diff options
Diffstat (limited to 'arch/ppc')
| -rw-r--r-- | arch/ppc/kernel/head_44x.S | 12 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ebony.c | 6 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ebony.h | 13 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ocotea.c | 4 | ||||
| -rw-r--r-- | arch/ppc/platforms/4xx/ocotea.h | 13 |
5 files changed, 37 insertions, 11 deletions
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 6c7ae6052464..72ee8f33bde4 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -179,14 +179,14 @@ skpinv: addi r4,r4,1 /* Increment */ 4: #ifdef CONFIG_SERIAL_TEXT_DEBUG /* - * Add temporary UART mapping for early debug. This - * mapping must be identical to that used by the early - * bootloader code since the same asm/serial.h parameters - * are used for polled operation. + * Add temporary UART mapping for early debug. + * We can map UART registers wherever we want as long as they don't + * interfere with other system mappings (e.g. with pinned entries). + * For an example of how we handle this - see ocotea.h. --ebs */ /* pageid fields */ lis r3,UART0_IO_BASE@h - ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M + ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K /* xlat fields */ lis r4,UART0_PHYS_IO_BASE@h /* RPN depends on SoC */ @@ -196,7 +196,7 @@ skpinv: addi r4,r4,1 /* Increment */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,1 /* TLB slot 1 */ + li r0,0 /* TLB slot 0 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c index cd11734ef7c5..509e69a095f0 100644 --- a/arch/ppc/platforms/4xx/ebony.c +++ b/arch/ppc/platforms/4xx/ebony.c @@ -7,7 +7,7 @@ * Copyright 2002-2005 MontaVista Software Inc. * * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> - * Copyright (c) 2003, 2004 Zultys Technologies + * Copyright (c) 2003-2005 Zultys Technologies * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -50,6 +50,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gp_common.h> @@ -248,6 +249,9 @@ ebony_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GP_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h index 47c391c9174d..d08faa46a0ae 100644 --- a/arch/ppc/platforms/4xx/ebony.h +++ b/arch/ppc/platforms/4xx/ebony.h @@ -56,9 +56,18 @@ * Serial port defines */ -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif /* external Epson SG-615P */ #define BASE_BAUD 691200 @@ -66,7 +75,7 @@ #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 5f82a6bc7046..8fc34a344769 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -48,6 +48,7 @@ #include <asm/bootinfo.h> #include <asm/ppc4xx_pic.h> #include <asm/ppcboot.h> +#include <asm/tlbflush.h> #include <syslib/gen550.h> #include <syslib/ibm440gx_common.h> @@ -266,6 +267,9 @@ ocotea_early_serial_map(void) #if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) /* Configure debug serial access */ gen550_init(0, &port); + + /* Purge TLB entry added in head_44x.S for early serial access */ + _tlbie(UART0_IO_BASE); #endif port.membase = ioremap64(PPC440GX_UART1_ADDR, 8); diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h index 202dc8251190..33251153ac5f 100644 --- a/arch/ppc/platforms/4xx/ocotea.h +++ b/arch/ppc/platforms/4xx/ocotea.h @@ -55,15 +55,24 @@ */ #define RS_TABLE_SIZE 2 -/* OpenBIOS defined UART mappings, used before early_serial_setup */ +#if defined(__BOOTER__) +/* OpenBIOS defined UART mappings, used by bootloader shim */ #define UART0_IO_BASE 0xE0000200 #define UART1_IO_BASE 0xE0000300 +#else +/* head_44x.S created UART mapping, used before early_serial_setup. + * We cannot use default OpenBIOS UART mappings because they + * don't work for configurations with more than 512M RAM. --ebs + */ +#define UART0_IO_BASE 0xF0000200 +#define UART1_IO_BASE 0xF0000300 +#endif #define BASE_BAUD 11059200/16 #define STD_UART_OP(num) \ { 0, BASE_BAUD, 0, UART##num##_INT, \ (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \ - iomem_base: UART##num##_IO_BASE, \ + iomem_base: (void*)UART##num##_IO_BASE, \ io_type: SERIAL_IO_MEM}, #define SERIAL_PORT_DFNS \ |