summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/wsp/wsp_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/wsp/wsp_pci.c')
-rw-r--r--arch/powerpc/platforms/wsp/wsp_pci.c1133
1 files changed, 1133 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/wsp/wsp_pci.c b/arch/powerpc/platforms/wsp/wsp_pci.c
new file mode 100644
index 000000000000..e0262cd0e2d3
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp_pci.c
@@ -0,0 +1,1133 @@
+/*
+ * Copyright 2010 Ben Herrenschmidt, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/debugfs.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/ppc-pci.h>
+#include <asm/iommu.h>
+#include <asm/io-workarounds.h>
+
+#include "wsp.h"
+#include "wsp_pci.h"
+#include "msi.h"
+
+
+/* Max number of TVTs for one table. Only 32-bit tables can use
+ * multiple TVTs and so the max currently supported is thus 8
+ * since only 2G of DMA space is supported
+ */
+#define MAX_TABLE_TVT_COUNT 8
+
+struct wsp_dma_table {
+ struct list_head link;
+ struct iommu_table table;
+ struct wsp_phb *phb;
+ struct page *tces[MAX_TABLE_TVT_COUNT];
+};
+
+/* We support DMA regions from 0...2G in 32bit space (no support for
+ * 64-bit DMA just yet). Each device gets a separate TCE table (TVT
+ * entry) with validation enabled (though not supported by SimiCS
+ * just yet).
+ *
+ * To simplify things, we divide this 2G space into N regions based
+ * on the constant below which could be turned into a tunable eventually
+ *
+ * We then assign dynamically those regions to devices as they show up.
+ *
+ * We use a bitmap as an allocator for these.
+ *
+ * Tables are allocated/created dynamically as devices are discovered,
+ * multiple TVT entries are used if needed
+ *
+ * When 64-bit DMA support is added we should simply use a separate set
+ * of larger regions (the HW supports 64 TVT entries). We can
+ * additionally create a bypass region in 64-bit space for performances
+ * though that would have a cost in term of security.
+ *
+ * If you set NUM_DMA32_REGIONS to 1, then a single table is shared
+ * for all devices and bus/dev/fn validation is disabled
+ *
+ * Note that a DMA32 region cannot be smaller than 256M so the max
+ * supported here for now is 8. We don't yet support sharing regions
+ * between multiple devices so the max number of devices supported
+ * is MAX_TABLE_TVT_COUNT.
+ */
+#define NUM_DMA32_REGIONS 1
+
+struct wsp_phb {
+ struct pci_controller *hose;
+
+ /* Lock controlling access to the list of dma tables.
+ * It does -not- protect against dma_* operations on
+ * those tables, those should be stopped before an entry
+ * is removed from the list.
+ *
+ * The lock is also used for error handling operations
+ */
+ spinlock_t lock;
+ struct list_head dma_tables;
+ unsigned long dma32_map;
+ unsigned long dma32_base;
+ unsigned int dma32_num_regions;
+ unsigned long dma32_region_size;
+
+ /* Debugfs stuff */
+ struct dentry *ddir;
+
+ struct list_head all;
+};
+static LIST_HEAD(wsp_phbs);
+
+//#define cfg_debug(fmt...) pr_debug(fmt)
+#define cfg_debug(fmt...)
+
+
+static int wsp_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 *val)
+{
+ struct pci_controller *hose;
+ int suboff;
+ u64 addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = PCIE_REG_CA_ENABLE |
+ ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+ ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+ ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+ suboff = offset & 3;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+
+ switch (len) {
+ case 1:
+ addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+ >> (suboff << 3)) & 0xff;
+ cfg_debug("read 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ case 2:
+ addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = (in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA)
+ >> (suboff << 3)) & 0xffff;
+ cfg_debug("read 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ default:
+ addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ *val = in_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA);
+ cfg_debug("read 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, *val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int wsp_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int len, u32 val)
+{
+ struct pci_controller *hose;
+ int suboff;
+ u64 addr;
+
+ hose = pci_bus_to_host(bus);
+ if (hose == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset >= 0x1000)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ addr = PCIE_REG_CA_ENABLE |
+ ((u64)bus->number) << PCIE_REG_CA_BUS_SHIFT |
+ ((u64)devfn) << PCIE_REG_CA_FUNC_SHIFT |
+ ((u64)offset & ~3) << PCIE_REG_CA_REG_SHIFT;
+ suboff = offset & 3;
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ addr |= (0x8ul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ val <<= suboff << 3;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 1 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%02x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ case 2:
+ addr |= (0xcul >> suboff) << PCIE_REG_CA_BE_SHIFT;
+ val <<= suboff << 3;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 2 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%04x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ default:
+ addr |= 0xful << PCIE_REG_CA_BE_SHIFT;
+ out_be64(hose->cfg_data + PCIE_REG_CONFIG_ADDRESS, addr);
+ out_le32(hose->cfg_data + PCIE_REG_CONFIG_DATA, val);
+ cfg_debug("write 4 %02x:%02x:%02x + %02x/%x addr=0x%llx val=%08x\n",
+ bus->number, devfn >> 3, devfn & 7,
+ offset, suboff, addr, val);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops wsp_pcie_pci_ops =
+{
+ .read = wsp_pcie_read_config,
+ .write = wsp_pcie_write_config,
+};
+
+#define TCE_SHIFT 12
+#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
+#define TCE_PCI_WRITE 0x2 /* write from PCI allowed */
+#define TCE_PCI_READ 0x1 /* read from PCI allowed */
+#define TCE_RPN_MASK 0x3fffffffffful /* 42-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT 12
+
+//#define dma_debug(fmt...) pr_debug(fmt)
+#define dma_debug(fmt...)
