summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/Kconfig21
-rw-r--r--arch/powerpc/boot/Makefile29
-rw-r--r--arch/powerpc/boot/dummy.c4
-rw-r--r--arch/powerpc/configs/pmac32_defconfig105
-rw-r--r--arch/powerpc/kernel/Makefile3
-rw-r--r--arch/powerpc/kernel/crash.c77
-rw-r--r--arch/powerpc/kernel/pci_32.c1897
-rw-r--r--arch/powerpc/kernel/prom_init.c3
-rw-r--r--arch/powerpc/platforms/maple/pci.c1
-rw-r--r--arch/powerpc/platforms/maple/setup.c85
-rw-r--r--arch/powerpc/platforms/maple/time.c23
11 files changed, 2071 insertions, 177 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 01feed0e2a15..df338c5cc910 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -78,17 +78,6 @@ config PPC_UDBG_16550
bool
default n
-config CRASH_DUMP
- bool "kernel crash dumps (EXPERIMENTAL)"
- depends on PPC_MULTIPLATFORM
- depends on EXPERIMENTAL
- help
- Build a kernel suitable for use as a kdump capture kernel.
- The kernel will be linked at a different address than normal, and
- so can only be used for Kdump.
-
- Don't change this unless you know what you are doing.
-
config GENERIC_TBSYNC
bool
default y if PPC32 && SMP
@@ -584,6 +573,16 @@ config KEXEC
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
+ help
+ Build a kernel suitable for use as a kdump capture kernel.
+ The kernel will be linked at a different address than normal, and
+ so can only be used for Kdump.
+
+ Don't change this unless you know what you are doing.
+
config EMBEDDEDBOOT
bool
depends on 8xx || 8260
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 788dec4c7ef3..840ae595a617 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -27,6 +27,7 @@ BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem \
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
OBJCOPYFLAGS := contents,alloc,load,readonly,data
OBJCOPY_COFF_ARGS := -O aixcoff-rs6000 --set-start 0x500000
+OBJCOPY_MIB_ARGS := -O aixcoff-rs6000 -R .stab -R .stabstr -R .comment
zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c
zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h
@@ -90,11 +91,11 @@ gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section)))
hostprogs-y := addnote addRamDisk hack-coff
targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \
- zImage.coff zImage.initrd.coff \
+ zImage.coff zImage.initrd.coff miboot.image miboot.initrd.image \
$(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \
$(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \
$(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \
- vmlinux.initrd
+ vmlinux.initrd dummy.o
extra-y := initrd.o
quiet_cmd_ramdisk = RAMDISK $@
@@ -116,6 +117,10 @@ quiet_cmd_addsection = ADDSEC $@
quiet_cmd_addnote = ADDNOTE $@
cmd_addnote = $(obj)/addnote $@
+quiet_cmd_gen-miboot = GEN $@
+ cmd_gen-miboot = $(OBJCOPY) $(OBJCOPY_MIB_ARGS) \
+ --add-section=$1=$(word 2, $^) $< $@
+
quiet_cmd_gencoff = COFF $@
cmd_gencoff = $(OBJCOPY) $(OBJCOPY_COFF_ARGS) $@ && \
$(obj)/hack-coff $@
@@ -141,19 +146,25 @@ $(obj)/zImage.initrd.vmode $(obj)/zImage.initrd.coff: obj-boot += $(call obj-sec
$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds
$(call cmd,bootld,$(obj-boot),zImage.lds)
-# For 32-bit powermacs, build the COFF images as well as the ELF images.
+# For 32-bit powermacs, build the COFF and miboot images
+# as well as the ELF images.
coffimage-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.coff
coffrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/zImage.initrd.coff
+mibootimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.image
+mibrdimg-$(CONFIG_PPC_PMAC)-$(CONFIG_PPC32) := $(obj)/miboot.initrd.image
-$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y)
+$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote $(coffimage-y-y) \
+ $(mibootimg-y-y)
@cp -f $< $@
$(call if_changed,addnote)
-$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote $(coffrdimg-y-y)
+$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote \
+ $(coffrdimg-y-y) $(mibrdimg-y-y)
@cp -f $< $@
$(call if_changed,addnote)
-$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
+$(obj)/zImage.coff: $(call obj-sec, $(required)) $(obj-boot) \
+ $(srctree)/$(src)/zImage.coff.lds $(obj)/hack-coff
$(call cmd,bootld,$(obj-boot),zImage.coff.lds)
$(call cmd,gencoff)
@@ -162,6 +173,12 @@ $(obj)/zImage.initrd.coff: $(call obj-sec, $(required) $(initrd)) $(obj-boot) \
$(call cmd,bootld,$(obj-boot),zImage.coff.lds)
$(call cmd,gencoff)
+$(obj)/miboot.image: $(obj)/dummy.o $(obj)/vmlinux.gz
+ $(call cmd,gen-miboot,image)
+
+$(obj)/miboot.initrd.image: $(obj)/miboot.image $(images)/ramdisk.image.gz
+ $(call cmd,gen-miboot,initrd)
+
#-----------------------------------------------------------
# build u-boot images
#-----------------------------------------------------------
diff --git a/arch/powerpc/boot/dummy.c b/arch/powerpc/boot/dummy.c
new file mode 100644
index 000000000000..31dbf45bf99c
--- /dev/null
+++ b/arch/powerpc/boot/dummy.c
@@ -0,0 +1,4 @@
+int main(void)
+{
+ return 0;
+}
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 398203bd98eb..2ace57d1e333 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-rc5
-# Tue Dec 13 17:24:05 2005
+# Linux kernel version: 2.6.15
+# Sat Jan 14 16:26:08 2006
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
@@ -15,11 +15,15 @@ CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_GENERIC_TBSYNC is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_CLASSIC32=y
# CONFIG_PPC_52xx is not set
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
@@ -28,6 +32,7 @@ CONFIG_6xx=y
# CONFIG_8xx is not set
# CONFIG_E200 is not set
# CONFIG_E500 is not set
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@@ -53,17 +58,18 @@ CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
+CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -72,8 +78,10 @@ CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
#
# Loadable module support
@@ -113,13 +121,10 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_APUS is not set
# CONFIG_PPC_CHRP is not set
CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF=y
CONFIG_MPIC=y
# CONFIG_PPC_RTAS is not set
# CONFIG_MMIO_NVRAM is not set
-# CONFIG_CRASH_DUMP is not set
CONFIG_PPC_MPC106=y
-# CONFIG_GENERIC_TBSYNC is not set
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
@@ -195,6 +200,11 @@ CONFIG_CARDBUS=y
# PC-card bridges
#
CONFIG_YENTA=m
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
@@ -464,7 +474,7 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
#
@@ -491,7 +501,7 @@ CONFIG_PROC_EVENTS=y
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
-CONFIG_MAC_FLOPPY=y
+CONFIG_MAC_FLOPPY=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
@@ -603,7 +613,7 @@ CONFIG_SCSI_CONSTANTS=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
@@ -645,12 +655,7 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -658,7 +663,7 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_MESH=y
CONFIG_SCSI_MESH_SYNC_RATE=5
-CONFIG_SCSI_MESH_RESET_DELAY_MS=1000
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
CONFIG_SCSI_MAC53C94=y
#
@@ -727,7 +732,6 @@ CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
-# CONFIG_IEEE1394_CMP is not set
#
# I2O device support
@@ -740,7 +744,7 @@ CONFIG_IEEE1394_RAWIO=m
CONFIG_ADB=y
CONFIG_ADB_CUDA=y
CONFIG_ADB_PMU=y
-CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
CONFIG_PMAC_BACKLIGHT=y
CONFIG_INPUT_ADBHID=y
@@ -819,6 +823,7 @@ CONFIG_PCNET32=y
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
@@ -978,14 +983,14 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
-# CONFIG_SERIAL_PMACZILOG is not set
-# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_PMACZILOG=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -1058,7 +1063,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_KEYWEST=m
+CONFIG_I2C_POWERMAC=y
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -1160,7 +1165,6 @@ CONFIG_FB_ATY128=y
CONFIG_FB_ATY=y
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
-# CONFIG_FB_ATY_XL_INIT is not set
CONFIG_FB_ATY_GX=y
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
@@ -1169,7 +1173,6 @@ CONFIG_FB_ATY_GX=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
@@ -1214,9 +1217,10 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
-CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -1230,6 +1234,8 @@ CONFIG_SND_DUMMY=m
#
# PCI devices
#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
@@ -1238,45 +1244,44 @@ CONFIG_SND_DUMMY=m
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
-# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_YMFPCI is not set
#
# ALSA PowerMac devices
#
CONFIG_SND_POWERMAC=m
-# CONFIG_SND_POWERMAC_AUTO_DRC is not set
+CONFIG_SND_POWERMAC_AUTO_DRC=y
#
# USB devices
@@ -1336,6 +1341,7 @@ CONFIG_USB_PRINTER=m
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
@@ -1355,6 +1361,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=y
@@ -1501,6 +1508,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
@@ -1540,6 +1548,7 @@ CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=m
+# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
@@ -1670,12 +1679,13 @@ CONFIG_OPROFILE=y
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
@@ -1688,6 +1698,11 @@ CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
#
# Security options
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index a94699d8dc52..c287980b7e65 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -60,7 +60,8 @@ obj-$(CONFIG_MODULES) += $(module-y)
pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \
pci_direct_iommu.o iomap.o
-obj-$(CONFIG_PCI) += $(pci64-y)
+pci32-$(CONFIG_PPC32) := pci_32.o
+obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y)
kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o
kexec-$(CONFIG_PPC32) := machine_kexec_32.o
obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y)
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 5f248e3fdf82..8c21d378f5d2 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -84,7 +84,10 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
* squirrelled away. ELF notes happen to provide
* all of that that no need to invent something new.
