diff options
Diffstat (limited to 'arch/powerpc/kernel/head_fsl_booke.S')
| -rw-r--r-- | arch/powerpc/kernel/head_fsl_booke.S | 107 |
1 files changed, 91 insertions, 16 deletions
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 590304c24dad..11b549acc034 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -92,6 +92,7 @@ _ENTRY(_start); * if needed */ +_ENTRY(__early_start) /* 1. Find the index of the entry we're executing in */ bl invstr /* Find our address */ invstr: mflr r6 /* Make it accessible */ @@ -235,36 +236,40 @@ skpinv: addi r6,r6,1 /* Increment */ tlbivax 0,r9 TLBSYNC +/* The mapping only needs to be cache-coherent on SMP */ +#ifdef CONFIG_SMP +#define M_IF_SMP MAS2_M +#else +#define M_IF_SMP 0 +#endif + /* 6. Setup KERNELBASE mapping in TLB1[0] */ lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ mtspr SPRN_MAS0,r6 lis r6,(MAS1_VALID|MAS1_IPROT)@h ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l mtspr SPRN_MAS1,r6 - li r7,0 - lis r6,PAGE_OFFSET@h - ori r6,r6,PAGE_OFFSET@l - rlwimi r6,r7,0,20,31 + lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h + ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l mtspr SPRN_MAS2,r6 mtspr SPRN_MAS3,r8 tlbwe /* 7. Jump to KERNELBASE mapping */ - lis r6,KERNELBASE@h - ori r6,r6,KERNELBASE@l - rlwimi r6,r7,0,20,31 + lis r6,(KERNELBASE & ~0xfff)@h + ori r6,r6,(KERNELBASE & ~0xfff)@l lis r7,MSR_KERNEL@h ori r7,r7,MSR_KERNEL@l bl 1f /* Find our address */ 1: mflr r9 rlwimi r6,r9,0,20,31 - addi r6,r6,24 + addi r6,r6,(2f - 1b) mtspr SPRN_SRR0,r6 mtspr SPRN_SRR1,r7 rfi /* start execution out of TLB1[0] entry */ /* 8. Clear out the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ +2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ mtspr SPRN_MAS0,r7 tlbre @@ -344,6 +349,15 @@ skpinv: addi r6,r6,1 /* Increment */ mtspr SPRN_DBSR,r2 #endif +#ifdef CONFIG_SMP + /* Check to see if we're the second processor, and jump + * to the secondary_start code if so + */ + mfspr r24,SPRN_PIR + cmpwi r24,0 + bne __secondary_start +#endif + /* * This is where the main kernel code starts. */ @@ -685,12 +699,13 @@ interrupt_base: /* SPE Floating Point Data */ #ifdef CONFIG_SPE EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE); -#else - EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_SPE */ /* SPE Floating Point Round */ + EXCEPTION(0x2050, SPEFloatingPointRound, SPEFloatingPointRoundException, EXC_XFER_EE) +#else + EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE) EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE) +#endif /* CONFIG_SPE */ /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) @@ -735,6 +750,9 @@ finish_tlb_load: #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif +#ifdef CONFIG_SMP + ori r12, r12, MAS2_M +#endif mtspr SPRN_MAS2, r12 li r10, (_PAGE_HWEXEC | _PAGE_PRESENT) @@ -746,15 +764,15 @@ finish_tlb_load: iseleq r12, r12, r10 #ifdef CONFIG_PTE_64BIT -2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ + rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ mtspr SPRN_MAS3, r12 -BEGIN_FTR_SECTION +BEGIN_MMU_FTR_SECTION srwi r10, r13, 8 /* grab RPN[8:31] */ mtspr SPRN_MAS7, r10 -END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS) +END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) #else -2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ + rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ mtspr SPRN_MAS3, r11 #endif #ifdef CONFIG_E200 @@ -1037,6 +1055,63 @@ _GLOBAL(flush_dcache_L1) blr +#ifdef CONFIG_SMP +/* When we get here, r24 needs to hold the CPU # */ + .globl __secondary_start +__secondary_start: + lis r3,__secondary_hold_acknowledge@h + ori r3,r3,__secondary_hold_acknowledge@l + stw r24,0(r3) + + li r3,0 + mr r4,r24 /* Why? */ + bl call_setup_cpu + + lis r3,tlbcam_index@ha + lwz r3,tlbcam_index@l(r3) + mtctr r3 + li r26,0 /* r26 safe? */ + + /* Load each CAM entry */ +1: mr r3,r26 + bl loadcam_entry + addi r26,r26,1 + bdnz 1b + + /* get current_thread_info and current */ + lis r1,secondary_ti@ha + lwz r1,secondary_ti@l(r1) + lwz r2,TI_TASK(r1) + + /* stack */ + addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD + li r0,0 + stw r0,0(r1) + + /* ptr to current thread */ + addi r4,r2,THREAD /* address of our thread_struct */ + mtspr SPRN_SPRG3,r4 + + /* Setup the defaults for TLB entries */ + li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l + mtspr SPRN_MAS4,r4 + + /* Jump to start_secondary */ + lis r4,MSR_KERNEL@h + ori r4,r4,MSR_KERNEL@l + lis r3,start_secondary@h + ori r3,r3,start_secondary@l + mtspr SPRN_SRR0,r3 + mtspr SPRN_SRR1,r4 + sync + rfi + sync + + .globl __secondary_hold_acknowledge +__secondary_hold_acknowledge: + .long -1 +#endif + /* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. |