diff options
Diffstat (limited to 'arch/mips/sgi-ip22/ip22-irq.S')
| -rw-r--r-- | arch/mips/sgi-ip22/ip22-irq.S | 118 |
1 files changed, 0 insertions, 118 deletions
diff --git a/arch/mips/sgi-ip22/ip22-irq.S b/arch/mips/sgi-ip22/ip22-irq.S deleted file mode 100644 index 6ccbd9e1d967..000000000000 --- a/arch/mips/sgi-ip22/ip22-irq.S +++ /dev/null @@ -1,118 +0,0 @@ -/* - * ip22-irq.S: Interrupt exception dispatch code for FullHouse and - * Guiness. - * - * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com) - */ - -#include <asm/asm.h> -#include <asm/mipsregs.h> -#include <asm/regdef.h> -#include <asm/stackframe.h> - -/* A lot of complication here is taken away because: - * - * 1) We handle one interrupt and return, sitting in a loop and moving across - * all the pending IRQ bits in the cause register is _NOT_ the answer, the - * common case is one pending IRQ so optimize in that direction. - * - * 2) We need not check against bits in the status register IRQ mask, that - * would make this routine slow as hell. - * - * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in - * between like BSD spl() brain-damage. - * - * Furthermore, the IRQs on the INDY look basically (barring software IRQs - * which we don't use at all) like: - * - * MIPS IRQ Source - * -------- ------ - * 0 Software (ignored) - * 1 Software (ignored) - * 2 Local IRQ level zero - * 3 Local IRQ level one - * 4 8254 Timer zero - * 5 8254 Timer one - * 6 Bus Error - * 7 R4k timer (what we use) - * - * We handle the IRQ according to _our_ priority which is: - * - * Highest ---- R4k Timer - * Local IRQ zero - * Local IRQ one - * Bus Error - * 8254 Timer zero - * Lowest ---- 8254 Timer one - * - * then we just return, if multiple IRQs are pending then we will just take - * another exception, big deal. - */ - - .text - .set noreorder - .set noat - .align 5 - NESTED(indyIRQ, PT_SIZE, sp) - SAVE_ALL - CLI - .set at - mfc0 s0, CP0_CAUSE # get irq mask - - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check local level zero - - /* Wheee, a timer interrupt. */ - jal indy_r4k_timer_interrupt - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check local level one - - /* Wheee, local level zero interrupt. */ - jal indy_local0_irqdispatch - move a0, sp # delay slot - - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP6 # delay slot, check bus error - - /* Wheee, local level one interrupt. */ - jal indy_local1_irqdispatch - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - beq a0, zero, 1f - andi a0, s0, (CAUSEF_IP4 | CAUSEF_IP5) # delay slot - - /* Wheee, an asynchronous bus error... */ - jal indy_buserror_irq - move a0, sp # delay slot - j ret_from_irq - nop # delay slot - -1: - /* Here by mistake? It is possible, that by the time we take - * the exception the IRQ pin goes low, so just leave if this - * is the case. - */ - beq a0, zero, 1f - nop # delay slot - - /* Must be one of the 8254 timers... */ - jal indy_8254timer_irq - move a0, sp # delay slot -1: - j ret_from_irq - nop # delay slot - END(indyIRQ) |