summaryrefslogtreecommitdiffstats
path: root/arch/microblaze
diff options
context:
space:
mode:
Diffstat (limited to 'arch/microblaze')
-rw-r--r--arch/microblaze/Kconfig9
-rw-r--r--arch/microblaze/boot/dts/Makefile2
-rw-r--r--arch/microblaze/include/asm/Kbuild1
-rw-r--r--arch/microblaze/include/asm/pci.h2
-rw-r--r--arch/microblaze/include/asm/pgalloc.h12
-rw-r--r--arch/microblaze/include/asm/prom.h39
-rw-r--r--arch/microblaze/kernel/head.S2
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S4
-rw-r--r--arch/microblaze/kernel/prom.c32
-rw-r--r--arch/microblaze/kernel/setup.c3
-rw-r--r--arch/microblaze/kernel/sys_microblaze.c17
-rw-r--r--arch/microblaze/kernel/syscall_table.S2
-rw-r--r--arch/microblaze/kernel/timer.c3
-rw-r--r--arch/microblaze/mm/consistent.c7
-rw-r--r--arch/microblaze/pci/pci-common.c73
15 files changed, 41 insertions, 167 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 8370114e78aa..e23cccde9c27 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -83,11 +83,6 @@ config MMU
bool "MMU support"
default n
-config NO_MMU
- bool
- depends on !MMU
- default y
-
comment "Boot options"
config CMDLINE_BOOL
@@ -251,10 +246,6 @@ config MICROBLAZE_64K_PAGES
endchoice
-config KERNEL_PAD
- hex "Kernel PAD for unpacking" if ADVANCED_OPTIONS
- default "0x80000" if MMU
-
endmenu
source "mm/Kconfig"
diff --git a/arch/microblaze/boot/dts/Makefile b/arch/microblaze/boot/dts/Makefile
index c3b3a5d67b89..c4982d16e555 100644
--- a/arch/microblaze/boot/dts/Makefile
+++ b/arch/microblaze/boot/dts/Makefile
@@ -1,6 +1,4 @@
#
-# arch/microblaze/boot/Makefile
-#
obj-y += linked_dtb.o
diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild
index d3c51a6a601d..ce0bbf8f5640 100644
--- a/arch/microblaze/include/asm/Kbuild
+++ b/arch/microblaze/include/asm/Kbuild
@@ -3,3 +3,4 @@ generic-y += clkdev.h
generic-y += exec.h
generic-y += trace_clock.h
generic-y += syscalls.h
+generic-y += preempt.h
diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h
index d52abb6812fa..935f9bec414a 100644
--- a/arch/microblaze/include/asm/pci.h
+++ b/arch/microblaze/include/asm/pci.h
@@ -127,8 +127,6 @@ extern void of_scan_pci_bridge(struct device_node *node,
extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
-extern int pci_read_irq_line(struct pci_dev *dev);
-
extern int pci_bus_find_capability(struct pci_bus *bus,
unsigned int devfn, int cap);
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index ebd35792482c..7fdf7fabc7d7 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -122,8 +122,13 @@ static inline struct page *pte_alloc_one(struct mm_struct *mm,
#endif
ptepage = alloc_pages(flags, 0);
- if (ptepage)
- clear_highpage(ptepage);
+ if (!ptepage)
+ return NULL;
+ clear_highpage(ptepage);
+ if (!pgtable_page_ctor(ptepage)) {
+ __free_page(ptepage);
+ return NULL;
+ }
return ptepage;
}
@@ -158,8 +163,9 @@ extern inline void pte_free_slow(struct page *ptepage)
__free_page(ptepage);
}
-extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
+static inline void pte_free(struct mm_struct *mm, struct page *ptepage)
{
+ pgtable_page_dtor(ptepage);
__free_page(ptepage);
}
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 9977816c5ad3..2f03ac815851 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -11,19 +11,10 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
-
-#include <linux/of.h> /* linux/of.h gets to determine #include ordering */
-
#ifndef _ASM_MICROBLAZE_PROM_H
#define _ASM_MICROBLAZE_PROM_H
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-#include <asm/irq.h>
-#include <linux/atomic.h>
-#define HAVE_ARCH_DEVTREE_FIXUPS
+#include <linux/of.h>
/* Other Prototypes */
enum early_consoles {
@@ -33,32 +24,4 @@ enum early_consoles {
extern int of_early_console(void *version);
-/*
- * OF address retreival & translation
- */
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#define pci_address_to_pio pci_address_to_pio
-#endif /* CONFIG_PCI */
-
-/* Parse the ibm,dma-window property of an OF node into the busno, phys and
- * size parameters.
