diff options
Diffstat (limited to 'arch/mips')
| -rw-r--r-- | arch/mips/include/asm/mips-cm.h | 311 | ||||
| -rw-r--r-- | arch/mips/kernel/mips-cm.c | 48 | ||||
| -rw-r--r-- | arch/mips/kernel/mips-cpc.c | 8 | ||||
| -rw-r--r-- | arch/mips/kernel/pm-cps.c | 4 | ||||
| -rw-r--r-- | arch/mips/kernel/smp-cps.c | 10 | ||||
| -rw-r--r-- | arch/mips/kernel/traps.c | 8 | ||||
| -rw-r--r-- | arch/mips/mm/sc-mips.c | 36 | ||||
| -rw-r--r-- | arch/mips/mti-malta/malta-dtshim.c | 2 |
8 files changed, 188 insertions, 239 deletions
diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index b01fcf4647d2..4857d4ae97b7 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -127,212 +127,161 @@ static inline bool mips_cm_has_l2sync(void) CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_CLCB_OFS + off, cl_##name) \ CPS_ACCESSOR_RW(gcr, sz, MIPS_CM_COCB_OFS + off, co_##name) -/* GCB register accessor functions */ +/* GCR_CONFIG - Information about the system */ GCR_ACCESSOR_RO(64, 0x000, config) +#define CM_GCR_CONFIG_NUMIOCU GENMASK(15, 8) +#define CM_GCR_CONFIG_PCORES GENMASK(7, 0) + +/* GCR_BASE - Base address of the Global Configuration Registers (GCRs) */ GCR_ACCESSOR_RW(64, 0x008, base) +#define CM_GCR_BASE_GCRBASE GENMASK_ULL(47, 15) +#define CM_GCR_BASE_CMDEFTGT GENMASK(1, 0) +#define CM_GCR_BASE_CMDEFTGT_DISABLED 0 +#define CM_GCR_BASE_CMDEFTGT_MEM 1 +#define CM_GCR_BASE_CMDEFTGT_IOCU0 2 +#define CM_GCR_BASE_CMDEFTGT_IOCU1 3 + +/* GCR_ACCESS - Controls core/IOCU access to GCRs */ GCR_ACCESSOR_RW(32, 0x020, access) +#define CM_GCR_ACCESS_ACCESSEN GENMASK(7, 0) + +/* GCR_REV - Indicates the Coherence Manager revision */ GCR_ACCESSOR_RO(32, 0x030, rev) +#define CM_GCR_REV_MAJOR GENMASK(15, 8) +#define CM_GCR_REV_MINOR GENMASK(7, 0) + +#define CM_ENCODE_REV(major, minor) \ + (((major) << __ffs(CM_GCR_REV_MAJOR)) | \ + ((minor) << __ffs(CM_GCR_REV_MINOR))) + +#define CM_REV_CM2 CM_ENCODE_REV(6, 0) +#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0) +#define CM_REV_CM3 CM_ENCODE_REV(8, 0) + +/* GCR_ERR_CONTROL - Control error checking logic */ GCR_ACCESSOR_RW(32, 0x038, err_control) +#define CM_GCR_ERR_CONTROL_L2_ECC_EN BIT(1) +#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT BIT(0) + +/* GCR_ERR_MASK - Control which errors are reported as interrupts */ GCR_ACCESSOR_RW(64, 0x040, error_mask) + +/* GCR_ERR_CAUSE - Indicates the type of error that occurred */ GCR_ACCESSOR_RW(64, 0x048, error_cause) +#define CM_GCR_ERROR_CAUSE_ERRTYPE GENMASK(31, 27) +#define CM3_GCR_ERROR_CAUSE_ERRTYPE GENMASK_ULL(63, 58) +#define CM_GCR_ERROR_CAUSE_ERRINFO GENMASK(26, 0) + +/* GCR_ERR_ADDR - Indicates the address associated with an error */ GCR_ACCESSOR_RW(64, 0x050, error_addr) + +/* GCR_ERR_MULT - Indicates when multiple errors have occurred */ GCR_ACCESSOR_RW(64, 0x058, error_mult) +#define CM_GCR_ERROR_MULT_ERR2ND GENMASK(4, 0) + +/* GCR_L2_ONLY_SYNC_BASE - Base address of the L2 cache-only sync region */ GCR_ACCESSOR_RW(64, 0x070, l2_only_sync_base) +#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE GENMASK(31, 12) +#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN BIT(0) + +/* GCR_GIC_BASE - Base address of the Global Interrupt Controller (GIC) */ GCR_ACCESSOR_RW(64, 0x080, gic_base) +#define CM_GCR_GIC_BASE_GICBASE GENMASK(31, 17) +#define CM_GCR_GIC_BASE_GICEN BIT(0) + +/* GCR_CPC_BASE - Base address of the Cluster Power Controller (CPC) */ GCR_ACCESSOR_RW(64, 0x088, cpc_base) +#define CM_GCR_CPC_BASE_CPCBASE GENMASK(31, 15) +#define CM_GCR_CPC_BASE_CPCEN