diff options
Diffstat (limited to 'arch/powerpc')
27 files changed, 583 insertions, 1655 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e625e9e034ae..48fb4790bfec 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -116,7 +116,7 @@ config PPC bool default y select OF - select OF_FLATTREE + select OF_EARLY_FLATTREE select HAVE_FTRACE_MCOUNT_RECORD select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index fae8192c8fcc..96deec63bcf3 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -35,7 +35,7 @@ endif BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -DTS_FLAGS ?= -p 1024 +DTC_FLAGS ?= -p 1024 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 @@ -332,10 +332,8 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) # Rule to build device tree blobs -DTC = $(objtree)/scripts/dtc/dtc - -$(obj)/%.dtb: $(dtstree)/%.dts - $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts +$(obj)/%.dtb: $(src)/dts/%.dts + $(call cmd,dtc) # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 9bb3d72c0e5a..2a56a0dbd1f7 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -33,7 +33,7 @@ aliases { ethernet0 = &EMAC0; serial0 = &UART0; - serial1 = &UART1; + //serial1 = &UART1; --gcl missing UART1 label }; cpus { @@ -52,7 +52,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - next-level-cache = <&L2C0>; + //next-level-cache = <&L2C0>; --gcl missing L2C0 label }; }; @@ -142,7 +142,7 @@ /*RXEOB*/ 0x7 0x4 /*SERR*/ 0x3 0x4 /*TXDE*/ 0x4 0x4 - /*RXDE*/ 0x5 0x4 + /*RXDE*/ 0x5 0x4>; }; POB0: opb { @@ -182,7 +182,7 @@ reg = <0x001a0000 0x00060000>; }; }; - } + }; UART0: serial@ef600300 { device_type = "serial"; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index dd3860846f15..ad3a4f4a2b04 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -10,220 +10,74 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "schindler,cm5200"; compatible = "schindler,cm5200"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - - timer@620 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; - }; - - timer@630 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - }; - - timer@640 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; - }; - - timer@650 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; - }; - - timer@660 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; - }; - - timer@670 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; + can@900 { + status = "disabled"; }; - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; + can@980 { + status = "disabled"; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - }; - - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; - serial@2000 { // PSC1 + psc@2400 { // PSC3 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; - serial@2200 { // PSC2 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2200 0x100>; - interrupts = <2 2 0>; + psc@2600 { // PSC4 + status = "disabled"; }; - serial@2400 { // PSC3 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; + psc@2800 { // PSC5 + status = "disabled"; }; - serial@2c00 { // PSC6 + psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; + ata@3a00 { + status = "disabled"; }; - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; + i2c@3d00 { + status = "disabled"; }; + }; - localbus { - compatible = "fsl,mpc5200b-lpb","simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xfc000000 0x2000000>; + pci@f0000d00 { + status = "disabled"; + }; + localbus { // 16-bit flash device at LocalPlus Bus CS0 flash@0,0 { compatible = "cfi-flash"; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 8e9be6bfe23e..27bd267d631c 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -11,195 +11,68 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "intercontrol,digsy-mtc"; compatible = "intercontrol,digsy-mtc"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; memory { - device_type = "memory"; reg = <0x00000000 0x02000000>; // 32MB }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - - timer@620 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; - }; - - timer@630 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - }; - - timer@640 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; - }; - - timer@650 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; + rtc@800 { + status = "disabled"; }; - timer@660 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; + can@900 { + status = "disabled"; }; - timer@670 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; + can@980 { + status = "disabled"; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; + psc@2000 { // PSC1 + status = "disabled"; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; + psc@2200 { // PSC2 + status = "disabled"; }; - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; + psc@2400 { // PSC3 + status = "disabled"; }; - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; - }; - - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; - serial@2600 { // PSC4 + psc@2800 { // PSC5 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2600 