diff options
Diffstat (limited to 'arch/arm')
348 files changed, 10247 insertions, 4440 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 853aab5ab327..085c830d344b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -33,6 +33,7 @@ config ARM select ARCH_SUPPORTS_ATOMIC_RMW select ARCH_USE_BUILTIN_BSWAP select ARCH_USE_CMPXCHG_LOCKREF + select ARCH_USE_MEMTEST select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU select ARCH_WANT_IPC_PARSE_VERSION select ARCH_WANT_LD_ORPHAN_WARN @@ -348,6 +349,7 @@ config ARCH_EP93XX select ARM_AMBA imply ARM_PATCH_PHYS_VIRT select ARM_VIC + select GENERIC_IRQ_MULTI_HANDLER select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO @@ -1292,9 +1294,15 @@ config KASAN_SHADOW_OFFSET config NR_CPUS int "Maximum number of CPUs (2-32)" - range 2 32 + range 2 16 if DEBUG_KMAP_LOCAL + range 2 32 if !DEBUG_KMAP_LOCAL depends on SMP default "4" + help + The maximum number of CPUs that the kernel can support. + Up to 32 CPUs can be supported, or up to 16 if kmap_local() + debugging is enabled, which uses half of the per-CPU fixmap + slots as guard regions. config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" @@ -1320,7 +1328,7 @@ config ARM_PSCI # selected platforms. config ARCH_NR_GPIO int - default 2048 if ARCH_SOCFPGA + default 2048 if ARCH_INTEL_SOCFPGA default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \ ARCH_ZYNQ || ARCH_ASPEED default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9e0b5e7f12af..36016497b1b3 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1087,7 +1087,7 @@ choice on SD5203 UART. config DEBUG_SOCFPGA_UART0 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA UART0 for low-level debug" select DEBUG_UART_8250 help @@ -1095,7 +1095,7 @@ choice on SOCFPGA(Cyclone 5 and Arria 5) based platforms. config DEBUG_SOCFPGA_ARRIA10_UART1 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA Arria10 UART1 for low-level debug" select DEBUG_UART_8250 help @@ -1103,7 +1103,7 @@ choice on SOCFPGA(Arria 10) based platforms. config DEBUG_SOCFPGA_CYCLONE5_UART1 - depends on ARCH_SOCFPGA + depends on ARCH_INTEL_SOCFPGA bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug" select DEBUG_UART_8250 help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index dad5502ecc28..415c3514573a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -209,7 +209,7 @@ machine-$(CONFIG_PLAT_SAMSUNG) += s3c machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_RENESAS) += shmobile -machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 8e5d4ab4e75e..f8f09c5066e7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -333,8 +333,11 @@ dtb-$(CONFIG_ARCH_LPC18XX) += \ dtb-$(CONFIG_ARCH_LPC32XX) += \ lpc3250-ea3250.dtb \ lpc3250-phy3250.dtb +dtb-$(CONFIG_ARCH_WPCM450) += \ + nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb dtb-$(CONFIG_ARCH_NPCM7XX) += \ nuvoton-npcm730-gsj.dtb \ + nuvoton-npcm730-gbs.dtb \ nuvoton-npcm730-kudo.dtb \ nuvoton-npcm750-evb.dtb \ nuvoton-npcm750-runbmc-olympus.dtb @@ -660,6 +663,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-pico-hobbit.dtb \ imx7d-pico-nymph.dtb \ imx7d-pico-pi.dtb \ + imx7d-remarkable2.dtb \ imx7d-sbc-imx7.dtb \ imx7d-sdb.dtb \ imx7d-sdb-reva.dtb \ @@ -929,7 +933,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974-sony-xperia-castor.dtb \ qcom-msm8974-sony-xperia-honami.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ - qcom-sdx55-mtp.dtb + qcom-sdx55-mtp.dtb \ + qcom-sdx55-t55.dtb \ + qcom-sdx55-telit-fn980-tlb.dtb dtb-$(CONFIG_ARCH_RDA) += \ rda8810pl-orangepi-2g-iot.dtb \ rda8810pl-orangepi-i96.dtb @@ -1033,7 +1039,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ s5pv210-smdkc110.dtb \ s5pv210-smdkv210.dtb \ s5pv210-torbreck.dtb -dtb-$(CONFIG_ARCH_SOCFPGA) += \ +dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ socfpga_arria10_socdk_nand.dtb \ socfpga_arria10_socdk_qspi.dtb \ @@ -1071,11 +1077,16 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32746g-eval.dtb \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ + stm32h750i-art-pi.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp157a-avenger96.dtb \ stm32mp157a-dhcor-avenger96.dtb \ stm32mp157a-dk1.dtb \ stm32mp157a-iot-box.dtb \ + stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \ + stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \ + stm32mp157a-icore-stm32mp1-ctouch2.dtb \ + stm32mp157a-icore-stm32mp1-edimm2.2.dtb \ stm32mp157a-stinger96.dtb \ stm32mp157c-dhcom-pdk2.dtb \ stm32mp157c-dhcom-picoitx.dtb \ @@ -1105,7 +1116,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb \ sun4i-a10-pcduino2.dtb \ - sun4i-a10-pov-protab2-ips9.dtb + sun4i-a10-pov-protab2-ips9.dtb \ + sun4i-a10-topwise-a721.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ @@ -1337,6 +1349,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-382-rd-ac3x-48g4x2xl.dtb \ + armada-385-atl-x530.dtb\ armada-385-clearfog-gtr-s4.dtb \ armada-385-clearfog-gtr-l8.dtb \ armada-385-db-88f6820-amc.dtb \ @@ -1397,6 +1410,7 @@ dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb dtb-$(CONFIG_ARCH_MSTARV7) += \ mstar-infinity-msc313-breadbee_crust.dtb \ mstar-infinity2m-ssd202d-ssd201htv2.dtb \ + mstar-infinity2m-ssd202d-unitv2.dtb \ mstar-infinity3-msc313e-breadbee.dtb \ mstar-mercury5-ssc8336n-midrived08.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ @@ -1406,6 +1420,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-ampere-mtjade.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ aspeed-bmc-arm-stardragon4800-rep2.dtb \ + aspeed-bmc-asrock-e3c246d4i.dtb \ aspeed-bmc-bytedance-g220a.dtb \ aspeed-bmc-facebook-cmm.dtb \ aspeed-bmc-facebook-galaxy100.dtb \ @@ -1418,6 +1433,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-yosemitev2.dtb \ aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ + aspeed-bmc-ibm-rainier-1s4u.dtb \ aspeed-bmc-ibm-rainier-4u.dtb \ aspeed-bmc-intel-s2600wf.dtb \ aspeed-bmc-inspur-fp5280g2.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index b4feb85e171a..e2ee8b8c07bc 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -26,54 +26,54 @@ &gpio0 { gpio-line-names = - "[ethernet]", - "[ethernet]", + "[mdio_data]", + "[mdio_clk]", "P9_22 [spi0_sclk]", "P9_21 [spi0_d0]", "P9_18 [spi0_d1]", "P9_17 [spi0_cs0]", - "[sd card]", - "P9_42A [ecappwm0]", - "P8_35 [hdmi]", - "P8_33 [hdmi]", - "P8_31 [hdmi]", - "P8_32 [hdmi]", + "[mmc0_cd]", + "P8_42A [ecappwm0]", + "P8_35 [lcd d12]", + "P8_33 [lcd d13]", + "P8_31 [lcd d14]", + "P8_32 [lcd d15]", "P9_20 [i2c2_sda]", "P9_19 [i2c2_scl]", "P9_26 [uart1_rxd]", "P9_24 [uart1_txd]", - "[ethernet]", - "[ethernet]", - "[usb]", - "[hdmi]", + "[rmii1_txd3]", + "[rmii1_txd2]", + "[usb0_drvvbus]", + "[hdmi cec]", "P9_41B", - "[ethernet]", + "[rmii1_txd1]", "P8_19 [ehrpwm2a]", "P8_13 [ehrpwm2b]", - "[NC]", - "[NC]", + "NC", + "NC", "P8_14", "P8_17", - "[ethernet]", - "[ethernet]", + "[rmii1_txd0]", + "[rmii1_refclk]", "P9_11 [uart4_rxd]", "P9_13 [uart4_txd]"; }; &gpio1 { gpio-line-names = - "P8_25 [emmc]", - "[emmc]", - "P8_5 [emmc]", - "P8_6 [emmc]", - "P8_23 [emmc]", - "P8_22 [emmc]", - "P8_3 [emmc]", - "P8_4 [emmc]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "P8_25 [mmc1_dat0]", + "[mmc1_dat1]", + "P8_5 [mmc1_dat2]", + "P8_6 [mmc1_dat3]", + "P8_23 [mmc1_dat4]", + "P8_22 [mmc1_dat5]", + "P8_3 [mmc1_dat6]", + "P8_4 [mmc1_dat7]", + "NC", + "NC", + "NC", + "NC", "P8_12", "P8_11", "P8_16", @@ -82,13 +82,13 @@ "P9_23", "P9_14 [ehrpwm1a]", "P9_16 [ehrpwm1b]", - "[emmc]", + "[emmc rst]", "[usr0 led]", "[usr1 led]", "[usr2 led]", "[usr3 led]", - "[hdmi]", - "[usb]", + "[hdmi irq]", + "[usb vbus oc]", "[hdmi audio]", "P9_12", "P8_26", @@ -116,38 +116,38 @@ "P8_38 [hdmi]", "P8_36 [hdmi]", "P8_34 [hdmi]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", + "[rmii1_rxd3]", + "[rmii1_rxd2]", + "[rmii1_rxd1]", + "[rmii1_rxd0]", "P8_27 [hdmi]", "P8_29 [hdmi]", "P8_28 [hdmi]", "P8_30 [hdmi]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]", - "[emmc]"; + "[mmc0_dat3]", + "[mmc0_dat2]", + "[mmc0_dat1]", + "[mmc0_dat0]", + "[mmc0_clk]", + "[mmc0_cmd]"; }; &gpio3 { gpio-line-names = - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[ethernet]", - "[i2c0]", - "[i2c0]", - "[emu]", - "[emu]", - "[ethernet]", - "[ethernet]", - "[NC]", - "[NC]", - "[usb]", + "[mii col]", + "[mii crs]", + "[mii rx err]", + "[mii tx en]", + "[mii rx dv]", + "[i2c0 sda]", + "[i2c0 scl]", + "[jtag emu0]", + "[jtag emu1]", + "[mii tx clk]", + "[mii rx clk]", + "NC", + "NC", + "[usb vbus en]", "P9_31 [spi1_sclk]", "P9_29 [spi1_d0]", "P9_30 [spi1_d1]", @@ -156,14 +156,14 @@ "P9_27", "P9_41A", "P9_25", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]"; + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; }; diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index d526c5941c9b..209cdd17dc1e 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -61,51 +61,51 @@ &gpio0 { gpio-line-names = - "[NC]", - "[NC]", + "NC", + "NC", "P1.08 [SPI0_CLK]", "P1.10 [SPI0_MISO]", "P1.12 [SPI0_MOSI]", "P1.06 [SPI0_CS]", "[MMC0_CD]", "P2.29 [SPI1_CLK]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", + "[SYSBOOT 12]", + "[SYSBOOT 13]", + "[SYSBOOT 14]", + "[SYSBOOT 15]", "P1.26 [I2C2_SDA]", "P1.28 [I2C2_SCL]", "P2.11 [I2C1_SDA]", "P2.09 [I2C1_SCL]", - "[NC]", - "[NC]", - "[NC]", + "NC", + "NC", + "NC", "P2.31 [SPI1_CS]", "P1.20 [PRU0.16]", - "[NC]", - "[NC]", + "NC", + "NC", "P2.03", - "[NC]", - "[NC]", + "NC", + "NC", "P1.34", "P2.19", - "[NC]", - "[NC]", + "NC", + "NC", "P2.05 [UART4_RX]", "P2.07 [UART4_TX]"; }; &gpio1 { gpio-line-names = - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", "P2.25 [SPI1_MOSI]", "P1.32 [UART0_RX]", "P1.30 [UART0_TX]", @@ -113,10 +113,10 @@ "P2.33", "P2.22", "P2.18", - "[NC]", - "[NC]", + "NC", + "NC", "P2.01 [PWM1A]", - "[NC]", + "NC", "P2.10", "[USR LED 0]", "[USR LED 1]", @@ -126,35 +126,35 @@ "P2.04", "P2.02", "P2.08", - "[NC]", - "[NC]", - "[NC]"; + "NC", + "NC", + "NC"; }; &gpio2 { gpio-line-names = "P2.20", "P2.17", - "[NC]", - "[NC]", - "[NC]", + "NC", + "NC", + "NC", "[EEPROM_WP]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[SYSBOOT]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "[SYSBOOT 0]", + "[SYSBOOT 1]", + "[SYSBOOT 2]", + "[SYSBOOT 3]", + "[SYSBOOT 4]", + "[SYSBOOT 5]", + "[SYSBOOT 6]", + "[SYSBOOT 7]", + "[SYSBOOT 8]", + "[SYSBOOT 9]", + "[SYSBOOT 10]", + "[SYSBOOT 11]", + "NC", + "NC", + "NC", + "NC", "P2.35 [AIN5]", "P1.02 [AIN6]", "P1.35 [PRU1.10]", @@ -169,19 +169,19 @@ &gpio3 { gpio-line-names = - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "NC", + "NC", + "NC", + "NC", + "NC", "[I2C0_SDA]", "[I2C0_SCL]", - "[JTAG]", - "[JTAG]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", + "[JTAG EMU0]", + "[JTAG EMU1]", + "NC", + "NC", + "NC", + "NC", "P1.03 [USB1]", "P1.36 [PWM0A]", "P1.33 [PRU0.1]", @@ -191,16 +191,16 @@ "P2.34 [PRU0.5]", "P2.28 [PRU0.6]", "P1.29 [PRU0.7]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]", - "[NC]"; + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; }; &am33xx_pinmux { diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 1fb22088caeb..039a9ab4c7ea 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -259,22 +259,22 @@ ranges = <0x00000000 0x0000d000 0x00001000>, <0x00001000 0x0000e000 0x00001000>; - tscadc: tscadc@0 { - compatible = "ti,am3359-tscadc"; - reg = <0x0 0x1000>; - interrupts = <16>; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <16>; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; - tsc { - compatible = "ti,am3359-tsc"; - }; - am335x_adc: adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; }; + }; }; target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 5b213a1e68bb..5e33d0e88f5b 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -40,6 +40,9 @@ ethernet1 = &cpsw_emac1; spi0 = &spi0; spi1 = &spi1; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; }; cpus { diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts new file mode 100644 index 000000000000..ed3f41c7df71 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-atl-x530.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board. + (x530/AT-GS980MX) + * + Copyright (C) 2020 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "x530/AT-GS980MX"; + compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + i2c0: i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + }; + + uart0: serial@12000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + status = "okay"; + reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + reset-delay-us = <400000>; +}; + +&pcie2 { + status = "okay"; +}; + +&devbus_cs1 { + compatible = "marvell,mvebu-devbus"; + status = "okay"; + + devbus,bus-width = <8>; + devbus,turn-off-ps = <60000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <124000>; + devbus,acc-next-ps = <248000>; + devbus,rd-setup-ps = <0>; + devbus,rd-hold-ps = <0>; + + /* Write parameters */ + devbus,sync-enable = <0>; + devbus,wr-high-ps = <60000>; + devbus,wr-low-ps = <60000>; + devbus,ale-wr-ps = <60000>; + + nvs@0 { + status = "okay"; + + compatible = "mtd-ram"; + reg = <0 0x00080000>; + bank-width = <1>; + label = "nvs"; + }; +}; + +&pinctrl { + i2c0_gpio_pins: i2c-gpio-pins-0 { + marvell,pins = "mpp2", "mpp3"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-1 = <&i2c0_gpio_pins>; + scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + i2c0mux: mux@71 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9544"; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c@0 { /* POE devices MUX */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + adt7476_2e: hwmon@2e { + compatible = "adi,adt7476"; + reg = <0x2e>; + }; + + adt7476_2d: hwmon@2d { + compatible = "adi,adt7476"; + reg = <0x2d>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio@20 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1>; /* Chip select 1 */ + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@u-boot { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@u-boot-env { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + partition@unused { + reg = <0x00140000 0x00e80000>; + label = "unused"; + }; + partition@idprom { + reg = <0x00fc0000 0x00040000>; + label = "idprom"; + }; + }; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + marvell,nand-enable-arbiter; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@user { + reg = <0x00000000 0x0f000000>; + label = "user"; + }; + partition@errlog { + /* Maximum mtdoops size is 8MB, so set to that. */ + reg = <0x0f000000 0x00800000>; + label = "errlog"; + }; + partition@nand-bbt { + reg = <0x0f800000 0x00800000>; + label = "nand-bbt"; + }; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts index 646a06420c77..5bd6a66d2c2b 100644 --- a/arch/arm/boot/dts/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts @@ -32,7 +32,8 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { @@ -389,6 +390,7 @@ phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; + marvell,reg-init = <3 18 0 0x4985>; /* irq is connected to &pcawan pin 7 */ }; diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts index ac2d04cfaf2f..6aeb47c44eba 100644 --- a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts @@ -151,6 +151,31 @@ status = "okay"; }; +//FPGA +&i2c2 { + status = "okay"; +}; + +//24LC128 EEPROM +&i2c3 { + status = "okay"; +}; + +//P0 Power regulators +&i2c4 { + status = "okay"; +}; + +//P1 Power regulators +&i2c5 { + status = "okay"; +}; + +//P0/P1 Thermal diode +&i2c6 { + status = "okay"; +}; + // Thermal Sensors &i2c7 { status = "okay"; @@ -196,6 +221,11 @@ }; }; +//BMC I2C +&i2c8 { + status = "okay"; +}; + &kcs1 { status = "okay"; aspeed,lpc-io-reg = <0x60>; diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts new file mode 100644 index 000000000000..dcab6e78dfa4 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/i2c/i2c.h> + +/{ + model = "ASRock E3C246D4I BMC"; + compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500"; + + aliases { + serial4 = &uart5; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + /* BMC_HB_LED_N */ + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + system-fault { + /* SYSTEM_FAULT_LED_N */ + gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + uid-button { + label = "uid-button"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <100000000>; /* 100 MHz */ +#include "openbmc-flash-layout.dtsi" + }; +}; + +&uart5 { + status = "okay"; +}; + +&vuart { + status = "okay"; + aspeed,sirq-active-high; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&i2c1 { + status = "okay"; + + /* thermal sensor, one diode run to a disconnected header */ + w83773g@4c { + compatible = "nuvoton,w83773g"; + reg = <0x4c>; + }; +}; + +&i2c3 { + status = "okay"; + + /* FRU EEPROM */ + eeprom@57 { + compatible = "st,24c128", "atmel,24c128"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&video { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&gpio { + status = "okay"; + gpio-line-names = + /* A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI", + "", "", "", "", + /* B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "", + /* C */ "", "", "", "", "", "", "", "", + /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", + "", "", "", "", + /* E */ "", "", "", "", "", "", "", "", + /* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "", + "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL", + /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", + "BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT", + /* H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N", + "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", + /* I */ "", "", "", "", "", "", "", "", + /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", + "", "", "", "", + /* K */ "", "", "", "", "", "", "", "", + /* L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1", + "BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1", + /* M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "", + "", "", "", "", + /* N */ "", "", "", "", "", "", "", "", + /* O */ "", "", "", "", "", "", "", "", + /* P */ "", "", "", "", "", "", "", "", + /* Q */ "", "", "", "", + "BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N", + "BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N", + /* R */ "", "", "", "", "", "", "", "", + /* S */ "PCHHOT_BMC_N", "", "RSMRST", + "", "", "", "", "", + /* T */ "", "", "", "", "", "", "", "", + /* U */ "", "", "", "", "", "", "", "", + /* V */ "", "", "", "", "", "", "", "", + /* W */ "PS_PWROK", /* dummy always-high signal */ + "", "", "", "", "", "", "", + /* X */ "", "", "", "", "", "", "", "", + /* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "", + /* Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", + "", "", "", "", + /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "", + "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N", + /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", + "", "", "", "", + /* AC */ "LAD0", "LAD1", "LAD2", "LAD3", + "CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST"; + + /* Assert BMC_READY so BIOS doesn't sit around waiting for it */ + bmc-ready { + gpio-hog; + gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc11_default + &pinctrl_adc12_default>; +}; + +&kcs3 { + status = "okay"; + aspeed,lpc-io-reg = <0xca2>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts index cd18641d5c23..7b4b2b126ad8 100644 --- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts +++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts @@ -507,6 +507,11 @@ &i2c7 { status = "okay"; //HSC, AirMax Conn A + adm1278@45 { + compatible = "adm1275"; + reg = <0x45>; + shunt-resistor-micro-ohms = <250>; + }; }; &i2c8 { diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts index 6bd876657bb8..3295c8c7c05c 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts @@ -44,6 +44,58 @@ i2c415 = &cfam3_i2c15; i2c416 = &cfam3_i2c16; i2c417 = &cfam3_i2c17; + i2c500 = &cfam4_i2c0; + i2c501 = &cfam4_i2c1; + i2c510 = &cfam4_i2c10; + i2c511 = &cfam4_i2c11; + i2c512 = &cfam4_i2c12; + i2c513 = &cfam4_i2c13; + i2c514 = &cfam4_i2c14; + i2c515 = &cfam4_i2c15; + i2c602 = &cfam5_i2c2; + i2c603 = &cfam5_i2c3; + i2c610 = &cfam5_i2c10; + i2c611 = &cfam5_i2c11; + i2c614 = &cfam5_i2c14; + i2c615 = &cfam5_i2c15; + i2c616 = &cfam5_i2c16; + i2c617 = &cfam5_i2c17; + i2c700 = &cfam6_i2c0; + i2c701 = &cfam6_i2c1; + i2c710 = &cfam6_i2c10; + i2c711 = &cfam6_i2c11; + i2c712 = &cfam6_i2c12; + i2c713 = &cfam6_i2c13; + i2c714 = &cfam6_i2c14; + i2c715 = &cfam6_i2c15; + i2c802 = &cfam7_i2c2; + i2c803 = &cfam7_i2c3; + i2c810 = &cfam7_i2c10; + i2c811 = &cfam7_i2c11; + i2c814 = &cfam7_i2c14; + i2c815 = &cfam7_i2c15; + i2c816 = &cfam7_i2c16; + i2c817 = &cfam7_i2c17; + + i2c16 = &i2c4mux0chn0; + i2c17 = &i2c4mux0chn1; + i2c18 = &i2c4mux0chn2; + i2c19 = &i2c5mux0chn0; + i2c20 = &i2c5mux0chn1; + i2c21 = &i2c5mux0chn2; + i2c22 = &i2c5mux0chn3; + i2c23 = &i2c6mux0chn0; + i2c24 = &i2c6mux0chn1; + i2c25 = &i2c6mux0chn2; + i2c26 = &i2c6mux0chn3; + i2c27 = &i2c14mux0chn0; + i2c28 = &i2c14mux0chn1; + i2c29 = &i2c14mux0chn2; + i2c30 = &i2c14mux0chn3; + i2c31 = &i2c14mux1chn0; + i2c32 = &i2c14mux1chn1; + i2c33 = &i2c14mux1chn2; + i2c34 = &i2c14mux1chn3; serial4 = &uart5; @@ -63,6 +115,22 @@ spi41 = &cfam3_spi1; spi42 = &cfam3_spi2; spi43 = &cfam3_spi3; + spi50 = &cfam4_spi0; + spi51 = &cfam4_spi1; + spi52 = &cfam4_spi2; + spi53 = &cfam4_spi3; + spi60 = &cfam5_spi0; + spi61 = &cfam5_spi1; + spi62 = &cfam5_spi2; + spi63 = &cfam5_spi3; + spi70 = &cfam6_spi0; + spi71 = &cfam6_spi1; + spi72 = &cfam6_spi2; + spi73 = &cfam6_spi3; + spi80 = &cfam7_spi0; + spi81 = &cfam7_spi1; + spi82 = &cfam7_spi2; + spi83 = &cfam7_spi3; }; chosen { @@ -103,6 +171,889 @@ reg = <0xbf000000 0x01000000>; /* 16M */ }; }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 15 GPIO_ACTIVE_LOW>; + linux,code = <15>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 14 GPIO_ACTIVE_LOW>; + linux,code = <14>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + }; +}; + +&gpio0 { + gpio-line-names = + /*A0-A7*/ "","","","","","","","", + /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "","","","","","","","", + /*E0-E7*/ "","","","","","","","", + /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","", + "PIN_HOLE_RESET_OUT_N","","","","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","","","","I2C_FLASH_MICRO_N","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","BMC_3RESTART_ATTEMPT_P","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "","","","","","","",""; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + pca1: pca9552@62 { + compatible = "nxp,pca9552"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-ps0", + "presence-ps1", + "presence-ps2", + "presence-ps3", + "presence-pdb", + "presence-tpm", + "", "", + "presence-cp0", + "presence-cp1", + "presence-cp2", + "presence-cp3", + "presence-dasd", + "presence-lcd-op", + "presence-base-op", + ""; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@01 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pca2: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card1", + "presence-cable-card2", + "presence-cable-card3", + "presence-cable-card4", + "presence-cable-card5", + "expander-cable-card1", + "expander-cable-card2", + "expander-cable-card3", + "expander-cable-card4", + "expander-cable-card5"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + + pca3: pca9552@62 { + compatible = "nxp,pca9552"; + reg = <0x62>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "presence-cable-card6", + "presence-cable-card7", + "presence-cable-card8", + "presence-cable-card9", + "presence-cable-card10", + "presence-cable-card11", + "expander-cable-card6", + "expander-cable-card7", + "expander-cable-card8", + "expander-cable-card9", + "expander-cable-card10", + "expander-cable-card11"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + eeprom@54 { + compatible = "atmel,24c128"; + reg = <0x54>; + }; + + power-supply@68 { + compatible = "ibm,cffps"; + reg = <0x68>; + }; + + power-supply@69 { + compatible = "ibm,cffps"; + reg = <0x69>; + }; + + power-supply@6a { + compatible = "ibm,cffps"; + reg = <0x6a>; + }; + + power-supply@6b { + compatible = "ibm,cffps"; + reg = <0x6b>; + }; +}; + +&i2c4 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c4mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c4mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c4mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c5mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c5mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c5mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c5mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c6mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c6mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c6mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; + + i2c6mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + ucd90320@11 { + compatible = "ti,ucd90320"; + reg = <0x11>; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c11 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + eeprom@53 { + compatible = "atmel,24c128"; + reg = <0x53>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; +}; + +&i2c14 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c14mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c14mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + }; + + i2c14mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + max31785@52 { + compatible = "maxim,max31785a"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x52>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + }; + }; + + pca0: pca9552@61 { + compatible = "nxp,pca9552"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x61>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "","","","", + "","","","", + "","","","", + "presence-fan3", + "presence-fan2", + "presence-fan1", + "presence-fan0"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + }; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + reg = <0x71>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; + + i2c14mux1chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + + i2c14mux1chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; }; &ehci1 { @@ -133,7 +1084,7 @@ */ cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>; - cfam@0,0 { + cfam@0,0 { /* DCM0_C0 */ reg = <0 0>; #address-cells = <1>; #size-cells = <1>; @@ -277,7 +1228,7 @@ }; &fsi_hub0 { - cfam@1,0 { + cfam@1,0 { /* DCM0_C1 */ reg = <1 0>; #address-cells = <1>; #size-cells = <1>; @@ -421,7 +1372,7 @@ }; }; - cfam@2,0 { + cfam@2,0 { /* DCM1_C0 */ reg = <2 0>; #address-cells = <1>; #size-cells = <1>; @@ -565,7 +1516,7 @@ }; }; - cfam@3,0 { + cfam@3,0 { /* DCM1_C1 */ reg = <3 0>; #address-cells = <1>; #size-cells = <1>; @@ -708,6 +1659,582 @@ no-scan-on-init; }; }; + + cfam@4,0 { /* DCM2_C0 */ + reg = <4 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <4>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam4_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam4_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam4_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam4_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam4_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam4_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam4_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam4_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam4_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam4_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam4_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ4: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub4: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@5,0 { /* DCM2_C1 */ + reg = <5 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <5>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam5_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam5_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam5_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam5_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam5_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam5_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam5_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam5_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam5_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam5_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam5_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ5: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub5: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@6,0 { /* DCM3_C0 */ + reg = <6 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <6>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam6_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam6_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam6_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam6_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam6_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam6_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam6_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam6_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam6_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam6_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam6_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ6: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub6: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; + + cfam@7,0 { /* DCM3_C1 */ + reg = <7 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <7>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam7_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam7_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam7_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam7_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam7_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam7_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam7_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam7_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam7_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam7_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam7_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ7: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub7: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; }; /* Legacy OCC numbering (to get rid of when userspace is fixed) */ @@ -727,6 +2254,22 @@ reg = <4>; }; +&fsi_occ4 { + reg = <5>; +}; + +&fsi_occ5 { + reg = <6>; +}; + +&fsi_occ6 { + reg = <7>; +}; + +&fsi_occ7 { + reg = <8>; +}; + &ibt { status = "okay"; }; @@ -769,6 +2312,20 @@ use-ncsi; }; +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + &xdma { status = "okay"; memory-region = <&vga_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts new file mode 100644 index 000000000000..f5f5b18c113a --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2021 IBM Corp. +/dts-v1/; + +#include "aspeed-bmc-ibm-rainier-4u.dts" + +/ { + model = "Rainier 1S4U"; +}; + +&max { + /delete-node/ fan3; + /delete-node/ fan5; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts index 291f7d6c9979..f7fd3b3c90d0 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts @@ -22,16 +22,30 @@ &fan0 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan1 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan2 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; &fan3 { tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; +}; + +&fan4 { + tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; +}; + +&fan5 { + tach-pulses = <4>; + /delete-property/ maxim,fan-dual-tach; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts index 6c9804d2f3b4..941c0489479a 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts @@ -12,11 +12,55 @@ compatible = "ibm,rainier-bmc", "aspeed,ast2600"; aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c115 = &cfam0_i2c15; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c214 = &cfam1_i2c14; + i2c215 = &cfam1_i2c15; + i2c216 = &cfam1_i2c16; + i2c217 = &cfam1_i2c17; + i2c300 = &cfam2_i2c0; + i2c301 = &cfam2_i2c1; + i2c310 = &cfam2_i2c10; + i2c311 = &cfam2_i2c11; + i2c312 = &cfam2_i2c12; + i2c313 = &cfam2_i2c13; + i2c314 = &cfam2_i2c14; + i2c315 = &cfam2_i2c15; + i2c402 = &cfam3_i2c2; + i2c403 = &cfam3_i2c3; + i2c410 = &cfam3_i2c10; + i2c411 = &cfam3_i2c11; + i2c414 = &cfam3_i2c14; + i2c415 = &cfam3_i2c15; + i2c416 = &cfam3_i2c16; + i2c417 = &cfam3_i2c17; + serial4 = &uart5; i2c16 = &i2c2mux0; i2c17 = &i2c2mux1; i2c18 = &i2c2mux2; i2c19 = &i2c2mux3; + i2c20 = &i2c4mux0chn0; + i2c21 = &i2c4mux0chn1; + i2c22 = &i2c4mux0chn2; + i2c23 = &i2c5mux0chn0; + i2c24 = &i2c5mux0chn1; + i2c25 = &i2c6mux0chn0; + i2c26 = &i2c6mux0chn1; + i2c27 = &i2c6mux0chn2; + i2c28 = &i2c6mux0chn3; + i2c29 = &i2c11mux0chn0; + i2c30 = &i2c11mux0chn1; spi10 = &cfam0_spi0; spi11 = &cfam0_spi1; @@ -30,6 +74,10 @@ spi31 = &cfam2_spi1; spi32 = &cfam2_spi2; spi33 = &cfam2_spi3; + spi40 = &cfam3_spi0; + spi41 = &cfam3_spi1; + spi42 = &cfam3_spi2; + spi43 = &cfam3_spi3; }; chosen { @@ -131,6 +179,73 @@ reg = <3>; }; }; + + leds { + compatible = "gpio-leds"; + + /* BMC Card fault LED at the back */ + bmc-ingraham0 { + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure ID LED at the back */ + rear-enc-id0 { + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; + }; + + /* Enclosure fault LED at the back */ + rear-enc-fault0 { + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + }; + + /* PCIE slot power LED */ + pcieslot-power { + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; + linux,code = <10>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; + linux,code = <11>; + }; + }; }; &ehci1 { @@ -146,7 +261,7 @@ /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","","","","","","", /*G0-G7*/ "","","","","","","","", - /*H0-H7*/ "","","","","","","","", + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", /*I0-I7*/ "","","","","","","","", /*J0-J7*/ "","","","","","","","", /*K0-K7*/ "","","","","","","","", @@ -154,7 +269,7 @@ /*M0-M7*/ "","","","","","","","", /*N0-N7*/ "","","","","","","","", /*O0-O7*/ "","","","usb-power","","","","", - /*P0-P7*/ "","","","","","","","", + /*P0-P7*/ "","","","","pcieslot-power","","","", /*Q0-Q7*/ "cfam-reset","","","","","","","", /*R0-R7*/ "","","","","","","","", /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", @@ -226,6 +341,38 @@ reg = <0x1800 0x400>; #address-cells = <1>; #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; /* OMI01 */ + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; /* OMI23 */ + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam0_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; }; fsi2spi@1c00 { @@ -317,8 +464,6 @@ reg = <0x3400 0x400>; #address-cells = <2>; #size-cells = <0>; - - no-scan-on-init; }; }; }; @@ -340,6 +485,38 @@ reg = <0x1800 0x400>; #address-cells = <1>; #size-cells = <0>; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; /* OMI45 */ + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; /* OMI67 */ + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam1_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam1_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam1_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; }; fsi2spi@1c00 { @@ -452,6 +629,38 @@ reg = <0x1800 0x400>; #address-cells = <1>; #size-cells = <0>; + + cfam2_i2c0: i2c-bus@0 { + reg = <0>; /* OM01 */ + }; + + cfam2_i2c1: i2c-bus@1 { + reg = <1>; /* OM23 */ + }; + + cfam2_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam2_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam2_i2c12: i2c-bus@c { + reg = <12>; /* OP4A */ + }; + + cfam2_i2c13: i2c-bus@d { + reg = <13>; /* OP4B */ + }; + + cfam2_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam2_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; }; fsi2spi@1c00 { @@ -547,6 +756,150 @@ no-scan-on-init; }; }; + + cfam@3,0 { + reg = <3 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <3>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_i2c2: i2c-bus@2 { + reg = <2>; /* OM45 */ + }; + + cfam3_i2c3: i2c-bus@3 { + reg = <3>; /* OM67 */ + }; + + cfam3_i2c10: i2c-bus@a { + reg = <10>; /* OP3A */ + }; + + cfam3_i2c11: i2c-bus@b { + reg = <11>; /* OP3B */ + }; + + cfam3_i2c14: i2c-bus@e { + reg = <14>; /* OP5A */ + }; + + cfam3_i2c15: i2c-bus@f { + reg = <15>; /* OP5B */ + }; + + cfam3_i2c16: i2c-bus@10 { + reg = <16>; /* OP6A */ + }; + + cfam3_i2c17: i2c-bus@11 { + reg = <17>; /* OP6B */ + }; + }; + + fsi2spi@1c00 { + compatible = "ibm,fsi2spi"; + reg = <0x1c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam3_spi0: spi@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi1: spi@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi2: spi@40 { + reg = <0x40>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + + cfam3_spi3: spi@60 { + reg = <0x60>; + compatible = "ibm,fsi2spi-restricted"; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + at25,byte-len = <0x80000>; + at25,addr-mode = <4>; + at25,page-size = <256>; + + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <1000000>; + }; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ3: occ { + compatible = "ibm,p10-occ"; + }; + }; + + fsi_hub3: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; }; /* Legacy OCC numbering (to get rid of when userspace is fixed) */ @@ -562,6 +915,10 @@ reg = <3>; }; +&fsi_occ3 { + reg = <4>; +}; + &ibt { status = "okay"; }; @@ -574,20 +931,64 @@ reg = <0x51>; }; - tca9554@40 { + tca_pres1: tca9554@20{ compatible = "ti,tca9554"; - reg = <0x40>; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; #gpio-cells = <2>; - smbus0-hog { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "smbus0"; + gpio-line-names = "", + "RUSSEL_FW_I2C_ENABLE_N", + "RUSSEL_OPPANEL_PRESENCE_N", + "BLYTH_OPPANEL_PRESENCE_N", + "CPU_TPM_CARD_PRESENT_N", + "DASD_BP2_PRESENT_N", + "DASD_BP1_PRESENT_N", + "DASD_BP0_PRESENT_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; }; - }; + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; &i2c1 { @@ -610,6 +1011,104 @@ compatible = "ibm,cffps"; reg = <0x69>; }; + + pca_pres1: pca9552@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", + "", "", "", "", "", ""; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; }; &i2c4 { @@ -630,19 +1129,46 @@ reg = <0x4a>; }; - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; + i2c4mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; - eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c4mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c4mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; }; }; @@ -659,14 +1185,35 @@ reg = <0x49>; }; - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; + i2c5mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c5mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; }; }; @@ -688,24 +1235,57 @@ reg = <0x4b>; }; - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; - }; + i2c6mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; - eeprom@52 { - compatible = "atmel,24c64"; - reg = <0x52>; - }; + eeprom@53 { + compatible = "atmel,24c64"; + reg = <0x53>; + }; + }; - eeprom@53 { - compatible = "atmel,24c64"; - reg = <0x53>; + i2c6mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + }; + }; + + i2c6mux0chn2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c6mux0chn3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; }; }; @@ -713,9 +1293,9 @@ multi-master; status = "okay"; - si7021-a20@20 { + si7021-a20@40 { compatible = "silabs,si7020"; - reg = <0x20>; + reg = <0x40>; }; tmp275@48 { @@ -723,7 +1303,7 @@ reg = <0x48>; }; - max31785@52 { + max: max31785@52 { compatible = "maxim,max31785a"; reg = <0x52>; #address-cells = <1>; @@ -752,6 +1332,18 @@ reg = <3>; tach-pulses = <2>; }; + + fan4: fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + }; + + fan5: fan@5 { + compatible = "pmbus-fan"; + reg = <5>; + tach-pulses = <2>; + }; }; pca0: pca9552@61 { @@ -899,7 +1491,7 @@ reg = <0x51>; }; - pca1: pca9552@61 { + pca_pres2: pca9552@61 { compatible = "nxp,pca9552"; reg = <0x61>; #address-cells = <1>; @@ -907,6 +1499,15 @@ gpio-controller; #gpio-cells = <2>; + gpio-line-names = + "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD", + "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD", + "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD", + "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N", + "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N", + "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N", + "", "", "", ""; + gpio@0 { reg = <0>; type = <PCA955X_TYPE_GPIO>; @@ -1041,14 +1642,35 @@ reg = <0x49>; }; - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; + pca9546@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + i2c-mux-idle-disconnect; - eeprom@51 { - compatible = "atmel,24c64"; - reg = <0x51>; + i2c11mux0chn0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + i2c11mux0chn1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; }; }; @@ -1140,6 +1762,20 @@ }; }; +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +}; + &xdma { status = "okay"; memory-region = <&vga_memory>; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts index 577c211c469e..15c1f0ac81dc 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts @@ -383,6 +383,39 @@ }; }; +&gpio { + gpio-line-names = + /*A0-A7*/ "","cfam-reset","","","","","","", + /*B0-B7*/ "","","","","","","","", + /*C0-C7*/ "","","","","","","","", + /*D0-D7*/ "fsi-enable","","","","","","","", + /*E0-E7*/ "","","","","","fsi-mux","fsi-clock","fsi-data", + /*F0-F7*/ "","id-button","","","","","air-water","", + /*G0-G7*/ "","","","","","","","", + /*H0-H7*/ "","","","","","","","", + /*I0-I7*/ "","","","","","","","", + /*J0-J7*/ "","","checkstop","","","","","", + /*K0-K7*/ "","","","","","","","", + /*L0-L7*/ "","","","","","","","", + /*M0-M7*/ "","","","","","","","", + /*N0-N7*/ "","","","","","","","", + /*O0-O7*/ "","","","","","","","", + /*P0-P7*/ "","","","","","","","", + /*Q0-Q7*/ "","","","","","","","", + /*R0-R7*/ "","","fsi-trans","","","","","", + /*S0-S7*/ "","","","","","","","", + /*T0-T7*/ "","","","","","","","", + /*U0-U7*/ "","","","","","","","", + /*V0-V7*/ "","","","","","","","", + /*W0-W7*/ "","","","","","","","", + /*X0-X7*/ "","","","","","","","", + /*Y0-Y7*/ "","","","","","","","", + /*Z0-Z7*/ "presence-ps1","","presence-ps0","","","","","", + /*AA0-AA7*/ "led-front-fault","power-button","led-front-id","","","","","", + /*AB0-AB7*/ "","","","","","","","", + /*AC0-AC7*/ "","","","","","","",""; +}; + &fmc { status = "okay"; flash@0 { diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index e7a45ba18fc9..c5aeb3cf3a09 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -343,59 +343,45 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2400-lpc", "simple-mfd"; + compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2400-lpc-bmc"; - reg = <0x0 0x80>; + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2400-lpc-ctrl"; + reg = <0x80 0x10>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2400-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2400-lpc-ctrl"; - reg = <0x0 0x10>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@10 { - compatible = "aspeed,ast2400-lpc-snoop"; - reg = <0x10 0x8>; - interrupts = <8>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2400-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2400-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - ibt: ibt@c0 { - compatible = "aspeed,ast2400-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <8>; - status = "disabled"; - }; + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2400-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lhc: lhc@a0 { + compatible = "aspeed,ast2400-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2400-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@140 { + compatible = "aspeed,ast2400-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <8>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index 21930521a986..d733c1f161c1 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -434,91 +434,74 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2500-lpc", "simple-mfd"; + compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon"; - reg = <0x0 0x80>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x80>; - - kcs1: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - interrupts = <8>; - status = "disabled"; - }; - kcs2: kcs@28 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; - interrupts = <8>; - status = "disabled"; - }; - kcs3: kcs@2c { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; - interrupts = <8>; - status = "disabled"; - }; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; + interrupts = <8>; + status = "disabled"; + }; + + kcs4: kcs@114 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; + interrupts = <8>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - kcs4: kcs@94 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; - interrupts = <8>; - status = "disabled"; - }; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2500-lpc-ctrl"; - reg = <0x0 0x10>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@10 { - compatible = "aspeed,ast2500-lpc-snoop"; - reg = <0x10 0x8>; - interrupts = <8>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2500-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2500-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - - ibt: ibt@c0 { - compatible = "aspeed,ast2500-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <8>; - status = "disabled"; - }; + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2500-lpc-ctrl"; + reg = <0x80 0x10>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2500-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <8>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2500-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + lhc: lhc@a0 { + compatible = "aspeed,ast2500-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + + ibt: ibt@140 { + compatible = "aspeed,ast2500-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <8>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi index 3ee470c2b7b5..f96607b7b4e2 100644 --- a/arch/arm/boot/dts/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed-g6.dtsi @@ -460,91 +460,74 @@ }; lpc: lpc@1e789000 { - compatible = "aspeed,ast2600-lpc", "simple-mfd"; + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; reg = <0x1e789000 0x1000>; + reg-io-width = <4>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x1e789000 0x1000>; - lpc_bmc: lpc-bmc@0 { - compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon"; - reg = <0x0 0x80>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x80>; - - kcs1: kcs@24 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; - interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; - kcs_chan = <1>; - status = "disabled"; - }; - kcs2: kcs@28 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; - interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - kcs3: kcs@2c { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; - interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + kcs1: kcs@24 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + kcs_chan = <1>; + status = "disabled"; + }; + + kcs2: kcs@28 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + kcs3: kcs@2c { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + kcs4: kcs@114 { + compatible = "aspeed,ast2500-kcs-bmc-v2"; + reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; + }; + + lpc_snoop: lpc-snoop@80 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x80 0x80>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + status = "disabled"; }; - lpc_host: lpc-host@80 { - compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon"; - reg = <0x80 0x1e0>; - reg-io-width = <4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80 0x1e0>; - - kcs4: kcs@94 { - compatible = "aspeed,ast2500-kcs-bmc-v2"; - reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>; - interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - lpc_ctrl: lpc-ctrl@0 { - compatible = "aspeed,ast2600-lpc-ctrl"; - reg = <0x0 0x80>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lpc_snoop: lpc-snoop@0 { - compatible = "aspeed,ast2600-lpc-snoop"; - reg = <0x0 0x80>; - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&syscon ASPEED_CLK_GATE_LCLK>; - status = "disabled"; - }; - - lhc: lhc@20 { - compatible = "aspeed,ast2600-lhc"; - reg = <0x20 0x24 0x48 0x8>; - }; - - lpc_reset: reset-controller@18 { - compatible = "aspeed,ast2600-lpc-reset"; - reg = <0x18 0x4>; - #reset-cells = <1>; - }; - - ibt: ibt@c0 { - compatible = "aspeed,ast2600-ibt-bmc"; - reg = <0xc0 0x18>; - interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; + lhc: lhc@a0 { + compatible = "aspeed,ast2600-lhc"; + reg = <0xa0 0x24 0xc8 0x8>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + ibt: ibt@140 { + compatible = "aspeed,ast2600-ibt-bmc"; + reg = <0x140 0x18>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 73b6b1f89de9..edca66c232c1 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "sam9x60.dtsi" +#include <dt-bindings/input/input.h> / { model = "Microchip SAM9X60-EK"; @@ -84,7 +85,7 @@ sw1 { label = "SW1"; gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - linux,code=<0x104>; + linux,code=<KEY_PROG1>; wakeup-source; }; }; @@ -334,14 +335,6 @@ }; &pinctrl { - atmel,mux-mask = < - /* A B C */ - 0xFFFFFE7F 0xC0E0397F 0xEF00019D /* pioA */ - 0x03FFFFFF 0x02FC7E68 0x00780000 /* pioB */ - 0xffffffff 0xF83FFFFF 0xB800F3FC /* pioC */ - 0x003FFFFF 0x003F8000 0x00000000 /* pioD */ - >; - adc { pinctrl_adc_default: adc_default { atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 1b1163858b1d..e3251f3e3eaa 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -84,8 +84,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; - ethernet-phy@0 { - reg = <0x0>; + ethernet-phy@7 { + reg = <0x7>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts index 84e1180f3e89..a9e6fee55a2a 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts @@ -11,6 +11,7 @@ #include "at91-sama5d27_som1.dtsi" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Atmel SAMA5D27 SOM1 EK"; @@ -466,7 +467,7 @@ pb4 { label = "USER"; gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts index 180a08765cb8..ff83967fd008 100644 --- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts @@ -8,6 +8,7 @@ */ /dts-v1/; #include "at91-sama5d27_wlsom1.dtsi" +#include <dt-bindings/input/input.h> / { model = "Microchip SAMA5D27 WLSOM1 EK"; @@ -35,7 +36,7 @@ sw4 { label = "USER BUTTON"; gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts index 46722a163184..bd64721fa23c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_icp.dts +++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts @@ -12,6 +12,7 @@ #include "sama5d2.dtsi" #include "sama5d2-pinfunc.h" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/mfd/atmel-flexcom.h> / { @@ -51,7 +52,7 @@ sw4 { label = "USER_PB1"; gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts index 8de57d164acd..dfd150eb0fd8 100644 --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts @@ -11,6 +11,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/at91.h> / { @@ -402,7 +403,7 @@ bp1 { label = "PB_USER"; gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 4e7cf21f124c..509c732a0d8b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -10,6 +10,7 @@ #include "sama5d2-pinfunc.h" #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/regulator/active-semi,8945a-regulator.h> / { @@ -712,7 +713,7 @@ bp1 { label = "PB_USER"; gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 5179258f9247..9c55a921263b 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -7,6 +7,7 @@ */ /dts-v1/; #include "sama5d36.dtsi" +#include <dt-bindings/input/input.h> / { model = "SAMA5D3 Xplained"; @@ -354,7 +355,7 @@ bp3 { label = "PB_USER"; gpios = <&pioE 29 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts index d3446e42b598..ce96345d28a3 100644 --- a/arch/arm/boot/dts/at91sam9260ek.dts +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -7,6 +7,7 @@ */ /dts-v1/; #include "at91sam9260.dtsi" +#include <dt-bindings/input/input.h> / { model = "Atmel at91sam9260ek"; @@ -156,7 +157,7 @@ btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 6e6e672c0b86..87bb39060e8b 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -5,6 +5,7 @@ * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> */ #include "at91sam9g20.dtsi" +#include <dt-bindings/input/input.h> / { @@ -234,7 +235,7 @@ btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; - linux,code = <0x104>; + linux,code = <KEY_PROG1>; wakeup-source; }; }; diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi index 462b1dfb0385..720beec54d61 100644 --- a/arch/arm/boot/dts/bcm2711.dtsi +++ b/arch/arm/boot/dts/bcm2711.dtsi @@ -308,14 +308,6 @@ #reset-cells = <1>; }; - bsc_intr: interrupt-controller@7ef00040 { - compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; - reg = <0x7ef00040 0x30>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; - }; - aon_intr: interrupt-controller@7ef00100 { compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc"; reg = <0x7ef00100 0x30>; @@ -362,8 +354,6 @@ reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <0>; status = "disabled"; }; @@ -405,8 +395,6 @@ reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>; reg-names = "bsc", "auto-i2c"; clock-frequency = <97500>; - interrupt-parent = <&bsc_intr>; - interrupts = <1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts index 6a96655d8626..8ed403767540 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts index 3b0029e61b4c..667b118ba4ee 100644 --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 90f57bad6b24..ff31ce45831a 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts index 41548d6d479a..5bac1e15775a 100644 --- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts @@ -21,6 +21,11 @@ reg = <0x00000000 0x08000000>; }; + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index fed75e6ab58c..61c7b137607e 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -22,8 +22,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 79542e18915c..4c60eda296d9 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 51c64f0b2560..9ca6d1b2590d 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index c29950b43a95..0e273c598732 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index 2f2d2b0a6893..d857751ec507 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 0e349e39f608..8b1a05a0f1a1 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; spi { diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts index 432254383769..9316a36434f7 100644 --- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts @@ -21,6 +21,11 @@ reg = <0x00000000 0x08000000>; }; + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index 8f1e565c3db4..6c6bb7b17d27 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index ce888b1835d1..d29e7f80ea6a 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts index ed8619b54d69..9b6887d477d8 100644 --- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts @@ -18,8 +18,13 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts index 1f87993eae1d..7989a53597d4 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -21,8 +21,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index 6c6199a53d09..87b655be674c 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -32,8 +32,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index 911c65fbf251..e635a15041dd 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -21,8 +21,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; }; nand: nand@18028000 { diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 3725f2b0d60b..05d4f2931772 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x100000>; }; gpio-keys { @@ -70,6 +75,7 @@ power { label = "bcm53xx:white:power"; gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; }; wifi-disabled { @@ -274,7 +280,7 @@ &nandcs { partitions { - compatible = "fixed-partitions"; + compatible = "linksys,ns-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -295,20 +301,18 @@ }; partition@200000 { - label = "firmware"; - reg = <0x0200000 0x01D00000>; - compatible = "brcm,trx"; + reg = <0x0200000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; }; - partition@1F00000 { - label = "failsafe"; - reg = <0x01F00000 0x01D00000>; - read-only; + partition@1f00000 { + reg = <0x01f00000 0x01d00000>; + compatible = "linksys,ns-firmware", "brcm,trx"; }; partition@5200000 { label = "system"; - reg = <0x05200000 0x02E00000>; + reg = <0x05200000 0x02e00000>; }; }; }; diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts index 50f7cd08cfbb..4b8117f32d26 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts index bcc420f85b56..5fecce0422c7 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts index 4f8d777ae18d..452b8d0ab180 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts @@ -18,8 +18,8 @@ memory { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts index e17e9a17fb00..cbe8c8e4a301 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x08000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x08000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts index 60cc87ecc7ec..24ae3c8a3e09 100644 --- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts @@ -18,8 +18,13 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; + }; + + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts index f42a1703f4ab..42097a4c2659 100644 --- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts @@ -18,8 +18,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; leds { diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts index ac3a4483dcb3..a2566ad4619c 100644 --- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts +++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts @@ -15,8 +15,8 @@ memory@0 { device_type = "memory"; - reg = <0x00000000 0x08000000 - 0x88000000 0x18000000>; + reg = <0x00000000 0x08000000>, + <0x88000000 0x18000000>; }; gpio-keys { diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 3bf90d9e3335..149144cdff35 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,dra7-l4-cfg", "simple-bus"; + compatible = "ti,dra7-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_coreaon>; + clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -11,7 +14,7 @@ <0x00200000 0x4a200000 0x100000>; /* segment 2 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -493,7 +496,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */ @@ -572,11 +575,33 @@ }; target-module@40000 { /* 0x4a140000, ap 31 06.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; target-module@51000 { /* 0x4a151000, ap 33 50.0 */ @@ -789,7 +814,7 @@ }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */ @@ -1006,7 +1031,10 @@ }; &l4_per1 { /* 0x48000000 */ - compatible = "ti,dra7-l4-per1", "simple-bus"; + compatible = "ti,dra7-l4-per1", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1020,7 +1048,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1168,7 +1196,7 @@ }; }; - target-module@34000 { /* 0x48034000, ap 7 46.0 */ + timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; reg = <0x34000 0x4>, <0x34010 0x4>; @@ -1195,7 +1223,7 @@ }; }; - target-module@36000 { /* 0x48036000, ap 9 4e.0 */ + timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; reg = <0x36000 0x4>, <0x36010 0x4>; @@ -2269,14 +2297,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per2 { /* 0x48400000 */ - compatible = "ti,dra7-l4-per2", "simple-bus"; + compatible = "ti,dra7-l4-per2", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48400000 0x800>, <0x48400800 0x800>, <0x48401000 0x400>, @@ -2296,7 +2327,7 @@ <0x48454000 0x48454000 0x400000>; /* L3 data port */ segment@0 { /* 0x48400000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -3094,7 +3125,10 @@ }; &l4_per3 { /* 0x48800000 */ - compatible = "ti,dra7-l4-per3", "simple-bus"; + compatible = "ti,dra7-l4-per3", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48800000 0x800>, <0x48800800 0x800>, <0x48801000 0x400>, @@ -3106,7 +3140,7 @@ ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */ segment@0 { /* 0x48800000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4205,7 +4239,10 @@ }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,dra7-l4-wkup", "simple-bus"; + compatible = "ti,dra7-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -4218,7 +4255,7 @@ <0x00030000 0x4ae30000 0x010000>; /* segment 3 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -4295,7 +4332,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -4405,7 +4442,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -4511,7 +4548,7 @@ }; segment@30000 { /* 0x4ae30000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */ diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ce1194744f84..dfc1ef8ef6ae 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -46,6 +46,7 @@ timer { compatible = "arm,armv7-timer"; + status = "disabled"; /* See ARM architected timer wrap erratum i940 */ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, @@ -125,18 +126,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap5-mpu"; - ti,hwmods = "mpu"; - }; - }; - - /* * XXX: Use a flat representation of the SOC interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -144,16 +133,22 @@ * hierarchy. */ ocp: ocp { - compatible = "ti,dra7-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>, + <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; - ti,hwmods = "l3_main_1", "l3_main_2"; - reg = <0x0 0x44000000 0x0 0x1000000>, - <0x0 0x45000000 0x0 0x1000>; - interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,dra7-l3-noc"; + reg = <0x44000000 0x1000>, + <0x45000000 0x1000>; + interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_cfg: interconnect@4a000000 { }; @@ -161,36 +156,65 @@ }; l4_per1: interconnect@48000000 { }; + + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap5-mpu"; + }; + }; + l4_per2: interconnect@48400000 { }; l4_per3: interconnect@48800000 { }; - axi@0 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi0: target-module@51000000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 0>; + reset-names = "rstctrl"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51000000 0x51000000 0x3000 - 0x0 0x20000000 0x10000000>; + ranges = <0x51000000 0x51000000 0x3000>, + <0x20000000 0x20000000 0x10000000>; dma-ranges; /** * To enable PCI endpoint mode, disable the pcie1_rc * node and enable pcie1_ep mode. */ pcie1_rc: pcie@51000000 { - reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg = <0x51000000 0x2000>, + <0x51002000 0x14c>, + <0x20001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 232 0x4>, <0 233 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>, + <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <0>; - ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-lane-sel = <&scm_conf_pcie 0x18>; @@ -209,13 +233,15 @@ }; pcie1_ep: pcie_ep@51000000 { - reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>; + reg = <0x51000000 0x28>, + <0x51002000 0x14c>, + <0x51001000 0x28>, + <0x20001000 0x10000000>; reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space"; interrupts = <0 232 0x4>; num-lanes = <1>; num-ib-windows = <4>; num-ob-windows = <16>; - ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; @@ -224,28 +250,42 @@ }; }; - axi@1 { - compatible = "simple-bus"; + /* + * Register access seems to have complex dependencies and also + * seems to need an enabled phy. See the TRM chapter for "Table + * 26-678. Main Sequence PCIe Controller Global Initialization" + * and also dra7xx_pcie_probe(). + */ + axi1: target-module@51800000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>, + <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>; + clock-names = "fck", "phy-clk", "phy-clk-div"; + power-domains = <&prm_l3init>; + resets = <&prm_l3init 1>; + reset-names = "rstctrl"; #size-cells = <1>; #address-cells = <1>; - ranges = <0x51800000 0x51800000 0x3000 - 0x0 0x30000000 0x10000000>; + ranges = <0x51800000 0x51800000 0x3000>, + <0x30000000 0x30000000 0x10000000>; dma-ranges; status = "disabled"; pcie2_rc: pcie@51800000 { - reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg = <0x51800000 0x2000>, + <0x51802000 0x14c>, + <0x30001000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; interrupts = <0 355 0x4>, <0 356 0x4>; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - ranges = <0x81000000 0 0 0x03000 0 0x00010000 - 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>, + <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>; bus-range = <0x00 0xff>; #interrupt-cells = <1>; num-lanes = <1>; linux,pci-domain = <1>; - ti,hwmods = "pcie2"; phys = <&pcie2_phy>; phy-names = "pcie-phy0"; interrupt-map-mask = <0 0 0 7>; @@ -336,8 +376,15 @@ target-module@43300000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43300000 0x4>; - reg-names = "rev"; + reg = <0x43300000 0x4>, + <0x43300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -369,8 +416,15 @@ target-module@43400000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43400000 0x4>; - reg-names = "rev"; + reg = <0x43400000 0x4>, + <0x43400010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -387,8 +441,15 @@ target-module@43500000 { compatible = "ti,sysc-omap4", "ti,sysc"; - reg = <0x43500000 0x4>; - reg-names = "rev"; + reg = <0x43500000 0x4>, + <0x43500010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -403,11 +464,23 @@ }; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + }; }; ipu1: ipu@58820000 { @@ -694,32 +767,36 @@ >; }; - qspi: spi@4b300000 { - compatible = "ti,dra7xxx-qspi"; - reg = <0x4b300000 0x100>, - <0x5c000000 0x4000000>; - reg-names = "qspi_base", "qspi_mmap"; - syscon-chipselects = <&scm_conf 0x558>; - #address-cells = <1>; - #size-cells = <0>; - ti,hwmods = "qspi"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + target-module@4b300000 { + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x4b300000 0x4>, + <0x4b300010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>; clock-names = "fck"; - num-cs = <4>; - interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4b300000 0x1000>, + <0x5c000000 0x5c000000 0x4000000>; + + qspi: spi@0 { + compatible = "ti,dra7xxx-qspi"; + reg = <0 0x100>, + <0x5c000000 0x4000000>; + reg-names = "qspi_base", "qspi_mmap"; + syscon-chipselects = <&scm_conf 0x558>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>; + clock-names = "fck"; + num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; /* OCP2SCP1 */ @@ -1241,3 +1318,22 @@ assigned-clock-parents = <&sys_32k_ck>; }; }; + +/* Local timers, see ARM architected timer wrap erratum i940 */ +&timer3_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; + +&timer4_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>; + assigned-clock-parents = <&timer_sys_clk_div>; + }; +}; diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi index 365931f8b48d..57bdad2c1994 100644 --- a/arch/arm/boot/dts/ep7209.dtsi +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -10,6 +10,8 @@ model = "Cirrus Logic EP7209"; compatible = "cirrus,ep7209"; + chosen { }; + aliases { gpio0 = &porta; gpio1 = &portb; @@ -108,6 +110,7 @@ compatible = "cirrus,ep7209-fb"; reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; clocks = <&clks CLPS711X_CLK_BUS>; + syscon = <&syscon1>; status = "disabled"; }; @@ -132,7 +135,7 @@ #pwm-cells = <1>; }; - uart1: uart@80000480 { + uart1: serial@80000480 { compatible = "cirrus,ep7209-uart"; reg = <0x80000480 0x80>; interrupts = <12 13>; @@ -147,6 +150,7 @@ reg = <0x80000500 0x4>; interrupts = <15>; clocks = <&clks CLPS711X_CLK_SPI>; + syscon = <&syscon3>; status = "disabled"; }; @@ -155,7 +159,7 @@ reg = <0x80001100 0x80>; }; - uart2: uart@80001480 { + uart2: serial@80001480 { compatible = "cirrus,ep7209-uart"; reg = <0x80001480 0x80>; interrupts = <28 29>; @@ -170,6 +174,7 @@ clocks = <&clks CLPS711X_CLK_PLL>; clock-names = "pll"; interrupts = <32>; + syscon = <&syscon3>; status = "disabled"; }; @@ -179,8 +184,17 @@ }; }; + keypad: keypad { + compatible = "cirrus,ep7209-keypad"; + interrupt-parent = <&intc>; + interrupts = <16>; + syscon = <&syscon1>; + status = "disabled"; + }; + mctrl: mctrl { compatible = "cirrus,ep7209-mctrl-gpio"; + gpio,syscon-dev = <&syscon1 0 0>; gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts index da076479c8e2..7fb532f227af 100644 --- a/arch/arm/boot/dts/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -7,7 +7,7 @@ model = "Cirrus Logic EP7211 Development Board"; compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; - memory { + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x02000000>; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index fae046e08a5d..8b41a9d5e2db 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -142,7 +142,7 @@ assigned-clock-rates = <6000000>; thermistor-ap { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; @@ -150,7 +150,7 @@ }; thermistor-battery { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index d64ccf4b7d32..c52b9cf4f74c 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -142,7 +142,7 @@ assigned-clock-rates = <6000000>; thermistor-ap { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; @@ -150,7 +150,7 @@ }; thermistor-battery { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; pullup-ohm = <100000>; pulldown-ohm = <100000>; diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts index 304a8ee2364c..525ff3d2fac3 100644 --- a/arch/arm/boot/dts/exynos4210-i9100.dts +++ b/arch/arm/boot/dts/exynos4210-i9100.dts @@ -136,7 +136,7 @@ compatible = "maxim,max17042"; interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max17042_fuel_irq>; pinctrl-names = "default"; @@ -147,6 +147,36 @@ }; }; + i2c_s5k5baf: i2c-gpio-1 { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + + image-sensor@2d { + compatible = "samsung,s5k5baf"; + reg = <0x2d>; + vdda-supply = <&cam_io_en_reg>; + vddreg-supply = <&vt_core_15v_reg>; + vddio-supply = <&vtcam_reg>; + clocks = <&camera 0>; + clock-names = "mclk"; + stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; + rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; + clock-frequency = <24000000>; + + port { + s5k5bafx_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; + spi-3 { compatible = "spi-gpio"; #address-cells = <1>; @@ -220,7 +250,29 @@ }; &camera { + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; + assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + clock-frequency = <160000000>; + #address-cells = <1>; + #size-cells = <0>; + + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&s5k5bafx_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <6>; + }; + }; }; &cpu0 { @@ -384,6 +436,8 @@ pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; pinctrl-names = "default"; + charger-supply = <&charger_reg>; + regulators { vadc_reg: LDO1 { regulator-name = "VADC_3.3V_C210"; diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi index 111c32bae02c..fc77c1bfd844 100644 --- a/arch/arm/boot/dts/exynos4412-midas.dtsi +++ b/arch/arm/boot/dts/exynos4412-midas.dtsi @@ -173,7 +173,7 @@ pmic@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_irq>; reg = <0x66>; @@ -221,7 +221,7 @@ fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77693_fuel_irq>; reg = <0x36>; @@ -665,7 +665,7 @@ max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; reg = <0x09>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 2b20d9095d9f..5bd05866d7a3 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -2,7 +2,7 @@ /* * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards * device tree source -*/ + */ #include <dt-bindings/sound/samsung-i2s.h> #include <dt-bindings/input/input.h> @@ -122,6 +122,7 @@ }; &clock { + clocks = <&clock CLK_XUSBXTI>; assigned-clocks = <&clock CLK_FOUT_EPLL>; assigned-clock-rates = <45158401>; }; @@ -278,7 +279,7 @@ max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; reg = <0x09>; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 0e9d626e740a..440135d0ff2a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -84,7 +84,8 @@ ethernet: usbether@1 { compatible = "usb0424,ec00"; reg = <1>; - local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ + /* Filled in by a bootloader */ + local-mac-address = [00 00 00 00 00 00]; }; }; }; diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi index b2f9d5448a18..9e750890edb8 100644 --- a/arch/arm/boot/dts/exynos4412-p4note.dtsi +++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi @@ -146,7 +146,7 @@ pinctrl-0 = <&fuel_alert_irq>; pinctrl-names = "default"; interrupt-parent = <&gpx2>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; maxim,rsns-microohm = <10000>; maxim,over-heat-temp = <600>; maxim,over-volt = <4300>; @@ -322,7 +322,7 @@ max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; - interrupts = <7 IRQ_TYPE_NONE>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&max77686_irq>; pinctrl-names = "default"; reg = <0x09>; diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi index 3a3b2fafefdd..7f187a3dedcc 100644 --- a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi @@ -7,41 +7,41 @@ */ &ppmu_dmc0 { - status = "okay"; + status = "okay"; - events { - ppmu_dmc0_3: ppmu-event3-dmc0 { - event-name = "ppmu-event3-dmc0"; - }; - }; + events { + ppmu_dmc0_3: ppmu-event3-dmc0 { + event-name = "ppmu-event3-dmc0"; + }; + }; }; &ppmu_dmc1 { - status = "okay"; + status = "okay"; - events { - ppmu_dmc1_3: ppmu-event3-dmc1 { - event-name = "ppmu-event3-dmc1"; - }; - }; + events { + ppmu_dmc1_3: ppmu-event3-dmc1 { + event-name = "ppmu-event3-dmc1"; + }; + }; }; &ppmu_leftbus { - status = "okay"; + status = "okay"; - events { - ppmu_leftbus_3: ppmu-event3-leftbus { - event-name = "ppmu-event3-leftbus"; - }; - }; + events { + ppmu_leftbus_3: ppmu-event3-leftbus { + event-name = "ppmu-event3-leftbus"; + }; + }; }; &ppmu_rightbus { - status = "okay"; + status = "okay"; - events { - ppmu_rightbus_3: ppmu-event3-rightbus { - event-name = "ppmu-event3-rightbus"; - }; - }; + events { + ppmu_rightbus_3: ppmu-event3-rightbus { + event-name = "ppmu-event3-rightbus"; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 8b5a79a8720c..39bbe18145cf 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -134,7 +134,7 @@ compatible = "maxim,max77686"; reg = <0x09>; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; #clock-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index 6635f6184051..2335c4687349 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -292,7 +292,7 @@ max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&max77686_irq>; wakeup-source; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index d0aa18443a69..9599ba8ba798 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -235,13 +235,13 @@ interrupt-parent = <&combiner>; #interrupt-cells = <2>; interrupts = <23 0>, - <24 0>, - <25 0>, - <25 1>, - <26 0>, - <26 1>, - <27 0>, - <27 1>; + <24 0>, + <25 0>, + <25 1>, + <26 0>, + <26 1>, + <27 0>, + <27 1>; }; gpx1: gpx1 { @@ -252,13 +252,13 @@ interrupt-parent = <&combiner>; #interrupt-cells = <2>; interrupts = <28 0>, - <28 1>, - <29 0>, - <29 1>, - <30 0>, - <30 1>, - <31 0>, - <31 1>; + <28 1>, + <29 0>, + <29 1>, + <30 0>, + <30 1>, + <31 0>, + <31 1>; }; gpx2: gpx2 { diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts index 97cfd970fe74..82ce8c43be86 100644 --- a/arch/arm/boot/dts/imx50-kobo-aura.dts +++ b/arch/arm/boot/dts/imx50-kobo-aura.dts @@ -143,10 +143,24 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; - /* TODO: embedded controller at 0x43 */ + embedded-controller@43 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ec>; + compatible = "netronix,ntxec"; + reg = <0x43>; + system-power-controller; + interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>; + #pwm-cells = <2>; + }; }; &iomuxc { + pinctrl_ec: ecgrp { + fsl,pins = < + MX50_PAD_CSPI_SS0__GPIO4_11 0x0 /* INT */ + >; + }; + pinctrl_gpiokeys: gpiokeysgrp { fsl,pins = < MX50_PAD_CSPI_MISO__GPIO4_10 0x0 diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 7ebb46ce9e36..01cfcbe5928e 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -467,7 +467,7 @@ }; iim: efuse@83f98000 { - compatible = "fsl,imx51-iim", "fsl,imx27-iim"; + compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon"; reg = <0x83f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 9b4efcd82636..fe4244044a0f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -142,6 +142,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -209,6 +210,7 @@ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_EIM_DA13__GPIO3_13 0xe4 >; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 000050aeeabe..2cf3909cca2f 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -668,7 +668,7 @@ }; iim: efuse@63f98000 { - compatible = "fsl,imx53-iim", "fsl,imx27-iim"; + compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon"; reg = <0x63f98000 0x4000>; interrupts = <69>; clocks = <&clks IMX5_CLK_IIM_GATE>; diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts index 333c306aa946..bf72a67a9c76 100644 --- a/arch/arm/boot/dts/imx6dl-plybas.dts +++ b/arch/arm/boot/dts/imx6dl-plybas.dts @@ -19,17 +19,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@20 { + button-start { label = "START"; linux,code = <31>; gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; }; - button@21 { + button-clean { label = "CLEAN"; linux,code = <46>; gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts index 604f2420370f..d994b32ad825 100644 --- a/arch/arm/boot/dts/imx6q-b450v3.dts +++ b/arch/arm/boot/dts/imx6q-b450v3.dts @@ -84,6 +84,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + P04-hog { gpio-hog; gpios = <4 0>; diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts index 56d2aeb1900c..fa1a1df37cde 100644 --- a/arch/arm/boot/dts/imx6q-b650v3.dts +++ b/arch/arm/boot/dts/imx6q-b650v3.dts @@ -84,6 +84,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "", "SM_D_ACT", "DP1_RST#", "", + "WD15S_EN", "WD15S_DIS#", "", "", + "", "", "", ""; + P07-hog { gpio-hog; gpios = <7 0>; diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts index 3d6b757bf325..db8c332df6a1 100644 --- a/arch/arm/boot/dts/imx6q-b850v3.dts +++ b/arch/arm/boot/dts/imx6q-b850v3.dts @@ -199,6 +199,11 @@ }; &pca9539 { + gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN", + "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#", + "", "", "", "", + "", "", "", ""; + P10-hog { gpio-hog; gpios = <8 0>; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index e4578ed3371e..6330d75f8f39 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -124,6 +124,9 @@ regulator-name = "usb_otg_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -172,7 +175,19 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii-id"; + phy-supply = <®_3p3v>; + phy-handle = <&phy0>; status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@4 { + reg = <4>; + qca,clk-out-frequency = <125000000>; + }; + }; }; &hdmi { @@ -575,6 +590,12 @@ >; }; + pinctrl_usbotg_vbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + pinctrl_usdhc2: usdhc2grp { fsl,pins = < MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index 2a98cc657595..10922375c51e 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -173,8 +173,8 @@ &i2c1 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c1_gpio>; - sda-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; pca9547: mux@70 { compatible = "nxp,pca9547"; @@ -315,15 +315,15 @@ &i2c2 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c2_gpio>; - sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &i2c3 { pinctrl-names = "default", "gpio"; pinctrl-1 = <&pinctrl_i2c3_gpio>; - sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; - scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 959d8ac2e393..8e587e17e75d 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -32,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 8072ed47c6bb..a0710d562766 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -32,8 +32,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 8c9bcdd39830..29ba24c273e9 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -33,8 +33,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi index e5d803d023c8..435dec6338fe 100644 --- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -67,8 +67,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi index 290a607fede9..2e61102ae694 100644 --- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi index 093a219a77ae..4bc4371e6bae 100644 --- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi @@ -91,8 +91,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index e1c8dd233cab..1fdb7ba630f1 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -75,8 +75,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi index 3cd2e717c1da..304f3fb88fab 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi @@ -72,8 +72,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi index 21c68a55bcb9..fcd3bdfd6182 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi @@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index ed4e22259959..68e5ab2e27e2 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -26,8 +26,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi index 797f160249f7..0415bcb41640 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 4cd7d290f5b2..8e23cec7149e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -23,8 +23,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; user-pb { label = "user_pb"; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index d434868e870a..51d28e275aa6 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -78,7 +78,8 @@ ssi2 { fsl,audmux-port = <1>; fsl,port-config = < - (IMX_AUDMUX_V2_PTCR_TFSDIR | + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | IMX_AUDMUX_V2_PTCR_TFSEL(4) | IMX_AUDMUX_V2_PTCR_TCLKDIR | IMX_AUDMUX_V2_PTCR_TCSEL(4)) @@ -89,7 +90,7 @@ pins5 { fsl,audmux-port = <4>; fsl,port-config = < - 0x00000000 + IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(1) >; }; @@ -164,6 +165,7 @@ &usbotg { status = "okay"; + dr_mode = "peripheral"; }; &usdhc2 { diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 7a1e53195785..7bd658b7bdda 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -31,6 +31,8 @@ reg_usb_h1_vbus: regulator@1 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; reg = <1>; regulator-name = "usb_h1_vbus"; regulator-min-microvolt = <5000000>; @@ -41,6 +43,8 @@ }; gpio_leds: leds { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; compatible = "gpio-leds"; green { @@ -122,6 +126,8 @@ }; pmic@58 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; compatible = "dlg,da9063"; reg = <0x58>; interrupt-parent = <&gpio2>; @@ -215,25 +221,13 @@ }; &iomuxc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; - imx6q-phytec-pfla02 { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 - MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ - MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ - >; - }; - pinctrl_ecspi3: ecspi3grp { fsl,pins = < MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* CS0 */ >; }; @@ -255,6 +249,7 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 /* Reset GPIO */ >; }; @@ -308,10 +303,21 @@ >; }; + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ + >; + }; + pinctrl_pcie: pciegrp { fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; }; + pinctrl_pmic: pmicgrp { + fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000>; /* PMIC interrupt */ + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -328,9 +334,9 @@ >; }; - pinctrl_usbh1: usbh1grp { + pinctrl_usbh1_vbus: usbh1vbusgrp { fsl,pins = < - MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 >; }; @@ -415,8 +421,6 @@ &usbh1 { vbus-supply = <®_usb_h1_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1>; status = "disabled"; }; @@ -433,6 +437,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd1_reg>; status = "disabled"; }; @@ -442,5 +447,6 @@ &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&vdd_sd0_reg>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi index e6aa0c33754d..fded07f370b3 100644 --- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi +++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi @@ -506,7 +506,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index c070893c509e..b62a0dbb033f 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -97,15 +97,21 @@ &i2c1 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c1>; + pinctrl-1 = <&pinctrl_i2c1_gpio>; + scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio"; pinctrl-0 = <&pinctrl_i2c2>; + pinctrl-1 = <&pinctrl_i2c2_gpio>; + scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; status = "okay"; codec: sgtl5000@a { @@ -185,6 +191,13 @@ >; }; + pinctrl_i2c1_gpio: i2c1gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b0 + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 @@ -192,6 +205,13 @@ >; }; + pinctrl_i2c2_gpio: i2c2gpiogrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b0 + MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b0 + >; + }; + pinctrl_mclk: mclkgrp { fsl,pins = < MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts index 6ea5f918d059..a17b8bbbdb95 100644 --- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts +++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts @@ -97,8 +97,11 @@ pinctrl-1 = <&pinctrl_i2c1_sleep>; status = "okay"; - /* TODO: embedded controller at 0x43 (driver missing) */ - + ec: embedded-controller@43 { + compatible = "netronix,ntxec"; + reg = <0x43>; + #pwm-cells = <2>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index c593597b2119..5a1e10def6ef 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -210,9 +210,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; @@ -222,9 +219,6 @@ micrel,led-mode = <1>; clocks = <&clks IMX6UL_CLK_ENET2_REF>; clock-names = "rmii-ref"; - reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>; - reset-assert-us = <10000>; - reset-deassert-us = <100>; }; }; }; @@ -243,6 +237,22 @@ status = "okay"; }; +&gpio_spi { + eth0-phy-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth0-phy"; + }; + + eth1-phy-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "eth1-phy"; + }; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi index 4436556624d6..0cdbf7b6e728 100644 --- a/arch/arm/boot/dts/imx6ull-colibri.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi @@ -522,12 +522,12 @@ pinctrl_usdhc2: usdhc2-grp { fsl,pins = < - MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 - MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 - MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 - MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 - MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 - MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17059 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17069 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17069 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17069 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17069 + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17069 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17069 MX6UL_PAD_GPIO1_IO03__OSC32K_32K_OUT 0x10 >; diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts index ecbb2cc5b9ab..79cc45728cd2 100644 --- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts +++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts @@ -14,5 +14,6 @@ }; &gpmi { + fsl,use-minimum-ecc; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 5ef86de53013..23856a8d4b8c 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -99,8 +99,6 @@ /* probe deferral not supported */ /* pcie-bus-supply = <®_mpcie_1v5>; */ reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>; - disable-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; - power-on-gpio = <&gpio2 30 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts new file mode 100644 index 000000000000..8cbae656395c --- /dev/null +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/ + * + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "reMarkable 2.0"; + compatible = "remarkable,imx7d-remarkable2", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&clks { + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, + <&clks IMX7D_CLKO2_ROOT_DIV>; + assigned-clock-parents = <&clks IMX7D_CKIL>; + assigned-clock-rates = <0>, <32768>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + status = "okay"; +}; + +&usbotg2 { + srp-disable; + hnp-disable; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + pinctrl-3 = <&pinctrl_usdhc3>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + +&iomuxc { + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79 + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74 + >; + }; +}; diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 63cafd220dba..bc857676d191 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -325,8 +325,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi1 &src3 &dvc1>; - capture = <&ssi0 &src2 &dvc0>; + playback = <&ssi1>, <&src3>, <&dvc1>; + capture = <&ssi0>, <&src2>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 007dd2bd0595..4fce81422943 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -246,6 +246,7 @@ reg = <0x0 0x1700000 0x0 0x100000>; ranges = <0x0 0x0 0x1700000 0x100000>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; sec_jr0: jr@10000 { compatible = "fsl,sec-v5.0-job-ring", @@ -871,7 +872,7 @@ phy_type = "ulpi"; }; - usb3: usb3@3100000 { + usb3: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi index 08a7d3ce383f..ea02fd403a9b 100644 --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi @@ -27,16 +27,14 @@ cpcap_battery: battery { compatible = "motorola,cpcap-battery"; - interrupts-extended = < - &cpcap 6 0 &cpcap 5 0 &cpcap 3 0 - &cpcap 20 0 &cpcap 54 0 &cpcap 57 0 - >; + interrupts-extended = + <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>, + <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>; interrupt-names = "eol", "lowbph", "lowbpl", - "chrgcurr1", "battdetb", - "cccal"; - io-channels = <&cpcap_adc 0 &cpcap_adc 1 - &cpcap_adc 5 &cpcap_adc 6>; + "chrgcurr1", "battdetb", "cccal"; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 5>, <&cpcap_adc 6>; io-channel-names = "battdetb", "battp", "chg_isense", "batti"; power-supplies = <&cpcap_charger>; @@ -44,20 +42,19 @@ cpcap_charger: charger { compatible = "motorola,mapphone-cpcap-charger"; - interrupts-extended = < - &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0 - &cpcap 22 0 &cpcap 21 0 &cpcap 20 0 &cpcap 19 0 - &cpcap 54 0 - >; + interrupts-extended = + <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, + <&cpcap 28 0>, <&cpcap 22 0>, <&cpcap 21 0>, + <&cpcap 20 0>, <&cpcap 19 0>, <&cpcap 54 0>; interrupt-names = - "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn", - "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld", - "battdetb"; - mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW - &gpio3 23 GPIO_ACTIVE_LOW>; - io-channels = <&cpcap_adc 0 &cpcap_adc 1 - &cpcap_adc 2 &cpcap_adc 5 - &cpcap_adc 6>; + "chrg_det", "rvrs_chrg", "chrg_se1b", + "se0conn", "rvrs_mode", "chrgcurr2", + "chrgcurr1", "vbusvld", "battdetb"; + mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 23 GPIO_ACTIVE_LOW>; + io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>, + <&cpcap_adc 2>, <&cpcap_adc 5>, + <&cpcap_adc 6>; io-channel-names = "battdetb", "battp", "vbus", "chg_isense", "batti"; @@ -98,22 +95,22 @@ cpcap_usb2_phy: phy { compatible = "motorola,mapphone-cpcap-usb-phy"; - pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>; + pinctrl-0 = <&usb_gpio_mux_sel1>, <&usb_gpio_mux_sel2>; pinctrl-1 = <&usb_ulpi_pins>; pinctrl-2 = <&usb_utmi_pins>; pinctrl-3 = <&uart3_pins>; pinctrl-names = "default", "ulpi", "utmi", "uart"; #phy-cells = <0>; - interrupts-extended = < - &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0 - &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0 - &cpcap 48 0 - >; + interrupts-extended = + <&cpcap 15 0>, <&cpcap 14 0>, <&cpcap 28 0>, + <&cpcap 19 0>, <&cpcap 18 0>, <&cpcap 17 0>, + <&cpcap 16 0>, <&cpcap 49 0>, <&cpcap 48 0>; interrupt-names = - "id_ground", "id_float", "se0conn", "vbusvld", - "sessvld", "sessend", "se1", "dm", "dp"; - mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH - &gpio1 0 GPIO_ACTIVE_HIGH>; + "id_ground", "id_float", "se0conn", + "vbusvld", "sessvld", "sessend", + "se1", "dm", "dp"; + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, + <&gpio1 0 GPIO_ACTIVE_HIGH>; io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>; io-channel-names = "vbus", "id"; vusb-supply = <&vusb>; diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts new file mode 100644 index 000000000000..a81684002e45 --- /dev/null +++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-unitv2.