diff options
Diffstat (limited to 'arch/mips/pci/fixup-cobalt.c')
| -rw-r--r-- | arch/mips/pci/fixup-cobalt.c | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 9553b14002dd..acacd1407c63 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -51,6 +51,67 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_early_fixup); +static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev, + struct resource *res) +{ + struct pci_controller *hose = (struct pci_controller *)dev->sysdata; + unsigned long offset = hose->io_offset; + struct resource orig = *res; + + if (!(res->flags & IORESOURCE_IO) || + !(res->flags & IORESOURCE_PCI_FIXED)) + return; + + res->start -= offset; + res->end -= offset; + dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n", + &orig, res); +} + +static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev) +{ + u32 class; + u8 progif; + + /* + * If the IDE controller is in legacy mode, pci_setup_device() fills in + * the resources with the legacy addresses that normally appear on the + * PCI bus, just as if we had read them from a BAR. + * + * However, with the GT-64111, those legacy addresses, e.g., 0x1f0, + * will never appear on the PCI bus because it converts memory accesses + * in the PCI I/O region (which is never at address zero) into I/O port + * accesses with no address translation. + * + * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store + * to physical address 0x100001f0 will become a PCI access to I/O port + * 0x100001f0. There's no way to generate an access to I/O port 0x1f0, + * but the VT82C586 IDE controller does respond at 0x100001f0 because + * it only decodes the low 24 bits of the address. + * + * When this quirk runs, the pci_dev resources should contain bus + * addresses, not Linux I/O port numbers, so convert legacy addresses + * like 0x1f0 to bus addresses like 0x100001f0. Later, we'll convert + * them back with pcibios_fixup_bus() or pcibios_bus_to_resource(). + */ + class = dev->class >> 8; + if (class != PCI_CLASS_STORAGE_IDE) + return; + + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 0) { + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]); + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]); + } + if ((progif & 4) == 0) { + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]); + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, + cobalt_legacy_ide_fixup); + static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; |