3 files changed, 153 insertions, 0 deletions

diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 5efe8c96d37f..2f0d1b032a89 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -44,6 +44,8 @@
 #include <asm/siginfo.h>
 #include <mm/mmu_decl.h>
 
+#include "icswx.h"
+
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs)
 {
@@ -143,6 +145,21 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address,
 	is_write = error_code & ESR_DST;
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
 
+#ifdef CONFIG_PPC_ICSWX
+	/*
+	 * we need to do this early because this "data storage
+	 * interrupt" does not update the DAR/DEAR so we don't want to
+	 * look at it
+	 */
+	if (error_code & ICSWX_DSI_UCT) {
+		int ret;
+
+		ret = acop_handle_fault(regs, address, error_code);
+		if (ret)
+			return ret;
+	}
+#endif
+
 	if (notify_page_fault(regs))
 		return 0;
 
diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c
index a98850fd7777..5d9a59eaad93 100644
--- a/arch/powerpc/mm/icswx.c
+++ b/arch/powerpc/mm/icswx.c
@@ -17,6 +17,8 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/module.h>
+#include <linux/uaccess.h>
+
 #include "icswx.h"
 
 /*
@@ -158,3 +160,114 @@ void drop_cop(unsigned long acop, struct mm_struct *mm)
 	spin_unlock(&mm->page_table_lock);
 }
 EXPORT_SYMBOL_GPL(drop_cop);
+
+static int acop_use_cop(int ct)
+{
+	/* todo */
+	return -1;
+}
+
+/*
+ * Get the instruction word at the NIP
+ */
+static u32 acop_get_inst(struct pt_regs *regs)
+{
+	u32 inst;
+	u32 __user *p;
+
+	p = (u32 __user *)regs->nip;
+	if (!access_ok(VERIFY_READ, p, sizeof(*p)))
+		return 0;
+
+	if (__get_user(inst, p))
+		return 0;
+
+	return inst;
+}
+
+/**
+ * @regs: regsiters at time of interrupt
+ * @address: storage address
+ * @error_code: Fault code, usually the DSISR or ESR depending on
+ *		processor type
+ *
+ * Return 0 if we are able to resolve the data storage fault that
+ * results from a CT miss in the ACOP register.
+ */
+int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+		      unsigned long error_code)
+{
+	int ct;
+	u32 inst = 0;
+
+	if (!cpu_has_feature(CPU_FTR_ICSWX)) {
+		pr_info("No coprocessors available");
+		_exception(SIGILL, regs, ILL_ILLOPN, address);
+	}
+
+	if (!user_mode(regs)) {
+		/* this could happen if the HV denies the
+		 * kernel access, for now we just die */
+		die("ICSWX from kernel failed", regs, SIGSEGV);
+	}
+
+	/* Some implementations leave us a hint for the CT */
+	ct = ICSWX_GET_CT_HINT(error_code);
+	if (ct < 0) {
+		/* we have to peek at the instruction word to figure out CT */
+		u32 ccw;
+		u32 rs;
+
+		inst = acop_get_inst(regs);
+		if (inst == 0)
+			return -1;
+
+		rs = (inst >> (31 - 10)) & 0x1f;
+		ccw = regs->gpr[rs];
+		ct = (ccw >> 16) & 0x3f;
+	}
+
+	if (!acop_use_cop(ct))
+		return 0;
+
+	/* at this point the CT is unknown to the system */
+	pr_warn("%s[%d]: Coprocessor %d is unavailable",
+		current->comm, current->pid, ct);
+
+	/* get inst if we don't already have it */
+	if (inst == 0) {
+		inst = acop_get_inst(regs);
+		if (inst == 0)
+			return -1;
+	}
+
+	/* Check if the instruction is the "record form" */
+	if (inst & 1) {
+		/*
+		 * the instruction is "record" form so we can reject
+		 * using CR0
+		 */
+		regs->ccr &= ~(0xful << 28);
+		regs->ccr |= ICSWX_RC_NOT_FOUND << 28;
+
+		/* Move on to the next instruction */
+		regs->nip += 4;
+	} else {
+		/*
+		 * There is no architected mechanism to report a bad
+		 * CT so we could either SIGILL or report nothing.
+		 * Since the non-record version should only bu used
+		 * for "hints" or "don't care" we should probably do
+		 * nothing.  However, I could see how some people
+		 * might want an SIGILL so it here if you want it.
+		 */
+#ifdef CONFIG_PPC_ICSWX_USE_SIGILL
+		_exception(SIGILL, regs, ILL_ILLOPN, address);
+#else
+		regs->nip += 4;
+#endif
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(acop_handle_fault);
diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h
index 07514e49498e..42176bd0884c 100644
--- a/arch/powerpc/mm/icswx.h
+++ b/arch/powerpc/mm/icswx.h
@@ -36,4 +36,27 @@ extern void free_cop_pid(int free_pid);
 #define free_cop_pid(p)
 #endif
 
+/*
+ * These are implementation bits for architected registers.  If this
+ * ever becomes architecture the should be moved to reg.h et. al.
+ */
+/* UCT is the same bit for Server and Embedded */
+#define ICSWX_DSI_UCT		0x00004000  /* Unavailable Coprocessor Type */
+
+#ifdef CONFIG_PPC_BOOK3E
+/* Embedded implementation gives us no hints as to what the CT is */
+#define ICSWX_GET_CT_HINT(x) (-1)
+#else
+/* Server implementation contains the CT value in the DSISR */
+#define ICSWX_DSISR_CTMASK	0x00003f00
+#define ICSWX_GET_CT_HINT(x)	(((x) & ICSWX_DSISR_CTMASK) >> 8)
+#endif
+
+#define ICSWX_RC_STARTED	0x8	/* The request has been started */
+#define ICSWX_RC_NOT_IDLE	0x4	/* No coprocessor found idle */
+#define ICSWX_RC_NOT_FOUND	0x2	/* No coprocessor found */
+#define ICSWX_RC_UNDEFINED	0x1	/* Reserved */
+
+extern int acop_handle_fault(struct pt_regs *regs, unsigned long address,
+			     unsigned long error_code);
 #endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */