diff options
Diffstat (limited to 'arch/ia64/include')
60 files changed, 71 insertions, 10962 deletions
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 0ea569040c5b..f886d4dc9d55 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -17,7 +17,7 @@ #include <linux/numa.h> #include <asm/numa.h> -#ifdef CONFIG_ACPI + extern int acpi_lapic; #define acpi_disabled 0 /* ACPI always enabled on IA64 */ #define acpi_noirq 0 /* ACPI always enabled on IA64 */ @@ -28,34 +28,10 @@ static inline bool acpi_has_cpu_in_madt(void) { return !!acpi_lapic; } -#endif + #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } -#ifdef CONFIG_IA64_GENERIC -const char *acpi_get_sysname (void); -#else -static inline const char *acpi_get_sysname (void) -{ -# if defined (CONFIG_IA64_HP_SIM) - return "hpsim"; -# elif defined (CONFIG_IA64_HP_ZX1) - return "hpzx1"; -# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) - return "hpzx1_swiotlb"; -# elif defined (CONFIG_IA64_SGI_SN2) - return "sn2"; -# elif defined (CONFIG_IA64_SGI_UV) - return "uv"; -# elif defined (CONFIG_IA64_DIG) - return "dig"; -# elif defined(CONFIG_IA64_DIG_VTD) - return "dig_vtd"; -# else -# error Unknown platform. Fix acpi.c. -# endif -} -#endif int acpi_request_vector (u32 int_type); int acpi_gsi_to_irq (u32 gsi, unsigned int *irq); diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h index f7ec71e4001e..a5d9d788eede 100644 --- a/arch/ia64/include/asm/dma-mapping.h +++ b/arch/ia64/include/asm/dma-mapping.h @@ -6,17 +6,11 @@ * Copyright (C) 2003-2004 Hewlett-Packard Co * David Mosberger-Tang <davidm@hpl.hp.com> */ -#include <asm/machvec.h> -#include <linux/scatterlist.h> -#include <linux/dma-debug.h> - extern const struct dma_map_ops *dma_ops; -extern struct ia64_machine_vector ia64_mv; -extern void set_iommu_machvec(void); static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return platform_dma_get_ops(NULL); + return dma_ops; } #endif /* _ASM_IA64_DMA_MAPPING_H */ diff --git a/arch/ia64/include/asm/dma.h b/arch/ia64/include/asm/dma.h index 23604d6a2cb2..59625e9c1f9c 100644 --- a/arch/ia64/include/asm/dma.h +++ b/arch/ia64/include/asm/dma.h @@ -12,11 +12,7 @@ extern unsigned long MAX_DMA_ADDRESS; -#ifdef CONFIG_PCI - extern int isa_dma_bridge_buggy; -#else -# define isa_dma_bridge_buggy (0) -#endif +extern int isa_dma_bridge_buggy; #define free_dma(x) diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h deleted file mode 100644 index 00fbd5cc8ab8..000000000000 --- a/arch/ia64/include/asm/hpsim.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASMIA64_HPSIM_H -#define _ASMIA64_HPSIM_H - -#ifndef CONFIG_HP_SIMSERIAL_CONSOLE -static inline int simcons_register(void) { return 1; } -#else -int simcons_register(void); -#endif - -struct tty_driver; -extern struct tty_driver *hp_simserial_driver; - -extern int hpsim_get_irq(int intr); -void ia64_ctl_trace(long on); - -#endif diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h index 5dd3c6485c3a..e6385c7bdeb0 100644 --- a/arch/ia64/include/asm/hw_irq.h +++ b/arch/ia64/include/asm/hw_irq.h @@ -12,7 +12,6 @@ #include <linux/types.h> #include <linux/profile.h> -#include <asm/machvec.h> #include <asm/ptrace.h> #include <asm/smp.h> @@ -56,7 +55,7 @@ typedef u8 ia64_vector; extern int ia64_first_device_vector; extern int ia64_last_device_vector; -#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined (CONFIG_IA64_DIG)) +#ifdef CONFIG_SMP /* Reserve the lower priority vector than device vectors for "move IRQ" IPI */ #define IA64_IRQ_MOVE_VECTOR 0x30 /* "move IRQ" IPI */ #define IA64_DEF_FIRST_DEVICE_VECTOR 0x31 @@ -127,7 +126,7 @@ extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect) extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action); extern void destroy_and_reserve_irq (unsigned int irq); -#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)) +#ifdef CONFIG_SMP extern int irq_prepare_move(int irq, int cpu); extern void irq_complete_move(unsigned int irq); #else @@ -137,26 +136,10 @@ static inline void irq_complete_move(unsigned int irq) {} static inline void ia64_native_resend_irq(unsigned int vector) { - platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0); + ia64_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0); } /* - * Default implementations for the irq-descriptor API: - */ -#ifndef CONFIG_IA64_GENERIC -static inline ia64_vector __ia64_irq_to_vector(int irq) -{ - return irq_cfg[irq].vector; -} - -static inline unsigned int -__ia64_local_vector_to_irq (ia64_vector vec) -{ - return __this_cpu_read(vector_irq[vec]); -} -#endif - -/* * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt * vectors. On smaller systems, there is a one-to-one correspondence between interrupt * vectors and the Linux irq numbers. However, larger systems may have multiple interrupt @@ -170,7 +153,7 @@ __ia64_local_vector_to_irq (ia64_vector vec) static inline ia64_vector irq_to_vector (int irq) { - return platform_irq_to_vector(irq); + return irq_cfg[irq].vector; } /* @@ -181,7 +164,7 @@ irq_to_vector (int irq) static inline unsigned int local_vector_to_irq (ia64_vector vec) { - return platform_local_vector_to_irq(vec); + return __this_cpu_read(vector_irq[vec]); } #endif /* _ASM_IA64_HW_IRQ_H */ diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h index a511d62d447a..54e70c21352a 100644 --- a/arch/ia64/include/asm/io.h +++ b/arch/ia64/include/asm/io.h @@ -71,7 +71,6 @@ extern unsigned int num_io_spaces; #define HAVE_ARCH_PIO_SIZE #include <asm/intrinsics.h> -#include <asm/machvec.h> #include <asm/page.h> #include <asm-generic/iomap.h> @@ -129,25 +128,6 @@ __ia64_mk_io_addr (unsigned long port) return (void *) (space->mmio_base | offset); } -#define __ia64_inb ___ia64_inb -#define __ia64_inw ___ia64_inw -#define __ia64_inl ___ia64_inl -#define __ia64_outb ___ia64_outb -#define __ia64_outw ___ia64_outw -#define __ia64_outl ___ia64_outl -#define __ia64_readb ___ia64_readb -#define __ia64_readw ___ia64_readw -#define __ia64_readl ___ia64_readl -#define __ia64_readq ___ia64_readq -#define __ia64_readb_relaxed ___ia64_readb -#define __ia64_readw_relaxed ___ia64_readw -#define __ia64_readl_relaxed ___ia64_readl -#define __ia64_readq_relaxed ___ia64_readq -#define __ia64_writeb ___ia64_writeb -#define __ia64_writew ___ia64_writew -#define __ia64_writel ___ia64_writel -#define __ia64_writeq ___ia64_writeq - /* * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure * that the access has completed before executing other I/O accesses. Since we're doing @@ -156,8 +136,8 @@ __ia64_mk_io_addr (unsigned long port) * during optimization, which is why we use "volatile" pointers. */ -static inline unsigned int -___ia64_inb (unsigned long port) +#define inb inb +static inline unsigned int inb(unsigned long port) { volatile unsigned char *addr = __ia64_mk_io_addr(port); unsigned char ret; @@ -167,8 +147,8 @@ ___ia64_inb (unsigned long port) return ret; } -static inline unsigned int -___ia64_inw (unsigned long port) +#define inw inw +static inline unsigned int inw(unsigned long port) { volatile unsigned short *addr = __ia64_mk_io_addr(port); unsigned short ret; @@ -178,8 +158,8 @@ ___ia64_inw (unsigned long port) return ret; } -static inline unsigned int -___ia64_inl (unsigned long port) +#define inl inl +static inline unsigned int inl(unsigned long port) { volatile unsigned int *addr = __ia64_mk_io_addr(port); unsigned int ret; @@ -189,8 +169,8 @@ ___ia64_inl (unsigned long port) return ret; } -static inline void -___ia64_outb (unsigned char val, unsigned long port) +#define outb outb +static inline void outb(unsigned char val, unsigned long port) { volatile unsigned char *addr = __ia64_mk_io_addr(port); @@ -198,8 +178,8 @@ ___ia64_outb (unsigned char val, unsigned long port) __ia64_mf_a(); } -static inline void -___ia64_outw (unsigned short val, unsigned long port) +#define outw outw +static inline void outw(unsigned short val, unsigned long port) { volatile unsigned short *addr = __ia64_mk_io_addr(port); @@ -207,8 +187,8 @@ ___ia64_outw (unsigned short val, unsigned long port) __ia64_mf_a(); } -static inline void -___ia64_outl (unsigned int val, unsigned long port) +#define outl outl +static inline void outl(unsigned int val, unsigned long port) { volatile unsigned int *addr = __ia64_mk_io_addr(port); @@ -216,199 +196,63 @@ ___ia64_outl (unsigned int val, unsigned long port) __ia64_mf_a(); } -static inline void -__insb (unsigned long port, void *dst, unsigned long count) +#define insb insb +static inline void insb(unsigned long port, void *dst, unsigned long count) { unsigned char *dp = dst; while (count--) - *dp++ = platform_inb(port); + *dp++ = inb(port); } -static inline void -__insw (unsigned long port, void *dst, unsigned long count) +#define insw insw +static inline void insw(unsigned long port, void *dst, unsigned long count) { unsigned short *dp = dst; while (count--) - put_unaligned(platform_inw(port), dp++); + put_unaligned(inw(port), dp++); } -static inline void -__insl (unsigned long port, void *dst, unsigned long count) +#define insl insl +static inline void insl(unsigned long port, void *dst, unsigned long count) { unsigned int *dp = dst; while (count--) - put_unaligned(platform_inl(port), dp++); + put_unaligned(inl(port), dp++); } -static inline void -__outsb (unsigned long port, const void *src, unsigned long count) +#define outsb outsb +static inline void outsb(unsigned long port, const void *src, + unsigned long count) { const unsigned char *sp = src; while (count--) - platform_outb(*sp++, port); + outb(*sp++, port); } -static inline void -__outsw (unsigned long port, const void *src, unsigned long count) +#define outsw outsw +static inline void outsw(unsigned long port, const void *src, + unsigned long count) { const unsigned short *sp = src; while (count--) - platform_outw(get_unaligned(sp++), port); + outw(get_unaligned(sp++), port); } -static inline void -__outsl (unsigned long port, const void *src, unsigned long count) +#define outsl outsl +static inline void outsl(unsigned long port, const void *src, + unsigned long count) { const unsigned int *sp = src; while (count--) - platform_outl(get_unaligned(sp++), port); + outl(get_unaligned(sp++), port); } -/* - * Unfortunately, some platforms are broken and do not follow the IA-64 architecture - * specification regarding legacy I/O support. Thus, we have to make these operations - * platform dependent... - */ -#define __inb platform_inb -#define __inw platform_inw -#define __inl platform_inl -#define __outb platform_outb -#define __outw platform_outw -#define __outl platform_outl - -#define inb(p) __inb(p) -#define inw(p) __inw(p) -#define inl(p) __inl(p) -#define insb(p,d,c) __insb(p,d,c) -#define insw(p,d,c) __insw(p,d,c) -#define insl(p,d,c) __insl(p,d,c) -#define outb(v,p) __outb(v,p) -#define outw(v,p) __outw(v,p) -#define outl(v,p) __outl(v,p) -#define outsb(p,s,c) __outsb(p,s,c) -#define outsw(p,s,c) __outsw(p,s,c) -#define outsl(p,s,c) __outsl(p,s,c) - -/* - * The address passed to these functions are ioremap()ped already. - * - * We need these to be machine vectors since some platforms don't provide - * DMA coherence via PIO reads (PCI drivers and the spec imply that this is - * a good idea). Writes are ok though for all existing ia64 platforms (and - * hopefully it'll stay that way). - */ -static inline unsigned char -___ia64_readb (const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short -___ia64_readw (const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int -___ia64_readl (const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -static inline unsigned long -___ia64_readq (const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *) addr; -} - -static inline void -__writeb (unsigned char val, volatile void __iomem *addr) -{ - *(volatile unsigned char __force *) addr = val; -} - -static inline void -__writew (unsigned short val, volatile void __iomem *addr) -{ - *(volatile unsigned short __force *) addr = val; -} - -static inline void -__writel (unsigned int val, volatile void __iomem *addr) -{ - *(volatile unsigned int __force *) addr = val; -} - -static inline void -__writeq (unsigned long val, volatile void __iomem *addr) -{ - *(volatile unsigned long __force *) addr = val; -} - -#define __readb platform_readb -#define __readw platform_readw -#define __readl platform_readl -#define __readq platform_readq -#define __readb_relaxed platform_readb_relaxed -#define __readw_relaxed platform_readw_relaxed -#define __readl_relaxed platform_readl_relaxed -#define __readq_relaxed platform_readq_relaxed - -#define readb(a) __readb((a)) -#define readw(a) __readw((a)) -#define readl(a) __readl((a)) -#define readq(a) __readq((a)) -#define readb_relaxed(a) __readb_relaxed((a)) -#define readw_relaxed(a) __readw_relaxed((a)) -#define readl_relaxed(a) __readl_relaxed((a)) -#define readq_relaxed(a) __readq_relaxed((a)) -#define __raw_readb readb -#define __raw_readw readw -#define __raw_readl readl -#define __raw_readq readq -#define __raw_readb_relaxed readb_relaxed -#define __raw_readw_relaxed readw_relaxed -#define __raw_readl_relaxed readl_relaxed -#define __raw_readq_relaxed readq_relaxed -#define writeb(v,a) __writeb((v), (a)) -#define writew(v,a) __writew((v), (a)) -#define writel(v,a) __writel((v), (a)) -#define writeq(v,a) __writeq((v), (a)) -#define writeb_relaxed(v,a) __writeb((v), (a)) -#define writew_relaxed(v,a) __writew((v), (a)) -#define writel_relaxed(v,a) __writel((v), (a)) -#define writeq_relaxed(v,a) __writeq((v), (a)) -#define __raw_writeb writeb -#define __raw_writew writew -#define __raw_writel writel -#define __raw_writeq writeq - -#ifndef inb_p -# define inb_p inb -#endif -#ifndef inw_p -# define inw_p inw -#endif -#ifndef inl_p -# define inl_p inl -#endif - -#ifndef outb_p -# define outb_p outb -#endif -#ifndef outw_p -# define outw_p outw -#endif -#ifndef outl_p -# define outl_p outl -#endif - # ifdef __KERNEL__ extern void __iomem * ioremap(unsigned long offset, unsigned long size); diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h index 92aceef63710..7904f591a79b 100644 --- a/arch/ia64/include/asm/iommu.h +++ b/arch/ia64/include/asm/iommu.h @@ -13,6 +13,5 @@ extern int iommu_detected; #define no_iommu (1) #define iommu_detected (0) #endif -extern void machvec_init(const char *name); #endif diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h index f48556cb8afc..a91aeb413e17 100644 --- a/arch/ia64/include/asm/iosapic.h +++ b/arch/ia64/include/asm/iosapic.h @@ -52,8 +52,6 @@ #ifndef __ASSEMBLY__ -#ifdef CONFIG_IOSAPIC - #define NR_IOSAPICS 256 #define iosapic_pcat_compat_init ia64_native_iosapic_pcat_compat_init @@ -103,16 +101,6 @@ extern int __init iosapic_register_platform_intr (u32 int_type, #ifdef CONFIG_NUMA extern void map_iosapic_to_node (unsigned int, int); #endif -#else -#define iosapic_system_init(pcat_compat) do { } while (0) -#define iosapic_init(address,gsi_base) (-EINVAL) -#define iosapic_remove(gsi_base) (-ENODEV) -#define iosapic_register_intr(gsi,polarity,trigger) (gsi) -#define iosapic_unregister_intr(irq) do { } while (0) -#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger) do { } while (0) -#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \ - polarity,trigger) (gsi) -#endif # endif /* !__ASSEMBLY__ */ #endif /* __ASM_IA64_IOSAPIC_H */ diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h index 8b84a55ed38a..5acf52e90872 100644 --- a/arch/ia64/include/asm/irq.h +++ b/arch/ia64/include/asm/irq.h @@ -28,9 +28,6 @@ irq_canonicalize (int irq) } extern void set_irq_affinity_info (unsigned int irq, int dest, int redir); -bool is_affinity_mask_valid(const struct cpumask *cpumask); - -#define is_affinity_mask_valid is_affinity_mask_valid int create_irq(void); void destroy_irq(unsigned int irq); diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h deleted file mode 100644 index beae261fbcb4..000000000000 --- a/arch/ia64/include/asm/machvec.h +++ /dev/null @@ -1,347 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Machine vector for IA-64. - * - * Copyright (C) 1999 Silicon Graphics, Inc. - * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com> - * Copyright (C) Vijay Chander <vijay@engr.sgi.com> - * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co. - * David Mosberger-Tang <davidm@hpl.hp.com> - */ -#ifndef _ASM_IA64_MACHVEC_H -#define _ASM_IA64_MACHVEC_H - -#include <linux/types.h> - -/* forward declarations: */ -struct device; -struct pt_regs; -struct scatterlist; -struct page; -struct mm_struct; -struct pci_bus; -struct task_struct; -struct pci_dev; -struct msi_desc; - -typedef void ia64_mv_setup_t (char **); -typedef void ia64_mv_cpu_init_t (void); -typedef void ia64_mv_irq_init_t (void); -typedef void ia64_mv_send_ipi_t (int, int, int, int); -typedef void ia64_mv_timer_interrupt_t (int, void *); -typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long); -typedef u8 ia64_mv_irq_to_vector (int); -typedef unsigned int ia64_mv_local_vector_to_irq (u8); -typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *); -typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val, - u8 size); -typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val, - u8 size); -typedef void ia64_mv_migrate_t(struct task_struct * task); -typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *); -typedef void ia64_mv_kernel_launch_event_t(void); - -/* DMA-mapping interface: */ -typedef void ia64_mv_dma_init (void); -typedef const struct dma_map_ops *ia64_mv_dma_get_ops(struct device *); - -/* - * WARNING: The legacy I/O space is _architected_. Platforms are - * expected to follow this architected model (see Section 10.7 in the - * IA-64 Architecture Software Developer's Manual). Unfortunately, - * some broken machines do not follow that model, which is why we have - * to make the inX/outX operations part of the machine vector. - * Platform designers should follow the architected model whenever - * possible. - */ -typedef unsigned int ia64_mv_inb_t (unsigned long); -typedef unsigned int ia64_mv_inw_t (unsigned long); -typedef unsigned int ia64_mv_inl_t (unsigned long); -typedef void ia64_mv_outb_t (unsigned char, unsigned long); -typedef void ia64_mv_outw_t (unsigned short, unsigned long); -typedef void ia64_mv_outl_t (unsigned int, unsigned long); -typedef void ia64_mv_mmiowb_t (void); -typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *); -typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *); -typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *); -typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *); -typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *); -typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *); -typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *); -typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *); - -typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *); -typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq); - -static inline void -machvec_noop (void) -{ -} - -static inline void -machvec_noop_task (struct task_struct *task) -{ -} - -static inline void -machvec_noop_bus (struct pci_bus *bus) -{ -} - -extern void machvec_setup (char **); -extern void machvec_timer_interrupt (int, void *); - -# if defined (CONFIG_IA64_HP_SIM) -# include <asm/machvec_hpsim.h> -# elif defined (CONFIG_IA64_DIG) -# include <asm/machvec_dig.h> -# elif defined(CONFIG_IA64_DIG_VTD) -# include <asm/machvec_dig_vtd.h> -# elif defined (CONFIG_IA64_HP_ZX1) -# include <asm/machvec_hpzx1.h> -# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) -# include <asm/machvec_hpzx1_swiotlb.h> -# elif defined (CONFIG_IA64_SGI_SN2) -# include <asm/machvec_sn2.h> -# elif defined (CONFIG_IA64_SGI_UV) -# include <asm/machvec_uv.h> -# elif defined (CONFIG_IA64_GENERIC) - -# ifdef MACHVEC_PLATFORM_HEADER -# include MACHVEC_PLATFORM_HEADER -# else -# define ia64_platform_name ia64_mv.name -# define platform_setup ia64_mv.setup -# define platform_cpu_init ia64_mv.cpu_init -# define platform_irq_init ia64_mv.irq_init -# define platform_send_ipi ia64_mv.send_ipi -# define platform_timer_interrupt ia64_mv.timer_interrupt -# define platform_global_tlb_purge ia64_mv.global_tlb_purge -# define platform_dma_init ia64_mv.dma_init -# define platform_dma_get_ops ia64_mv.dma_get_ops -# define platform_irq_to_vector ia64_mv.irq_to_vector -# define platform_local_vector_to_irq ia64_mv.local_vector_to_irq -# define platform_pci_get_legacy_mem ia64_mv.pci_get_legacy_mem -# define platform_pci_legacy_read ia64_mv.pci_legacy_read -# define platform_pci_legacy_write ia64_mv.pci_legacy_write -# define platform_inb ia64_mv.inb -# define platform_inw ia64_mv.inw -# define platform_inl ia64_mv.inl -# define platform_outb ia64_mv.outb -# define platform_outw ia64_mv.outw -# define platform_outl ia64_mv.outl -# define platform_mmiowb ia64_mv.mmiowb -# define platform_readb ia64_mv.readb -# define platform_readw ia64_mv.readw -# define platform_readl ia64_mv.readl -# define platform_readq ia64_mv.readq -# define platform_readb_relaxed ia64_mv.readb_relaxed -# define platform_readw_relaxed ia64_mv.readw_relaxed -# define platform_readl_relaxed ia64_mv.readl_relaxed -# define platform_readq_relaxed ia64_mv.readq_relaxed -# define platform_migrate ia64_mv.migrate -# define platform_setup_msi_irq ia64_mv.setup_msi_irq -# define platform_teardown_msi_irq ia64_mv.teardown_msi_irq -# define platform_pci_fixup_bus ia64_mv.pci_fixup_bus -# define platform_kernel_launch_event ia64_mv.kernel_launch_event -# endif - -/* __attribute__((__aligned__(16))) is required to make size of the - * structure multiple of 16 bytes. - * This will fillup the holes created because of section 3.3.1 in - * Software Conventions guide. - */ -struct ia64_machine_vector { - const char *name; - ia64_mv_setup_t *setup; - ia64_mv_cpu_init_t *cpu_init; - ia64_mv_irq_init_t *irq_init; - ia64_mv_send_ipi_t *send_ipi; - ia64_mv_timer_interrupt_t *timer_interrupt; - ia64_mv_global_tlb_purge_t *global_tlb_purge; - ia64_mv_dma_init *dma_init; - ia64_mv_dma_get_ops *dma_get_ops; - ia64_mv_irq_to_vector *irq_to_vector; - ia64_mv_local_vector_to_irq *local_vector_to_irq; - ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem; - ia64_mv_pci_legacy_read_t *pci_legacy_read; - ia64_mv_pci_legacy_write_t *pci_legacy_write; - ia64_mv_inb_t *inb; - ia64_mv_inw_t *inw; - ia64_mv_inl_t *inl; - ia64_mv_outb_t *outb; - ia64_mv_outw_t *outw; - ia64_mv_outl_t *outl; - ia64_mv_mmiowb_t *mmiowb; - ia64_mv_readb_t *readb; - ia64_mv_readw_t *readw; - ia64_mv_readl_t *readl; - ia64_mv_readq_t *readq; - ia64_mv_readb_relaxed_t *readb_relaxed; - ia64_mv_readw_relaxed_t *readw_relaxed; - ia64_mv_readl_relaxed_t *readl_relaxed; - ia64_mv_readq_relaxed_t *readq_relaxed; - ia64_mv_migrate_t *migrate; - ia64_mv_setup_msi_irq_t *setup_msi_irq; - ia64_mv_teardown_msi_irq_t *teardown_msi_irq; - ia64_mv_pci_fixup_bus_t *pci_fixup_bus; - ia64_mv_kernel_launch_event_t *kernel_launch_event; -} __attribute__((__aligned__(16))); /* align attrib? see above comment */ - -#define MACHVEC_INIT(name) \ -{ \ - #name, \ - platform_setup, \ - platform_cpu_init, \ - platform_irq_init, \ - platform_send_ipi, \ - platform_timer_interrupt, \ - platform_global_tlb_purge, \ - platform_dma_init, \ - platform_dma_get_ops, \ - platform_irq_to_vector, \ - platform_local_vector_to_irq, \ - platform_pci_get_legacy_mem, \ - platform_pci_legacy_read, \ - platform_pci_legacy_write, \ - platform_inb, \ - platform_inw, \ - platform_inl, \ - platform_outb, \ - platform_outw, \ - platform_outl, \ - platform_mmiowb, \ - platform_readb, \ - platform_readw, \ - platform_readl, \ - platform_readq, \ - platform_readb_relaxed, \ - platform_readw_relaxed, \ - platform_readl_relaxed, \ - platform_readq_relaxed, \ - platform_migrate, \ - platform_setup_msi_irq, \ - platform_teardown_msi_irq, \ - platform_pci_fixup_bus, \ - platform_kernel_launch_event \ -} - -extern struct ia64_machine_vector ia64_mv; -extern void machvec_init (const char *name); -extern void machvec_init_from_cmdline(const char *cmdline); - -# else -# error Unknown configuration. Update arch/ia64/include/asm/machvec.h. -# endif /* CONFIG_IA64_GENERIC */ - -extern void swiotlb_dma_init(void); -extern const struct dma_map_ops *dma_get_ops(struct device *); - -/* - * Define default versions so we can extend machvec for new platforms without having - * to update the machvec files for all existing platforms. - */ -#ifndef platform_setup -# define platform_setup machvec_setup -#endif -#ifndef platform_cpu_init -# define platform_cpu_init machvec_noop -#endif -#ifndef platform_irq_init -# define platform_irq_init machvec_noop -#endif - -#ifndef platform_send_ipi -# define platform_send_ipi ia64_send_ipi /* default to architected version */ -#endif -#ifndef platform_timer_interrupt -# define platform_timer_interrupt machvec_timer_interrupt -#endif -#ifndef platform_global_tlb_purge -# define platform_global_tlb_purge ia64_global_tlb_purge /* default to architected version */ -#endif -#ifndef platform_kernel_launch_event -# define platform_kernel_launch_event machvec_noop -#endif -#ifndef platform_dma_init -# define platform_dma_init swiotlb_dma_init -#endif -#ifndef platform_dma_get_ops -# define platform_dma_get_ops dma_get_ops -#endif -#ifndef platform_irq_to_vector -# define platform_irq_to_vector __ia64_irq_to_vector -#endif -#ifndef platform_local_vector_to_irq -# define platform_local_vector_to_irq __ia64_local_vector_to_irq -#endif -#ifndef platform_pci_get_legacy_mem -# define platform_pci_get_legacy_mem ia64_pci_get_legacy_mem -#endif -#ifndef platform_pci_legacy_read -# define platform_pci_legacy_read ia64_pci_legacy_read -extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size); -#endif -#ifndef platform_pci_legacy_write -# define platform_pci_legacy_write ia64_pci_legacy_write -extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size); -#endif -#ifndef platform_inb -# define platform_inb __ia64_inb -#endif -#ifndef platform_inw -# define platform_inw __ia64_inw -#endif -#ifndef platform_inl -# define platform_inl __ia64_inl -#endif -#ifndef platform_outb -# define platform_outb __ia64_outb -#endif -#ifndef platform_outw -# define platform_outw __ia64_outw -#endif -#ifndef platform_outl -# define platform_outl __ia64_outl -#endif -#ifndef platform_mmiowb -# define platform_mmiowb __ia64_mmiowb -#endif -#ifndef platform_readb -# define platform_readb __ia64_readb -#endif -#ifndef platform_readw -# define platform_readw __ia64_readw -#endif -#ifndef platform_readl -# define platform_readl __ia64_readl -#endif -#ifndef platform_readq -# define platform_readq __ia64_readq -#endif -#ifndef platform_readb_relaxed -# define platform_readb_relaxed __ia64_readb_relaxed -#endif -#ifndef platform_readw_relaxed -# define platform_readw_relaxed __ia64_readw_relaxed -#endif -#ifndef platform_readl_relaxed -# define platform_readl_relaxed __ia64_readl_relaxed -#endif -#ifndef platform_readq_relaxed -# define platform_readq_relaxed __ia64_readq_relaxed -#endif -#ifndef platform_migrate -# define platform_migrate machvec_noop_task -#endif -#ifndef platform_setup_msi_irq -# define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) -#endif -#ifndef platform_teardown_msi_irq -# define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) -#endif -#ifndef platform_pci_fixup_bus -# define platform_pci_fixup_bus machvec_noop_bus -#endif - -#endif /* _ASM_IA64_MACHVEC_H */ diff --git a/arch/ia64/include/asm/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h deleted file mode 100644 index bc230f69faeb..000000000000 --- a/arch/ia64/include/asm/machvec_dig.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_DIG_h -#define _ASM_IA64_MACHVEC_DIG_h - -extern ia64_mv_setup_t dig_setup; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "dig" -#define platform_setup dig_setup - -#endif /* _ASM_IA64_MACHVEC_DIG_h */ diff --git a/arch/ia64/include/asm/machvec_dig_vtd.h b/arch/ia64/include/asm/machvec_dig_vtd.h deleted file mode 100644 index bb44eb9039dd..000000000000 --- a/arch/ia64/include/asm/machvec_dig_vtd.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_DIG_VTD_h -#define _ASM_IA64_MACHVEC_DIG_VTD_h - -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_init pci_iommu_alloc; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "dig_vtd" -#define platform_setup dig_setup -#define platform_dma_init pci_iommu_alloc - -#endif /* _ASM_IA64_MACHVEC_DIG_VTD_h */ diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h deleted file mode 100644 index 056f8405822e..000000000000 --- a/arch/ia64/include/asm/machvec_hpsim.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_HPSIM_h -#define _ASM_IA64_MACHVEC_HPSIM_h - -extern ia64_mv_setup_t hpsim_setup; -extern ia64_mv_irq_init_t hpsim_irq_init; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "hpsim" -#define platform_setup hpsim_setup -#define platform_irq_init hpsim_irq_init - -#endif /* _ASM_IA64_MACHVEC_HPSIM_h */ diff --git a/arch/ia64/include/asm/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h deleted file mode 100644 index 5299ac38bfb6..000000000000 --- a/arch/ia64/include/asm/machvec_hpzx1.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_HPZX1_h -#define _ASM_IA64_MACHVEC_HPZX1_h - -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_init sba_dma_init; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "hpzx1" -#define platform_setup dig_setup -#define platform_dma_init sba_dma_init - -#endif /* _ASM_IA64_MACHVEC_HPZX1_h */ diff --git a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h deleted file mode 100644 index 5aec6a008c61..000000000000 --- a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h -#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h - -extern ia64_mv_setup_t dig_setup; -extern ia64_mv_dma_get_ops hwsw_dma_get_ops; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "hpzx1_swiotlb" -#define platform_setup dig_setup -#define platform_dma_init machvec_noop -#define platform_dma_get_ops hwsw_dma_get_ops - -#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */ diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h deleted file mode 100644 index 2aafb69a3787..000000000000 --- a/arch/ia64/include/asm/machvec_init.h +++ /dev/null @@ -1,35 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#include <asm/iommu.h> -#include <asm/machvec.h> - -extern ia64_mv_send_ipi_t ia64_send_ipi; -extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge; -extern ia64_mv_irq_to_vector __ia64_irq_to_vector; -extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq; -extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem; -extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read; -extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write; - -extern ia64_mv_inb_t __ia64_inb; -extern ia64_mv_inw_t __ia64_inw; -extern ia64_mv_inl_t __ia64_inl; -extern ia64_mv_outb_t __ia64_outb; -extern ia64_mv_outw_t __ia64_outw; -extern ia64_mv_outl_t __ia64_outl; -extern ia64_mv_mmiowb_t __ia64_mmiowb; -extern ia64_mv_readb_t __ia64_readb; -extern ia64_mv_readw_t __ia64_readw; -extern ia64_mv_readl_t __ia64_readl; -extern ia64_mv_readq_t __ia64_readq; -extern ia64_mv_readb_t __ia64_readb_relaxed; -extern ia64_mv_readw_t __ia64_readw_relaxed; -extern ia64_mv_readl_t __ia64_readl_relaxed; -extern ia64_mv_readq_t __ia64_readq_relaxed; - -#define MACHVEC_HELPER(name) \ - struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec"))) \ - = MACHVEC_INIT(name); - -#define MACHVEC_DEFINE(name) MACHVEC_HELPER(name) - -MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME) diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h deleted file mode 100644 index a243e4fb4877..000000000000 --- a/arch/ia64/include/asm/machvec_sn2.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of version 2 of the GNU General Public License - * as published by the Free Software Foundation. - * - * This program is distributed in the hope that it would be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - * - * Further, this software is distributed without any warranty that it is - * free of the rightful claim of any third person regarding infringement - * or the like. Any license provided herein, whether implied or - * otherwise, applies only to this software file. Patent licenses, if - * any, provided herein do not apply to combinations of this program with - * other software, or any other product whatsoever. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * For further information regarding this notice, see: - * - * http://oss.sgi.com/projects/GenInfo/NoticeExplan - */ - -#ifndef _ASM_IA64_MACHVEC_SN2_H -#define _ASM_IA64_MACHVEC_SN2_H - -extern ia64_mv_setup_t sn_setup; -extern ia64_mv_cpu_init_t sn_cpu_init; -extern ia64_mv_irq_init_t sn_irq_init; -extern ia64_mv_send_ipi_t sn2_send_IPI; -extern ia64_mv_timer_interrupt_t sn_timer_interrupt; -extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge; -extern ia64_mv_irq_to_vector sn_irq_to_vector; -extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq; -extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem; -extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read; -extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write; -extern ia64_mv_inb_t __sn_inb; -extern ia64_mv_inw_t __sn_inw; -extern ia64_mv_inl_t __sn_inl; -extern ia64_mv_outb_t __sn_outb; -extern ia64_mv_outw_t __sn_outw; -extern ia64_mv_outl_t __sn_outl; -extern ia64_mv_mmiowb_t __sn_mmiowb; -extern ia64_mv_readb_t __sn_readb; -extern ia64_mv_readw_t __sn_readw; -extern ia64_mv_readl_t __sn_readl; -extern ia64_mv_readq_t __sn_readq; -extern ia64_mv_readb_t __sn_readb_relaxed; -extern ia64_mv_readw_t __sn_readw_relaxed; -extern ia64_mv_readl_t __sn_readl_relaxed; -extern ia64_mv_readq_t __sn_readq_relaxed; -extern ia64_mv_dma_init sn_dma_init; -extern ia64_mv_migrate_t sn_migrate; -extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event; -extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq; -extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq; -extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus; - - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "sn2" -#define platform_setup sn_setup -#define platform_cpu_init sn_cpu_init -#define platform_irq_init sn_irq_init -#define platform_send_ipi sn2_send_IPI -#define platform_timer_interrupt sn_timer_interrupt -#define platform_global_tlb_purge sn2_global_tlb_purge -#define platform_pci_fixup sn_pci_fixup -#define platform_inb __sn_inb -#define platform_inw __sn_inw -#define platform_inl __sn_inl -#define platform_outb __sn_outb -#define platform_outw __sn_outw -#define platform_outl __sn_outl -#define platform_mmiowb __sn_mmiowb -#define platform_readb __sn_readb -#define platform_readw __sn_readw -#define platform_readl __sn_readl -#define platform_readq __sn_readq -#define platform_readb_relaxed __sn_readb_relaxed -#define platform_readw_relaxed __sn_readw_relaxed -#define platform_readl_relaxed __sn_readl_relaxed -#define platform_readq_relaxed __sn_readq_relaxed -#define platform_irq_to_vector sn_irq_to_vector -#define platform_local_vector_to_irq sn_local_vector_to_irq -#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem -#define platform_pci_legacy_read sn_pci_legacy_read -#define platform_pci_legacy_write sn_pci_legacy_write -#define platform_dma_init sn_dma_init -#define platform_migrate sn_migrate -#define platform_kernel_launch_event sn_kernel_launch_event -#ifdef CONFIG_PCI_MSI -#define platform_setup_msi_irq sn_setup_msi_irq -#define platform_teardown_msi_irq sn_teardown_msi_irq -#else -#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL) -#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL) -#endif -#define platform_pci_fixup_bus sn_pci_fixup_bus - -#include <asm/sn/io.h> - -#endif /* _ASM_IA64_MACHVEC_SN2_H */ diff --git a/arch/ia64/include/asm/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h deleted file mode 100644 index 2c50853f35ac..000000000000 --- a/arch/ia64/include/asm/machvec_uv.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI UV Core Functions - * - * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_MACHVEC_UV_H -#define _ASM_IA64_MACHVEC_UV_H - -extern ia64_mv_setup_t uv_setup; - -/* - * This stuff has dual use! - * - * For a generic kernel, the macros are used to initialize the - * platform's machvec structure. When compiling a non-generic kernel, - * the macros are used directly. - */ -#define ia64_platform_name "uv" -#define platform_setup uv_setup - -#endif /* _ASM_IA64_MACHVEC_UV_H */ diff --git a/arch/ia64/include/asm/mmiowb.h b/arch/ia64/include/asm/mmiowb.h index 297b85ac84a0..d67aab4ea3b4 100644 --- a/arch/ia64/include/asm/mmiowb.h +++ b/arch/ia64/include/asm/mmiowb.h @@ -3,22 +3,14 @@ #ifndef _ASM_IA64_MMIOWB_H #define _ASM_IA64_MMIOWB_H -#include <asm/machvec.h> - /** - * ___ia64_mmiowb - I/O write barrier + * mmiowb - I/O write barrier * * Ensure ordering of I/O space writes. This will make sure that writes * following the barrier will arrive after all previous writes. For most * ia64 platforms, this is a simple 'mf.a' instruction. */ -static inline void ___ia64_mmiowb(void) -{ - ia64_mfa(); -} - -#define __ia64_mmiowb ___ia64_mmiowb -#define mmiowb() platform_mmiowb() +#define mmiowb() ia64_mfa() #include <asm-generic/mmiowb.h> diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h index e0de61709cf1..767201f66c93 100644 --- a/arch/ia64/include/asm/mmzone.h +++ b/arch/ia64/include/asm/mmzone.h @@ -27,16 +27,9 @@ static inline int pfn_to_nid(unsigned long pfn) return nid; } -#ifdef CONFIG_IA64_DIG /* DIG systems are small */ -# define MAX_PHYSNODE_ID 8 -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8) -#else /* sn2 is the biggest case, so we use that if !DIG */ -# define MAX_PHYSNODE_ID 2048 -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) -#endif - -#else /* CONFIG_NUMA */ -# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) +#define MAX_PHYSNODE_ID 2048 #endif /* CONFIG_NUMA */ +#define NR_NODE_MEMBLKS (MAX_NUMNODES * 4) + #endif /* _ASM_IA64_MMZONE_H */ diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index 780e8744ba85..8c163d1d0189 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -39,9 +39,9 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma, enum pci_mmap_state mmap_state); -#define pci_get_legacy_mem platform_pci_get_legacy_mem -#define pci_legacy_read platform_pci_legacy_read -#define pci_legacy_write platform_pci_legacy_write +char *pci_get_legacy_mem(struct pci_bus *bus); +int pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size); +int pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size); struct pci_controller { struct acpi_device *companion; @@ -69,7 +69,4 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14); } -#ifdef CONFIG_INTEL_IOMMU -extern void pci_iommu_alloc(void); -#endif #endif /* _ASM_IA64_PCI_H */ diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h index c91ef98ed6bf..95a2ec37400f 100644 --- a/arch/ia64/include/asm/processor.h +++ b/arch/ia64/include/asm/processor.h @@ -679,8 +679,6 @@ enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_FORCE_MWAIT, void default_idle(void); -#define ia64_platform_is(x) (strcmp(x, ia64_platform_name) == 0) - #endif /* !__ASSEMBLY__ */ #endif /* _ASM_IA64_PROCESSOR_H */ diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h deleted file mode 100644 index fd480db25565..000000000000 --- a/arch/ia64/include/asm/sn/acpi.