summaryrefslogtreecommitdiffstats
path: root/arch/mips/ralink
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/ralink')
-rw-r--r--arch/mips/ralink/Kconfig23
-rw-r--r--arch/mips/ralink/Makefile3
-rw-r--r--arch/mips/ralink/Platform18
-rw-r--r--arch/mips/ralink/common.h11
-rw-r--r--arch/mips/ralink/dts/Makefile3
-rw-r--r--arch/mips/ralink/dts/mt7620a.dtsi58
-rw-r--r--arch/mips/ralink/dts/mt7620a_eval.dts16
-rw-r--r--arch/mips/ralink/dts/rt2880.dtsi58
-rw-r--r--arch/mips/ralink/dts/rt2880_eval.dts46
-rw-r--r--arch/mips/ralink/dts/rt3050.dtsi52
-rw-r--r--arch/mips/ralink/dts/rt3052_eval.dts12
-rw-r--r--arch/mips/ralink/dts/rt3883.dtsi58
-rw-r--r--arch/mips/ralink/dts/rt3883_eval.dts16
-rw-r--r--arch/mips/ralink/early_printk.c4
-rw-r--r--arch/mips/ralink/irq.c5
-rw-r--r--arch/mips/ralink/mt7620.c234
-rw-r--r--arch/mips/ralink/of.c9
-rw-r--r--arch/mips/ralink/rt288x.c143
-rw-r--r--arch/mips/ralink/rt305x.c70
-rw-r--r--arch/mips/ralink/rt3883.c246
20 files changed, 1019 insertions, 66 deletions
diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
index a0b0197cab0a..026e823d871d 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -6,12 +6,23 @@ choice
help
Select Ralink MIPS SoC type.
+ config SOC_RT288X
+ bool "RT288x"
+
config SOC_RT305X
bool "RT305x"
select USB_ARCH_HAS_HCD
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
+ config SOC_RT3883
+ bool "RT3883"
+ select USB_ARCH_HAS_OHCI
+ select USB_ARCH_HAS_EHCI
+
+ config SOC_MT7620
+ bool "MT7620"
+
endchoice
choice
@@ -23,10 +34,22 @@ choice
config DTB_RT_NONE
bool "None"
+ config DTB_RT2880_EVAL
+ bool "RT2880 eval kit"
+ depends on SOC_RT288X
+
config DTB_RT305X_EVAL
bool "RT305x eval kit"
depends on SOC_RT305X
+ config DTB_RT3883_EVAL
+ bool "RT3883 eval kit"
+ depends on SOC_RT3883
+
+ config DTB_MT7620A_EVAL
+ bool "MT7620A eval kit"
+ depends on SOC_MT7620
+
endchoice
endif
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
index 939757f0e71f..38cf1a880aaa 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -8,7 +8,10 @@
obj-y := prom.o of.o reset.o clk.o irq.o
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
index 6babd65765e6..cda4b6645c50 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
@@ -5,6 +5,24 @@ core-$(CONFIG_RALINK) += arch/mips/ralink/
cflags-$(CONFIG_RALINK) += -I$(srctree)/arch/mips/include/asm/mach-ralink
#
+# Ralink RT288x
+#
+load-$(CONFIG_SOC_RT288X) += 0xffffffff88000000
+cflags-$(CONFIG_SOC_RT288X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
+
+#
# Ralink RT305x
#
load-$(CONFIG_SOC_RT305X) += 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT305X) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
+
+#
+# Ralink RT3883
+#
+load-$(CONFIG_SOC_RT3883) += 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
+
+#
+# Ralink MT7620
+#
+load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
index 300990313e1b..83144c3fc5ac 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -22,13 +22,22 @@ struct ralink_pinmux {
struct ralink_pinmux_grp *mode;
struct ralink_pinmux_grp *uart;
int uart_shift;
+ u32 uart_mask;
void (*wdt_reset)(void);
+ struct ralink_pinmux_grp *pci;
+ int pci_shift;
+ u32 pci_mask;
};
-extern struct ralink_pinmux gpio_pinmux;
+extern struct ralink_pinmux rt_gpio_pinmux;
struct ralink_soc_info {
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
unsigned char *compatible;
+
+ unsigned long mem_base;
+ unsigned long mem_size;
+ unsigned long mem_size_min;
+ unsigned long mem_size_max;
};
extern struct ralink_soc_info soc_info;
diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
index 1a69fb300955..18194fa93e80 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
@@ -1 +1,4 @@
+obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
+obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
new file mode 100644
index 000000000000..08bf24fefe9f
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
@@ -0,0 +1,58 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,mtk7620a-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,mt7620a-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/mt7620a_eval.dts b/arch/mips/ralink/dts/mt7620a_eval.dts
new file mode 100644
index 000000000000..35eb874ab7f1
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7620a_eval.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
+ model = "Ralink MT7620A evaluation board";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
diff --git a/arch/mips/ralink/dts/rt2880.dtsi b/arch/mips/ralink/dts/rt2880.dtsi
new file mode 100644
index 000000000000..182afde2f2e1
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880.dtsi
@@ -0,0 +1,58 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt2880-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips4KEc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@300000 {
+ compatible = "palmbus";
+ reg = <0x300000 0x200000>;
+ ranges = <0x0 0x300000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt2880-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt2880-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <8>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/rt2880_eval.dts b/arch/mips/ralink/dts/rt2880_eval.dts
new file mode 100644
index 000000000000..322d7002595b
--- /dev/null
+++ b/arch/mips/ralink/dts/rt2880_eval.dts
@@ -0,0 +1,46 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+ compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc";
+ model = "Ralink RT2880 evaluation board";
+
+ memory@0 {
+ reg = <0x8000000 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x400000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x3b0000>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
index 069d0660e1dd..ef7da1e227e6 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -1,7 +1,7 @@
/ {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc";
cpus {
cpu@0 {
@@ -9,10 +9,6 @@
};
};
- chosen {
- bootargs = "console=ttyS0,57600 init=/init";
- };
-
cpuintc: cpuintc@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -23,7 +19,7 @@
palmbus@10000000 {
compatible = "palmbus";
reg = <0x10000000 0x200000>;
- ranges = <0x0 0x10000000 0x1FFFFF>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
#address-cells = <1>;
#size-cells = <1>;
@@ -33,11 +29,6 @@
reg = <0x0 0x100>;
};
- timer@100 {
- compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
- reg = <0x100 0x100>;
- };
-
intc: intc@200 {
compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
reg = <0x200 0x100>;
@@ -54,45 +45,6 @@
reg = <0x300 0x100>;
};
- gpio0: gpio@600 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x600 0x34>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <24>;
- ralink,regs = [ 00 04 08 0c
- 20 24 28 2c
- 30 34 ];
- };
-
- gpio1: gpio@638 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x638 0x24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <16>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
- };
-
- gpio2: gpio@660 {
- compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
- reg = <0x660 0x24>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- ralink,ngpio = <12>;
- ralink,regs = [ 00 04 08 0c
- 10 14 18 1c
- 20 24 ];
- };
-
uartlite@c00 {
compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
reg = <0xc00 0x100>;
diff --git a/arch/mips/ralink/dts/rt3052_eval.dts b/arch/mips/ralink/dts/rt3052_eval.dts
index 148a590bc419..c18c9a84f4c4 100644
--- a/arch/mips/ralink/dts/rt3052_eval.dts
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -1,10 +1,8 @@
/dts-v1/;
