diff options
Diffstat (limited to 'arch/arm')
364 files changed, 17512 insertions, 3180 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 19b348ec65e8..30bbc3746130 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -58,7 +58,9 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ - bcm2835-rpi-b-plus.dtb + bcm2835-rpi-b-rev2.dtb \ + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ @@ -72,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -83,6 +86,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb +dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb \ @@ -115,6 +120,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ @@ -123,6 +129,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb @@ -227,6 +234,9 @@ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb +dtb-$(CONFIG_MACH_MESON8B) += \ + meson8b-mxq.dtb \ + meson8b-odroidc1.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb dtb-$(CONFIG_SOC_IMX1) += \ @@ -284,6 +294,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ @@ -313,6 +324,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ @@ -446,6 +458,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen.dtb \ am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ @@ -470,6 +483,7 @@ dtb-$(CONFIG_SOC_AM43XX) += \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += \ omap5-cm-t54.dtb \ + omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ @@ -506,7 +520,10 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-popmetal.dtb \ rk3288-r89.dtb \ + rk3288-rock2-square.dtb \ + rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ @@ -532,6 +549,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ + r8a7791-porter.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ @@ -574,7 +592,9 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet1.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ @@ -582,16 +602,23 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb + sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino2.dtb \ + sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a10s-wobo-i5.dtb \ sun5i-a13-hsg-h702.dtb \ + sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ - sun5i-a13-utoo-p66.dtb + sun5i-a13-q8-tablet.dtb \ + sun5i-a13-utoo-p66.dtb \ + sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ @@ -599,7 +626,11 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ - sun6i-a31s-cs908.dtb + sun6i-a31s-cs908.dtb \ + sun6i-a31s-primo81.dtb \ + sun6i-a31s-sina31s.dtb \ + sun6i-a31s-sinovoip-bpi-m2.dtb \ + sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ sun7i-a20-bananapro.dtb \ @@ -609,6 +640,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ + sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ @@ -616,14 +648,18 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ sun7i-a20-pcduino3-nano.dtb \ - sun7i-a20-wexler-tab7200.dtb + sun7i-a20-wexler-tab7200.dtb \ + sun7i-a20-wits-pro-a20-dkt.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ + sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ @@ -669,7 +705,9 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld8-ref.dtb \ + uniphier-proxstream2-gentil.dtb \ + uniphier-proxstream2-vodka.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb @@ -699,6 +737,10 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ armada-370-rd.dtb \ + armada-370-seagate-nas-2bay.dtb \ + armada-370-seagate-nas-4bay.dtb \ + armada-370-seagate-personal-cloud.dtb \ + armada-370-seagate-personal-cloud-2bay.dtb \ armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 72a9b3fc4251..58a05f7d0b7c 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -46,39 +46,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index fec78349c1f3..5d370d54bd30 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -383,8 +383,7 @@ bus-width = <0x4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &aes { diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 000000000000..0f65bdaaa583 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1942a5c8132d..d9d00ab863a2 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -737,7 +737,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 315bb02c9920..89442e98a837 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -647,7 +647,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &sham { diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index c0e1135256cc..54f113546ecc 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -56,41 +56,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; }; diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 5dd084f3c81c..2f43e458ea4a 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -29,8 +29,17 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; + regulators { + compatible = "simple-bus"; + + vcc5v: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; }; }; @@ -233,14 +242,14 @@ #include "tps65910.dtsi" &tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; + vcc1-supply = <&vcc5v>; + vcc2-supply = <&vcc5v>; + vcc3-supply = <&vcc5v>; + vcc4-supply = <&vcc5v>; + vcc5-supply = <&vcc5v>; + vcc6-supply = <&vcc5v>; + vcc7-supply = <&vcc5v>; + vccio-supply = <&vcc5v>; regulators { vrtc_reg: regulator@0 { @@ -311,13 +320,6 @@ }; }; -&vbat { - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; -}; - /* SPI Busses */ &am33xx_pinmux { spi0_pins: pinmux_spi0 { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 5e541bd1b45a..2cecb3951e1b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -11,6 +11,17 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + regulators { + compatible = "simple-bus"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; }; /* CAN Busses */ @@ -80,7 +91,7 @@ }; &mmc1 { - vmmc-supply = <&vmmc_reg>; + vmmc-supply = <&vcc3v3>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 22038f21f228..d2450ab0a380 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -304,6 +304,13 @@ >; }; + dcan0_sleep: dcan0_sleep_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + >; + }; + dcan1_default: dcan1_default_pins { pinctrl-single,pins = < 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ @@ -311,6 +318,13 @@ >; }; + dcan1_sleep: dcan1_sleep_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ + >; + }; + vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ @@ -581,8 +595,17 @@ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + /* + * 0x264 represents the offset of padconf register of + * gpio3_22 from am43xx_pinmux base. + */ + interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + <&am43xx_pinmux 0x264>; + interrupt-names = "tsc", "wakeup"; + touchscreen-size-x = <1024>; touchscreen-size-y = <600>; + wakeup-source; }; ov2659@30 { @@ -689,7 +712,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; /* eMMC sits on mmc2 */ @@ -886,14 +909,16 @@ }; &dcan0 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan0_default>; + pinctrl-1 = <&dcan0_sleep>; status = "okay"; }; &dcan1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan1_default>; + pinctrl-1 = <&dcan1_sleep>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index af25801418b4..337fb91ee74c 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -325,7 +325,7 @@ pinctrl-1 = <&mmc1_pins_sleep>; vmmc-supply = <&v3_3d>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &qspi { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 0bb36e9af936..63de2a1b4315 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -563,7 +563,7 @@ vmmc-supply = <&dcdc4>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &usb2_phy1 { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 86c2dfbe8875..47954ed990f8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -376,7 +376,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mac { diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index d55e3ea89fda..d9ba6b879fc1 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -35,6 +35,14 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd_fixed"; + vin-supply = <&vdd_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vtt_fixed: fixedregulator-vtt { /* TPS51200 */ compatible = "regulator-fixed"; @@ -142,6 +150,32 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "BeagleBoard-X15"; + simple-audio-card,widgets = + "Line", "Line Out", + "Line", "Line In"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC2L", "Line In", + "MIC2R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3104>; + clocks = <&clkout2_clk>; + }; + }; }; &dra7_pmx_core { @@ -326,6 +360,36 @@ 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ >; }; + + clkout2_pins_default: clkout2_pins_default { + pinctrl-single,pins = < + 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ + >; + }; + + clkout2_pins_sleep: clkout2_pins_sleep { + pinctrl-single,pins = < + 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ + >; + }; + + mcasp3_pins_default: mcasp3_pins_default { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + >; + }; + + mcasp3_pins_sleep: mcasp3_pins_sleep { + pinctrl-single,pins = < + 0x324 (PIN_INPUT | MUX_MODE15) + 0x328 (PIN_INPUT | MUX_MODE15) + 0x32c (PIN_INPUT | MUX_MODE15) + 0x330 (PIN_INPUT | MUX_MODE15) + >; + }; }; &i2c1 { @@ -511,6 +575,22 @@ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; + + tlv320aic3104: tlv320aic3104@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3104"; + reg = <0x18>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&clkout2_pins_default>; + pinctrl-1 = <&clkout2_pins_sleep>; + status = "okay"; + adc-settle-ms = <40>; + + AVDD-supply = <&vdd_3v3>; + IOVDD-supply = <&vdd_3v3>; + DRVDD-supply = <&vdd_3v3>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c3 { @@ -586,7 +666,7 @@ vmmc-supply = <&ldo1_reg>; bus-width = <4>; - cd-gpios = <&gpio6 27 0>; /* gpio 219 */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ }; &mmc2 { @@ -709,3 +789,38 @@ &pcie1 { gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins_default>; + pinctrl-1 = <&mcasp3_pins_sleep>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 03542f7b5b94..bb280de511da 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -74,7 +74,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index af4dc548c1c0..e2a363b1dd8a 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -69,7 +69,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 0f40d5da28c3..3aa980ad64f0 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -61,7 +61,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -138,6 +139,10 @@ phy-mode = "rgmii-id"; }; + crypto@90000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index a31207860f34..5555875f44f9 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -63,7 +63,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -82,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 00540f292979..78b563c02f3c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -63,7 +63,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -82,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 19475e68b8e9..fbef730e8d37 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -74,7 +74,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts new file mode 100644 index 000000000000..fef0110a8d8a --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts @@ -0,0 +1,36 @@ +/* + * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 2-Bay + * Code name (board/PCB) : Dart 2-Bay + * Model name (case sticker) : SRPD20 + * Material desc (product spec) : STCTxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" + +/ { + model = "Seagate NAS 2-Bay (Dart, SRPD20)"; + compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp"; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 950 2 + 1400 1 + 1800 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts new file mode 100644 index 000000000000..ae2e1fe50ef6 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -0,0 +1,133 @@ +/* + * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 4-Bay + * Code name (board/PCB) : Dart 4-Bay + * Model name (case sticker) : SRPD40 + * Material desc (product spec) : STCUxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" +#include <dt-bindings/leds/leds-ns2.h> + +/ { + model = "Seagate NAS 4-Bay (Dart, SRPD40)"; + compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + pcie-controller { + /* SATA AHCI controller 88SE9170 */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + /* I2C GPIO expander (PCA9554A) */ + pca9554: pca9554@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; + }; + + regulators { + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "SATA2 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>; + }; + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "SATA3 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + red-sata2 { + label = "dart:red:sata2"; + gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; + }; + red-sata3 { + label = "dart:red:sata3"; + gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds-ns2 { + compatible = "lacie,ns2-leds"; + + white-sata2 { + label = "dart:white:sata2"; + cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = <NS_V2_LED_SATA 0 0 + NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 1 1>; + }; + white-sata3 { + label = "dart:white:sata3"; + cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = <NS_V2_LED_SATA 0 0 + NS_V2_LED_OFF 0 1 + NS_V2_LED_ON 1 0 + NS_V2_LED_ON 1 1>; + }; + }; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 800 2 + 1050 1 + 1300 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi new file mode 100644 index 000000000000..3036e25c5992 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -0,0 +1,231 @@ +/* + * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort <vdonnefort@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LEDs associated with HDD 0 and 1. + */ + +#include "armada-370.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* USB 3.0 bridge ASM1042A */ + pcie@2,0 { + status = "okay"; + }; + }; + + internal-regs { + serial@12000 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@70000 { + status = "okay"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + status = "okay"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + + /* RTC - NXP 8563T (second source) */ + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; + /* RTC - MCP7940NT */ + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupts = <110>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + partition@300000 { + label = "device-tree"; + reg = <0x300000 0x20000>; + }; + partition@320000 { + label = "linux"; + reg = <0x320000 0x2000000>; + }; + partition@2320000 { + label = "rootfs"; + reg = <0x2320000 0xdce0000>; + }; + }; + }; + + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH + &gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@2 { + label = "Backup button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + white-power { + label = "dart:white:power"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + + }; + red-power { + label = "dart:red:power"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + }; + red-sata0 { + label = "dart:red:sata0"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + red-sata1 { + label = "dart:red:sata1"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; + pinctrl-names = "default"; + + hdd0_led_sata_pin: hdd0-led-sata-pin { + marvell,pins = "mpp48"; + marvell,function = "sata1"; + }; + hdd0_led_gpio_pin: hdd0-led-gpio-pin { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + hdd1_led_sata_pin: hdd1-led-sata-pin { + marvell,pins = "mpp57"; + marvell,function = "sata0"; + }; + hdd1_led_gpio_pin: hdd1-led-gpio-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts new file mode 100644 index 000000000000..3c91f9821c89 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts @@ -0,0 +1,51 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud 2-Bay + * Code name (board/PCB) : Cumulus Max + * Model name (case sticker) : SRN22C + * Material desc (product spec) : STCSxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)"; + compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts new file mode 100644 index 000000000000..aad39e97af43 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts @@ -0,0 +1,37 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud + * Code name (board/PCB) : Cumulus + * Model name (case sticker) : SRN21C + * Material desc (product spec) : STCRxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud (Cumulus, SRN21C)"; + compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi new file mode 100644 index 000000000000..1aba08e4377c --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -0,0 +1,178 @@ +/* + * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay + * (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LED. + */ + +#include "armada-370.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + coherency-fabric@20200 { + broken-idle; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + spi@10600 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "USB VBUS error"; + linux,code = <KEY_UNKNOWN>; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-sata0 { + label = "cumulus:red:sata0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pinctrl-0 = <&sata_led_pin>; + pinctrl-names = "default"; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp60"; + marvell,function = "sata0"; + }; + gpio_led_pin: gpio-led-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 4f4924362bf0..836bcc07afc5 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -77,7 +77,8 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 53a1a5abe147..3b06aa835448 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -256,6 +256,11 @@ reg = <0x20800 0x8>; }; + cpu-config@21000 { + compatible = "marvell,armada-370-cpu-config"; + reg = <0x21000 0x8>; + }; + audio_controller: audio-controller@30000 { #sound-dai-cells = <1>; compatible = "marvell,armada370-audio"; @@ -319,6 +324,38 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; }; + + crypto@90000 { + compatible = "marvell,armada-370-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>; + clocks = <&gateclk 23>; + clock-names = "cesa0"; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x7e0>; + }; + }; + + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x01) 0 0x800>; + reg-names = "sram"; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>; + + /* + * The Armada 370 has an erratum preventing the use of + * the standard workflow for CPU idle support (relying + * on the BootROM code to enter/exit idle state). + * Reserve some amount of the crypto SRAM to put the + * cpuidle workaround. + */ + idle-sram@0 { + reg = <0x0 0x20>; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 5711b97e876c..cded5f0a262d 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index e9a381741ce1..7ccce7529b0c 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -513,6 +513,21 @@ }; }; + crypto@90000 { + compatible = "marvell,armada-375-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 30>, <&gateclk 31>, + <&gateclk 28>, <&gateclk 29>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + sata@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x5000>; @@ -619,5 +634,23 @@ }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x09) 0 0x800>; + clocks = <&gateclk 30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x05) 0 0x800>; + clocks = <&gateclk 31>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 4047621b137e..acd5b1519edb 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -59,7 +59,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi1: spi@10680 { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 74a9c6b54fa7..3710755c6d76 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -57,7 +57,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 91ac8c118f37..ff47af57f091 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -64,7 +64,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 353c92532e7a..a633be3defda 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -58,7 +58,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { @@ -205,8 +207,21 @@ sdhci@d8000 { pinctrl-names = "default"; pinctrl-0 = <&sdhci_pins>; - cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; no-1-8-v; + /* + * A388-GP board v1.5 and higher replace + * hitherto card detection method based on GPIO + * with the one using DAT3 pin. As they are + * incompatible, software-based polling is + * enabled with 'broken-cd' property. For boards + * older than v1.5 it can be replaced with: + * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;', + * whereas for the newer ones following can be + * used instead: + * 'dat3-cd;' + * 'cd-inverted;' + */ + broken-cd; wp-inverted; bus-width = <8>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index b657b1687e5f..853f9735cc70 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index f9f2347d9995..c6a0e9d7f1a9 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -509,6 +509,21 @@ clocks = <&gateclk 4>; }; + crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; @@ -584,6 +599,24 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x19) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x15) 0 0x800>; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 60bbfe32bb80..23fc670c0427 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -69,7 +69,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 7dd900f158be..f774101416a5 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -75,7 +75,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index bf724ca96a33..4878d7353069 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -94,7 +94,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 06a6a6c1fdf7..58b500873bfd 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -64,7 +64,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index fdd187c55aa5..6e9820e141f8 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -69,7 +69,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index f894bc83e957..6ab33837a2b6 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -67,7 +67,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 1516fc2627f9..6fe8972de0a2 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -63,7 +63,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; @@ -88,41 +90,10 @@ }; internal-regs { - /* Two rear eSATA ports */ - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - serial@12000 { - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - /* Front USB 2.0 port */ - usb@50000 { - status = "okay"; + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; }; i2c@11000 { @@ -130,12 +101,6 @@ clock-frequency = <400000>; status = "okay"; - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - isil,irq2-can-wakeup-machine; - }; - /* Controller for rear fan #1 of 3 (Protechnic * MGT4012XB-O20, 8000RPM) near eSATA port */ g762_fan1: g762@3e { @@ -172,6 +137,49 @@ compatible = "gmt,g751"; reg = <0x4c>; }; + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + isil,irq2-can-wakeup-machine; + }; + }; + + serial@12000 { + status = "okay"; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* Two rear eSATA ports */ + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; nand@d0000 { diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 990e8a2100f0..a5db17782e08 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,7 +65,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 - MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 20267ad2f61e..2391b11dc546 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -77,7 +77,9 @@ soc { ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000 - MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 3de9b761cc1a..be23196829bb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -184,6 +184,11 @@ reg = <0x20800 0x20>; }; + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; + eth2: ethernet@30000 { compatible = "marvell,armada-xp-neta"; reg = <0x30000 0x4000>; @@ -236,6 +241,18 @@ compatible = "marvell,armada-xp-neta"; }; + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -256,6 +273,24 @@ }; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x09) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x05) 0 0x800>; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; clocks { diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e8d63afdb135..e07c2b206beb 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -44,6 +44,7 @@ */ /dts-v1/; #include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" / { model = "Atmel SAMA5D2 Xplained"; @@ -92,6 +93,8 @@ apb { spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; m25p80@0 { @@ -102,25 +105,92 @@ }; macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; status = "okay"; }; uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; status = "okay"; }; i2c0: i2c@f8028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + status = "okay"; + + regulators { + vdd_1v35_reg: DCDC_REG1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: DCDC_REG2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: DCDC_REG3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: LDO_REG1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: LDO_REG2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: LDO_REG3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: LDO_REG4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; }; uart3: serial@fc008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; i2c1: i2c@fc028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; at24@54 { @@ -129,6 +199,54 @@ pagesize = <16>; }; }; + + pinctrl@fc038000 { + pinctrl_i2c0_default: i2c0_default { + pinmux = <PIN_PD21__TWD0>, + <PIN_PD22__TWCK0>; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = <PIN_PD4__TWD1>, + <PIN_PD5__TWCK1>; + bias-disable; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = <PIN_PB14__GTXCK>, + <PIN_PB15__GTXEN>, + <PIN_PB16__GRXDV>, + <PIN_PB17__GRXER>, + <PIN_PB18__GRX0>, + <PIN_PB19__GRX1>, + <PIN_PB20__GTX0>, + <PIN_PB21__GTX1>, + <PIN_PB22__GMDC>, + <PIN_PB23__GMDIO>; + bias-disable; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = <PIN_PA14__SPI0_SPCK>, + <PIN_PA15__SPI0_MOSI>, + <PIN_PA16__SPI0_MISO>, + <PIN_PA17__SPI0_NPCS0>; + bias-disable; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = <PIN_PD2__URXD1>, + <PIN_PD3__UTXD1>; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = <PIN_PB11__URXD3>, + <PIN_PB12__UTXD3>; + bias-disable; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d81474e0bcd6..8488ac53d22d 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -76,7 +76,7 @@ pmic: act8865@5b { compatible = "active-semi,act8865"; reg = <0x5b>; - status = "okay"; + status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 07f46963335b..45371a1b61b3 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -246,7 +246,7 @@ d8 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; - status = "disabled"; + default-state = "on"; }; d10 { diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 49a59c7e4a5d..6d272c0125e3 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -148,6 +148,25 @@ clocks = <&pck2>; clock-names = "mclk"; }; + + qt1070:keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <25 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + + atmel_mxt_ts@4c { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4c>; + interrupt-parent = <&pioE>; + interrupts = <24 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mxt_ts>; + }; }; macb0: ethernet@f8020000 { @@ -204,6 +223,14 @@ atmel,pins = <AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */ }; + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + <AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + pinctrl_mxt_ts: mxt_irq { + atmel,pins = + <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 60edd8baebb8..f6cb7a80a2f5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -426,7 +426,7 @@ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffd4000 { @@ -437,7 +437,7 @@ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc2: ssc@fffd8000 { @@ -448,7 +448,7 @@ pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; clocks = <&ssc2_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index be9c027ddd97..d4884dd1c243 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -100,7 +100,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9260-pmc"; + compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ce1e3e94a40c..5e09de4eb9cd 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,7 +568,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index f1f5fa3a9e6e..93446420af25 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 18b8b9e29704..af8b708ac312 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -114,7 +114,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index d1ae60a855d4..9d16ef8453c5 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -198,6 +198,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 32bc9a189db0..95569a87b6c9 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9n12-pmc"; + compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index efa75064d38a..acf3451a332d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,10 +71,6 @@ }; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 @@ -204,13 +200,13 @@ }; d9 { - label = "d6"; + label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { - label = "d7"; + label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index a0b90aedd3b8..6d829db4e887 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -814,7 +814,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 747d8f070a5c..0827d594b1f0 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -68,7 +68,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <5000000>; + clock-frequency = <1000000>; }; }; @@ -105,7 +105,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9x5-pmc"; + compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -1043,6 +1043,7 @@ atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res = <8 10>; atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index d237c462dfc6..52425a4ca97e 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -66,6 +66,8 @@ isi_0: endpoint@0 { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; @@ -100,6 +102,12 @@ }; }; + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + pinctrl@fffff400 { camera_sensor { pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 24c935c72e5e..051ab3ba9a65 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -89,4 +89,9 @@ regulator-name = "ldo5"; }; }; + + usb_power_supply: usb_power_supply { + compatible = "x-powers,axp202-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi new file mode 100644 index 000000000000..76302f58c478 --- /dev/null +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -0,0 +1,143 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP221/221s/223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf + */ + +&axp22x { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + regulator-name = "dcdc1"; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_dcdc4: dcdc4 { + regulator-name = "dcdc4"; + }; + + reg_dcdc5: dcdc5 { + regulator-name = "dcdc5"; + }; + + reg_dc1sw: dc1sw { + regulator-name = "dc1sw"; + }; + + reg_dc5ldo: dc5ldo { + regulator-name = "dc5ldo"; + }; + + reg_aldo1: aldo1 { + regulator-name = "aldo1"; + }; + + reg_aldo2: aldo2 { + regulator-name = "aldo2"; + }; + + reg_aldo3: aldo3 { + regulator-name = "aldo3"; + }; + + reg_dldo1: dldo1 { + regulator-name = "dldo1"; + }; + + reg_dldo2: dldo2 { + regulator-name = "dldo2"; + }; + + reg_dldo3: dldo3 { + regulator-name = "dldo3"; + }; + + reg_dldo4: dldo4 { + regulator-name = "dldo4"; + }; + + reg_eldo1: eldo1 { + regulator-name = "eldo1"; + }; + + reg_eldo2: eldo2 { + regulator-name = "eldo2"; + }; + + reg_eldo3: eldo3 { + regulator-name = "eldo3"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-name = "ldo_io0"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-name = "ldo_io1"; + }; + + reg_rtc_ldo: rtc_ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "rtc_ldo"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index e1ac07a16f92..2778533502d9 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -32,6 +32,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/bcm-cygnus.h> #include "skeleton.dtsi" @@ -54,197 +55,212 @@ /include/ "bcm-cygnus-clock.dtsi" - pinctrl: pinctrl@0x0301d0c8 { - compatible = "brcm,cygnus-pinmux"; - reg = <0x0301d0c8 0x30>, - <0x0301d24c 0x2c>; - }; - - gpio_crmu: gpio@03024800 { - compatible = "brcm,cygnus-crmu-gpio"; - reg = <0x03024800 0x50>, - <0x03024008 0x18>; - #gpio-cells = <2>; - gpio-controller; - }; - - gpio_ccm: gpio@1800a000 { - compatible = "brcm,cygnus-ccm-gpio"; - reg = <0x1800a000 0x50>, - <0x0301d164 0x20>; - #gpio-cells = <2>; - gpio-controller; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - }; + core { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; - gpio_asiu: gpio@180a5000 { - compatible = "brcm,cygnus-asiu-gpio"; - reg = <0x180a5000 0x668>; - #gpio-cells = <2>; - gpio-controller; + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; - pinmux = <&pinctrl>; + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; - interrupt-controller; - interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; }; - amba { + axi { + compatible = "simple-bus"; + ranges; #address-cells = <1>; #size-cells = <1>; - compatible = "arm,amba-bus", "simple-bus"; - interrupt-parent = <&gic>; - ranges; - wdt@18009000 { - compatible = "arm,sp805" , "arm,primecell"; - reg = <0x18009000 0x1000>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + pinctrl: pinctrl@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; }; - }; - i2c0: i2c@18008000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - status = "disabled"; - }; + gpio_crmu: gpio@03024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + #gpio-cells = <2>; + gpio-controller; + }; - i2c1: i2c@1800b000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x1800b000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; - clock-frequency = <100000>; - status = "disabled"; - }; + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; + wdt0: wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; + }; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + }; - linux,pci-domain = <0>; + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + clock-frequency = <100000>; + status = "disabled"; + }; - bus-range = <0x00 0xff>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - status = "disabled"; - }; + linux,pci-domain = <0>; - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; + bus-range = <0x00 0xff>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - linux,pci-domain = <1>; + status = "disabled"; + }; - bus-range = <0x00 0xff>; + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - status = "disabled"; - }; + linux,pci-domain = <1>; - uart0: serial@18020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + bus-range = <0x00 0xff>; - uart1: serial@18021000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18021000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - uart2: serial@18022000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + status = "disabled"; + }; - uart3: serial@18023000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18023000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - nand: nand@18046000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; - reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; - interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - #address-cells = <1>; - #size-cells = <0>; + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - brcm,nand-has-wp; - }; + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - gic: interrupt-controller@19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x19021000 0x1000>, - <0x19020100 0x100>; - }; + nand: nand@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, + <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x19022000 0x1000>; - cache-unified; - cache-level = <2>; - }; + #address-cells = <1>; + #size-cells = <0>; - timer@19020200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x19020200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - }; + brcm,nand-has-wp; + }; + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + + pinmux = <&pinctrl>; + + interrupt-controller; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + }; + + touchscreen: tsc@180a6000 { + compatible = "brcm,iproc-touchscreen"; + reg = <0x180a6000 0x40>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi new file mode 100644 index 000000000000..58aca277e4a7 --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -0,0 +1,119 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,nsp"; + model = "Broadcom Northstar Plus SoC"; + interrupt-parent = <&gic>; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x19020000 0x00003000>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x0200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&periph_clk>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; + + axi { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@18000300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <62499840>; + status = "disabled"; + }; + + uart1: serial@18000400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <62499840>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts new file mode 100644 index 000000000000..b2bff43b135c --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -0,0 +1,30 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model A+"; + + leds { + act { + gpios = <&gpio 47 0>; + }; + + pwr { + label = "PWR"; + gpios = <&gpio 35 0>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts new file mode 100644 index 000000000000..eab8b5916e8a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -0,0 +1,23 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; + model = "Raspberry Pi Model B rev2"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index ee89b79426cf..ff6b2d1c6c90 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -13,11 +13,5 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; - - /* I2S interface */ - i2s_alt2: i2s_alt2 { - brcm,pins = <28 29 30 31>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; + pinctrl-0 = <&gpioout &alt0 &alt3>; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index ab5474e5d1c8..3572f0367baf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -52,6 +52,10 @@ clock-frequency = <100000>; }; +&i2c2 { + status = "okay"; +}; + &sdhci { status = "okay"; bus-width = <4>; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 301c73f4ca33..aef64de77495 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ #include <dt-bindings/pinctrl/bcm2835.h> +#include <dt-bindings/clock/bcm2835.h> #include "skeleton.dtsi" / { @@ -21,6 +22,10 @@ compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + /* This could be a reference to BCM2835_CLOCK_TIMER, + * but we don't have the driver using the common clock + * support yet. + */ clock-frequency = <1000000>; }; @@ -57,6 +62,17 @@ reg = <0x7e100000 0x28>; }; + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + + /* CPRMAN derives everything from the platform's + * oscillator. + */ + clocks = <&clk_osc>; + }; + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; @@ -92,11 +108,13 @@ #interrupt-cells = <2>; }; - uart@7e201000 { + uart0: uart@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; - clock-frequency = <3000000>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; arm,primecell-periphid = <0x00241011>; }; @@ -115,7 +133,7 @@ compatible = "brcm,bcm2835-spi"; reg = <0x7e204000 0x1000>; interrupts = <2 22>; - clocks = <&clk_spi>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -125,7 +143,7 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -135,7 +153,7 @@ compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; - clocks = <&clk_mmc>; + clocks = <&clocks BCM2835_CLOCK_EMMC>; status = "disabled"; }; @@ -143,7 +161,17 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -165,28 +193,14 @@ #address-cells = <1>; #size-cells = <0>; - clk_mmc: clock@0 { + /* The oscillator is the root of the clock tree. */ + clk_osc: clock@3 { compatible = "fixed-clock"; - reg = <0>; + reg = <3>; #clock-cells = <0>; - clock-output-names = "mmc"; - clock-frequency = <100000000>; + clock-output-names = "osc"; + clock-frequency = <19200000>; }; - clk_i2c: clock@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-output-names = "i2c"; - clock-frequency = <250000000>; - }; - - clk_spi: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-output-names = "spi"; - clock-frequency = <250000000>; - }; }; }; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 64b8d10ccff8..ca92bba6a8c5 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -24,6 +24,17 @@ reg = <0x00000000 0x08000000>; }; + axi@18000000 { + usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + }; + leds { compatible = "gpio-leds"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index aedf3c426e1f..8ade7def2e8a 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts new file mode 100644 index 000000000000..a22ed144040b --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -0,0 +1,106 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R7000 + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R7000"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 3b6b17560687..4791321969b3 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -143,6 +143,12 @@ brcm,irq-can-wake; }; + aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x200>, <0x410200 0x400>; + reg-names = "aon-ctrl", "aon-sram"; + }; + nand: nand@3e2800 { status = "disabled"; #address-cells = <1>; @@ -219,6 +225,84 @@ }; + memory_controllers { + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf1100000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@1 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@2 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + }; + + sram@ffe00000 { + compatible = "brcm,boot-sram", "mmio-sram"; + reg = <0x0 0xffe00000 0x0 0x10000>; + }; + smpboot { compatible = "brcm,brcmstb-smpboot"; syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 7db484323fd6..8b3800f46288 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -39,19 +39,11 @@ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; compatible = "brcm,bcm11360", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; }; - uart3: serial@18023000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -64,3 +56,23 @@ }; }; }; + +&uart3 { + status = "okay"; +}; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts index 9658d4f62d59..091c73a46e08 100644 --- a/arch/arm/boot/dts/bcm911360k.dts +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -43,11 +43,10 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index 2f63052f9d48..b4a1392bd5a6 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus SVK (BCM958300K)"; @@ -43,35 +44,34 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - pcie0: pcie@18012000 { - status = "okay"; - }; +&pcie0 { + status = "okay"; +}; - pcie1: pcie@18013000 { - status = "okay"; - }; +&pcie1 { + status = "okay"; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; +}; - nand: nand@18046000 { - nandcs@1 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; - nand-ecc-strength = <24>; - nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; - brcm,nand-oob-sector-size = <27>; - }; + brcm,nand-oob-sector-size = <27>; }; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 56b429abbedb..3378683321d3 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus Wireless Audio (BCM958305K)"; @@ -43,11 +44,42 @@ }; chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; - uart3: serial@18023000 { - status = "okay"; + brcm,nand-oob-sector-size = <27>; }; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts new file mode 100644 index 000000000000..16303dbd35df --- /dev/null +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -0,0 +1,57 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625K)"; + compatible = "brcm,bcm58625", "brcm,nsp"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi new file mode 100644 index 000000000000..65397c088335 --- /dev/null +++ b/arch/arm/boot/dts/bcm9hmidc.dtsi @@ -0,0 +1,42 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Broadcom human machine interface daughter card (bcm9hmidc) installed on + * bcm958300k/bcm958305k boards + */ + +&touchscreen { + touchscreen-inverted-x; + touchscreen-inverted-y; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 5c99fb3a4d10..3c0907b87fd6 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -45,7 +45,8 @@ compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index ef811de09908..eaadac3bdd44 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -47,6 +47,12 @@ model = "Marvell Armada 1500 (BG2) SoC"; compatible = "marvell,berlin2", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -57,6 +63,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { @@ -404,6 +420,13 @@ }; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 772165ad0a52..8ba8b50ce997 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -46,7 +46,8 @@ compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 900213d78a32..b16df157214d 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -47,6 +47,11 @@ model = "Marvell Armada 1500-mini (BG2CD) SoC"; compatible = "marvell,berlin2cd", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -56,6 +61,14 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 800000 1200000 + 600000 1200000 + >; }; }; @@ -368,6 +381,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 4a749e5b3b44..da28c9704a9d 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -49,7 +49,8 @@ }; choosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; regulators { diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index d4dbd28d348c..8ea177f375dd 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -43,6 +43,11 @@ model = "Marvell Armada 1500 pro (BG2-Q) SoC"; compatible = "marvell,berlin2q", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -53,6 +58,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { @@ -477,6 +493,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index df4c6f1f93f9..a5a23c376418 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -95,6 +95,13 @@ timeout-sec = <15>; }; + pinctrl: pinctrl@f0000e20 { + compatible = "cnxt,cx92755-pinctrl"; + reg = <0xf0000e20 0x100>; + gpio-controller; + #gpio-cells = <2>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index 5da00806c41e..026f556c8c50 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -70,8 +70,17 @@ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_default>; + pinctrl-names = "default"; }; &i2c { status = "okay"; }; + +&pinctrl { + uart0_default: uart0_active { + pins = "GP_O0", "GP_O1"; + function = "client_b"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 179121630ad7..cd58c2e62757 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -263,12 +263,13 @@ }; crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xffffe000 0x800>; - reg-names = "regs", "sram"; + compatible = "marvell,dove-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; interrupts = <31>; clocks = <&gate_clk 15>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; status = "okay"; }; @@ -767,6 +768,14 @@ interrupts = <47>; status = "disabled"; }; + + crypto_sram: sa-sram@ffffe000 { + compatible = "mmio-sram"; + reg = <0xffffe000 0x800>; + clocks = <&gate_clk 15>; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a6c82e5b64fe..864f60020124 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -9,6 +9,8 @@ #include "dra74x.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> +#include <dt-bindings/input/input.h> / { model = "TI DRA742"; @@ -28,13 +30,22 @@ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; - mmc2_3v3: fixedregulator-mmc2 { + evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; - regulator-name = "mmc2_3v3"; + regulator-name = "evm_3v3_sw"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3_sw>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; @@ -55,6 +66,86 @@ enable-active-high; gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = <BTN_0>; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = <BTN_1>; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; }; &dra7_pmx_core { @@ -283,6 +374,31 @@ 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (MUX_MODE15) + 0x328 (MUX_MODE15) + 0x32c (MUX_MODE15) + 0x330 (MUX_MODE15) + >; + }; }; &i2c1 { @@ -410,6 +526,17 @@ }; }; + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575"; reg = <0x21>; @@ -422,6 +549,20 @@ #interrupt-cells = <2>; }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c2 { @@ -429,6 +570,20 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; + + pcf_hdmi: gpio@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; }; &i2c3 { @@ -479,12 +634,12 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; }; &mmc2 { status = "okay"; - vmmc-supply = <&mmc2_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; @@ -707,3 +862,62 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8fedddc35999..bc672fb91466 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -292,6 +292,11 @@ #thermal-sensor-cells = <1>; }; + dsp1_system: dsp_system@40d00000 { + compatible = "syscon"; + reg = <0x40d00000 0x100>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; @@ -911,6 +916,46 @@ status = "disabled"; }; + mmu0_dsp1: mmu@40d01000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d01000 0x100>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp1: mmu@40d02000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d02000 0x100>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + status = "disabled"; + }; + + mmu_ipu1: mmu@58882000 { + compatible = "ti,dra7-iommu"; + reg = <0x58882000 0x100>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu_ipu1"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + + mmu_ipu2: mmu@55082000 { + compatible = "ti,dra7-iommu"; + reg = <0x55082000 0x100>; + interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu_ipu2"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v3"; regulator-name = "abb_mpu"; @@ -1404,6 +1449,21 @@ status = "disabled"; }; + mcasp3: mcasp@48468000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp3"; + reg = <0x48468000 0x2000>; + reg-names = "mpu"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; + dma-names = "tx", "rx"; + clocks = <&mcasp3_ahclkx_mux>; + clock-names = "fck"; + status = "disabled"; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6f6bd98c98df..d6104d5f0c01 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -9,6 +9,7 @@ #include "dra72x.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clk/ti-dra7-atl.h> / { model = "TI DRA722"; @@ -30,6 +31,15 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; @@ -93,6 +103,40 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; }; &dra7_pmx_core { @@ -110,6 +154,13 @@ >; }; + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + nand_default: nand_default { pinctrl-single,pins = < 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ @@ -220,6 +271,31 @@ 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) + >; + }; }; &i2c1 { @@ -353,12 +429,21 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + }; - cpsw_sel_s0 { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-low; - }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3>; + IOVDD-supply = <&evm_3v3>; + DRVDD-supply = <&evm_3v3>; + DVDD-supply = <&aic_dvdd>; }; }; @@ -380,6 +465,14 @@ * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 */ lines-initial-states = <0x0f2b>; + + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; }; }; @@ -514,7 +607,7 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is a viable alternative */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; max-frequency = <192000000>; }; @@ -590,6 +683,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; slaves = <1>; + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; }; &cpsw_emac0 { @@ -695,3 +789,59 @@ }; }; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = <DRA7_ATL_WS_MCASP2_FSX>; + aws = <DRA7_ATL_WS_MCASP3_FSX>; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index eaca143faa77..70a217050a4c 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -45,3 +45,24 @@ <&dss_video1_clk>; clock-names = "fck", "video1_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index feea98e0a4b5..8bcc47db1cd1 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -52,6 +52,11 @@ }; ocp { + dsp2_system: dsp_system@41500000 { + compatible = "syscon"; + reg = <0x41500000 0x100>; + }; + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; @@ -76,6 +81,26 @@ dr_mode = "otg"; }; }; + + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + status = "disabled"; + }; }; }; @@ -93,3 +118,29 @@ <&dss_video2_clk>; clock-names = "fck", "video1_clk", "video2_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 540a0adf2be6..443a35085846 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -52,13 +52,13 @@ regulator-name = "V_EMMC_2.8V-fixed"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -161,6 +161,7 @@ }; &exynos_usbphy { + vbus-supply = <&safeout_reg>; status = "okay"; }; @@ -266,14 +267,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 41a5fafb9aa9..3e64d5dcdd60 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -49,7 +49,7 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -153,6 +153,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout_reg>; }; &hsotg { @@ -188,8 +189,8 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 0>; - te-gpios = <&gpx0 6 0>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; reset-delay = <5>; @@ -368,14 +369,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 033def482fc3..2f30d632f1cc 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -333,7 +333,7 @@ }; mshc_0: mshc@12510000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; interrupts = <0 142 0>; clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; @@ -345,7 +345,7 @@ }; mshc_1: mshc@12520000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; interrupts = <0 143 0>; clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 98c0a368b777..3184e10f260a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -431,6 +431,8 @@ interrupts = <0 52 0>; clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -440,6 +442,8 @@ interrupts = <0 53 0>; clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -449,6 +453,8 @@ interrupts = <0 54 0>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 17>, <&pdma0 18>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -458,6 +464,8 @@ interrupts = <0 55 0>; clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index e050d85cdacd..b8f866991bdd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -57,35 +58,35 @@ up { label = "Up"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <KEY_UP>; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_DOWN>; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; gpio-key,wakeup; }; @@ -94,7 +95,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 043b03caff8f..bc1448ba95d3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -182,7 +183,7 @@ }; &spi_2 { - cs-gpios = <&gpc1 2 0>; + cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>; status = "okay"; w25x80@0 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index ba34886f8b65..a50be640f1b0 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Trats based on Exynos4210"; @@ -39,7 +40,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -48,7 +49,7 @@ regulator-name = "TSP_FIXED_VOLTAGES"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 0>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -57,7 +58,7 @@ regulator-name = "8M_AF_2.8V_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk1 1 0>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -66,7 +67,7 @@ regulator-name = "CAM_IO_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 1 0>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -75,7 +76,7 @@ regulator-name = "8M_1.2V_EN"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpe2 5 0>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -84,7 +85,7 @@ regulator-name = "VT_CORE_1.5V"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&gpe2 2 0>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -93,21 +94,21 @@ compatible = "gpio-keys"; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -115,7 +116,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <10>; @@ -218,7 +219,7 @@ compatible = "samsung,s6e8aa0"; vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -251,6 +252,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safe1_sreg>; }; &fimd { @@ -304,9 +306,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, @@ -448,7 +450,6 @@ safe1_sreg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safe2_sreg: ESAFEOUT2 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index eb379526e234..81b7ec7b3e31 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -65,7 +66,7 @@ regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe1 3 0>; + gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -73,21 +74,21 @@ compatible = "gpio-keys"; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <1>; }; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <1>; }; config-key { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <171>; label = "config"; debounce-interval = <1>; @@ -95,14 +96,14 @@ }; camera-key { - gpios = <&gpx2 3 1>; + gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; linux,code = <212>; label = "camera"; debounce-interval = <1>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <1>; @@ -110,7 +111,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <1>; @@ -122,7 +123,7 @@ regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 3 0>; + gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -131,17 +132,17 @@ #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 0>; - gpio-mosi = <&gpy3 3 0>; + gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 0>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; lcd@0 { compatible = "samsung,ld9040"; reg = <0>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; spi-cpol; spi-cpha; @@ -218,13 +219,13 @@ regulator-name = "HDMI_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpe0 1 0>; + gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 0 &gpe4 3 0>; + gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -248,6 +249,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout1_reg>; }; &fimd { @@ -267,7 +269,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; @@ -311,7 +313,8 @@ compatible = "maxim,max8952"; reg = <0x60>; - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; max8952,default-mode = <0>; max8952,dvs-mode-microvolt = <1250000>, <1200000>, <1050000>, <950000>; @@ -330,13 +333,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, <1100000>, <1000000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; regulators { @@ -486,7 +489,6 @@ safeout1_reg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safeout2_reg: ESAFEOUT2 { @@ -551,7 +553,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index db52841297a5..edf0fc8db6ff 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/clock/maxim,max77686.h> #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> / { chosen { @@ -30,7 +31,7 @@ power_key { interrupt-parent = <&gpx1>; interrupts = <3 0>; - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "power key"; debounce-interval = <10>; @@ -70,7 +71,7 @@ pinctrl-0 = <&sd1_cd>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpk1 2 1>; + reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; }; camera { @@ -181,7 +182,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; @@ -199,8 +200,6 @@ }; &i2c_0 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <400000>; status = "okay"; @@ -209,9 +208,9 @@ compatible = "smsc,usb3503"; reg = <0x08>; - intn-gpios = <&gpx3 0 0>; - connect-gpios = <&gpx3 4 0>; - reset-gpios = <&gpx3 5 0>; + intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; initial-mode = <1>; }; @@ -276,15 +275,13 @@ regulator-always-on; }; - ldo8_reg: ldo@8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VDD10_HDMI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - ldo10_reg: ldo@10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VDDQ_MIPIHSI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -424,8 +421,6 @@ }; &i2c_1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; status = "okay"; max98090: max98090@10 { compatible = "maxim,max98090"; @@ -440,8 +435,6 @@ &i2c_2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; }; &i2c_8 { @@ -490,7 +483,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo4_reg &ldo21_reg>; - cd-gpios = <&gpk2 2 0>; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 8632f35c6c26..646ff0bd001a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -27,11 +27,54 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 10000 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 102 170 230>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 7 7>; + }; + map1 { + trip = <&cpu_alert2>; + cooling-device = <&cpu0 13 13>; + }; + map2 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map3 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map4 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; + }; + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; }; &usb3503 { diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 679ac103ebf6..b44bb682e976 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -26,13 +26,13 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2:mmc0"; - gpios = <&gpc1 2 1>; + gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "mmc0"; }; @@ -44,7 +44,7 @@ home_key { interrupt-parent = <&gpx2>; interrupts = <2 0>; - gpios = <&gpx2 2 0>; + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = <KEY_HOME>; label = "home key"; debounce-interval = <10>; @@ -57,7 +57,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 1>; + gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9d528af68c1a..c8d86af2fb98 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -107,13 +108,13 @@ s5m8767,pmic-buck-default-dvs-idx = <3>; - s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; - s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, - <&gpm3 6 0>, - <&gpm3 7 0>; + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>, + <&gpm3 6 GPIO_ACTIVE_HIGH>, + <&gpm3 7 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, <1200000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 525684ca8dc0..4840bbdaa9ec 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "FriendlyARM TINY4412 board based on Exynos4412"; @@ -31,26 +32,26 @@ led1 { label = "led1"; - gpios = <&gpm4 0 1>; + gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2"; - gpios = <&gpm4 1 1>; + gpios = <&gpm4 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { label = "led3"; - gpios = <&gpm4 2 1>; + gpios = <&gpm4 2 GPIO_ACTIVE_LOW>; default-state = "off"; }; led4 { label = "led4"; - gpios = <&gpm4 3 1>; + gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 2a1ebb76ebe0..40a474c4374b 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -65,7 +65,7 @@ regulator-name = "CAM_SENSOR_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 2 0>; + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -74,7 +74,7 @@ regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 0>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -83,7 +83,7 @@ regulator-name = "CAM_AF"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 4 0>; + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,7 +92,7 @@ regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 0>; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -101,21 +101,21 @@ compatible = "gpio-keys"; key-down { - gpios = <&gpx3 3 1>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -123,7 +123,7 @@ }; key-ok { - gpios = <&gpx0 1 1>; + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; linux,code = <139>; label = "ok"; debounce-inteval = <10>; @@ -198,7 +198,7 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 0>, <&gpy2 5 0>; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -207,13 +207,13 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - gpios = <&gpj0 7 0>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; }; }; i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 1>, <&gpf0 1 1>; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -359,7 +359,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -391,6 +391,7 @@ }; &exynos_usbphy { + vbus-supply = <&esafeout1_reg>; status = "okay"; }; @@ -446,7 +447,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 0>; + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; port { is_s5k6a3_ep: endpoint { @@ -488,8 +489,8 @@ s5c73m3@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; - standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ vdd-int-supply = <&buck9_reg>; vddio-cis-supply = <&ldo9_reg>; vdda-supply = <&ldo17_reg>; @@ -564,16 +565,14 @@ #clock-cells = <1>; voltage-regulators { - ldo1_reg: ldo1 { - regulator-compatible = "LDO1"; + ldo1_reg: LDO1 { regulator-name = "VALIVE_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - ldo2_reg: ldo2 { - regulator-compatible = "LDO2"; + ldo2_reg: LDO2 { regulator-name = "VM1M2_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -583,32 +582,28 @@ }; }; - ldo3_reg: ldo3 { - regulator-compatible = "LDO3"; + ldo3_reg: LDO3 { regulator-name = "VCC_1.8V_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo4_reg: ldo4 { - regulator-compatible = "LDO4"; + ldo4_reg: LDO4 { regulator-name = "VCC_2.8V_AP"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - ldo5_reg: ldo5 { - regulator-compatible = "LDO5"; + ldo5_reg: LDO5 { regulator-name = "VCC_1.8V_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo6_reg: ldo6 { - regulator-compatible = "LDO6"; + ldo6_reg: LDO6 { regulator-name = "VMPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -618,8 +613,7 @@ }; }; - ldo7_reg: ldo7 { - regulator-compatible = "LDO7"; + ldo7_reg: LDO7 { regulator-name = "VPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -629,8 +623,7 @@ }; }; - ldo8_reg: ldo8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -639,15 +632,13 @@ }; }; - ldo9_reg: ldo9 { - regulator-compatible = "LDO9"; + ldo9_reg: LDO9 { regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo10_reg: ldo10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -656,8 +647,7 @@ }; }; - ldo11_reg: ldo11 { - regulator-compatible = "LDO11"; + ldo11_reg: LDO11 { regulator-name = "VABB1_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -667,8 +657,7 @@ }; }; - ldo12_reg: ldo12 { - regulator-compatible = "LDO12"; + ldo12_reg: LDO12 { regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -677,15 +666,13 @@ }; }; - ldo13_reg: ldo13 { - regulator-compatible = "LDO13"; + ldo13_reg: LDO13 { regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo14_reg: ldo14 { - regulator-compatible = "LDO14"; + ldo14_reg: LDO14 { regulator-name = "VABB2_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -695,8 +682,7 @@ }; }; - ldo15_reg: ldo15 { - regulator-compatible = "LDO15"; + ldo15_reg: LDO15 { regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -705,8 +691,7 @@ }; }; - ldo16_reg: ldo16 { - regulator-compatible = "LDO16"; + ldo16_reg: LDO16 { regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -715,80 +700,69 @@ }; }; - ldo17_reg: ldo17 { - regulator-compatible = "LDO17"; + ldo17_reg: LDO17 { regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo18_reg: ldo18 { - regulator-compatible = "LDO18"; + ldo18_reg: LDO18 { regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo19_reg: ldo19 { - regulator-compatible = "LDO19"; + ldo19_reg: LDO19 { regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo20_reg: ldo20 { - regulator-compatible = "LDO20"; + ldo20_reg: LDO20 { regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo21_reg: ldo21 { - regulator-compatible = "LDO21"; + ldo21_reg: LDO21 { regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; - ldo22_reg: ldo22 { - regulator-compatible = "LDO22"; + ldo22_reg: LDO22 { regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - ldo23_reg: ldo23 { - regulator-compatible = "LDO23"; + ldo23_reg: LDO23 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo24_reg: ldo24 { - regulator-compatible = "LDO24"; + ldo24_reg: LDO24 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo25_reg: ldo25 { - regulator-compatible = "LDO25"; + ldo25_reg: LDO25 { regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - ldo26_reg: ldo26 { - regulator-compatible = "LDO26"; + ldo26_reg: LDO26 { regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - buck1_reg: buck1 { - regulator-compatible = "BUCK1"; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; @@ -799,8 +773,7 @@ }; }; - buck2_reg: buck2 { - regulator-compatible = "BUCK2"; + buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; @@ -811,8 +784,7 @@ }; }; - buck3_reg: buck3 { - regulator-compatible = "BUCK3"; + buck3_reg: BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -823,8 +795,7 @@ }; }; - buck4_reg: buck4 { - regulator-compatible = "BUCK4"; + buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -834,40 +805,35 @@ }; }; - buck5_reg: buck5 { - regulator-compatible = "BUCK5"; + buck5_reg: BUCK5 { regulator-name = "VMEM_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - buck6_reg: buck6 { - regulator-compatible = "BUCK6"; + buck6_reg: BUCK6 { regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - buck7_reg: buck7 { - regulator-compatible = "BUCK7"; + buck7_reg: BUCK7 { regulator-name = "VCC_SUB_2.0V"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; - buck8_reg: buck8 { - regulator-compatible = "BUCK8"; + buck8_reg: BUCK8 { regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - buck9_reg: buck9 { - regulator-compatible = "BUCK9"; + buck9_reg: BUCK9 { regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; @@ -1276,7 +1242,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; @@ -1303,7 +1269,7 @@ &spi_1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 0>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; s5c73m3_spi: s5c73m3 { diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index db3f65f3eb45..c000532c1444 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -129,10 +129,6 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -152,6 +148,10 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index c625e71217aa..0f5dcd418af8 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -89,14 +89,6 @@ pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; status = "okay"; -}; - -&ehci { - samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -116,6 +108,14 @@ }; }; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi new file mode 100644 index 000000000000..0a7f408824d8 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -0,0 +1,684 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/maxim,max77686.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/input/input.h> +#include "exynos5250.dtsi" + +/ { + aliases { + i2c104 = &i2c_104; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1: fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6: fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; + + sound { + samsung,i2s-controller = <&i2s0>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + keep-power-in-suspend; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc3_pwrseq>; +}; + +&pinctrl_0 { + wifi_en: wifi-en { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; +}; + +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts new file mode 100644 index 000000000000..f811dc800660 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -0,0 +1,47 @@ +/* + * Google Snow Rev 5+ board device tree source + * + * Copyright (c) 2012 Google, Inc + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5250-snow-common.dtsi" + +/ { + model = "Google Snow Rev 5+"; + compatible = "google,snow-rev5", "samsung,exynos5250", + "samsung,exynos5"; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,model = "Snow-I2S-MAX98090"; + samsung,audio-codec = <&max98090>; + }; +}; + +&i2c_7 { + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <4 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + +&pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 0720caab5511..995c7ce6c12b 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,698 +9,35 @@ */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/maxim,max77686.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/input/input.h> -#include "exynos5250.dtsi" +#include "exynos5250-snow-common.dtsi" / { model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5"; - - aliases { - i2c104 = &i2c_104; - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - bootargs = "console=tty1"; - stdout-path = "serial3:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq &lid_irq>; - - power { - label = "Power"; - gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - gpio-key,wakeup; - }; - - lid-switch { - label = "Lid"; - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - linux,input-type = <5>; /* EV_SW */ - linux,code = <0>; /* SW_LID */ - debounce-interval = <1>; - gpio-key,wakeup; - }; - }; - - vbat: vbat-fixed-regulator { - compatible = "regulator-fixed"; - regulator-name = "vbat-supply"; - regulator-boot-on; - }; - - i2c-arbitrator { - compatible = "i2c-arb-gpio-challenge"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&{/i2c@12CA0000}>; - - our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; - their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; - slew-delay-us = <10>; - wait-retry-us = <3000>; - wait-free-us = <50000>; - - pinctrl-names = "default"; - pinctrl-0 = <&arb_our_claim &arb_their_claim>; - - /* Use ID 104 as a hint that we're on physical bus 4 */ - i2c_104: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,poll-retry-count = <1>; - }; - - cros_ec: embedded-controller { - compatible = "google,cros-ec-i2c"; - reg = <0x1e>; - interrupts = <6 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_irq>; - wakeup-source; - }; - - power-regulator { - compatible = "ti,tps65090"; - reg = <0x48>; - - /* - * Config irq to disable internal pulls - * even though we run in polling mode. - */ - pinctrl-names = "default"; - pinctrl-0 = <&tps65090_irq>; - - vsys1-supply = <&vbat>; - vsys2-supply = <&vbat>; - vsys3-supply = <&vbat>; - infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; - vsys-l1-supply = <&vbat>; - vsys-l2-supply = <&vbat>; - - regulators { - dcdc1 { - ti,enable-ext-control; - }; - dcdc2 { - ti,enable-ext-control; - }; - dcdc3 { - ti,enable-ext-control; - }; - fet1: fet1 { - regulator-name = "vcd_led"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet2: fet2 { - regulator-name = "video_mid"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet3 { - regulator-name = "wwan_r"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet4 { - regulator-name = "sdcard"; - ti,overcurrent-wait = <3>; - }; - fet5 { - regulator-name = "camout"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet6: fet6 { - regulator-name = "lcd_vdd"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet7: fet7 { - regulator-name = "video_mid_1a"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - ldo1 { - }; - ldo2 { - }; - }; - - charger { - compatible = "ti,tps65090-charger"; - }; - }; - }; - }; + compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250", + "samsung,exynos5"; sound { compatible = "google,snow-audio-max98095"; samsung,model = "Snow-I2S-MAX98095"; - samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; - - usb3_vbus_reg: regulator-usb3 { - compatible = "regulator-fixed"; - regulator-name = "P5.0V_USB3CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_en>; - enable-active-high; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; - power-supply = <&fet1>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - }; - - panel: panel { - compatible = "auo,b116xw03"; - power-supply = <&fet6>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&bridge_out>; - }; - }; - }; - - mmc3_pwrseq: mmc3_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ - <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ - clocks = <&max77686 MAX77686_CLK_PMIC>; - clock-names = "ext_clock"; - }; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&dp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; -}; - -&ehci { - samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; - samsung,invert-vclk; -}; - -&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; -}; - -&i2c_0 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - max77686: max77686@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - wakeup-source; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.8V_LDO_OUT2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "P1.35V_BUCK_OUT6"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "P2.0V_BUCK_OUT7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "P2.85V_BUCK_OUT8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c_1 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; -}; - -/* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ -&i2c2_bus { - samsung,pin-pud = <0>; -}; - -&i2c_2 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; -}; - -&i2c_3 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_4 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_5 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; }; &i2c_7 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - ptn3460: lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; - edid-emulation = <5>; - - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - - port@1 { - bridge_in: endpoint { - remote-endpoint = <&dp_out>; - }; - }; - }; - }; - max98095: codec@11 { compatible = "maxim,max98095"; reg = <0x11>; - pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; + pinctrl-0 = <&max98095_en>; }; }; -&i2c_8 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; - cap-sd-highspeed; -}; - -/* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ -&mmc_3 { - status = "okay"; - num-slots = <1>; - broken-cd; - cap-sdio-irq; - keep-power-in-suspend; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; - bus-width = <4>; - cap-sd-highspeed; - mmc-pwrseq = <&mmc3_pwrseq>; -}; - &pinctrl_0 { - wifi_en: wifi-en { - samsung,pins = "gpx0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - wifi_rst: wifi-rst { - samsung,pins = "gpx0-2"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - power_key_irq: power-key-irq { - samsung,pins = "gpx1-3"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - max98095_en: max98095-en { samsung,pins = "gpx1-7"; samsung,pin-function = <0>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - lid_irq: lid-irq { - samsung,pins = "gpx3-5"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; -}; - -&pinctrl_1 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sd3_bus4 { - samsung,pin-drv = <0>; -}; - -&sd3_clk { - samsung,pin-drv = <0>; -}; - -&sd3_cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; -}; - -&spi_1 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; -}; - -&usbdrd_dwc3 { - dr_mode = "host"; -}; - -&usbdrd_phy { - vbus-supply = <&usb3_vbus_reg>; -}; - -#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b24610ea8c2a..88b9cf5f226f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -130,6 +130,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_ACLK200_DISP1_SUB>, + <&clock CLK_MOUT_ACLK300_DISP1_SUB>; + clock-names = "oscclk", "clk0", "clk1"; }; clock: clock-controller@10010000 { diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index eeb4ac22cfce..4ecef6981d5c 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> @@ -44,7 +45,7 @@ wakeup { label = "SW-TACT1"; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_WAKEUP>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1b95da79293c..72ba6f032ed7 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -153,7 +153,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x06>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { port@0 { @@ -930,7 +930,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; @@ -940,6 +940,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 98871f972c8a..ac35aefd320f 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -69,7 +70,7 @@ regulator-name = "VBUS0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg0 5 0>; + gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -80,7 +81,7 @@ regulator-name = "VBUS1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg1 4 0>; + gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -98,10 +99,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <4>; status = "okay"; -}; -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -118,9 +116,13 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index 000000000000..9493923ec652 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,61 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&hsi2c_5 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 3b43e57845ae..1af5bdc2bdb1 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -43,71 +43,7 @@ pinctrl-0 = <&emmc_nrst_pin>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 1>; - }; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; - - sound: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "Odroid-XU3"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speakers", "Speakers"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", - "Speakers", "SPKL", - "Speakers", "SPKR"; - - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; - - simple-audio-card,cpu { - sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; - }; - - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - }; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; }; fan0: pwm-fan { @@ -138,7 +74,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; @@ -160,6 +96,7 @@ s2mps11,buck2-ramp-enable = <1>; s2mps11,buck3-ramp-enable = <1>; s2mps11,buck4-ramp-enable = <1>; + samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; @@ -375,19 +312,6 @@ }; }; -&hsi2c_5 { - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -399,10 +323,6 @@ }; }; -&i2s0 { - status = "okay"; -}; - &mfc { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; @@ -463,18 +383,6 @@ }; }; -&pwm { - /* - * PWM 0 -- fan - * PWM 1 -- Green LED - * PWM 2 -- Blue LED - * PWM 3 -- on MIPI connector for backlight - */ - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; - pinctrl-names = "default"; - status = "okay"; -}; - &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; status = "okay"; @@ -510,9 +418,7 @@ dr_mode = "host"; }; -&usbdrd_dwc3_1 { - dr_mode = "otg"; -}; +/* usbdrd_dwc3_1 mode customized in each board */ &usbdrd3_0 { vdd33-supply = <&ldo9_reg>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c06882bbb822..b1b36081f343 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -13,8 +13,59 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 78e6a502f320..0c0bbdbfd85f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -12,10 +12,45 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; }; &i2c_0 { @@ -49,3 +84,19 @@ shunt-resistor = <10000>; }; }; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts new file mode 100644 index 000000000000..2faf88627a48 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -0,0 +1,48 @@ +/* + * Hardkernel Odroid XU4 board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU4"; + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm0_out &pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>, <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index e4443f4e6572..6a0d802e87c8 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5440.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; @@ -29,12 +30,12 @@ }; &pcie_0 { - reset-gpio = <&pin_ctrl 5 0>; + reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; &pcie_1 { - reset-gpio = <&pin_ctrl 22 0>; + reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 8f40c7e549bd..49a4f43e5ac2 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -147,7 +147,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; panel = <&panel>; }; @@ -893,7 +893,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; @@ -903,6 +903,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index fe623928f687..a579fbf13b5f 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -16,7 +16,8 @@ compatible = "hisilicon,hi3620-hi4511"; chosen { - bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + bootargs = "root=/dev/ram0"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 721b09238f58..d13af8437d10 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -15,7 +15,7 @@ compatible = "hisilicon,hix5hd2"; chosen { - bootargs = "console=ttyAMA0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; cpus { diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index b995333ea22b..1c6c07538a78 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -383,9 +383,11 @@ }; ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx23-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 15>; }; axi-ahb@8002e000 { diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 279249b8c3f3..e3ef94ac159f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -57,7 +57,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index e35cc6ba3ca6..8d04e57039bc 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -41,7 +41,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4e073e854742..c5b57d4adade 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -936,9 +936,11 @@ }; ocotp: ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 25>; }; axi-ahb@8002e000 { diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index c34f82581248..5fdb222636a7 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index e6540b5cfa4c..ed3dc3391d1c 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -29,7 +29,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 1b22512c91bd..27d763c7a307 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -33,7 +33,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p32", "m25p80"; + compatible = "m25p32", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index fc89ce1e5763..542ab9e697fb 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -76,7 +76,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; + compatible = "st,m25p32", "st,m25p", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 000000000000..e0161e46195c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33ccc4b3..8398f979b912 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -16,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index b13845c2823b..c3a14a4330a2 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de04479dc35..0f06ca5c9146 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 4fa254347798..364578d707a5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -109,7 +109,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 822ffb231c57..58adf176425a 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -145,7 +145,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,w25q256"; + compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 000000000000..d417457ca6db --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b2e97e..d1686339dc48 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -16,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 3c2852b16f78..90ea61ae04e9 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf032b"; + compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688be77c..66d10d8d534c 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index f4d6ae564ead..ecbc6eba6a2c 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -109,7 +109,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index a47a0399a172..7d81100e7d47 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -141,7 +141,7 @@ flash: m25p80@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 45e7c39e80d5..da1341d47b14 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -38,7 +38,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf040b", "m25p80"; + compatible = "sst,sst25vf040b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 000000000000..24d7d3f18464 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,630 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + rtc@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 000000000000..a35d54fd9cd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 340bc8e42650..caeed56b74a3 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -65,6 +95,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -124,7 +167,7 @@ mux-ext-port = <3>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -142,6 +185,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -182,7 +262,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -247,6 +327,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -258,6 +353,7 @@ fsl,pins = < /* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; @@ -354,6 +450,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -395,6 +524,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -418,9 +559,22 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; @@ -489,6 +643,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 9e6ecd99b472..d6d98d426384 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -12,7 +12,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { @@ -80,7 +80,7 @@ cs-gpios = <&gpio4 24 0>; flash@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -373,7 +373,7 @@ }; &pcie { - pinctrl-name = "default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio4 17 0>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index c37bb9ff9fac..8263fc18a7d9 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -133,7 +133,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index ce4c7313f509..1a69a3420ac8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -123,7 +153,7 @@ mux-ext-port = <4>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -141,6 +171,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -181,7 +248,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; @@ -348,6 +415,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -416,6 +516,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 2c07d3a86b61..a6d445c17779 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -158,7 +158,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e716e6f301c6..2b6cc8bf3c5c 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -218,16 +218,16 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>, - <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7"; + "rxtx7", "dma"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index b84dff2e94ea..be118820e9f7 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -126,7 +126,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 320a27f8889e..d8ba99f1d87b 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -135,8 +135,24 @@ ranges; spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", + "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>, + <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; }; ecspi1: ecspi@02008000 { @@ -670,8 +686,11 @@ }; dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index c76b87cba275..71005478cdf0 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -129,7 +129,7 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; @@ -137,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 0bfc4e7865b2..0ad164ab5729 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -130,7 +130,7 @@ flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <0>; }; @@ -138,7 +138,7 @@ flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <1>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index ac88c3467078..94ac4005d9cd 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -114,7 +114,7 @@ regulator-name = "peri_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index c94f2ea2316e..167f77b3bd43 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -211,7 +211,7 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6SX_CLK_SPDIF>, + clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, <&clks IMX6SX_CLK_OSC>, <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, <&clks 0>, diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 25746b122ea6..6aaa5ec3d846 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -87,6 +87,19 @@ }; }; +&snvs_poweroff { + status = "okay"; +}; + +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -277,6 +290,15 @@ >; }; + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 09edbedfd908..d00e994bdbd2 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -135,6 +135,11 @@ status = "disabled"; }; + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -424,6 +429,14 @@ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + status = "disabled"; + }; + snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; @@ -571,6 +584,17 @@ status = "disabled"; }; + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + usdhc1: usdhc@02190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; @@ -625,6 +649,11 @@ status = "disabled"; }; + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index a8d81497edb3..eeda78347619 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,6 +15,122 @@ * <mux_reg conf_reg input_reg mux_mode input_val> */ +#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX 0x0014 0x026C 0x0704 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX 0x0014 0x026C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x0014 0x026C 0x05E4 0x4 0x0 +#define MX7D_PAD_GPIO1_IO08__KPP_COL5 0x0014 0x026C 0x0608 0x6 0x0 +#define MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x0014 0x026C 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x0018 0x0270 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO09__SD1_LCTL 0x0018 0x0270 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3 0x0018 0x0270 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX 0x0018 0x0270 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX 0x0018 0x0270 0x0704 0x3 0x1 +#define MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x0018 0x0270 0x05E8 0x4 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY 0x0018 0x0270 0x04F4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO09__KPP_ROW5 0x0018 0x0270 0x0628 0x6 0x0 +#define MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x0018 0x0270 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x001C 0x0274 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO10__SD2_LCTL 0x001C 0x0274 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x001C 0x0274 0x0568 0x2 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS 0x001C 0x0274 0x0700 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS 0x001C 0x0274 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x001C 0x0274 0x05EC 0x4 0x0 +#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA 0x001C 0x0274 0x05A4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO10__KPP_COL6 0x001C 0x0274 0x060C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x001C 0x0274 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0020 0x0278 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO11__SD3_LCTL 0x0020 0x0278 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x0020 0x0278 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS 0x0020 0x0278 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS 0x0020 0x0278 0x0700 0x3 0x1 +#define MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x0020 0x0278 0x05F0 0x4 0x0 +#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB 0x0020 0x0278 0x05A8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO11__KPP_ROW6 0x0020 0x0278 0x062C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0020 0x0278 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0024 0x027C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x0024 0x027C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x0024 0x027C 0x0564 0x2 0x0 +#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0024 0x027C 0x04DC 0x3 0x0 +#define MX7D_PAD_GPIO1_IO12__CM4_NMI 0x0024 0x027C 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1 0x0024 0x027C 0x04E4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5 0x0024 0x027C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID 0x0024 0x027C 0x0734 0x7 0x0 +#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0028 0x0280 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT 0x0028 0x0280 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2 0x0028 0x0280 0x0570 0x2 0x0 +#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0028 0x0280 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY 0x0028 0x0280 0x04F4 0x4 0x1 +#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2 0x0028 0x0280 0x04E8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL 0x0028 0x0280 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID 0x0028 0x0280 0x0730 0x7 0x0 +#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x002C 0x0284 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO14__SD3_CD_B 0x002C 0x0284 0x0738 0x1 0x0 +#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO 0x002C 0x0284 0x0574 0x2 0x0 +#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x002C 0x0284 0x04E0 0x3 0x0 +#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B 0x002C 0x0284 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3 0x002C 0x0284 0x04EC 0x5 0x0 +#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0 0x002C 0x0284 0x06D8 0x6 0x0 +#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x0030 0x0288 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO15__SD3_WP 0x0030 0x0288 0x073C 0x1 0x0 +#define MX7D_PAD_GPIO1_IO15__ENET2_MDC 0x0030 0x0288 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0030 0x0288 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B 0x0030 0x0288 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4 0x0030 0x0288 0x04F0 0x5 0x0 +#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1 0x0030 0x0288 0x06DC 0x6 0x0 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 @@ -453,7 +569,7 @@ #define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 #define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 #define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 -#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x06F4 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 #define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 @@ -469,7 +585,7 @@ #define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 #define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 #define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 -#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 #define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 @@ -501,7 +617,7 @@ #define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 #define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 #define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 -#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0700 0x0 0x2 #define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 #define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 #define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index fdd1d7c9a5cc..432aaf5d5ef7 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -101,6 +101,45 @@ arm-supply = <&sw1a_reg>; }; +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -231,6 +270,17 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -241,11 +291,60 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 @@ -281,7 +380,6 @@ >; }; - pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6e444bb873f9..ebc053a06405 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -446,6 +446,12 @@ status = "disabled"; }; + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + gpt1: gpt@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; @@ -570,6 +576,58 @@ }; }; + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + aips3: aips-bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -694,6 +752,77 @@ status = "disabled"; }; + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + }; + usdhc1: usdhc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; @@ -729,6 +858,42 @@ bus-width = <4>; status = "disabled"; }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 50c83c21d911..b7e99807f5c2 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -13,7 +13,7 @@ #include "k2e.dtsi" / { - compatible = "ti,k2e-evm","ti,keystone"; + compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison EVM"; soc { diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi index b13b3c94e7fc..ac990f679725 100644 --- a/arch/arm/boot/dts/k2e-netcp.dtsi +++ b/arch/arm/boot/dts/k2e-netcp.dtsi @@ -72,7 +72,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +93,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 675fb8e492c6..1097dada56d2 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2e", "ti,keystone"; + model = "Texas Instruments Keystone 2 Edison SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 660ebf58d547..8161bf53271b 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -13,7 +13,7 @@ #include "k2hk.dtsi" / { - compatible = "ti,k2hk-evm","ti,keystone"; + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; soc { diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi index 77a32c3c17e4..f86d6ddb832b 100644 --- a/arch/arm/boot/dts/k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/k2hk-netcp.dtsi @@ -47,6 +47,7 @@ qmss: qmss@2a40000 { "region", "push", "pop"; }; }; + queue-pools { qpend { qpend-0 { @@ -88,7 +89,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -99,6 +110,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index d0810a5f2968..ada4c7ac96e7 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2hk", "ti,keystone"; + model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 9a69a6b55374..00861244d788 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -13,7 +13,7 @@ #include "k2l.dtsi" / { - compatible = "ti,k2l-evm","ti,keystone"; + compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr EVM"; soc { diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi index 6b95284d11d4..01aef230773d 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -72,7 +72,16 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +92,20 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; + }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 49fd414f680c..4446da72b0ae 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2l", "ti,keystone"; + model = "Texas Instruments Keystone 2 Lamarr SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 72816d65f7ec..3f272826f537 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -12,6 +12,7 @@ #include "skeleton.dtsi" / { + compatible = "ti,keystone"; model = "Texas Instruments Keystone 2 SoC"; #address-cells = <2>; #size-cells = <2>; @@ -136,7 +137,7 @@ }; spi0: spi@21000400 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000400 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -147,7 +148,7 @@ }; spi1: spi@21000600 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000600 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -158,7 +159,7 @@ }; spi2: spi@21000800 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000800 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 464f09a1a4a5..7b5a4a18f49c 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,16 +40,6 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - cesa: crypto@0301 { - compatible = "marvell,orion-crypto"; - reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, - <MBUS_ID(0x03, 0x01) 0 0x800>; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; - }; - nand: nand@012f { #address-cells = <1>; #size-cells = <1>; @@ -65,6 +55,14 @@ pinctrl-names = "default"; status = "disabled"; }; + + crypto_sram: sa-sram@0301 { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x03, 0x01) 0x0 0x800>; + clocks = <&gate_clk 17>; + #address-cells = <1>; + #size-cells = <1>; + }; }; ocp@f1000000 { @@ -252,6 +250,17 @@ status = "okay"; }; + cesa: crypto@30000 { + compatible = "marvell,kirkwood-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; + interrupts = <22>; + clocks = <&gate_clk 17>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 2c569a6ddc9a..52591d83e8cd 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -68,6 +68,46 @@ }; soc { + sct_pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + resets = <&rgu 37>; + #pwm-cells = <3>; + status = "disabled"; + }; + + dmac: dma-controller@40002000 { + compatible = "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x40002000 0x1000>; + interrupts = <2>; + clocks = <&ccu1 CLK_CPU_DMA>; + clock-names = "apb_pclk"; + resets = <&rgu 19>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + }; + + spifi: flash-controller@40003000 { + compatible = "nxp,lpc1773-spifi"; + reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; + reg-names = "spifi", "flash"; + interrupts = <30>; + clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; + clock-names = "spifi", "reg"; + resets = <&rgu 53>; + status = "disabled"; + }; + mmcsd: mmcsd@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; @@ -75,6 +115,7 @@ num-slots = <1>; clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; clock-names = "ciu", "biu"; + resets = <&rgu 20>; status = "disabled"; }; @@ -83,6 +124,7 @@ reg = <0x40006100 0x100>; interrupts = <8>; clocks = <&ccu1 CLK_CPU_USB0>; + resets = <&rgu 17>; phys = <&usb0_otg_phy>; phy-names = "usb"; has-transaction-translator; @@ -94,6 +136,7 @@ reg = <0x40007100 0x100>; interrupts = <9>; clocks = <&ccu1 CLK_CPU_USB1>; + resets = <&rgu 18>; status = "disabled"; }; @@ -102,6 +145,7 @@ reg = <0x40005000 0x1000>; clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; clock-names = "mpmcclk", "apb_pclk"; + resets = <&rgu 21>; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x1c000000 0x1000000 @@ -118,6 +162,7 @@ interrupt-names = "combined"; clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; clock-names = "clcdclk", "apb_pclk"; + resets = <&rgu 16>; status = "disabled"; }; @@ -128,6 +173,8 @@ interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -135,12 +182,20 @@ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; clocks = <&ccu1 CLK_CPU_CREG>; + resets = <&rgu 5>; usb0_otg_phy: phy@004 { compatible = "nxp,lpc1850-usb-otg-phy"; clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; + + dmamux: dma-mux@11c { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; + }; }; cgu: clock-controller@40050000 { @@ -178,6 +233,22 @@ "base_ssp0_clk", "base_sdio_clk"; }; + rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + + watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + interrupts = <49>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + }; + uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; @@ -185,6 +256,12 @@ interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; + resets = <&rgu 44>; + dmas = <&dmamux 1 1 2 + &dmamux 2 1 2 + &dmamux 11 2 2 + &dmamux 12 2 2>; + dma-names = "tx", "rx", "tx", "rx"; status = "disabled"; }; @@ -195,6 +272,10 @@ interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; + resets = <&rgu 45>; + dmas = <&dmamux 3 1 2 + &dmamux 4 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -204,6 +285,10 @@ interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 50>; + dmas = <&dmamux 9 0 2 + &dmamux 10 0 2>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -215,6 +300,7 @@ interrupts = <12>; clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; + resets = <&rgu 32>; }; timer1: timer@40085000 { @@ -223,6 +309,7 @@ interrupts = <13>; clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; + resets = <&rgu 33>; }; pinctrl: pinctrl@40086000 { @@ -231,11 +318,23 @@ clocks = <&ccu1 CLK_CPU_SCU>; }; + i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + resets = <&rgu 48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + can1: can@400a4000 { compatible = "bosch,c_can"; reg = <0x400a4000 0x1000>; interrupts = <43>; clocks = <&ccu1 CLK_APB1_CAN1>; + resets = <&rgu 54>; status = "disabled"; }; @@ -246,6 +345,10 @@ interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; + resets = <&rgu 46>; + dmas = <&dmamux 5 1 2 + &dmamux 6 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -256,6 +359,12 @@ interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; + resets = <&rgu 47>; + dmas = <&dmamux 7 1 2 + &dmamux 8 1 2 + &dmamux 13 3 2 + &dmamux 14 3 2>; + dma-names = "tx", "rx", "rx", "tx"; status = "disabled"; }; @@ -265,6 +374,7 @@ interrupts = <14>; clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; + resets = <&rgu 34>; }; timer3: timer@400c4000 { @@ -273,6 +383,7 @@ interrupts = <15>; clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; + resets = <&rgu 35>; }; ssp1: spi@400c5000 { @@ -281,6 +392,28 @@ interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 51>; + dmas = <&dmamux 11 2 2 + &dmamux 12 2 2 + &dmamux 3 3 2 + &dmamux 4 3 2 + &dmamux 5 2 2 + &dmamux 6 2 2 + &dmamux 13 2 2 + &dmamux 14 2 2>; + dma-names = "rx", "tx", "tx", "rx", + "tx", "rx", "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@400e0000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400e0000 0x1000>; + interrupts = <19>; + clocks = <&ccu1 CLK_APB3_I2C1>; + resets = <&rgu 49>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -291,6 +424,7 @@ reg = <0x400e2000 0x1000>; interrupts = <51>; clocks = <&ccu1 CLK_APB3_CAN0>; + resets = <&rgu 55>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 32bc7ff4eb2a..022d495432c1 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -15,6 +15,9 @@ #include "lpc18xx.dtsi" #include "lpc4350.dtsi" +#include "dt-bindings/input/input.h" +#include "dt-bindings/gpio/gpio.h" + / { model = "Hitex LPC4350 Evaluation Board"; compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; @@ -34,6 +37,88 @@ device_type = "memory"; reg = <0x28000000 0x800000>; /* 8 MB */ }; + + pca_buttons { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + + button@0 { + label = "joy:right"; + linux,code = <KEY_RIGHT>; + gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "joy:up"; + linux,code = <KEY_UP>; + gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; + }; + + + button@2 { + label = "joy:enter"; + linux,code = <KEY_ENTER>; + gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "joy:left"; + linux,code = <KEY_LEFT>; + gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; + }; + + button@4 { + label = "joy:down"; + linux,code = <KEY_DOWN>; + gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; + }; + + button@5 { + label = "user:sw3"; + linux,code = <KEY_F1>; + gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; + }; + + button@6 { + label = "user:sw4"; + linux,code = <KEY_F2>; + gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; + }; + + button@7 { + label = "user:sw5"; + linux,code = <KEY_F3>; + gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + pca_leds { + compatible = "gpio-leds"; + + led0 { + label = "ext:led0"; + gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "ext:led1"; + gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>; + }; + + led2 { + label = "ext:led2"; + gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "ext:led3"; + gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; + }; + }; }; &pinctrl { @@ -186,6 +271,43 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -271,6 +393,31 @@ clock-frequency = <25000000>; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + /* NXP SE97BTP with temperature sensor + eeprom */ + sensor@18 { + compatible = "nxp,jc42"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + }; + + pca_gpio: gpio@24 { + compatible = "nxp,pca9673"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mac { status = "okay"; phy-mode = "mii"; @@ -278,6 +425,34 @@ pinctrl-0 = <&enet_mii_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x040000>; /* 256 KiB */ + }; + + partition@1 { + label = "kernel"; + reg = <0x040000 0x2c0000>; /* 2.75 MiB */ + }; + + partition@2 { + label = "rootfs"; + reg = <0x300000 0x500000>; /* 5 MiB */ + }; + }; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 5f7bdad80963..391121d24daa 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -332,6 +332,14 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + sdmmc_pins: sdmmc-pins { sdmmc_clk_cfg { pins = "pc_0"; @@ -363,6 +371,49 @@ }; }; + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <0>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + + ssp0_pins: ssp0-pins { + ssp0_sck_miso_mosi { + pins = "pf_0", "pf_2", "pf_3"; + function = "ssp0"; + slew-rate = <1>; + bias-pull-down; + input-enable; + input-schmitt-disable; + }; + + ssp0_ssel { + pins = "pf_1"; + function = "ssp0"; + bias-pull-up; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -410,6 +461,23 @@ }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; + + eeprom@57 { + compatible = "microchip,24c64"; + reg = <0x57>; + }; +}; + &emc { status = "okay"; pinctrl-names = "default"; @@ -489,6 +557,33 @@ pinctrl-0 = <&sdmmc_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "data"; + reg = <0 0x200000>; + }; + }; +}; + +&ssp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_pins>; + num-cs = <1>; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index e008f9367510..fbb89d13401e 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -144,6 +144,19 @@ &i2c0 { status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; &i2c1 { diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 973a496207fc..9430a9928199 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -53,6 +53,7 @@ interrupt-parent = <&gic>; aliases { + crypto = &crypto; ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; @@ -148,6 +149,45 @@ big-endian; }; + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <7>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1700000 0x0 0x100000>; + ranges = <0x0 0x0 0x1700000 0x100000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + }; + + }; + clockgen: clocking@1ee1000 { #address-cells = <1>; #size-cells = <1>; @@ -405,6 +445,7 @@ model = "eTSEC"; fsl,magic-packet; ranges; + dma-coherent; queue-group@2d10000 { #address-cells = <2>; @@ -433,6 +474,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d50000 { #address-cells = <2>; @@ -461,6 +503,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d90000 { #address-cells = <2>; @@ -494,6 +537,7 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; }; }; }; diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts new file mode 100644 index 000000000000..c7fdaeabbe7b --- /dev/null +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "TRONFY MXQ S805"; + compatible = "tronfy,mxq", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts new file mode 100644 index 000000000000..a8e2911b2cbe --- /dev/null +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "Hardkernel ODROID-C1"; + compatible = "hardkernel,odroid-c1", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi new file mode 100644 index 000000000000..ee352bf687ff --- /dev/null +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -0,0 +1,186 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/meson8b-clkc.h> +#include <dt-bindings/gpio/meson8b-gpio.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x201>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x202>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x203>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: l2-cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x18>; + interrupts = <0 10 1>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x18>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_A: serial@c11084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_B: serial@c11084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_C: serial@c1108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + clkc: clock-controller@c1104000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + }; + + pinctrl: pinctrl@c1109880 { + compatible = "amlogic,meson8b-pinctrl"; + reg = <0xc1109880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@c11080b0 { + reg = <0xc11080b0 0x28>, + <0xc11080e8 0x18>, + <0xc1108120 0x18>, + <0xc1108030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + }; +}; /* end of / */ diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index ca3402e8240b..52086c8018e2 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -47,6 +48,17 @@ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -72,6 +84,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 357a91fc2d1d..460db6d05952 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -32,7 +32,6 @@ compatible = "mediatek,mt6397-regulator"; mt6397_vpca15_reg: buck_vpca15 { - regulator-compatible = "buck_vpca15"; regulator-name = "vpca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -41,7 +40,6 @@ }; mt6397_vpca7_reg: buck_vpca7 { - regulator-compatible = "buck_vpca7"; regulator-name = "vpca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -50,7 +48,6 @@ }; mt6397_vsramca15_reg: buck_vsramca15 { - regulator-compatible = "buck_vsramca15"; regulator-name = "vsramca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -59,7 +56,6 @@ }; mt6397_vsramca7_reg: buck_vsramca7 { - regulator-compatible = "buck_vsramca7"; regulator-name = "vsramca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -68,7 +64,6 @@ }; mt6397_vcore_reg: buck_vcore { - regulator-compatible = "buck_vcore"; regulator-name = "vcore"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -77,7 +72,6 @@ }; mt6397_vgpu_reg: buck_vgpu { - regulator-compatible = "buck_vgpu"; regulator-name = "vgpu"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -86,7 +80,6 @@ }; mt6397_vdrm_reg: buck_vdrm { - regulator-compatible = "buck_vdrm"; regulator-name = "vdrm"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; @@ -95,7 +88,6 @@ }; mt6397_vio18_reg: buck_vio18 { - regulator-compatible = "buck_vio18"; regulator-name = "vio18"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; @@ -104,19 +96,16 @@ }; mt6397_vtcxo_reg: ldo_vtcxo { - regulator-compatible = "ldo_vtcxo"; regulator-name = "vtcxo"; regulator-always-on; }; mt6397_va28_reg: ldo_va28 { - regulator-compatible = "ldo_va28"; regulator-name = "va28"; regulator-always-on; }; mt6397_vcama_reg: ldo_vcama { - regulator-compatible = "ldo_vcama"; regulator-name = "vcama"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <2800000>; @@ -124,18 +113,15 @@ }; mt6397_vio28_reg: ldo_vio28 { - regulator-compatible = "ldo_vio28"; regulator-name = "vio28"; regulator-always-on; }; mt6397_vusb_reg: ldo_vusb { - regulator-compatible = "ldo_vusb"; regulator-name = "vusb"; }; mt6397_vmc_reg: ldo_vmc { - regulator-compatible = "ldo_vmc"; regulator-name = "vmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -143,7 +129,6 @@ }; mt6397_vmch_reg: ldo_vmch { - regulator-compatible = "ldo_vmch"; regulator-name = "vmch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -151,7 +136,6 @@ }; mt6397_vemc_3v3_reg: ldo_vemc3v3 { - regulator-compatible = "ldo_vemc3v3"; regulator-name = "vemc_3v3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -159,7 +143,6 @@ }; mt6397_vgp1_reg: ldo_vgp1 { - regulator-compatible = "ldo_vgp1"; regulator-name = "vcamd"; regulator-min-microvolt = <1220000>; regulator-max-microvolt = <3300000>; @@ -167,7 +150,6 @@ }; mt6397_vgp2_reg: ldo_vgp2 { - regulator-compatible = "ldo_vgp2"; regulator-name = "vcamio"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; @@ -175,7 +157,6 @@ }; mt6397_vgp3_reg: ldo_vgp3 { - regulator-compatible = "ldo_vgp3"; regulator-name = "vcamaf"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -183,7 +164,6 @@ }; mt6397_vgp4_reg: ldo_vgp4 { - regulator-compatible = "ldo_vgp4"; regulator-name = "vgp4"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -191,7 +171,6 @@ }; mt6397_vgp5_reg: ldo_vgp5 { - regulator-compatible = "ldo_vgp5"; regulator-name = "vgp5"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; @@ -199,7 +178,6 @@ }; mt6397_vgp6_reg: ldo_vgp6 { - regulator-compatible = "ldo_vgp6"; regulator-name = "vgp6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -207,7 +185,6 @@ }; mt6397_vibr_reg: ldo_vibr { - regulator-compatible = "ldo_vibr"; regulator-name = "vibr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 08371dbae543..cb99b02d2ccc 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -46,6 +46,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu0: cpu@0 { device_type = "cpu"; @@ -72,6 +73,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -97,6 +109,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 390c91aea16d..ee5a0bb22354 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -16,7 +16,7 @@ cpus { cpu@0 { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index c9f1e93a95ae..8491f46c61b7 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -9,9 +9,9 @@ ocp { i2c@0 { compatible = "i2c-cbus-gpio"; - gpios = <&gpio3 2 0 /* gpio66 clk */ - &gpio3 1 0 /* gpio65 dat */ - &gpio3 0 0 /* gpio64 sel */ + gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ + &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */ + &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */ >; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 7c4dca122a91..73f1e3a8f62c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -80,7 +80,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 67659a0ed13e..274c2c482aaa 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -55,7 +55,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 4d091ca43e25..8c813e77b17f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -224,7 +224,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 0>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index e84184de2a4a..4813e96157b3 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 0>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index b2589f96d5f7..090475083c2f 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -26,7 +26,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio5 22 0>; /* gpio150 */ + gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ startup-delay-us = <70000>; enable-active-high; vin-supply = <&vmmc2>; @@ -91,7 +91,7 @@ tsc2046@0 { interrupt-parent = <&gpio6>; interrupts = <15 0>; /* gpio175 */ - pendown-gpio = <&gpio6 15 0>; + pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7166d8876ea8..e14d15e5abc8 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -77,10 +77,10 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_gpio_pins>; - gpio-sck = <&gpio1 12 0>; - gpio-miso = <&gpio1 18 0>; - gpio-mosi = <&gpio1 20 0>; - cs-gpios = <&gpio1 19 0>; + gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; /* lcd panel */ @@ -118,7 +118,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 0>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index 52b386f6865b..600b6ca5a1bd 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -12,6 +12,6 @@ model = "Goldelico GTA04A5"; sound { - ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ }; }; diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2230e1c03320..3caf062f882c 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,7 +1,7 @@ /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -35,60 +35,60 @@ &omap3_pmx_core { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ - 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ - 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ - 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ - 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; }; @@ -155,7 +155,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { - }; + }; }; }; }; @@ -175,11 +175,11 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; }; &mmc3 { @@ -187,13 +187,13 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; }; &twl_gpio { diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 5ad688c57a00..d90f12c39307 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -111,40 +111,40 @@ tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 72f7cdc091fb..321c2b7a4e9f 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index fea7f7edb45d..3835e1569c29 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify @@ -45,15 +45,6 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ >; }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - >; - }; }; /* On board Wifi module */ diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 0cb1527c39d4..640f06603966 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEP COM MODULE * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index b899e341874a..76dc08868bfb 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * - * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2014 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 8150f47ccdf5..468608dab30a 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk> + * Copyright (C) 2012 Javier Martinez Canillas <javier@osg.samsung.com> * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com> * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index bd6e6769c7ce..d2fab8c0d4f8 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -200,7 +200,7 @@ tsc2046@0 { interrupt-parent = <&gpio2>; interrupts = <22 0>; /* gpio54 */ - pendown-gpio = <&gpio2 22 0>; + pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index d0dd0365bfda..57d7c93cc72b 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -284,7 +284,7 @@ }; &mmc1 { - cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; cd-inverted; vmmc-supply = <&vmmc1>; bus-width = <4>; @@ -314,7 +314,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 0>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index 834f7c65f62d..0e3c9812f4e3 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -114,8 +114,8 @@ status = "okay"; bus-width = <4>; vmmc-supply = <&vmmc1>; - cd-gpios = <&gpio6 4 0>; /* gpio_164 */ - wp-gpios = <&gpio6 3 0>; /* gpio_163 */ + cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */ + wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; ti,dual-volt; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 800b379d368d..e9ee1df0e467 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -27,7 +27,7 @@ regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - gpio = <&gpio5 29 0>; /* gpio line 157 */ + gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ startup-delay-us = <150>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 28430f1596f2..a29ad16cc9bb 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -35,7 +35,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */ + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 80d236ac64a5..b09cedf66117 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -152,7 +152,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 048fd216970a..5f979590571b 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -163,7 +163,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index f2084e6d01e7..cfe140c657e7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -218,7 +218,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio6 4 0>; /* GPIO_164 */ + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; /* wg7210 (wifi+bt module) 32k clock buffer */ @@ -607,7 +607,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 0>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 0>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 7bd8d9a4f67f..ae5dbbd9d569 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -37,7 +37,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; @@ -225,7 +225,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - cd-gpios = <&twl_gpio 0 0>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 131448d86e67..7bc5fdd6981e 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -44,7 +44,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio4 5 0>; /* gpio101 */ + gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f1507bc8737e..18d096696fc0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -68,7 +68,7 @@ regulator-name = "hsusb1_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 1 0>; /* gpio_1 */ + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ startup-delay-us = <70000>; enable-active-high; /* @@ -98,7 +98,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dac86ed7481f..f0bdc41f8eff 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -30,7 +30,7 @@ regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 16 0>; /* gpio line 48 */ + gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ enable-active-high; regulator-boot-on; }; @@ -155,7 +155,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 22 0>; + gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; @@ -374,7 +374,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 9bceeb7e1f03..1c5f6f35e1cf 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -15,7 +15,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; /* gpio 43 */ + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index a4f1ba2e1903..49d032b846be 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -196,7 +196,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 194f9ef0a009..5fa68f191af7 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -46,7 +46,7 @@ 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ - gpios = <&gpio3 22 0>; /* tshut */ + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */ #thermal-sensor-cells = <0>; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi new file mode 100644 index 000000000000..5cf76a1c5c75 --- /dev/null +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -0,0 +1,655 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap5.