -#endif - mtspr SPRN_PID,r3 - isync /* Force context change */ - blr - -/* - * We put a few things here that have to be page-aligned. This stuff - * goes at the beginning of the data segment, which is page-aligned. - */ - .data - .align 12 - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 - .globl swapper_pg_dir -swapper_pg_dir: - .space 4096 - -/* Reserved 4k for the critical exception stack & 4k for the machine - * check stack per CPU for kernel mode exceptions */ - .section .bss - .align 12 -exception_stack_bottom: - .space BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS - .globl exception_stack_top -exception_stack_top: - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * which is used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space 512 - -/* - * Room for two PTE pointers, usually the kernel and current user pointers - * to their respective root page table. - */ -abatron_pteptrs: - .space 8 diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index e0c850d85c53..d5e0dfc9ffec 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -165,24 +165,7 @@ _GLOBAL(_tlbia) ble 1b isync -#elif defined(CONFIG_FSL_BOOKE) - /* Invalidate all entries in TLB0 */ - li r3, 0x04 - tlbivax 0,3 - /* Invalidate all entries in TLB1 */ - li r3, 0x0c - tlbivax 0,3 - /* Invalidate all entries in TLB2 */ - li r3, 0x14 - tlbivax 0,3 - /* Invalidate all entries in TLB3 */ - li r3, 0x1c - tlbivax 0,3 - msync -#ifdef CONFIG_SMP - tlbsync -#endif /* CONFIG_SMP */ -#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#else /* !(CONFIG_40x || CONFIG_44x) */ #if defined(CONFIG_SMP) rlwinm r8,r1,0,0,18 lwz r8,TI_CPU(r8) @@ -268,20 +251,7 @@ _GLOBAL(_tlbie) tlbwe r3, r3, PPC44x_TLB_PAGEID isync 10: -#elif defined(CONFIG_FSL_BOOKE) - rlwinm r4, r3, 0, 0, 19 - ori r5, r4, 0x08 /* TLBSEL = 1 */ - ori r6, r4, 0x10 /* TLBSEL = 2 */ - ori r7, r4, 0x18 /* TLBSEL = 3 */ - tlbivax 0, r4 - tlbivax 0, r5 - tlbivax 0, r6 - tlbivax 0, r7 - msync -#if defined(CONFIG_SMP) - tlbsync -#endif /* CONFIG_SMP */ -#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#else /* !(CONFIG_40x || CONFIG_44x) */ #if defined(CONFIG_SMP) rlwinm r8,r1,0,0,18 lwz r8,TI_CPU(r8) @@ -338,18 +308,6 @@ _GLOBAL(flush_instruction_cache) lis r3, KERNELBASE@h iccci 0,r3 #endif -#elif CONFIG_FSL_BOOKE -BEGIN_FTR_SECTION - mfspr r3,SPRN_L1CSR0 - ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC - /* msync; isync recommended here */ - mtspr SPRN_L1CSR0,r3 - isync - blr -END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) - mfspr r3,SPRN_L1CSR1 - ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR - mtspr SPRN_L1CSR1,r3 #else mfspr r3,SPRN_PVR rlwinm r3,r3,16,16,31 diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index ba729ce2071c..c35350250cfc 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -166,12 +166,6 @@ EXPORT_SYMBOL(last_task_used_altivec); #endif EXPORT_SYMBOL(giveup_altivec); #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE -#ifndef CONFIG_SMP -EXPORT_SYMBOL(last_task_used_spe); -#endif -EXPORT_SYMBOL(giveup_spe); -#endif /* CONFIG_SPE */ #ifdef CONFIG_SMP EXPORT_SYMBOL(smp_call_function); EXPORT_SYMBOL(smp_hw_index); @@ -244,7 +238,7 @@ EXPORT_SYMBOL(debugger_fault_handler); EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_free_handler); #endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx) +#if defined(CONFIG_8xx) || defined(CONFIG_40x) EXPORT_SYMBOL(__res); #endif diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5888ae6a4ac8..d51368d72e39 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -38,8 +38,7 @@ #include <asm/xmon.h> #include <asm/ocp.h> -#define USES_PPC_SYS (defined(CONFIG_85xx) || \ - defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ +#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ defined(CONFIG_PPC_MPC52xx)) #if USES_PPC_SYS diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index 25a1085fbd01..a467a429c2fe 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -194,11 +194,7 @@ static inline int check_io_access(struct pt_regs *regs) /* On 4xx, the reason for the machine check or program exception is in the ESR. */ #define get_reason(regs) ((regs)->dsisr) -#ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) -#else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) -#endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) #define REASON_PRIVILEGED ESR_PPR @@ -281,66 +277,6 @@ int machine_check_440A(struct pt_regs *regs) } return 0; } -#elif defined(CONFIG_E500) -int machine_check_e500(struct pt_regs *regs) -{ - unsigned long reason = get_mc_reason(regs); - - printk("Machine check in kernel mode.\n"); - printk("Caused by (from MCSR=%lx): ", reason); - - if (reason & MCSR_MCP) - printk("Machine Check Signal\n"); - if (reason & MCSR_ICPERR) - printk("Instruction Cache Parity Error\n"); - if (reason & MCSR_DCP_PERR) - printk("Data Cache Push Parity Error\n"); - if (reason & MCSR_DCPERR) - printk("Data Cache Parity Error\n"); - if (reason & MCSR_BUS_IAERR) - printk("Bus - Instruction Address Error\n"); - if (reason & MCSR_BUS_RAERR) - printk("Bus - Read Address Error\n"); - if (reason & MCSR_BUS_WAERR) - printk("Bus - Write Address Error\n"); - if (reason & MCSR_BUS_IBERR) - printk("Bus - Instruction Data Error\n"); - if (reason & MCSR_BUS_RBERR) - printk("Bus - Read Data Bus Error\n"); - if (reason & MCSR_BUS_WBERR) - printk("Bus - Read Data Bus Error\n"); - if (reason & MCSR_BUS_IPERR) - printk("Bus - Instruction Parity Error\n"); - if (reason & MCSR_BUS_RPERR) - printk("Bus - Read Parity Error\n"); - - return 0; -} -#elif defined(CONFIG_E200) -int machine_check_e200(struct pt_regs *regs) -{ - unsigned long reason = get_mc_reason(regs); - - printk("Machine check in kernel mode.\n"); - printk("Caused by (from MCSR=%lx): ", reason); - - if (reason & MCSR_MCP) - printk("Machine Check Signal\n"); - if (reason & MCSR_CP_PERR) - printk("Cache Push Parity Error\n"); - if (reason & MCSR_CPERR) - printk("Cache Parity Error\n"); - if (reason & MCSR_EXCP_ERR) - printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n"); - if (reason & MCSR_BUS_IRERR) - printk("Bus - Read Bus Error on instruction fetch\n"); - if (reason & MCSR_BUS_DRERR) - printk("Bus - Read Bus Error on data load\n"); - if (reason & MCSR_BUS_WRERR) - printk("Bus - Write Bus Error on buffered store or cache line push\n"); - - return 0; -} #else int machine_check_generic(struct pt_regs *regs) { @@ -866,63 +802,6 @@ void altivec_assist_exception(struct pt_regs *regs) } #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_E500 -void performance_monitor_exception(struct pt_regs *regs) -{ - perf_irq(regs); -} -#endif - -#ifdef CONFIG_FSL_BOOKE -void CacheLockingException(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ - /* We treat cache locking instructions from the user - * as priv ops, in the future we could try to do - * something smarter - */ - if (error_code & (ESR_DLK|ESR_ILK)) - _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); - return; -} -#endif /* CONFIG_FSL_BOOKE */ - -#ifdef CONFIG_SPE -void SPEFloatingPointException(struct pt_regs *regs) -{ - unsigned long spefscr; - int fpexc_mode; - int code = 0; - - spefscr = current->thread.spefscr; - fpexc_mode = current->thread.fpexc_mode; - - /* Hardware does not necessarily set sticky - * underflow/overflow/invalid flags */ - if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) { - code = FPE_FLTOVF; - spefscr |= SPEFSCR_FOVFS; - } - else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) { - code = FPE_FLTUND; - spefscr |= SPEFSCR_FUNFS; - } - else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV)) - code = FPE_FLTDIV; - else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) { - code = FPE_FLTINV; - spefscr |= SPEFSCR_FINVS; - } - else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES)) - code = FPE_FLTRES; - - current->thread.spefscr = spefscr; - - _exception(SIGFPE, regs, code, regs->nip); - return; -} -#endif - #ifdef CONFIG_BOOKE_WDT /* * Default handler for a Watchdog exception, diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile index cd3eae147cf8..691ba2bae05d 100644 --- a/arch/ppc/mm/Makefile +++ b/arch/ppc/mm/Makefile @@ -8,4 +8,3 @@ obj-y := fault.o init.o mem_pieces.o \ obj-$(CONFIG_PPC_STD_MMU) += hashtable.o ppc_mmu.o tlb.o obj-$(CONFIG_40x) += 4xx_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o -obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c deleted file mode 100644 index 123da03ab118..000000000000 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Modifications by Kumar Gala (galak@kernel.crashing.org) to support - * E500 Book E processors. - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/stddef.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/highmem.h> - -#include <asm/pgalloc.h> -#include <asm/prom.h> -#include <asm/io.h> -#include <asm/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/uaccess.