+
+static int tce_build_wsp(struct iommu_table *tbl, long index, long npages,
+ unsigned long uaddr, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
+{
+ struct wsp_dma_table *ptbl = container_of(tbl,
+ struct wsp_dma_table,
+ table);
+ u64 proto_tce;
+ u64 *tcep;
+ u64 rpn;
+
+ proto_tce = TCE_PCI_READ;
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ proto_tce |= TCE_PCI_WRITE;
+#else
+ if (direction != DMA_TO_DEVICE)
+ proto_tce |= TCE_PCI_WRITE;
+#endif
+
+ /* XXX Make this faster by factoring out the page address for
+ * within a TCE table
+ */
+ while (npages--) {
+ /* We don't use it->base as the table can be scattered */
+ tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+ tcep += (index & 0xffff);
+
+ /* can't move this out since we might cross LMB boundary */
+ rpn = __pa(uaddr) >> TCE_SHIFT;
+ *tcep = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
+
+ dma_debug("[DMA] TCE %p set to 0x%016llx (dma addr: 0x%lx)\n",
+ tcep, *tcep, (tbl->it_offset + index) << IOMMU_PAGE_SHIFT);
+
+ uaddr += TCE_PAGE_SIZE;
+ index++;
+ }
+ return 0;
+}
+
+static void tce_free_wsp(struct iommu_table *tbl, long index, long npages)
+{
+ struct wsp_dma_table *ptbl = container_of(tbl,
+ struct wsp_dma_table,
+ table);
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ struct pci_controller *hose = ptbl->phb->hose;
+#endif
+ u64 *tcep;
+
+ /* XXX Make this faster by factoring out the page address for
+ * within a TCE table. Also use line-kill option to kill multiple
+ * TCEs at once
+ */
+ while (npages--) {
+ /* We don't use it->base as the table can be scattered */
+ tcep = (u64 *)page_address(ptbl->tces[index >> 16]);
+ tcep += (index & 0xffff);
+ dma_debug("[DMA] TCE %p cleared\n", tcep);
+ *tcep = 0;
+#ifndef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ /* Don't write there since it would pollute other MMIO accesses */
+ out_be64(hose->cfg_data + PCIE_REG_TCE_KILL,
+ PCIE_REG_TCEKILL_SINGLE | PCIE_REG_TCEKILL_PS_4K |
+ (__pa(tcep) & PCIE_REG_TCEKILL_ADDR_MASK));
+#endif
+ index++;
+ }
+}
+
+static struct wsp_dma_table *wsp_pci_create_dma32_table(struct wsp_phb *phb,
+ unsigned int region,
+ struct pci_dev *validate)
+{
+ struct pci_controller *hose = phb->hose;
+ unsigned long size = phb->dma32_region_size;
+ unsigned long addr = phb->dma32_region_size * region + phb->dma32_base;
+ struct wsp_dma_table *tbl;
+ int tvts_per_table, i, tvt, nid;
+ unsigned long flags;
+
+ nid = of_node_to_nid(phb->hose->dn);
+
+ /* Calculate how many TVTs are needed */
+ tvts_per_table = size / 0x10000000;
+ if (tvts_per_table == 0)
+ tvts_per_table = 1;
+
+ /* Calculate the base TVT index. We know all tables have the same
+ * size so we just do a simple multiply here
+ */
+ tvt = region * tvts_per_table;
+
+ pr_debug(" Region : %d\n", region);
+ pr_debug(" DMA range : 0x%08lx..0x%08lx\n", addr, addr + size - 1);
+ pr_debug(" Number of TVTs : %d\n", tvts_per_table);
+ pr_debug(" Base TVT : %d\n", tvt);
+ pr_debug(" Node : %d\n", nid);
+
+ tbl = kzalloc_node(sizeof(struct wsp_dma_table), GFP_KERNEL, nid);
+ if (!tbl)
+ return ERR_PTR(-ENOMEM);
+ tbl->phb = phb;
+
+ /* Create as many TVTs as needed, each represents 256M at most */
+ for (i = 0; i < tvts_per_table; i++) {
+ u64 tvt_data1, tvt_data0;
+
+ /* Allocate table. We use a 4K TCE size for now always so
+ * one table is always 8 * (258M / 4K) == 512K
+ */
+ tbl->tces[i] = alloc_pages_node(nid, GFP_KERNEL, get_order(0x80000));
+ if (tbl->tces[i] == NULL)
+ goto fail;
+ memset(page_address(tbl->tces[i]), 0, 0x80000);
+
+ pr_debug(" TCE table %d at : %p\n", i, page_address(tbl->tces[i]));
+
+ /* Table size. We currently set it to be the whole 256M region */
+ tvt_data0 = 2ull << IODA_TVT0_TCE_TABLE_SIZE_SHIFT;
+ /* IO page size set to 4K */
+ tvt_data1 = 1ull << IODA_TVT1_IO_PAGE_SIZE_SHIFT;
+ /* Shift in the address */
+ tvt_data0 |= __pa(page_address(tbl->tces[i])) << IODA_TVT0_TTA_SHIFT;
+
+ /* Validation stuff. We only validate fully bus/dev/fn for now
+ * one day maybe we can group devices but that isn't the case
+ * at the moment
+ */
+ if (validate) {
+ tvt_data0 |= IODA_TVT0_BUSNUM_VALID_MASK;
+ tvt_data0 |= validate->bus->number;
+ tvt_data1 |= IODA_TVT1_DEVNUM_VALID;
+ tvt_data1 |= ((u64)PCI_SLOT(validate->devfn))
+ << IODA_TVT1_DEVNUM_VALUE_SHIFT;
+ tvt_data1 |= IODA_TVT1_FUNCNUM_VALID;
+ tvt_data1 |= ((u64)PCI_FUNC(validate->devfn))
+ << IODA_TVT1_FUNCNUM_VALUE_SHIFT;
+ }
+
+ /* XX PE number is always 0 for now */
+
+ /* Program the values using the PHB lock */
+ spin_lock_irqsave(&phb->lock, flags);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+ (tvt + i) | PCIE_REG_IODA_AD_TBL_TVT);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, tvt_data1);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, tvt_data0);
+ spin_unlock_irqrestore(&phb->lock, flags);
+ }
+
+ /* Init bits and pieces */
+ tbl->table.it_blocksize = 16;
+ tbl->table.it_offset = addr >> IOMMU_PAGE_SHIFT;
+ tbl->table.it_size = size >> IOMMU_PAGE_SHIFT;
+
+ /*
+ * It's already blank but we clear it anyway.