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + aliases { + display0 = &hdmi0; + }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ + clocks = <&auxclk1_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + /* gpios defined in the board specific dts */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_pins + &led_gpio_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + >; + }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; +}; + +&omap5_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_wkup_pins + >; + + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + pinctrl-single,pins = < + 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + >; + }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; + interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x168>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + ti,smps-range = <0x80>; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ + regulator-name = "ldo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; + }; + + ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + palmas_power_button: palmas_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>; + clock-names = "clk32k"; + }; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + /* vdda-supply populated in board specific dts file */ + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 61ad2ea34720..3774b37be6c8 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -344,7 +344,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 0>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts new file mode 100644 index 000000000000..46ecb1dd3b5c --- /dev/null +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap5-board-common.dtsi" + +/ { + model = "IGEPv5"; + compatible = "isee,omap5-igep0050", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7f000000>; /* 2032 MB */ + }; +}; + +&hdmi { + vdda-supply = <&ldo7_reg>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + tca6416: tca6416@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ + >; + }; +}; + +&tpd12s015 { + gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */ + <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/ + <&gpio7 1 0>, /* 193, HPD */ + <&gpio7 2 0>, /* 194, SCL */ + <&gpio7 3 0>; /* 195, SDA */ +}; + diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3cb030f9d2c4..05b1c1ebded8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -7,9 +7,7 @@ */ /dts-v1/; -#include "omap5.dtsi" -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "omap5-board-common.dtsi" / { model = "TI OMAP5 uEVM board"; @@ -19,523 +17,10 @@ device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; - - aliases { - display0 = &hdmi0; - }; - - vmmcsd_fixed: fixedregulator-mmcsd { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ - clocks = <&auxclk1_ck>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - }; - - /* HS USB Host PHY on PORT 3 */ - hsusb3_phy: hsusb3_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ - }; - - leds { - compatible = "gpio-leds"; - led@1 { - label = "omap5:blue:usr1"; - gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - tpd12s015: encoder@0 { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ - <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ - <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector@0 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "b"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "omap5-uevm"; - - ti,mclk-freq = <19200000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap5_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_pins - &led_gpio_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ - 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ - 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ - 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ - 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ - 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ - 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ - 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ - 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ - 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ - >; - }; - - mcspi3_pins: pinmux_mcspi3_pins { - pinctrl-single,pins = < - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ - >; - }; - - mcspi4_pins: pinmux_mcspi4_pins { - pinctrl-single,pins = < - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ - >; - }; - - usbhost_pins: pinmux_usbhost_pins { - pinctrl-single,pins = < - 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ - 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ - - 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ - 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ - - 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ - 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ - >; - }; - - led_gpio_pins: pinmux_led_gpio_pins { - pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ - 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ - 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ - >; - }; - - uart5_pins: pinmux_uart5_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ - 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ - 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ - 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ - 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ - >; - }; -}; - -&omap5_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_wkup_pins - >; - - usbhost_wkup_pins: pinmux_usbhost_wkup_pins { - pinctrl-single,pins = < - 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&ldo9_reg>; - bus-width = <4>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - bus-width = <4>; - ti,non-removable; -}; - -&mmc4 { - status = "disabled"; }; -&mmc5 { - status = "disabled"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; - - palmas: palmas@48 { - compatible = "ti,palmas"; - interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - reg = <0x48>; - interrupt-controller; - #interrupt-cells = <2>; - ti,system-power-controller; - - extcon_usb3: palmas_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - ti,enable-id-detection; - ti,wakeup; - }; - - clk32kgaudio: palmas_clk32k@1 { - compatible = "ti,palmas-clk32kgaudio"; - #clock-cells = <0>; - }; - - palmas_pmic { - compatible = "ti,palmas-pmic"; - interrupt-parent = <&palmas>; - interrupts = <14 IRQ_TYPE_NONE>; - interrupt-name = "short-irq"; - - ti,ldo6-vibrator; - - regulators { - smps123_reg: smps123 { - /* VDD_OPP_MPU */ - regulator-name = "smps123"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_OPP_MM */ - regulator-name = "smps45"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_DDR3 - over VDD_SMPS6 */ - regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - smps7_reg: smps7 { - /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ - regulator-name = "smps7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps8_reg: smps8 { - /* VDD_OPP_CORE */ - regulator-name = "smps8"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps9_reg: smps9 { - /* VDDA_2v1_AUD over VDD_2v1 */ - regulator-name = "smps9"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - ti,smps-range = <0x80>; - }; - - smps10_out2_reg: smps10_out2 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - smps10_out1_reg: smps10_out1 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - ldo1_reg: ldo1 { - /* VDDAPHY_CAM: vdda_csiport */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2_reg: ldo2 { - /* VCC_2V8_DISP: Does not go anywhere */ - regulator-name = "ldo2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - /* Unused */ - status = "disabled"; - }; - - ldo3_reg: ldo3 { - /* VDDAPHY_MDM: vdda_lli */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - /* Only if Modem is used */ - status = "disabled"; - }; - - ldo4_reg: ldo4 { - /* VDDAPHY_DISP: vdda_dsiport/hdmi */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PHY: usb/sata/hdmi.. */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: ldo6 { - /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ - regulator-name = "ldo6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo7_reg: ldo7 { - /* VDD_VPP: vpp1 */ - regulator-name = "ldo7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - /* Only for efuse reprograming! */ - status = "disabled"; - }; - - ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ - regulator-name = "ldo8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - /* Unused */ - status = "disabled"; - }; - - ldo9_reg: ldo9 { - /* VCC_DV_SDIO: vdds_sdcard */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3250000>; - regulator-max-microvolt = <3250000>; - regulator-always-on; - regulator-boot-on; - }; - - regen3_reg: regen3 { - /* REGEN3 controls LDO9 supply to card */ - regulator-name = "regen3"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - palmas_power_button: palmas_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&palmas>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - - pinctrl-names = "default"; - pinctrl-0 = <&twl6040_pins>; - - interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ - - vio-supply = <&smps7_reg>; - v2v1-supply = <&smps9_reg>; - enable-active-high; - - clocks = <&clk32kgaudio>; - clock-names = "clk32k"; - }; +&hdmi { + vdda-supply = <&ldo4_reg>; }; &i2c5 { @@ -552,92 +37,17 @@ }; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - status = "okay"; -}; - -&mcbsp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp1_pins>; - status = "okay"; -}; - -&mcbsp2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; -}; - -&usbhshost { - port2-mode = "ehci-hsic"; - port3-mode = "ehci-hsic"; -}; - -&usbhsehci { - phys = <0 &hsusb2_phy &hsusb3_phy>; -}; - -&usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; -}; - -&mcspi1 { - -}; - -&mcspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; -}; - -&mcspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi3_pins>; -}; - -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&omap5_pmx_core 0x19c>; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; -}; - -&cpu0 { - cpu0-supply = <&smps123_reg>; -}; - -&dss { - status = "ok"; +&omap5_pmx_core { + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + >; + }; }; -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; +&tpd12s015 { + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 75cd01bd6024..e1b6d2a2ac49 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -212,6 +212,16 @@ status = "disabled"; }; + cesa: crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <28>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + ehci1: ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; @@ -220,13 +230,11 @@ }; }; - cesa: crypto@90000 { - compatible = "marvell,orion-crypto"; - reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, - <MBUS_ID(0x09, 0x00) 0x0 0x800>; - reg-names = "regs", "sram"; - interrupts = <28>; - status = "okay"; + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 47c0282bdfca..03784f1366e5 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -1,4 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "CompuLab CM-QS600"; @@ -12,12 +14,27 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + soc { pinctrl@800000 { - i2c1_pins: i2c1 { + card_detect: card_detect { mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; + pins = "gpio26"; + function = "gpio"; + bias-disable; }; }; }; @@ -96,10 +113,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@50 { + eeprom@50 { compatible = "24c02"; reg = <0x50>; pagesize = <32>; @@ -112,6 +127,8 @@ qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; @@ -163,6 +180,21 @@ regulator-always-on; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -175,12 +207,16 @@ sdcc3: sdcc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f3100da082b2..11ac608b6d50 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> / { model = "Qualcomm APQ8064/IFC6410"; @@ -14,6 +15,29 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -119,8 +143,6 @@ qcom,mode = <GSBI_PROT_I2C>; i2c3: i2c@16280000 { status = "okay"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; }; }; @@ -131,10 +153,8 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - eeprom: eeprom@52 { + eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; pagesize = <32>; @@ -148,9 +168,8 @@ serial@16540000 { status = "ok"; - pinctrl-names = "default"; - pinctrl-0 = <&uart_pins>; + pinctrl-0 = <&gsbi6_uart_4pins>; }; }; @@ -159,6 +178,8 @@ qcom,mode = <GSBI_PROT_I2C_UART>; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; @@ -210,6 +231,30 @@ status = "okay"; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -231,6 +276,7 @@ status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d2e94d647c27..a4c1762b53ea 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -127,12 +127,33 @@ }; }; - uart_pins: uart_pins { + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { mux { pins = "gpio14", "gpio15", "gpio16", "gpio17"; function = "gsbi6"; }; }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -213,6 +234,8 @@ i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -258,6 +281,8 @@ ranges; i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; reg = <0x16280000 0x1000>; interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; clocks = <&gcc GSBI3_QUP_CLK>, @@ -361,6 +386,22 @@ <136 1>, <137 1>, <138 1>, <139 1>; }; + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0554fbd72c40..fcffecae3e67 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -221,6 +221,7 @@ compatible = "qcom,gcc-apq8084"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 93e315053bdd..753bdfddd46e 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -123,6 +123,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -237,6 +242,7 @@ compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; @@ -249,6 +255,7 @@ compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfd8c0000 0x6000>; }; @@ -313,7 +320,7 @@ }; blsp_i2c11: i2c@f9967000 { - status = "disable"; + status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; interrupts = <0 105 IRQ_TYPE_NONE>; @@ -339,4 +346,73 @@ #interrupt-cells = <4>; }; }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 {}; + pm8841_s2: s2 {}; + pm8841_s3: s3 {}; + pm8841_s4: s4 {}; + pm8841_s5: s5 {}; + pm8841_s6: s6 {}; + pm8841_s7: s7 {}; + pm8841_s8: s8 {}; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 {}; + pm8941_s2: s2 {}; + pm8941_s3: s3 {}; + pm8941_5v: s4 {}; + + pm8941_l1: l1 {}; + pm8941_l2: l2 {}; + pm8941_l3: l3 {}; + pm8941_l4: l4 {}; + pm8941_l5: l5 {}; + pm8941_l6: l6 {}; + pm8941_l7: l7 {}; + pm8941_l8: l8 {}; + pm8941_l9: l9 {}; + pm8941_l10: l10 {}; + pm8941_l11: l11 {}; + pm8941_l12: l12 {}; + pm8941_l13: l13 {}; + pm8941_l14: l14 {}; + pm8941_l15: l15 {}; + pm8941_l16: l16 {}; + pm8941_l17: l17 {}; + pm8941_l18: l18 {}; + pm8941_l19: l19 {}; + pm8941_l20: l20 {}; + pm8941_l21: l21 {}; + pm8941_l22: l22 {}; + pm8941_l23: l23 {}; + pm8941_l24: l24 {}; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs2: lvs2 {}; + pm8941_lvs3: lvs3 {}; + + pm8941_5vs1: 5vs1 {}; + pm8941_5vs2: 5vs2 {}; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 968f1043d4f5..b0d443999fcc 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,6 +26,27 @@ bias-pull-up; }; + charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000 0x700>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + }; + pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio"; reg = <0xc000 0x2400>; @@ -120,8 +141,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>, - <0x12f1 0x1>; + reg = <0x3600 0x100>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4b1fa9f42ad5..4f8e07811746 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -239,7 +239,7 @@ #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; reg = <0xffd90000 0x1000>, /* SRU */ - <0xffd91000 0x1240>, /* SSI */ + <0xffd91000 0x240>, /* SSI */ <0xfffe0000 0x24>; /* ADG */ clocks = <&mstp3_clks R8A7778_CLK_SSI8>, <&mstp3_clks R8A7778_CLK_SSI7>, diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 20afea6f06ef..fe396c8d58db 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -19,12 +19,12 @@ compatible = "renesas,marzen", "renesas,r8a7779"; aliases { - serial2 = &scif2; - serial4 = &scif4; + serial0 = &scif2; + serial1 = &scif4; }; chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "ignore_loglevel root=/dev/nfs ip=on"; stdout-path = &scif2; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 37dec5269491..c553abd711ee 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -174,6 +174,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -187,7 +194,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; @@ -335,6 +342,11 @@ renesas,function = "msiof1"; }; + iic0_pins: iic0 { + renesas,groups = "iic0"; + renesas,function = "iic0"; + }; + iic1_pins: iic1 { renesas,groups = "iic1"; renesas,function = "iic1"; @@ -510,6 +522,8 @@ &iic0 { status = "okay"; + pinctrl-0 = <&iic0_pins>; + pinctrl-names = "default"; }; &iic1 { diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4624d0f2a754..e07ae5d45e19 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1599,7 +1599,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index dc158845afdc..fc44ea361a4b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,6 +242,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -255,7 +262,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts new file mode 100644 index 000000000000..fe0f12fc02a1 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -0,0 +1,282 @@ +/* + * Device Tree Source for the Porter board + * + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Porter"; + compatible = "renesas,porter", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = &scif0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 1666c8a6b143..328f48bd15e7 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1649,7 +1649,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index d4dd5a30ccdf..48ff3e2958ae 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -61,10 +61,35 @@ renesas,function = "intc"; }; + i2c1_pins: i2c1 { + renesas,groups = "i2c1"; + renesas,function = "i2c1"; + }; + mmcif0_pins: mmcif0 { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; &scif2 { @@ -90,6 +115,27 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; @@ -100,3 +146,71 @@ non-removable; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + +/* composite video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 97c8e9ace5eb..a9977d6ee81a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -19,6 +19,18 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + spi0 = &qspi; + vin0 = &vin0; + vin1 = &vin1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -50,6 +62,97 @@ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; + power-domains = <&cpg_clocks>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; + power-domains = <&cpg_clocks>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; + power-domains = <&cpg_clocks>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; + power-domains = <&cpg_clocks>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; + power-domains = <&cpg_clocks>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; + power-domains = <&cpg_clocks>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; + power-domains = <&cpg_clocks>; + }; + cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; @@ -407,6 +510,73 @@ status = "disabled"; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C1>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C2>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C3>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C4>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C5>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; @@ -446,6 +616,140 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7794", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + }; + + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7794"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7794"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clock-names = "usbhs"; + power-domains = <&cpg_clocks>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -749,16 +1053,22 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 - R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 - R8A7794_CLK_I2C0 - >; + clock-indices = <R8A7794_CLK_GPIO6 R8A7794_CLK_GPIO5 + R8A7794_CLK_GPIO4 R8A7794_CLK_GPIO3 + R8A7794_CLK_GPIO2 R8A7794_CLK_GPIO1 + R8A7794_CLK_GPIO0 R8A7794_CLK_QSPI_MOD + R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 + R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 + R8A7794_CLK_I2C1 R8A7794_CLK_I2C0>; clock-output-names = - "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", + "gpio1", "gpio0", "qspi_mod", + "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi new file mode 100644 index 000000000000..a07ebf8f6938 --- /dev/null +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -0,0 +1,41 @@ +/* + * Common file for the AA121TD01 panel connected to Renesas R-Car boards + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + panel { + compatible = "mitsubishi,aa121td01", "panel-dpi"; + + width-mm = <261>; + height-mm = <163>; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0273755431a..38c91a839795 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -186,6 +186,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index bae965c123c1..7cdc308bfac5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -178,6 +178,14 @@ }; }; +&mmc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd0>; +}; + &pinctrl { lan8720a { phy_int: phy-int { diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index e36383c701dc..341c1f87936a 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -330,6 +330,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd>; + cap-mmc-highspeed; + cap-sd-highspeed; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index d2180e5d2b05..66fa87d1e2c2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -90,6 +90,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 10 1>; @@ -289,6 +304,8 @@ vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; @@ -343,6 +360,10 @@ }; }; +&spdif { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 316304272118..6399942f1840 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -121,6 +121,20 @@ status = "disabled"; }; + spdif: sound@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -484,6 +498,12 @@ <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <RK_GPIO1 14 RK_FUNC_1 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 20fa0ef0b96b..4e3fd9aefe34 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -48,6 +48,14 @@ reg = <0 0x80000000>; }; + dovdd_1v8: dovdd-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "dovdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + ext_gmac: external-gmac-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -55,6 +63,22 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; pinctrl-names = "default"; @@ -96,7 +120,7 @@ }; }; - vcc_sys: vsys-regulator { + vbat_wl: vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -160,6 +184,23 @@ regulator-always-on; vin-supply = <&vcc_5v>; }; + + /* + * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -325,7 +366,7 @@ regulator-always-on; }; - vcc_18: REG11 { + vccio_wl: vcc_18: REG11 { regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -373,6 +414,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gmac { phy_int: phy-int { rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; @@ -445,7 +492,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; - vmmc-supply = <&vcc_18>; + vmmc-supply = <&vbat_wl>; + vqmmc-supply = <&vccio_wl>; status = "okay"; }; @@ -459,6 +507,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index f82b956ebf17..65c475642d5a 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -79,6 +79,22 @@ }; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc18_dvp>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -86,6 +102,26 @@ pinctrl-0 = <&ir_int>; }; + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -94,6 +130,31 @@ regulator-always-on; regulator-boot-on; }; + + /* + * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc18_dvp: vcc18-dvp-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc18-dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -109,6 +170,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; @@ -121,6 +184,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -297,22 +362,22 @@ }; }; - vcca_codec: LDO_REG8 { + vcca_33: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; + regulator-name = "vcca_33"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; - vcc_wl: SWITCH_REG1 { + vccio_wl: SWITCH_REG1 { regulator-always-on; regulator-boot-on; - regulator-name = "vcc_wl"; + regulator-name = "vccio_wl"; regulator-state-mem { regulator-on-in-suspend; }; @@ -388,6 +453,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ir { ir_int: ir-int { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; @@ -405,6 +476,12 @@ rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi new file mode 100644 index 000000000000..1813b7c36556 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -0,0 +1,277 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/pwm/pwm.h> +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + device_type = "memory"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + mmc-pwrseq = <&emmc_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vccio_pmu>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &phy_rst>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + rx_delay = <0x10>; + tx_delay = <0x30>; +}; + +&i2c0 { + status = "okay"; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts new file mode 100644 index 000000000000..8af35c867a80 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -0,0 +1,167 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-rock2-som.dtsi" + +/ { + model = "Radxa Rock 2 Square"; + compatible = "radxa,rock2-square", "rockchip,rk3288"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + vcc_usb_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + /* Always on as the rockchip usb phy doesn't have a vbus-supply + * property + */ + regulator-always-on; + regulator-name = "vcc_host"; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&gmac { + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + + }; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&spdif { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts new file mode 100644 index 000000000000..c2f52cfb4d06 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -0,0 +1,176 @@ +/* + * Google Veyron Jaq Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Jaq"; + compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", + "google,veyron-jaq-rev1", "google,veyron-jaq", + "google,veyron", "rockchip,rk3288"; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + regulators { + mic_vcc: LDO_REG2 { + regulator-name = "mic_vcc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp_hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 860cea0a7613..5e61f07724d4 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -550,18 +550,6 @@ }; }; - /* - * On Marvell-based hardware this is a no-connect. Make sure we enable - * the pullup so that the line doesn't float. The pullup shouldn't - * hurt on Broadcom-based hardware since the other side is actively - * driving this signal. As proof: we've already got a pullup on RX. - */ - uart0 { - uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; - }; - }; - write-protect { fw_wp_ap: fw-wp-ap { rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4e7c6b7392af..6a79c9c526b8 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -44,6 +44,7 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3288-cru.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/power/rk3288-power.h> #include "skeleton.dtsi" / { @@ -617,8 +618,98 @@ }; pmu: power-management@ff730000 { - compatible = "rockchip,rk3288-pmu", "syscon"; + compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd"; reg = <0xff730000 0x100>; + + power: power-controller { + compatible = "rockchip,rk3288-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * Note: Although SCLK_* are the working clocks + * of device without including on the NOC, needed for + * synchronous reset. + * + * The clocks on the which NOC: + * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. + * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. + * ACLK_RGA is on ACLK_RGA_NIU. + * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. + * + * Which clock are device clocks: + * clocks devices + * *_IEP IEP:Image Enhancement Processor + * *_ISP ISP:Image Signal Processing + * *_VIP VIP:Video Input Processor + * *_VOP* VOP:Visual Output Processor + * *_RGA RGA + * *_EDP* EDP + * *_LVDS_* LVDS + * *_HDMI HDMI + * *_MIPI_* MIPI + */ + pd_vio { + reg = <RK3288_PD_VIO>; + clocks = <&cru ACLK_IEP>, + <&cru ACLK_ISP>, + <&cru ACLK_RGA>, + <&cru ACLK_VIP>, + <&cru ACLK_VOP0>, + <&cru ACLK_VOP1>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru HCLK_IEP>, + <&cru HCLK_ISP>, + <&cru HCLK_RGA>, + <&cru HCLK_VIP>, + <&cru HCLK_VOP0>, + <&cru HCLK_VOP1>, + <&cru PCLK_EDP_CTRL>, + <&cru PCLK_HDMI_CTRL>, + <&cru PCLK_LVDS_PHY>, + <&cru PCLK_MIPI_CSI>, + <&cru PCLK_MIPI_DSI0>, + <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_EDP_24M>, + <&cru SCLK_EDP>, + <&cru SCLK_ISP_JPE>, + <&cru SCLK_ISP>, + <&cru SCLK_RGA>; + }; + + /* + * Note: The following 3 are HEVC(H.265) clocks, + * and on the ACLK_HEVC_NIU (NOC). + */ + pd_hevc { + reg = <RK3288_PD_HEVC>; + clocks = <&cru ACLK_HEVC>, + <&cru SCLK_HEVC_CABAC>, + <&cru SCLK_HEVC_CORE>; + }; + + /* + * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC + * (video endecoder & decoder) clocks that on the + * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). + */ + pd_video { + reg = <RK3288_PD_VIDEO>; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + }; + + /* + * Note: ACLK_GPU is the GPU clock, + * and on the ACLK_GPU_NIU (NOC). + */ + pd_gpu { + reg = <RK3288_PD_GPU>; + clocks = <&cru ACLK_GPU>; + }; + }; }; sgrf: syscon@ff740000 { @@ -657,6 +748,21 @@ status = "disabled"; }; + spdif: sound@ff88b0000 { + compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; + reg = <0xff8b0000 0x10000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + dmas = <&dmac_bus_s 3>; + dma-names = "tx"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; @@ -678,6 +784,7 @@ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; @@ -699,6 +806,7 @@ reg = <0xff930300 0x100>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopb_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -709,6 +817,7 @@ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopl_mmu>; @@ -730,6 +839,7 @@ reg = <0xff940300 0x100>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vopl_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -742,6 +852,7 @@ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; + power-domains = <&power RK3288_PD_VIO>; status = "disabled"; ports { @@ -927,6 +1038,13 @@ #interrupt-cells = <2>; }; + hdmi { + hdmi_ddc: hdmi-ddc { + rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, + <7 20 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + pcfg_pull_up: pcfg-pull-up { bias-pull-up; }; @@ -1215,7 +1333,7 @@ }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { @@ -1230,7 +1348,7 @@ }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { @@ -1253,7 +1371,7 @@ }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { @@ -1268,7 +1386,7 @@ }; uart4_cts: uart4-cts { - rockchip,pins = <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 14 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { @@ -1338,5 +1456,11 @@ <4 3 3 &pcfg_pull_none>; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = <RK_GPIO6 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index a5184ff56933..80f007550324 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index f00cea7aca2f..aa64faa72970 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -46,7 +46,7 @@ regulator-name = "V_TF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index a3d4643b202e..3b76eeeb8410 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -47,7 +47,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <0>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; @@ -73,7 +73,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <3>; - gpios = <&gpj1 3 0>; + gpio = <&gpj1 3 0>; enable-active-high; }; }; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h new file mode 100644 index 000000000000..1afe24629d1f --- /dev/null +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -0,0 +1,880 @@ +#define PINMUX_PIN(no, func, ioset) \ +(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) + +#define PIN_PA0 0 +#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) +#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) +#define PIN_PA0__QSPI0_SCK PINMUX_PIN(PIN_PA0, 2, 1) +#define PIN_PA0__D0 PINMUX_PIN(PIN_PA0, 6, 2) +#define PIN_PA1 1 +#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) +#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) +#define PIN_PA1__QSPI0_CS PINMUX_PIN(PIN_PA1, 2, 1) +#define PIN_PA1__D1 PINMUX_PIN(PIN_PA1, 6, 2) +#define PIN_PA2 2 +#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) +#define PIN_PA2__SDMMC0_DAT0 PINMUX_PIN(PIN_PA2, 1, 1) +#define PIN_PA2__QSPI0_IO0 PINMUX_PIN(PIN_PA2, 2, 1) +#define PIN_PA2__D2 PINMUX_PIN(PIN_PA2, 6, 2) +#define PIN_PA3 3 +#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) +#define PIN_PA3__SDMMC0_DAT1 PINMUX_PIN(PIN_PA3, 1, 1) +#define PIN_PA3__QSPI0_IO1 PINMUX_PIN(PIN_PA3, 2, 1) +#define PIN_PA3__D3 PINMUX_PIN(PIN_PA3, 6, 2) +#define PIN_PA4 4 +#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) +#define PIN_PA4__SDMMC0_DAT2 PINMUX_PIN(PIN_PA4, 1, 1) +#define PIN_PA4__QSPI0_IO2 PINMUX_PIN(PIN_PA4, 2, 1) +#define PIN_PA4__D4 PINMUX_PIN(PIN_PA4, 6, 2) +#define PIN_PA5 5 +#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) +#define PIN_PA5__SDMMC0_DAT3 PINMUX_PIN(PIN_PA5, 1, 1) +#define PIN_PA5__QSPI0_IO3 PINMUX_PIN(PIN_PA5, 2, 1) +#define PIN_PA5__D5 PINMUX_PIN(PIN_PA5, 6, 2) +#define PIN_PA6 6 +#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) +#define PIN_PA6__SDMMC0_DAT4 PINMUX_PIN(PIN_PA6, 1, 1) +#define PIN_PA6__QSPI1_SCK PINMUX_PIN(PIN_PA6, 2, 1) +#define PIN_PA6__TIOA5 PINMUX_PIN(PIN_PA6, 4, 1) +#define PIN_PA6__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA6, 5, 1) +#define PIN_PA6__D6 PINMUX_PIN(PIN_PA6, 6, 2) +#define PIN_PA7 7 +#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) +#define PIN_PA7__SDMMC0_DAT5 PINMUX_PIN(PIN_PA7, 1, 1) +#define PIN_PA7__QSPI1_IO0 PINMUX_PIN(PIN_PA7, 2, 1) +#define PIN_PA7__TIOB5 PINMUX_PIN(PIN_PA7, 4, 1) +#define PIN_PA7__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA7, 5, 1) +#define PIN_PA7__D7 PINMUX_PIN(PIN_PA7, 6, 2) +#define PIN_PA8 8 +#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) +#define PIN_PA8__SDMMC0_DAT6 PINMUX_PIN(PIN_PA8, 1, 1) +#define PIN_PA8__QSPI1_IO1 