diff options
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-helper-board.c')
| -rw-r--r-- | arch/mips/cavium-octeon/executive/cvmx-helper-board.c | 711 |
1 files changed, 711 insertions, 0 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c new file mode 100644 index 000000000000..fd2015331a20 --- /dev/null +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -0,0 +1,711 @@ +/***********************license start*************** + * Author: Cavium Networks + * + * Contact: support@caviumnetworks.com + * This file is part of the OCTEON SDK + * + * Copyright (c) 2003-2008 Cavium Networks + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, Version 2, as + * published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful, but + * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or + * NONINFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this file; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * or visit http://www.gnu.org/licenses/. + * + * This file may also be available under a different license from Cavium. + * Contact Cavium Networks for more information + ***********************license end**************************************/ + +/* + * + * Helper functions to abstract board specific data about + * network ports from the rest of the cvmx-helper files. + */ + +#include <asm/octeon/octeon.h> +#include <asm/octeon/cvmx-bootinfo.h> + +#include <asm/octeon/cvmx-config.h> + +#include <asm/octeon/cvmx-mdio.h> + +#include <asm/octeon/cvmx-helper.h> +#include <asm/octeon/cvmx-helper-util.h> +#include <asm/octeon/cvmx-helper-board.h> + +#include <asm/octeon/cvmx-gmxx-defs.h> +#include <asm/octeon/cvmx-asxx-defs.h> + +/** + * cvmx_override_board_link_get(int ipd_port) is a function + * pointer. It is meant to allow customization of the process of + * talking to a PHY to determine link speed. It is called every + * time a PHY must be polled for link status. Users should set + * this pointer to a function before calling any cvmx-helper + * operations. + */ +cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port) = + NULL; + +/** + * Return the MII PHY address associated with the given IPD + * port. A result of -1 means there isn't a MII capable PHY + * connected to this port. On chips supporting multiple MII + * busses the bus number is encoded in bits <15:8>. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It replies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: Octeon IPD port to get the MII address for. + * + * Returns MII PHY address and bus number or -1. + */ +int cvmx_helper_board_get_mii_address(int ipd_port) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_SIM: + /* Simulator doesn't have MII */ + return -1; + case CVMX_BOARD_TYPE_EBT3000: + case CVMX_BOARD_TYPE_EBT5800: + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_NICPRO2: + /* Interface 0 is SPI4, interface 1 is RGMII */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16; + else + return -1; + case CVMX_BOARD_TYPE_KODAMA: + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_HIKARI: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* + * Port 0 is WAN connected to a PHY, Port 1 is GMII + * connected to a switch + */ + if (ipd_port == 0) + return 4; + else if (ipd_port == 1) + return 9; + else + return -1; + case CVMX_BOARD_TYPE_NAC38: + /* Board has 8 RGMII ports PHYs are 0-7 */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port; + else if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 4; + else + return -1; + case CVMX_BOARD_TYPE_EBH3000: + /* Board has dual SPI4 and no PHYs */ + return -1; + case CVMX_BOARD_TYPE_EBH5200: + case CVMX_BOARD_TYPE_EBH5201: + case CVMX_BOARD_TYPE_EBT5200: + /* Board has 2 management ports */ + if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && + (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2))) + return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT; + /* + * Board has 4 SGMII ports. The PHYs start right after the MII + * ports MII0 = 0, MII1 = 1, SGMII = 2-5. + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 2; + else + return -1; + case CVMX_BOARD_TYPE_EBH5600: + case CVMX_BOARD_TYPE_EBH5601: + case CVMX_BOARD_TYPE_EBH5610: + /* Board has 1 management port */ + if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT) + return 0; + /* + * Board has 8 SGMII ports. 