- */
-void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
- unsigned long *busno, unsigned long *phys, unsigned long *size);
-
-extern void kdump_move_device_tree(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-/* These includes are put at the bottom because they may contain things
- * that are overridden by this file. Ideally they shouldn't be included
- * by this file, but there are a bunch of .c files that currently depend
- * on it. Eventually they will be cleaned up. */
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/platform_device.h>
-
#endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index fcc797feb9db..817b7eec95b6 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -176,7 +176,7 @@ _invalidate:
/* start to do TLB calculation */
addik r12, r0, _end
rsub r12, r3, r12
- addik r12, r12, CONFIG_KERNEL_PAD /* that's the pad */
+ addik r12, r12, CONFIG_LOWMEM_SIZE >> PTE_SHIFT /* that's the pad */
or r9, r0, r0 /* TLB0 = 0 */
or r10, r0, r0 /* TLB1 = 0 */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 61b3a1fed46f..fc6b89f4dd31 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -193,8 +193,8 @@
* - W S REG EXC
*
*
- * STACK FRAME STRUCTURE (for NO_MMU)
- * ---------------------------------
+ * STACK FRAME STRUCTURE (for CONFIG_MMU=n)
+ * ----------------------------------------
*
* +-------------+ + 0
* | MSR |
diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c
index 0c4453f134cb..abdfb10e7eca 100644
--- a/arch/microblaze/kernel/prom.c
+++ b/arch/microblaze/kernel/prom.c
@@ -30,6 +30,7 @@
#include <linux/debugfs.h>
#include <linux/irq.h>
#include <linux/memblock.h>
+#include <linux/of_fdt.h>
#include <asm/prom.h>
#include <asm/page.h>
@@ -41,11 +42,6 @@
#include <asm/sections.h>
#include <asm/pci-bridge.h>
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
- memblock_add(base, size);
-}
-
#ifdef CONFIG_EARLY_PRINTK
static char *stdout;
@@ -106,21 +102,10 @@ void __init early_init_devtree(void *params)
{
pr_debug(" -> early_init_devtree(%p)\n", params);
- /* Setup flat device-tree pointer */
- initial_boot_params = params;
-
- /* Retrieve various informations from the /chosen node of the
- * device-tree, including the platform type, initrd location and
- * size, TCE reserve, and more ...
- */
- of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line);
-
- /* Scan memory nodes and rebuild MEMBLOCKs */
- of_scan_flat_dt(early_init_dt_scan_root, NULL);
- of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+ early_init_dt_scan(params);
+ if (!strlen(boot_command_line))
+ strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
- /* Save command line for /proc/cmdline and then parse parameters */
- strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
parse_early_param();
memblock_allow_resize();
@@ -130,15 +115,6 @@ void __init early_init_devtree(void *params)
pr_debug(" <- early_init_devtree()\n");
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init early_init_dt_setup_initrd_arch(u64 start, u64 end)
-{
- initrd_start = (unsigned long)__va(start);
- initrd_end = (unsigned long)__va(end);
- initrd_below_start_ok = 1;
-}
-#endif
-
/*******
*
* New implementation of the OF "find" APIs, return a refcounted
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 0775e036c526..8de8ebc309f1 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -16,6 +16,7 @@
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/debugfs.h>
+#include <linux/of_fdt.h>
#include <asm/setup.h>
#include <asm/sections.h>
@@ -50,7 +51,7 @@ char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data")));
void __init setup_arch(char **cmdline_p)
{
- *cmdline_p = cmd_line;
+ *cmdline_p = boot_command_line;
console_verbose();
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index f905b3ae68c7..f1e1f666ddde 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -33,12 +33,23 @@
#include <linux/slab.h>
#include <asm/syscalls.h>
-asmlinkage long sys_mmap(unsigned long addr, unsigned long len,
- unsigned long prot, unsigned long flags,
- unsigned long fd, off_t pgoff)
+SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ off_t, pgoff)
{
if (pgoff & ~PAGE_MASK)
return -EINVAL;
return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff >> PAGE_SHIFT);
}
+
+SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
+ unsigned long, prot, unsigned long, flags, unsigned long, fd,
+ unsigned long, pgoff)
+{
+ if (pgoff & (~PAGE_MASK >> 12))