PINMUX_PIN(PIN_PA8, 2, 1) +#define PIN_PA8__TCLK5 PINMUX_PIN(PIN_PA8, 4, 1) +#define PIN_PA8__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA8, 5, 1) +#define PIN_PA8__NWE_NANDWE PINMUX_PIN(PIN_PA8, 6, 2) +#define PIN_PA9 9 +#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) +#define PIN_PA9__SDMMC0_DAT7 PINMUX_PIN(PIN_PA9, 1, 1) +#define PIN_PA9__QSPI1_IO2 PINMUX_PIN(PIN_PA9, 2, 1) +#define PIN_PA9__TIOA4 PINMUX_PIN(PIN_PA9, 4, 1) +#define PIN_PA9__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA9, 5, 1) +#define PIN_PA9__NCS3 PINMUX_PIN(PIN_PA9, 6, 2) +#define PIN_PA10 10 +#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) +#define PIN_PA10__SDMMC0_RSTN PINMUX_PIN(PIN_PA10, 1, 1) +#define PIN_PA10__QSPI1_IO3 PINMUX_PIN(PIN_PA10, 2, 1) +#define PIN_PA10__TIOB4 PINMUX_PIN(PIN_PA10, 4, 1) +#define PIN_PA10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA10, 5, 1) +#define PIN_PA10__A21_NANDALE PINMUX_PIN(PIN_PA10, 6, 2) +#define PIN_PA11 11 +#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) +#define PIN_PA11__SDMMC0_VDDSEL PINMUX_PIN(PIN_PA11, 1, 1) +#define PIN_PA11__QSPI1_CS PINMUX_PIN(PIN_PA11, 2, 1) +#define PIN_PA11__TCLK4 PINMUX_PIN(PIN_PA11, 4, 1) +#define PIN_PA11__A22_NANDCLE PINMUX_PIN(PIN_PA11, 6, 2) +#define PIN_PA12 12 +#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) +#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1) +#define PIN_PA12__IRQ PINMUX_PIN(PIN_PA12, 2, 1) +#define PIN_PA12__NRD_NANDOE PINMUX_PIN(PIN_PA12, 6, 2) +#define PIN_PA13 13 +#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) +#define PIN_PA13__SDMMC0_CD PINMUX_PIN(PIN_PA13, 1, 1) +#define PIN_PA13__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA13, 5, 1) +#define PIN_PA13__D8 PINMUX_PIN(PIN_PA13, 6, 2) +#define PIN_PA14 14 +#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) +#define PIN_PA14__SPI0_SPCK PINMUX_PIN(PIN_PA14, 1, 1) +#define PIN_PA14__TK1 PINMUX_PIN(PIN_PA14, 2, 1) +#define PIN_PA14__QSPI0_SCK PINMUX_PIN(PIN_PA14, 3, 2) +#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) +#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) +#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) +#define PIN_PA15 14 +#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) +#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) +#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) +#define PIN_PA15__QSPI0_CS PINMUX_PIN(PIN_PA15, 3, 2) +#define PIN_PA15__I2SC1_CK PINMUX_PIN(PIN_PA15, 4, 2) +#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 5, 1) +#define PIN_PA15__D10 PINMUX_PIN(PIN_PA15, 6, 2) +#define PIN_PA16 16 +#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) +#define PIN_PA16__SPI0_MISO PINMUX_PIN(PIN_PA16, 1, 1) +#define PIN_PA16__TD1 PINMUX_PIN(PIN_PA16, 2, 1) +#define PIN_PA16__QSPI0_IO0 PINMUX_PIN(PIN_PA16, 3, 2) +#define PIN_PA16__I2SC1_WS PINMUX_PIN(PIN_PA16, 4, 2) +#define PIN_PA16__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA16, 5, 1) +#define PIN_PA16__D11 PINMUX_PIN(PIN_PA16, 6, 2) +#define PIN_PA17 17 +#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) +#define PIN_PA17__SPI0_NPCS0 PINMUX_PIN(PIN_PA17, 1, 1) +#define PIN_PA17__RD1 PINMUX_PIN(PIN_PA17, 2, 1) +#define PIN_PA17__QSPI0_IO1 PINMUX_PIN(PIN_PA17, 3, 2) +#define PIN_PA17__I2SC1_DI0 PINMUX_PIN(PIN_PA17, 4, 2) +#define PIN_PA17__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA17, 5, 1) +#define PIN_PA17__D12 PINMUX_PIN(PIN_PA17, 6, 2) +#define PIN_PA18 18 +#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) +#define PIN_PA18__SPI0_NPCS1 PINMUX_PIN(PIN_PA18, 1, 1) +#define PIN_PA18__RK1 PINMUX_PIN(PIN_PA18, 2, 1) +#define PIN_PA18__QSPI0_IO2 PINMUX_PIN(PIN_PA18, 3, 2) +#define PIN_PA18__I2SC1_DO0 PINMUX_PIN(PIN_PA18, 4, 2) +#define PIN_PA18__SDMMC1_DAT0 PINMUX_PIN(PIN_PA18, 5, 1) +#define PIN_PA18__D13 PINMUX_PIN(PIN_PA18, 6, 2) +#define PIN_PA19 19 +#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) +#define PIN_PA19__SPI0_NPCS2 PINMUX_PIN(PIN_PA19, 1, 1) +#define PIN_PA19__RF1 PINMUX_PIN(PIN_PA19, 2, 1) +#define PIN_PA19__QSPI0_IO3 PINMUX_PIN(PIN_PA19, 3, 2) +#define PIN_PA19__TIOA0 PINMUX_PIN(PIN_PA19, 4, 1) +#define PIN_PA19__SDMMC1_DAT1 PINMUX_PIN(PIN_PA19, 5, 1) +#define PIN_PA19__D14 PINMUX_PIN(PIN_PA19, 6, 2) +#define PIN_PA20 20 +#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) +#define PIN_PA20__SPI0_NPCS3 PINMUX_PIN(PIN_PA20, 1, 1) +#define PIN_PA20__TIOB0 PINMUX_PIN(PIN_PA20, 4, 1) +#define PIN_PA20__SDMMC1_DAT2 PINMUX_PIN(PIN_PA20, 5, 1) +#define PIN_PA20__D15 PINMUX_PIN(PIN_PA20, 6, 2) +#define PIN_PA21 21 +#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) +#define PIN_PA21__IRQ PINMUX_PIN(PIN_PA21, 1, 2) +#define PIN_PA21__PCK2 PINMUX_PIN(PIN_PA21, 2, 3) +#define PIN_PA21__TCLK0 PINMUX_PIN(PIN_PA21, 4, 1) +#define PIN_PA21__SDMMC1_DAT3 PINMUX_PIN(PIN_PA21, 5, 1) +#define PIN_PA21__NANDRDY PINMUX_PIN(PIN_PA21, 6, 2) +#define PIN_PA22 22 +#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) +#define PIN_PA22__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA22, 1, 1) +#define PIN_PA22__D0 PINMUX_PIN(PIN_PA22, 2, 1) +#define PIN_PA22__TCK PINMUX_PIN(PIN_PA22, 3, 4) +#define PIN_PA22__SPI1_SPCK PINMUX_PIN(PIN_PA22, 4, 2) +#define PIN_PA22__SDMMC1_CK PINMUX_PIN(PIN_PA22, 5, 1) +#define PIN_PA22__QSPI0_SCK PINMUX_PIN(PIN_PA22, 6, 3) +#define PIN_PA23 23 +#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) +#define PIN_PA23__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA23, 1, 1) +#define PIN_PA23__D1 PINMUX_PIN(PIN_PA23, 2, 1) +#define PIN_PA23__TDI PINMUX_PIN(PIN_PA23, 3, 4) +#define PIN_PA23__SPI1_MOSI PINMUX_PIN(PIN_PA23, 4, 2) +#define PIN_PA23__QSPI0_CS PINMUX_PIN(PIN_PA23, 6, 3) +#define PIN_PA24 24 +#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) +#define PIN_PA24__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA24, 1, 1) +#define PIN_PA24__D2 PINMUX_PIN(PIN_PA24, 2, 1) +#define PIN_PA24__TDO PINMUX_PIN(PIN_PA24, 3, 4) +#define PIN_PA24__SPI1_MISO PINMUX_PIN(PIN_PA24, 4, 2) +#define PIN_PA24__QSPI0_IO0 PINMUX_PIN(PIN_PA24, 6, 3) +#define PIN_PA25 25 +#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) +#define PIN_PA25__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA25, 1, 1) +#define PIN_PA25__D3 PINMUX_PIN(PIN_PA25, 2, 1) +#define PIN_PA25__TMS PINMUX_PIN(PIN_PA25, 3, 4) +#define PIN_PA25__SPI1_NPCS0 PINMUX_PIN(PIN_PA25, 4, 2) +#define PIN_PA25__QSPI0_IO1 PINMUX_PIN(PIN_PA25, 6, 3) +#define PIN_PA26 26 +#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) +#define PIN_PA26__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA26, 1, 1) +#define PIN_PA26__D4 PINMUX_PIN(PIN_PA26, 2, 1) +#define PIN_PA26__NTRST PINMUX_PIN(PIN_PA26, 3, 4) +#define PIN_PA26__SPI1_NPCS1 PINMUX_PIN(PIN_PA26, 4, 2) +#define PIN_PA26__QSPI0_IO2 PINMUX_PIN(PIN_PA26, 6, 3) +#define PIN_PA27 27 +#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) +#define PIN_PA27__TIOA1 PINMUX_PIN(PIN_PA27, 1, 2) +#define PIN_PA27__D5 PINMUX_PIN(PIN_PA27, 2, 1) +#define PIN_PA27__SPI0_NPCS2 PINMUX_PIN(PIN_PA27, 3, 2) +#define PIN_PA27__SPI1_NPCS2 PINMUX_PIN(PIN_PA27, 4, 2) +#define PIN_PA27__SDMMC1_RSTN PINMUX_PIN(PIN_PA27, 5, 1) +#define PIN_PA27__QSPI0_IO3 PINMUX_PIN(PIN_PA27, 6, 3) +#define PIN_PA28 28 +#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) +#define PIN_PA28__TIOB1 PINMUX_PIN(PIN_PA28, 1, 2) +#define PIN_PA28__D6 PINMUX_PIN(PIN_PA28, 2, 1) +#define PIN_PA28__SPI0_NPCS3 PINMUX_PIN(PIN_PA28, 3, 2) +#define PIN_PA28__SPI1_NPCS3 PINMUX_PIN(PIN_PA28, 4, 2) +#define PIN_PA28__SDMMC1_CMD PINMUX_PIN(PIN_PA28, 5, 1) +#define PIN_PA28__CLASSD_L0 PINMUX_PIN(PIN_PA28, 6, 1) +#define PIN_PA29 29 +#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) +#define PIN_PA29__TCLK1 PINMUX_PIN(PIN_PA29, 1, 2) +#define PIN_PA29__D7 PINMUX_PIN(PIN_PA29, 2, 1) +#define PIN_PA29__SPI0_NPCS1 PINMUX_PIN(PIN_PA29, 3, 2) +#define PIN_PA29__SDMMC1_WP PINMUX_PIN(PIN_PA29, 5, 1) +#define PIN_PA29__CLASSD_L1 PINMUX_PIN(PIN_PA29, 6, 1) +#define PIN_PA30 30 +#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) +#define PIN_PA30__NWE_NANDWE PINMUX_PIN(PIN_PA30, 2, 1) +#define PIN_PA30__SPI0_NPCS0 PINMUX_PIN(PIN_PA30, 3, 2) +#define PIN_PA30__PWMH0 PINMUX_PIN(PIN_PA30, 4, 1) +#define PIN_PA30__SDMMC1_CD PINMUX_PIN(PIN_PA30, 5, 1) +#define PIN_PA30__CLASSD_L2 PINMUX_PIN(PIN_PA30, 6, 1) +#define PIN_PA31 31 +#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) +#define PIN_PA31__NCS3 PINMUX_PIN(PIN_PA31, 2, 1) +#define PIN_PA31__SPI0_MISO PINMUX_PIN(PIN_PA31, 3, 2) +#define PIN_PA31__PWML0 PINMUX_PIN(PIN_PA31, 4, 1) +#define PIN_PA31__CLASSD_L3 PINMUX_PIN(PIN_PA31, 6, 1) +#define PIN_PB0 32 +#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) +#define PIN_PB0__A21_NANDALE PINMUX_PIN(PIN_PB0, 2, 1) +#define PIN_PB0__SPI0_MOSI PINMUX_PIN(PIN_PB0, 3, 2) +#define PIN_PB0__PWMH1 PINMUX_PIN(PIN_PB0, 4, 1) +#define PIN_PB1 33 +#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) +#define PIN_PB1__A22_NANDCLE PINMUX_PIN(PIN_PB1, 2, 1) +#define PIN_PB1__SPI0_SPCK PINMUX_PIN(PIN_PB1, 3, 2) +#define PIN_PB1__PWML1 PINMUX_PIN(PIN_PB1, 4, 1) +#define PIN_PB1__CLASSD_R0 PINMUX_PIN(PIN_PB1, 6, 1) +#define PIN_PB2 34 +#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) +#define PIN_PB2__NRD_NANDOE PINMUX_PIN(PIN_PB2, 2, 1) +#define PIN_PB2__PWMFI0 PINMUX_PIN(PIN_PB2, 4, 1) +#define PIN_PB2__CLASSD_R1 PINMUX_PIN(PIN_PB2, 6, 1) +#define PIN_PB3 35 +#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) +#define PIN_PB3__URXD4 PINMUX_PIN(PIN_PB3, 1, 1) +#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 2, 1) +#define PIN_PB3__IRQ PINMUX_PIN(PIN_PB3, 3, 3) +#define PIN_PB3__PWMEXTRG0 PINMUX_PIN(PIN_PB3, 4, 1) +#define PIN_PB3__CLASSD_R2 PINMUX_PIN(PIN_PB3, 6, 1) +#define PIN_PB4 36 +#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) +#define PIN_PB4__UTXD4 PINMUX_PIN(PIN_PB4, 1, 1) +#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 2, 1) +#define PIN_PB4__FIQ PINMUX_PIN(PIN_PB4, 3, 4) +#define PIN_PB4__CLASSD_R3 PINMUX_PIN(PIN_PB4, 6, 1) +#define PIN_PB5 37 +#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) +#define PIN_PB5__TCLK2 PINMUX_PIN(PIN_PB5, 1, 1) +#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 2, 1) +#define PIN_PB5__PWMH2 PINMUX_PIN(PIN_PB5, 3, 1) +#define PIN_PB5__QSPI1_SCK PINMUX_PIN(PIN_PB5, 4, 2) +#define PIN_PB5__GTSUCOMP PINMUX_PIN(PIN_PB5, 6, 3) +#define PIN_PB6 38 +#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) +#define PIN_PB6__TIOA2 PINMUX_PIN(PIN_PB6, 1, 1) +#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 2, 1) +#define PIN_PB6__PWML2 PINMUX_PIN(PIN_PB6, 3, 1) +#define PIN_PB6__QSPI1_CS PINMUX_PIN(PIN_PB6, 4, 2) +#define PIN_PB6__GTXER PINMUX_PIN(PIN_PB6, 6, 3) +#define PIN_PB7 39 +#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) +#define PIN_PB7__TIOB2 PINMUX_PIN(PIN_PB7, 1, 1) +#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 2, 1) +#define PIN_PB7__PWMH3 PINMUX_PIN(PIN_PB7, 3, 1) +#define PIN_PB7__QSPI1_IO0 PINMUX_PIN(PIN_PB7, 4, 2) +#define PIN_PB7__GRXCK PINMUX_PIN(PIN_PB7, 6, 3) +#define PIN_PB8 40 +#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) +#define PIN_PB8__TCLK3 PINMUX_PIN(PIN_PB8, 1, 1) +#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 2, 1) +#define PIN_PB8__PWML3 PINMUX_PIN(PIN_PB8, 3, 1) +#define PIN_PB8__QSPI1_IO1 PINMUX_PIN(PIN_PB8, 4, 2) +#define PIN_PB8__GCRS PINMUX_PIN(PIN_PB8, 6, 3) +#define PIN_PB9 41 +#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) +#define PIN_PB9__TIOA3 PINMUX_PIN(PIN_PB9, 1, 1) +#define PIN_PB9__D14 PINMUX_PIN(PIN_PB9, 2, 1) +#define PIN_PB9__PWMFI1 PINMUX_PIN(PIN_PB9, 3, 1) +#define PIN_PB9__QSPI1_IO2 PINMUX_PIN(PIN_PB9, 4, 2) +#define PIN_PB9__GCOL PINMUX_PIN(PIN_PB9, 6, 3) +#define PIN_PB10 42 +#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) +#define PIN_PB10__TIOB3 PINMUX_PIN(PIN_PB10, 1, 1) +#define PIN_PB10__D15 PINMUX_PIN(PIN_PB10, 2, 1) +#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 3, 1) +#define PIN_PB10__QSPI1_IO3 PINMUX_PIN(PIN_PB10, 4, 2) +#define PIN_PB10__GRX2 PINMUX_PIN(PIN_PB10, 6, 3) +#define PIN_PB11 43 +#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) +#define PIN_PB11__LCDDAT0 PINMUX_PIN(PIN_PB11, 1, 1) +#define PIN_PB11__A0_NBS0 PINMUX_PIN(PIN_PB11, 2, 1) +#define PIN_PB11__URXD3 PINMUX_PIN(PIN_PB11, 3, 3) +#define PIN_PB11__PDMIC_DAT PINMUX_PIN(PIN_PB11, 4, 2) +#define PIN_PB11__GRX3 PINMUX_PIN(PIN_PB11, 6, 3) +#define PIN_PB12 44 +#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) +#define PIN_PB12__LCDDAT1 PINMUX_PIN(PIN_PB12, 1, 1) +#define PIN_PB12__A1 PINMUX_PIN(PIN_PB12, 2, 1) +#define PIN_PB12__UTXD3 PINMUX_PIN(PIN_PB12, 3, 3) +#define PIN_PB12__PDMIC_CLK PINMUX_PIN(PIN_PB12, 4, 2) +#define PIN_PB12__GTX2 PINMUX_PIN(PIN_PB12, 6, 3) +#define PIN_PB13 45 +#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) +#define PIN_PB13__LCDDAT2 PINMUX_PIN(PIN_PB13, 1, 1) +#define PIN_PB13__A2 PINMUX_PIN(PIN_PB13, 2, 1) +#define PIN_PB13__PCK1 PINMUX_PIN(PIN_PB13, 3, 3) +#define PIN_PB13__GTX3 PINMUX_PIN(PIN_PB13, 6, 3) +#define PIN_PB14 46 +#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) +#define PIN_PB14__LCDDAT3 PINMUX_PIN(PIN_PB14, 1, 1) +#define PIN_PB14__A3 PINMUX_PIN(PIN_PB14, 2, 1) +#define PIN_PB14__TK1 PINMUX_PIN(PIN_PB14, 3, 2) +#define PIN_PB14__I2SC1_MCK PINMUX_PIN(PIN_PB14, 4, 1) +#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 5, 3) +#define PIN_PB14__GTXCK PINMUX_PIN(PIN_PB14, 6, 3) +#define PIN_PB15 47 +#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) +#define PIN_PB15__LCDDAT4 PINMUX_PIN(PIN_PB15, 1, 1) +#define PIN_PB15__A4 PINMUX_PIN(PIN_PB15, 2, 1) +#define PIN_PB15__TF1 PINMUX_PIN(PIN_PB15, 3, 2) +#define PIN_PB15__I2SC1_CK PINMUX_PIN(PIN_PB15, 4, 1) +#define PIN_PB15__QSPI1_CS PINMUX_PIN(PIN_PB15, 5, 3) +#define PIN_PB15__GTXEN PINMUX_PIN(PIN_PB15, 6, 3) +#define PIN_PB16 48 +#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) +#define PIN_PB16__LCDDAT5 PINMUX_PIN(PIN_PB16, 1, 1) +#define PIN_PB16__A5 PINMUX_PIN(PIN_PB16, 2, 1) +#define PIN_PB16__TD1 PINMUX_PIN(PIN_PB16, 3, 2) +#define PIN_PB16__I2SC1_WS PINMUX_PIN(PIN_PB16, 4, 1) +#define PIN_PB16__QSPI1_IO0 PINMUX_PIN(PIN_PB16, 5, 3) +#define PIN_PB16__GRXDV PINMUX_PIN(PIN_PB16, 6, 3) +#define PIN_PB17 49 +#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) +#define PIN_PB17__LCDDAT6 PINMUX_PIN(PIN_PB17, 1, 1) +#define PIN_PB17__A6 PINMUX_PIN(PIN_PB17, 2, 1) +#define PIN_PB17__RD1 PINMUX_PIN(PIN_PB17, 3, 2) +#define PIN_PB17__I2SC1_DI0 PINMUX_PIN(PIN_PB17, 4, 1) +#define PIN_PB17__QSPI1_IO1 PINMUX_PIN(PIN_PB17, 5, 3) +#define PIN_PB17__GRXER PINMUX_PIN(PIN_PB17, 6, 3) +#define PIN_PB18 50 +#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) +#define PIN_PB18__LCDDAT7 PINMUX_PIN(PIN_PB18, 1, 1) +#define PIN_PB18__A7 PINMUX_PIN(PIN_PB18, 2, 1) +#define PIN_PB18__RK1 PINMUX_PIN(PIN_PB18, 3, 2) +#define PIN_PB18__I2SC1_DO0 PINMUX_PIN(PIN_PB18, 4, 1) +#define PIN_PB18__QSPI1_IO2 PINMUX_PIN(PIN_PB18, 5, 3) +#define PIN_PB18__GRX0 PINMUX_PIN(PIN_PB18, 6, 3) +#define PIN_PB19 51 +#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) +#define PIN_PB19__LCDDAT8 PINMUX_PIN(PIN_PB19, 1, 1) +#define PIN_PB19__A8 PINMUX_PIN(PIN_PB19, 2, 1) +#define PIN_PB19__RF1 PINMUX_PIN(PIN_PB19, 3, 2) +#define PIN_PB19__TIOA3 PINMUX_PIN(PIN_PB19, 4, 2) +#define PIN_PB19__QSPI1_IO3 PINMUX_PIN(PIN_PB19, 5, 3) +#define PIN_PB19__GRX1 PINMUX_PIN(PIN_PB19, 6, 3) +#define PIN_PB20 52 +#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) +#define PIN_PB20__LCDDAT9 PINMUX_PIN(PIN_PB20, 1, 1) +#define PIN_PB20__A9 PINMUX_PIN(PIN_PB20, 2, 1) +#define PIN_PB20__TK0 PINMUX_PIN(PIN_PB20, 3, 1) +#define PIN_PB20__TIOB3 PINMUX_PIN(PIN_PB20, 4, 2) +#define PIN_PB20__PCK1 PINMUX_PIN(PIN_PB20, 5, 4) +#define PIN_PB20__GTX0 PINMUX_PIN(PIN_PB20, 6, 3) +#define PIN_PB21 53 +#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) +#define PIN_PB21__LCDDAT10 PINMUX_PIN(PIN_PB21, 1, 1) +#define PIN_PB21__A10 PINMUX_PIN(PIN_PB21, 2, 1) +#define PIN_PB21__TF0 PINMUX_PIN(PIN_PB21, 3, 1) +#define PIN_PB21__TCLK3 PINMUX_PIN(PIN_PB21, 4, 2) +#define PIN_PB21__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB21, 5, 3) +#define PIN_PB21__GTX1 PINMUX_PIN(PIN_PB21, 6, 3) +#define PIN_PB22 54 +#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) +#define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) +#define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) +#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) +#define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) +#define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) +#define PIN_PB23 55 +#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) +#define PIN_PB23__LCDDAT12 PINMUX_PIN(PIN_PB23, 1, 1) +#define PIN_PB23__A12 PINMUX_PIN(PIN_PB23, 2, 1) +#define PIN_PB23__RD0 PINMUX_PIN(PIN_PB23, 3, 1) +#define PIN_PB23__TIOB2 PINMUX_PIN(PIN_PB23, 4, 2) +#define PIN_PB23__FLEXCOM3_IO0 PINMUX_PIN(PIN_PB23, 5, 3) +#define PIN_PB23__GMDIO PINMUX_PIN(PIN_PB23, 6, 3) +#define PIN_PB24 56 +#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) +#define PIN_PB24__LCDDAT13 PINMUX_PIN(PIN_PB24, 1, 1) +#define PIN_PB24__A13 PINMUX_PIN(PIN_PB24, 2, 1) +#define PIN_PB24__RK0 PINMUX_PIN(PIN_PB24, 3, 1) +#define PIN_PB24__TCLK2 PINMUX_PIN(PIN_PB24, 4, 2) +#define PIN_PB24__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB24, 5, 3) +#define PIN_PB24__ISC_D10 PINMUX_PIN(PIN_PB24, 6, 3) +#define PIN_PB25 57 +#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) +#define PIN_PB25__LCDDAT14 PINMUX_PIN(PIN_PB25, 1, 1) +#define PIN_PB25__A14 PINMUX_PIN(PIN_PB25, 2, 1) +#define PIN_PB25__RF0 PINMUX_PIN(PIN_PB25, 3, 1) +#define PIN_PB25__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB25, 5, 3) +#define PIN_PB25__ISC_D11 PINMUX_PIN(PIN_PB25, 6, 3) +#define PIN_PB26 58 +#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) +#define PIN_PB26__LCDDAT15 PINMUX_PIN(PIN_PB26, 1, 1) +#define PIN_PB26__A15 PINMUX_PIN(PIN_PB26, 2, 1) +#define PIN_PB26__URXD0 PINMUX_PIN(PIN_PB26, 3, 1) +#define PIN_PB26__PDMIC_DAT PINMUX_PIN(PIN_PB26, 4, 1) +#define PIN_PB26__ISC_D0 PINMUX_PIN(PIN_PB26, 6, 3) +#define PIN_PB27 59 +#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) +#define PIN_PB27__LCDDAT16 PINMUX_PIN(PIN_PB27, 1, 1) +#define PIN_PB27__A16 PINMUX_PIN(PIN_PB27, 2, 1) +#define PIN_PB27__UTXD0 PINMUX_PIN(PIN_PB27, 3, 1) +#define PIN_PB27__PDMIC_CLK PINMUX_PIN(PIN_PB27, 4, 1) +#define PIN_PB27__ISC_D1 PINMUX_PIN(PIN_PB27, 6, 3) +#define PIN_PB28 60 +#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) +#define PIN_PB28__LCDDAT17 PINMUX_PIN(PIN_PB28, 1, 1) +#define PIN_PB28__A17 PINMUX_PIN(PIN_PB28, 2, 1) +#define PIN_PB28__FLEXCOM0_IO0 PINMUX_PIN(PIN_PB28, 3, 1) +#define PIN_PB28__TIOA5 PINMUX_PIN(PIN_PB28, 4, 2) +#define PIN_PB28__ISC_D2 PINMUX_PIN(PIN_PB28, 6, 3) +#define PIN_PB29 61 +#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) +#define PIN_PB29__LCDDAT18 PINMUX_PIN(PIN_PB29, 1, 1) +#define PIN_PB29__A18 PINMUX_PIN(PIN_PB29, 2, 1) +#define PIN_PB29__FLEXCOM0_IO1 PINMUX_PIN(PIN_PB29, 3, 1) +#define PIN_PB29__TIOB5 PINMUX_PIN(PIN_PB29, 4, 2) +#define PIN_PB29__ISC_D3 PINMUX_PIN(PIN_PB29, 7, 3) +#define PIN_PB30 62 +#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) +#define PIN_PB30__LCDDAT19 PINMUX_PIN(PIN_PB30, 1, 1) +#define PIN_PB30__A19 PINMUX_PIN(PIN_PB30, 2, 1) +#define PIN_PB30__FLEXCOM0_IO2 PINMUX_PIN(PIN_PB30, 3, 1) +#define PIN_PB30__TCLK5 PINMUX_PIN(PIN_PB30, 4, 2) +#define PIN_PB30__ISC_D4 PINMUX_PIN(PIN_PB30, 6, 3) +#define PIN_PB31 63 +#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) +#define PIN_PB31__LCDDAT20 PINMUX_PIN(PIN_PB31, 1, 1) +#define PIN_PB31__A20 PINMUX_PIN(PIN_PB31, 2, 1) +#define PIN_PB31__FLEXCOM0_IO3 PINMUX_PIN(PIN_PB31, 3, 1) +#define PIN_PB31__TWD0 PINMUX_PIN(PIN_PB31, 4, 1) +#define PIN_PB31__ISC_D5 PINMUX_PIN(PIN_PB31, 6, 3) +#define PIN_PC0 64 +#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) +#define PIN_PC0__LCDDAT21 PINMUX_PIN(PIN_PC0, 1, 1) +#define PIN_PC0__A23 PINMUX_PIN(PIN_PC0, 2, 1) +#define PIN_PC0__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC0, 3, 1) +#define PIN_PC0__TWCK0 PINMUX_PIN(PIN_PC0, 4, 1) +#define PIN_PC0__ISC_D6 PINMUX_PIN(PIN_PC0, 6, 3) +#define PIN_PC1 65 +#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) +#define PIN_PC1__LCDDAT22 PINMUX_PIN(PIN_PC1, 1, 1) +#define PIN_PC1__A24 PINMUX_PIN(PIN_PC1, 2, 1) +#define PIN_PC1__CANTX0 PINMUX_PIN(PIN_PC1, 3, 1) +#define PIN_PC1__SPI1_SPCK PINMUX_PIN(PIN_PC1, 4, 1) +#define PIN_PC1__I2SC0_CK PINMUX_PIN(PIN_PC1, 5, 1) +#define PIN_PC1__ISC_D7 PINMUX_PIN(PIN_PC1, 6, 3) +#define PIN_PC2 66 +#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) +#define PIN_PC2__LCDDAT23 PINMUX_PIN(PIN_PC2, 1, 1) +#define PIN_PC2__A25 PINMUX_PIN(PIN_PC2, 2, 1) +#define PIN_PC2__CANRX0 PINMUX_PIN(PIN_PC2, 3, 1) +#define PIN_PC2__SPI1_MOSI PINMUX_PIN(PIN_PC2, 4, 1) +#define PIN_PC2__I2SC0_MCK PINMUX_PIN(PIN_PC2, 5, 1) +#define PIN_PC2__ISC_D8 PINMUX_PIN(PIN_PC2, 6, 3) +#define PIN_PC3 67 +#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) +#define PIN_PC3__LCDPWM PINMUX_PIN(PIN_PC3, 1, 1) +#define PIN_PC3__NWAIT PINMUX_PIN(PIN_PC3, 2, 1) +#define PIN_PC3__TIOA1 PINMUX_PIN(PIN_PC3, 3, 1) +#define PIN_PC3__SPI1_MISO PINMUX_PIN(PIN_PC3, 4, 1) +#define PIN_PC3__I2SC0_WS PINMUX_PIN(PIN_PC3, 5, 1) +#define PIN_PC3__ISC_D9 PINMUX_PIN(PIN_PC3, 6, 3) +#define PIN_PC4 68 +#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) +#define PIN_PC4__LCDDISP PINMUX_PIN(PIN_PC4, 1, 1) +#define PIN_PC4__NWR1_NBS1 PINMUX_PIN(PIN_PC4, 2, 1) +#define PIN_PC4__TIOB1 PINMUX_PIN(PIN_PC4, 3, 1) +#define PIN_PC4__SPI1_NPCS0 PINMUX_PIN(PIN_PC4, 4, 1) +#define PIN_PC4__I2SC0_DI0 PINMUX_PIN(PIN_PC4, 5, 1) +#define PIN_PC4__ISC_PCK PINMUX_PIN(PIN_PC4, 6, 3) +#define PIN_PC5 69 +#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) +#define PIN_PC5__LCDVSYNC PINMUX_PIN(PIN_PC5, 1, 1) +#define PIN_PC5__NCS0 PINMUX_PIN(PIN_PC5, 2, 1) +#define PIN_PC5__TCLK1 PINMUX_PIN(PIN_PC5, 3, 1) +#define PIN_PC5__SPI1_NPCS1 PINMUX_PIN(PIN_PC5, 4, 1) +#define PIN_PC5__I2SC0_DO0 PINMUX_PIN(PIN_PC5, 5, 1) +#define PIN_PC5__ISC_VSYNC PINMUX_PIN(PIN_PC5, 6, 3) +#define PIN_PC6 70 +#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) +#define PIN_PC6__LCDHSYNC PINMUX_PIN(PIN_PC6, 1, 1) +#define PIN_PC6__NCS1 PINMUX_PIN(PIN_PC6, 2, 1) +#define PIN_PC6__TWD1 PINMUX_PIN(PIN_PC6, 3, 1) +#define PIN_PC6__SPI1_NPCS2 PINMUX_PIN(PIN_PC6, 4, 1) +#define PIN_PC6__ISC_HSYNC PINMUX_PIN(PIN_PC6, 6, 3) +#define PIN_PC7 71 +#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) +#define PIN_PC7__LCDPCK PINMUX_PIN(PIN_PC7, 1, 1) +#define PIN_PC7__NCS2 PINMUX_PIN(PIN_PC7, 2, 1) +#define PIN_PC7__TWCK1 PINMUX_PIN(PIN_PC7, 3, 1) +#define PIN_PC7__SPI1_NPCS3 PINMUX_PIN(PIN_PC7, 4, 1) +#define PIN_PC7__URXD1 PINMUX_PIN(PIN_PC7, 5, 2) +#define PIN_PC7__ISC_MCK PINMUX_PIN(PIN_PC7, 6, 3) +#define PIN_PC8 72 +#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) +#define PIN_PC8__LCDDEN PINMUX_PIN(PIN_PC8, 1, 1) +#define PIN_PC8__NANDRDY PINMUX_PIN(PIN_PC8, 2, 1) +#define PIN_PC8__FIQ PINMUX_PIN(PIN_PC8, 3, 1) +#define PIN_PC8__PCK0 PINMUX_PIN(PIN_PC8, 4, 3) +#define PIN_PC8__UTXD1 PINMUX_PIN(PIN_PC8, 5, 2) +#define PIN_PC8__ISC_FIELD PINMUX_PIN(PIN_PC8, 6, 3) +#define PIN_PC9 73 +#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) +#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3) +#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2) +#define PIN_PC10 74 +#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) +#define PIN_PC10__LCDDAT2 PINMUX_PIN(PIN_PC10, 1, 2) +#define PIN_PC10__GTXCK PINMUX_PIN(PIN_PC10, 2, 1) +#define PIN_PC10__ISC_D1 PINMUX_PIN(PIN_PC10, 3, 1) +#define PIN_PC10__TIOB4 PINMUX_PIN(PIN_PC10, 4, 2) +#define PIN_PC10__CANTX0 PINMUX_PIN(PIN_PC10, 5, 2) +#define PIN_PC11 75 +#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) +#define PIN_PC11__LCDDAT3 PINMUX_PIN(PIN_PC11, 1, 2) +#define PIN_PC11__GTXEN PINMUX_PIN(PIN_PC11, 2, 1) +#define PIN_PC11__ISC_D2 PINMUX_PIN(PIN_PC11, 3, 1) +#define PIN_PC11__TCLK4 PINMUX_PIN(PIN_PC11, 4, 2) +#define PIN_PC11__CANRX0 PINMUX_PIN(PIN_PC11, 5, 2) +#define PIN_PC11__A0_NBS0 PINMUX_PIN(PIN_PC11, 6, 2) +#define PIN_PC12 76 +#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) +#define PIN_PC12__LCDDAT4 PINMUX_PIN(PIN_PC12, 1, 2) +#define PIN_PC12__GRXDV PINMUX_PIN(PIN_PC12, 2, 1) +#define PIN_PC12__ISC_D3 PINMUX_PIN(PIN_PC12, 3, 1) +#define PIN_PC12__URXD3 PINMUX_PIN(PIN_PC12, 4, 1) +#define PIN_PC12__TK0 PINMUX_PIN(PIN_PC12, 5, 2) +#define PIN_PC12__A1 PINMUX_PIN(PIN_PC12, 6, 2) +#define PIN_PC13 77 +#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) +#define PIN_PC13__LCDDAT5 PINMUX_PIN(PIN_PC13, 1, 2) +#define PIN_PC13__GRXER PINMUX_PIN(PIN_PC13, 2, 1) +#define PIN_PC13__ISC_D4 PINMUX_PIN(PIN_PC13, 3, 1) +#define PIN_PC13__UTXD3 PINMUX_PIN(PIN_PC13, 4, 1) +#define PIN_PC13__TF0 PINMUX_PIN(PIN_PC13, 5, 2) +#define PIN_PC13__A2 PINMUX_PIN(PIN_PC13, 6, 2) +#define PIN_PC14 78 +#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) +#define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) +#define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) +#define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) +#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) +#define PIN_PC15 79 +#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) +#define PIN_PC15__LCDDAT7 PINMUX_PIN(PIN_PC15, 1, 2) +#define PIN_PC15__GRX1 PINMUX_PIN(PIN_PC15, 2, 1) +#define PIN_PC15__ISC_D6 PINMUX_PIN(PIN_PC15, 3, 1) +#define PIN_PC15__RD0 PINMUX_PIN(PIN_PC15, 5, 2) +#define PIN_PC15__A4 PINMUX_PIN(PIN_PC15, 6, 2) +#define PIN_PC16 80 +#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) +#define PIN_PC16__LCDDAT10 PINMUX_PIN(PIN_PC16, 1, 2) +#define PIN_PC16__GTX0 PINMUX_PIN(PIN_PC16, 2, 1) +#define PIN_PC16__ISC_D7 PINMUX_PIN(PIN_PC16, 3, 1) +#define PIN_PC16__RK0 PINMUX_PIN(PIN_PC16, 5, 2) +#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 6, 2) +#define PIN_PC17 81 +#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) +#define PIN_PC17__LCDDAT11 PINMUX_PIN(PIN_PC17, 1, 2) +#define PIN_PC17__GTX1 PINMUX_PIN(PIN_PC17, 2, 1) +#define PIN_PC17__ISC_D8 PINMUX_PIN(PIN_PC17, 3, 1) +#define PIN_PC17__RF0 PINMUX_PIN(PIN_PC17, 5, 2) +#define PIN_PC17__A6 PINMUX_PIN(PIN_PC17, 6, 2) +#define PIN_PC18 82 +#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) +#define PIN_PC18__LCDDAT12 PINMUX_PIN(PIN_PC18, 1, 2) +#define PIN_PC18__GMDC PINMUX_PIN(PIN_PC18, 2, 1) +#define PIN_PC18__ISC_D9 PINMUX_PIN(PIN_PC18, 3, 1) +#define PIN_PC18__FLEXCOM3_IO2 PINMUX_PIN(PIN_PC18, 5, 2) +#define PIN_PC18__A7 PINMUX_PIN(PIN_PC18, 6, 2) +#define PIN_PC19 83 +#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) +#define PIN_PC19__LCDDAT13 PINMUX_PIN(PIN_PC19, 1, 2) +#define PIN_PC19__GMDIO PINMUX_PIN(PIN_PC19, 2, 1) +#define PIN_PC19__ISC_D10 PINMUX_PIN(PIN_PC19, 3, 1) +#define PIN_PC19__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC19, 5, 2) +#define PIN_PC19__A8 PINMUX_PIN(PIN_PC19, 6, 2) +#define PIN_PC20 84 +#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) +#define PIN_PC20__LCDDAT14 PINMUX_PIN(PIN_PC20, 1, 2) +#define PIN_PC20__GRXCK PINMUX_PIN(PIN_PC20, 2, 1) +#define PIN_PC20__ISC_D11 PINMUX_PIN(PIN_PC20, 3, 1) +#define PIN_PC20__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC20, 5, 2) +#define PIN_PC20__A9 PINMUX_PIN(PIN_PC20, 6, 2) +#define PIN_PC21 85 +#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) +#define PIN_PC21__LCDDAT15 PINMUX_PIN(PIN_PC21, 1, 2) +#define PIN_PC21__GTXER PINMUX_PIN(PIN_PC21, 2, 1) +#define PIN_PC21__ISC_PCK PINMUX_PIN(PIN_PC21, 3, 1) +#define PIN_PC21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PC21, 5, 2) +#define PIN_PC21__A10 PINMUX_PIN(PIN_PC21, 6, 2) +#define PIN_PC22 86 +#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) +#define PIN_PC22__LCDDAT18 PINMUX_PIN(PIN_PC22, 1, 2) +#define PIN_PC22__GCRS PINMUX_PIN(PIN_PC22, 2, 1) +#define PIN_PC22__ISC_VSYNC PINMUX_PIN(PIN_PC22, 3, 1) +#define PIN_PC22__FLEXCOM3_IO4 PINMUX_PIN(PIN_PC22, 5, 2) +#define PIN_PC22__A11 PINMUX_PIN(PIN_PC22, 6, 2) +#define PIN_PC23 87 +#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) +#define PIN_PC23__LCDDAT19 PINMUX_PIN(PIN_PC23, 1, 2) +#define PIN_PC23__GCOL PINMUX_PIN(PIN_PC23, 2, 1) +#define PIN_PC23__ISC_HSYNC PINMUX_PIN(PIN_PC23, 3, 1) +#define PIN_PC23__A12 PINMUX_PIN(PIN_PC23, 6, 2) +#define PIN_PC24 88 +#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) +#define PIN_PC24__LCDDAT20 PINMUX_PIN(PIN_PC24, 1, 2) +#define PIN_PC24__GRX2 PINMUX_PIN(PIN_PC24, 2, 1) +#define PIN_PC24__ISC_MCK PINMUX_PIN(PIN_PC24, 3, 1) +#define PIN_PC24__A13 PINMUX_PIN(PIN_PC24, 6, 2) +#define PIN_PC25 89 +#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) +#define PIN_PC25__LCDDAT21 PINMUX_PIN(PIN_PC25, 1, 2) +#define PIN_PC25__GRX3 PINMUX_PIN(PIN_PC25, 2, 1) +#define PIN_PC25__ISC_FIELD PINMUX_PIN(PIN_PC25, 3, 1) +#define PIN_PC25__A14 PINMUX_PIN(PIN_PC25, 6, 2) +#define PIN_PC26 90 +#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) +#define PIN_PC26__LCDDAT22 PINMUX_PIN(PIN_PC26, 1, 2) +#define PIN_PC26__GTX2 PINMUX_PIN(PIN_PC26, 2, 1) +#define PIN_PC26__CANTX1 PINMUX_PIN(PIN_PC26, 4, 1) +#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 6, 2) +#define PIN_PC27 91 +#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) +#define PIN_PC27__LCDDAT23 PINMUX_PIN(PIN_PC27, 1, 2) +#define PIN_PC27__GTX3 PINMUX_PIN(PIN_PC27, 2, 1) +#define PIN_PC27__PCK1 PINMUX_PIN(PIN_PC27, 3, 2) +#define PIN_PC27__CANRX1 PINMUX_PIN(PIN_PC27, 4, 1) +#define PIN_PC27__TWD0 PINMUX_PIN(PIN_PC27, 5, 2) +#define PIN_PC27__A16 PINMUX_PIN(PIN_PC27, 6, 2) +#define PIN_PC28 92 +#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) +#define PIN_PC28__LCDPWM PINMUX_PIN(PIN_PC28, 1, 2) +#define PIN_PC28__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC28, 2, 1) +#define PIN_PC28__PCK2 PINMUX_PIN(PIN_PC28, 3, 2) +#define PIN_PC28__TWCK0 PINMUX_PIN(PIN_PC28, 5, 2) +#define PIN_PC28__A17 PINMUX_PIN(PIN_PC28, 6, 2) +#define PIN_PC29 93 +#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) +#define PIN_PC29__LCDDISP PINMUX_PIN(PIN_PC29, 1, 2) +#define PIN_PC29__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC29, 2, 1) +#define PIN_PC29__A18 PINMUX_PIN(PIN_PC29, 6, 2) +#define PIN_PC30 94 +#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) +#define PIN_PC30__LCDVSYNC PINMUX_PIN(PIN_PC30, 1, 2) +#define PIN_PC30__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC30, 2, 1) +#define PIN_PC30__A19 PINMUX_PIN(PIN_PC30, 6, 2) +#define PIN_PC31 95 +#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) +#define PIN_PC31__LCDHSYNC PINMUX_PIN(PIN_PC31, 1, 2) +#define PIN_PC31__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC31, 2, 1) +#define PIN_PC31__URXD3 PINMUX_PIN(PIN_PC31, 3, 2) +#define PIN_PC31__A20 PINMUX_PIN(PIN_PC31, 6, 2) +#define PIN_PD0 96 +#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) +#define PIN_PD0__LCDPCK PINMUX_PIN(PIN_PD0, 1, 2) +#define PIN_PD0__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD0, 2, 1) +#define PIN_PD0__UTXD3 PINMUX_PIN(PIN_PD0, 3, 2) +#define PIN_PD0__GTSUCOMP PINMUX_PIN(PIN_PD0, 4, 2) +#define PIN_PD0__A23 PINMUX_PIN(PIN_PD0, 6, 2) +#define PIN_PD1 97 +#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) +#define PIN_PD1__LCDDEN PINMUX_PIN(PIN_PD1, 1, 2) +#define PIN_PD1__GRXCK PINMUX_PIN(PIN_PD1, 4, 2) +#define PIN_PD1__A24 PINMUX_PIN(PIN_PD1, 6, 2) +#define PIN_PD2 98 +#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) +#define PIN_PD2__URXD1 PINMUX_PIN(PIN_PD2, 1, 1) +#define PIN_PD2__GTXER PINMUX_PIN(PIN_PD2, 4, 2) +#define PIN_PD2__ISC_MCK PINMUX_PIN(PIN_PD2, 5, 2) +#define PIN_PD2__A25 PINMUX_PIN(PIN_PD2, 6, 2) +#define PIN_PD3 99 +#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) +#define PIN_PD3__UTXD1 PINMUX_PIN(PIN_PD3, 1, 1) +#define PIN_PD3__FIQ PINMUX_PIN(PIN_PD3, 2, 2) +#define PIN_PD3__GCRS PINMUX_PIN(PIN_PD3, 4, 2) +#define PIN_PD3__ISC_D11 PINMUX_PIN(PIN_PD3, 5, 2) +#define PIN_PD3__NWAIT PINMUX_PIN(PIN_PD3, 6, 2) +#define PIN_PD4 100 +#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) +#define PIN_PD4__TWD1 PINMUX_PIN(PIN_PD4, 1, 2) +#define PIN_PD4__URXD2 PINMUX_PIN(PIN_PD4, 2, 1) +#define PIN_PD4__GCOL PINMUX_PIN(PIN_PD4, 4, 2) +#define PIN_PD4__ISC_D10 PINMUX_PIN(PIN_PD4, 5, 2) +#define PIN_PD4__NCS0 PINMUX_PIN(PIN_PD4, 6, 2) +#define PIN_PD5 101 +#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) +#define PIN_PD5__TWCK1 PINMUX_PIN(PIN_PD5, 1, 2) +#define PIN_PD5__UTXD2 PINMUX_PIN(PIN_PD5, 2, 1) +#define PIN_PD5__GRX2 PINMUX_PIN(PIN_PD5, 4, 2) +#define PIN_PD5__ISC_D9 PINMUX_PIN(PIN_PD5, 5, 2) +#define PIN_PD5__NCS1 PINMUX_PIN(PIN_PD5, 6, 2) +#define PIN_PD6 102 +#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) +#define PIN_PD6__TCK PINMUX_PIN(PIN_PD6, 1, 2) +#define PIN_PD6__PCK1 PINMUX_PIN(PIN_PD6, 2, 1) +#define PIN_PD6__GRX3 PINMUX_PIN(PIN_PD6, 4, 