*/
- buf = &crash_notes[cpu][0];
+ buf = (u32*)per_cpu_ptr(crash_notes, cpu);
+ if (!buf)
+ return;
+
memset(&prstatus, 0, sizeof(prstatus));
prstatus.pr_pid = current->pid;
elf_core_copy_regs(&prstatus.pr_reg, regs);
@@ -93,76 +96,6 @@ static void crash_save_this_cpu(struct pt_regs *regs, int cpu)
final_note(buf);
}
-/* FIXME Merge this with xmon_save_regs ?? */
-static inline void crash_get_current_regs(struct pt_regs *regs)
-{
- unsigned long tmp1, tmp2;
-
- __asm__ __volatile__ (
- "std 0,0(%2)\n"
- "std 1,8(%2)\n"
- "std 2,16(%2)\n"
- "std 3,24(%2)\n"
- "std 4,32(%2)\n"
- "std 5,40(%2)\n"
- "std 6,48(%2)\n"
- "std 7,56(%2)\n"
- "std 8,64(%2)\n"
- "std 9,72(%2)\n"
- "std 10,80(%2)\n"
- "std 11,88(%2)\n"
- "std 12,96(%2)\n"
- "std 13,104(%2)\n"
- "std 14,112(%2)\n"
- "std 15,120(%2)\n"
- "std 16,128(%2)\n"
- "std 17,136(%2)\n"
- "std 18,144(%2)\n"
- "std 19,152(%2)\n"
- "std 20,160(%2)\n"
- "std 21,168(%2)\n"
- "std 22,176(%2)\n"
- "std 23,184(%2)\n"
- "std 24,192(%2)\n"
- "std 25,200(%2)\n"
- "std 26,208(%2)\n"
- "std 27,216(%2)\n"
- "std 28,224(%2)\n"
- "std 29,232(%2)\n"
- "std 30,240(%2)\n"
- "std 31,248(%2)\n"
- "mfmsr %0\n"
- "std %0, 264(%2)\n"
- "mfctr %0\n"
- "std %0, 280(%2)\n"
- "mflr %0\n"
- "std %0, 288(%2)\n"
- "bl 1f\n"
- "1: mflr %1\n"
- "std %1, 256(%2)\n"
- "mtlr %0\n"
- "mfxer %0\n"
- "std %0, 296(%2)\n"
- : "=&r" (tmp1), "=&r" (tmp2)
- : "b" (regs));
-}
-
-/* We may have saved_regs from where the error came from
- * or it is NULL if via a direct panic().
- */
-static void crash_save_self(struct pt_regs *saved_regs)
-{
- struct pt_regs regs;
- int cpu;
-
- cpu = smp_processor_id();
- if (saved_regs)
- memcpy(&regs, saved_regs, sizeof(regs));
- else
- crash_get_current_regs(&regs);
- crash_save_this_cpu(&regs, cpu);
-}
-
#ifdef CONFIG_SMP
static atomic_t waiting_for_crash_ipi;
@@ -260,5 +193,5 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
*/
crashing_cpu = smp_processor_id();
crash_kexec_prepare_cpus();
- crash_save_self(regs);
+ crash_save_this_cpu(regs, crashing_cpu);
}
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
new file mode 100644
index 000000000000..704c846b2b0f
--- /dev/null
+++ b/arch/powerpc/kernel/pci_32.c
@@ -0,0 +1,1897 @@
+/*
+ * Common pmac/prep/chrp pci routines. -- Cort
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/sections.h>
+#include <asm/pci-bridge.h>
+#include <asm/byteorder.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+unsigned long isa_io_base = 0;
+unsigned long isa_mem_base = 0;
+unsigned long pci_dram_offset = 0;
+int pcibios_assign_bus_offset = 1;
+
+void pcibios_make_OF_bus_map(void);
+
+static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
+static int probe_resource(struct pci_bus *parent, struct resource *pr,
+ struct resource *res, struct resource **conflict);
+static void update_bridge_base(struct pci_bus *bus, int i);
+static void pcibios_fixup_resources(struct pci_dev* dev);
+static void fixup_broken_pcnet32(struct pci_dev* dev);
+static int reparent_resources(struct resource *parent, struct resource *res);
+static void fixup_cpc710_pci64(struct pci_dev* dev);
+#ifdef CONFIG_PPC_OF
+static u8* pci_to_OF_bus_map;
+#endif
+
+/* By default, we don't re-assign bus numbers. We do this only on
+ * some pmacs
+ */
+int pci_assign_all_buses;
+
+struct pci_controller* hose_head;
+struct pci_controller** hose_tail = &hose_head;
+
+static int pci_bus_count;
+
+static void
+fixup_broken_pcnet32(struct pci_dev* dev)
+{
+ if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
+ dev->vendor = PCI_VENDOR_ID_AMD;
+ pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
+
+static void
+fixup_cpc710_pci64(struct pci_dev* dev)
+{
+ /* Hide the PCI64 BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ dev->resource[0].start = dev->resource[0].end = 0;
+ dev->resource[0].flags = 0;
+ dev->resource[1].start = dev->resource[1].end = 0;
+ dev->resource[1].flags = 0;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
+
+static void
+pcibios_fixup_resources(struct pci_dev *dev)
+{
+ struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
+ int i;
+ unsigned long offset;
+
+ if (!hose) {
+ printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
+ return;
+ }
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ struct resource *res = dev->resource + i;
+ if (!res->flags)
+ continue;
+ if (res->end == 0xffffffff) {
+ DBG("PCI:%s Resource %d [%08lx-%08lx] is unassigned\n",
+ pci_name(dev), i, res->start, res->end);
+ res->end -= res->start;
+ res->start = 0;
+ res->flags |= IORESOURCE_UNSET;
+ continue;
+ }
+ offset = 0;
+ if (res->flags & IORESOURCE_MEM) {
+ offset = hose->pci_mem_offset;
+ } else if (res->flags & IORESOURCE_IO) {
+ offset = (unsigned long) hose->io_base_virt
+ - isa_io_base;
+ }
+ if (offset != 0) {
+ res->start += offset;
+ res->end += offset;
+#ifdef DEBUG
+ printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
+ i, res->flags, pci_name(dev),
+ res->start - offset, res->start);
+#endif
+ }
+ }
+
+ /* Call machine specific resource fixup */
+ if (ppc_md.pcibios_fixup_resources)
+ ppc_md.pcibios_fixup_resources(dev);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
+
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res)
+{
+ unsigned long offset = 0;
+ struct pci_controller *hose = dev->sysdata;
+
+ if (hose && res->flags & IORESOURCE_IO)
+ offset = (unsigned long)hose->io_base_virt - isa_io_base;
+ else if (hose && res->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+ region->start = res->start - offset;
+ region->end = res->end - offset;
+}
+EXPORT_SYMBOL(pcibios_resource_to_bus);
+
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region)
+{
+ unsigned long offset = 0;
+ struct pci_controller *hose = dev->sysdata;
+
+ if (hose && res->flags & IORESOURCE_IO)
+ offset = (unsigned long)hose->io_base_virt - isa_io_base;
+ else if (hose && res->flags & IORESOURCE_MEM)
+ offset = hose->pci_mem_offset;
+ res->start = region->start + offset;
+ res->end = region->end + offset;
+}
+EXPORT_SYMBOL(pcibios_bus_to_resource);
+
+/*
+ * We need to avoid collisions with `mirrored' VGA ports
+ * and other strange ISA hardware, so we always want the
+ * addresses to be allocated in the 0x000-0x0ff region
+ * modulo 0x400.
+ *
+ * Why? Because some silly external IO cards only decode
+ * the low 10 bits of the IO address. The 0x00-0xff region
+ * is reserved for motherboard devices that decode all 16
+ * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
+ * but we want to try to avoid allocating at 0x2900-0x2bff
+ * which might have be mirrored at 0x0100-0x03ff..
+ */
+void pcibios_align_resource(void *data, struct resource *res, unsigned long size,
+ unsigned long align)
+{
+ struct pci_dev *dev = data;
+
+ if (res->flags & IORESOURCE_IO) {
+ unsigned long start = res->start;
+
+ if (size > 0x100) {
+ printk(KERN_ERR "PCI: I/O Region %s/%d too large"
+ " (%ld bytes)\n", pci_name(dev),
+ dev->resource - res, size);
+ }
+
+ if (start & 0x300) {
+ start = (start + 0x3ff) & ~0x3ff;
+ res->start = start;
+ }
+ }
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Handle resources of PCI devices. If the world were perfect, we could
+ * just allocate all the resource regions and do nothing more. It isn't.