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/machdep.h> -#include <asm/setup.h> - -extern void loadcam_entry(unsigned int index); -unsigned int tlbcam_index; -unsigned int num_tlbcam_entries; -static unsigned long __cam0, __cam1, __cam2; -extern unsigned long total_lowmem; -extern unsigned long __max_low_memory; -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE - -#define NUM_TLBCAMS (16) - -struct tlbcam { - u32 MAS0; - u32 MAS1; - u32 MAS2; - u32 MAS3; - u32 MAS7; -} TLBCAM[NUM_TLBCAMS]; - -struct tlbcamrange { - unsigned long start; - unsigned long limit; - phys_addr_t phys; -} tlbcam_addrs[NUM_TLBCAMS]; - -extern unsigned int tlbcam_index; - -/* - * Return PA for this VA if it is mapped by a CAM, or 0 - */ -unsigned long v_mapped_by_tlbcam(unsigned long va) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) - return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); - return 0; -} - -/* - * Return VA for a given PA or 0 if not mapped - */ -unsigned long p_mapped_by_tlbcam(unsigned long pa) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (pa >= tlbcam_addrs[b].phys - && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) - +tlbcam_addrs[b].phys) - return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); - return 0; -} - -/* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. - */ -void settlbcam(int index, unsigned long virt, phys_addr_t phys, - unsigned int size, int flags, unsigned int pid) -{ - unsigned int tsize, lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - tsize = (21 - lz) / 2; - -#ifdef CONFIG_SMP - if ((flags & _PAGE_NO_CACHE) == 0) - flags |= _PAGE_COHERENT; -#endif - - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); - TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); - TLBCAM[index].MAS2 = virt & PAGE_MASK; - - TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; - - TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); - -#ifndef CONFIG_KGDB /* want user access for breakpoints */ - if (flags & _PAGE_USER) { - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); - } -#else - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); -#endif - - tlbcam_addrs[index].start = virt; - tlbcam_addrs[index].limit = virt + size - 1; - tlbcam_addrs[index].phys = phys; - - loadcam_entry(index); -} - -void invalidate_tlbcam_entry(int index) -{ - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); - TLBCAM[index].MAS1 = ~MAS1_VALID; - - loadcam_entry(index); -} - -void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, - unsigned long cam2) -{ - settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); - tlbcam_index++; - if (cam1) { - tlbcam_index++; - settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); - } - if (cam2) { - tlbcam_index++; - settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); - } -} - -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - flush_instruction_cache(); -} - -unsigned long __init mmu_mapin_ram(void) -{ - cam_mapin_ram(__cam0, __cam1, __cam2); - - return __cam0 + __cam1 + __cam2; -} - - -void __init -adjust_total_lowmem(void) -{ - unsigned long max_low_mem = MAX_LOW_MEM; - unsigned long cam_max = 0x10000000; - unsigned long ram; - - /* adjust CAM size to max_low_mem */ - if (max_low_mem < cam_max) - cam_max = max_low_mem; - - /* adjust lowmem size to max_low_mem */ - if (max_low_mem < total_lowmem) - ram = max_low_mem; - else - ram = total_lowmem; - - /* Calculate CAM values */ - __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max) - __cam0 = cam_max; - ram -= __cam0; - if (ram) { - __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max) - __cam1 = cam_max; - ram -= __cam1; - } - if (ram) { - __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max) - __cam2 = cam_max; - ram -= __cam2; - } - - printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," - " CAM2=%ldMb residual: %ldMb\n", - __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, - (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); - __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; -} diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index dd898d32480e..7444df3889c5 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -241,12 +241,6 @@ void __init MMU_init(void) if (__max_memory && total_memory > __max_memory) total_memory = __max_memory; total_lowmem = total_memory; -#ifdef CONFIG_FSL_BOOKE - /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB - * entries, so we need to adjust lowmem to match the amount we can map - * in the fixed entries */ - adjust_total_lowmem(); -#endif /* CONFIG_FSL_BOOKE */ if (total_lowmem > __max_low_memory) { total_lowmem = __max_low_memory; #ifndef CONFIG_HIGHMEM diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index b298b60c202f..5f813e386b87 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -58,12 +58,6 @@ extern unsigned int num_tlbcam_entries; extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); -#elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(pid, va, pg) _tlbie(va, pid) -extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); -extern void adjust_total_lowmem(void); - #else /* anything except 4xx or 8xx */ extern void MMU_init_hw(void); diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 1f51e6c94507..fadacfd18806 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -42,10 +42,6 @@ int io_bat_index; #define HAVE_BATS 1 #endif -#if defined(CONFIG_FSL_BOOKE) -#define HAVE_TLBCAM 1 -#endif - extern char etext[], _stext[]; #ifdef CONFIG_SMP @@ -63,15 +59,6 @@ void setbat(int index, unsigned long virt, unsigned long phys, #define p_mapped_by_bats(x) (0UL) #endif /* HAVE_BATS */ -#ifdef HAVE_TLBCAM -extern unsigned int tlbcam_index; -extern unsigned long v_mapped_by_tlbcam(unsigned long va); -extern unsigned long p_mapped_by_tlbcam(unsigned long pa); -#else /* !HAVE_TLBCAM */ -#define v_mapped_by_tlbcam(x) (0UL) -#define p_mapped_by_tlbcam(x) (0UL) -#endif /* HAVE_TLBCAM */ - #ifdef CONFIG_PTE_64BIT /* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */ #define PGDIR_ORDER 1 @@ -213,9 +200,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ ) goto out; - if ((v = p_mapped_by_tlbcam(p))) - goto out; - if (mem_init_done) { struct vm_struct *area; area = get_vm_area(size, VM_IOREMAP); @@ -341,18 +325,6 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys, } #endif /* HAVE_BATS */ -#ifdef HAVE_TLBCAM - /* - * Use a CAM for this if possible... - */ - if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size) - && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) { - settlbcam(tlbcam_index, virt, phys, size, flags, 0); - ++tlbcam_index; - return; - } -#endif /* HAVE_TLBCAM */ - /* No BATs available, put it in the page tables. */ for (i = 0; i < size; i += PAGE_SIZE) map_page(virt + i, phys + i, flags); diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig deleted file mode 100644 index 6f2d0add7de6..000000000000 --- a/arch/ppc/platforms/85xx/Kconfig +++ /dev/null @@ -1,106 +0,0 @@ -config 85xx - bool - depends on E500 - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on 85xx - default y - -menu "Freescale 85xx options" - depends on E500 - -choice - prompt "Machine Type" - depends on 85xx - default MPC8540_ADS - -config MPC8540_ADS - bool "Freescale MPC8540 ADS" - help - This option enables support for the MPC 8540 ADS evaluation board. - -config MPC8548_CDS - bool "Freescale MPC8548 CDS" - help - This option enables support for the MPC8548 CDS evaluation board. - -config MPC8555_CDS - bool "Freescale MPC8555 CDS" - help - This option enables support for the MPC8555 CDS evaluation board. - -config MPC8560_ADS - bool "Freescale MPC8560 ADS" - help - This option enables support for the MPC 8560 ADS evaluation board. - -config SBC8560 - bool "WindRiver PowerQUICC III SBC8560" - help - This option enables support for the WindRiver PowerQUICC III - SBC8560 board. - -config STX_GP3 - bool "Silicon Turnkey Express GP3" - help - This option enables support for the Silicon Turnkey Express GP3 - board. - -config TQM8540 - bool "TQ Components TQM8540" - help - This option enables support for the TQ Components TQM8540 board. - -config TQM8541 - bool "TQ Components TQM8541" - help - This option enables support for the TQ Components TQM8541 board. - -config TQM8555 - bool "TQ Components TQM8555" - help - This option enables support for the TQ Components TQM8555 board. - -config TQM8560 - bool "TQ Components TQM8560" - help - This option enables support for the TQ Components TQM8560 board. - -endchoice - -# It's often necessary to know the specific 85xx processor type. -# Fortunately, it is implied (so far) from the board type, so we -# don't need to ask more redundant questions. -config MPC8540 - bool - depends on MPC8540_ADS || TQM8540 - default y - -config MPC8548 - bool - depends on MPC8548_CDS - default y - -config MPC8555 - bool - depends on MPC8555_CDS || TQM8541 || TQM8555 - default y - -config MPC8560 - bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560 - default y - -config 85xx_PCI2 - bool "Support for 2nd PCI host controller" - depends on MPC8555_CDS - default y - -config PPC_GEN550 - bool - depends on MPC8540 || SBC8560 || MPC8555 - default y - -endmenu diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile deleted file mode 100644 index 6c4753c144d3..000000000000 --- a/arch/ppc/platforms/85xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the PowerPC 85xx linux kernel. -# -obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o -obj-$(CONFIG_MPC8548_CDS) += mpc85xx_cds_common.o -obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o -obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o -obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o -obj-$(CONFIG_STX_GP3) += stx_gp3.o -obj-$(CONFIG_TQM8540) += tqm85xx.o -obj-$(CONFIG_TQM8541) += tqm85xx.o -obj-$(CONFIG_TQM8555) += tqm85xx.o -obj-$(CONFIG_TQM8560) += tqm85xx.o diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c