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (c) 2021 thingy.jp. + * Author: Daniel Palmer <daniel@thingy.jp> + */ + +/dts-v1/; +#include "mstar-infinity2m-ssd202d.dtsi" + +/ { + model = "UnitV2"; + compatible = "m5stack,unitv2", "mstar,infinity2m"; + + aliases { + serial0 = &pm_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&pm_uart { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi index b0a21b0b731f..075d583d6f40 100644 --- a/arch/arm/boot/dts/mstar-v7.dtsi +++ b/arch/arm/boot/dts/mstar-v7.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/mstar-msc313-mpll.h> / { #address-cells = <1>; @@ -46,6 +47,21 @@ interrupt-affinity = <&cpu0>; }; + clocks: clocks { + xtal: xtal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + rtc_xtal: rtc_xtal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + status = "disabled"; + }; + }; + soc: soc { compatible = "simple-bus"; #address-cells = <1>; @@ -109,6 +125,13 @@ reg = <0x204400 0x200>; }; + mpll: mpll@206000 { + compatible = "mstar,msc313-mpll"; + #clock-cells = <1>; + reg = <0x206000 0x200>; + clocks = <&xtal>; + }; + gpio: gpio@207800 { #gpio-cells = <2>; reg = <0x207800 0x200>; diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi index fade14284017..4776f85d6d5b 100644 --- a/arch/arm/boot/dts/mt2701.dtsi +++ b/arch/arm/boot/dts/mt2701.dtsi @@ -607,7 +607,7 @@ }; usb0: usb@1a1c0000 { - compatible = "mediatek,mt8173-xhci"; + compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci"; reg = <0 0x1a1c0000 0 0x1000>, <0 0x1a1c4700 0 0x0100>; reg-names = "mac", "ippc"; @@ -620,8 +620,9 @@ status = "disabled"; }; - u3phy0: usb-phy@1a1c4000 { - compatible = "mediatek,mt2701-u3phy"; + u3phy0: t-phy@1a1c4000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a1c4000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -646,7 +647,7 @@ }; usb1: usb@1a240000 { - compatible = "mediatek,mt8173-xhci"; + compatible = "mediatek,mt2701-xhci", "mediatek,mtk-xhci"; reg = <0 0x1a240000 0 0x1000>, <0 0x1a244700 0 0x0100>; reg-names = "mac", "ippc"; @@ -659,8 +660,9 @@ status = "disabled"; }; - u3phy1: usb-phy@1a244000 { - compatible = "mediatek,mt2701-u3phy"; + u3phy1: t-phy@1a244000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a244000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -700,8 +702,9 @@ status = "disabled"; }; - u2phy0: usb-phy@11210000 { - compatible = "mediatek,generic-tphy-v1"; + u2phy0: t-phy@11210000 { + compatible = "mediatek,mt2701-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x11210000 0 0x0800>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi index f3ccb70c0779..70df00a7bb26 100644 --- a/arch/arm/boot/dts/mt6589.dtsi +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -17,6 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt6589-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index aea6809500d7..3c11f7cfcc40 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -787,8 +787,9 @@ }; }; - pcie0_phy: pcie-phy@1a149000 { - compatible = "mediatek,generic-tphy-v1"; + pcie0_phy: t-phy@1a149000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a149000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -804,8 +805,9 @@ }; }; - pcie1_phy: pcie-phy@1a14a000 { - compatible = "mediatek,generic-tphy-v1"; + pcie1_phy: t-phy@1a14a000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a14a000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -823,7 +825,7 @@ usb1: usb@1a1c0000 { compatible = "mediatek,mt7623-xhci", - "mediatek,mt8173-xhci"; + "mediatek,mtk-xhci"; reg = <0 0x1a1c0000 0 0x1000>, <0 0x1a1c4700 0 0x0100>; reg-names = "mac", "ippc"; @@ -836,9 +838,9 @@ status = "disabled"; }; - u3phy1: usb-phy@1a1c4000 { - compatible = "mediatek,mt7623-u3phy", - "mediatek,mt2701-u3phy"; + u3phy1: t-phy@1a1c4000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a1c4000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; @@ -864,7 +866,7 @@ usb2: usb@1a240000 { compatible = "mediatek,mt7623-xhci", - "mediatek,mt8173-xhci"; + "mediatek,mtk-xhci"; reg = <0 0x1a240000 0 0x1000>, <0 0x1a244700 0 0x0100>; reg-names = "mac", "ippc"; @@ -877,9 +879,9 @@ status = "disabled"; }; - u3phy2: usb-phy@1a244000 { - compatible = "mediatek,mt7623-u3phy", - "mediatek,mt2701-u3phy"; + u3phy2: t-phy@1a244000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; reg = <0 0x1a244000 0 0x0700>; #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt7623n.dtsi b/arch/arm/boot/dts/mt7623n.dtsi index 1880ac9e32cf..bcb0846e29fd 100644 --- a/arch/arm/boot/dts/mt7623n.dtsi +++ b/arch/arm/boot/dts/mt7623n.dtsi @@ -246,7 +246,7 @@ status = "disabled"; }; - mipi_tx0: mipi-dphy@10010000 { + mipi_tx0: dsi-phy@10010000 { compatible = "mediatek,mt7623-mipi-tx", "mediatek,mt2701-mipi-tx"; reg = <0 0x10010000 0 0x90>; @@ -265,7 +265,7 @@ status = "disabled"; }; - hdmi_phy: phy@10209100 { + hdmi_phy: hdmi-phy@10209100 { compatible = "mediatek,mt7623-hdmi-phy", "mediatek,mt2701-hdmi-phy"; reg = <0 0x10209100 0 0x24>; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 5cbb3d244c75..874043f0490d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -329,8 +329,9 @@ status = "disabled"; }; - u3phy0: usb-phy@1a0c4000 { - compatible = "mediatek,generic-tphy-v2"; + u3phy0: t-phy@1a0c4000 { + compatible = "mediatek,mt7629-tphy", + "mediatek,generic-tphy-v2"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1a0c4000 0xe00>; @@ -413,14 +414,15 @@ }; }; - pciephy1: pcie-phy@1a14a000 { - compatible = "mediatek,generic-tphy-v2"; + pciephy1: t-phy@1a14a000 { + compatible = "mediatek,mt7629-tphy", + "mediatek,generic-tphy-v2"; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x1a14a000 0x1000>; status = "disabled"; - pcieport1: port1phy@0 { + pcieport1: pcie-phy@0 { reg = <0 0x1000>; clocks = <&clk20m>; clock-names = "ref"; diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts new file mode 100644 index 000000000000..eb6eb21cb2a4 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-npcm730-gbs.dts @@ -0,0 +1,1135 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2020 Quanta Computer Inc. George.Hung@quantatw.com + +/dts-v1/; +#include "nuvoton-npcm730.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Quanta GBS Board (Device Tree)"; + compatible = "quanta,gbs-bmc","nuvoton,npcm730"; + + aliases { + ethernet1 = &gmac0; + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + i2c16 = &i2c0_slotPE0_0; + i2c17 = &i2c0_slotPE1_1; + i2c18 = &i2c0_slotUSB_2; + i2c19 = &i2c0_3; + i2c20 = &i2c5_i2cool_0; + i2c21 = &i2c5_i2cool_1; + i2c22 = &i2c5_i2cool_2; + i2c23 = &i2c5_hsbp_fru_3; + i2c24 = &i2c6_u2_15_0; + i2c25 = &i2c6_u2_14_1; + i2c26 = &i2c6_u2_13_2; + i2c27 = &i2c6_u2_12_3; + i2c28 = &i2c7_u2_11_0; + i2c29 = &i2c7_u2_10_1; + i2c30 = &i2c7_u2_9_2; + i2c31 = &i2c7_u2_8_3; + i2c32 = &i2c9_vddcr_cpu; + i2c33 = &i2c9_vddcr_soc; + i2c34 = &i2c9_vddio_efgh; + i2c35 = &i2c9_vddio_abcd; + i2c36 = &i2c10_u2_7_0; + i2c37 = &i2c10_u2_6_1; + i2c38 = &i2c10_u2_5_2; + i2c39 = &i2c10_u2_4_3; + i2c40 = &i2c11_clk_buf0_0; + i2c41 = &i2c11_clk_buf1_1; + i2c42 = &i2c11_clk_buf2_2; + i2c43 = &i2c11_clk_buf3_3; + i2c44 = &i2c14_u2_3_0; + i2c45 = &i2c14_u2_2_1; + i2c46 = &i2c14_u2_1_2; + i2c47 = &i2c14_u2_0_3; + fiu0 = &fiu0; + fiu1 = &fiu3; + }; + + chosen { + stdout-path = &serial0; + }; + + memory { + reg = <0 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + sas-cable0 { + label = "sas-cable0"; + gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; + linux,code = <73>; + }; + + sas-cable1 { + label = "sas-cable1"; + gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; + linux,code = <72>; + }; + + sas-cable2 { + label = "sas-cable2"; + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + linux,code = <71>; + }; + + sas-cable3 { + label = "sas-cable3"; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + linux,code = <70>; + }; + + sata0 { + label = "sata0"; + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + hsbp-cable { + label = "hsbp-cable"; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + linux,code = <57>; + }; + + fanbd-cable { + label = "fanbd-cable"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + linux,code = <58>; + }; + + bp12v-cable { + label = "bp12v-cable"; + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; + linux,code = <69>; + }; + + pe-slot0 { + label = "pe-slot0"; + gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + linux,code = <120>; + }; + + pe-slot1 { + label = "pe-slot1"; + gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + linux,code = <121>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 1>, <&adc 2>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 0>; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { /* gpio153 */ + gpios = <&gpio4 25 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + attention { /* gpio215 */ + gpios = <&gpio6 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + sys_boot_status { /* gpio216 */ + gpios = <&gpio6 24 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + retain-state-shutdown; + }; + + bmc_fault { /* gpio217 */ + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "panic"; + panic-indicator; + }; + + led_u2_0_locate { + gpios = <&pca9535_ledlocate 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_1_locate { + gpios = <&pca9535_ledlocate 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_2_locate { + gpios = <&pca9535_ledlocate 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_3_locate { + gpios = <&pca9535_ledlocate 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_4_locate { + gpios = <&pca9535_ledlocate 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_5_locate { + gpios = <&pca9535_ledlocate 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_6_locate { + gpios = <&pca9535_ledlocate 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_7_locate { + gpios = <&pca9535_ledlocate 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_8_locate { + gpios = <&pca9535_ledlocate 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_9_locate { + gpios = <&pca9535_ledlocate 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_10_locate { + gpios = <&pca9535_ledlocate 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_11_locate { + gpios = <&pca9535_ledlocate 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_12_locate { + gpios = <&pca9535_ledlocate 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_13_locate { + gpios = <&pca9535_ledlocate 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_14_locate { + gpios = <&pca9535_ledlocate 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_15_locate { + gpios = <&pca9535_ledlocate 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_0_fault { + gpios = <&pca9535_ledfault 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_1_fault { + gpios = <&pca9535_ledfault 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_2_fault { + gpios = <&pca9535_ledfault 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_3_fault { + gpios = <&pca9535_ledfault 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_4_fault { + gpios = <&pca9535_ledfault 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_5_fault { + gpios = <&pca9535_ledfault 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_6_fault { + gpios = <&pca9535_ledfault 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_7_fault { + gpios = <&pca9535_ledfault 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_8_fault { + gpios = <&pca9535_ledfault 11 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_9_fault { + gpios = <&pca9535_ledfault 10 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_10_fault { + gpios = <&pca9535_ledfault 9 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_11_fault { + gpios = <&pca9535_ledfault 8 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_12_fault { + gpios = <&pca9535_ledfault 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_13_fault { + gpios = <&pca9535_ledfault 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_14_fault { + gpios = <&pca9535_ledfault 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led_u2_15_fault { + gpios = <&pca9535_ledfault 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + }; + + seven-seg-disp { + compatible = "seven-seg-gpio-dev"; + refresh-interval-ms = /bits/ 16 <600>; + clock-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + data-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + clear-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + }; + + pcie-slot { + pcie1: pcie-slot@1 { + label = "PE0"; + }; + pcie2: pcie-slot@2 { + label = "PE1"; + }; + }; +}; + +&fiu0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0cs1_pins>; + status = "okay"; + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <2>; + label = "bmc"; + partitions@80000000 { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + u-boot@0 { + label = "u-boot"; + reg = <0x0000000 0xf0000>; + }; + image-descriptor@f0000 { + label = "image-descriptor"; + reg = <0xf0000 0x10000>; + }; + hoth-update@100000 { + label = "hoth-update"; + reg = <0x100000 0x100000>; + }; + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; + }; + rofs@700000 { + label = "rofs"; + reg = <0x700000 0x35f0000>; + }; + rwfs@3cf0000 { + label = "rwfs"; + reg = <0x3cf0000 0x300000>; + }; + hoth-mailbox@3ff0000 { + label = "hoth-mailbox"; + reg = <0x3ff0000 0x10000>; + }; + }; + }; +}; + +&fiu3 { + pinctrl-0 = <&spi3_pins>, <&spi3cs1_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + m25p,fast-read; + label = "pnor"; + }; + spi-nor@1 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <1>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <2>; + m25p,fast-read; + }; +}; + +&gcr { + serial_port_mux: uart-mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x38 0x07>; + idle-states = <2>; /* Serial port mode 3 (takeover) */ + }; + + uart1_mode_mux: uart1-mode-mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x64 0x01000000>; + idle-states = <0>; /* Set UART1 mode to normal (follow SPMOD) */ + }; +}; + +&gmac0 { + status = "okay"; + phy-mode = "rgmii-id"; + snps,eee-force-disable; +}; + +&ehci1 { + status = "okay"; +}; + +&watchdog1 { + status = "okay"; +}; + +&rng { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&adc { + #io-channel-cells = <1>; + status = "okay"; +}; + +&lpc_kcs { + kcs1: kcs1@0 { + status = "okay"; + }; + + kcs2: kcs2@0 { + status = "okay"; + }; + + kcs3: kcs3@0 { + status = "okay"; + }; +}; + +&spi1 { + cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>; /* dummy - gpio147 */ + pinctrl-names = "default"; + pinctrl-0 = <&gpio224ol_pins &gpio227o_pins + &gpio228_pins>; + status = "okay"; + + jtag_master@0 { + compatible = "nuvoton,npcm750-jtag-master"; + spi-max-frequency = <25000000>; + reg = <0>; + status = "okay"; + + pinctrl-names = "pspi", "gpio"; + pinctrl-0 = <&pspi2_pins>; + pinctrl-1 = <&gpio224ol_pins &gpio227o_pins + &gpio228_pins>; + + tck-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + tdi-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + tdo-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + tms-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + + i2c0_slotPE0_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + pcie-slot = &pcie1; + }; + + i2c0_slotPE1_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + pcie-slot = &pcie2; + }; + + i2c0_slotUSB_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c0_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + status = "okay"; + + pca9535_ifdet: pca9535-ifdet@24 { + compatible = "nxp,pca9535"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9535_pwren: pca9535-pwren@20 { + compatible = "nxp,pca9535"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "pwr_u2_3_en","pwr_u2_2_en", + "pwr_u2_1_en","pwr_u2_0_en", + "pwr_u2_7_en","pwr_u2_6_en", + "pwr_u2_5_en","pwr_u2_4_en", + "pwr_u2_11_en","pwr_u2_10_en", + "pwr_u2_9_en","pwr_u2_8_en", + "pwr_u2_15_en","pwr_u2_14_en", + "pwr_u2_13_en","pwr_u2_12_en"; + }; + + pca9535_pwrgd: pca9535-pwrgd@21 { + compatible = "nxp,pca9535"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + pca9535_ledlocate: pca9535-ledlocate@22 { + compatible = "nxp,pca9535"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + + }; + + pca9535_ledfault: pca9535-ledfault@23 { + compatible = "nxp,pca9535"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + + }; + + pca9535_pwrdisable: pca9535-pwrdisable@25 { + compatible = "nxp,pca9535"; + reg = <0x25>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "u2_3_pwr_dis","u2_2_pwr_dis", + "u2_1_pwr_dis","u2_0_pwr_dis", + "u2_7_pwr_dis","u2_6_pwr_dis", + "u2_5_pwr_dis","u2_4_pwr_dis", + "u2_11_pwr_dis","u2_10_pwr_dis", + "u2_9_pwr_dis","u2_8_pwr_dis", + "u2_15_pwr_dis","u2_14_pwr_dis", + "u2_13_pwr_dis","u2_12_pwr_dis"; + }; + + pca9535_perst: pca9535-perst@26 { + compatible = "nxp,pca9535"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + "u2_15_perst","u2_14_perst", + "u2_13_perst","u2_12_perst", + "u2_11_perst","u2_10_perst", + "u2_9_perst","u2_8_perst", + "u2_7_perst","u2_6_perst", + "u2_5_perst","u2_4_perst", + "u2_3_perst","u2_2_perst", + "u2_1_perst","u2_0_perst"; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + status = "okay"; + + sbtsi@4c { + compatible = "amd,sbtsi"; + reg = <0x4c>; + }; +}; + +&i2c5 { + clock-frequency = <100000>; + status = "okay"; + + mb_fru@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c5_i2cool_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + max31725@54 { + compatible = "maxim,max31725"; + reg = <0x54>; + status = "okay"; + }; + }; + + i2c5_i2cool_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + max31725@55 { + compatible = "maxim,max31725"; + reg = <0x55>; + status = "okay"; + }; + }; + + i2c5_i2cool_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + max31725@5d { + compatible = "maxim,max31725"; + reg = <0x5d>; + status = "okay"; + }; + fan_fru@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + }; + + i2c5_hsbp_fru_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + hsbp_fru@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + status = "okay"; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@73 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x73>; + i2c-mux-idle-disconnect; + + i2c6_u2_15_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c6_u2_14_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c6_u2_13_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c6_u2_12_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@72 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72>; + i2c-mux-idle-disconnect; + + i2c7_u2_11_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c7_u2_10_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c7_u2_9_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c7_u2_8_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + clock-frequency = <100000>; + status = "okay"; + + i2c8_adm1272: adm1272@10 { + compatible = "adi,adm1272"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10>; + shunt-resistor-micro-ohms = <300>; + }; +}; + +&i2c9 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9546"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + + i2c9_vddcr_cpu: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + }; + + i2c9_vddcr_soc: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + vrm@61 { + compatible = "isil,isl68137"; + reg = <0x61>; + }; + }; + + i2c9_vddio_efgh: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + vrm@63 { + compatible = "isil,isl68137"; + reg = <0x63>; + }; + }; + + i2c9_vddio_abcd: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + vrm@45 { + compatible = "isil,isl68137"; + reg = <0x45>; + }; + }; + }; +}; + +&i2c10 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@71 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + i2c-mux-idle-disconnect; + + i2c10_u2_7_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c10_u2_6_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c10_u2_5_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c10_u2_4_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c11 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@76 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x76>; + i2c-mux-idle-disconnect; + + i2c11_clk_buf0_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c11_clk_buf1_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c11_clk_buf2_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c11_clk_buf3_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c12 { + clock-frequency = <100000>; + status = "okay"; + + max34451@4e { + compatible = "maxim,max34451"; + reg = <0x4e>; + }; + vrm@5d { + compatible = "isil,isl68137"; + reg = <0x5d>; + }; + vrm@5e { + compatible = "isil,isl68137"; + reg = <0x5e>; + }; +}; + +&i2c13 { + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c14 { + clock-frequency = <100000>; + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9545"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + i2c-mux-idle-disconnect; + + i2c14_u2_3_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c14_u2_2_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c14_u2_1_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c14_u2_0_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&pwm_fan { + pinctrl-names = "default"; + pinctrl-0 = < + &pwm0_pins &pwm1_pins + &pwm2_pins &pwm3_pins + &pwm4_pins + &fanin0_pins &fanin1_pins + &fanin2_pins &fanin3_pins + &fanin4_pins + >; + status = "okay"; + + fan@0 { + reg = <0x00>; + fan-tach-ch = /bits/ 8 <0x00>; + }; + fan@1 { + reg = <0x01>; + fan-tach-ch = /bits/ 8 <0x01>; + }; + fan@2 { + reg = <0x02>; + fan-tach-ch = /bits/ 8 <0x02>; + }; + fan@3 { + reg = <0x04>; + fan-tach-ch = /bits/ 8 <0x04>; + }; + fan@4 { + reg = <0x03>; + fan-tach-ch = /bits/ 8 <0x03>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + gpio0: gpio@f0010000 { + /* POWER_OUT=gpio07, RESET_OUT=gpio06, PS_PWROK=gpio13 */ + gpio-line-names = + /*0-31*/ + "","","","","","","RESET_OUT","POWER_OUT", + "","","","","","PS_PWROK","","", + "","","","","","","","", + "","","","","","","",""; + }; + gpio1: gpio@f0011000 { + /* SIO_POWER_GOOD=gpio59 */ + gpio-line-names = + /*32-63*/ + "","","","","","","","", + "","","","","","","","", + "","","","","","","","", + "","","","SIO_POWER_GOOD","","","",""; + }; + gpio2: gpio@f0012000 { + bmc_usb_mux_oe_n { + gpio-hog; + gpios = <25 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "bmc-usb-mux-oe-n"; + }; + bmc_usb_mux_sel { + gpio-hog; + gpios = <26 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "bmc-usb-mux-sel"; + }; + bmc_usb2517_reset_n { + gpio-hog; + gpios = <27 GPIO_ACTIVE_LOW>; + output-low; + line-name = "bmc-usb2517-reset-n"; + }; + }; + gpio3: gpio@f0013000 { + assert_cpu0_reset { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "assert-cpu0-reset"; + }; + assert_pwrok_cpu0_n { + gpio-hog; + gpios = <15 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "assert-pwrok-cpu0-n"; + }; + assert_cpu0_prochot { + gpio-hog; + gpios = <16 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "assert-cpu0-prochot"; + }; + }; + gpio4: gpio@f0014000 { + /* POST_COMPLETE=gpio143 */ + gpio-line-names = + /*128-159*/ + "","","","","","","","", + "","","","","","","","POST_COMPLETE", + "","","","","","","","", + "","","","","","","",""; + }; + gpio5: gpio@f0015000 { + /* POWER_BUTTON=gpio177 */ + gpio-line-names = + /*160-191*/ + "","","","","","","","", + "","","","","","","","", + "","POWER_BUTTON","","","","","","", + "","","","","","","",""; + }; + gpio6: gpio@f0016000 { + /* SIO_S5=gpio199, RESET_BUTTON=gpio203 */ + gpio-line-names = + /*192-223*/ + "","","","","","","","SIO_S5", + "","","","RESET_BUTTON","","","","", + "","","","","","","","", + "","","","","","","",""; + }; + + gpio224ol_pins: gpio224ol-pins { + pins = "GPIO224/SPIXCK"; + bias-disable; + output-low; + }; + gpio227o_pins: gpio227o-pins { + pins = "GPIO227/nSPIXCS0"; + bias-disable; + output-high; + }; + gpio228_pins: gpio228-pins { + pins = "GPIO228/nSPIXCS1"; + bias-disable; + input-enable; + }; +}; diff --git a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts index 9f13d08f5804..dea3dbc4a6a5 100644 --- a/arch/arm/boot/dts/nuvoton-npcm750-evb.dts +++ b/arch/arm/boot/dts/nuvoton-npcm750-evb.dts @@ -9,7 +9,7 @@ / { model = "Nuvoton npcm750 Development Board (Device Tree)"; - compatible = "nuvoton,npcm750"; + compatible = "nuvoton,npcm750-evb", "nuvoton,npcm750"; aliases { ethernet2 = &gmac0; diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts new file mode 100644 index 000000000000..83f27fbf4e93 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +// Copyright 2021 Jonathan Neuschäfer + +/dts-v1/; + +/* The last 16 MiB are dedicated to the GPU */ +/memreserve/ 0x07000000 0x01000000; + +#include "nuvoton-wpcm450.dtsi" + +/ { + model = "Supermicro X9SCi-LN4F BMC"; + compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0 0x08000000>; /* 128 MiB */ + }; +}; + +&serial0 { + /* + * Debug serial port. TX is exposed on the right pad of unpopulated + * resistor R1247, RX on the right pad of R1162. + */ + status = "okay"; +}; + +&serial1 { + /* "Serial over LAN" port. Connected to ttyS2 of the host system. */ + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi new file mode 100644 index 000000000000..d7cbeb187484 --- /dev/null +++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +// Copyright 2021 Jonathan Neuschäfer + +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + compatible = "nuvoton,wpcm450"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + }; + }; + + clk24m: clock-24mhz { + /* 24 MHz dummy clock */ + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&aic>; + ranges; + + serial0: serial@b8000000 { + compatible = "nuvoton,wpcm450-uart"; + reg = <0xb8000000 0x20>; + reg-shift = <2>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk24m>; + status = "disabled"; + }; + + serial1: serial@b8000100 { + compatible = "nuvoton,wpcm450-uart"; + reg = <0xb8000100 0x20>; + reg-shift = <2>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk24m>; + status = "disabled"; + }; + + timer0: timer@b8001000 { + compatible = "nuvoton,wpcm450-timer"; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb8001000 0x1c>; + clocks = <&clk24m>; + }; + + watchdog0: watchdog@b800101c { + compatible = "nuvoton,wpcm450-wdt"; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb800101c 0x4>; + clocks = <&clk24m>; + status = "disabled"; + }; + + aic: interrupt-controller@b8002000 { + compatible = "nuvoton,wpcm450-aic"; + reg = <0xb8002000 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts index b9fd113979f2..8f02ff5e7da6 100644 --- a/arch/arm/boot/dts/omap3-echo.dts +++ b/arch/arm/boot/dts/omap3-echo.dts @@ -7,6 +7,7 @@ #include "dm3725.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> / { model = "Amazon Echo (first generation)"; @@ -139,179 +140,367 @@ clock-frequency = <400000>; lp5523A: lp5523A@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; label = "q1"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */ - chan0 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan1 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan2 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan3 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan4 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan5 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan6 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan7 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan8 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + + led@0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + + led@2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x7>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + + led@4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x8>; + color = <LED_COLOR_ID_RED>; + }; }; }; lp5523B: lp5523B@33 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; label = "q3"; reg = <0x33>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ - chan0 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan1 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan2 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan3 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan4 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan5 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan6 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan7 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan8 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + + led@0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + + led@2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x7>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + + led@4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x8>; + color = <LED_COLOR_ID_RED>; + }; }; }; lp5523C: lp5523C@34 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; label = "q4"; reg = <0x34>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ - chan0 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan1 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan2 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan3 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan4 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan5 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan6 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan7 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan8 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + + led@0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + + led@2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x7>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + + led@4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x8>; + color = <LED_COLOR_ID_RED>; + }; }; }; lp5523D: lp552D@35 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; label = "q2"; reg = <0x35>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ - chan0 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan1 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan2 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan3 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan4 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan5 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan6 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan7 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; - }; - chan8 { - led-cur = /bits/ 8 <12>; - max-cur = /bits/ 8 <15>; + multi-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + color = <LED_COLOR_ID_RGB>; + + led@0 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + color = <LED_COLOR_ID_RGB>; + + led@2 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x2>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@3 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x3>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@7 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x7>; + color = <LED_COLOR_ID_RED>; + }; + }; + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + + led@4 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x4>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@5 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x5>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@8 { + led-cur = /bits/ 8 <12>; + max-cur = /bits/ 8 <15>; + reg = <0x8>; + color = <LED_COLOR_ID_RED>; + }; }; }; }; @@ -417,6 +606,8 @@ }; &mmc3 { + #address-cells = <1>; + #size-cells = <0>; status = "okay"; bus-width = <4>; pinctrl-names = "default"; @@ -426,6 +617,11 @@ mmc-pwrseq = <&sdio_pwrseq>; vmmc-supply = <&vcc3v3>; vqmmc-supply = <&vcc1v8>; + atheros@0 { + compatible = "atheros,ath6kl"; + reg = <0>; + bus-width = <4>; + }; }; &tps { diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 9dcae1f2bc99..c5b9da0d7e6c 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -24,6 +24,9 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi index e0bb60a30779..99721673d7af 100644 --- a/arch/arm/boot/dts/omap4-l4.dtsi +++ b/arch/arm/boot/dts/omap4-l4.dtsi @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap4-l4-cfg", "simple-bus"; + compatible = "ti,omap4-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4_cfg_clkctrl OMAP4_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -16,7 +19,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -43,7 +46,6 @@ target-module@2000 { /* 0x4a002000, ap 3 06.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_core"; reg = <0x2000 0x4>, <0x2010 0x4>; reg-names = "rev", "sysc"; @@ -347,7 +349,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -639,7 +641,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x001000>, /* ap 21 */ @@ -653,7 +655,6 @@ target-module@0 { /* 0x4a100000, ap 21 2a.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_pad_core"; reg = <0x0 0x4>, <0x10 0x4>; reg-names = "rev", "sysc"; @@ -741,13 +742,13 @@ }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 31 */ @@ -903,13 +904,13 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; l4_cfg_segment_300000: segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x020000>, /* ap 67 */ @@ -944,7 +945,10 @@ }; &l4_wkup { /* 0x4a300000 */ - compatible = "ti,omap4-l4-wkup", "simple-bus"; + compatible = "ti,omap4-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl OMAP4_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a300000 0x800>, <0x4a300800 0x800>, <0x4a301000 0x1000>; @@ -956,7 +960,7 @@ <0x00020000 0x4a320000 0x010000>; /* segment 2 */ segment@0 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1041,7 +1045,6 @@ target-module@c000 { /* 0x4a30c000, ap 19 2c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_wkup"; reg = <0xc000 0x4>, <0xc010 0x4>; reg-names = "rev", "sysc"; @@ -1062,7 +1065,7 @@ }; segment@10000 { /* 0x4a310000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -1202,7 +1205,6 @@ target-module@e000 { /* 0x4a31e000, ap 21 30.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "ctrl_module_pad_wkup"; reg = <0xe000 0x4>, <0xe010 0x4>; reg-names = "rev", "sysc"; @@ -1231,7 +1233,7 @@ }; segment@20000 { /* 0x4a320000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ @@ -1284,7 +1286,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap4-l4-per", "simple-bus"; + compatible = "ti,omap4-l4-per", "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l4_per_clkctrl OMAP4_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -1298,7 +1303,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2437,7 +2442,7 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00150000 0x00350000 0x001000>, /* ap 77 */ diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 72e4f6481776..2bbff9032be3 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -22,6 +22,11 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -54,14 +59,12 @@ }; /* - * Note that 4430 needs cross trigger interface (CTI) supported - * before we can configure the interrupts. This means sampling - * events are not supported for pmu. Note that 4460 does not use - * CTI, see also 4460.dtsi. + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. */ - pmu { - compatible = "arm,cortex-a9-pmu"; - ti,hwmods = "debugss"; + ocmcram: sram@40304000 { + compatible = "mmio-sram"; + reg = <0x40304000 0xa000>; /* 40k */ }; gic: interrupt-controller@48241000 { @@ -97,19 +100,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -117,16 +107,23 @@ * hierarchy. */ ocp { - compatible = "ti,omap4-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_l4per>; + clocks = <&l3_1_clkctrl OMAP4_L3_MAIN_1_CLKCTRL 0>, + <&l3_2_clkctrl OMAP4_L3_MAIN_2_CLKCTRL 0>, + <&l3_instr_clkctrl OMAP4_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges; - ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0x44000000 0x1000>, - <0x44800000 0x2000>, - <0x45000000 0x1000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap4-l3-noc"; + reg = <0x44000000 0x1000>, + <0x44800000 0x2000>, + <0x45000000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4a300000 { }; @@ -137,12 +134,22 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpuss_clkctrl OMAP4_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40304000 { - compatible = "mmio-sram"; - reg = <0x40304000 0xa000>; /* 40k */ + l4_abe: interconnect@40100000 { }; target-module@50000000 { @@ -184,7 +191,6 @@ target-module@52000000 { compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "iss"; reg = <0x52000000 0x4>, <0x52000010 0x4>; reg-names = "rev", "sysc"; @@ -198,6 +204,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; ti,sysc-delay-us = <2>; + power-domains = <&prm_cam>; clocks = <&iss_clkctrl OMAP4_ISS_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -207,6 +214,26 @@ /* No child device binding, driver in staging */ }; + /* + * Note that 4430 needs cross trigger interface (CTI) supported + * before we can configure the interrupts. This means sampling + * events are not supported for pmu. Note that 4460 does not use + * CTI, see also 4460.dtsi. + */ + target-module@54000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_emu>; + clocks = <&emu_sys_clkctrl OMAP4_DEBUGSS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x54000000 0x1000000>; + + pmu: pmu { + compatible = "arm,cortex-a9-pmu"; + }; + }; + target-module@55082000 { compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0x55082000 0x4>, @@ -256,35 +283,67 @@ /* No child device binding or driver in mainline */ }; - dmm@4e000000 { - compatible = "ti,omap4-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap4-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d"; - reg = <0x4c000000 0x100>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d"; - reg = <0x4d000000 0x100>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <1>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&l3_emif_clkctrl OMAP4_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d"; + reg = <0 0x100>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; dsp: dsp { @@ -435,6 +494,7 @@ <SYSC_IDLE_NO>, <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_gfx>; clocks = <&l3_gfx_clkctrl OMAP4_GPU_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 2d3e54901b6e..3d6db1db94e0 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -26,13 +26,6 @@ }; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - ti,hwmods = "debugss"; - }; - thermal-zones { #include "omap4-cpu-thermal.dtsi" }; @@ -128,4 +121,10 @@ <0x00030000 0x00030000 0x00010000>; }; +&pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; +}; + /include/ "omap446x-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap44xx-clocks.dtsi b/arch/arm/boot/dts/omap44xx-clocks.dtsi index 532868591107..1f1c04d8f472 100644 --- a/arch/arm/boot/dts/omap44xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi @@ -770,14 +770,6 @@ ti,max-div = <2>; }; - sha2md5_fck: sha2md5_fck@15c8 { - #clock-cells = <0>; - compatible = "ti,gate-clock"; - clocks = <&l3_div_ck>; - ti,bit-shift = <1>; - reg = <0x15c8>; - }; - usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi index 887b3359dd5a..b148b289e830 100644 --- a/arch/arm/boot/dts/omap5-l4.dtsi +++ b/arch/arm/boot/dts/omap5-l4.dtsi @@ -1,5 +1,8 @@ &l4_cfg { /* 0x4a000000 */ - compatible = "ti,omap5-l4-cfg", "simple-bus"; + compatible = "ti,omap5-l4-cfg", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4cfg_clkctrl OMAP5_L4_CFG_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x1000>; @@ -15,7 +18,7 @@ <0x00300000 0x4a300000 0x080000>; /* segment 6 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -391,7 +394,7 @@ }; segment@80000 { /* 0x4a080000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00059000 0x000d9000 0x001000>, /* ap 13 */ @@ -654,7 +657,7 @@ }; segment@100000 { /* 0x4a100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00002000 0x00102000 0x001000>, /* ap 59 */ @@ -691,22 +694,44 @@ }; target-module@40000 { /* 0x4a140000, ap 101 16.