+ * On the other hand, we cannot just re-allocate all devices, as it would
+ * require us to know lots of host bridge internals. So we attempt to
+ * keep as much of the original configuration as possible, but tweak it
+ * when it's found to be wrong.
+ *
+ * Known BIOS problems we have to work around:
+ * - I/O or memory regions not configured
+ * - regions configured, but not enabled in the command register
+ * - bogus I/O addresses above 64K used
+ * - expansion ROMs left enabled (this may sound harmless, but given
+ * the fact the PCI specs explicitly allow address decoders to be
+ * shared between expansion ROMs and other resource regions, it's
+ * at least dangerous)
+ *
+ * Our solution:
+ * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
+ * This gives us fixed barriers on where we can allocate.
+ * (2) Allocate resources for all enabled devices. If there is
+ * a collision, just mark the resource as unallocated. Also
+ * disable expansion ROMs during this step.
+ * (3) Try to allocate resources for disabled devices. If the
+ * resources were assigned correctly, everything goes well,
+ * if they weren't, they won't disturb allocation of other
+ * resources.
+ * (4) Assign new addresses to resources which were either
+ * not configured at all or misconfigured. If explicitly
+ * requested by the user, configure expansion ROM address
+ * as well.
+ */
+
+static void __init
+pcibios_allocate_bus_resources(struct list_head *bus_list)
+{
+ struct pci_bus *bus;
+ int i;
+ struct resource *res, *pr;
+
+ /* Depth-First Search on bus tree */
+ list_for_each_entry(bus, bus_list, node) {
+ for (i = 0; i < 4; ++i) {
+ if ((res = bus->resource[i]) == NULL || !res->flags
+ || res->start > res->end)
+ continue;
+ if (bus->parent == NULL)
+ pr = (res->flags & IORESOURCE_IO)?
+ &ioport_resource: &iomem_resource;
+ else {
+ pr = pci_find_parent_resource(bus->self, res);
+ if (pr == res) {
+ /* this happens when the generic PCI
+ * code (wrongly) decides that this
+ * bridge is transparent -- paulus
+ */
+ continue;
+ }
+ }
+
+ DBG("PCI: bridge rsrc %lx..%lx (%lx), parent %p\n",
+ res->start, res->end, res->flags, pr);
+ if (pr) {
+ if (request_resource(pr, res) == 0)
+ continue;
+ /*
+ * Must be a conflict with an existing entry.
+ * Move that entry (or entries) under the
+ * bridge resource and try again.
+ */
+ if (reparent_resources(pr, res) == 0)
+ continue;
+ }
+ printk(KERN_ERR "PCI: Cannot allocate resource region "
+ "%d of PCI bridge %d\n", i, bus->number);
+ if (pci_relocate_bridge_resource(bus, i))
+ bus->resource[i] = NULL;
+ }
+ pcibios_allocate_bus_resources(&bus->children);
+ }
+}
+
+/*
+ * Reparent resource children of pr that conflict with res
+ * under res, and make res replace those children.
+ */
+static int __init
+reparent_resources(struct resource *parent, struct resource *res)
+{
+ struct resource *p, **pp;
+ struct resource **firstpp = NULL;
+
+ for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
+ if (p->end < res->start)
+ continue;
+ if (res->end < p->start)
+ break;
+ if (p->start < res->start || p->end > res->end)
+ return -1; /* not completely contained */
+ if (firstpp == NULL)
+ firstpp = pp;
+ }
+ if (firstpp == NULL)
+ return -1; /* didn't find any conflicting entries? */
+ res->parent = parent;
+ res->child = *firstpp;
+ res->sibling = *pp;
+ *firstpp = res;
+ *pp = NULL;
+ for (p = res->child; p != NULL; p = p->sibling) {
+ p->parent = res;
+ DBG(KERN_INFO "PCI: reparented %s [%lx..%lx] under %s\n",
+ p->name, p->start, p->end, res->name);
+ }
+ return 0;
+}
+
+/*
+ * A bridge has been allocated a range which is outside the range
+ * of its parent bridge, so it needs to be moved.
+ */
+static int __init
+pci_relocate_bridge_resource(struct pci_bus *bus, int i)
+{
+ struct resource *res, *pr, *conflict;
+ unsigned long try, size;
+ int j;
+ struct pci_bus *parent = bus->parent;
+
+ if (parent == NULL) {
+ /* shouldn't ever happen */
+ printk(KERN_ERR "PCI: can't move host bridge resource\n");
+ return -1;
+ }
+ res = bus->resource[i];
+ if (res == NULL)
+ return -1;
+ pr = NULL;
+ for (j = 0; j < 4; j++) {
+ struct resource *r = parent->resource[j];
+ if (!r)
+ continue;
+ if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
+ continue;
+ if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
+ pr = r;
+ break;
+ }
+ if (res->flags & IORESOURCE_PREFETCH)
+ pr = r;
+ }
+ if (pr == NULL)
+ return -1;
+ size = res->end - res->start;
+ if (pr->start > pr->end || size > pr->end - pr->start)
+ return -1;
+ try = pr->end;
+ for (;;) {
+ res->start = try - size;
+ res->end = try;
+ if (probe_resource(bus->parent, pr, res, &conflict) == 0)
+ break;
+ if (conflict->start <= pr->start + size)
+ return -1;
+ try = conflict->start - 1;
+ }
+ if (request_resource(pr, res)) {
+ DBG(KERN_ERR "PCI: huh? couldn't move to %lx..%lx\n",
+ res->start, res->end);
+ return -1; /* "can't happen" */
+ }
+ update_bridge_base(bus, i);
+ printk(KERN_INFO "PCI: bridge %d resource %d moved to %lx..%lx\n",
+ bus->number, i, res->start, res->end);
+ return 0;
+}
+
+static int __init
+probe_resource(struct pci_bus *parent, struct resource *pr,
+ struct resource *res, struct resource **conflict)
+{
+ struct pci_bus *bus;
+ struct pci_dev *dev;
+ struct resource *r;
+ int i;
+
+ for (r = pr->child; r != NULL; r = r->sibling) {
+ if (r->end >= res->start && res->end >= r->start) {
+ *conflict = r;
+ return 1;
+ }
+ }
+ list_for_each_entry(bus, &parent->children, node) {
+ for (i = 0; i < 4; ++i) {
+ if ((r = bus->resource[i]) == NULL)
+ continue;
+ if (!r->flags || r->start > r->end || r == res)
+ continue;
+ if (pci_find_parent_resource(bus->self, r) != pr)
+ continue;
+ if (r->end >= res->start && res->end >= r->start) {
+ *conflict = r;
+ return 1;
+ }
+ }
+ }
+ list_for_each_entry(dev, &parent->devices, bus_list) {
+ for (i = 0; i < 6; ++i) {
+ r = &dev->resource[i];
+ if (!r->flags || (r->flags & IORESOURCE_UNSET))
+ continue;
+ if (pci_find_parent_resource(dev, r) != pr)
+ continue;
+ if (r->end >= res->start && res->end >= r->start) {
+ *conflict = r;
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+static void __init
+update_bridge_base(struct pci_bus *bus, int i)
+{
+ struct resource *res = bus->resource[i];
+ u8 io_base_lo, io_limit_lo;
+ u16 mem_base, mem_limit;
+ u16 cmd;
+ unsigned long start, end, off;
+ struct pci_dev *dev = bus->self;
+ struct pci_controller *hose = dev->sysdata;
+
+ if (!hose) {
+ printk("update_bridge_base: no hose?\n");
+ return;
+ }
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ pci_write_config_word(dev, PCI_COMMAND,
+ cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
+ if (res->flags & IORESOURCE_IO) {
+ off = (unsigned long) hose->io_base_virt - isa_io_base;
+ start = res->start - off;
+ end = res->end - off;
+ io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
+ io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
+ if (end > 0xffff) {
+ pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
+ start >> 16);
+ pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
+ end >> 16);
+ io_base_lo |= PCI_IO_RANGE_TYPE_32;
+ } else
+ io_base_lo |= PCI_IO_RANGE_TYPE_16;
+ pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
+ pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
+
+ } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+ == IORESOURCE_MEM) {
+ off = hose->pci_mem_offset;
+ mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+ mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
+ pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
+ pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
+
+ } else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
+ == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
+ off = hose->pci_mem_offset;
+ mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
+ mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
+
+ } else {
+ DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
+ pci_name(dev), i, res->flags);
+ }
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+}
+
+static inline void alloc_resource(struct pci_dev *dev, int idx)
+{
+ struct resource *pr, *r = &dev->resource[idx];
+
+ DBG("PCI:%s: Resource %d: %08lx-%08lx (f=%lx)\n",
+ pci_name(dev), idx, r->start, r->end, r->flags);
+ pr = pci_find_parent_resource(dev, r);
+ if (!pr || request_resource(pr, r) < 0) {
+ printk(KERN_ERR "PCI: Cannot allocate resource region %d"
+ " of device %s\n", idx, pci_name(dev));
+ if (pr)
+ DBG("PCI: parent is %p: %08lx-%08lx (f=%lx)\n",
+ pr, pr->start, pr->end, pr->flags);
+ /* We'll assign a new address later */
+ r->flags |= IORESOURCE_UNSET;
+ r->end -= r->start;
+ r->start = 0;
+ }
+}
+
+static void __init
+pcibios_allocate_resources(int pass)
+{
+ struct pci_dev *dev = NULL;
+ int idx, disabled;
+ u16 command;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ pci_read_config_word(dev, PCI_COMMAND, &command);
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+ if (r->parent) /* Already allocated */
+ continue;
+ if (!r->flags || (r->flags & IORESOURCE_UNSET))
+ continue; /* Not assigned at all */
+ if (r->flags & IORESOURCE_IO)
+ disabled = !(command & PCI_COMMAND_IO);
+ else
+ disabled = !(command & PCI_COMMAND_MEMORY);
+ if (pass == disabled)
+ alloc_resource(dev, idx);
+ }
+ if (pass)
+ continue;
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ if (r->flags & IORESOURCE_ROM_ENABLE) {
+ /* Turn the ROM off, leave the resource region, but keep it unregistered. */
+ u32 reg;
+ DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_read_config_dword(dev, dev->rom_base_reg, &reg);
+ pci_write_config_dword(dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
+ }
+}
+
+static void __init
+pcibios_assign_resources(void)
+{
+ struct pci_dev *dev = NULL;
+ int idx;
+ struct resource *r;
+
+ for_each_pci_dev(dev) {
+ int class = dev->class >> 8;
+
+ /* Don't touch classless devices and host bridges */
+ if (!class || class == PCI_CLASS_BRIDGE_HOST)
+ continue;
+
+ for (idx = 0; idx < 6; idx++) {
+ r = &dev->resource[idx];
+
+ /*
+ * We shall assign a new address to this resource,
+ * either because the BIOS (sic) forgot to do so
+ * or because we have decided the old address was
+ * unusable for some reason.
