diff options
Diffstat (limited to 'arch/powerpc/boot/dts/fsl')
167 files changed, 20073 insertions, 36 deletions
diff --git a/arch/powerpc/boot/dts/fsl/b4420qds.dts b/arch/powerpc/boot/dts/fsl/b4420qds.dts new file mode 100644 index 000000000000..cd9203ceedc0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420qds.dts @@ -0,0 +1,50 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/include/ "b4420si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4420QDS"; + compatible = "fsl,B4420QDS"; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis"; + }; + }; + +}; + +/include/ "b4420si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi index 1ea8602e4345..f996cced45e0 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -89,7 +89,9 @@ compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0"; }; - L2: l2-cache-controller@c20000 { + L2_1: l2-cache-controller@c20000 { compatible = "fsl,b4420-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi index 338af7e39dd9..bc3bf9333dde 100644 --- a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -1,7 +1,7 @@ /* * B4420 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -54,8 +54,13 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; - }; + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + }; cpus { #address-cells = <1>; @@ -65,14 +70,14 @@ device_type = "cpu"; reg = <0 1>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860qds.dts b/arch/powerpc/boot/dts/fsl/b4860qds.dts new file mode 100644 index 000000000000..ba8c9bea33ac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860qds.dts @@ -0,0 +1,61 @@ +/* + * B4860DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "b4860si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4860QDS"; + compatible = "fsl,B4860QDS"; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + +}; + +/include/ "b4860si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi index 9ba904be39ee..868719821106 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -1,7 +1,7 @@ /* * B4860 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -51,14 +51,12 @@ #address-cells = <2>; #size-cells = <2>; cell-index = <1>; - fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; - fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -260,7 +258,27 @@ compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0"; }; - L2: l2-cache-controller@c20000 { +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + }; + + L2_1: l2-cache-controller@c20000 { compatible = "fsl,b4860-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi index 1948f73fd26b..8797ce146512 100644 --- a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -1,7 +1,7 @@ /* * B4860 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -54,6 +54,16 @@ dma0 = &dma0; dma1 = &dma1; sdhc = &sdhc; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; }; @@ -65,28 +75,28 @@ device_type = "cpu"; reg = <0 1>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu1: PowerPC,e6500@2 { device_type = "cpu"; reg = <2 3>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu2: PowerPC,e6500@4 { device_type = "cpu"; reg = <4 5>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; cpu3: PowerPC,e6500@6 { device_type = "cpu"; reg = <6 7>; clocks = <&mux0>; - next-level-cache = <&L2>; + next-level-cache = <&L2_1>; fsl,portid-mapping = <0x80000000>; }; }; diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi new file mode 100644 index 000000000000..64557742fb99 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi @@ -0,0 +1,232 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/ { + model = "fsl,B4QDS"; + compatible = "fsl,B4QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@c00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01052000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + sdhc@114000 { + /*Disabled as there is no sdhc connector on B4420QDS board*/ + status = "disabled"; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "at24,24c64"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + eeprom@57 { + compatible = "at24,24c256"; + reg = <0x57>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + usb@210000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + +}; + +/include/ "b4si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 603910ac1db0..74866ac52f39 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -1,7 +1,7 @@ /* * B4420 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * Copyright 2012 - 2015 Freescale Semiconductor, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -466,9 +466,32 @@ interrupts = <16 2 1 29>; }; - L2: l2-cache-controller@c20000 { - compatible = "fsl,b4-l2-cache-controller"; - reg = <0xc20000 0x1000>; - next-level-cache = <&cpc>; +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + interrupts = <96 2 0 0>, <16 2 1 30>; + + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts new file mode 100644 index 000000000000..26366e6ff657 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts @@ -0,0 +1,34 @@ +/* + * BSC9131 RDB Device Tree Source + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "bsc9131si-pre.dtsi" + +/ { + model = "fsl,bsc9131rdb"; + compatible = "fsl,bsc9131rdb"; + + memory { + device_type = "memory"; + }; + + board_ifc: ifc: ifc@ff71e000 { + /* NAND Flash on board */ + ranges = <0x0 0x0 0x0 0xff800000 0x00004000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + board_soc: soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9131rdb.dtsi" +/include/ "bsc9131si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi new file mode 100644 index 000000000000..f4d96d277ed5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dtsi @@ -0,0 +1,104 @@ +/* + * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x0 0x0 0x4000>; + + }; +}; + +&board_soc { + /* BSC9131RDB does not have any device on i2c@3100 */ + i2c@3100 { + status = "disabled"; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + + sdhc@2e000 { + status = "disabled"; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts new file mode 100644 index 000000000000..70882ade606d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts @@ -0,0 +1,35 @@ +/* + * BSC9132 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "bsc9132si-pre.dtsi" + +/ { + model = "fsl,bsc9132qds"; + compatible = "fsl,bsc9132qds"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@ff71e000 { + /* NOR, NAND Flash on board */ + ranges = <0x0 0x0 0x0 0x88000000 0x08000000 + 0x1 0x0 0x0 0xff800000 0x00010000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9132qds.dtsi" +/include/ "bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi new file mode 100644 index 000000000000..7a13bf2aa439 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dtsi @@ -0,0 +1,113 @@ +/* + * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x4000>; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <30000000>; + }; + }; + + i2c@3000 { + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x1f>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xcccccccd>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts new file mode 100644 index 000000000000..53ab4db9e79c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -0,0 +1,224 @@ +/* + * C293 PCIE Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "c293si-pre.dtsi" + +/ { + model = "fsl,C293PCIE"; + compatible = "fsl,C293PCIE"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@fffe1e000 { + reg = <0xf 0xffe1e000 0 0x2000>; + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x2 0x0 0xf 0xffdf0000 0x00010000>; + + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 1MB for DTB Image */ + reg = <0x0 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@100000 { + /* 8 MB for Linux Kernel Image */ + reg = <0x00100000 0x00800000>; + label = "NOR Linux Kernel Image"; + }; + + partition@900000 { + /* 53MB for rootfs */ + reg = <0x00900000 0x03500000>; + label = "NOR Rootfs Image"; + }; + + partition@3e00000 { + /* 1MB for blob encrypted key */ + reg = <0x03e00000 0x00100000>; + label = "NOR blob encrypted key"; + }; + + partition@3f00000 { + /* 512KB for u-boot Bootloader Image and evn */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 16MB for Linux Kernel Image */ + reg = <0x00200000 0x01000000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1200000 { + /* 4078MB for Root file System Image */ + reg = <0x00600000 0xfee00000>; + label = "NAND RFS Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,c293pcie-cpld"; + reg = <0x2 0x0 0x20>; + }; +}; + +&soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c1024"; + reg = <0x50>; + }; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 10.5MB for RFS Image */ + reg = <0x00580000 0x00a80000>; + label = "SPI Flash RFS Image"; + }; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; +/include/ "c293si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts new file mode 100644 index 000000000000..c6033909db60 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/cyrus_p5020.dts @@ -0,0 +1,155 @@ +/* + * Cyrus 5020 Device Tree Source, based on p5020ds.dts + * + * Copyright 2015 Andy Fleming + * + * p5020ds.dts copyright: + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p5020si-pre.dtsi" + +/ { + model = "varisys,CYRUS"; + compatible = "varisys,CYRUS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + }; + + i2c@118100 { + }; + + i2c@119100 { + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/ge_imp3a.dts b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts new file mode 100644 index 000000000000..a2bb47f4edbe --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/ge_imp3a.dts @@ -0,0 +1,255 @@ +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + wdt@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + wdt@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/kmcoge4.dts b/arch/powerpc/boot/dts/fsl/kmcoge4.dts new file mode 100644 index 000000000000..6858ec9ef295 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/kmcoge4.dts @@ -0,0 +1,179 @@ +/* + * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS + * + * (C) Copyright 2014 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p2041si-pre.dtsi" + +/ { + model = "keymile,kmcoge4"; + compatible = "keymile,kmcoge4", "keymile,kmp204x"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl256s1"; + reg = <0>; + spi-max-frequency = <20000000>; /* input clock */ + }; + + network_clock@1 { + compatible = "zarlink,zl30343"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p32"; + reg = <2>; + spi-max-frequency = <15000000>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + + sata@221000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + status = "disabled"; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */ + 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */ + 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */ + 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */ + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0 0 0x40000>; + }; + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts new file mode 100644 index 000000000000..96cdce841205 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dts @@ -0,0 +1,109 @@ +/* + * MPC8536 DS Device Tree Source + * + * Copyright 2008, 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + pci0: pci@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x98000000 + 0x02000000 0 0x98000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x90000000 + 0x02000000 0 