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; + compatible = "ti,sysc-omap4", "ti,sysc"; + reg = <0x400fc 4>, + <0x41100 4>; + reg-names = "rev", "sysc"; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>, + <SYSC_IDLE_SMART_WKUP>; + power-domains = <&prm_l3init>; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 0>; + clock-names = "fck"; #size-cells = <1>; + #address-cells = <1>; ranges = <0x0 0x40000 0x10000>; + + sata: sata@0 { + compatible = "snps,dwc-ahci"; + reg = <0 0x1100>, <0x1100 0x8>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + phys = <&sata_phy>; + phy-names = "sata-phy"; + clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; + ports-implemented = <0x1>; + }; }; }; segment@180000 { /* 0x4a180000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@200000 { /* 0x4a200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0001e000 0x0021e000 0x001000>, /* ap 29 */ @@ -912,20 +937,23 @@ }; segment@280000 { /* 0x4a280000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; segment@300000 { /* 0x4a300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_per { /* 0x48000000 */ - compatible = "ti,omap5-l4-per", "simple-bus"; + compatible = "ti,omap5-l4-per", "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l4per_clkctrl OMAP5_L4_PER_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -939,7 +967,7 @@ <0x00200000 0x48200000 0x200000>; /* segment 1 */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2148,14 +2176,17 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; }; }; &l4_wkup { /* 0x4ae00000 */ - compatible = "ti,omap5-l4-wkup", "simple-bus"; + compatible = "ti,omap5-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkupaon>; + clocks = <&wkupaon_clkctrl OMAP5_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4ae00000 0x800>, <0x4ae00800 0x800>, <0x4ae01000 0x1000>; @@ -2167,7 +2198,7 @@ <0x00020000 0x4ae20000 0x010000>; /* segment 2 */ segment@0 { /* 0x4ae00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -2296,7 +2327,7 @@ }; segment@10000 { /* 0x4ae10000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */ @@ -2423,7 +2454,7 @@ }; segment@20000 { /* 0x4ae20000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */ diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index e025b7c9a357..bac6fa838793 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -25,6 +25,11 @@ i2c2 = &i2c3; i2c3 = &i2c4; i2c4 = &i2c5; + mmc0 = &mmc1; + mmc1 = &mmc2; + mmc2 = &mmc3; + mmc3 = &mmc4; + mmc4 = &mmc5; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -101,6 +106,15 @@ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; }; + /* + * Needed early by omap4_sram_init() for barrier, do not move to l3 + * interconnect as simple-pm-bus probes at module_init() time. + */ + ocmcram: sram@40300000 { + compatible = "mmio-sram"; + reg = <0 0x40300000 0 0x20000>; /* 128k */ + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; @@ -121,19 +135,6 @@ }; /* - * The soc node represents the soc top level view. It is used for IPs - * that are not memory mapped in the MPU view or for the MPU itself. - */ - soc { - compatible = "ti,omap-infra"; - mpu { - compatible = "ti,omap4-mpu"; - ti,hwmods = "mpu"; - sram = <&ocmcram>; - }; - }; - - /* * XXX: Use a flat representation of the OMAP3 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for @@ -141,17 +142,24 @@ * hierarchy. */ ocp { - compatible = "ti,omap5-l3-noc", "simple-bus"; + compatible = "simple-pm-bus"; + power-domains = <&prm_core>; + clocks = <&l3main1_clkctrl OMAP5_L3_MAIN_1_CLKCTRL 0>, + <&l3main2_clkctrl OMAP5_L3_MAIN_2_CLKCTRL 0>, + <&l3instr_clkctrl OMAP5_L3_MAIN_3_CLKCTRL 0>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xc0000000>; dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>; - ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - reg = <0 0x44000000 0 0x2000>, - <0 0x44800000 0 0x3000>, - <0 0x45000000 0 0x4000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + l3-noc@44000000 { + compatible = "ti,omap5-l3-noc"; + reg = <0x44000000 0x2000>, + <0x44800000 0x3000>, + <0x45000000 0x4000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; l4_wkup: interconnect@4ae00000 { }; @@ -162,31 +170,58 @@ l4_per: interconnect@48000000 { }; - l4_abe: interconnect@40100000 { + target-module@48210000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl OMAP5_MPU_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x48210000 0x1f0000>; + + mpu { + compatible = "ti,omap4-mpu"; + sram = <&ocmcram>; + }; }; - ocmcram: sram@40300000 { - compatible = "mmio-sram"; - reg = <0x40300000 0x20000>; /* 128k */ + l4_abe: interconnect@40100000 { }; - gpmc: gpmc@50000000 { - compatible = "ti,omap4430-gpmc"; - reg = <0x50000000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&sdma 4>; - dma-names = "rxtx"; - gpmc,num-cs = <8>; - gpmc,num-waitpins = <4>; - ti,hwmods = "gpmc"; - clocks = <&l3_iclk_div>; + target-module@50000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x50000000 4>, + <0x50000010 4>, + <0x50000014 4>; + reg-names = "rev", "sysc", "syss"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,syss-mask = <1>; + ti,no-idle-on-init; + clocks = <&l3main2_clkctrl OMAP5_L3_MAIN_2_GPMC_CLKCTRL 0>; clock-names = "fck"; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x50000000 0x50000000 0x00001000>, /* regs */ + <0x00000000 0x00000000 0x40000000>; /* data */ + + gpmc: gpmc@50000000 { + compatible = "ti,omap4430-gpmc"; + reg = <0x50000000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 4>; + dma-names = "rxtx"; + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + clock-names = "fck"; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; }; target-module@55082000 { @@ -241,35 +276,67 @@ status = "disabled"; }; - dmm@4e000000 { - compatible = "ti,omap5-dmm"; - reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; - ti,hwmods = "dmm"; + target-module@4e000000 { + compatible = "ti,sysc-omap2", "ti,sysc"; + reg = <0x4e000000 0x4>, + <0x4e000010 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ranges = <0x0 0x4e000000 0x2000000>; + #size-cells = <1>; + #address-cells = <1>; + + dmm@0 { + compatible = "ti,omap5-dmm"; + reg = <0 0x800>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; }; - emif1: emif@4c000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif1"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4c000000 0x400>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4c000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4c000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF1_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4c000000 0x1000000>; + + emif1: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; - emif2: emif@4d000000 { - compatible = "ti,emif-4d5"; - ti,hwmods = "emif2"; - ti,no-idle-on-init; - phy-type = <2>; /* DDR PHY type: Intelli PHY */ - reg = <0x4d000000 0x400>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - hw-caps-read-idle-ctrl; - hw-caps-ll-interface; - hw-caps-temp-alert; + target-module@4d000000 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + reg = <0x4d000000 0x4>; + reg-names = "rev"; + clocks = <&emif_clkctrl OMAP5_EMIF2_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x4d000000 0x1000000>; + + emif2: emif@0 { + compatible = "ti,emif-4d5"; + reg = <0 0x400>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; }; aes1_target: target-module@4b501000 { @@ -369,18 +436,6 @@ #thermal-sensor-cells = <1>; }; - /* OCP2SCP3 */ - sata: sata@4a141100 { - compatible = "snps,dwc-ahci"; - reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - phys = <&sata_phy>; - phy-names = "sata-phy"; - clocks = <&l3init_clkctrl OMAP5_SATA_CLKCTRL 8>; - ti,hwmods = "sata"; - ports-implemented = <0x1>; - }; - target-module@56000000 { compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x5600fe00 0x4>, diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts index ff91561ca99c..b8c5db2344aa 100644 --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts @@ -2,7 +2,7 @@ /* * Roseapple Pi * - * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + * Copyright (C) 2020-2021 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> */ /dts-v1/; @@ -27,20 +27,140 @@ reg = <0x0 0x80000000>; /* 2GB */ }; - /* Fixed regulator used in the absence of PMIC */ - sd_vcc: sd-vcc { + syspwr: regulator-5v0 { compatible = "regulator-fixed"; - regulator-name = "fixed-3.1V"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; + regulator-name = "SYSPWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; regulator-always-on; }; }; +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + &i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; + + atc260x: pmic@65 { + compatible = "actions,atc2603c"; + reg = <0x65>; + interrupt-parent = <&sirq>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + + reset-time-sec = <6>; + + regulators { + compatible = "actions,atc2603c-regulator"; + + dcdc1-supply = <&syspwr>; + dcdc2-supply = <&syspwr>; + dcdc3-supply = <&syspwr>; + ldo1-supply = <&syspwr>; + ldo2-supply = <&syspwr>; + ldo3-supply = <&syspwr>; + ldo5-supply = <&syspwr>; + ldo6-supply = <&syspwr>; + ldo7-supply = <&syspwr>; + ldo8-supply = <&syspwr>; + ldo11-supply = <&syspwr>; + ldo12-supply = <&syspwr>; + switchldo1-supply = <&vcc>; + + vdd_cpu: dcdc1 { + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + vddq: dcdc2 { + regulator-name = "VDDQ"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <2150000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc: dcdc3 { + regulator-name = "VCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_3v3: ldo1 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + avcc: ldo2 { + regulator-name = "AVCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8: ldo3 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vcc_3v1: ldo5 { + regulator-name = "VCC_3V1"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + + avdd: ldo6 { + regulator-name = "AVDD"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + sens_1v8: ldo7 { + regulator-name = "SENS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8: ldo8 { + regulator-name = "LDO8"; + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3300000>; + }; + + svcc: ldo11 { + regulator-name = "SVCC"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + rtc_vdd: ldo12 { + regulator-name = "RTC_VDD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + sd_vcc: switchldo1 { + regulator-name = "SD_VCC"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; }; &i2c1 { diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 7bf1da916f25..ff1bdb10ad19 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -480,7 +480,7 @@ status = "disabled"; }; - nand: qpic-nand@79b0000 { + nand: nand-controller@79b0000 { compatible = "qcom,ipq4019-nand"; reg = <0x79b0000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 0cda654371ae..30ee913faae6 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -529,6 +529,10 @@ pinctrl-names = "default"; pinctrl-0 = <&mpu6515_pin>; + mount-matrix = "0", "-1", "0", + "-1", "0", "0", + "0", "0", "1"; + i2c-gate { #address-cells = <1>; #size-cells = <0>; @@ -575,7 +579,7 @@ maxim,rcomp = /bits/ 8 <0x4d>; interrupt-parent = <&msmgpio>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fuelgauge_pin>; diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index a0f7f461f48c..d737de7173cf 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -322,6 +322,27 @@ status = "okay"; }; + /* blsp2_uart8 */ + serial@f995e000 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart8_pins_active>; + pinctrl-1 = <&blsp2_uart8_pins_sleep>; + + bluetooth { + compatible = "brcm,bcm43540-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + device-wakeup-gpios = <&msmgpio 91 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&msmgpio>; + interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -356,6 +377,35 @@ }; pinctrl@fd510000 { + blsp2_uart8_pins_active: blsp2-uart8-pins-active { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "blsp_uart8"; + drive-strength = <8>; + bias-disable; + }; + + blsp2_uart8_pins_sleep: blsp2-uart8-pins-sleep { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + bt_pins: bt-pins { + hostwake { + pins = "gpio75"; + function = "gpio"; + drive-strength = <16>; + input-enable; + }; + + devwake { + pins = "gpio91"; + function = "gpio"; + drive-strength = <2>; + }; + }; + sdhc1_pin_a: sdhc1-pin-active { clk { pins = "sdc1_clk"; @@ -717,7 +767,7 @@ maxim,rcomp = /bits/ 8 <0x56>; interrupt-parent = <&pma8084_gpios>; - interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fuelgauge_pin>; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index c65d33591efa..db4c06bf7888 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -715,6 +715,15 @@ status = "disabled"; }; + blsp2_uart8: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp2_uart10: serial@f9960000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf9960000 0x1000>; diff --git a/arch/arm/boot/dts/qcom-sdx55-t55.dts b/arch/arm/boot/dts/qcom-sdx55-t55.dts new file mode 100644 index 000000000000..ddcd53aa533d --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55-t55.dts @@ -0,0 +1,281 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcom-sdx55.dtsi" +#include "qcom-pmx55.dtsi" + +/ { + model = "Thundercomm T55 Development Kit"; + compatible = "qcom,sdx55-t55", "qcom,sdx55"; + qcom,board-id = <0xb010008 0x4>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0xf800000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; + + vreg_sd_vdd: sd-vdd { + compatible = "regulator-fixed"; + regulator-name = "vreg_sd_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + vin-supply = <&vreg_vddpx_2>; + }; + + vreg_vddpx_2: vddpx-2 { + compatible = "regulator-gpio"; + regulator-name = "vreg_vddpx_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + states = <1800000 0>, <2850000 1>; + startup-delay-us = <200000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmx55-rpmh-regulators { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "ok"; +}; + +&qpic_bam { + status = "ok"; +}; + +&qpic_nand { + status = "ok"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* efs2 partition is secured */ + secure-regions = <0x500000 0xb00000>; + }; +}; + +&remoteproc_mpss { + status = "okay"; + memory-region = <&mpss_adsp_mem>; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts new file mode 100644 index 000000000000..3065f84634b8 --- /dev/null +++ b/arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "qcom-sdx55.dtsi" +#include "qcom-pmx55.dtsi" + +/ { + model = "Telit FN980 TLB"; + compatible = "qcom,sdx55-telit-fn980-tlb", "qcom,sdx55"; + qcom,board-id = <0xb010008 0x0>; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mpss_debug_mem: memory@8ef00000 { + no-map; + reg = <0x8ef00000 0x800000>; + }; + + ipa_fw_mem: memory@8fced000 { + no-map; + reg = <0x8fced000 0x10000>; + }; + + mpss_adsp_mem: memory@90800000 { + no-map; + reg = <0x90800000 0xf800000>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_bob_3p3: pmx55-bob { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob_3p3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + vreg_s7e_mx_0p752: pmx55-s7e { + compatible = "regulator-fixed"; + regulator-name = "vreg_s7e_mx_0p752"; + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + + vin-supply = <&vph_pwr>; + }; + + vreg_sd_vdd: sd-vdd { + compatible = "regulator-fixed"; + regulator-name = "vreg_sd_vdd"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + vin-supply = <&vreg_vddpx_2>; + }; + + vreg_vddpx_2: vddpx-2 { + compatible = "regulator-gpio"; + regulator-name = "vreg_vddpx_2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; + states = <1800000 0>, <2850000 1>; + startup-delay-us = <200000>; + enable-active-high; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmx55-rpmh-regulators { + compatible = "qcom,pmx55-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-l1-l2-supply = <&vreg_s2e_1p224>; + vdd-l3-l9-supply = <&vreg_s3e_0p824>; + vdd-l4-l12-supply = <&vreg_s4e_1p904>; + vdd-l5-l6-supply = <&vreg_s4e_1p904>; + vdd-l7-l8-supply = <&vreg_s3e_0p824>; + vdd-l10-l11-l13-supply = <&vreg_bob_3p3>; + vdd-l14-supply = <&vreg_s7e_mx_0p752>; + vdd-l15-supply = <&vreg_s2e_1p224>; + vdd-l16-supply = <&vreg_s4e_1p904>; + + vreg_s2e_1p224: smps2 { + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1400000>; + }; + + vreg_s3e_0p824: smps3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_s4e_1p904: smps4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1960000>; + }; + + vreg_l1e_bb_1p2: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo2 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo3 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l4e_bb_0p875: ldo4 { + regulator-min-microvolt = <872000>; + regulator-max-microvolt = <872000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l5e_bb_1p7: ldo5 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo7 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo8 { + regulator-min-microvolt = <480000>; + regulator-max-microvolt = <900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo9 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + vreg_l10e_3p1: ldo10 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo11 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo13 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <2928000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo14 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo15 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + + ldo16 { + regulator-min-microvolt = <1704000>; + regulator-max-microvolt = <1904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; + }; + }; +}; + +&blsp1_uart3 { + status = "ok"; +}; + +&qpic_bam { + status = "ok"; +}; + +&qpic_nand { + status = "ok"; + + nand@0 { + reg = <0>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-bus-width = <8>; + /* ico and efs2 partitions are secured */ + secure-regions = <0x500000 0x500000 + 0xa00000 0xb00000>; + }; +}; + +&remoteproc_mpss { + status = "okay"; + memory-region = <&mpss_adsp_mem>; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4e_bb_0p875>; + vdda33-supply = <&vreg_l10e_3p1>; + vdda18-supply = <&vreg_l5e_bb_1p7>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4e_bb_0p875>; + vdda-pll-supply = <&vreg_l1e_bb_1p2>; +}; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index e4180bbc4655..0057c7c04d31 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx55.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/interconnect/qcom,sdx55.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -53,6 +54,41 @@ compatible = "arm,cortex-a7"; reg = <0x0>; enable-method = "psci"; + clocks = <&apcs>; + power-domains = <&rpmhpd SDX55_CX>; + power-domain-names = "rpmhpd"; + operating-points-v2 = <&cpu_opp_table>; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-345600000 { + opp-hz = /bits/ 64 <345600000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-sdx55", "qcom,scm"; }; }; @@ -119,6 +155,37 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-mpss { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apcs 14>; + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + modem_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + modem_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ipa_smp2p_out: ipa-ap-to-modem { + qcom,entry-name = "ipa"; + #qcom,smem-state-cells = <1>; + }; + + ipa_smp2p_in: ipa-modem-to-ap { + qcom,entry-name = "ipa"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -187,6 +254,34 @@ }; }; + mc_virt: interconnect@1100000 { + compatible = "qcom,sdx55-mc-virt"; + reg = <0x01100000 0x400000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + mem_noc: interconnect@9680000 { + compatible = "qcom,sdx55-mem-noc"; + reg = <0x09680000 0x40000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + system_noc: interconnect@162c000 { + compatible = "qcom,sdx55-system-noc"; + reg = <0x0162c000 0x31200>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + + ipa_virt: interconnect@1e00000 { + compatible = "qcom,sdx55-ipa-virt"; + reg = <0x01e00000 0x100000>; + #interconnect-cells = <1>; + qcom,bcm-voters = <&apps_bcm_voter>; + }; + qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -199,7 +294,7 @@ status = "disabled"; }; - qpic_nand: nand@1b30000 { + qpic_nand: nand-controller@1b30000 { compatible = "qcom,sdx55-nand"; reg = <0x01b30000 0x10000>; #address-cells = <1>; @@ -215,6 +310,47 @@ status = "disabled"; }; + ipa: ipa@1e40000 { + compatible = "qcom,sdx55-ipa"; + + iommus = <&apps_smmu 0x5e0 0x0>, + <&apps_smmu 0x5e2 0x0>; + reg = <0x1e40000 0x7000>, + <0x1e50000 0x4b20>, + <0x1e04000 0x2c000>; + reg-names = "ipa-reg", + "ipa-shared", + "gsi"; + + interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ipa", + "gsi", + "ipa-clock-query", + "ipa-setup-ready"; + + clocks = <&rpmhcc RPMH_IPA_CLK>; + clock-names = "core"; + + interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>, + <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>, + <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, + <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; + interconnect-names = "memory-a", + "memory-b", + "imem", + "config"; + + qcom,smem-states = <&ipa_smp2p_out 0>, + <&ipa_smp2p_out 1>; + qcom,smem-state-names = "ipa-clock-enabled-valid", + "ipa-clock-enabled"; + + status = "disabled"; + }; + tcsr_mutex: hwlock@1f40000 { compatible = "qcom,tcsr-mutex"; reg = <0x01f40000 0x40000>; @@ -233,6 +369,39 @@ status = "disabled"; }; + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sdx55-mpss-pas"; + reg = <0x04080000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd SDX55_CX>, + <&rpmhpd SDX55_MSS>; + power-domain-names = "cx", "mss"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 114 IRQ_TYPE_EDGE_RISING>; + label = "mpss"; + qcom,remote-pid = <1>; + mboxes = <&apcs 15>; + }; + }; + usb: usb@a6f8800 { compatible = "qcom,sdx55-dwc3", "qcom,dwc3"; reg = <0x0a6f8800 0x400>; @@ -319,6 +488,21 @@ #interrupt-cells = <2>; }; + imem@1468f000 { + compatible = "simple-mfd"; + reg = <0x1468f000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x0 0x1468f000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0x200>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdx55-smmu-500", "arm,mmu-500"; reg = <0x15000000 0x20000>; @@ -352,6 +536,23 @@ <0x17802000 0x1000>; }; + a7pll: clock@17808000 { + compatible = "qcom,sdx55-a7pll"; + reg = <0x17808000 0x1000>; + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "bi_tcxo"; + #clock-cells = <0>; + }; + + apcs: mailbox@17810000 { + compatible = "qcom,sdx55-apcs-gcc", "syscon"; + reg = <0x17810000 0x2000>; + #mbox-cells = <1>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&a7pll>, <&gcc GPLL0>; + clock-names = "ref", "pll", "aux"; + #clock-cells = <0>; + }; + watchdog@17817000 { compatible = "qcom,apss-wdt-sdx55", "qcom,kpss-wdt"; reg = <0x17817000 0x1000>; @@ -491,6 +692,10 @@ }; }; }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; }; }; diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts b/arch/arm/boot/dts/r7s9210-rza2mevb.dts index d062d02865e7..68498ce2aec0 100644 --- a/arch/arm/boot/dts/r7s9210-rza2mevb.dts +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts @@ -4,6 +4,28 @@ * * Copyright (C) 2018 Renesas Electronics * + * As upstream Linux does not support XIP, it cannot run in 8 MiB of HyperRAM. + * Hence the 64 MiB of SDRAM on the sub-board needs to be enabled, which has + * the following ramifications: + * - SCIF4 connected to the on-board USB-serial can no longer be used as the + * serial console, + * - Instead, SCIF2 is used as the serial console, by connecting a 3.3V TTL + * USB-to-Serial adapter to the CMOS camera connector: + * - RXD = CN17-9, + * - TXD = CN17-10, + * - GND = CN17-2 or CN17-17, + * - The first Ethernet channel can no longer be used, + * - USB Channel 1 loses the overcurrent input signal. + * + * Please make sure your sub-board matches the following switch settings: + * + * SW6 SW6-1 set to SDRAM + * ON SW6-2 set to Audio + * +---------------------+ SW6-3 set to DRP + * | = = = = = | SW6-4 set to CEU + * | = = | SW6-5 set to Ether2 + * | 1 2 3 4 5 6 7 8 9 0 | SW6-6 set to VDC6 + * +---------------------+ SW6-7 set to VDC6 */ /dts-v1/; @@ -17,9 +39,8 @@ compatible = "renesas,rza2mevb", "renesas,r7s9210"; aliases { - serial0 = &scif4; - ethernet0 = ðer0; - ethernet1 = ðer1; + serial0 = &scif2; + ethernet0 = ðer1; }; chosen { @@ -58,9 +79,9 @@ }; }; - memory@40000000 { + memory@c000000 { device_type = "memory"; - reg = <0x40000000 0x00800000>; /* HyperRAM */ + reg = <0x0c000000 0x04000000>; /* SDRAM */ }; }; @@ -72,17 +93,6 @@ status = "okay"; }; -ðer0 { - pinctrl-names = "default"; - pinctrl-0 = <ð0_pins>; - status = "okay"; - renesas,no-ether-link; - phy-handle = <&phy0>; - phy0: ethernet-phy@0 { - reg = <0>; - }; -}; - ðer1 { pinctrl-names = "default"; pinctrl-0 = <ð1_pins>; @@ -142,9 +152,9 @@ }; /* Serial Console */ - scif4_pins: serial4 { - pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ - <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ + scif2_pins: serial2 { + pinmux = <RZA2_PINMUX(PORTE, 2, 3)>, /* TxD2 */ + <RZA2_PINMUX(PORTE, 1, 3)>; /* RxD2 */ }; sdhi0_pins: sdhi0 { @@ -165,8 +175,7 @@ usb1_pins: usb1 { pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ - <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ - <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + <RZA2_PINMUX(PORTC, 5, 1)>; /* VBUSEN1 */ }; }; @@ -176,9 +185,9 @@ }; /* Serial Console */ -&scif4 { +&scif2 { pinctrl-names = "default"; - pinctrl-0 = <&scif4_pins>; + pinctrl-0 = <&scif2_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts index 98c3fbd89fa6..2bcb229844ab 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts @@ -91,92 +91,20 @@ status = "okay"; }; -&i2c0 { - ov5640@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - clocks = <&mclk_cam1>; - clock-names = "xclk"; - - port { - ov5640_0: endpoint { - bus-width = <8>; - data-shift = <2>; - bus-type = <6>; - pclk-sample = <1>; - remote-endpoint = <&vin0ep>; - }; - }; - }; -}; - &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; - status = "okay"; + /* status set to "okay" when needed by camera configuration below */ clock-frequency = <400000>; - - ov5640@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - clocks = <&mclk_cam2>; - clock-names = "xclk"; - - port { - ov5640_1: endpoint { - bus-width = <8>; - data-shift = <2>; - bus-type = <6>; - pclk-sample = <1>; - remote-endpoint = <&vin1ep>; - }; - }; - }; -}; - -&i2c2 { - ov5640@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - clocks = <&mclk_cam3>; - clock-names = "xclk"; - - port { - ov5640_2: endpoint { - bus-width = <8>; - data-shift = <2>; - bus-type = <6>; - pclk-sample = <1>; - remote-endpoint = <&vin2ep>; - }; - }; - }; }; &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; - status = "okay"; + /* status set to "okay" when needed by camera configuration below */ clock-frequency = <400000>; - - ov5640@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - clocks = <&mclk_cam4>; - clock-names = "xclk"; - - port { - ov5640_3: endpoint { - bus-width = <8>; - data-shift = <2>; - bus-type = <6>; - pclk-sample = <1>; - remote-endpoint = <&vin3ep>; - }; - }; - }; }; &pfc { @@ -267,6 +195,22 @@ cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; }; +/* + * Below configuration ties VINx endpoints to ov5640/ov7725 camera endpoints + * + * (un)comment the #include statements to change configuration + */ + +/* 8bit CMOS Camera 1 (J13) */ +#define CAM_PARENT_I2C i2c0 +#define MCLK_CAM mclk_cam1 +#define CAM_EP cam0ep +#define VIN_EP vin0ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED &vin0 { /* * Set SW2 switch on the SOM to 'ON' @@ -278,13 +222,29 @@ port { vin0ep: endpoint { - remote-endpoint = <&ov5640_0>; + remote-endpoint = <&cam0ep>; bus-width = <8>; bus-type = <6>; }; }; }; - +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 2 (J14) */ +#define CAM_PARENT_I2C i2c1 +#define MCLK_CAM mclk_cam2 +#define CAM_EP cam1ep +#define VIN_EP vin1ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED &vin1 { /* Set SW1 switch on the SOM to 'ON' */ status = "okay"; @@ -293,13 +253,30 @@ port { vin1ep: endpoint { - remote-endpoint = <&ov5640_1>; + remote-endpoint = <&cam1ep>; bus-width = <8>; bus-type = <6>; }; }; }; +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 3 (J12) */ +#define CAM_PARENT_I2C i2c2 +#define MCLK_CAM mclk_cam3 +#define CAM_EP cam2ep +#define VIN_EP vin2ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED &vin2 { status = "okay"; pinctrl-0 = <&vin2_pins>; @@ -307,14 +284,30 @@ port { vin2ep: endpoint { - remote-endpoint = <&ov5640_2>; + remote-endpoint = <&cam2ep>; bus-width = <8>; data-shift = <8>; bus-type = <6>; }; }; }; - +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP + +/* 8bit CMOS Camera 4 (J11) */ +#define CAM_PARENT_I2C i2c3 +#define MCLK_CAM mclk_cam4 +#define CAM_EP cam3ep +#define VIN_EP vin3ep +#undef CAM_ENABLED +#include "r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi" +//#include "r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi" + +#ifdef CAM_ENABLED &vin3 { status = "okay"; pinctrl-0 = <&vin3_pins>; @@ -322,9 +315,15 @@ port { vin3ep: endpoint { - remote-endpoint = <&ov5640_3>; + remote-endpoint = <&cam3ep>; bus-width = <8>; bus-type = <6>; }; }; }; +#endif /* CAM_ENABLED */ + +#undef CAM_PARENT_I2C +#undef MCLK_CAM +#undef CAM_EP +#undef VIN_EP diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi new file mode 100644 index 000000000000..70c72ba4fe72 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov5640-single.dtsi @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file ties a VIN interface with a single ov5640 sensor on + * the iWave-RZ/G1H Qseven board development platform connected with the + * camera daughter board. + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#define CAM_ENABLED 1 + +&CAM_PARENT_I2C { + status = "okay"; + + ov5640@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + clocks = <&MCLK_CAM>; + clock-names = "xclk"; + status = "okay"; + + port { + CAM_EP: endpoint { + bus-width = <8>; + data-shift = <2>; + bus-type = <6>; + pclk-sample = <1>; + remote-endpoint = <&VIN_EP>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi new file mode 100644 index 000000000000..f5e77f024251 --- /dev/null +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ov7725-single.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This include file ties a VIN interface with a single ov7725 sensor on + * the iWave-RZ/G1H Qseven board development platform connected with the + * camera daughter board. + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#define CAM_ENABLED 1 + +&CAM_PARENT_I2C { + status = "okay"; + + ov7725@21 { + compatible = "ovti,ov7725"; + reg = <0x21>; + clocks = <&MCLK_CAM>; + status = "okay"; + + port { + CAM_EP: endpoint { + bus-width = <8>; + bus-type = <6>; + remote-endpoint = <&VIN_EP>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts index 0063ef92f50e..94bf8a116b52 100644 --- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts @@ -387,8 +387,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi4 &src4 &dvc1>; - capture = <&ssi3 &src3 &dvc0>; + playback = <&ssi4>, <&src4>, <&dvc1>; + capture = <&ssi3>, <&src3>, <&dvc0>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi index 6a78c813057b..dd1b976d2a6c 100644 --- a/arch/arm/boot/dts/r8a7742.dtsi +++ b/arch/arm/boot/dts/r8a7742.dtsi @@ -367,13 +367,13 @@ apmu@e6151000 { compatible = "renesas,r8a7742-apmu", "renesas,apmu"; reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; + cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; apmu@e6152000 { compatible = "renesas,r8a7742-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts index 807e7d0d6b62..4ace117470e8 100644 --- a/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +++ b/arch/arm/boot/dts/r8a7743-sk-rzg1m.dts @@ -61,7 +61,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index f444e418f408..6e37b8da278b 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -293,7 +293,7 @@ apmu@e6152000 { compatible = "renesas,r8a7743-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi index 0442aad4f9db..ace20861c0c4 100644 --- a/arch/arm/boot/dts/r8a7744.dtsi +++ b/arch/arm/boot/dts/r8a7744.dtsi @@ -293,7 +293,7 @@ apmu@e6152000 { compatible = "renesas,r8a7744-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts index 1c7b37a01f0a..73bd62d8a929 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts @@ -289,8 +289,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi3 &src3 &dvc0>; - capture = <&ssi4 &src4 &dvc1>; + playback = <&ssi3>, <&src3>, <&dvc0>; + capture = <&ssi4>, <&src4>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts index db72a801abe5..59d1a9bfab05 100644 --- a/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +++ b/arch/arm/boot/dts/r8a7745-sk-rzg1e.dts @@ -56,7 +56,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi index 0f14ac22921d..be33bdabe452 100644 --- a/arch/arm/boot/dts/r8a7745.dtsi +++ b/arch/arm/boot/dts/r8a7745.dtsi @@ -258,7 +258,7 @@ apmu@e6151000 { compatible = "renesas,r8a7745-apmu", "renesas,apmu"; reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 691b1a131c87..a1d7f6e7a2e3 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -205,7 +205,7 @@ apmu@e6151000 { compatible = "renesas,r8a77470-apmu", "renesas,apmu"; reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 09a152b91557..2dad0742d2ba 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -53,6 +53,9 @@ i2c11 = &i2cexio1; i2c12 = &i2chdmi; i2c13 = &i2cpwr; + mmc0 = &mmcif1; + mmc1 = &sdhi0; + mmc2 = &sdhi2; }; chosen { @@ -659,7 +662,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -908,7 +911,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ @@ -918,8 +921,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7790-stout.dts b/arch/arm/boot/dts/r8a7790-stout.dts index 6a457bc9280a..d51f23572d7f 100644 --- a/arch/arm/boot/dts/r8a7790-stout.dts +++ b/arch/arm/boot/dts/r8a7790-stout.dts @@ -191,7 +191,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -321,7 +321,7 @@ &iic3 { pinctrl-names = "default"; - pinctrl-0 = <&iic3_pins &pmic_irq_pins>; + pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>; status = "okay"; pmic@58 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index b0569b4ea5c8..de29394eed63 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -381,13 +381,13 @@ apmu@e6151000 { compatible = "renesas,r8a7790-apmu", "renesas,apmu"; reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; + cpus = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; }; apmu@e6152000 { compatible = "renesas,r8a7790-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; + cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index f603cba5441f..61e881bbbf6e 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -53,6 +53,9 @@ i2c12 = &i2cexio1; i2c13 = &i2chdmi; i2c14 = &i2cexio4; + mmc0 = &sdhi0; + mmc1 = &sdhi1; + mmc2 = &sdhi2; }; chosen { @@ -78,6 +81,9 @@ keyboard { compatible = "gpio-keys"; + pinctrl-0 = <&sw2_pins>; + pinctrl-names = "default"; + key-1 { gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_1>; @@ -615,10 +621,15 @@ groups = "audio_clk_a"; function = "audio_clk"; }; + + sw2_pins: sw2 { + pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3"; + bias-pull-up; + }; }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -878,7 +889,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ @@ -888,8 +899,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c6d563fb7ec7..c6ef636965c1 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -28,6 +28,8 @@ serial0 = &scif0; i2c9 = &gpioi2c2; i2c10 = &i2chdmi; + mmc0 = &sdhi0; + mmc1 = &sdhi2; }; chosen { @@ -292,7 +294,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -494,7 +496,7 @@ }; &rcar_sound { - pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 87f0d6dc3e5a..9d8320f71a6a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -315,7 +315,7 @@ apmu@e6152000 { compatible = "renesas,r8a7791-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts index 9368ac2cf508..c100ae903a46 100644 --- a/arch/arm/boot/dts/r8a7792-blanche.dts +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -334,7 +334,7 @@ }; &du { - pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-0 = <&du0_pins>, <&du1_pins>; pinctrl-names = "default"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&x1_clk>, <&x2_clk>; diff --git a/arch/arm/boot/dts/r8a7792-wheat.dts b/arch/arm/boot/dts/r8a7792-wheat.dts index ba2d2a589012..434e4655be9d 100644 --- a/arch/arm/boot/dts/r8a7792-wheat.dts +++ b/arch/arm/boot/dts/r8a7792-wheat.dts @@ -307,7 +307,7 @@ }; &du { - pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-0 = <&du0_pins>, <&du1_pins>; pinctrl-names = "default"; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&osc2_clk>; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi index f5b299bfcb23..253e8bf643d1 100644 --- a/arch/arm/boot/dts/r8a7792.dtsi +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -314,7 +314,7 @@ apmu@e6152000 { compatible = "renesas,r8a7792-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index abf487e8fe0f..87fa57a99399 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -49,6 +49,9 @@ i2c10 = &gpioi2c4; i2c11 = &i2chdmi; i2c12 = &i2cexio4; + mmc0 = &sdhi0; + mmc1 = &sdhi1; + mmc2 = &sdhi2; }; chosen { @@ -576,7 +579,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -751,7 +754,7 @@ }; &rcar_sound { - pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; pinctrl-names = "default"; /* Single DAI */ @@ -761,8 +764,8 @@ rcar_sound,dai { dai0 { - playback = <&ssi0 &src2 &dvc0>; - capture = <&ssi1 &src3 &dvc1>; + playback = <&ssi0>, <&src2>, <&dvc0>; + capture = <&ssi1>, <&src3>, <&dvc1>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index f930f69f7bcc..6d74475030ed 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -290,7 +290,7 @@ apmu@e6152000 { compatible = "renesas,r8a7793-apmu", "renesas,apmu"; reg = <0 0xe6152000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 3f1cc5bbf329..f9dba5688d3f 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -19,6 +19,9 @@ i2c10 = &gpioi2c4; i2c11 = &i2chdmi; i2c12 = &i2cexio4; + mmc0 = &mmcif0; + mmc1 = &sdhi0; + mmc2 = &sdhi1; }; chosen { @@ -330,7 +333,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 677596f6c9c9..eb89a27a6ed0 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -31,6 +31,8 @@ serial0 = &scif2; i2c9 = &gpioi2c1; i2c10 = &i2chdmi; + mmc0 = &mmcif0; + mmc1 = &sdhi1; }; chosen { @@ -379,7 +381,7 @@ }; ðer { - pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-0 = <ðer_pins>, <&phy1_pins>; pinctrl-names = "default"; phy-handle = <&phy1>; @@ -518,7 +520,7 @@ }; &du { - pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-0 = <&du0_pins>, <&du1_pins>; pinctrl-names = "default"; status = "okay"; @@ -541,7 +543,7 @@ }; &rcar_sound { - pinctrl-0 = <&ssi_pins &audio_clk_pins>; + pinctrl-0 = <&ssi_pins>, <&audio_clk_pins>; pinctrl-names = "default"; status = "okay"; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index cd5e2904068a..330dc516ecd1 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -256,7 +256,7 @@ apmu@e6151000 { compatible = "renesas,r8a7794-apmu", "renesas,apmu"; reg = <0 0xe6151000 0 0x188>; - cpus = <&cpu0 &cpu1>; + cpus = <&cpu0>, <&cpu1>; }; rst: reset-controller@e6160000 { diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 47a787a12e55..e24230d50a78 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -355,7 +355,6 @@ reg = <0x20050000 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; status = "disabled"; @@ -366,7 +365,6 @@ reg = <0x20050010 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; status = "disabled"; @@ -377,7 +375,6 @@ reg = <0x20050020 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; status = "disabled"; @@ -388,7 +385,6 @@ reg = <0x20050030 0x10>; #pwm-cells = <2>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index aed879db6c15..69a5e239ed1a 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -8,6 +8,10 @@ model = "Rockchip RK3228 Evaluation board"; compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; + aliases { + mmc0 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts index 350497a3ca86..797476e8bef1 100644 --- a/arch/arm/boot/dts/rk3229-evb.dts +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -9,6 +9,10 @@ model = "Rockchip RK3229 Evaluation board"; compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; + aliases { + mmc0 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts index 263393ac4fa6..7bfbfd11fb55 100644 --- a/arch/arm/boot/dts/rk3229-xms6.dts +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -9,6 +9,12 @@ model = "Mecer Xtreme Mini S6"; compatible = "mecer,xms6", "rockchip,rk3229"; + aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index a4dd50aaf3fc..208f21245095 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -14,9 +14,6 @@ interrupt-parent = <&gic>; aliases { - mmc0 = &sdmmc; - mmc1 = &sdio; - mmc2 = &emmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -370,7 +367,7 @@ }; wdt: watchdog@110a0000 { - compatible = "snps,dw-wdt"; + compatible = "rockchip,rk3228-wdt", "snps,dw-wdt"; reg = <0x110a0000 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_CPU>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index ea7416c31f9b..05557ad02b33 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -679,7 +679,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; clocks = <&cru PCLK_RKPWM>; - clock-names = "pwm"; status = "disabled"; }; @@ -690,7 +689,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; clocks = <&cru PCLK_RKPWM>; - clock-names = "pwm"; status = "disabled"; }; @@ -701,7 +699,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; clocks = <&cru PCLK_RKPWM>; - clock-names = "pwm"; status = "disabled"; }; @@ -712,7 +709,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; clocks = <&cru PCLK_RKPWM>; - clock-names = "pwm"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts index b1db924710c8..f62c9f7af79d 100644 --- a/arch/arm/boot/dts/rv1108-elgin-r1.dts +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -12,6 +12,10 @@ model = "Elgin RV1108 R1 board"; compatible = "elgin,rv1108-r1", "rockchip,rv1108"; + aliases { + mmc0 = &emmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x08000000>; diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts index 30f3d0470ad9..fe5fc9bf75c9 100644 --- a/arch/arm/boot/dts/rv1108-evb.dts +++ b/arch/arm/boot/dts/rv1108-evb.dts @@ -8,6 +8,10 @@ model = "Rockchip RV1108 Evaluation board"; compatible = "rockchip,rv1108-evb", "rockchip,rv1108"; + aliases { + mmc0 = &sdmmc; + }; + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x08000000>; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index 7319a2473b80..884872ca5207 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -19,9 +19,6 @@ i2c1 = &i2c1; i2c2 = &i2c2; i2c3 = &i2c3; - mmc0 = &emmc; - mmc1 = &sdio; - mmc2 = &sdmmc; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -303,11 +300,10 @@ }; watchdog: watchdog@10360000 { - compatible = "snps,dw-wdt"; + compatible = "rockchip,rv1108-wdt", "snps,dw-wdt"; reg = <0x10360000 0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_WDT>; - clock-names = "pclk_wdt"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts index ca064359dd30..b47d8300e536 100644 --- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts +++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts @@ -115,7 +115,7 @@ compatible = "maxim,max77836-battery"; interrupt-parent = <&gph3>; - interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&fg_irq>; diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 84066c1298df..ec45ced3cde6 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -606,6 +606,15 @@ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff400 0xfffff400 0x800>; + /* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */ + atmel,mux-mask = < + /* A B C */ + 0xffffffff 0xffe03fff 0xef00019d /* pioA */ + 0x03ffffff 0x02fc7e7f 0x00780000 /* pioB */ + 0xffffffff 0xffffffff 0xf83fffff /* pioC */ + 0x003fffff 0x003f8000 0x00000000 /* pioD */ + >; + pioA: gpio@fffff400 { compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2c4952427296..801969c113d6 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -40,7 +40,7 @@ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>; }; - etb { + etb@740000 { compatible = "arm,coresight-etb10", "arm,primecell"; reg = <0x740000 0x1000>; @@ -56,9 +56,9 @@ }; }; - etm { + etm@73c000 { compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x73C000 0x1000>; + reg = <0x73c000 0x1000>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "apb_pclk"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 7c979652f330..d1841bffe3c5 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -709,7 +709,7 @@ atmel,pins = <AT91_PIOD 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD5 periph A MCI0_DA4 with pullup, conflicts with TIOA0, PWMH2 */ AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD6 periph A MCI0_DA5 with pullup, conflicts with TIOB0, PWML2 */ - AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conlicts with TCLK0, PWMH3 */ + AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PD7 periph A MCI0_DA6 with pullup, conflicts with TCLK0, PWMH3 */ AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PD8 periph A MCI0_DA7 with pullup, conflicts with PWML3 */ }; }; diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi index 4fd09997a2b9..a16a00fb5fa5 100644 --- a/arch/arm/boot/dts/ste-ab8500.dtsi +++ b/arch/arm/boot/dts/ste-ab8500.dtsi @@ -317,8 +317,8 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2900000>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; /* BUG: If turned off MMC will be affected. */ regulator-always-on; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi index e024520f4d47..8d59202cebd6 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi @@ -1,14 +1,89 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the TVK1281618 R2 UIB + * Device Tree for the TVK1281618 R2 user interface board (UIB) */ -#include "ste-href-tvk1281618.