+ return -EINVAL;
+
+ return sys_mmap_pgoff(addr, len, prot, flags, fd,
+ pgoff >> (PAGE_SHIFT - 12));
+}
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 4fca56cf02f6..b882ad50535b 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -192,7 +192,7 @@ ENTRY(sys_call_table)
.long sys_ni_syscall /* reserved for streams2 */
.long sys_vfork /* 190 */
.long sys_getrlimit
- .long sys_mmap_pgoff /* mmap2 */
+ .long sys_mmap2
.long sys_truncate64
.long sys_ftruncate64
.long sys_stat64 /* 195 */
diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c
index e4b3f33ef34c..3e39b1082fdf 100644
--- a/arch/microblaze/kernel/timer.c
+++ b/arch/microblaze/kernel/timer.c
@@ -15,6 +15,7 @@
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/cpuinfo.h>
#include <linux/cnt32_to_63.h>
@@ -148,7 +149,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
static struct irqaction timer_irqaction = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_TIMER,
+ .flags = IRQF_TIMER,
.name = "timer",
.dev_id = &clockevent_xilinx_timer,
};
diff --git a/arch/microblaze/mm/consistent.c b/arch/microblaze/mm/consistent.c
index 5226b09cbbb2..dbbf2246a260 100644
--- a/arch/microblaze/mm/consistent.c
+++ b/arch/microblaze/mm/consistent.c
@@ -176,8 +176,7 @@ void consistent_free(size_t size, void *vaddr)
page = virt_to_page(vaddr);
do {
- ClearPageReserved(page);
- __free_page(page);
+ __free_reserved_page(page);
page++;
} while (size -= PAGE_SIZE);
#else
@@ -194,9 +193,7 @@ void consistent_free(size_t size, void *vaddr)
pte_clear(&init_mm, (unsigned int)vaddr, ptep);
if (pfn_valid(pfn)) {
page = pfn_to_page(pfn);
-
- ClearPageReserved(page);
- __free_page(page);
+ __free_reserved_page(page);
}
}
vaddr += PAGE_SIZE;
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 1b93bf0892a0..66804adcacf0 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -29,6 +29,7 @@
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_pci.h>
#include <linux/export.h>
@@ -193,76 +194,6 @@ void pcibios_set_master(struct pci_dev *dev)
}
/*
- * Reads the interrupt pin to determine if interrupt is use by card.
- * If the interrupt is used, then gets the interrupt line from the
- * openfirmware and sets it in the pci_dev and pci_config line.
- */
-int pci_read_irq_line(struct pci_dev *pci_dev)
-{
- struct of_irq oirq;
- unsigned int virq;
-
- /* The current device-tree that iSeries generates from the HV
- * PCI informations doesn't contain proper interrupt routing,
- * and all the fallback would do is print out crap, so we
- * don't attempt to resolve the interrupts here at all, some
- * iSeries specific fixup does it.
- *
- * In the long run, we will hopefully fix the generated device-tree
- * instead.
- */
- pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
-
-#ifdef DEBUG
- memset(&oirq, 0xff, sizeof(oirq));
-#endif
- /* Try to get a mapping from the device-tree */
- if (of_irq_map_pci(pci_dev, &oirq)) {
- u8 line, pin;
-
- /* If that fails, lets fallback to what is in the config
- * space and map that through the default controller. We
- * also set the type to level low since that's what PCI
- * interrupts are. If your platform does differently, then
- * either provide a proper interrupt tree or don't use this
- * function.
- */
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
- return -1;
- if (pin == 0)
- return -1;
- if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
- line == 0xff || line == 0) {
- return -1;
- }
- pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
- line, pin);
-
- virq = irq_create_mapping(NULL, line);
- if (virq)
- irq_set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
- } else {
- pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.specifier[1],
- of_node_full_name(oirq.controller));
-
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
- }
- if (!virq) {
- pr_debug(" Failed to map !\n");
- return -1;
- }
-
- pr_debug(" Mapped to linux irq %d\n", virq);
-
- pci_dev->irq = virq;
-
- return 0;
-}
-EXPORT_SYMBOL(pci_read_irq_line);
-
-/*
* Platform support for /proc/bus/pci/X/Y mmap()s,
* modelled on the sparc64 implementation by Dave Miller.
* -- paulus.
@@ -960,7 +891,7 @@ void pcibios_setup_bus_devices(struct pci_bus *bus)
dev->dev.archdata.dma_data = (void *)PCI_DRAM_OFFSET;
/* Read default IRQs and fixup if necessary */
- pci_read_irq_line(dev);
+ dev->irq = of_irq_parse_and_map_pci(dev, 0, 0);
}
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 21:04:21 +0000