deleted file mode 100644 index 00a3ba57063f..000000000000 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * MPC8540ADS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_setup.h> - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -mpc8540ads_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("mpc8540ads_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifdef CONFIG_SERIAL_8250 - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); - if (pdata) { - pdata->board_flags = 0; - pdata->bus_id = 0; - pdata->phy_id = 3; - memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } -#ifdef CONFIG_SERIAL_TEXT_DEBUG - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc8540ads_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; - - ppc_md.init_IRQ = mpc85xx_ads_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("mpc8540ads_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h deleted file mode 100644 index 7559f9e6fc28..000000000000 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MPC8540ADS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8540ADS_H__ -#define __MACH_MPC8540ADS_H__ - -#include <linux/initrd.h> -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_ads_common.h> - -#endif /* __MACH_MPC8540ADS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h deleted file mode 100644 index 4f79c372c4e7..000000000000 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * MPC8555CDS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8555CDS_H__ -#define __MACH_MPC8555CDS_H__ - -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_cds_common.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#endif /* __MACH_MPC8555CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c deleted file mode 100644 index 3a060468dd95..000000000000 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * MPC8560ADS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> -#include <linux/fs_enet_pd.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> -#include <mm/mmu_decl.h> - -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void init_fcc_ioports(void) -{ - struct immap *immap; - struct io_port *io; - u32 tempval; - - immap = cpm2_immr; - - io = &immap->im_ioport; - /* FCC2/3 are on the ports B/C. */ - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB2_DIRB0; - tempval |= PB2_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB2_PSORB0; - tempval |= PB2_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB2_DIRB0 | PB2_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB3_DIRB0; - tempval |= PB3_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB3_PSORB0; - tempval |= PB3_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB3_DIRB0 | PB3_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pdirc, tempval); - - tempval = in_be32(&io->iop_pparc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pparc, tempval); - - /* Port C has clocks...... */ - tempval = in_be32(&io->iop_psorc); - tempval &= ~(CLK_TRX); - out_be32(&io->iop_psorc, tempval); - - tempval = in_be32(&io->iop_pdirc); - tempval &= ~(CLK_TRX); - out_be32(&io->iop_pdirc, tempval); - tempval = in_be32(&io->iop_pparc); - tempval |= (CLK_TRX); - out_be32(&io->iop_pparc, tempval); - - /* Configure Serial Interface clock routing. - * First, clear all FCC bits to zero, - * then set the ones we want. - */ - immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); - immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; -} - -static void __init -mpc8560ads_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - struct fs_platform_info *fpi; - - cpm2_reset(); - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("mpc8560ads_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - init_fcc_ioports(); - ppc_sys_device_remove(MPC85xx_CPM_FCC1); - - fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); - if (fpi) { - memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); - fpi->bus_id = "0:02"; - fpi->phy_addr = 2; - fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; - fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; - } - - fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); - if (fpi) { - memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); - fpi->macaddr[5] += 1; - fpi->bus_id = "0:03"; - fpi->phy_addr = 3; - fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; - fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; - -static void __init -mpc8560_ads_init_IRQ(void) -{ - /* Setup OpenPIC */ - mpc85xx_ads_init_IRQ(); - - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); - - return; -} - - - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc8560ads_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; - - ppc_md.init_IRQ = mpc8560_ads_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - if (ppc_md.progress) - ppc_md.progress("mpc8560ads_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h deleted file mode 100644 index 9f185ab2e019..000000000000 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * MPC8540ADS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8560ADS_H -#define __MACH_MPC8560ADS_H - -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_ads_common.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) -#define PHY_INTERRUPT MPC85xx_IRQ_EXT7 - -#endif /* __MACH_MPC8560ADS_H */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c deleted file mode 100644 index 0706dca5a8ea..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * MPC85xx ADS board common routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/ppc_sys.h> - -#include <mm/mmu_decl.h> - -#include <platforms/85xx/mpc85xx_ads_common.h> - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ */ -int -mpc85xx_ads_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: mpc%sads\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -void __init -mpc85xx_ads_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = mpc85xx_ads_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (mpc85xx_ads_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - return; -} - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int -mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -extern void mpc85xx_rio_setup(int law_start, int law_size); -void platform_rio_init(void) -{ - /* 512MB RIO LAW at 0xc0000000 */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h deleted file mode 100644 index c8c322fe3680..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * MPC85XX ADS common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC85XX_ADS_H__ -#define __MACH_MPC85XX_ADS_H__ - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define BCSR_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(32 * 1024)) - -struct seq_file; - -extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); -extern void mpc85xx_ads_init_IRQ(void) __init; -extern void mpc85xx_ads_map_io(void) __init; - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* FCC1 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK9-12 */ -#define F1_RXCLK 12 -#define F1_TXCLK 11 - -/* FCC2 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F2_RXCLK 13 -#define F2_TXCLK 14 - -/* FCC3 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F3_RXCLK 15 -#define F3_TXCLK 16 - - -#endif /* __MACH_MPC85XX_ADS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c deleted file mode 100644 index 2d59eb776c95..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * MPC85xx CDS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/todc.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/i8259.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/cpm2.h> -#include <asm/ppc_sys.h> -#include <asm/kgdb.h> - -#include <mm/mmu_decl.h> -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -static int cds_pci_slot = 2; -static volatile u8 * cadmus; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - 0x0, /* External 4: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - -/* ************************************************************************ */ -int -mpc85xx_cds_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#ifdef CONFIG_CPM2 -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; -#endif /* CONFIG_CPM2 */ - -void __init -mpc85xx_cds_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - int i; - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); - - /* Skip reserved space and internal sources */ -#ifdef CONFIG_MPC8548 - openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200); -#else - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); -#endif - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - -#ifdef CONFIG_PCI - openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); - - i8259_init(0, 0); -#endif - -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); -#endif - - return; -} - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} - -#define ARCADIA_HOST_BRIDGE_IDSEL 17 -#define ARCADIA_2ND_BRIDGE_IDSEL 3 - -extern int mpc85xx_pci1_last_busno; - -int -mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#ifdef CONFIG_85xx_PCI2 - if (mpc85xx_pci1_last_busno) - if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#endif - /* We explicitly do not go past the Tundra 320 Bridge */ - if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) - return PCIBIOS_DEVICE_NOT_FOUND; - if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -void __init -mpc85xx_cds_enable_via(struct pci_controller *hose) -{ - u32 pci_class; - u16 