0x90000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe0b000 { + reg = <0 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi new file mode 100644 index 000000000000..937ad7e46119 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds.dtsi @@ -0,0 +1,244 @@ +/* + * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,mpc8536ds-fpga-pixis"; + reg = <0x3 0x0 0x8000>; + }; +}; + +&board_soc { + i2c@3100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 0x1 0 0>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 0x1 0 0>; + reg = <1>; + }; + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + usb@2b000 { + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts new file mode 100644 index 000000000000..38d326ce92d8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536ds_36b.dts @@ -0,0 +1,109 @@ +/* + * MPC8536DS Device Tree Source (36-bit address map) + * + * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pci@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@fffe0b000 { + reg = <0xf 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index c8b2daa40ac8..41935709ebe8 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -172,7 +172,7 @@ /* mark compat w/8572 to get some erratum treatment */ gpio-controller@f000 { - compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + compatible = "fsl,mpc8572-gpio"; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts new file mode 100644 index 000000000000..e6d0b166d68d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts @@ -0,0 +1,359 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + model = "MPC8540ADS"; + compatible = "MPC8540ADS", "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8540-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <41 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x03 */ + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x04 */ + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x05 */ + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x0c */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x0d */ + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x0e */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x0f */ + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x14 */ + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8541cds.dts b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts new file mode 100644 index 000000000000..9fa2c734a988 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8541cds.dts @@ -0,0 +1,379 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + model = "MPC8541CDS"; + compatible = "MPC8541CDS", "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8541-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8541-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8541-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dts b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts new file mode 100644 index 000000000000..5a6e46861ab5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dts @@ -0,0 +1,107 @@ +/* + * MPC8544 DS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8544si-pre.dtsi" + +/ { + model = "MPC8544DS"; + compatible = "MPC8544DS", "MPC85xxDS"; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff800000 0x800000>; + }; + + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + }; + + pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 J16 Slot 2 */ + + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; + }; + + pci1: pcie@e0009000 { + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi new file mode 100644 index 000000000000..47d986b041f6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544ds.dtsi @@ -0,0 +1,207 @@ +/* + * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "dtb-nor"; + }; + + partition@20000 { + reg = <0x20000 0x30000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x200000>; + label = "dink-nor"; + read-only; + }; + + partition@400000 { + reg = <0x400000 0x380000>; + label = "kernel-nor"; + }; + + partition@780000 { + reg = <0x780000 0x80000>; + label = "u-boot-nor"; + read-only; + }; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci3 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi new file mode 100644 index 000000000000..3bc7d4711220 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds.dtsi @@ -0,0 +1,302 @@ +/* + * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x0b00000>; + label = "ramdisk-nor"; + }; + + partition@300000 { + reg = <0x0b00000 0x0400000>; + label = "kernel-nor"; + }; + + partition@700000 { + reg = <0x0f00000 0x060000>; + label = "dtb-nor"; + }; + + partition@760000 { + reg = <0x0f60000 0x020000>; + label = "env-nor"; + read-only; + }; + + partition@780000 { + reg = <0x0f80000 0x080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + board-control@1,0 { + compatible = "fsl,mpc8548cds-fpga"; + reg = <0x1 0x0 0x1000>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + i2c@3100 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0xC (Tsi310 bridge) */ + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x14 (Slot 2) */ + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x15 (Slot 3) */ + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x16 (Slot 4) */ + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x18 (Slot 5) */ + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + + pci_bridge@1c { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x04 (VIA chip) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x05 (8139) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x06 (Slot 6) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDESL 0x07 (Slot 7) */ + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; + + reg = <0xe000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <0 1 0 0>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts new file mode 100644 index 000000000000..e4620bb192f4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_32b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (32-bit address map) + * + * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@e000a000 { + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@e00c0000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts new file mode 100644 index 000000000000..bca7c09d3edf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548cds_36b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xff000000 0x01000000 + 0x1 0x0 0xf 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@fe0008000 { + reg = <0xf 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@fe0009000 { + reg = <0xf 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@fe000a000 { + reg = <0xf 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8555cds.dts b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts new file mode 100644 index 000000000000..272f08caea92 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8555cds.dts @@ -0,0 +1,379 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + model = "MPC8555CDS"; + compatible = "MPC8555CDS", "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts new file mode 100644 index 000000000000..7a822b08aa35 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts @@ -0,0 +1,392 @@ +/* + * MPC8560 ADS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + model = "MPC8560ADS"; + compatible = "MPC8560ADS", "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <82500000>; + bus-frequency = <330000000>; + clock-frequency = <825000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + soc8560@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <330000000>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; + interrupt-parent = <&cpmpic>; + }; + + serial1: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + + enet2: ethernet@91320 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x16200300>; + interrupts = <33 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; + }; + + enet3: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x3 */ + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x4 */ + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x5 */ + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 12 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 13 */ + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 14*/ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 15 */ + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 18 */ + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 19 */ + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 20 */ + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 21 */ + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568mds.dts b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts new file mode 100644 index 000000000000..01706a339603 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568mds.dts @@ -0,0 +1,314 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8568si-pre.dtsi" + +/ { + model = "MPC8568EMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; + + aliases { + pci0 = &pci0; + pci1 = &pci1; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + ranges = <0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0xf8000000 0x00008000 + 0x2 0x0 0xf0000000 0x04000000 + 0x4 0x0 0xf8008000 0x00008000 + 0x5 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr5: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8568mds-bcsr-gpio"; + reg = <0x5 0x1>; + gpio-controller; + }; + }; + + pib@4,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc8568@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + }; + + mdio@24520 { + phy0: ethernet-phy@7 { + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x00000040>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + par_io@e0100 { + num-ports = <7>; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + mode = "cpu"; + }; + + spi@500 { + mode = "cpu"; + }; + + enet2: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + qe_phy0: ethernet-phy@07 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + }; + + pci0: pci@e0008000 { + reg = <0x0 0xe0008000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 + + /* IDSEL 0x13 AD19 */ + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; + reg = <0x0 0xe000a000 0x0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + gpios = <&bcsr5 1 0>; + }; + + amber { + gpios = <&bcsr5 2 0>; + }; + + red { + gpios = <&bcsr5 3 0>; + }; + }; +}; + +/include/ "mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8569mds.dts b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts new file mode 100644 index 000000000000..a95ff7d2392c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569mds.dts @@ -0,0 +1,447 @@ +/* + * MPC8569E MDS Device Tree Source + * + * Copyright (C) 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8569si-pre.dtsi" + +/ { + model = "MPC8569EMDS"; + compatible = "fsl,MPC8569EMDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet5 = &enet5; + ethernet7 = &enet7; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf0000000 0x04000000 + 0x3 0x0 0x0 0xfc000000 0x00008000 + 0x4 0x0 0x0 0xf8008000 0x00008000 + 0x5 0x0 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; + }; + + nand@3,0 { + compatible = "fsl,mpc8569-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0 0x8000>; + }; + + pib@4,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + sdhc@2e000 { + status = "disabled"; + sdhci,1-bit-only; + bus-width = <1>; + }; + + par_io@e0100 { + num-ports = <7>; + + qe_pio_e: gpio-controller@80 