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_ACPI_H -#define _ASM_IA64_SN_ACPI_H - -extern int sn_acpi_rev; -#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101) - -#endif /* _ASM_IA64_SN_ACPI_H */ diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h deleted file mode 100644 index e715c794b186..000000000000 --- a/arch/ia64/include/asm/sn/addrs.h +++ /dev/null @@ -1,299 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_ADDRS_H -#define _ASM_IA64_SN_ADDRS_H - -#include <asm/percpu.h> -#include <asm/sn/types.h> -#include <asm/sn/arch.h> -#include <asm/sn/pda.h> - -/* - * Memory/SHUB Address Format: - * +-+---------+--+--------------+ - * |0| NASID |AS| NodeOffset | - * +-+---------+--+--------------+ - * - * NASID: (low NASID bit is 0) Memory and SHUB MMRs - * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0 - * 00: Local Resources and MMR space - * Top bit of NodeOffset - * 0: Local resources space - * node id: - * 0: IA64/NT compatibility space - * 2: Local MMR Space - * 4: Local memory, regardless of local node id - * 1: Global MMR space - * 01: GET space. - * 10: AMO space. - * 11: Cacheable memory space. - * - * NodeOffset: byte offset - * - * - * TIO address format: - * +-+----------+--+--------------+ - * |0| NASID |AS| Nodeoffset | - * +-+----------+--+--------------+ - * - * NASID: (low NASID bit is 1) TIO - * AS: 2-bit Chiplet Identifier - * 00: TIO LB (Indicates TIO MMR access.) - * 01: TIO ICE (indicates coretalk space access.) - * - * NodeOffset: top bit must be set. - * - * - * Note that in both of the above address formats, the low - * NASID bit indicates if the reference is to the SHUB or TIO MMRs. - */ - - -/* - * Define basic shift & mask constants for manipulating NASIDs and AS values. - */ -#define NASID_BITMASK (sn_hub_info->nasid_bitmask) -#define NASID_SHIFT (sn_hub_info->nasid_shift) -#define AS_SHIFT (sn_hub_info->as_shift) -#define AS_BITMASK 0x3UL - -#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT) -#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT) - - -/* - * AS values. These are the same on both SHUB1 & SHUB2. - */ -#define AS_GET_VAL 1UL -#define AS_AMO_VAL 2UL -#define AS_CAC_VAL 3UL -#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT) -#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT) -#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT) - - -/* - * Virtual Mode Local & Global MMR space. - */ -#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL -#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL -#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET) -#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET) -#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET) - -#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL -#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL -#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET) -#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET) - -/* - * Physical mode addresses - */ -#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET) - - -/* - * Clear region & AS bits. - */ -#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK)) - - -/* - * Misc NASID manipulation. - */ -#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT) -#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a)) -#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1)) -#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT) -#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK) -#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a)) -#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a)) -#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a)) -#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a)) -#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n))) -#define IS_TIO_NASID(n) ((n) & 1) - - -/* non-II mmr's start at top of big window space (4G) */ -#define BWIN_TOP 0x0000000100000000UL - -/* - * general address defines - */ -#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE) -#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE) -#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE) -#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE) - -/* - * Convert Memory addresses between various addressing modes. - */ -#define TO_PHYS(x) (TO_PHYS_MASK & (x)) -#define TO_CAC(x) (CAC_BASE | TO_PHYS(x)) -#ifdef CONFIG_SGI_SN -#define TO_AMO(x) (AMO_BASE | TO_PHYS(x)) -#define TO_GET(x) (GET_BASE | TO_PHYS(x)) -#else -#define TO_AMO(x) ({ BUG(); x; }) -#define TO_GET(x) ({ BUG(); x; }) -#endif - -/* - * Covert from processor physical address to II/TIO physical address: - * II - squeeze out the AS bits - * TIO- requires a chiplet id in bits 38-39. For DMA to memory, - * the chiplet id is zero. If we implement TIO-TIO dma, we might need - * to insert a chiplet id into this macro. However, it is our belief - * right now that this chiplet id will be ICE, which is also zero. - */ -#define SH1_TIO_PHYS_TO_DMA(x) \ - ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x)) - -#define SH2_NETWORK_BANK_OFFSET(x) \ - ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1)) - -#define SH2_NETWORK_BANK_SELECT(x) \ - ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \ - >> (sn_hub_info->nasid_shift - 4)) << 36) - -#define SH2_NETWORK_ADDRESS(x) \ - (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x)) - -#define SH2_TIO_PHYS_TO_DMA(x) \ - (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x)) - -#define PHYS_TO_TIODMA(x) \ - (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x)) - -#define PHYS_TO_DMA(x) \ - ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x)) - - -/* - * Macros to test for address type. - */ -#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE) -#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE) - - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ -#define BWIN_SIZE_BITS 29 /* big window size: 512M */ -#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */ -#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \ - : RAW_NODE_SWIN_BASE(n, w)) -#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \ - ((u64) (w) << TIO_SWIN_SIZE_BITS)) -#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n)) -#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n)) -#define BWIN_SIZE (1UL << BWIN_SIZE_BITS) -#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE) -#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS)) -#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS)) -#define BWIN_WIDGET_MASK 0x7 -#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK) -#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP) - -#define TIO_BWIN_WINDOW_SELECT_MASK 0x7 -#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK) - -#define TIO_HWIN_SHIFT_BITS 33 -#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS) - -/* - * The following definitions pertain to the IO special address - * space. They define the location of the big and little windows - * of any given node. - */ - -#define SWIN_SIZE_BITS 24 -#define SWIN_WIDGET_MASK 0xF - -#define TIO_SWIN_SIZE_BITS 28 -#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS) -#define TIO_SWIN_WIDGET_MASK 0x3 - -/* - * Convert smallwindow address to xtalk address. - * - * 'addr' can be physical or virtual address, but will be converted - * to Xtalk address in the range 0 -> SWINZ_SIZEMASK - */ -#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK) -#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK) - - -/* - * The following macros produce the correct base virtual address for - * the hub registers. The REMOTE_HUB_* macro produce - * the address for the specified hub's registers. The intent is - * that the appropriate PI, MD, NI, or II register would be substituted - * for x. - * - * WARNING: - * When certain Hub chip workaround are defined, it's not sufficient - * to dereference the *_HUB_ADDR() macros. You should instead use - * HUB_L() and HUB_S() if you must deal with pointers to hub registers. - * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). - * They're always safe. - */ -/* Shub1 TIO & MMR addressing macros */ -#define SH1_TIO_IOSPACE_ADDR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - -#define SH1_REMOTE_BWIN_MMR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - -#define SH1_REMOTE_SWIN_MMR(n,x) \ - (NODE_SWIN_BASE(n,1) + 0x800000UL + (x)) - -#define SH1_REMOTE_MMR(n,x) \ - (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \ - SH1_REMOTE_SWIN_MMR(n,x)) - -/* Shub1 TIO & MMR addressing macros */ -#define SH2_TIO_IOSPACE_ADDR(n,x) \ - ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2))) - -#define SH2_REMOTE_MMR(n,x) \ - GLOBAL_MMR_ADDR(n,x) - - -/* TIO & MMR addressing macros that work on both shub1 & shub2 */ -#define TIO_IOSPACE_ADDR(n,x) \ - ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \ - SH2_TIO_IOSPACE_ADDR(n,x))) - -#define SH_REMOTE_MMR(n,x) \ - (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x)) - -#define REMOTE_HUB_ADDR(n,x) \ - (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \ - ((volatile u64*)SH_REMOTE_MMR(n,x))) - - -#define HUB_L(x) (*((volatile typeof(*x) *)x)) -#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d)) - -#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a))) -#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d)) - -/* - * Coretalk address breakdown - */ -#define CTALK_NASID_SHFT 40 -#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT) -#define CTALK_CID_SHFT 38 -#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT) -#define CTALK_NODE_OFFSET 0x3FFFFFFFFF - -#endif /* _ASM_IA64_SN_ADDRS_H */ diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h deleted file mode 100644 index 31eb784866f8..000000000000 --- a/arch/ia64/include/asm/sn/arch.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * SGI specific setup. - * - * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved. - * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org) - */ -#ifndef _ASM_IA64_SN_ARCH_H -#define _ASM_IA64_SN_ARCH_H - -#include <linux/numa.h> -#include <asm/types.h> -#include <asm/percpu.h> -#include <asm/sn/types.h> -#include <asm/sn/sn_cpuid.h> - -/* - * This is the maximum number of NUMALINK nodes that can be part of a single - * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in - * remote partitions are NOT included in this number. - * The number of compact nodes cannot exceed size of a coherency domain. - * The purpose of this define is to specify a node count that includes - * all C/M/TIO nodes in an SSI system. - * - * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes. - * - * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade - * to ACPI3.0, this limit will be removed. The notion of "compact nodes" - * should be deleted and TIOs should be included in MAX_NUMNODES. - */ -#define MAX_TIO_NODES MAX_NUMNODES -#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES) - -/* - * Maximum number of nodes in all partitions and in all coherency domains. - * This is the total number of nodes accessible in the numalink fabric. It - * includes all C & M bricks, plus all TIOs. - * - * This value is also the value of the maximum number of NASIDs in the numalink - * fabric. - */ -#define MAX_NUMALINK_NODES 16384 - -/* - * The following defines attributes of the HUB chip. These attributes are - * frequently referenced. They are kept in the per-cpu data areas of each cpu. - * They are kept together in a struct to minimize cache misses. - */ -struct sn_hub_info_s { - u8 shub2; - u8 nasid_shift; - u8 as_shift; - u8 shub_1_1_found; - u16 nasid_bitmask; -}; -DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); -#define sn_hub_info this_cpu_ptr(&__sn_hub_info) -#define is_shub2() (sn_hub_info->shub2) -#define is_shub1() (sn_hub_info->shub2 == 0) - -/* - * Use this macro to test if shub 1.1 wars should be enabled - */ -#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found) - - -/* - * Compact node ID to nasid mappings kept in the per-cpu data areas of each - * cpu. - */ -DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); -#define sn_cnodeid_to_nasid this_cpu_ptr(&__sn_cnodeid_to_nasid[0]) - - -extern u8 sn_partition_id; -extern u8 sn_system_size; -extern u8 sn_sharing_domain_size; -extern u8 sn_region_size; - -extern void sn_flush_all_caches(long addr, long bytes); -extern bool sn_cpu_disable_allowed(int cpu); - -#endif /* _ASM_IA64_SN_ARCH_H */ diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h deleted file mode 100644 index cd71ab5faf62..000000000000 --- a/arch/ia64/include/asm/sn/bte.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved. - */ - - -#ifndef _ASM_IA64_SN_BTE_H -#define _ASM_IA64_SN_BTE_H - -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/cache.h> -#include <asm/sn/pda.h> -#include <asm/sn/types.h> -#include <asm/sn/shub_mmr.h> - -struct nodepda_s; - -#define IBCT_NOTIFY (0x1UL << 4) -#define IBCT_ZFIL_MODE (0x1UL << 0) - -/* #define BTE_DEBUG */ -/* #define BTE_DEBUG_VERBOSE */ - -#ifdef BTE_DEBUG -# define BTE_PRINTK(x) printk x /* Terse */ -# ifdef BTE_DEBUG_VERBOSE -# define BTE_PRINTKV(x) printk x /* Verbose */ -# else -# define BTE_PRINTKV(x) -# endif /* BTE_DEBUG_VERBOSE */ -#else -# define BTE_PRINTK(x) -# define BTE_PRINTKV(x) -#endif /* BTE_DEBUG */ - - -/* BTE status register only supports 16 bits for length field */ -#define BTE_LEN_BITS (16) -#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1) -#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT) - - -/* Define hardware */ -#define BTES_PER_NODE (is_shub2() ? 4 : 2) -#define MAX_BTES_PER_NODE 4 - -#define BTE2OFF_CTRL 0 -#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0) -#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0) - -#define BTE_BASE_ADDR(interface) \ - (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \ - (interface == 1) ? SH2_BT_ENG_CSR_1 : \ - (interface == 2) ? SH2_BT_ENG_CSR_2 : \ - SH2_BT_ENG_CSR_3 \ - : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1) - -#define BTE_SOURCE_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_SRC/8) \ - : base + (BTEOFF_SRC/8)) - -#define BTE_DEST_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_DEST/8) \ - : base + (BTEOFF_DEST/8)) - -#define BTE_CTRL_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_CTRL/8) \ - : base + (BTEOFF_CTRL/8)) - -#define BTE_NOTIF_ADDR(base) \ - (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \ - : base + (BTEOFF_NOTIFY/8)) - -/* Define hardware modes */ -#define BTE_NOTIFY IBCT_NOTIFY -#define BTE_NORMAL BTE_NOTIFY -#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE) -/* Use a reserved bit to let the caller specify a wait for any BTE */ -#define BTE_WACQUIRE 0x4000 -/* Use the BTE on the node with the destination memory */ -#define BTE_USE_DEST (BTE_WACQUIRE << 1) -/* Use any available BTE interface on any node for the transfer */ -#define BTE_USE_ANY (BTE_USE_DEST << 1) -/* macro to force the IBCT0 value valid */ -#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE)) - -#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR) -#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1) -#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE) - -/* - * Some macros to simplify reading. - * Start with macros to locate the BTE control registers. - */ -#define BTE_LNSTAT_LOAD(_bte) \ - HUB_L(_bte->bte_base_addr) -#define BTE_LNSTAT_STORE(_bte, _x) \ - HUB_S(_bte->bte_base_addr, (_x)) -#define BTE_SRC_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_source_addr, __addr); \ -}) -#define BTE_DEST_STORE(_bte, _x) \ -({ \ - u64 __addr = ((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_destination_addr, __addr); \ -}) -#define BTE_CTRL_STORE(_bte, _x) \ - HUB_S(_bte->bte_control_addr, (_x)) -#define BTE_NOTIF_STORE(_bte, _x) \ -({ \ - u64 __addr = ia64_tpa((_x) & ~AS_MASK); \ - if (is_shub2()) \ - __addr = SH2_TIO_PHYS_TO_DMA(__addr); \ - HUB_S(_bte->bte_notify_addr, __addr); \ -}) - -#define BTE_START_TRANSFER(_bte, _len, _mode) \ - is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \ - : BTE_LNSTAT_STORE(_bte, _len); \ - BTE_CTRL_STORE(_bte, _mode) - -/* Possible results from bte_copy and bte_unaligned_copy */ -/* The following error codes map into the BTE hardware codes - * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses - * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero - * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error - * codes to give the following error codes. - */ -#define BTEFAIL_OFFSET 1 - -typedef enum { - BTE_SUCCESS, /* 0 is success */ - BTEFAIL_DIR, /* Directory error due to IIO access*/ - BTEFAIL_POISON, /* poison error on IO access (write to poison page) */ - BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */ - BTEFAIL_ACCESS, /* access error (protection violation) */ - BTEFAIL_PWERR, /* Partial Write Error */ - BTEFAIL_PRERR, /* Partial Read Error */ - BTEFAIL_TOUT, /* CRB Time out */ - BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */ - BTEFAIL_NOTAVAIL, /* BTE not available */ -} bte_result_t; - -#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */ -#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */ -#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */ -#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */ -#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */ -#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */ -#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */ - -#define BTE_ERR_BITS 0x3FUL -#define BTE_ERR_SHIFT 36 -#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT) - -#define BTE_ERROR_RETRY(value) \ - (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \ - : (value != BTEFAIL_TOUT)) - -/* - * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2() - */ -#define BTE_SHUB2_ERROR(_status) \ - ((_status & BTE_ERR_MASK) \ - ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \ - : _status) - -#define BTE_GET_ERROR_STATUS(_status) \ - (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR) - -#define BTE_VALID_SH2_ERROR(value) \ - ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL)) - -/* - * Structure defining a bte. An instance of this - * structure is created in the nodepda for each - * bte on that node (as defined by BTES_PER_NODE) - * This structure contains everything necessary - * to work with a BTE. - */ -struct bteinfo_s { - volatile u64 notify ____cacheline_aligned; - u64 *bte_base_addr ____cacheline_aligned; - u64 *bte_source_addr; - u64 *bte_destination_addr; - u64 *bte_control_addr; - u64 *bte_notify_addr; - spinlock_t spinlock; - cnodeid_t bte_cnode; /* cnode */ - int bte_error_count; /* Number of errors encountered */ - int bte_num; /* 0 --> BTE0, 1 --> BTE1 */ - int cleanup_active; /* Interface is locked for cleanup */ - volatile bte_result_t bh_error; /* error while processing */ - volatile u64 *most_rcnt_na; - struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE]; -}; - - -/* - * Function prototypes (functions defined in bte.c, used elsewhere) - */ -extern bte_result_t bte_copy(u64, u64, u64, u64, void *); -extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64); -extern void bte_error_handler(struct nodepda_s *); - -#define bte_zero(dest, len, mode, notification) \ - bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification) - -/* - * The following is the preferred way of calling bte_unaligned_copy - * If the copy is fully cache line aligned, then bte_copy is - * used instead. Since bte_copy is inlined, this saves a call - * stack. NOTE: bte_copy is called synchronously and does block - * until the transfer is complete. In order to get the asynch - * version of bte_copy, you must perform this check yourself. - */ -#define BTE_UNALIGNED_COPY(src, dest, len, mode) \ - (((len & (L1_CACHE_BYTES - 1)) || \ - (src & (L1_CACHE_BYTES - 1)) || \ - (dest & (L1_CACHE_BYTES - 1))) ? \ - bte_unaligned_copy(src, dest, len, mode) : \ - bte_copy(src, dest, len, mode, NULL)) - - -#endif /* _ASM_IA64_SN_BTE_H */ diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h deleted file mode 100644 index d340c365a824..000000000000 --- a/arch/ia64/include/asm/sn/clksupport.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -/* - * This file contains definitions for accessing a platform supported high resolution - * clock. The clock is monitonically increasing and can be accessed from any node - * in the system. The clock is synchronized across nodes - all nodes see the - * same value. - * - * RTC_COUNTER_ADDR - contains the address of the counter - * - */ - -#ifndef _ASM_IA64_SN_CLKSUPPORT_H -#define _ASM_IA64_SN_CLKSUPPORT_H - -extern unsigned long sn_rtc_cycles_per_second; - -#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC)) - -#define rtc_time() (*RTC_COUNTER_ADDR) - -#endif /* _ASM_IA64_SN_CLKSUPPORT_H */ diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h deleted file mode 100644 index f083c9434066..000000000000 --- a/arch/ia64/include/asm/sn/geo.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_GEO_H -#define _ASM_IA64_SN_GEO_H - -/* The geoid_t implementation below is based loosely on the pcfg_t - implementation in sys/SN/promcfg.h. */ - -/* Type declaractions */ - -/* Size of a geoid_t structure (must be before decl. of geoid_u) */ -#define GEOID_SIZE 8 /* Would 16 be better? The size can - be different on different platforms. */ - -#define MAX_SLOTS 0xf /* slots per module */ -#define MAX_SLABS 0xf /* slabs per slot */ - -typedef unsigned char geo_type_t; - -/* Fields common to all substructures */ -typedef struct geo_common_s { - moduleid_t module; /* The module (box) this h/w lives in */ - geo_type_t type; /* What type of h/w is named by this geoid_t */ - slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */ - slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */ -} geo_common_t; - -/* Additional fields for particular types of hardware */ -typedef struct geo_node_s { - geo_common_t common; /* No additional fields needed */ -} geo_node_t; - -typedef struct geo_rtr_s { - geo_common_t common; /* No additional fields needed */ -} geo_rtr_t; - -typedef struct geo_iocntl_s { - geo_common_t common; /* No additional fields needed */ -} geo_iocntl_t; - -typedef struct geo_pcicard_s { - geo_iocntl_t common; - char bus; /* Bus/widget number */ - char slot; /* PCI slot number */ -} geo_pcicard_t; - -/* Subcomponents of a node */ -typedef struct geo_cpu_s { - geo_node_t node; - char slice; /* Which CPU on the node */ -} geo_cpu_t; - -typedef struct geo_mem_s { - geo_node_t node; - char membus; /* The memory bus on the node */ - char memslot; /* The memory slot on the bus */ -} geo_mem_t; - - -typedef union geoid_u { - geo_common_t common; - geo_node_t node; - geo_iocntl_t iocntl; - geo_pcicard_t pcicard; - geo_rtr_t rtr; - geo_cpu_t cpu; - geo_mem_t mem; - char padsize[GEOID_SIZE]; -} geoid_t; - - -/* Preprocessor macros */ - -#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad: - module/001c07/slab/5/node/memory/2/slot/4 */ - -/* Values for geo_type_t */ -#define GEO_TYPE_INVALID 0 -#define GEO_TYPE_MODULE 1 -#define GEO_TYPE_NODE 2 -#define GEO_TYPE_RTR 3 -#define GEO_TYPE_IOCNTL 4 -#define GEO_TYPE_IOCARD 5 -#define GEO_TYPE_CPU 6 -#define GEO_TYPE_MEM 7 -#define GEO_TYPE_MAX (GEO_TYPE_MEM+1) - -/* Parameter for hwcfg_format_geoid_compt() */ -#define GEO_COMPT_MODULE 1 -#define GEO_COMPT_SLAB 2 -#define GEO_COMPT_IOBUS 3 -#define GEO_COMPT_IOSLOT 4 -#define GEO_COMPT_CPU 5 -#define GEO_COMPT_MEMBUS 6 -#define GEO_COMPT_MEMSLOT 7 - -#define GEO_INVALID_STR "<invalid>" - -#define INVALID_NASID ((nasid_t)-1) -#define INVALID_CNODEID ((cnodeid_t)-1) -#define INVALID_PNODEID ((pnodeid_t)-1) -#define INVALID_SLAB (slabid_t)-1 -#define INVALID_SLOT (slotid_t)-1 -#define INVALID_MODULE ((moduleid_t)-1) - -static inline slabid_t geo_slab(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_SLAB : g.common.slab; -} - -static inline slotid_t geo_slot(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_SLOT : g.common.slot; -} - -static inline moduleid_t geo_module(geoid_t g) -{ - return (g.common.type == GEO_TYPE_INVALID) ? - INVALID_MODULE : g.common.module; -} - -extern geoid_t cnodeid_get_geoid(cnodeid_t cnode); - -#endif /* _ASM_IA64_SN_GEO_H */ diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h index e0487aa97418..3885a77b21df 100644 --- a/arch/ia64/include/asm/sn/intr.h +++ b/arch/ia64/include/asm/sn/intr.h @@ -9,60 +9,7 @@ #ifndef _ASM_IA64_SN_INTR_H #define _ASM_IA64_SN_INTR_H -#include <linux/rcupdate.h> -#include <asm/sn/types.h> - -#define SGI_UART_VECTOR 0xe9 - -/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */ #define SGI_XPC_ACTIVATE 0x30 -#define SGI_II_ERROR 0x31 -#define SGI_XBOW_ERROR 0x32 -#define SGI_PCIASIC_ERROR 0x33 -#define SGI_ACPI_SCI_INT 0x34 -#define SGI_TIOCA_ERROR 0x35 -#define SGI_TIO_ERROR 0x36 -#define SGI_TIOCX_ERROR 0x37 -#define SGI_MMTIMER_VECTOR 0x38 #define SGI_XPC_NOTIFY 0xe7 -#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c -#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6 - -#define SN2_IRQ_RESERVED 0x1 -#define SN2_IRQ_CONNECTED 0x2 -#define SN2_IRQ_SHARED 0x4 - -// The SN PROM irq struct -struct sn_irq_info { - struct sn_irq_info *irq_next; /* deprecated DO NOT USE */ - short irq_nasid; /* Nasid IRQ is assigned to */ - int irq_slice; /* slice IRQ is assigned to */ - int irq_cpuid; /* kernel logical cpuid */ - int irq_irq; /* the IRQ number */ - int irq_int_bit; /* Bridge interrupt pin */ - /* <0 means MSI */ - u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */ - int irq_bridge_type;/* pciio asic type (pciio.h) */ - void *irq_bridge; /* bridge generating irq */ - void *irq_pciioinfo; /* associated pciio_info_t */ - int irq_last_intr; /* For Shub lb lost intr WAR */ - int irq_cookie; /* unique cookie */ - int irq_flags; /* flags */ - int irq_share_cnt; /* num devices sharing IRQ */ - struct list_head list; /* list of sn_irq_info structs */ - struct rcu_head rcu; /* rcu callback list */ -}; - -extern void sn_send_IPI_phys(int, long, int, int); -extern u64 sn_intr_alloc(nasid_t, int, - struct sn_irq_info *, - int, nasid_t, int); -extern void sn_intr_free(nasid_t, int, struct sn_irq_info *); -extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int); -extern void sn_set_err_irq_affinity(unsigned int); -extern struct list_head **sn_irq_lh; - -#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector) - #endif /* _ASM_IA64_SN_INTR_H */ diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h deleted file mode 100644 index 41c73a735628..000000000000 --- a/arch/ia64/include/asm/sn/io.h +++ /dev/null @@ -1,274 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_SN_IO_H -#define _ASM_SN_IO_H -#include <linux/compiler.h> -#include <asm/intrinsics.h> - -extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */ -extern void __sn_mmiowb(void); /* Forward definition */ - -extern int num_cnodes; - -#define __sn_mf_a() ia64_mfa() - -extern void sn_dma_flush(unsigned long); - -#define __sn_inb ___sn_inb -#define __sn_inw ___sn_inw -#define __sn_inl ___sn_inl -#define __sn_outb ___sn_outb -#define __sn_outw ___sn_outw -#define __sn_outl ___sn_outl -#define __sn_readb ___sn_readb -#define __sn_readw ___sn_readw -#define __sn_readl ___sn_readl -#define __sn_readq ___sn_readq -#define __sn_readb_relaxed ___sn_readb_relaxed -#define __sn_readw_relaxed ___sn_readw_relaxed -#define __sn_readl_relaxed ___sn_readl_relaxed -#define __sn_readq_relaxed ___sn_readq_relaxed - -/* - * Convenience macros for setting/clearing bits using the above accessors - */ - -#define __sn_setq_relaxed(addr, val) \ - writeq((__sn_readq_relaxed(addr) | (val)), (addr)) -#define __sn_clrq_relaxed(addr, val) \ - writeq((__sn_readq_relaxed(addr) & ~(val)), (addr)) - -/* - * The following routines are SN Platform specific, called when - * a reference is made to inX/outX set macros. SN Platform - * inX set of macros ensures that Posted DMA writes on the - * Bridge is flushed. - * - * The routines should be self explainatory. - */ - -static inline unsigned int -___sn_inb (unsigned long port) -{ - volatile unsigned char *addr; - unsigned char ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline unsigned int -___sn_inw (unsigned long port) -{ - volatile unsigned short *addr; - unsigned short ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline unsigned int -___sn_inl (unsigned long port) -{ - volatile unsigned int *addr; - unsigned int ret = -1; - - if ((addr = sn_io_addr(port))) { - ret = *addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - } - return ret; -} - -static inline void -___sn_outb (unsigned char val, unsigned long port) -{ - volatile unsigned char *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -static inline void -___sn_outw (unsigned short val, unsigned long port) -{ - volatile unsigned short *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -static inline void -___sn_outl (unsigned int val, unsigned long port) -{ - volatile unsigned int *addr; - - if ((addr = sn_io_addr(port))) { - *addr = val; - __sn_mmiowb(); - } -} - -/* - * The following routines are SN Platform specific, called when - * a reference is made to readX/writeX set macros. SN Platform - * readX set of macros ensures that Posted DMA writes on the - * Bridge is flushed. - * - * The routines should be self explainatory. - */ - -static inline unsigned char -___sn_readb (const volatile void __iomem *addr) -{ - unsigned char val; - - val = *(volatile unsigned char __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned short -___sn_readw (const volatile void __iomem *addr) -{ - unsigned short val; - - val = *(volatile unsigned short __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned int -___sn_readl (const volatile void __iomem *addr) -{ - unsigned int val; - - val = *(volatile unsigned int __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -static inline unsigned long -___sn_readq (const volatile void __iomem *addr) -{ - unsigned long val; - - val = *(volatile unsigned long __force *)addr; - __sn_mf_a(); - sn_dma_flush((unsigned long)addr); - return val; -} - -/* - * For generic and SN2 kernels, we have a set of fast access - * PIO macros. These macros are provided on SN Platform - * because the normal inX and readX macros perform an - * additional task of flushing Post DMA request on the Bridge. - * - * These routines should be self explainatory. - */ - -static inline unsigned int -sn_inb_fast (unsigned long port) -{ - volatile unsigned char *addr = (unsigned char *)port; - unsigned char ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned int -sn_inw_fast (unsigned long port) -{ - volatile unsigned short *addr = (unsigned short *)port; - unsigned short ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned int -sn_inl_fast (unsigned long port) -{ - volatile unsigned int *addr = (unsigned int *)port; - unsigned int ret; - - ret = *addr; - __sn_mf_a(); - return ret; -} - -static inline unsigned char -___sn_readb_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned char __force *)addr; -} - -static inline unsigned short -___sn_readw_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned short __force *)addr; -} - -static inline unsigned int -___sn_readl_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned int __force *) addr; -} - -static inline unsigned long -___sn_readq_relaxed (const volatile void __iomem *addr) -{ - return *(volatile unsigned long __force *) addr; -} - -struct pci_dev; - -static inline int -sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan) -{ - - if (vchan > 1) { - return -1; - } - - if (!(*addr >> 32)) /* Using a mask here would be cleaner */ - return 0; /* but this generates better code */ - - if (vchan == 1) { - /* Set Bit 57 */ - *addr |= (1UL << 57); - } else { - /* Clear Bit 57 */ - *addr &= ~(1UL << 57); - } - - return 0; -} - -#endif /* _ASM_SN_IO_H */ diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h deleted file mode 100644 index d4a524951df3..000000000000 --- a/arch/ia64/include/asm/sn/ioc3.h +++ /dev/null @@ -1,242 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2005 Silicon Graphics, Inc. - */ -#ifndef IA64_SN_IOC3_H -#define IA64_SN_IOC3_H - -/* serial port register map */ -struct ioc3_serialregs { - uint32_t sscr; - uint32_t stpir; - uint32_t stcir; - uint32_t srpir; - uint32_t srcir; - uint32_t srtr; - uint32_t shadow; -}; - -/* SUPERIO uart register map */ -struct ioc3_uartregs { - char iu_lcr; - union { - char iir; /* read only */ - char fcr; /* write only */ - } u3; - union { - char ier; /* DLAB == 0 */ - char dlm; /* DLAB == 1 */ - } u2; - union { - char rbr; /* read only, DLAB == 0 */ - char thr; /* write only, DLAB == 0 */ - char dll; /* DLAB == 1 */ - } u1; - char iu_scr; - char iu_msr; - char iu_lsr; - char iu_mcr; -}; - -#define iu_rbr u1.rbr -#define iu_thr u1.thr -#define iu_dll u1.dll -#define iu_ier u2.ier -#define iu_dlm u2.dlm -#define iu_iir u3.iir -#define iu_fcr u3.fcr - -struct ioc3_sioregs { - char fill[0x170]; - struct ioc3_uartregs uartb; - struct ioc3_uartregs uarta; -}; - -/* PCI IO/mem space register map */ -struct ioc3 { - uint32_t pci_id; - uint32_t pci_scr; - uint32_t pci_rev; - uint32_t pci_lat; - uint32_t pci_addr; - uint32_t pci_err_addr_l; - uint32_t pci_err_addr_h; - - uint32_t sio_ir; - /* these registers are read-only for general kernel code. To - * modify them use the functions in ioc3.c - */ - uint32_t sio_ies; - uint32_t sio_iec; - uint32_t sio_cr; - uint32_t int_out; - uint32_t mcr; - uint32_t gpcr_s; - uint32_t gpcr_c; - uint32_t gpdr; - uint32_t gppr[9]; - char fill[0x4c]; - - /* serial port registers */ - uint32_t sbbr_h; - uint32_t sbbr_l; - - struct ioc3_serialregs port_a; - struct ioc3_serialregs port_b; - char fill1[0x1ff10]; - /* superio registers */ - struct ioc3_sioregs sregs; -}; - -/* These don't exist on the ioc3 serial card... */ -#define eier fill1[8] -#define eisr fill1[4] - -#define PCI_LAT 0xc /* Latency Timer */ -#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */ -#define UARTA_BASE 0x178 -#define UARTB_BASE 0x170 - - -/* bitmasks for serial RX status byte */ -#define RXSB_OVERRUN 0x01 /* char(s) lost */ -#define RXSB_PAR_ERR 0x02 /* parity error */ -#define RXSB_FRAME_ERR 0x04 /* framing error */ -#define RXSB_BREAK 0x08 /* break character */ -#define RXSB_CTS 0x10 /* state of CTS */ -#define RXSB_DCD 0x20 /* state of DCD */ -#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */ -#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */ - -/* bitmasks for serial TX control byte */ -#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */ -#define TXCB_INVALID 0x00 /* byte is invalid */ -#define TXCB_VALID 0x40 /* byte is valid */ -#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */ -#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */ - -/* bitmasks for SBBR_L */ -#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */ - -/* bitmasks for SSCR_<A:B> */ -#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */ -#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */ -#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */ -#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */ -#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */ -#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */ -#define SSCR_DIAG 0x00200000 /* bypass clock divider */ -#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */ -#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */ -#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */ -#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/ -#define SSCR_RESET 0x80000000 /* reset DMA channels */ - -/* all producer/consumer pointers are the same bitfield */ -#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */ -#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */ -#define PROD_CONS_PTR_OFF 3 - -/* bitmasks for SRCIR_<A:B> */ -#define SRCIR_ARM 0x80000000 /* arm RX timer */ - -/* bitmasks for SHADOW_<A:B> */ -#define SHADOW_DR 0x00000001 /* data ready */ -#define SHADOW_OE 0x00000002 /* overrun error */ -#define SHADOW_PE 0x00000004 /* parity error */ -#define SHADOW_FE 0x00000008 /* framing error */ -#define SHADOW_BI 0x00000010 /* break interrupt */ -#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */ -#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */ -#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */ -#define SHADOW_DCTS 0x00010000 /* delta clear to send */ -#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */ -#define SHADOW_CTS 0x00100000 /* clear to send */ -#define SHADOW_DCD 0x00800000 /* data carrier detect */ -#define SHADOW_DTR 0x01000000 /* data terminal ready */ -#define SHADOW_RTS 0x02000000 /* request to send */ -#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */ -#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */ -#define SHADOW_LOOP 0x10000000 /* loopback enabled */ - -/* bitmasks for SRTR_<A:B> */ -#define SRTR_CNT 0x00000fff /* reload value for RX timer */ -#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */ -#define SRTR_CNT_VAL_SHIFT 16 -#define SRTR_HZ 16000 /* SRTR clock frequency */ - -/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */ -#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */ -#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */ -#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */ -#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */ -#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */ -#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */ -#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */ -#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */ -#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */ -#define SIO_IR_SB_TX_MT 0x00000200 -#define SIO_IR_SB_RX_FULL 0x00000400 -#define SIO_IR_SB_RX_HIGH 0x00000800 -#define SIO_IR_SB_RX_TIMER 0x00001000 -#define SIO_IR_SB_DELTA_DCD 0x00002000 -#define SIO_IR_SB_DELTA_CTS 0x00004000 -#define SIO_IR_SB_INT 0x00008000 -#define SIO_IR_SB_TX_EXPLICIT 0x00010000 -#define SIO_IR_SB_MEMERR 0x00020000 -#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */ -#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */ -#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */ -#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */ -#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */ -#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */ -#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */ -#define SIO_IR_GEN_INT_SHIFT 28 - -/* per device interrupt masks */ -#define SIO_IR_SA (SIO_IR_SA_TX_MT | \ - SIO_IR_SA_RX_FULL | \ - SIO_IR_SA_RX_HIGH | \ - SIO_IR_SA_RX_TIMER | \ - SIO_IR_SA_DELTA_DCD | \ - SIO_IR_SA_DELTA_CTS | \ - SIO_IR_SA_INT | \ - SIO_IR_SA_TX_EXPLICIT | \ - SIO_IR_SA_MEMERR) - -#define SIO_IR_SB (SIO_IR_SB_TX_MT | \ - SIO_IR_SB_RX_FULL | \ - SIO_IR_SB_RX_HIGH | \ - SIO_IR_SB_RX_TIMER | \ - SIO_IR_SB_DELTA_DCD | \ - SIO_IR_SB_DELTA_CTS | \ - SIO_IR_SB_INT | \ - SIO_IR_SB_TX_EXPLICIT | \ - SIO_IR_SB_MEMERR) - -#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \ - SIO_IR_PP_INTB | SIO_IR_PP_MEMERR) -#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1) - -/* bitmasks for SIO_CR */ -#define SIO_CR_CMD_PULSE_SHIFT 15 -#define SIO_CR_SER_A_BASE_SHIFT 1 -#define SIO_CR_SER_B_BASE_SHIFT 8 -#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */ -#define SIO_CR_ARB_DIAG_TXA 0x00000000 -#define SIO_CR_ARB_DIAG_RXA 0x00080000 -#define SIO_CR_ARB_DIAG_TXB 0x00100000 -#define SIO_CR_ARB_DIAG_RXB 0x00180000 -#define SIO_CR_ARB_DIAG_PP 0x00200000 -#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */ - -/* defs for some of the generic I/O pins */ -#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */ -#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */ -#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */ - -#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */ -#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */ -#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */ - -#endif /* IA64_SN_IOC3_H */ diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h deleted file mode 100644 index bcbf209d63be..000000000000 --- a/arch/ia64/include/asm/sn/klconfig.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from IRIX <sys/SN/klconfig.h>. - * - * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_IA64_SN_KLCONFIG_H -#define _ASM_IA64_SN_KLCONFIG_H - -/* - * The KLCONFIG structures store info about the various BOARDs found - * during Hardware Discovery. In addition, it stores info about the - * components found on the BOARDs. - */ - -typedef s32 klconf_off_t; - - -/* Functions/macros needed to use this structure */ - -typedef struct kl_config_hdr { - char pad[20]; - klconf_off_t ch_board_info; /* the link list of boards */ - char pad0[88]; -} kl_config_hdr_t; - - -#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off))) - -/* - * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD - * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to - * the LOCAL/current NODE. REMOTE means it is attached to a different - * node.(TBD - Need a way to treat ROUTER boards.) - * - * There are 2 different structures to represent these boards - - * lboard - Local board, rboard - remote board. These 2 structures - * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer - * Figure below). The first byte of the rboard or lboard structure - * is used to find out its type - no unions are used. - * If it is a lboard, then the config info of this board will be found - * on the local node. (LOCAL NODE BASE + offset value gives pointer to - * the structure. - * If it is a rboard, the local structure contains the node number - * and the offset of the beginning of the LINKED LIST on the remote node. - * The details of the hardware on a remote node can be built locally, - * if required, by reading the LINKED LIST on the remote node and - * ignoring all the rboards on that node. - * - * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the - * First board info on the remote node. The remote node list is - * traversed as the local list, using the REMOTE BASE ADDRESS and not - * the local base address and ignoring all rboard values. - * - * - KLCONFIG - - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ - - - +------------+ - | board info | - +------------+ +--------------------------------+ - | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ - | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ - | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ - - * - * Each BOARD consists of COMPONENTs and the BOARD structure has - * pointers (offsets) to its COMPONENT structure. - * The COMPONENT structure has version info, size and speed info, revision, - * error info and the NIC info. This structure can accommodate any - * BOARD with arbitrary COMPONENT composition. - * - * The ERRORINFO part of each BOARD has error information - * that describes errors about the BOARD itself. It also has flags to - * indicate the COMPONENT(s) on the board that have errors. The error - * information specific to the COMPONENT is present in the respective - * COMPONENT structure. - * - * The ERRORINFO structure is also treated like a COMPONENT, ie. the - * BOARD has pointers(offset) to the ERRORINFO structure. The rboard - * structure also has a pointer to the ERRORINFO structure. This is - * the place to store ERRORINFO about a REMOTE NODE, if the HUB on - * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where - * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can - * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info - * which is present on the REMOTE NODE.(TBD) - * REMOTE ERRINFO can be stored on any of the nearest nodes - * or on all the nearest nodes.