0x100>; - interrupts = <2 11 0>; }; - serial@2800 { // PSC5 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2800 0x100>; - interrupts = <2 12 0>; + psc@2c00 { // PSC6 + status = "disabled"; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - rtc@50 { compatible = "at,24c08"; reg = <0x50>; @@ -211,16 +84,16 @@ }; }; - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; + i2c@3d40 { + status = "disabled"; }; }; - lpb { - compatible = "fsl,mpc5200b-lpb","simple-bus"; - #address-cells = <2>; - #size-cells = <1>; + pci@f0000d00 { + status = "disabled"; + }; + + localbus { ranges = <0 0 0xff000000 0x1000000>; // 16-bit flash device at LocalPlus Bus CS0 diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts index cad9c3840afc..71d3bb4931dc 100644 --- a/arch/powerpc/boot/dts/hotfoot.dts +++ b/arch/powerpc/boot/dts/hotfoot.dts @@ -117,6 +117,8 @@ }; IIC: i2c@ef600500 { + #address-cells = <1>; + #size-cells = <0>; compatible = "ibm,iic-405ep", "ibm,iic"; reg = <0xef600500 0x00000011>; interrupt-parent = <&UIC0>; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 59702ace900f..fb288bb882b6 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -10,256 +10,75 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "fsl,lite5200b"; compatible = "fsl,lite5200b"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; memory { - device_type = "memory"; reg = <0x00000000 0x10000000>; // 256MB }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - - timer@620 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; - }; - - timer@630 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - }; - - timer@640 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; - }; - - timer@650 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; - }; - - timer@660 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; - }; - - timer@670 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; - }; - - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@900 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 17 0>; - reg = <0x900 0x80>; - }; - - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; - }; - - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <0>; }; - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; + psc@2200 { // PSC2 + status = "disabled"; }; - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; + psc@2400 { // PSC3 + status = "disabled"; }; - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; + psc@2600 { // PSC4 + status = "disabled"; }; - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + psc@2800 { // PSC5 + status = "disabled"; }; - serial@2000 { // PSC1 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <0>; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; + psc@2c00 { // PSC6 + status = "disabled"; }; // PSC2 in ac97 mode example //ac97@2200 { // PSC2 // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; // cell-index = <1>; - // reg = <0x2200 0x100>; - // interrupts = <2 2 0>; //}; // PSC3 in CODEC mode example //i2s@2400 { // PSC3 // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible // cell-index = <2>; - // reg = <0x2400 0x100>; - // interrupts = <2 3 0>; - //}; - - // PSC4 in uart mode example - //serial@2600 { // PSC4 - // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <3>; - // reg = <0x2600 0x100>; - // interrupts = <2 11 0>; - //}; - - // PSC5 in uart mode example - //serial@2800 { // PSC5 - // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <4>; - // reg = <0x2800 0x100>; - // interrupts = <2 12 0>; //}; // PSC6 in spi mode example //spi@2c00 { // PSC6 // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; // cell-index = <5>; - // reg = <0x2c00 0x100>; - // interrupts = <2 4 0>; //}; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - }; - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; - eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -273,12 +92,6 @@ }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 0xc000 0 0 2 &mpc5200_pic 1 1 3 @@ -298,11 +111,6 @@ }; localbus { - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xfe000000 0x02000000>; flash@0,0 { diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index 0c3902bc5b6a..48d72f38e5ed 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -11,14 +11,11 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "fsl,media5200"; compatible = "fsl,media5200"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; aliases { console = &console; @@ -30,16 +27,7 @@ }; cpus { - #address-cells = <1>; - #size-cells = <0>; - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot bus-frequency = <132000000>; // 132 MHz clock-frequency = <396000000>; // 396 MHz @@ -47,205 +35,57 @@ }; memory { - device_type = "memory"; reg = <0x00000000 0x08000000>; // 128MB RAM }; - soc@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; + soc5200@f0000000 { bus-frequency = <132000000>;// 132 MHz - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - - timer@620 