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x80 0x18>; + gpio-controller; + }; + + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */ + 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */ + 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */ + 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */ + 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */ + 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */ + 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */ + 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */ + 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */ + 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */ + 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */ + 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */ + 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */ + 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */ + 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */ + 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */ + 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */ + 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */ + 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */ + 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */ + 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */ + 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */ + 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */ + 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */ + 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */ + 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */ + 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */ + 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */ + 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */ + 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */ + 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */ + 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */ + 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */ + 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */ + 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + gpios = <&qe_pio_e 30 0>; + mode = "cpu-qe"; + + serial-flash@0 { + compatible = "stm,m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + }; + + spi@500 { + mode = "cpu"; + }; + + usb@6c0 { + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio1>; + tbi-handle = <&tbi1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + qe_phy0: ethernet-phy@07 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x3>; + }; + qe_phy5: ethernet-phy@04 { + reg = <0x04>; + }; + qe_phy7: ethernet-phy@06 { + reg = <0x6>; + }; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + mdio@3520 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3520 0x18>; + compatible = "fsl,ucc-mdio"; + + tbi6: tbi-phy@15 { + reg = <0x15>; + device_type = "tbi-phy"; + }; + }; + mdio@3720 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3720 0x38>; + compatible = "fsl,ucc-mdio"; + tbi8: tbi-phy@17 { + reg = <0x17>; + device_type = "tbi-phy"; + }; + }; + + enet2: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio3>; + tbi-handle = <&tbi3>; + phy-handle = <&qe_phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio2>; + tbi-handle = <&tbi2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio4>; + tbi-handle = <&tbi4>; + phy-handle = <&qe_phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi4: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet5: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi6>; + phy-handle = <&qe_phy5>; + phy-connection-type = "sgmii"; + }; + + enet7: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi8>; + phy-handle = <&qe_phy7>; + phy-connection-type = "sgmii"; + }; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + port2 { + status = "disabled"; + }; + }; +}; + +/include/ "mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts new file mode 100644 index 000000000000..8ee5b24cc59e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dts @@ -0,0 +1,90 @@ +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi new file mode 100644 index 000000000000..357490bb84da --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds.dtsi @@ -0,0 +1,428 @@ +/* + * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00060000>; + label = "dtb-nor"; + }; + + partition@7f60000 { + reg = <0x07f60000 0x00020000>; + label = "env-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <0x3>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <7 1 0 0>; + reg = <0x1e>; + }; + sgmii_phy3: sgmii-phy@3 { + interrupts = <7 1 0 0>; + reg = <0x1f>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts new file mode 100644 index 000000000000..5c48b464669b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_36b.dts @@ -0,0 +1,90 @@ +/* + * MPC8572DS Device Tree Source (36-bit address map) + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000 + 0x4 0x0 0xf 0xffa40000 0x00040000 + 0x5 0x0 0xf 0xffa80000 0x00040000 + 0x6 0x0 0xf 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts new file mode 100644 index 000000000000..ef9ef56b3eeb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core0.dts @@ -0,0 +1,82 @@ +/* + * MPC8572 DS Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0, + * eth1, crypto, pci0, pci1. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + }; + PowerPC,8572@1 { + status = "disabled"; + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + serial@4600 { + status = "disabled"; + }; + dma@c300 { + status = "disabled"; + }; + gpio-controller@f000 { + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + ethernet@26000 { + status = "disabled"; + }; + mdio@26520 { + status = "disabled"; + }; + ethernet@27000 { + status = "disabled"; + }; + mdio@27520 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 31 32 33 37 38 39 /* enet2 enet3 */ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ + 0xe4 0xe5 0xe6 0xe7 /* msi */ + >; + }; + + msi@41600 { + msi-available-ranges = <0 0x80>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0>; + }; + timer@42100 { + status = "disabled"; + }; + }; + pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts new file mode 100644 index 000000000000..24564ee108e5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572ds_camp_core1.dts @@ -0,0 +1,115 @@ +/* + * MPC8572 DS Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + status = "disabled"; + }; + PowerPC,8572@1 { + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + ecm@1000 { + status = "disabled"; + }; + memory-controller@2000 { + status = "disabled"; + }; + memory-controller@6000 { + status = "disabled"; + }; + i2c@3000 { + status = "disabled"; + }; + i2c@3100 { + status = "disabled"; + }; + serial@4500 { + status = "disabled"; + }; + gpio-controller@f000 { + status = "disabled"; + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + dma@21300 { + status = "disabled"; + }; + ethernet@24000 { + status = "disabled"; + }; + ptp_clock@24e00 { + status = "disabled"; + }; + ethernet@25000 { + status = "disabled"; + }; + mdio@25520 { + status = "disabled"; + }; + crypto@30000 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ + 29 30 34 35 36 40 /* enet0 enet1 */ + 24 25 20 21 22 23 /* pci0 pci1 dma1 */ + 43 /* i2c */ + 0x1 0x2 0x3 0x4 /* pci slot */ + 0x9 0xa 0xb 0xc /* usb */ + 0x6 0x7 0xe 0x5 /* Audio elgacy SATA */ + 0xe0 0xe1 0xe2 0xe3 /* msi */ + >; + }; + timer@41100 { + status = "disabled"; + }; + msi@41600 { + msi-available-ranges = <0x80 0x80>; + interrupts = < + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + global-utilities@e0000 { + status = "disabled"; + }; + }; + pcie@ffe08000 { + status = "disabled"; + }; + pcie@ffe09000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi index d44e25a48734..49294cf36b4e 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -162,7 +162,7 @@ /include/ "pq3-dma-1.dtsi" /include/ "pq3-gpio-0.dtsi" gpio-controller@f000 { - compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + compatible = "fsl,mpc8572-gpio"; }; L2: l2-cache-controller@20000 { diff --git a/arch/powerpc/boot/dts/fsl/mvme2500.dts b/arch/powerpc/boot/dts/fsl/mvme2500.dts new file mode 100644 index 000000000000..c7bc1a0c7194 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mvme2500.dts @@ -0,0 +1,280 @@ +/* + * Device tree source for the Emerson/Artesyn MVME2500 + * + * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "MVME2500"; + compatible = "artesyn,MVME2500"; + + aliases { + serial2 = &serial2; + serial3 = &serial3; + serial4 = &serial4; + serial5 = &serial5; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + + i2c@3000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <8 1 0 0>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + }; + + spi0: spi@7000 { + fsl,espi-num-chipselects = <2>; + + flash@0 { + compatible = "atmel,at25df641"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + flash@1 { + compatible = "atmel,at25df641"; + reg = <1>; + spi-max-frequency = <10000000>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy1: ethernet-phy@1 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + compatible = "brcm,bcm54616S"; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + + phy7: ethernet-phy@7 { + compatible = "brcm,bcm54616S"; + interrupts = <7 1 0 0>; + reg = <0x7>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy7>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfff00000 0x00080000 + 0x1 0x0 0x0 0xffc40000 0x00010000 + 0x2 0x0 0x0 0xffc50000 0x00010000 + 0x3 0x0 0x0 0xffc60000 0x00010000 + 0x4 0x0 0x0 0xffc70000 0x00010000 + 0x6 0x0 0x0 0xffc80000 0x00010000 + 0x5 0x0 0x0 0xffdf0000 0x00008000>; + + serial2: serial@1,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x1 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <11 2 0 0>; + }; + + serial3: serial@2,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x2 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <1 2 0 0>; + }; + + serial4: serial@3,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x3 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <2 2 0 0>; + }; + + serial5: serial@4,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <3 2 0 0>; + }; + + mram@0,0 { + compatible = "everspin,mram", "mtd-ram"; + reg = <0x0 0x0 0x80000>; + bank-width = <2>; + }; + + board-control@5,0 { + compatible = "artesyn,mvme2500-fpga"; + reg = <0x5 0x0 0x01000>; + }; + + cpld@6,0 { + compatible = "artesyn,mvme2500-cpld"; + reg = <0x6 0x0 0x10000>; + interrupts = <9 1 0 0>; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" + +/ { + soc@ffe00000 { + serial@4600 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + non-removable; + }; + + }; + +}; diff --git a/arch/powerpc/boot/dts/fsl/oca4080.dts b/arch/powerpc/boot/dts/fsl/oca4080.dts new file mode 100644 index 000000000000..17bc6f391248 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/oca4080.dts @@ -0,0 +1,145 @@ +/* + * OCA4080 Device Tree Source + * + * Copyright 2014 Prodrive Technologies B.V. + * + * Based on: + * P4080DS Device Tree Source + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p4080si-pre.dtsi" + +/ { + model = "fsl,OCA4080"; + compatible = "fsl,OCA4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + i2c@118000 { + status = "disabled"; + }; + + i2c@118100 { + status = "disabled"; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xef800000 0x800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + status = "disabled"; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + status = "disabled"; + }; +}; + +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts new file mode 100644 index 000000000000..e4ab53c4ab50 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dts @@ -0,0 +1,23 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi new file mode 100644 index 000000000000..434fb2d58575 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts new file mode 100644 index 000000000000..03bd76ca8406 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pa_36b.dts @@ -0,0 +1,46 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts new file mode 100644 index 000000000000..37681fda4b7d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts @@ -0,0 +1,35 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts new file mode 100644 index 000000000000..4cf255fedc96 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts @@ -0,0 +1,58 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi new file mode 100644 index 000000000000..0f0ced69835a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -0,0 +1,217 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + ifc_nand: nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + i2c@3100 { + eeprom@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + tbi-phy@3 { + device_type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi new file mode 100644 index 000000000000..fdc19aab2f70 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi new file mode 100644 index 000000000000..de2fceed4f79 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi new file mode 100644 index 000000000000..a24699cfea9c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc.dtsi @@ -0,0 +1,151 @@ +/* + * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts new file mode 100644 index 000000000000..b29d1fcb5e6b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts new file mode 100644 index 000000000000..678d0eec24e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020mbg-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi new file mode 100644 index 000000000000..c952cd37cf6d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts new file mode 100644 index 000000000000..8175bf6f3e9c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts new file mode 100644 index 000000000000..01c305795163 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts new file mode 100644 index 000000000000..f411515937ec --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,64 @@ +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts new file mode 100644 index 000000000000..a91335ad82c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,142 @@ +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts new file mode 100644 index 000000000000..740553c090a3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb-pd.dts @@ -0,0 +1,292 @@ +/* + * P1020 RDB-PD Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PD"; + compatible = "fsl,P1020RDB-PD"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR, NAND flash, L2 switch and CPLD */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffa00000 0x00020000 + 0x3 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 122MB for File System Image */ + reg = <0x00600000 0x07a00000>; + label = "NAND File System Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,p1020rdb-pd-cpld"; + reg = <0x2 0x0 0x20000>; + }; + + L2switch@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x3 0x0 0x20000>; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + /* input clock */ + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 11MB for FS System Image */ + reg = <0x00500000 0x00b00000>; + label = "SPI File System Image"; + }; + }; + + slic@0 { + compatible = "zarlink,le88266"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + slic@1 { + compatible = "zarlink,le88266"; + reg = <2>; + spi-max-frequency = <8000000>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dts b/arch/powerpc/boot/dts/fsl/p1020rdb.dts new file mode 100644 index 000000000000..81362252bc8c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi new file mode 100644 index 000000000000..1fb7e0e0940f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb.dtsi @@ -0,0 +1,246 @@ +/* + * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + read-only; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + read-only; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + read-only; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + /* USB2 is shared with localbus. It is used + only in case of SPI and SD boot after + appropriate device-tree fixup done by uboot */ + usb@23000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts new file mode 100644 index 000000000000..74471e3ca136 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020rdb_36b.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source (36-bit address map) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi new file mode 100644 index 000000000000..7ea85eabcc5c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc.dtsi @@ -0,0 +1,140 @@ +/* + * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 256KB for DTB Image */ + reg = <0x0 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@40000 { + /* 3.75 MB for Linux Kernel Image */ + reg = <0x00040000 0x003c0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 27MB for Root file System */ + reg = <0x00400000 0x01b00000>; + label = "NOR Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts new file mode 100644 index 000000000000..bc03ef611f98 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0x0 0xec000000 0x02000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts new file mode 100644 index 000000000000..32766f6a475e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020utm-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0xf 0xec000000 0x02000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021mds.dts b/arch/powerpc/boot/dts/fsl/p1021mds.dts new file mode 100644 index 000000000000..27fdfd7dc7c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021mds.dts @@ -0,0 +1,323 @@ +/* + * P1021 MDS Device Tree Source + * + * Copyright 2010,2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021"; + compatible = "fsl,P1021MDS"; + + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NAND Flash, BCSR, PMC0/1*/ + ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf8010000 0x00020000 + 0x3 0x0 0x0 0xf8020000 0x00020000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x0 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 5MB for Compressed Root file System Image */ + reg = <0x00600000 0x00500000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@b00000 { + /* 6MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00600000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 14MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00e00000>; + label = "NAND (RW) Writable User area"; + }; + + partition@1f00000 { + /* 1MB for microcode */ + reg = <0x01f00000 0x00100000>; + label = "NAND (RO) QE Ucode"; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + }; + + pib@2,0 { + compatible = "fsl,p1021mds-pib"; + reg = <2 0 0x10000>; + }; + + pib@3,0 { + compatible = "fsl,p1021mds-pib"; + reg = <3 0 0x10000>; + }; + }; + + soc: soc@ffe00000 { + compatible = "fsl,p1021-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + spi@7000 { + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <1 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy4: ethernet-phy@4 { + reg = <0x4>; + }; + tbi-phy@5 { + device_type = "tbi-phy"; + reg = <0x5>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy4>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x0>; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi new file mode 100644 index 000000000000..e8a0f95fb24a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc.dtsi @@ -0,0 +1,256 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 10.75MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00ac0000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x00ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0x80000016>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <199999999>; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts new file mode 100644 index 000000000000..d2b4710357ac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts new file mode 100644 index 000000000000..e298c29e5606 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022ds.dtsi b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi new file mode 100644 index 000000000000..149da0f123ee --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds.dtsi @@ -0,0 +1,239 @@ +/* + * P1022 DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 0 0 0>; + }; +}; + +&board_soc { + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc01ebd3d>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <266499999>; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts new file mode 100644 index 000000000000..5a7eaceb9e8e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds_32b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + reg = <0x0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts new file mode 100644 index 000000000000..88063cd9e20a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022ds_36b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 36-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xff800000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + reg = <0xf 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + reg = <0xf 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + reg = <0xf 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022rdk.dts b/arch/powerpc/boot/dts/fsl/p1022rdk.dts new file mode 100644 index 000000000000..04c16337268a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022rdk.dts @@ -0,0 +1,188 @@ +/* + * P1022 RDK 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1022si-pre.dtsi" +/ { + model = "fsl,P1022RDK"; + compatible = "fsl,P1022RDK"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + /* The P1022 RDK does not have any localbus devices */ + status = "disabled"; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3100 { + wm8960:codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; + adt7461@4c{ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + zl6100@21{ + compatible = "isil,zl6100"; + reg = <0x21>; + }; + zl6100@24{ + compatible = "isil,zl6100"; + reg = <0x24>; + }; + zl6100@26{ + compatible = "isil,zl6100"; + reg = <0x26>; + }; + zl6100@29{ + compatible = "isil,zl6100"; + reg = <0x29>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <1000000>; + partition@0 { + label = "full-spi-flash"; + reg = <0x00000000 0x00100000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8960>; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 426bf4103b9e..5f51b7bfc064 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -224,10 +224,12 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { + fsl,wake-on-filer; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { + fsl,wake-on-filer; }; global-utilities@e0000 { diff --git a/arch/powerpc/boot/dts/fsl/p1023rdb.dts b/arch/powerpc/boot/dts/fsl/p1023rdb.dts new file mode 100644 index 000000000000..9716ca64651c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023rdb.dts @@ -0,0 +1,260 @@ +/* + * P1023 RDB Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Author: Chunhe Lan <Chunhe.Lan@freescale.