+ * Consider an aditiona interface that makes cleaing optional
+ */
+ iommu_init_table(&tbl->table, nid);
+
+ list_add(&tbl->link, &phb->dma_tables);
+ return tbl;
+
+ fail:
+ pr_debug(" Failed to allocate a 256M TCE table !\n");
+ for (i = 0; i < tvts_per_table; i++)
+ if (tbl->tces[i])
+ __free_pages(tbl->tces[i], get_order(0x80000));
+ kfree(tbl);
+ return ERR_PTR(-ENOMEM);
+}
+
+static void __devinit wsp_pci_dma_dev_setup(struct pci_dev *pdev)
+{
+ struct dev_archdata *archdata = &pdev->dev.archdata;
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct wsp_phb *phb = hose->private_data;
+ struct wsp_dma_table *table = NULL;
+ unsigned long flags;
+ int i;
+
+ /* Don't assign an iommu table to a bridge */
+ if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
+ return;
+
+ pr_debug("%s: Setting up DMA...\n", pci_name(pdev));
+
+ spin_lock_irqsave(&phb->lock, flags);
+
+ /* If only one region, check if it already exist */
+ if (phb->dma32_num_regions == 1) {
+ spin_unlock_irqrestore(&phb->lock, flags);
+ if (list_empty(&phb->dma_tables))
+ table = wsp_pci_create_dma32_table(phb, 0, NULL);
+ else
+ table = list_first_entry(&phb->dma_tables,
+ struct wsp_dma_table,
+ link);
+ } else {
+ /* else find a free region */
+ for (i = 0; i < phb->dma32_num_regions && !table; i++) {
+ if (__test_and_set_bit(i, &phb->dma32_map))
+ continue;
+ spin_unlock_irqrestore(&phb->lock, flags);
+ table = wsp_pci_create_dma32_table(phb, i, pdev);
+ }
+ }
+
+ /* Check if we got an error */
+ if (IS_ERR(table)) {
+ pr_err("%s: Failed to create DMA table, err %ld !\n",
+ pci_name(pdev), PTR_ERR(table));
+ return;
+ }
+
+ /* Or a valid table */
+ if (table) {
+ pr_info("%s: Setup iommu: 32-bit DMA region 0x%08lx..0x%08lx\n",
+ pci_name(pdev),
+ table->table.it_offset << IOMMU_PAGE_SHIFT,
+ (table->table.it_offset << IOMMU_PAGE_SHIFT)
+ + phb->dma32_region_size - 1);
+ archdata->dma_data.iommu_table_base = &table->table;
+ return;
+ }
+
+ /* Or no room */
+ spin_unlock_irqrestore(&phb->lock, flags);
+ pr_err("%s: Out of DMA space !\n", pci_name(pdev));
+}
+
+static void __init wsp_pcie_configure_hw(struct pci_controller *hose)
+{
+ u64 val;
+ int i;
+
+#define DUMP_REG(x) \
+ pr_debug("%-30s : 0x%016llx\n", #x, in_be64(hose->cfg_data + x))
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS
+ /* WSP DD1 has a bogus class code by default in the PCI-E
+ * root complex's built-in P2P bridge */
+ val = in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1);
+ pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", val);
+ out_be64(hose->cfg_data + PCIE_REG_SYS_CFG1,
+ (val & ~PCIE_REG_SYS_CFG1_CLASS_CODE) | (PCI_CLASS_BRIDGE_PCI << 8));
+ pr_debug("PCI-E SYS_CFG1 : 0x%llx\n", in_be64(hose->cfg_data + PCIE_REG_SYS_CFG1));
+#endif /* CONFIG_WSP_DD1_WORKAROUND_BAD_PCIE_CLASS */
+
+#ifdef CONFIG_WSP_DD1_WORKAROUND_DD1_TCE_BUGS
+ /* XXX Disable TCE caching, it doesn't work on DD1 */
+ out_be64(hose->cfg_data + 0xe50,
+ in_be64(hose->cfg_data + 0xe50) | (3ull << 62));
+ printk("PCI-E DEBUG CONTROL 5 = 0x%llx\n", in_be64(hose->cfg_data + 0xe50));
+#endif
+
+ /* Configure M32A and IO. IO is hard wired to be 1M for now */
+ out_be64(hose->cfg_data + PCIE_REG_IO_BASE_ADDR, hose->io_base_phys);
+ out_be64(hose->cfg_data + PCIE_REG_IO_BASE_MASK,
+ (~(hose->io_resource.end - hose->io_resource.start)) &
+ 0x3fffffff000ul);
+ out_be64(hose->cfg_data + PCIE_REG_IO_START_ADDR, 0 | 1);
+
+ out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_ADDR,
+ hose->mem_resources[0].start);
+ printk("Want to write to M32A_BASE_MASK : 0x%llx\n",
+ (~(hose->mem_resources[0].end -
+ hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+ out_be64(hose->cfg_data + PCIE_REG_M32A_BASE_MASK,
+ (~(hose->mem_resources[0].end -
+ hose->mem_resources[0].start)) & 0x3ffffff0000ul);
+ out_be64(hose->cfg_data + PCIE_REG_M32A_START_ADDR,
+ (hose->mem_resources[0].start - hose->pci_mem_offset) | 1);
+
+ /* Clear all TVT entries
+ *
+ * XX Might get TVT count from device-tree
+ */
+ for (i = 0; i < IODA_TVT_COUNT; i++) {
+ out_be64(hose->cfg_data + PCIE_REG_IODA_ADDR,
+ PCIE_REG_IODA_AD_TBL_TVT | i);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA1, 0);
+ out_be64(hose->cfg_data + PCIE_REG_IODA_DATA0, 0);
+ }
+
+ /* Kill the TCE cache */
+ out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG,
+ in_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG) |
+ PCIE_REG_PHBC_64B_TCE_EN);
+
+ /* Enable 32 & 64-bit MSIs, IO space and M32A */
+ val = PCIE_REG_PHBC_32BIT_MSI_EN |
+ PCIE_REG_PHBC_IO_EN |
+ PCIE_REG_PHBC_64BIT_MSI_EN |
+ PCIE_REG_PHBC_M32A_EN;
+ if (iommu_is_off)
+ val |= PCIE_REG_PHBC_DMA_XLATE_BYPASS;
+ pr_debug("Will write config: 0x%llx\n", val);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_CONFIG, val);
+
+ /* Enable error reporting */
+ out_be64(hose->cfg_data + 0xe00,
+ in_be64(hose->cfg_data + 0xe00) | 0x0008000000000000ull);
+
+ /* Mask an error that's generated when doing config space probe
+ *
+ * XXX Maybe we should only mask it around config space cycles... that or
+ * ignore it when we know we had a config space cycle recently ?
+ */
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS_MASK, 0x8000000000000000ull);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS_MASK, 0x8000000000000000ull);
+
+ /* Enable UTL errors, for now, all of them got to UTL irq 1
+ *
+ * We similarily mask one UTL error caused apparently during normal
+ * probing. We also mask the link up error
+ */
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_ERR_SEV, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_RC_ERR_SEVERITY, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_ERROR_SEV, 0);
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_IRQ_EN, 0xffffffff00000000ull);
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_IRQ_EN, 0xff5fffff00000000ull);
+ out_be64(hose->cfg_data + PCIE_UTL_EP_ERR_IRQ_EN, 0xffffffff00000000ull);
+
+ DUMP_REG(PCIE_REG_IO_BASE_ADDR);
+ DUMP_REG(PCIE_REG_IO_BASE_MASK);
+ DUMP_REG(PCIE_REG_IO_START_ADDR);
+ DUMP_REG(PCIE_REG_M32A_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M32A_BASE_MASK);
+ DUMP_REG(PCIE_REG_M32A_START_ADDR);
+ DUMP_REG(PCIE_REG_M32B_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M32B_BASE_MASK);
+ DUMP_REG(PCIE_REG_M32B_START_ADDR);
+ DUMP_REG(PCIE_REG_M64_BASE_ADDR);
+ DUMP_REG(PCIE_REG_M64_BASE_MASK);
+ DUMP_REG(PCIE_REG_M64_START_ADDR);
+ DUMP_REG(PCIE_REG_PHB_CONFIG);
+}
+
+static void wsp_pci_wait_io_idle(struct wsp_phb *phb, unsigned long port)
+{
+ u64 val;
+ int i;
+
+ for (i = 0; i < 10000; i++) {
+ val = in_be64(phb->hose->cfg_data + 0xe08);
+ if ((val & 0x1900000000000000ull) == 0x0100000000000000ull)
+ return;
+ udelay(1);
+ }
+ pr_warning("PCI IO timeout on domain %d port 0x%lx\n",
+ phb->hose->global_number, port);
+}
+
+#define DEF_PCI_AC_RET_pio(name, ret, at, al, aa) \
+static ret wsp_pci_##name at \
+{ \
+ struct iowa_bus *bus; \
+ struct wsp_phb *phb; \
+ unsigned long flags; \
+ ret rval; \
+ bus = iowa_pio_find_bus(aa); \
+ WARN_ON(!bus); \
+ phb = bus->private; \
+ spin_lock_irqsave(&phb->lock, flags); \
+ wsp_pci_wait_io_idle(phb, aa); \
+ rval = __do_##name al; \
+ spin_unlock_irqrestore(&phb->lock, flags); \
+ return rval; \
+}
+