vid, did; - - early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); - if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) - return; - - /* Configure P2P so that we can reach bus 1 */ - early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); - early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); - early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); - - early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); - early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); - - if ((vid != PCI_VENDOR_ID_VIA) || - (did != PCI_DEVICE_ID_VIA_82C686)) - return; - - /* Enable USB and IDE functions */ - early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); -} - -void __init -mpc85xx_cds_fixup_via(struct pci_controller *hose) -{ - u32 pci_class; - u16 vid, did; - - early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); - if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) - return; - - /* - * Force the backplane P2P bridge to have a window - * open from 0x00000000-0x00001fff in PCI I/O space. - * This allows legacy I/O (i8259, etc) on the VIA - * southbridge to be accessed. - */ - early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); - early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); - early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); - early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); - - early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); - early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); - if ((vid != PCI_VENDOR_ID_VIA) || - (did != PCI_DEVICE_ID_VIA_82C686)) - return; - - /* - * Since the P2P window was forced to cover the fixed - * legacy I/O addresses, it is necessary to manually - * place the base addresses for the IDE and USB functions - * within this window. - */ - /* Function 1, IDE */ - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); - - /* Function 2, USB ports 0-1 */ - early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); - - /* Function 3, USB ports 2-3 */ - early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); - - /* Function 5, Power Management */ - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); - - /* Function 6, AC97 Interface */ - early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); -} - -void __init -mpc85xx_cds_pcibios_fixup(void) -{ - struct pci_dev *dev; - u_char c; - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, NULL))) { - /* - * U-Boot does not set the enable bits - * for the IDE device. Force them on here. - */ - pci_read_config_byte(dev, 0x40, &c); - c |= 0x03; /* IDE: Chip Enable Bits */ - pci_write_config_byte(dev, 0x40, c); - - /* - * Since only primary interface works, force the - * IDE function to standard primary IDE interrupt - * w/ 8259 offset - */ - dev->irq = 14; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - pci_dev_put(dev); - } - - /* - * Force legacy USB interrupt routing - */ - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, NULL))) { - dev->irq = 10; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, dev))) { - dev->irq = 11; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); - } - pci_dev_put(dev); - } -} -#endif /* CONFIG_PCI */ - -TODC_ALLOC(); - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -mpc85xx_cds_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - printk("mpc85xx_cds_setup_arch\n"); - -#ifdef CONFIG_CPM2 - cpm2_reset(); -#endif - - cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); - cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; - printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot); - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_DS1743, - 0, - 0, - ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE), - 8); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* VIA IDE configuration */ - ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifdef CONFIG_SERIAL_8250 - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = PHY_POLL; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - ppc_sys_device_remove(MPC85xx_eTSEC3); - ppc_sys_device_remove(MPC85xx_eTSEC4); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#ifdef CONFIG_SERIAL_TEXT_DEBUG - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc85xx_cds_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo; - - ppc_md.init_IRQ = mpc85xx_cds_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("mpc85xx_cds_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h deleted file mode 100644 index 32c5455c8b82..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * MPC85xx CDS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC85XX_CDS_H__ -#define __MACH_MPC85XX_CDS_H__ - -#include <linux/serial.h> -#include <asm/ppcboot.h> -#include <linux/initrd.h> -#include <syslib/ppc85xx_setup.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -/* CADMUS info */ -#define CADMUS_BASE (0xf8004000) -#define CADMUS_SIZE (256) -#define CM_VER (0) -#define CM_CSR (1) -#define CM_RST (2) - -/* CDS NVRAM/RTC */ -#define CDS_RTC_ADDR (0xf8000000) -#define CDS_RTC_SIZE (8 * 1024) - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* PCI interrupt controller */ -#define PIRQ0A MPC85xx_IRQ_EXT0 -#define PIRQ0B MPC85xx_IRQ_EXT1 -#define PIRQ0C MPC85xx_IRQ_EXT2 -#define PIRQ0D MPC85xx_IRQ_EXT3 -#define PIRQ1A MPC85xx_IRQ_EXT11 - -/* PCI 1 memory map */ -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* PCI 2 memory map */ -/* Note: the standard PPC fixups will cause IO space to get bumped by - * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */ -#define MPC85XX_PCI2_LOWER_IO 0x00000000 -#define MPC85XX_PCI2_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI2_LOWER_MEM 0xa0000000 -#define MPC85XX_PCI2_UPPER_MEM 0xbfffffff - -#define MPC85XX_PCI2_IO_BASE 0xe3000000 -#define MPC85XX_PCI2_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI2_IO_SIZE 0x01000000 - -#define NR_8259_INTS 16 -#define CPM_IRQ_OFFSET NR_8259_INTS - -#endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c deleted file mode 100644 index 3d7addbdecfd..000000000000 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Wind River SBC8560 board specific routines - * - * Maintainer: Kumar Gala - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - -#ifdef CONFIG_SERIAL_8250 -static void __init -sbc8560_early_serial_map(void) -{ - struct uart_port uart_req; - - /* Setup serial port access */ - memset(&uart_req, 0, sizeof (uart_req)); - uart_req.irq = MPC85xx_IRQ_EXT9; - uart_req.flags = STD_COM_FLAGS; - uart_req.uartclk = BASE_BAUD * 16; - uart_req.iotype = UPIO_MEM; - uart_req.mapbase = UARTA_ADDR; - uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE); - uart_req.type = PORT_16650; - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - gen550_init(0, &uart_req); -#endif - - if (early_serial_setup(&uart_req) != 0) - printk("Early serial init of port 0 failed\n"); - - /* Assume early_serial_setup() doesn't modify uart_req */ - uart_req.line = 1; - uart_req.mapbase = UARTB_ADDR; - uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE); - uart_req.irq = MPC85xx_IRQ_EXT10; - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - gen550_init(1, &uart_req); -#endif - - if (early_serial_setup(&uart_req) != 0) - printk("Early serial init of port 1 failed\n"); -} -#endif - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -sbc8560_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("sbc8560_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif -#ifdef CONFIG_SERIAL_8250 - sbc8560_early_serial_map(); -#endif -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[25] = MPC85xx_IRQ_EXT6; - mdata->irq[26] = MPC85xx_IRQ_EXT7; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 25; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 26; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, UARTA_ADDR, - UARTA_ADDR, 0x1000, _PAGE_IO, 0); -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = sbc8560_setup_arch; - ppc_md.show_cpuinfo = sbc8560_show_cpuinfo; - - ppc_md.init_IRQ = sbc8560_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = sbc8560_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("sbc8560_init(): exit", 0); -} diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h deleted file mode 100644 index e5e156f60100..000000000000 --- a/arch/ppc/platforms/85xx/sbc8560.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Wind River SBC8560 board definitions - * - * Copyright 2003 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_SBC8560_H__ -#define __MACH_SBC8560_H__ - -#include <platforms/85xx/sbc85xx.h> -#include <asm/irq.