diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/boards')
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/Kconfig | 30 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/Makefile | 8 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/acvilon.c | 543 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/cm_bf561.c | 556 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/ezkit.c | 688 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf561/boards/tepla.c | 162 |
6 files changed, 0 insertions, 1987 deletions
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig deleted file mode 100644 index 10e977b56710..000000000000 --- a/arch/blackfin/mach-bf561/boards/Kconfig +++ /dev/null @@ -1,30 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -choice - prompt "System type" - default BFIN561_EZKIT - help - Select your board! - -config BFIN561_EZKIT - bool "BF561-EZKIT" - help - BF561-EZKIT-LITE board support. - -config BFIN561_TEPLA - bool "BF561-TEPLA" - help - BF561-TEPLA board support. - -config BFIN561_BLUETECHNIX_CM - bool "Bluetechnix CM-BF561" - help - CM-BF561 support for EVAL- and DEV-Board. - -config BFIN561_ACVILON - bool "BF561-ACVILON" - help - BF561-ACVILON System On Module support (SO-DIMM 144). - For more information about Acvilon BF561 SoM - please go to http://www.niistt.ru/ - -endchoice diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile deleted file mode 100644 index a5879f7857ad..000000000000 --- a/arch/blackfin/mach-bf561/boards/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# arch/blackfin/mach-bf561/boards/Makefile -# - -obj-$(CONFIG_BFIN561_ACVILON) += acvilon.o -obj-$(CONFIG_BFIN561_BLUETECHNIX_CM) += cm_bf561.o -obj-$(CONFIG_BFIN561_EZKIT) += ezkit.o -obj-$(CONFIG_BFIN561_TEPLA) += tepla.o diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c deleted file mode 100644 index 696cc9d7820a..000000000000 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ /dev/null @@ -1,543 +0,0 @@ -/* - * File: arch/blackfin/mach-bf561/acvilon.c - * Based on: arch/blackfin/mach-bf561/ezkit.c - * Author: - * - * Created: - * Description: - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * Copyright 2009 CJSC "NII STT" - * - * Bugs: - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * - * For more information about Acvilon BF561 SoM please - * go to http://www.niistt.ru/ - * - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/plat-ram.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/jiffies.h> -#include <linux/i2c-pca-platform.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/portmux.h> -#include <asm/dpmc.h> -#include <asm/cacheflush.h> -#include <linux/i2c.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "Acvilon board"; - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x20000000, - .end = 0x20000000 + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF15, - .end = IRQ_PF15, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .port1_disable = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760-hcd", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -static struct resource bfin_i2c_pca_resources[] = { - { - .name = "pca9564-regs", - .start = 0x2C000000, - .end = 0x2C000000 + 16, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT, - }, { - - .start = IRQ_PF8, - .end = IRQ_PF8, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -struct i2c_pca9564_pf_platform_data pca9564_platform_data = { - .gpio = -1, - .i2c_clock_speed = 330000, - .timeout = HZ, -}; - -/* PCA9564 I2C Bus driver */ -static struct platform_device bfin_i2c_pca_device = { - .name = "i2c-pca-platform", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_i2c_pca_resources), - .resource = bfin_i2c_pca_resources, - .dev = { - .platform_data = &pca9564_platform_data, - } -}; - -/* I2C devices fitted. */ -static struct i2c_board_info acvilon_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("ds1339", 0x68), - }, - { - I2C_BOARD_INFO("tcn75", 0x49), - }, -}; - -#if IS_ENABLED(CONFIG_MTD_PLATRAM) -static struct platdata_mtd_ram mtd_ram_data = { - .mapname = "rootfs(RAM)", - .bankwidth = 4, -}; - -static struct resource mtd_ram_resource = { - .start = 0x4000000, - .end = 0x5ffffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mtd_ram_device = { - .name = "mtd-ram", - .id = 0, - .dev = { - .platform_data = &mtd_ram_data, - }, - .num_resources = 1, - .resource = &mtd_ram_resource, -}; -#endif - -#if IS_ENABLED(CONFIG_SMSC911X) -#include <linux/smsc911x.h> -static struct resource smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .start = 0x28000000, - .end = 0x28000000 + 0xFF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL + 2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART_TX, - .end = IRQ_UART_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_RX, - .end = IRQ_UART_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_ERROR, - .end = IRQ_UART_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART_TX, - .end = CH_UART_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART_RX, - .end = CH_UART_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - /* Passed to driver */ - .platform_data = &bfin_uart0_peripherals, - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) - -static struct mtd_partition bfin_plat_nand_partitions[] = { - { - .name = "params(nand)", - .size = 32 * 1024 * 1024, - .offset = 0, - }, { - .name = "userfs(nand)", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - }, -}; - -#define BFIN_NAND_PLAT_CLE 2 -#define BFIN_NAND_PLAT_ALE 3 - -static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *this = mtd_to_nand(mtd); - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); - else - writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); -} - -#define BFIN_NAND_PLAT_READY GPIO_PF10 -static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) -{ - return gpio_get_value(BFIN_NAND_PLAT_READY); -} - -static struct platform_nand_data bfin_plat_nand_data = { - .chip = { - .nr_chips = 1, - .chip_delay = 30, - .partitions = bfin_plat_nand_partitions, - .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), - }, - .ctrl = { - .cmd_ctrl = bfin_plat_nand_cmd_ctrl, - .dev_ready = bfin_plat_nand_dev_ready, - }, -}; - -#define MAX(x, y) (x > y ? x : y) -static struct resource bfin_plat_nand_resources = { - .start = 0x24000000, - .end = 0x24000000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), - .flags = IORESOURCE_MEM, -}; - -static struct platform_device bfin_async_nand_device = { - .name = "gen_nand", - .id = -1, - .num_resources = 1, - .resource = &bfin_plat_nand_resources, - .dev = { - .platform_data = &bfin_plat_nand_data, - }, -}; - -static void bfin_plat_nand_init(void) -{ - gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); -} -#else -static void bfin_plat_nand_init(void) -{ -} -#endif - -#if IS_ENABLED(CONFIG_MTD_DATAFLASH) -static struct mtd_partition bfin_spi_dataflash_partitions[] = { - { - .name = "bootloader", - .size = 0x4200, - .offset = 0, - .mask_flags = MTD_CAP_ROM}, - { - .name = "u-boot", - .size = 0x42000, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "u-boot(params)", - .size = 0x4200, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "kernel", - .size = 0x294000, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "params", - .size = 0x42000, - .offset = MTDPART_OFS_APPEND, - }, - { - .name = "rootfs", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct flash_platform_data bfin_spi_dataflash_data = { - .name = "SPI Dataflash", - .parts = bfin_spi_dataflash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions), -}; - -/* DataFlash chip */ -static struct bfin5xx_spi_chip data_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip */ -}; -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_SPI_SPIDEV) - { - .modalias = "spidev", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 3, - }, -#endif -#if IS_ENABLED(CONFIG_MTD_DATAFLASH) - { /* DataFlash chip */ - .modalias = "mtd_dataflash", - .max_speed_hz = 33250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 2, /* Framework chip select */ - .platform_data = &bfin_spi_dataflash_data, - .controller_data = &data_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif -}; - -static struct resource bfin_gpios_resources = { - .start = 31, -/* .end = MAX_BLACKFIN_GPIOS - 1, */ - .end = 32, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device bfin_gpios_device = { - .name = "simple-gpio", - .id = -1, - .num_resources = 1, - .resource = &bfin_gpios_resources, -}; - -static const unsigned int cclk_vlev_datasheet[] = { - VRPAIR(VLEV_085, 250000000), - VRPAIR(VLEV_090, 300000000), - VRPAIR(VLEV_095, 313000000), - VRPAIR(VLEV_100, 350000000), - VRPAIR(VLEV_105, 400000000), - VRPAIR(VLEV_110, 444000000), - VRPAIR(VLEV_115, 450000000), - VRPAIR(VLEV_120, 475000000), - VRPAIR(VLEV_125, 500000000), - VRPAIR(VLEV_130, 600000000), -}; - -static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { - .tuple_tab = cclk_vlev_datasheet, - .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), - .vr_settling_time = 25 /* us */ , -}; - -static struct platform_device bfin_dpmc = { - .name = "bfin dpmc", - .dev = { - .platform_data = &bfin_dmpc_vreg_data, - }, -}; - -static struct platform_device *acvilon_devices[] __initdata = { - &bfin_dpmc, - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - - &bfin_gpios_device, - -#if IS_ENABLED(CONFIG_SMSC911X) - &smsc911x_device, -#endif - - &bfin_i2c_pca_device, - -#if IS_ENABLED(CONFIG_MTD_NAND_PLATFORM) - &bfin_async_nand_device, -#endif - -#if IS_ENABLED(CONFIG_MTD_PLATRAM) - &mtd_ram_device, -#endif - -}; - -static int __init acvilon_init(void) -{ - int ret; - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - - bfin_plat_nand_init(); - ret = - platform_add_devices(acvilon_devices, ARRAY_SIZE(acvilon_devices)); - if (ret < 0) - return ret; - - i2c_register_board_info(0, acvilon_i2c_devs, - ARRAY_SIZE(acvilon_i2c_devs)); - - bfin_write_FIO0_FLAG_C(1 << 14); - msleep(5); - bfin_write_FIO0_FLAG_S(1 << 14); - - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); - return 0; -} - -arch_initcall(acvilon_init); - -static struct platform_device *acvilon_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(acvilon_early_devices, - ARRAY_SIZE(acvilon_early_devices)); -} diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c deleted file mode 100644 index 10c57771822d..000000000000 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ /dev/null @@ -1,556 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2008-2009 Bluetechnix - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> -#endif -#include <linux/ata_platform.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/portmux.h> -#include <asm/dpmc.h> -#include <linux/mtd/physmap.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "Bluetechnix CM BF561"; - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* all SPI peripherals info goes here */ - -#if IS_ENABLED(CONFIG_MTD_M25P80) -static struct mtd_partition bfin_spi_flash_partitions[] = { - { - .name = "bootloader(spi)", - .size = 0x00020000, - .offset = 0, - .mask_flags = MTD_CAP_ROM - }, { - .name = "linux kernel(spi)", - .size = 0xe0000, - .offset = 0x20000 - }, { - .name = "file system(spi)", - .size = 0x700000, - .offset = 0x00100000, - } -}; - -static struct flash_platform_data bfin_spi_flash_data = { - .name = "m25p80", - .parts = bfin_spi_flash_partitions, - .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), - .type = "m25p64", -}; - -/* SPI flash chip (m25p64) */ -static struct bfin5xx_spi_chip spi_flash_chip_info = { - .enable_dma = 0, /* use dma transfer with this chip*/ -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_MTD_M25P80) - { - /* the modalias must be the same as spi device driver name */ - .modalias = "m25p80", /* Name of spi_driver for this device */ - .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, /* Framework bus number */ - .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ - .platform_data = &bfin_spi_flash_data, - .controller_data = &spi_flash_chip_info, - .mode = SPI_MODE_3, - }, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - { - .modalias = "ad183x", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 4, - }, -#endif -#if IS_ENABLED(CONFIG_MMC_SPI) - { - .modalias = "mmc_spi", - .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_3, - }, -#endif -}; - -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - }, -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif /* spi master and devices */ - - -#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) -static struct platform_device hitachi_fb_device = { - .name = "hitachi-tx09", -}; -#endif - - -#if IS_ENABLED(CONFIG_SMC91X) -#include <linux/smc91x.h> - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | - SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x28000300, - .end = 0x28000300 + 16, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF0, - .end = IRQ_PF0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SMSC911X) -#include <linux/smsc911x.h> - -static struct resource smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .start = 0x24008000, - .end = 0x24008000 + 0xFF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_PF43, - .end = IRQ_PF43, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .flags = SMSC911X_USE_16BIT, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(smsc911x_resources), - .resource = smsc911x_resources, - .dev = { - .platform_data = &smsc911x_config, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x24000000, - .end = 0x24000000 + 0x100, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF45, - .end = IRQ_PF45, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x24008000, - .end = 0x24008000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x24008004, - .end = 0x24008004, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF47, - .end = IRQ_PF47, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART_TX, - .end = IRQ_UART_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_RX, - .end = IRQ_UART_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_ERROR, - .end = IRQ_UART_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART_TX, - .end = CH_UART_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART_RX, - .end = CH_UART_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_PATA_PLATFORM) -#define PATA_INT IRQ_PF46 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 2, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x2400C000, - .end = 0x2400C001F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2400D018, - .end = 0x2400D01B, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) -static struct mtd_partition para_partitions[] = { - { - .name = "bootloader(nor)", - .size = 0x40000, - .offset = 0, - }, { - .name = "linux kernel(nor)", - .size = 0x100000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(nor)", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data para_flash_data = { - .width = 2, - .parts = para_partitions, - .nr_parts = ARRAY_SIZE(para_partitions), -}; - -static struct resource para_flash_resource = { - .start = 0x20000000, - .end = 0x207fffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device para_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = ¶_flash_data, - }, - .num_resources = 1, - .resource = ¶_flash_resource, -}; -#endif - -static const unsigned int cclk_vlev_datasheet[] = -{ - VRPAIR(VLEV_085, 250000000), - VRPAIR(VLEV_090, 300000000), - VRPAIR(VLEV_095, 313000000), - VRPAIR(VLEV_100, 350000000), - VRPAIR(VLEV_105, 400000000), - VRPAIR(VLEV_110, 444000000), - VRPAIR(VLEV_115, 450000000), - VRPAIR(VLEV_120, 475000000), - VRPAIR(VLEV_125, 500000000), - VRPAIR(VLEV_130, 600000000), -}; - -static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { - .tuple_tab = cclk_vlev_datasheet, - .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), - .vr_settling_time = 25 /* us */, -}; - -static struct platform_device bfin_dpmc = { - .name = "bfin dpmc", - .dev = { - .platform_data = &bfin_dmpc_vreg_data, - }, -}; - -static struct platform_device *cm_bf561_devices[] __initdata = { - - &bfin_dpmc, - -#if IS_ENABLED(CONFIG_FB_HITACHI_TX09) - &hitachi_fb_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) - &isp1362_hcd_device, -#endif - -#if IS_ENABLED(CONFIG_SMC91X) - &smc91x_device, -#endif - -#if IS_ENABLED(CONFIG_SMSC911X) - &smsc911x_device, -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) - &net2272_bfin_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_PATA_PLATFORM) - &bfin_pata_device, -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) - ¶_flash_device, -#endif -}; - -static int __init net2272_init(void) -{ -#if IS_ENABLED(CONFIG_USB_NET2272) - int ret; - - ret = gpio_request(GPIO_PF46, "net2272"); - if (ret) - return ret; - - /* Reset USB Chip, PF46 */ - gpio_direction_output(GPIO_PF46, 0); - mdelay(2); - gpio_set_value(GPIO_PF46, 1); -#endif - - return 0; -} - -static int __init cm_bf561_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - platform_add_devices(cm_bf561_devices, ARRAY_SIZE(cm_bf561_devices)); -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif - -#if IS_ENABLED(CONFIG_PATA_PLATFORM) - irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); -#endif - - if (net2272_init()) - pr_warning("unable to configure net2272; it probably won't work\n"); - - return 0; -} - -arch_initcall(cm_bf561_init); - -static struct platform_device *cm_bf561_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(cm_bf561_early_devices, - ARRAY_SIZE(cm_bf561_early_devices)); -} diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c deleted file mode 100644 index acc5363f60c6..000000000000 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ /dev/null @@ -1,688 +0,0 @@ -/* - * Copyright 2004-2009 Analog Devices Inc. - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Licensed under the GPL-2 or later. - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/gpio/machine.h> -#include <asm/dma.h> -#include <asm/bfin5xx_spi.h> -#include <asm/portmux.h> -#include <asm/dpmc.h> - -/* - * Name the Board for the /proc/cpuinfo - */ -const char bfin_board_name[] = "ADI BF561-EZKIT"; - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) -#include <linux/usb/isp1760.h> -static struct resource bfin_isp1760_resources[] = { - [0] = { - .start = 0x2C0F0000, - .end = 0x203C0000 + 0xfffff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct isp1760_platform_data isp1760_priv = { - .is_isp1761 = 0, - .bus_width_16 = 1, - .port1_otg = 0, - .analog_oc = 0, - .dack_polarity_high = 0, - .dreq_polarity_high = 0, -}; - -static struct platform_device bfin_isp1760_device = { - .name = "isp1760", - .id = 0, - .dev = { - .platform_data = &isp1760_priv, - }, - .num_resources = ARRAY_SIZE(bfin_isp1760_resources), - .resource = bfin_isp1760_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) -#include <linux/usb/isp1362.h> - -static struct resource isp1362_hcd_resources[] = { - { - .start = 0x2c060000, - .end = 0x2c060000, - .flags = IORESOURCE_MEM, - }, { - .start = 0x2c060004, - .end = 0x2c060004, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PF8, - .end = IRQ_PF8, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct isp1362_platform_data isp1362_priv = { - .sel15Kres = 1, - .clknotstop = 0, - .oc_enable = 0, - .int_act_high = 0, - .int_edge_triggered = 0, - .remote_wakeup_connected = 0, - .no_power_switching = 1, - .power_switching_mode = 0, -}; - -static struct platform_device isp1362_hcd_device = { - .name = "isp1362-hcd", - .id = 0, - .dev = { - .platform_data = &isp1362_priv, - }, - .num_resources = ARRAY_SIZE(isp1362_hcd_resources), - .resource = isp1362_hcd_resources, -}; -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) -static struct resource net2272_bfin_resources[] = { - { - .start = 0x2C000000, - .end = 0x2C000000 + 0x7F, - .flags = IORESOURCE_MEM, - }, { - .start = 1, - .flags = IORESOURCE_BUS, - }, { - .start = IRQ_PF10, - .end = IRQ_PF10, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device net2272_bfin_device = { - .name = "net2272", - .id = -1, - .num_resources = ARRAY_SIZE(net2272_bfin_resources), - .resource = net2272_bfin_resources, -}; -#endif - -/* - * USB-LAN EzExtender board - * Driver needs to know address, irq and flag pin. - */ -#if IS_ENABLED(CONFIG_SMC91X) -#include <linux/smc91x.h> - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT | - SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - { - .name = "smc91x-regs", - .start = 0x2C010300, - .end = 0x2C010300 + 16, - .flags = IORESOURCE_MEM, - }, { - - .start = IRQ_PF9, - .end = IRQ_PF9, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART_TX, - .end = IRQ_UART_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_RX, - .end = IRQ_UART_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_ERROR, - .end = IRQ_UART_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART_TX, - .end = CH_UART_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART_RX, - .end = CH_UART_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) -static struct mtd_partition ezkit_partitions[] = { - { - .name = "bootloader(nor)", - .size = 0x40000, - .offset = 0, - }, { - .name = "linux kernel(nor)", - .size = 0x1C0000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "file system(nor)", - .size = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "config(nor)", - .size = 0x2000 * 7, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "u-boot env(nor)", - .size = 0x2000, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct physmap_flash_data ezkit_flash_data = { - .width = 2, - .parts = ezkit_partitions, - .nr_parts = ARRAY_SIZE(ezkit_partitions), -}; - -static struct resource ezkit_flash_resource = { - .start = 0x20000000, - .end = 0x207fffff, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ezkit_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ezkit_flash_data, - }, - .num_resources = 1, - .resource = &ezkit_flash_resource, -}; -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) -/* SPI (0) */ -static struct resource bfin_spi0_resource[] = { - [0] = { - .start = SPI0_REGBASE, - .end = SPI0_REGBASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = CH_SPI, - .end = CH_SPI, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = IRQ_SPI, - .end = IRQ_SPI, - .flags = IORESOURCE_IRQ, - } -}; - -/* SPI controller data */ -static struct bfin5xx_spi_master bfin_spi0_info = { - .num_chipselect = 8, - .enable_dma = 1, /* master has the ability to do dma transfer */ - .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, -}; - -static struct platform_device bfin_spi0_device = { - .name = "bfin-spi", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(bfin_spi0_resource), - .resource = bfin_spi0_resource, - .dev = { - .platform_data = &bfin_spi0_info, /* Passed to driver */ - }, -}; -#endif - -static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - { - .modalias = "ad183x", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 4, - .platform_data = "ad1836", /* only includes chip name for the moment */ - .mode = SPI_MODE_3, - }, -#endif -#if IS_ENABLED(CONFIG_SPI_SPIDEV) - { - .modalias = "spidev", - .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 0, - .chip_select = 1, - }, -#endif -}; - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) -#include <linux/input.h> -#include <linux/gpio_keys.h> - -static struct gpio_keys_button bfin_gpio_keys_table[] = { - {BTN_0, GPIO_PF5, 1, "gpio-keys: BTN0"}, - {BTN_1, GPIO_PF6, 1, "gpio-keys: BTN1"}, - {BTN_2, GPIO_PF7, 1, "gpio-keys: BTN2"}, - {BTN_3, GPIO_PF8, 1, "gpio-keys: BTN3"}, -}; - -static struct gpio_keys_platform_data bfin_gpio_keys_data = { - .buttons = bfin_gpio_keys_table, - .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), -}; - -static struct platform_device bfin_device_gpiokeys = { - .name = "gpio-keys", - .dev = { - .platform_data = &bfin_gpio_keys_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_I2C_GPIO) -#include <linux/i2c-gpio.h> - -static struct gpiod_lookup_table bfin_i2c_gpiod_table = { - .dev_id = "i2c-gpio", - .table = { - GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF1, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF0, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct i2c_gpio_platform_data i2c_gpio_data = { - .udelay = 10, -}; - -static struct platform_device i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = &i2c_gpio_data, - }, -}; -#endif - -static const unsigned int cclk_vlev_datasheet[] = -{ - VRPAIR(VLEV_085, 250000000), - VRPAIR(VLEV_090, 300000000), - VRPAIR(VLEV_095, 313000000), - VRPAIR(VLEV_100, 350000000), - VRPAIR(VLEV_105, 400000000), - VRPAIR(VLEV_110, 444000000), - VRPAIR(VLEV_115, 450000000), - VRPAIR(VLEV_120, 475000000), - VRPAIR(VLEV_125, 500000000), - VRPAIR(VLEV_130, 600000000), -}; - -static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { - .tuple_tab = cclk_vlev_datasheet, - .