BIT(0) + +/* GCR_REGn_BASE - Base addresses of CM address regions */ GCR_ACCESSOR_RW(64, 0x090, reg0_base) -GCR_ACCESSOR_RW(64, 0x098, reg0_mask) GCR_ACCESSOR_RW(64, 0x0a0, reg1_base) -GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask) GCR_ACCESSOR_RW(64, 0x0b0, reg2_base) -GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask) GCR_ACCESSOR_RW(64, 0x0c0, reg3_base) +#define CM_GCR_REGn_BASE_BASEADDR GENMASK(31, 16) + +/* GCR_REGn_MASK - Size & destination of CM address regions */ +GCR_ACCESSOR_RW(64, 0x098, reg0_mask) +GCR_ACCESSOR_RW(64, 0x0a8, reg1_mask) +GCR_ACCESSOR_RW(64, 0x0b8, reg2_mask) GCR_ACCESSOR_RW(64, 0x0c8, reg3_mask) +#define CM_GCR_REGn_MASK_ADDRMASK GENMASK(31, 16) +#define CM_GCR_REGn_MASK_CCAOVR GENMASK(7, 5) +#define CM_GCR_REGn_MASK_CCAOVREN BIT(4) +#define CM_GCR_REGn_MASK_DROPL2 BIT(2) +#define CM_GCR_REGn_MASK_CMTGT GENMASK(1, 0) +#define CM_GCR_REGn_MASK_CMTGT_DISABLED 0x0 +#define CM_GCR_REGn_MASK_CMTGT_MEM 0x1 +#define CM_GCR_REGn_MASK_CMTGT_IOCU0 0x2 +#define CM_GCR_REGn_MASK_CMTGT_IOCU1 0x3 + +/* GCR_GIC_STATUS - Indicates presence of a Global Interrupt Controller (GIC) */ GCR_ACCESSOR_RO(32, 0x0d0, gic_status) +#define CM_GCR_GIC_STATUS_EX BIT(0) + +/* GCR_CPC_STATUS - Indicates presence of a Cluster Power Controller (CPC) */ GCR_ACCESSOR_RO(32, 0x0f0, cpc_status) +#define CM_GCR_CPC_STATUS_EX BIT(0) + +/* GCR_L2_CONFIG - Indicates L2 cache configuration when Config5.L2C=1 */ GCR_ACCESSOR_RW(32, 0x130, l2_config) +#define CM_GCR_L2_CONFIG_BYPASS BIT(20) +#define CM_GCR_L2_CONFIG_SET_SIZE GENMASK(15, 12) +#define CM_GCR_L2_CONFIG_LINE_SIZE GENMASK(11, 8) +#define CM_GCR_L2_CONFIG_ASSOC GENMASK(7, 0) + +/* GCR_SYS_CONFIG2 - Further information about the system */ GCR_ACCESSOR_RO(32, 0x150, sys_config2) +#define CM_GCR_SYS_CONFIG2_MAXVPW GENMASK(3, 0) + +/* GCR_L2_PFT_CONTROL - Controls hardware L2 prefetching */ GCR_ACCESSOR_RW(32, 0x300, l2_pft_control) +#define CM_GCR_L2_PFT_CONTROL_PAGEMASK GENMASK(31, 12) +#define CM_GCR_L2_PFT_CONTROL_PFTEN BIT(8) +#define CM_GCR_L2_PFT_CONTROL_NPFT GENMASK(7, 0) + +/* GCR_L2_PFT_CONTROL_B - Controls hardware L2 prefetching */ GCR_ACCESSOR_RW(32, 0x308, l2_pft_control_b) +#define CM_GCR_L2_PFT_CONTROL_B_CEN BIT(8) +#define CM_GCR_L2_PFT_CONTROL_B_PORTID GENMASK(7, 0) + +/* GCR_BEV_BASE - Controls the location of the BEV for powered up cores */ GCR_ACCESSOR_RW(64, 0x680, bev_base) -/* Core Local & Core Other register accessor functions */ +/* GCR_Cx_RESET_RELEASE - Controls core reset for CM 1.x */ GCR_CX_ACCESSOR_RW(32, 0x000, reset_release) -GCR_CX_ACCESSOR_RW(32, 0x008, coherence) -GCR_CX_ACCESSOR_RO(32, 0x010, config) -GCR_CX_ACCESSOR_RW(32, 0x018, other) -GCR_CX_ACCESSOR_RW(32, 0x020, reset_base) -GCR_CX_ACCESSOR_RO(32, 0x028, id) -GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base) - -/* GCR_CONFIG register fields */ -#define CM_GCR_CONFIG_NUMIOCU_SHF 8 -#define CM_GCR_CONFIG_NUMIOCU_MSK (_ULCAST_(0xf) << 8) -#define CM_GCR_CONFIG_PCORES_SHF 0 -#define CM_GCR_CONFIG_PCORES_MSK (_ULCAST_(0xff) << 0) - -/* GCR_BASE register fields */ -#define CM_GCR_BASE_GCRBASE_SHF 15 -#define CM_GCR_BASE_GCRBASE_MSK (_ULCAST_(0x1ffff) << 15) -#define CM_GCR_BASE_CMDEFTGT_SHF 0 -#define CM_GCR_BASE_CMDEFTGT_MSK (_ULCAST_(0x3) << 0) -#define CM_GCR_BASE_CMDEFTGT_DISABLED 0 -#define CM_GCR_BASE_CMDEFTGT_MEM 1 -#define CM_GCR_BASE_CMDEFTGT_IOCU0 2 -#define CM_GCR_BASE_CMDEFTGT_IOCU1 3 -/* GCR_RESET_EXT_BASE register fields */ -#define CM_GCR_RESET_EXT_BASE_EVARESET BIT(31) -#define CM_GCR_RESET_EXT_BASE_UEB