2) +#define PIN_PD6__ISC_D8 PINMUX_PIN(PIN_PD6, 5, 2) +#define PIN_PD6__NCS2 PINMUX_PIN(PIN_PD6, 6, 2) +#define PIN_PD7 103 +#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) +#define PIN_PD7__TDI PINMUX_PIN(PIN_PD7, 1, 2) +#define PIN_PD7__UTMI_RXVAL PINMUX_PIN(PIN_PD7, 3, 1) +#define PIN_PD7__GTX2 PINMUX_PIN(PIN_PD7, 4, 2) +#define PIN_PD7__ISC_D0 PINMUX_PIN(PIN_PD7, 5, 2) +#define PIN_PD7__NWR1_NBS1 PINMUX_PIN(PIN_PD7, 6, 2) +#define PIN_PD8 104 +#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) +#define PIN_PD8__TDO PINMUX_PIN(PIN_PD8, 1, 2) +#define PIN_PD8__UTMI_RXERR PINMUX_PIN(PIN_PD8, 3, 1) +#define PIN_PD8__GTX3 PINMUX_PIN(PIN_PD8, 4, 2) +#define PIN_PD8__ISC_D1 PINMUX_PIN(PIN_PD8, 5, 2) +#define PIN_PD8__NANDRDY PINMUX_PIN(PIN_PD8, 6, 2) +#define PIN_PD9 105 +#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) +#define PIN_PD9__TMS PINMUX_PIN(PIN_PD9, 1, 2) +#define PIN_PD9__UTMI_RXACT PINMUX_PIN(PIN_PD9, 3, 1) +#define PIN_PD9__GTXCK PINMUX_PIN(PIN_PD9, 4, 2) +#define PIN_PD9__ISC_D2 PINMUX_PIN(PIN_PD9, 5, 2) +#define PIN_PD10 106 +#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) +#define PIN_PD10__NTRST PINMUX_PIN(PIN_PD10, 1, 2) +#define PIN_PD10__UTMI_HDIS PINMUX_PIN(PIN_PD10, 3, 1) +#define PIN_PD10__GTXEN PINMUX_PIN(PIN_PD10, 4, 2) +#define PIN_PD10__ISC_D3 PINMUX_PIN(PIN_PD10, 5, 2) +#define PIN_PD11 107 +#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) +#define PIN_PD11__TIOA1 PINMUX_PIN(PIN_PD11, 1, 3) +#define PIN_PD11__PCK2 PINMUX_PIN(PIN_PD11, 2, 2) +#define PIN_PD11__UTMI_LS0 PINMUX_PIN(PIN_PD11, 3, 1) +#define PIN_PD11__GRXDV PINMUX_PIN(PIN_PD11, 4, 2) +#define PIN_PD11__ISC_D4 PINMUX_PIN(PIN_PD11, 5, 2) +#define PIN_PD11__ISC_MCK PINMUX_PIN(PIN_PD11, 7, 4) +#define PIN_PD12 108 +#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) +#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 1, 3) +#define PIN_PD12__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD12, 2, 2) +#define PIN_PD12__UTMI_LS1 PINMUX_PIN(PIN_PD12, 3, 1) +#define PIN_PD12__GRXER PINMUX_PIN(PIN_PD12, 4, 2) +#define PIN_PD12__ISC_D5 PINMUX_PIN(PIN_PD12, 5, 2) +#define PIN_PD12__ISC_D4 PINMUX_PIN(PIN_PD12, 6, 4) +#define PIN_PD13 109 +#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) +#define PIN_PD13__TCLK1 PINMUX_PIN(PIN_PD13, 1, 3) +#define PIN_PD13__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD13, 2, 2) +#define PIN_PD13__UTMI_CDRPCSEL0 PINMUX_PIN(PIN_PD13, 3, 1) +#define PIN_PD13__GRX0 PINMUX_PIN(PIN_PD13, 4, 2) +#define PIN_PD13__ISC_D6 PINMUX_PIN(PIN_PD13, 5, 2) +#define PIN_PD13__ISC_D5 PINMUX_PIN(PIN_PD13, 6, 4) +#define PIN_PD14 110 +#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) +#define PIN_PD14__TCK PINMUX_PIN(PIN_PD14, 1, 1) +#define PIN_PD14__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD14, 2, 2) +#define PIN_PD14__UTMI_CDRPCSEL1 PINMUX_PIN(PIN_PD14, 3, 1) +#define PIN_PD14__GRX1 PINMUX_PIN(PIN_PD14, 4, 2) +#define PIN_PD14__ISC_D7 PINMUX_PIN(PIN_PD14, 5, 2) +#define PIN_PD14__ISC_D6 PINMUX_PIN(PIN_PD14, 6, 4) +#define PIN_PD15 111 +#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) +#define PIN_PD15__TDI PINMUX_PIN(PIN_PD15, 1, 1) +#define PIN_PD15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD15, 2, 2) +#define PIN_PD15__UTMI_CDRCPDIVEN PINMUX_PIN(PIN_PD15, 3, 1) +#define PIN_PD15__GTX0 PINMUX_PIN(PIN_PD15, 4, 2) +#define PIN_PD15__ISC_PCK PINMUX_PIN(PIN_PD15, 5, 2) +#define PIN_PD15__ISC_D7 PINMUX_PIN(PIN_PD15, 6, 4) +#define PIN_PD16 112 +#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) +#define PIN_PD16__TDO PINMUX_PIN(PIN_PD16, 1, 1) +#define PIN_PD16__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD16, 2, 2) +#define PIN_PD16__UTMI_CDRBISTEN PINMUX_PIN(PIN_PD16, 3, 1) +#define PIN_PD16__GTX1 PINMUX_PIN(PIN_PD16, 4, 2) +#define PIN_PD16__ISC_VSYNC PINMUX_PIN(PIN_PD16, 5, 2) +#define PIN_PD16__ISC_D8 PINMUX_PIN(PIN_PD16, 6, 4) +#define PIN_PD17 113 +#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) +#define PIN_PD17__TMS PINMUX_PIN(PIN_PD17, 1, 1) +#define PIN_PD17__UTMI_CDRCPSELDIV PINMUX_PIN(PIN_PD17, 3, 1) +#define PIN_PD17__GMDC PINMUX_PIN(PIN_PD17, 4, 2) +#define PIN_PD17__ISC_HSYNC PINMUX_PIN(PIN_PD17, 5, 2) +#define PIN_PD17__ISC_D9 PINMUX_PIN(PIN_PD17, 6, 4) +#define PIN_PD18 114 +#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) +#define PIN_PD18__NTRST PINMUX_PIN(PIN_PD18, 1, 1) +#define PIN_PD18__GMDIO PINMUX_PIN(PIN_PD18, 4, 2) +#define PIN_PD18__ISC_FIELD PINMUX_PIN(PIN_PD18, 5, 2) +#define PIN_PD18__ISC_D10 PINMUX_PIN(PIN_PD18, 6, 4) +#define PIN_PD19 115 +#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) +#define PIN_PD19__PCK0 PINMUX_PIN(PIN_PD19, 1, 1) +#define PIN_PD19__TWD1 PINMUX_PIN(PIN_PD19, 2, 3) +#define PIN_PD19__URXD2 PINMUX_PIN(PIN_PD19, 3, 3) +#define PIN_PD19__I2SC0_CK PINMUX_PIN(PIN_PD19, 5, 2) +#define PIN_PD19__ISC_D11 PINMUX_PIN(PIN_PD19, 6, 4) +#define PIN_PD20 116 +#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) +#define PIN_PD20__TIOA2 PINMUX_PIN(PIN_PD20, 1, 3) +#define PIN_PD20__TWCK1 PINMUX_PIN(PIN_PD20, 2, 3) +#define PIN_PD20__UTXD2 PINMUX_PIN(PIN_PD20, 3, 3) +#define PIN_PD20__I2SC0_MCK PINMUX_PIN(PIN_PD20, 5, 2) +#define PIN_PD20__ISC_PCK PINMUX_PIN(PIN_PD20, 6, 4) +#define PIN_PD21 117 +#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) +#define PIN_PD21__TIOB2 PINMUX_PIN(PIN_PD21, 1, 3) +#define PIN_PD21__TWD0 PINMUX_PIN(PIN_PD21, 2, 4) +#define PIN_PD21__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD21, 3, 3) +#define PIN_PD21__I2SC0_WS PINMUX_PIN(PIN_PD21, 5, 2) +#define PIN_PD21__ISC_VSYNC PINMUX_PIN(PIN_PD21, 6, 4) +#define PIN_PD22 118 +#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) +#define PIN_PD22__TCLK2 PINMUX_PIN(PIN_PD22, 1, 3) +#define PIN_PD22__TWCK0 PINMUX_PIN(PIN_PD22, 2, 4) +#define PIN_PD22__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD22, 3, 3) +#define PIN_PD22__I2SC0_DI0 PINMUX_PIN(PIN_PD22, 5, 2) +#define PIN_PD22__ISC_HSYNC PINMUX_PIN(PIN_PD22, 6, 4) +#define PIN_PD23 119 +#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) +#define PIN_PD23__URXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD23__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD23__I2SC0_DO0 PINMUX_PIN(PIN_PD23, 5, 2) +#define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4) +#define PIN_PD24 120 +#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) +#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD25 121 +#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) +#define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3) +#define PIN_PD25__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD25, 3, 3) +#define PIN_PD26 122 +#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) +#define PIN_PD26__SPI1_MOSI PINMUX_PIN(PIN_PD26, 1, 3) +#define PIN_PD26__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD26, 3, 2) +#define PIN_PD27 123 +#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) +#define PIN_PD27__SPI1_MISO PINMUX_PIN(PIN_PD27, 1, 3) +#define PIN_PD27__TCK PINMUX_PIN(PIN_PD27, 2, 3) +#define PIN_PD27__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD27, 3, 2) +#define PIN_PD28 124 +#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) +#define PIN_PD28__SPI1_NPCS0 PINMUX_PIN(PIN_PD28, 1, 3) +#define PIN_PD28__TCI PINMUX_PIN(PIN_PD28, 2, 3) +#define PIN_PD28__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD28, 3, 2) +#define PIN_PD29 125 +#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) +#define PIN_PD29__SPI1_NPCS1 PINMUX_PIN(PIN_PD29, 1, 3) +#define PIN_PD29__TDO PINMUX_PIN(PIN_PD29, 2, 3) +#define PIN_PD29__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD29, 3, 2) +#define PIN_PD29__TIOA3 PINMUX_PIN(PIN_PD29, 4, 3) +#define PIN_PD29__TWD0 PINMUX_PIN(PIN_PD29, 5, 3) +#define PIN_PD30 126 +#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) +#define PIN_PD30__SPI1_NPCS2 PINMUX_PIN(PIN_PD30, 1, 3) +#define PIN_PD30__TMS PINMUX_PIN(PIN_PD30, 2, 3) +#define PIN_PD30__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD30, 3, 2) +#define PIN_PD30__TIOB3 PINMUX_PIN(PIN_PD30, 4, 3) +#define PIN_PD30__TWCK0 PINMUX_PIN(PIN_PD30, 5, 3) +#define PIN_PD31 127 +#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) +#define PIN_PD31__ADTRG PINMUX_PIN(PIN_PD31, 1, 1) +#define PIN_PD31__NTRST PINMUX_PIN(PIN_PD31, 2, 3) +#define PIN_PD31__IRQ PINMUX_PIN(PIN_PD31, 3, 4) +#define PIN_PD31__TCLK3 PINMUX_PIN(PIN_PD31, 4, 3) +#define PIN_PD31__PCK0 PINMUX_PIN(PIN_PD31, 5, 2) diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index cc05cde0f9a4..4dfca8fc49b3 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -263,6 +263,24 @@ cache-level = <2>; }; + sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + + sdmmc1: sdio-host@b0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xb0000000 0x300>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -286,7 +304,7 @@ }; pmc: pmc@f0014000 { - compatible = "atmel,sama5d2-pmc"; + compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -619,6 +637,18 @@ atmel,clk-output-range = <0 83000000>; }; + i2s0_clk: i2s0_clk { + #clock-cells = <0>; + reg = <54>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s1_clk: i2s1_clk { + #clock-cells = <0>; + reg = <55>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -697,6 +727,52 @@ reg = <53>; }; }; + + gck { + compatible = "atmel,sama5d2-clk-generated"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + sdmmc0_gclk: sdmmc0_gclk { + #clock-cells = <0>; + reg = <31>; + }; + + sdmmc1_gclk: sdmmc1_gclk { + #clock-cells = <0>; + reg = <32>; + }; + + tcb0_gclk: tcb0_gclk { + #clock-cells = <0>; + reg = <35>; + atmel,clk-output-range = <0 83000000>; + }; + + tcb1_gclk: tcb1_gclk { + #clock-cells = <0>; + reg = <36>; + atmel,clk-output-range = <0 83000000>; + }; + + pwm_gclk: pwm_gclk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s0_gclk: i2s0_gclk { + #clock-cells = <0>; + reg = <54>; + }; + + i2s1_gclk: i2s1_gclk { + #clock-cells = <0>; + reg = <55>; + }; + }; }; sha@f0028000 { @@ -709,7 +785,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; aes@f002c000 { @@ -725,7 +801,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; spi0: spi@f8000000 { @@ -820,6 +896,32 @@ status = "disabled"; }; + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + status = "disabled"; + }; + + flx1: flexcom@f8038000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8038000 0x200>; + clocks = <&flx1_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8038000 0x800>; + status = "disabled"; + }; + + rstc@f8048000 { + compatible = "atmel,sama5d3-rstc"; + reg = <0xf8048000 0x10>; + clocks = <&clk32k>; + }; + pit: timer@f8048030 { compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; @@ -897,6 +999,36 @@ status = "disabled"; }; + flx2: flexcom@fc010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc010000 0x200>; + clocks = <&flx2_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc010000 0x800>; + status = "disabled"; + }; + + flx3: flexcom@fc014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc014000 0x200>; + clocks = <&flx3_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc014000 0x800>; + status = "disabled"; + }; + + flx4: flexcom@fc018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc018000 0x200>; + clocks = <&flx4_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc018000 0x800>; + status = "disabled"; + }; + aic: interrupt-controller@fc020000 { #interrupt-cells = <3>; compatible = "atmel,sama5d2-aic"; @@ -935,6 +1067,22 @@ #gpio-cells = <2>; clocks = <&pioA_clk>; }; + + tdes@fc044000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc044000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "okay"; + }; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 7fa276515f11..a53279160f98 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,7 +75,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <1000000>; }; }; @@ -322,6 +322,7 @@ atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-res = <10 12>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res-names = "lowres", "highres"; status = "disabled"; @@ -906,7 +907,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 026b252f09b3..e21099a1aef9 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -24,9 +24,9 @@ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ - AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ - AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + <AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC12 periph A MCI2_DA1 with pullup, conflicts with TIOA1 */ + AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* PC13 periph A MCI2_DA2 with pullup, conflicts with TIOB1 */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 83bee7a3a617..89010422812d 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -87,6 +87,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 8d1de29e8da1..15bbaf690047 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -386,7 +386,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; @@ -939,11 +939,11 @@ reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(4)>, + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(4))>, <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(5)>; + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -1189,6 +1189,19 @@ clock-names = "t0_clk", "slow_clk"; }; + macb1: ethernet@fc028000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xfc028000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; @@ -1238,7 +1251,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; tdes@fc04c000 { @@ -1252,7 +1265,7 @@ dma-names = "tx", "rx"; clocks = <&tdes_clk>; clock-names = "tdes_clk"; - status = "disabled"; + status = "okay"; }; sha@fc050000 { @@ -1264,7 +1277,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; rstc@fc068600 { @@ -1350,7 +1363,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x00000000 0x00000000 0x00000000 /* pioD */ + 0x0003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; @@ -1396,7 +1409,6 @@ interrupt-controller; #interrupt-cells = <2>; clocks = <&pioD_clk>; - status = "disabled"; }; pioE: gpio@fc06d000 { @@ -1636,6 +1648,23 @@ }; }; + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + <AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX0 */ + AT91_PIOA 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TX1 */ + AT91_PIOA 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX0 */ + AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RX1 */ + AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXDV */ + AT91_PIOA 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_RXER */ + AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXEN */ + AT91_PIOA 2 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_TXCK */ + AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDC */ + AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE /* G1_MDIO */ + >; + }; + }; + mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 24b4cd24dceb..7fc5602810ad 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -206,7 +206,7 @@ }; accelerometer@1d { - compatible = "adi,adxl34x"; + compatible = "adi,adxl345"; reg = <0x1d>; interrupt-parent = <&irqpin3>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 314e589cfa00..39c470e291f9 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -513,6 +513,13 @@ }; }; + fpgamgr0: fpgamgr@ff706000 { + compatible = "altr,socfpga-fpga-mgr"; + reg = <0xff706000 0x1000 + 0xffb90000 0x1000>; + interrupts = <0 175 4>; + }; + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; @@ -549,46 +556,6 @@ status = "disabled"; }; - i2c0: i2c@ffc04000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc04000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 158 0x4>; - status = "disabled"; - }; - - i2c1: i2c@ffc05000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc05000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 159 0x4>; - status = "disabled"; - }; - - i2c2: i2c@ffc06000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc06000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 160 0x4>; - status = "disabled"; - }; - - i2c3: i2c@ffc07000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc07000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 161 0x4>; - status = "disabled"; - }; - gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; @@ -649,15 +616,44 @@ }; }; - sdr: sdr@ffc25000 { - compatible = "syscon"; - reg = <0xffc25000 0x1000>; + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; }; - sdramedac { - compatible = "altr,sdram-edac"; - altr,sdr-syscon = <&sdr>; - interrupts = <0 39 4>; + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; + status = "disabled"; + }; + + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; }; L2: l2-cache@fffef000 { @@ -688,6 +684,29 @@ reg = <0xffff0000 0x10000>; }; + rst: rstmgr@ffd05000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + }; + + scu: snoop-control-unit@fffec000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffec000 0x100>; + }; + + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + spi0: spi@fff00000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -699,11 +718,6 @@ status = "disabled"; }; - scu: snoop-control-unit@fffec000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xfffec000 0x100>; - }; - spi1: spi@fff01000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -715,6 +729,11 @@ status = "disabled"; }; + sysmgr: sysmgr@ffd08000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd08000 0x4000>; + }; + /* Local timer */ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; @@ -779,13 +798,6 @@ dma-names = "tx", "rx"; }; - rst: rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; - usbphy0: usbphy@0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -829,10 +841,5 @@ clocks = <&osc1>; status = "disabled"; }; - - sysmgr: sysmgr@ffd08000 { - compatible = "altr,sys-mgr", "syscon"; - reg = <0xffd08000 0x4000>; - }; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 2340fcb2b535..cce9e50acf68 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -519,6 +519,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -528,6 +529,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -537,6 +539,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -546,6 +549,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -555,6 +559,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -658,6 +663,7 @@ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -692,6 +698,8 @@ compatible = "snps,dwc2"; reg = <0xffb40000 0xffff>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>; + clock-names = "otg"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 99aa9a1c8af0..567df98f1bb5 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -70,6 +70,33 @@ status = "okay"; }; +&i2c1 { + speed-mode = <0>; + status = "okay"; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <6000>; + i2c-scl-falling-time-ns = <6000>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 6d93475be554..c8ad905d0309 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; }; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 0c24fcb03577..81f81214cdf9 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -152,6 +152,19 @@ <ST_IRQ_SYSCFG_DISABLED>; }; + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + }; + serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; @@ -396,6 +409,8 @@ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; status = "disabled"; }; @@ -406,6 +421,8 @@ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; status = "disabled"; }; @@ -416,6 +433,8 @@ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3_default>; status = "disabled"; }; @@ -426,6 +445,8 @@ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4_default>; status = "disabled"; }; @@ -437,6 +458,8 @@ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi10_default>; status = "disabled"; }; @@ -447,6 +470,8 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi11_default>; status = "disabled"; }; @@ -457,6 +482,8 @@ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi12_default>; status = "disabled"; }; @@ -585,7 +612,6 @@ /* COMMS PWM Module */ pwm0: pwm@9810000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9810000 0x68>; pinctrl-names = "default"; @@ -593,12 +619,13 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <1>; + + status = "disabled"; }; /* SBC PWM Module */ pwm1: pwm@9510000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9510000 0x68>; pinctrl-names = "default"; @@ -609,6 +636,49 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <4>; + + status = "disabled"; + }; + + rng10: rng@08a89000 { + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + rng11: rng@08a8a000 { + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + ethernet0: dwmac@9630000 { + device_type = "network"; + status = "disabled"; + compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0x9630000 0x8000>, <0x80 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; + + st,syscon = <&syscfg_sbc_reg 0x80>; + st,gmac_en; + resets = <&softreset STIH407_ETH1_SOFTRESET>; + reset-names = "stmmaceth"; + + interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>, + <GIC_SPI 99 IRQ_TYPE_NONE>; + interrupt-names = "macirq", "eth_wake_irq"; + + /* DMA Bus Mode */ + snps,pbl = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>, + <&clk_s_c0_flexgen CLK_ETH_PHY>; }; rng10: rng@08a89000 { diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 1683debd0854..a538ae52d32b 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0x0961f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; pio0: gpio@09610000 { @@ -107,12 +107,38 @@ st,retime-pin-mask = <0x3f>; }; + cec0 { + pinctrl_cec0_default: cec0-default { + st,pins { + hdmi_cec = <&pio2 4 ALT1 BIDIR>; + }; + }; + }; + rc { pinctrl_ir: ir0 { st,pins { ir = <&pio4 0 ALT2 IN>; }; }; + + pinctrl_uhf: uhf0 { + st,pins { + ir = <&pio4 1 ALT2 IN>; + }; + }; + + pinctrl_tx: tx0 { + st,pins { + tx = <&pio4 2 ALT2 OUT>; + }; + }; + + pinctrl_tx_od: tx_od0 { + st,pins { + tx_od = <&pio4 3 ALT2 OUT>; + }; + }; }; /* SBC_ASC0 - UART10 */ @@ -190,9 +216,9 @@ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>; }; }; @@ -230,6 +256,33 @@ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; }; }; + + pinctrl_rmii1: rmii1-0 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk: rmii1_phyclk { + st,pins { + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext { + st,pins { + phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>; + }; + }; }; pwm1 { @@ -254,6 +307,57 @@ }; }; }; + + spi10 { + pinctrl_spi10_default: spi10-4w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 OUT>; + mrst = <&pio4 7 ALT1 IN>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + + pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 BIDIR_PU>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + }; + + spi11 { + pinctrl_spi11_default: spi11-4w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 OUT>; + mrst = <&pio3 0 ALT2 IN>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + + pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 BIDIR_PU>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + }; + + spi12 { + pinctrl_spi12_default: spi12-4w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 OUT>; + mrst = <&pio3 4 ALT2 IN>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + + pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 BIDIR_PU>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + }; }; pin-controller-front0 { @@ -264,7 +368,7 @@ reg = <0x0920f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; pio10: pio@09200000 { @@ -422,20 +526,180 @@ }; i2c3 { - pinctrl_i2c3_default: i2c3-default { + pinctrl_i2c3_default: i2c3-alt1-0 { st,pins { sda = <&pio18 6 ALT1 BIDIR>; scl = <&pio18 5 ALT1 BIDIR>; }; }; + pinctrl_i2c3_alt1_1: i2c3-alt1-1 { + st,pins { + sda = <&pio17 7 ALT1 BIDIR>; + scl = <&pio17 6 ALT1 BIDIR>; + }; + }; + pinctrl_i2c3_alt3_0: i2c3-alt3-0 { + st,pins { + sda = <&pio13 6 ALT3 BIDIR>; + scl = <&pio13 5 ALT3 BIDIR>; + }; + }; }; spi0 { - pinctrl_spi0_default: spi0-default { + pinctrl_spi0_default: spi0-4w-alt2-0 { + st,pins { + mtsr = <&pio10 6 ALT2 OUT>; + mrst = <&pio10 7 ALT2 IN>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 { + st,pins { + mtsr = <&pio10 6 ALT2 BIDIR_PU>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 OUT>; + mrst = <&pio19 5 ALT1 IN>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + + pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 BIDIR_PU>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + }; + + spi1 { + pinctrl_spi1_default: spi1-4w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 OUT>; + mrst = <&pio11 2 ALT2 IN>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 BIDIR_PU>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 { st,pins { - mtsr = <&pio12 6 ALT2 BIDIR>; - mrst = <&pio12 7 ALT2 BIDIR>; - scl = <&pio12 5 ALT2 BIDIR>; + mtsr = <&pio14 3 ALT1 OUT>; + mrst = <&pio14 4 ALT1 IN>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + + pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 { + st,pins { + mtsr = <&pio14 3 ALT1 BIDIR_PU>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + }; + + spi2 { + pinctrl_spi2_default: spi2-4w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 OUT>; + mrst = <&pio12 7 ALT2 IN>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR_PU>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 OUT>; + mrst = <&pio14 7 ALT1 IN>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 BIDIR_PU>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 OUT>; + mrst = <&pio15 7 ALT2 IN>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 BIDIR_PU>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + }; + + spi3 { + pinctrl_spi3_default: spi3-4w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 OUT>; + mrst = <&pio13 7 ALT3 IN>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 BIDIR_PU>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 OUT>; + mrst = <&pio17 5 ALT1 IN>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 BIDIR_PU>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 OUT>; + mrst = <&pio18 7 ALT1 IN>; + scl = <&pio18 5 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 BIDIR_PU>; + scl = <&pio18 5 ALT1 OUT>; }; }; }; @@ -627,6 +891,18 @@ }; }; }; + + systrace { + pinctrl_systrace_default: systrace-default { + st,pins { + trc_data0 = <&pio11 3 ALT5 OUT>; + trc_data1 = <&pio11 4 ALT5 OUT>; + trc_data2 = <&pio11 5 ALT5 OUT>; + trc_data3 = <&pio11 6 ALT5 OUT>; + trc_clk = <&pio11 7 ALT5 OUT>; + }; + }; + }; }; pin-controller-front1 { @@ -637,7 +913,7 @@ reg = <0x0921f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; tsin4 { @@ -670,7 +946,7 @@ reg = <0x0922f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; pio30: gpio@09220000 { @@ -758,6 +1034,47 @@ }; }; }; + + spi4 { + pinctrl_spi4_default: spi4-4w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 OUT>; + mrst = <&pio30 2 ALT1 IN>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 BIDIR_PU>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 OUT>; + mrst = <&pio34 2 ALT3 IN>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + + pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 BIDIR_PU>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + }; + + serial3 { + pinctrl_serial3: serial3-0 { + st,pins { + tx = <&pio31 3 ALT1 OUT>; + rx = <&pio31 4 ALT1 IN>; + }; + }; + }; }; pin-controller-flash { @@ -811,6 +1128,57 @@ emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; }; }; + pinctrl_sd0: sd0-0 { + st,pins { + sd_clk = <&pio40 6 ALT1 BIDIR>; + sd_cmd = <&pio40 7 ALT1 BIDIR_PU>; + sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>; + sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>; + sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>; + sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>; + sd_led = <&pio42 0 ALT2 OUT>; + sd_pwren = <&pio42 2 ALT2 OUT>; + sd_vsel = <&pio42 3 ALT2 OUT>; + sd_cd = <&pio42 4 ALT2 IN>; + sd_wp = <&pio42 5 ALT2 IN>; + }; + }; + }; + + fsm { + pinctrl_fsm: fsm { + st,pins { + spi-fsm-clk = <&pio40 1 ALT1 OUT>; + spi-fsm-cs = <&pio40 0 ALT1 OUT>; + spi-fsm-mosi = <&pio40 2 ALT1 OUT>; + spi-fsm-miso = <&pio40 3 ALT1 IN>; + spi-fsm-hol = <&pio40 5 ALT1 OUT>; + spi-fsm-wp = <&pio40 4 ALT1 OUT>; + }; + }; + }; + + nand { + pinctrl_nand: nand { + st,pins { + nand_cs1 = <&pio40 6 ALT3 OUT>; + nand_cs0 = <&pio40 7 ALT3 OUT>; + nand_d0 = <&pio41 0 ALT3 BIDIR>; + nand_d1 = <&pio41 1 ALT3 BIDIR>; + nand_d2 = <&pio41 2 ALT3 BIDIR>; + nand_d3 = <&pio41 3 ALT3 BIDIR>; + nand_d4 = <&pio41 4 ALT3 BIDIR>; + nand_d5 = <&pio41 5 ALT3 BIDIR>; + nand_d6 = <&pio41 6 ALT3 BIDIR>; + nand_d7 = <&pio41 7 ALT3 BIDIR>; + nand_we = <&pio42 0 ALT3 OUT>; + nand_dqs = <&pio42 1 ALT3 OUT>; + nand_ale = <&pio42 2 ALT3 OUT>; + nand_cle = <&pio42 3 ALT3 OUT>; + nand_rnb = <&pio42 4 ALT3 IN>; + nand_oe = <&pio42 5 ALT3 OUT>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 6b914e4bb099..d60f0d8add26 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -10,19 +10,6 @@ #include "stih407-family.dtsi" / { soc { - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; - }; - - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; - }; - sti-display-subsystem { compatible = "st,sti-display-subsystem"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 16f02c5e33a4..118ac284fc4b 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -35,5 +36,29 @@ sd-uhs-sdr104; sd-uhs-ddr50; }; + + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + + ohci0: usb@9a03c00 { + status = "okay"; + }; + + ehci0: usb@9a03e00 { + status = "okay"; + }; + + ohci1: usb@9a83c00 { + status = "okay"; + }; + + ehci1: usb@9a83e00 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 8c6e61a27234..18ed1ad10d32 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -22,6 +22,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY0_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; usb2_picophy2: phy3 { @@ -31,6 +33,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY1_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; ohci0: usb@9a03c00 { @@ -43,6 +47,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ehci0: usb@9a03e00 { @@ -57,6 +63,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ohci1: usb@9a83c00 { @@ -69,6 +77,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; + + status = "disabled"; }; ehci1: usb@9a83e00 { @@ -83,19 +93,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; - }; - - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>; - }; - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>; + status = "disabled"; }; sti-display-subsystem { diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 82eee39ccb31..772d2bb07e5f 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -24,6 +24,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -101,5 +102,12 @@ st_dwc3: dwc3@8f94000 { status = "okay"; }; + + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 148e1772465f..ae6d9978ea19 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -44,7 +44,7 @@ clockgen_a9_pll: clockgen-a9-pll { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 8160a75539a4..965f88160718 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -99,5 +99,11 @@ phys = <&usb2_picophy2>; phy-names = "usb"; }; + + mmc0: sdhci@09060000 { + assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + assigned-clock-parents = <&clk_s_c0_pll1 0>; + assigned-clock-rates = <200000000>; + }; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index f589fe487f13..ad21a4293a33 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -27,6 +27,14 @@ }; }; + pwm0: pwm@9810000 { + status = "okay"; + }; + + pwm1: pwm@9510000 { + status = "okay"; + }; + i2c@9842000 { status = "okay"; }; @@ -79,5 +87,11 @@ status = "okay"; }; + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 2630d78d9e04..97570cb7f2fc 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -93,6 +93,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 143056872650..53660894ea95 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -78,6 +78,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 046a84d9719d..710e2ef516a8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -83,6 +83,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 570754d8df67..3f0aeb8288cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "Gemei G9 Tablet"; @@ -64,7 +65,7 @@ /* * TODO: * 2x cameras via CSI - * bma250 IRQs + * audio * AXP battery management * NAND * OTG @@ -103,12 +104,8 @@ bma250@18 { compatible = "bosch,bma250"; reg = <0x18>; - - /* - * TODO: interrupt pins: - * int1 - PH00 - * int2 - PI10 - */ + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */ }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts new file mode 100644 index 000000000000..487ce63519dc --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-1"; + compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6c927a824ba2..77c31dab86b1 