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1023si-pre.dtsi" + +/ { + model = "fsl,P1023"; + compatible = "fsl,P1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + qportals: qman-portals@ff000000 { + ranges = <0x0 0xf 0xff000000 0x200000>; + }; + + bportals: bman-portals@ff200000 { + ranges = <0x0 0xf 0xff200000 0x200000>; + }; + + soc: soc@ff600000 { + ranges = <0x0 0x0 0xff600000 0x200000>; + + i2c@3000 { + eeprom@53 { + compatible = "at24,24c04"; + reg = <0x53>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + lbc: localbus@ff605000 { + reg = <0 0xff605000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 48MB for Root File System */ + reg = <0x00000000 0x03000000>; + label = "NOR Root File System"; + }; + + partition@3000000 { + /* 1MB for DTB Image */ + reg = <0x03000000 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@3100000 { + /* 14MB for Linux Kernel Image */ + reg = <0x03100000 0x00e00000>; + label = "NOR Linux Kernel Image"; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 14MB for Linux Kernel Image */ + reg = <0x00200000 0x00e00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1000000 { + /* 96MB for Root File System Image */ + reg = <0x01000000 0x06000000>; + label = "NAND Root File System"; + }; + + partition@7000000 { + /* 16MB for User Writable Area */ + reg = <0x07000000 0x01000000>; + label = "NAND Writable User area"; + }; + }; + }; + + pci0: pcie@ff60a000 { + reg = <0 0xff60a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + board_pci1: pci1: pcie@ff609000 { + reg = <0 0xff609000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ff60b000 { + reg = <0 0xff60b000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi new file mode 100644 index 000000000000..b05dcb40f800 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb.dtsi @@ -0,0 +1,228 @@ +/* + * P1024 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Writable Area */ + reg = <0x01900000 0x00700000>; + label = "NAND Writable User area"; + }; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts new file mode 100644 index 000000000000..8b09b9d56ad1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_32b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 32Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts new file mode 100644 index 000000000000..e7093aef28f1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1024rdb_36b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 36Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi new file mode 100644 index 000000000000..f50256482297 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb.dtsi @@ -0,0 +1,326 @@ +/* + * P1025 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1025-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts new file mode 100644 index 000000000000..b15acbaea34b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_32b.dts @@ -0,0 +1,133 @@ +/* + * P1025 RDB Device Tree Source (32-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x6>; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts new file mode 100644 index 000000000000..b0ded5e8bd0b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025rdb_36b.dts @@ -0,0 +1,93 @@ +/* + * P1025 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + status = "disabled"; /* no firmware loaded */ + }; + +}; + +/include/ "p1025rdb.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dts b/arch/powerpc/boot/dts/fsl/p1025twr.dts new file mode 100644 index 000000000000..9b8863b74b60 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1025twr.dtsi b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi new file mode 100644 index 000000000000..08816fb474f5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1025twr.dtsi @@ -0,0 +1,292 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@b0e00 { + compatible = "fsl,etsec-ptp"; + reg = <0xb0e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xc0000021>; + fsl,tmr-fiper1 = <999999990>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <133333332>; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dts b/arch/powerpc/boot/dts/fsl/p2020ds.dts new file mode 100644 index 000000000000..5ba06f753bc5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dts @@ -0,0 +1,89 @@ +/* + * P2020 DS Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020DS"; + compatible = "fsl,P2020DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + reg = <0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe08000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci1: pci1: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci0: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "p2020si-post.dtsi" +/include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi new file mode 100644 index 000000000000..e699cf95b063 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi @@ -0,0 +1,327 @@ +/* + * P2020DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + + nand@4,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + + sgmii_phy1: sgmii-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; +}; + +&board_pci1 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + + // IDSEL 0x11 func 0 - PCI slot 1 + 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 1 - PCI slot 1 + 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 2 - PCI slot 1 + 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 3 - PCI slot 1 + 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 4 - PCI slot 1 + 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 5 - PCI slot 1 + 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 6 - PCI slot 1 + 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 7 - PCI slot 1 + 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <4 1 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi new file mode 100644 index 000000000000..ad2e242365cc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc.dtsi @@ -0,0 +1,241 @@ +/* + * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <2>; + fsl,tmr-add = <0xaaaaaaab>; + fsl,tmr-fiper1 = <999999995>; + fsl,tmr-fiper2 = <99990>; + fsl,max-adj = <299999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts new file mode 100644 index 000000000000..d3295c204bbf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts new file mode 100644 index 000000000000..9307a8f41ddb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci2: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020rdb.dts b/arch/powerpc/boot/dts/fsl/p2020rdb.dts new file mode 100644 index 000000000000..70cf09019ce5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts @@ -0,0 +1,291 @@ +/* + * P2020 RDB Device Tree Source + * + * Copyright 2009-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041rdb.dts b/arch/powerpc/boot/dts/fsl/p2041rdb.dts new file mode 100644 index 000000000000..e9bd89406c4c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041rdb.dts @@ -0,0 +1,250 @@ +/* + * P2041RDB Device Tree Source + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p2041si-pre.dtsi" + +/ { + model = "fsl,P2041RDB"; + compatible = "fsl,P2041RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118000 { + lm75b@48 { + compatible = "nxp,lm75a"; + reg = <0x48>; + }; + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + }; + + usb1: usb@211000 { + dr_mode = "host"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 1 0 0xf 0xffa00000 0x00040000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 04ad177b6a12..51e975d7631a 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -1,7 +1,7 @@ /* * P2041/P2040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -430,4 +430,31 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi index b1ea147f2995..941274c41f21 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -1,7 +1,7 @@ /* * P2041 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,14 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p3041ds.dts b/arch/powerpc/boot/dts/fsl/p3041ds.dts new file mode 100644 index 000000000000..f2b1d40334d4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041ds.dts @@ -0,0 +1,284 @@ +/* + * P3041DS Device Tree Source + * + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p3041si-pre.dtsi" + +/ { + model = "fsl,P3041DS"; + compatible = "fsl,P3041DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <35000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index 2cab18af6df2..187676fa8d83 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -1,7 +1,7 @@ /* * P3041 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -457,4 +457,31 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi index dc5f4b362c24..50b73e8e638f 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -1,7 +1,7 @@ /* * P3041 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -73,6 +73,14 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p4080ds.dts b/arch/powerpc/boot/dts/fsl/p4080ds.dts new file mode 100644 index 000000000000..28a55c5e7099 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080ds.dts @@ -0,0 +1,218 @@ +/* + * P4080DS Device Tree Source + * + * Copyright 2009 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p4080si-pre.dtsi" + +/ { + model = "fsl,P4080DS"; + compatible = "fsl,P4080DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + usb0: usb@210000 { + phy_type = "ulpi"; + }; + + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + board-control@3,0 { + compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + +}; + +/include/ "p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index dfc76bc41cb2..a0252085f858 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -1,7 +1,7 @@ /* * P4080/P4040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -513,4 +513,50 @@ crypto: crypto@300000 { /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet5: ethernet@e0000 { + }; + + enet6: ethernet@e2000 { + }; + + enet7: ethernet@e4000 { + }; + + enet8: ethernet@e6000 { + }; + + enet9: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi index 38bde0958672..d56a546b73e6 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -1,7 +1,7 @@ /* * P4080/P4040 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,19 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p5020ds.dts b/arch/powerpc/boot/dts/fsl/p5020ds.dts new file mode 100644 index 000000000000..920dc77b9c43 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020ds.dts @@ -0,0 +1,284 @@ +/* + * P5020DS Device Tree Source + * + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "p5020si-pre.dtsi" + +/ { + model = "fsl,P5020DS"; + compatible = "fsl,P5020DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index b77923ad72cf..cd008cdd2889 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -1,7 +1,7 @@ /* * P5020/5010 Silicon/SoC Device Tree Source (post include) * - * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -448,4 +448,31 @@ raideng@320000 { fsl,iommu-parent = <&pamu1>; }; + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi index 1cc61e126e4c..bfba0b4f1cbb 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -1,7 +1,7 @@ /* * P5020/P5010 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -79,6 +79,14 @@ raideng_jr1 = &raideng_jr1; raideng_jr2 = &raideng_jr2; raideng_jr3 = &raideng_jr3; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/p5040ds.dts b/arch/powerpc/boot/dts/fsl/p5040ds.dts new file mode 100644 index 000000000000..e169cc297ea3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040ds.dts @@ -0,0 +1,254 @@ +/* + * P5040DS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +/include/ "p5040si-pre.dtsi" + +/ { + model = "fsl,P5040DS"; + compatible = "fsl,P5040DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + qportals: qman-portals@ff4200000 { + ranges = <0x0 0xf 0xf4200000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x40>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "p5040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index 6d214526b81b..2f227b1345ad 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -1,7 +1,7 @@ /* * P5040 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -422,4 +422,58 @@ /include/ "qoriq-qman1.