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), - .vr_settling_time = 25 /* us */, -}; - -static struct platform_device bfin_dpmc = { - .name = "bfin dpmc", - .dev = { - .platform_data = &bfin_dmpc_vreg_data, - }, -}; - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) -#include <linux/videodev2.h> -#include <media/blackfin/bfin_capture.h> -#include <media/blackfin/ppi.h> - -static const unsigned short ppi_req[] = { - P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, - P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, - P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, - 0, -}; - -static const struct ppi_info ppi_info = { - .type = PPI_TYPE_PPI, - .dma_ch = CH_PPI0, - .irq_err = IRQ_PPI1_ERROR, - .base = (void __iomem *)PPI0_CONTROL, - .pin_req = ppi_req, -}; - -#if IS_ENABLED(CONFIG_VIDEO_ADV7183) -#include <media/i2c/adv7183.h> -static struct v4l2_input adv7183_inputs[] = { - { - .index = 0, - .name = "Composite", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, - { - .index = 1, - .name = "S-Video", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, - { - .index = 2, - .name = "Component", - .type = V4L2_INPUT_TYPE_CAMERA, - .std = V4L2_STD_ALL, - .capabilities = V4L2_IN_CAP_STD, - }, -}; - -static struct bcap_route adv7183_routes[] = { - { - .input = ADV7183_COMPOSITE4, - .output = ADV7183_8BIT_OUT, - }, - { - .input = ADV7183_SVIDEO0, - .output = ADV7183_8BIT_OUT, - }, - { - .input = ADV7183_COMPONENT0, - .output = ADV7183_8BIT_OUT, - }, -}; - - -static const unsigned adv7183_gpio[] = { - GPIO_PF13, /* reset pin */ - GPIO_PF2, /* output enable pin */ -}; - -static struct bfin_capture_config bfin_capture_data = { - .card_name = "BF561", - .inputs = adv7183_inputs, - .num_inputs = ARRAY_SIZE(adv7183_inputs), - .routes = adv7183_routes, - .i2c_adapter_id = 0, - .board_info = { - .type = "adv7183", - .addr = 0x20, - .platform_data = (void *)adv7183_gpio, - }, - .ppi_info = &ppi_info, - .ppi_control = (PACK_EN | DLEN_8 | DMA32 | FLD_SEL), -}; -#endif - -static struct platform_device bfin_capture_device = { - .name = "bfin_capture", - .dev = { - .platform_data = &bfin_capture_data, - }, -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) -static struct platform_device bfin_i2s = { - .name = "bfin-i2s", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) -static struct platform_device bfin_ac97 = { - .name = "bfin-ac97", - .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ -}; -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) -static const char * const ad1836_link[] = { - "bfin-i2s.0", - "spi0.4", -}; -static struct platform_device bfin_ad1836_machine = { - .name = "bfin-snd-ad1836", - .id = -1, - .dev = { - .platform_data = (void *)ad1836_link, - }, -}; -#endif - -static struct platform_device *ezkit_devices[] __initdata = { - - &bfin_dpmc, - -#if IS_ENABLED(CONFIG_SMC91X) - &smc91x_device, -#endif - -#if IS_ENABLED(CONFIG_USB_NET2272) - &net2272_bfin_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1760_HCD) - &bfin_isp1760_device, -#endif - -#if IS_ENABLED(CONFIG_SPI_BFIN5XX) - &bfin_spi0_device, -#endif - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_KEYBOARD_GPIO) - &bfin_device_gpiokeys, -#endif - -#if IS_ENABLED(CONFIG_I2C_GPIO) - &i2c_gpio_device, -#endif - -#if IS_ENABLED(CONFIG_USB_ISP1362_HCD) - &isp1362_hcd_device, -#endif - -#if IS_ENABLED(CONFIG_MTD_PHYSMAP) - &ezkit_flash_device, -#endif - -#if IS_ENABLED(CONFIG_VIDEO_BLACKFIN_CAPTURE) - &bfin_capture_device, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) - &bfin_i2s, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_AC97) - &bfin_ac97, -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836) - &bfin_ad1836_machine, -#endif -}; - -static int __init net2272_init(void) -{ -#if IS_ENABLED(CONFIG_USB_NET2272) - int ret; - - ret = gpio_request(GPIO_PF11, "net2272"); - if (ret) - return ret; - - /* Reset the USB chip */ - gpio_direction_output(GPIO_PF11, 0); - mdelay(2); - gpio_set_value(GPIO_PF11, 1); -#endif - - return 0; -} - -static int __init ezkit_init(void) -{ - int ret; - - printk(KERN_INFO "%s(): registering