summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib/open_pic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/open_pic.c')
-rw-r--r--arch/ppc/syslib/open_pic.c1087
1 files changed, 0 insertions, 1087 deletions
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
deleted file mode 100644
index 67dffe27b5c3..000000000000
--- a/arch/ppc/syslib/open_pic.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- * Copyright (C) 1997 Geert Uytterhoeven
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-#if defined(CONFIG_PRPMC800)
-#define OPENPIC_BIG_ENDIAN
-#endif
-
-void __iomem *OpenPIC_Addr;
-static volatile struct OpenPIC __iomem *OpenPIC = NULL;
-
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-u_int OpenPIC_NumInitSenses __initdata = 0;
-u_char *OpenPIC_InitSenses __initdata = NULL;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic_irq_offset;
-static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
-static int openpic_cascade_irq = -1;
-static int (*openpic_cascade_fn)(void);
-
-/* Global Operations */
-static void openpic_disable_8259_pass_through(void);
-static void openpic_set_spurious(u_int vector);
-
-#ifdef CONFIG_SMP
-/* Interprocessor Interrupts */
-static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id);
-#endif
-
-/* Timer Interrupts */
-static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic_maptimer(u_int timer, cpumask_t cpumask);
-
-/* Interrupt Sources */
-static void openpic_enable_irq(u_int irq);
-static void openpic_disable_irq(u_int irq);
-static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
- int is_level);
-static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-#ifdef notused
-static void openpic_enable_8259_pass_through(void);
-static u_int openpic_get_spurious(void);
-static void openpic_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic_end_irq(unsigned int irq_nr);
-static void openpic_ack_irq(unsigned int irq_nr);
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-struct hw_interrupt_type open_pic = {
- .typename = " OpenPIC ",
- .enable = openpic_enable_irq,
- .disable = openpic_disable_irq,
- .ack = openpic_ack_irq,
- .end = openpic_end_irq,
- .set_affinity = openpic_set_affinity,
-};
-
-#ifdef CONFIG_SMP
-static void openpic_end_ipi(unsigned int irq_nr);
-static void openpic_ack_ipi(unsigned int irq_nr);
-static void openpic_enable_ipi(unsigned int irq_nr);
-static void openpic_disable_ipi(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic_ipi = {
- .typename = " OpenPIC ",
- .enable = openpic_enable_ipi,
- .disable = openpic_disable_ipi,
- .ack = openpic_ack_ipi,
- .end = openpic_end_ipi,
-};
-#endif /* CONFIG_SMP */
-
-/*
- * Accesses to the current processor's openpic registers
- */
-#ifdef CONFIG_SMP
-#define THIS_CPU Processor[cpu]
-#define DECL_THIS_CPU int cpu = smp_hw_index[smp_processor_id()]
-#define CHECK_THIS_CPU check_arg_cpu(cpu)
-#else
-#define THIS_CPU Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-#endif /* CONFIG_SMP */
-
-#if 1
-#define check_arg_ipi(ipi) \
- if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
- printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
- if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
- printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
- if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
- printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
- if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
- printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-#define check_arg_irq(irq) \
- if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
- || ISR[irq - open_pic_irq_offset] == 0) { \
- printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
- dump_stack(); }
-#define check_arg_cpu(cpu) \
- if (cpu < 0 || cpu >= NumProcessors){ \
- printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
- dump_stack(); }
-#else
-#define check_arg_ipi(ipi) do {} while (0)
-#define check_arg_timer(timer) do {} while (0)
-#define check_arg_vec(vec) do {} while (0)
-#define check_arg_pri(pri) do {} while (0)
-#define check_arg_irq(irq) do {} while (0)
-#define check_arg_cpu(cpu) do {} while (0)
-#endif
-
-u_int openpic_read(volatile u_int __iomem *addr)
-{
- u_int val;
-
-#ifdef OPENPIC_BIG_ENDIAN
- val = in_be32(addr);
-#else
- val = in_le32(addr);
-#endif
- return val;
-}
-
-static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
-{
-#ifdef OPENPIC_BIG_ENDIAN
- out_be32(addr, val);
-#else
- out_le32(addr, val);
-#endif
-}
-
-static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
-{
- u_int val = openpic_read(addr);
- return val & mask;
-}
-
-inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
- u_int field)
-{
- u_int val = openpic_read(addr);
- openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
-{
- openpic_writefield(addr, mask, 0);
-}
-
-static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
-{
- openpic_writefield(addr, mask, mask);
-}
-
-static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
- u_int field)
-{
- openpic_setfield(addr, OPENPIC_MASK);
- while (openpic_read(addr) & OPENPIC_ACTIVITY);
- openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-#ifdef CONFIG_SMP
-/* yes this is right ... bug, feature, you decide! -- tgall */
-u_int openpic_read_IPI(volatile u_int __iomem * addr)
-{
- u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN)
- val = in_be32(addr);
-#else
- val = in_le32(addr);
-#endif
- return val;
-}
-
-/* because of the power3 be / le above, this is needed */
-inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
-{
- u_int val = openpic_read_IPI(addr);
- openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
- openpic_writefield_IPI(addr, mask, 0);
-}
-
-static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
- openpic_writefield_IPI(addr, mask, mask);
-}
-
-static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
-{
- openpic_setfield_IPI(addr, OPENPIC_MASK);
-
- /* wait until it's not in use */
- /* BenH: Is this code really enough ? I would rather check the result
- * and eventually retry ...
- */
- while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
-
- openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-/* On platforms that may use EPIC serial mode, the default is enabled. */
-int epic_serial_mode = 1;
-
-static void __init openpic_eicr_set_clk(u_int clkval)
-{
- openpic_writefield(&OpenPIC->Global.Global_Configuration1,
- OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
-}
-
-static void __init openpic_enable_sie(void)
-{
- openpic_setfield(&OpenPIC->Global.Global_Configuration1,
- OPENPIC_EICR_SIE);
-}
-#endif
-
-#if defined(CONFIG_EPIC_SERIAL_MODE)
-static void openpic_reset(void)
-{
- openpic_setfield(&OpenPIC->Global.Global_Configuration0,
- OPENPIC_CONFIG_RESET);
- while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
- OPENPIC_CONFIG_RESET))
- mb();
-}
-#endif
-
-void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
-{
- volatile OpenPIC_Source __iomem *src = first_ISR;
- int i, last_irq;
-
- last_irq = first_irq + num_irqs;
- if (last_irq > NumSources)
- NumSources = last_irq;
- if (src == 0)
- src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
- for (i = first_irq; i < last_irq; ++i, ++src)
- ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about. In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic_init(int offset)
-{
- u_int t, i;
- u_int timerfreq;
- const char *version;
-
- if (!OpenPIC_Addr) {
- printk("No OpenPIC found !\n");
- return;
- }
- OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
- /* Have to start from ground zero.