+ */
+ if ((r->flags & IORESOURCE_UNSET) && r->end &&
+ (!ppc_md.pcibios_enable_device_hook ||
+ !ppc_md.pcibios_enable_device_hook(dev, 1))) {
+ r->flags &= ~IORESOURCE_UNSET;
+ pci_assign_resource(dev, idx);
+ }
+ }
+
+#if 0 /* don't assign ROMs */
+ r = &dev->resource[PCI_ROM_RESOURCE];
+ r->end -= r->start;
+ r->start = 0;
+ if (r->end)
+ pci_assign_resource(dev, PCI_ROM_RESOURCE);
+#endif
+ }
+}
+
+
+int
+pcibios_enable_resources(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx=0; idx<6; idx++) {
+ /* Only set up the requested stuff */
+ if (!(mask & (1<<idx)))
+ continue;
+
+ r = &dev->resource[idx];
+ if (r->flags & IORESOURCE_UNSET) {
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ cmd |= PCI_COMMAND_MEMORY;
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+static int next_controller_index;
+
+struct pci_controller * __init
+pcibios_alloc_controller(void)
+{
+ struct pci_controller *hose;
+
+ hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
+ memset(hose, 0, sizeof(struct pci_controller));
+
+ *hose_tail = hose;
+ hose_tail = &hose->next;
+
+ hose->index = next_controller_index++;
+
+ return hose;
+}
+
+#ifdef CONFIG_PPC_OF
+/*
+ * Functions below are used on OpenFirmware machines.
+ */
+static void
+make_one_node_map(struct device_node* node, u8 pci_bus)
+{
+ int *bus_range;
+ int len;
+
+ if (pci_bus >= pci_bus_count)
+ return;
+ bus_range = (int *) get_property(node, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, "
+ "assuming it starts at 0\n", node->full_name);
+ pci_to_OF_bus_map[pci_bus] = 0;
+ } else
+ pci_to_OF_bus_map[pci_bus] = bus_range[0];
+
+ for (node=node->child; node != 0;node = node->sibling) {
+ struct pci_dev* dev;
+ unsigned int *class_code, *reg;
+
+ class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ reg = (unsigned int *)get_property(node, "reg", NULL);
+ if (!reg)
+ continue;
+ dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff));
+ if (!dev || !dev->subordinate)
+ continue;
+ make_one_node_map(node, dev->subordinate->number);
+ }
+}
+
+void
+pcibios_make_OF_bus_map(void)
+{
+ int i;
+ struct pci_controller* hose;
+ u8* of_prop_map;
+
+ pci_to_OF_bus_map = (u8*)kmalloc(pci_bus_count, GFP_KERNEL);
+ if (!pci_to_OF_bus_map) {
+ printk(KERN_ERR "Can't allocate OF bus map !\n");
+ return;
+ }
+
+ /* We fill the bus map with invalid values, that helps
+ * debugging.
+ */
+ for (i=0; i<pci_bus_count; i++)
+ pci_to_OF_bus_map[i] = 0xff;
+
+ /* For each hose, we begin searching bridges */
+ for(hose=hose_head; hose; hose=hose->next) {
+ struct device_node* node;
+ node = (struct device_node *)hose->arch_data;
+ if (!node)
+ continue;
+ make_one_node_map(node, hose->first_busno);
+ }
+ of_prop_map = get_property(find_path_device("/"), "pci-OF-bus-map", NULL);
+ if (of_prop_map)
+ memcpy(of_prop_map, pci_to_OF_bus_map, pci_bus_count);
+#ifdef DEBUG
+ printk("PCI->OF bus map:\n");
+ for (i=0; i<pci_bus_count; i++) {
+ if (pci_to_OF_bus_map[i] == 0xff)
+ continue;
+ printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
+ }
+#endif
+}
+
+typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
+
+static struct device_node*
+scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
+{
+ struct device_node* sub_node;
+
+ for (; node != 0;node = node->sibling) {
+ unsigned int *class_code;
+
+ if (filter(node, data))
+ return node;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down
+ * Note: some OFs create a parent node "multifunc-device" as
+ * a fake root for all functions of a multi-function device,
+ * we go down them as well.
+ */
+ class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
+ strcmp(node->name, "multifunc-device"))
+ continue;
+ sub_node = scan_OF_pci_childs(node->child, filter, data);
+ if (sub_node)
+ return sub_node;
+ }
+ return NULL;
+}
+
+static int
+scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+{
+ unsigned int *reg;
+ u8* fdata = (u8*)data;
+
+ reg = (unsigned int *) get_property(node, "reg", NULL);
+ if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
+ && ((reg[0] >> 16) & 0xff) == fdata[0])
+ return 1;
+ return 0;
+}
+
+static struct device_node*
+scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
+{
+ u8 filter_data[2] = {bus, dev_fn};
+
+ return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+}
+
+/*
+ * Scans the OF tree for a device node matching a PCI device
+ */
+struct device_node *
+pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
+{
+ struct pci_controller *hose;
+ struct device_node *node;
+ int busnr;
+
+ if (!have_of)
+ return NULL;
+
+ /* Lookup the hose */
+ busnr = bus->number;
+ hose = pci_bus_to_hose(busnr);
+ if (!hose)
+ return NULL;
+
+ /* Check it has an OF node associated */
+ node = (struct device_node *) hose->arch_data;
+ if (!node)
+ return NULL;
+
+ /* Fixup bus number according to what OF think it is. */
+#ifdef CONFIG_PPC_PMAC
+ /* The G5 need a special case here. Basically, we don't remap all
+ * busses on it so we don't create the pci-OF-map. However, we do
+ * remap the AGP bus and so have to deal with it. A future better
+ * fix has to be done by making the remapping per-host and always
+ * filling the pci_to_OF map. --BenH
+ */
+ if (_machine == _MACH_Pmac && busnr >= 0xf0)
+ busnr -= 0xf0;
+ else
+#endif
+ if (pci_to_OF_bus_map)
+ busnr = pci_to_OF_bus_map[busnr];
+ if (busnr == 0xff)
+ return NULL;
+
+ /* Now, lookup childs of the hose */
+ return scan_OF_childs_for_device(node->child, busnr, devfn);
+}
+EXPORT_SYMBOL(pci_busdev_to_OF_node);
+
+struct device_node*
+pci_device_to_OF_node(struct pci_dev *dev)
+{
+ return pci_busdev_to_OF_node(dev->bus, dev->devfn);
+}
+EXPORT_SYMBOL(pci_device_to_OF_node);
+
+/* This routine is meant to be used early during boot, when the
+ * PCI bus numbers have not yet been assigned, and you need to
+ * issue PCI config cycles to an OF device.
+ * It could also be used to "fix" RTAS config cycles if you want
+ * to set pci_assign_all_buses to 1 and still use RTAS for PCI
+ * config cycles.