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { + i2c@80004000 { + tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio6>; + interrupts = <26 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; + + interrupt-controller; + #interrupt-cells = <1>; + status = "disabled"; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + wakeup-source; + linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>, + <MATRIX_KEY(4, 1, KEY_HOME)>, + <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>, + <MATRIX_KEY(4, 2, KEY_EMAIL)>, + <MATRIX_KEY(3, 3, KEY_RIGHT)>, + <MATRIX_KEY(2, 5, KEY_BACKSPACE)>, + <MATRIX_KEY(6, 7, KEY_MENU)>, + <MATRIX_KEY(5, 0, KEY_ENTER)>, + <MATRIX_KEY(4, 3, KEY_0)>, + <MATRIX_KEY(3, 4, KEY_DOT)>, + <MATRIX_KEY(5, 2, KEY_UP)>, + <MATRIX_KEY(3, 5, KEY_DOWN)>, + <MATRIX_KEY(4, 5, KEY_SEND)>, + <MATRIX_KEY(0, 5, KEY_BACK)>, + <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>, + <MATRIX_KEY(1, 3, KEY_SPACE)>, + <MATRIX_KEY(7, 6, KEY_LEFT)>, + <MATRIX_KEY(5, 5, KEY_SEARCH)>; + }; + }; + }; + i2c@80128000 { - lsm303dlh@18 { + accelerometer@18 { /* Accelerometer */ compatible = "st,lsm303dlh-accel"; st,drdy-int-pin = <1>; @@ -30,7 +105,7 @@ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ }; - lsm303dlh@1e { + magnetometer@1e { /* Magnetometer */ compatible = "st,lsm303dlh-magn"; reg = <0x1e>; @@ -48,7 +123,7 @@ * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ }; - lis331dl@1c { + accelerometer@1c { /* Accelerometer */ compatible = "st,lis331dl-accel"; st,drdy-int-pin = <1>; @@ -62,6 +137,72 @@ interrupts = <18 IRQ_TYPE_EDGE_RISING>, <19 IRQ_TYPE_EDGE_RISING>; }; + magnetometer@f { + /* Magnetometer */ + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_magn_tvk_mode>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; + */ + }; + gyroscope@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_magn_tvk_mode>; + interrupts-extended = + <&gpio1 0 IRQ_TYPE_EDGE_RISING>, + <&gpio0 31 IRQ_TYPE_EDGE_RISING>; + }; + pressure@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + i2c@80110000 { + synaptics@4b { + /* Synaptics RMI4 TM1217 touchscreen */ + compatible = "syna,rmi4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4b>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&synaptics_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + /* This is a landscape display */ + touchscreen-swapped-x-y; + }; + }; }; mcde@a0350000 { status = "okay"; @@ -75,5 +216,68 @@ }; }; }; + pinctrl { + prox { + prox_tvk_mode: prox_tvk { + tvk_cfg { + pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + tc35893 { + /* IRQ from the TC35893 */ + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + gyroscope { + /* + * These lines are shared between Gyroscope l3g400dh + * and AK8974 magnetometer. + */ + gyro_magn_tvk_mode: gyro_magn_tvk { + /* GPIO 31 used for INT pull down the line */ + tvk_cfg1 { + pins = "GPIO31_V3"; + ste,config = <&gpio_in_pd>; + }; + /* GPIO 32 used for DRDY, pull this down */ + tvk_cfg2 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + synaptics { + synaptics_tvk_mode: synaptics_tvk { + /* Touchscreen uses GPIO 84 */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi index cb3677f0a1cb..70f058352efc 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi @@ -1,44 +1,152 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the TVK1281618 R2 UIB + * Device Tree for the TVK1281618 R3 user interface board (UIB) + * also known as the "CYTTSP board" */ -#include "ste-href-tvk1281618.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&hall_tvk_mode>; + + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { - i2c@80128000 { - /* Marked: - * 129 - * M35 - * L3GD20 - */ - l3gd20@6a { - /* Gyroscope */ - compatible = "st,l3gd20"; + i2c@80004000 { + tc35893@44 { + compatible = "toshiba,tc35893"; + reg = <0x44>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; + + interrupt-controller; + #interrupt-cells = <1>; status = "disabled"; + + tc3589x_gpio { + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + wakeup-source; + linux,keymap = <MATRIX_KEY(3, 1, KEY_END)>, + <MATRIX_KEY(4, 1, KEY_HOME)>, + <MATRIX_KEY(6, 4, KEY_VOLUMEDOWN)>, + <MATRIX_KEY(4, 2, KEY_EMAIL)>, + <MATRIX_KEY(3, 3, KEY_RIGHT)>, + <MATRIX_KEY(2, 5, KEY_BACKSPACE)>, + <MATRIX_KEY(6, 7, KEY_MENU)>, + <MATRIX_KEY(5, 0, KEY_ENTER)>, + <MATRIX_KEY(4, 3, KEY_0)>, + <MATRIX_KEY(3, 4, KEY_DOT)>, + <MATRIX_KEY(5, 2, KEY_UP)>, + <MATRIX_KEY(3, 5, KEY_DOWN)>, + <MATRIX_KEY(4, 5, KEY_SEND)>, + <MATRIX_KEY(0, 5, KEY_BACK)>, + <MATRIX_KEY(6, 2, KEY_VOLUMEUP)>, + <MATRIX_KEY(1, 3, KEY_SPACE)>, + <MATRIX_KEY(7, 6, KEY_LEFT)>, + <MATRIX_KEY(5, 5, KEY_SEARCH)>; + }; + }; + }; + + i2c@80128000 { + accelerometer@19 { + compatible = "st,lsm303dlhc-accel"; st,drdy-int-pin = <1>; - drive-open-drain; - reg = <0x6a>; // 0x6a or 0x6b + reg = <0x19>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; }; - /* - * Marked: - * 2122 - * C3H - * DQEEE - * LIS3DH? - */ - lis3dh@18 { - /* Accelerometer */ - compatible = "st,lis3dh-accel"; + magnetometer@1e { + compatible = "st,lsm303dlm-magn"; st,drdy-int-pin = <1>; - reg = <0x18>; + reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + // This interrupt is not properly working with the driver + // interrupt-parent = <&gpio1>; + // interrupts = <0 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; - pinctrl-0 = <&accel_tvk_mode>; + pinctrl-0 = <&magn_tvk_mode>; + }; + gyroscope@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + pressure@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; + + spi@80111000 { + num-cs = <1>; + cs-gpios = <&gpio6 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_default_mode>; + status = "okay"; + + touchscreen@0 { + compatible = "cypress,cy8ctma340"; + /* + * Actually the max frequency is 6 MHz, but over 2 MHz the + * data rate needs to be restricted to max 2Mbps which the + * SPI framework cannot handle. + */ + spi-max-frequency = <2000000>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <20 IRQ_TYPE_EDGE_FALLING>; + vcpin-supply = <&ab8500_ldo_aux1_reg>; + vdd-supply = <&db8500_vsmps2_reg>; + reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + touchscreen-size-x = <480>; + touchscreen-size-y = <854>; + active-interval-ms = <0>; + touch-timeout-ms = <255>; + lowpower-interval-ms = <10>; + bootloader-key = /bits/ 8 <0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07>; + pinctrl-names = "default"; + pinctrl-0 = <&cyttsp_tvk_mode>; }; }; @@ -54,5 +162,57 @@ }; }; }; + + pinctrl { + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + tc35893 { + /* IRQ from the TC35893 */ + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + pins = "GPIO64_F3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + magnetometer { + magn_tvk_mode: magn_tvk { + /* GPIO 32 used for DRDY, pull this down */ + tvk_cfg { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + cyttsp { + cyttsp_tvk_mode: cyttsp_tvk { + /* Touchscreen uses GPIO84 for IRQ */ + tvk_cfg1 { + pins = "GPIO84_C2"; + ste,config = <&gpio_in_pu>; + }; + /* GPIO143 is reset */ + tvk_cfg2 { + pins = "GPIO143_D12"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi deleted file mode 100644 index e1dbfae22595..000000000000 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright 2012 ST-Ericsson AB - * - * Device Tree for the TVK1281618 family of UIBs - */ - -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; - - button@139 { - /* Proximity sensor */ - gpios = <&gpio6 25 GPIO_ACTIVE_HIGH>; - linux,code = <11>; /* SW_FRONT_PROXIMITY */ - label = "SFH7741 Proximity Sensor"; - }; - button@145 { - /* Hall sensor */ - gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; - linux,code = <0>; /* SW_LID */ - label = "HED54XXU11 Hall Effect Sensor"; - }; - }; - - soc { - i2c@80004000 { - tc35893@44 { - compatible = "toshiba,tc35893"; - reg = <0x44>; - interrupt-parent = <&gpio6>; - interrupts = <26 IRQ_TYPE_EDGE_RISING>; - pinctrl-names = "default"; - pinctrl-0 = <&tc35893_tvk_mode>; - - interrupt-controller; - #interrupt-cells = <1>; - - tc3589x_gpio { - compatible = "toshiba,tc3589x-gpio"; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; - }; - tc3589x_keypad { - compatible = "toshiba,tc3589x-keypad"; - interrupts = <6>; - debounce-delay-ms = <4>; - keypad,num-columns = <8>; - keypad,num-rows = <8>; - linux,no-autorepeat; - wakeup-source; - linux,keymap = <0x0301006b - 0x04010066 - 0x06040072 - 0x040200d7 - 0x0303006a - 0x0205000e - 0x0607008b - 0x0500001c - 0x0403000b - 0x03040034 - 0x05020067 - 0x0305006c - 0x040500e7 - 0x0005009e - 0x06020073 - 0x01030039 - 0x07060069 - 0x050500d9>; - }; - }; - }; - /* Sensors mounted on all board variants */ - i2c@80128000 { - ak8974@f { - /* Magnetometer */ - compatible = "asahi-kasei,ak8974"; - reg = <0x0f>; - avdd-supply = <&ab8500_ldo_aux1_reg>; - dvdd-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&gyro_magn_tvk_mode>; - /* - * These interrupts cannot be used: the other component - * ST-Micro L3D4200D gyro that is connected to the same lines - * cannot set its DRDY line to open drain, so it cannot be - * shared with other peripherals. The should be defined for - * the falling edge if they could be wired together. - * - * interrupts-extended = - * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, - * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; - */ - }; - l3g4200d@68 { - /* Gyroscope */ - compatible = "st,l3g4200d-gyro"; - st,drdy-int-pin = <2>; - reg = <0x68>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupts-extended = - <&gpio1 0 IRQ_TYPE_EDGE_RISING>, - <&gpio0 31 IRQ_TYPE_EDGE_RISING>; - }; - lsp001wm@5c { - /* Barometer/pressure sensor */ - compatible = "st,lps001wp-press"; - reg = <0x5c>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - }; - }; - - i2c@80110000 { - synaptics@4b { - /* Synaptics RMI4 TM1217 touchscreen */ - compatible = "syna,rmi4-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x4b>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; - pinctrl-names = "default"; - pinctrl-0 = <&synaptics_tvk_mode>; - interrupt-parent = <&gpio2>; - interrupts = <20 IRQ_TYPE_EDGE_FALLING>; - - rmi-f01@1 { - reg = <0x1>; - syna,nosleep = <1>; - }; - rmi-f11@11 { - reg = <0x11>; - touchscreen-inverted-x; - syna,sensor-type = <1>; - }; - }; - }; - - pinctrl { - /* Pull up this GPIO pin */ - tc35893 { - tc35893_tvk_mode: tc35893_tvk { - tvk_cfg { - pins = "GPIO218_AH11"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - prox { - prox_tvk_mode: prox_tvk { - tvk_cfg { - pins = "GPIO217_AH12"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - hall { - hall_tvk_mode: hall_tvk { - tvk_cfg { - pins = "GPIO145_C13"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - accelerometer { - accel_tvk_mode: accel_tvk { - /* Accelerometer interrupt lines 1 & 2 */ - tvk_cfg { - pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - gyroscope { - /* - * These lines are shared between Gyroscope l3g400dh - * and AK8974 magnetometer. - */ - gyro_magn_tvk_mode: gyro_magn_tvk { - /* GPIO 31 used for INT pull down the line */ - tvk_cfg1 { - pins = "GPIO31_V3"; - ste,config = <&gpio_in_pd>; - }; - /* GPIO 32 used for DRDY, pull this down */ - tvk_cfg2 { - pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; - synaptics { - synaptics_tvk_mode: synaptics_tvk { - /* Touchscreen uses GPIO 84 */ - tvk_cfg1 { - pins = "GPIO84_C2"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/ste-href520-tvk.dts b/arch/arm/boot/dts/ste-href520-tvk.dts index a036a03f6718..4201547c5988 100644 --- a/arch/arm/boot/dts/ste-href520-tvk.dts +++ b/arch/arm/boot/dts/ste-href520-tvk.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Device Tree for the HREF520 version with the TVK1281618 UIB + * Device Tree for the HREF520 version with the TVK1281618 R3 UIB */ /dts-v1/; @@ -9,7 +9,7 @@ #include "ste-href-tvk1281618-r3.dtsi" / { - model = "ST-Ericsson HREF520 and TVK1281618 UIB"; + model = "ST-Ericsson HREF520 and TVK1281618 R3 UIB"; compatible = "st-ericsson,href520", "st-ericsson,u8500"; diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 4e6e4439dcff..75506339a93c 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -9,7 +9,7 @@ #include "ste-href-tvk1281618-r2.dtsi" / { - model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; + model = "ST-Ericsson HREF (pre-v60) and TVK1281618 R2 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; /* ST6G3244ME level translator for 1.8/2.9 V */ diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index 9c2d2ee6d6d8..2db2f8be8b03 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -2,7 +2,7 @@ /* * Copyright 2012 ST-Ericsson AB * - * Device Tree for the HREF version 60 or later with the TVK1281618 UIB + * Device Tree for the HREF version 60 or later with the TVK1281618 R2 UIB */ /dts-v1/; @@ -11,7 +11,7 @@ #include "ste-href-tvk1281618-r2.dtsi" / { - model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; + model = "ST-Ericsson HREF (v60+) and TVK1281618 R2 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; /* ST6G3244ME level translator for 1.8/2.9 V */ diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index 7411bfeda285..f24369873ce2 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -135,21 +135,22 @@ /* * This regulator is a GPIO line that drives the Broadcom WLAN - * line BT_VREG_EN high and enables the internal regulators - * inside the chip. + * line WL_REG_ON high and enables the internal regulators + * inside the chip. Unfortunatley it is erroneously named + * WLAN_RST_N on the schematic but it is not a reset line. * * The voltage specified here is only used to determine the OCR mask, * the for the SDIO connector, the chip is actually connected * directly to VBAT. */ - wl_bt_reg: regulator-gpio-wlan { + wl_reg: regulator-gpio-wlan { compatible = "regulator-fixed"; - regulator-name = "BT_VREG_EN"; + regulator-name = "WL_REG_ON"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; startup-delay-us = <100000>; - /* GPIO222 (BT_VREG_EN) */ - gpio = <&gpio6 30 GPIO_ACTIVE_HIGH>; + /* GPIO215 (WLAN_RST_N to WL_REG_ON) */ + gpio = <&gpio6 23 GPIO_ACTIVE_HIGH>; enable-active-high; pinctrl-names = "default"; pinctrl-0 = <&wlan_ldo_en_default>; @@ -390,11 +391,10 @@ pinctrl-1 = <&mc1_a_2_sleep>; /* * GPIO-controlled voltage enablement: this drives - * the BT_VREG_EN line high when we use this device. - * Represented as regulator to fill OCR mask and to - * be usable in parallel with the Bluetooth chip. + * the WL_REG_ON line high when we use this device. + * Represented as regulator to fill OCR mask. */ - vmmc-supply = <&wl_bt_reg>; + vmmc-supply = <&wl_reg>; #address-cells = <1>; #size-cells = <0>; @@ -408,9 +408,6 @@ interrupt-parent = <&gpio6>; interrupts = <24 IRQ_TYPE_EDGE_FALLING>; interrupt-names = "host-wake"; - /* GPIO215 WLAN_RST_N */ - /* FIXME: kernel does not use this assert/deassert */ - reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&wlan_default_mode>; }; @@ -440,15 +437,8 @@ bluetooth { compatible = "brcm,bcm4330-bt"; - /* - * We actually have shutdown-gpios, BT_VREG_EN on GPIO222, - * but since this GPIO is shared with the WLAN chip, we need - * to reference the regulator instead. The regulator - * framework will reference count the GPIO usage and - * make sure we can use the same GPIO for several supplies. - */ - // shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; - vbat-supply = <&wl_bt_reg>; + /* GPIO222 rail BT_VREG_EN to BT_REG_ON */ + shutdown-gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; /* BT_WAKE on GPIO199 */ device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; /* BT_HOST_WAKE on GPIO97 */ @@ -759,9 +749,9 @@ /* GPIO that enables the WLAN internal LDO regulators */ wlan-ldo { wlan_ldo_en_default: wlan_ldo_default { - /* GPIO222 BT_VREG_ON */ + /* GPIO215 named WLAN_RST_N */ janice_cfg1 { - pins = "GPIO222_AJ9"; + pins = "GPIO215_AH13"; ste,config = <&gpio_out_lo>; }; }; @@ -875,11 +865,6 @@ }; wlan { wlan_default_mode: wlan_default { - /* GPIO215 used for RESET_N */ - janice_cfg1 { - pins = "GPIO215_AH13"; - ste,config = <&gpio_out_lo>; - }; /* GPIO216 for WL_HOST_WAKE */ janice_cfg2 { pins = "GPIO216_AG12"; @@ -889,14 +874,17 @@ }; bluetooth { bluetooth_default_mode: bluetooth_default { + /* GPIO199 BT_WAKE and GPIO222 BT_VREG_ON */ janice_cfg1 { - pins = "GPIO199_AH23"; + pins = "GPIO199_AH23", "GPIO222_AJ9"; ste,config = <&gpio_out_lo>; }; + /* GPIO97 BT_HOST_WAKE */ janice_cfg2 { pins = "GPIO97_D9"; ste,config = <&gpio_in_nopull>; }; + /* GPIO209 BT_RST_N */ janice_cfg3 { pins = "GPIO209_AG15"; ste,config = <&gpio_out_hi>; diff --git a/arch/arm/boot/dts/stm32h7-pinctrl.dtsi b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi new file mode 100644 index 000000000000..aa1bc3e10a49 --- /dev/null +++ b/arch/arm/boot/dts/stm32h7-pinctrl.dtsi @@ -0,0 +1,275 @@ +/* + * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pinctrl/stm32-pinfunc.h> + +&pinctrl { + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */ + <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + ethernet_rmii: rmii-0 { + pins { + pinmux = <STM32_PINMUX('G', 11, AF11)>, + <STM32_PINMUX('G', 13, AF11)>, + <STM32_PINMUX('G', 12, AF11)>, + <STM32_PINMUX('C', 4, AF11)>, + <STM32_PINMUX('C', 5, AF11)>, + <STM32_PINMUX('A', 7, AF11)>, + <STM32_PINMUX('C', 1, AF11)>, + <STM32_PINMUX('A', 2, AF11)>, + <STM32_PINMUX('A', 1, AF11)>; + slew-rate = <2>; + }; + }; + + sdmmc1_b4_pins_a: sdmmc1-b4-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + sdmmc1_dir_pins_a: sdmmc1-dir-0 { + pins1 { + pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ + slew-rate = <3>; + drive-push-pull; + bias-pull-up; + }; + pins2{ + pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ + bias-pull-up; + }; + }; + + sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { + pins { + pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ + <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ + }; + }; + + sdmmc2_b4_pins_a: sdmmc2-b4-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC1_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, AF11)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + }; + + sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 15, AF9)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, AF11)>; /* SDMMC1_CK */ + slew-rate = <3>; + drive-push-pull; + bias-disable; + }; + pins2{ + pinmux = <STM32_PINMUX('D', 7, AF11)>; /* SDMMC1_CMD */ + slew-rate = <3>; + drive-open-drain; + bias-disable; + }; + }; + + sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC1_D0 */ + <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC1_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC1_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC1_D3 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* SDMMC1_CK */ + <STM32_PINMUX('D', 7, ANALOG)>; /* SDMMC1_CMD */ + }; + }; + + spi1_pins: spi1-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 5, AF5)>, + /* SPI1_CLK */ + <STM32_PINMUX('B', 5, AF5)>; + /* SPI1_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = <STM32_PINMUX('G', 9, AF5)>; + /* SPI1_MISO */ + bias-disable; + }; + }; + + uart4_pins: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('A', 0, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('I', 9, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + usart1_pins: usart1-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */ + bias-disable; + }; + }; + + usart2_pins: usart2-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ + bias-disable; + }; + }; + + usart3_pins: usart3-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */ + <STM32_PINMUX('D', 12, AF7)>; /* USART3_RTS_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 11, AF7)>, /* USART3_RX */ + <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */ + bias-disable; + }; + }; + + usbotg_hs_pins_a: usbotg-hs-0 { + pins { + pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */ + <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */ + <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */ + <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */ + <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */ + <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */ + <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */ + <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */ + <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */ + <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */ + <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */ + <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi deleted file mode 100644 index fa5dcb6a5fdd..000000000000 --- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -#include <dt-bindings/pinctrl/stm32-pinfunc.h> - -/ { - soc { - pin-controller { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stm32h743-pinctrl"; - ranges = <0 0x58020000 0x3000>; - interrupt-parent = <&exti>; - st,syscfg = <&syscfg 0x8>; - pins-are-numbered; - - gpioa: gpio@58020000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x0 0x400>; - clocks = <&rcc GPIOA_CK>; - st,bank-name = "GPIOA"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiob: gpio@58020400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x400 0x400>; - clocks = <&rcc GPIOB_CK>; - st,bank-name = "GPIOB"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioc: gpio@58020800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x800 0x400>; - clocks = <&rcc GPIOC_CK>; - st,bank-name = "GPIOC"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiod: gpio@58020c00 { - gpio-controller; - #gpio-cells = <2>; - reg = <0xc00 0x400>; - clocks = <&rcc GPIOD_CK>; - st,bank-name = "GPIOD"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioe: gpio@58021000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1000 0x400>; - clocks = <&rcc GPIOE_CK>; - st,bank-name = "GPIOE"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiof: gpio@58021400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1400 0x400>; - clocks = <&rcc GPIOF_CK>; - st,bank-name = "GPIOF"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiog: gpio@58021800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1800 0x400>; - clocks = <&rcc GPIOG_CK>; - st,bank-name = "GPIOG"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioh: gpio@58021c00 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x1c00 0x400>; - clocks = <&rcc GPIOH_CK>; - st,bank-name = "GPIOH"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioi: gpio@58022000 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2000 0x400>; - clocks = <&rcc GPIOI_CK>; - st,bank-name = "GPIOI"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpioj: gpio@58022400 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2400 0x400>; - clocks = <&rcc GPIOJ_CK>; - st,bank-name = "GPIOJ"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpiok: gpio@58022800 { - gpio-controller; - #gpio-cells = <2>; - reg = <0x2800 0x400>; - clocks = <&rcc GPIOK_CK>; - st,bank-name = "GPIOK"; - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2c1_pins_a: i2c1-0 { - pins { - pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */ - <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */ - bias-disable; - drive-open-drain; - slew-rate = <0>; - }; - }; - - ethernet_rmii: rmii-0 { - pins { - pinmux = <STM32_PINMUX('G', 11, AF11)>, - <STM32_PINMUX('G', 13, AF11)>, - <STM32_PINMUX('G', 12, AF11)>, - <STM32_PINMUX('C', 4, AF11)>, - <STM32_PINMUX('C', 5, AF11)>, - <STM32_PINMUX('A', 7, AF11)>, - <STM32_PINMUX('C', 1, AF11)>, - <STM32_PINMUX('A', 2, AF11)>, - <STM32_PINMUX('A', 1, AF11)>; - slew-rate = <2>; - }; - }; - - sdmmc1_b4_pins_a: sdmmc1-b4-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - }; - - sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ - slew-rate = <3>; - drive-push-pull; - bias-disable; - }; - pins2{ - pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */ - slew-rate = <3>; - drive-open-drain; - bias-disable; - }; - }; - - sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ - <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */ - <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */ - <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */ - <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */ - <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */ - }; - }; - - sdmmc1_dir_pins_a: sdmmc1-dir-0 { - pins1 { - pinmux = <STM32_PINMUX('C', 6, AF8)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, AF7)>; /* SDMMC1_CDIR */ - slew-rate = <3>; - drive-push-pull; - bias-pull-up; - }; - pins2{ - pinmux = <STM32_PINMUX('B', 8, AF7)>; /* SDMMC1_CKIN */ - bias-pull-up; - }; - }; - - sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 { - pins { - pinmux = <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC1_D0DIR */ - <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */ - <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */ - <STM32_PINMUX('B', 8, ANALOG)>; /* SDMMC1_CKIN */ - }; - }; - - usart1_pins: usart1-0 { - pins1 { - pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('B', 15, AF4)>; /* USART1_RX */ - bias-disable; - }; - }; - - usart2_pins: usart2-0 { - pins1 { - pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */ - bias-disable; - drive-push-pull; - slew-rate = <0>; - }; - pins2 { - pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ - bias-disable; - }; - }; - - usbotg_hs_pins_a: usbotg-hs-0 { - pins { - pinmux = <STM32_PINMUX('H', 4, AF10)>, /* ULPI_NXT */ - <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */ - <STM32_PINMUX('C', 0, AF10)>, /* ULPI_STP> */ - <STM32_PINMUX('A', 5, AF10)>, /* ULPI_CK> */ - <STM32_PINMUX('A', 3, AF10)>, /* ULPI_D0> */ - <STM32_PINMUX('B', 0, AF10)>, /* ULPI_D1> */ - <STM32_PINMUX('B', 1, AF10)>, /* ULPI_D2> */ - <STM32_PINMUX('B', 10, AF10)>, /* ULPI_D3> */ - <STM32_PINMUX('B', 11, AF10)>, /* ULPI_D4> */ - <STM32_PINMUX('B', 12, AF10)>, /* ULPI_D5> */ - <STM32_PINMUX('B', 13, AF10)>, /* ULPI_D6> */ - <STM32_PINMUX('B', 5, AF10)>; /* ULPI_D7> */ - bias-disable; - drive-push-pull; - slew-rate = <2>; - }; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi index 4ebffb0a45a3..05ecdf9ff03a 100644 --- a/arch/arm/boot/dts/stm32h743.dtsi +++ b/arch/arm/boot/dts/stm32h743.dtsi @@ -135,6 +135,22 @@ clocks = <&rcc USART2_CK>; }; + usart3: serial@40004800 { + compatible = "st,stm32h7-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + status = "disabled"; + clocks = <&rcc USART3_CK>; + }; + + uart4: serial@40004c00 { + compatible = "st,stm32h7-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + status = "disabled"; + clocks = <&rcc UART4_CK>; + }; + i2c1: i2c@40005400 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; @@ -159,7 +175,7 @@ status = "disabled"; }; - i2c3: i2c@40005C00 { + i2c3: i2c@40005c00 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -368,6 +384,21 @@ max-frequency = <120000000>; }; + sdmmc2: mmc@48022400 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x10153180>; + reg = <0x48022400 0x400>; + interrupts = <124>; + interrupt-names = "cmd_irq"; + clocks = <&rcc SDMMC2_CK>; + clock-names = "apb_pclk"; + resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <120000000>; + status = "disabled"; + }; + exti: interrupt-controller@58000000 { compatible = "st,stm32h7-exti"; interrupt-controller; @@ -392,7 +423,7 @@ status = "disabled"; }; - i2c4: i2c@58001C00 { + i2c4: i2c@58001c00 { compatible = "st,stm32f7-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -555,6 +586,148 @@ snps,pbl = <8>; status = "disabled"; }; + + pinctrl: pin-controller@58020000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32h743-pinctrl"; + ranges = <0 0x58020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@58020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc GPIOA_CK>; + st,bank-name = "GPIOA"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@58020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc GPIOB_CK>; + st,bank-name = "GPIOB"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@58020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc GPIOC_CK>; + st,bank-name = "GPIOC"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@58020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc GPIOD_CK>; + st,bank-name = "GPIOD"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@58021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc GPIOE_CK>; + st,bank-name = "GPIOE"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@58021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc GPIOF_CK>; + st,bank-name = "GPIOF"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@58021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc GPIOG_CK>; + st,bank-name = "GPIOG"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@58021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc GPIOH_CK>; + st,bank-name = "GPIOH"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@58022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc GPIOI_CK>; + st,bank-name = "GPIOI"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@58022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc GPIOJ_CK>; + st,bank-name = "GPIOJ"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@58022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc GPIOK_CK>; + st,bank-name = "GPIOK"; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-disco.dts b/arch/arm/boot/dts/stm32h743i-disco.dts index e446d311c520..59e01ce10318 100644 --- a/arch/arm/boot/dts/stm32h743i-disco.dts +++ b/arch/arm/boot/dts/stm32h743i-disco.dts @@ -42,7 +42,7 @@ /dts-v1/; #include "stm32h743.dtsi" -#include "stm32h743-pinctrl.dtsi" +#include "stm32h7-pinctrl.dtsi" / { model = "STMicroelectronics STM32H743i-Discovery board"; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index 8f398178f5e5..38cc7faf6884 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -42,7 +42,7 @@ /dts-v1/; #include "stm32h743.dtsi" -#include "stm32h743-pinctrl.dtsi" +#include "stm32h7-pinctrl.dtsi" / { model = "STMicroelectronics STM32H743i-EVAL board"; diff --git a/arch/arm/boot/dts/stm32h750.dtsi b/arch/arm/boot/dts/stm32h750.dtsi new file mode 100644 index 000000000000..41e3b1e3a874 --- /dev/null +++ b/arch/arm/boot/dts/stm32h750.dtsi @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ +/* Copyright (C) STMicroelectronics 2021 - All Rights Reserved */ + +#include "stm32h743.dtsi" + + diff --git a/arch/arm/boot/dts/stm32h750i-art-pi.dts b/arch/arm/boot/dts/stm32h750i-art-pi.dts new file mode 100644 index 000000000000..9bb73bb61901 --- /dev/null +++ b/arch/arm/boot/dts/stm32h750i-art-pi.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2021 - Dillon Min <dillon.minfei@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * For art-pi board resources, you can refer to link: + * https://art-pi.gitee.io/website/ + */ + +/dts-v1/; +#include "stm32h750.dtsi" +#include "stm32h7-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "RT-Thread STM32H750i-ART-PI board"; + compatible = "st,stm32h750i-art-pi", "st,stm32h750"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:2000000n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x2000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + no-map; + size = <0x100000>; + linux,dma-default; + }; + }; + + aliases { + serial0 = &uart4; + serial1 = &usart3; + }; + + leds { + compatible = "gpio-leds"; + led-red { + gpios = <&gpioi 8 0>; + }; + led-green { + gpios = <&gpioc 15 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wlan_pwr: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&dma1 { + status = "okay"; +}; + +&dma2 { + status = "okay"; +}; + +&mac { + status = "disabled"; + pinctrl-0 = <ðernet_rmii>; + pinctrl-names = "default"; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>; + broken-cd; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&wlan_pwr>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>; + dmas = <&dmamux1 37 0x400 0x05>, + <&dmamux1 38 0x400 0x05>; + dma-names = "rx", "tx"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + + partition@0 { + label = "root filesystem"; + reg = <0 0x1000000>; + }; + }; +}; + +&usart2 { + pinctrl-0 = <&usart2_pins>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&usart3 { + pinctrl-names = "default"; + pinctrl-0 = <&usart3_pins>; + dmas = <&dmamux1 45 0x400 0x05>, + <&dmamux1 46 0x400 0x05>; + dma-names = "rx", "tx"; + st,hw-flow-ctrl; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + host-wakeup-gpios = <&gpioc 0 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpioi 10 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; + max-speed = <115200>; + }; +}; + +&uart4 { + pinctrl-0 = <&uart4_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + + diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi index 7b4249ed1983..060baa8b7e9d 100644 --- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi @@ -1891,10 +1891,15 @@ usart2_idle_pins_c: usart2-idle-2 { pins1 { pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */ - <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */ <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + pins3 { pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */ bias-disable; }; @@ -1940,10 +1945,15 @@ usart3_idle_pins_b: usart3-idle-1 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; }; @@ -1976,10 +1986,15 @@ usart3_idle_pins_c: usart3-idle-2 { pins1 { pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */ - <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */ <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */ }; pins2 { + pinmux = <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */ bias-disable; }; diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi index 4b8031782555..fcd3230c469b 100644 --- a/arch/arm/boot/dts/stm32mp151.dtsi +++ b/arch/arm/boot/dts/stm32mp151.dtsi @@ -452,32 +452,36 @@ usart2: serial@4000e000 { compatible = "st,stm32h7-uart"; reg = <0x4000e000 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART2_K>; + wakeup-source; status = "disabled"; }; usart3: serial@4000f000 { compatible = "st,stm32h7-uart"; reg = <0x4000f000 0x400>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART3_K>; + wakeup-source; status = "disabled"; }; uart4: serial@40010000 { compatible = "st,stm32h7-uart"; reg = <0x40010000 0x400>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART4_K>; + wakeup-source; status = "disabled"; }; uart5: serial@40011000 { compatible = "st,stm32h7-uart"; reg = <0x40011000 0x400>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART5_K>; + wakeup-source; status = "disabled"; }; @@ -493,6 +497,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x1>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -508,6 +513,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x2>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -523,6 +529,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x4>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -538,6 +545,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x10>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -577,16 +585,18 @@ uart7: serial@40018000 { compatible = "st,stm32h7-uart"; reg = <0x40018000 0x400>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART7_K>; + wakeup-source; status = "disabled"; }; uart8: serial@40019000 { compatible = "st,stm32h7-uart"; reg = <0x40019000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc UART8_K>; + wakeup-source; status = "disabled"; }; @@ -665,8 +675,9 @@ usart6: serial@44003000 { compatible = "st,stm32h7-uart"; reg = <0x44003000 0x400>; - interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART6_K>; + wakeup-source; status = "disabled"; }; @@ -1421,11 +1432,13 @@ "mac-clk-tx", "mac-clk-rx", "eth-ck", + "ptp_ref", "ethstp"; clocks = <&rcc ETHMAC>, <&rcc ETHTX>, <&rcc ETHRX>, <&rcc ETHCK_K>, + <&rcc ETHPTP_K>, <&rcc ETHSTP>; st,syscon = <&syscfg 0x4>; snps,mixed-burst; @@ -1505,8 +1518,9 @@ usart1: serial@5c000000 { compatible = "st,stm32h7-uart"; reg = <0x5c000000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc USART1_K>; + wakeup-source; status = "disabled"; }; @@ -1536,6 +1550,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x8>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; @@ -1573,6 +1588,7 @@ #size-cells = <0>; st,syscfg-fmp = <&syscfg 0x4 0x20>; wakeup-source; + i2c-analog-filter; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts index 02a39132958e..b4e504f026ce 100644 --- a/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts +++ b/arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dts @@ -20,6 +20,10 @@ "st,stm32mp153"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts new file mode 100644 index 000000000000..d3058a036c74 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 C.TOUCH 2.0"; + compatible = "engicam,icore-stm32mp1-ctouch2", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts new file mode 100644 index 000000000000..ec9f1d1cd50f --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-icore-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam i.Core STM32MP1 EDIMM2.2 Starter Kit"; + compatible = "engicam,icore-stm32mp1-edimm2.2", + "engicam,icore-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi new file mode 100644 index 000000000000..01166ccacf2b --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1.dtsi @@ -0,0 +1,196 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,icore-stm32mp1", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + vddcore: regulator-vddcore { + compatible = "regulator-fixed"; + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd: regulator-vdd { + compatible = "regulator-fixed"; + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_usb: regulator-vdd-usb { + compatible = "regulator-fixed"; + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdda: regulator-vdda { + compatible = "regulator-fixed"; + regulator-name = "vdda"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_ddr: regulator-vdd-ddr { + compatible = "regulator-fixed"; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vtt_ddr: regulator-vtt-ddr { + compatible = "regulator-fixed"; + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + regulator-always-on; + vin-supply = <&vdd>; + }; + + vref_ddr: regulator-vref-ddr { + compatible = "regulator-fixed"; + regulator-name = "vref_ddr"; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <675000>; + regulator-always-on; + vin-supply = <&vdd>; + }; + + vdd_sd: regulator-vdd-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v3: regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2v8: regulator-v2v8 { + compatible = "regulator-fixed"; + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; + + v1v8: regulator-v1v8 { + compatible = "regulator-fixed"; + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&v3v3>; + }; +}; + +&dts { + status = "okay"; +}; + +&i2c2 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2{ + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc{ + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc{ + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts new file mode 100644 index 000000000000..674b2d330dc4 --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-microgea-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame"; + compatible = "engicam,microgea-stm32mp1-microdev2.0-of7", + "engicam,microgea-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>; + default-on; + }; + + lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + power-supply = <&panel_pwr>; + }; + + panel_pwr: regulator-panel-pwr { + compatible = "regulator-fixed"; + regulator-name = "panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>; + regulator-always-on; + }; + + panel { + compatible = "auo,b101aw03"; + backlight = <&backlight>; + enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>; + power-supply = <&lcd_3v3>; + + port { + panel_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; +}; + +&i2c2 { + i2c-scl-falling-time-ns = <20>; + i2c-scl-rising-time-ns = <185>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_pins_a>; + pinctrl-1 = <&i2c2_sleep_pins_a>; + status = "okay"; +}; + +<dc { + pinctrl-names = "default"; + pinctrl-0 = <<dc_pins>; + status = "okay"; + + port { + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pinctrl { + ltdc_pins: ltdc { + pins { + pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */ + <STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */ + <STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */ + <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */ + <STM32_PINMUX('D', 9, AF14)>, /* LTDC_B0 */ + <STM32_PINMUX('E', 5, AF14)>, /* LTDC_G0 */ + <STM32_PINMUX('E', 6, AF14)>, /* LTDC_G1 */ + <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */ + <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */ + <STM32_PINMUX('G', 7, AF14)>, /* LTDC_CLK */ + <STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */ + <STM32_PINMUX('H', 2, AF14)>, /* LTDC_R0 */ + <STM32_PINMUX('H', 3, AF14)>, /* LTDC_R1 */ + <STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */ + <STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */ + <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */ + <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */ + <STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */ + <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */ + <STM32_PINMUX('I', 0, AF14)>, /* LTDC_G5 */ + <STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */ + <STM32_PINMUX('I', 2, AF14)>, /* LTDC_G7 */ + <STM32_PINMUX('I', 4, AF14)>, /* LTDC_B4 */ + <STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */ + <STM32_PINMUX('B', 8, AF14)>, /* LTDC_B6 */ + <STM32_PINMUX('I', 7, AF14)>, /* LTDC_B7 */ + <STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */ + <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&vdd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; + +/* J31: RS323 */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts new file mode 100644 index 000000000000..7a75868164dc --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/dts-v1/; +#include "stm32mp157.dtsi" +#include "stm32mp157a-microgea-stm32mp1.dtsi" +#include "stm32mp15-pinctrl.dtsi" +#include "stm32mp15xxaa-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 Carrier Board"; + compatible = "engicam,microgea-stm32mp1-microdev2.0", + "engicam,microgea-stm32mp1", "st,stm32mp157"; + + aliases { + serial0 = &uart4; + serial1 = &uart8; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&sdmmc1 { + bus-width = <4>; + disable-wp; + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + st,neg-edge; + vmmc-supply = <&vdd>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + status = "okay"; +}; + +/* J31: RS323 */ +&uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&uart8_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi new file mode 100644 index 000000000000..0b85175f151e --- /dev/null +++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) STMicroelectronics 2019 - All Rights Reserved + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutons(India) + */ + +/ { + compatible = "engicam,microgea-stm32mp1", "st,stm32mp157"; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + }; + + vin: regulator-vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vddcore: regulator-vddcore { + compatible = "regulator-fixed"; + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + vin-supply = <&vin>; + }; + + vdd: regulator-vdd { + compatible = "regulator-fixed"; + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vin>; + }; + + vddq_ddr: regulator-vddq-ddr { + compatible = "regulator-fixed"; + regulator-name = "vddq_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + vin-supply = <&vin>; + }; +}; + +&dts { + status = "okay"; +}; + +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_a>; + pinctrl-1 = <&fmc_sleep_pins_a>; + status = "okay"; + + nand-controller@4,0 { + status = "okay"; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +&ipcc { + status = "okay"; +}; + +&iwdg2{ + timeout-sec = <32>; + status = "okay"; +}; + +&m4_rproc{ + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc{ + status = "okay"; +}; + +&vrefbuf { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vdda-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts index d3b81382f97c..6dd8216c235e 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts @@ -20,6 +20,10 @@ "st,stm32mp157"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts index cfb8f8a0c82d..7067a860aaff 100644 --- a/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts +++ b/arch/arm/boot/dts/stm32mp157c-dhcom-picoitx.dts @@ -20,6 +20,10 @@ "st,stm32mp157"; }; +&cryp1 { + status = "okay"; +}; + &m_can1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi index fad23d6f69b8..fb45c5aa878d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi @@ -43,15 +43,15 @@ &gpiod { gpio-line-names = "", "", "", "", - "", "", "", "", - "", "", "", "Out1", - "Out2", "", "", ""; + "", "", "DHCOM-B", "", + "", "", "", "DRC02-Out1", + "DRC02-Out2", "", "", ""; }; &gpioi { - gpio-line-names = "In1", "", "", "", - "", "", "", "", - "In2", "", "", "", + gpio-line-names = "DRC02-In1", "DHCOM-O", "DHCOM-H", "DHCOM-I", + "DHCOM-R", "DHCOM-M", "", "", + "DRC02-In2", "", "", "", "", "", "", ""; /* diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi index cd3a1798ca68..ba816ef8b9b2 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi @@ -57,22 +57,22 @@ &gpioc { gpio-line-names = "", "", "", "", - "", "", "In1", "", + "", "", "PicoITX-In1", "", "", "", "", "", "", "", "", ""; }; &gpiod { gpio-line-names = "", "", "", "", - "", "", "", "", - "", "", "", "Out1", - "Out2", "", "", ""; + "", "", "DHCOM-B", "", + "", "", "", "PicoITX-Out1", + "PicoITX-Out2", "", "", ""; }; &gpiog { - gpio-line-names = "In2", "", "", "", - "", "", "", "", + gpio-line-names = "PicoITX-In2", "", "", "", "", "", "", "", + "DHCOM-L", "", "", "", "", "", "", ""; }; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi index 2617815e42a6..272a1a67a9ad 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi @@ -92,6 +92,10 @@ }; }; +&crc1 { + status = "okay"; +}; + &dac { pinctrl-names = "default"; pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>; @@ -164,10 +168,70 @@ }; }; +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-K", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHCOM-Q", "", "", "", + "", "", "", ""; +}; + &gpioc { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-E", "", + "", "", "", "", + "", "", "", ""; status = "okay"; }; +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-B", "", + "", "", "", "DHCOM-F", + "DHCOM-D", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "DHCOM-P", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiof { + gpio-line-names = "", "", "", "DHCOM-A", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiog { + gpio-line-names = "DHCOM-C", "", "", "", + "", "", "", "", + "DHCOM-L", "", "", "", + "", "", "", ""; +}; + +&gpioh { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOM-N", + "DHCOM-J", "DHCOM-W", "DHCOM-V", "DHCOM-U", + "DHCOM-T", "", "DHCOM-S", ""; +}; + +&gpioi { + gpio-line-names = "DHCOM-G", "DHCOM-O", "DHCOM-H", "DHCOM-I", + "DHCOM-R", "DHCOM-M", "", "", + "", "", "", "", + "", "", "", ""; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi index b09e87fe901a..64dca5b7f748 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi @@ -162,6 +162,41 @@ }; }; +&gpioa { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "AV96-K", + "AV96-I", "", "AV96-A", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "AV96-J", "", "", + "", "", "", "AV96-B", + "", "AV96-L", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "AV96-C", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "", "", "", + "AV96-D", "", "", "", + "", "", "AV96-E", "AV96-F"; +}; + +&gpiof { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "", "", "", + "AV96-G", "AV96-H", "", ""; +}; + &i2c1 { /* X6 I2C1 */ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_b>; diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi index 803eb8bc9c85..013ae369791d 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi @@ -21,6 +21,10 @@ }; }; +&crc1 { + status = "okay"; +}; + &dts { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts new file mode 100644 index 000000000000..3628f12d2521 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-topwise-a721.