+#define DEF_PCI_AC_NORET_pio(name, at, al, aa) \
+static void wsp_pci_##name at \
+{ \
+ struct iowa_bus *bus; \
+ struct wsp_phb *phb; \
+ unsigned long flags; \
+ bus = iowa_pio_find_bus(aa); \
+ WARN_ON(!bus); \
+ phb = bus->private; \
+ spin_lock_irqsave(&phb->lock, flags); \
+ wsp_pci_wait_io_idle(phb, aa); \
+ __do_##name al; \
+ spin_unlock_irqrestore(&phb->lock, flags); \
+}
+
+#define DEF_PCI_AC_RET_mem(name, ret, at, al, aa)
+#define DEF_PCI_AC_NORET_mem(name, at, al, aa)
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
+ DEF_PCI_AC_RET_##space(name, ret, at, al, aa)
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa) \
+ DEF_PCI_AC_NORET_##space(name, at, al, aa) \
+
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+static struct ppc_pci_io wsp_pci_iops = {
+ .inb = wsp_pci_inb,
+ .inw = wsp_pci_inw,
+ .inl = wsp_pci_inl,
+ .outb = wsp_pci_outb,
+ .outw = wsp_pci_outw,
+ .outl = wsp_pci_outl,
+ .insb = wsp_pci_insb,
+ .insw = wsp_pci_insw,
+ .insl = wsp_pci_insl,
+ .outsb = wsp_pci_outsb,
+ .outsw = wsp_pci_outsw,
+ .outsl = wsp_pci_outsl,
+};
+
+static int __init wsp_setup_one_phb(struct device_node *np)
+{
+ struct pci_controller *hose;
+ struct wsp_phb *phb;
+
+ pr_info("PCI: Setting up PCIe host bridge 0x%s\n", np->full_name);
+
+ phb = zalloc_maybe_bootmem(sizeof(struct wsp_phb), GFP_KERNEL);
+ if (!phb)
+ return -ENOMEM;
+ hose = pcibios_alloc_controller(np);
+ if (!hose) {
+ /* Can't really free the phb */
+ return -ENOMEM;
+ }
+ hose->private_data = phb;
+ phb->hose = hose;
+
+ INIT_LIST_HEAD(&phb->dma_tables);
+ spin_lock_init(&phb->lock);
+
+ /* XXX Use bus-range property ? */
+ hose->first_busno = 0;
+ hose->last_busno = 0xff;
+
+ /* We use cfg_data as the address for the whole bridge MMIO space
+ */
+ hose->cfg_data = of_iomap(hose->dn, 0);
+
+ pr_debug("PCIe registers mapped at 0x%p\n", hose->cfg_data);
+
+ /* Get the ranges of the device-tree */
+ pci_process_bridge_OF_ranges(hose, np, 0);
+
+ /* XXX Force re-assigning of everything for now */
+ pci_add_flags(PCI_REASSIGN_ALL_BUS | PCI_REASSIGN_ALL_RSRC |
+ PCI_ENABLE_PROC_DOMAINS);
+ pci_probe_only = 0;
+
+ /* Calculate how the TCE space is divided */
+ phb->dma32_base = 0;
+ phb->dma32_num_regions = NUM_DMA32_REGIONS;
+ if (phb->dma32_num_regions > MAX_TABLE_TVT_COUNT) {
+ pr_warning("IOMMU: Clamped to %d DMA32 regions\n",
+ MAX_TABLE_TVT_COUNT);
+ phb->dma32_num_regions = MAX_TABLE_TVT_COUNT;
+ }
+ phb->dma32_region_size = 0x80000000 / phb->dma32_num_regions;
+
+ BUG_ON(!is_power_of_2(phb->dma32_region_size));
+
+ /* Setup config ops */
+ hose->ops = &wsp_pcie_pci_ops;
+
+ /* Configure the HW */
+ wsp_pcie_configure_hw(hose);
+
+ /* Instanciate IO workarounds */
+ iowa_register_bus(hose, &wsp_pci_iops, NULL, phb);
+#ifdef CONFIG_PCI_MSI
+ wsp_setup_phb_msi(hose);
+#endif
+
+ /* Add to global list */
+ list_add(&phb->all, &wsp_phbs);
+
+ return 0;
+}
+
+void __init wsp_setup_pci(void)
+{
+ struct device_node *np;
+ int rc;
+
+ /* Find host bridges */
+ for_each_compatible_node(np, "pciex", PCIE_COMPATIBLE) {
+ rc = wsp_setup_one_phb(np);
+ if (rc)
+ pr_err("Failed to setup PCIe bridge %s, rc=%d\n",
+ np->full_name, rc);
+ }
+
+ /* Establish device-tree linkage */
+ pci_devs_phb_init();
+
+ /* Set DMA ops to use TCEs */
+ if (iommu_is_off) {
+ pr_info("PCI-E: Disabled TCEs, using direct DMA\n");
+ set_pci_dma_ops(&dma_direct_ops);
+ } else {
+ ppc_md.pci_dma_dev_setup = wsp_pci_dma_dev_setup;
+ ppc_md.tce_build = tce_build_wsp;
+ ppc_md.tce_free = tce_free_wsp;
+ set_pci_dma_ops(&dma_iommu_ops);
+ }
+}
+
+#define err_debug(fmt...) pr_debug(fmt)
+//#define err_debug(fmt...)