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
model = "Ralink RT3052 evaluation board";
@@ -12,12 +10,8 @@
reg = <0x0 0x2000000>;
};
- palmbus@10000000 {
- sysc@0 {
- ralink,pinmmux = "uartlite", "spi";
- ralink,uartmux = "gpio";
- ralink,wdtmux = <0>;
- };
+ chosen {
+ bootargs = "console=ttyS0,57600";
};
cfi@1f000000 {
diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
new file mode 100644
index 000000000000..3b131dd0d5ac
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3883.dtsi
@@ -0,0 +1,58 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3883-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips74Kc";
+ };
+ };
+
+ cpuintc: cpuintc@0 {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ compatible = "mti,cpu-interrupt-controller";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3883-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <2>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3883-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
diff --git a/arch/mips/ralink/dts/rt3883_eval.dts b/arch/mips/ralink/dts/rt3883_eval.dts
new file mode 100644
index 000000000000..2fa6b330bf4f
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3883_eval.dts
@@ -0,0 +1,16 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+ compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc";
+ model = "Ralink RT3883 evaluation board";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
index c4ae47eb24ab..b46d0419d09b 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -11,7 +11,11 @@
#include <asm/addrspace.h>
+#ifdef CONFIG_SOC_RT288X
+#define EARLY_UART_BASE 0x300c00
+#else
#define EARLY_UART_BASE 0x10000c00
+#endif
#define UART_REG_RX 0x00
#define UART_REG_TX 0x04
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
index 6d054c5ec9ab..320b1f1043ff 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -31,6 +31,7 @@
#define INTC_INT_GLOBAL BIT(31)
#define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2)
+#define RALINK_CPU_IRQ_PCI (MIPS_CPU_IRQ_BASE + 4)
#define RALINK_CPU_IRQ_FE (MIPS_CPU_IRQ_BASE + 5)
#define RALINK_CPU_IRQ_WIFI (MIPS_CPU_IRQ_BASE + 6)
#define RALINK_CPU_IRQ_COUNTER (MIPS_CPU_IRQ_BASE + 7)
@@ -104,6 +105,9 @@ asmlinkage void plat_irq_dispatch(void)
else if (pending & STATUSF_IP6)
do_IRQ(RALINK_CPU_IRQ_WIFI);
+ else if (pending & STATUSF_IP4)
+ do_IRQ(RALINK_CPU_IRQ_PCI);
+
else if (pending & STATUSF_IP2)
do_IRQ(RALINK_CPU_IRQ_INTC);
@@ -162,6 +166,7 @@ static int __init intc_of_init(struct device_node *node,
irq_set_chained_handler(irq, ralink_intc_irq_handler);
irq_set_handler_data(irq, domain);
+ /* tell the kernel which irq is used for performance monitoring */
cp0_perfcount_irq = irq_create_mapping(domain, 9);
return 0;
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
new file mode 100644
index 000000000000..0018b1a661f6
--- /dev/null
+++ b/arch/mips/ralink/mt7620.c
@@ -0,0 +1,234 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#include "common.h"
+
+/* does the board have sdram or ddram */
+static int dram_type;
+
+/* the pll dividers */
+static u32 mt7620_clk_divider[] = { 2, 3, 4, 8 };
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = MT7620_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = MT7620_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = MT7620_GPIO_MODE_UART1,
+ .gpio_first = 15,
+ .gpio_last = 16,
+ }, {
+ .name = "wdt",
+ .mask = MT7620_GPIO_MODE_WDT,
+ .gpio_first = 17,
+ .gpio_last = 17,
+ }, {
+ .name = "mdio",
+ .mask = MT7620_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "rgmii1",
+ .mask = MT7620_GPIO_MODE_RGMII1,
+ .gpio_first = 24,
+ .gpio_last = 35,
+ }, {
+ .name = "spi refclk",
+ .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
+ .gpio_first = 37,
+ .gpio_last = 39,
+ }, {