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020 Pascal Roeleven <dev@pascalroeleven.nl> + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Topwise A721"; + compatible = "topwise,a721", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000 PWM_POLARITY_INVERTED>; + power-supply = <®_vbat>; + enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + panel { + compatible = "starry,kr070pe2t"; + backlight = <&backlight>; + power-supply = <®_lcd_power>; + + port { + panel_input: endpoint { + remote-endpoint = <&tcon0_out_panel>; + }; + }; + }; + + reg_lcd_power: reg-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "reg-lcd-power"; + gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + enable-active-high; + }; + + reg_vbat: reg-vbat { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + accelerometer@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; + + touchscreen@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&pio>; + interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + vcc-supply = <®_vcc3v3>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button-571 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <571428>; + }; + + button-761 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH01 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-ph-supply = <®_vcc3v3>; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&tcon0_out { + tcon0_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 486cec6f71e0..236ebfc06192 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -227,7 +227,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index e4f3415e6108..7d2eaaf5c33e 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -116,7 +116,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 7bd4bdd66a76..83611434270c 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -116,7 +116,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a75033e85fcb..a31f9072bf79 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -611,6 +611,7 @@ pio: pinctrl@1c20800 { compatible = "allwinner,sun6i-a31-pinctrl"; reg = <0x01c20800 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, @@ -802,6 +803,7 @@ lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -1299,6 +1301,7 @@ #clock-cells = <1>; compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc32k>; @@ -1308,7 +1311,7 @@ r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1383,6 +1386,7 @@ r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun6i-a31-r-pinctrl"; reg = <0x01f02c00 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts index 66bc6ca77afb..b32b70ada7fd 100644 --- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -159,7 +159,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; x-powers,drive-vbus-en; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi index 7455c0db4a8a..227ad489731c 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -79,7 +79,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index efb25b949f30..96554ab4f6d3 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -149,7 +149,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index cadc45255d7b..0b61f5368d44 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -99,7 +99,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; }; }; diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi index 6bf3fbdd738f..f38d19c6be8c 100644 --- a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi @@ -80,7 +80,7 @@ compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a42fac676b31..4461d5098b20 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -338,6 +338,7 @@ pio: pinctrl@1c20800 { /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; + interrupt-parent = <&r_intc>; /* interrupts get set in SoC specific dtsi file */ clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; @@ -473,6 +474,7 @@ lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -709,6 +711,7 @@ rtc: rtc@1f00000 { compatible = "allwinner,sun8i-a23-rtc"; reg = <0x01f00000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out"; @@ -719,7 +722,7 @@ r_intc: interrupt-controller@1f00c00 { compatible = "allwinner,sun6i-a31-r-intc"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; @@ -805,6 +808,7 @@ r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; diff --git a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts index 8538514c8588..6fee8f133508 100644 --- a/arch/arm/boot/dts/sun8i-a33-olinuxino.dts +++ b/arch/arm/boot/dts/sun8i-a33-olinuxino.dts @@ -99,7 +99,7 @@ compatible = "x-powers,axp223"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index d54a067fc76e..0c82ff3c7cb4 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -166,7 +166,7 @@ compatible = "x-powers,axp223"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; }; }; diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts index 9c006fc18821..c31c97d16024 100644 --- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts +++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts @@ -122,7 +122,7 @@ compatible = "x-powers,axp818", "x-powers,axp813"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; swin-supply = <®_dcdc1>; }; @@ -142,7 +142,7 @@ ac100_rtc: rtc { compatible = "x-powers,ac100-rtc"; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; clocks = <&ac100_codec>; #clock-cells = <1>; clock-output-names = "cko1_rtc", diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index b60016a4429c..5a7e1bd5f825 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -203,7 +203,7 @@ compatible = "x-powers,axp813"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; fldoin-supply = <®_dcdc5>; swin-supply = <®_dcdc1>; @@ -225,7 +225,7 @@ ac100_rtc: rtc { compatible = "x-powers,ac100-rtc"; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; clocks = <&ac100_codec>; #clock-cells = <1>; clock-output-names = "cko1_rtc", diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index e26af7cf10e0..870993393fc2 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -239,7 +239,7 @@ compatible = "x-powers,axp818", "x-powers,axp813"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; swin-supply = <®_dcdc1>; x-powers,drive-vbus-en; @@ -260,7 +260,7 @@ ac100_rtc: rtc { compatible = "x-powers,ac100-rtc"; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; clocks = <&ac100_codec>; #clock-cells = <1>; clock-output-names = "cko1_rtc", diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 83b01b03e08e..7fe2a584ddf9 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -263,7 +263,7 @@ compatible = "x-powers,axp813"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; swin-supply = <®_dcdc1>; x-powers,drive-vbus-en; }; @@ -283,7 +283,7 @@ ac100_rtc: rtc { compatible = "x-powers,ac100-rtc"; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; clocks = <&ac100_codec>; #clock-cells = <1>; clock-output-names = "cko1_rtc", diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index bd898b250e74..ac97eac91349 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -708,6 +708,7 @@ pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-a83t-pinctrl"; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; @@ -1111,7 +1112,7 @@ compatible = "allwinner,sun8i-a83t-r-intc", "allwinner,sun6i-a31-r-intc"; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0x01f00c00 0x400>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; @@ -1147,6 +1148,7 @@ r_lradc: lradc@1f03c00 { compatible = "allwinner,sun8i-a83t-r-lradc"; reg = <0x01f03c00 0x100>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -1154,6 +1156,7 @@ r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&osc16Md512>; diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts index f3f7a2c912ab..8e8634ff2f9d 100644 --- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts @@ -26,6 +26,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "c"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -103,10 +114,24 @@ cpu-supply = <®_vdd_cpux>; }; +&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mmc0 { vmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts index 62b5280ec093..f0e591e1c771 100644 --- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts +++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts @@ -111,6 +111,17 @@ #sound-dai-cells = <0>; compatible = "linux,spdif-dit"; }; + + r-gpio-keys { + compatible = "gpio-keys"; + + power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; }; &de { diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts index 293016d081cd..bf5b5e2f6168 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts @@ -164,7 +164,7 @@ compatible = "x-powers,axp223"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts index 2be1b76fe2f6..95543a9c2118 100644 --- a/arch/arm/boot/dts/sun8i-r16-parrot.dts +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -165,7 +165,7 @@ compatible = "x-powers,axp223"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; }; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi index 797d61cff11e..872d56caa9ce 100644 --- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -94,7 +94,7 @@ compatible = "x-powers,axp223"; reg = <0x3a3>; interrupt-parent = <&r_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; eldoin-supply = <®_dcdc1>; drivevbus-supply = <®_vcc5v0>; x-powers,drive-vbus-en; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 9be13378d4df..c7428df9469e 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -395,6 +395,7 @@ pio: pinctrl@1c20800 { /* compatible is in per SoC .dtsi file */ reg = <0x01c20800 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; @@ -852,6 +853,7 @@ rtc: rtc@1f00000 { /* compatible is in per SoC .dtsi file */ reg = <0x01f00000 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out", "iosc"; @@ -859,6 +861,15 @@ #clock-cells = <1>; }; + r_intc: interrupt-controller@1f00c00 { + compatible = "allwinner,sun8i-h3-r-intc", + "allwinner,sun6i-a31-r-intc"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x01f00c00 0x400>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + r_ccu: clock@1f01400 { compatible = "allwinner,sun8i-h3-r-ccu"; reg = <0x01f01400 0x100>; @@ -900,6 +911,7 @@ r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; + interrupt-parent = <&r_intc>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&r_ccu CLK_APB0_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; diff --git a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi index 49d9420a3289..781ac8601030 100644 --- a/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra124-peripherals-opp.dtsi @@ -128,24 +128,28 @@ opp-microvolt = <800000 800000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0003>; + opp-suspend; }; opp@204000000,950 { opp-microvolt = <950000 950000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0008>; + opp-suspend; }; opp@204000000,1050 { opp-microvolt = <1050000 1050000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0010>; + opp-suspend; }; opp@204000000,1110 { opp-microvolt = <1110000 1110000 1150000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0004>; + opp-suspend; }; opp@264000000,800 { @@ -360,6 +364,7 @@ opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x001F>; opp-peak-kBps = <3264000>; + opp-suspend; }; opp@264000000 { diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts index d3b99535d755..2298fc034183 100644 --- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts @@ -448,8 +448,10 @@ reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>; - avdd-supply = <&vdd_3v3_sys>; + vdda-supply = <&vdd_3v3_sys>; vdd-supply = <&vdd_3v3_sys>; + + atmel,wakeup-method = <1>; }; gyroscope@68 { @@ -575,7 +577,7 @@ vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <950000>; regulator-max-microvolt = <1300000>; regulator-coupled-with = <&rtc_vdd &vdd_cpu>; regulator-coupled-max-spread = <170000 550000>; @@ -616,7 +618,7 @@ rtc_vdd: ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <950000>; regulator-max-microvolt = <1300000>; regulator-coupled-with = <&vdd_core &vdd_cpu>; regulator-coupled-max-spread = <170000 550000>; @@ -838,9 +840,10 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -1055,7 +1058,7 @@ trip0: cpu-alert0 { /* start throttling at 50C */ temperature = <50000>; - hysteresis = <3000>; + hysteresis = <200>; type = "passive"; }; @@ -1070,7 +1073,8 @@ cooling-maps { map0 { trip = <&trip0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi index 702a635e88e7..135de316383b 100644 --- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi @@ -9,12 +9,14 @@ clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0003>; opp-hz = /bits/ 64 <216000000>; + opp-suspend; }; opp@216000000,800 { clock-latency-ns = <400000>; opp-supported-hw = <0x0F 0x0004>; opp-hz = /bits/ 64 <216000000>; + opp-suspend; }; opp@312000000,750 { diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 7e49112cd9a1..940a9f31cd86 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -387,10 +387,10 @@ core_vdd_reg: sm0 { regulator-name = "+1.2vs_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; regulator-coupled-with = <&rtc_vdd_reg &cpu_vdd_reg>; - regulator-coupled-max-spread = <170000 450000>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; nvidia,tegra-core-regulator; @@ -401,7 +401,7 @@ regulator-min-microvolt = <750000>; regulator-max-microvolt = <1100000>; regulator-coupled-with = <&core_vdd_reg &rtc_vdd_reg>; - regulator-coupled-max-spread = <450000 450000>; + regulator-coupled-max-spread = <550000 550000>; regulator-always-on; nvidia,tegra-cpu-regulator; @@ -425,10 +425,10 @@ rtc_vdd_reg: ldo2 { regulator-name = "+1.2vs_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1225000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; regulator-coupled-with = <&core_vdd_reg &cpu_vdd_reg>; - regulator-coupled-max-spread = <170000 450000>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; nvidia,tegra-rtc-regulator; diff --git a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi index b84afecea154..ef3ad2e5f270 100644 --- a/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra20-peripherals-opp.dtsi @@ -68,6 +68,7 @@ opp-microvolt = <1000000 1000000 1300000>; opp-hz = /bits/ 64 <216000000>; opp-supported-hw = <0x000F>; + opp-suspend; }; opp@300000000 { diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 055334ae3d28..99a356c1ccec 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -2,8 +2,10 @@ /dts-v1/; #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra20.dtsi" #include "tegra20-cpu-opp.dtsi" +#include "tegra20-cpu-opp-microvolt.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; @@ -420,18 +422,28 @@ regulator-always-on; }; - sm0 { + vdd_core: sm0 { regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&rtc_vdd &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-core-regulator; }; - sm1 { + vdd_cpu: sm1 { regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1125000>; + regulator-coupled-with = <&vdd_core &rtc_vdd>; + regulator-coupled-max-spread = <550000 550000>; regulator-always-on; + regulator-boot-on; + + nvidia,tegra-cpu-regulator; }; sm2_reg: sm2 { @@ -450,10 +462,16 @@ regulator-always-on; }; - ldo2 { + rtc_vdd: ldo2 { regulator-name = "vdd_ldo2,vdd_rtc"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-coupled-with = <&vdd_core &vdd_cpu>; + regulator-coupled-max-spread = <170000 550000>; + regulator-always-on; + regulator-boot-on; + + nvidia,tegra-rtc-regulator; }; ldo3 { @@ -511,9 +529,10 @@ }; }; - temperature-sensor@4c { + nct1008: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; + #thermal-sensor-cells = <1>; }; }; @@ -595,11 +614,15 @@ cpus { cpu0: cpu@0 { + cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { + cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -697,4 +720,37 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip0: cpu-alert0 { + /* start throttling at 50C */ + temperature = <50000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 6544ce70b46f..b2ac51fb15b1 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -860,6 +860,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi index ac1c1a63eb0e..dc773b1bf8ee 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi @@ -1056,19 +1056,22 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { cpu-supply = <&vdd_cpu>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; }; @@ -1281,7 +1284,10 @@ cooling-maps { map0 { trip = <&trip0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi index bfc06b988781..b97da45ebdb4 100644 --- a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi +++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi @@ -12,6 +12,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index e0624b74fb50..e159feeedef7 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1776,6 +1776,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index c1c0ca628af1..a11028b8b67b 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -2,8 +2,6 @@ /dts-v1/; #include "tegra30-cardhu.dtsi" -#include "tegra30-cpu-opp.dtsi" -#include "tegra30-cpu-opp-microvolt.dtsi" /* This dts file support the cardhu A04 and later versions of board */ @@ -92,50 +90,4 @@ enable-active-high; gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; - - i2c@7000d000 { - pmic: tps65911@2d { - regulators { - vddctrl_reg: vddctrl { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1125000>; - regulator-coupled-with = <&vddcore_reg>; - regulator-coupled-max-spread = <300000>; - regulator-max-step-microvolt = <100000>; - - nvidia,tegra-cpu-regulator; - }; - }; - }; - - vddcore_reg: tps62361@60 { - regulator-coupled-with = <&vddctrl_reg>; - regulator-coupled-max-spread = <300000>; - regulator-max-step-microvolt = <100000>; - - nvidia,tegra-core-regulator; - }; - }; - - cpus { - cpu0: cpu@0 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@1 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@2 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - - cpu@3 { - cpu-supply = <&vddctrl_reg>; - operating-points-v2 = <&cpu0_opp_table>; - }; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index dab9989fa760..2dff14b87f3e 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,6 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 #include <dt-bindings/input/input.h> +#include <dt-bindings/thermal/thermal.h> #include "tegra30.dtsi" +#include "tegra30-cpu-opp.dtsi" +#include "tegra30-cpu-opp-microvolt.dtsi" /** * This file contains common DT entry for all fab version of Cardhu. @@ -240,6 +243,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; @@ -272,9 +276,14 @@ vddctrl_reg: vddctrl { regulator-name = "vdd_cpu,vdd_sys"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1250000>; + regulator-coupled-with = <&vdd_core>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-always-on; + + nvidia,tegra-cpu-regulator; }; vio_reg: vio { @@ -334,25 +343,31 @@ }; }; - temperature-sensor@4c { + nct1008: temperature-sensor@4c { compatible = "onnn,nct1008"; reg = <0x4c>; vcc-supply = <&sys_3v3_reg>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; + #thermal-sensor-cells = <1>; }; - tps62361@60 { + vdd_core: tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; regulator-name = "tps62361-vout"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1500000>; + regulator-coupled-with = <&vddctrl_reg>; + regulator-coupled-max-spread = <300000>; + regulator-max-step-microvolt = <100000>; regulator-boot-on; regulator-always-on; ti,vsel0-state-high; ti,vsel1-state-high; + + nvidia,tegra-core-regulator; }; }; @@ -424,6 +439,32 @@ #clock-cells = <0>; }; + cpus { + cpu0: cpu@0 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + cpu-supply = <&vddctrl_reg>; + operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; + }; + }; + panel: panel { compatible = "chunghwa,claa101wb01"; ddc-i2c-bus = <&panelddc>; @@ -603,6 +644,41 @@ <&tegra_car TEGRA30_CLK_EXTERN1>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&nct1008 1>; + + trips { + trip0: cpu-alert0 { + /* throttle at 57C until temperature drops to 56.8C */ + temperature = <57000>; + hysteresis = <200>; + type = "passive"; + }; + + trip1: cpu-crit { + /* shut down at 60C */ + temperature = <60000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index e36aa3ce6c3d..413e35215804 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -737,6 +737,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,system-power-controller; diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi index 0f7135006d19..72f2fe26cc0e 100644 --- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi @@ -45,18 +45,21 @@ clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x31FE>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@204000000,850 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0C01>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@204000000,912 { clock-latency-ns = <100000>; opp-supported-hw = <0x1F 0x0200>; opp-hz = /bits/ 64 <204000000>; + opp-suspend; }; opp@312000000,850 { diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts index 0368b3b816ef..9a10e0d69762 100644 --- a/arch/arm/boot/dts/tegra30-ouya.dts +++ b/arch/arm/boot/dts/tegra30-ouya.dts @@ -139,6 +139,7 @@ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; + wakeup-source; ti,en-gpio-sleep = <0 1 1 1 1 1 0 0 1>; ti,system-power-controller; @@ -391,19 +392,23 @@ cpu-supply = <&vdd_cpu>; #cooling-cells = <2>; }; - cpu@1 { + + cpu1: cpu@1 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; - cpu@2 { + cpu2: cpu@2 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { operating-points-v2 = <&cpu0_opp_table>; cpu-supply = <&vdd_cpu>; + #cooling-cells = <2>; }; }; @@ -455,7 +460,10 @@ }; map1 { trip = <&cpu_alert1>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi index cbe84d25e726..2c9780319725 100644 --- a/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi +++ b/arch/arm/boot/dts/tegra30-peripherals-opp.dtsi @@ -128,12 +128,14 @@ opp-microvolt = <1000000 1000000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0007>; + opp-suspend; }; opp@204000000,1250 { opp-microvolt = <1250000 1250000 1350000>; opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x0008>; + opp-suspend; }; opp@333500000,1000 { @@ -312,6 +314,7 @@ opp-hz = /bits/ 64 <204000000>; opp-supported-hw = <0x000F>; opp-peak-kBps = <1632000>; + opp-suspend; }; opp@333500000 { diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi index b0b15c97306b..e81e5937a60a 100644 --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi @@ -583,7 +583,7 @@ clocks = <&sys_clk 6>; reset-names = "ether"; resets = <&sys_rst 6>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; local-mac-address = [00 00 00 00 00 00]; socionext,syscon-phy-mode = <&soc_glue 0>; diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index 6403b064e8dc..06c888a45eb3 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -46,6 +46,7 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y +CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y @@ -53,7 +54,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_FASTMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -131,6 +132,8 @@ CONFIG_MEDIA_SUPPORT_FILTER=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISI=y CONFIG_VIDEO_OV2640=m diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 81665b7abf83..a49e699e52de 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -213,7 +213,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_EZX_PCAP=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_PCAP=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index ae15a2a33802..118c4c927f26 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -194,7 +194,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_PMIC_DA903X=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y -CONFIG_REGULATOR_USERSPACE_CONSUMER=y CONFIG_REGULATOR_DA903X=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 9f862b21b40a..80a3ae02d759 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -33,6 +33,8 @@ CONFIG_SOC_IMX25=y CONFIG_SOC_IMX27=y CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y +CONFIG_ARCH_NPCM=y +CONFIG_ARCH_WPCM450=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -178,6 +180,7 @@ CONFIG_THERMAL=y CONFIG_KIRKWOOD_THERMAL=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_NPCM7XX_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_MFD_ATMEL_HLCDC=y # CONFIG_ABX500_CORE is not set diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 3823da605430..52a0400fdd92 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -79,7 +79,7 @@ CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_RENESAS=y -CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_INTEL_SOCFPGA=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y @@ -791,7 +791,6 @@ CONFIG_USB_XHCI_MVEBU=y CONFIG_USB_XHCI_TEGRA=m CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_STI=y -CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_EHCI_EXYNOS=m CONFIG_USB_EHCI_MV=m CONFIG_USB_OHCI_HCD=y @@ -817,6 +816,7 @@ CONFIG_USB_DWC2=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_CHIPIDEA_TEGRA=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y CONFIG_AB8500_USB=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index f250bf1cc022..77b4bea12feb 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -87,6 +87,155 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y CONFIG_NETFILTER=y +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_CONNLIMIT=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +CONFIG_NFT_TUNNEL=m +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB_INET=m +CONFIG_NFT_XFRM=m +CONFIG_NFT_SOCKET=m +CONFIG_NFT_OSF=m +CONFIG_NFT_TPROXY=m +CONFIG_NFT_SYNPROXY=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +CONFIG_NFT_REJECT_NETDEV=m +CONFIG_NF_FLOW_TABLE_INET=m +CONFIG_NF_FLOW_TABLE=m +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_FLOW_TABLE_IPV4=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_FLOW_TABLE_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_SRH=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_TABLES_BRIDGE=m +CONFIG_NFT_BRIDGE_META=m +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m CONFIG_BRIDGE=m CONFIG_BRIDGE_VLAN_FILTERING=y CONFIG_VLAN_8021Q=m @@ -137,7 +286,6 @@ CONFIG_PCI_EPF_TEST=m CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OMAP_OCP2SCP=y -CONFIG_SIMPLE_PM_BUS=y CONFIG_CONNECTOR=m CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y @@ -165,6 +313,7 @@ CONFIG_SENSORS_TSL2550=m CONFIG_SRAM=y CONFIG_PCI_ENDPOINT_TEST=m CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_AT25=m CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index bd7dd81c9c54..875a3c28a267 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -415,7 +415,6 @@ CONFIG_MFD_TC6393XB=y CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y CONFIG_REGULATOR_FIXED_VOLTAGE=m -CONFIG_REGULATOR_USERSPACE_CONSUMER=m CONFIG_REGULATOR_ACT8865=m CONFIG_REGULATOR_AS3711=m CONFIG_REGULATOR_AXP20X=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 3f36887e8333..26353cbfa968 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -215,6 +215,8 @@ CONFIG_DMADEVICES=y CONFIG_QCOM_BAM_DMA=y CONFIG_STAGING=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_A7PLL=y +CONFIG_QCOM_CLK_APCS_SDX55=y CONFIG_QCOM_CLK_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_QCOM_CLK_SMD_RPM=y @@ -232,11 +234,14 @@ CONFIG_ARM_SMMU=y CONFIG_HWSPINLOCK=y CONFIG_HWSPINLOCK_QCOM=y CONFIG_MAILBOX=y +CONFIG_QCOM_APCS_IPC=y CONFIG_REMOTEPROC=y CONFIG_QCOM_ADSP_PIL=y +CONFIG_QCOM_Q6V5_PAS=y CONFIG_QCOM_Q6V5_PIL=y CONFIG_QCOM_WCNSS_PIL=y CONFIG_RPMSG_CHAR=y +CONFIG_RPMSG_QCOM_GLINK_SMEM=y CONFIG_RPMSG_QCOM_SMD=y CONFIG_QCOM_COMMAND_DB=y CONFIG_QCOM_GSBI=y @@ -273,6 +278,7 @@ CONFIG_QCOM_QFPROM=y CONFIG_INTERCONNECT=y CONFIG_INTERCONNECT_QCOM=y CONFIG_INTERCONNECT_QCOM_MSM8974=m +CONFIG_INTERCONNECT_QCOM_SDX55=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT3_FS=y @@ -290,7 +296,7 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=256 +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y @@ -299,3 +305,5 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_WATCHDOG=y CONFIG_QCOM_WDT=y CONFIG_ARM_PSCI=y +CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_DT=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index f4c3c0652432..17db3b3e2dd3 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -8,11 +8,6 @@ CONFIG_CGROUPS=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_AT91=y CONFIG_SOC_SAMA5D2=y CONFIG_SOC_SAMA5D3=y @@ -25,9 +20,14 @@ CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_KERNEL_MODE_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -55,6 +55,7 @@ CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_MTD=y +CONFIG_MTD_TESTS=m CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y @@ -62,7 +63,7 @@ CONFIG_MTD_RAW_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y +CONFIG_MTD_UBI_FASTMAP=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=4 @@ -75,8 +76,8 @@ CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MICROCHIP_KSZ9477=m CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m -CONFIG_MACB=y # CONFIG_NET_VENDOR_BROADCOM is not set +CONFIG_MACB=y # CONFIG_NET_VENDOR_CIRRUS is not set # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_INTEL is not set @@ -89,9 +90,12 @@ CONFIG_MACB=y # CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_NET_VENDOR_WIZNET is not set CONFIG_MICREL_PHY=y +CONFIG_USB_LAN78XX=m CONFIG_LIBERTAS_THINFIRM=m CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_RTL8187=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_USB=m CONFIG_RT2X00=m CONFIG_RT2500USB=m CONFIG_RT73USB=m @@ -99,10 +103,7 @@ CONFIG_RT2800USB=m CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y CONFIG_RT2800USB_UNKNOWN=y -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_USB=m -# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_RTL8187=m CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_QT1070=y @@ -124,10 +125,10 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_ATMEL_QUADSPI=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_SAMA5D2_PIOBU=m +CONFIG_GPIO_SAMA5D2_PIOBU=y +CONFIG_POWER_RESET=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_ACT8945A=y -CONFIG_POWER_RESET=y CONFIG_SENSORS_JC42=m CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y @@ -139,13 +140,15 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_ACT8945A=y -CONFIG_REGULATOR_MCP16502=m +CONFIG_REGULATOR_MCP16502=y CONFIG_REGULATOR_PWM=m CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_SUPPORT_FILTER=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_PLATFORM_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_VIDEO_ATMEL_ISC=y CONFIG_VIDEO_ATMEL_ISI=y @@ -166,11 +169,12 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_ATMEL_SOC=y CONFIG_SND_ATMEL_SOC_WM8904=y -# CONFIG_HID_GENERIC is not set CONFIG_SND_ATMEL_SOC_CLASSD=y CONFIG_SND_ATMEL_SOC_PDMIC=y CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m CONFIG_SND_ATMEL_SOC_I2S=y +CONFIG_SND_SOC_MIKROE_PROTO=m +# CONFIG_HID_GENERIC is not set CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_EHCI_HCD=y @@ -201,6 +205,9 @@ CONFIG_RTC_DRV_AT91RM9200=y CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_AT_XDMAC=y +CONFIG_STAGING=y +CONFIG_STAGING_MEDIA=y +CONFIG_VIDEO_HANTRO=m # CONFIG_IOMMU_SUPPORT is not set CONFIG_IIO=y CONFIG_AT91_ADC=y @@ -224,14 +231,14 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_DEV_ATMEL_AES=y +CONFIG_CRYPTO_DEV_ATMEL_TDES=y +CONFIG_CRYPTO_DEV_ATMEL_SHA=y CONFIG_STRIP_ASM_SYMS=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_SCHED_DEBUG is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_DEV_ATMEL_AES=y -CONFIG_CRYPTO_DEV_ATMEL_TDES=y -CONFIG_CRYPTO_DEV_ATMEL_SHA=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 01a6ebdf033a..f25b09efb816 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -220,6 +220,5 @@ CONFIG_NLS_ISO8859_1=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_PRINTK_TIME=y -# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 0c60eb382c80..2d9404ea52c6 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -9,7 +9,7 @@ CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y CONFIG_EMBEDDED=y CONFIG_PROFILING=y -CONFIG_ARCH_SOCFPGA=y +CONFIG_ARCH_INTEL_SOCFPGA=y CONFIG_ARM_THUMBEE=y CONFIG_SMP=y CONFIG_NR_CPUS=2 diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index bcedfe1422aa..dbb1ef601762 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -55,6 +55,7 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_NOMADIK=y CONFIG_KEYBOARD_STMPE=y CONFIG_KEYBOARD_TC3589X=y +CONFIG_KEYBOARD_TM2_TOUCHKEY=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y @@ -74,10 +75,12 @@ CONFIG_SERIAL_DEV_BUS=y CONFIG_HW_RANDOM=y CONFIG_I2C_GPIO=y CONFIG_SPI=y +CONFIG_SPI_GPIO=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y CONFIG_SENSORS_IIO_HWMON=y +CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y @@ -85,6 +88,10 @@ CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_GPIO=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_V4L2_FLASH_LED_CLASS=y CONFIG_DRM=y CONFIG_DRM_PANEL_NOVATEK_NT35510=y CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y @@ -112,10 +119,12 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_CLASS_FLASH=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_LP55XX_COMMON=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_RT8515=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -124,16 +133,21 @@ CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_HWSPINLOCK=y CONFIG_HSEM_U8500=y +CONFIG_EXTCON_FSA9480=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y CONFIG_BMA180=y +CONFIG_BMC150_ACCEL=y CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_RESCALE=y +CONFIG_MPU3050_I2C=y CONFIG_IIO_ST_GYRO_3AXIS=y CONFIG_INV_MPU6050_I2C=y CONFIG_BH1780=y CONFIG_GP2AP002=y CONFIG_AK8974=y CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_YAMAHA_YAS530=y CONFIG_IIO_HRTIMER_TRIGGER=y CONFIG_IIO_ST_PRESS=y CONFIG_EXT2_FS=y diff --git a/arch/arm/crypto/aes-cipher-core.S b/arch/arm/crypto/aes-cipher-core.S index 472e56d09eea..1da3f41359aa 100644 --- a/arch/arm/crypto/aes-cipher-core.S +++ b/arch/arm/crypto/aes-cipher-core.S @@ -99,28 +99,6 @@ __hround \out2, \out3, \in2, \in1, \in0, \in3, \in1, \in0, 0, \sz, \op, \oldcpsr .endm - .macro __rev, out, in - .if __LINUX_ARM_ARCH__ < 6 - lsl t0, \in, #24 - and t1, \in, #0xff00 - and t2, \in, #0xff0000 - orr \out, t0, \in, lsr #24 - orr \out, \out, t1, lsl #8 - orr \out, \out, t2, lsr #8 - .else - rev \out, \in - .endif - .endm - - .macro __adrl, out, sym, c - .if __LINUX_ARM_ARCH__ < 7 - ldr\c \out, =\sym - .else - movw\c \out, #:lower16:\sym - movt\c \out, #:upper16:\sym - .endif - .endm - .macro do_crypt, round, ttab, ltab, bsz push {r3-r11, lr} @@ -133,10 +111,10 @@ ldr r7, [in, #12] #ifdef CONFIG_CPU_BIG_ENDIAN - __rev r4, r4 - __rev r5, r5 - __rev r6, r6 - __rev r7, r7 + rev_l r4, t0 + rev_l r5, t0 + rev_l r6, t0 + rev_l r7, t0 #endif eor r4, r4, r8 @@ -144,7 +122,7 @@ eor r6, r6, r10 eor r7, r7, r11 - __adrl ttab, \ttab + mov_l ttab, \ttab /* * Disable interrupts and prefetch the 1024-byte 'ft' or 'it' table into * L1 cache, assuming cacheline size >= 32. This is a hardening measure @@ -180,7 +158,7 @@ 2: .ifb \ltab add ttab, ttab, #1 .else - __adrl ttab, \ltab + mov_l ttab, \ltab // Prefetch inverse S-box for final round; see explanation above .set i, 0 .rept 256 / 64 @@ -194,10 +172,10 @@ \round r4, r5, r6, r7, r8, r9, r10, r11, \bsz, b, rounds #ifdef CONFIG_CPU_BIG_ENDIAN - __rev r4, r4 - __rev r5, r5 - __rev r6, r6 - __rev r7, r7 + rev_l r4, t0 + rev_l r5, t0 + rev_l r6, t0 + rev_l r7, t0 #endif ldr out, [sp] diff --git a/arch/arm/crypto/blake2b-neon-glue.c b/arch/arm/crypto/blake2b-neon-glue.c index 34d73200e7fa..4b59d027ba4a 100644 --- a/arch/arm/crypto/blake2b-neon-glue.c +++ b/arch/arm/crypto/blake2b-neon-glue.c @@ -85,8 +85,8 @@ static int __init blake2b_neon_mod_init(void) static void __exit blake2b_neon_mod_exit(void) { - return crypto_unregister_shashes(blake2b_neon_algs, - ARRAY_SIZE(blake2b_neon_algs)); + crypto_unregister_shashes(blake2b_neon_algs, + ARRAY_SIZE(blake2b_neon_algs)); } module_init(blake2b_neon_mod_init); diff --git a/arch/arm/crypto/blake2s-core.S b/arch/arm/crypto/blake2s-core.S index bed897e9a181..86345751bbf3 100644 --- a/arch/arm/crypto/blake2s-core.S +++ b/arch/arm/crypto/blake2s-core.S @@ -8,6 +8,7 @@ */ #include <linux/linkage.h> +#include <asm/assembler.h> // Registers used to hold message words temporarily. There aren't // enough ARM registers to hold the whole message block, so we have to @@ -38,6 +39,23 @@ #endif .endm +.macro _le32_bswap a, tmp +#ifdef __ARMEB__ + rev_l \a, \tmp +#endif +.endm + +.macro _le32_bswap_8x a, b, c, d, e, f, g, h, tmp + _le32_bswap \a, \tmp + _le32_bswap \b, \tmp + _le32_bswap \c, \tmp + _le32_bswap \d, \tmp + _le32_bswap \e, \tmp + _le32_bswap \f, \tmp + _le32_bswap \g, \tmp + _le32_bswap \h, \tmp +.endm + // Execute a quarter-round of BLAKE2s by mixing two columns or two diagonals. // (a0, b0, c0, d0) and (a1, b1, c1, d1) give the registers containing the two // columns/diagonals. s0-s1 are the word offsets to the message words the first @@ -180,8 +198,10 @@ ENTRY(blake2s_compress_arch) tst r1, #3 bne .Lcopy_block_misaligned ldmia r1!, {r2-r9} + _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14 stmia r12!, {r2-r9} ldmia r1!, {r2-r9} + _le32_bswap_8x r2, r3, r4, r5, r6, r7, r8, r9, r14 stmia r12, {r2-r9} .Lcopy_block_done: str r1, [sp, #68] // Update message pointer @@ -268,6 +288,7 @@ ENTRY(blake2s_compress_arch) 1: #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ldr r3, [r1], #4 + _le32_bswap r3, r4 #else ldrb r3, [r1, #0] ldrb r4, [r1, #1] diff --git a/arch/arm/crypto/chacha-scalar-core.S b/arch/arm/crypto/chacha-scalar-core.S index 2985b80a45b5..083fe1ab96d0 100644 --- a/arch/arm/crypto/chacha-scalar-core.S +++ b/arch/arm/crypto/chacha-scalar-core.S @@ -41,32 +41,15 @@ X14 .req r12 X15 .req r14 -.macro __rev out, in, t0, t1, t2 -.if __LINUX_ARM_ARCH__ >= 6 - rev \out, \in -.else - lsl \t0, \in, #24 - and \t1, \in, #0xff00 - and \t2, \in, #0xff0000 - orr \out, \t0, \in, lsr #24 - orr \out, \out, \t1, lsl #8 - orr \out, \out, \t2, lsr #8 -.endif -.endm - -.macro _le32_bswap x, t0, t1, t2 +.macro _le32_bswap_4x a, b, c, d, tmp #ifdef __ARMEB__ - __rev \x, \x, \t0, \t1, \t2 + rev_l \a, \tmp + rev_l \b, \tmp + rev_l \c, \tmp + rev_l \d, \tmp #endif .endm -.macro _le32_bswap_4x a, b, c, d, t0, t1, t2 - _le32_bswap \a, \t0, \t1, \t2 - _le32_bswap \b, \t0, \t1, \t2 - _le32_bswap \c, \t0, \t1, \t2 - _le32_bswap \d, \t0, \t1, \t2 -.endm - .macro __ldrd a, b, src, offset #if __LINUX_ARM_ARCH__ >= 6 ldrd \a, \b, [\src, #\offset] @@ -200,7 +183,7 @@ add X1, X1, r9 add X2, X2, r10 add X3, X3, r11 - _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + _le32_bswap_4x X0, X1, X2, X3, r8 ldmia r12!, {r8-r11} eor X0, X0, r8 eor X1, X1, r9 @@ -216,7 +199,7 @@ ldmia r12!, {X0-X3} add X6, r10, X6, ror #brot add X7, r11, X7, ror #brot - _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + _le32_bswap_4x X4, X5, X6, X7, r8 eor X4, X4, X0 eor X5, X5, X1 eor X6, X6, X2 @@ -231,7 +214,7 @@ add r1, r1, r9 // x9 add r6, r6, r10 // x10 add r7, r7, r11 // x11 - _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + _le32_bswap_4x r0, r1, r6, r7, r8 ldmia r12!, {r8-r11} eor r0, r0, r8 // x8 eor r1, r1, r9 // x9 @@ -245,7 +228,7 @@ add r3, r9, r3, ror #drot // x13 add r4, r10, r4, ror #drot // x14 add r5, r11, r5, ror #drot // x15 - _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + _le32_bswap_4x r2, r3, r4, r5, r9 ldr r9, [sp, #72] // load LEN eor r2, r2, r0 // x12 eor r3, r3, r1 // x13 @@ -301,7 +284,7 @@ add X1, X1, r9 add X2, X2, r10 add X3, X3, r11 - _le32_bswap_4x X0, X1, X2, X3, r8, r9, r10 + _le32_bswap_4x X0, X1, X2, X3, r8 stmia r14!, {X0-X3} // Save keystream for x4-x7 @@ -311,7 +294,7 @@ add X5, r9, X5, ror #brot add X6, r10, X6, ror #brot add X7, r11, X7, ror #brot - _le32_bswap_4x X4, X5, X6, X7, r8, r9, r10 + _le32_bswap_4x X4, X5, X6, X7, r8 add r8, sp, #64 stmia r14!, {X4-X7} @@ -323,7 +306,7 @@ add r1, r1, r9 // x9 add r6, r6, r10 // x10 add r7, r7, r11 // x11 - _le32_bswap_4x r0, r1, r6, r7, r8, r9, r10 + _le32_bswap_4x r0, r1, r6, r7, r8 stmia r14!, {r0,r1,r6,r7} __ldrd r8, r9, sp, 144 __ldrd r10, r11, sp, 152 @@ -331,7 +314,7 @@ add r3, r9, r3, ror #drot // x13 add r4, r10, r4, ror #drot // x14 add r5, r11, r5, ror #drot // x15 - _le32_bswap_4x r2, r3, r4, r5, r9, r10, r11 + _le32_bswap_4x r2, r3, r4, r5, r9 stmia r14, {r2-r5} // Stack: ks0-ks15 unused0-unused7 x0-x15 OUT IN LEN diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S index be18af52e7dc..b697fa5d059a 100644 --- a/arch/arm/crypto/curve25519-core.S +++ b/arch/arm/crypto/curve25519-core.S @@ -10,8 +10,8 @@ #include <linux/linkage.h> .text -.fpu neon .arch armv7-a +.fpu neon .align 4 ENTRY(curve25519_neon) diff --git a/arch/arm/crypto/poly1305-glue.c b/arch/arm/crypto/poly1305-glue.c index 3023c1acfa19..c31bd8f7c092 100644 --- a/arch/arm/crypto/poly1305-glue.c +++ b/arch/arm/crypto/poly1305-glue.c @@ -29,7 +29,7 @@ void __weak poly1305_blocks_neon(void *state, const u8 *src, u32 len, u32 hibit) static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon); -void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 *key) +void poly1305_init_arch(struct poly1305_desc_ctx *dctx, const u8 key[POLY1305_KEY_SIZE]) { poly1305_init_arm(&dctx->h, key); dctx->s[0] = get_unaligned_le32(key + 16); diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h index df8524365637..bd61502b9715 100644 --- a/arch/arm/include/asm/hypervisor.h +++ b/arch/arm/include/asm/hypervisor.h @@ -4,4 +4,7 @@ #include <asm/xen/hypervisor.h> +void kvm_init_hyp_services(void); +bool kvm_arm_hyp_service_available(u32 func_id); + #endif diff --git a/arch/arm/include/asm/paravirt.h b/arch/arm/include/asm/paravirt.h index cdbf02d9c1d4..95d5b0d625cd 100644 --- a/arch/arm/include/asm/paravirt.h +++ b/arch/arm/include/asm/paravirt.h @@ -3,23 +3,19 @@ #define _ASM_ARM_PARAVIRT_H #ifdef CONFIG_PARAVIRT +#include <linux/static_call_types.h> + struct static_key; extern struct static_key paravirt_steal_enabled; extern struct static_key paravirt_steal_rq_enabled; -struct pv_time_ops { - unsigned long long (*steal_clock)(int cpu); -}; - -struct paravirt_patch_template { - struct pv_time_ops time; -}; +u64 dummy_steal_clock(int cpu); -extern struct paravirt_patch_template pv_ops; +DECLARE_STATIC_CALL(pv_steal_clock, dummy_steal_clock); static inline u64 paravirt_steal_clock(int cpu) { - return pv_ops.time.steal_clock(cpu); + return static_call(pv_steal_clock)(cpu); } #endif diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 2b85d175e999..d4edab51a77c 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -186,8 +186,6 @@ static inline pte_t pte_mkspecial(pte_t pte) #define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY)) #define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) -#define pud_page(pud) pmd_page(__pmd(pud_val(pud))) -#define pud_write(pud) pmd_write(__pmd(pud_val(pud))) #define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd)) #define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd)) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index c02f24400369..d63a5bb6bd0c 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -166,6 +166,9 @@ extern struct page *empty_zero_page; extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +#define pud_page(pud) pmd_page(__pmd(pud_val(pud))) +#define pud_write(pud) pmd_write(__pmd(pud_val(pud))) + #define pmd_none(pmd) (!pmd_val(pmd)) static inline pte_t *pmd_page_vaddr(pmd_t pmd) diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 8f009e788ad4..f610a773f2be 