diff options
Diffstat (limited to 'arch/blackfin/mach-bf548/include/mach/defBF54x_base.h')
| -rw-r--r-- | arch/blackfin/mach-bf548/include/mach/defBF54x_base.h | 321 |
1 files changed, 3 insertions, 318 deletions
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h index 78f91103f175..0867c2bedb43 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h @@ -1,5 +1,5 @@ /* - * Copyright 2007-2008 Analog Devices Inc. + * Copyright 2007-2010 Analog Devices Inc. * * Licensed under the ADI BSD license or the GPL-2 (or later) */ @@ -1615,14 +1615,14 @@ #define CTYPE 0x40 /* DMA Channel Type */ #define PMAP 0xf000 /* Peripheral Mapped To This Channel */ -/* Bit masks for DMACx_TCPER */ +/* Bit masks for DMACx_TC_PER */ #define DCB_TRAFFIC_PERIOD 0xf /* DCB Traffic Control Period */ #define DEB_TRAFFIC_PERIOD 0xf0 /* DEB Traffic Control Period */ #define DAB_TRAFFIC_PERIOD 0x700 /* DAB Traffic Control Period */ #define MDMA_ROUND_ROBIN_PERIOD 0xf800 /* MDMA Round Robin Period */ -/* Bit masks for DMACx_TCCNT */ +/* Bit masks for DMACx_TC_CNT */ #define DCB_TRAFFIC_COUNT 0xf /* DCB Traffic Control Count */ #define DEB_TRAFFIC_COUNT 0xf0 /* DEB Traffic Control Count */ @@ -2172,68 +2172,6 @@ #define RCVDATA16 0xffff /* Receive FIFO 16-Bit Data */ -/* Bit masks for UARTx_LCR */ - -#if 0 -/* conflicts with legacy one in last section */ -#define WLS 0x3 /* Word Length Select */ -#endif -#define STB 0x4 /* Stop Bits */ -#define PEN 0x8 /* Parity Enable */ -#define EPS 0x10 /* Even Parity Select */ -#define STP 0x20 /* Sticky Parity */ -#define SB 0x40 /* Set Break */ - -/* Bit masks for UARTx_MCR */ - -#define XOFF 0x1 /* Transmitter Off */ -#define MRTS 0x2 /* Manual Request To Send */ -#define RFIT 0x4 /* Receive FIFO IRQ Threshold */ -#define RFRT 0x8 /* Receive FIFO RTS Threshold */ -#define LOOP_ENA 0x10 /* Loopback Mode Enable */ -#define FCPOL 0x20 /* Flow Control Pin Polarity */ -#define ARTS 0x40 /* Automatic Request To Send */ -#define ACTS 0x80 /* Automatic Clear To Send */ - -/* Bit masks for UARTx_LSR */ - -#define DR 0x1 /* Data Ready */ -#define OE 0x2 /* Overrun Error */ -#define PE 0x4 /* Parity Error */ -#define FE 0x8 /* Framing Error */ -#define BI 0x10 /* Break Interrupt */ -#define THRE 0x20 /* THR Empty */ -#define TEMT 0x40 /* Transmitter Empty */ -#define TFI 0x80 /* Transmission Finished Indicator */ - -/* Bit masks for UARTx_MSR */ - -#define SCTS 0x1 /* Sticky CTS */ -#define CTS 0x10 /* Clear To Send */ -#define RFCS 0x20 /* Receive FIFO Count Status */ - -/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */ - -#define ERBFI 0x1 /* Enable Receive Buffer Full Interrupt */ -#define ETBEI 0x2 /* Enable Transmit Buffer Empty Interrupt */ -#define ELSI 0x4 /* Enable Receive Status Interrupt */ -#define EDSSI 0x8 /* Enable Modem Status Interrupt */ -#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ -#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ - -/* Bit masks for UARTx_GCTL */ - -#define UCEN 0x1 /* UART Enable */ -#define IREN 0x2 /* IrDA Mode Enable */ -#define TPOLC 0x4 /* IrDA TX Polarity Change */ -#define RPOLC 0x8 /* IrDA RX Polarity Change */ -#define FPE 0x10 /* Force Parity Error */ -#define FFE 0x20 /* Force Framing Error */ -#define EDBO 0x40 /* Enable Divide-by-One */ -#define EGLSI 0x80 /* Enable Global LS Interrupt */ - - /* ******************************************* */ /* MULTI BIT MACRO ENUMERATIONS */ /* ******************************************* */ @@ -2251,13 +2189,6 @@ #define WDTH_CAP 0x0002 #define EXT_CLK 0x0003 -/* UARTx_LCR bit field options */ - -#define WLS_5 0x0000 /* 5 data bits */ -#define WLS_6 0x0001 /* 6 data bits */ -#define WLS_7 0x0002 /* 7 data bits */ -#define WLS_8 0x0003 /* 8 data bits */ - /* PINTx Register Bit Definitions */ #define PIQ0 0x00000001 @@ -2300,240 +2231,6 @@ #define PIQ30 0x40000000 #define PIQ31 0x80000000 -/* PORT A Bit Definitions for the registers -PORTA, PORTA_SET, PORTA_CLEAR, -PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN, -PORTA_FER registers -*/ - -#define PA0 0x0001 -#define PA1 0x0002 -#define PA2 0x0004 -#define PA3 0x0008 -#define PA4 0x0010 -#define PA5 0x0020 -#define PA6 0x0040 -#define PA7 0x0080 -#define PA8 0x0100 -#define PA9 0x0200 -#define PA10 0x0400 -#define PA11 0x0800 -#define PA12 0x1000 -#define PA13 0x2000 -#define PA14 0x4000 -#define PA15 0x8000 - -/* PORT B Bit Definitions for the registers -PORTB, PORTB_SET, PORTB_CLEAR, -PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN, -PORTB_FER registers -*/ - -#define PB0 0x0001 -#define PB1 0x0002 -#define PB2 0x0004 -#define PB3 0x0008 -#define PB4 0x0010 -#define PB5 0x0020 -#define PB6 0x0040 -#define PB7 0x0080 -#define PB8 0x0100 -#define PB9 0x0200 -#define PB10 0x0400 -#define PB11 0x0800 -#define PB12 0x1000 -#define PB13 0x2000 -#define PB14 0x4000 - - -/* PORT C Bit Definitions for the registers -PORTC, PORTC_SET, PORTC_CLEAR, -PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN, -PORTC_FER registers -*/ - - -#define PC0 0x0001 -#define PC1 0x0002 -#define PC2 0x0004 -#define PC3 0x0008 -#define PC4 0x0010 -#define PC5 0x0020 -#define PC6 0x0040 -#define PC7 0x0080 -#define PC8 0x0100 -#define PC9 0x0200 -#define PC10 0x0400 -#define PC11 0x0800 -#define PC12 0x1000 -#define PC13 0x2000 - - -/* PORT D Bit Definitions for the registers -PORTD, PORTD_SET, PORTD_CLEAR, -PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN, -PORTD_FER registers -*/ - -#define PD0 0x0001 -#define PD1 0x0002 -#define PD2 0x0004 -#define PD3 0x0008 -#define PD4 0x0010 -#define PD5 0x0020 -#define PD6 0x0040 -#define PD7 0x0080 -#define PD8 0x0100 -#define PD9 0x0200 -#define PD10 0x0400 -#define PD11 0x0800 -#define PD12 0x1000 -#define PD13 0x2000 -#define PD14 0x4000 -#define PD15 0x8000 - -/* PORT E Bit Definitions for the registers -PORTE, PORTE_SET, PORTE_CLEAR, -PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN, -PORTE_FER registers -*/ - - -#define PE0 0x0001 -#define PE1 0x0002 -#define PE2 0x0004 -#define PE3 0x0008 -#define PE4 0x0010 -#define PE5 0x0020 -#define PE6 0x0040 -#define PE7 0x0080 -#define PE8 0x0100 -#define PE9 0x0200 -#define PE10 0x0400 -#define