- */
- openpic_reset();
-#endif
-
- if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
- t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
- switch (t & OPENPIC_FEATURE_VERSION_MASK) {
- case 1:
- version = "1.0";
- break;
- case 2:
- version = "1.2";
- break;
- case 3:
- version = "1.3";
- break;
- default:
- version = "?";
- break;
- }
- NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
- OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
- if (NumSources == 0)
- openpic_set_sources(0,
- ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
- OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
- NULL);
- printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
- version, NumProcessors, NumSources, OpenPIC);
- timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
- if (timerfreq)
- printk("OpenPIC timer frequency is %d.%06d MHz\n",
- timerfreq / 1000000, timerfreq % 1000000);
-
- open_pic_irq_offset = offset;
-
- /* Initialize timer interrupts */
- if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
- for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
- /* Disabled, Priority 0 */
- openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
- /* No processor */
- openpic_maptimer(i, CPU_MASK_NONE);
- }
-
-#ifdef CONFIG_SMP
- /* Initialize IPI interrupts */
- if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
- for (i = 0; i < OPENPIC_NUM_IPI; i++) {
- /* Disabled, increased priorities 10..13 */
- openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
- OPENPIC_VEC_IPI+i+offset);
- /* IPIs are per-CPU */
- irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
- irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
- }
-#endif
-
- /* Initialize external interrupts */
- if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
-
- openpic_set_priority(0xf);
-
- /* Init all external sources, including possibly the cascade. */
- for (i = 0; i < NumSources; i++) {
- int sense;
-
- if (ISR[i] == 0)
- continue;
-
- /* the bootloader may have left it enabled (bad !) */
- openpic_disable_irq(i+offset);
-
- sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
- if (sense & IRQ_SENSE_MASK)
- irq_desc[i+offset].status = IRQ_LEVEL;
-
- /* Enabled, Default priority */
- openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
- (sense & IRQ_POLARITY_MASK),
- (sense & IRQ_SENSE_MASK));
- /* Processor 0 */
- openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
- }
-
- /* Init descriptors */
- for (i = offset; i < NumSources + offset; i++)
- irq_desc[i].chip = &open_pic;
-
- /* Initialize the spurious interrupt */
- if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
- openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
- openpic_disable_8259_pass_through();
-#ifdef CONFIG_EPIC_SERIAL_MODE
- if (epic_serial_mode) {
- openpic_eicr_set_clk(7); /* Slowest value until we know better */
- openpic_enable_sie();
- }
-#endif
- openpic_set_priority(0);
-
- if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
-}
-
-#ifdef notused
-static void openpic_enable_8259_pass_through(void)
-{
- openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
- OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-static void openpic_disable_8259_pass_through(void)
-{
- openpic_setfield(&OpenPIC->Global.Global_Configuration0,
- OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- * Find out the current interrupt
- */
-u_int openpic_irq(void)
-{
- u_int vec;
- DECL_THIS_CPU;
-
- CHECK_THIS_CPU;
- vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
- OPENPIC_VECTOR_MASK);
- return vec;
-}
-
-void openpic_eoi(void)
-{
- DECL_THIS_CPU;
-
- CHECK_THIS_CPU;
- openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
- /* Handle PCI write posting */
- (void)openpic_read(&OpenPIC->THIS_CPU.EOI);
-}
-
-u_int openpic_get_priority(void)
-{
- DECL_THIS_CPU;
-
- CHECK_THIS_CPU;
- return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
- OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-
-void openpic_set_priority(u_int pri)
-{
- DECL_THIS_CPU;
-
- CHECK_THIS_CPU;
- check_arg_pri(pri);
- openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
- OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- * Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic_get_spurious(void)
-{
- return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
- OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-static void openpic_set_spurious(u_int vec)
-{
- check_arg_vec(vec);
- openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
- vec);
-}
-
-#ifdef CONFIG_SMP
-/*
- * Convert a cpu mask from logical to physical cpu numbers.