BIT(30) +/* GCR_Cx_COHERENCE - Controls core coherence */ +GCR_CX_ACCESSOR_RW(32, 0x008, coherence) +#define CM_GCR_Cx_COHERENCE_COHDOMAINEN GENMASK(7, 0) +#define CM3_GCR_Cx_COHERENCE_COHEN BIT(0) -/* GCR_ACCESS register fields */ -#define CM_GCR_ACCESS_ACCESSEN_SHF 0 -#define CM_GCR_ACCESS_ACCESSEN_MSK (_ULCAST_(0xff) << 0) +/* GCR_Cx_CONFIG - Information about a core's configuration */ +GCR_CX_ACCESSOR_RO(32, 0x010, config) +#define CM_GCR_Cx_CONFIG_IOCUTYPE GENMASK(11, 10) +#define CM_GCR_Cx_CONFIG_PVPE GENMASK(9, 0) -/* GCR_REV register fields */ -#define CM_GCR_REV_MAJOR_SHF 8 -#define CM_GCR_REV_MAJOR_MSK (_ULCAST_(0xff) << 8) -#define CM_GCR_REV_MINOR_SHF 0 -#define CM_GCR_REV_MINOR_MSK (_ULCAST_(0xff) << 0) +/* GCR_Cx_OTHER - Configure the core-other/redirect GCR block */ +GCR_CX_ACCESSOR_RW(32, 0x018, other) +#define CM_GCR_Cx_OTHER_CORENUM GENMASK(31, 16) +#define CM3_GCR_Cx_OTHER_CORE GENMASK(13, 8) +#define CM3_GCR_Cx_OTHER_VP GENMASK(2, 0) -#define CM_ENCODE_REV(major, minor) \ - (((major) << CM_GCR_REV_MAJOR_SHF) | \ - ((minor) << CM_GCR_REV_MINOR_SHF)) +/* GCR_Cx_RESET_BASE - Configure where powered up cores will fetch from */ +GCR_CX_ACCESSOR_RW(32, 0x020, reset_base) +#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE GENMASK(31, 12) -#define CM_REV_CM2 CM_ENCODE_REV(6, 0) -#define CM_REV_CM2_5 CM_ENCODE_REV(7, 0) -#define CM_REV_CM3 CM_ENCODE_REV(8, 0) +/* GCR_Cx_ID - Identify the current core */ +GCR_CX_ACCESSOR_RO(32, 0x028, id) -/* GCR_ERR_CONTROL register fields */ -#define CM_GCR_ERR_CONTROL_L2_ECC_EN_SHF 1 -#define CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK (_ULCAST_(0x1) << 1) -#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_SHF 0 -#define CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_MSK (_ULCAST_(0x1) << 0) - -/* GCR_ERROR_CAUSE register fields */ -#define CM_GCR_ERROR_CAUSE_ERRTYPE_SHF 27 -#define CM_GCR_ERROR_CAUSE_ERRTYPE_MSK (_ULCAST_(0x1f) << 27) -#define CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF 58 -#define CM3_GCR_ERROR_CAUSE_ERRTYPE_MSK GENMASK_ULL(63, 58) -#define CM_GCR_ERROR_CAUSE_ERRINFO_SHF 0 -#define CM_GCR_ERROR_CAUSE_ERRINGO_MSK (_ULCAST_(0x7ffffff) << 0) - -/* GCR_ERROR_MULT register fields */ -#define CM_GCR_ERROR_MULT_ERR2ND_SHF 0 -#define CM_GCR_ERROR_MULT_ERR2ND_MSK (_ULCAST_(0x1f) << 0) - -/* GCR_L2_ONLY_SYNC_BASE register fields */ -#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_SHF 12 -#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK (_ULCAST_(0xfffff) << 12) -#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_SHF 0 -#define CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK (_ULCAST_(0x1) << 0) - -/* GCR_GIC_BASE register fields */ -#define CM_GCR_GIC_BASE_GICBASE_SHF 17 -#define CM_GCR_GIC_BASE_GICBASE_MSK (_ULCAST_(0x7fff) << 17) -#define CM_GCR_GIC_BASE_GICEN_SHF 0 -#define CM_GCR_GIC_BASE_GICEN_MSK (_ULCAST_(0x1) << 0) - -/* GCR_CPC_BASE register fields */ -#define CM_GCR_CPC_BASE_CPCBASE_SHF 15 -#define CM_GCR_CPC_BASE_CPCBASE_MSK (_ULCAST_(0x1ffff) << 15) -#define CM_GCR_CPC_BASE_CPCEN_SHF 0 -#define CM_GCR_CPC_BASE_CPCEN_MSK (_ULCAST_(0x1) << 0) - -/* GCR_GIC_STATUS register fields */ -#define CM_GCR_GIC_STATUS_GICEX_SHF 0 -#define CM_GCR_GIC_STATUS_GICEX_MSK (_ULCAST_(0x1) << 0) - -/* GCR_REGn_BASE register fields */ -#define CM_GCR_REGn_BASE_BASEADDR_SHF 16 -#define CM_GCR_REGn_BASE_BASEADDR_MSK (_ULCAST_(0xffff) << 16) - -/* GCR_REGn_MASK register fields */ -#define CM_GCR_REGn_MASK_ADDRMASK_SHF 16 -#define CM_GCR_REGn_MASK_ADDRMASK_MSK (_ULCAST_(0xffff) << 16) -#define CM_GCR_REGn_MASK_CCAOVR_SHF 5 -#define CM_GCR_REGn_MASK_CCAOVR_MSK (_ULCAST_(0x3) << 5) -#define CM_GCR_REGn_MASK_CCAOVREN_SHF 4 -#define CM_GCR_REGn_MASK_CCAOVREN_MSK (_ULCAST_(0x1) << 4) -#define CM_GCR_REGn_MASK_DROPL2_SHF 2 -#define CM_GCR_REGn_MASK_DROPL2_MSK (_ULCAST_(0x1) << 2) -#define CM_GCR_REGn_MASK_CMTGT_SHF 0 -#define CM_GCR_REGn_MASK_CMTGT_MSK (_ULCAST_(0x3) << 0) -#define CM_GCR_REGn_MASK_CMTGT_DISABLED (_ULCAST_(0x0) << 0) -#define CM_GCR_REGn_MASK_CMTGT_MEM (_ULCAST_(0x1) << 0) -#define CM_GCR_REGn_MASK_CMTGT_IOCU0 (_ULCAST_(0x2) << 0) -#define CM_GCR_REGn_MASK_CMTGT_IOCU1 (_ULCAST_(0x3) << 0) - -/* GCR_GIC_STATUS register fields */ -#define CM_GCR_GIC_STATUS_EX_SHF 0 -#define CM_GCR_GIC_STATUS_EX_MSK (_ULCAST_(0x1) << 0) - -/* GCR_CPC_STATUS register fields */ -#define CM_GCR_CPC_STATUS_EX_SHF 0 -#define CM_GCR_CPC_STATUS_EX_MSK (_ULCAST_(0x1) << 0) - -/* GCR_L2_CONFIG register fields */ -#define CM_GCR_L2_CONFIG_BYPASS_SHF 20 -#define CM_GCR_L2_CONFIG_BYPASS_MSK (_ULCAST_(0x1) << 20) -#define CM_GCR_L2_CONFIG_SET_SIZE_SHF 12 -#define CM_GCR_L2_CONFIG_SET_SIZE_MSK (_ULCAST_(0xf) << 12) -#define CM_GCR_L2_CONFIG_LINE_SIZE_SHF 8 -#define CM_GCR_L2_CONFIG_LINE_SIZE_MSK (_ULCAST_(0xf) << 8) -#define CM_GCR_L2_CONFIG_ASSOC_SHF 0 -#define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0) - -/* GCR_SYS_CONFIG2 register fields */ -#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0 -#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0) - -/* GCR_L2_PFT_CONTROL register fields */ -#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_SHF 12 -#define CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK (_ULCAST_(0xfffff) << 12) -#define CM_GCR_L2_PFT_CONTROL_PFTEN_SHF 8 -#define CM_GCR_L2_PFT_CONTROL_PFTEN_MSK (_ULCAST_(0x1) << 8) -#define CM_GCR_L2_PFT_CONTROL_NPFT_SHF 0 -#define CM_GCR_L2_PFT_CONTROL_NPFT_MSK (_ULCAST_(0xff) << 0) - -/* GCR_L2_PFT_CONTROL_B register fields */ -#define CM_GCR_L2_PFT_CONTROL_B_CEN_SHF 8 -#define CM_GCR_L2_PFT_CONTROL_B_CEN_MSK (_ULCAST_(0x1) << 8) -#define CM_GCR_L2_PFT_CONTROL_B_PORTID_SHF 0 -#define CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK (_ULCAST_(0xff) << 0) - -/* GCR_Cx_COHERENCE register fields */ -#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0 -#define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0) -#define CM3_GCR_Cx_COHERENCE_COHEN_MSK (_ULCAST_(0x1) << 0) - -/* GCR_Cx_CONFIG register fields */ -#define CM_GCR_Cx_CONFIG_IOCUTYPE_SHF 10 -#define CM_GCR_Cx_CONFIG_IOCUTYPE_MSK (_ULCAST_(0x3) << 10) -#define CM_GCR_Cx_CONFIG_PVPE_SHF 0 -#define CM_GCR_Cx_CONFIG_PVPE_MSK (_ULCAST_(0x3ff) << 0) - -/* GCR_Cx_OTHER register fields */ -#define CM_GCR_Cx_OTHER_CORENUM_SHF 16 -#define CM_GCR_Cx_OTHER_CORENUM_MSK (_ULCAST_(0xffff) << 16) -#define CM3_GCR_Cx_OTHER_CORE_SHF 8 -#define CM3_GCR_Cx_OTHER_CORE_MSK (_ULCAST_(0x3f) << 8) -#define CM3_GCR_Cx_OTHER_VP_SHF 0 -#define CM3_GCR_Cx_OTHER_VP_MSK (_ULCAST_(0x7) << 0) - -/* GCR_Cx_RESET_BASE register fields */ -#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_SHF 12 -#define CM_GCR_Cx_RESET_BASE_BEVEXCBASE_MSK (_ULCAST_(0xfffff) << 12) - -/* GCR_Cx_RESET_EXT_BASE register fields */ -#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_SHF 31 -#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET_MSK (_ULCAST_(0x1) << 31) -#define CM_GCR_Cx_RESET_EXT_BASE_UEB_SHF 30 -#define CM_GCR_Cx_RESET_EXT_BASE_UEB_MSK (_ULCAST_(0x1) << 30) -#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_SHF 20 -#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK_MSK (_ULCAST_(0xff) << 20) -#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_SHF 1 -#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA_MSK (_ULCAST_(0x7f) << 1) -#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_SHF 0 -#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT_MSK (_ULCAST_(0x1) << 0) +/* GCR_Cx_RESET_EXT_BASE - Configure behaviour when cores reset or power up */ +GCR_CX_ACCESSOR_RW(32, 0x030, reset_ext_base) +#define CM_GCR_Cx_RESET_EXT_BASE_EVARESET BIT(31) +#define CM_GCR_Cx_RESET_EXT_BASE_UEB BIT(30) +#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCMASK GENMASK(27, 20) +#define CM_GCR_Cx_RESET_EXT_BASE_BEVEXCPA GENMASK(7, 1) +#define CM_GCR_Cx_RESET_EXT_BASE_PRESENT BIT(0) /** * mips_cm_numcores - return the number of cores present in the system @@ -345,8 +294,8 @@ static inline unsigned mips_cm_numcores(void) if (!mips_cm_present()) return 0; - return ((read_gcr_config() & CM_GCR_CONFIG_PCORES_MSK) - >> CM_GCR_CONFIG_PCORES_SHF) + 1; + return ((read_gcr_config() & CM_GCR_CONFIG_PCORES) + >> __ffs(CM_GCR_CONFIG_PCORES)) + 1; } /** @@ -360,8 +309,8 @@ static inline unsigned mips_cm_numiocu(void) if (!mips_cm_present()) return 0; - return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU_MSK) - >> CM_GCR_CONFIG_NUMIOCU_SHF; + return (read_gcr_config() & CM_GCR_CONFIG_NUMIOCU) + >> __ffs(CM_GCR_CONFIG_NUMIOCU); } /** @@ -405,7 +354,7 @@ static inline unsigned int mips_cm_max_vp_width(void) uint32_t cfg; if (mips_cm_revision() >= CM_REV_CM3) - return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK; + return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW; if (mips_cm_present()) { /* @@ -413,8 +362,8 @@ static inline unsigned int mips_cm_max_vp_width(void) * number of VP(E)s, and if that ever changes then this will * need revisiting. */ - cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE_MSK; - return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1; + cfg = read_gcr_cl_config() & CM_GCR_Cx_CONFIG_PVPE; + return (cfg >> __ffs(CM_GCR_Cx_CONFIG_PVPE)) + 1; } if (IS_ENABLED(CONFIG_SMP)) diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index 8b6b4976fb2f..91b861ebc907 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -167,8 +167,8 @@ phys_addr_t __mips_cm_l2sync_phys_base(void) * current location. */ base_reg = read_gcr_l2_only_sync_base(); - if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK) - return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK; + if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN) + return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE; /* Default to following the CM */ return mips_cm_phys_base() + MIPS_CM_GCR_SIZE; @@ -183,19 +183,19 @@ static void mips_cm_probe_l2sync(void) phys_addr_t addr; /* L2-only sync was introduced with CM major revision 6 */ - major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR_MSK) >> - CM_GCR_REV_MAJOR_SHF; + major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >> + __ffs(CM_GCR_REV_MAJOR); if (major_rev < 6) return; /* Find a location for the L2 sync region */ addr = mips_cm_l2sync_phys_base(); - BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE_MSK) != addr); + BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr); if (!addr) return; /* Set the region base address & enable it */ - write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN_MSK); + write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN); /* Map the region */ mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE); @@ -215,7 +215,7 @@ int mips_cm_probe(void) return 0; addr = mips_cm_phys_base(); - BUG_ON((addr & CM_GCR_BASE_GCRBASE_MSK) != addr); + BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr); if (!addr) return -ENODEV; @@ -225,7 +225,7 @@ int mips_cm_probe(void) /* sanity check that we're looking at a CM */ base_reg = read_gcr_base(); - if ((base_reg & CM_GCR_BASE_GCRBASE_MSK) != addr) { + if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) { pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n", (unsigned long)addr); mips_gcr_base = NULL; @@ -233,19 +233,19 @@ int mips_cm_probe(void) } /* set default target to memory */ - base_reg &= ~CM_GCR_BASE_CMDEFTGT_MSK; + base_reg &= ~CM_GCR_BASE_CMDEFTGT; base_reg |= CM_GCR_BASE_CMDEFTGT_MEM; write_gcr_base(base_reg); /* disable CM regions */ - write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); - write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK); - write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK); + write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK); + write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR); + write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK); /* probe for an L2-only sync region */ mips_cm_probe_l2sync(); @@ -267,8 +267,8 @@ void mips_cm_lock_other(unsigned int core, unsigned int vp) preempt_disable(); if (mips_cm_revision() >= CM_REV_CM3) { - val = core << CM3_GCR_Cx_OTHER_CORE_SHF; - val |= vp << CM3_GCR_Cx_OTHER_VP_SHF; + val = core << __ffs(CM3_GCR_Cx_OTHER_CORE); + val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP); /* * We need to disable interrupts in SMP systems in order to @@ -293,7 +293,7 @@ void mips_cm_lock_other(unsigned int core, unsigned int vp) spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core), per_cpu(cm_core_lock_flags, curr_core)); - val = core << CM_GCR_Cx_OTHER_CORENUM_SHF; + val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM); } write_gcr_cl_other(val); @@ -337,8 +337,8 @@ void mips_cm_error_report(void) cm_other = read_gcr_error_mult(); if (revision < CM_REV_CM3) { /* CM2 */ - cause = cm_error >> CM_GCR_ERROR_CAUSE_ERRTYPE_SHF; - ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; + cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE); + ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND); if (!cause) return; @@ -380,8 +380,8 @@ void mips_cm_error_report(void) ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits; ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit; - cause = cm_error >> CM3_GCR_ERROR_CAUSE_ERRTYPE_SHF; - ocause = cm_other >> CM_GCR_ERROR_MULT_ERR2ND_SHF; + cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE); + ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND); if (!cause) return; diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c index a4964c334cab..690eefd0fb54 100644 --- a/arch/mips/kernel/mips-cpc.c +++ b/arch/mips/kernel/mips-cpc.c @@ -40,13 +40,13 @@ static phys_addr_t mips_cpc_phys_base(void) if (!mips_cm_present()) return 0; - if (!(read_gcr_cpc_status() & CM_GCR_CPC_STATUS_EX_MSK)) + if (!