PE11 0x0800 -#define PE12 0x1000 -#define PE13 0x2000 -#define PE14 0x4000 -#define PE15 0x8000 - -/* PORT F Bit Definitions for the registers -PORTF, PORTF_SET, PORTF_CLEAR, -PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN, -PORTF_FER registers -*/ - - -#define PF0 0x0001 -#define PF1 0x0002 -#define PF2 0x0004 -#define PF3 0x0008 -#define PF4 0x0010 -#define PF5 0x0020 -#define PF6 0x0040 -#define PF7 0x0080 -#define PF8 0x0100 -#define PF9 0x0200 -#define PF10 0x0400 -#define PF11 0x0800 -#define PF12 0x1000 -#define PF13 0x2000 -#define PF14 0x4000 -#define PF15 0x8000 - -/* PORT G Bit Definitions for the registers -PORTG, PORTG_SET, PORTG_CLEAR, -PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN, -PORTG_FER registers -*/ - - -#define PG0 0x0001 -#define PG1 0x0002 -#define PG2 0x0004 -#define PG3 0x0008 -#define PG4 0x0010 -#define PG5 0x0020 -#define PG6 0x0040 -#define PG7 0x0080 -#define PG8 0x0100 -#define PG9 0x0200 -#define PG10 0x0400 -#define PG11 0x0800 -#define PG12 0x1000 -#define PG13 0x2000 -#define PG14 0x4000 -#define PG15 0x8000 - -/* PORT H Bit Definitions for the registers -PORTH, PORTH_SET, PORTH_CLEAR, -PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN, -PORTH_FER registers -*/ - - -#define PH0 0x0001 -#define PH1 0x0002 -#define PH2 0x0004 -#define PH3 0x0008 -#define PH4 0x0010 -#define PH5 0x0020 -#define PH6 0x0040 -#define PH7 0x0080 -#define PH8 0x0100 -#define PH9 0x0200 -#define PH10 0x0400 -#define PH11 0x0800 -#define PH12 0x1000 -#define PH13 0x2000 - - -/* PORT I Bit Definitions for the registers -PORTI, PORTI_SET, PORTI_CLEAR, -PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN, -PORTI_FER registers -*/ - - -#define PI0 0x0001 -#define PI1 0x0002 -#define PI2 0x0004 -#define PI3 0x0008 -#define PI4 0x0010 -#define PI5 0x0020 -#define PI6 0x0040 -#define PI7 0x0080 -#define PI8 0x0100 -#define PI9 0x0200 -#define PI10 0x0400 -#define PI11 0x0800 -#define PI12 0x1000 -#define PI13 0x2000 -#define PI14 0x4000 -#define PI15 0x8000 - -/* PORT J Bit Definitions for the registers -PORTJ, PORTJ_SET, PORTJ_CLEAR, -PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN, -PORTJ_FER registers -*/ - - -#define PJ0 0x0001 -#define PJ1 0x0002 -#define PJ2 0x0004 -#define PJ3 0x0008 -#define PJ4 0x0010 -#define PJ5 0x0020 -#define PJ6 0x0040 -#define PJ7 0x0080 -#define PJ8 0x0100 -#define PJ9 0x0200 -#define PJ10 0x0400 -#define PJ11 0x0800 -#define PJ12 0x1000 -#define PJ13 0x2000 - - /* Port Muxing Bit Fields for PORTx_MUX Registers */ #define MUX0 0x00000003 @@ -2703,16 +2400,4 @@ PORTJ_FER registers #define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */ #define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */ - -/* for legacy compatibility */ - -#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ -#define W1LMAX_MAX W1LMAX_MIN -#define EBIU_AMCBCTL0 EBIU_AMBCTL0 -#define EBIU_AMCBCTL1 EBIU_AMBCTL1 -#define PINT0_IRQ PINT0_REQUEST -#define PINT1_IRQ PINT1_REQUEST -#define PINT2_IRQ PINT2_REQUEST -#define PINT3_IRQ PINT3_REQUEST - #endif /* _DEF_BF54X_H */ |