- */
-static inline cpumask_t physmask(cpumask_t cpumask)
-{
- int i;
- cpumask_t mask = CPU_MASK_NONE;
-
- cpus_and(cpumask, cpu_online_map, cpumask);
-
- for (i = 0; i < NR_CPUS; i++)
- if (cpu_isset(i, cpumask))
- cpu_set(smp_hw_index[i], mask);
-
- return mask;
-}
-#else
-#define physmask(cpumask) (cpumask)
-#endif
-
-void openpic_reset_processor_phys(u_int mask)
-{
- openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
-}
-
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
-static DEFINE_SPINLOCK(openpic_setup_lock);
-#endif
-
-#ifdef CONFIG_SMP
-/*
- * Initialize an interprocessor interrupt (and disable it)
- *
- * ipi: OpenPIC interprocessor interrupt number
- * pri: interrupt source priority
- * vec: the vector it will produce
- */
-static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
-{
- check_arg_ipi(ipi);
- check_arg_pri(pri);
- check_arg_vec(vec);
- openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
- OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
- (pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- * Send an IPI to one or more CPUs
- *
- * Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
- * and not a system-wide interrupt number
- */
-void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
-{
- DECL_THIS_CPU;
-
- CHECK_THIS_CPU;
- check_arg_ipi(ipi);
- openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
- cpus_addr(physmask(cpumask))[0]);
-}
-
-void openpic_request_IPIs(void)
-{
- int i;
-
- /*
- * Make sure this matches what is defined in smp.c for
- * smp_message_{pass|recv}() or what shows up in
- * /proc/interrupts will be wrong!!! --Troy */
-
- if (OpenPIC == NULL)
- return;
-
- /*
- * IPIs are marked IRQF_DISABLED as they must run with irqs
- * disabled
- */
- request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
- openpic_ipi_action, IRQF_DISABLED,
- "IPI0 (call function)", NULL);
- request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
- openpic_ipi_action, IRQF_DISABLED,
- "IPI1 (reschedule)", NULL);
- request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
- openpic_ipi_action, IRQF_DISABLED,
- "IPI2 (invalidate tlb)", NULL);
- request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
- openpic_ipi_action, IRQF_DISABLED,
- "IPI3 (xmon break)", NULL);
-
- for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
- openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
-}
-
-/*
- * Do per-cpu setup for SMP systems.
- *
- * Get IPI's working and start taking interrupts.
- * -- Cort
- */
-
-void __devinit do_openpic_setup_cpu(void)
-{
-#ifdef CONFIG_IRQ_ALL_CPUS
- int i;
- cpumask_t msk = CPU_MASK_NONE;
-#endif
- spin_lock(&openpic_setup_lock);
-
-#ifdef CONFIG_IRQ_ALL_CPUS
- cpu_set(smp_hw_index[smp_processor_id()], msk);
-
- /* let the openpic know we want intrs. default affinity
- * is 0xffffffff until changed via /proc
- * That's how it's done on x86. If we want it differently, then
- * we should make sure we also change the default values of
- * irq_desc[].affinity in irq.c.
- */
- for (i = 0; i < NumSources; i++)
- openpic_mapirq(i, msk, CPU_MASK_ALL);
-#endif /* CONFIG_IRQ_ALL_CPUS */
- openpic_set_priority(0);
-
- spin_unlock(&openpic_setup_lock);
-}
-#endif /* CONFIG_SMP */
-
-/*
- * Initialize a timer interrupt (and disable it)
- *
- * timer: OpenPIC timer number
- * pri: interrupt source priority
- * vec: the vector it will produce
- */
-static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
-{
- check_arg_timer(timer);
- check_arg_pri(pri);
- check_arg_vec(vec);
- openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
- OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
- (pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- * Map a timer interrupt to one or more CPUs
- */
-static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
-{
- cpumask_t phys = physmask(cpumask);
- check_arg_timer(timer);
- openpic_write(&OpenPIC->Global.Timer[timer].Destination,
- cpus_addr(phys)[0]);
-}
-
-/*
- * Change the priority of an interrupt
- */
-void __init
-openpic_set_irq_priority(u_int irq, u_int pri)
-{
- check_arg_irq(irq);
- openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
- OPENPIC_PRIORITY_MASK,
- pri << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic_init_nmi_irq(u_int irq)
-{
- check_arg_irq(irq);
- openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-/*
- * Hookup a cascade to the OpenPIC.