+ .name = "jtag",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ /* shared lines with jtag */
+ .name = "ephy",
+ .mask = MT7620_GPIO_MODE_EPHY,
+ .gpio_first = 40,
+ .gpio_last = 44,
+ }, {
+ .name = "nand",
+ .mask = MT7620_GPIO_MODE_JTAG,
+ .gpio_first = 45,
+ .gpio_last = 59,
+ }, {
+ .name = "rgmii2",
+ .mask = MT7620_GPIO_MODE_RGMII2,
+ .gpio_first = 60,
+ .gpio_last = 71,
+ }, {
+ .name = "wled",
+ .mask = MT7620_GPIO_MODE_WLED,
+ .gpio_first = 72,
+ .gpio_last = 72,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = MT7620_GPIO_MODE_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm uartf",
+ .mask = MT7620_GPIO_MODE_PCM_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm i2s",
+ .mask = MT7620_GPIO_MODE_PCM_I2S,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "i2s uartf",
+ .mask = MT7620_GPIO_MODE_I2S_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "pcm gpio",
+ .mask = MT7620_GPIO_MODE_PCM_GPIO,
+ .gpio_first = 11,
+ .gpio_last = 14,
+ }, {
+ .name = "gpio uartf",
+ .mask = MT7620_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio i2s",
+ .mask = MT7620_GPIO_MODE_GPIO_I2S,
+ .gpio_first = 7,
+ .gpio_last = 10,
+ }, {
+ .name = "gpio",
+ .mask = MT7620_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 c0 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+ u32 c1 = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+ u32 swconfig = (c0 >> CPLL_SW_CONFIG_SHIFT) & CPLL_SW_CONFIG_MASK;
+ u32 cpu_clk = (c1 >> CPLL_CPU_CLK_SHIFT) & CPLL_CPU_CLK_MASK;
+
+ if (cpu_clk) {
+ cpu_rate = 480000000;
+ } else if (!swconfig) {
+ cpu_rate = 600000000;
+ } else {
+ u32 m = (c0 >> CPLL_MULT_RATIO_SHIFT) & CPLL_MULT_RATIO;
+ u32 d = (c0 >> CPLL_DIV_RATIO_SHIFT) & CPLL_DIV_RATIO;
+
+ cpu_rate = ((40 * (m + 24)) / mt7620_clk_divider[d]) * 1000000;
+ }
+
+ if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
+ sys_rate = cpu_rate / 4;
+ else
+ sys_rate = cpu_rate / 3;
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", 40000000);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+ unsigned char *name = NULL;
+ u32 n0;
+ u32 n1;
+ u32 rev;
+ u32 cfg0;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+ if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+ } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+ }
+
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+
+ cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+
+ switch (dram_type) {
+ case SYSCFG0_DRAM_TYPE_SDRAM:
+ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+ break;
+
+ case SYSCFG0_DRAM_TYPE_DDR1:
+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+ break;
+
+ case SYSCFG0_DRAM_TYPE_DDR2:
+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+ break;
+ default:
+ BUG();
+ }
+ soc_info->mem_base = MT7620_DRAM_BASE;
+}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
index 4165e70775be..fb1569580def 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -11,6 +11,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/init.h>
+#include <linux/sizes.h>
#include <linux/of_fdt.h>
#include <linux/kernel.h>
#include <linux/bootmem.h>
@@ -85,6 +86,14 @@ void __init plat_mem_setup(void)
* parsed resulting in our memory appearing
*/
__dt_setup_arch(&__dtb_start);
+
+ if (soc_info.mem_size)
+ add_memory_region(soc_info.mem_base, soc_info.mem_size,
+ BOOT_MEM_RAM);
+ else
+ detect_memory_region(soc_info.mem_base,
+ soc_info.mem_size_min * SZ_1M,
+ soc_info.mem_size_max * SZ_1M);
}
static int __init plat_of_setup(void)
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
new file mode 100644
index 000000000000..f87de1ab2198
--- /dev/null
+++ b/arch/mips/ralink/rt288x.c
@@ -0,0 +1,143 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt288x.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT2880_GPIO_MODE_I2C,