+
+static int __init wsp_pci_get_err_irq_no_dt(struct device_node *np)
+{
+ const u32 *prop;
+ int hw_irq;
+
+ /* Ok, no interrupts property, let's try to find our child P2P */
+ np = of_get_next_child(np, NULL);
+ if (np == NULL)
+ return 0;
+
+ /* Grab it's interrupt map */
+ prop = of_get_property(np, "interrupt-map", NULL);
+ if (prop == NULL)
+ return 0;
+
+ /* Grab one of the interrupts in there, keep the low 4 bits */
+ hw_irq = prop[5] & 0xf;
+
+ /* 0..4 for PHB 0 and 5..9 for PHB 1 */
+ if (hw_irq < 5)
+ hw_irq = 4;
+ else
+ hw_irq = 9;
+ hw_irq |= prop[5] & ~0xf;
+
+ err_debug("PCI: Using 0x%x as error IRQ for %s\n",
+ hw_irq, np->parent->full_name);
+ return irq_create_mapping(NULL, hw_irq);
+}
+
+static const struct {
+ u32 offset;
+ const char *name;
+} wsp_pci_regs[] = {
+#define DREG(x) { PCIE_REG_##x, #x }
+#define DUTL(x) { PCIE_UTL_##x, "UTL_" #x }
+ /* Architected registers except CONFIG_ and IODA
+ * to avoid side effects
+ */
+ DREG(DMA_CHAN_STATUS),
+ DREG(CPU_LOADSTORE_STATUS),
+ DREG(LOCK0),
+ DREG(LOCK1),
+ DREG(PHB_CONFIG),
+ DREG(IO_BASE_ADDR),
+ DREG(IO_BASE_MASK),
+ DREG(IO_START_ADDR),
+ DREG(M32A_BASE_ADDR),
+ DREG(M32A_BASE_MASK),
+ DREG(M32A_START_ADDR),
+ DREG(M32B_BASE_ADDR),
+ DREG(M32B_BASE_MASK),
+ DREG(M32B_START_ADDR),
+ DREG(M64_BASE_ADDR),
+ DREG(M64_BASE_MASK),
+ DREG(M64_START_ADDR),
+ DREG(TCE_KILL),
+ DREG(LOCK2),
+ DREG(PHB_GEN_CAP),
+ DREG(PHB_TCE_CAP),
+ DREG(PHB_IRQ_CAP),
+ DREG(PHB_EEH_CAP),
+ DREG(PAPR_ERR_INJ_CONTROL),
+ DREG(PAPR_ERR_INJ_ADDR),
+ DREG(PAPR_ERR_INJ_MASK),
+
+ /* UTL core regs */
+ DUTL(SYS_BUS_CONTROL),
+ DUTL(STATUS),
+ DUTL(SYS_BUS_AGENT_STATUS),
+ DUTL(SYS_BUS_AGENT_ERR_SEV),
+ DUTL(SYS_BUS_AGENT_IRQ_EN),
+ DUTL(SYS_BUS_BURST_SZ_CONF),
+ DUTL(REVISION_ID),
+ DUTL(OUT_POST_HDR_BUF_ALLOC),
+ DUTL(OUT_POST_DAT_BUF_ALLOC),
+ DUTL(IN_POST_HDR_BUF_ALLOC),
+ DUTL(IN_POST_DAT_BUF_ALLOC),
+ DUTL(OUT_NP_BUF_ALLOC),
+ DUTL(IN_NP_BUF_ALLOC),
+ DUTL(PCIE_TAGS_ALLOC),
+ DUTL(GBIF_READ_TAGS_ALLOC),
+
+ DUTL(PCIE_PORT_CONTROL),
+ DUTL(PCIE_PORT_STATUS),
+ DUTL(PCIE_PORT_ERROR_SEV),
+ DUTL(PCIE_PORT_IRQ_EN),
+ DUTL(RC_STATUS),
+ DUTL(RC_ERR_SEVERITY),
+ DUTL(RC_IRQ_EN),
+ DUTL(EP_STATUS),
+ DUTL(EP_ERR_SEVERITY),
+ DUTL(EP_ERR_IRQ_EN),
+ DUTL(PCI_PM_CTRL1),
+ DUTL(PCI_PM_CTRL2),
+
+ /* PCIe stack regs */
+ DREG(SYSTEM_CONFIG1),
+ DREG(SYSTEM_CONFIG2),
+ DREG(EP_SYSTEM_CONFIG),
+ DREG(EP_FLR),
+ DREG(EP_BAR_CONFIG),
+ DREG(LINK_CONFIG),
+ DREG(PM_CONFIG),
+ DREG(DLP_CONTROL),
+ DREG(DLP_STATUS),
+ DREG(ERR_REPORT_CONTROL),
+ DREG(SLOT_CONTROL1),
+ DREG(SLOT_CONTROL2),
+ DREG(UTL_CONFIG),
+ DREG(BUFFERS_CONFIG),
+ DREG(ERROR_INJECT),
+ DREG(SRIOV_CONFIG),
+ DREG(PF0_SRIOV_STATUS),
+ DREG(PF1_SRIOV_STATUS),
+ DREG(PORT_NUMBER),
+ DREG(POR_SYSTEM_CONFIG),
+
+ /* Internal logic regs */
+ DREG(PHB_VERSION),
+ DREG(RESET),
+ DREG(PHB_CONTROL),
+ DREG(PHB_TIMEOUT_CONTROL1),
+ DREG(PHB_QUIESCE_DMA),
+ DREG(PHB_DMA_READ_TAG_ACTV),
+ DREG(PHB_TCE_READ_TAG_ACTV),
+
+ /* FIR registers */
+ DREG(LEM_FIR_ACCUM),
+ DREG(LEM_FIR_AND_MASK),
+ DREG(LEM_FIR_OR_MASK),
+ DREG(LEM_ACTION0),
+ DREG(LEM_ACTION1),
+ DREG(LEM_ERROR_MASK),
+ DREG(LEM_ERROR_AND_MASK),
+ DREG(LEM_ERROR_OR_MASK),
+
+ /* Error traps registers */
+ DREG(PHB_ERR_STATUS),
+ DREG(PHB_ERR_STATUS),
+ DREG(PHB_ERR1_STATUS),
+ DREG(PHB_ERR_INJECT),
+ DREG(PHB_ERR_LEM_ENABLE),
+ DREG(PHB_ERR_IRQ_ENABLE),
+ DREG(PHB_ERR_FREEZE_ENABLE),
+ DREG(PHB_ERR_SIDE_ENABLE),
+ DREG(PHB_ERR_LOG_0),
+ DREG(PHB_ERR_LOG_1),
+ DREG(PHB_ERR_STATUS_MASK),
+ DREG(PHB_ERR1_STATUS_MASK),
+ DREG(MMIO_ERR_STATUS),
+ DREG(MMIO_ERR1_STATUS),
+ DREG(MMIO_ERR_INJECT),
+ DREG(MMIO_ERR_LEM_ENABLE),
+ DREG(MMIO_ERR_IRQ_ENABLE),