- */
-
-static struct irqaction openpic_cascade_irqaction = {
- .handler = no_action,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
-};
-
-void __init
-openpic_hookup_cascade(u_int irq, char *name,
- int (*cascade_fn)(void))
-{
- openpic_cascade_irq = irq;
- openpic_cascade_fn = cascade_fn;
-
- if (setup_irq(irq, &openpic_cascade_irqaction))
- printk("Unable to get OpenPIC IRQ %d for cascade\n",
- irq - open_pic_irq_offset);
-}
-
-/*
- * Enable/disable an external interrupt source
- *
- * Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic_enable_irq(u_int irq)
-{
- volatile u_int __iomem *vpp;
-
- check_arg_irq(irq);
- vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
- openpic_clearfield(vpp, OPENPIC_MASK);
- /* make sure mask gets to controller before we return to user */
- do {
- mb(); /* sync is probably useless here */
- } while (openpic_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic_disable_irq(u_int irq)
-{
- volatile u_int __iomem *vpp;
- u32 vp;
-
- check_arg_irq(irq);
- vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
- openpic_setfield(vpp, OPENPIC_MASK);
- /* make sure mask gets to controller before we return to user */
- do {
- mb(); /* sync is probably useless here */
- vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
- } while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-#ifdef CONFIG_SMP
-/*
- * Enable/disable an IPI interrupt source
- *
- * Externally called, irq is an offseted system-wide interrupt number
- */
-void openpic_enable_ipi(u_int irq)
-{
- irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
- check_arg_ipi(irq);
- openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-
-}
-
-void openpic_disable_ipi(u_int irq)
-{
- irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
- check_arg_ipi(irq);
- openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-}
-#endif
-
-/*
- * Initialize an interrupt source (and disable it!)
- *
- * irq: OpenPIC interrupt number
- * pri: interrupt source priority
- * vec: the vector it will produce
- * pol: polarity (1 for positive, 0 for negative)
- * sense: 1 for level, 0 for edge
- */
-static void __init
-openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
- openpic_safe_writefield(&ISR[irq]->Vector_Priority,
- OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
- OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
- (pri << OPENPIC_PRIORITY_SHIFT) | vec |
- (pol ? OPENPIC_POLARITY_POSITIVE :
- OPENPIC_POLARITY_NEGATIVE) |
- (sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- * Map an interrupt source to one or more CPUs
- */
-static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
-{
- if (ISR[irq] == 0)
- return;
- if (!cpus_empty(keepmask)) {
- cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
- cpus_and(irqdest, irqdest, keepmask);
- cpus_or(physmask, physmask, irqdest);
- }
- openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
-}
-
-#ifdef notused
-/*
- * Set the sense for an interrupt source (and disable it!)
- *
- * sense: 1 for level, 0 for edge
- */
-static void openpic_set_sense(u_int irq, int sense)
-{
- if (ISR[irq] != 0)
- openpic_safe_writefield(&ISR[irq]->Vector_Priority,
- OPENPIC_SENSE_LEVEL,
- (sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic_ack_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
- openpic_disable_irq(irq_nr);
- openpic_eoi();
-#else
- if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
- openpic_eoi();
-#endif
-}
-
-static void openpic_end_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
- && irq_desc[irq_nr].action)
- openpic_enable_irq(irq_nr);
-#else
- if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
- openpic_eoi();
-#endif
-}
-
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
-{
- openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
-}
-
-#ifdef CONFIG_SMP
-static void openpic_ack_ipi(unsigned int irq_nr)
-{
- openpic_eoi();
-}
-
-static void openpic_end_ipi(unsigned int irq_nr)
-{
-}
-
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id)
-{
- smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset);
- return IRQ_HANDLED;
-}
-
-#endif /* CONFIG_SMP */
-
-int
-openpic_get_irq(void)
-{
- int irq = openpic_irq();
-
- /*
- * Check for the cascade interrupt and call the cascaded
- * interrupt controller function (usually i8259_irq) if so.