(read_gcr_cpc_status() & CM_GCR_CPC_STATUS_EX)) return 0; /* If the CPC is already enabled, leave it so */ cpc_base = read_gcr_cpc_base(); - if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK) - return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK; + if (cpc_base & CM_GCR_CPC_BASE_CPCEN) + return cpc_base & CM_GCR_CPC_BASE_CPCBASE; /* Otherwise, use the default address */ cpc_base = mips_cpc_default_phys_base(); @@ -54,7 +54,7 @@ static phys_addr_t mips_cpc_phys_base(void) return cpc_base; /* Enable the CPC, mapped at the default address */ - write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK); + write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN); return cpc_base; } diff --git a/arch/mips/kernel/pm-cps.c b/arch/mips/kernel/pm-cps.c index 2121ed635824..eea714c1a5eb 100644 --- a/arch/mips/kernel/pm-cps.c +++ b/arch/mips/kernel/pm-cps.c @@ -569,8 +569,8 @@ static void *cps_gen_entry_code(unsigned cpu, enum cps_pm_state state) * rest will just be performing a rather unusual nop. */ uasm_i_addiu(&p, t0, zero, mips_cm_revision() < CM_REV_CM3 - ? CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK - : CM3_GCR_Cx_COHERENCE_COHEN_MSK); + ? CM_GCR_Cx_COHERENCE_COHDOMAINEN + : CM3_GCR_Cx_COHERENCE_COHEN); uasm_i_sw(&p, t0, 0, r_pcohctl); uasm_i_lw(&p, t0, 0, r_pcohctl); diff --git a/arch/mips/kernel/smp-cps.c b/arch/mips/kernel/smp-cps.c index a6b8700563c7..b544d3df3b73 100644 --- a/arch/mips/kernel/smp-cps.c +++ b/arch/mips/kernel/smp-cps.c @@ -53,9 +53,9 @@ static unsigned core_vpe_count(unsigned core) return 1; mips_cm_lock_other(core, 0); - cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE_MSK; + cfg = read_gcr_co_config() & CM_GCR_Cx_CONFIG_PVPE; mips_cm_unlock_other(); - return (cfg >> CM_GCR_Cx_CONFIG_PVPE_SHF) + 1; + return cfg + 1; } static void __init cps_smp_setup(void) @@ -225,11 +225,11 @@ static void boot_core(unsigned int core, unsigned int vpe_id) write_gcr_co_coherence(0); /* Start it with the legacy memory map and exception base */ - write_gcr_co_reset_ext_base(CM_GCR_RESET_EXT_BASE_UEB); + write_gcr_co_reset_ext_base(CM_GCR_Cx_RESET_EXT_BASE_UEB); /* Ensure the core can access the GCRs */ access = read_gcr_access(); - access |= 1 << (CM_GCR_ACCESS_ACCESSEN_SHF + core); + access |= 1 << core; write_gcr_access(access); if (mips_cpc_present()) { @@ -599,7 +599,7 @@ int register_cps_smp_ops(void) } /* check we have a GIC - we need one for IPIs */ - if (!(read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX_MSK)) { + if (!(read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX)) { pr_warn("MIPS CPS SMP unable to proceed without a GIC\n"); return -ENODEV; } diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index f3a69de9dc6b..4cba2e778284 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1672,7 +1672,7 @@ static inline void parity_protection_init(void) /* Probe L2 ECC support */ gcr_ectl = read_gcr_err_control(); - if (!(gcr_ectl & CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT_MSK) || + if (!(gcr_ectl & CM_GCR_ERR_CONTROL_L2_ECC_SUPPORT) || !(cp0_ectl & ERRCTL_PE)) { /* * One of L1 or L2 ECC checking isn't supported, @@ -1692,12 +1692,12 @@ static inline void parity_protection_init(void) /* Configure L2 ECC checking */ if (l2parity) - gcr_ectl |= CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK; + gcr_ectl |= CM_GCR_ERR_CONTROL_L2_ECC_EN; else - gcr_ectl &= ~CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK; + gcr_ectl &= ~CM_GCR_ERR_CONTROL_L2_ECC_EN; write_gcr_err_control(gcr_ectl); gcr_ectl = read_gcr_err_control(); - gcr_ectl &= CM_GCR_ERR_CONTROL_L2_ECC_EN_MSK; + gcr_ectl &= CM_GCR_ERR_CONTROL_L2_ECC_EN; WARN_ON(!!gcr_ectl != l2parity); pr_info("Cache parity protection %sabled\n", diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index c909c3342729..7f30397cb10d 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -63,15 +63,15 @@ static void mips_sc_prefetch_enable(void) * prefetching