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -22,7 +22,7 @@ * assembler to insert a extra (16-bit) IT instruction, depending on the * presence or absence of neighbouring conditional instructions. * - * To avoid this unpredictableness, an approprite IT is inserted explicitly: + * To avoid this unpredictability, an appropriate IT is inserted explicitly: * the assembler won't change IT instructions which are explicitly present * in the input. */ diff --git a/arch/arm/include/asm/xen/swiotlb-xen.h b/arch/arm/include/asm/xen/swiotlb-xen.h new file mode 100644 index 000000000000..455ade5d5320 --- /dev/null +++ b/arch/arm/include/asm/xen/swiotlb-xen.h @@ -0,0 +1 @@ +#include <xen/arm/swiotlb-xen.h> diff --git a/arch/arm/kernel/paravirt.c b/arch/arm/kernel/paravirt.c index 4cfed91fe256..7dd9806369fb 100644 --- a/arch/arm/kernel/paravirt.c +++ b/arch/arm/kernel/paravirt.c @@ -9,10 +9,15 @@ #include <linux/export.h> #include <linux/jump_label.h> #include <linux/types.h> +#include <linux/static_call.h> #include <asm/paravirt.h> struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; -struct paravirt_patch_template pv_ops; -EXPORT_SYMBOL_GPL(pv_ops); +static u64 native_steal_clock(int cpu) +{ + return 0; +} + +DEFINE_STATIC_CALL(pv_steal_clock, native_steal_clock); diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 120f9aa6fff3..90dcdfe3b3d0 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -17,6 +17,8 @@ #include <linux/clk/at91_pmc.h> #include <linux/platform_data/atmel.h> +#include <soc/at91/pm.h> + #include <asm/cacheflush.h> #include <asm/fncpy.h> #include <asm/system_misc.h> @@ -25,17 +27,6 @@ #include "generic.h" #include "pm.h" -/* - * FIXME: this is needed to communicate between the pinctrl driver and - * the PM implementation in the machine. Possibly part of the PM - * implementation should be moved down into the pinctrl driver and get - * called as part of the generic suspend/resume path. - */ -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#endif - struct at91_soc_pm { int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity); int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity); @@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state) static int at91_pm_enter(suspend_state_t state) { #ifdef CONFIG_PINCTRL_AT91 + /* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ at91_pinctrl_gpio_suspend(); #endif diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index a20ba12d876c..823c9cc98f18 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -454,6 +454,10 @@ static const struct property_entry da830_evm_i2c_eeprom_properties[] = { { } }; +static const struct software_node da830_evm_i2c_eeprom_node = { + .properties = da830_evm_i2c_eeprom_properties, +}; + static int __init da830_evm_ui_expander_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *context) { @@ -485,7 +489,7 @@ static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = { static struct i2c_board_info __initdata da830_evm_i2c_devices[] = { { I2C_BOARD_INFO("24c256", 0x50), - .properties = da830_evm_i2c_eeprom_properties, + .swnode = &da830_evm_i2c_eeprom_node, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index bdf31eb77620..b3bef74c982a 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -232,10 +232,14 @@ static const struct property_entry eeprom_properties[] = { { } }; +static const struct software_node eeprom_node = { + .properties = eeprom_properties, +}; + static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .properties = eeprom_properties, + .swnode = &eeprom_node, }, { I2C_BOARD_INFO("tlv320aic3x", 0x18), diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 7755cccec550..cce3a621eb20 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -541,6 +541,10 @@ static const struct property_entry eeprom_properties[] = { { } }; +static const struct software_node eeprom_node = { + .properties = eeprom_properties, +}; + /* * MSP430 supports RTC, card detection, input from IR remote, and * a bit more. It triggers interrupts on GPIO(7) from pressing @@ -647,7 +651,7 @@ static struct i2c_board_info __initdata i2c_info[] = { }, { I2C_BOARD_INFO("24c256", 0x50), - .properties = eeprom_properties, + .swnode = &eeprom_node, }, { I2C_BOARD_INFO("tlv320aic33", 0x1b), diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 952ddabc743e..ee91d81ebbfd 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -362,6 +362,10 @@ static const struct property_entry eeprom_properties[] = { PROPERTY_ENTRY_U32("pagesize", 64), { } }; + +static const struct software_node eeprom_node = { + .properties = eeprom_properties, +}; #endif static u8 dm646x_iis_serializer_direction[] = { @@ -430,7 +434,7 @@ static void evm_init_cpld(void) static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), - .properties = eeprom_properties, + .swnode = &eeprom_node, }, { I2C_BOARD_INFO("pcf8574a", 0x38), diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 5205008c8061..2127969beb96 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -197,6 +197,10 @@ static const struct property_entry mityomapl138_fd_chip_properties[] = { { } }; +static const struct software_node mityomapl138_fd_chip_node = { + .properties = mityomapl138_fd_chip_properties, +}; + static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { .bus_freq = 100, /* kHz */ .bus_delay = 0, /* usec */ @@ -323,7 +327,7 @@ static struct i2c_board_info __initdata mityomap_tps65023_info[] = { }, { I2C_BOARD_INFO("24c02", 0x50), - .properties = mityomapl138_fd_chip_properties, + .swnode = &mityomapl138_fd_chip_node, }, }; diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 79b47958e992..6930b2f485d1 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -84,10 +84,14 @@ static const struct property_entry eeprom_properties[] = { { } }; +static const struct software_node eeprom_node = { + .properties = eeprom_properties, +}; + static struct i2c_board_info __initdata i2c_info[] = { { I2C_BOARD_INFO("24c64", 0x50), - .properties = eeprom_properties, + .swnode = &eeprom_node, }, /* Other I2C devices: * MSP430, addr 0x23 (not used) diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index ea0be59f469a..fb4a394ece3a 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -78,12 +78,11 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) #endif /* CONFIG_HOTPLUG_CPU */ /** - * exynos_core_power_down : power down the specified cpu - * @cpu : the cpu to power down + * exynos_cpu_power_down() - power down the specified cpu + * @cpu: the cpu to power down * * Power down the specified cpu. The sequence must be finished by a * call to cpu_do_idle() - * */ void exynos_cpu_power_down(int cpu) { @@ -107,8 +106,8 @@ void exynos_cpu_power_down(int cpu) } /** - * exynos_cpu_power_up : power up the specified cpu - * @cpu : the cpu to power up + * exynos_cpu_power_up() - power up the specified cpu + * @cpu: the cpu to power up * * Power up the specified cpu */ @@ -124,9 +123,8 @@ void exynos_cpu_power_up(int cpu) } /** - * exynos_cpu_power_state : returns the power state of the cpu - * @cpu : the cpu to retrieve the power state from - * + * exynos_cpu_power_state() - returns the power state of the cpu + * @cpu: the cpu to retrieve the power state from */ int exynos_cpu_power_state(int cpu) { @@ -135,8 +133,8 @@ int exynos_cpu_power_state(int cpu) } /** - * exynos_cluster_power_down : power down the specified cluster - * @cluster : the cluster to power down + * exynos_cluster_power_down() - power down the specified cluster + * @cluster: the cluster to power down */ void exynos_cluster_power_down(int cluster) { @@ -144,8 +142,8 @@ void exynos_cluster_power_down(int cluster) } /** - * exynos_cluster_power_up : power up the specified cluster - * @cluster : the cluster to power up + * exynos_cluster_power_up() - power up the specified cluster + * @cluster: the cluster to power up */ void exynos_cluster_power_up(int cluster) { @@ -154,8 +152,8 @@ void exynos_cluster_power_up(int cluster) } /** - * exynos_cluster_power_state : returns the power state of the cluster - * @cluster : the cluster to retrieve the power state from + * exynos_cluster_power_state() - returns the power state of the cluster + * @cluster: the cluster to retrieve the power state from * */ int exynos_cluster_power_state(int cluster) @@ -165,7 +163,7 @@ int exynos_cluster_power_state(int cluster) } /** - * exynos_scu_enable : enables SCU for Cortex-A9 based system + * exynos_scu_enable() - enables SCU for Cortex-A9 based system */ void exynos_scu_enable(void) { diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index 0b2fd7e2e9b4..90b1e9be430e 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -15,14 +15,14 @@ #include <asm/mach-types.h> /* cats host-specific stuff */ -static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; +static int irqmap_cats[] = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; static u8 cats_no_swizzle(struct pci_dev *dev, u8 *pin) { return 0; } -static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->irq >= 255) return -1; /* not a valid interrupt. */ diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c index 6f28aaa9ca79..c3f280d08fa7 100644 --- a/arch/arm/mach-footbridge/ebsa285-pci.c +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -14,9 +14,9 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; +static int irqmap_ebsa285[] = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; -static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->vendor == PCI_VENDOR_ID_CONTAQ && dev->device == PCI_DEVICE_ID_CONTAQ_82C693) diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c index 9473aa0305e5..e8304392074b 100644 --- a/arch/arm/mach-footbridge/netwinder-pci.c +++ b/arch/arm/mach-footbridge/netwinder-pci.c @@ -18,7 +18,7 @@ * We now use the slot ID instead of the device identifiers to select * which interrupt is routed where. */ -static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +static int netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: /* host bridge */ diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c index 4391e433a4b2..9d19aa98a663 100644 --- a/arch/arm/mach-footbridge/personal-pci.c +++ b/arch/arm/mach-footbridge/personal-pci.c @@ -14,13 +14,12 @@ #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int irqmap_personal_server[] __initdata = { +static int irqmap_personal_server[] = { IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0, IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI }; -static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) +static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { unsigned char line; diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 07ea28b99cd0..b8d14b369cc9 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * (Hisilicon's SoC based) flattened device tree enabled machine + * (HiSilicon's SoC based) flattened device tree enabled machine * - * Copyright (c) 2012-2013 Hisilicon Ltd. + * Copyright (c) 2012-2013 HiSilicon Ltd. * Copyright (c) 2012-2013 Linaro Ltd. * * Author: Haojian Zhuang <haojian.zhuang@linaro.org> diff --git a/arch/arm/mach-hisi/hotplug.c b/arch/arm/mach-hisi/hotplug.c index 5c5f255abc3a..c517941416f1 100644 --- a/arch/arm/mach-hisi/hotplug.c +++ b/arch/arm/mach-hisi/hotplug.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. - * Copyright (c) 2013 Hisilicon Limited. + * Copyright (c) 2013 HiSilicon Limited. */ #include <linux/cpu.h> diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c index f155e32f8420..96a484095194 100644 --- a/arch/arm/mach-hisi/platmcpm.c +++ b/arch/arm/mach-hisi/platmcpm.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013-2014 Linaro Ltd. - * Copyright (c) 2013-2014 Hisilicon Limited. + * Copyright (c) 2013-2014 HiSilicon Limited. */ #include <linux/init.h> #include <linux/smp.h> diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index da7a09c1dae5..a56cc64deeb8 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2013 Linaro Ltd. - * Copyright (c) 2013 Hisilicon Limited. + * Copyright (c) 2013 HiSilicon Limited. * Based on arch/arm/mach-vexpress/platsmp.c, Copyright (C) 2002 ARM Ltd. */ #include <linux/smp.h> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 52902782cc5f..b407b024dde3 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -63,7 +63,7 @@ config SOC_IMX35 select MXC_AVIC select PINCTRL_IMX35 help - This enables support for Freescale i.MX31 processor + This enables support for Freescale i.MX35 processor endif diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 322caa21bcb3..21bce4049cec 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -7,6 +7,7 @@ #include <linux/module.h> #include <linux/irq.h> #include <linux/irqdomain.h> +#include <linux/irqchip.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_address.h> @@ -162,7 +163,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init mxc_init_irq(void __iomem *irqbase) +static void __init mxc_init_irq(void __iomem *irqbase) { struct device_node *np; int irq_base; @@ -220,3 +221,16 @@ void __init mxc_init_irq(void __iomem *irqbase) printk(KERN_INFO "MXC IRQ initialized\n"); } + +static int __init imx_avic_init(struct device_node *node, + struct device_node *parent) +{ + void __iomem *avic_base; + + avic_base = of_iomap(node, 0); + BUG_ON(!avic_base); + mxc_init_irq(avic_base); + return 0; +} + +IRQCHIP_DECLARE(imx_avic, "fsl,avic", imx_avic_init); diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 2b004cc4f95e..474dedb73bc7 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -22,7 +22,6 @@ void mx35_map_io(void); void imx21_init_early(void); void imx31_init_early(void); void imx35_init_early(void); -void mxc_init_irq(void __iomem *); void mx31_init_irq(void); void mx35_init_irq(void); void mxc_set_cpu_type(unsigned int type); diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c index 32df3b8012f9..8eca92d66a2e 100644 --- a/arch/arm/mach-imx/mach-imx1.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -17,16 +17,6 @@ static void __init imx1_init_early(void) mxc_set_cpu_type(MXC_CPU_MX1); } -static void __init imx1_init_irq(void) -{ - void __iomem *avic_addr; - - avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); - WARN_ON(!avic_addr); - - mxc_init_irq(avic_addr); -} - static const char * const imx1_dt_board_compat[] __initconst = { "fsl,imx1", NULL @@ -34,7 +24,6 @@ static const char * const imx1_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") .init_early = imx1_init_early, - .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c index 95de48a1aa7d..51927bd08aef 100644 --- a/arch/arm/mach-imx/mach-imx25.c +++ b/arch/arm/mach-imx/mach-imx25.c @@ -22,17 +22,6 @@ static void __init imx25_dt_init(void) imx_aips_allow_unprivileged_access("fsl,imx25-aips"); } -static void __init mx25_init_irq(void) -{ - struct device_node *np; - void __iomem *avic_base; - - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - mxc_init_irq(avic_base); -} - static const char * const imx25_dt_board_compat[] __initconst = { "fsl,imx25", NULL @@ -42,6 +31,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .init_early = imx25_init_early, .init_machine = imx25_dt_init, .init_late = imx25_pm_init, - .init_irq = mx25_init_irq, .dt_compat = imx25_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c index 262422a9c196..e325c9468105 100644 --- a/arch/arm/mach-imx/mach-imx27.c +++ b/arch/arm/mach-imx/mach-imx27.c @@ -56,17 +56,6 @@ static void __init imx27_init_early(void) mxc_set_cpu_type(MXC_CPU_MX27); } -static void __init mx27_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - mxc_init_irq(avic_base); -} - static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL @@ -75,7 +64,6 @@ static const char * const imx27_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, - .init_irq = mx27_init_irq, .init_late = imx27_pm_init, .dt_compat = imx27_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx31.c b/arch/arm/mach-imx/mach-imx31.c index dc69dfe600df..e9a1092b6093 100644 --- a/arch/arm/mach-imx/mach-imx31.c +++ b/arch/arm/mach-imx/mach-imx31.c @@ -14,6 +14,5 @@ static const char * const imx31_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, - .init_irq = mx31_init_irq, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx35.c b/arch/arm/mach-imx/mach-imx35.c index ec5c3068715c..0fc08218b77d 100644 --- a/arch/arm/mach-imx/mach-imx35.c +++ b/arch/arm/mach-imx/mach-imx35.c @@ -27,6 +27,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") .l2c_aux_mask = ~0, .map_io = mx35_map_io, .init_early = imx35_init_early, - .init_irq = mx35_init_irq, .dt_compat = imx35_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 5056438e5b42..28db97289ee8 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -109,18 +109,6 @@ void __init imx31_init_early(void) mx3_ccm_base = of_iomap(np, 0); BUG_ON(!mx3_ccm_base); } - -void __init mx31_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - - mxc_init_irq(avic_base); -} #endif /* ifdef CONFIG_SOC_IMX31 */ #ifdef CONFIG_SOC_IMX35 @@ -158,16 +146,4 @@ void __init imx35_init_early(void) mx3_ccm_base = of_iomap(np, 0); BUG_ON(!mx3_ccm_base); } - -void __init mx35_init_irq(void) -{ - void __iomem *avic_base; - struct device_node *np; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic"); - avic_base = of_iomap(np, 0); - BUG_ON(!avic_base); - - mxc_init_irq(avic_base); -} #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index e9962b48e30c..2e3af2bc7758 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -45,7 +45,7 @@ * This is also the lowest power state possible without affecting * non-cpu parts of the system. For these reasons, imx5 should default * to always using this state for cpu idling. The PM_SUSPEND_STANDBY also - * uses this state and needs to take no action when registers remain confgiured + * uses this state and needs to take no action when registers remain configured * for this state. */ #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index cd711bfc591f..2c647bdf8d25 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -65,7 +65,7 @@ static void __init keystone_init(void) static long long __init keystone_pv_fixup(void) { long long offset; - phys_addr_t mem_start, mem_end; + u64 mem_start, mem_end; mem_start = memblock_start_of_DRAM(); mem_end = memblock_end_of_DRAM(); @@ -78,7 +78,7 @@ static long long __init keystone_pv_fixup(void) if (mem_start < KEYSTONE_HIGH_PHYS_START || mem_end > KEYSTONE_HIGH_PHYS_END) { pr_crit("Invalid address space for memory (%08llx-%08llx)\n", - (u64)mem_start, (u64)mem_end); + mem_start, mem_end); return 0; } diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig index 576d1ab293c8..cd300eeedc20 100644 --- a/arch/arm/mach-mstar/Kconfig +++ b/arch/arm/mach-mstar/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_MSTARV7 select ARM_GIC select ARM_HEAVY_MB select MST_IRQ + select MSTAR_MSC313_MPLL help Support for newer MStar/Sigmastar SoC families that are based on Armv7 cores like the Cortex A7 and share the same diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index ceaad6d5927e..06b1706595f4 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -84,6 +84,7 @@ static void __init kirkwood_dt_eth_fixup(void) struct device_node *pnp = of_get_parent(np); struct clk *clk; struct property *pmac; + u8 tmpmac[ETH_ALEN]; void __iomem *io; u8 *macaddr; u32 reg; @@ -93,7 +94,7 @@ static void __init kirkwood_dt_eth_fixup(void) /* skip disabled nodes or nodes with valid MAC address*/ if (!of_device_is_available(pnp) || - !IS_ERR(of_get_mac_address(np))) + !of_get_mac_address(np, tmpmac)) goto eth_fixup_skip; clk = of_clk_get(pnp, 0); diff --git a/arch/arm/mach-npcm/Kconfig b/arch/arm/mach-npcm/Kconfig index 7f7002dc2b21..658c8efb4ca1 100644 --- a/arch/arm/mach-npcm/Kconfig +++ b/arch/arm/mach-npcm/Kconfig @@ -1,11 +1,21 @@ # SPDX-License-Identifier: GPL-2.0-only menuconfig ARCH_NPCM bool "Nuvoton NPCM Architecture" - depends on ARCH_MULTI_V7 + depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 select PINCTRL if ARCH_NPCM +config ARCH_WPCM450 + bool "Support for WPCM450 BMC (Hermon)" + depends on ARCH_MULTI_V5 + select CPU_ARM926T + select NPCM7XX_TIMER + help + General support for WPCM450 BMC (Hermon). + + Winbond/Nuvoton WPCM450 BMC based on the ARM926EJ-S. + config ARCH_NPCM7XX bool "Support for NPCM7xx BMC (Poleg)" depends on ARCH_MULTI_V7 diff --git a/arch/arm/mach-npcm/Makefile b/arch/arm/mach-npcm/Makefile index 1bc3a70bfab8..8d61fcd42fb1 100644 --- a/arch/arm/mach-npcm/Makefile +++ b/arch/arm/mach-npcm/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only AFLAGS_headsmp.o += -march=armv7-a +obj-$(CONFIG_ARCH_WPCM450) += wpcm450.o obj-$(CONFIG_ARCH_NPCM7XX) += npcm7xx.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-npcm/wpcm450.c b/arch/arm/mach-npcm/wpcm450.c new file mode 100644 index 000000000000..f17b3dab45af --- /dev/null +++ b/arch/arm/mach-npcm/wpcm450.c @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright 2021 Jonathan Neuschäfer + +#include <asm/mach/arch.h> + +static const char *const wpcm450_dt_match[] = { + "nuvoton,wpcm450", + NULL +}; + +DT_MACHINE_START(WPCM450_DT, "WPCM450 chip") + .dt_compat = wpcm450_dt_match, +MACHINE_END diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 14a6c3eb3298..f745a65d3bd7 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -15,6 +15,7 @@ #include <linux/platform_data/gpio-omap.h> #include <asm/assembler.h> +#include <asm/irq.h> #include "ams-delta-fiq.h" #include "board-ams-delta.h" diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 0a4c9b0b13b0..e18b6f13300e 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -332,11 +332,15 @@ static const struct property_entry mistral_at24_properties[] = { { } }; +static const struct software_node mistral_at24_node = { + .properties = mistral_at24_properties, +}; + static struct i2c_board_info __initdata mistral_i2c_board_info[] = { { /* NOTE: powered from LCD supply */ I2C_BOARD_INFO("24c04", 0x50), - .properties = mistral_at24_properties, + .swnode = &mistral_at24_node, }, /* TODO when driver support is ready: * - optionally ov9640 camera sensor at 0x30 diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index 97fc2096b970..0411d5508d63 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -1,4 +1,4 @@ -/** +/* * OMAP1 Dual-Mode Timers - platform device registration * * Contains first level initialization routines which internally diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 4178c0ee46eb..7df8f5276ddf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -34,7 +34,6 @@ config ARCH_OMAP4 select ARM_GIC select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PL310_ERRATA_588369 if CACHE_L2X0 @@ -54,7 +53,6 @@ config SOC_OMAP5 select HAVE_ARM_SCU if SMP select HAVE_ARM_ARCH_TIMER select ARM_ERRATA_798181 if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP @@ -90,7 +88,6 @@ config SOC_DRA7XX select HAVE_ARM_ARCH_TIMER select IRQ_CROSSBAR select ARM_ERRATA_798181 if SMP - select OMAP_HWMOD select OMAP_INTERCONNECT select OMAP_INTERCONNECT_BARRIER select PM_OPP diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 9bcfb34a2206..8306ad686bc8 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -20,14 +20,14 @@ secure-common = omap-smc.o omap-secure.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) -obj-$(CONFIG_ARCH_OMAP4) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_ARCH_OMAP4) += $(secure-common) obj-$(CONFIG_SOC_AM33XX) += $(secure-common) -obj-$(CONFIG_SOC_OMAP5) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_OMAP5) += $(secure-common) obj-$(CONFIG_SOC_AM43XX) += $(secure-common) -obj-$(CONFIG_SOC_DRA7XX) += $(hwmod-common) $(secure-common) +obj-$(CONFIG_SOC_DRA7XX) += $(secure-common) ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),) -obj-y += mcbsp.o +obj-$(CONFIG_OMAP_HWMOD) += mcbsp.o endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o @@ -207,9 +207,6 @@ obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o obj-$(CONFIG_SOC_TI81XX) += omap_hwmod_81xx_data.o -obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o -obj-$(CONFIG_SOC_OMAP5) += omap_hwmod_54xx_data.o -obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 7290f033fd2d..1610c567a6a3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -33,7 +33,7 @@ static void __init __maybe_unused omap_generic_init(void) } /* Clocks are needed early, see drivers/clocksource for the rest */ -void __init __maybe_unused omap_init_time_of(void) +static void __init __maybe_unused omap_init_time_of(void) { omap_clk_init(); timer_probe(); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 49926eced5f1..db446f271f5d 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -343,15 +343,6 @@ static inline void omap5_secondary_hyp_startup(void) } #endif -#ifdef CONFIG_SOC_DRA7XX -extern int dra7xx_pciess_reset(struct omap_hwmod *oh); -#else -static inline int dra7xx_pciess_reset(struct omap_hwmod *oh) -{ - return 0; -} -#endif - struct omap_system_dma_plat_info; void pdata_quirks_init(const struct of_device_id *); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 060ba6957b7c..fba0c7aa398c 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -402,6 +402,7 @@ static int __init _omap2_init_reprogram_sdrc(void) return v; } +#ifdef CONFIG_OMAP_HWMOD static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) { return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); @@ -414,6 +415,11 @@ static void __init __maybe_unused omap_hwmod_init_postsetup(void) /* Set the default postsetup state for all hwmods */ omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state); } +#else +static inline void omap_hwmod_init_postsetup(void) +{ +} +#endif #ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) @@ -615,8 +621,6 @@ void __init omap4430_init_early(void) omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); - omap44xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_l2_cache_init(); omap_clk_soc_init = omap4xxx_dt_clk_init; omap_secure_init(); @@ -643,8 +647,6 @@ void __init omap5_init_early(void) omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); - omap54xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_clk_soc_init = omap5xxx_dt_clk_init; omap_secure_init(); } @@ -667,8 +669,6 @@ void __init dra7xx_init_early(void) dra7xxx_check_revision(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); - dra7xx_hwmod_init(); - omap_hwmod_init_postsetup(); omap_clk_soc_init = dra7xx_dt_clk_init; omap_secure_init(); } diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index f70d561f37f7..0659ab4cb0af 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -9,6 +9,7 @@ */ #include <linux/arm-smccc.h> +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/io.h> @@ -20,6 +21,7 @@ #include "common.h" #include "omap-secure.h" +#include "soc.h" static phys_addr_t omap_secure_memblock_base; @@ -213,3 +215,40 @@ void __init omap_secure_init(void) { omap_optee_init_check(); } + +/* + * Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return + * address after MMU has been re-enabled after CPU1 has been woken up again. + * Otherwise the ROM code will attempt to use the earlier physical return + * address that got set with MMU off when waking up CPU1. Only used on secure + * devices. + */ +static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v) +{ + switch (cmd) { + case CPU_CLUSTER_PM_EXIT: + omap_secure_dispatcher(OMAP4_PPA_SERVICE_0, + FLAG_START_CRITICAL, + 0, 0, 0, 0, 0); + break; + default: + break; + } + + return NOTIFY_OK; +} + +static struct notifier_block secure_notifier_block = { + .notifier_call = cpu_notifier, +}; + +static int __init secure_pm_init(void) +{ + if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx()) + return 0; + + cpu_pm_register_notifier(&secure_notifier_block); + + return 0; +} +omap_arch_initcall(secure_pm_init); diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h index 4aaa95706d39..172069f31616 100644 --- a/arch/arm/mach-omap2/omap-secure.h +++ b/arch/arm/mach-omap2/omap-secure.h @@ -50,6 +50,7 @@ #define OMAP5_DRA7_MON_SET_ACR_INDEX 0x107 /* Secure PPA(Primary Protected Application) APIs */ +#define OMAP4_PPA_SERVICE_0 0x21 #define OMAP4_PPA_L2_POR_INDEX 0x23 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX 0x25 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 2310cd56e99b..65934b2924fb 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2137,6 +2137,7 @@ static int of_dev_hwmod_lookup(struct device_node *np, if (res == 0) { *found = fc; *index = i; + of_node_put(np0); return 0; } } @@ -3495,10 +3496,6 @@ static const struct omap_hwmod_reset omap24xx_reset_quirks[] = { { .match = "msdi", .len = 4, .reset = omap_msdi_reset, }, }; -static const struct omap_hwmod_reset dra7_reset_quirks[] = { - { .match = "pcie", .len = 4, .reset = dra7xx_pciess_reset, }, -}; - static const struct omap_hwmod_reset omap_reset_quirks[] = { { .match = "dss_core", .len = 8, .reset = omap_dss_reset, }, { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, }, @@ -3534,10 +3531,6 @@ omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh, omap24xx_reset_quirks, ARRAY_SIZE(omap24xx_reset_quirks)); - if (soc_is_dra7xx()) - omap_hwmod_init_reset_quirk(dev, oh, data, dra7_reset_quirks, - ARRAY_SIZE(dra7_reset_quirks)); - omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks, ARRAY_SIZE(omap_reset_quirks)); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index eebf2fdf434c..6962a8d267e7 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -607,6 +607,8 @@ struct omap_hwmod { struct omap_hwmod *parent_hwmod; }; +#ifdef CONFIG_OMAP_HWMOD + struct device_node; struct omap_hwmod *omap_hwmod_lookup(const char *name); @@ -656,6 +658,17 @@ extern void __init omap_hwmod_init(void); const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh); +#else /* CONFIG_OMAP_HWMOD */ + +static inline int +omap_hwmod_for_each_by_class(const char *classname, + int (*fn)(struct omap_hwmod *oh, void *user), + void *user) +{ + return 0; +} +#endif /* CONFIG_OMAP_HWMOD */ + /* * */ @@ -671,7 +684,6 @@ extern int omap2420_hwmod_init(void); extern int omap2430_hwmod_init(void); extern int omap3xxx_hwmod_init(void); extern int omap44xx_hwmod_init(void); -extern int omap54xx_hwmod_init(void); extern int am33xx_hwmod_init(void); extern int dm814x_hwmod_init(void); extern int dm816x_hwmod_init(void); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c deleted file mode 100644 index 6aa3b8e81a0c..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ /dev/null @@ -1,877 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the OMAP44xx chips - * - * Copyright (C) 2009-2012 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * Note that this file is currently not in sync with autogeneration scripts. - * The above note to be removed, once it is synced up. - */ - -#include <linux/io.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" -#include "prm44xx.h" -#include "prm-regbits-44xx.h" - -/* Base offset for all OMAP4 interrupts external to MPUSS */ -#define OMAP44XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class omap44xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod omap44xx_dmm_hwmod = { - .name = "dmm", - .class = &omap44xx_dmm_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 - */ -static struct omap_hwmod_class omap44xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod omap44xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod omap44xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod omap44xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_3 */ -static struct omap_hwmod omap44xx_l3_main_3_hwmod = { - .name = "l3_main_3", - .class = &omap44xx_l3_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup - */ -static struct omap_hwmod_class omap44xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod omap44xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per */ -static struct omap_hwmod omap44xx_l4_per_hwmod = { - .name = "l4_per", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod omap44xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &omap44xx_l4_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mpu_bus' class - * instance(s): mpu_private - */ -static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { - .name = "mpu_bus", -}; - -/* mpu_private */ -static struct omap_hwmod omap44xx_mpu_private_hwmod = { - .name = "mpu_private", - .class = &omap44xx_mpu_bus_hwmod_class, - .clkdm_name = "mpuss_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'ocp_wp_noc' class - * instance(s): ocp_wp_noc - */ -static struct omap_hwmod_class omap44xx_ocp_wp_noc_hwmod_class = { - .name = "ocp_wp_noc", -}; - -/* ocp_wp_noc */ -static struct omap_hwmod omap44xx_ocp_wp_noc_hwmod = { - .name = "ocp_wp_noc", - .class = &omap44xx_ocp_wp_noc_hwmod_class, - .clkdm_name = "l3_instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3INSTR_OCP_WP1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * Modules omap_hwmod structures - * - * The following IPs are excluded for the moment because: - * - They do not need an explicit SW control using omap_hwmod API. - * - They still need to be validated with the driver - * properly adapted to omap_hwmod / omap_device - * - * usim - */ - -/* - * 'ctrl_module' class - * attila core control module + core pad control module + wkup pad control - * module + attila wkup control module - */ - -static struct omap_hwmod_class_sysconfig omap44xx_ctrl_module_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_ctrl_module_hwmod_class = { - .name = "ctrl_module", - .sysc = &omap44xx_ctrl_module_sysc, -}; - -/* ctrl_module_core */ -static struct omap_hwmod omap44xx_ctrl_module_core_hwmod = { - .name = "ctrl_module_core", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_pad_core */ -static struct omap_hwmod omap44xx_ctrl_module_pad_core_hwmod = { - .name = "ctrl_module_pad_core", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_cfg_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_wkup */ -static struct omap_hwmod omap44xx_ctrl_module_wkup_hwmod = { - .name = "ctrl_module_wkup", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* ctrl_module_pad_wkup */ -static struct omap_hwmod omap44xx_ctrl_module_pad_wkup_hwmod = { - .name = "ctrl_module_pad_wkup", - .class = &omap44xx_ctrl_module_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'debugss' class - * debug and emulation sub system - */ - -static struct omap_hwmod_class omap44xx_debugss_hwmod_class = { - .name = "debugss", -}; - -/* debugss */ -static struct omap_hwmod omap44xx_debugss_hwmod = { - .name = "debugss", - .class = &omap44xx_debugss_hwmod_class, - .clkdm_name = "emu_sys_clkdm", - .main_clk = "trace_clk_div_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'emif' class - * external memory interface no1 - */ - -static struct omap_hwmod_class_sysconfig omap44xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class omap44xx_emif_hwmod_class = { - .name = "emif", - .sysc = &omap44xx_emif_sysc, -}; - -/* emif1 */ -static struct omap_hwmod omap44xx_emif1_hwmod = { - .name = "emif1", - .class = &omap44xx_emif_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "ddrphy_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_1_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_EMIF_1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* emif2 */ -static struct omap_hwmod omap44xx_emif2_hwmod = { - .name = "emif2", - .class = &omap44xx_emif_hwmod_class, - .clkdm_name = "l3_emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "ddrphy_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MEMIF_EMIF_2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'iss' class - * external images sensor pixel data processor - */ - -static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - /* - * ISS needs 100 OCP clk cycles delay after a softreset before - * accessing sysconfig again. - * The lowest frequency at the moment for L3 bus is 100 MHz, so - * 1usec delay is needed. Add an x2 margin to be safe (2 usecs). - * - * TODO: Indicate errata when available. - */ - .srst_udelay = 2, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS | - SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap44xx_iss_hwmod_class = { - .name = "iss", - .sysc = &omap44xx_iss_sysc, -}; - -/* iss */ -static struct omap_hwmod_opt_clk iss_opt_clks[] = { - { .role = "ctrlclk", .clk = "iss_ctrlclk" }, -}; - -static struct omap_hwmod omap44xx_iss_hwmod = { - .name = "iss", - .class = &omap44xx_iss_hwmod_class, - .clkdm_name = "iss_clkdm", - .main_clk = "ducati_clk_mux_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, - .opt_clks = iss_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(iss_opt_clks), -}; - -/* - * 'mpu' class - * mpu sub-system - */ - -static struct omap_hwmod_class omap44xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod omap44xx_mpu_hwmod = { - .name = "mpu", - .class = &omap44xx_mpu_hwmod_class, - .clkdm_name = "mpuss_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'ocmc_ram' class - * top-level core on-chip ram - */ - -static struct omap_hwmod_class omap44xx_ocmc_ram_hwmod_class = { - .name = "ocmc_ram", -}; - -/* ocmc_ram */ -static struct omap_hwmod omap44xx_ocmc_ram_hwmod = { - .name = "ocmc_ram", - .class = &omap44xx_ocmc_ram_hwmod_class, - .clkdm_name = "l3_2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_L3_2_OCMC_RAM_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_L3_2_OCMC_RAM_CONTEXT_OFFSET, - }, - }, -}; - - -/* - * 'prcm' class - * power and reset manager (part of the prcm infrastructure) + clock manager 2 - * + clock manager 1 (in always on power domain) + local prm in mpu - */ - -static struct omap_hwmod_class omap44xx_prcm_hwmod_class = { - .name = "prcm", -}; - -/* prcm_mpu */ -static struct omap_hwmod omap44xx_prcm_mpu_hwmod = { - .name = "prcm_mpu", - .class = &omap44xx_prcm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* cm_core_aon */ -static struct omap_hwmod omap44xx_cm_core_aon_hwmod = { - .name = "cm_core_aon", - .class = &omap44xx_prcm_hwmod_class, - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* cm_core */ -static struct omap_hwmod omap44xx_cm_core_hwmod = { - .name = "cm_core", - .class = &omap44xx_prcm_hwmod_class, - .flags = HWMOD_NO_IDLEST, - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* prm */ -static struct omap_hwmod_rst_info omap44xx_prm_resets[] = { - { .name = "rst_global_warm_sw", .rst_shift = 0 }, - { .name = "rst_global_cold_sw", .rst_shift = 1 }, -}; - -static struct omap_hwmod omap44xx_prm_hwmod = { - .name = "prm", - .class = &omap44xx_prcm_hwmod_class, - .rst_lines = omap44xx_prm_resets, - .rst_lines_cnt = ARRAY_SIZE(omap44xx_prm_resets), -}; - -/* - * 'scrm' class - * system clock and reset manager - */ - -static struct omap_hwmod_class omap44xx_scrm_hwmod_class = { - .name = "scrm", -}; - -/* scrm */ -static struct omap_hwmod omap44xx_scrm_hwmod = { - .name = "scrm", - .class = &omap44xx_scrm_hwmod_class, - .clkdm_name = "l4_wkup_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'sl2if' class - * shared level 2 memory interface - */ - -static struct omap_hwmod_class omap44xx_sl2if_hwmod_class = { - .name = "sl2if", -}; - -/* sl2if */ -static struct omap_hwmod omap44xx_sl2if_hwmod = { - .name = "sl2if", - .class = &omap44xx_sl2if_hwmod_class, - .clkdm_name = "ivahd_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP4_CM_IVAHD_SL2_CLKCTRL_OFFSET, - .context_offs = OMAP4_RM_IVAHD_SL2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_SDMA, -}; - -/* mpu -> dmm */ -static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_dmm_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_3 -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_3__l3_instr = { - .master = &omap44xx_l3_main_3_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* ocp_wp_noc -> l3_instr */ -static struct omap_hwmod_ocp_if omap44xx_ocp_wp_noc__l3_instr = { - .master = &omap44xx_ocp_wp_noc_hwmod, - .slave = &omap44xx_l3_instr_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_1 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_1 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_l3_main_1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* debugss -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = { - .master = &omap44xx_debugss_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "dbgclk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* iss -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_iss__l3_main_2 = { - .master = &omap44xx_iss_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_2_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l3_main_3 = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l3_main_3_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { - .master = &omap44xx_l3_main_1_hwmod, - .slave = &omap44xx_l4_cfg_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l4_per */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_l4_per_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l4_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_l4_wkup_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> mpu_private */ -static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_mpu_private_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ocp_wp_noc */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ocp_wp_noc = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ocp_wp_noc_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ctrl_module_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ctrl_module_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> ctrl_module_pad_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__ctrl_module_pad_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_ctrl_module_pad_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_wkup = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_ctrl_module_wkup_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_pad_wkup */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__ctrl_module_pad_wkup = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_ctrl_module_pad_wkup_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_instr -> debugss */ -static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = { - .master = &omap44xx_l3_instr_hwmod, - .slave = &omap44xx_debugss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> iss */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_iss_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> ocmc_ram */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__ocmc_ram = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_ocmc_ram_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu_private -> prcm_mpu */ -static struct omap_hwmod_ocp_if omap44xx_mpu_private__prcm_mpu = { - .master = &omap44xx_mpu_private_hwmod, - .slave = &omap44xx_prcm_mpu_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> cm_core_aon */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__cm_core_aon = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_cm_core_aon_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> cm_core */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__cm_core = { - .master = &omap44xx_l4_cfg_hwmod, - .slave = &omap44xx_cm_core_hwmod, - .clk = "l4_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> prm */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__prm = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_prm_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> scrm */ -static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { - .master = &omap44xx_l4_wkup_hwmod, - .slave = &omap44xx_scrm_hwmod, - .clk = "l4_wkup_clk_mux_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { - .master = &omap44xx_l3_main_2_hwmod, - .slave = &omap44xx_sl2if_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif1 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_emif1_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif2 */ -static struct omap_hwmod_ocp_if omap44xx_mpu__emif2 = { - .master = &omap44xx_mpu_hwmod, - .slave = &omap44xx_emif2_hwmod, - .clk = "l3_div_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { - &omap44xx_l3_main_1__dmm, - &omap44xx_mpu__dmm, - &omap44xx_l3_main_3__l3_instr, - &omap44xx_ocp_wp_noc__l3_instr, - &omap44xx_l3_main_2__l3_main_1, - &omap44xx_l4_cfg__l3_main_1, - &omap44xx_mpu__l3_main_1, - &omap44xx_debugss__l3_main_2, - &omap44xx_iss__l3_main_2, - &omap44xx_l3_main_1__l3_main_2, - &omap44xx_l4_cfg__l3_main_2, - &omap44xx_l3_main_1__l3_main_3, - &omap44xx_l3_main_2__l3_main_3, - &omap44xx_l4_cfg__l3_main_3, - &omap44xx_l3_main_1__l4_cfg, - &omap44xx_l3_main_2__l4_per, - &omap44xx_l4_cfg__l4_wkup, - &omap44xx_mpu__mpu_private, - &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_cfg__ctrl_module_core, - &omap44xx_l4_cfg__ctrl_module_pad_core, - &omap44xx_l4_wkup__ctrl_module_wkup, - &omap44xx_l4_wkup__ctrl_module_pad_wkup, - &omap44xx_l3_instr__debugss, - &omap44xx_l3_main_2__iss, - &omap44xx_l3_main_2__ocmc_ram, - &omap44xx_mpu_private__prcm_mpu, - &omap44xx_l4_wkup__cm_core_aon, - &omap44xx_l4_cfg__cm_core, - &omap44xx_l4_wkup__prm, - &omap44xx_l4_wkup__scrm, - /* &omap44xx_l3_main_2__sl2if, */ - &omap44xx_mpu__emif1, - &omap44xx_mpu__emif2, - NULL, -}; - -int __init omap44xx_hwmod_init(void) -{ - omap_hwmod_init(); - return omap_hwmod_register_links(omap44xx_hwmod_ocp_ifs); -} - diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c deleted file mode 100644 index 85b9ab4756ed..