+ DREG(MMIO_ERR_FREEZE_ENABLE),
+ DREG(MMIO_ERR_SIDE_ENABLE),
+ DREG(MMIO_ERR_LOG_0),
+ DREG(MMIO_ERR_LOG_1),
+ DREG(MMIO_ERR_STATUS_MASK),
+ DREG(MMIO_ERR1_STATUS_MASK),
+ DREG(DMA_ERR_STATUS),
+ DREG(DMA_ERR1_STATUS),
+ DREG(DMA_ERR_INJECT),
+ DREG(DMA_ERR_LEM_ENABLE),
+ DREG(DMA_ERR_IRQ_ENABLE),
+ DREG(DMA_ERR_FREEZE_ENABLE),
+ DREG(DMA_ERR_SIDE_ENABLE),
+ DREG(DMA_ERR_LOG_0),
+ DREG(DMA_ERR_LOG_1),
+ DREG(DMA_ERR_STATUS_MASK),
+ DREG(DMA_ERR1_STATUS_MASK),
+
+ /* Debug and Trace registers */
+ DREG(PHB_DEBUG_CONTROL0),
+ DREG(PHB_DEBUG_STATUS0),
+ DREG(PHB_DEBUG_CONTROL1),
+ DREG(PHB_DEBUG_STATUS1),
+ DREG(PHB_DEBUG_CONTROL2),
+ DREG(PHB_DEBUG_STATUS2),
+ DREG(PHB_DEBUG_CONTROL3),
+ DREG(PHB_DEBUG_STATUS3),
+ DREG(PHB_DEBUG_CONTROL4),
+ DREG(PHB_DEBUG_STATUS4),
+ DREG(PHB_DEBUG_CONTROL5),
+ DREG(PHB_DEBUG_STATUS5),
+
+ /* Don't seem to exist ...
+ DREG(PHB_DEBUG_CONTROL6),
+ DREG(PHB_DEBUG_STATUS6),
+ */
+};
+
+static int wsp_pci_regs_show(struct seq_file *m, void *private)
+{
+ struct wsp_phb *phb = m->private;
+ struct pci_controller *hose = phb->hose;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+ /* Skip write-only regs */
+ if (wsp_pci_regs[i].offset == 0xc08 ||
+ wsp_pci_regs[i].offset == 0xc10 ||
+ wsp_pci_regs[i].offset == 0xc38 ||
+ wsp_pci_regs[i].offset == 0xc40)
+ continue;
+ seq_printf(m, "0x%03x: 0x%016llx %s\n",
+ wsp_pci_regs[i].offset,
+ in_be64(hose->cfg_data + wsp_pci_regs[i].offset),
+ wsp_pci_regs[i].name);
+ }
+ return 0;
+}
+
+static int wsp_pci_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, wsp_pci_regs_show, inode->i_private);
+}
+
+static const struct file_operations wsp_pci_regs_fops = {
+ .open = wsp_pci_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int wsp_pci_reg_set(void *data, u64 val)
+{
+ out_be64((void __iomem *)data, val);
+ return 0;
+}
+
+static int wsp_pci_reg_get(void *data, u64 *val)
+{
+ *val = in_be64((void __iomem *)data);
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(wsp_pci_reg_fops, wsp_pci_reg_get, wsp_pci_reg_set, "0x%llx\n");
+
+static irqreturn_t wsp_pci_err_irq(int irq, void *dev_id)
+{
+ struct wsp_phb *phb = dev_id;
+ struct pci_controller *hose = phb->hose;
+ irqreturn_t handled = IRQ_NONE;
+ struct wsp_pcie_err_log_data ed;
+
+ pr_err("PCI: Error interrupt on %s (PHB %d)\n",
+ hose->dn->full_name, hose->global_number);
+ again:
+ memset(&ed, 0, sizeof(ed));
+
+ /* Read and clear UTL errors */
+ ed.utl_sys_err = in_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS);
+ if (ed.utl_sys_err)
+ out_be64(hose->cfg_data + PCIE_UTL_SYS_BUS_AGENT_STATUS, ed.utl_sys_err);
+ ed.utl_port_err = in_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS);
+ if (ed.utl_port_err)
+ out_be64(hose->cfg_data + PCIE_UTL_PCIE_PORT_STATUS, ed.utl_port_err);
+ ed.utl_rc_err = in_be64(hose->cfg_data + PCIE_UTL_RC_STATUS);
+ if (ed.utl_rc_err)
+ out_be64(hose->cfg_data + PCIE_UTL_RC_STATUS, ed.utl_rc_err);
+
+ /* Read and clear main trap errors */
+ ed.phb_err = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS);
+ if (ed.phb_err) {
+ ed.phb_err1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS);
+ ed.phb_log0 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_0);
+ ed.phb_log1 = in_be64(hose->cfg_data + PCIE_REG_PHB_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_STATUS, 0);
+ }
+ ed.mmio_err = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS);
+ if (ed.mmio_err) {
+ ed.mmio_err1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS);
+ ed.mmio_log0 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_0);
+ ed.mmio_log1 = in_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_STATUS, 0);
+ }