+ .gpio_first = 1,
+ .gpio_last = 2,
+ }, {
+ .name = "spi",
+ .mask = RT2880_GPIO_MODE_SPI,
+ .gpio_first = 3,
+ .gpio_last = 6,
+ }, {
+ .name = "uartlite",
+ .mask = RT2880_GPIO_MODE_UART0,
+ .gpio_first = 7,
+ .gpio_last = 14,
+ }, {
+ .name = "jtag",
+ .mask = RT2880_GPIO_MODE_JTAG,
+ .gpio_first = 17,
+ .gpio_last = 21,
+ }, {
+ .name = "mdio",
+ .mask = RT2880_GPIO_MODE_MDIO,
+ .gpio_first = 22,
+ .gpio_last = 23,
+ }, {
+ .name = "sdram",
+ .mask = RT2880_GPIO_MODE_SDRAM,
+ .gpio_first = 24,
+ .gpio_last = 39,
+ }, {
+ .name = "pci",
+ .mask = RT2880_GPIO_MODE_PCI,
+ .gpio_first = 40,
+ .gpio_last = 71,
+ }, {0}
+};
+
+static void rt288x_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on pin SRAM_CS_N */
+ t = rt_sysc_r32(SYSC_REG_CLKCFG);
+ t |= CLKCFG_SRAM_CS_N_WDT;
+ rt_sysc_w32(t, SYSC_REG_CLKCFG);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .wdt_reset = rt288x_wdt_reset,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate;
+ u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+ t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+ switch (t) {
+ case SYSTEM_CONFIG_CPUCLK_250:
+ cpu_rate = 250000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_266:
+ cpu_rate = 266666667;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_280:
+ cpu_rate = 280000000;
+ break;
+ case SYSTEM_CONFIG_CPUCLK_300:
+ cpu_rate = 300000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("300100.timer", cpu_rate / 2);
+ ralink_clk_add("300120.watchdog", cpu_rate / 2);
+ ralink_clk_add("300500.uart", cpu_rate / 2);
+ ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+ ralink_clk_add("400000.ethernet", cpu_rate / 2);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+ id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+ if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
+ soc_info->compatible = "ralink,r2880-soc";
+ name = "RT2880";
+ } else {
+ panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s id:%u rev:%u",
+ name,
+ (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+ (id & CHIP_ID_REV_MASK));
+
+ soc_info->mem_base = RT2880_SDRAM_BASE;
+ soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
index 0a4bbdcf59d9..ca7ee3a33790 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -22,7 +22,7 @@
enum rt305x_soc_type rt305x_soc;
-struct ralink_pinmux_grp mode_mux[] = {
+static struct ralink_pinmux_grp mode_mux[] = {
{
.name = "i2c",
.mask = RT305X_GPIO_MODE_I2C,
@@ -61,7 +61,7 @@ struct ralink_pinmux_grp mode_mux[] = {
}, {0}
};
-struct ralink_pinmux_grp uart_mux[] = {
+static struct ralink_pinmux_grp uart_mux[] = {
{
.name = "uartf",
.mask = RT305X_GPIO_MODE_UARTF,
@@ -91,19 +91,19 @@ struct ralink_pinmux_grp uart_mux[] = {
.name = "gpio uartf",
.mask = RT305X_GPIO_MODE_GPIO_UARTF,
.gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
+ .gpio_last = RT305X_GPIO_10,
}, {
.name = "gpio i2s",
.mask = RT305X_GPIO_MODE_GPIO_I2S,
.gpio_first = RT305X_GPIO_7,
- .gpio_last = RT305X_GPIO_14,
+ .gpio_last = RT305X_GPIO_10,
}, {
.name = "gpio",
.mask = RT305X_GPIO_MODE_GPIO,
}, {0}
};
-void rt305x_wdt_reset(void)
+static void rt305x_wdt_reset(void)
{
u32 t;
@@ -114,16 +114,53 @@ void rt305x_wdt_reset(void)
rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
}
-struct ralink_pinmux gpio_pinmux = {
+struct ralink_pinmux rt_gpio_pinmux = {
.mode = mode_mux,
.uart = uart_mux,
.uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
.wdt_reset = rt305x_wdt_reset,
};
+static unsigned long rt5350_get_mem_size(void)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+ unsigned long ret;
+ u32 t;
+
+ t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+ t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
+ RT5350_SYSCFG0_DRAM_SIZE_MASK;
