summaryrefslogtreecommitdiffstats
path: root/arch/microblaze/kernel/hw_exception_handler.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/microblaze/kernel/hw_exception_handler.S')
-rw-r--r--arch/microblaze/kernel/hw_exception_handler.S48
1 files changed, 32 insertions, 16 deletions
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 782680de3121..56572e923a83 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -77,6 +77,8 @@
#include <asm/signal.h>
#include <asm/asm-offsets.h>
+#undef DEBUG
+
/* Helpful Macros */
#define NUM_TO_REG(num) r ## num
@@ -91,7 +93,7 @@
lwi r6, r1, PT_R6; \
lwi r11, r1, PT_R11; \
lwi r31, r1, PT_R31; \
- lwi r1, r0, TOPHYS(r0_ram + 0);
+ lwi r1, r1, PT_R1;
#endif /* CONFIG_MMU */
#define LWREG_NOP \
@@ -206,8 +208,8 @@
* | . |
* | . |
*
- * NO_MMU kernel use the same r0_ram pointed space - look to vmlinux.lds.S
- * which is used for storing register values - old style was, that value were
+ * MMU kernel uses the same 'pt_pool_space' pointed space
+ * which is used for storing register values - noMMu style was, that values were
* stored in stack but in case of failure you lost information about register.
* Currently you can see register value in memory in specific place.
* In compare to with previous solution the speed should be the same.
@@ -226,8 +228,22 @@
*/
/* wrappers to restore state before coming to entry.S */
-
#ifdef CONFIG_MMU
+.section .data
+.align 4
+pt_pool_space:
+ .space PT_SIZE
+
+#ifdef DEBUG
+/* Create space for exception counting. */
+.section .data
+.global exception_debug_table
+.align 4
+exception_debug_table:
+ /* Look at exception vector table. There is 32 exceptions * word size */
+ .space (32 * 4)
+#endif /* DEBUG */
+
.section .rodata
.align 4
_MB_HW_ExceptionVectorTable:
@@ -287,10 +303,10 @@ _hw_exception_handler:
#ifndef CONFIG_MMU
addik r1, r1, -(EX_HANDLER_STACK_SIZ); /* Create stack frame */
#else
- swi r1, r0, TOPHYS(r0_ram + 0); /* GET_SP */
+ swi r1, r0, TOPHYS(pt_pool_space + PT_R1); /* GET_SP */
/* Save date to kernel memory. Here is the problem
* when you came from user space */
- ori r1, r0, TOPHYS(r0_ram + 28);
+ ori r1, r0, TOPHYS(pt_pool_space);
#endif
swi r3, r1, PT_R3
swi r4, r1, PT_R4
@@ -329,12 +345,12 @@ not_in_delay_slot:
#ifdef DEBUG
/* counting which exception happen */
- lwi r5, r0, 0x200 + TOPHYS(r0_ram)
+ lwi r5, r0, TOPHYS(exception_debug_table)
addi r5, r5, 1
- swi r5, r0, 0x200 + TOPHYS(r0_ram)
- lwi r5, r6, 0x200 + TOPHYS(r0_ram)
+ swi r5, r0, TOPHYS(exception_debug_table)
+ lwi r5, r6, TOPHYS(exception_debug_table)
addi r5, r5, 1
- swi r5, r6, 0x200 + TOPHYS(r0_ram)
+ swi r5, r6, TOPHYS(exception_debug_table)
#endif
/* end */
/* Load the HW Exception vector */
@@ -474,7 +490,7 @@ ex_lw_tail:
/* Get the destination register number into r5 */
lbui r5, r0, TOPHYS(ex_reg_op);
/* Form load_word jump table offset (lw_table + (8 * regnum)) */
- la r6, r0, TOPHYS(lw_table);
+ addik r6, r0, TOPHYS(lw_table);
addk r5, r5, r5;
addk r5, r5, r5;
addk r5, r5, r5;
@@ -485,7 +501,7 @@ ex_sw:
/* Get the destination register number into r5 */
lbui r5, r0, TOPHYS(ex_reg_op);
/* Form store_word jump table offset (sw_table + (8 * regnum)) */
- la r6, r0, TOPHYS(sw_table);
+ addik r6, r0, TOPHYS(sw_table);
add r5, r5, r5;
add r5, r5, r5;
add r5, r5, r5;
@@ -896,7 +912,7 @@ ex_lw_vm:
beqid r6, ex_lhw_vm;
load1: lbui r5, r4, 0; /* Exception address in r4 - delay slot */
/* Load a word, byte-by-byte from destination address and save it in tmp space*/
- la r6, r0, ex_tmp_data_loc_0;
+ addik r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
load2: lbui r5, r4, 1;
sbi r5, r6, 1;
@@ -910,7 +926,7 @@ load4: lbui r5, r4, 3;
ex_lhw_vm:
/* Load a half-word, byte-by-byte from destination address and
* save it in tmp space */
- la r6, r0, ex_tmp_data_loc_0;
+ addik r6, r0, ex_tmp_data_loc_0;
sbi r5, r6, 0;
load5: lbui r5, r4, 1;
sbi r5, r6, 1;
@@ -926,7 +942,7 @@ ex_sw_vm:
addik r5, r8, sw_table_vm;
bra r5;
ex_sw_tail_vm:
- la r5, r0, ex_tmp_data_loc_0;
+ addik r5, r0, ex_tmp_data_loc_0;
beqid r6, ex_shw_vm;
swi r3, r5, 0; /* Get the word - delay slot */
/* Store the word, byte-by-byte into destination address */
@@ -969,7 +985,7 @@ ex_unaligned_fixup:
addik r7, r0, SIGSEGV
/* call bad_page_fault for finding aligned fixup, fixup address is saved
* in PT_PC which is used as return address from exception */
- la r15, r0, ret_from_exc-8 /* setup return address */
+ addik r15, r0, ret_from_exc-8 /* setup return address */
brid bad_page_fault
nop