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman-0.dtsi" +/include/ "qoriq-fman-0-1g-0.dtsi" +/include/ "qoriq-fman-0-1g-1.dtsi" +/include/ "qoriq-fman-0-1g-2.dtsi" +/include/ "qoriq-fman-0-1g-3.dtsi" +/include/ "qoriq-fman-0-1g-4.dtsi" +/include/ "qoriq-fman-0-10g-0.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@f0000 { + }; + }; + +/include/ "qoriq-fman-1.dtsi" +/include/ "qoriq-fman-1-1g-0.dtsi" +/include/ "qoriq-fman-1-1g-1.dtsi" +/include/ "qoriq-fman-1-1g-2.dtsi" +/include/ "qoriq-fman-1-1g-3.dtsi" +/include/ "qoriq-fman-1-1g-4.dtsi" +/include/ "qoriq-fman-1-10g-0.dtsi" + fman@500000 { + enet6: ethernet@e0000 { + }; + + enet7: ethernet@e2000 { + }; + + enet8: ethernet@e4000 { + }; + + enet9: ethernet@e6000 { + }; + + enet10: ethernet@e8000 { + }; + + enet11: ethernet@f0000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi index b048a2be05a8..0659d5bb69b8 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -1,7 +1,7 @@ /* * P5040 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -72,6 +72,21 @@ rtic_c = &rtic_c; rtic_d = &rtic_d; sec_mon = &sec_mon; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/ppa8548.dts b/arch/powerpc/boot/dts/fsl/ppa8548.dts new file mode 100644 index 000000000000..8f9ffbe0e4f4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/ppa8548.dts @@ -0,0 +1,164 @@ +/* + * PPA8548 Device Tree Source (36-bit address map) + * Copyright 2013 Prodrive B.V. + * + * Based on: + * MPC8548 CDS Device Tree Source (36-bit address map) + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8548si-pre.dtsi" + +/ { + model = "ppa8548"; + compatible = "ppa8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x40000000>; + }; + + lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; + }; + + soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + pci0: pci@fe0008000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci1: pci@fe0009000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci2: pcie@fe000a000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x11000>; + port1 { + ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; + }; + }; +}; + +&lbc { + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x7A0000>; + label = "user"; + }; + + partition@7A0000 { + reg = <0x7A0000 0x20000>; + label = "env"; + read-only; + }; + + partition@7C0000 { + reg = <0x7C0000 0x40000>; + label = "u-boot"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@6f { + compatible = "intersil,isl1208"; + reg = <0x6f>; + }; + }; + + i2c@3100 { + }; + + /* + * Only ethernet controller @25000 and @26000 are used. + * Use alias enet2 and enet3 for the remainig controllers, + * to stay compatible with mpc8548si-pre.dtsi. + */ + enet2: ethernet@24000 { + status = "disabled"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <7 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <8 1 0 0>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy1>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + crypto@30000 { + status = "disabled"; + }; +}; + +/include/ "mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi index 4ece1edbff63..88cd70de4f86 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi @@ -32,13 +32,14 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -global-utilities@e1000 { +clockgen: global-utilities@e1000 { compatible = "fsl,qoriq-clockgen-1.0"; ranges = <0x0 0xe1000 0x1000>; reg = <0xe1000 0x1000>; clock-frequency = <0>; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <2>; sysclk: sysclk { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi index 48e0b6e4ce33..6dfd7c5357ab 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -32,12 +32,13 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -global-utilities@e1000 { +clockgen: global-utilities@e1000 { compatible = "fsl,qoriq-clockgen-2.0"; ranges = <0x0 0xe1000 0x1000>; reg = <0xe1000 0x1000>; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <2>; sysclk: sysclk { #clock-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi new file mode 100644 index 000000000000..eb77675c255a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-10g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + }; + + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi new file mode 100644 index 000000000000..b965bc219bae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-0.dtsi @@ -0,0 +1,69 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + tbi-handle = <&tbi0>; + ptp-timer = <&ptp_timer0>; + }; + + mdio0: mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + interrupts = <100 2 0 0>; + + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi new file mode 100644 index 000000000000..9eb6e6dd7cf9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + tbi-handle = <&tbi1>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi new file mode 100644 index 000000000000..092b89936743 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + tbi-handle = <&tbi2>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi2: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi new file mode 100644 index 000000000000..2df0dc876045 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + tbi-handle = <&tbi3>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi3: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi new file mode 100644 index 000000000000..5fceb2438fdc --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + tbi-handle = <&tbi4>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi4: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi new file mode 100644 index 000000000000..abd01d466de4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-0.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman0_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi new file mode 100644 index 000000000000..83ae87b69d92 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-10g-0.dtsi @@ -0,0 +1,61 @@ +/* + * QorIQ FMan 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi new file mode 100644 index 000000000000..b0f0e36a4eac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-dtsec"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e1120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe1120 0xee0>; + + tbi5: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi new file mode 100644 index 000000000000..a3a79f8552a3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-1.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-dtsec"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + tbi-handle = <&tbi6>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e3120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + + tbi6: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi new file mode 100644 index 000000000000..96a69a84b8a8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-dtsec"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + tbi-handle = <&tbi7>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e5120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe5120 0xee0>; + + tbi7: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi new file mode 100644 index 000000000000..7405d1940133 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-3.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-dtsec"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + tbi-handle = <&tbi8>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e7120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe7120 0xee0>; + + tbi8: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi new file mode 100644 index 000000000000..f49ad69e5212 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1-1g-4.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ FMan 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-dtsec"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + tbi-handle = <&tbi9>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e9120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-mdio"; + reg = <0xe9120 0xee0>; + + tbi9: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi new file mode 100644 index 000000000000..debea75fd3f0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman-1.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ FMan device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2011 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0x100000>; + reg = <0x500000 0x100000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x60 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + fman1_oh_0x1: port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + status = "disabled"; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x87000 0x1000>; + status = "disabled"; + }; + + ptp_timer1: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi new file mode 100644 index 000000000000..2e441fab6d8f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0-best-effort.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi new file mode 100644 index 000000000000..0b8f87f79d15 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-0.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x10 &fman0_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi new file mode 100644 index 000000000000..ba6f2275d3f6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1-best-effort.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + fsl,fman-10g-port; + fsl,fman-best-effort-port; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi new file mode 100644 index 000000000000..886003805592 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-1.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman0_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x11 &fman0_tx_0x31>; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi new file mode 100644 index 000000000000..ace9c13648ce --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman0_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi new file mode 100644 index 000000000000..a4fc28654b31 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-1.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman0_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi new file mode 100644 index 000000000000..78596faadf99 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-2.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman0_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0a &fman0_tx_0x2a>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi new file mode 100644 index 000000000000..af93abd86d78 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-3.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman0_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0b &fman0_tx_0x2b>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi new file mode 100644 index 000000000000..97cffd74bf3d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-4.