4 connect out, two connect + * to a switch, and 2 loop to each other + */ + if ((ipd_port >= 0) && (ipd_port < 4)) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_CUST_NB5: + if (ipd_port == 2) + return 4; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + /* Board has 4 SGMII ports. connected QLM3(interface 1) */ + if ((ipd_port >= 16) && (ipd_port < 20)) + return ipd_port - 16 + 1; + else + return -1; + case CVMX_BOARD_TYPE_NIC_XLE_10G: + case CVMX_BOARD_TYPE_NIC10E: + return -1; + case CVMX_BOARD_TYPE_NIC4E: + if (ipd_port >= 0 && ipd_port <= 3) + return (ipd_port + 0x1f) & 0x1f; + else + return -1; + case CVMX_BOARD_TYPE_NIC2E: + if (ipd_port >= 0 && ipd_port <= 1) + return ipd_port + 1; + else + return -1; + case CVMX_BOARD_TYPE_BBGW_REF: + /* + * No PHYs are connected to Octeon, everything is + * through switch. + */ + return -1; + + case CVMX_BOARD_TYPE_CUST_WSX16: + if (ipd_port >= 0 && ipd_port <= 3) + return ipd_port; + else if (ipd_port >= 16 && ipd_port <= 19) + return ipd_port - 16 + 4; + else + return -1; + } + + /* Some unknown board. Somebody forgot to update this function... */ + cvmx_dprintf + ("cvmx_helper_board_get_mii_address: Unknown board type %d\n", + cvmx_sysinfo_get()->board_type); + return -1; +} + +/** + * This function is the board specific method of determining an + * ethernet ports link speed. Most Octeon boards have Marvell PHYs + * and are handled by the fall through case. This function must be + * updated for boards that don't have the normal Marvell PHYs. + * + * This function must be modified for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relies on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @ipd_port: IPD input port associated with the port we want to get link + * status for. + * + * Returns The ports link status. If the link isn't fully resolved, this must + * return zero. + */ +cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) +{ + cvmx_helper_link_info_t result; + int phy_addr; + int is_broadcom_phy = 0; + + /* Give the user a chance to override the processing of this function */ + if (cvmx_override_board_link_get) + return cvmx_override_board_link_get(ipd_port); + + /* Unless we fix it later, all links are defaulted to down */ + result.u64 = 0; + + /* + * This switch statement should handle all ports that either don't use + * Marvell PHYS, or don't support in-band status. + */ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_SIM: + /* The simulator gives you a simulated 1Gbps full duplex link */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + case CVMX_BOARD_TYPE_EBH3100: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + /* Fall through to the generic code below */ + break; + case CVMX_BOARD_TYPE_CUST_NB5: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 1) { + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } else /* The other port uses a broadcom PHY */ + is_broadcom_phy = 1; + break; + case CVMX_BOARD_TYPE_BBGW_REF: + /* Port 1 on these boards is always Gigabit */ + if (ipd_port == 2) { + /* Port 2 is not hooked up */ + result.u64 = 0; + return result; + } else { + /* Ports 0 and 1 connect to the switch */ + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + return result; + } + break; + } + + phy_addr = cvmx_helper_board_get_mii_address(ipd_port); + if (phy_addr != -1) { + if (is_broadcom_phy) { + /* + * Below we are going to read SMI/MDIO + * register 0x19 which works on Broadcom + * parts + */ + int phy_status = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + 0x19); + switch ((phy_status >> 8) & 0x7) { + case 0: + result.u64 = 0; + break; + case 1: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 10; + break; + case 2: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 10; + break; + case 3: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 100; + break; + case 4: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 100; + break; + case 5: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 100; + break; + case 6: + result.s.link_up = 1; + result.s.full_duplex = 0; + result.s.speed = 1000; + break; + case 7: + result.s.link_up = 1; + result.s.full_duplex = 1; + result.s.speed = 1000; + break; + } + } else { + /* + * This code assumes we are using a Marvell + * Gigabit PHY. All the speed information can + * be read from register 17 in one + * go. Somebody using a different PHY will + * need to handle it above in the board + * specific area. + */ + int phy_status = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17); + + /* + * If the resolve bit 11 isn't set, see if + * autoneg is turned off (bit 12, reg 0). The + * resolve bit doesn't get set properly when + * autoneg is off, so force it. + */ + if ((phy_status & (1 << 11)) == 0) { + int auto_status = + cvmx_mdio_read(phy_addr >> 8, + phy_addr & 0xff, 0); + if ((auto_status & (1 << 12)) == 0) + phy_status |= 1 << 11; + } + + /* + * Only return a link if the PHY has finished + * auto negotiation and set the resolved bit + * (bit 11) + */ + if (phy_status & (1 << 11)) { + result.s.link_up = 1; + result.s.full_duplex = ((phy_status >> 13) & 1); + switch ((phy_status >> 14) & 3) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.u64 = 0; + break; + } + } + } + } else if (OCTEON_IS_MODEL(OCTEON_CN3XXX) + || OCTEON_IS_MODEL(OCTEON_CN58XX) + || OCTEON_IS_MODEL(OCTEON_CN50XX)) { + /* + * We don't have a PHY address, so attempt to use + * in-band status. It is really important that boards + * not supporting in-band status never get + * here. Reading broken in-band status tends to do bad + * things + */ + union cvmx_gmxx_rxx_rx_inbnd inband_status; + int interface = cvmx_helper_get_interface_num(ipd_port); + int