device resources\n", __func__); - -#if IS_ENABLED(CONFIG_I2C_GPIO) - gpiod_add_lookup_table(&bfin_i2c_gpiod_table); -#endif - ret = platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); - if (ret < 0) - return ret; - -#if IS_ENABLED(CONFIG_SMC91X) - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 12)); - SSYNC(); -#endif - -#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X) - bfin_write_FIO0_DIR(bfin_read_FIO0_DIR() | (1 << 15)); - bfin_write_FIO0_FLAG_S(1 << 15); - SSYNC(); - /* - * This initialization lasts for approximately 4500 MCLKs. - * MCLK = 12.288MHz - */ - udelay(400); -#endif - - if (net2272_init()) - pr_warning("unable to configure net2272; it probably won't work\n"); - - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - return 0; -} - -arch_initcall(ezkit_init); - -static struct platform_device *ezkit_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(ezkit_early_devices, - ARRAY_SIZE(ezkit_early_devices)); -} diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c deleted file mode 100644 index f87b8cc0cd4c..000000000000 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2004-2007 Analog Devices Inc. - * 2005 National ICT Australia (NICTA) - * Aidan Williams <aidan@nicta.com.au> - * - * Thanks to Jamey Hicks. - * - * Only SMSC91C1111 was registered, may do more later. - * - * Licensed under the GPL-2 - */ - -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/irq.h> - -const char bfin_board_name[] = "Tepla-BF561"; - -/* - * Driver needs to know address, irq and flag pin. - */ -static struct resource smc91x_resources[] = { - { - .start = 0x2C000300, - .end = 0x2C000320, - .flags = IORESOURCE_MEM, - }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF7, - .end = IRQ_PF7, - .flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 -static struct resource bfin_uart0_resources[] = { - { - .start = BFIN_UART_THR, - .end = BFIN_UART_GCTL+2, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART_TX, - .end = IRQ_UART_TX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_RX, - .end = IRQ_UART_RX, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_UART_ERROR, - .end = IRQ_UART_ERROR, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART_TX, - .end = CH_UART_TX, - .flags = IORESOURCE_DMA, - }, - { - .start = CH_UART_RX, - .end = CH_UART_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static unsigned short bfin_uart0_peripherals[] = { - P_UART0_TX, P_UART0_RX, 0 -}; - -static struct platform_device bfin_uart0_device = { - .name = "bfin-uart", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_uart0_resources), - .resource = bfin_uart0_resources, - .dev = { - .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ - }, -}; -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 -static struct resource bfin_sir0_resources[] = { - { - .start = 0xFFC00400, - .end = 0xFFC004FF, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_UART0_RX, - .end = IRQ_UART0_RX+1, - .flags = IORESOURCE_IRQ, - }, - { - .start = CH_UART0_RX, - .end = CH_UART0_RX+1, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device bfin_sir0_device = { - .name = "bfin_sir", - .id = 0, - .num_resources = ARRAY_SIZE(bfin_sir0_resources), - .resource = bfin_sir0_resources, -}; -#endif -#endif - -static struct platform_device *tepla_devices[] __initdata = { - &smc91x_device, - -#if IS_ENABLED(CONFIG_SERIAL_BFIN) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif - -#if IS_ENABLED(CONFIG_BFIN_SIR) -#ifdef CONFIG_BFIN_SIR0 - &bfin_sir0_device, -#endif -#endif -}; - -static int __init tepla_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", __func__); - return platform_add_devices(tepla_devices, ARRAY_SIZE(tepla_devices)); -} - -arch_initcall(tepla_init); - -static struct platform_device *tepla_early_devices[] __initdata = { -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -#ifdef CONFIG_SERIAL_BFIN_UART0 - &bfin_uart0_device, -#endif -#endif -}; - -void __init native_machine_early_platform_add_devices(void) -{ - printk(KERN_INFO "register early platform devices\n"); - early_platform_add_devices(tepla_early_devices, - ARRAY_SIZE(tepla_early_devices)); -} |