+ */
+struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
+{
+ if (!have_of)
+ return NULL;
+ while(node) {
+ struct pci_controller* hose;
+ for (hose=hose_head;hose;hose=hose->next)
+ if (hose->arch_data == node)
+ return hose;
+ node=node->parent;
+ }
+ return NULL;
+}
+
+static int
+find_OF_pci_device_filter(struct device_node* node, void* data)
+{
+ return ((void *)node == data);
+}
+
+/*
+ * Returns the PCI device matching a given OF node
+ */
+int
+pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
+{
+ unsigned int *reg;
+ struct pci_controller* hose;
+ struct pci_dev* dev = NULL;
+
+ if (!have_of)
+ return -ENODEV;
+ /* Make sure it's really a PCI device */
+ hose = pci_find_hose_for_OF_device(node);
+ if (!hose || !hose->arch_data)
+ return -ENODEV;
+ if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
+ find_OF_pci_device_filter, (void *)node))
+ return -ENODEV;
+ reg = (unsigned int *) get_property(node, "reg", NULL);
+ if (!reg)
+ return -ENODEV;
+ *bus = (reg[0] >> 16) & 0xff;
+ *devfn = ((reg[0] >> 8) & 0xff);
+
+ /* Ok, here we need some tweak. If we have already renumbered
+ * all busses, we can't rely on the OF bus number any more.
+ * the pci_to_OF_bus_map is not enough as several PCI busses
+ * may match the same OF bus number.
+ */
+ if (!pci_to_OF_bus_map)
+ return 0;
+
+ for_each_pci_dev(dev)
+ if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
+ dev->devfn == *devfn) {
+ *bus = dev->bus->number;
+ pci_dev_put(dev);
+ return 0;
+ }
+
+ return -ENODEV;
+}
+EXPORT_SYMBOL(pci_device_from_OF_node);
+
+void __init
+pci_process_bridge_OF_ranges(struct pci_controller *hose,
+ struct device_node *dev, int primary)
+{
+ static unsigned int static_lc_ranges[256] __initdata;
+ unsigned int *dt_ranges, *lc_ranges, *ranges, *prev;
+ unsigned int size;
+ int rlen = 0, orig_rlen;
+ int memno = 0;
+ struct resource *res;
+ int np, na = prom_n_addr_cells(dev);
+ np = na + 5;
+
+ /* First we try to merge ranges to fix a problem with some pmacs
+ * that can have more than 3 ranges, fortunately using contiguous
+ * addresses -- BenH
+ */
+ dt_ranges = (unsigned int *) get_property(dev, "ranges", &rlen);
+ if (!dt_ranges)
+ return;
+ /* Sanity check, though hopefully that never happens */
+ if (rlen > sizeof(static_lc_ranges)) {
+ printk(KERN_WARNING "OF ranges property too large !\n");
+ rlen = sizeof(static_lc_ranges);
+ }
+ lc_ranges = static_lc_ranges;
+ memcpy(lc_ranges, dt_ranges, rlen);
+ orig_rlen = rlen;
+
+ /* Let's work on a copy of the "ranges" property instead of damaging
+ * the device-tree image in memory
+ */
+ ranges = lc_ranges;
+ prev = NULL;
+ while ((rlen -= np * sizeof(unsigned int)) >= 0) {
+ if (prev) {
+ if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
+ (prev[2] + prev[na+4]) == ranges[2] &&
+ (prev[na+2] + prev[na+4]) == ranges[na+2]) {
+ prev[na+4] += ranges[na+4];
+ ranges[0] = 0;
+ ranges += np;
+ continue;
+ }
+ }
+ prev = ranges;
+ ranges += np;
+ }
+
+ /*
+ * The ranges property is laid out as an array of elements,
+ * each of which comprises:
+ * cells 0 - 2: a PCI address
+ * cells 3 or 3+4: a CPU physical address
+ * (size depending on dev->n_addr_cells)
+ * cells 4+5 or 5+6: the size of the range
+ */
+ ranges = lc_ranges;
+ rlen = orig_rlen;
+ while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
+ res = NULL;
+ size = ranges[na+4];
+ switch ((ranges[0] >> 24) & 0x3) {
+ case 1: /* I/O space */
+ if (ranges[2] != 0)
+ break;
+ hose->io_base_phys = ranges[na+2];
+ /* limit I/O space to 16MB */
+ if (size > 0x01000000)
+ size = 0x01000000;
+ hose->io_base_virt = ioremap(ranges[na+2], size);
+ if (primary)
+ isa_io_base = (unsigned long) hose->io_base_virt;
+ res = &hose->io_resource;
+ res->flags = IORESOURCE_IO;
+ res->start = ranges[2];
+ DBG("PCI: IO 0x%lx -> 0x%lx\n",
+ res->start, res->start + size - 1);
+ break;
+ case 2: /* memory space */
+ memno = 0;
+ if (ranges[1] == 0 && ranges[2] == 0
+ && ranges[na+4] <= (16 << 20)) {
+ /* 1st 16MB, i.e. ISA memory area */
+ if (primary)
+ isa_mem_base = ranges[na+2];
+ memno = 1;
+ }
+ while (memno < 3 && hose->mem_resources[memno].flags)
+ ++memno;
+ if (memno == 0)
+ hose->pci_mem_offset = ranges[na+2] - ranges[2];
+ if (memno < 3) {
+ res = &hose->mem_resources[memno];
+ res->flags = IORESOURCE_MEM;
+ if(ranges[0] & 0x40000000)
+ res->flags |= IORESOURCE_PREFETCH;
+ res->start = ranges[na+2];
+ DBG("PCI: MEM[%d] 0x%lx -> 0x%lx\n", memno,
+ res->start, res->start + size - 1);
+ }
+ break;
+ }
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->end = res->start + size - 1;
+ res->parent = NULL;
+ res->sibling = NULL;
+ res->child = NULL;
+ }
+ ranges += np;
+ }
+}
+
+/* We create the "pci-OF-bus-map" property now so it appears in the
+ * /proc device tree
+ */
+void __init
+pci_create_OF_bus_map(void)
+{
+ struct property* of_prop;
+
+ of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
+ if (of_prop && find_path_device("/")) {
+ memset(of_prop, -1, sizeof(struct property) + 256);
+ of_prop->name = "pci-OF-bus-map";
+ of_prop->length = 256;
+ of_prop->value = (unsigned char *)&of_prop[1];
+ prom_add_property(find_path_device("/"), of_prop);
+ }
+}
+
+static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pci_dev *pdev;
+ struct device_node *np;
+
+ pdev = to_pci_dev (dev);
+ np = pci_device_to_OF_node(pdev);
+ if (np == NULL || np->full_name == NULL)
+ return 0;
+ return sprintf(buf, "%s", np->full_name);
+}
+static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
+
+#else /* CONFIG_PPC_OF */
+void pcibios_make_OF_bus_map(void)
+{
+}
+#endif /* CONFIG_PPC_OF */
+
+/* Add sysfs properties */
+void pcibios_add_platform_entries(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PPC_OF
+ device_create_file(&pdev->dev, &dev_attr_devspec);
+#endif /* CONFIG_PPC_OF */
+}
+
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * This set of routines checks for PCI<->PCI bridges that have closed
+ * IO resources and have child devices. It tries to re-open an IO
+ * window on them.
+ *
+ * This is a _temporary_ fix to workaround a problem with Apple's OF
+ * closing IO windows on P2P bridges when the OF drivers of cards
+ * below this bridge don't claim any IO range (typically ATI or
+ * Adaptec).
+ *
+ * A more complete fix would be to use drivers/pci/setup-bus.c, which
+ * involves a working pcibios_fixup_pbus_ranges(), some more care about
+ * ordering when creating the host bus resources, and maybe a few more
+ * minor tweaks
+ */
+
+/* Initialize bridges with base/limit values we have collected */
+static void __init
+do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
+{
+ struct pci_dev *bridge = bus->self;
+ struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
+ u32 l;
+ u16 w;
+ struct resource res;
+
+ if (bus->resource[0] == NULL)
+ return;
+ res = *(bus->resource[0]);
+
+ DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
+ res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
+ res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
+ DBG(" IO window: %08lx-%08lx\n", res.start, res.end);
+
+ /* Set up the top and bottom of the PCI I/O segment for this bus. */
+ pci_read_config_dword(bridge, PCI_IO_BASE, &l);
+ l &= 0xffff000f;
+ l |= (res.start >> 8) & 0x00f0;
+ l |= res.end & 0xf000;
+ pci_write_config_dword(bridge, PCI_IO_BASE, l);
+
+ if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+ l = (res.start >> 16) | (res.end & 0xffff0000);
+ pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
+ }
+
+ pci_read_config_word(bridge, PCI_COMMAND, &w);
+ w |= PCI_COMMAND_IO;
+ pci_write_config_word(bridge, PCI_COMMAND, w);
+
+#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
+ if (enable_vga) {
+ pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
+ w |= PCI_BRIDGE_CTL_VGA;
+ pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
+ }
+#endif
+}
+
+/* This function is pretty basic and actually quite broken for the
+ * general case, it's enough for us right now though. It's supposed
+ * to tell us if we need to open an IO range at all or not and what
+ * size.