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; - }; - - timer@630 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - }; - - timer@640 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; - }; - - timer@650 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; - }; - - timer@660 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; - }; - - timer@670 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; - }; - - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@900 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 17 0>; - reg = <0x900 0x80>; + psc@2000 { // PSC1 + status = "disabled"; }; - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; + psc@2200 { // PSC2 + status = "disabled"; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; + psc@2400 { // PSC3 + status = "disabled"; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; + psc@2600 { // PSC4 + status = "disabled"; }; - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - }; - - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0x100>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; - }; - - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + psc@2800 { // PSC5 + status = "disabled"; }; // PSC6 in uart mode - console: serial@2c00 { // PSC6 + console: psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - port-number = <0>; // Logical port assignment - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; - eth0: ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; + ethernet@3000 { phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - }; - - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; - }; - - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; + usb@1000 { + reg = <0x1000 0x100>; }; }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot 0xc000 0 0 2 &media5200_fpga 0 3 @@ -262,37 +102,29 @@ 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP >; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; - bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + interrupt-parent = <&mpc5200_pic>; }; localbus { - compatible = "fsl,mpc5200b-lpb","simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = < 0 0 0xfc000000 0x02000000 1 0 0xfe000000 0x02000000 2 0 0xf0010000 0x00010000 3 0 0xf0020000 0x00010000 >; - flash@0,0 { compatible = "amd,am29lv28ml", "cfi-flash"; - reg = <0 0x0 0x2000000>; // 32 MB - bank-width = <4>; // Width in bytes of the flash bank - device-width = <2>; // Two devices on each bank + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank }; flash@1,0 { compatible = "amd,am29lv28ml", "cfi-flash"; - reg = <1 0 0x2000000>; // 32 MB - bank-width = <4>; // Width in bytes of the flash bank - device-width = <2>; // Two devices on each bank + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank }; media5200_fpga: fpga@2,0 { diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 6ca4fc144a33..0b78e89ac69b 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -10,219 +10,73 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "promess,motionpro"; compatible = "promess,motionpro"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - - timer@620 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; - }; - - timer@630 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; - }; - - timer@640 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; - }; - - timer@650 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; - }; - - motionpro-led@660 { // Motion-PRO status LED + timer@660 { // Motion-PRO status LED compatible = "promess,motionpro-led"; label = "motionpro-statusled"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; blink-delay = <100>; // 100 msec }; - motionpro-led@670 { // Motion-PRO ready LED + timer@670 { // Motion-PRO ready LED compatible = "promess,motionpro-led"; label = "motionpro-readyled"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; - }; - - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; + can@900 { + status = "disabled"; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; }; - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; + // PSC2 in spi master mode + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + cell-index = <1>; }; - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; + psc@2400 { // PSC3 + status = "disabled"; }; - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + psc@2600 { // PSC4 + status = "disabled"; }; - serial@2000 { // PSC1 + psc@2800 { // PSC5 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; - }; - - // PSC2 in spi master mode - spi@2200 { // PSC2 - compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; - cell-index = <1>; - reg = <0x2200 0x100>; - interrupts = <2 2 0>; }; - // PSC5 in uart mode - serial@2800 { // PSC5 - compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2800 0x100>; - interrupts = <2 12 0>; + psc@2c00 { // PSC6 + status = "disabled"; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@2 { reg = <2>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; + i2c@3d00 { + status = "disabled"; }; i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; - rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -235,10 +89,11 @@ }; }; + pci@f0000d00 { + status = "disabled"; + }; + localbus { - compatible = "fsl,mpc5200b-lpb","simple-bus"; - #address-cells = <2>; - #size-cells = <1>; ranges = <0 0 0xff000000 0x01000000 1 0 0x50000000 0x00010000 2 0 0x50010000 0x00010000 @@ -280,5 +135,6 @@ #size-cells = <1>; #address-cells = <1>; }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi new file mode 100644 index 000000000000..bc27548e895d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -0,0 +1,275 @@ +/* + * base MPC5200b Device Tree Source + * + * Copyright (C) 2010 SecretLab + * Grant Likely <grant@secretlab.ca> + * John Bonesio <bones@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc5200b"; + compatible = "fsl,mpc5200b"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + powerpc: PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory: memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc: soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb: usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + psc1: psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc2: psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc3: psc@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc4: psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; + }; + + psc5: psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + + psc6: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + eth0: ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci: pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + // interrupt-map-mask = need to add + // interrupt-map = need to add + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + // ranges = need to add + }; + + localbus: localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x2000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts index b72a7581d798..21d34720fcc9 100644 --- a/arch/powerpc/boot/dts/mucmc52.dts +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -11,172 +11,109 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "manroland,mucmc52"; compatible = "manroland,mucmc52"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - gpt0: timer@600 { // GPT 0 in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; gpio-controller; #gpio-cells = <2>; }; gpt1: timer@610 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; gpio-controller; #gpio-cells = <2>; }; gpt2: timer@620 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; gpt3: timer@630 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; + timer@640 { + status = "disabled"; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; + timer@650 { + status = "disabled"; + }; + + timer@660 { + status = "disabled"; + }; + + timer@670 { + status = "disabled"; }; - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; + rtc@800 { + status = "disabled"; }; - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + can@900 { + status = "disabled"; }; - serial@2000 { /* PSC1 in UART mode */ + can@980 { + status = "disabled"; + }; + + spi@f00 { + status = "disabled"; + }; + + usb@1000 { + status = "disabled"; + }; + + psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; - serial@2200 { /* PSC2 in UART mode */ + psc@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2200 0x100>; - interrupts = <2 2 0>; }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { compatible = "intel,lxt971"; reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; + i2c@3d00 { + status = "disabled"; }; i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; hwmon@2c { compatible = "ad,adm9240"; reg = <0x2c>; @@ -186,20 +123,9 @@ reg = <0x51>; }; }; - - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; - }; }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = < /* IDSEL 0x10 */ @@ -208,20 +134,12 @@ 0x8000 0 0 3 &mpc5200_pic 0 2 3 0x8000 0 0 4 &mpc5200_pic 0 1 3 >; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 10 0>; - bus-range = <0 0>; ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 0x02000000 0 0x90000000 0x90000000 0 0x10000000 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; }; localbus { - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xff800000 0x00800000 1 0 0x80000000 0x00800000 3 0 0x80000000 0x00800000>; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 8a4ec30b21ae..9e354997eb7e 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -12,246 +12,92 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "phytec,pcm030"; compatible = "phytec,pcm030"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; + timer@600 { // General Purpose Timer fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@900 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 17 0>; - reg = <0x900 0x80>; - }; - - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; - }; - - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - }; - - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; - }; - - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; - }; - - ac97@2000 { /* PSC1 in ac97 mode */ + psc@2000 { /* PSC1 in ac97 mode */ compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; - serial@2400 { /* PSC3 in UART mode */ + psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; }; /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - }; - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -259,6 +105,7 @@ eeprom@52 { compatible = "catalyst,24c32"; reg = <0x52>; + pagesize = <32>; }; }; @@ -269,12 +116,6 @@ }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 0xc000 0 0 2 &mpc5200_pic 1 1 3 @@ -285,11 +126,12 @@ 0xc800 0 0 2 &mpc5200_pic 1 2 3 0xc800 0 0 3 &mpc5200_pic 1 3 3 0xc800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 10 0>; - bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; + + localbus { + status = "disabled"; + }; }; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 85d857a5d46e..1dd478bfff96 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -12,99 +12,37 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "phytec,pcm032"; compatible = "phytec,pcm032"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; memory { - device_type = "memory"; reg = <0x00000000 0x08000000>; // 128MB }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - - timer@600 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; + timer@600 { // General Purpose Timer fsl,has-wdt; }; - timer@610 { // General Purpose Timer - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; - }; - gpt2: timer@620 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; gpt3: timer@630 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x630 0x10>; - interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; gpt4: timer@640 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; gpt5: timer@650 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; @@ -118,163 +56,62 @@ }; gpt7: timer@670 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; - rtc@800 { // Real time clock - compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; - reg = <0x800 0x100>; - interrupts = <1 5 0 1 6 0>; - }; - - can@900 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 17 0>; - reg = <0x900 0x80>; - }; - - can@980 { - compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - interrupts = <2 18 0>; - reg = <0x980 0x80>; - }; - - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; - }; - - spi@f00 { - compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; - reg = <0xf00 0x20>; - interrupts = <2 13 0 2 14 0>; - }; - - usb@1000 { - compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; - reg = <0x1000 0xff>; - interrupts = <2 6 0>; - }; - - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; - }; - - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; - }; - - ac97@2000 { /* PSC1 is ac97 */ + psc@2000 { /* PSC1 is ac97 */ compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; cell-index = <0>; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; - serial@2400 { /* PSC3 in UART mode */ + psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; - reg = <0x2400 0x100>; - interrupts = <2 3 0>; }; /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; - }; - - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - }; - i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; }; eeprom@52 { - compatible = "at24,24c32"; + compatible = "catalyst,24c32"; reg = <0x52>; + pagesize = <32>; }; }; - - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; - }; }; pci@f0000d00 { - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; - reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0 0 7>; interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot 0xc000 0 0 2 &mpc5200_pic 1 1 3 @@ -285,20 +122,12 @@ 0xc800 0 0 2 &mpc5200_pic 1 2 3 0xc800 0 0 3 &mpc5200_pic 1 3 3 0xc800 0 0 4 &mpc5200_pic 0 0 3>; - clock-frequency = <0>; // From boot loader - interrupts = <2 8 0 2 9 0 2 10 0>; - bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; localbus { - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xfe000000 0x02000000 1 0 0xfc000000 0x02000000 2 0 0xfbe00000 0x00200000 @@ -351,40 +180,39 @@ bank-width = <2>; }; - /* + /* * example snippets for FPGA * * fpga@3,0 { - * compatible = "fpga_driver"; - * reg = <3 0 0x02000000>; - * bank-width = <4>; + * compatible = "fpga_driver"; + * reg = <3 0 0x02000000>; + * bank-width = <4>; * }; * * fpga@4,0 { - * compatible = "fpga_driver"; - * reg = <4 0 0x02000000>; - * bank-width = <4>; + * compatible = "fpga_driver"; + * reg = <4 0 0x02000000>; + * bank-width = <4>; * }; - */ + */ - /* + /* * example snippets for free chipselects - * + * * device@5,0 { - * compatible = "custom_driver"; - * reg = <5 0 0x02000000>; + * compatible = "custom_driver"; + * reg = <5 0 0x02000000>; * }; - * + * * device@6,0 { - * compatible = "custom_driver"; - * reg = <6 0 0x02000000>; + * compatible = "custom_driver"; + * reg = <6 0 0x02000000>; * }; - * + * * device@7,0 { - * compatible = "custom_driver"; - * reg = <7 0 0x02000000>; + * compatible = "custom_driver"; + * reg = <7 0 0x02000000>; * }; - */ + */ }; }; - diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts index 019264c62904..ba83d5488ec6 100644 --- a/arch/powerpc/boot/dts/uc101.dts +++ b/arch/powerpc/boot/dts/uc101.dts @@ -11,79 +11,24 @@ * option) any later version. */ -/dts-v1/; +/include/ "mpc5200b.dtsi" / { model = "manroland,uc101"; compatible = "manroland,uc101"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&mpc5200_pic>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,5200@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <0x4000>; // L1, 16K - i-cache-size = <0x4000>; // L1, 16K - timebase-frequency = <0>; // from bootloader - bus-frequency = <0>; // from bootloader - clock-frequency = <0>; // from bootloader - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x04000000>; // 64MB - }; soc5200@f0000000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc5200b-immr"; - ranges = <0 0xf0000000 0x0000c000>; - reg = <0xf0000000 0x00000100>; - bus-frequency = <0>; // from bootloader - system-frequency = <0>; // from bootloader - - cdm@200 { - compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; - reg = <0x200 0x38>; - }; - - mpc5200_pic: interrupt-controller@500 { - // 5200 interrupts are encoded into two levels; - interrupt-controller; - #interrupt-cells = <3>; - compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; - reg = <0x500 0x80>; - }; - gpt0: timer@600 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x600 0x10>; - interrupts = <1 9 0>; gpio-controller; #gpio-cells = <2>; }; gpt1: timer@610 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x610 0x10>; - interrupts = <1 10 0>; gpio-controller; #gpio-cells = <2>; }; gpt2: timer@620 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x620 0x10>; - interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; @@ -97,118 +42,85 @@ }; gpt4: timer@640 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x640 0x10>; - interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; gpt5: timer@650 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x650 0x10>; - interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; gpt6: timer@660 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x660 0x10>; - interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; gpt7: timer@670 { // General Purpose Timer in GPIO mode - compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - reg = <0x670 0x10>; - interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_simple: gpio@b00 { - compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; - reg = <0xb00 0x40>; - interrupts = <1 7 0>; - gpio-controller; - #gpio-cells = <2>; + rtc@800 { + status = "disabled"; }; - gpio_wkup: gpio@c00 { - compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; - reg = <0xc00 0x40>; - interrupts = <1 8 0 0 3 0>; - gpio-controller; - #gpio-cells = <2>; + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; }; - dma-controller@1200 { - compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; - reg = <0x1200 0x80>; - interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 - 3 4 0 3 5 0 3 6 0 3 7 0 - 3 8 0 3 9 0 3 10 0 3 11 0 - 3 12 0 3 13 0 3 14 0 3 15 0>; + spi@f00 { + status = "disabled"; }; - xlb@1f00 { - compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; - reg = <0x1f00 0x100>; + usb@1000 { + status = "disabled"; }; - serial@2000 { /* PSC1 in UART mode */ + psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2000 0x100>; - interrupts = <2 1 0>; }; - serial@2200 { /* PSC2 in UART mode */ + psc@2200 { // PSC2 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2200 0x100>; - interrupts = <2 2 0>; }; - serial@2c00 { /* PSC6 in UART mode */ + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - reg = <0x2c00 0x100>; - interrupts = <2 4 0>; }; ethernet@3000 { - compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; - reg = <0x3000 0x400>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts - interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - phy0: ethernet-phy@0 { compatible = "intel,lxt971"; reg = <0>; }; }; - ata@3a00 { - compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; - reg = <0x3a00 0x100>; - interrupts = <2 7 0>; + i2c@3d00 { + status = "disabled"; }; i2c@3d40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d40 0x40>; - interrupts = <2 16 0>; fsl,preserve-clocking; clock-frequency = <400000>; @@ -221,19 +133,13 @@ reg = <0x51>; }; }; + }; - sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; - reg = <0x8000 0x4000>; - }; + pci@f0000d00 { + status = "disabled"; }; localbus { - compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; - - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xff800000 0x00800000 1 0 0x80000000 0x00800000 3 0 0x80000000 0x00800000>; diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index ae26f2efd089..d72757585595 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -42,7 +42,7 @@ extern void pci_create_OF_bus_map(void); /* Translate a DMA address from device space to CPU space */ extern u64 of_translate_dma_address(struct device_node *dev, - const u32 *in_addr); + const __be32 *in_addr); #ifdef CONFIG_PCI extern unsigned long pci_address_to_pio(phys_addr_t address); @@ -63,9 +63,6 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); /* cache lookup */ struct device_node *of_find_next_cache_node(struct device_node *np); -/* Get the MAC address */ -extern const void *of_get_mac_address(struct device_node *np); - #ifdef CONFIG_NUMA extern int of_node_to_nid(struct device_node *device); #else diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 88334af038e5..c2b7a07cc3d3 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -117,41 +117,3 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, cells = prop ? *(u32 *)prop : of_n_size_cells(dn); *size = of_read_number(dma_window, cells); } - -/** - * Search the device tree for the best MAC address to use. 'mac-address' is - * checked first, because that is supposed to contain to "most recent" MAC - * address. If that isn't set, then 'local-mac-address' is checked next, - * because that is the default address. If that isn't set, then the obsolete - * 'address' is checked, just in case we're using an old device tree. - * - * Note that the 'address' property is supposed to contain a virtual address of - * the register set, but some DTS files have redefined that property to be the - * MAC address. - * - * All-zero MAC addresses are rejected, because those could be properties that - * exist in the device tree, but were not set by U-Boot. For example, the - * DTS could define 'mac-address' and 'local-mac-address', with zero MAC - * addresses. Some older U-Boots only initialized 'local-mac-address'. In - * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists - * but is all zeros. -*/ -const void *of_get_mac_address(struct device_node *np) -{ - struct property *pp; - - pp = of_find_property(np, "mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "local-mac-address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - pp = of_find_property(np, "address", NULL); - if (pp && (pp->length == 6) && is_valid_ether_addr(pp->value)) - return pp->value; - - return NULL; -} -EXPORT_SYMBOL(of_get_mac_address); diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c index 546bbc229d19..2521d93ef136 100644 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -50,7 +50,7 @@ machine_device_initcall(ppc40x_simple, ppc40x_device_probe); * Again, if your board needs to do things differently then create a * board.c file for it rather than adding it to this list. */ -static char *board[] __initdata = { +static const char *board[] __initdata = { "amcc,acadia", "amcc,haleakala", "amcc,kilauea", @@ -60,14 +60,9 @@ static char *board[] __initdata = { static int __init ppc40x_probe(void) { - unsigned long root = of_get_flat_dt_root(); - int i = 0; - - for (i = 0; i < ARRAY_SIZE(board); i++) { - if (of_flat_dt_is_compatible(root, board[i])) { - ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); - return 1; - } + if (of_flat_dt_match(of_get_flat_dt_root(), board)) { + ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC); + return 1; } return 0; diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c index e487eb06ec6b..926731f1ff01 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -26,7 +26,7 @@ /* * list of supported boards */ -static char *board[] __initdata = { +static const char *board[] __initdata = { "prt,prtlvt", NULL }; @@ -36,16 +36,7 @@ static char *board[] __initdata = { */ static int __init mpc5121_generic_probe(void) { - unsigned long node = of_get_flat_dt_root(); - int i = 0; - - while (board[i]) { - if (of_flat_dt_is_compatible(node, board[i])) - break; - i++; - } - - return board[i] != NULL; + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(mpc5121_generic) { diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index de55bc0584b5..01ffa64d2aa7 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -172,20 +172,18 @@ static void __init lite5200_setup_arch(void) mpc52xx_setup_pci(); } +static const char *board[] __initdata = { + "fsl,lite5200", + "fsl,lite5200b", + NULL, +}; + /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init lite5200_probe(void) { - unsigned long node = of_get_flat_dt_root(); - const char *model = of_get_flat_dt_prop(node, "model", NULL); - - if (!of_flat_dt_is_compatible(node, "fsl,lite5200") && - !of_flat_dt_is_compatible(node, "fsl,lite5200b")) - return 0; - pr_debug("%s board found\n", model ? model : "unknown"); - - return 1; + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(lite5200) { diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c index 0bac3a3dbecf..2c7780cb68e5 100644 --- a/arch/powerpc/platforms/52xx/media5200.c +++ b/arch/powerpc/platforms/52xx/media5200.c @@ -239,7 +239,7 @@ static void __init media5200_setup_arch(void) } /* list of the