(TBD) - * Like BOARD structures, REMOTE ERRINFO structures can be built locally - * using the rboard errinfo pointer. - * - * In order to get useful information from this Data organization, a set of - * interface routines are provided (TBD). The important thing to remember while - * manipulating the structures, is that, the NODE number information should - * be used. If the NODE is non-zero (remote) then each offset should - * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. - * This includes offsets for BOARDS, COMPONENTS and ERRORINFO. - * - * Note that these structures do not provide much info about connectivity. - * That info will be part of HWGRAPH, which is an extension of the cfg_t - * data structure. (ref IP27prom/cfg.h) It has to be extended to include - * the IO part of the Network(TBD). - * - * The data structures below define the above concepts. - */ - - -/* - * BOARD classes - */ - -#define KLCLASS_MASK 0xf0 -#define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ -#define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI - and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ -#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */ -#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */ - -#define KLCLASS(_x) ((_x) & KLCLASS_MASK) - - -/* - * board types - */ - -#define KLTYPE_MASK 0x0f -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) - -#define KLTYPE_SNIA (KLCLASS_CPU | 0x1) -#define KLTYPE_TIO (KLCLASS_CPU | 0x2) - -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) -#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4) - -#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) - -#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) -#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4) -#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6) -#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7) -#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8) -#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9) -#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa) -#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb) -#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc) -#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd) - - -/* - * board structures - */ - -#define MAX_COMPTS_PER_BRD 24 - -typedef struct lboard_s { - klconf_off_t brd_next_any; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - geoid_t brd_geoid; /* geo id */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ - struct lboard_s *brd_parent; /* Logical parent for this brd */ - char pad0[4]; - unsigned char brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ - char pad1[24]; /* future expansion */ - char brd_name[32]; - nasid_t brd_next_same_host; /* host of next brd w/same nasid */ - klconf_off_t brd_next_same; /* Next BOARD with same nasid */ -} lboard_t; - -/* - * Generic info structure. This stores common info about a - * component. - */ - -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - unsigned short partid; /* widget part number */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ - char pad1; /* pad out structure. */ - char pad2; /* pad out structure. */ - void *data; - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ -} klinfo_t ; - - -static inline lboard_t *find_lboard_next(lboard_t * brd) -{ - if (brd && brd->brd_next_any) - return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any); - return NULL; -} - -#endif /* _ASM_IA64_SN_KLCONFIG_H */ diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h deleted file mode 100644 index 344bf44bb356..000000000000 --- a/arch/ia64/include/asm/sn/l1.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved. - */ - -#ifndef _ASM_IA64_SN_L1_H -#define _ASM_IA64_SN_L1_H - -/* brick type response codes */ -#define L1_BRICKTYPE_PX 0x23 /* # */ -#define L1_BRICKTYPE_PE 0x25 /* % */ -#define L1_BRICKTYPE_N_p0 0x26 /* & */ -#define L1_BRICKTYPE_IP45 0x34 /* 4 */ -#define L1_BRICKTYPE_IP41 0x35 /* 5 */ -#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */ -#define L1_BRICKTYPE_IX 0x3d /* = */ -#define L1_BRICKTYPE_IP34 0x61 /* a */ -#define L1_BRICKTYPE_GA 0x62 /* b */ -#define L1_BRICKTYPE_C 0x63 /* c */ -#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */ -#define L1_BRICKTYPE_I 0x69 /* i */ -#define L1_BRICKTYPE_N 0x6e /* n */ -#define L1_BRICKTYPE_OPUS 0x6f /* o */ -#define L1_BRICKTYPE_P 0x70 /* p */ -#define L1_BRICKTYPE_R 0x72 /* r */ -#define L1_BRICKTYPE_CHI_CG 0x76 /* v */ -#define L1_BRICKTYPE_X 0x78 /* x */ -#define L1_BRICKTYPE_X2 0x79 /* y */ -#define L1_BRICKTYPE_SA 0x5e /* ^ */ -#define L1_BRICKTYPE_PA 0x6a /* j */ -#define L1_BRICKTYPE_IA 0x6b /* k */ -#define L1_BRICKTYPE_ATHENA 0x2b /* + */ -#define L1_BRICKTYPE_DAYTONA 0x7a /* z */ -#define L1_BRICKTYPE_1932 0x2c /* . */ -#define L1_BRICKTYPE_191010 0x2e /* , */ - -/* board type response codes */ -#define L1_BOARDTYPE_IP69 0x0100 /* CA */ -#define L1_BOARDTYPE_IP63 0x0200 /* CB */ -#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */ -#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */ -#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */ -#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */ -#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */ -#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */ -#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */ - -#endif /* _ASM_IA64_SN_L1_H */ diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h deleted file mode 100644 index 66cf8c4d92c9..000000000000 --- a/arch/ia64/include/asm/sn/leds.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_LEDS_H -#define _ASM_IA64_SN_LEDS_H - -#include <asm/sn/addrs.h> -#include <asm/sn/pda.h> -#include <asm/sn/shub_mmr.h> - -#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0)) -#define LED_CPU_SHIFT 16 - -#define LED_CPU_HEARTBEAT 0x01 -#define LED_CPU_ACTIVITY 0x02 -#define LED_ALWAYS_SET 0x00 - -/* - * Basic macros for flashing the LEDS on an SGI SN. - */ - -static __inline__ void -set_led_bits(u8 value, u8 mask) -{ - pda->led_state = (pda->led_state & ~mask) | (value & mask); - *pda->led_address = (short) pda->led_state; -} - -#endif /* _ASM_IA64_SN_LEDS_H */ - diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h deleted file mode 100644 index 734e980ece2f..000000000000 --- a/arch/ia64/include/asm/sn/module.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_MODULE_H -#define _ASM_IA64_SN_MODULE_H - -/* parameter for format_module_id() */ -#define MODULE_FORMAT_BRIEF 1 -#define MODULE_FORMAT_LONG 2 -#define MODULE_FORMAT_LCD 3 - -/* - * Module id format - * - * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int) - * 15-8 Brick type (8-bit ascii character) - * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int) - * - */ - -/* - * Macros for getting the brick type - */ -#define MODULE_BTYPE_MASK 0xff00 -#define MODULE_BTYPE_SHFT 8 -#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT) -#define MODULE_BT_TO_CHAR(_b) ((char)(_b)) -#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m))) - -/* - * Macros for getting the rack ID. - */ -#define MODULE_RACK_MASK 0xffff0000 -#define MODULE_RACK_SHFT 16 -#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT) - -/* - * Macros for getting the brick position - */ -#define MODULE_BPOS_MASK 0x00ff -#define MODULE_BPOS_SHFT 0 -#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT) - -/* - * Macros for encoding and decoding rack IDs - * A rack number consists of three parts: - * class (0==CPU/mixed, 1==I/O), group, number - * - * Rack number is stored just as it is displayed on the screen: - * a 3-decimal-digit number. - */ -#define RACK_CLASS_DVDR 100 -#define RACK_GROUP_DVDR 10 -#define RACK_NUM_DVDR 1 - -#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \ - (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR) - -#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR) -#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \ - RACK_CLASS_DVDR) / RACK_GROUP_DVDR) -#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \ - RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \ - RACK_GROUP_DVDR) / RACK_NUM_DVDR) - -/* - * Macros for encoding and decoding rack IDs - * A rack number consists of three parts: - * class 1 bit, 0==CPU/mixed, 1==I/O - * group 2 bits for CPU/mixed, 3 bits for I/O - * number 3 bits for CPU/mixed, 2 bits for I/O (1 based) - */ -#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2) -#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3) - -#define RACK_CLASS_MASK(_r) 0x20 -#define RACK_CLASS_SHFT(_r) 5 -#define RACK_ADD_CLASS(_r, _c) \ - ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r)) - -#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r) -#define RACK_GROUP_MASK(_r) \ - ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) ) -#define RACK_ADD_GROUP(_r, _g) \ - ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r)) - -#define RACK_NUM_SHFT(_r) 0 -#define RACK_NUM_MASK(_r) \ - ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) ) -#define RACK_ADD_NUM(_r, _n) \ - ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r)) - - -/* - * Brick type definitions - */ -#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */ - -extern char brick_types[]; - -#define MODULE_CBRICK 0 -#define MODULE_RBRICK 1 -#define MODULE_IBRICK 2 -#define MODULE_KBRICK 3 -#define MODULE_XBRICK 4 -#define MODULE_DBRICK 5 -#define MODULE_PBRICK 6 -#define MODULE_NBRICK 7 -#define MODULE_PEBRICK 8 -#define MODULE_PXBRICK 9 -#define MODULE_IXBRICK 10 -#define MODULE_CGBRICK 11 -#define MODULE_OPUSBRICK 12 -#define MODULE_SABRICK 13 /* TIO BringUp Brick */ -#define MODULE_IABRICK 14 -#define MODULE_PABRICK 15 -#define MODULE_GABRICK 16 -#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */ - -extern char brick_types[]; -extern void format_module_id(char *, moduleid_t, int); - -#endif /* _ASM_IA64_SN_MODULE_H */ diff --git a/arch/ia64/include/asm/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h deleted file mode 100644 index c1d3c50c3223..000000000000 --- a/arch/ia64/include/asm/sn/mspec.h +++ /dev/null @@ -1,59 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_MSPEC_H -#define _ASM_IA64_SN_MSPEC_H - -#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */ - -#define FETCHOP_LOAD 0 -#define FETCHOP_INCREMENT 8 -#define FETCHOP_DECREMENT 16 -#define FETCHOP_CLEAR 24 - -#define FETCHOP_STORE 0 -#define FETCHOP_AND 24 -#define FETCHOP_OR 32 - -#define FETCHOP_CLEAR_CACHE 56 - -#define FETCHOP_LOAD_OP(addr, op) ( \ - *(volatile long *)((char*) (addr) + (op))) - -#define FETCHOP_STORE_OP(addr, op, x) ( \ - *(volatile long *)((char*) (addr) + (op)) = (long) (x)) - -#ifdef __KERNEL__ - -/* - * Each Atomic Memory Operation (amo, formerly known as fetchop) - * variable is 64 bytes long. The first 8 bytes are used. The - * remaining 56 bytes are unaddressable due to the operation taking - * that portion of the address. - * - * NOTE: The amo structure _MUST_ be placed in either the first or second - * half of the cache line. The cache line _MUST NOT_ be used for anything - * other than additional amo entries. This is because there are two - * addresses which reference the same physical cache line. One will - * be a cached entry with the memory type bits all set. This address - * may be loaded into processor cache. The amo will be referenced - * uncached via the memory special memory type. If any portion of the - * cached cache-line is modified, when that line is flushed, it will - * overwrite the uncached value in physical memory and lead to - * inconsistency. - */ -struct amo { - u64 variable; - u64 unused[7]; -}; - - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IA64_SN_MSPEC_H */ diff --git a/arch/ia64/include/asm/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h deleted file mode 100644 index 7c8b4710f071..000000000000 --- a/arch/ia64/include/asm/sn/nodepda.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_NODEPDA_H -#define _ASM_IA64_SN_NODEPDA_H - - -#include <asm/irq.h> -#include <asm/sn/arch.h> -#include <asm/sn/intr.h> -#include <asm/sn/bte.h> - -/* - * NUMA Node-Specific Data structures are defined in this file. - * In particular, this is the location of the node PDA. - * A pointer to the right node PDA is saved in each CPU PDA. - */ - -/* - * Node-specific data structure. - * - * One of these structures is allocated on each node of a NUMA system. - * - * This structure provides a convenient way of keeping together - * all per-node data structures. - */ -struct phys_cpuid { - short nasid; - char subnode; - char slice; -}; - -struct nodepda_s { - void *pdinfo; /* Platform-dependent per-node info */ - - /* - * The BTEs on this node are shared by the local cpus - */ - struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */ - struct timer_list bte_recovery_timer; - spinlock_t bte_recovery_lock; - - /* - * Array of pointers to the nodepdas for each node. - */ - struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES]; - - /* - * Array of physical cpu identifiers. Indexed by cpuid. - */ - struct phys_cpuid phys_cpuid[NR_CPUS]; - spinlock_t ptc_lock ____cacheline_aligned_in_smp; -}; - -typedef struct nodepda_s nodepda_t; - -/* - * Access Functions for node PDA. - * Since there is one nodepda for each node, we need a convenient mechanism - * to access these nodepdas without cluttering code with #ifdefs. - * The next set of definitions provides this. - * Routines are expected to use - * - * sn_nodepda - to access node PDA for the node on which code is running - * NODEPDA(cnodeid) - to access node PDA for cnodeid - */ - -DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda); -#define sn_nodepda __this_cpu_read(__sn_nodepda) -#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid]) - -/* - * Check if given a compact node id the corresponding node has all the - * cpus disabled. - */ -#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0) - -#endif /* _ASM_IA64_SN_NODEPDA_H */ diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h deleted file mode 100644 index da205b7cdaac..000000000000 --- a/arch/ia64/include/asm/sn/pcibr_provider.h +++ /dev/null @@ -1,150 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H -#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H - -#include <asm/sn/intr.h> -#include <asm/sn/pcibus_provider_defs.h> - -/* Workarounds */ -#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */ - -#define BUSTYPE_MASK 0x1 - -/* Macros given a pcibus structure */ -#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK) -#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \ - asic == PCIIO_ASIC_TYPE_TIOCP) -#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC) -#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP) - - -/* - * The different PCI Bridge types supported on the SGI Altix platforms - */ -#define PCIBR_BRIDGETYPE_UNKNOWN -1 -#define PCIBR_BRIDGETYPE_PIC 2 -#define PCIBR_BRIDGETYPE_TIOCP 3 - -/* - * Bridge 64bit Direct Map Attributes - */ -#define PCI64_ATTR_PREF (1ull << 59) -#define PCI64_ATTR_PREC (1ull << 58) -#define PCI64_ATTR_VIRTUAL (1ull << 57) -#define PCI64_ATTR_BAR (1ull << 56) -#define PCI64_ATTR_SWAP (1ull << 55) -#define PCI64_ATTR_VIRTUAL1 (1ull << 54) - -#define PCI32_LOCAL_BASE 0 -#define PCI32_MAPPED_BASE 0x40000000 -#define PCI32_DIRECT_BASE 0x80000000 - -#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \ - (u64)(x) >= PCI32_MAPPED_BASE) -#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE) - - -/* - * Bridge PMU Address Transaltion Entry Attibutes - */ -#define PCI32_ATE_V (0x1 << 0) -#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */ -#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */ -#define PCI32_ATE_MSI (0x1 << 2) -#define PCI32_ATE_PREF (0x1 << 3) -#define PCI32_ATE_BAR (0x1 << 4) -#define PCI32_ATE_ADDR_SHFT 12 - -#define MINIMAL_ATES_REQUIRED(addr, size) \ - (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1)) - -#define MINIMAL_ATE_FLAG(addr, size) \ - (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0) - -/* bit 29 of the pci address is the SWAP bit */ -#define ATE_SWAPSHIFT 29 -#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT)) -#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT)) - -/* - * I/O page size - */ -#if PAGE_SIZE < 16384 -#define IOPFNSHIFT 12 /* 4K per mapped page */ -#else -#define IOPFNSHIFT 14 /* 16K per mapped page */ -#endif - -#define IOPGSIZE (1 << IOPFNSHIFT) -#define IOPG(x) ((x) >> IOPFNSHIFT) -#define IOPGOFF(x) ((x) & (IOPGSIZE-1)) - -#define PCIBR_DEV_SWAP_DIR (1ull << 19) -#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21) - -/* - * PMU resources. - */ -struct ate_resource{ - u64 *ate; - u64 num_ate; - u64 lowest_free_index; -}; - -struct pcibus_info { - struct pcibus_bussoft pbi_buscommon; /* common header */ - u32 pbi_moduleid; - short pbi_bridge_type; - short pbi_bridge_mode; - - struct ate_resource pbi_int_ate_resource; - u64 pbi_int_ate_size; - - u64 pbi_dir_xbase; - char pbi_hub_xid; - - u64 pbi_devreg[8]; - - u32 pbi_valid_devices; - u32 pbi_enabled_devices; - - spinlock_t pbi_lock; -}; - -extern int pcibr_init_provider(void); -extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *); -extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type); -extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type); -extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int); - -/* - * prototypes for the bridge asic register access routines in pcibr_reg.c - */ -extern void pcireg_control_bit_clr(struct pcibus_info *, u64); -extern void pcireg_control_bit_set(struct pcibus_info *, u64); -extern u64 pcireg_tflush_get(struct pcibus_info *); -extern u64 pcireg_intr_status_get(struct pcibus_info *); -extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64); -extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64); -extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64); -extern void pcireg_force_intr_set(struct pcibus_info *, int); -extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int); -extern void pcireg_int_ate_set(struct pcibus_info *, int, u64); -extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int); -extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info); -extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info); -extern int pcibr_ate_alloc(struct pcibus_info *, int); -extern void pcibr_ate_free(struct pcibus_info *, int); -extern void ate_write(struct pcibus_info *, int, int, u64); -extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device, - void *resp, char **ssdt); -extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device, - int action, void *resp); -extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus); -#endif diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h deleted file mode 100644 index 8f7c83d0f6d3..000000000000 --- a/arch/ia64/include/asm/sn/pcibus_provider_defs.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H -#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H - -/* - * SN pci asic types. Do not ever renumber these or reuse values. The - * values must agree with what prom thinks they are. - */ - -#define PCIIO_ASIC_TYPE_UNKNOWN 0 -#define PCIIO_ASIC_TYPE_PPB 1 -#define PCIIO_ASIC_TYPE_PIC 2 -#define PCIIO_ASIC_TYPE_TIOCP 3 -#define PCIIO_ASIC_TYPE_TIOCA 4 -#define PCIIO_ASIC_TYPE_TIOCE 5 - -#define PCIIO_ASIC_MAX_TYPES 6 - -/* - * Common pciio bus provider data. There should be one of these as the - * first field in any pciio based provider soft structure (e.g. pcibr_soft - * tioca_soft, etc). - */ - -struct pcibus_bussoft { - u32 bs_asic_type; /* chipset type */ - u32 bs_xid; /* xwidget id */ - u32 bs_persist_busnum; /* Persistent Bus Number */ - u32 bs_persist_segment; /* Segment Number */ - u64 bs_legacy_io; /* legacy io pio addr */ - u64 bs_legacy_mem; /* legacy mem pio addr */ - u64 bs_base; /* widget base */ - struct xwidget_info *bs_xwidget_info; -}; - -struct pci_controller; -/* - * SN pci bus indirection - */ - -struct sn_pcibus_provider { - dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags); - dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags); - void (*dma_unmap)(struct pci_dev *, dma_addr_t, int); - void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *); - void (*force_interrupt)(struct sn_irq_info *); - void (*target_interrupt)(struct sn_irq_info *); -}; - -/* - * Flags used by the map interfaces - * bits 3:0 specifies format of passed in address - * bit 4 specifies that address is to be used for MSI - */ - -#define SN_DMA_ADDRTYPE(x) ((x) & 0xf) -#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */ -#define SN_DMA_ADDR_XIO 2 /* address is phys memory */ -#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */ - -extern struct sn_pcibus_provider *sn_pci_provider[]; -#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h deleted file mode 100644 index 1c2382cea807..000000000000 --- a/arch/ia64/include/asm/sn/pcidev.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PCIDEV_H -#define _ASM_IA64_SN_PCI_PCIDEV_H - -#include <linux/pci.h> - -/* - * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to - * the pcidev_info structs for all devices under a controller, we keep a - * list of pcidev_info under pci_controller->platform_data. - */ -struct sn_platform_data { - void *provider_soft; - struct list_head pcidev_info; -}; - -#define SN_PLATFORM_DATA(busdev) \ - ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data)) - -#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev) - -/* - * Given a pci_bus, return the sn pcibus_bussoft struct. Note that - * this only works for root busses, not for busses represented by PPB's. - */ - -#define SN_PCIBUS_BUSSOFT(pci_bus) \ - ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) - -#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \ - ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft)) -/* - * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note - * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due - * due to possible PPB's in the path. - */ - -#define SN_PCIDEV_BUSSOFT(pci_dev) \ - (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info) - -#define SN_PCIDEV_BUSPROVIDER(pci_dev) \ - (SN_PCIDEV_INFO(pci_dev)->pdi_provider) - -#define PCIIO_BUS_NONE 255 /* bus 255 reserved */ -#define PCIIO_SLOT_NONE 255 -#define PCIIO_FUNC_NONE 255 -#define PCIIO_VENDOR_ID_NONE (-1) - -struct pcidev_info { - u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */ - u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */ - - struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */ - struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */ - struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */ - - struct sn_irq_info *pdi_sn_irq_info; - struct sn_pcibus_provider *pdi_provider; /* sn pci ops */ - struct pci_dev *host_pci_dev; /* host bus link */ - struct list_head pdi_list; /* List of pcidev_info */ -}; - -extern void sn_irq_fixup(struct pci_dev *pci_dev, - struct sn_irq_info *sn_irq_info); -extern void sn_irq_unfixup(struct pci_dev *pci_dev); -extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *); -extern void sn_bus_fixup(struct pci_bus *); -extern void sn_acpi_bus_fixup(struct pci_bus *); -extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *); -extern void sn_bus_store_sysdata(struct pci_dev *dev); -extern void sn_bus_free_sysdata(void); -extern void sn_generate_path(struct pci_bus *pci_bus, char *address); -extern void sn_io_slot_fixup(struct pci_dev *); -extern void sn_acpi_slot_fixup(struct pci_dev *); -extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *, - struct sn_irq_info *); -extern void sn_pci_unfixup_slot(struct pci_dev *dev); -extern void sn_irq_lh_init(void); -#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */ diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h deleted file mode 100644 index 22ae358c8d16..000000000000 --- a/arch/ia64/include/asm/sn/pda.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PDA_H -#define _ASM_IA64_SN_PDA_H - -#include <linux/cache.h> -#include <asm/percpu.h> - - -/* - * CPU-specific data structure. - * - * One of these structures is allocated for each cpu of a NUMA system. - * - * This structure provides a convenient way of keeping together - * all SN per-cpu data structures. - */ - -typedef struct pda_s { - - /* - * Support for SN LEDs - */ - volatile short *led_address; - u8 led_state; - u8 hb_state; /* supports blinking heartbeat leds */ - unsigned int hb_count; - - unsigned int idle_flag; - - volatile unsigned long *bedrock_rev_id; - volatile unsigned long *pio_write_status_addr; - unsigned long pio_write_status_val; - volatile unsigned long *pio_shub_war_cam_addr; - - unsigned long sn_in_service_ivecs[4]; - int sn_lb_int_war_ticks; - int sn_last_irq; - int sn_first_irq; -} pda_t; - - -#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1)) - -/* - * PDA - * Per-cpu private data area for each cpu. The PDA is located immediately after - * the IA64 cpu_data area. A full page is allocated for the cp_data area for each - * cpu but only a small amout of the page is actually used. We put the SNIA PDA - * in the same page as the cpu_data area. Note that there is a check in the setup - * code to verify that we don't overflow the page. - * - * Seems like we should should cache-line align the pda so that any changes in the - * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128 - * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later. - */ -DECLARE_PER_CPU(struct pda_s, pda_percpu); - -#define pda (&__ia64_per_cpu_var(pda_percpu)) - -#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu)) - -#endif /* _ASM_IA64_SN_PDA_H */ diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h deleted file mode 100644 index 5f9da5fd6e56..000000000000 --- a/arch/ia64/include/asm/sn/pic.h +++ /dev/null @@ -1,261 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_PIC_H -#define _ASM_IA64_SN_PCI_PIC_H - -/* - * PIC AS DEVICE ZERO - * ------------------ - * - * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC) - * be designated as 'device 0'. That is a departure from earlier SGI - * PCI bridges. Because of that we use config space 1 to access the - * config space of the first actual PCI device on the bus. - * Here's what the PIC manual says: - * - * The current PCI-X bus specification now defines that the parent - * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC - * reduced the total number of devices from 8 to 4 and removed the - * device registers and windows, now only supporting devices 0,1,2, and - * 3. PIC did leave all 8 configuration space windows. The reason was - * there was nothing to gain by removing them. Here in lies the problem. - * The device numbering we do using 0 through 3 is unrelated to the device - * numbering which PCI-X requires in configuration space. In the past we - * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc. - * PCI-X requires we start a 1, not 0 and currently the PX brick - * does associate our: - * - * device 0 with configuration space window 1, - * device 1 with configuration space window 2, - * device 2 with configuration space window 3, - * device 3 with configuration space window 4. - * - * The net effect is that all config space access are off-by-one with - * relation to other per-slot accesses on the PIC. - * Here is a table that shows some of that: - * - * Internal Slot# - * | - * | 0 1 2 3 - * ----------|--------------------------------------- - * config | 0x21000 0x22000 0x23000 0x24000 - * | - * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd - * | - * odd rrb | n/a 0[1] n/a 1[1] - * | - * int dev | 00 01 10 11 - * | - * ext slot# | 1 2 3 4 - * ----------|--------------------------------------- - */ - -#define PIC_ATE_TARGETID_SHFT 8 -#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL -#define PIC_PCI64_ATTR_TARG_SHFT 60 - - -/***************************************************************************** - *********************** PIC MMR structure mapping *************************** - *****************************************************************************/ - -/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0] - * of a 64-bit register. When writing PIC registers, always write the - * entire 64 bits. - */ - -struct pic { - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- Standard Widget Configuration */ - u64 p_wid_id; /* 0x000000 */ - u64 p_wid_stat; /* 0x000008 */ - u64 p_wid_err_upper; /* 0x000010 */ - u64 p_wid_err_lower; /* 0x000018 */ - #define p_wid_err p_wid_err_lower - u64 p_wid_control; /* 0x000020 */ - u64 p_wid_req_timeout; /* 0x000028 */ - u64 p_wid_int_upper; /* 0x000030 */ - u64 p_wid_int_lower; /* 0x000038 */ - #define p_wid_int p_wid_int_lower - u64 p_wid_err_cmdword; /* 0x000040 */ - u64 p_wid_llp; /* 0x000048 */ - u64 p_wid_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */ - u64 p_wid_aux_err; /* 0x000058 */ - u64 p_wid_resp_upper; /* 0x000060 */ - u64 p_wid_resp_lower; /* 0x000068 */ - #define p_wid_resp p_wid_resp_lower - u64 p_wid_tst_pin_ctrl; /* 0x000070 */ - u64 p_wid_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - u64 p_dir_map; /* 0x000080 */ - u64 _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - u64 p_map_fault; /* 0x000090 */ - u64 _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - u64 p_arb; /* 0x0000A0 */ - u64 _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - u64 p_ate_parity_err; /* 0x0000B0 */ - u64 _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - u64 p_bus_timeout; /* 0x0000C0 */ - u64 p_pci_cfg; /* 0x0000C8 */ - u64 p_pci_err_upper; /* 0x0000D0 */ - u64 p_pci_err_lower; /* 0x0000D8 */ - #define p_pci_err p_pci_err_lower - u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - u64 p_int_status; /* 0x000100 */ - u64 p_int_enable; /* 0x000108 */ - u64 p_int_rst_stat; /* 0x000110 */ - u64 p_int_mode; /* 0x000118 */ - u64 p_int_device; /* 0x000120 */ - u64 p_int_host_err; /* 0x000128 */ - u64 p_int_addr[8]; /* 0x0001{30,,,68} */ - u64 p_err_int_view; /* 0x000170 */ - u64 p_mult_int; /* 0x000178 */ - u64 p_force_always[8]; /* 0x0001{80,,,B8} */ - u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - u64 p_device[4]; /* 0x0002{00,,,18} */ - u64 _pad_000220[4]; /* 0x0002{20,,,38} */ - u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */ - u64 _pad_000260[4]; /* 0x0002{60,,,78} */ - u64 p_rrb_map[2]; /* 0x0002{80,,,88} */ - #define p_even_resp p_rrb_map[0] /* 0x000280 */ - #define p_odd_resp p_rrb_map[1] /* 0x000288 */ - u64 p_resp_status; /* 0x000290 */ - u64 p_resp_clear; /* 0x000298 */ - - u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - u64 upper; /* 0x0003{00,,,F0} */ - u64 lower; /* 0x0003{08,,,F8} */ - } p_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - u64 flush_w_touch; /* 0x000{400,,,5C0} */ - u64 flush_wo_touch; /* 0x000{408,,,5C8} */ - u64 inflight; /* 0x000{410,,,5D0} */ - u64 prefetch; /* 0x000{418,,,5D8} */ - u64 total_pci_retry; /* 0x000{420,,,5E0} */ - u64 max_pci_retry; /* 0x000{428,,,5E8} */ - u64 max_latency; /* 0x000{430,,,5F0} */ - u64 clear_all; /* 0x000{438,,,5F8} */ - } p_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - u64 p_pcix_bus_err_addr; /* 0x000600 */ - u64 p_pcix_bus_err_attr; /* 0x000608 */ - u64 p_pcix_bus_err_data; /* 0x000610 */ - u64 p_pcix_pio_split_addr; /* 0x000618 */ - u64 p_pcix_pio_split_attr; /* 0x000620 */ - u64 p_pcix_dma_req_err_attr; /* 0x000628 */ - u64 p_pcix_dma_req_err_addr; /* 0x000630 */ - u64 p_pcix_timeout; /* 0x000638 */ - - u64 _pad_000640[120]; /* 0x000{640,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - u64 p_buf_addr; /* 0x000{A00,,,AF0} */ - u64 p_buf_attr; /* 0X000{A08,,,AF8} */ - } p_pcix_read_buf_64[16]; - - struct { - u64 p_buf_addr; /* 0x000{B00,,,BE0} */ - u64 p_buf_attr; /* 0x000{B08,,,BE8} */ - u64 p_buf_valid; /* 0x000{B10,,,BF0} */ - u64 __pad1; /* 0x000{B18,,,BF8} */ - } p_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */ - u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */ - - /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */ - u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */ - - char _pad_014000[0x18000 - 0x014000]; - - /* 0x18000-0x197F8 -- PIC Write Request Ram */ - u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x20000 - 0x019800]; - - /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */ - union { - u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ - u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ - u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ - u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } p_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } p_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x030007 -- PCIX Special Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } p_pcix_cycle; /* 0x040000-0x040007 */ -}; - -#endif /* _ASM_IA64_SN_PCI_PIC_H */ diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h deleted file mode 100644 index 2d78f4c5a45e..000000000000 --- a/arch/ia64/include/asm/sn/rw_mmr.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved. - */ -#ifndef _ASM_IA64_SN_RW_MMR_H -#define _ASM_IA64_SN_RW_MMR_H - - -/* - * This file that access MMRs via uncached physical addresses. - * pio_phys_read_mmr - read an MMR - * pio_phys_write_mmr - write an MMR - * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0 - * Second MMR will be skipped if address is NULL - * - * Addresses passed to these routines should be uncached physical addresses - * ie., 0x80000.... - */ - - -extern long pio_phys_read_mmr(volatile long *mmr); -extern void pio_phys_write_mmr(volatile long *mmr, long val); -extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); - -#endif /* _ASM_IA64_SN_RW_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h deleted file mode 100644 index a84d870f4294..000000000000 --- a/arch/ia64/include/asm/sn/shub_mmr.h +++ /dev/null @@ -1,502 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SHUB_MMR_H -#define _ASM_IA64_SN_SHUB_MMR_H - -/* ==================================================================== */ -/* Register "SH_IPI_INT" */ -/* SHub Inter-Processor Interrupt Registers */ -/* ==================================================================== */ -#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380) -#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380) - -/* SH_IPI_INT_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_IPI_INT_TYPE_SHFT 0 -#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_IPI_INT_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_IPI_INT_AGT_SHFT 3 -#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_IPI_INT_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_IPI_INT_PID_SHFT 4 -#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_IPI_INT_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_IPI_INT_BASE_SHFT 21 -#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_IPI_INT_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_IPI_INT_IDX_SHFT 52 -#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* SH_IPI_INT_SEND */ -/* Description: Send Interrupt Message to PI, This generates a puls */ -#define SH_IPI_INT_SEND_SHFT 63 -#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000) - -/* ==================================================================== */ -/* Register "SH_EVENT_OCCURRED" */ -/* SHub Interrupt Event Occurred */ -/* ==================================================================== */ -#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000) -#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008) -#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000) -#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008) - -/* ==================================================================== */ -/* Register "SH_PI_CAM_CONTROL" */ -/* CRB CAM MMR Access Control */ -/* ==================================================================== */ -#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300) - -/* ==================================================================== */ -/* Register "SH_SHUB_ID" */ -/* SHub ID Number */ -/* ==================================================================== */ -#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580) -#define SH1_SHUB_ID_REVISION_SHFT 28 -#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000) - -/* ==================================================================== */ -/* Register "SH_RTC" */ -/* Real-time Clock */ -/* ==================================================================== */ -#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000) -#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000) -#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_PIO_WRITE_STATUS_0|1" */ -/* PIO Write Status for CPU 0 & 1 */ -/* ==================================================================== */ -#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200) -#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280) -#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200) -#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280) -#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300) -#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380) - -/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */ -/* Description: Deadlock response detected */ -#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1 -#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \ - __IA64_UL_CONST(0x0000000000000002) - -/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */ -/* Description: Count of currently pending PIO writes */ -#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56 -#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \ - __IA64_UL_CONST(0x3f00000000000000) - -/* ==================================================================== */ -/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */ -/* ==================================================================== */ -#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208) -#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208) - -/* ==================================================================== */ -/* Register "SH_EVENT_OCCURRED" */ -/* SHub Interrupt Event Occurred */ -/* ==================================================================== */ -/* SH_EVENT_OCCURRED_UART_INT */ -/* Description: Pending Junk Bus UART Interrupt */ -#define SH_EVENT_OCCURRED_UART_INT_SHFT 20 -#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000) - -/* SH_EVENT_OCCURRED_IPI_INT */ -/* Description: Pending IPI Interrupt */ -#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28 -#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000) - -/* SH_EVENT_OCCURRED_II_INT0 */ -/* Description: Pending II 0 Interrupt */ -#define SH_EVENT_OCCURRED_II_INT0_SHFT 29 -#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000) - -/* SH_EVENT_OCCURRED_II_INT1 */ -/* Description: Pending II 1 Interrupt */ -#define SH_EVENT_OCCURRED_II_INT1_SHFT 30 -#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000) - -/* SH2_EVENT_OCCURRED_EXTIO_INT2 */ -/* Description: Pending SHUB 2 EXT IO INT2 */ -#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33 -#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000) - -/* SH2_EVENT_OCCURRED_EXTIO_INT3 */ -/* Description: Pending SHUB 2 EXT IO INT3 */ -#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34 -#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000) - -#define SH_ALL_INT_MASK \ - (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \ - SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \ - SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \ - SH2_EVENT_OCCURRED_EXTIO_INT3_MASK) - - -/* ==================================================================== */ -/* LEDS */ -/* ==================================================================== */ -#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL -#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL -#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL -#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL - -#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL -#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL -#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL -#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL - -/* ==================================================================== */ -/* Register "SH1_PTC_0" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000) - -/* SH1_PTC_0_A */ -/* Description: Type */ -#define SH1_PTC_0_A_SHFT 0 - -/* SH1_PTC_0_PS */ -/* Description: Page Size */ -#define SH1_PTC_0_PS_SHFT 2 - -/* SH1_PTC_0_RID */ -/* Description: Region ID */ -#define SH1_PTC_0_RID_SHFT 8 - -/* SH1_PTC_0_START */ -/* Description: Start */ -#define SH1_PTC_0_START_SHFT 63 - -/* ==================================================================== */ -/* Register "SH1_PTC_1" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080) - -/* SH1_PTC_1_START */ -/* Description: PTC_1 Start */ -#define SH1_PTC_1_START_SHFT 63 - -/* ==================================================================== */ -/* Register "SH2_PTC" */ -/* Puge Translation Cache Message Configuration Information */ -/* ==================================================================== */ -#define SH2_PTC __IA64_UL_CONST(0x0000000170000000) - -/* SH2_PTC_A */ -/* Description: Type */ -#define SH2_PTC_A_SHFT 0 - -/* SH2_PTC_PS */ -/* Description: Page Size */ -#define SH2_PTC_PS_SHFT 2 - -/* SH2_PTC_RID */ -/* Description: Region ID */ -#define SH2_PTC_RID_SHFT 4 - -/* SH2_PTC_START */ -/* Description: Start */ -#define SH2_PTC_START_SHFT 63 - -/* SH2_PTC_ADDR_RID */ -/* Description: Region ID */ -#define SH2_PTC_ADDR_SHFT 4 -#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000) - -/* ==================================================================== */ -/* Register "SH_RTC1_INT_CONFIG" */ -/* SHub RTC 1 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480) -#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480) -#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC1_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC1_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC1_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC1_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC1_INT_CONFIG_PID_SHFT 4 -#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC1_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC1_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC1_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC1_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC1_INT_ENABLE" */ -/* SHub RTC 1 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500) -#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500) -#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */ -/* Description: Enable RTC 1 Interrupt */ -#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0 -#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* ==================================================================== */ -/* Register "SH_RTC2_INT_CONFIG" */ -/* SHub RTC 2 