+ */
+static int __init
+check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
+{
+ struct pci_dev *dev;
+ int i;
+ int rc = 0;
+
+#define push_end(res, size) do { unsigned long __sz = (size) ; \
+ res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
+ } while (0)
+
+ list_for_each_entry(dev, &bus->devices, bus_list) {
+ u16 class = dev->class >> 8;
+
+ if (class == PCI_CLASS_DISPLAY_VGA ||
+ class == PCI_CLASS_NOT_DEFINED_VGA)
+ *found_vga = 1;
+ if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
+ rc |= check_for_io_childs(dev->subordinate, res, found_vga);
+ if (class == PCI_CLASS_BRIDGE_CARDBUS)
+ push_end(res, 0xfff);
+
+ for (i=0; i<PCI_NUM_RESOURCES; i++) {
+ struct resource *r;
+ unsigned long r_size;
+
+ if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
+ && i >= PCI_BRIDGE_RESOURCES)
+ continue;
+ r = &dev->resource[i];
+ r_size = r->end - r->start;
+ if (r_size < 0xfff)
+ r_size = 0xfff;
+ if (r->flags & IORESOURCE_IO && (r_size) != 0) {
+ rc = 1;
+ push_end(res, r_size);
+ }
+ }
+ }
+
+ return rc;
+}
+
+/* Here we scan all P2P bridges of a given level that have a closed
+ * IO window. Note that the test for the presence of a VGA card should
+ * be improved to take into account already configured P2P bridges,
+ * currently, we don't see them and might end up configuring 2 bridges
+ * with VGA pass through enabled
+ */
+static void __init
+do_fixup_p2p_level(struct pci_bus *bus)
+{
+ struct pci_bus *b;
+ int i, parent_io;
+ int has_vga = 0;
+
+ for (parent_io=0; parent_io<4; parent_io++)
+ if (bus->resource[parent_io]
+ && bus->resource[parent_io]->flags & IORESOURCE_IO)
+ break;
+ if (parent_io >= 4)
+ return;
+
+ list_for_each_entry(b, &bus->children, node) {
+ struct pci_dev *d = b->self;
+ struct pci_controller* hose = (struct pci_controller *)d->sysdata;
+ struct resource *res = b->resource[0];
+ struct resource tmp_res;
+ unsigned long max;
+ int found_vga = 0;
+
+ memset(&tmp_res, 0, sizeof(tmp_res));
+ tmp_res.start = bus->resource[parent_io]->start;
+
+ /* We don't let low addresses go through that closed P2P bridge, well,
+ * that may not be necessary but I feel safer that way
+ */
+ if (tmp_res.start == 0)
+ tmp_res.start = 0x1000;
+
+ if (!list_empty(&b->devices) && res && res->flags == 0 &&
+ res != bus->resource[parent_io] &&
+ (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ check_for_io_childs(b, &tmp_res, &found_vga)) {
+ u8 io_base_lo;
+
+ printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
+
+ if (found_vga) {
+ if (has_vga) {
+ printk(KERN_WARNING "Skipping VGA, already active"
+ " on bus segment\n");
+ found_vga = 0;
+ } else
+ has_vga = 1;
+ }
+ pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
+
+ if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
+ max = ((unsigned long) hose->io_base_virt
+ - isa_io_base) + 0xffffffff;
+ else
+ max = ((unsigned long) hose->io_base_virt
+ - isa_io_base) + 0xffff;
+
+ *res = tmp_res;
+ res->flags = IORESOURCE_IO;
+ res->name = b->name;
+
+ /* Find a resource in the parent where we can allocate */
+ for (i = 0 ; i < 4; i++) {
+ struct resource *r = bus->resource[i];
+ if (!r)
+ continue;
+ if ((r->flags & IORESOURCE_IO) == 0)
+ continue;
+ DBG("Trying to allocate from %08lx, size %08lx from parent"
+ " res %d: %08lx -> %08lx\n",
+ res->start, res->end, i, r->start, r->end);
+
+ if (allocate_resource(r, res, res->end + 1, res->start, max,
+ res->end + 1, NULL, NULL) < 0) {
+ DBG("Failed !\n");
+ continue;
+ }
+ do_update_p2p_io_resource(b, found_vga);
+ break;
+ }
+ }
+ do_fixup_p2p_level(b);
+ }
+}
+
+static void
+pcibios_fixup_p2p_bridges(void)
+{
+ struct pci_bus *b;
+
+ list_for_each_entry(b, &pci_root_buses, node)
+ do_fixup_p2p_level(b);
+}
+
+#endif /* CONFIG_PPC_PMAC */
+
+static int __init
+pcibios_init(void)
+{
+ struct pci_controller *hose;
+ struct pci_bus *bus;
+ int next_busno;
+
+ printk(KERN_INFO "PCI: Probing PCI hardware\n");
+
+ /* Scan all of the recorded PCI controllers. */
+ for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
+ if (pci_assign_all_buses)
+ hose->first_busno = next_busno;
+ hose->last_busno = 0xff;
+ bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
+ hose->last_busno = bus->subordinate;
+ if (pci_assign_all_buses || next_busno <= hose->last_busno)
+ next_busno = hose->last_busno + pcibios_assign_bus_offset;
+ }
+ pci_bus_count = next_busno;
+
+ /* OpenFirmware based machines need a map of OF bus
+ * numbers vs. kernel bus numbers since we may have to
+ * remap them.
+ */
+ if (pci_assign_all_buses && have_of)
+ pcibios_make_OF_bus_map();
+
+ /* Do machine dependent PCI interrupt routing */
+ if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
+ pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
+
+ /* Call machine dependent fixup */
+ if (ppc_md.pcibios_fixup)
+ ppc_md.pcibios_fixup();
+
+ /* Allocate and assign resources */
+ pcibios_allocate_bus_resources(&pci_root_buses);
+ pcibios_allocate_resources(0);
+ pcibios_allocate_resources(1);
+#ifdef CONFIG_PPC_PMAC
+ pcibios_fixup_p2p_bridges();
+#endif /* CONFIG_PPC_PMAC */
+ pcibios_assign_resources();
+
+ /* Call machine dependent post-init code */
+ if (ppc_md.pcibios_after_init)
+ ppc_md.pcibios_after_init();
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+unsigned char __init
+common_swizzle(struct pci_dev *dev, unsigned char *pinp)
+{
+ struct pci_controller *hose = dev->sysdata;
+
+ if (dev->bus->number != hose->first_busno) {
+ u8 pin = *pinp;
+ do {
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ } while (dev->bus->self);
+ *pinp = pin;
+
+ /* The slot is the idsel of the last bridge. */
+ }
+ return PCI_SLOT(dev->devfn);
+}
+
+unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
+ unsigned long start, unsigned long size)
+{
+ return start;
+}
+
+void __init pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
+ unsigned long io_offset;
+ struct resource *res;
+ int i;
+
+ io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+ if (bus->parent == NULL) {
+ /* This is a host bridge - fill in its resources */
+ hose->bus = bus;
+
+ bus->resource[0] = res = &hose->io_resource;
+ if (!res->flags) {
+ if (io_offset)
+ printk(KERN_ERR "I/O resource not set for host"
+ " bridge %d\n", hose->index);
+ res->start = 0;
+ res->end = IO_SPACE_LIMIT;
+ res->flags = IORESOURCE_IO;
+ }
+ res->start += io_offset;
+ res->end += io_offset;
+
+ for (i = 0; i < 3; ++i) {
+ res = &hose->mem_resources[i];
+ if (!res->flags) {
+ if (i > 0)
+ continue;
+ printk(KERN_ERR "Memory resource not set for "
+ "host bridge %d\n", hose->index);
+ res->start = hose->pci_mem_offset;
+ res->end = ~0U;
+ res->flags = IORESOURCE_MEM;
+ }
+ bus->resource[i+1] = res;
+ }
+ } else {
+ /* This is a subordinate bridge */
+ pci_read_bridge_bases(bus);
+
+ for (i = 0; i < 4; ++i) {
+ if ((res = bus->resource[i]) == NULL)
+ continue;
+ if (!res->flags)
+ continue;
+ if (io_offset && (res->flags & IORESOURCE_IO)) {
+ res->start += io_offset;
+ res->end += io_offset;
+ } else if (hose->pci_mem_offset
+ && (res->flags & IORESOURCE_MEM)) {
+ res->start += hose->pci_mem_offset;
+ res->end += hose->pci_mem_offset;
+ }
+ }
+ }
+
+ if (ppc_md.pcibios_fixup_bus)
+ ppc_md.pcibios_fixup_bus(bus);
+}
+
+char __init *pcibios_setup(char *str)
+{
+ return str;
+}
+
+/* the next one is stolen from the alpha port... */
+void __init
+pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+ /* XXX FIXME - update OF device tree node interrupt property */
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ int idx;
+ struct resource *r;
+
+ if (ppc_md.pcibios_enable_device_hook)
+ if (ppc_md.pcibios_enable_device_hook(dev, 0))
+ return -EINVAL;
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ for (idx=0; idx<6; idx++) {
+ r = &dev->resource[idx];
+ if (r->flags & IORESOURCE_UNSET) {
+ printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ if (cmd != old_cmd) {
+ printk("PCI: Enabling device %s (%04x -> %04x)\n",
+ pci_name(dev), old_cmd, cmd);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ }
+ return 0;
+}
+
+struct pci_controller*
+pci_bus_to_hose(int bus)
+{
+ struct pci_controller* hose = hose_head;
+
+ for (; hose; hose = hose->next)
+ if (bus >= hose->first_busno && bus <= hose->last_busno)
+ return hose;
+ return NULL;
+}
+
+void __iomem *
+pci_bus_io_base(unsigned int bus)
+{
+ struct pci_controller *hose;
+
+ hose = pci_bus_to_hose(bus);
+ if (!hose)
+ return NULL;
+ return hose->io_base_virt;
+}
+
+unsigned long
+pci_bus_io_base_phys(unsigned int bus)
+{
+ struct pci_controller *hose;
+
+ hose = pci_bus_to_hose(bus);
+ if (!hose)
+ return 0;
+ return hose->io_base_phys;
+}
+
+unsigned long
+pci_bus_mem_base_phys(unsigned int bus)
+{
+ struct pci_controller *hose;
+
+ hose = pci_bus_to_hose(bus);
+ if (!hose)
+ return 0;
+ return hose->pci_mem_offset;
+}
+
+unsigned long
+pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
+{
+ /* Hack alert again ! See comments in chrp_pci.c
+ */
+ struct pci_controller* hose =
+ (struct pci_controller *)pdev->sysdata;
+ if (hose && res->flags & IORESOURCE_MEM)
+ return res->start - hose->pci_mem_offset;
+ /* We may want to do something with IOs here... */
+ return res->start;
+}
+
+
+static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
+ unsigned long *offset,
+ enum pci_mmap_state mmap_state)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+ unsigned long io_offset = 0;
+ int i, res_bit;
+
+ if (hose == 0)
+ return NULL; /* should never happen */
+
+ /* If memory, add on the PCI bridge address offset */
+ if (mmap_state == pci_mmap_mem) {
+ *offset += hose->pci_mem_offset;
+ res_bit = IORESOURCE_MEM;
+ } else {
+ io_offset = hose->io_base_virt - ___IO_BASE;
+ *offset += io_offset;
+ res_bit = IORESOURCE_IO;
+ }
+
+ /*
+ * Check that the offset requested corresponds to one of the
+ * resources of the device.