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -#define BASE_BAUD ( 1843200 / 16 ) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_SKIP_TEST) -#endif - -#define STD_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0 */ \ - iomem_base: (u8 *)UARTA_ADDR, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1 */ \ - iomem_base: (u8 *)UARTB_ADDR, \ - io_type: SERIAL_IO_MEM }, - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DFNS - -#endif /* __MACH_SBC8560_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c deleted file mode 100644 index 2c587ca97bce..000000000000 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * WindRiver PowerQUICC III SBC85xx board common routines - * - * Copyright 2002, 2003 Motorola Inc. - * Copyright 2004 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/ppc_sys.h> - -#include <mm/mmu_decl.h> - -#include <platforms/85xx/sbc85xx.h> - -unsigned char __res[sizeof (bd_t)]; - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -unsigned long pci_dram_offset = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char sbc8560_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ - 0x0, /* External 1: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot 3 */ -#else - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ */ -int -sbc8560_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -void __init -sbc8560_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = sbc8560_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - return; -} - -/* - * interrupt routing - */ - -#ifdef CONFIG_PCI -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, - }; - - const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h deleted file mode 100644 index 51df4dc04e22..000000000000 --- a/arch/ppc/platforms/85xx/sbc85xx.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * WindRiver PowerQUICC III SBC85xx common board definitions - * - * Copyright 2003 Motorola Inc. - * Copyright 2004 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __PLATFORMS_85XX_SBC85XX_H__ -#define __PLATFORMS_85XX_SBC85XX_H__ - -#include <linux/init.h> -#include <linux/seq_file.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xff700000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define BCSR_ADDR ((uint)0xfc000000) -#define BCSR_SIZE ((uint)(16 * 1024 * 1024)) - -#define UARTA_ADDR (BCSR_ADDR + 0x00700000) -#define UARTB_ADDR (BCSR_ADDR + 0x00800000) -#define RTC_DEVICE_ADDR (BCSR_ADDR + 0x00900000) -#define EEPROM_ADDR (BCSR_ADDR + 0x00b00000) - -extern int sbc8560_show_cpuinfo(struct seq_file *m); -extern void sbc8560_init_IRQ(void) __init; - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* FCC1 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK9-12 */ -#define F1_RXCLK 12 -#define F1_TXCLK 11 - -/* FCC2 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F2_RXCLK 13 -#define F2_TXCLK 14 - -/* FCC3 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F3_RXCLK 15 -#define F3_TXCLK 16 - -#endif /* __PLATFORMS_85XX_SBC85XX_H__ */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c deleted file mode 100644 index 8748da3b3e0e..000000000000 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * STx GP3 board specific routines - * - * Dan Malek <dan@embeddededge.com> - * Copyright 2004 Embedded Edge, LLC - * - * Copied from mpc8560_ads.c - * Copyright 2002, 2003 Motorola Inc. - * - * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/blkdev.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/root_dev.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> -#include <linux/interrupt.h> -#include <linux/rio.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/cpm2.h> -#include <asm/ppc_sys.h> - -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> - - -unsigned char __res[sizeof(bd_t)]; - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -unsigned long pci_dram_offset = 0; -#endif - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u8 gp3_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* - * Setup the architecture - */ -static void __init -gp3_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - cpm2_reset(); - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("gp3_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[2] = MPC85xx_IRQ_EXT5; - mdata->irq[4] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->bus_id = 0; - pdata->phy_id = 2; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->bus_id = 0; - pdata->phy_id = 4; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - - printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base); -} - -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; - -static void __init -gp3_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - - /* - * Setup OpenPIC - */ - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = gp3_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* - * Let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); - - return; -} - -static int -gp3_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - bd_t *binfo = (bd_t *) __res; - uint memsize; - unsigned int freq; - extern unsigned long total_memory; /* in mm/init */ - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - memsize = total_memory; - - seq_printf(m, "Vendor\t\t: RPC Electronics STx \n"); - seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000, - freq % 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#ifdef CONFIG_PCI -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, - }; - - const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -extern void mpc85xx_rio_setup(int law_start, int law_size); -void -platform_rio_init(void) -{ - /* - * The STx firmware configures the RapidIO Local Access Window - * at 0xc0000000 with a size of 512MB. - */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = gp3_setup_arch; - ppc_md.show_cpuinfo = gp3_show_cpuinfo; - - ppc_md.init_IRQ = gp3_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - if (ppc_md.progress) - ppc_md.progress("platform_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h deleted file mode 100644 index c6e34c09e979..000000000000 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * STx GP3 board definitions - * - * Dan Malek (dan@embeddededge.com) - * Copyright 2004 Embedded Edge, LLC - * - * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_STX_GP3_H -#define __MACH_STX_GP3_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#define BCSR_ADDR ((uint)0xfc000000) -#define BCSR_SIZE ((uint)(16 * 1024)) - -#define BCSR_TSEC1_RESET 0x00000080 -#define BCSR_TSEC2_RESET 0x00000040 -#define BCSR_LED1 0x00000008 -#define BCSR_LED2 0x00000004 -#define BCSR_LED3 0x00000002 -#define BCSR_LED4 0x00000001 - -extern void mpc85xx_setup_hose(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_init_IRQ(void) __init; -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; - -#define PCI_CFG_ADDR_OFFSET (0x8000) -#define PCI_CFG_DATA_OFFSET (0x8004) - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 -#define PCI_MIN_IDSEL 16 -#define PCI_MAX_IDSEL 19 -#define PCI_IRQ_SLOT 4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -#endif /* __MACH_STX_GP3_H */ diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c deleted file mode 100644 index 2a863a83d4c8..000000000000 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * TQM85xx (40/41/55/60) board specific routines - * - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * Based on original work by - * Kumar Gala <galak@kernel.crashing.org> - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_setup.h> -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char tqm85xx_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ - 0x0, /* External 1: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ -#else - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -tqm85xx_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - -#ifdef CONFIG_MPC8560 - cpm2_reset(); -#endif - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("tqm85xx_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifndef CONFIG_MPC8560 -#if defined(CONFIG_SERIAL_8250) - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif -#endif /* CONFIG_MPC8560 */ - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT8; - mdata->irq[1] = MPC85xx_IRQ_EXT8; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT8; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 2; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_MPC8540 - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); - if (pdata) { - pdata->board_flags = 0; - pdata->bus_id = 0; - pdata->phy_id = 3; - memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); - } -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -#ifdef CONFIG_MPC8560 -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; -#endif /* CONFIG_MPC8560 */ - -void __init -tqm85xx_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = tqm85xx_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - -#ifdef CONFIG_MPC8560 - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); -#endif /* CONFIG_MPC8560 */ - - return; -} - -int tqm85xx_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: TQ Components\n"); - seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) -extern ulong ds1337_get_rtc_time(void); -extern int ds1337_set_rtc_time(unsigned long nowtime); - -static int __init -tqm85xx_rtc_hookup(void) -{ - struct timespec tv; - - ppc_md.set_rtc_time = ds1337_set_rtc_time; - ppc_md.get_rtc_time = ds1337_get_rtc_time; - - tv.tv_nsec = 0; - tv.tv_sec = (ppc_md.get_rtc_time)(); - do_settimeofday(&tv); - - return 0; -} -late_initcall(tqm85xx_rtc_hookup); -#endif - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, 0, 0}, - }; - - const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -extern void mpc85xx_rio_setup(int law_start, int law_size); -void platform_rio_init(void) -{ - /* 512MB RIO LAW at 0xc0000000 */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = tqm85xx_setup_arch; - ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; - - ppc_md.init_IRQ = tqm85xx_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#ifndef CONFIG_MPC8560 -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ -#endif /* CONFIG_MPC8560 */ - - if (ppc_md.progress) - ppc_md.progress("tqm85xx_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h deleted file mode 100644 index 57284e68f676..000000000000 --- a/arch/ppc/platforms/85xx/tqm85xx.