1 files changed, 134 insertions, 0 deletions
diff --git a/arch/mips/pmcs-msp71xx/msp_irq_per.c b/arch/mips/pmcs-msp71xx/msp_irq_per.c
new file mode 100644
index 000000000000..d1fd530479d4
--- /dev/null
+++ b/arch/mips/pmcs-msp71xx/msp_irq_per.c
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c
+ *
+ * This file define the irq handler for MSP PER subsystem interrupts.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General	 Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+
+#include <asm/mipsregs.h>
+
+#include <msp_cic_int.h>
+#include <msp_regs.h>
+
+
+/*
+ * Convenience Macro.  Should be somewhere generic.
+ */
+#define get_current_vpe()	\
+	((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE)
+
+#ifdef CONFIG_SMP
+/*
+ * The PER registers must be protected from concurrent access.
+ */
+
+static DEFINE_SPINLOCK(per_lock);
+#endif
+
+/* ensure writes to per are completed */
+
+static inline void per_wmb(void)
+{
+	const volatile void __iomem *per_mem = PER_INT_MSK_REG;
+	volatile u32 dummy_read;
+
+	wmb();
+	dummy_read = __raw_readl(per_mem);
+	dummy_read++;
+}
+
+static inline void unmask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+	unsigned long flags;
+	spin_lock_irqsave(&per_lock, flags);
+	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+	spin_unlock_irqrestore(&per_lock, flags);
+#else
+	*PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE));
+#endif
+	per_wmb();
+}
+
+static inline void mask_per_irq(struct irq_data *d)
+{
+#ifdef CONFIG_SMP
+	unsigned long flags;
+	spin_lock_irqsave(&per_lock, flags);
+	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+	spin_unlock_irqrestore(&per_lock, flags);
+#else
+	*PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE));
+#endif
+	per_wmb();
+}
+
+static inline void msp_per_irq_ack(struct irq_data *d)
+{
+	mask_per_irq(d);
+	/*
+	 * In the PER interrupt controller, only bits 11 and 10
+	 * are write-to-clear, (SPI TX complete, SPI RX complete).
+	 * It does nothing for any others.
+	 */
+	*PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE));
+}
+
+#ifdef CONFIG_SMP
+static int msp_per_irq_set_affinity(struct irq_data *d,
+				    const struct cpumask *affinity, bool force)
+{
+	/* WTF is this doing ????? */
+	unmask_per_irq(d);
+	return 0;
+}
+#endif
+
+static struct irq_chip msp_per_irq_controller = {
+	.name = "MSP_PER",
+	.irq_enable = unmask_per_irq,
+	.irq_disable = mask_per_irq,
+	.irq_ack = msp_per_irq_ack,
+#ifdef CONFIG_SMP
+	.irq_set_affinity = msp_per_irq_set_affinity,
+#endif
+};
+
+void __init msp_per_irq_init(void)
+{
+	int i;
+	/* Mask/clear interrupts. */
+	*PER_INT_MSK_REG  = 0x00000000;
+	*PER_INT_STS_REG  = 0xFFFFFFFF;
+	/* initialize all the IRQ descriptors */
+	for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) {
+		irq_set_chip(i, &msp_per_irq_controller);
+#ifdef CONFIG_MIPS_MT_SMTC
+		irq_hwmask[i] = C_IRQ4;
+#endif
+	}
+}
+
+void msp_per_irq_dispatch(void)
+{
+	u32	per_mask = *PER_INT_MSK_REG;
+	u32	per_status = *PER_INT_STS_REG;
+	u32	pending;
+
+	pending = per_status & per_mask;
+	if (pending) {
+		do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1);
+	} else {
+		spurious_interrupt();
+	}
+}