supported boards */ -static char *board[] __initdata = { +static const char *board[] __initdata = { "fsl,media5200", NULL }; @@ -249,16 +249,7 @@ static char *board[] __initdata = { */ static int __init media5200_probe(void) { - unsigned long node = of_get_flat_dt_root(); - int i = 0; - - while (board[i]) { - if (of_flat_dt_is_compatible(node, board[i])) - break; - i++; - } - - return (board[i] != NULL); + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(media5200_platform) { diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index d45be5b5ad49..e36d6e232ae6 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -49,7 +49,7 @@ static void __init mpc5200_simple_setup_arch(void) } /* list of the supported boards */ -static char *board[] __initdata = { +static const char *board[] __initdata = { "intercontrol,digsy-mtc", "manroland,mucmc52", "manroland,uc101", @@ -66,16 +66,7 @@ static char *board[] __initdata = { */ static int __init mpc5200_simple_probe(void) { - unsigned long node = of_get_flat_dt_root(); - int i = 0; - - while (board[i]) { - if (of_flat_dt_is_compatible(node, board[i])) - break; - i++; - } - - return (board[i] != NULL); + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(mpc5200_simple_platform) { diff --git a/arch/powerpc/platforms/83xx/mpc830x_rdb.c b/arch/powerpc/platforms/83xx/mpc830x_rdb.c index 846831d495b5..661d354e4ff2 100644 --- a/arch/powerpc/platforms/83xx/mpc830x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc830x_rdb.c @@ -57,16 +57,19 @@ static void __init mpc830x_rdb_init_IRQ(void) ipic_set_default_priority(); } +struct const char *board[] __initdata = { + "MPC8308RDB", + "fsl,mpc8308rdb", + "denx,mpc8308_p1m", + NULL +} + /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init mpc830x_rdb_probe(void) { - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "MPC8308RDB") || - of_flat_dt_is_compatible(root, "fsl,mpc8308rdb") || - of_flat_dt_is_compatible(root, "denx,mpc8308_p1m"); + return of_flat_dt_match(of_get_flat_dt_root(), board); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index ae525e4745d2..b54cd736a895 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -60,15 +60,18 @@ static void __init mpc831x_rdb_init_IRQ(void) ipic_set_default_priority(); } +struct const char *board[] __initdata = { + "MPC8313ERDB", + "fsl,mpc8315erdb", + NULL +} + /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init mpc831x_rdb_probe(void) { - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "MPC8313ERDB") || - of_flat_dt_is_compatible(root, "fsl,mpc8315erdb"); + return of_flat_dt_match(of_get_flat_dt_root(), board); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 910caa6b5810..7bafbf2ec0f9 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -101,17 +101,20 @@ static void __init mpc837x_rdb_init_IRQ(void) ipic_set_default_priority(); } +static const char *board[] __initdata = { + "fsl,mpc8377rdb", + "fsl,mpc8378rdb", + "fsl,mpc8379rdb", + "fsl,mpc8377wlan", + NULL +}; + /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init mpc837x_rdb_probe(void) { - unsigned long root = of_get_flat_dt_root(); - - return of_flat_dt_is_compatible(root, "fsl,mpc8377rdb") || - of_flat_dt_is_compatible(root, "fsl,mpc8378rdb") || - of_flat_dt_is_compatible(root, "fsl,mpc8379rdb") || - of_flat_dt_is_compatible(root, "fsl,mpc8377wlan"); + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(mpc837x_rdb) { diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index 8f29bbce5360..5e847d0b47c8 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -186,21 +186,21 @@ static int __init declare_of_platform_devices(void) } machine_device_initcall(tqm85xx, declare_of_platform_devices); +static const char *board[] __initdata = { + "tqc,tqm8540", + "tqc,tqm8541", + "tqc,tqm8548", + "tqc,tqm8555", + "tqc,tqm8560", + NULL +}; + /* * Called very early, device-tree isn't unflattened */ static int __init tqm85xx_probe(void) { - unsigned long root = of_get_flat_dt_root(); - - if ((of_flat_dt_is_compatible(root, "tqc,tqm8540")) || - (of_flat_dt_is_compatible(root, "tqc,tqm8541")) || - (of_flat_dt_is_compatible(root, "tqc,tqm8548")) || - (of_flat_dt_is_compatible(root, "tqc,tqm8555")) || - (of_flat_dt_is_compatible(root, "tqc,tqm8560"))) - return 1; - - return 0; + return of_flat_dt_match(of_get_flat_dt_root(), board); } define_machine(tqm85xx) { diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index 1398bc454999..feaee402e2d6 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -16,6 +16,7 @@ #include <linux/mv643xx.h> #include <linux/platform_device.h> #include <linux/of_platform.h> +#include <linux/of_net.h> #include <linux/dma-mapping.h> #include <asm/prom.h> diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index d4d15aaf18fa..c2d675b6392c 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -19,6 +19,7 @@ #include <linux/module.h> #include <linux/device.h> #include <linux/platform_device.h> +#include <linux/of_net.h> #include <asm/tsi108.h> #include <asm/system.h> |