+ */
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *rp = &dev->resource[i];
+ int flags = rp->flags;
+
+ /* treat ROM as memory (should be already) */
+ if (i == PCI_ROM_RESOURCE)
+ flags |= IORESOURCE_MEM;
+
+ /* Active and same type? */
+ if ((flags & res_bit) == 0)
+ continue;
+
+ /* In the range of this resource? */
+ if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
+ continue;
+
+ /* found it! construct the final physical address */
+ if (mmap_state == pci_mmap_io)
+ *offset += hose->io_base_phys - io_offset;
+ return rp;
+ }
+
+ return NULL;
+}
+
+/*
+ * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
+ * device mapping.
+ */
+static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
+ pgprot_t protection,
+ enum pci_mmap_state mmap_state,
+ int write_combine)
+{
+ unsigned long prot = pgprot_val(protection);
+
+ /* Write combine is always 0 on non-memory space mappings. On
+ * memory space, if the user didn't pass 1, we check for a
+ * "prefetchable" resource. This is a bit hackish, but we use
+ * this to workaround the inability of /sysfs to provide a write
+ * combine bit
+ */
+ if (mmap_state != pci_mmap_mem)
+ write_combine = 0;
+ else if (write_combine == 0) {
+ if (rp->flags & IORESOURCE_PREFETCH)
+ write_combine = 1;
+ }
+
+ /* XXX would be nice to have a way to ask for write-through */
+ prot |= _PAGE_NO_CACHE;
+ if (write_combine)
+ prot &= ~_PAGE_GUARDED;
+ else
+ prot |= _PAGE_GUARDED;
+
+ printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
+ prot);
+
+ return __pgprot(prot);
+}
+
+/*
+ * This one is used by /dev/mem and fbdev who have no clue about the
+ * PCI device, it tries to find the PCI device first and calls the
+ * above routine
+ */
+pgprot_t pci_phys_mem_access_prot(struct file *file,
+ unsigned long pfn,
+ unsigned long size,
+ pgprot_t protection)
+{
+ struct pci_dev *pdev = NULL;
+ struct resource *found = NULL;
+ unsigned long prot = pgprot_val(protection);
+ unsigned long offset = pfn << PAGE_SHIFT;
+ int i;
+
+ if (page_is_ram(pfn))
+ return prot;
+
+ prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+
+ for_each_pci_dev(pdev) {
+ for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
+ struct resource *rp = &pdev->resource[i];
+ int flags = rp->flags;
+
+ /* Active and same type? */
+ if ((flags & IORESOURCE_MEM) == 0)
+ continue;
+ /* In the range of this resource? */
+ if (offset < (rp->start & PAGE_MASK) ||
+ offset > rp->end)
+ continue;
+ found = rp;
+ break;
+ }
+ if (found)
+ break;
+ }
+ if (found) {
+ if (found->flags & IORESOURCE_PREFETCH)
+ prot &= ~_PAGE_GUARDED;
+ pci_dev_put(pdev);
+ }
+
+ DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
+
+ return __pgprot(prot);
+}
+
+
+/*
+ * Perform the actual remap of the pages for a PCI device mapping, as
+ * appropriate for this architecture. The region in the process to map
+ * is described by vm_start and vm_end members of VMA, the base physical
+ * address is found in vm_pgoff.
+ * The pci device structure is provided so that architectures may make mapping
+ * decisions on a per-device or per-bus basis.
+ *
+ * Returns a negative error code on failure, zero on success.
+ */
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+ enum pci_mmap_state mmap_state,
+ int write_combine)
+{
+ unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+ struct resource *rp;
+ int ret;
+
+ rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
+ if (rp == NULL)
+ return -EINVAL;
+
+ vma->vm_pgoff = offset >> PAGE_SHIFT;
+ vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO;
+ vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
+ vma->vm_page_prot,
+ mmap_state, write_combine);
+
+ ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+ vma->vm_end - vma->vm_start, vma->vm_page_prot);
+
+ return ret;
+}
+
+/* Obsolete functions. Should be removed once the symbios driver
+ * is fixed
+ */
+unsigned long
+phys_to_bus(unsigned long pa)
+{
+ struct pci_controller *hose;
+ int i;
+
+ for (hose = hose_head; hose; hose = hose->next) {
+ for (i = 0; i < 3; ++i) {
+ if (pa >= hose->mem_resources[i].start
+ && pa <= hose->mem_resources[i].end) {
+ /*
+ * XXX the hose->pci_mem_offset really
+ * only applies to mem_resources[0].
+ * We need a way to store an offset for
+ * the others. -- paulus
+ */
+ if (i == 0)
+ pa -= hose->pci_mem_offset;
+ return pa;
+ }
+ }
+ }
+ /* hmmm, didn't find it */
+ return 0;
+}
+
+unsigned long
+pci_phys_to_bus(unsigned long pa, int busnr)
+{
+ struct pci_controller* hose = pci_bus_to_hose(busnr);
+ if (!hose)
+ return pa;
+ return pa - hose->pci_mem_offset;
+}
+
+unsigned long
+pci_bus_to_phys(unsigned int ba, int busnr)
+{
+ struct pci_controller* hose = pci_bus_to_hose(busnr);
+ if (!hose)
+ return ba;
+ return ba + hose->pci_mem_offset;
+}
+
+/* Provide information on locations of various I/O regions in physical
+ * memory. Do this on a per-card basis so that we choose the right
+ * root bridge.
+ * Note that the returned IO or memory base is a physical address
+ */
+
+long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
+{
+ struct pci_controller* hose;
+ long result = -EOPNOTSUPP;
+
+ /* Argh ! Please forgive me for that hack, but that's the
+ * simplest way to get existing XFree to not lockup on some
+ * G5 machines... So when something asks for bus 0 io base
+ * (bus 0 is HT root), we return the AGP one instead.