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ /dev/null @@ -1,467 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the OMAP54xx chips - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - */ - -#include <linux/io.h> -#include <linux/power/smartreflex.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_54xx.h" -#include "cm2_54xx.h" -#include "prm54xx.h" - -/* Base offset for all OMAP5 interrupts external to MPUSS */ -#define OMAP54XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class omap54xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod omap54xx_dmm_hwmod = { - .name = "dmm", - .class = &omap54xx_dmm_hwmod_class, - .clkdm_name = "emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_DMM_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2, l3_main_3 - */ -static struct omap_hwmod_class omap54xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod omap54xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod omap54xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod omap54xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3main2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3MAIN2_L3_MAIN_2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3MAIN2_L3_MAIN_2_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_3 */ -static struct omap_hwmod omap54xx_l3_main_3_hwmod = { - .name = "l3_main_3", - .class = &omap54xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INSTR_L3_MAIN_3_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INSTR_L3_MAIN_3_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_abe, l4_cfg, l4_per, l4_wkup - */ -static struct omap_hwmod_class omap54xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod omap54xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per */ -static struct omap_hwmod omap54xx_l4_per_hwmod = { - .name = "l4_per", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "l4per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L4PER_L4_PER_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L4PER_L4_PER_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod omap54xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &omap54xx_l4_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'mpu_bus' class - * instance(s): mpu_private - */ -static struct omap_hwmod_class omap54xx_mpu_bus_hwmod_class = { - .name = "mpu_bus", -}; - -/* mpu_private */ -static struct omap_hwmod omap54xx_mpu_private_hwmod = { - .name = "mpu_private", - .class = &omap54xx_mpu_bus_hwmod_class, - .clkdm_name = "mpu_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'emif' class - * external memory interface no1 (wrapper) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class omap54xx_emif_hwmod_class = { - .name = "emif", - .sysc = &omap54xx_emif_sysc, -}; - -/* emif1 */ -static struct omap_hwmod omap54xx_emif1_hwmod = { - .name = "emif1", - .class = &omap54xx_emif_hwmod_class, - .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_core_h11x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF1_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_EMIF1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* emif2 */ -static struct omap_hwmod omap54xx_emif2_hwmod = { - .name = "emif2", - .class = &omap54xx_emif_hwmod_class, - .clkdm_name = "emif_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_core_h11x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_EMIF_EMIF2_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_EMIF_EMIF2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - - - - -/* - * 'mpu' class - * mpu sub-system - */ - -static struct omap_hwmod_class omap54xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod omap54xx_mpu_hwmod = { - .name = "mpu", - .class = &omap54xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'sata' class - * sata: serial ata interface gen2 compliant ( 1 rx/ 1 tx) - */ - -static struct omap_hwmod_class_sysconfig omap54xx_sata_sysc = { - .rev_offs = 0x00fc, - .sysc_offs = 0x0000, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class omap54xx_sata_hwmod_class = { - .name = "sata", - .sysc = &omap54xx_sata_sysc, -}; - -/* sata */ -static struct omap_hwmod omap54xx_sata_hwmod = { - .name = "sata", - .class = &omap54xx_sata_hwmod_class, - .clkdm_name = "l3init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "func_48m_fclk", - .mpu_rt_idx = 1, - .prcm = { - .omap4 = { - .clkctrl_offs = OMAP54XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, - .context_offs = OMAP54XX_RM_L3INIT_SATA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* l4_cfg -> sata */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__sata = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_sata_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* - * Interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__dmm = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_dmm_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_SDMA, -}; - -/* l3_main_3 -> l3_instr */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_3__l3_instr = { - .master = &omap54xx_l3_main_3_hwmod, - .slave = &omap54xx_l3_instr_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_1 = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_1 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__l3_main_1 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_2 = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_2 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l3_main_3 = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_2 -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l3_main_3 = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_3 */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__l3_main_3 = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_l3_main_3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_cfg = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_cfg_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_2 -> l4_per */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_2__l4_per = { - .master = &omap54xx_l3_main_2_hwmod, - .slave = &omap54xx_l4_per_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_wkup */ -static struct omap_hwmod_ocp_if omap54xx_l3_main_1__l4_wkup = { - .master = &omap54xx_l3_main_1_hwmod, - .slave = &omap54xx_l4_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> mpu_private */ -static struct omap_hwmod_ocp_if omap54xx_mpu__mpu_private = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_mpu_private_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif1 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_emif1_hwmod, - .clk = "dpll_core_h11x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> emif2 */ -static struct omap_hwmod_ocp_if omap54xx_mpu__emif2 = { - .master = &omap54xx_mpu_hwmod, - .slave = &omap54xx_emif2_hwmod, - .clk = "dpll_core_h11x2_ck", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mpu */ -static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = { - .master = &omap54xx_l4_cfg_hwmod, - .slave = &omap54xx_mpu_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { - &omap54xx_l3_main_1__dmm, - &omap54xx_l3_main_3__l3_instr, - &omap54xx_l3_main_2__l3_main_1, - &omap54xx_l4_cfg__l3_main_1, - &omap54xx_mpu__l3_main_1, - &omap54xx_l3_main_1__l3_main_2, - &omap54xx_l4_cfg__l3_main_2, - &omap54xx_l3_main_1__l3_main_3, - &omap54xx_l3_main_2__l3_main_3, - &omap54xx_l4_cfg__l3_main_3, - &omap54xx_l3_main_1__l4_cfg, - &omap54xx_l3_main_2__l4_per, - &omap54xx_l3_main_1__l4_wkup, - &omap54xx_mpu__mpu_private, - &omap54xx_mpu__emif1, - &omap54xx_mpu__emif2, - &omap54xx_l4_cfg__mpu, - &omap54xx_l4_cfg__sata, - NULL, -}; - -int __init omap54xx_hwmod_init(void) -{ - omap_hwmod_init(); - return omap_hwmod_register_links(omap54xx_hwmod_ocp_ifs); -} diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c deleted file mode 100644 index 48c2a808bd46..000000000000 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ /dev/null @@ -1,719 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Hardware modules present on the DRA7xx chips - * - * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com - * - * Paul Walmsley - * Benoit Cousson - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - */ - -#include <linux/io.h> - -#include "omap_hwmod.h" -#include "omap_hwmod_common_data.h" -#include "cm1_7xx.h" -#include "cm2_7xx.h" -#include "prm7xx.h" -#include "soc.h" - -/* Base offset for all DRA7XX interrupts external to MPUSS */ -#define DRA7XX_IRQ_GIC_START 32 - -/* - * IP blocks - */ - -/* - * 'dmm' class - * instance(s): dmm - */ -static struct omap_hwmod_class dra7xx_dmm_hwmod_class = { - .name = "dmm", -}; - -/* dmm */ -static struct omap_hwmod dra7xx_dmm_hwmod = { - .name = "dmm", - .class = &dra7xx_dmm_hwmod_class, - .clkdm_name = "emif_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'l3' class - * instance(s): l3_instr, l3_main_1, l3_main_2 - */ -static struct omap_hwmod_class dra7xx_l3_hwmod_class = { - .name = "l3", -}; - -/* l3_instr */ -static struct omap_hwmod dra7xx_l3_instr_hwmod = { - .name = "l3_instr", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* l3_main_1 */ -static struct omap_hwmod dra7xx_l3_main_1_hwmod = { - .name = "l3_main_1", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_L3_MAIN_1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_L3_MAIN_1_CONTEXT_OFFSET, - }, - }, -}; - -/* l3_main_2 */ -static struct omap_hwmod dra7xx_l3_main_2_hwmod = { - .name = "l3_main_2", - .class = &dra7xx_l3_hwmod_class, - .clkdm_name = "l3instr_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INSTR_L3_MAIN_2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INSTR_L3_MAIN_2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_HWCTRL, - }, - }, -}; - -/* - * 'l4' class - * instance(s): l4_cfg, l4_per1, l4_per2, l4_per3, l4_wkup - */ -static struct omap_hwmod_class dra7xx_l4_hwmod_class = { - .name = "l4", -}; - -/* l4_cfg */ -static struct omap_hwmod dra7xx_l4_cfg_hwmod = { - .name = "l4_cfg", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4cfg_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, - }, - }, -}; - -/* l4_per1 */ -static struct omap_hwmod dra7xx_l4_per1_hwmod = { - .name = "l4_per1", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER_L4_PER1_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_per2 */ -static struct omap_hwmod dra7xx_l4_per2_hwmod = { - .name = "l4_per2", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_L4_PER2_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_per3 */ -static struct omap_hwmod dra7xx_l4_per3_hwmod = { - .name = "l4_per3", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "l4per3_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER3_L4_PER3_CLKCTRL_OFFSET, - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* l4_wkup */ -static struct omap_hwmod dra7xx_l4_wkup_hwmod = { - .name = "l4_wkup", - .class = &dra7xx_l4_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_WKUPAON_L4_WKUP_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_WKUPAON_L4_WKUP_CONTEXT_OFFSET, - }, - }, -}; - -/* - * 'atl' class - * - */ - -static struct omap_hwmod_class dra7xx_atl_hwmod_class = { - .name = "atl", -}; - -/* atl */ -static struct omap_hwmod dra7xx_atl_hwmod = { - .name = "atl", - .class = &dra7xx_atl_hwmod_class, - .clkdm_name = "atl_clkdm", - .main_clk = "atl_gfclk_mux", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_ATL_ATL_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_ATL_ATL_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'bb2d' class - * - */ - -static struct omap_hwmod_class dra7xx_bb2d_hwmod_class = { - .name = "bb2d", -}; - -/* bb2d */ -static struct omap_hwmod dra7xx_bb2d_hwmod = { - .name = "bb2d", - .class = &dra7xx_bb2d_hwmod_class, - .clkdm_name = "dss_clkdm", - .main_clk = "dpll_core_h24x2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_DSS_BB2D_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_DSS_BB2D_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'ctrl_module' class - * - */ - -static struct omap_hwmod_class dra7xx_ctrl_module_hwmod_class = { - .name = "ctrl_module", -}; - -/* ctrl_module_wkup */ -static struct omap_hwmod dra7xx_ctrl_module_wkup_hwmod = { - .name = "ctrl_module_wkup", - .class = &dra7xx_ctrl_module_hwmod_class, - .clkdm_name = "wkupaon_clkdm", - .prcm = { - .omap4 = { - .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, - }, - }, -}; - -/* - * 'mpu' class - * - */ - -static struct omap_hwmod_class dra7xx_mpu_hwmod_class = { - .name = "mpu", -}; - -/* mpu */ -static struct omap_hwmod dra7xx_mpu_hwmod = { - .name = "mpu", - .class = &dra7xx_mpu_hwmod_class, - .clkdm_name = "mpu_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, - .main_clk = "dpll_mpu_m2_ck", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_MPU_MPU_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_MPU_MPU_CONTEXT_OFFSET, - }, - }, -}; - - -/* - * 'PCIE' class - * - */ - -/* - * As noted in documentation for _reset() in omap_hwmod.c, the stock reset - * functionality of OMAP HWMOD layer does not deassert the hardreset lines - * associated with an IP automatically leaving the driver to handle that - * by itself. This does not work for PCIeSS which needs the reset lines - * deasserted for the driver to start accessing registers. - * - * We use a PCIeSS HWMOD class specific reset handler to deassert the hardreset - * lines after asserting them. - */ -int dra7xx_pciess_reset(struct omap_hwmod *oh) -{ - int i; - - for (i = 0; i < oh->rst_lines_cnt; i++) { - omap_hwmod_assert_hardreset(oh, oh->rst_lines[i].name); - omap_hwmod_deassert_hardreset(oh, oh->rst_lines[i].name); - } - - return 0; -} - -static struct omap_hwmod_class dra7xx_pciess_hwmod_class = { - .name = "pcie", - .reset = dra7xx_pciess_reset, -}; - -/* pcie1 */ -static struct omap_hwmod_rst_info dra7xx_pciess1_resets[] = { - { .name = "pcie", .rst_shift = 0 }, -}; - -static struct omap_hwmod dra7xx_pciess1_hwmod = { - .name = "pcie1", - .class = &dra7xx_pciess_hwmod_class, - .clkdm_name = "pcie_clkdm", - .rst_lines = dra7xx_pciess1_resets, - .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess1_resets), - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS1_CLKCTRL_OFFSET, - .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_PCIESS1_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* pcie2 */ -static struct omap_hwmod_rst_info dra7xx_pciess2_resets[] = { - { .name = "pcie", .rst_shift = 1 }, -}; - -/* pcie2 */ -static struct omap_hwmod dra7xx_pciess2_hwmod = { - .name = "pcie2", - .class = &dra7xx_pciess_hwmod_class, - .clkdm_name = "pcie_clkdm", - .rst_lines = dra7xx_pciess2_resets, - .rst_lines_cnt = ARRAY_SIZE(dra7xx_pciess2_resets), - .main_clk = "l4_root_clk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_PCIESS2_CLKCTRL_OFFSET, - .rstctrl_offs = DRA7XX_RM_L3INIT_PCIESS_RSTCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_PCIESS2_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'qspi' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_qspi_sysc = { - .rev_offs = 0, - .sysc_offs = 0x0010, - .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_qspi_hwmod_class = { - .name = "qspi", - .sysc = &dra7xx_qspi_sysc, -}; - -/* qspi */ -static struct omap_hwmod dra7xx_qspi_hwmod = { - .name = "qspi", - .class = &dra7xx_qspi_hwmod_class, - .clkdm_name = "l4per2_clkdm", - .main_clk = "qspi_gfclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L4PER2_QSPI_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L4PER2_QSPI_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'sata' class - * - */ - -static struct omap_hwmod_class_sysconfig dra7xx_sata_sysc = { - .rev_offs = 0x00fc, - .sysc_offs = 0x0000, - .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART | MSTANDBY_SMART_WKUP), - .sysc_fields = &omap_hwmod_sysc_type2, -}; - -static struct omap_hwmod_class dra7xx_sata_hwmod_class = { - .name = "sata", - .sysc = &dra7xx_sata_sysc, -}; - -/* sata */ - -static struct omap_hwmod dra7xx_sata_hwmod = { - .name = "sata", - .class = &dra7xx_sata_hwmod_class, - .clkdm_name = "l3init_clkdm", - .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, - .main_clk = "func_48m_fclk", - .mpu_rt_idx = 1, - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3INIT_SATA_CONTEXT_OFFSET, - .modulemode = MODULEMODE_SWCTRL, - }, - }, -}; - -/* - * 'vcp' class - * - */ - -static struct omap_hwmod_class dra7xx_vcp_hwmod_class = { - .name = "vcp", -}; - -/* vcp1 */ -static struct omap_hwmod dra7xx_vcp1_hwmod = { - .name = "vcp1", - .class = &dra7xx_vcp_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP1_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_VCP1_CONTEXT_OFFSET, - }, - }, -}; - -/* vcp2 */ -static struct omap_hwmod dra7xx_vcp2_hwmod = { - .name = "vcp2", - .class = &dra7xx_vcp_hwmod_class, - .clkdm_name = "l3main1_clkdm", - .main_clk = "l3_iclk_div", - .prcm = { - .omap4 = { - .clkctrl_offs = DRA7XX_CM_L3MAIN1_VCP2_CLKCTRL_OFFSET, - .context_offs = DRA7XX_RM_L3MAIN1_VCP2_CONTEXT_OFFSET, - }, - }, -}; - - - -/* - * Interfaces - */ - -/* l3_main_1 -> dmm */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_dmm_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_SDMA, -}; - -/* l3_main_2 -> l3_instr */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = { - .master = &dra7xx_l3_main_2_hwmod, - .slave = &dra7xx_l3_instr_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> l3_main_1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* mpu -> l3_main_1 */ -static struct omap_hwmod_ocp_if dra7xx_mpu__l3_main_1 = { - .master = &dra7xx_mpu_hwmod, - .slave = &dra7xx_l3_main_1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l3_main_1 -> l3_main_2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l3_main_2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU, -}; - -/* l4_cfg -> l3_main_2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__l3_main_2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_l3_main_2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_cfg */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_cfg = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_cfg_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_per3 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_per3 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_per3_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> l4_wkup */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__l4_wkup = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_l4_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> atl */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__atl = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_atl_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> bb2d */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__bb2d = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_bb2d_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_wkup -> ctrl_module_wkup */ -static struct omap_hwmod_ocp_if dra7xx_l4_wkup__ctrl_module_wkup = { - .master = &dra7xx_l4_wkup_hwmod, - .slave = &dra7xx_ctrl_module_wkup_hwmod, - .clk = "wkupaon_iclk_mux", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> mpu */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_mpu_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> pciess1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pciess1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pciess1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess1 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pciess1_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> pciess2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__pciess2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_pciess2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> pciess2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_pciess2_hwmod, - .clk = "l4_root_clk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> qspi */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_qspi_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_cfg -> sata */ -static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = { - .master = &dra7xx_l4_cfg_hwmod, - .slave = &dra7xx_sata_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> vcp1 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_vcp1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> vcp1 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp1 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_vcp1_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l3_main_1 -> vcp2 */ -static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp2 = { - .master = &dra7xx_l3_main_1_hwmod, - .slave = &dra7xx_vcp2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -/* l4_per2 -> vcp2 */ -static struct omap_hwmod_ocp_if dra7xx_l4_per2__vcp2 = { - .master = &dra7xx_l4_per2_hwmod, - .slave = &dra7xx_vcp2_hwmod, - .clk = "l3_iclk_div", - .user = OCP_USER_MPU | OCP_USER_SDMA, -}; - -static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { - &dra7xx_l3_main_1__dmm, - &dra7xx_l3_main_2__l3_instr, - &dra7xx_l4_cfg__l3_main_1, - &dra7xx_mpu__l3_main_1, - &dra7xx_l3_main_1__l3_main_2, - &dra7xx_l4_cfg__l3_main_2, - &dra7xx_l3_main_1__l4_cfg, - &dra7xx_l3_main_1__l4_per1, - &dra7xx_l3_main_1__l4_per2, - &dra7xx_l3_main_1__l4_per3, - &dra7xx_l3_main_1__l4_wkup, - &dra7xx_l4_per2__atl, - &dra7xx_l3_main_1__bb2d, - &dra7xx_l4_wkup__ctrl_module_wkup, - &dra7xx_l4_cfg__mpu, - &dra7xx_l3_main_1__pciess1, - &dra7xx_l4_cfg__pciess1, - &dra7xx_l3_main_1__pciess2, - &dra7xx_l4_cfg__pciess2, - &dra7xx_l3_main_1__qspi, - &dra7xx_l4_cfg__sata, - &dra7xx_l3_main_1__vcp1, - &dra7xx_l4_per2__vcp1, - &dra7xx_l3_main_1__vcp2, - &dra7xx_l4_per2__vcp2, - NULL, -}; - -/* SoC variant specific hwmod links */ -static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = { - NULL, -}; - -static struct omap_hwmod_ocp_if *rtc_hwmod_ocp_ifs[] __initdata = { - NULL, -}; - -int __init dra7xx_hwmod_init(void) -{ - int ret; - - omap_hwmod_init(); - ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs); - - if (!ret && soc_is_dra74x()) { - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } else if (!ret && soc_is_dra72x()) { - ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs); - if (!ret && !of_machine_is_compatible("ti,dra718")) - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } else if (!ret && soc_is_dra76x()) { - if (!ret && soc_is_dra76x_abz()) - ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs); - } - - return ret; -} diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index a642d3b39e50..d4dab041324d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * OMAP and TWL PMIC specific initializations. * * Copyright (C) 2010 Texas Instruments Incorporated. diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 2e3a10914c40..765809b214e7 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -443,7 +443,7 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } -#if IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) +#if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) { @@ -569,10 +569,29 @@ static void pdata_quirks_check(struct pdata_init *quirks) } } -void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +static const char * const pdata_quirks_init_nodes[] = { + "prcm", + "prm", +}; + +static void __init +pdata_quirks_init_clocks(const struct of_device_id *omap_dt_match_table) { struct device_node *np; + int i; + + for (i = 0; i < ARRAY_SIZE(pdata_quirks_init_nodes); i++) { + np = of_find_node_by_name(NULL, pdata_quirks_init_nodes[i]); + if (!np) + continue; + + of_platform_populate(np, omap_dt_match_table, + omap_auxdata_lookup, NULL); + } +} +void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) +{ /* * We still need this for omap2420 and omap3 PM to work, others are * using drivers/misc/sram.c already. @@ -585,13 +604,7 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) omap3_mcbsp_init(); pdata_quirks_check(auxdata_quirks); - /* Populate always-on PRCM in l4_wkup to probe l4_wkup */ - np = of_find_node_by_name(NULL, "prcm"); - if (!np) - np = of_find_node_by_name(NULL, "prm"); - if (np) - of_platform_populate(np, omap_dt_match_table, - omap_auxdata_lookup, NULL); + pdata_quirks_init_clocks(omap_dt_match_table); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 919d35d5b325..b43eab9879d3 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -168,8 +168,8 @@ static int pwrdm_suspend_set(void *data, u64 val) return -EINVAL; } -DEFINE_SIMPLE_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, - pwrdm_suspend_set, "%llu\n"); +DEFINE_DEBUGFS_ATTRIBUTE(pwrdm_suspend_fops, pwrdm_suspend_get, + pwrdm_suspend_set, "%llu\n"); static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir) { diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c index 09076ad0576d..668dc84fd31e 100644 --- a/arch/arm/mach-omap2/pmic-cpcap.c +++ b/arch/arm/mach-omap2/pmic-cpcap.c @@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void) omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu); if (of_machine_is_compatible("motorola,droid-bionic")) { - voltdm = voltdm_lookup("mpu"); + voltdm = voltdm_lookup("core"); omap_voltage_register_pmic(voltdm, &omap_cpcap_core); - voltdm = voltdm_lookup("mpu"); + voltdm = voltdm_lookup("iva"); omap_voltage_register_pmic(voltdm, &omap_cpcap_iva); } else { voltdm = voltdm_lookup("core"); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 1cbac76136d4..0a5b87e2a4b0 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1202,26 +1202,26 @@ bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm) if (!pwrdm) { pr_debug("powerdomain: %s: invalid powerdomain pointer\n", __func__); - return 1; + return true; } if (pwrdm->pwrsts & PWRSTS_OFF) - return 1; + return true; if (pwrdm->pwrsts & PWRSTS_RET) { if (pwrdm->pwrsts_logic_ret & PWRSTS_OFF) - return 1; + return true; for (i = 0; i < pwrdm->banks; i++) if (pwrdm->pwrsts_mem_ret[i] & PWRSTS_OFF) - return 1; + return true; } for (i = 0; i < pwrdm->banks; i++) if (pwrdm->pwrsts_mem_on[i] & PWRSTS_OFF) - return 1; + return true; - return 0; + return false; } /** diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 62df666c2bd0..db672cf19a51 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data, extern struct omap_sr_data omap_sr_pdata[]; -static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +static int __init sr_init_by_name(const char *name, const char *voltdm) { struct omap_sr_data *sr_data = NULL; struct omap_volt_data *volt_data; - struct omap_smartreflex_dev_attr *sr_dev_attr; static int i; - if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) || - !strncmp(oh->name, "smartreflex_mpu", 16)) + if (!strncmp(name, "smartreflex_mpu_iva", 20) || + !strncmp(name, "smartreflex_mpu", 16)) sr_data = &omap_sr_pdata[OMAP_SR_MPU]; - else if (!strncmp(oh->name, "smartreflex_core", 17)) + else if (!strncmp(name, "smartreflex_core", 17)) sr_data = &omap_sr_pdata[OMAP_SR_CORE]; - else if (!strncmp(oh->name, "smartreflex_iva", 16)) + else if (!strncmp(name, "smartreflex_iva", 16)) sr_data = &omap_sr_pdata[OMAP_SR_IVA]; if (!sr_data) { - pr_err("%s: Unknown instance %s\n", __func__, oh->name); + pr_err("%s: Unknown instance %s\n", __func__, name); return -EINVAL; } - sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; - if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { - pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", - __func__, oh->name); - goto exit; - } - - sr_data->name = oh->name; + sr_data->name = name; if (cpu_is_omap343x()) sr_data->ip_type = 1; else @@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) } } - sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); + sr_data->voltdm = voltdm_lookup(voltdm); if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", - __func__, sr_dev_attr->sensor_voltdm_name); + __func__, voltdm); goto exit; } @@ -160,6 +152,27 @@ exit: return 0; } +#ifdef CONFIG_OMAP_HWMOD +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + struct omap_smartreflex_dev_attr *sr_dev_attr; + + sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr; + if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) { + pr_err("%s: No voltage domain specified for %s. Cannot initialize\n", + __func__, oh->name); + return 0; + } + + return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name); +} +#else +static int __init sr_dev_init(struct omap_hwmod *oh, void *user) +{ + return -EINVAL; +} +#endif + /* * API to be called from board files to enable smartreflex * autocompensation at init. @@ -169,7 +182,42 @@ void __init omap_enable_smartreflex_on_init(void) sr_enable_on_init = true; } +static const char * const omap4_sr_instances[] = { + "mpu", + "iva", + "core", +}; + +static const char * const dra7_sr_instances[] = { + "mpu", + "core", +}; + int __init omap_devinit_smartreflex(void) { + const char * const *sr_inst = NULL; + int i, nr_sr = 0; + + if (soc_is_omap44xx()) { + sr_inst = omap4_sr_instances; + nr_sr = ARRAY_SIZE(omap4_sr_instances); + + } else if (soc_is_dra7xx()) { + sr_inst = dra7_sr_instances; + nr_sr = ARRAY_SIZE(dra7_sr_instances); + } + + if (nr_sr) { + const char *name, *voltdm; + + for (i = 0; i < nr_sr; i++) { + name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]); + voltdm = sr_inst[i]; + sr_init_by_name(name, voltdm); + } + + return 0; + } + return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL); } diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 151e26ec0696..04a12523cdee 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -74,13 +74,17 @@ static const struct property_entry mcp251x_properties[] = { {} }; +static const struct software_node mcp251x_node = { + .properties = mcp251x_properties, +}; + static struct spi_board_info mcp251x_board_info[] = { { .modalias = "mcp2515", .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 0, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info1, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1) }, @@ -89,7 +93,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 3, .chip_select = 1, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info2, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2) }, @@ -98,7 +102,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 0, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info3, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3) }, @@ -107,7 +111,7 @@ static struct spi_board_info mcp251x_board_info[] = { .max_speed_hz = 6500000, .bus_num = 4, .chip_select = 1, - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .controller_data = &mcp251x_chip_info4, .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4) } diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d1010ec26e9f..d237bd030238 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -502,16 +502,20 @@ static inline void mainstone_init_keypad(void) {} #endif static int mst_pcmcia0_irqs[11] = { - [0 ... 10] = -1, + [0 ... 4] = -1, [5] = MAINSTONE_S0_CD_IRQ, + [6 ... 7] = -1, [8] = MAINSTONE_S0_STSCHG_IRQ, + [9] = -1, [10] = MAINSTONE_S0_IRQ, }; static int mst_pcmcia1_irqs[11] = { - [0 ... 10] = -1, + [0 ... 4] = -1, [5] = MAINSTONE_S1_CD_IRQ, + [6 ... 7] = -1, [8] = MAINSTONE_S1_STSCHG_IRQ, + [9] = -1, [10] = MAINSTONE_S1_IRQ, }; diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c index 45c19ca96f7a..ec0d9b094744 100644 --- a/arch/arm/mach-pxa/pxa_cplds_irqs.c +++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c @@ -147,22 +147,20 @@ static int cplds_probe(struct platform_device *pdev) } irq_set_irq_wake(fpga->irq, 1); - fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, - CPLDS_NB_IRQ, - &cplds_irq_domain_ops, fpga); + if (base_irq) + fpga->irqdomain = irq_domain_add_legacy(pdev->dev.of_node, + CPLDS_NB_IRQ, + base_irq, 0, + &cplds_irq_domain_ops, + fpga); + else + fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node, + CPLDS_NB_IRQ, + &cplds_irq_domain_ops, + fpga); if (!fpga->irqdomain) return -ENODEV; - if (base_irq) { - ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0, - CPLDS_NB_IRQ); - if (ret) { - dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n", - base_irq, base_irq + CPLDS_NB_IRQ); - return ret; - } - } - return 0; } diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index e2353f7dcf01..7ad627465768 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -794,6 +794,10 @@ static const struct property_entry pca9500_eeprom_properties[] = { { } }; +static const struct software_node pca9500_eeprom_node = { + .properties = pca9500_eeprom_properties, +}; + /** * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state **/ @@ -929,7 +933,7 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { }, { .type = "24c02", .addr = 0x57, - .properties = pca9500_eeprom_properties, + .swnode = &pca9500_eeprom_node, }, { .type = "max1238", .addr = 0x35, diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index b27fc7ac9cea..97700429633e 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -433,10 +433,14 @@ static const struct property_entry mcp251x_properties[] = { {} }; +static const struct software_node mcp251x_node = { + .properties = mcp251x_properties, +}; + static struct spi_board_info zeus_spi_board_info[] = { [0] = { .modalias = "mcp2515", - .properties = mcp251x_properties, + .swnode = &mcp251x_node, .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), .max_speed_hz = 1*1000*1000, .bus_num = 3, diff --git a/arch/arm/mach-s3c/mach-mini2440.c b/arch/arm/mach-s3c/mach-mini2440.c index 4100905dfbd0..551ec660ab59 100644 --- a/arch/arm/mach-s3c/mach-mini2440.c +++ b/arch/arm/mach-s3c/mach-mini2440.c @@ -542,10 +542,14 @@ static const struct property_entry mini2440_at24_properties[] = { { } }; +static const struct software_node mini2440_at24_node = { + .properties = mini2440_at24_properties, +}; + static struct i2c_board_info mini2440_i2c_devs[] __initdata = { { I2C_BOARD_INFO("24c08", 0x50), - .properties = mini2440_at24_properties, + .swnode = &mini2440_at24_node, }, }; diff --git a/arch/arm/mach-s3c/mach-rx1950.c b/arch/arm/mach-s3c/mach-rx1950.c index 6e19add158a9..a3f46aa61c45 100644 --- a/arch/arm/mach-s3c/mach-rx1950.c +++ b/arch/arm/mach-s3c/mach-rx1950.c @@ -384,6 +384,8 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { static struct pwm_lookup rx1950_pwm_lookup[] = { PWM_LOOKUP("samsung-pwm", 0, "pwm-backlight.0", NULL, 48000, PWM_POLARITY_NORMAL), + PWM_LOOKUP("samsung-pwm", 1, "pwm-backlight.0", "RX1950 LCD", LCD_PWM_PERIOD, + PWM_POLARITY_NORMAL), }; static struct pwm_device *lcd_pwm; @@ -498,19 +500,18 @@ static void rx1950_bl_power(int enable) static int rx1950_backlight_init(struct device *dev) { WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight")); - lcd_pwm = pwm_request(1, "RX1950 LCD"); + lcd_pwm = pwm_get(dev, "RX1950 LCD"); if (IS_ERR(lcd_pwm)) { dev_err(dev, "Unable to request PWM for LCD power!\n"); return PTR_ERR(lcd_pwm); } /* - * This is only required to initialize .polarity; all other values are - * fixed in this driver. + * Call pwm_init_state to initialize .polarity and .period. The other + * values are fixed in this driver. */ pwm_init_state(lcd_pwm, &lcd_pwm_state); - lcd_pwm_state.period = LCD_PWM_PERIOD; lcd_pwm_state.duty_cycle = LCD_PWM_DUTY; rx1950_lcd_power(1); @@ -524,7 +525,7 @@ static void rx1950_backlight_exit(struct device *dev) rx1950_bl_power(0); rx1950_lcd_power(0); - pwm_free(lcd_pwm); + pwm_put(lcd_pwm); gpio_free(S3C2410_GPB(0)); } diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index c3bb68d57cea..43ddec677c0b 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -menuconfig ARCH_SOCFPGA +menuconfig ARCH_INTEL_SOCFPGA bool "Altera SOCFPGA family" depends on ARCH_MULTI_V7 select ARCH_SUPPORTS_BIG_ENDIAN @@ -19,7 +19,7 @@ menuconfig ARCH_SOCFPGA select PL310_ERRATA_753970 if PL310 select PL310_ERRATA_769419 -if ARCH_SOCFPGA +if ARCH_INTEL_SOCFPGA config SOCFPGA_SUSPEND bool "Suspend to RAM on SOCFPGA" help diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index 0958f68a21e2..926d5a243238 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -195,14 +195,12 @@ static struct pl022_ssp_controller spear320_ssp_data[] = { .dma_filter = pl08x_filter_id, .dma_tx_param = "ssp1_tx", .dma_rx_param = "ssp1_rx", - .num_chipselect = 2, }, { .bus_id = 2, .enable_dma = 1, .dma_filter = pl08x_filter_id, .dma_tx_param = "ssp2_tx", .dma_rx_param = "ssp2_rx", - .num_chipselect = 2, } }; diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index 8537fcffe5a8..f83321d5e353 100644 --- a/arch/arm/mach-spear/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -30,16 +30,6 @@ struct pl022_ssp_controller pl022_plat_data = { .dma_filter = pl08x_filter_id, .dma_tx_param = "ssp0_tx", .dma_rx_param = "ssp0_rx", - /* - * This is number of spi devices that can be connected to spi. There are - * two type of chipselects on which slave devices can work. One is chip - * select provided by spi masters other is controlled through external - * gpio's. We can't use chipselect provided from spi master (because as - * soon as FIFO becomes empty, CS is disabled and transfer ends). So - * this number now depends on number of gpios available for spi. each - * slave on each master requires a separate gpio pin. - */ - .num_chipselect = 2, }; /* dmac device registration */ diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c index 011d57b488c2..a766310d8dca 100644 --- a/arch/arm/mach-stm32/board-dt.c +++ b/arch/arm/mach-stm32/board-dt.c @@ -17,6 +17,7 @@ static const char *const stm32_compat[] __initconst = { "st,stm32f746", "st,stm32f769", "st,stm32h743", + "st,stm32h750", "st,stm32mp157", NULL }; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 0810f3abd810..415d8ad2a3c1 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -86,7 +86,7 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) } #ifdef CONFIG_HOTPLUG_CPU -void ux500_cpu_die(unsigned int cpu) +static void ux500_cpu_die(unsigned int cpu) { wfi(); } diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 44f7292ec27b..f1da3b439b96 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/mm.h> #include <linux/highmem.h> +#include <linux/pagemap.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 6a769a6c314e..d8a115de5507 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -8,6 +8,7 @@ #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/highmem.h> +#include <linux/pagemap.h> #include <asm/shmparam.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index eb5d338657d1..bcb485620a05 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/mm.h> #include <linux/highmem.h> +#include <linux/pagemap.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 828a2561b229..1ba9f9f9dbd8 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -301,7 +301,11 @@ static void __init free_highpages(void) void __init mem_init(void) { #ifdef CONFIG_ARM_LPAE - swiotlb_init(1); + if (swiotlb_force == SWIOTLB_FORCE || + max_pfn > arm_dma_pfn_limit) + swiotlb_init(1); + else + swiotlb_force = SWIOTLB_NO_FORCE; #endif set_max_mapnr(pfn_to_page(max_pfn) - mem_map); @@ -316,8 +320,6 @@ void __init mem_init(void) free_highpages(); - mem_init_print_info(NULL); - /* * Check boundaries twice: Some fundamental inconsistencies can * be detected at build time already. diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index a25b660c3017..c1e12aab67b8 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -387,8 +387,7 @@ void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot) pte_t *pte = pte_offset_fixmap(pmd_off_k(vaddr), vaddr); /* Make sure fixmap region does not exceed available allocation. */ - BUILD_BUG_ON(FIXADDR_START + (__end_of_fixed_addresses * PAGE_SIZE) > - FIXADDR_END); + BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) < FIXADDR_START); BUG_ON(idx >= __end_of_fixed_addresses); /* we only support device mappings until pgprot_kernel has been set */ diff --git a/arch/arm/mm/pmsa-v7.c b/arch/arm/mm/pmsa-v7.c index 88950e41a3a9..59d916ccdf25 100644 --- a/arch/arm/mm/pmsa-v7.c +++ b/arch/arm/mm/pmsa-v7.c @@ -235,6 +235,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) phys_addr_t mem_end; phys_addr_t reg_start, reg_end; unsigned int mem_max_regions; + bool first = true; int num; u64 i; @@ -263,7 +264,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) #endif for_each_mem_range(i, ®_start, ®_end) { - if (i == 0) { + if (first) { phys_addr_t phys_offset = PHYS_OFFSET; /* @@ -275,6 +276,7 @@ void __init pmsav7_adjust_lowmem_bounds(void) mem_start = reg_start; mem_end = reg_end; specified_mem_size = mem_end - mem_start; + first = false; } else { /* * memblock auto merges contiguous blocks, remove diff --git a/arch/arm/mm/pmsa-v8.c b/arch/arm/mm/pmsa-v8.c index 2de019f7503e..8359748a19a1 100644 --- a/arch/arm/mm/pmsa-v8.c +++ b/arch/arm/mm/pmsa-v8.c @@ -95,10 +95,11 @@ void __init pmsav8_adjust_lowmem_bounds(void) { phys_addr_t mem_end; phys_addr_t reg_start, reg_end; + bool first = true; u64 i; for_each_mem_range(i, ®_start, ®_end) { - if (i == 0) { + if (first) { phys_addr_t phys_offset = PHYS_OFFSET; /* @@ -107,6 +108,7 @@ void __init pmsav8_adjust_lowmem_bounds(void) if (reg_start != phys_offset) panic("First memory bank must be contiguous from PHYS_OFFSET"); mem_end = reg_end; + first = false; } else { /* * memblock auto merges contiguous blocks, remove diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 1eb59003bdec..9f11de46aaa9 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -85,7 +85,7 @@ static int dma_lch_count; static int dma_chan_count; static int omap_dma_reserve_channels; -static spinlock_t dma_chan_lock; +static DEFINE_SPINLOCK(dma_chan_lock); static struct omap_dma_lch *dma_chan; static inline void disable_lnk(int lch); @@ -902,7 +902,6 @@ static int omap_system_dma_probe(struct platform_device *pdev) if (!dma_chan) return -ENOMEM; - spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { omap_clear_dma(ch); diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c index c4b49b322e8a..f5f790c6e5f8 100644 --- a/arch/arm/probes/uprobes/core.c +++ b/arch/arm/probes/uprobes/core.c @@ -204,7 +204,7 @@ unsigned long uprobe_get_swbp_addr(struct pt_regs *regs) static struct undef_hook uprobes_arm_break_hook = { .instr_mask = 0x0fffffff, .instr_val = (UPROBE_SWBP_ARM_INSN & 0x0fffffff), - .cpsr_mask = MODE_MASK, + .cpsr_mask = (PSR_T_BIT | MODE_MASK), .cpsr_val = USR_MODE, .fn = uprobe_trap_handler, }; @@ -212,7 +212,7 @@ static struct undef_hook uprobes_arm_break_hook = { static struct undef_hook uprobes_arm_ss_hook = { .instr_mask = 0x0fffffff, .instr_val = (UPROBE_SS_ARM_INSN & 0x0fffffff), - .cpsr_mask = MODE_MASK, + .cpsr_mask = (PSR_T_BIT | MODE_MASK), .cpsr_val = USR_MODE, .fn = uprobe_trap_handler, }; diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl index dcc1191291a2..c7679d7db98b 100644 --- a/arch/arm/tools/syscall.tbl +++ b/arch/arm/tools/syscall.tbl @@ -456,3 +456,7 @@ 440 common process_madvise sys_process_madvise 441 common epoll_pwait2 sys_epoll_pwait2 442 common mount_setattr sys_mount_setattr +443 common quotactl_path sys_quotactl_path +444 common landlock_create_ruleset sys_landlock_create_ruleset +445 common landlock_add_rule sys_landlock_add_rule +446 common landlock_restrict_self sys_landlock_restrict_self diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 467fa225c3d0..f8f07469d259 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -135,12 +135,24 @@ void xen_destroy_contiguous_region(phys_addr_t pstart, unsigned int order) return; } +int xen_swiotlb_detect(void) +{ + if (!xen_domain()) + return 0; + if (xen_feature(XENFEAT_direct_mapped)) + return 1; + /* legacy case */ + if (!xen_feature(XENFEAT_not_direct_mapped) && xen_initial_domain()) + return 1; + return 0; +} + static int __init xen_mm_init(void) { struct gnttab_cache_flush cflush; - if (!xen_initial_domain()) + if (!xen_swiotlb_detect()) return 0; - xen_swiotlb_init(1, false); + xen_swiotlb_init(); cflush.op = 0; cflush.a.dev_bus_addr = 0; diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index acb464547a54..84a1cea1f43b 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -11,6 +11,7 @@ #include <xen/xen.h> #include <xen/interface/memory.h> +#include <xen/grant_table.h> #include <xen/page.h> #include <xen/swiotlb-xen.h> @@ -109,7 +110,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, map_ops[i].status = GNTST_general_error; unmap.host_addr = map_ops[i].host_addr, unmap.handle = map_ops[i].handle; - map_ops[i].handle = ~0; + map_ops[i].handle = INVALID_GRANT_HANDLE; if (map_ops[i].flags & GNTMAP_device_map) unmap.dev_bus_addr = map_ops[i].dev_bus_addr; else @@ -130,7 +131,6 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops, return 0; } -EXPORT_SYMBOL_GPL(set_foreign_p2m_mapping); int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, struct gnttab_unmap_grant_ref *kunmap_ops, @@ -145,7 +145,6 @@ int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops, return 0; } -EXPORT_SYMBOL_GPL(clear_foreign_p2m_mapping); bool __set_phys_to_machine_multi(unsigned long pfn, unsigned long mfn, unsigned long nr_pages) |