diff options
Diffstat (limited to 'arch/mips/ralink/rt288x.c')
| -rw-r--r-- | arch/mips/ralink/rt288x.c | 143 |
1 files changed, 143 insertions, 0 deletions
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c new file mode 100644 index 000000000000..f87de1ab2198 --- /dev/null +++ b/arch/mips/ralink/rt288x.c @@ -0,0 +1,143 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Parts of this file are based on Ralink's 2.6.21 BSP + * + * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2013 John Crispin <blogic@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> + +#include <asm/mipsregs.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/rt288x.h> + +#include "common.h" + +static struct ralink_pinmux_grp mode_mux[] = { + { + .name = "i2c", + .mask = RT2880_GPIO_MODE_I2C, + .gpio_first = 1, + .gpio_last = 2, + }, { + .name = "spi", + .mask = RT2880_GPIO_MODE_SPI, + .gpio_first = 3, + .gpio_last = 6, + }, { + .name = "uartlite", + .mask = RT2880_GPIO_MODE_UART0, + .gpio_first = 7, + .gpio_last = 14, + }, { + .name = "jtag", + .mask = RT2880_GPIO_MODE_JTAG, + .gpio_first = 17, + .gpio_last = 21, + }, { + .name = "mdio", + .mask = RT2880_GPIO_MODE_MDIO, + .gpio_first = 22, + .gpio_last = 23, + }, { + .name = "sdram", + .mask = RT2880_GPIO_MODE_SDRAM, + .gpio_first = 24, + .gpio_last = 39, + }, { + .name = "pci", + .mask = RT2880_GPIO_MODE_PCI, + .gpio_first = 40, + .gpio_last = 71, + }, {0} +}; + +static void rt288x_wdt_reset(void) +{ + u32 t; + + /* enable WDT reset output on pin SRAM_CS_N */ + t = rt_sysc_r32(SYSC_REG_CLKCFG); + t |= CLKCFG_SRAM_CS_N_WDT; + rt_sysc_w32(t, SYSC_REG_CLKCFG); +} + +struct ralink_pinmux rt_gpio_pinmux = { + .mode = mode_mux, + .wdt_reset = rt288x_wdt_reset, +}; + +void __init ralink_clk_init(void) +{ + unsigned long cpu_rate; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + + switch (t) { + case SYSTEM_CONFIG_CPUCLK_250: + cpu_rate = 250000000; + break; + case SYSTEM_CONFIG_CPUCLK_266: + cpu_rate = 266666667; + break; + case SYSTEM_CONFIG_CPUCLK_280: + cpu_rate = 280000000; + break; + case SYSTEM_CONFIG_CPUCLK_300: + cpu_rate = 300000000; + break; + } + + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("300100.timer", cpu_rate / 2); + ralink_clk_add("300120.watchdog", cpu_rate / 2); + ralink_clk_add("300500.uart", cpu_rate / 2); + ralink_clk_add("300c00.uartlite", cpu_rate / 2); + ralink_clk_add("400000.ethernet", cpu_rate / 2); +} + +void __init ralink_of_remap(void) +{ + rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); + rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); + + if (!rt_sysc_membase || !rt_memc_membase) + panic("Failed to remap core resources"); +} + +void prom_soc_init(struct ralink_soc_info *soc_info) +{ + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); + const char *name; + u32 n0; + u32 n1; + u32 id; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); + id = __raw_readl(sysc + SYSC_REG_CHIP_ID); + + if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { + soc_info->compatible = "ralink,r2880-soc"; + name = "RT2880"; + } else { + panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); + } + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s id:%u rev:%u", + name, + (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, + (id & CHIP_ID_REV_MASK)); + + soc_info->mem_base = RT2880_SDRAM_BASE; + soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; + soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; +} |