1 files changed, 133 insertions, 0 deletions
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
new file mode 100644
index 000000000000..74f8c9f2f03d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -0,0 +1,133 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+
+#include "intc.h"
+
+struct intc {
+	void __iomem	*regs;
+	struct irq_chip	chip;
+};
+
+extern struct platform_device at32_intc0_device;
+
+/*
+ * TODO: We may be able to implement mask/unmask by setting IxM flags
+ * in the status register.
+ */
+static void intc_mask_irq(unsigned int irq)
+{
+
+}
+
+static void intc_unmask_irq(unsigned int irq)
+{
+
+}
+
+static struct intc intc0 = {
+	.chip = {
+		.name		= "intc",
+		.mask		= intc_mask_irq,
+		.unmask		= intc_unmask_irq,
+	},
+};
+
+/*
+ * All interrupts go via intc at some point.
+ */
+asmlinkage void do_IRQ(int level, struct pt_regs *regs)
+{
+	struct irq_desc *desc;
+	unsigned int irq;
+	unsigned long status_reg;
+
+	local_irq_disable();
+
+	irq_enter();
+
+	irq = intc_readl(&intc0, INTCAUSE0 - 4 * level);
+	desc = irq_desc + irq;
+	desc->handle_irq(irq, desc, regs);
+
+	/*
+	 * Clear all interrupt level masks so that we may handle
+	 * interrupts during softirq processing.  If this is a nested
+	 * interrupt, interrupts must stay globally disabled until we
+	 * return.
+	 */
+	status_reg = sysreg_read(SR);
+	status_reg &= ~(SYSREG_BIT(I0M) | SYSREG_BIT(I1M)
+			| SYSREG_BIT(I2M) | SYSREG_BIT(I3M));
+	sysreg_write(SR, status_reg);
+
+	irq_exit();
+}
+
+void __init init_IRQ(void)
+{
+	extern void _evba(void);
+	extern void irq_level0(void);
+	struct resource *regs;
+	struct clk *pclk;
+	unsigned int i;
+	u32 offset, readback;
+
+	regs = platform_get_resource(&at32_intc0_device, IORESOURCE_MEM, 0);
+	if (!regs) {
+		printk(KERN_EMERG "intc: no mmio resource defined\n");
+		goto fail;
+	}
+	pclk = clk_get(&at32_intc0_device.dev, "pclk");
+	if (IS_ERR(pclk)) {
+		printk(KERN_EMERG "intc: no clock defined\n");
+		goto fail;
+	}
+
+	clk_enable(pclk);
+
+	intc0.regs = ioremap(regs->start, regs->end - regs->start + 1);
+	if (!intc0.regs) {
+		printk(KERN_EMERG "intc: failed to map registers (0x%08lx)\n",
+		       (unsigned long)regs->start);
+		goto fail;
+	}
+
+	/*
+	 * Initialize all interrupts to level 0 (lowest priority). The
+	 * priority level may be changed by calling
+	 * irq_set_priority().
+	 *
+	 */
+	offset = (unsigned long)&irq_level0 - (unsigned long)&_evba;
+	for (i = 0; i < NR_INTERNAL_IRQS; i++) {
+		intc_writel(&intc0, INTPR0 + 4 * i, offset);
+		readback = intc_readl(&intc0, INTPR0 + 4 * i);
+		if (readback == offset)
+			set_irq_chip_and_handler(i, &intc0.chip,
+						 handle_simple_irq);
+	}
+
+	/* Unmask all interrupt levels */
+	sysreg_write(SR, (sysreg_read(SR)
+			  & ~(SR_I3M | SR_I2M | SR_I1M | SR_I0M)));
+
+	return;
+
+fail:
+	panic("Interrupt controller initialization failed!\n");
+}
+