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580) -#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580) -#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC2_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC2_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC2_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC2_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC2_INT_CONFIG_PID_SHFT 4 -#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC2_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC2_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC2_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC2_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC2_INT_ENABLE" */ -/* SHub RTC 2 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600) -#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600) -#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */ -/* Description: Enable RTC 2 Interrupt */ -#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0 -#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* ==================================================================== */ -/* Register "SH_RTC3_INT_CONFIG" */ -/* SHub RTC 3 Interrupt Config Registers */ -/* ==================================================================== */ - -#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680) -#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680) -#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff) -#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC3_INT_CONFIG_TYPE */ -/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */ -#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0 -#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007) - -/* SH_RTC3_INT_CONFIG_AGT */ -/* Description: Agent, must be 0 for SHub */ -#define SH_RTC3_INT_CONFIG_AGT_SHFT 3 -#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008) - -/* SH_RTC3_INT_CONFIG_PID */ -/* Description: Processor ID, same setting as on targeted McKinley */ -#define SH_RTC3_INT_CONFIG_PID_SHFT 4 -#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0) - -/* SH_RTC3_INT_CONFIG_BASE */ -/* Description: Optional interrupt vector area, 2MB aligned */ -#define SH_RTC3_INT_CONFIG_BASE_SHFT 21 -#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000) - -/* SH_RTC3_INT_CONFIG_IDX */ -/* Description: Targeted McKinley interrupt vector */ -#define SH_RTC3_INT_CONFIG_IDX_SHFT 52 -#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000) - -/* ==================================================================== */ -/* Register "SH_RTC3_INT_ENABLE" */ -/* SHub RTC 3 Interrupt Enable Registers */ -/* ==================================================================== */ - -#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700) -#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700) -#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001) -#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */ -/* Description: Enable RTC 3 Interrupt */ -#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0 -#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \ - __IA64_UL_CONST(0x0000000000000001) - -/* SH_EVENT_OCCURRED_RTC1_INT */ -/* Description: Pending RTC 1 Interrupt */ -#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24 -#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000) - -/* SH_EVENT_OCCURRED_RTC2_INT */ -/* Description: Pending RTC 2 Interrupt */ -#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25 -#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000) - -/* SH_EVENT_OCCURRED_RTC3_INT */ -/* Description: Pending RTC 3 Interrupt */ -#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26 -#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000) - -/* ==================================================================== */ -/* Register "SH_IPI_ACCESS" */ -/* CPU interrupt Access Permission Bits */ -/* ==================================================================== */ - -#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480) -#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00) -#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80) -#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00) -#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80) - -/* ==================================================================== */ -/* Register "SH_INT_CMPB" */ -/* RTC Compare Value for Processor B */ -/* ==================================================================== */ - -#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080) -#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080) -#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPB_REAL_TIME_CMPB */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0 -#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_INT_CMPC" */ -/* RTC Compare Value for Processor C */ -/* ==================================================================== */ - -#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100) -#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100) -#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPC_REAL_TIME_CMPC */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 -#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_INT_CMPD" */ -/* RTC Compare Value for Processor D */ -/* ==================================================================== */ - -#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180) -#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180) -#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) -#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000) - -/* SH_INT_CMPD_REAL_TIME_CMPD */ -/* Description: Real Time Clock Compare */ -#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 -#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff) - -/* ==================================================================== */ -/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */ -/* privilege vector for acc=0 */ -/* ==================================================================== */ -#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300) - -/* ==================================================================== */ -/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */ -/* privilege vector for acc=0 */ -/* ==================================================================== */ -#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300) - -/* ==================================================================== */ -/* Some MMRs are functionally identical (or close enough) on both SHUB1 */ -/* and SHUB2 that it makes sense to define a geberic name for the MMR. */ -/* It is acceptable to use (for example) SH_IPI_INT to reference the */ -/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */ -/* on the type of the SHUB. Do not use these #defines in performance */ -/* critical code or loops - there is a small performance penalty. */ -/* ==================================================================== */ -#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b) - -#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0) -#define SH_IPI_INT shubmmr(SH, IPI_INT) -#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED) -#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS) -#define SH_RTC shubmmr(SH, RTC) -#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG) -#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE) -#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG) -#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE) -#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG) -#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE) -#define SH_INT_CMPB shubmmr(SH, INT_CMPB) -#define SH_INT_CMPC shubmmr(SH, INT_CMPC) -#define SH_INT_CMPD shubmmr(SH, INT_CMPD) - -/* ========================================================================== */ -/* Register "SH2_BT_ENG_CSR_0" */ -/* Engine 0 Control and Status Register */ -/* ========================================================================== */ - -#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000) -#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080) -#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100) -#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180) - -/* ========================================================================== */ -/* BTE interfaces 1-3 */ -/* ========================================================================== */ - -#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000) -#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000) -#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000) - -#endif /* _ASM_IA64_SN_SHUB_MMR_H */ diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h deleted file mode 100644 index 8a1ec139f977..000000000000 --- a/arch/ia64/include/asm/sn/shubio.h +++ /dev/null @@ -1,3358 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SHUBIO_H -#define _ASM_IA64_SN_SHUBIO_H - -#define HUB_WIDGET_ID_MAX 0xf -#define IIO_NUM_ITTES 7 -#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) - -#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */ - /* This register is also accessible from - * Crosstalk at address 0x0. */ -#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */ -#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */ -#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */ -#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */ -#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */ -#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */ -#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */ -#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */ -#define IIO_ILLR 0x00400130 /* IO LLP Log Register */ -#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */ - -#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */ -#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */ - -#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */ -#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */ - -#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */ -#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */ -#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */ -#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */ -#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */ -#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */ -#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */ - -#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */ -#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */ -#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */ -#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */ -#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */ -#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */ -#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */ -#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */ -#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */ - -#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */ -#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */ -#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */ -#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */ -#define IIO_IBCR 0x00400200 /* IO BTE Control Register */ - -#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */ -#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */ - -#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */ - -#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */ -#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */ - -#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */ -#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */ - -#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */ -#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */ -#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */ -#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */ -#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */ - -#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */ - -#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */ -#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */ -#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */ -#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */ -#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */ -#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */ -#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */ -#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */ - -#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */ -#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */ -#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */ -#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */ -#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */ -#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */ -#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */ -#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */ - -#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */ -#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */ -#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */ -#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */ -#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */ -#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */ -#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */ -#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */ - -#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */ -#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */ -#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */ -#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */ -#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */ - -#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */ -#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */ -#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */ -#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */ -#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */ - -#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */ -#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */ -#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */ -#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */ -#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */ - -#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */ -#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */ -#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */ -#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */ -#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */ - -#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */ -#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */ -#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */ -#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */ -#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */ - -#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */ -#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */ -#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */ -#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */ -#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */ - -#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */ -#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */ -#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */ -#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */ -#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */ - -#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */ -#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */ -#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */ -#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */ -#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */ - -#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */ -#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */ -#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */ -#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */ -#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */ - -#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */ -#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */ -#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */ -#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */ -#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */ - -#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */ -#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */ -#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */ -#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */ -#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */ - -#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */ -#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */ -#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */ -#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */ -#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */ - -#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */ -#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */ -#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */ -#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */ -#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */ - -#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */ -#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */ -#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */ -#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */ -#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */ - -#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */ -#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */ -#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */ -#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */ -#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */ - -#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */ -#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */ -#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */ - -#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */ - -#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */ -#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */ -#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */ -#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */ -#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */ -#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */ -#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */ -#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */ -#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */ -#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */ -#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */ -#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */ - -#define IIO_IPCR 0x00430000 /* IO Performance Control */ -#define IIO_IPPR 0x00430008 /* IO Performance Profiling */ - -/************************************************************************ - * * - * Description: This register echoes some information from the * - * LB_REV_ID register. It is available through Crosstalk as described * - * above. The REV_NUM and MFG_NUM fields receive their values from * - * the REVISION and MANUFACTURER fields in the LB_REV_ID register. * - * The PART_NUM field's value is the Crosstalk device ID number that * - * Steve Miller assigned to the SHub chip. * - * * - ************************************************************************/ - -typedef union ii_wid_u { - u64 ii_wid_regval; - struct { - u64 w_rsvd_1:1; - u64 w_mfg_num:11; - u64 w_part_num:16; - u64 w_rev_num:4; - u64 w_rsvd:32; - } ii_wid_fld_s; -} ii_wid_u_t; - -/************************************************************************ - * * - * The fields in this register are set upon detection of an error * - * and cleared by various mechanisms, as explained in the * - * description. * - * * - ************************************************************************/ - -typedef union ii_wstat_u { - u64 ii_wstat_regval; - struct { - u64 w_pending:4; - u64 w_xt_crd_to:1; - u64 w_xt_tail_to:1; - u64 w_rsvd_3:3; - u64 w_tx_mx_rty:1; - u64 w_rsvd_2:6; - u64 w_llp_tx_cnt:8; - u64 w_rsvd_1:8; - u64 w_crazy:1; - u64 w_rsvd:31; - } ii_wstat_fld_s; -} ii_wstat_u_t; - -/************************************************************************ - * * - * Description: This is a read-write enabled register. It controls * - * various aspects of the Crosstalk flow control. * - * * - ************************************************************************/ - -typedef union ii_wcr_u { - u64 ii_wcr_regval; - struct { - u64 w_wid:4; - u64 w_tag:1; - u64 w_rsvd_1:8; - u64 w_dst_crd:3; - u64 w_f_bad_pkt:1; - u64 w_dir_con:1; - u64 w_e_thresh:5; - u64 w_rsvd:41; - } ii_wcr_fld_s; -} ii_wcr_u_t; - -/************************************************************************ - * * - * Description: This register's value is a bit vector that guards * - * access to local registers within the II as well as to external * - * Crosstalk widgets. Each bit in the register corresponds to a * - * particular region in the system; a region consists of one, two or * - * four nodes (depending on the value of the REGION_SIZE field in the * - * LB_REV_ID register, which is documented in Section 8.3.1.1). The * - * protection provided by this register applies to PIO read * - * operations as well as PIO write operations. The II will perform a * - * PIO read or write request only if the bit for the requestor's * - * region is set; otherwise, the II will not perform the requested * - * operation and will return an error response. When a PIO read or * - * write request targets an external Crosstalk widget, then not only * - * must the bit for the requestor's region be set in the ILAPR, but * - * also the target widget's bit in the IOWA register must be set in * - * order for the II to perform the requested operation; otherwise, * - * the II will return an error response. Hence, the protection * - * provided by the IOWA register supplements the protection provided * - * by the ILAPR for requests that target external Crosstalk widgets. * - * This register itself can be accessed only by the nodes whose * - * region ID bits are enabled in this same register. It can also be * - * accessed through the IAlias space by the local processors. * - * The reset value of this register allows access by all nodes. * - * * - ************************************************************************/ - -typedef union ii_ilapr_u { - u64 ii_ilapr_regval; - struct { - u64 i_region:64; - } ii_ilapr_fld_s; -} ii_ilapr_u_t; - -/************************************************************************ - * * - * Description: A write to this register of the 64-bit value * - * "SGIrules" in ASCII, will cause the bit in the ILAPR register * - * corresponding to the region of the requestor to be set (allow * - * access). A write of any other value will be ignored. Access * - * protection for this register is "SGIrules". * - * This register can also be accessed through the IAlias space. * - * However, this access will not change the access permissions in the * - * ILAPR. * - * * - ************************************************************************/ - -typedef union ii_ilapo_u { - u64 ii_ilapo_regval; - struct { - u64 i_io_ovrride:64; - } ii_ilapo_fld_s; -} ii_ilapo_u_t; - -/************************************************************************ - * * - * This register qualifies all the PIO and Graphics writes launched * - * from the SHUB towards a widget. * - * * - ************************************************************************/ - -typedef union ii_iowa_u { - u64 ii_iowa_regval; - struct { - u64 i_w0_oac:1; - u64 i_rsvd_1:7; - u64 i_wx_oac:8; - u64 i_rsvd:48; - } ii_iowa_fld_s; -} ii_iowa_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the requests launched * - * from a widget towards the Shub. This register is intended to be * - * used by software in case of misbehaving widgets. * - * * - * * - ************************************************************************/ - -typedef union ii_iiwa_u { - u64 ii_iiwa_regval; - struct { - u64 i_w0_iac:1; - u64 i_rsvd_1:7; - u64 i_wx_iac:8; - u64 i_rsvd:48; - } ii_iiwa_fld_s; -} ii_iiwa_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the operations launched * - * from a widget towards the SHub. It allows individual access * - * control for up to 8 devices per widget. A device refers to * - * individual DMA master hosted by a widget. * - * The bits in each field of this register are cleared by the Shub * - * upon detection of an error which requires the device to be * - * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric * - * Crosstalk). Whether or not a device has access rights to this * - * Shub is determined by an AND of the device enable bit in the * - * appropriate field of this register and the corresponding bit in * - * the Wx_IAC field (for the widget which this device belongs to). * - * The bits in this field are set by writing a 1 to them. Incoming * - * replies from Crosstalk are not subject to this access control * - * mechanism. * - * * - ************************************************************************/ - -typedef union ii_iidem_u { - u64 ii_iidem_regval; - struct { - u64 i_w8_dxs:8; - u64 i_w9_dxs:8; - u64 i_wa_dxs:8; - u64 i_wb_dxs:8; - u64 i_wc_dxs:8; - u64 i_wd_dxs:8; - u64 i_we_dxs:8; - u64 i_wf_dxs:8; - } ii_iidem_fld_s; -} ii_iidem_u_t; - -/************************************************************************ - * * - * This register contains the various programmable fields necessary * - * for controlling and observing the LLP signals. * - * * - ************************************************************************/ - -typedef union ii_ilcsr_u { - u64 ii_ilcsr_regval; - struct { - u64 i_nullto:6; - u64 i_rsvd_4:2; - u64 i_wrmrst:1; - u64 i_rsvd_3:1; - u64 i_llp_en:1; - u64 i_bm8:1; - u64 i_llp_stat:2; - u64 i_remote_power:1; - u64 i_rsvd_2:1; - u64 i_maxrtry:10; - u64 i_d_avail_sel:2; - u64 i_rsvd_1:4; - u64 i_maxbrst:10; - u64 i_rsvd:22; - - } ii_ilcsr_fld_s; -} ii_ilcsr_u_t; - -/************************************************************************ - * * - * This is simply a status registers that monitors the LLP error * - * rate. * - * * - ************************************************************************/ - -typedef union ii_illr_u { - u64 ii_illr_regval; - struct { - u64 i_sn_cnt:16; - u64 i_cb_cnt:16; - u64 i_rsvd:32; - } ii_illr_fld_s; -} ii_illr_u_t; - -/************************************************************************ - * * - * Description: All II-detected non-BTE error interrupts are * - * specified via this register. * - * NOTE: The PI interrupt register address is hardcoded in the II. If * - * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI * - * packet) to address offset 0x0180_0090 within the local register * - * address space of PI0 on the node specified by the NODE field. If * - * PI_ID==1, then the II sends the interrupt request to address * - * offset 0x01A0_0090 within the local register address space of PI1 * - * on the node specified by the NODE field. * - * * - ************************************************************************/ - -typedef union ii_iidsr_u { - u64 ii_iidsr_regval; - struct { - u64 i_level:8; - u64 i_pi_id:1; - u64 i_node:11; - u64 i_rsvd_3:4; - u64 i_enable:1; - u64 i_rsvd_2:3; - u64 i_int_sent:2; - u64 i_rsvd_1:2; - u64 i_pi0_forward_int:1; - u64 i_pi1_forward_int:1; - u64 i_rsvd:30; - } ii_iidsr_fld_s; -} ii_iidsr_u_t; - -/************************************************************************ - * * - * There are two instances of this register. This register is used * - * for matching up the incoming responses from the graphics widget to * - * the processor that initiated the graphics operation. The * - * write-responses are converted to graphics credits and returned to * - * the processor so that the processor interface can manage the flow * - * control. * - * * - ************************************************************************/ - -typedef union ii_igfx0_u { - u64 ii_igfx0_regval; - struct { - u64 i_w_num:4; - u64 i_pi_id:1; - u64 i_n_num:12; - u64 i_p_num:1; - u64 i_rsvd:46; - } ii_igfx0_fld_s; -} ii_igfx0_u_t; - -/************************************************************************ - * * - * There are two instances of this register. This register is used * - * for matching up the incoming responses from the graphics widget to * - * the processor that initiated the graphics operation. The * - * write-responses are converted to graphics credits and returned to * - * the processor so that the processor interface can manage the flow * - * control. * - * * - ************************************************************************/ - -typedef union ii_igfx1_u { - u64 ii_igfx1_regval; - struct { - u64 i_w_num:4; - u64 i_pi_id:1; - u64 i_n_num:12; - u64 i_p_num:1; - u64 i_rsvd:46; - } ii_igfx1_fld_s; -} ii_igfx1_u_t; - -/************************************************************************ - * * - * There are two instances of this registers. These registers are * - * used as scratch registers for software use. * - * * - ************************************************************************/ - -typedef union ii_iscr0_u { - u64 ii_iscr0_regval; - struct { - u64 i_scratch:64; - } ii_iscr0_fld_s; -} ii_iscr0_u_t; - -/************************************************************************ - * * - * There are two instances of this registers. These registers are * - * used as scratch registers for software use. * - * * - ************************************************************************/ - -typedef union ii_iscr1_u { - u64 ii_iscr1_regval; - struct { - u64 i_scratch:64; - } ii_iscr1_fld_s; -} ii_iscr1_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the SHub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte1_u { - u64 ii_itte1_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte1_fld_s; -} ii_itte1_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte2_u { - u64 ii_itte2_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte2_fld_s; -} ii_itte2_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte3_u { - u64 ii_itte3_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte3_fld_s; -} ii_itte3_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a SHub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the SHub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte4_u { - u64 ii_itte4_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte4_fld_s; -} ii_itte4_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a SHub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte5_u { - u64 ii_itte5_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte5_fld_s; -} ii_itte5_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the Shub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte6_u { - u64 ii_itte6_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte6_fld_s; -} ii_itte6_u_t; - -/************************************************************************ - * * - * Description: There are seven instances of translation table entry * - * registers. Each register maps a Shub Big Window to a 48-bit * - * address on Crosstalk. * - * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window * - * number) are used to select one of these 7 registers. The Widget * - * number field is then derived from the W_NUM field for synthesizing * - * a Crosstalk packet. The 5 bits of OFFSET are concatenated with * - * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] * - * are padded with zeros. Although the maximum Crosstalk space * - * addressable by the Shub is thus the lower 16 GBytes per widget * - * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this * - * space can be accessed. * - * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big * - * Window number) are used to select one of these 7 registers. The * - * Widget number field is then derived from the W_NUM field for * - * synthesizing a Crosstalk packet. The 5 bits of OFFSET are * - * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP * - * field is used as Crosstalk[47], and remainder of the Crosstalk * - * address bits (Crosstalk[46:34]) are always zero. While the maximum * - * Crosstalk space addressable by the SHub is thus the lower * - * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> * - * of this space can be accessed. * - * * - ************************************************************************/ - -typedef union ii_itte7_u { - u64 ii_itte7_regval; - struct { - u64 i_offset:5; - u64 i_rsvd_1:3; - u64 i_w_num:4; - u64 i_iosp:1; - u64 i_rsvd:51; - } ii_itte7_fld_s; -} ii_itte7_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb0_u { - u64 ii_iprb0_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb0_fld_s; -} ii_iprb0_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb8_u { - u64 ii_iprb8_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb8_fld_s; -} ii_iprb8_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprb9_u { - u64 ii_iprb9_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprb9_fld_s; -} ii_iprb9_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * * - * * - ************************************************************************/ - -typedef union ii_iprba_u { - u64 ii_iprba_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprba_fld_s; -} ii_iprba_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbb_u { - u64 ii_iprbb_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbb_fld_s; -} ii_iprbb_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbc_u { - u64 ii_iprbc_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbc_fld_s; -} ii_iprbc_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbd_u { - u64 ii_iprbd_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbd_fld_s; -} ii_iprbd_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of SHub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbe_u { - u64 ii_iprbe_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbe_fld_s; -} ii_iprbe_u_t; - -/************************************************************************ - * * - * Description: There are 9 instances of this register, one per * - * actual widget in this implementation of Shub and Crossbow. * - * Note: Crossbow only has ports for Widgets 8 through F, widget 0 * - * refers to Crossbow's internal space. * - * This register contains the state elements per widget that are * - * necessary to manage the PIO flow control on Crosstalk and on the * - * Router Network. See the PIO Flow Control chapter for a complete * - * description of this register * - * The SPUR_WR bit requires some explanation. When this register is * - * written, the new value of the C field is captured in an internal * - * register so the hardware can remember what the programmer wrote * - * into the credit counter. The SPUR_WR bit sets whenever the C field * - * increments above this stored value, which indicates that there * - * have been more responses received than requests sent. The SPUR_WR * - * bit cannot be cleared until a value is written to the IPRBx * - * register; the write will correct the C field and capture its new * - * value in the internal register. Even if IECLR[E_PRB_x] is set, the * - * SPUR_WR bit will persist if IPRBx hasn't yet been written. * - * . * - * * - ************************************************************************/ - -typedef union ii_iprbf_u { - u64 ii_iprbf_regval; - struct { - u64 i_c:8; - u64 i_na:14; - u64 i_rsvd_2:2; - u64 i_nb:14; - u64 i_rsvd_1:2; - u64 i_m:2; - u64 i_f:1; - u64 i_of_cnt:5; - u64 i_error:1; - u64 i_rd_to:1; - u64 i_spur_wr:1; - u64 i_spur_rd:1; - u64 i_rsvd:11; - u64 i_mult_err:1; - } ii_iprbe_fld_s; -} ii_iprbf_u_t; - -/************************************************************************ - * * - * This register specifies the timeout value to use for monitoring * - * Crosstalk credits which are used outbound to Crosstalk. An * - * internal counter called the Crosstalk Credit Timeout Counter * - * increments every 128 II clocks. The counter starts counting * - * anytime the credit count drops below a threshold, and resets to * - * zero (stops counting) anytime the credit count is at or above the * - * threshold. The threshold is 1 credit in direct connect mode and 2 * - * in Crossbow connect mode. When the internal Crosstalk Credit * - * Timeout Counter reaches the value programmed in this register, a * - * Crosstalk Credit Timeout has occurred. The internal counter is not * - * readable from software, and stops counting at its maximum value, * - * so it cannot cause more than one interrupt. * - * * - ************************************************************************/ - -typedef union ii_ixcc_u { - u64 ii_ixcc_regval; - struct { - u64 i_time_out:26; - u64 i_rsvd:38; - } ii_ixcc_fld_s; -} ii_ixcc_u_t; - -/************************************************************************ - * * - * Description: This register qualifies all the PIO and DMA * - * operations launched from widget 0 towards the SHub. In * - * addition, it also qualifies accesses by the BTE streams. * - * The bits in each field of this register are cleared by the SHub * - * upon detection of an error which requires widget 0 or the BTE * - * streams to be terminated. Whether or not widget x has access * - * rights to this SHub is determined by an AND of the device * - * enable bit in the appropriate field of this register and bit 0 in * - * the Wx_IAC field. The bits in this field are set by writing a 1 to * - * them. Incoming replies from Crosstalk are not subject to this * - * access control mechanism. * - * * - ************************************************************************/ - -typedef union ii_imem_u { - u64 ii_imem_regval; - struct { - u64 i_w0_esd:1; - u64 i_rsvd_3:3; - u64 i_b0_esd:1; - u64 i_rsvd_2:3; - u64 i_b1_esd:1; - u64 i_rsvd_1:3; - u64 i_clr_precise:1; - u64 i_rsvd:51; - } ii_imem_fld_s; -} ii_imem_u_t; - -/************************************************************************ - * * - * Description: This register specifies the timeout value to use for * - * monitoring Crosstalk tail flits coming into the Shub in the * - * TAIL_TO field. An internal counter associated with this register * - * is incremented every 128 II internal clocks (7 bits). The counter * - * starts counting anytime a header micropacket is received and stops * - * counting (and resets to zero) any time a micropacket with a Tail * - * bit is received. Once the counter reaches the threshold value * - * programmed in this register, it generates an interrupt to the * - * processor that is programmed into the IIDSR. The counter saturates * - * (does not roll over) at its maximum value, so it cannot cause * - * another interrupt until after it is cleared. * - * The register also contains the Read Response Timeout values. The * - * Prescalar is 23 bits, and counts II clocks. An internal counter * - * increments on every II clock and when it reaches the value in the * - * Prescalar field, all IPRTE registers with their valid bits set * - * have their Read Response timers bumped. Whenever any of them match * - * the value in the RRSP_TO field, a Read Response Timeout has * - * occurred, and error handling occurs as described in the Error * - * Handling section of this document. * - * * - ************************************************************************/ - -typedef union ii_ixtt_u { - u64 ii_ixtt_regval; - struct { - u64 i_tail_to:26; - u64 i_rsvd_1:6; - u64 i_rrsp_ps:23; - u64 i_rrsp_to:5; - u64 i_rsvd:4; - } ii_ixtt_fld_s; -} ii_ixtt_u_t; - -/************************************************************************ - * * - * Writing a 1 to the fields of this register clears the appropriate * - * error bits in other areas of SHub. Note that when the * - * E_PRB_x bits are used to clear error bits in PRB registers, * - * SPUR_RD and SPUR_WR may persist, because they require additional * - * action to clear them. See the IPRBx and IXSS Register * - * specifications. * - * * - ************************************************************************/ - -typedef union ii_ieclr_u { - u64 ii_ieclr_regval; - struct { - u64 i_e_prb_0:1; - u64 i_rsvd:7; - u64 i_e_prb_8:1; - u64 i_e_prb_9:1; - u64 i_e_prb_a:1; - u64 i_e_prb_b:1; - u64 i_e_prb_c:1; - u64 i_e_prb_d:1; - u64 i_e_prb_e:1; - u64 i_e_prb_f:1; - u64 i_e_crazy:1; - u64 i_e_bte_0:1; - u64 i_e_bte_1:1; - u64 i_reserved_1:10; - u64 i_spur_rd_hdr:1; - u64 i_cam_intr_to:1; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_ii_xn_rep_cred_overflow:1; - u64 i_ii_xn_req_cred_overflow:1; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_reserved_2:21; - } ii_ieclr_fld_s; -} ii_ieclr_u_t; - -/************************************************************************ - * * - * This register controls both BTEs. SOFT_RESET is intended for * - * recovery after an error. COUNT controls the total number of CRBs * - * that both BTEs (combined) can use, which affects total BTE * - * bandwidth. * - * * - ************************************************************************/ - -typedef union ii_ibcr_u { - u64 ii_ibcr_regval; - struct { - u64 i_count:4; - u64 i_rsvd_1:4; - u64 i_soft_reset:1; - u64 i_rsvd:55; - } ii_ibcr_fld_s; -} ii_ibcr_u_t; - -/************************************************************************ - * * - * This register contains the header of a spurious read response * - * received from Crosstalk. A spurious read response is defined as a * - * read response received by II from a widget for which (1) the SIDN * - * has a value between 1 and 7, inclusive (II never sends requests to * - * these widgets (2) there is no valid IPRTE register which * - * corresponds to the TNUM, or (3) the widget indicated in SIDN is * - * not the same as the widget recorded in the IPRTE register * - * referenced by the TNUM. If this condition is true, and if the * - * IXSS[VALID] bit is clear, then the header of the spurious read * - * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The * - * errant header is thereby captured, and