- * This should move to irq.c eventually. -- paulus
- */
- if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
- int cirq = openpic_cascade_fn();
-
- /* Allow for the cascade being shared with other devices */
- if (cirq != -1) {
- irq = cirq;
- openpic_eoi();
- }
- } else if (irq == OPENPIC_VEC_SPURIOUS)
- irq = -1;
- return irq;
-}
-
-#ifdef CONFIG_SMP
-void
-smp_openpic_message_pass(int target, int msg)
-{
- cpumask_t mask = CPU_MASK_ALL;
- /* make sure we're sending something that translates to an IPI */
- if (msg > 0x3) {
- printk("SMP %d: smp_message_pass: unknown msg %d\n",
- smp_processor_id(), msg);
- return;
- }
- switch (target) {
- case MSG_ALL:
- openpic_cause_IPI(msg, mask);
- break;
- case MSG_ALL_BUT_SELF:
- cpu_clear(smp_processor_id(), mask);
- openpic_cause_IPI(msg, mask);
- break;
- default:
- openpic_cause_IPI(msg, cpumask_of_cpu(target));
- break;
- }
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic_cached_enable_irq(u_int irq)
-{
- check_arg_irq(irq);
- save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic_cached_disable_irq(u_int irq)
-{
- check_arg_irq(irq);
- save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
-{
- int i;
- unsigned long flags;
-
- spin_lock_irqsave(&openpic_setup_lock, flags);
-
- if (openpic_suspend_count++ > 0) {
- spin_unlock_irqrestore(&openpic_setup_lock, flags);
- return 0;
- }
-
- openpic_set_priority(0xf);
-
- open_pic.enable = openpic_cached_enable_irq;
- open_pic.disable = openpic_cached_disable_irq;
-
- for (i=0; i<NumProcessors; i++) {
- save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
- openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
- OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
- }
-
- for (i=0; i<OPENPIC_NUM_IPI; i++)
- save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
- for (i=0; i<NumSources; i++) {
- if (ISR[i] == 0)
- continue;
- save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
- save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
- }
-
- spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
- return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_resume(struct sys_device *sysdev)
-{
- int i;
- unsigned long flags;
- u32 vppmask = OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
- OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
- OPENPIC_MASK;
-
- spin_lock_irqsave(&openpic_setup_lock, flags);
-
- if ((--openpic_suspend_count) > 0) {
- spin_unlock_irqrestore(&openpic_setup_lock, flags);
- return 0;
- }
-
- /* OpenPIC sometimes seem to need some time to be fully back up... */
- do {
- openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
- } while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
- != OPENPIC_VEC_SPURIOUS);
-
- openpic_disable_8259_pass_through();
-
- for (i=0; i<OPENPIC_NUM_IPI; i++)
- openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
- save_ipi_vp[i]);
- for (i=0; i<NumSources; i++) {
- if (ISR[i] == 0)
- continue;
- openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
- openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
- /* make sure mask gets to controller before we return to user */
- do {
- openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
- } while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
- != (save_irq_src_vp[i] & vppmask));
- }
- for (i=0; i<NumProcessors; i++)
- openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
- save_cpu_task_pri[i]);
-
- open_pic.enable = openpic_enable_irq;
- open_pic.disable = openpic_disable_irq;
-
- openpic_set_priority(0);
-
- spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
- return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct sysdev_class openpic_sysclass = {
- .name = "openpic",
-};
-
-static struct sys_device device_openpic = {
- .id = 0,
- .cls = &openpic_sysclass,
-};
-
-static struct sysdev_driver driver_openpic = {
-#ifdef CONFIG_PM
- .suspend = &openpic_suspend,
- .resume = &openpic_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic_sysfs(void)
-{
- int rc;
-
- if (!OpenPIC_Addr)
- return -ENODEV;
- printk(KERN_DEBUG "Registering openpic with sysfs...\n");
- rc = sysdev_class_register(&openpic_sysclass);
- if (rc) {
- printk(KERN_ERR "Failed registering openpic sys class\n");
- return -ENODEV;
- }
- rc = sysdev_register(&device_openpic);
- if (rc) {
- printk(KERN_ERR "Failed registering openpic sys device\n");
- return -ENODEV;
- }
- rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
- if (rc) {
- printk(KERN_ERR "Failed registering openpic sys driver\n");
- return -ENODEV;
- }
- return 0;
-}
-
-subsys_initcall(init_openpic_sysfs);
-