diff options
Diffstat (limited to 'arch/mips/mm/init.c')
| -rw-r--r-- | arch/mips/mm/init.c | 177 |
1 files changed, 114 insertions, 63 deletions
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 66d0f49c5bec..8770e619185e 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -44,6 +44,7 @@ #include <asm/pgalloc.h> #include <asm/tlb.h> #include <asm/fixmap.h> +#include <asm/maar.h> /* * We have up to 8 empty zeroed pages so we can map one of the right colour @@ -252,6 +253,119 @@ void __init fixrange_init(unsigned long start, unsigned long end, #endif } +unsigned __weak platform_maar_init(unsigned num_pairs) +{ + struct maar_config cfg[BOOT_MEM_MAP_MAX]; + unsigned i, num_configured, num_cfg = 0; + phys_addr_t skip; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + case BOOT_MEM_INIT_RAM: + break; + default: + continue; + } + + skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff); + + cfg[num_cfg].lower = boot_mem_map.map[i].addr; + cfg[num_cfg].lower += skip; + + cfg[num_cfg].upper = cfg[num_cfg].lower; + cfg[num_cfg].upper += boot_mem_map.map[i].size - 1; + cfg[num_cfg].upper -= skip; + + cfg[num_cfg].attrs = MIPS_MAAR_S; + num_cfg++; + } + + num_configured = maar_config(cfg, num_cfg, num_pairs); + if (num_configured < num_cfg) + pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n", + num_pairs, num_cfg); + + return num_configured; +} + +void maar_init(void) +{ + unsigned num_maars, used, i; + phys_addr_t lower, upper, attr; + static struct { + struct maar_config cfgs[3]; + unsigned used; + } recorded = { { { 0 } }, 0 }; + + if (!cpu_has_maar) + return; + + /* Detect the number of MAARs */ + write_c0_maari(~0); + back_to_back_c0_hazard(); + num_maars = read_c0_maari() + 1; + + /* MAARs should be in pairs */ + WARN_ON(num_maars % 2); + + /* Set MAARs using values we recorded already */ + if (recorded.used) { + used = maar_config(recorded.cfgs, recorded.used, num_maars / 2); + BUG_ON(used != recorded.used); + } else { + /* Configure the required MAARs */ + used = platform_maar_init(num_maars / 2); + } + + /* Disable any further MAARs */ + for (i = (used * 2); i < num_maars; i++) { + write_c0_maari(i); + back_to_back_c0_hazard(); + write_c0_maar(0); + back_to_back_c0_hazard(); + } + + if (recorded.used) + return; + + pr_info("MAAR configuration:\n"); + for (i = 0; i < num_maars; i += 2) { + write_c0_maari(i); + back_to_back_c0_hazard(); + upper = read_c0_maar(); + + write_c0_maari(i + 1); + back_to_back_c0_hazard(); + lower = read_c0_maar(); + + attr = lower & upper; + lower = (lower & MIPS_MAAR_ADDR) << 4; + upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff; + + pr_info(" [%d]: ", i / 2); + if (!(attr & MIPS_MAAR_V)) { + pr_cont("disabled\n"); + continue; + } + + pr_cont("%pa-%pa", &lower, &upper); + + if (attr & MIPS_MAAR_S) + pr_cont(" speculate"); + + pr_cont("\n"); + + /* Record the setup for use on secondary CPUs */ + if (used <= ARRAY_SIZE(recorded.cfgs)) { + recorded.cfgs[recorded.used].lower = lower; + recorded.cfgs[recorded.used].upper = upper; + recorded.cfgs[recorded.used].attrs = attr; + recorded.used++; + } + } +} + #ifndef CONFIG_NEED_MULTIPLE_NODES int page_is_ram(unsigned long pagenr) { @@ -334,69 +448,6 @@ static inline void mem_init_free_highmem(void) #endif } -unsigned __weak platform_maar_init(unsigned num_pairs) -{ - struct maar_config cfg[BOOT_MEM_MAP_MAX]; - unsigned i, num_configured, num_cfg = 0; - phys_addr_t skip; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - switch (boot_mem_map.map[i].type) { - case BOOT_MEM_RAM: - case BOOT_MEM_INIT_RAM: - break; - default: - continue; - } - - skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff); - - cfg[num_cfg].lower = boot_mem_map.map[i].addr; - cfg[num_cfg].lower += skip; - - cfg[num_cfg].upper = cfg[num_cfg].lower; - cfg[num_cfg].upper += boot_mem_map.map[i].size - 1; - cfg[num_cfg].upper -= skip; - - cfg[num_cfg].attrs = MIPS_MAAR_S; - num_cfg++; - } - - num_configured = maar_config(cfg, num_cfg, num_pairs); - if (num_configured < num_cfg) - pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n", - num_pairs, num_cfg); - - return num_configured; -} - -static void maar_init(void) -{ - unsigned num_maars, used, i; - - if (!cpu_has_maar) - return; - - /* Detect the number of MAARs */ - write_c0_maari(~0); - back_to_back_c0_hazard(); - num_maars = read_c0_maari() + 1; - - /* MAARs should be in pairs */ - WARN_ON(num_maars % 2); - - /* Configure the required MAARs */ - used = platform_maar_init(num_maars / 2); - - /* Disable any further MAARs */ - for (i = (used * 2); i < num_maars; i++) { - write_c0_maari(i); - back_to_back_c0_hazard(); - write_c0_maar(0); - back_to_back_c0_hazard(); - } -} - void __init mem_init(void) { #ifdef CONFIG_HIGHMEM |