summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/mpc8568mds.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8568mds.dts')
-rw-r--r--arch/powerpc/boot/dts/mpc8568mds.dts160
1 files changed, 90 insertions, 70 deletions
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index b1dcfbe8c1f8..54394372b12a 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -34,7 +34,6 @@
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
- 32-bit;
};
};
@@ -51,10 +50,9 @@
soc8568@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
- #interrupt-cells = <2>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>;
+ reg = <e0000000 00001000>;
bus-frequency = <0>;
memory-controller@2000 {
@@ -74,15 +72,24 @@
};
i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
interrupt-parent = <&mpic>;
dfsrr;
+
+ rtc@68 {
+ compatible = "dallas,ds1374";
+ reg = <68>;
+ };
};
i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3100 100>;
@@ -97,10 +104,10 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- phy0: ethernet-phy@0 {
+ phy0: ethernet-phy@7 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <0>;
+ reg = <7>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
@@ -176,60 +183,6 @@
fsl,has-rstcr;
};
- pci@8000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
- /* IDSEL 0x12 AD18 */
- 9000 0 0 1 &mpic 5 1
- 9000 0 0 2 &mpic 6 1
- 9000 0 0 3 &mpic 7 1
- 9000 0 0 4 &mpic 4 1
-
- /* IDSEL 0x13 AD19 */
- 9800 0 0 1 &mpic 6 1
- 9800 0 0 2 &mpic 7 1
- 9800 0 0 3 &mpic 4 1
- 9800 0 0 4 &mpic 5 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 20000000
- 01000000 0 00000000 e2000000 0 00800000>;
- clock-frequency = <3f940aa>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <8000 1000>;
- compatible = "fsl,mpc8540-pci";
- device_type = "pci";
- };
-
- /* PCI Express */
- pcie@a000 {
- interrupt-map-mask = <f800 0 0 7>;
- interrupt-map = <
-
- /* IDSEL 0x0 (PEX) */
- 00000 0 0 1 &mpic 0 1
- 00000 0 0 2 &mpic 1 1
- 00000 0 0 3 &mpic 2 1
- 00000 0 0 4 &mpic 3 1>;
-
- interrupt-parent = <&mpic>;
- interrupts = <1a 2>;
- bus-range = <0 ff>;
- ranges = <02000000 0 a0000000 a0000000 0 20000000
- 01000000 0 00000000 e3000000 0 08000000>;
- clock-frequency = <1fca055>;
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <a000 1000>;
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- };
-
serial@4600 {
device_type = "serial";
compatible = "ns16550";
@@ -258,11 +211,11 @@
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 40000>;
- built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
big-endian;
};
+
par_io@e0100 {
reg = <e0100 100>;
device_type = "par_io";
@@ -289,12 +242,13 @@
4 1a 2 0 2 0 /* RxD7 */
4 0b 1 0 2 0 /* TX_EN */
4 18 1 0 2 0 /* TX_ER */
- 4 0f 2 0 2 0 /* RX_DV */
+ 4 10 2 0 2 0 /* RX_DV */
4 1e 2 0 2 0 /* RX_ER */
4 11 2 0 2 0 /* RX_CLK */
4 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0>; /* GTX125 */
};
+
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
@@ -380,10 +334,10 @@
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock = <0>;
- tx-clock = <19>;
- phy-handle = <&qe_phy0>;
- phy-connection-type = "gmii";
+ tx-clock = <20>;
pio-handle = <&pio1>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
};
ucc@3000 {
@@ -402,10 +356,10 @@
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock = <0>;
- tx-clock = <14>;
- phy-handle = <&qe_phy1>;
- phy-connection-type = "gmii";
+ tx-clock = <20>;
pio-handle = <&pio2>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
};
mdio@2120 {
@@ -417,10 +371,10 @@
/* These are the same PHYs as on
* gianfar's MDIO bus */
- qe_phy0: ethernet-phy@00 {
+ qe_phy0: ethernet-phy@07 {
interrupt-parent = <&mpic>;
interrupts = <1 1>;
- reg = <0>;
+ reg = <7>;
device_type = "ethernet-phy";
};
qe_phy1: ethernet-phy@01 {
@@ -449,11 +403,77 @@
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
- built-in;
big-endian;
interrupts = <2e 2 2e 2>; //high:30 low:30
interrupt-parent = <&mpic>;
};
};
+
+ pci@e0008000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x12 AD18 */
+ 9000 0 0 1 &mpic 5 1
+ 9000 0 0 2 &mpic 6 1
+ 9000 0 0 3 &mpic 7 1
+ 9000 0 0 4 &mpic 4 1
+
+ /* IDSEL 0x13 AD19 */
+ 9800 0 0 1 &mpic 6 1
+ 9800 0 0 2 &mpic 7 1
+ 9800 0 0 3 &mpic 4 1
+ 9800 0 0 4 &mpic 5 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e2000000 0 00800000>;
+ clock-frequency = <3f940aa>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e0008000 1000>;
+ compatible = "fsl,mpc8540-pci";
+ device_type = "pci";
+ };
+
+ /* PCI Express */
+ pcie@e000a000 {
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <
+
+ /* IDSEL 0x0 (PEX) */
+ 00000 0 0 1 &mpic 0 1
+ 00000 0 0 2 &mpic 1 1
+ 00000 0 0 3 &mpic 2 1
+ 00000 0 0 4 &mpic 3 1>;
+
+ interrupt-parent = <&mpic>;
+ interrupts = <1a 2>;
+ bus-range = <0 ff>;
+ ranges = <02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 e2800000 0 00800000>;
+ clock-frequency = <1fca055>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <e000a000 1000>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <02000000 0 a0000000
+ 02000000 0 a0000000
+ 0 10000000
+
+ 01000000 0 00000000
+ 01000000 0 00000000
+ 0 00800000>;
+ };
+ };
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 08:19:05 +0000