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * TQM85xx (40/41/55/60) board definitions - * - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_TQM85XX_H -#define __MACH_TQM85XX_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#define PCI_CFG_ADDR_OFFSET (0x8000) -#define PCI_CFG_DATA_OFFSET (0x8004) - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT2 -#define PIRQB MPC85xx_IRQ_EXT3 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -#define BASE_BAUD 115200 - -extern void mpc85xx_setup_hose(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_init_IRQ(void) __init; -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; - -#endif /* __MACH_TQM85XX_H */ diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 4d158f3bd474..52ddebe6c6d1 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -87,14 +87,6 @@ endif obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o ppc_sys.o obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o -obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ - mpc85xx_devices.o -ifeq ($(CONFIG_85xx),y) -obj-$(CONFIG_PCI) += pci_auto.o -endif -obj-$(CONFIG_MPC8548_CDS) += todc_time.o -obj-$(CONFIG_MPC8555_CDS) += todc_time.o obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \ mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o ifeq ($(CONFIG_PPC_MPC52xx),y) diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c deleted file mode 100644 index 325136e5aee0..000000000000 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ /dev/null @@ -1,826 +0,0 @@ -/* - * MPC85xx Device descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include <linux/fsl_devices.h> -#include <linux/fs_enet_pd.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> - -/* We use offsets for IORESOURCE_MEM since we do not know at compile time - * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup - */ -struct gianfar_mdio_data mpc85xx_mdio_pdata = { -}; - -static struct gianfar_platform_data mpc85xx_tsec1_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct gianfar_platform_data mpc85xx_tsec2_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct gianfar_platform_data mpc85xx_etsec1_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec2_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec3_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec4_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_fec_pdata = { - .device_flags = 0, -}; - -static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct fs_platform_info mpc85xx_fcc1_pdata = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX1_CLK_MASK, - .clk_route = CMX1_CLK_ROUTE, - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - - .mem_offset = FCC1_MEM_OFFSET, -}; - -static struct fs_platform_info mpc85xx_fcc2_pdata = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX2_CLK_MASK, - .clk_route = CMX2_CLK_ROUTE, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - - .mem_offset = FCC2_MEM_OFFSET, -}; - -static struct fs_platform_info mpc85xx_fcc3_pdata = { - .fs_no = fsid_fcc3, - .cp_page = CPM_CR_FCC3_PAGE, - .cp_block = CPM_CR_FCC3_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX3_CLK_MASK, - .clk_route = CMX3_CLK_ROUTE, - .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), - - .mem_offset = FCC3_MEM_OFFSET, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - [0] = { - .mapbase = 0x4500, - .irq = MPC85xx_IRQ_DUART, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, - }, - [1] = { - .mapbase = 0x4600, - .irq = MPC85xx_IRQ_DUART, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, - }, - { }, -}; - -struct platform_device ppc_sys_platform_devices[] = { - [MPC85xx_TSEC1] = { - .name = "fsl-gianfar", - .id = 1, - .dev.platform_data = &mpc85xx_tsec1_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET1_OFFSET, - .end = MPC85xx_ENET1_OFFSET + - MPC85xx_ENET1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC1_TX, - .end = MPC85xx_IRQ_TSEC1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC1_RX, - .end = MPC85xx_IRQ_TSEC1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC1_ERROR, - .end = MPC85xx_IRQ_TSEC1_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_TSEC2] = { - .name = "fsl-gianfar", - .id = 2, - .dev.platform_data = &mpc85xx_tsec2_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET2_OFFSET, - .end = MPC85xx_ENET2_OFFSET + - MPC85xx_ENET2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC2_TX, - .end = MPC85xx_IRQ_TSEC2_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC2_RX, - .end = MPC85xx_IRQ_TSEC2_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC2_ERROR, - .end = MPC85xx_IRQ_TSEC2_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_FEC] = { - .name = "fsl-gianfar", - .id = 3, - .dev.platform_data = &mpc85xx_fec_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET3_OFFSET, - .end = MPC85xx_ENET3_OFFSET + - MPC85xx_ENET3_SIZE - 1, - .flags = IORESOURCE_MEM, - - }, - { - .start = MPC85xx_IRQ_FEC, - .end = MPC85xx_IRQ_FEC, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_IIC1] = { - .name = "fsl-i2c", - .id = 1, - .dev.platform_data = &mpc85xx_fsl_i2c_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_IIC1_OFFSET, - .end = MPC85xx_IIC1_OFFSET + - MPC85xx_IIC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_IIC1, - .end = MPC85xx_IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA0] = { - .name = "fsl-dma", - .id = 0, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA0_OFFSET, - .end = MPC85xx_DMA0_OFFSET + - MPC85xx_DMA0_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA0, - .end = MPC85xx_IRQ_DMA0, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA1] = { - .name = "fsl-dma", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA1_OFFSET, - .end = MPC85xx_DMA1_OFFSET + - MPC85xx_DMA1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA1, - .end = MPC85xx_IRQ_DMA1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA2] = { - .name = "fsl-dma", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA2_OFFSET, - .end = MPC85xx_DMA2_OFFSET + - MPC85xx_DMA2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA2, - .end = MPC85xx_IRQ_DMA2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA3] = { - .name = "fsl-dma", - .id = 3, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA3_OFFSET, - .end = MPC85xx_DMA3_OFFSET + - MPC85xx_DMA3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA3, - .end = MPC85xx_IRQ_DMA3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DUART] = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = serial_platform_data, - }, - [MPC85xx_PERFMON] = { - .name = "fsl-perfmon", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_PERFMON_OFFSET, - .end = MPC85xx_PERFMON_OFFSET + - MPC85xx_PERFMON_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_PERFMON, - .end = MPC85xx_IRQ_PERFMON, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_SEC2] = { - .name = "fsl-sec2", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_SEC2_OFFSET, - .end = MPC85xx_SEC2_OFFSET + - MPC85xx_SEC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_SEC2, - .end = MPC85xx_IRQ_SEC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC1] = { - .name = "fsl-cpm-fcc", - .id = 1, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc1_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91300, - .end = 0x9131F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x91380, - .end = 0x9139F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88400, - .end = 0x884ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC1, - .end = SIU_INT_FCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC2] = { - .name = "fsl-cpm-fcc", - .id = 2, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc2_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91320, - .end = 0x9133F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x913A0, - .end = 0x913CF, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88500, - .end = 0x885ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC2, - .end = SIU_INT_FCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC3] = { - .name = "fsl-cpm-fcc", - .id = 3, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc3_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91340, - .end = 0x9135F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x913D0, - .end = 0x913FF, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88600, - .end = 0x886ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC3, - .end = SIU_INT_FCC3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_I2C] = { - .name = "fsl-cpm-i2c", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91860, - .end = 0x918BF, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_I2C, - .end = SIU_INT_I2C, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC1] = { - .name = "fsl-cpm-scc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A00, - .end = 0x91A1F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC1, - .end = SIU_INT_SCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC2] = { - .name = "fsl-cpm-scc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A20, - .end = 0x91A3F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC2, - .end = SIU_INT_SCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC3] = { - .name = "fsl-cpm-scc", - .id = 3, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A40, - .end = 