+
+ switch (t) {
+ case RT5350_SYSCFG0_DRAM_SIZE_2M:
+ ret = 2;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_8M:
+ ret = 8;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_16M:
+ ret = 16;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_32M:
+ ret = 32;
+ break;
+ case RT5350_SYSCFG0_DRAM_SIZE_64M:
+ ret = 64;
+ break;
+ default:
+ panic("rt5350: invalid DRAM size: %u", t);
+ break;
+ }
+
+ return ret;
+}
+
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+ unsigned long wmac_rate = 40000000;
+
u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
if (soc_is_rt305x() || soc_is_rt3350()) {
@@ -176,11 +213,21 @@ void __init ralink_clk_init(void)
BUG();
}
+ if (soc_is_rt3352() || soc_is_rt5350()) {
+ u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
+
+ if (!(val & RT3352_CLKCFG0_XTAL_SEL))
+ wmac_rate = 20000000;
+ }
+
ralink_clk_add("cpu", cpu_rate);
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
+ ralink_clk_add("10000120.watchdog", wdt_rate);
ralink_clk_add("10000500.uart", uart_rate);
ralink_clk_add("10000c00.uartlite", uart_rate);
+ ralink_clk_add("10100000.ethernet", sys_rate);
+ ralink_clk_add("10180000.wmac", wmac_rate);
}
void __init ralink_of_remap(void)
@@ -239,4 +286,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
name,
(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
(id & CHIP_ID_REV_MASK));
+
+ soc_info->mem_base = RT305X_SDRAM_BASE;
+ if (soc_is_rt5350()) {
+ soc_info->mem_size = rt5350_get_mem_size();
+ } else if (soc_is_rt305x() || soc_is_rt3350()) {
+ soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
+ } else if (soc_is_rt3352()) {
+ soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
+ }
}
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
new file mode 100644
index 000000000000..b474ac284b83
--- /dev/null
+++ b/arch/mips/ralink/rt3883.c
@@ -0,0 +1,246 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt3883.h>
+
+#include "common.h"
+
+static struct ralink_pinmux_grp mode_mux[] = {
+ {
+ .name = "i2c",
+ .mask = RT3883_GPIO_MODE_I2C,
+ .gpio_first = RT3883_GPIO_I2C_SD,
+ .gpio_last = RT3883_GPIO_I2C_SCLK,
+ }, {
+ .name = "spi",
+ .mask = RT3883_GPIO_MODE_SPI,
+ .gpio_first = RT3883_GPIO_SPI_CS0,
+ .gpio_last = RT3883_GPIO_SPI_MISO,
+ }, {
+ .name = "uartlite",
+ .mask = RT3883_GPIO_MODE_UART1,
+ .gpio_first = RT3883_GPIO_UART1_TXD,
+ .gpio_last = RT3883_GPIO_UART1_RXD,
+ }, {
+ .name = "jtag",
+ .mask = RT3883_GPIO_MODE_JTAG,
+ .gpio_first = RT3883_GPIO_JTAG_TDO,
+ .gpio_last = RT3883_GPIO_JTAG_TCLK,
+ }, {
+ .name = "mdio",
+ .mask = RT3883_GPIO_MODE_MDIO,
+ .gpio_first = RT3883_GPIO_MDIO_MDC,
+ .gpio_last = RT3883_GPIO_MDIO_MDIO,
+ }, {
+ .name = "ge1",
+ .mask = RT3883_GPIO_MODE_GE1,
+ .gpio_first = RT3883_GPIO_GE1_TXD0,
+ .gpio_last = RT3883_GPIO_GE1_RXCLK,
+ }, {
+ .name = "ge2",
+ .mask = RT3883_GPIO_MODE_GE2,
+ .gpio_first = RT3883_GPIO_GE2_TXD0,
+ .gpio_last = RT3883_GPIO_GE2_RXCLK,
+ }, {
+ .name = "pci",
+ .mask = RT3883_GPIO_MODE_PCI,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "lna a",
+ .mask = RT3883_GPIO_MODE_LNA_A,
+ .gpio_first = RT3883_GPIO_LNA_PE_A0,
+ .gpio_last = RT3883_GPIO_LNA_PE_A2,
+ }, {
+ .name = "lna g",
+ .mask = RT3883_GPIO_MODE_LNA_G,
+ .gpio_first = RT3883_GPIO_LNA_PE_G0,
+ .gpio_last = RT3883_GPIO_LNA_PE_G2,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp uart_mux[] = {
+ {
+ .name = "uartf",
+ .mask = RT3883_GPIO_MODE_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm uartf",
+ .mask = RT3883_GPIO_MODE_PCM_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm i2s",
+ .mask = RT3883_GPIO_MODE_PCM_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "i2s uartf",
+ .mask = RT3883_GPIO_MODE_I2S_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "pcm gpio",