for both code & data, for all ports. */ pftctl = read_gcr_l2_pft_control(); - if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) { - pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK; - pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK; - pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK; + if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT) { + pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK; + pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK; + pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN; write_gcr_l2_pft_control(pftctl); pftctl = read_gcr_l2_pft_control_b(); - pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK; - pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK; + pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID; + pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN; write_gcr_l2_pft_control_b(pftctl); } } @@ -84,12 +84,12 @@ static void mips_sc_prefetch_disable(void) return; pftctl = read_gcr_l2_pft_control(); - pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK; + pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN; write_gcr_l2_pft_control(pftctl); pftctl = read_gcr_l2_pft_control_b(); - pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK; - pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK; + pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID; + pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN; write_gcr_l2_pft_control_b(pftctl); } @@ -101,9 +101,9 @@ static bool mips_sc_prefetch_is_enabled(void) return false; pftctl = read_gcr_l2_pft_control(); - if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK)) + if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT)) return false; - return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK); + return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN); } static struct bcache_ops mips_sc_ops = { @@ -160,21 +160,21 @@ static int __init mips_sc_probe_cm3(void) unsigned long cfg = read_gcr_l2_config(); unsigned long sets, line_sz, assoc; - if (cfg & CM_GCR_L2_CONFIG_BYPASS_MSK) + if (cfg & CM_GCR_L2_CONFIG_BYPASS) return 0; - sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK; - sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF; + sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE; + sets >>= __ffs(CM_GCR_L2_CONFIG_SET_SIZE); if (sets) c->scache.sets = 64 << sets; - line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK; - line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF; + line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE; + line_sz >>= __ffs(CM_GCR_L2_CONFIG_LINE_SIZE); if (line_sz) c->scache.linesz = 2 << line_sz; - assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK; - assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF; + assoc = cfg & CM_GCR_L2_CONFIG_ASSOC; + assoc >>= __ffs(CM_GCR_L2_CONFIG_ASSOC); c->scache.ways = assoc + 1; c->scache.waysize = c->scache.sets * c->scache.linesz; c->scache.waybit = __ffs(c->scache.waysize); diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c index c398582c316f..4352e43aee65 100644 --- a/arch/mips/mti-malta/malta-dtshim.c +++ b/arch/mips/mti-malta/malta-dtshim.c @@ -236,7 +236,7 @@ static void __init remove_gic(void *fdt) /* if we have a CM which reports a GIC is present, leave the DT alone */ err = mips_cm_probe(); - if (!err && (read_gcr_gic_status() & CM_GCR_GIC_STATUS_GICEX_MSK)) + if (!err && (read_gcr_gic_status() & CM_GCR_GIC_STATUS_EX)) return; if (malta_scon() == MIPS_REVISION_SCON_ROCIT) { |