0x91A5F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC3, - .end = SIU_INT_SCC3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC4] = { - .name = "fsl-cpm-scc", - .id = 4, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A60, - .end = 0x91A7F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC4, - .end = SIU_INT_SCC4, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SPI] = { - .name = "fsl-cpm-spi", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91AA0, - .end = 0x91AFF, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SPI, - .end = SIU_INT_SPI, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_MCC1] = { - .name = "fsl-cpm-mcc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B30, - .end = 0x91B3F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_MCC1, - .end = SIU_INT_MCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_MCC2] = { - .name = "fsl-cpm-mcc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B50, - .end = 0x91B5F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_MCC2, - .end = SIU_INT_MCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SMC1] = { - .name = "fsl-cpm-smc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A80, - .end = 0x91A8F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SMC1, - .end = SIU_INT_SMC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SMC2] = { - .name = "fsl-cpm-smc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A90, - .end = 0x91A9F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SMC2, - .end = SIU_INT_SMC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_USB] = { - .name = "fsl-cpm-usb", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B60, - .end = 0x91B7F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_USB, - .end = SIU_INT_USB, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC1] = { - .name = "fsl-gianfar", - .id = 1, - .dev.platform_data = &mpc85xx_etsec1_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET1_OFFSET, - .end = MPC85xx_ENET1_OFFSET + - MPC85xx_ENET1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC1_TX, - .end = MPC85xx_IRQ_TSEC1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC1_RX, - .end = MPC85xx_IRQ_TSEC1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC1_ERROR, - .end = MPC85xx_IRQ_TSEC1_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC2] = { - .name = "fsl-gianfar", - .id = 2, - .dev.platform_data = &mpc85xx_etsec2_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET2_OFFSET, - .end = MPC85xx_ENET2_OFFSET + - MPC85xx_ENET2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC2_TX, - .end = MPC85xx_IRQ_TSEC2_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC2_RX, - .end = MPC85xx_IRQ_TSEC2_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC2_ERROR, - .end = MPC85xx_IRQ_TSEC2_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC3] = { - .name = "fsl-gianfar", - .id = 3, - .dev.platform_data = &mpc85xx_etsec3_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET3_OFFSET, - .end = MPC85xx_ENET3_OFFSET + - MPC85xx_ENET3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC3_TX, - .end = MPC85xx_IRQ_TSEC3_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC3_RX, - .end = MPC85xx_IRQ_TSEC3_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC3_ERROR, - .end = MPC85xx_IRQ_TSEC3_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC4] = { - .name = "fsl-gianfar", - .id = 4, - .dev.platform_data = &mpc85xx_etsec4_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = 0x27000, - .end = 0x27fff, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC4_TX, - .end = MPC85xx_IRQ_TSEC4_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC4_RX, - .end = MPC85xx_IRQ_TSEC4_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC4_ERROR, - .end = MPC85xx_IRQ_TSEC4_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_IIC2] = { - .name = "fsl-i2c", - .id = 2, - .dev.platform_data = &mpc85xx_fsl_i2c2_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x03100, - .end = 0x031ff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_IIC1, - .end = MPC85xx_IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_MDIO] = { - .name = "fsl-gianfar_mdio", - .id = 0, - .dev.platform_data = &mpc85xx_mdio_pdata, - .num_resources = 1, - .resource = (struct resource[]) { - { - .start = 0x24520, - .end = 0x2453f, - .flags = IORESOURCE_MEM, - }, - }, - }, -}; - -static int __init mach_mpc85xx_fixup(struct platform_device *pdev) -{ - ppc_sys_fixup_mem_resource(pdev, CCSRBAR); - return 0; -} - -static int __init mach_mpc85xx_init(void) -{ - ppc_sys_device_fixup = mach_mpc85xx_fixup; - return 0; -} - -postcore_initcall(mach_mpc85xx_init); diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c deleted file mode 100644 index d96a93dbcb5a..000000000000 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * MPC85xx System descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <asm/ppc_sys.h> - -struct ppc_sys_spec *cur_ppc_sys_spec; -struct ppc_sys_spec ppc_sys_specs[] = { - { - .ppc_sys_name = "8540", - .mask = 0xFFFF0000, - .value = 0x80300000, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8560", - .mask = 0xFFFF0000, - .value = 0x80700000, - .num_devices = 20, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3, - MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8541", - .mask = 0xFFFF0000, - .value = 0x80720000, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8541E", - .mask = 0xFFFF0000, - .value = 0x807A0000, - .num_devices = 15, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8555", - .mask = 0xFFFF0000, - .value = 0x80710000, - .num_devices = 20, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2, - MPC85xx_CPM_USB, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8555E", - .mask = 0xFFFF0000, - .value = 0x80790000, - .num_devices = 21, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2, - MPC85xx_CPM_USB, - MPC85xx_MDIO, - }, - }, - /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */ - { - .ppc_sys_name = "8548E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8548", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 13, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8547E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8547", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 13, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8545E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 12, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8545", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8543E", - .mask = 0xFFFF00F0, - .value = 0x803A0010, - .num_devices = 12, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8543", - .mask = 0xFFFF00F0, - .value = 0x80320010, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { /* default match */ - .ppc_sys_name = "", - .mask = 0x00000000, - .value = 0x00000000, - }, -}; diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index d42d4085dc81..ac80370ed2f7 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -20,7 +20,7 @@ * of peripherals are found on embedded SoC (System On a Chip) * processors or highly integrated system controllers that have * a host bridge and many peripherals. Common examples where - * this is already used include the PPC4xx, PPC85xx, MPC52xx, + * this is already used include the PPC4xx, MPC52xx, * and MV64xxx parts. * * This subsystem creates a standard OCP bus type within the diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index 18ec94733293..780a3b9b4fe9 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -24,7 +24,7 @@ #include "open_pic_defs.h" -#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx) +#if defined(CONFIG_PRPMC800) #define OPENPIC_BIG_ENDIAN #endif diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c deleted file mode 100644 index e5ac699e7316..000000000000 --- a/arch/ppc/syslib/ppc85xx_common.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * MPC85xx support routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/mpc85xx.h> -#include <asm/mmu.h> - -/* ************************************************************************ */ -/* Return the value of CCSRBAR for the current board */ - -phys_addr_t -get_ccsrbar(void) -{ - return BOARD_CCSRBAR; -} - -EXPORT_SYMBOL(get_ccsrbar); - -/* For now this is a pass through */ -phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) -{ - return addr; -}; -EXPORT_SYMBOL(fixup_bigphys_addr); - diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h deleted file mode 100644 index 4fc405425113..000000000000 --- a/arch/ppc/syslib/ppc85xx_common.