+ .mask = RT3883_GPIO_MODE_PCM_GPIO,
+ .gpio_first = RT3883_GPIO_11,
+ .gpio_last = RT3883_GPIO_14,
+ }, {
+ .name = "gpio uartf",
+ .mask = RT3883_GPIO_MODE_GPIO_UARTF,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_10,
+ }, {
+ .name = "gpio i2s",
+ .mask = RT3883_GPIO_MODE_GPIO_I2S,
+ .gpio_first = RT3883_GPIO_7,
+ .gpio_last = RT3883_GPIO_10,
+ }, {
+ .name = "gpio",
+ .mask = RT3883_GPIO_MODE_GPIO,
+ }, {0}
+};
+
+static struct ralink_pinmux_grp pci_mux[] = {
+ {
+ .name = "pci-dev",
+ .mask = 0,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host2",
+ .mask = 1,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-host1",
+ .mask = 2,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-fnc",
+ .mask = 3,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {
+ .name = "pci-gpio",
+ .mask = 7,
+ .gpio_first = RT3883_GPIO_PCI_AD0,
+ .gpio_last = RT3883_GPIO_PCI_AD31,
+ }, {0}
+};
+
+static void rt3883_wdt_reset(void)
+{
+ u32 t;
+
+ /* enable WDT reset output on GPIO 2 */
+ t = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG1);
+ t |= RT3883_SYSCFG1_GPIO2_AS_WDT_OUT;
+ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
+}
+
+struct ralink_pinmux rt_gpio_pinmux = {
+ .mode = mode_mux,
+ .uart = uart_mux,
+ .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
+ .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
+ .wdt_reset = rt3883_wdt_reset,
+ .pci = pci_mux,
+ .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
+ .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
+};
+
+void __init ralink_clk_init(void)
+{
+ unsigned long cpu_rate, sys_rate;
+ u32 syscfg0;
+ u32 clksel;
+ u32 ddr2;
+
+ syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
+ clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+ RT3883_SYSCFG0_CPUCLK_MASK);
+ ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+ switch (clksel) {
+ case RT3883_SYSCFG0_CPUCLK_250:
+ cpu_rate = 250000000;
+ sys_rate = (ddr2) ? 125000000 : 83000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_384:
+ cpu_rate = 384000000;
+ sys_rate = (ddr2) ? 128000000 : 96000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_480:
+ cpu_rate = 480000000;
+ sys_rate = (ddr2) ? 160000000 : 120000000;
+ break;
+ case RT3883_SYSCFG0_CPUCLK_500:
+ cpu_rate = 500000000;
+ sys_rate = (ddr2) ? 166000000 : 125000000;
+ break;
+ }
+
+ ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("10000100.timer", sys_rate);
+ ralink_clk_add("10000120.watchdog", sys_rate);
+ ralink_clk_add("10000500.uart", 40000000);
+ ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000c00.uartlite", 40000000);
+ ralink_clk_add("10100000.ethernet", sys_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+ rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
+ rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
+
+ if (!rt_sysc_membase || !rt_memc_membase)
+ panic("Failed to remap core resources");
+}
+
+void prom_soc_init(struct ralink_soc_info *soc_info)
+{
+ void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
+ const char *name;
+ u32 n0;
+ u32 n1;
+ u32 id;
+
+ n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
+ n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
+ id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+
+ if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
+ soc_info->compatible = "ralink,rt3883-soc";
+ name = "RT3883";
+ } else {
+ panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+ "Ralink %s ver:%u eco:%u",
+ name,
+ (id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+ (id & RT3883_REVID_ECO_ID_MASK));
+
+ soc_info->mem_base = RT3883_SDRAM_BASE;
+ soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
+ soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 18:02:35 +0000