index = cvmx_helper_get_interface_index_num(ipd_port); + inband_status.u64 = + cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface)); + + result.s.link_up = inband_status.s.status; + result.s.full_duplex = inband_status.s.duplex; + switch (inband_status.s.speed) { + case 0: /* 10 Mbps */ + result.s.speed = 10; + break; + case 1: /* 100 Mbps */ + result.s.speed = 100; + break; + case 2: /* 1 Gbps */ + result.s.speed = 1000; + break; + case 3: /* Illegal */ + result.u64 = 0; + break; + } + } else { + /* + * We don't have a PHY address and we don't have + * in-band status. There is no way to determine the + * link speed. Return down assuming this port isn't + * wired + */ + result.u64 = 0; + } + + /* If link is down, return all fields as zero. */ + if (!result.s.link_up) + result.u64 = 0; + + return result; +} + +/** + * This function as a board specific method of changing the PHY + * speed, duplex, and auto-negotiation. This programs the PHY and + * not Octeon. This can be used to force Octeon's links to + * specific settings. + * + * @phy_addr: The address of the PHY to program + * @enable_autoneg: + * Non zero if you want to enable auto-negotiation. + * @link_info: Link speed to program. If the speed is zero and auto-negotiation + * is enabled, all possible negotiation speeds are advertised. + * + * Returns Zero on success, negative on failure + */ +int cvmx_helper_board_link_set_phy(int phy_addr, + cvmx_helper_board_set_phy_link_flags_types_t + link_flags, + cvmx_helper_link_info_t link_info) +{ + + /* Set the flow control settings based on link_flags */ + if ((link_flags & set_phy_link_flags_flow_control_mask) != + set_phy_link_flags_flow_control_dont_touch) { + cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; + reg_autoneg_adver.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER); + reg_autoneg_adver.s.asymmetric_pause = + (link_flags & set_phy_link_flags_flow_control_mask) == + set_phy_link_flags_flow_control_enable; + reg_autoneg_adver.s.pause = + (link_flags & set_phy_link_flags_flow_control_mask) == + set_phy_link_flags_flow_control_enable; + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER, + reg_autoneg_adver.u16); + } + + /* If speed isn't set and autoneg is on advertise all supported modes */ + if ((link_flags & set_phy_link_flags_autoneg) + && (link_info.s.speed == 0)) { + cvmx_mdio_phy_reg_control_t reg_control; + cvmx_mdio_phy_reg_status_t reg_status; + cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; + cvmx_mdio_phy_reg_extended_status_t reg_extended_status; + cvmx_mdio_phy_reg_control_1000_t reg_control_1000; + + reg_status.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_STATUS); + reg_autoneg_adver.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER); + reg_autoneg_adver.s.advert_100base_t4 = + reg_status.s.capable_100base_t4; + reg_autoneg_adver.s.advert_10base_tx_full = + reg_status.s.capable_10_full; + reg_autoneg_adver.s.advert_10base_tx_half = + reg_status.s.capable_10_half; + reg_autoneg_adver.s.advert_100base_tx_full = + reg_status.s.capable_100base_x_full; + reg_autoneg_adver.s.advert_100base_tx_half = + reg_status.s.capable_100base_x_half; + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER, + reg_autoneg_adver.u16); + if (reg_status.s.capable_extended_status) { + reg_extended_status.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_EXTENDED_STATUS); + reg_control_1000.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL_1000); + reg_control_1000.s.advert_1000base_t_full = + reg_extended_status.s.capable_1000base_t_full; + reg_control_1000.s.advert_1000base_t_half = + reg_extended_status.s.capable_1000base_t_half; + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL_1000, + reg_control_1000.u16); + } + reg_control.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL); + reg_control.s.autoneg_enable = 1; + reg_control.s.restart_autoneg = 1; + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); + } else if ((link_flags & set_phy_link_flags_autoneg)) { + cvmx_mdio_phy_reg_control_t reg_control; + cvmx_mdio_phy_reg_status_t reg_status; + cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver; + cvmx_mdio_phy_reg_control_1000_t reg_control_1000; + + reg_status.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_STATUS); + reg_autoneg_adver.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER); + reg_autoneg_adver.s.advert_100base_t4 = 0; + reg_autoneg_adver.s.advert_10base_tx_full = 0; + reg_autoneg_adver.s.advert_10base_tx_half = 0; + reg_autoneg_adver.s.advert_100base_tx_full = 0; + reg_autoneg_adver.s.advert_100base_tx_half = 0; + if (reg_status.s.capable_extended_status) { + reg_control_1000.