diff options
Diffstat (limited to 'arch/mips/include/asm/mach-au1x00/gpio.h')
| -rw-r--r-- | arch/mips/include/asm/mach-au1x00/gpio.h | 86 |
1 files changed, 0 insertions, 86 deletions
diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h deleted file mode 100644 index 22e7ff17fc48..000000000000 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Alchemy GPIO support. - * - * With CONFIG_GPIOLIB=y different types of on-chip GPIO can be supported within - * the same kernel image. - * With CONFIG_GPIOLIB=n, your board must select ALCHEMY_GPIOINT_AU1XXX for the - * appropriate CPU type (AU1000 currently). - */ - -#ifndef _ALCHEMY_GPIO_H_ -#define _ALCHEMY_GPIO_H_ - -#include <asm/mach-au1x00/au1000.h> -#include <asm/mach-au1x00/gpio-au1000.h> -#include <asm/mach-au1x00/gpio-au1300.h> - -/* On Au1000, Au1500 and Au1100 GPIOs won't work as inputs before - * SYS_PININPUTEN is written to at least once. On Au1550/Au1200/Au1300 this - * register enables use of GPIOs as wake source. - */ -static inline void alchemy_gpio1_input_enable(void) -{ - void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_SYS_PHYS_ADDR); - __raw_writel(0, base + 0x110); /* the write op is key */ - wmb(); -} - - -/* Linux gpio framework integration. -* -* 4 use cases of Alchemy GPIOS: -*(1) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=y: -* Board must register gpiochips. -*(2) GPIOLIB=y, ALCHEMY_GPIO_INDIRECT=n: -* A gpiochip for the 75 GPIOs is registered. -* -*(3) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=y: -* the boards' gpio.h must provide the linux gpio wrapper functions, -* -*(4) GPIOLIB=n, ALCHEMY_GPIO_INDIRECT=n: -* inlinable gpio functions are provided which enable access to the -* Au1300 gpios only by using the numbers straight out of the data- -* sheets. - -* Cases 1 and 3 are intended for boards which want to provide their own -* GPIO namespace and -operations (i.e. for example you have 8 GPIOs -* which are in part provided by spare Au1300 GPIO pins and in part by -* an external FPGA but you still want them to be accssible in linux -* as gpio0-7. The board can of course use the alchemy_gpioX_* functions -* as required). -*/ - -#ifdef CONFIG_GPIOLIB - -/* wraps the cpu-dependent irq_to_gpio functions */ -/* FIXME: gpiolib needs an irq_to_gpio hook */ -static inline int __au_irq_to_gpio(unsigned int irq) -{ - switch (alchemy_get_cputype()) { - case ALCHEMY_CPU_AU1000...ALCHEMY_CPU_AU1200: - return alchemy_irq_to_gpio(irq); - case ALCHEMY_CPU_AU1300: - return au1300_irq_to_gpio(irq); - } - return -EINVAL; -} - - -/* using gpiolib to provide up to 2 gpio_chips for on-chip gpios */ -#ifndef CONFIG_ALCHEMY_GPIO_INDIRECT /* case (2) */ - -/* get everything through gpiolib */ -#define gpio_to_irq __gpio_to_irq -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define irq_to_gpio __au_irq_to_gpio - -#include <asm-generic/gpio.h> - -#endif /* !CONFIG_ALCHEMY_GPIO_INDIRECT */ - - -#endif /* CONFIG_GPIOLIB */ - -#endif /* _ALCHEMY_GPIO_H_ */ |