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MPC85xx support routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_COMMON_H -#define __PPC_SYSLIB_PPC85XX_COMMON_H - -#include <linux/init.h> - -/* Provide access to ccsrbar for any modules, etc */ -phys_addr_t get_ccsrbar(void); - -#endif /* __PPC_SYSLIB_PPC85XX_COMMON_H */ diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c deleted file mode 100644 index 2475ec6600fe..000000000000 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * MPC85XX common board code - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> - -#include <asm/time.h> -#include <asm/mpc85xx.h> -#include <asm/immap_85xx.h> -#include <asm/mmu.h> -#include <asm/ppc_sys.h> -#include <asm/kgdb.h> -#include <asm/machdep.h> - -#include <syslib/ppc85xx_setup.h> - -extern void abort(void); - -/* Return the amount of memory */ -unsigned long __init -mpc85xx_find_end_of_memory(void) -{ - bd_t *binfo; - - binfo = (bd_t *) __res; - - return binfo->bi_memsize; -} - -/* The decrementer counts at the system (internal) clock freq divided by 8 */ -void __init -mpc85xx_calibrate_decr(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq, divisor; - - /* get the core frequency */ - freq = binfo->bi_busfreq; - - /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */ - divisor = 8; - tb_ticks_per_jiffy = freq / divisor / HZ; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -} - -#ifdef CONFIG_SERIAL_8250 -void __init -mpc85xx_early_serial_map(void) -{ -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - struct uart_port serial_req; -#endif - struct plat_serial8250_port *pdata; - bd_t *binfo = (bd_t *) __res; - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART); - - /* Setup serial port access */ - pdata[0].uartclk = binfo->bi_busfreq; - pdata[0].mapbase += binfo->bi_immr_base; - pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = UPIO_MEM; - serial_req.mapbase = pdata[0].mapbase; - serial_req.membase = pdata[0].membase; - serial_req.regshift = 0; - - gen550_init(0, &serial_req); -#endif - - pdata[1].uartclk = binfo->bi_busfreq; - pdata[1].mapbase += binfo->bi_immr_base; - pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - /* Assume gen550_init() doesn't modify serial_req */ - serial_req.mapbase = pdata[1].mapbase; - serial_req.membase = pdata[1].membase; - - gen550_init(1, &serial_req); -#endif -} -#endif - -void -mpc85xx_restart(char *cmd) -{ - local_irq_disable(); - abort(); -} - -void -mpc85xx_power_off(void) -{ - local_irq_disable(); - for(;;); -} - -void -mpc85xx_halt(void) -{ - local_irq_disable(); - for(;;); -} - -#ifdef CONFIG_PCI - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) -extern void mpc85xx_cds_enable_via(struct pci_controller *hose); -extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); -#endif - -static void __init -mpc85xx_setup_pci1(struct pci_controller *hose) -{ - volatile struct ccsr_pci *pci; - volatile struct ccsr_guts *guts; - unsigned short temps; - bd_t *binfo = (bd_t *) __res; - - pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET, - MPC85xx_PCI1_SIZE); - - guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET, - MPC85xx_GUTS_SIZE); - - early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps); - temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, 0, 0, PCI_COMMAND, temps); - -#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ - if (guts->pordevsr & PORDEVSR_PCI) { - early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); - } else { - /* PCI-X init */ - temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ - | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; - early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps); - } - - /* Disable all windows (except powar0 since its ignored) */ - pci->powar1 = 0; - pci->powar2 = 0; - pci->powar3 = 0; - pci->powar4 = 0; - pci->piwar1 = 0; - pci->piwar2 = 0; - pci->piwar3 = 0; - - /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */ - pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; - pci->potear1 = 0x00000000; - pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; - /* Enable, Mem R/W */ - pci->powar1 = 0x80044000 | - (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1); - - /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */ - pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff; - pci->potear2 = 0x00000000; - pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff; - /* Enable, IO R/W */ - pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1); - - /* Setup 2G inbound Memory Window @ 0 */ - pci->pitar1 = 0x00000000; - pci->piwbar1 = 0x00000000; - pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local - Mem, Snoop R/W, 2G */ -} - - -extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin); -extern int mpc85xx_exclude_device(u_char bus, u_char devfn); - -#ifdef CONFIG_85xx_PCI2 -static void __init -mpc85xx_setup_pci2(struct pci_controller *hose) -{ - volatile struct ccsr_pci *pci; - unsigned short temps; - bd_t *binfo = (bd_t *) __res; - - pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET, - MPC85xx_PCI2_SIZE); - - early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps); - temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps); - early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80); - - /* Disable all windows (except powar0 since its ignored) */ - pci->powar1 = 0; - pci->powar2 = 0; - pci->powar3 = 0; - pci->powar4 = 0; - pci->piwar1 = 0; - pci->piwar2 = 0; - pci->piwar3 = 0; - - /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */ - pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; - pci->potear1 = 0x00000000; - pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; - /* Enable, Mem R/W */ - pci->powar1 = 0x80044000 | - (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1); - - /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */ - pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff; - pci->potear2 = 0x00000000; - pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; - /* Enable, IO R/W */ - pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1); - - /* Setup 2G inbound Memory Window @ 0 */ - pci->pitar1 = 0x00000000; - pci->piwbar1 = 0x00000000; - pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local - Mem, Snoop R/W, 2G */ -} -#endif /* CONFIG_85xx_PCI2 */ - -int mpc85xx_pci1_last_busno = 0; - -void __init -mpc85xx_setup_hose(void) -{ - struct pci_controller *hose_a; -#ifdef CONFIG_85xx_PCI2 - struct pci_controller *hose_b; -#endif - bd_t *binfo = (bd_t *) __res; - - hose_a = pcibios_alloc_controller(); - - if (!hose_a) - return; - - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; - - hose_a->first_busno = 0; - hose_a->bus_offset = 0; - hose_a->last_busno = 0xff; - - setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); - hose_a->set_cfg_type = 1; - - mpc85xx_setup_pci1(hose_a); - - hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET; - hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM; - hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM; - - hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO; - hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO; - hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE; -#ifdef CONFIG_85xx_PCI2 - hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE, - MPC85XX_PCI1_IO_SIZE + - MPC85XX_PCI2_IO_SIZE); -#else - hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE, - MPC85XX_PCI1_IO_SIZE); -#endif - isa_io_base = (unsigned long)hose_a->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose_a->mem_resources[0], - MPC85XX_PCI1_LOWER_MEM, - MPC85XX_PCI1_UPPER_MEM, - IORESOURCE_MEM, "PCI1 host bridge"); - - pci_init_resource(&hose_a->io_resource, - MPC85XX_PCI1_LOWER_IO, - MPC85XX_PCI1_UPPER_IO, - IORESOURCE_IO, "PCI1 host bridge"); - - ppc_md.pci_exclude_device = mpc85xx_exclude_device; - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) - /* Pre pciauto_bus_scan VIA init */ - mpc85xx_cds_enable_via(hose_a); -#endif - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) - /* Post pciauto_bus_scan VIA fixup */ - mpc85xx_cds_fixup_via(hose_a); -#endif - -#ifdef CONFIG_85xx_PCI2 - hose_b = pcibios_alloc_controller(); - - if (!hose_b) - return; - - hose_b->bus_offset = hose_a->last_busno + 1; - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - - setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); - hose_b->set_cfg_type = 1; - - mpc85xx_setup_pci2(hose_b); - - hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET; - hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM; - hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM; - - hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO; - hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO; - hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE; - hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE; - - /* setup resources */ - pci_init_resource(&hose_b->mem_resources[0], - MPC85XX_PCI2_LOWER_MEM, - MPC85XX_PCI2_UPPER_MEM, - IORESOURCE_MEM, "PCI2 host bridge"); - - pci_init_resource(&hose_b->io_resource, - MPC85XX_PCI2_LOWER_IO, - MPC85XX_PCI2_UPPER_IO, - IORESOURCE_IO, "PCI2 host bridge"); - - hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno); - - /* let board code know what the last bus number was on PCI1 */ - mpc85xx_pci1_last_busno = hose_a->last_busno; -#endif - return; -} -#endif /* CONFIG_PCI */ - - diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h deleted file mode 100644 index 6ff79995210b..000000000000 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * MPC85XX common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __PPC_SYSLIB_PPC85XX_SETUP_H -#define __PPC_SYSLIB_PPC85XX_SETUP_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; -extern void mpc85xx_early_serial_map(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_setup_hose(void) __init; - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* Additional register for PCI-X configuration */ -#define PCIX_NEXT_CAP 0x60 -#define PCIX_CAP_ID 0x61 -#define PCIX_COMMAND 0x62 -#define PCIX_STATUS 0x64 - -/* Serial Config */ -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -#ifndef BASE_BAUD -#define BASE_BAUD 115200 -#endif - -/* Offset of CPM register space */ -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#endif /* __PPC_SYSLIB_PPC85XX_SETUP_H */ |