diff options
Diffstat (limited to 'arch/mn10300/Kconfig')
| -rw-r--r-- | arch/mn10300/Kconfig | 119 |
1 files changed, 86 insertions, 33 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index a0a16e6e4a4e..81e27816aaf8 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -48,7 +48,7 @@ config GENERIC_CALIBRATE_DELAY def_bool y config GENERIC_CMOS_UPDATE - def_bool y + def_bool n config GENERIC_FIND_NEXT_BIT def_bool y @@ -72,10 +72,6 @@ config GENERIC_HARDIRQS config HOTPLUG_CPU def_bool n -config HZ - int - default 1000 - mainmenu "Matsushita MN10300/AM33 Kernel Configuration" source "init/Kconfig" @@ -98,6 +94,9 @@ config MN10300_UNIT_ASB2303 config MN10300_UNIT_ASB2305 bool "ASB2305" +config MN10300_UNIT_ASB2364 + bool "ASB2364" + endchoice choice @@ -115,17 +114,13 @@ config MN10300_PROC_MN103E010 select MN10300_PROC_HAS_TTYSM1 select MN10300_PROC_HAS_TTYSM2 -endchoice - -choice - prompt "Processor core support" - default MN10300_CPU_AM33V2 - help - This option specifies the processor core for which the kernel will be - compiled. It affects the instruction set used. - -config MN10300_CPU_AM33V2 - bool "AM33v2" +config MN10300_PROC_MN2WS0050 + bool "MN2WS0050" + depends on MN10300_UNIT_ASB2364 + select AM34_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 endchoice @@ -138,7 +133,7 @@ config MN10300_HAS_ATOMIC_OPS_UNIT config FPU bool "FPU present" default y - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 config LAZY_SAVE_FPU bool "Save FPU state lazily" @@ -179,24 +174,55 @@ config KERNEL_TEXT_ADDRESS config KERNEL_ZIMAGE_BASE_ADDRESS hex "Base address of compressed vmlinux image" - default "0x90700000" + default "0x50700000" + +config BOOT_STACK_OFFSET + hex + default "0xF00" if SMP + default "0xFF0" if !SMP +config BOOT_STACK_SIZE + hex + depends on SMP + default "0x100" endmenu -config PREEMPT - bool "Preemptible Kernel" - help - This option reduces the latency of the kernel when reacting to - real-time or interactive events by allowing a low priority process to - be preempted even if it is in kernel mode executing a system call. - This allows applications to run more reliably even when the system is - under load. +config SMP + bool "Symmetric multi-processing support" + default y + depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050 + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, like most personal computers, say N. If + you have a system with more than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + singleprocessor machines. On a singleprocessor machine, the kernel + will run faster if you say N here. + + See also <file:Documentation/i386/IO-APIC.txt>, + <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. - Say Y here if you are building a kernel for a desktop, embedded - or real-time system. Say N if you are unsure. + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default "2" + +config USE_GENERIC_SMP_HELPERS + bool + depends on SMP + default y + +source "kernel/Kconfig.preempt" config MN10300_CURRENT_IN_E2 bool "Hold current task address in E2 register" + depends on !SMP default y help This option removes the E2/R2 register from the set available to gcc @@ -218,12 +244,14 @@ config MN10300_USING_JTAG suppresses the use of certain hardware debugging features, such as single-stepping, which are taken over completely by the JTAG unit. +source "kernel/Kconfig.hz" + config MN10300_RTC bool "Using MN10300 RTC" - depends on MN10300_PROC_MN103E010 + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + select GENERIC_CMOS_UPDATE default n help - This option enables support for the RTC, thus enabling time to be tracked, even when system is powered down. This is available on-chip on the MN103E010. @@ -315,14 +343,23 @@ config MN10300_TTYSM1 choice prompt "Select the timer to supply the clock for SIF1" - default MN10300_TTYSM0_TIMER9 + default MN10300_TTYSM1_TIMER12 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM1_TIMER9 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM1 +config MN10300_TTYSM1_TIMER12 + bool "Use timer 12 (16-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM1_TIMER9 bool "Use timer 9 (16-bit)" + depends on AM33_2 || AM33_3 config MN10300_TTYSM1_TIMER3 bool "Use timer 3 (8-bit)" + depends on AM33_2 || AM33_3 endchoice @@ -337,17 +374,33 @@ config MN10300_TTYSM2 choice prompt "Select the timer to supply the clock for SIF2" - default MN10300_TTYSM0_TIMER10 + default MN10300_TTYSM2_TIMER3 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM2_TIMER10 \ + if AM33_2 || AM33_3 depends on MN10300_TTYSM2 +config MN10300_TTYSM2_TIMER9 + bool "Use timer 9 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER1 + bool "Use timer 1 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER3 + bool "Use timer 3 (8-bit)" + depends on !(AM33_2 || AM33_3) + config MN10300_TTYSM2_TIMER10 bool "Use timer 10 (16-bit)" + depends on AM33_2 || AM33_3 endchoice config MN10300_TTYSM2_CTS bool "Enable the use of the CTS line /dev/ttySM2" - depends on MN10300_TTYSM2 + depends on MN10300_TTYSM2 && AM33_2 endmenu |