diff options
Diffstat (limited to 'arch/mips')
| -rw-r--r-- | arch/mips/boot/dts/Makefile | 1 | ||||
| -rw-r--r-- | arch/mips/boot/dts/ni/169445.dts | 100 | ||||
| -rw-r--r-- | arch/mips/boot/dts/ni/Makefile | 7 | ||||
| -rw-r--r-- | arch/mips/configs/generic/board-ni169445.config | 27 | ||||
| -rw-r--r-- | arch/mips/generic/Kconfig | 6 | ||||
| -rw-r--r-- | arch/mips/generic/vmlinux.its.S | 25 |
6 files changed, 166 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index b9db49203e0c..cbac26ce063e 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -5,6 +5,7 @@ dts-dirs += ingenic dts-dirs += lantiq dts-dirs += mti dts-dirs += netlogic +dts-dirs += ni dts-dirs += pic32 dts-dirs += qca dts-dirs += ralink diff --git a/arch/mips/boot/dts/ni/169445.dts b/arch/mips/boot/dts/ni/169445.dts new file mode 100644 index 000000000000..5389ef46c480 --- /dev/null +++ b/arch/mips/boot/dts/ni/169445.dts @@ -0,0 +1,100 @@ +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ni,169445"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "mti,mips14KEc"; + clocks = <&baseclk>; + reg = <0>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + baseclk: baseclock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + + cpu_intc: interrupt-controller { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + ahb@1f300000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1f300000 0x80FFF>; + + gpio1: gpio@10 { + compatible = "ni,169445-nand-gpio"; + reg = <0x10 0x4>; + reg-names = "dat"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio2: gpio@14 { + compatible = "ni,169445-nand-gpio"; + reg = <0x14 0x4>; + reg-names = "dat"; + gpio-controller; + #gpio-cells = <2>; + no-output; + }; + + nand@0 { + compatible = "gpio-control-nand"; + nand-on-flash-bbt; + nand-ecc-mode = "soft_bch"; + nand-ecc-step-size = <512>; + nand-ecc-strength = <4>; + reg = <0x0 4>; + gpios = <&gpio2 0 0>, /* rdy */ + <&gpio1 1 0>, /* nce */ + <&gpio1 2 0>, /* ale */ + <&gpio1 3 0>, /* cle */ + <&gpio1 4 0>; /* nwp */ + }; + + serial@80000 { + compatible = "ns16550a"; + reg = <0x80000 0x1000>; + interrupt-parent = <&cpu_intc>; + interrupts = <6>; + clocks = <&baseclk>; + reg-shift = <0>; + }; + + ethernet@40000 { + compatible = "snps,dwmac-4.10a"; + interrupt-parent = <&cpu_intc>; + interrupts = <5>; + interrupt-names = "macirq"; + reg = <0x40000 0x2000>; + clock-names = "stmmaceth", "pclk"; + clocks = <&baseclk>, <&baseclk>; + + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; diff --git a/arch/mips/boot/dts/ni/Makefile b/arch/mips/boot/dts/ni/Makefile new file mode 100644 index 000000000000..66cfdffc51c2 --- /dev/null +++ b/arch/mips/boot/dts/ni/Makefile @@ -0,0 +1,7 @@ +dtb-$(CONFIG_FIT_IMAGE_FDT_NI169445) += 169445.dtb + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config new file mode 100644 index 000000000000..0bae1f861a5b --- /dev/null +++ b/arch/mips/configs/generic/board-ni169445.config @@ -0,0 +1,27 @@ +CONFIG_FIT_IMAGE_FDT_NI169445=y + +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y + +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC_PLATFORM=y + +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CMDLINE_PARTS=y + +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPIO=y +CONFIG_MTD_NAND_IDS=y + +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BLOCK=y + +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +CONFIG_STMMAC_PLATFORM=y +CONFIG_DWMAC_GENERIC=y diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index 51ffbbaddee2..e0436aaf7f38 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -36,4 +36,10 @@ config FIT_IMAGE_FDT_BOSTON enable this if you wish to boot on a MIPS Boston board, as it is expected by the bootloader. +config FIT_IMAGE_FDT_NI169445 + bool "Include FDT for NI 169445" + help + Enable this to include the FDT for the 169445 platform from + National Instruments in the FIT kernel image. + endif diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S index 3390e2f80b80..0083e1af9a91 100644 --- a/arch/mips/generic/vmlinux.its.S +++ b/arch/mips/generic/vmlinux.its.S @@ -54,3 +54,28 @@ }; }; #endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */ + +#ifdef CONFIG_FIT_IMAGE_FDT_NI169445 +/ { + images { + fdt@ni169445 { + description = "NI 169445 device tree"; + data = /incbin/("boot/dts/ni/169445.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + conf@ni169445 { + description = "NI 169445 Linux Kernel"; + kernel = "kernel@0"; + fdt = "fdt@ni169445"; + }; + }; +}; +#endif /* CONFIG_FIT_IMAGE_FDT_NI169445 */ |