+ */
+#ifdef CONFIG_PPC_PMAC
+ if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
+ if (bus == 0)
+ bus = 0xf0;
+#endif /* CONFIG_PPC_PMAC */
+
+ hose = pci_bus_to_hose(bus);
+ if (!hose)
+ return -ENODEV;
+
+ switch (which) {
+ case IOBASE_BRIDGE_NUMBER:
+ return (long)hose->first_busno;
+ case IOBASE_MEMORY:
+ return (long)hose->pci_mem_offset;
+ case IOBASE_IO:
+ return (long)hose->io_base_phys;
+ case IOBASE_ISA_IO:
+ return (long)isa_io_base;
+ case IOBASE_ISA_MEM:
+ return (long)isa_mem_base;
+ }
+
+ return result;
+}
+
+void pci_resource_to_user(const struct pci_dev *dev, int bar,
+ const struct resource *rsrc,
+ u64 *start, u64 *end)
+{
+ struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+ unsigned long offset = 0;
+
+ if (hose == NULL)
+ return;
+
+ if (rsrc->flags & IORESOURCE_IO)
+ offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+
+ *start = rsrc->start + offset;
+ *end = rsrc->end + offset;
+}
+
+void __init
+pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
+ int flags, char *name)
+{
+ res->start = start;
+ res->end = end;
+ res->flags = flags;
+ res->name = name;
+ res->parent = NULL;
+ res->sibling = NULL;
+ res->child = NULL;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len)
+ return NULL;
+ if (max && len > max)
+ len = max;
+ if (flags & IORESOURCE_IO)
+ return ioport_map(start, len);
+ if (flags & IORESOURCE_MEM)
+ /* Not checking IORESOURCE_CACHEABLE because PPC does
+ * not currently distinguish between ioremap and
+ * ioremap_nocache.
+ */
+ return ioremap(start, len);
+ /* What? */
+ return NULL;
+}
+
+void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
+{
+ /* Nothing to do */
+}
+EXPORT_SYMBOL(pci_iomap);
+EXPORT_SYMBOL(pci_iounmap);
+
+unsigned long pci_address_to_pio(phys_addr_t address)
+{
+ struct pci_controller* hose = hose_head;
+
+ for (; hose; hose = hose->next) {
+ unsigned int size = hose->io_resource.end -
+ hose->io_resource.start + 1;
+ if (address >= hose->io_base_phys &&
+ address < (hose->io_base_phys + size)) {
+ unsigned long base =
+ (unsigned long)hose->io_base_virt - _IO_BASE;
+ return base + (address - hose->io_base_phys);
+ }
+ }
+ return (unsigned int)-1;
+}
+EXPORT_SYMBOL(pci_address_to_pio);
+
+/*
+ * Null PCI config access functions, for the case when we can't
+ * find a hose.
+ */
+#define NULL_PCI_OP(rw, size, type) \
+static int \
+null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
+{ \
+ return PCIBIOS_DEVICE_NOT_FOUND; \
+}
+
+static int
+null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static int
+null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ return PCIBIOS_DEVICE_NOT_FOUND;
+}
+
+static struct pci_ops null_pci_ops =
+{
+ null_read_config,
+ null_write_config
+};
+
+/*
+ * These functions are used early on before PCI scanning is done
+ * and all of the pci_dev and pci_bus structures have been created.
+ */
+static struct pci_bus *
+fake_pci_bus(struct pci_controller *hose, int busnr)
+{
+ static struct pci_bus bus;
+
+ if (hose == 0) {
+ hose = pci_bus_to_hose(busnr);
+ if (hose == 0)
+ printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
+ }
+ bus.number = busnr;
+ bus.sysdata = hose;
+ bus.ops = hose? hose->ops: &null_pci_ops;
+ return &bus;
+}
+
+#define EARLY_PCI_OP(rw, size, type) \
+int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
+ int devfn, int offset, type value) \
+{ \
+ return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
+ devfn, offset, value); \
+}
+
+EARLY_PCI_OP(read, byte, u8 *)
+EARLY_PCI_OP(read, word, u16 *)
+EARLY_PCI_OP(read, dword, u32 *)
+EARLY_PCI_OP(write, byte, u8)
+EARLY_PCI_OP(write, word, u16)
+EARLY_PCI_OP(write, dword, u32)
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index d963a12ec640..7881ec96ef11 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -605,7 +605,8 @@ static void __init early_cmdline_parse(void)
opt = strstr(RELOC(prom_cmd_line), RELOC("crashkernel="));
if (opt) {
opt += 12;
- RELOC(prom_crashk_size) = prom_memparse(opt, &opt);
+ RELOC(prom_crashk_size) =
+ prom_memparse(opt, (const char **)&opt);
if (ALIGN(RELOC(prom_crashk_size), 0x1000000) !=
RELOC(prom_crashk_size)) {
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index f40451da037c..7d4099a34f92 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -316,7 +316,6 @@ static int __init add_bridge(struct device_node *dev)
char* disp_name;
int *bus_range;
int primary = 1;
- struct property *of_prop;
DBG("Adding PCI host bridge %s\n", dev->full_name);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index a1cb4d236720..ec5c1e10c407 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -71,38 +71,60 @@
#define DBG(fmt...)
#endif
+static unsigned long maple_find_nvram_base(void)
+{
+ struct device_node *rtcs;
+ unsigned long result = 0;
+
+ /* find NVRAM device */
+ rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
+ if (rtcs) {
+ struct resource r;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ printk(KERN_EMERG "Maple: Unable to translate NVRAM"
+ " address\n");
+ goto bail;
+ }
+ if (!(r.flags & IORESOURCE_IO)) {
+ printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
+ goto bail;
+ }
+ result = r.start;
+ } else
+ printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ bail:
+ of_node_put(rtcs);
+ return result;
+}
+
static void maple_restart(char *cmd)
{
unsigned int maple_nvram_base;
unsigned int maple_nvram_offset;
unsigned int maple_nvram_command;
- struct device_node *rtcs;
+ struct device_node *sp;
- /* find NVRAM device */
- rtcs = find_compatible_devices("nvram", "AMD8111");
- if (rtcs && rtcs->addrs) {
- maple_nvram_base = rtcs->addrs[0].address;
- } else {
- printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
- printk(KERN_EMERG "Maple: Manual Restart Required\n");
- return;
- }
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
/* find service processor device */
- rtcs = find_devices("service-processor");
- if (!rtcs) {
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
- printk(KERN_EMERG "Maple: Manual Restart Required\n");
- return;
+ goto fail;
}
- maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+ maple_nvram_offset = *(unsigned int*) get_property(sp,
"restart-addr", NULL);
- maple_nvram_command = *(unsigned int*) get_property(rtcs,
+ maple_nvram_command = *(unsigned int*) get_property(sp,
"restart-value", NULL);
+ of_node_put(sp);
/* send command */
outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Restart Required\n");
}
static void maple_power_off(void)
@@ -110,33 +132,29 @@ static void maple_power_off(void)
unsigned int maple_nvram_base;
unsigned int maple_nvram_offset;
unsigned int maple_nvram_command;
- struct device_node *rtcs;
+ struct device_node *sp;
- /* find NVRAM device */
- rtcs = find_compatible_devices("nvram", "AMD8111");
- if (rtcs && rtcs->addrs) {
- maple_nvram_base = rtcs->addrs[0].address;
- } else {
- printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
- printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
- return;
- }
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
/* find service processor device */
- rtcs = find_devices("service-processor");
- if (!rtcs) {
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
- printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
- return;
+ goto fail;
}
- maple_nvram_offset = *(unsigned int*) get_property(rtcs,
+ maple_nvram_offset = *(unsigned int*) get_property(sp,
"power-off-addr", NULL);
- maple_nvram_command = *(unsigned int*) get_property(rtcs,
+ maple_nvram_command = *(unsigned int*) get_property(sp,
"power-off-value", NULL);
+ of_node_put(sp);
/* send command */
outb_p(maple_nvram_command, maple_nvram_base + maple_nvram_offset);
for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
}
static void maple_halt(void)
@@ -179,9 +197,6 @@ void __init maple_setup_arch(void)
*/
static void __init maple_init_early(void)
{
- unsigned int default_speed;
- u64 physport;
-
DBG(" -> maple_init_early\n");
/* Initialize hash table, from now on, we can take hash faults
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 15846cc938ac..50bc4eb85353 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -168,11 +168,24 @@ unsigned long __init maple_get_boot_time(void)
struct rtc_time tm;
struct device_node *rtcs;
- rtcs = find_compatible_devices("rtc", "pnpPNP,b00");
- if (rtcs && rtcs->addrs) {
- maple_rtc_addr = rtcs->addrs[0].address;
- printk(KERN_INFO "Maple: Found RTC at 0x%x\n", maple_rtc_addr);
- } else {
+ rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00");
+ if (rtcs) {
+ struct resource r;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ printk(KERN_EMERG "Maple: Unable to translate RTC"
+ " address\n");
+ goto bail;
+ }
+ if (!(r.flags & IORESOURCE_IO)) {
+ printk(KERN_EMERG "Maple: RTC address isn't PIO!\n");
+ goto bail;
+ }
+ maple_rtc_addr = r.start;
+ printk(KERN_INFO "Maple: Found RTC at IO 0x%x\n",
+ maple_rtc_addr);
+ }
+ bail:
+ if (maple_rtc_addr == 0) {
maple_rtc_addr = RTC_PORT(0); /* legacy address */
printk(KERN_INFO "Maple: No device node for RTC, assuming "
"legacy address (0x%x)\n", maple_rtc_addr);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 12:48:49 +0000