diff options
Diffstat (limited to 'arch/mips/Makefile')
| -rw-r--r-- | arch/mips/Makefile | 55 |
1 files changed, 37 insertions, 18 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2563a088d3b8..8f57fc72d62c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -122,26 +122,8 @@ predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) -# For smartmips configurations, there are hundreds of warnings due to ISA overrides -# in assembly and header files. smartmips is only supported for MIPS32r1 onwards -# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or -# similar directives in the kernel will spam the build logs with the following warnings: -# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater -# or -# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension -# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has -# been fixed properly. -cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,-msmartmips) -Wa,--no-warn -cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,-mmicromips) - cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer - -ifeq ($(CONFIG_CPU_HAS_MSA),y) -toolchain-msa := $(call cc-option-yn,-mhard-float -mfp64 -Wa$(comma)-mmsa) -cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA -endif - # # CPU-dependent compiler/assembler options for optimization. # @@ -156,10 +138,12 @@ cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS -Wa,-mips32 -Wa,--trap cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ -Wa,-mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64 -Wa,--trap cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ -Wa,-mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ -Wa,--trap @@ -182,6 +166,16 @@ cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon endif cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap +# +# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a +# as MIPS64 R1; older versions as just R1. This leaves the possibility open +# that GCC might generate R2 code for -march=loongson3a which then is rejected +# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a +# can't easily be used safely within the kbuild framework. +# +cflags-$(CONFIG_CPU_LOONGSON3) += \ + $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ + -Wa,-mips64r2 -Wa,--trap cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) @@ -194,6 +188,23 @@ KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds endif endif +# For smartmips configurations, there are hundreds of warnings due to ISA overrides +# in assembly and header files. smartmips is only supported for MIPS32r1 onwards +# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or +# similar directives in the kernel will spam the build logs with the following warnings: +# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater +# or +# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension +# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has +# been fixed properly. +mips-cflags := "$(cflags-y)" +cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,$(mips-cflags),-msmartmips) -Wa,--no-warn +cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,$(mips-cflags),-mmicromips) +ifeq ($(CONFIG_CPU_HAS_MSA),y) +toolchain-msa := $(call cc-option-yn,-$(mips-cflags),mhard-float -mfp64 -Wa$(comma)-mmsa) +cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA +endif + # # Firmware support # @@ -287,7 +298,11 @@ boot-y += vmlinux.ecoff boot-y += vmlinux.srec ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0) boot-y += uImage +boot-y += uImage.bin +boot-y += uImage.bz2 boot-y += uImage.gz +boot-y += uImage.lzma +boot-y += uImage.lzo endif # compressed boot image targets (arch/mips/boot/compressed/) @@ -386,7 +401,11 @@ define archhelp echo ' vmlinuz.bin - Raw binary zboot image' echo ' vmlinuz.srec - SREC zboot image' echo ' uImage - U-Boot image' + echo ' uImage.bin - U-Boot image (uncompressed)' + echo ' uImage.bz2 - U-Boot image (bz2)' echo ' uImage.gz - U-Boot image (gzip)' + echo ' uImage.lzma - U-Boot image (lzma)' + echo ' uImage.lzo - U-Boot image (lzo)' echo ' dtbs - Device-tree blobs for enabled boards' echo echo ' These will be default as appropriate for a configured platform.' |