no further spurious read * - * respones are captured until IXSS[VALID] is cleared by setting the * - * appropriate bit in IECLR. Every time a spurious read response is * - * detected, the SPUR_RD bit of the PRB corresponding to the incoming * - * message's SIDN field is set. This always happens, regardless of * - * whether a header is captured. The programmer should check * - * IXSM[SIDN] to determine which widget sent the spurious response, * - * because there may be more than one SPUR_RD bit set in the PRB * - * registers. The widget indicated by IXSM[SIDN] was the first * - * spurious read response to be received since the last time * - * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB * - * will be set. Any SPUR_RD bits in any other PRB registers indicate * - * spurious messages from other widets which were detected after the * - * header was captured.. * - * * - ************************************************************************/ - -typedef union ii_ixsm_u { - u64 ii_ixsm_regval; - struct { - u64 i_byte_en:32; - u64 i_reserved:1; - u64 i_tag:3; - u64 i_alt_pactyp:4; - u64 i_bo:1; - u64 i_error:1; - u64 i_vbpm:1; - u64 i_gbr:1; - u64 i_ds:2; - u64 i_ct:1; - u64 i_tnum:5; - u64 i_pactyp:4; - u64 i_sidn:4; - u64 i_didn:4; - } ii_ixsm_fld_s; -} ii_ixsm_u_t; - -/************************************************************************ - * * - * This register contains the sideband bits of a spurious read * - * response received from Crosstalk. * - * * - ************************************************************************/ - -typedef union ii_ixss_u { - u64 ii_ixss_regval; - struct { - u64 i_sideband:8; - u64 i_rsvd:55; - u64 i_valid:1; - } ii_ixss_fld_s; -} ii_ixss_u_t; - -/************************************************************************ - * * - * This register enables software to access the II LLP's test port. * - * Refer to the LLP 2.5 documentation for an explanation of the test * - * port. Software can write to this register to program the values * - * for the control fields (TestErrCapture, TestClear, TestFlit, * - * TestMask and TestSeed). Similarly, software can read from this * - * register to obtain the values of the test port's status outputs * - * (TestCBerr, TestValid and TestData). * - * * - ************************************************************************/ - -typedef union ii_ilct_u { - u64 ii_ilct_regval; - struct { - u64 i_test_seed:20; - u64 i_test_mask:8; - u64 i_test_data:20; - u64 i_test_valid:1; - u64 i_test_cberr:1; - u64 i_test_flit:3; - u64 i_test_clear:1; - u64 i_test_err_capture:1; - u64 i_rsvd:9; - } ii_ilct_fld_s; -} ii_ilct_u_t; - -/************************************************************************ - * * - * If the II detects an illegal incoming Duplonet packet (request or * - * reply) when VALID==0 in the IIEPH1 register, then it saves the * - * contents of the packet's header flit in the IIEPH1 and IIEPH2 * - * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, * - * and assigns a value to the ERR_TYPE field which indicates the * - * specific nature of the error. The II recognizes four different * - * types of errors: short request packets (ERR_TYPE==2), short reply * - * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long * - * reply packets (ERR_TYPE==5). The encodings for these types of * - * errors were chosen to be consistent with the same types of errors * - * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in * - * the LB unit). If the II detects an illegal incoming Duplonet * - * packet when VALID==1 in the IIEPH1 register, then it merely sets * - * the OVERRUN bit to indicate that a subsequent error has happened, * - * and does nothing further. * - * * - ************************************************************************/ - -typedef union ii_iieph1_u { - u64 ii_iieph1_regval; - struct { - u64 i_command:7; - u64 i_rsvd_5:1; - u64 i_suppl:14; - u64 i_rsvd_4:1; - u64 i_source:14; - u64 i_rsvd_3:1; - u64 i_err_type:4; - u64 i_rsvd_2:4; - u64 i_overrun:1; - u64 i_rsvd_1:3; - u64 i_valid:1; - u64 i_rsvd:13; - } ii_iieph1_fld_s; -} ii_iieph1_u_t; - -/************************************************************************ - * * - * This register holds the Address field from the header flit of an * - * incoming erroneous Duplonet packet, along with the tail bit which * - * accompanied this header flit. This register is essentially an * - * extension of IIEPH1. Two registers were necessary because the 64 * - * bits available in only a single register were insufficient to * - * capture the entire header flit of an erroneous packet. * - * * - ************************************************************************/ - -typedef union ii_iieph2_u { - u64 ii_iieph2_regval; - struct { - u64 i_rsvd_0:3; - u64 i_address:47; - u64 i_rsvd_1:10; - u64 i_tail:1; - u64 i_rsvd:3; - } ii_iieph2_fld_s; -} ii_iieph2_u_t; - -/******************************/ - -/************************************************************************ - * * - * This register's value is a bit vector that guards access from SXBs * - * to local registers within the II as well as to external Crosstalk * - * widgets * - * * - ************************************************************************/ - -typedef union ii_islapr_u { - u64 ii_islapr_regval; - struct { - u64 i_region:64; - } ii_islapr_fld_s; -} ii_islapr_u_t; - -/************************************************************************ - * * - * A write to this register of the 56-bit value "Pup+Bun" will cause * - * the bit in the ISLAPR register corresponding to the region of the * - * requestor to be set (access allowed). ( - * * - ************************************************************************/ - -typedef union ii_islapo_u { - u64 ii_islapo_regval; - struct { - u64 i_io_sbx_ovrride:56; - u64 i_rsvd:8; - } ii_islapo_fld_s; -} ii_islapo_u_t; - -/************************************************************************ - * * - * Determines how long the wrapper will wait aftr an interrupt is * - * initially issued from the II before it times out the outstanding * - * interrupt and drops it from the interrupt queue. * - * * - ************************************************************************/ - -typedef union ii_iwi_u { - u64 ii_iwi_regval; - struct { - u64 i_prescale:24; - u64 i_rsvd:8; - u64 i_timeout:8; - u64 i_rsvd1:8; - u64 i_intrpt_retry_period:8; - u64 i_rsvd2:8; - } ii_iwi_fld_s; -} ii_iwi_u_t; - -/************************************************************************ - * * - * Log errors which have occurred in the II wrapper. The errors are * - * cleared by writing to the IECLR register. * - * * - ************************************************************************/ - -typedef union ii_iwel_u { - u64 ii_iwel_regval; - struct { - u64 i_intr_timed_out:1; - u64 i_rsvd:7; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_rsvd1:2; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_rsvd2:6; - u64 i_ii_xn_rep_cred_over_under:1; - u64 i_ii_xn_req_cred_over_under:1; - u64 i_rsvd3:6; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_rsvd4:30; - } ii_iwel_fld_s; -} ii_iwel_u_t; - -/************************************************************************ - * * - * Controls the II wrapper. * - * * - ************************************************************************/ - -typedef union ii_iwc_u { - u64 ii_iwc_regval; - struct { - u64 i_dma_byte_swap:1; - u64 i_rsvd:3; - u64 i_cam_read_lines_reset:1; - u64 i_rsvd1:3; - u64 i_ii_xn_cred_over_under_log:1; - u64 i_rsvd2:19; - u64 i_xn_rep_iq_depth:5; - u64 i_rsvd3:3; - u64 i_xn_req_iq_depth:5; - u64 i_rsvd4:3; - u64 i_iiq_depth:6; - u64 i_rsvd5:12; - u64 i_force_rep_cred:1; - u64 i_force_req_cred:1; - } ii_iwc_fld_s; -} ii_iwc_u_t; - -/************************************************************************ - * * - * Status in the II wrapper. * - * * - ************************************************************************/ - -typedef union ii_iws_u { - u64 ii_iws_regval; - struct { - u64 i_xn_rep_iq_credits:5; - u64 i_rsvd:3; - u64 i_xn_req_iq_credits:5; - u64 i_rsvd1:51; - } ii_iws_fld_s; -} ii_iws_u_t; - -/************************************************************************ - * * - * Masks errors in the IWEL register. * - * * - ************************************************************************/ - -typedef union ii_iweim_u { - u64 ii_iweim_regval; - struct { - u64 i_intr_timed_out:1; - u64 i_rsvd:7; - u64 i_cam_overflow:1; - u64 i_cam_read_miss:1; - u64 i_rsvd1:2; - u64 i_ioq_rep_underflow:1; - u64 i_ioq_req_underflow:1; - u64 i_ioq_rep_overflow:1; - u64 i_ioq_req_overflow:1; - u64 i_iiq_rep_overflow:1; - u64 i_iiq_req_overflow:1; - u64 i_rsvd2:6; - u64 i_ii_xn_rep_cred_overflow:1; - u64 i_ii_xn_req_cred_overflow:1; - u64 i_rsvd3:6; - u64 i_ii_xn_invalid_cmd:1; - u64 i_xn_ii_invalid_cmd:1; - u64 i_rsvd4:30; - } ii_iweim_fld_s; -} ii_iweim_u_t; - -/************************************************************************ - * * - * A write to this register causes a particular field in the * - * corresponding widget's PRB entry to be adjusted up or down by 1. * - * This counter should be used when recovering from error and reset * - * conditions. Note that software would be capable of causing * - * inadvertent overflow or underflow of these counters. * - * * - ************************************************************************/ - -typedef union ii_ipca_u { - u64 ii_ipca_regval; - struct { - u64 i_wid:4; - u64 i_adjust:1; - u64 i_rsvd_1:3; - u64 i_field:2; - u64 i_rsvd:54; - } ii_ipca_fld_s; -} ii_ipca_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte0a_u { - u64 ii_iprte0a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte0a_fld_s; -} ii_iprte0a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte1a_u { - u64 ii_iprte1a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte1a_fld_s; -} ii_iprte1a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte2a_u { - u64 ii_iprte2a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte2a_fld_s; -} ii_iprte2a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte3a_u { - u64 ii_iprte3a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte3a_fld_s; -} ii_iprte3a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte4a_u { - u64 ii_iprte4a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte4a_fld_s; -} ii_iprte4a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte5a_u { - u64 ii_iprte5a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte5a_fld_s; -} ii_iprte5a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte6a_u { - u64 ii_iprte6a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprte6a_fld_s; -} ii_iprte6a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte7a_u { - u64 ii_iprte7a_regval; - struct { - u64 i_rsvd_1:54; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } ii_iprtea7_fld_s; -} ii_iprte7a_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte0b_u { - u64 ii_iprte0b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte0b_fld_s; -} ii_iprte0b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte1b_u { - u64 ii_iprte1b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte1b_fld_s; -} ii_iprte1b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte2b_u { - u64 ii_iprte2b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte2b_fld_s; -} ii_iprte2b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte3b_u { - u64 ii_iprte3b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte3b_fld_s; -} ii_iprte3b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte4b_u { - u64 ii_iprte4b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte4b_fld_s; -} ii_iprte4b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte5b_u { - u64 ii_iprte5b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte5b_fld_s; -} ii_iprte5b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte6b_u { - u64 ii_iprte6b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - - } ii_iprte6b_fld_s; -} ii_iprte6b_u_t; - -/************************************************************************ - * * - * There are 8 instances of this register. This register contains * - * the information that the II has to remember once it has launched a * - * PIO Read operation. The contents are used to form the correct * - * Router Network packet and direct the Crosstalk reply to the * - * appropriate processor. * - * * - ************************************************************************/ - -typedef union ii_iprte7b_u { - u64 ii_iprte7b_regval; - struct { - u64 i_rsvd_1:3; - u64 i_address:47; - u64 i_init:3; - u64 i_source:11; - } ii_iprte7b_fld_s; -} ii_iprte7b_u_t; - -/************************************************************************ - * * - * Description: SHub II contains a feature which did not exist in * - * the Hub which automatically cleans up after a Read Response * - * timeout, including deallocation of the IPRTE and recovery of IBuf * - * space. The inclusion of this register in SHub is for backward * - * compatibility * - * A write to this register causes an entry from the table of * - * outstanding PIO Read Requests to be freed and returned to the * - * stack of free entries. This register is used in handling the * - * timeout errors that result in a PIO Reply never returning from * - * Crosstalk. * - * Note that this register does not affect the contents of the IPRTE * - * registers. The Valid bits in those registers have to be * - * specifically turned off by software. * - * * - ************************************************************************/ - -typedef union ii_ipdr_u { - u64 ii_ipdr_regval; - struct { - u64 i_te:3; - u64 i_rsvd_1:1; - u64 i_pnd:1; - u64 i_init_rpcnt:1; - u64 i_rsvd:58; - } ii_ipdr_fld_s; -} ii_ipdr_u_t; - -/************************************************************************ - * * - * A write to this register causes a CRB entry to be returned to the * - * queue of free CRBs. The entry should have previously been cleared * - * (mark bit) via backdoor access to the pertinent CRB entry. This * - * register is used in the last step of handling the errors that are * - * captured and marked in CRB entries. Briefly: 1) first error for * - * DMA write from a particular device, and first error for a * - * particular BTE stream, lead to a marked CRB entry, and processor * - * interrupt, 2) software reads the error information captured in the * - * CRB entry, and presumably takes some corrective action, 3) * - * software clears the mark bit, and finally 4) software writes to * - * the ICDR register to return the CRB entry to the list of free CRB * - * entries. * - * * - ************************************************************************/ - -typedef union ii_icdr_u { - u64 ii_icdr_regval; - struct { - u64 i_crb_num:4; - u64 i_pnd:1; - u64 i_rsvd:59; - } ii_icdr_fld_s; -} ii_icdr_u_t; - -/************************************************************************ - * * - * This register provides debug access to two FIFOs inside of II. * - * Both IOQ_MAX* fields of this register contain the instantaneous * - * depth (in units of the number of available entries) of the * - * associated IOQ FIFO. A read of this register will return the * - * number of free entries on each FIFO at the time of the read. So * - * when a FIFO is idle, the associated field contains the maximum * - * depth of the FIFO. This register is writable for debug reasons * - * and is intended to be written with the maximum desired FIFO depth * - * while the FIFO is idle. Software must assure that II is idle when * - * this register is written. If there are any active entries in any * - * of these FIFOs when this register is written, the results are * - * undefined. * - * * - ************************************************************************/ - -typedef union ii_ifdr_u { - u64 ii_ifdr_regval; - struct { - u64 i_ioq_max_rq:7; - u64 i_set_ioq_rq:1; - u64 i_ioq_max_rp:7; - u64 i_set_ioq_rp:1; - u64 i_rsvd:48; - } ii_ifdr_fld_s; -} ii_ifdr_u_t; - -/************************************************************************ - * * - * This register allows the II to become sluggish in removing * - * messages from its inbound queue (IIQ). This will cause messages to * - * back up in either virtual channel. Disabling the "molasses" mode * - * subsequently allows the II to be tested under stress. In the * - * sluggish ("Molasses") mode, the localized effects of congestion * - * can be observed. * - * * - ************************************************************************/ - -typedef union ii_iiap_u { - u64 ii_iiap_regval; - struct { - u64 i_rq_mls:6; - u64 i_rsvd_1:2; - u64 i_rp_mls:6; - u64 i_rsvd:50; - } ii_iiap_fld_s; -} ii_iiap_u_t; - -/************************************************************************ - * * - * This register allows several parameters of CRB operation to be * - * set. Note that writing to this register can have catastrophic side * - * effects, if the CRB is not quiescent, i.e. if the CRB is * - * processing protocol messages when the write occurs. * - * * - ************************************************************************/ - -typedef union ii_icmr_u { - u64 ii_icmr_regval; - struct { - u64 i_sp_msg:1; - u64 i_rd_hdr:1; - u64 i_rsvd_4:2; - u64 i_c_cnt:4; - u64 i_rsvd_3:4; - u64 i_clr_rqpd:1; - u64 i_clr_rppd:1; - u64 i_rsvd_2:2; - u64 i_fc_cnt:4; - u64 i_crb_vld:15; - u64 i_crb_mark:15; - u64 i_rsvd_1:2; - u64 i_precise:1; - u64 i_rsvd:11; - } ii_icmr_fld_s; -} ii_icmr_u_t; - -/************************************************************************ - * * - * This register allows control of the table portion of the CRB * - * logic via software. Control operations from this register have * - * priority over all incoming Crosstalk or BTE requests. * - * * - ************************************************************************/ - -typedef union ii_iccr_u { - u64 ii_iccr_regval; - struct { - u64 i_crb_num:4; - u64 i_rsvd_1:4; - u64 i_cmd:8; - u64 i_pending:1; - u64 i_rsvd:47; - } ii_iccr_fld_s; -} ii_iccr_u_t; - -/************************************************************************ - * * - * This register allows the maximum timeout value to be programmed. * - * * - ************************************************************************/ - -typedef union ii_icto_u { - u64 ii_icto_regval; - struct { - u64 i_timeout:8; - u64 i_rsvd:56; - } ii_icto_fld_s; -} ii_icto_u_t; - -/************************************************************************ - * * - * This register allows the timeout prescalar to be programmed. An * - * internal counter is associated with this register. When the * - * internal counter reaches the value of the PRESCALE field, the * - * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] * - * field). The internal counter resets to zero, and then continues * - * counting. * - * * - ************************************************************************/ - -typedef union ii_ictp_u { - u64 ii_ictp_regval; - struct { - u64 i_prescale:24; - u64 i_rsvd:40; - } ii_ictp_fld_s; -} ii_ictp_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * The CRB Entry registers can be conceptualized as rows and columns * - * (illustrated in the table above). Each row contains the 4 * - * registers required for a single CRB Entry. The first doubleword * - * (column) for each entry is labeled A, and the second doubleword * - * (higher address) is labeled B, the third doubleword is labeled C, * - * the fourth doubleword is labeled D and the fifth doubleword is * - * labeled E. All CRB entries have their addresses on a quarter * - * cacheline aligned boundary. * - * Upon reset, only the following fields are initialized: valid * - * (VLD), priority count, timeout, timeout valid, and context valid. * - * All other bits should be cleared by software before use (after * - * recovering any potential error state from before the reset). * - * The following four tables summarize the format for the four * - * registers that are used for each ICRB# Entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_a_u { - u64 ii_icrb0_a_regval; - struct { - u64 ia_iow:1; - u64 ia_vld:1; - u64 ia_addr:47; - u64 ia_tnum:5; - u64 ia_sidn:4; - u64 ia_rsvd:6; - } ii_icrb0_a_fld_s; -} ii_icrb0_a_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_b_u { - u64 ii_icrb0_b_regval; - struct { - u64 ib_xt_err:1; - u64 ib_mark:1; - u64 ib_ln_uce:1; - u64 ib_errcode:3; - u64 ib_error:1; - u64 ib_stall__bte_1:1; - u64 ib_stall__bte_0:1; - u64 ib_stall__intr:1; - u64 ib_stall_ib:1; - u64 ib_intvn:1; - u64 ib_wb:1; - u64 ib_hold:1; - u64 ib_ack:1; - u64 ib_resp:1; - u64 ib_ack_cnt:11; - u64 ib_rsvd:7; - u64 ib_exc:5; - u64 ib_init:3; - u64 ib_imsg:8; - u64 ib_imsgtype:2; - u64 ib_use_old:1; - u64 ib_rsvd_1:11; - } ii_icrb0_b_fld_s; -} ii_icrb0_b_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_c_u { - u64 ii_icrb0_c_regval; - struct { - u64 ic_source:15; - u64 ic_size:2; - u64 ic_ct:1; - u64 ic_bte_num:1; - u64 ic_gbr:1; - u64 ic_resprqd:1; - u64 ic_bo:1; - u64 ic_suppl:15; - u64 ic_rsvd:27; - } ii_icrb0_c_fld_s; -} ii_icrb0_c_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_d_u { - u64 ii_icrb0_d_regval; - struct { - u64 id_pa_be:43; - u64 id_bte_op:1; - u64 id_pr_psc:4; - u64 id_pr_cnt:4; - u64 id_sleep:1; - u64 id_rsvd:11; - } ii_icrb0_d_fld_s; -} ii_icrb0_d_u_t; - -/************************************************************************ - * * - * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are * - * used for Crosstalk operations (both cacheline and partial * - * operations) or BTE/IO. Because the CRB entries are very wide, five * - * registers (_A to _E) are required to read and write each entry. * - * * - ************************************************************************/ - -typedef union ii_icrb0_e_u { - u64 ii_icrb0_e_regval; - struct { - u64 ie_timeout:8; - u64 ie_context:15; - u64 ie_rsvd:1; - u64 ie_tvld:1; - u64 ie_cvld:1; - u64 ie_rsvd_0:38; - } ii_icrb0_e_fld_s; -} ii_icrb0_e_u_t; - -/************************************************************************ - * * - * This register contains the lower 64 bits of the header of the * - * spurious message captured by II. Valid when the SP_MSG bit in ICMR * - * register is set. * - * * - ************************************************************************/ - -typedef union ii_icsml_u { - u64 ii_icsml_regval; - struct { - u64 i_tt_addr:47; - u64 i_newsuppl_ex:14; - u64 i_reserved:2; - u64 i_overflow:1; - } ii_icsml_fld_s; -} ii_icsml_u_t; - -/************************************************************************ - * * - * This register contains the middle 64 bits of the header of the * - * spurious message captured by II. Valid when the SP_MSG bit in ICMR * - * register is set. * - * * - ************************************************************************/ - -typedef union ii_icsmm_u { - u64 ii_icsmm_regval; - struct { - u64 i_tt_ack_cnt:11; - u64 i_reserved:53; - } ii_icsmm_fld_s; -} ii_icsmm_u_t; - -/************************************************************************ - * * - * This register contains the microscopic state, all the inputs to * - * the protocol table, captured with the spurious message. Valid when * - * the SP_MSG bit in the ICMR register is set. * - * * - ************************************************************************/ - -typedef union ii_icsmh_u { - u64 ii_icsmh_regval; - struct { - u64 i_tt_vld:1; - u64 i_xerr:1; - u64 i_ft_cwact_o:1; - u64 i_ft_wact_o:1; - u64 i_ft_active_o:1; - u64 i_sync:1; - u64 i_mnusg:1; - u64 i_mnusz:1; - u64 i_plusz:1; - u64 i_plusg:1; - u64 i_tt_exc:5; - u64 i_tt_wb:1; - u64 i_tt_hold:1; - u64 i_tt_ack:1; - u64 i_tt_resp:1; - u64 i_tt_intvn:1; - u64 i_g_stall_bte1:1; - u64 i_g_stall_bte0:1; - u64 i_g_stall_il:1; - u64 i_g_stall_ib:1; - u64 i_tt_imsg:8; - u64 i_tt_imsgtype:2; - u64 i_tt_use_old:1; - u64 i_tt_respreqd:1; - u64 i_tt_bte_num:1; - u64 i_cbn:1; - u64 i_match:1; - u64 i_rpcnt_lt_34:1; - u64 i_rpcnt_ge_34:1; - u64 i_rpcnt_lt_18:1; - u64 i_rpcnt_ge_18:1; - u64 i_rpcnt_lt_2:1; - u64 i_rpcnt_ge_2:1; - u64 i_rqcnt_lt_18:1; - u64 i_rqcnt_ge_18:1; - u64 i_rqcnt_lt_2:1; - u64 i_rqcnt_ge_2:1; - u64 i_tt_device:7; - u64 i_tt_init:3; - u64 i_reserved:5; - } ii_icsmh_fld_s; -} ii_icsmh_u_t; - -/************************************************************************ - * * - * The Shub DEBUG unit provides a 3-bit selection signal to the * - * II core and a 3-bit selection signal to the fsbclk domain in the II * - * wrapper. * - * * - ************************************************************************/ - -typedef union ii_idbss_u { - u64 ii_idbss_regval; - struct { - u64 i_iioclk_core_submenu:3; - u64 i_rsvd:5; - u64 i_fsbclk_wrapper_submenu:3; - u64 i_rsvd_1:5; - u64 i_iioclk_menu:5; - u64 i_rsvd_2:43; - } ii_idbss_fld_s; -} ii_idbss_u_t; - -/************************************************************************ - * * - * Description: This register is used to set up the length for a * - * transfer and then to monitor the progress of that transfer. This * - * register needs to be initialized before a transfer is started. A * - * legitimate write to this register will set the Busy bit, clear the * - * Error bit, and initialize the length to the value desired. * - * While the transfer is in progress, hardware will decrement the * - * length field with each successful block that is copied. Once the * - * transfer completes, hardware will clear the Busy bit. The length * - * field will also contain the number of cache lines left to be * - * transferred. * - * * - ************************************************************************/ - -typedef union ii_ibls0_u { - u64 ii_ibls0_regval; - struct { - u64 i_length:16; - u64 i_error:1; - u64 i_rsvd_1:3; - u64 i_busy:1; - u64 i_rsvd:43; - } ii_ibls0_fld_s; -} ii_ibls0_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibsa0_u { - u64 ii_ibsa0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibsa0_fld_s; -} ii_ibsa0_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibda0_u { - u64 ii_ibda0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibda0_fld_s; -} ii_ibda0_u_t; - -/************************************************************************ - * * - * Writing to this register sets up the attributes of the transfer * - * and initiates the transfer operation. Reading this register has * - * the side effect of terminating any transfer in progress. Note: * - * stopping a transfer midstream could have an adverse impact on the * - * other BTE. If a BTE stream has to be stopped (due to error * - * handling for example), both BTE streams should be stopped and * - * their transfers discarded. * - * * - ************************************************************************/ - -typedef union ii_ibct0_u { - u64 ii_ibct0_regval; - struct { - u64 i_zerofill:1; - u64 i_rsvd_2:3; - u64 i_notify:1; - u64 i_rsvd_1:3; - u64 i_poison:1; - u64 i_rsvd:55; - } ii_ibct0_fld_s; -} ii_ibct0_u_t; - -/************************************************************************ - * * - * This register contains the address to which the WINV is sent. * - * This address has to be cache line aligned. * - * * - ************************************************************************/ - -typedef union ii_ibna0_u { - u64 ii_ibna0_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:42; - u64 i_rsvd:15; - } ii_ibna0_fld_s; -} ii_ibna0_u_t; - -/************************************************************************ - * * - * This register contains the programmable level as well as the node * - * ID and PI unit of the processor to which the interrupt will be * - * sent. * - * * - ************************************************************************/ - -typedef union ii_ibia0_u { - u64 ii_ibia0_regval; - struct { - u64 i_rsvd_2:1; - u64 i_node_id:11; - u64 i_rsvd_1:4; - u64 i_level:7; - u64 i_rsvd:41; - } ii_ibia0_fld_s; -} ii_ibia0_u_t; - -/************************************************************************ - * * - * Description: This register is used to set up the length for a * - * transfer and then to monitor the progress of that transfer. This * - * register needs to be initialized before a transfer is started. A * - * legitimate write to this register will set the Busy bit, clear the * - * Error bit, and initialize the length to the value desired. * - * While the transfer is in progress, hardware will decrement the * - * length field with each successful block that is copied. Once the * - * transfer completes, hardware will clear the Busy bit. The length * - * field will also contain the number of cache lines left to be * - * transferred. * - * * - ************************************************************************/ - -typedef union ii_ibls1_u { - u64 ii_ibls1_regval; - struct { - u64 i_length:16; - u64 i_error:1; - u64 i_rsvd_1:3; - u64 i_busy:1; - u64 i_rsvd:43; - } ii_ibls1_fld_s; -} ii_ibls1_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibsa1_u { - u64 ii_ibsa1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibsa1_fld_s; -} ii_ibsa1_u_t; - -/************************************************************************ - * * - * This register should be loaded before a transfer is started. The * - * address to be loaded in bits 39:0 is the 40-bit TRex+ physical * - * address as described in Section 1.3, Figure2 and Figure3. Since * - * the bottom 7 bits of the address are always taken to be zero, BTE * - * transfers are always cacheline-aligned. * - * * - ************************************************************************/ - -typedef union ii_ibda1_u { - u64 ii_ibda1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibda1_fld_s; -} ii_ibda1_u_t; - -/************************************************************************ - * * - * Writing to this register sets up the attributes of the transfer * - * and initiates the transfer operation. Reading this register has * - * the side effect of terminating any transfer in progress. Note: * - * stopping a transfer midstream could have an adverse impact on the * - * other BTE. If a BTE stream has to be stopped (due to error * - * handling for example), both BTE streams should be stopped and * - * their transfers discarded. * - * * - ************************************************************************/ - -typedef union ii_ibct1_u { - u64 ii_ibct1_regval; - struct { - u64 i_zerofill:1; - u64 i_rsvd_2:3; - u64 i_notify:1; - u64 i_rsvd_1:3; - u64 i_poison:1; - u64 i_rsvd:55; - } ii_ibct1_fld_s; -} ii_ibct1_u_t; - -/************************************************************************ - * * - * This register contains the address to which the WINV is sent. * - * This address has to be cache line aligned. * - * * - ************************************************************************/ - -typedef union ii_ibna1_u { - u64 ii_ibna1_regval; - struct { - u64 i_rsvd_1:7; - u64 i_addr:33; - u64 i_rsvd:24; - } ii_ibna1_fld_s; -} ii_ibna1_u_t; - -/************************************************************************ - * * - * This register contains the programmable level as well as the node * - * ID and PI unit of the processor to which the interrupt will be * - * sent. * - * * - ************************************************************************/ - -typedef union ii_ibia1_u { - u64 ii_ibia1_regval; - struct { - u64 i_pi_id:1; - u64 i_node_id:8; - u64 i_rsvd_1:7; - u64 i_level:7; - u64 i_rsvd:41; - } ii_ibia1_fld_s; -} ii_ibia1_u_t; - -/************************************************************************ - * * - * This register defines the resources that feed information into * - * the two performance counters located in the IO Performance * - * Profiling Register. There are 17 different quantities that can be * - * measured. Given these 17 different options, the two performance * - * counters have 15 of them in common; menu selections 0 through 0xE * - * are identical for each performance counter. As for the other two * - * options, one is available from one performance counter and the * - * other is available from the other performance counter. Hence, the * - * II supports all 17*16=272 possible combinations of quantities to * - * measure. * - * * - ************************************************************************/ - -typedef union ii_ipcr_u { - u64 ii_ipcr_regval; - struct { - u64 i_ippr0_c:4; - u64 i_ippr1_c:4; - u64 i_icct:8; - u64 i_rsvd:48; - } ii_ipcr_fld_s; -} ii_ipcr_u_t; - -/************************************************************************ - * * - * * - * * - ************************************************************************/ - -typedef union ii_ippr_u { - u64 ii_ippr_regval; - struct { - u64 i_ippr0:32; - u64 i_ippr1:32; - } ii_ippr_fld_s; -} ii_ippr_u_t; - -/************************************************************************ - * * - * The following defines which were not formed into structures are * - * probably identical to another register, and the name of the * - * register is provided against each of these registers. This * - * information needs to be checked carefully * - * * - * IIO_ICRB1_A IIO_ICRB0_A * - * IIO_ICRB1_B IIO_ICRB0_B * - * IIO_ICRB1_C IIO_ICRB0_C * - * IIO_ICRB1_D IIO_ICRB0_D * - * IIO_ICRB1_E IIO_ICRB0_E * - * IIO_ICRB2_A IIO_ICRB0_A * - * IIO_ICRB2_B IIO_ICRB0_B * - * IIO_ICRB2_C IIO_ICRB0_C * - * IIO_ICRB2_D IIO_ICRB0_D * - * IIO_ICRB2_E IIO_ICRB0_E * - * IIO_ICRB3_A IIO_ICRB0_A * - * IIO_ICRB3_B IIO_ICRB0_B * - * IIO_ICRB3_C IIO_ICRB0_C * - * IIO_ICRB3_D IIO_ICRB0_D * - * IIO_ICRB3_E IIO_ICRB0_E * - * IIO_ICRB4_A IIO_ICRB0_A * - * IIO_ICRB4_B IIO_ICRB0_B * - * IIO_ICRB4_C IIO_ICRB0_C * - * IIO_ICRB4_D IIO_ICRB0_D * - * IIO_ICRB4_E IIO_ICRB0_E * - * IIO_ICRB5_A IIO_ICRB0_A * - * IIO_ICRB5_B IIO_ICRB0_B * - * IIO_ICRB5_C IIO_ICRB0_C * - * IIO_ICRB5_D IIO_ICRB0_D * - * IIO_ICRB5_E IIO_ICRB0_E * - * IIO_ICRB6_A IIO_ICRB0_A * - * IIO_ICRB6_B IIO_ICRB0_B * - * IIO_ICRB6_C IIO_ICRB0_C * - * IIO_ICRB6_D IIO_ICRB0_D * - * IIO_ICRB6_E IIO_ICRB0_E * - * IIO_ICRB7_A IIO_ICRB0_A * - * IIO_ICRB7_B IIO_ICRB0_B * - * IIO_ICRB7_C IIO_ICRB0_C * - * IIO_ICRB7_D IIO_ICRB0_D * - * IIO_ICRB7_E IIO_ICRB0_E * - * IIO_ICRB8_A IIO_ICRB0_A * - * IIO_ICRB8_B IIO_ICRB0_B * - * IIO_ICRB8_C IIO_ICRB0_C * - * IIO_ICRB8_D IIO_ICRB0_D * - * IIO_ICRB8_E IIO_ICRB0_E * - * IIO_ICRB9_A IIO_ICRB0_A * - * IIO_ICRB9_B IIO_ICRB0_B * - * IIO_ICRB9_C IIO_ICRB0_C * - * IIO_ICRB9_D IIO_ICRB0_D * - * IIO_ICRB9_E IIO_ICRB0_E * - * IIO_ICRBA_A IIO_ICRB0_A * - * IIO_ICRBA_B IIO_ICRB0_B * - * IIO_ICRBA_C IIO_ICRB0_C * - * IIO_ICRBA_D IIO_ICRB0_D * - * IIO_ICRBA_E IIO_ICRB0_E * - * IIO_ICRBB_A IIO_ICRB0_A * - * IIO_ICRBB_B IIO_ICRB0_B * - * IIO_ICRBB_C IIO_ICRB0_C * - * IIO_ICRBB_D IIO_ICRB0_D * - * IIO_ICRBB_E IIO_ICRB0_E * - * IIO_ICRBC_A IIO_ICRB0_A * - * IIO_ICRBC_B IIO_ICRB0_B * - * IIO_ICRBC_C IIO_ICRB0_C * - * IIO_ICRBC_D IIO_ICRB0_D * - * IIO_ICRBC_E IIO_ICRB0_E * - * IIO_ICRBD_A IIO_ICRB0_A * - * IIO_ICRBD_B IIO_ICRB0_B * - * IIO_ICRBD_C IIO_ICRB0_C * - * IIO_ICRBD_D IIO_ICRB0_D * - * IIO_ICRBD_E IIO_ICRB0_E * - * IIO_ICRBE_A IIO_ICRB0_A * - * IIO_ICRBE_B IIO_ICRB0_B * - * IIO_ICRBE_C IIO_ICRB0_C * - * IIO_ICRBE_D IIO_ICRB0_D * - * IIO_ICRBE_E IIO_ICRB0_E * - * * - ************************************************************************/ - -/* - * Slightly friendlier names for some common registers. - */ -#define IIO_WIDGET IIO_WID /* Widget identification */ -#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */ -#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */ -#define IIO_PROTECT IIO_ILAPR /* IO interface protection */ -#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */ -#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */ -#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */ -#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */ -#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */ -#define IIO_LLP_LOG IIO_ILLR /* LLP log */ -#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */ -#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */ -#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */ -#define IIO_IGFX_0 IIO_IGFX0 -#define IIO_IGFX_1 IIO_IGFX1 -#define IIO_IBCT_0 IIO_IBCT0 -#define IIO_IBCT_1 IIO_IBCT1 -#define IIO_IBLS_0 IIO_IBLS0 -#define IIO_IBLS_1 IIO_IBLS1 -#define IIO_IBSA_0 IIO_IBSA0 -#define IIO_IBSA_1 IIO_IBSA1 -#define IIO_IBDA_0 IIO_IBDA0 -#define IIO_IBDA_1 IIO_IBDA1 -#define IIO_IBNA_0 IIO_IBNA0 -#define IIO_IBNA_1 IIO_IBNA1 -#define IIO_IBIA_0 IIO_IBIA0 -#define IIO_IBIA_1 IIO_IBIA1 -#define IIO_IOPRB_0 IIO_IPRB0 - -#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x))) -#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x))) -#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */ -#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */ -#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */ - -#define IIO_NUM_IPRBS 9 - -#define IIO_LLP_CSR_IS_UP 0x00002000 -#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000 -#define IIO_LLP_CSR_LLP_STAT_SHFT 12 - -#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */ -#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */ - -/* key to IIO_PROTECT_OVRRD */ -#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */ - -/* BTE register names */ -#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */ -#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */ -#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */ -#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */ -#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */ -#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */ -#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */ -#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */ - -/* BTE register offsets from base */ -#define BTEOFF_STAT 0 -#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0) -#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0) -#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0) -#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0) -#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0) - -/* names used in shub diags */ -#define IIO_BASE_BTE0 IIO_IBLS_0 -#define IIO_BASE_BTE1 IIO_IBLS_1 - -/* - * Macro which takes the widget number, and returns the - * IO PRB address of that widget. - * value _x is expected to be a widget number in the range - * 0, 8 - 0xF - */ -#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \ - (_x) : \ - (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) ) - -/* GFX Flow Control Node/Widget Register */ -#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */ -#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1) -#define IIO_IGFX_W_NUM_SHIFT 0 -#define IIO_IGFX_PI_NUM_BITS 1 /* size of PI num field */ -#define IIO_IGFX_PI_NUM_MASK ((1<<IIO_IGFX_PI_NUM_BITS)-1) -#define IIO_IGFX_PI_NUM_SHIFT 4 -#define IIO_IGFX_N_NUM_BITS 8 /* size of node num field */ -#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1) -#define IIO_IGFX_N_NUM_SHIFT 5 -#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */ -#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1) -#define IIO_IGFX_P_NUM_SHIFT 16 -#define IIO_IGFX_INIT(widget, pi, node, cpu) (\ - (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \ - (((pi) & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)| \ - (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \ - (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT)) - -/* Scratch registers (all bits available) */ -#define IIO_SCRATCH_REG0 IIO_ISCR0 -#define IIO_SCRATCH_REG1 IIO_ISCR1 -#define IIO_SCRATCH_MASK 0xffffffffffffffffUL - -#define IIO_SCRATCH_BIT0_0 0x0000000000000001UL -#define IIO_SCRATCH_BIT0_1 0x0000000000000002UL -#define IIO_SCRATCH_BIT0_2 0x0000000000000004UL -#define IIO_SCRATCH_BIT0_3 0x0000000000000008UL -#define IIO_SCRATCH_BIT0_4 0x0000000000000010UL -#define IIO_SCRATCH_BIT0_5 0x0000000000000020UL -#define IIO_SCRATCH_BIT0_6 0x0000000000000040UL -#define IIO_SCRATCH_BIT0_7 0x0000000000000080UL -#define IIO_SCRATCH_BIT0_8 0x0000000000000100UL -#define IIO_SCRATCH_BIT0_9 0x0000000000000200UL -#define IIO_SCRATCH_BIT0_A 0x0000000000000400UL - -#define IIO_SCRATCH_BIT1_0 0x0000000000000001UL -#define IIO_SCRATCH_BIT1_1 0x0000000000000002UL -/* IO Translation Table Entries */ -#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */ - /* Hw manuals number them 1..7! */ -/* - * IIO_IMEM Register fields. - */ -#define IIO_IMEM_W0ESD 0x1UL /* Widget 0 shut down due to error */ -#define IIO_IMEM_B0ESD (1UL << 4) /* BTE 0 shut down due to error */ -#define IIO_IMEM_B1ESD (1UL << 8) /* BTE 1 Shut down due to error */ - -/* - * As a permanent workaround for a bug in the PI side of the shub, we've - * redefined big window 7 as small window 0. - XXX does this still apply for SN1?? - */ -#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1) - -/* - * Use the top big window as a surrogate for the first small window - */ -#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW - -#define ILCSR_WARM_RESET 0x100 - -/* - * CRB manipulation macros - * The CRB macros are slightly complicated, since there are up to - * four registers associated with each CRB entry. - */ -#define IIO_NUM_CRBS 15 /* Number of CRBs */ -#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */ -#define IIO_ICRB_OFFSET 8 -#define IIO_ICRB_0 IIO_ICRB0_A -#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */ -/* XXX - This is now tuneable: - #define IIO_FIRST_PC_ENTRY 12 - */ - -#define IIO_ICRB_A(_x) ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x)))) -#define IIO_ICRB_B(_x) ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET)) -#define IIO_ICRB_C(_x) ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET)) -#define IIO_ICRB_D(_x) ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET)) -#define IIO_ICRB_E(_x) ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET)) - -#define TNUM_TO_WIDGET_DEV(_tnum) (_tnum & 0x7) - -/* - * values for "ecode" field - */ -#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */ -#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */ -#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access - * e.g. WINV to a Read only