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman0_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0c &fman0_tx_0x2c>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi new file mode 100644 index 000000000000..232c5c277bdb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-1g-5.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@400000 { + fman0_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman0_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman0_rx_0x0d &fman0_tx_0x2d>; + ptp-timer = <&ptp_timer0>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi new file mode 100644 index 000000000000..3a20e0d1a6d2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman0_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman0_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi new file mode 100644 index 000000000000..89d64ee282b0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-0.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x90000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb0000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f0000 { + cell-index = <0x8>; + compatible = "fsl,fman-memac"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi new file mode 100644 index 000000000000..7fa9260889c6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-10g-1.dtsi @@ -0,0 +1,63 @@ +/* + * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x11: port@91000 { + cell-index = <0x11>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x91000 0x1000>; + fsl,fman-10g-port; + }; + + fman1_tx_0x31: port@b1000 { + cell-index = <0x31>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xb1000 0x1000>; + fsl,fman-10g-port; + }; + + ethernet@f2000 { + cell-index = <0x9>; + compatible = "fsl,fman-memac"; + reg = <0xf2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>; + }; + + mdio@f3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xf3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi new file mode 100644 index 000000000000..3d236662bf07 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-0.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #0 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x08: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa8000 0x1000>; + }; + + ethernet@e0000 { + cell-index = <0>; + compatible = "fsl,fman-memac"; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x08 &fman1_tx_0x28>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe1000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi new file mode 100644 index 000000000000..97dc2eedd462 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-1.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #1 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x09: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xa9000 0x1000>; + }; + + ethernet@e2000 { + cell-index = <1>; + compatible = "fsl,fman-memac"; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x09 &fman1_tx_0x29>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe3000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi new file mode 100644 index 000000000000..f084dd2f0bec --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-2.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #2 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0a: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xaa000 0x1000>; + }; + + ethernet@e4000 { + cell-index = <2>; + compatible = "fsl,fman-memac"; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0a &fman1_tx_0x2a>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e5000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe5000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi new file mode 100644 index 000000000000..bb627b3bf3db --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-3.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0b: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xab000 0x1000>; + }; + + ethernet@e6000 { + cell-index = <3>; + compatible = "fsl,fman-memac"; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0b &fman1_tx_0x2b>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe7000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi new file mode 100644 index 000000000000..821ed12225d4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-4.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #4 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0c: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_tx_0x2c: port@ac000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xac000 0x1000>; + }; + + ethernet@e8000 { + cell-index = <4>; + compatible = "fsl,fman-memac"; + reg = <0xe8000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0c &fman1_tx_0x2c>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@e9000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xe9000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi new file mode 100644 index 000000000000..e245f1a1e42a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1-1g-5.dtsi @@ -0,0 +1,62 @@ +/* + * QorIQ FMan v3 1g port #5 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman@500000 { + fman1_rx_0x0d: port@8d000 { + cell-index = <0xd>; + compatible = "fsl,fman-v3-port-rx"; + reg = <0x8d000 0x1000>; + }; + + fman1_tx_0x2d: port@ad000 { + cell-index = <0x2d>; + compatible = "fsl,fman-v3-port-tx"; + reg = <0xad000 0x1000>; + }; + + ethernet@ea000 { + cell-index = <5>; + compatible = "fsl,fman-memac"; + reg = <0xea000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x0d &fman1_tx_0x2d>; + ptp-timer = <&ptp_timer1>; + }; + + mdio@eb000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xeb000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi new file mode 100644 index 000000000000..82750ac944c7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-1.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x500000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman1: fman@500000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman"; + ranges = <0 0x500000 0x100000>; + reg = <0x500000 0x100000>; + interrupts = <97 2 0 0>, <16 2 1 0>; + clocks = <&clockgen 3 1>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x820 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x60000>; + }; + + fman1_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman1_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman1_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman1_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + fman1_oh_0x6: port@86000 { + cell-index = <0x6>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman1_oh_0x7: port@87000 { + cell-index = <0x7>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x87000 0x1000>; + }; + + mdio1: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer1: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi new file mode 100644 index 000000000000..7f60b6060176 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi @@ -0,0 +1,94 @@ +/* + * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ] + * + * Copyright 2012 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +fman0: fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + compatible = "fsl,fman"; + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + interrupts = <96 2 0 0>, <16 2 1 1>; + clocks = <&clockgen 3 0>; + clock-names = "fmanclk"; + fsl,qman-channel-range = <0x800 0x10>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x30000>; + }; + + fman0_oh_0x2: port@82000 { + cell-index = <0x2>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x82000 0x1000>; + }; + + fman0_oh_0x3: port@83000 { + cell-index = <0x3>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x83000 0x1000>; + }; + + fman0_oh_0x4: port@84000 { + cell-index = <0x4>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x84000 0x1000>; + }; + + fman0_oh_0x5: port@85000 { + cell-index = <0x5>; + compatible = "fsl,fman-v3-port-oh"; + reg = <0x85000 0x1000>; + }; + + mdio0: mdio@fc000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfc000 0x1000>; + }; + + xmdio0: mdio@fd000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; + reg = <0xfd000 0x1000>; + }; + + ptp_timer0: ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1023rdb.dts b/arch/powerpc/boot/dts/fsl/t1023rdb.dts new file mode 100644 index 000000000000..2b2fff4a12a2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1023rdb.dts @@ -0,0 +1,162 @@ +/* + * T1023 RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1023RDB"; + compatible = "fsl,T1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 1 0 0xf 0xff800000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clk */ + }; + }; + + i2c@118000 { + eeprom@50 { + compatible = "st,m24256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x5 0x1 0 0>; + }; + }; + + i2c@118100 { + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + current-sensor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "t1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi index df1f068a5376..518ddaa8da2d 100644 --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi @@ -327,4 +327,23 @@ }; /include/ "qoriq-sec5.0-0.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/t1024qds.dts b/arch/powerpc/boot/dts/fsl/t1024qds.dts new file mode 100644 index 000000000000..43cd5b50cd0a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1024qds.dts @@ -0,0 +1,251 @@ +/* + * T1024 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1024QDS"; + compatible = "fsl,T1024QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; /* 16MB */ + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; /* 512KB */ + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64"; /* 8MB */ + reg = <2>; + spi-max-frequency = <10000000>; + }; + + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; + }; + + slic@3 { + compatible = "maxim,ds26522"; + reg = <3>; + spi-max-frequency = <2000000>; + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "atmel,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + /* Thermal Monitor */ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eeprom@55 { + compatible = "atmel,24c02"; + reg = <0x55>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x5 0x1 0 0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts new file mode 100644 index 000000000000..429d8c73650a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -0,0 +1,191 @@ +/* + * T1024 RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t102xsi-pre.dtsi" + +/ { + model = "fsl,T1024RDB"; + compatible = "fsl,T1024RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t1024-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + bank-width = <1>; + device-width = <1>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clk */ + }; + + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; + }; + + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; + }; + }; + + i2c@118000 { + adt7461@4c { + /* Thermal Monitor */ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + current-sensor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "t1024si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi index 1f1a9f8474d5..3e1528abf3f4 100644 --- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi @@ -59,6 +59,12 @@ sdhc = &sdhc; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts new file mode 100644 index 000000000000..681746efd31d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040d4rdb.dts @@ -0,0 +1,46 @@ +/* + * T1040D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xd4rdb.dtsi" + +/ { + model = "fsl,T1040D4RDB"; + compatible = "fsl,T1040D4RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040qds.dts b/arch/powerpc/boot/dts/fsl/t1040qds.dts new file mode 100644 index 000000000000..4d298659468c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040qds.dts @@ -0,0 +1,46 @@ +/* + * T1040QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1040QDS"; + compatible = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts new file mode 100644 index 000000000000..8f9e65b47515 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -0,0 +1,48 @@ +/* + * T1040RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1040RDB"; + compatible = "fsl,T1040RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1040rdb-cpld"; + }; + }; +}; + +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 9770d0278493..d30b3de1cfc5 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -547,4 +547,35 @@ /include/ "qoriq-sec5.0-0.dtsi" /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-fman3l-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts new file mode 100644 index 000000000000..b245b31b8279 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042d4rdb.dts @@ -0,0 +1,53 @@ +/* + * T1042D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xd4rdb.dtsi" + +/ { + model = "fsl,T1042D4RDB"; + compatible = "fsl,T1042D4RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1040d4rdb-cpld", + "fsl,deepsleep-cpld"; + }; + }; +}; + +/include/ "t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042qds.dts b/arch/powerpc/boot/dts/fsl/t1042qds.dts new file mode 100644 index 000000000000..4ab9bbe7c5c5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042qds.dts @@ -0,0 +1,46 @@ +/* + * T1042QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1042QDS"; + compatible = "fsl,T1042QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts new file mode 100644 index 000000000000..67af56bc5ee9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -0,0 +1,48 @@ +/* + * T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB"; + compatible = "fsl,T1042RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb-cpld"; + }; + }; +}; + +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts new file mode 100644 index 000000000000..2f67677530a4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -0,0 +1,57 @@ +/* + * T1042RDB_PI Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB_PI"; + compatible = "fsl,T1042RDB_PI"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb_pi-cpld"; + }; + }; + soc: soc@ffe000000 { + i2c@118000 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + }; +}; + +/include/ "t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi new file mode 100644 index 000000000000..3f6d7c6a106b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xd4rdb.dtsi @@ -0,0 +1,215 @@ +/* + * T1040D4RDB/T1042D4RDB Device Tree Source + * + * Copyright 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + compatible = "fsl,t1040d4rdb-cpld"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512ax3"; + reg = <0>; + /* input clock */ + spi-max-frequency = <10000000>; + }; + slic@1 { + compatible = "maxim,ds26522"; + reg = <1>; + spi-max-frequency = <2000000>; /* input clock */ + }; + slic@2 { + compatible = "maxim,ds26522"; + reg = <2>; + spi-max-frequency = <2000000>; /* input clock */ + }; + }; + i2c@118000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + + i2c@118100 { + mux@77 { + /* + * Child nodes of mux depend on which i2c + * devices are connected via the mini PCI + * connector slot1, the mini PCI connector + * slot2, the HDMI connector, and the PEX + * slot. Systems with such devices attached + * should provide a wrapper .dts file that + * includes this one, and adds those nodes + */ + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x0 0x0 0x10000000 + 0x01000000 0 0x0 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000 + 0x01000000 0 0 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi new file mode 100644 index 000000000000..1498d1e4aecf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi @@ -0,0 +1,193 @@ +/* + * T104xQDS Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "philips,pca9547"; + reg = <0x77>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi new file mode 100644 index 000000000000..830ea484295b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xrdb.dtsi @@ -0,0 +1,189 @@ +/* + * T1040RDB/T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi index bbb7025ca9c2..fcfa38ae5e02 100644 --- a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -1,7 +1,7 @@ /* * T1040/T1042 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2013 Freescale Semiconductor Inc. + * Copyright 2013-2014 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -58,6 +58,13 @@ sdhc = &sdhc; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; }; cpus { diff --git a/arch/powerpc/boot/dts/fsl/t2080qds.dts b/arch/powerpc/boot/dts/fsl/t2080qds.dts new file mode 100644 index 000000000000..9c8e10fe04cb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080qds.dts @@ -0,0 +1,57 @@ +/* + * T2080QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2080rdb.dts b/arch/powerpc/boot/dts/fsl/t2080rdb.dts new file mode 100644 index 000000000000..33205bf08919 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080rdb.dts @@ -0,0 +1,57 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xrdb.dtsi" + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2081qds.dts b/arch/powerpc/boot/dts/fsl/t2081qds.dts new file mode 100644 index 000000000000..b81213596dbf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2081qds.dts @@ -0,0 +1,46 @@ +/* + * T2081QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2081QDS"; + compatible = "fsl,T2081QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index 32c790ae7fde..c744569a20e1 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -630,6 +630,49 @@ /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + L2_1: l2-cache-controller@c20000 { /* Cluster 0 L2 cache */ compatible = "fsl,t2080-l2-cache-controller"; diff --git a/arch/powerpc/boot/dts/fsl/t208xqds.dtsi b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi new file mode 100644 index 000000000000..869f9159b4d1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xqds.dtsi @@ -0,0 +1,277 @@ +/* + * T2080/T2081 QDS Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; /* 16MB */ + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <1>; + spi-max-frequency = <35000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64"; + reg = <2>; + spi-max-frequency = <35000000>; + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "at24,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "at24,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "at24,24c02"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0xb 0x1 0 0>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom@55 { + compatible = "at24,24c02"; + reg = <0x55>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi new file mode 100644 index 000000000000..693d2a8fa01c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xrdb.dtsi @@ -0,0 +1,211 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t2080-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7481@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi index e71ceb0e1100..c2e57203910d 100644 --- a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi @@ -51,6 +51,17 @@ serial3 = &serial3; crypto = &crypto; + + fman0 = &fman0; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; diff --git a/arch/powerpc/boot/dts/fsl/t4240qds.dts b/arch/powerpc/boot/dts/fsl/t4240qds.dts new file mode 100644 index 000000000000..c067a6533809 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240qds.dts @@ -0,0 +1,310 @@ +/* + * T4240QDS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t4240si-pre.dtsi" + +/ { + model = "fsl,T4240QDS"; + compatible = "fsl,T4240QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@C00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@55 { + compatible = "at24,24c256"; + reg = <0x55>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + ina220@46 { + compatible = "ti,ina220"; + reg = <0x46>; + shunt-resistor = <1000>; + }; + + ina220@47 { + compatible = "ti,ina220"; + reg = <0x47>; + shunt-resistor = <1000>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t4240rdb.dts b/arch/powerpc/boot/dts/fsl/t4240rdb.dts new file mode 100644 index 000000000000..6e820a875621 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240rdb.dts @@ -0,0 +1,213 @@ +/* + * T4240RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t4240si-pre.dtsi" + +/ { + model = "fsl,T4240RDB"; + compatible = "fsl,T4240RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index d806360d0f64..68c4eadc19e3 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -1,7 +1,7 @@ /* * T4240 Silicon/SoC Device Tree Source (post include) * - * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -1068,6 +1068,92 @@ /include/ "qoriq-qman3.dtsi" /include/ "qoriq-bman1.dtsi" +/include/ "qoriq-fman3-0.dtsi" +/include/ "qoriq-fman3-0-1g-0.dtsi" +/include/ "qoriq-fman3-0-1g-1.dtsi" +/include/ "qoriq-fman3-0-1g-2.dtsi" +/include/ "qoriq-fman3-0-1g-3.dtsi" +/include/ "qoriq-fman3-0-1g-4.dtsi" +/include/ "qoriq-fman3-0-1g-5.dtsi" +/include/ "qoriq-fman3-0-10g-0.dtsi" +/include/ "qoriq-fman3-0-10g-1.dtsi" + fman@400000 { + enet0: ethernet@e0000 { + }; + + enet1: ethernet@e2000 { + }; + + enet2: ethernet@e4000 { + }; + + enet3: ethernet@e6000 { + }; + + enet4: ethernet@e8000 { + }; + + enet5: ethernet@ea000 { + }; + + enet6: ethernet@f0000 { + }; + + enet7: ethernet@f2000 { + }; + + mdio@fc000 { + status = "disabled"; + }; + + mdio@fd000 { + status = "disabled"; + }; + }; + +/include/ "qoriq-fman3-1.dtsi" +/include/ "qoriq-fman3-1-1g-0.dtsi" +/include/ "qoriq-fman3-1-1g-1.dtsi" +/include/ "qoriq-fman3-1-1g-2.dtsi" +/include/ "qoriq-fman3-1-1g-3.dtsi" +/include/ "qoriq-fman3-1-1g-4.dtsi" +/include/ "qoriq-fman3-1-1g-5.dtsi" +/include/ "qoriq-fman3-1-10g-0.dtsi" +/include/ "qoriq-fman3-1-10g-1.dtsi" + fman@500000 { + enet8: ethernet@e0000 { + }; + + enet9: ethernet@e2000 { + }; + + enet10: ethernet@e4000 { + }; + + enet11: ethernet@e6000 { + }; + + enet12: ethernet@e8000 { + }; + + enet13: ethernet@ea000 { + }; + + enet14: ethernet@f0000 { + }; + + enet15: ethernet@f2000 { + }; + + mdio@fc000 { + interrupts = <100 1 0 0>; + }; + + mdio@fd000 { + interrupts = <101 1 0 0>; + }; + }; + L2_1: l2-cache-controller@c20000 { compatible = "fsl,t4240-l2-cache-controller"; reg = <0xc20000 0x40000>; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi index 261a3abb1a55..1184a746fcb1 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -1,7 +1,7 @@ /* * T4240 Silicon/SoC Device Tree Source (pre include) * - * Copyright 2012 Freescale Semiconductor Inc. + * Copyright 2012 - 2015 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -51,6 +51,7 @@ serial2 = &serial2; serial3 = &serial3; crypto = &crypto; + pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; @@ -59,6 +60,25 @@ dma1 = &dma1; dma2 = &dma2; sdhc = &sdhc; + + fman0 = &fman0; + fman1 = &fman1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet4 = &enet4; + ethernet5 = &enet5; + ethernet6 = &enet6; + ethernet7 = &enet7; + ethernet8 = &enet8; + ethernet9 = &enet9; + ethernet10 = &enet10; + ethernet11 = &enet11; + ethernet12 = &enet12; + ethernet13 = &enet13; + ethernet14 = &enet14; + ethernet15 = &enet15; }; cpus { |