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL_1000); + reg_control_1000.s.advert_1000base_t_full = 0; + reg_control_1000.s.advert_1000base_t_half = 0; + } + switch (link_info.s.speed) { + case 10: + reg_autoneg_adver.s.advert_10base_tx_full = + link_info.s.full_duplex; + reg_autoneg_adver.s.advert_10base_tx_half = + !link_info.s.full_duplex; + break; + case 100: + reg_autoneg_adver.s.advert_100base_tx_full = + link_info.s.full_duplex; + reg_autoneg_adver.s.advert_100base_tx_half = + !link_info.s.full_duplex; + break; + case 1000: + reg_control_1000.s.advert_1000base_t_full = + link_info.s.full_duplex; + reg_control_1000.s.advert_1000base_t_half = + !link_info.s.full_duplex; + break; + } + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_AUTONEG_ADVER, + reg_autoneg_adver.u16); + if (reg_status.s.capable_extended_status) + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL_1000, + reg_control_1000.u16); + reg_control.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL); + reg_control.s.autoneg_enable = 1; + reg_control.s.restart_autoneg = 1; + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); + } else { + cvmx_mdio_phy_reg_control_t reg_control; + reg_control.u16 = + cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL); + reg_control.s.autoneg_enable = 0; + reg_control.s.restart_autoneg = 1; + reg_control.s.duplex = link_info.s.full_duplex; + if (link_info.s.speed == 1000) { + reg_control.s.speed_msb = 1; + reg_control.s.speed_lsb = 0; + } else if (link_info.s.speed == 100) { + reg_control.s.speed_msb = 0; + reg_control.s.speed_lsb = 1; + } else if (link_info.s.speed == 10) { + reg_control.s.speed_msb = 0; + reg_control.s.speed_lsb = 0; + } + cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, + CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16); + } + return 0; +} + +/** + * This function is called by cvmx_helper_interface_probe() after it + * determines the number of ports Octeon can support on a specific + * interface. This function is the per board location to override + * this value. It is called with the number of ports Octeon might + * support and should return the number of actual ports on the + * board. + * + * This function must be modifed for every new Octeon board. + * Internally it uses switch statements based on the cvmx_sysinfo + * data to determine board types and revisions. It relys on the + * fact that every Octeon board receives a unique board type + * enumeration from the bootloader. + * + * @interface: Interface to probe + * @supported_ports: + * Number of ports Octeon supports. + * + * Returns Number of ports the actual board supports. Many times this will + * simple be "support_ports". + */ +int __cvmx_helper_board_interface_probe(int interface, int supported_ports) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_BBGW_REF: + if (interface == 0) + return 2; + break; + case CVMX_BOARD_TYPE_NIC_XLE_4G: + if (interface == 0) + return 0; + break; + /* The 2nd interface on the EBH5600 is connected to the Marvel switch, + which we don't support. Disable ports connected to it */ + case CVMX_BOARD_TYPE_EBH5600: + if (interface == 1) + return 0; + break; + } + return supported_ports; +} + +/** + * Enable packet input/output from the hardware. This function is + * called after by cvmx_helper_packet_hardware_enable() to + * perform board specific initialization. For most boards + * nothing is needed. + * + * @interface: Interface to enable + * + * Returns Zero on success, negative on failure + */ +int __cvmx_helper_board_hardware_enable(int interface) +{ + if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { + if (interface == 0) { + /* Different config for switch port */ + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); + /* + * Boards with gigabit WAN ports need a + * different setting that is compatible with + * 100 Mbit settings + */ + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), + 0xc); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), + 0xc); + } + } else if (cvmx_sysinfo_get()->board_type == + CVMX_BOARD_TYPE_CN3010_EVB_HS5) { + /* + * Broadcom PHYs require differnet ASX + * clocks. Unfortunately many boards don't define a + * new board Id and simply mangle the + * CN3010_EVB_HS5 + */ + if (interface == 0) { + /* + * Some boards use a hacked up bootloader that + * identifies them as CN3010_EVB_HS5 + * evaluation boards. This leads to all kinds + * of configuration problems. Detect one + * case, and print warning, while trying to do + * the right thing. + */ + int phy_addr = cvmx_helper_board_get_mii_address(0); + if (phy_addr != -1) { + int phy_identifier = + cvmx_mdio_read(phy_addr >> 8, + phy_addr & 0xff, 0x2); + /* Is it a Broadcom PHY? */ + if (phy_identifier == 0x0143) { + cvmx_dprintf("\n"); + cvmx_dprintf("ERROR:\n"); + cvmx_dprintf + ("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n"); + cvmx_dprintf + ("ERROR: The board type is mis-configured, and software malfunctions are likely.\n"); + cvmx_dprintf + ("ERROR: All boards require a unique board type to identify them.\n"); + cvmx_dprintf("ERROR:\n"); + cvmx_dprintf("\n"); + cvmx_wait(1000000000); + cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX + (0, interface), 5); + cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX + (0, interface), 5); + } + } + } + } + return 0; +} |