line. */ -#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */ -#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */ -#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */ -#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */ -#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */ - -/* - * Values for field imsgtype - */ -#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming message from Xtalk */ -#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */ -#define IIO_ICRB_IMSGT_SN1NET 2 /* Incoming message from SN1 net */ -#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */ - -/* - * values for field initiator. - */ -#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */ -#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */ -#define IIO_ICRB_INIT_SN1NET 0x2 /* Message originated in SN1net */ -#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */ -#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */ - -/* - * Number of credits Hub widget has while sending req/response to - * xbow. - * Value of 3 is required by Xbow 1.1 - * We may be able to increase this to 4 with Xbow 1.2. - */ -#define HUBII_XBOW_CREDIT 3 -#define HUBII_XBOW_REV2_CREDIT 4 - -/* - * Number of credits that xtalk devices should use when communicating - * with a SHub (depth of SHub's queue). - */ -#define HUB_CREDIT 4 - -/* - * Some IIO_PRB fields - */ -#define IIO_PRB_MULTI_ERR (1LL << 63) -#define IIO_PRB_SPUR_RD (1LL << 51) -#define IIO_PRB_SPUR_WR (1LL << 50) -#define IIO_PRB_RD_TO (1LL << 49) -#define IIO_PRB_ERROR (1LL << 48) - -/************************************************************************* - - Some of the IIO field masks and shifts are defined here. - This is in order to maintain compatibility in SN0 and SN1 code - -**************************************************************************/ - -/* - * ICMR register fields - * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not - * present in SHub) - */ - -#define IIO_ICMR_CRB_VLD_SHFT 20 -#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT) - -#define IIO_ICMR_FC_CNT_SHFT 16 -#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT) - -#define IIO_ICMR_C_CNT_SHFT 4 -#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT) - -#define IIO_ICMR_PRECISE (1UL << 52) -#define IIO_ICMR_CLR_RPPD (1UL << 13) -#define IIO_ICMR_CLR_RQPD (1UL << 12) - -/* - * IIO PIO Deallocation register field masks : (IIO_IPDR) - XXX present but not needed in bedrock? See the manual. - */ -#define IIO_IPDR_PND (1 << 4) - -/* - * IIO CRB deallocation register field masks: (IIO_ICDR) - */ -#define IIO_ICDR_PND (1 << 4) - -/* - * IO BTE Length/Status (IIO_IBLS) register bit field definitions - */ -#define IBLS_BUSY (0x1UL << 20) -#define IBLS_ERROR_SHFT 16 -#define IBLS_ERROR (0x1UL << IBLS_ERROR_SHFT) -#define IBLS_LENGTH_MASK 0xffff - -/* - * IO BTE Control/Terminate register (IBCT) register bit field definitions - */ -#define IBCT_POISON (0x1UL << 8) -#define IBCT_NOTIFY (0x1UL << 4) -#define IBCT_ZFIL_MODE (0x1UL << 0) - -/* - * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2) - */ -#define IIEPH1_VALID (1UL << 44) -#define IIEPH1_OVERRUN (1UL << 40) -#define IIEPH1_ERR_TYPE_SHFT 32 -#define IIEPH1_ERR_TYPE_MASK 0xf -#define IIEPH1_SOURCE_SHFT 20 -#define IIEPH1_SOURCE_MASK 11 -#define IIEPH1_SUPPL_SHFT 8 -#define IIEPH1_SUPPL_MASK 11 -#define IIEPH1_CMD_SHFT 0 -#define IIEPH1_CMD_MASK 7 - -#define IIEPH2_TAIL (1UL << 40) -#define IIEPH2_ADDRESS_SHFT 0 -#define IIEPH2_ADDRESS_MASK 38 - -#define IIEPH1_ERR_SHORT_REQ 2 -#define IIEPH1_ERR_SHORT_REPLY 3 -#define IIEPH1_ERR_LONG_REQ 4 -#define IIEPH1_ERR_LONG_REPLY 5 - -/* - * IO Error Clear register bit field definitions - */ -#define IECLR_PI1_FWD_INT (1UL << 31) /* clear PI1_FORWARD_INT in iidsr */ -#define IECLR_PI0_FWD_INT (1UL << 30) /* clear PI0_FORWARD_INT in iidsr */ -#define IECLR_SPUR_RD_HDR (1UL << 29) /* clear valid bit in ixss reg */ -#define IECLR_BTE1 (1UL << 18) /* clear bte error 1 */ -#define IECLR_BTE0 (1UL << 17) /* clear bte error 0 */ -#define IECLR_CRAZY (1UL << 16) /* clear crazy bit in wstat reg */ -#define IECLR_PRB_F (1UL << 15) /* clear err bit in PRB_F reg */ -#define IECLR_PRB_E (1UL << 14) /* clear err bit in PRB_E reg */ -#define IECLR_PRB_D (1UL << 13) /* clear err bit in PRB_D reg */ -#define IECLR_PRB_C (1UL << 12) /* clear err bit in PRB_C reg */ -#define IECLR_PRB_B (1UL << 11) /* clear err bit in PRB_B reg */ -#define IECLR_PRB_A (1UL << 10) /* clear err bit in PRB_A reg */ -#define IECLR_PRB_9 (1UL << 9) /* clear err bit in PRB_9 reg */ -#define IECLR_PRB_8 (1UL << 8) /* clear err bit in PRB_8 reg */ -#define IECLR_PRB_0 (1UL << 0) /* clear err bit in PRB_0 reg */ - -/* - * IIO CRB control register Fields: IIO_ICCR - */ -#define IIO_ICCR_PENDING 0x10000 -#define IIO_ICCR_CMD_MASK 0xFF -#define IIO_ICCR_CMD_SHFT 7 -#define IIO_ICCR_CMD_NOP 0x0 /* No Op */ -#define IIO_ICCR_CMD_WAKE 0x100 /* Reactivate CRB entry and process */ -#define IIO_ICCR_CMD_TIMEOUT 0x200 /* Make CRB timeout & mark invalid */ -#define IIO_ICCR_CMD_EJECT 0x400 /* Contents of entry written to memory - * via a WB - */ -#define IIO_ICCR_CMD_FLUSH 0x800 - -/* - * - * CRB Register description. - * - * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING - * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING - * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING - * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING - * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING - * - * Many of the fields in CRB are status bits used by hardware - * for implementation of the protocol. It's very dangerous to - * mess around with the CRB registers. - * - * It's OK to read the CRB registers and try to make sense out of the - * fields in CRB. - * - * Updating CRB requires all activities in Hub IIO to be quiesced. - * otherwise, a write to CRB could corrupt other CRB entries. - * CRBs are here only as a back door peek to shub IIO's status. - * Quiescing implies no dmas no PIOs - * either directly from the cpu or from sn0net. - * this is not something that can be done easily. So, AVOID updating - * CRBs. - */ - -/* - * Easy access macros for CRBs, all 5 registers (A-E) - */ -typedef ii_icrb0_a_u_t icrba_t; -#define a_sidn ii_icrb0_a_fld_s.ia_sidn -#define a_tnum ii_icrb0_a_fld_s.ia_tnum -#define a_addr ii_icrb0_a_fld_s.ia_addr -#define a_valid ii_icrb0_a_fld_s.ia_vld -#define a_iow ii_icrb0_a_fld_s.ia_iow -#define a_regvalue ii_icrb0_a_regval - -typedef ii_icrb0_b_u_t icrbb_t; -#define b_use_old ii_icrb0_b_fld_s.ib_use_old -#define b_imsgtype ii_icrb0_b_fld_s.ib_imsgtype -#define b_imsg ii_icrb0_b_fld_s.ib_imsg -#define b_initiator ii_icrb0_b_fld_s.ib_init -#define b_exc ii_icrb0_b_fld_s.ib_exc -#define b_ackcnt ii_icrb0_b_fld_s.ib_ack_cnt -#define b_resp ii_icrb0_b_fld_s.ib_resp -#define b_ack ii_icrb0_b_fld_s.ib_ack -#define b_hold ii_icrb0_b_fld_s.ib_hold -#define b_wb ii_icrb0_b_fld_s.ib_wb -#define b_intvn ii_icrb0_b_fld_s.ib_intvn -#define b_stall_ib ii_icrb0_b_fld_s.ib_stall_ib -#define b_stall_int ii_icrb0_b_fld_s.ib_stall__intr -#define b_stall_bte_0 ii_icrb0_b_fld_s.ib_stall__bte_0 -#define b_stall_bte_1 ii_icrb0_b_fld_s.ib_stall__bte_1 -#define b_error ii_icrb0_b_fld_s.ib_error -#define b_ecode ii_icrb0_b_fld_s.ib_errcode -#define b_lnetuce ii_icrb0_b_fld_s.ib_ln_uce -#define b_mark ii_icrb0_b_fld_s.ib_mark -#define b_xerr ii_icrb0_b_fld_s.ib_xt_err -#define b_regvalue ii_icrb0_b_regval - -typedef ii_icrb0_c_u_t icrbc_t; -#define c_suppl ii_icrb0_c_fld_s.ic_suppl -#define c_barrop ii_icrb0_c_fld_s.ic_bo -#define c_doresp ii_icrb0_c_fld_s.ic_resprqd -#define c_gbr ii_icrb0_c_fld_s.ic_gbr -#define c_btenum ii_icrb0_c_fld_s.ic_bte_num -#define c_cohtrans ii_icrb0_c_fld_s.ic_ct -#define c_xtsize ii_icrb0_c_fld_s.ic_size -#define c_source ii_icrb0_c_fld_s.ic_source -#define c_regvalue ii_icrb0_c_regval - -typedef ii_icrb0_d_u_t icrbd_t; -#define d_sleep ii_icrb0_d_fld_s.id_sleep -#define d_pricnt ii_icrb0_d_fld_s.id_pr_cnt -#define d_pripsc ii_icrb0_d_fld_s.id_pr_psc -#define d_bteop ii_icrb0_d_fld_s.id_bte_op -#define d_bteaddr ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */ -#define d_benable ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */ -#define d_regvalue ii_icrb0_d_regval - -typedef ii_icrb0_e_u_t icrbe_t; -#define icrbe_ctxtvld ii_icrb0_e_fld_s.ie_cvld -#define icrbe_toutvld ii_icrb0_e_fld_s.ie_tvld -#define icrbe_context ii_icrb0_e_fld_s.ie_context -#define icrbe_timeout ii_icrb0_e_fld_s.ie_timeout -#define e_regvalue ii_icrb0_e_regval - -/* Number of widgets supported by shub */ -#define HUB_NUM_WIDGET 9 -#define HUB_WIDGET_ID_MIN 0x8 -#define HUB_WIDGET_ID_MAX 0xf - -#define HUB_WIDGET_PART_NUM 0xc120 -#define MAX_HUBS_PER_XBOW 2 - -/* A few more #defines for backwards compatibility */ -#define iprb_t ii_iprb0_u_t -#define iprb_regval ii_iprb0_regval -#define iprb_mult_err ii_iprb0_fld_s.i_mult_err -#define iprb_spur_rd ii_iprb0_fld_s.i_spur_rd -#define iprb_spur_wr ii_iprb0_fld_s.i_spur_wr -#define iprb_rd_to ii_iprb0_fld_s.i_rd_to -#define iprb_ovflow ii_iprb0_fld_s.i_of_cnt -#define iprb_error ii_iprb0_fld_s.i_error -#define iprb_ff ii_iprb0_fld_s.i_f -#define iprb_mode ii_iprb0_fld_s.i_m -#define iprb_bnakctr ii_iprb0_fld_s.i_nb -#define iprb_anakctr ii_iprb0_fld_s.i_na -#define iprb_xtalkctr ii_iprb0_fld_s.i_c - -#define LNK_STAT_WORKING 0x2 /* LLP is working */ - -#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */ -#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */ -#define IIO_WSTAT_TXRETRY_MASK 0x7F /* should be 0xFF?? */ -#define IIO_WSTAT_TXRETRY_SHFT 16 -#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \ - IIO_WSTAT_TXRETRY_MASK) - -/* Number of II perf. counters we can multiplex at once */ - -#define IO_PERF_SETS 32 - -/* Bit for the widget in inbound access register */ -#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w)) -/* Bit for the widget in outbound access register */ -#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w)) - -/* NOTE: The following define assumes that we are going to get - * widget numbers from 8 thru F and the device numbers within - * widget from 0 thru 7. - */ -#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d)))) - -/* IO Interrupt Destination Register */ -#define IIO_IIDSR_SENT_SHIFT 28 -#define IIO_IIDSR_SENT_MASK 0x30000000 -#define IIO_IIDSR_ENB_SHIFT 24 -#define IIO_IIDSR_ENB_MASK 0x01000000 -#define IIO_IIDSR_NODE_SHIFT 9 -#define IIO_IIDSR_NODE_MASK 0x000ff700 -#define IIO_IIDSR_PI_ID_SHIFT 8 -#define IIO_IIDSR_PI_ID_MASK 0x00000100 -#define IIO_IIDSR_LVL_SHIFT 0 -#define IIO_IIDSR_LVL_MASK 0x000000ff - -/* Xtalk timeout threshold register (IIO_IXTT) */ -#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */ -#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT) -#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */ -#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT) -#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */ -#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT) - -/* - * The IO LLP control status register and widget control register - */ - -typedef union hubii_wcr_u { - u64 wcr_reg_value; - struct { - u64 wcr_widget_id:4, /* LLP crossbar credit */ - wcr_tag_mode:1, /* Tag mode */ - wcr_rsvd1:8, /* Reserved */ - wcr_xbar_crd:3, /* LLP crossbar credit */ - wcr_f_bad_pkt:1, /* Force bad llp pkt enable */ - wcr_dir_con:1, /* widget direct connect */ - wcr_e_thresh:5, /* elasticity threshold */ - wcr_rsvd:41; /* unused */ - } wcr_fields_s; -} hubii_wcr_t; - -#define iwcr_dir_con wcr_fields_s.wcr_dir_con - -/* The structures below are defined to extract and modify the ii -performance registers */ - -/* io_perf_sel allows the caller to specify what tests will be - performed */ - -typedef union io_perf_sel { - u64 perf_sel_reg; - struct { - u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48; - } perf_sel_bits; -} io_perf_sel_t; - -/* io_perf_cnt is to extract the count from the shub registers. Due to - hardware problems there is only one counter, not two. */ - -typedef union io_perf_cnt { - u64 perf_cnt; - struct { - u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32; - } perf_cnt_bits; - -} io_perf_cnt_t; - -typedef union iprte_a { - u64 entry; - struct { - u64 i_rsvd_1:3; - u64 i_addr:38; - u64 i_init:3; - u64 i_source:8; - u64 i_rsvd:2; - u64 i_widget:4; - u64 i_to_cnt:5; - u64 i_vld:1; - } iprte_fields; -} iprte_a_t; - -#endif /* _ASM_IA64_SN_SHUBIO_H */ diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h deleted file mode 100644 index c2611f6cfe33..000000000000 --- a/arch/ia64/include/asm/sn/simulator.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_SIMULATOR_H -#define _ASM_IA64_SN_SIMULATOR_H - -#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) -#define SNMAGIC 0xaeeeeeee8badbeefL -#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) - -#define SIMULATOR_SLEEP() asm("nop.i 0x8beef") -#define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) -#define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) -extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ -#else -#define IS_MEDUSA() 0 -#define SIMULATOR_SLEEP() -#define IS_RUNNING_ON_SIMULATOR() 0 -#endif - -#endif /* _ASM_IA64_SN_SIMULATOR_H */ diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h deleted file mode 100644 index e61ebac38cdd..000000000000 --- a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved. - * - * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring - * SGI Altix node and router hardware - * - * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004 - */ - -#ifndef SN_HWPERF_H -#define SN_HWPERF_H - -/* - * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO - * return an array of these. Do not change this without also - * changing the corresponding SAL code. - */ -#define SN_HWPERF_MAXSTRING 128 -struct sn_hwperf_object_info { - u32 id; - union { - struct { - u64 this_part:1; - u64 is_shared:1; - } fields; - struct { - u64 flags; - u64 reserved; - } b; - } f; - char name[SN_HWPERF_MAXSTRING]; - char location[SN_HWPERF_MAXSTRING]; - u32 ports; -}; - -#define sn_hwp_this_part f.fields.this_part -#define sn_hwp_is_shared f.fields.is_shared -#define sn_hwp_flags f.b.flags - -/* macros for object classification */ -#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub")) -#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2.")) -#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO")) -#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router")) -#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router")) -#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router")) -#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \ - SN_HWPERF_IS_NL4ROUTER(x) || \ - SN_HWPERF_IS_OLDROUTER(x)) -#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared) -#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\ - (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\ - (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y))) - -/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */ -struct sn_hwperf_port_info { - u32 port; - u32 conn_id; - u32 conn_port; -}; - -/* for HWPERF_{GET,SET}_MMRS */ -struct sn_hwperf_data { - u64 addr; - u64 data; -}; - -/* user ioctl() argument, see below */ -struct sn_hwperf_ioctl_args { - u64 arg; /* argument, usually an object id */ - u64 sz; /* size of transfer */ - void *ptr; /* pointer to source/target */ - u32 v0; /* second return value */ -}; - -/* - * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE, - * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which - * to call SAL, and whether to use an interprocessor interrupt - * or task migration in order to do so. If the CPU specified is - * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used. - */ -#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL -#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL -#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL -#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL - -/* - * ioctl requests on the "sn_hwperf" misc device that call SAL. - */ -#define SN_HWPERF_OP_MEM_COPYIN 0x1000 -#define SN_HWPERF_OP_MEM_COPYOUT 0x2000 -#define SN_HWPERF_OP_MASK 0x0fff - -/* - * Determine mem requirement. - * arg don't care - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_HEAPSIZE 1 - -/* - * Install mem for SAL drvr - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to buffer for scratch area - */ -#define SN_HWPERF_INSTALL_HEAP 2 - -/* - * Determine number of objects - * arg don't care - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Determine object "distance", relative to a cpu. This operation can - * execute on a designated logical cpu number, using either an IPI or - * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then - * the current CPU is used. See the SN_HWPERF_ARG_* macros above. - * - * arg bitmap of IPI flag, cpu number and object id - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Enumerate objects. Special case if sz == 8, returns the required - * buffer size. - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_object_info - */ -#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Enumerate NumaLink ports for an object. Special case if sz == 8, - * returns the required buffer size. - * arg object id - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_port_info - */ -#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * SET/GET memory mapped registers. These operations can execute - * on a designated logical cpu number, using either an IPI or via - * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then - * the current CPU is used. See the SN_HWPERF_ARG_* macros above. - * - * arg bitmap of ipi flag, cpu number and object id - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_data - */ -#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN) -#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \ - SN_HWPERF_OP_MEM_COPYIN) -/* - * Lock a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_ACQUIRE 16 - -/* - * Unlock a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_RELEASE 17 - -/* - * Break a lock on a shared object - * arg object id - * sz don't care - * p don't care - */ -#define SN_HWPERF_FORCE_RELEASE 18 - -/* - * ioctl requests on "sn_hwperf" that do not call SAL - */ - -/* - * get cpu info as an array of hwperf_object_info_t. - * id is logical CPU number, name is description, location - * is geoid (e.g. 001c04#1c). Special case if sz == 8, - * returns the required buffer size. - * - * arg don't care - * sz sizeof buffer pointed to by p - * p pointer to array of struct sn_hwperf_object_info - */ -#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given an object id, return it's node number (aka cnode). - * arg object id - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given a node number (cnode), return it's nasid. - * arg ordinal node number (aka cnodeid) - * sz 8 - * p pointer to u64 integer - */ -#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT) - -/* - * Given a node id, determine the id of the nearest node with CPUs - * and the id of the nearest node that has memory. The argument - * node would normally be a "headless" node, e.g. an "IO node". - * Return 0 on success. - */ -extern int sn_hwperf_get_nearest_node(cnodeid_t node, - cnodeid_t *near_mem, cnodeid_t *near_cpu); - -/* return codes */ -#define SN_HWPERF_OP_OK 0 -#define SN_HWPERF_OP_NOMEM 1 -#define SN_HWPERF_OP_NO_PERM 2 -#define SN_HWPERF_OP_IO_ERROR 3 -#define SN_HWPERF_OP_BUSY 4 -#define SN_HWPERF_OP_RECONFIGURE 253 -#define SN_HWPERF_OP_INVAL 254 - -int sn_topology_open(struct inode *inode, struct file *file); -int sn_topology_release(struct inode *inode, struct file *file); -#endif /* SN_HWPERF_H */ diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h deleted file mode 100644 index a676dd9ace3e..000000000000 --- a/arch/ia64/include/asm/sn/sn_cpuid.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved. - */ - - -#ifndef _ASM_IA64_SN_SN_CPUID_H -#define _ASM_IA64_SN_SN_CPUID_H - -#include <linux/smp.h> -#include <asm/sn/addrs.h> -#include <asm/sn/pda.h> -#include <asm/intrinsics.h> - - -/* - * Functions for converting between cpuids, nodeids and NASIDs. - * - * These are for SGI platforms only. - * - */ - - - - -/* - * Definitions of terms (these definitions are for IA64 ONLY. Other architectures - * use cpuid/cpunum quite defferently): - * - * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies - * the cpu. The value cpuid has no significance on IA64 other than - * the boot cpu is 0. - * smp_processor_id() returns the cpuid of the current cpu. - * - * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID) - * This is the same as 31:24 of the processor LID register - * hard_smp_processor_id()- cpu_physical_id of current processor - * cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid> - * cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> - * * not real efficient - don't use in perf critical code - * - * SLICE - a number in the range of 0 - 3 (typically) that represents the - * cpu number on a brick. - * - * SUBNODE - (almost obsolete) the number of the FSB that a cpu is - * connected to. This is also the same as the PI number. Usually 0 or 1. - * - * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no - * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM. - * - * - * The macros convert between cpu physical ids & slice/nasid/cnodeid. - * These terms are described below: - * - * - * Brick - * ----- ----- ----- ----- CPU - * | 0 | | 1 | | 0 | | 1 | SLICE - * ----- ----- ----- ----- - * | | | | - * | | | | - * 0 | | 2 0 | | 2 FSB SLOT - * ------- ------- - * | | - * | | - * | | - * ------------ ------------- - * | | | | - * | SHUB | | SHUB | NASID (0..MAX_NASIDS) - * | |----- | | CNODEID (0..num_compact_nodes-1) - * | | | | - * | | | | - * ------------ ------------- - * | | - * - * - */ - -#define get_node_number(addr) NASID_GET(addr) - -/* - * NOTE: on non-MP systems, only cpuid 0 exists - */ - -extern short physical_node_map[]; /* indexed by nasid to get cnode */ - -/* - * Macros for retrieving info about current cpu - */ -#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid) -#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode) -#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice) -#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode) -#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff) - -/* - * Macros for retrieving info about an arbitrary cpu - * cpuid - logical cpu id - */ -#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid) -#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode) -#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice) - - -/* - * Dont use the following in performance critical code. They require scans - * of potentially large tables. - */ -extern int nasid_slice_to_cpuid(int, int); - -/* - * cnodeid_to_nasid - convert a cnodeid to a NASID - */ -#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid]) - -/* - * nasid_to_cnodeid - convert a NASID to a cnodeid - */ -#define nasid_to_cnodeid(nasid) (physical_node_map[nasid]) - -/* - * partition_coherence_id - get the coherence ID of the current partition - */ -extern u8 sn_coherency_id; -#define partition_coherence_id() (sn_coherency_id) - -#endif /* _ASM_IA64_SN_SN_CPUID_H */ - diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h deleted file mode 100644 index 8e83ac117ace..000000000000 --- a/arch/ia64/include/asm/sn/sn_feature_sets.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_IA64_SN_FEATURE_SETS_H -#define _ASM_IA64_SN_FEATURE_SETS_H - -/* - * SN PROM Features - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved. - */ - - -/* --------------------- PROM Features -----------------------------*/ -extern int sn_prom_feature_available(int id); - -#define MAX_PROM_FEATURE_SETS 2 - -/* - * The following defines features that may or may not be supported by the - * current PROM. The OS uses sn_prom_feature_available(feature) to test for - * the presence of a PROM feature. Down rev (old) PROMs will always test - * "false" for new features. - * - * Use: - * if (sn_prom_feature_available(PRF_XXX)) - * ... - */ - -#define PRF_PAL_CACHE_FLUSH_SAFE 0 -#define PRF_DEVICE_FLUSH_LIST 1 -#define PRF_HOTPLUG_SUPPORT 2 -#define PRF_CPU_DISABLE_SUPPORT 3 - -/* --------------------- OS Features -------------------------------*/ - -/* - * The following defines OS features that are optionally present in - * the operating system. - * During boot, PROM is notified of these features via a series of calls: - * - * ia64_sn_set_os_feature(feature1); - * - * Once enabled, a feature cannot be disabled. - * - * By default, features are disabled unless explicitly enabled. - * - * These defines must be kept in sync with the corresponding - * PROM definitions in feature_sets.h. - */ -#define OSF_MCA_SLV_TO_OS_INIT_SLV 0 -#define OSF_FEAT_LOG_SBES 1 -#define OSF_ACPI_ENABLE 2 -#define OSF_PCISEGMENT_ENABLE 3 - - -#endif /* _ASM_IA64_SN_FEATURE_SETS_H */ diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h index 1f5ff470a5a1..d437aa43343b 100644 --- a/arch/ia64/include/asm/sn/sn_sal.h +++ b/arch/ia64/include/asm/sn/sn_sal.h @@ -11,140 +11,17 @@ * Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved. */ - +#include <linux/types.h> #include <asm/sal.h> -#include <asm/sn/sn_cpuid.h> -#include <asm/sn/arch.h> -#include <asm/sn/geo.h> -#include <asm/sn/nodepda.h> -#include <asm/sn/shub_mmr.h> // SGI Specific Calls -#define SN_SAL_POD_MODE 0x02000001 -#define SN_SAL_SYSTEM_RESET 0x02000002 -#define SN_SAL_PROBE 0x02000003 -#define SN_SAL_GET_MASTER_NASID 0x02000004 -#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005 -#define SN_SAL_LOG_CE 0x02000006 -#define SN_SAL_REGISTER_CE 0x02000007 #define SN_SAL_GET_PARTITION_ADDR 0x02000009 -#define SN_SAL_XP_ADDR_REGION 0x0200000f -#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010 -#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011 -#define SN_SAL_PRINT_ERROR 0x02000012 -#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014 -#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant -#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant -#define SN_SAL_GET_SAPIC_INFO 0x0200001d -#define SN_SAL_GET_SN_INFO 0x0200001e -#define SN_SAL_CONSOLE_PUTC 0x02000021 -#define SN_SAL_CONSOLE_GETC 0x02000022 -#define SN_SAL_CONSOLE_PUTS 0x02000023 -#define SN_SAL_CONSOLE_GETS 0x02000024 -#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025 -#define SN_SAL_CONSOLE_POLL 0x02000026 -#define SN_SAL_CONSOLE_INTR 0x02000027 -#define SN_SAL_CONSOLE_PUTB 0x02000028 -#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a -#define SN_SAL_CONSOLE_READC 0x0200002b -#define SN_SAL_SYSCTL_OP 0x02000030 -#define SN_SAL_SYSCTL_MODID_GET 0x02000031 -#define SN_SAL_SYSCTL_GET 0x02000032 -#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033 -#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035 -#define SN_SAL_SYSCTL_SLAB_GET 0x02000036 -#define SN_SAL_BUS_CONFIG 0x02000037 -#define SN_SAL_SYS_SERIAL_GET 0x02000038 -#define SN_SAL_PARTITION_SERIAL_GET 0x02000039 -#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a -#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b -#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c -#define SN_SAL_COHERENCE 0x0200003d #define SN_SAL_MEMPROTECT 0x0200003e -#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f - -#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant -#define SN_SAL_IROUTER_OP 0x02000043 -#define SN_SAL_SYSCTL_EVENT 0x02000044 -#define SN_SAL_IOIF_INTERRUPT 0x0200004a -#define SN_SAL_HWPERF_OP 0x02000050 // lock -#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051 -#define SN_SAL_IOIF_PCI_SAFE 0x02000052 -#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053 -#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054 -#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055 -#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056 -#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057 -#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated -#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a - -#define SN_SAL_IOIF_INIT 0x0200005f -#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060 -#define SN_SAL_BTE_RECOVER 0x02000061 -#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062 -#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064 - -#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065 -#define SN_SAL_SET_OS_FEATURE_SET 0x02000066 -#define SN_SAL_INJECT_ERROR 0x02000067 -#define SN_SAL_SET_CPU_NUMBER 0x02000068 -#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069 #define SN_SAL_WATCHLIST_ALLOC 0x02000070 #define SN_SAL_WATCHLIST_FREE 0x02000071 /* - * Service-specific constants - */ - -/* Console interrupt manipulation */ - /* action codes */ -#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */ -#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */ -#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */ - /* interrupt specification & status return codes */ -#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */ -#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */ - -/* interrupt handling */ -#define SAL_INTR_ALLOC 1 -#define SAL_INTR_FREE 2 -#define SAL_INTR_REDIRECT 3 - -/* - * operations available on the generic SN_SAL_SYSCTL_OP - * runtime service - */ -#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */ -#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */ - -/* - * IRouter (i.e. generalized system controller) operations - */ -#define SAL_IROUTER_OPEN 0 /* open a subchannel */ -#define SAL_IROUTER_CLOSE 1 /* close a subchannel */ -#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */ -#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */ -#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for - * an open subchannel - */ -#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */ -#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */ -#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */ - -/* IRouter interrupt mask bits */ -#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT -#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV - -/* - * Error Handling Features - */ -#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete -#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete -#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4 -#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000 - -/* * SAL Error Codes */ #define SALRET_MORE_PASSES 1 @@ -153,458 +30,6 @@ #define SALRET_INVALID_ARG (-2) #define SALRET_ERROR (-3) -#define SN_SAL_FAKE_PROM 0x02009999 - -/** - * sn_sal_revision - get the SGI SAL revision number - * - * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor). - * This routine simply extracts the major and minor values and - * presents them in a u32 format. - * - * For example, version 4.05 would be represented at 0x0405. - */ -static inline u32 -sn_sal_rev(void) -{ - struct ia64_sal_systab *systab = __va(efi.sal_systab); - - return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor); -} - -/* - * Returns the master console nasid, if the call fails, return an illegal - * value. - */ -static inline u64 -ia64_sn_get_console_nasid(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0); - - if (ret_stuff.status < 0) - return ret_stuff.status; - - /* Master console nasid is in 'v0' */ - return ret_stuff.v0; -} - -/* - * Returns the master baseio nasid, if the call fails, return an illegal - * value. - */ -static inline u64 -ia64_sn_get_master_baseio_nasid(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0); - - if (ret_stuff.status < 0) - return ret_stuff.status; - - /* Master baseio nasid is in 'v0' */ - return ret_stuff.v0; -} - -static inline void * -ia64_sn_get_klconfig_addr(nasid_t nasid) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0); - return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL; -} - -/* - * Returns the next console character. - */ -static inline u64 -ia64_sn_console_getc(int *ch) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0); - - /* character is in 'v0' */ - *ch = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/* - * Read a character from the SAL console device, after a previous interrupt - * or poll operation has given us to know that a character is available - * to be read. - */ -static inline u64 -ia64_sn_console_readc(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0); - - /* character is in 'v0' */ - return ret_stuff.v0; -} - -/* - * Sends the given character to the console. - */ -static inline u64 -ia64_sn_console_putc(char ch) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Sends the given buffer to the console. - */ -static inline u64 -ia64_sn_console_putb(const char *buf, int len) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0); - - if ( ret_stuff.status == 0 ) { - return ret_stuff.v0; - } - return (u64)0; -} - -/* - * Print a platform error record - */ -static inline u64 -ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Check for Platform errors - */ -static inline u64 -ia64_sn_plat_cpei_handler(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Set Error Handling Features (Obsolete) - */ -static inline u64 -ia64_sn_plat_set_error_handling_features(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES, - SAL_ERR_FEAT_LOG_SBES, - 0, 0, 0, 0, 0, 0); - - return ret_stuff.status; -} - -/* - * Checks for console input. - */ -static inline u64 -ia64_sn_console_check(int *result) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0); - - /* result is in 'v0' */ - *result = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/* - * Checks console interrupt status - */ -static inline u64 -ia64_sn_console_intr_status(void) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - 0, SAL_CONSOLE_INTR_STATUS, - 0, 0, 0, 0, 0); - - if (ret_stuff.status == 0) { - return ret_stuff.v0; - } - - return 0; -} - -/* - * Enable an interrupt on the SAL console device. - */ -static inline void -ia64_sn_console_intr_enable(u64 intr) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - intr, SAL_CONSOLE_INTR_ON, - 0, 0, 0, 0, 0); -} - -/* - * Disable an interrupt on the SAL console device. - */ -static inline void -ia64_sn_console_intr_disable(u64 intr) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, - intr, SAL_CONSOLE_INTR_OFF, - 0, 0, 0, 0, 0); -} - -/* - * Sends a character buffer to the console asynchronously. - */ -static inline u64 -ia64_sn_console_xmit_chars(char *buf, int len) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS, - (u64)buf, (u64)len, - 0, 0, 0, 0, 0); - - if (ret_stuff.status == 0) { - return ret_stuff.v0; - } - - return 0; -} - -/* - * Returns the iobrick module Id - */ -static inline u64 -ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0); - - /* result is in 'v0' */ - *result = (int)ret_stuff.v0; - - return ret_stuff.status; -} - -/** - * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function - * - * SN_SAL_POD_MODE actually takes an argument, but it's always - * 0 when we call it from the kernel, so we don't have to expose - * it to the caller. - */ -static inline u64 -ia64_sn_pod_mode(void) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0); - if (isrv.status) - return 0; - return isrv.v0; -} - -/** - * ia64_sn_probe_mem - read from memory safely - * @addr: address to probe - * @size: number bytes to read (1,2,4,8) - * @data_ptr: address to store value read by probe (-1 returned if probe fails) - * - * Call into the SAL to do a memory read. If the read generates a machine - * check, this routine will recover gracefully and return -1 to the caller. - * @addr is usually a kernel virtual address in uncached space (i.e. the - * address starts with 0xc), but if called in physical mode, @addr should - * be a physical address. - * - * Return values: - * 0 - probe successful - * 1 - probe failed (generated MCA) - * 2 - Bad arg - * <0 - PAL error - */ -static inline u64 -ia64_sn_probe_mem(long addr, long size, void *data_ptr) -{ - struct ia64_sal_retval isrv; - - SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0); - - if (data_ptr) { - switch (size) { - case 1: - *((u8*)data_ptr) = (u8)isrv.v0; - break; - case 2: - *((u16*)data_ptr) = (u16)isrv.v0; - break; - case 4: - *((u32*)data_ptr) = (u32)isrv.v0; - break; - case 8: - *((u64*)data_ptr) = (u64)isrv.v0; - break; - default: - isrv.status = 2; - } - } - return isrv.status; -} - -/* - * Retrieve the system serial number as an ASCII string. - */ -static inline u64 -ia64_sn_sys_serial_get(char *buf) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -extern char sn_system_serial_number_string[]; -extern u64 sn_partition_serial_number; - -static inline char * -sn_system_serial_number(void) { - if (sn_system_serial_number_string[0]) { - return(sn_system_serial_number_string); - } else { - ia64_sn_sys_serial_get(sn_system_serial_number_string); - return(sn_system_serial_number_string); - } -} - - -/* - * Returns a unique id number for this system and partition (suitable for - * use with license managers), based in part on the system serial number. - */ -static inline u64 -ia64_sn_partition_serial_get(void) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0, - 0, 0, 0, 0, 0, 0); - if (ret_stuff.status != 0) - return 0; - return ret_stuff.v0; -} - -static inline u64 -sn_partition_serial_number_val(void) { - if (unlikely(sn_partition_serial_number == 0)) { - sn_partition_serial_number = ia64_sn_partition_serial_get(); - } - return sn_partition_serial_number; -} - -/* - * Returns the partition id of the nasid passed in as an argument, - * or INVALID_PARTID if the partition id cannot be retrieved. - */ -static inline partid_t -ia64_sn_sysctl_partition_get(nasid_t nasid) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid, - 0, 0, 0, 0, 0, 0); - if (ret_stuff.status != 0) - return -1; - return ((partid_t)ret_stuff.v0); -} - /* * Returns the physical address of the partition's reserved page through * an iterative number of calls. @@ -634,96 +59,6 @@ sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len) } /* - * Register or unregister a physical address range being referenced across - * a partition boundary for which certain SAL errors should be scanned for, - * cleaned up and ignored. This is of value for kernel partitioning code only. - * Values for the operation argument: - * 1 = register this address range with SAL - * 0 = unregister this address range with SAL - * - * SAL maintains a reference count on an address range in case it is registered - * multiple times. - * - * On success, returns the reference count of the address range after the SAL - * call has performed the current registration/unregistration. Returns a - * negative value if an error occurred. - */ -static inline int -sn_register_xp_addr_region(u64 paddr, u64 len, int operation) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len, - (u64)operation, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Register or unregister an instruction range for which SAL errors should - * be ignored. If an error occurs while in the registered range, SAL jumps - * to return_addr after ignoring the error. Values for the operation argument: - * 1 = register this instruction range with SAL - * 0 = unregister this instruction range with SAL - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr, - int virtual, int operation) -{ - struct ia64_sal_retval ret_stuff; - u64 call; - if (virtual) { - call = SN_SAL_NO_FAULT_ZONE_VIRTUAL; - } else { - call = SN_SAL_NO_FAULT_ZONE_PHYSICAL; - } - ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr, - (u64)1, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Register or unregister a function to handle a PMI received by a CPU. - * Before calling the registered handler, SAL sets r1 to the value that - * was passed in as the global_pointer. - * - * If the handler pointer is NULL, then the currently registered handler - * will be unregistered. - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_register_pmi_handler(u64 handler, u64 global_pointer) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler, - global_pointer, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* - * Change or query the coherence domain for this partition. Each cpu-based - * nasid is represented by a bit in an array of 64-bit words: - * 0 = not in this partition's coherency domain - * 1 = in this partition's coherency domain - * - * It is not possible for the local system's nasids to be removed from - * the coherency domain. Purpose of the domain arguments: - * new_domain = set the coherence domain to the given nasids - * old_domain = return the current coherence domain - * - * Returns 0 on success, or a negative value if an error occurred. - */ -static inline int -sn_change_coherence(u64 *new_domain, u64 *old_domain) -{ - struct ia64_sal_retval ret_stuff; - ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain, - (u64)old_domain, 0, 0, 0, 0, 0); - return ret_stuff.status; -} - -/* * Change memory access protections for a physical address range. * nasid_array is not used on Altix, but may be in future architectures. * Available memory protection access classes are defined after the function. @@ -744,450 +79,6 @@ sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array) #define SN_MEMPROT_ACCESS_CLASS_6 0x084080 #define SN_MEMPROT_ACCESS_CLASS_7 0x021080 -/* - * Turns off system power. - */ -static inline void -ia64_sn_power_down(void) -{ - struct ia64_sal_retval ret_stuff; - SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0); - while(1) - cpu_relax(); - /* never returns */ -} - -/** - * ia64_sn_fru_capture - tell the system controller to capture hw state - * - * This routine will call the SAL which will tell the system controller(s) - * to capture hw mmr information from each SHub in the system. - */ -static inline u64 -ia64_sn_fru_capture(void) -{ - struct ia64_sal_retval isrv; - SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0); - if (isrv.status) - return 0; - return