+ ed.dma_err = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS);
+ if (ed.dma_err) {
+ ed.dma_err1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS);
+ ed.dma_log0 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_0);
+ ed.dma_log1 = in_be64(hose->cfg_data + PCIE_REG_DMA_ERR_LOG_1);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR1_STATUS, 0);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_STATUS, 0);
+ }
+
+ /* Now print things out */
+ if (ed.phb_err) {
+ pr_err(" PHB Error Status : 0x%016llx\n", ed.phb_err);
+ pr_err(" PHB First Error Status: 0x%016llx\n", ed.phb_err1);
+ pr_err(" PHB Error Log 0 : 0x%016llx\n", ed.phb_log0);
+ pr_err(" PHB Error Log 1 : 0x%016llx\n", ed.phb_log1);
+ }
+ if (ed.mmio_err) {
+ pr_err(" MMIO Error Status : 0x%016llx\n", ed.mmio_err);
+ pr_err(" MMIO First Error Status: 0x%016llx\n", ed.mmio_err1);
+ pr_err(" MMIO Error Log 0 : 0x%016llx\n", ed.mmio_log0);
+ pr_err(" MMIO Error Log 1 : 0x%016llx\n", ed.mmio_log1);
+ }
+ if (ed.dma_err) {
+ pr_err(" DMA Error Status : 0x%016llx\n", ed.dma_err);
+ pr_err(" DMA First Error Status: 0x%016llx\n", ed.dma_err1);
+ pr_err(" DMA Error Log 0 : 0x%016llx\n", ed.dma_log0);
+ pr_err(" DMA Error Log 1 : 0x%016llx\n", ed.dma_log1);
+ }
+ if (ed.utl_sys_err)
+ pr_err(" UTL Sys Error Status : 0x%016llx\n", ed.utl_sys_err);
+ if (ed.utl_port_err)
+ pr_err(" UTL Port Error Status : 0x%016llx\n", ed.utl_port_err);
+ if (ed.utl_rc_err)
+ pr_err(" UTL RC Error Status : 0x%016llx\n", ed.utl_rc_err);
+
+ /* Interrupts are caused by the error traps. If we had any error there
+ * we loop again in case the UTL buffered some new stuff between
+ * going there and going to the traps
+ */
+ if (ed.dma_err || ed.mmio_err || ed.phb_err) {
+ handled = IRQ_HANDLED;
+ goto again;
+ }
+ return handled;
+}
+
+static void __init wsp_setup_pci_err_reporting(struct wsp_phb *phb)
+{
+ struct pci_controller *hose = phb->hose;
+ int err_irq, i, rc;
+ char fname[16];
+
+ /* Create a debugfs file for that PHB */
+ sprintf(fname, "phb%d", phb->hose->global_number);
+ phb->ddir = debugfs_create_dir(fname, powerpc_debugfs_root);
+
+ /* Some useful debug output */
+ if (phb->ddir) {
+ struct dentry *d = debugfs_create_dir("regs", phb->ddir);
+ char tmp[64];
+
+ for (i = 0; i < ARRAY_SIZE(wsp_pci_regs); i++) {
+ sprintf(tmp, "%03x_%s", wsp_pci_regs[i].offset,
+ wsp_pci_regs[i].name);
+ debugfs_create_file(tmp, 0600, d,
+ hose->cfg_data + wsp_pci_regs[i].offset,
+ &wsp_pci_reg_fops);
+ }
+ debugfs_create_file("all_regs", 0600, phb->ddir, phb, &wsp_pci_regs_fops);
+ }
+
+ /* Find the IRQ number for that PHB */
+ err_irq = irq_of_parse_and_map(hose->dn, 0);
+ if (err_irq == 0)
+ /* XXX Error IRQ lacking from device-tree */
+ err_irq = wsp_pci_get_err_irq_no_dt(hose->dn);
+ if (err_irq == 0) {
+ pr_err("PCI: Failed to fetch error interrupt for %s\n",
+ hose->dn->full_name);
+ return;
+ }
+ /* Request it */
+ rc = request_irq(err_irq, wsp_pci_err_irq, 0, "wsp_pci error", phb);
+ if (rc) {
+ pr_err("PCI: Failed to request interrupt for %s\n",
+ hose->dn->full_name);
+ }
+ /* Enable interrupts for all errors for now */
+ out_be64(hose->cfg_data + PCIE_REG_PHB_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+ out_be64(hose->cfg_data + PCIE_REG_MMIO_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+ out_be64(hose->cfg_data + PCIE_REG_DMA_ERR_IRQ_ENABLE, 0xffffffffffffffffull);
+}
+
+/*
+ * This is called later to hookup with the error interrupt
+ */
+static int __init wsp_setup_pci_late(void)
+{
+ struct wsp_phb *phb;
+
+ list_for_each_entry(phb, &wsp_phbs, all)
+ wsp_setup_pci_err_reporting(phb);
+
+ return 0;
+}
+arch_initcall(wsp_setup_pci_late);