isrv.v0; -} - -/* - * Performs an operation on a PCI bus or slot -- power up, power down - * or reset. - */ -static inline u64 -ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, - u64 bus, char slot, - u64 action) -{ - struct ia64_sal_retval rv = {0, 0, 0, 0}; - - SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action, - bus, (u64) slot, 0, 0); - if (rv.status) - return rv.v0; - return 0; -} - - -/* - * Open a subchannel for sending arbitrary data to the system - * controller network via the system controller device associated with - * 'nasid'. Return the subchannel number or a negative error code. - */ -static inline int -ia64_sn_irtr_open(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid, - 0, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Close system controller subchannel 'subch' previously opened on 'nasid'. - */ -static inline int -ia64_sn_irtr_close(nasid_t nasid, int subch) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE, - (u64) nasid, (u64) subch, 0, 0, 0, 0); - return (int) rv.status; -} - -/* - * Read data from system controller associated with 'nasid' on - * subchannel 'subch'. The buffer to be filled is pointed to by - * 'buf', and its capacity is in the integer pointed to by 'len'. The - * referent of 'len' is set to the number of bytes read by the SAL - * call. The return value is either SALRET_OK (for bytes read) or - * SALRET_ERROR (for error or "no data available"). - */ -static inline int -ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV, - (u64) nasid, (u64) subch, (u64) buf, (u64) len, - 0, 0); - return (int) rv.status; -} - -/* - * Write data to the system controller network via the system - * controller associated with 'nasid' on suchannel 'subch'. The - * buffer to be written out is pointed to by 'buf', and 'len' is the - * number of bytes to be written. The return value is either the - * number of bytes written (which could be zero) or a negative error - * code. - */ -static inline int -ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND, - (u64) nasid, (u64) subch, (u64) buf, (u64) len, - 0, 0); - return (int) rv.v0; -} - -/* - * Check whether any interrupts are pending for the system controller - * associated with 'nasid' and its subchannel 'subch'. The return - * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or - * SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr(nasid_t nasid, int subch) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS, - (u64) nasid, (u64) subch, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Enable the interrupt indicated by the intr parameter (either - * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON, - (u64) nasid, (u64) subch, intr, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Disable the interrupt indicated by the intr parameter (either - * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV). - */ -static inline int -ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF, - (u64) nasid, (u64) subch, intr, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Set up a node as the point of contact for system controller - * environmental event delivery. - */ -static inline int -ia64_sn_sysctl_event_init(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid, - 0, 0, 0, 0, 0, 0); - return (int) rv.v0; -} - -/* - * Ask the system controller on the specified nasid to reset - * the CX corelet clock. Only valid on TIO nodes. - */ -static inline int -ia64_sn_sysctl_tio_clock_reset(nasid_t nasid) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST, - nasid, 0, 0, 0, 0, 0); - if (rv.status != 0) - return (int)rv.status; - if (rv.v0 != 0) - return (int)rv.v0; - - return 0; -} - -/* - * Get the associated ioboard type for a given nasid. - */ -static inline long -ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard) -{ - struct ia64_sal_retval isrv; - SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD, - nasid, 0, 0, 0, 0, 0); - if (isrv.v0 != 0) { - *ioboard = isrv.v0; - return isrv.status; - } - if (isrv.v1 != 0) { - *ioboard = isrv.v1; - return isrv.status; - } - - return isrv.status; -} - -/** - * ia64_sn_get_fit_compt - read a FIT entry from the PROM header - * @nasid: NASID of node to read - * @index: FIT entry index to be retrieved (0..n) - * @fitentry: 16 byte buffer where FIT entry will be stored. - * @banbuf: optional buffer for retrieving banner - * @banlen: length of banner buffer - * - * Access to the physical PROM chips needs to be serialized since reads and - * writes can't occur at the same time, so we need to call into the SAL when - * we want to look at the FIT entries on the chips. - * - * Returns: - * %SALRET_OK if ok - * %SALRET_INVALID_ARG if index too big - * %SALRET_NOT_IMPLEMENTED if running on older PROM - * ??? if nasid invalid OR banner buffer not large enough - */ -static inline int -ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf, - u64 banlen) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry, - banbuf, banlen, 0, 0); - return (int) rv.status; -} - -/* - * Initialize the SAL components of the system controller - * communication driver; specifically pass in a sizable buffer that - * can be used for allocation of subchannel queues as new subchannels - * are opened. "buf" points to the buffer, and "len" specifies its - * length. - */ -static inline int -ia64_sn_irtr_init(nasid_t nasid, void *buf, int len) -{ - struct ia64_sal_retval rv; - SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT, - (u64) nasid, (u64) buf, (u64) len, 0, 0, 0); - return (int) rv.status; -} - -/* - * Returns the nasid, subnode & slice corresponding to a SAPIC ID - * - * In: - * arg0 - SN_SAL_GET_SAPIC_INFO - * arg1 - sapicid (lid >> 16) - * Out: - * v0 - nasid - * v1 - subnode - * v2 - slice - */ -static inline u64 -ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0); - -/***** BEGIN HACK - temp til old proms no longer supported ********/ - if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { - if (nasid) *nasid = sapicid & 0xfff; - if (subnode) *subnode = (sapicid >> 13) & 1; - if (slice) *slice = (sapicid >> 12) & 3; - return 0; - } -/***** END HACK *******/ - - if (ret_stuff.status < 0) - return ret_stuff.status; - - if (nasid) *nasid = (int) ret_stuff.v0; - if (subnode) *subnode = (int) ret_stuff.v1; - if (slice) *slice = (int) ret_stuff.v2; - return 0; -} - -/* - * Returns information about the HUB/SHUB. - * In: - * arg0 - SN_SAL_GET_SN_INFO - * arg1 - 0 (other values reserved for future use) - * Out: - * v0 - * [7:0] - shub type (0=shub1, 1=shub2) - * [15:8] - Log2 max number of nodes in entire system (includes - * C-bricks, I-bricks, etc) - * [23:16] - Log2 of nodes per sharing domain - * [31:24] - partition ID - * [39:32] - coherency_id - * [47:40] - regionsize - * v1 - * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid) - * [23:15] - bit position of low nasid bit - */ -static inline u64 -ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, - u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg) -{ - struct ia64_sal_retval ret_stuff; - - ret_stuff.status = 0; - ret_stuff.v0 = 0; - ret_stuff.v1 = 0; - ret_stuff.v2 = 0; - SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0); - -/***** BEGIN HACK - temp til old proms no longer supported ********/ - if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) { - int nasid = get_sapicid() & 0xfff; -#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL -#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48 - if (shubtype) *shubtype = 0; - if (nasid_bitmask) *nasid_bitmask = 0x7ff; - if (nasid_shift) *nasid_shift = 38; - if (systemsize) *systemsize = 10; - if (sharing_domain_size) *sharing_domain_size = 8; - if (partid) *partid = ia64_sn_sysctl_partition_get(nasid); - if (coher) *coher = nasid >> 9; - if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >> - SH_SHUB_ID_NODES_PER_BIT_SHFT; - return 0; - } -/***** END HACK *******/ - - if (ret_stuff.status < 0) - return ret_stuff.status; - - if (shubtype) *shubtype = ret_stuff.v0 & 0xff; - if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff; - if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff; - if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff; - if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff; - if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff; - if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff); - if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff; - return 0; -} - -/* - * This is the access point to the Altix PROM hardware performance - * and status monitoring interface. For info on using this, see - * arch/ia64/include/asm/sn/sn2/sn_hwperf.h - */ -static inline int -ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2, - u64 a3, u64 a4, int *v0) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid, - opcode, a0, a1, a2, a3, a4); - if (v0) - *v0 = (int) rv.v0; - return (int) rv.status; -} - -static inline int -ia64_sn_ioif_get_pci_topology(u64 buf, u64 len) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0); - return (int) rv.status; -} - -/* - * BTE error recovery is implemented in SAL - */ -static inline int -ia64_sn_bte_recovery(nasid_t nasid) -{ - struct ia64_sal_retval rv; - - rv.status = 0; - SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0); - if (rv.status == SALRET_NOT_IMPLEMENTED) - return 0; - return (int) rv.status; -} - -static inline int -ia64_sn_is_fake_prom(void) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0); - return (rv.status == 0); -} - -static inline int -ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0); - if (rv.status != 0) - return rv.status; - *feature_set = rv.v0; - return 0; -} - -static inline int -ia64_sn_set_os_feature(int feature) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0); - return rv.status; -} - -static inline int -sn_inject_error(u64 paddr, u64 *data, u64 *ecc) -{ - struct ia64_sal_retval ret_stuff; - - ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data, - (u64)ecc, 0, 0, 0, 0); - return ret_stuff.status; -} - -static inline int -ia64_sn_set_cpu_number(int cpu) -{ - struct ia64_sal_retval rv; - - SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0); - return rv.status; -} -static inline int -ia64_sn_kernel_launch_event(void) -{ - struct ia64_sal_retval rv; - SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0); - return rv.status; -} - union sn_watchlist_u { u64 val; struct { diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h deleted file mode 100644 index 666222d7f0f6..000000000000 --- a/arch/ia64/include/asm/sn/tioca.h +++ /dev/null @@ -1,596 +0,0 @@ -#ifndef _ASM_IA64_SN_TIO_TIOCA_H -#define _ASM_IA64_SN_TIO_TIOCA_H - -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - - -#define TIOCA_PART_NUM 0xE020 -#define TIOCA_MFGR_NUM 0x24 -#define TIOCA_REV_A 0x1 - -/* - * Register layout for TIO:CA. See below for bitmasks for each register. - */ - -struct tioca { - u64 ca_id; /* 0x000000 */ - u64 ca_control1; /* 0x000008 */ - u64 ca_control2; /* 0x000010 */ - u64 ca_status1; /* 0x000018 */ - u64 ca_status2; /* 0x000020 */ - u64 ca_gart_aperature; /* 0x000028 */ - u64 ca_gfx_detach; /* 0x000030 */ - u64 ca_inta_dest_addr; /* 0x000038 */ - u64 ca_intb_dest_addr; /* 0x000040 */ - u64 ca_err_int_dest_addr; /* 0x000048 */ - u64 ca_int_status; /* 0x000050 */ - u64 ca_int_status_alias; /* 0x000058 */ - u64 ca_mult_error; /* 0x000060 */ - u64 ca_mult_error_alias; /* 0x000068 */ - u64 ca_first_error; /* 0x000070 */ - u64 ca_int_mask; /* 0x000078 */ - u64 ca_crm_pkterr_type; /* 0x000080 */ - u64 ca_crm_pkterr_type_alias; /* 0x000088 */ - u64 ca_crm_ct_error_detail_1; /* 0x000090 */ - u64 ca_crm_ct_error_detail_2; /* 0x000098 */ - u64 ca_crm_tnumto; /* 0x0000A0 */ - u64 ca_gart_err; /* 0x0000A8 */ - u64 ca_pcierr_type; /* 0x0000B0 */ - u64 ca_pcierr_addr; /* 0x0000B8 */ - - u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */ - - u64 ca_pci_rd_buf_flush; /* 0x0000D8 */ - u64 ca_pci_dma_addr_extn; /* 0x0000E0 */ - u64 ca_agp_dma_addr_extn; /* 0x0000E8 */ - u64 ca_force_inta; /* 0x0000F0 */ - u64 ca_force_intb; /* 0x0000F8 */ - u64 ca_debug_vector_sel; /* 0x000100 */ - u64 ca_debug_mux_core_sel; /* 0x000108 */ - u64 ca_debug_mux_pci_sel; /* 0x000110 */ - u64 ca_debug_domain_sel; /* 0x000118 */ - - u64 ca_pad_000120[28]; /* 0x0001{20..F8} */ - - u64 ca_gart_ptr_table; /* 0x200 */ - u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */ -}; - -/* - * Mask/shift definitions for TIO:CA registers. The convention here is - * to mainly use the names as they appear in the "TIO AEGIS Programmers' - * Reference" with a CA_ prefix added. Some exceptions were made to fix - * duplicate field names or to generalize fields that are common to - * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for - * example). - * - * Fields consisting of a single bit have a single #define have a single - * macro declaration to mask the bit. Fields consisting of multiple bits - * have two declarations: one to mask the proper bits in a register, and - * a second with the suffix "_SHFT" to identify how far the mask needs to - * be shifted right to get its base value. - */ - -/* ==== ca_control1 */ -#define CA_SYS_BIG_END (1ull << 0) -#define CA_DMA_AGP_SWAP (1ull << 1) -#define CA_DMA_PCI_SWAP (1ull << 2) -#define CA_PIO_IO_SWAP (1ull << 3) -#define CA_PIO_MEM_SWAP (1ull << 4) -#define CA_GFX_WR_SWAP (1ull << 5) -#define CA_AGP_FW_ENABLE (1ull << 6) -#define CA_AGP_CAL_CYCLE (0x7ull << 7) -#define CA_AGP_CAL_CYCLE_SHFT 7 -#define CA_AGP_CAL_PRSCL_BYP (1ull << 10) -#define CA_AGP_INIT_CAL_ENB (1ull << 11) -#define CA_INJ_ADDR_PERR (1ull << 12) -#define CA_INJ_DATA_PERR (1ull << 13) - /* bits 15:14 unused */ -#define CA_PCIM_IO_NBE_AD (0x7ull << 16) -#define CA_PCIM_IO_NBE_AD_SHFT 16 -#define CA_PCIM_FAST_BTB_ENB (1ull << 19) - /* bits 23:20 unused */ -#define CA_PIO_ADDR_OFFSET (0xffull << 24) -#define CA_PIO_ADDR_OFFSET_SHFT 24 - /* bits 35:32 unused */ -#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36) -#define CA_AGPDMA_OP_COMBDELAY_SHFT 36 - /* bit 41 unused */ -#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42) -#define CA_PCI_INT_LPCNT (0xffull << 44) -#define CA_PCI_INT_LPCNT_SHFT 44 - /* bits 63:52 unused */ - -/* ==== ca_control2 */ -#define CA_AGP_LATENCY_TO (0xffull << 0) -#define CA_AGP_LATENCY_TO_SHFT 0 -#define CA_PCI_LATENCY_TO (0xffull << 8) -#define CA_PCI_LATENCY_TO_SHFT 8 -#define CA_PCI_MAX_RETRY (0x3ffull << 16) -#define CA_PCI_MAX_RETRY_SHFT 16 - /* bits 27:26 unused */ -#define CA_RT_INT_EN (0x3ull << 28) -#define CA_RT_INT_EN_SHFT 28 -#define CA_MSI_INT_ENB (1ull << 30) -#define CA_PCI_ARB_ERR_ENB (1ull << 31) -#define CA_GART_MEM_PARAM (0x3ull << 32) -#define CA_GART_MEM_PARAM_SHFT 32 -#define CA_GART_RD_PREFETCH_ENB (1ull << 34) -#define CA_GART_WR_PREFETCH_ENB (1ull << 35) -#define CA_GART_FLUSH_TLB (1ull << 36) - /* bits 39:37 unused */ -#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40) -#define CA_CRM_TNUMTO_PERIOD_SHFT 40 - /* bits 55:53 unused */ -#define CA_CRM_TNUMTO_ENB (1ull << 56) -#define CA_CRM_PRESCALER_BYP (1ull << 57) - /* bits 59:58 unused */ -#define CA_CRM_MAX_CREDIT (0x7ull << 60) -#define CA_CRM_MAX_CREDIT_SHFT 60 - /* bit 63 unused */ - -/* ==== ca_status1 */ -#define CA_CORELET_ID (0x3ull << 0) -#define CA_CORELET_ID_SHFT 0 -#define CA_INTA_N (1ull << 2) -#define CA_INTB_N (1ull << 3) -#define CA_CRM_CREDIT_AVAIL (0x7ull << 4) -#define CA_CRM_CREDIT_AVAIL_SHFT 4 - /* bit 7 unused */ -#define CA_CRM_SPACE_AVAIL (0x7full << 8) -#define CA_CRM_SPACE_AVAIL_SHFT 8 - /* bit 15 unused */ -#define CA_GART_TLB_VAL (0xffull << 16) -#define CA_GART_TLB_VAL_SHFT 16 - /* bits 63:24 unused */ - -/* ==== ca_status2 */ -#define CA_GFX_CREDIT_AVAIL (0xffull << 0) -#define CA_GFX_CREDIT_AVAIL_SHFT 0 -#define CA_GFX_OPQ_AVAIL (0xffull << 8) -#define CA_GFX_OPQ_AVAIL_SHFT 8 -#define CA_GFX_WRBUFF_AVAIL (0xffull << 16) -#define CA_GFX_WRBUFF_AVAIL_SHFT 16 -#define CA_ADMA_OPQ_AVAIL (0xffull << 24) -#define CA_ADMA_OPQ_AVAIL_SHFT 24 -#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32) -#define CA_ADMA_WRBUFF_AVAIL_SHFT 32 -#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40) -#define CA_ADMA_RDBUFF_AVAIL_SHFT 40 -#define CA_PCI_PIO_OP_STAT (1ull << 47) -#define CA_PDMA_OPQ_AVAIL (0xfull << 48) -#define CA_PDMA_OPQ_AVAIL_SHFT 48 -#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52) -#define CA_PDMA_WRBUFF_AVAIL_SHFT 52 -#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56) -#define CA_PDMA_RDBUFF_AVAIL_SHFT 56 - /* bits 63:58 unused */ - -/* ==== ca_gart_aperature */ -#define CA_GART_AP_ENB_AGP (1ull << 0) -#define CA_GART_PAGE_SIZE (1ull << 1) -#define CA_GART_AP_ENB_PCI (1ull << 2) - /* bits 11:3 unused */ -#define CA_GART_AP_SIZE (0x3ffull << 12) -#define CA_GART_AP_SIZE_SHFT 12 -#define CA_GART_AP_BASE (0x3ffffffffffull << 22) -#define CA_GART_AP_BASE_SHFT 22 - -/* ==== ca_inta_dest_addr - ==== ca_intb_dest_addr - ==== ca_err_int_dest_addr */ - /* bits 2:0 unused */ -#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3) -#define CA_INT_DEST_ADDR_SHFT 3 - /* bits 55:54 unused */ -#define CA_INT_DEST_VECT (0xffull << 56) -#define CA_INT_DEST_VECT_SHFT 56 - -/* ==== ca_int_status */ -/* ==== ca_int_status_alias */ -/* ==== ca_mult_error */ -/* ==== ca_mult_error_alias */ -/* ==== ca_first_error */ -/* ==== ca_int_mask */ -#define CA_PCI_ERR (1ull << 0) - /* bits 3:1 unused */ -#define CA_GART_FETCH_ERR (1ull << 4) -#define CA_GFX_WR_OVFLW (1ull << 5) -#define CA_PIO_REQ_OVFLW (1ull << 6) -#define CA_CRM_PKTERR (1ull << 7) -#define CA_CRM_DVERR (1ull << 8) -#define CA_TNUMTO (1ull << 9) -#define CA_CXM_RSP_CRED_OVFLW (1ull << 10) -#define CA_CXM_REQ_CRED_OVFLW (1ull << 11) -#define CA_PIO_INVALID_ADDR (1ull << 12) -#define CA_PCI_ARB_TO (1ull << 13) -#define CA_AGP_REQ_OFLOW (1ull << 14) -#define CA_SBA_TYPE1_ERR (1ull << 15) - /* bit 16 unused */ -#define CA_INTA (1ull << 17) -#define CA_INTB (1ull << 18) -#define CA_MULT_INTA (1ull << 19) -#define CA_MULT_INTB (1ull << 20) -#define CA_GFX_CREDIT_OVFLW (1ull << 21) - /* bits 63:22 unused */ - -/* ==== ca_crm_pkterr_type */ -/* ==== ca_crm_pkterr_type_alias */ -#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0) -#define CA_CRM_PKTERR_DIDN (1ull << 1) -#define CA_CRM_PKTERR_PACTYPE (1ull << 2) -#define CA_CRM_PKTERR_INV_TNUM (1ull << 3) -#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4) -#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5) -#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6) -#define CA_CRM_PKTERR_CW_ERR (1ull << 7) -#define CA_CRM_PKTERR_SBERR_NH (1ull << 8) -#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9) -#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10) -#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11) -#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12) - /* bits 15:13 unused */ -#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16) -#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17) -#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18) -#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19) -#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20) -#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21) -#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22) -#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23) -#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24) -#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25) -#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26) -#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27) -#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28) - /* bits 63:29 unused */ - -/* ==== ca_crm_ct_error_detail_1 */ -#define CA_PKT_TYPE (0xfull << 0) -#define CA_PKT_TYPE_SHFT 0 -#define CA_SRC_ID (0x3ull << 4) -#define CA_SRC_ID_SHFT 4 -#define CA_DATA_SZ (0x3ull << 6) -#define CA_DATA_SZ_SHFT 6 -#define CA_TNUM (0xffull << 8) -#define CA_TNUM_SHFT 8 -#define CA_DW_DATA_EN (0xffull << 16) -#define CA_DW_DATA_EN_SHFT 16 -#define CA_GFX_CRED (0xffull << 24) -#define CA_GFX_CRED_SHFT 24 -#define CA_MEM_RD_PARAM (0x3ull << 32) -#define CA_MEM_RD_PARAM_SHFT 32 -#define CA_PIO_OP (1ull << 34) -#define CA_CW_ERR (1ull << 35) - /* bits 62:36 unused */ -#define CA_VALID (1ull << 63) - -/* ==== ca_crm_ct_error_detail_2 */ - /* bits 2:0 unused */ -#define CA_PKT_ADDR (0x1fffffffffffffull << 3) -#define CA_PKT_ADDR_SHFT 3 - /* bits 63:56 unused */ - -/* ==== ca_crm_tnumto */ -#define CA_CRM_TNUMTO_VAL (0xffull << 0) -#define CA_CRM_TNUMTO_VAL_SHFT 0 -#define CA_CRM_TNUMTO_WR (1ull << 8) - /* bits 63:9 unused */ - -/* ==== ca_gart_err */ -#define CA_GART_ERR_SOURCE (0x3ull << 0) -#define CA_GART_ERR_SOURCE_SHFT 0 - /* bits 3:2 unused */ -#define CA_GART_ERR_ADDR (0xfffffffffull << 4) -#define CA_GART_ERR_ADDR_SHFT 4 - /* bits 63:40 unused */ - -/* ==== ca_pcierr_type */ -#define CA_PCIERR_DATA (0xffffffffull << 0) -#define CA_PCIERR_DATA_SHFT 0 -#define CA_PCIERR_ENB (0xfull << 32) -#define CA_PCIERR_ENB_SHFT 32 -#define CA_PCIERR_CMD (0xfull << 36) -#define CA_PCIERR_CMD_SHFT 36 -#define CA_PCIERR_A64 (1ull << 40) -#define CA_PCIERR_SLV_SERR (1ull << 41) -#define CA_PCIERR_SLV_WR_PERR (1ull << 42) -#define CA_PCIERR_SLV_RD_PERR (1ull << 43) -#define CA_PCIERR_MST_SERR (1ull << 44) -#define CA_PCIERR_MST_WR_PERR (1ull << 45) -#define CA_PCIERR_MST_RD_PERR (1ull << 46) -#define CA_PCIERR_MST_MABT (1ull << 47) -#define CA_PCIERR_MST_TABT (1ull << 48) -#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49) - -#define CA_PCIERR_TYPES \ - (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \ - CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \ - CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \ - CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT) - - /* bits 63:50 unused */ - -/* ==== ca_pci_dma_addr_extn */ -#define CA_UPPER_NODE_OFFSET (0x3full << 0) -#define CA_UPPER_NODE_OFFSET_SHFT 0 - /* bits 7:6 unused */ -#define CA_CHIPLET_ID (0x3ull << 8) -#define CA_CHIPLET_ID_SHFT 8 - /* bits 11:10 unused */ -#define CA_PCI_DMA_NODE_ID (0xffffull << 12) -#define CA_PCI_DMA_NODE_ID_SHFT 12 - /* bits 27:26 unused */ -#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28) - /* bits 63:29 unused */ - - -/* ==== ca_agp_dma_addr_extn */ - /* bits 19:0 unused */ -#define CA_AGP_DMA_NODE_ID (0xffffull << 20) -#define CA_AGP_DMA_NODE_ID_SHFT 20 - /* bits 27:26 unused */ -#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28) - /* bits 63:29 unused */ - -/* ==== ca_debug_vector_sel */ -#define CA_DEBUG_MN_VSEL (0xfull << 0) -#define CA_DEBUG_MN_VSEL_SHFT 0 -#define CA_DEBUG_PP_VSEL (0xfull << 4) -#define CA_DEBUG_PP_VSEL_SHFT 4 -#define CA_DEBUG_GW_VSEL (0xfull << 8) -#define CA_DEBUG_GW_VSEL_SHFT 8 -#define CA_DEBUG_GT_VSEL (0xfull << 12) -#define CA_DEBUG_GT_VSEL_SHFT 12 -#define CA_DEBUG_PD_VSEL (0xfull << 16) -#define CA_DEBUG_PD_VSEL_SHFT 16 -#define CA_DEBUG_AD_VSEL (0xfull << 20) -#define CA_DEBUG_AD_VSEL_SHFT 20 -#define CA_DEBUG_CX_VSEL (0xfull << 24) -#define CA_DEBUG_CX_VSEL_SHFT 24 -#define CA_DEBUG_CR_VSEL (0xfull << 28) -#define CA_DEBUG_CR_VSEL_SHFT 28 -#define CA_DEBUG_BA_VSEL (0xfull << 32) -#define CA_DEBUG_BA_VSEL_SHFT 32 -#define CA_DEBUG_PE_VSEL (0xfull << 36) -#define CA_DEBUG_PE_VSEL_SHFT 36 -#define CA_DEBUG_BO_VSEL (0xfull << 40) -#define CA_DEBUG_BO_VSEL_SHFT 40 -#define CA_DEBUG_BI_VSEL (0xfull << 44) -#define CA_DEBUG_BI_VSEL_SHFT 44 -#define CA_DEBUG_AS_VSEL (0xfull << 48) -#define CA_DEBUG_AS_VSEL_SHFT 48 -#define CA_DEBUG_PS_VSEL (0xfull << 52) -#define CA_DEBUG_PS_VSEL_SHFT 52 -#define CA_DEBUG_PM_VSEL (0xfull << 56) -#define CA_DEBUG_PM_VSEL_SHFT 56 - /* bits 63:60 unused */ - -/* ==== ca_debug_mux_core_sel */ -/* ==== ca_debug_mux_pci_sel */ -#define CA_DEBUG_MSEL0 (0x7ull << 0) -#define CA_DEBUG_MSEL0_SHFT 0 - /* bit 3 unused */ -#define CA_DEBUG_NSEL0 (0x7ull << 4) -#define CA_DEBUG_NSEL0_SHFT 4 - /* bit 7 unused */ -#define CA_DEBUG_MSEL1 (0x7ull << 8) -#define CA_DEBUG_MSEL1_SHFT 8 - /* bit 11 unused */ -#define CA_DEBUG_NSEL1 (0x7ull << 12) -#define CA_DEBUG_NSEL1_SHFT 12 - /* bit 15 unused */ -#define CA_DEBUG_MSEL2 (0x7ull << 16) -#define CA_DEBUG_MSEL2_SHFT 16 - /* bit 19 unused */ -#define CA_DEBUG_NSEL2 (0x7ull << 20) -#define CA_DEBUG_NSEL2_SHFT 20 - /* bit 23 unused */ -#define CA_DEBUG_MSEL3 (0x7ull << 24) -#define CA_DEBUG_MSEL3_SHFT 24 - /* bit 27 unused */ -#define CA_DEBUG_NSEL3 (0x7ull << 28) -#define CA_DEBUG_NSEL3_SHFT 28 - /* bit 31 unused */ -#define CA_DEBUG_MSEL4 (0x7ull << 32) -#define CA_DEBUG_MSEL4_SHFT 32 - /* bit 35 unused */ -#define CA_DEBUG_NSEL4 (0x7ull << 36) -#define CA_DEBUG_NSEL4_SHFT 36 - /* bit 39 unused */ -#define CA_DEBUG_MSEL5 (0x7ull << 40) -#define CA_DEBUG_MSEL5_SHFT 40 - /* bit 43 unused */ -#define CA_DEBUG_NSEL5 (0x7ull << 44) -#define CA_DEBUG_NSEL5_SHFT 44 - /* bit 47 unused */ -#define CA_DEBUG_MSEL6 (0x7ull << 48) -#define CA_DEBUG_MSEL6_SHFT 48 - /* bit 51 unused */ -#define CA_DEBUG_NSEL6 (0x7ull << 52) -#define CA_DEBUG_NSEL6_SHFT 52 - /* bit 55 unused */ -#define CA_DEBUG_MSEL7 (0x7ull << 56) -#define CA_DEBUG_MSEL7_SHFT 56 - /* bit 59 unused */ -#define CA_DEBUG_NSEL7 (0x7ull << 60) -#define CA_DEBUG_NSEL7_SHFT 60 - /* bit 63 unused */ - - -/* ==== ca_debug_domain_sel */ -#define CA_DEBUG_DOMAIN_L (1ull << 0) -#define CA_DEBUG_DOMAIN_H (1ull << 1) - /* bits 63:2 unused */ - -/* ==== ca_gart_ptr_table */ -#define CA_GART_PTR_VAL (1ull << 0) - /* bits 11:1 unused */ -#define CA_GART_PTR_ADDR (0xfffffffffffull << 12) -#define CA_GART_PTR_ADDR_SHFT 12 - /* bits 63:56 unused */ - -/* ==== ca_gart_tlb_addr[0-7] */ -#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0) -#define CA_GART_TLB_ADDR_SHFT 0 - /* bits 62:56 unused */ -#define CA_GART_TLB_ENTRY_VAL (1ull << 63) - -/* - * PIO address space ranges for TIO:CA - */ - -/* CA internal registers */ -#define CA_PIO_ADMIN 0x00000000 -#define CA_PIO_ADMIN_LEN 0x00010000 - -/* GFX Write Buffer - Diagnostics */ -#define CA_PIO_GFX 0x00010000 -#define CA_PIO_GFX_LEN 0x00010000 - -/* AGP DMA Write Buffer - Diagnostics */ -#define CA_PIO_AGP_DMAWRITE 0x00020000 -#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000 - -/* AGP DMA READ Buffer - Diagnostics */ -#define CA_PIO_AGP_DMAREAD 0x00030000 -#define CA_PIO_AGP_DMAREAD_LEN 0x00010000 - -/* PCI Config Type 0 */ -#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000 -#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000 - -/* PCI Config Type 1 */ -#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000 -#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000 - -/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */ -#define CA_PIO_PCI_IO 0x03000000 -#define CA_PIO_PCI_IO_LEN 0x05000000 - -/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */ -/* use Fast Write if enabled and coretalk packet type is a GFX request */ -#define CA_PIO_PCI_MEM_OFFSET 0x08000000 -#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000 - -/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */ -/* use Fast Write if enabled and coretalk packet type is a GFX request */ -#define CA_PIO_PCI_MEM 0x40000000 -#define CA_PIO_PCI_MEM_LEN 0xc0000000 - -/* - * DMA space - * - * The CA aperature (ie. bus address range) mapped by the GART is segmented into - * two parts. The lower portion of the aperature is used for mapping 32 bit - * PCI addresses which are managed by the dma interfaces in this file. The - * upper poprtion of the aperature is used for mapping 48 bit AGP addresses. - * The AGP portion of the aperature is managed by the agpgart_be.c driver - * in drivers/linux/agp. There are ca-specific hooks in that driver to - * manipulate the gart, but management of the AGP portion of the aperature - * is the responsibility of that driver. - * - * CA allows three main types of DMA mapping: - * - * PCI 64-bit Managed by this driver - * PCI 32-bit Managed by this driver - * AGP 48-bit Managed by hooks in the /dev/agpgart driver - * - * All of the above can optionally be remapped through the GART. The following - * table lists the combinations of addressing types and GART remapping that - * is currently supported by the driver (h/w supports all, s/w limits this): - * - * PCI64 PCI32 AGP48 - * GART no yes yes - * Direct yes yes no - * - * GART remapping of PCI64 is not done because there is no need to. The - * 64 bit PCI address holds all of the information necessary to target any - * memory in the system. - * - * AGP48 is always mapped through the GART. Management of the AGP48 portion - * of the aperature is the responsibility of code in the agpgart_be driver. - * - * The non-64 bit bus address space will currently be partitioned like this: - * - * 0xffff_ffff_ffff +-------- - * | AGP48 direct - * | Space managed by this driver - * CA_AGP_DIRECT_BASE +-------- - * | AGP GART mapped (gfx aperature) - * | Space managed by /dev/agpgart driver - * | This range is exposed to the agpgart - * | driver as the "graphics aperature" - * CA_AGP_MAPPED_BASE +----- - * | PCI GART mapped - * | Space managed by this driver - * CA_PCI32_MAPPED_BASE +---- - * | PCI32 direct - * | Space managed by this driver - * 0xC000_0000 +-------- - * (CA_PCI32_DIRECT_BASE) - * - * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE - * is what we call the CA aperature. Addresses falling in this range will - * be remapped using the GART. - * - * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE - * is what we call the graphics aperature. This is a subset of the CA - * aperature and is under the control of the agpgart_be driver. - * - * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are - * somewhat arbitrary values. The known constraints on choosing these is: - * - * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size) - * must be one of the values supported by the ca_gart_aperature register. - * Currently valid values are: 4MB through 4096MB in powers of 2 increments - * - * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size) - * must be in MB units since that's what the agpgart driver assumes. - */ - -/* - * Define Bus DMA ranges. These are configurable (see constraints above) - * and will probably need tuning based on experience. - */ - - -/* - * 11/24/03 - * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it - * generally unusable. The problem is that for PCI direct 32 - * DMA's, all 32 bits of the bus address are used to form the lower 32 bits - * of the coretalk address, and coretalk bits 38:32 come from a register. - * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available - * for DMA (the rest is allocated to PIO), host node addresses need to be - * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range - * as well. So there can be no PCI32 direct DMA below 3GB!! For this - * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes - * tioca_dma_direct32() a noop but preserves the code flow should this issue - * be fixed in a respin. - * - * For now, all PCI32 DMA's must be mapped through the GART. - */ - -#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */ -#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */ - -#define CA_PCI32_MAPPED_BASE 0xC0000000UL -#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */ - -#define CA_AGP_MAPPED_BASE 0x80000000UL -#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */ - -#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */ -#define CA_AGP_DIRECT_SIZE 0x40000000UL - -#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE) -#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE) - -#endif /* _ASM_IA64_SN_TIO_TIOCA_H */ diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h deleted file mode 100644 index 9a820ac61be3..000000000000 --- a/arch/ia64/include/asm/sn/tioca_provider.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H -#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H - -#include <asm/sn/tioca.h> - -/* - * WAR enables - * Defines for individual WARs. Each is a bitmask of applicable - * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B, - * (3 << 1) == (rev A or rev B), etc - */ - -#define TIOCA_WAR_ENABLED(pv, tioca_common) \ - ((1 << tioca_common->ca_rev) & pv) - - /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */ -#define PV907908 (1 << 1) - /* ATI config space problems after BIOS execution starts */ -#define PV908234 (1 << 1) - /* CA:AGPDMA write request data mismatch with ABC1CL merge */ -#define PV895469 (1 << 1) - /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/ -#define PV910244 (1 << 1) - -struct tioca_dmamap{ - struct list_head cad_list; /* headed by ca_list */ - - dma_addr_t cad_dma_addr; /* Linux dma handle */ - uint cad_gart_entry; /* start entry in ca_gart_pagemap */ - uint cad_gart_size; /* #entries for this map */ -}; - -/* - * Kernel only fields. Prom may look at this stuff for debugging only. - * Access this structure through the ca_kernel_private ptr. - */ - -struct tioca_common ; - -struct tioca_kernel { - struct tioca_common *ca_common; /* tioca this belongs to */ - struct list_head ca_list; /* list of all ca's */ - struct list_head ca_dmamaps; - spinlock_t ca_lock; /* Kernel lock */ - cnodeid_t ca_closest_node; - struct list_head *ca_devices; /* bus->devices */ - - /* - * General GART stuff - */ - u64 ca_ap_size; /* size of aperature in bytes */ - u32 ca_gart_entries; /* # u64 entries in gart */ - u32 ca_ap_pagesize; /* aperature page size in bytes */ - u64 ca_ap_bus_base; /* bus address of CA aperature */ - u64 ca_gart_size; /* gart size in bytes */ - u64 *ca_gart; /* gart table vaddr */ - u64 ca_gart_coretalk_addr; /* gart coretalk addr */ - u8 ca_gart_iscoherent; /* used in tioca_tlbflush */ - - /* PCI GART convenience values */ - u64 ca_pciap_base; /* pci aperature bus base address */ - u64 ca_pciap_size; /* pci aperature size (bytes) */ - u64 ca_pcigart_base; /* gfx GART bus base address */ - u64 *ca_pcigart; /* gfx GART vm address */ - u32 ca_pcigart_entries; - u32 ca_pcigart_start; /* PCI start index in ca_gart */ - void *ca_pcigart_pagemap; - - /* AGP GART convenience values */ - u64 ca_gfxap_base; /* gfx aperature bus base address */ - u64 ca_gfxap_size; /* gfx aperature size (bytes) */ - u64 ca_gfxgart_base; /* gfx GART bus base address */ - u64 *ca_gfxgart; /* gfx GART vm address */ - u32 ca_gfxgart_entries; - u32 ca_gfxgart_start; /* agpgart start index in ca_gart */ -}; - -/* - * Common tioca info shared between kernel and prom - * - * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES - * TO THE PROM VERSION. - */ - -struct tioca_common { - struct pcibus_bussoft ca_common; /* common pciio header */ - - u32 ca_rev; - u32 ca_closest_nasid; - - u64 ca_prom_private; - u64 ca_kernel_private; -}; - -/** - * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry - * @paddr: page address to convert - * - * Convert a system [coretalk] address to a GART entry. GART entries are - * formed using the following: - * - * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | - * (REMAP_SYS_ADDR) ) >> 12 ) - * - * DATA written to 1 GART TABLE Entry in system memory is remapped system - * addr for 1 page - * - * The data is for coretalk address format right shifted 12 bits with a - * valid bit. - * - * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12]. - * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id. - * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID. - * GART_TABLE_ENTRY [ 63 ] -- Valid Bit - */ -static inline u64 -tioca_paddr_to_gart(unsigned long paddr) -{ - /* - * We are assuming right now that paddr already has the correct - * format since the address from xtalk_dmaXXX should already have - * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations. - */ - - return ((paddr) >> 12) | (1UL << 63); -} - -/** - * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA - * @page_addr: system page address to map - */ - -static inline unsigned long -tioca_physpage_to_gart(u64 page_addr) -{ - u64 coretalk_addr; - - coretalk_addr = PHYS_TO_TIODMA(page_addr); - if (!coretalk_addr) { - return 0; - } - - return tioca_paddr_to_gart(coretalk_addr); -} - -/** - * tioca_tlbflush - invalidate cached SGI CA GART TLB entries - * @tioca_kernel: CA context - * - * Invalidate tlb entries for a given CA GART. Main complexity is to account - * for revA bug. - */ -static inline void -tioca_tlbflush(struct tioca_kernel *tioca_kernel) -{ - volatile u64 tmp; - volatile struct tioca __iomem *ca_base; - struct tioca_common *tioca_common; - - tioca_common = tioca_kernel->ca_common; - ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base; - - /* - * Explicit flushes not needed if GART is in cached mode - */ - if (tioca_kernel->ca_gart_iscoherent) { - if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) { - /* - * PV910244: RevA CA needs explicit flushes. - * Need to put GART into uncached mode before - * flushing otherwise the explicit flush is ignored. - * - * Alternate WAR would be to leave GART cached and - * touch every CL aligned GART entry. - */ - - __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM); - __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); - __sn_setq_relaxed(&ca_base->ca_control2, - (0x2ull << CA_GART_MEM_PARAM_SHFT)); - tmp = __sn_readq_relaxed(&ca_base->ca_control2); - } - - return; - } - - /* - * Gart in uncached mode ... need an explicit flush. - */ - - __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB); - tmp = __sn_readq_relaxed(&ca_base->ca_control2); -} - -extern u32 tioca_gart_found; -extern struct list_head tioca_list; -extern int tioca_init_provider(void); -extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern); -#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h deleted file mode 100644 index 6eae8ada90f0..000000000000 --- a/arch/ia64/include/asm/sn/tioce.h +++ /dev/null @@ -1,760 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef __ASM_IA64_SN_TIOCE_H__ -#define __ASM_IA64_SN_TIOCE_H__ - -/* CE ASIC part & mfgr information */ -#define TIOCE_PART_NUM 0xCE00 -#define TIOCE_SRC_ID 0x01 -#define TIOCE_REV_A 0x1 - -/* CE Virtual PPB Vendor/Device IDs */ -#define CE_VIRT_PPB_VENDOR_ID 0x10a9 -#define CE_VIRT_PPB_DEVICE_ID 0x4002 - -/* CE Host Bridge Vendor/Device IDs */ -#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9 -#define CE_HOST_BRIDGE_DEVICE_ID 0x4001 - - -#define TIOCE_NUM_M40_ATES 4096 -#define TIOCE_NUM_M3240_ATES 2048 -#define TIOCE_NUM_PORTS 2 - -/* - * Register layout for TIOCE. MMR offsets are shown at the far right of the - * structure definition. - */ -typedef volatile struct tioce { - /* - * ADMIN : Administration Registers - */ - u64 ce_adm_id; /* 0x000000 */ - u64 ce_pad_000008; /* 0x000008 */ - u64 ce_adm_dyn_credit_status; /* 0x000010 */ - u64 ce_adm_last_credit_status; /* 0x000018 */ - u64 ce_adm_credit_limit; /* 0x000020 */ - u64 ce_adm_force_credit; /* 0x000028 */ - u64 ce_adm_control; /* 0x000030 */ - u64 ce_adm_mmr_chn_timeout; /* 0x000038 */ - u64 ce_adm_ssp_ure_timeout; /* 0x000040 */ - u64 ce_adm_ssp_dre_timeout; /* 0x000048 */ - u64 ce_adm_ssp_debug_sel; /* 0x000050 */ - u64 ce_adm_int_status; /* 0x000058 */ - u64 ce_adm_int_status_alias; /* 0x000060 */ - u64 ce_adm_int_mask; /* 0x000068 */ - u64 ce_adm_int_pending; /* 0x000070 */ - u64 ce_adm_force_int; /* 0x000078 */ - u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */ - u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */ - u64 ce_adm_error_summary; /* 0x000100 */ - u64 ce_adm_error_summary_alias; /* 0x000108 */ - u64 ce_adm_error_mask; /* 0x000110 */ - u64 ce_adm_first_error; /* 0x000118 */ - u64 ce_adm_error_overflow; /* 0x000120 */ - u64 ce_adm_error_overflow_alias; /* 0x000128 */ - u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */ - u64 ce_adm_tnum_error; /* 0x000140 */ - u64 ce_adm_mmr_err_detail; /* 0x000148 */ - u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */ - u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */ - u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */ - u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */ - u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */ - u64 ce_adm_pcie_debug_sel; /* 0x000178 */ - u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */ - - u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */ - u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */ - u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */ - u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */ - u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */ - u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */ - u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */ - u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */ - u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */ - u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */ - u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */ - u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */ - u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */ - u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */ - u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */ - u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */ - u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */ - - u64 ce_adm_bap_ctrl; /* 0x000400 */ - u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */ - - u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */ - u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */ - - u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */ - u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */ - - u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */ - u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */ - - u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */ - - /* - * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2) - * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000 - * NOTE: the comment offsets at far right: let 'z' = {2 or 3} - */ - #define ce_lsi(link_num) ce_lsi[link_num-1] - struct ce_lsi_reg { - u64 ce_lsi_lpu_id; /* 0x00z000 */ - u64 ce_lsi_rst; /* 0x00z008 */ - u64 ce_lsi_dbg_stat; /* 0x00z010 */ - u64 ce_lsi_dbg_cfg; /* 0x00z018 */ - u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */ - u64 ce_lsi_lk_stat; /* 0x00z028 */ - u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */ - u64 ce_lsi_int_and_stat; /* 0x00z040 */ - u64 ce_lsi_int_mask; /* 0x00z048 */ - u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */ - u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */ - u64 ce_pad_00z108; /* 0x00z108 */ - u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */ - u64 ce_pad_00z118; /* 0x00z118 */ - u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */ - u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */ - u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */ - u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */ - u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */ - u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */ - u64 ce_lsi_lk_lyr_status; /* 0x00z208 */ - u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */ - u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */ - u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */ - u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */ - u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */ - u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */ - u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */ - u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */ - u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */ - u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */ - u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */ - u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */ - u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */ - u64 ce_lsi_rply_tmr; /* 0x00z418 */ - u64 ce_lsi_rply_num_stat; /* 0x00z420 */ - u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */ - u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */ - u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */ - u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */ - u64 ce_lsi_seq_cnt; /* 0x00z448 */ - u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */ - u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */ - u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */ - u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */ - u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */ - u64 ce_pad_00z478; /* 0x00z478 */ - u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */ - u64 ce_lsi_mem_d_ld0; /* 0x00z488 */ - u64 ce_lsi_mem_d_ld1; /* 0x00z490 */ - u64 ce_lsi_mem_d_ld2; /* 0x00z498 */ - u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */ - u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */ - u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */ - u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */ - u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */ - u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */ - u64 ce_pad_00z4D8; /* 0x00z4D8 */ - u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */ - u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */ - u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */ - u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */ - u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */ - u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */ - u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */ - u64 ce_pad_00z608; /* 0x00z608 */ - u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */ - u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */ - u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */ - u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */ - u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */ - u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */ - u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */ - u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */ - u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */ - u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */ - u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */ - u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */ - u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */ - u64 ce_lsi_tx_phy_stat; /* 0x00z708 */ - u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */ - u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */ - u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */ - u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */ - u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */ - u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */ - u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */ - u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */ - u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */ - u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */ - u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */ - u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */ - u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */ - u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */ - u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */ - u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */ - u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */ - u64 ce_lsi_gb_cfg1; /* 0x00z800 */ - u64 ce_lsi_gb_cfg2; /* 0x00z808 */ - u64 ce_lsi_gb_cfg3; /* 0x00z810 */ - u64 ce_lsi_gb_cfg4; /* 0x00z818 */ - u64 ce_lsi_gb_stat; /* 0x00z820 */ - u64 ce_lsi_gb_int_stat; /* 0x00z828 */ - u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */ - u64 ce_lsi_gb_int_mask; /* 0x00z838 */ - u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */ - u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */ - u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */ - } ce_lsi[2]; - - u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */ - - /* - * CRM: Coretalk Receive Module Registers - */ - u64 ce_crm_debug_mux; /* 0x004050 */ - u64 ce_pad_004058; /* 0x004058 */ - u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */ - u64 ce_crm_ssp_err_addr; /* 0x004068 */ - u64 ce_crm_ssp_err_syn; /* 0x004070 */ - - u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */ - - /* - * CXM: Coretalk Xmit Module Registers - */ - u64 ce_cxm_dyn_credit_status; /* 0x005010 */ - u64 ce_cxm_last_credit_status; /* 0x005018 */ - u64 ce_cxm_credit_limit; /* 0x005020 */ - u64 ce_cxm_force_credit; /* 0x005028 */ - u64 ce_cxm_disable_bypass; /* 0x005030 */ - u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */ - u64 ce_cxm_debug_mux; /* 0x005050 */ - - u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */ - - /* - * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2) - * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000 - * DTL: the comment offsets at far right: let 'y' = {6 or 8} - * - * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2) - * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000 - * UTL: the comment offsets at far right: let 'z' = {7 or 9} - */ - #define ce_dtl(link_num) ce_dtl_utl[link_num-1] - #define ce_utl(link_num) ce_dtl_utl[link_num-1] - struct ce_dtl_utl_reg { - /* DTL */ - u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */ - u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */ - u64 ce_dtl_dyn_credit_status; /* 0x00y010 */ - u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */ - u64 ce_dtl_dtl_ctrl; /* 0x00y020 */ - u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */ - u64 ce_dtl_debug_sel; /* 0x00y050 */ - u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */ - - /* UTL */ - u64 ce_utl_utl_ctrl; /* 0x00z000 */ - u64 ce_utl_debug_sel; /* 0x00z008 */ - u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */ - } ce_dtl_utl[2]; - - u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */ - - /* - * URE: Upstream Request Engine - */ - u64 ce_ure_dyn_credit_status; /* 0x00B010 */ - u64 ce_ure_last_credit_status; /* 0x00B018 */ - u64 ce_ure_credit_limit; /* 0x00B020 */ - u64 ce_pad_00B028; /* 0x00B028 */ - u64 ce_ure_control; /* 0x00B030 */ - u64 ce_ure_status; /* 0x00B038 */ - u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */ - u64 ce_ure_debug_sel; /* 0x00B050 */ - u64 ce_ure_pcie_debug_sel; /* 0x00B058 */ - u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */ - u64 ce_ure_ssp_err_addr; /* 0x00B068 */ - u64 ce_ure_page_map; /* 0x00B070 */ - u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */ - u64 ce_ure_pipe_sel1; /* 0x00B088 */ - u64 ce_ure_pipe_mask1; /* 0x00B090 */ - u64 ce_ure_pipe_sel2; /* 0x00B098 */ - u64 ce_ure_pipe_mask2; /* 0x00B0A0 */ - u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */ - u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */ - u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */ - u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */ - u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */ - u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */ - u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */ - u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */ - u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */ - u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */ - u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */ - u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */ - u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */ - u64 ce_ure_wr_tnum_val; /* 0x00B110 */ - u64 ce_ure_sram_err_addr0; /* 0x00B118 */ - u64 ce_ure_sram_err_addr1; /* 0x00B120 */ - u64 ce_ure_sram_err_addr2; /* 0x00B128 */ - u64 ce_ure_sram_rd_addr0; /* 0x00B130 */ - u64 ce_ure_sram_rd_addr1; /* 0x00B138 */ - u64 ce_ure_sram_rd_addr2; /* 0x00B140 */ - u64 ce_ure_sram_wr_addr0; /* 0x00B148 */ - u64 ce_ure_sram_wr_addr1; /* 0x00B150 */ - u64 ce_ure_sram_wr_addr2; /* 0x00B158 */ - u64 ce_ure_buf_flush10; /* 0x00B160 */ - u64 ce_ure_buf_flush11; /* 0x00B168 */ - u64 ce_ure_buf_flush12; /* 0x00B170 */ - u64 ce_ure_buf_flush13; /* 0x00B178 */ - u64 ce_ure_buf_flush20; /* 0x00B180 */ - u64 ce_ure_buf_flush21; /* 0x00B188 */ - u64 ce_ure_buf_flush22; /* 0x00B190 */ - u64 ce_ure_buf_flush23; /* 0x00B198 */ - u64 ce_ure_pcie_control1; /* 0x00B1A0 */ - u64 ce_ure_pcie_control2; /* 0x00B1A8 */ - - u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */ - - /* Upstream Data Buffer, Port1 */ - struct ce_ure_maint_ups_dat1_data { - u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */ - u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */ - u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */ - } ce_ure_maint_ups_dat1; - - /* Upstream Header Buffer, Port1 */ - struct ce_ure_maint_ups_hdr1_data { - u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */ - u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */ - u64 parity[512]; /* 0x011000 -- 0x011FF8 */ - } ce_ure_maint_ups_hdr1; - - /* Upstream Data Buffer, Port2 */ - struct ce_ure_maint_ups_dat2_data { - u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */ - u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */ - u64 parity[512]; /* 0x014000 -- 0x014FF8 */ - } ce_ure_maint_ups_dat2; - - /* Upstream Header Buffer, Port2 */ - struct ce_ure_maint_ups_hdr2_data { - u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */ - u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */ - u64 parity[512]; /* 0x017000 -- 0x017FF8 */ - } ce_ure_maint_ups_hdr2; - - /* Downstream Data Buffer */ - struct ce_ure_maint_dns_dat_data { - u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */ - u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */ - u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */ - } ce_ure_maint_dns_dat; - - /* Downstream Header Buffer */ - struct ce_ure_maint_dns_hdr_data { - u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */ - u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */ - u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */ - } ce_ure_maint_dns_hdr; - - /* RCI Buffer Data */ - struct ce_ure_maint_rci_data { - u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */ - u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */ - } ce_ure_maint_rci; - - /* Response Queue */ - u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */ - - u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */ - - /* Admin Build-a-Packet Buffer */ - struct ce_adm_maint_bap_buf_data { - u64 data63_0[258]; /* 0x024000 -- 0x024808 */ - u64 data127_64[258]; /* 0x024810 -- 0x025018 */ - u64 parity[258]; /* 0x025020 -- 0x025828 */ - } ce_adm_maint_bap_buf; - - u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */ - - /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */ - u64 ce_ure_ate40[TIOCE_NUM_M40_ATES]; - - /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */ - u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES]; - - u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */ - - /* - * DRE: Down Stream Request Engine - */ - u64 ce_dre_dyn_credit_status1; /* 0x040010 */ - u64 ce_dre_dyn_credit_status2; /* 0x040018 */ - u64 ce_dre_last_credit_status1; /* 0x040020 */ - u64 ce_dre_last_credit_status2; /* 0x040028 */ - u64 ce_dre_credit_limit1; /* 0x040030 */ - u64 ce_dre_credit_limit2; /* 0x040038 */ - u64 ce_dre_force_credit1; /* 0x040040 */ - u64 ce_dre_force_credit2; /* 0x040048 */ - u64 ce_dre_debug_mux1; /* 0x040050 */ - u64 ce_dre_debug_mux2; /* 0x040058 */ - u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */ - u64 ce_dre_ssp_err_addr; /* 0x040068 */ - u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */ - u64 ce_dre_comp_err_addr; /* 0x040078 */ - u64 ce_dre_req_status; /* 0x040080 */ - u64 ce_dre_config1; /* 0x040088 */ - u64 ce_dre_config2; /* 0x040090 */ - u64 ce_dre_config_req_status; /* 0x040098 */ - u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */ - u64 ce_dre_dyn_fifo; /* 0x040100 */ - u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */ - u64 ce_dre_last_fifo; /* 0x040120 */ - - u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */ - - /* DRE Downstream Head Queue */ - struct ce_dre_maint_ds_head_queue { - u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */ - u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */ - u64 parity[32]; /* 0x040400 -- 0x0404F8 */ - } ce_dre_maint_ds_head_q; - - u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */ - - /* DRE Downstream Data Queue */ - struct ce_dre_maint_ds_data_queue { - u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */ - u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */ - u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */ - u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */ - u64 parity[256]; /* 0x043000 -- 0x0437F8 */ - u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */ - } ce_dre_maint_ds_data_q; - - /* DRE URE Upstream Response Queue */ - struct ce_dre_maint_ure_us_rsp_queue { - u64 data63_0[8]; /* 0x044000 -- 0x044038 */ - u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */ - u64 data127_64[8]; /* 0x044100 -- 0x044138 */ - u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */ - u64 parity[8]; /* 0x044200 -- 0x044238 */ - u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */ - } ce_dre_maint_ure_us_rsp_q; - - u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */ - - u64 ce_end_of_struct; /* 0x044400 */ -} tioce_t; - -/* ce_lsiX_gb_cfg1 register bit masks & shifts */ -#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0 -#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0) -#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8 -#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8) -#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12 -#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12) -#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15 -#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15) -#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16 -#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16) -#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18 -#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18) -#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19 -#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19) -#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20 -#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20) -#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24 -#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24) - -/* ce_adm_int_mask/ce_adm_int_status register bit defines */ -#define CE_ADM_INT_CE_ERROR_SHFT 0 -#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1 -#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2 -#define CE_ADM_INT_PCIE_ERROR_SHFT 3 -#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4 -#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5 -#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6 -#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7 -#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8 -#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9 -#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10 -#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11 -#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12 -#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13 -#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/ -#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14 -#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15 -#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16 -#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17 -#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22 -#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23 - -/* ce_adm_force_int register bit defines */ -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2 -#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6 -#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7 -#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8 - -/* ce_adm_int_dest register bit masks & shifts */ -#define INTR_VECTOR_SHFT 56 - -/* ce_adm_error_mask and ce_adm_error_summary register bit masks */ -#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0) -#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1) -#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2) -#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3) -#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4) -#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5) -#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6) -#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7) -#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8) -#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9) -#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10) -#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11) -#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12) -#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13) -#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14) -#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15) -#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16) -#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17) -#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18) -#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19) -#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20) -#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21) -#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22) -#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23) -#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24) -#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25) -#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26) -#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27) -#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28) -#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29) -#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30) -#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31) -#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32) -#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33) -#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34) -#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35) -#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36) -#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37) -#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38) -#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39) -#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40) -#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41) -#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42) -#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43) -#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44) -#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45) -#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46) -#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47) -#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48) -#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49) -#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50) -#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51) -#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52) -#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53) -#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54) -#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55) -#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56) -#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57) -#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58) -#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59) -#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60) -#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61) - -/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */ -#define FLUSH_SEL_PORT1_PIPE0_SHFT 0 -#define FLUSH_SEL_PORT1_PIPE1_SHFT 4 -#define FLUSH_SEL_PORT1_PIPE2_SHFT 8 -#define FLUSH_SEL_PORT1_PIPE3_SHFT 12 -#define FLUSH_SEL_PORT2_PIPE0_SHFT 16 -#define FLUSH_SEL_PORT2_PIPE1_SHFT 20 -#define FLUSH_SEL_PORT2_PIPE2_SHFT 24 -#define FLUSH_SEL_PORT2_PIPE3_SHFT 28 - -/* ce_dre_config1 register bit masks and shifts */ -#define CE_DRE_RO_ENABLE (0x1ULL << 0) -#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1) -#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2) -#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3) -#define CE_DRE_ADDR_MODE_SHFT 4 - -/* ce_dre_config_req_status register bit masks */ -#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0) -#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3) -#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4) -#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5) - -/* ce_ure_control register bit masks & shifts */ -#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0) -#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4) -#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5) -#define CE_URE_WRT_MRG_TIMER_SHFT 12 -#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT) -#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \ - CE_URE_WRT_MRG_TIMER_SHFT) & \ - CE_URE_WRT_MRG_TIMER_MASK) -#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24) -#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32) -#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33) -#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34) -#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35) -#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36) -#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37) -#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38) -#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39) -#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40) -#define CE_URE_MALFORM_DISABLE (0x1ULL << 44) -#define CE_URE_UNSUP_DISABLE (0x1ULL << 45) - -/* ce_ure_page_map register bit masks & shifts */ -#define CE_URE_ATE3240_ENABLE (0x1ULL << 0) -#define CE_URE_ATE40_ENABLE (0x1ULL << 1) -#define CE_URE_PAGESIZE_SHFT 4 -#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT) -#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT) - -/* ce_ure_pipe_sel register bit masks & shifts */ -#define PKT_TRAFIC_SHRT 16 -#define BUS_SRC_ID_SHFT 8 -#define DEV_SRC_ID_SHFT 3 -#define FNC_SRC_ID_SHFT 0 -#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT) -#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT) -#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT) -#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT) -#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \ - CE_URE_BUS_MASK) -#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \ - CE_URE_DEV_MASK) -#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \ - CE_URE_FNC_MASK) - -#define CE_URE_SEL1_SHFT 0 -#define CE_URE_SEL2_SHFT 20 -#define CE_URE_SEL3_SHFT 40 -#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT) -#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT) -#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT) - - -/* ce_ure_pipe_mask register bit masks & shifts */ -#define CE_URE_MASK1_SHFT 0 -#define CE_URE_MASK2_SHFT 20 -#define CE_URE_MASK3_SHFT 40 -#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT) -#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT) -#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT) - - -/* ce_ure_pcie_control1 register bit masks & shifts */ -#define CE_URE_SI (0x1ULL << 0) -#define CE_URE_ELAL_SHFT 4 -#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT) -#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \ - CE_URE_ELAL_MASK) -#define CE_URE_ELAL1_SHFT 8 -#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT) -#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \ - CE_URE_ELAL1_MASK) -#define CE_URE_SCC (0x1ULL << 12) -#define CE_URE_PN1_SHFT 16 -#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT) -#define CE_URE_PN2_SHFT 24 -#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT) -#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \ - CE_URE_PN1_MASK) -#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \ - CE_URE_PN2_MASK) - -/* ce_ure_pcie_control2 register bit masks & shifts */ -#define CE_URE_ABP (0x1ULL << 0) -#define CE_URE_PCP (0x1ULL << 1) -#define CE_URE_MSP (0x1ULL << 2) -#define CE_URE_AIP (0x1ULL << 3) -#define CE_URE_PIP (0x1ULL << 4) -#define CE_URE_HPS (0x1ULL << 5) -#define CE_URE_HPC (0x1ULL << 6) -#define CE_URE_SPLV_SHFT 7 -#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT) -#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \ - CE_URE_SPLV_MASK) -#define CE_URE_SPLS_SHFT 15 -#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT) -#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \ - CE_URE_SPLS_MASK) -#define CE_URE_PSN1_SHFT 19 -#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT) -#define CE_URE_PSN2_SHFT 32 -#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT) -#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \ - CE_URE_PSN1_MASK) -#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \ - CE_URE_PSN2_MASK) - -/* - * PIO address space ranges for CE - */ - -/* Local CE Registers Space */ -#define CE_PIO_MMR 0x00000000 -#define CE_PIO_MMR_LEN 0x04000000 - -/* PCI Compatible Config Space */ -#define CE_PIO_CONFIG_SPACE 0x04000000 -#define CE_PIO_CONFIG_SPACE_LEN 0x04000000 - -/* PCI I/O Space Alias */ -#define CE_PIO_IO_SPACE_ALIAS 0x08000000 -#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000 - -/* PCI Enhanced Config Space */ -#define CE_PIO_E_CONFIG_SPACE 0x10000000 -#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000 - -/* PCI I/O Space */ -#define CE_PIO_IO_SPACE 0x100000000 -#define CE_PIO_IO_SPACE_LEN 0x100000000 - -/* PCI MEM Space */ -#define CE_PIO_MEM_SPACE 0x200000000 -#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE - - -/* - * CE PCI Enhanced Config Space shifts & masks - */ -#define CE_E_CONFIG_BUS_SHFT 20 -#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT) -#define CE_E_CONFIG_DEVICE_SHFT 15 -#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT) -#define CE_E_CONFIG_FUNC_SHFT 12 -#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT) - -#endif /* __ASM_IA64_SN_TIOCE_H__ */ diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h deleted file mode 100644 index 32c32f30b099..000000000000 --- a/arch/ia64/include/asm/sn/tioce_provider.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_CE_PROVIDER_H -#define _ASM_IA64_SN_CE_PROVIDER_H - -#include <asm/sn/pcibus_provider_defs.h> -#include <asm/sn/tioce.h> - -/* - * Common TIOCE structure shared between the prom and kernel - * - * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE - * PROM VERSION. - */ -struct tioce_common { - struct pcibus_bussoft ce_pcibus; /* common pciio header */ - - u32 ce_rev; - u64 ce_kernel_private; - u64 ce_prom_private; -}; - -struct tioce_kernel { - struct tioce_common *ce_common; - spinlock_t ce_lock; - struct list_head ce_dmamap_list; - - u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES]; - u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES]; - u32 ce_ate3240_pagesize; - - u8 ce_port1_secondary; - - /* per-port resources */ - struct { - int dirmap_refcnt; - u64 dirmap_shadow; - } ce_port[TIOCE_NUM_PORTS]; -}; - -struct tioce_dmamap { - struct list_head ce_dmamap_list; /* headed by tioce_kernel */ - u32 refcnt; - - u64 nbytes; /* # bytes mapped */ - - u64 ct_start; /* coretalk start address */ - u64 pci_start; /* bus start address */ - - u64 __iomem *ate_hw;/* hw ptr of first ate in map */ - u64 *ate_shadow; /* shadow ptr of firat ate */ - u16 ate_count; /* # ate's in the map */ -}; - -extern int tioce_init_provider(void); - -#endif /* __ASM_IA64_SN_CE_PROVIDER_H */ diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h deleted file mode 100644 index e8ad0bb5b6c5..000000000000 --- a/arch/ia64/include/asm/sn/tiocp.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved. - */ -#ifndef _ASM_IA64_SN_PCI_TIOCP_H -#define _ASM_IA64_SN_PCI_TIOCP_H - -#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL -#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60) -#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60) - - -/***************************************************************************** - *********************** TIOCP MMR structure mapping *************************** - *****************************************************************************/ - -struct tiocp{ - - /* 0x000000-0x00FFFF -- Local Registers */ - - /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */ - u64 cp_id; /* 0x000000 */ - u64 cp_stat; /* 0x000008 */ - u64 cp_err_upper; /* 0x000010 */ - u64 cp_err_lower; /* 0x000018 */ - #define cp_err cp_err_lower - u64 cp_control; /* 0x000020 */ - u64 cp_req_timeout; /* 0x000028 */ - u64 cp_intr_upper; /* 0x000030 */ - u64 cp_intr_lower; /* 0x000038 */ - #define cp_intr cp_intr_lower - u64 cp_err_cmdword; /* 0x000040 */ - u64 _pad_000048; /* 0x000048 */ - u64 cp_tflush; /* 0x000050 */ - - /* 0x000058-0x00007F -- Bridge-specific Configuration */ - u64 cp_aux_err; /* 0x000058 */ - u64 cp_resp_upper; /* 0x000060 */ - u64 cp_resp_lower; /* 0x000068 */ - #define cp_resp cp_resp_lower - u64 cp_tst_pin_ctrl; /* 0x000070 */ - u64 cp_addr_lkerr; /* 0x000078 */ - - /* 0x000080-0x00008F -- PMU & MAP */ - u64 cp_dir_map; /* 0x000080 */ - u64 _pad_000088; /* 0x000088 */ - - /* 0x000090-0x00009F -- SSRAM */ - u64 cp_map_fault; /* 0x000090 */ - u64 _pad_000098; /* 0x000098 */ - - /* 0x0000A0-0x0000AF -- Arbitration */ - u64 cp_arb; /* 0x0000A0 */ - u64 _pad_0000A8; /* 0x0000A8 */ - - /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */ - u64 cp_ate_parity_err; /* 0x0000B0 */ - u64 _pad_0000B8; /* 0x0000B8 */ - - /* 0x0000C0-0x0000FF -- PCI/GIO */ - u64 cp_bus_timeout; /* 0x0000C0 */ - u64 cp_pci_cfg; /* 0x0000C8 */ - u64 cp_pci_err_upper; /* 0x0000D0 */ - u64 cp_pci_err_lower; /* 0x0000D8 */ - #define cp_pci_err cp_pci_err_lower - u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */ - - /* 0x000100-0x0001FF -- Interrupt */ - u64 cp_int_status; /* 0x000100 */ - u64 cp_int_enable; /* 0x000108 */ - u64 cp_int_rst_stat; /* 0x000110 */ - u64 cp_int_mode; /* 0x000118 */ - u64 cp_int_device; /* 0x000120 */ - u64 cp_int_host_err; /* 0x000128 */ - u64 cp_int_addr[8]; /* 0x0001{30,,,68} */ - u64 cp_err_int_view; /* 0x000170 */ - u64 cp_mult_int; /* 0x000178 */ - u64 cp_force_always[8]; /* 0x0001{80,,,B8} */ - u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */ - - /* 0x000200-0x000298 -- Device */ - u64 cp_device[4]; /* 0x0002{00,,,18} */ - u64 _pad_000220[4]; /* 0x0002{20,,,38} */ - u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */ - u64 _pad_000260[4]; /* 0x0002{60,,,78} */ - u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */ - #define cp_even_resp cp_rrb_map[0] /* 0x000280 */ - #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */ - u64 cp_resp_status; /* 0x000290 */ - u64 cp_resp_clear; /* 0x000298 */ - - u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */ - - /* 0x000300-0x0003F8 -- Buffer Address Match Registers */ - struct { - u64 upper; /* 0x0003{00,,,F0} */ - u64 lower; /* 0x0003{08,,,F8} */ - } cp_buf_addr_match[16]; - - /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */ - struct { - u64 flush_w_touch; /* 0x000{400,,,5C0} */ - u64 flush_wo_touch; /* 0x000{408,,,5C8} */ - u64 inflight; /* 0x000{410,,,5D0} */ - u64 prefetch; /* 0x000{418,,,5D8} */ - u64 total_pci_retry; /* 0x000{420,,,5E0} */ - u64 max_pci_retry; /* 0x000{428,,,5E8} */ - u64 max_latency; /* 0x000{430,,,5F0} */ - u64 clear_all; /* 0x000{438,,,5F8} */ - } cp_buf_count[8]; - - - /* 0x000600-0x0009FF -- PCI/X registers */ - u64 cp_pcix_bus_err_addr; /* 0x000600 */ - u64 cp_pcix_bus_err_attr; /* 0x000608 */ - u64 cp_pcix_bus_err_data; /* 0x000610 */ - u64 cp_pcix_pio_split_addr; /* 0x000618 */ - u64 cp_pcix_pio_split_attr; /* 0x000620 */ - u64 cp_pcix_dma_req_err_attr; /* 0x000628 */ - u64 cp_pcix_dma_req_err_addr; /* 0x000630 */ - u64 cp_pcix_timeout; /* 0x000638 */ - - u64 _pad_000640[24]; /* 0x000{640,,,6F8} */ - - /* 0x000700-0x000737 -- Debug Registers */ - u64 cp_ct_debug_ctl; /* 0x000700 */ - u64 cp_br_debug_ctl; /* 0x000708 */ - u64 cp_mux3_debug_ctl; /* 0x000710 */ - u64 cp_mux4_debug_ctl; /* 0x000718 */ - u64 cp_mux5_debug_ctl; /* 0x000720 */ - u64 cp_mux6_debug_ctl; /* 0x000728 */ - u64 cp_mux7_debug_ctl; /* 0x000730 */ - - u64 _pad_000738[89]; /* 0x000{738,,,9F8} */ - - /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */ - struct { - u64 cp_buf_addr; /* 0x000{A00,,,AF0} */ - u64 cp_buf_attr; /* 0X000{A08,,,AF8} */ - } cp_pcix_read_buf_64[16]; - - struct { - u64 cp_buf_addr; /* 0x000{B00,,,BE0} */ - u64 cp_buf_attr; /* 0x000{B08,,,BE8} */ - u64 cp_buf_valid; /* 0x000{B10,,,BF0} */ - u64 __pad1; /* 0x000{B18,,,BF8} */ - } cp_pcix_write_buf_64[8]; - - /* End of Local Registers -- Start of Address Map space */ - - char _pad_000c00[0x010000 - 0x000c00]; - - /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */ - u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */ - - char _pad_012000[0x14000 - 0x012000]; - - /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */ - u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */ - - char _pad_016000[0x18000 - 0x016000]; - - /* 0x18000-0x197F8 -- TIOCP Write Request Ram */ - u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */ - u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */ - u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */ - - char _pad_019800[0x1C000 - 0x019800]; - - /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */ - u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */ - u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */ - u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */ - - char _pad_01F000[0x20000 - 0x01F000]; - - /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */ - char _pad_020000[0x021000 - 0x20000]; - - /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */ - union { - u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */ - u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */ - u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */ - u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */ - - /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */ - union { - u8 c[0x1000 / 1]; /* 0x028000-0x029000 */ - u16 s[0x1000 / 2]; /* 0x028000-0x029000 */ - u32 l[0x1000 / 4]; /* 0x028000-0x029000 */ - u64 d[0x1000 / 8]; /* 0x028000-0x029000 */ - union { - u8 c[0x100 / 1]; - u16 s[0x100 / 2]; - u32 l[0x100 / 4]; - u64 d[0x100 / 8]; - } f[8]; - } cp_type1_cfg; /* 0x028000-0x029000 */ - - char _pad_029000[0x030000-0x029000]; - - /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } cp_pci_iack; /* 0x030000-0x030007 */ - - char _pad_030007[0x040000-0x030008]; - - /* 0x040000-0x040007 -- PCIX Special Cycle */ - union { - u8 c[8 / 1]; - u16 s[8 / 2]; - u32 l[8 / 4]; - u64 d[8 / 8]; - } cp_pcix_cycle; /* 0x040000-0x040007 */ - - char _pad_040007[0x200000-0x040008]; - - /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */ - union { - u8 c[0x100000 / 1]; - u16 s[0x100000 / 2]; - u32 l[0x100000 / 4]; - u64 d[0x100000 / 8]; - } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */ - - #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)] - - char _pad_800000[0xA00000-0x800000]; - - /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */ - union { - u8 c[0x100000 / 1]; - u16 s[0x100000 / 2]; - u32 l[0x100000 / 4]; - u64 d[0x100000 / 8]; - } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */ - - #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)] - -}; - -#endif /* _ASM_IA64_SN_PCI_TIOCP_H */ diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h deleted file mode 100644 index d29728492f36..000000000000 --- a/arch/ia64/include/asm/sn/tiocx.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved. - */ - -#ifndef _ASM_IA64_SN_TIO_TIOCX_H -#define _ASM_IA64_SN_TIO_TIOCX_H - -#ifdef __KERNEL__ - -struct cx_id_s { - unsigned int part_num; - unsigned int mfg_num; - int nasid; -}; - -struct cx_dev { - struct cx_id_s cx_id; - int bt; /* board/blade type */ - void *soft; /* driver specific */ - struct hubdev_info *hubdev; - struct device dev; - struct cx_drv *driver; -}; - -struct cx_device_id { - unsigned int part_num; - unsigned int mfg_num; -}; - -struct cx_drv { - char *name; - const struct cx_device_id *id_table; - struct device_driver driver; - int (*probe) (struct cx_dev * dev, const struct cx_device_id * id); - int (*remove) (struct cx_dev * dev); -}; - -/* create DMA address by stripping AS bits */ -#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL) - -#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \ - ((((u64)(a)) & 0xffffc000000000UL) <<2)) - -#define TIO_CE_ASIC_PARTNUM 0xce00 -#define TIOCX_CORELET 3 - -/* These are taken from tio_mmr_as.h */ -#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL) -#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL) -#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL) -#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL - -#define to_cx_dev(n) container_of(n, struct cx_dev, dev) -#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver) - -extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int); -extern void tiocx_irq_free(struct sn_irq_info *); -extern int cx_device_unregister(struct cx_dev *); -extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int); -extern int cx_driver_unregister(struct cx_drv *); -extern int cx_driver_register(struct cx_drv *); -extern u64 tiocx_dma_addr(u64 addr); -extern u64 tiocx_swin_base(int nasid); -extern void tiocx_mmr_store(int nasid, u64 offset, u64 value); -extern u64 tiocx_mmr_load(int nasid, u64 offset); - -#endif // __KERNEL__ -#endif // _ASM_IA64_SN_TIO_TIOCX__ diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h deleted file mode 100644 index 8e04ee211e59..000000000000 --- a/arch/ia64/include/asm/sn/types.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved. - * Copyright (C) 1999 by Ralf Baechle - */ -#ifndef _ASM_IA64_SN_TYPES_H -#define _ASM_IA64_SN_TYPES_H - -#include <linux/types.h> - -typedef unsigned long cpuid_t; -typedef signed short nasid_t; /* node id in numa-as-id space */ -typedef signed char partid_t; /* partition ID type */ -typedef unsigned int moduleid_t; /* user-visible module number type */ -typedef unsigned int cmoduleid_t; /* kernel compact module id type */ -typedef unsigned char slotid_t; /* slot (blade) within module */ -typedef unsigned char slabid_t; /* slab (asic) within slot */ -typedef u64 nic_t; -typedef unsigned long iopaddr_t; -typedef unsigned long paddr_t; -typedef short cnodeid_t; - -#endif /* _ASM_IA64_SN_TYPES_H */ diff --git a/arch/ia64/include/asm/switch_to.h b/arch/ia64/include/asm/switch_to.h index b10f31ec522c..9011e90a6b97 100644 --- a/arch/ia64/include/asm/switch_to.h +++ b/arch/ia64/include/asm/switch_to.h @@ -69,7 +69,6 @@ extern void ia64_load_extra (struct task_struct *task); if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) && \ (task_cpu(current) != \ task_thread_info(current)->last_cpu))) { \ - platform_migrate(current); \ task_thread_info(current)->last_cpu = task_cpu(current); \ } \ } while (0) diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 86ec034ba499..f1f257d632b3 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -45,7 +45,6 @@ #include <asm/pgalloc.h> #include <asm/processor.h> #include <asm/tlbflush.h> -#include <asm/machvec.h> #include <asm-generic/tlb.h> diff --git a/arch/ia64/include/asm/uv/uv.h b/arch/ia64/include/asm/uv/uv.h index 71df93ee3bc0..48d4526bf4cd 100644 --- a/arch/ia64/include/asm/uv/uv.h +++ b/arch/ia64/include/asm/uv/uv.h @@ -2,12 +2,29 @@ #ifndef _ASM_IA64_UV_UV_H #define _ASM_IA64_UV_UV_H -#include <asm/sn/simulator.h> +#ifdef CONFIG_IA64_SGI_UV +extern bool ia64_is_uv; static inline int is_uv_system(void) { - /* temporary support for running on hardware simulator */ - return IS_MEDUSA() || ia64_platform_is("uv"); + return ia64_is_uv; } +void __init uv_probe_system_type(void); +void __init uv_setup(char **cmdline_p); +#else /* CONFIG_IA64_SGI_UV */ +static inline int is_uv_system(void) +{ + return false; +} + +static inline void __init uv_probe_system_type(void) +{ +} + +static inline void __init uv_setup(char **cmdline_p) +{ +} +#endif /* CONFIG_IA64_SGI_UV */ + #endif /* _ASM_IA64_UV_UV_H */ |