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "INet-97F Rev 02"; @@ -61,8 +62,8 @@ }; }; -&ehci0 { - status = "okay"; +&cpu0 { + cpu-supply = <®_dcdc2>; }; &ehci1 { @@ -75,12 +76,62 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; - interrupt-controller; - #interrupt-cells = <1>; + button@1200 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1200000>; }; }; @@ -94,15 +145,52 @@ status = "okay"; }; -&ohci0 { +&otg_sram { status = "okay"; }; -&ohci1 { - status = "okay"; +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; }; -®_usb1_vbus { +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { status = "okay"; }; @@ -116,8 +204,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts new file mode 100644 index 000000000000..2fffc0434075 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "iNet-9F Rev 03"; + compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index dc2f2aeaff07..7afc7a64eef1 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -156,6 +156,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { emac_power_pin_q5: emac_power_pin@0 { allwinner,pins = "PH19"; @@ -172,6 +176,11 @@ }; }; +®_usb0_vbus { + regulator-boot-on; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -186,7 +195,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 02158bcd64ee..8e50723dbe02 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -91,6 +91,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -154,6 +158,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_marsboard: led_pins@0 { allwinner,pins = "PB5", "PB6", "PB7", "PB8"; @@ -161,6 +169,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_usb1_vbus { @@ -184,7 +199,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 28e32ad705cd..b350448c7217 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -124,6 +124,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 4e3e1b9d8217..39034aa8e1ae 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -104,6 +104,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -129,12 +133,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -164,6 +164,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -178,14 +182,40 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; -®_usb1_vbus { - status = "okay"; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; }; -®_usb2_vbus { - status = "okay"; +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; }; &uart0 { @@ -194,8 +224,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ + usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts new file mode 100644 index 000000000000..de483a1bf36a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2015 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The LinkSprite pcDuino2 board is almost identical to the older + * LinkSprite pcDuino1 board. The only software visible difference + * is that the pcDuino2 board got a USB VBUS voltage regulator, which + * is controlled by the PD2 pin (pulled-up by default). Also one of + * the USB host ports has been replaced with a USB WIFI chip. + */ + +#include "sun4i-a10-pcduino.dts" + +/ { + model = "LinkSprite pcDuino2"; + compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; +}; + +&pio { + usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { + allwinner,pins = "PD2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_pcduino2>; + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */ + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts new file mode 100644 index 000000000000..82e69c3820a2 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -0,0 +1,199 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Point of View Protab2-IPS9"; + compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1f3c51a08113..aa90f319309b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -45,6 +45,7 @@ #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -195,6 +196,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -481,6 +491,14 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "spi3"; }; + + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; }; soc@01c00000 { @@ -1004,6 +1022,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts new file mode 100644 index 000000000000..d4ad02182353 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -0,0 +1,159 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Auxtek t003 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t003>; + + red { + label = "t003-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t003: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_t003: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb0_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +®_usb1_vbus { + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PB10"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 5a422c1ff725..86d046a502e6 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -111,7 +111,7 @@ status = "okay"; at24@50 { - compatible = "at,24c16"; + compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; read-only; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts new file mode 100644 index 000000000000..9fea918f949e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2015 Jelle van der Waa <jelle@vdwaa.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "A10s-Wobo i5"; + compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_wobo_i5>; + + blue { + label = "a10s-wobo-i5:blue:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_wobo>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_b>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + led_pins_wobo_i5: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + emac_power_pin_wobo: emac_power_pin@0 { + allwinner,pins = "PA02"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb1_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index a513b416a807..bddd0de88af6 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -77,6 +77,15 @@ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; }; clocks { @@ -156,6 +165,14 @@ #size-cells = <0>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a10s-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -195,13 +212,6 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", @@ -213,6 +223,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + emac_pins_b: emac0@1 { + allwinner,pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts new file mode 100644 index 000000000000..6fa54b661423 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "INet-98V Rev 02"; + compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts new file mode 100644 index 000000000000..72e93acb5a9e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sun5i-q8-common.dtsi" + +/ { + model = "Q8 A13 Tablet"; + compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f3631c9c6fa2..d910d3a6c41c 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -150,6 +150,16 @@ "apb1_uart3"; }; }; + + soc@01c00000 { + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a13-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; }; &cpu0 { diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi new file mode 100644 index 000000000000..a78e189f6653 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -0,0 +1,180 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts new file mode 100644 index 000000000000..530ab28e9ca2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -0,0 +1,218 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-r8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NextThing C.H.I.P."; + compatible = "nextthing,chip", "allwinner,sun5i-r8"; + + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart1; + serial1 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + chip_vbus_pin: chip_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + chip_id_det_pin: chip_id_det_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "cpuvdd"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "corevdd"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "rtcvdd"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +®_ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_usb0_vbus { + pinctrl-0 = <&chip_vbus_pin>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>, + <&uart3_pins_cts_rts_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&chip_id_det_pin>; + status = "okay"; + + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; +}; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi new file mode 100644 index 000000000000..0ef865601ac9 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun5i-a13.dtsi" + +/ { + chosen { + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 78b993abbaa3..59a9426e3bd4 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -44,6 +44,7 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -102,6 +103,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -285,6 +295,14 @@ clock-output-names = "usb_ohci0", "usb_phy"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; @@ -529,6 +547,27 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_pins_cts_rts_a: uart3-cts-rts@0 { + allwinner,pins = "PG11", "PG12"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + pwm0_pins: pwm0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer@01c20c00 { @@ -550,6 +589,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0cf9926d1e93..f9cf36888d93 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -60,12 +60,34 @@ chosen { stdout-path = "serial0:115200n8"; }; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ + <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + i2c-gpio,delay-us = <5>; + }; }; &ehci1 { status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -82,6 +104,13 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */ + }; }; &mmc0 { @@ -112,6 +141,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PA23", "PA24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_usb2_vbus { diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d0cfadac0691..9a74637f677f 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -54,6 +54,8 @@ compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; aliases { + rtc0 = &pcf8563; + rtc1 = &rtc; serial0 = &uart0; }; @@ -67,13 +69,17 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; phy = <&phy1>; phy-mode = "rgmii"; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; @@ -119,7 +125,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <&vcc_3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -134,7 +140,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; - vmmc-supply = <&vcc_wifi>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; @@ -146,6 +152,13 @@ }; &pio { + gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { allwinner,pins = "PA8"; allwinner,function = "gpio_in"; @@ -164,70 +177,69 @@ &p2wi { status = "okay"; - axp221: pmic@68 { + axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - dcdc1-supply = <&vcc_3v0>; - dcdc5-supply = <&vcc_dram>; - - regulators { - x-powers,dcdc-freq = <3000>; - - vcc_3v0: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; - }; - - vdd_gpu: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; - }; - - vdd_sys_dll: dcdc4 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-sys-dll"; - }; - - vcc_dram: dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; - }; - - vcc_wifi: aldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_wifi"; - }; - - avcc: aldo3 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; - }; - }; }; }; +#include "axp22x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 54bb83b58f42..b6ad7850fac6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -61,7 +61,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + simplefb_hdmi: framebuffer@0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -69,7 +69,7 @@ status = "disabled"; }; - framebuffer@1 { + simplefb_lcd: framebuffer@1 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -691,6 +691,24 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_8bit_emmc_pins: mmc2@1 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", @@ -768,6 +786,13 @@ reg = <0x01c20ca0 0x20>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; @@ -1085,7 +1110,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts new file mode 100644 index 000000000000..2d4250b1faf8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2014 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * Copyright 2015 Karsten Merker <merker@debian.org> + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "MSI Primo81 tablet"; + compatible = "msi,primo81", "allwinner,sun6i-a31s"; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + /* rtl8188etv wifi is connected here */ + status = "okay"; +}; + +&i2c0 { + /* pull-ups and device VDDIO use AXP221 DLDO3 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "failed"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + ctp@5d { + pinctrl-names = "default"; + pinctrl-0 = <>911_int_primo81>; + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + accelerometer@1c { + pinctrl-names = "default"; + pinctrl-0 = <&mma8452_int_primo81>; + compatible = "fsl,mma8452"; + reg = <0x1c>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ + #io-channel-cells = <1>; + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + gt911_int_primo81: gt911_int_pin@0 { + allwinner,pins = "PA3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mma8452_int_primo81: mma8452_int_pin@0 { + allwinner,pins = "PA9"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc0_cd_pin_primo81: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-mipi-bridge"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; + vdd-mipi-bridge-supply = <®_eldo3>; +}; + +&usb_otg { + /* otg support requires support for AXP221 usb-power-supply and GPIO */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi new file mode 100644 index 000000000000..ea69fb8ad4d8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Sinlinx SinA31s Core Board"; + compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +/* eMMC on core board */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* AXP221s PMIC on core board */ +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* UART0 pads available on core board */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts new file mode 100644 index 000000000000..6ead2f5c847a --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -0,0 +1,153 @@ +/* + * Copyright 2015 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* The SinA31s development board has the SinA31s core board soldered on */ +#include "sun6i-a31s-sina31s-core.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Sinlinx SinA31s Development Board"; + compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_sina31s>; + + status { + label = "sina31s:status:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + }; + }; +}; + +&ehci0 { + /* USB 2.0 4 port hub IC */ + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_dldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pin_sina31s: led_pin@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts new file mode 100644 index 000000000000..db7fa13f5425 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Sinovoip BPI-M2"; + compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m2>; + + blue { + label = "bpi-m2:blue:usr"; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + green { + label = "bpi-m2:green:usr"; + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + }; + + red { + label = "bpi-m2:red:usr"; + gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ + }; + }; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v0>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bpi_m2: led_pins@0 { + allwinner,pins = "PG5", "PG10", "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_pio { + mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { + allwinner,pins = "PL8"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts new file mode 100644 index 000000000000..b199020733d3 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Lawrence Yu <lyu@micile.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Yones TopTech BS1078 v2 Tablet"; + compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +®_usb1_vbus { + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PH27"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 9f7b472e6725..fd7594ff90d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -92,6 +92,20 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1350000 + 720000 1250000 + 528000 1150000 + 312000 1100000 + 144000 1050000 + >; +}; + &ehci0 { status = "okay"; }; @@ -119,13 +133,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -159,7 +169,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -182,6 +203,37 @@ }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -216,7 +268,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 39a51d5143f7..1fa832d7b469 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -150,6 +154,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; @@ -157,12 +165,24 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + #include "axp209.dtsi" ®_dcdc2 { @@ -205,6 +225,9 @@ }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index e6b019232a9e..8da939ab8350 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -101,6 +101,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts new file mode 100644 index 000000000000..b7fe102475e7 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -0,0 +1,198 @@ +/* + * Copyright 2015 - Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Olimex A20-Olimex-SOM-EVB"; + compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olimex_som_evb>; + + green { + label = "a20-olimex-som-evb:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_olimex_som_evb: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 04237085dc39..35ad7006c53c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -117,6 +117,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8acff78272b7..d5c796c8d16f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -170,6 +170,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &mmc0 { @@ -190,6 +196,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -204,6 +214,27 @@ allwinner,drive = <SUN4I_PINCTRL_20_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_vbus_pin_lime2: usb0_vbus_pin@0 { + allwinner,pins = "PC17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v { @@ -212,6 +243,12 @@ status = "okay"; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_lime2>; + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -226,7 +263,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index c5d70caade82..7e3006f6a775 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -125,6 +125,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c2 { diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 73cd81ee02e3..4f65664e5dfe 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -156,7 +156,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -225,6 +236,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -243,7 +258,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 55a06ceb80ec..71125bf64575 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -141,7 +141,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -203,6 +214,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -221,7 +236,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 5361fce26b45..1757a6ad74e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -82,6 +82,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -108,13 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -142,6 +142,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { allwinner,pins = "PH2"; @@ -157,8 +161,15 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PH11"; + allwinner,pins = "PD2"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -171,13 +182,37 @@ status = "okay"; }; -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; - gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - status = "okay"; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; }; -®_usb2_vbus { +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +/* A single regulator (U24) powers both USB host ports. */ +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; @@ -187,8 +222,16 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index afc9ecebed21..861a4a66fb19 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -111,6 +111,10 @@ allwinner,pins = "PH2"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -137,16 +141,14 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -171,6 +173,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino3: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -185,6 +191,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_ahci_5v { @@ -192,6 +205,31 @@ status = "okay"; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -206,7 +244,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 83c6d3f872ff..78239ad988e7 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -86,6 +86,8 @@ }; }; +#include "axp209.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -135,7 +137,18 @@ status = "okay"; }; -#include "axp209.dtsi" +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; ®_dcdc2 { regulator-always-on; @@ -162,6 +175,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -176,7 +193,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts new file mode 100644 index 000000000000..85b500d8cc4c --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Jelle de Jong <jelledejong@powercraft.nl> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Wits Pro A20 DKT"; + compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 391230c3dc93..e02eb720c4fc 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/clock/sun4i-a10-pll2.h> #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -199,6 +200,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -465,6 +475,14 @@ clock-output-names = "ir1"; }; + keypad_clk: clk@01c200c4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200c4 0x4>; + clocks = <&osc24M>; + clock-output-names = "keypad"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -483,6 +501,14 @@ clock-output-names = "spi3"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; @@ -1190,6 +1216,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 27a925ec17d2..0c0964d4fa1f 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -175,31 +175,6 @@ clock-output-names = "apb1"; }; - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <6>, - <8>, <9>, <10>, - <13>, <14>, - <19>, <20>, - <21>, <24>, <26>, - <29>, <32>, <36>, - <40>, <44>, <46>, - <52>, <54>, - <57>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - apb1_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun8i-a23-apb1-gates-clk"; @@ -412,6 +387,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + pwm0_pins: pwm0 { + allwinner,pins = "PH0"; + allwinner,function = "pwm0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; @@ -466,6 +448,14 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + pwm: pwm@01c21400 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c21400 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -589,6 +579,14 @@ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; @@ -657,10 +655,18 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; + #interrupt-cells = <3>; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; + r_rsb_pins: r_rsb { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_rsb"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + r_uart_pins_a: r_uart@0 { allwinner,pins = "PL2", "PL3"; allwinner,function = "s_uart"; @@ -668,5 +674,19 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + + r_rsb: rsb@01f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts new file mode 100644 index 000000000000..1aeb06c649b9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -0,0 +1,145 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner GT90H Quad Core Tablet (v4)"; + compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; + /* FIXME this really is aldo1, correct once we've pmic support */ + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts index 382d64c3b78e..c2f22fc33811 100644..120000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -1,54 +1 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate - * dtb file since some gpio-s surrounding the wlan/bluetooth are different, - * and it uses different camera sensors. - */ - -#include "sun8i-a23-ippo-q8h-v5.dts" - -/ { - model = "Ippo Q8H Dual Core Tablet (v1.2)"; - compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23"; -}; +sun8i-a23-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 8d9da6886a4c..c2f22fc33811 100644..120000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -1,136 +1 @@ -/* - * Copyright 2014 Chen-Yu Tsai - * - * Chen-Yu Tsai <wens@csie.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "Ippo Q8H Dual Core Tablet (v5)"; - compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; +sun8i-a23-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts new file mode 100644 index 000000000000..6062ea7a9903 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 2cc27c7a59dc..92e6616979ea 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -50,6 +50,31 @@ }; clocks { + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <6>, + <8>, <9>, <10>, + <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <53>, + <54>, <57>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts index 19db844863bb..4519fd791a8f 100644..120000 --- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts +++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts @@ -1,88 +1 @@ -/* - * Copyright 2015 Vishnu Patekar - * Vishnu Patekar <vishnupatekar0510@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "ET Q8 Quad Core Tablet (v1.6)"; - compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; +sun8i-a33-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts index a43897515fb6..4519fd791a8f 100644..120000 --- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -1,133 +1 @@ -/* - * Copyright 2015 Hans de Goede <hdegoede@redhat.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> - -/ { - model = "Ippo Q8H Quad Core Tablet (v1.2)"; - compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; +sun8i-a33-q8-tablet.dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts new file mode 100644 index 000000000000..44b32296a025 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 1d5390d4e03a..13ce68f06dd6 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -130,6 +130,10 @@ }; }; +&r_rsb { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index faa7d3c1fcea..001d8402ca18 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -72,6 +72,41 @@ clock-output-names = "pll11"; }; + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a33-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, <9>, + <10>, <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <53>, + <54>, <57>, + <58>; + clock-output-names = "ahb1_mipidsi", "ahb1_ss", + "ahb1_dma","ahb1_mmc0", "ahb1_mmc1", + "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc", + "ahb1_sat"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "ss"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -82,6 +117,16 @@ }; soc@01c00000 { + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 5>; + reset-names = "ahb"; + }; + usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi new file mode 100644 index 000000000000..1a69231d2da5 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -0,0 +1,101 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_q8>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + /* backlight is powered by AXP223 DC1SW */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_rsb { + status = "okay"; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5908e3dcf965..1118bf5cc4fb 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -594,7 +594,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi new file mode 100644 index 000000000000..b8241462fcea --- /dev/null +++ b/arch/arm/boot/dts/sunxi-q8-common.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index a9aec23e06f2..40c23a0b7cfc 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -159,7 +159,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; @@ -397,6 +397,13 @@ non-removable; }; + /* CPU DFLL clock */ + clock@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay"; @@ -487,6 +494,12 @@ }; }; + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + gpio-keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 819e2ae2cabe..68669f791c8b 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -610,26 +610,20 @@ sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; - reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ - <0x0 0x70020000 0x0 0x7000>; /* SATA */ - + <0x0 0x70020000 0x0 0x7000>; /* SATA */ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_SATA>, - <&tegra_car TEGRA124_CLK_SATA_OOB>, - <&tegra_car TEGRA124_CLK_CML1>, - <&tegra_car TEGRA124_CLK_PLL_E>; + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; - resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; + <&tegra_car 123>, + <&tegra_car 129>; reset-names = "sata", "sata-oob", "sata-cold"; - phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; phy-names = "sata-phy"; - status = "disabled"; }; @@ -638,7 +632,7 @@ reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_HDA>, - <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 969b828505ae..33173e1bace9 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -603,8 +603,8 @@ <&tegra_car TEGRA20_CLK_PLL_E>; clock-names = "pex", "afi", "pll_e"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 6236bdecb48b..f2879cfcca62 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -126,6 +126,10 @@ }; }; + hda@70030000 { + status = "okay"; + }; + sd1: sdhci@78000000 { status = "okay"; bus-width = <4>; @@ -149,6 +153,7 @@ usb-phy@7d000000 { status = "okay"; + dr_mode = "otg"; vbus-supply = <&usbo1_vbus_reg>; }; @@ -175,7 +180,7 @@ backlight: backlight { compatible = "pwm-backlight"; - /* PWM0 */ + /* PWM_BKL1 */ pwms = <&pwm 0 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; @@ -186,10 +191,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; debounce-interval = <10>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index a5446cba9804..bf361277fe10 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1,8 +1,9 @@ #include "tegra30.dtsi" /* - * Toradex Apalis T30 Device Tree - * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + * Toradex Apalis T30 Module Device Tree + * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A; + * 2GB: V1.0B, V1.0C, V1.0E, V1.1A */ / { model = "Toradex Apalis T30"; @@ -33,8 +34,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -57,25 +58,25 @@ /* Apalis BKL1_PWM */ uart3_rts_n_pc0 { - nvidia,pins = "uart3_rts_n_pc0"; + nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ uart3_cts_n_pa1 { - nvidia,pins = "uart3_cts_n_pa1"; - nvidia,function = "rsvd1"; + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis CAN1 on SPI6 */ spi2_cs0_n_px3 { - nvidia,pins = "spi2_cs0_n_px3", - "spi2_miso_px1", - "spi2_mosi_px0", - "spi2_sck_px2"; + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -91,10 +92,10 @@ /* Apalis CAN2 on SPI4 */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -108,6 +109,30 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Apalis Digital Audio */ + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis I2C3 */ cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", @@ -122,21 +147,21 @@ /* Apalis MMC1 */ sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6", - "sdmmc3_cmd_pa7"; + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_dat0_pb7 { - nvidia,pins = "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "sdmmc3_dat4_pd1", - "sdmmc3_dat5_pd0", - "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -151,32 +176,32 @@ }; /* Apalis PWM1 */ - gpio_pu6 { - nvidia,pins = "gpio_pu6"; + pu6 { + nvidia,pins = "pu6"; nvidia,function = "pwm3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM2 */ - gpio_pu5 { - nvidia,pins = "gpio_pu5"; + pu5 { + nvidia,pins = "pu5"; nvidia,function = "pwm2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM3 */ - gpio_pu4 { - nvidia,pins = "gpio_pu4"; + pu4 { + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis PWM4 */ - gpio_pu3 { - nvidia,pins = "gpio_pu3"; + pu3 { + nvidia,pins = "pu3"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -198,11 +223,11 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -218,10 +243,10 @@ /* Apalis SPI1 */ spi1_sck_px5 { - nvidia,pins = "spi1_sck_px5", - "spi1_mosi_px4", - "spi1_miso_px7", - "spi1_cs0_n_px6"; + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -229,10 +254,10 @@ /* Apalis SPI2 */ lcd_sck_pz4 { - nvidia,pins = "lcd_sck_pz4", - "lcd_sdout_pn5", - "lcd_sdin_pz2", - "lcd_cs0_n_pn4"; + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; nvidia,function = "spi5"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -240,14 +265,14 @@ /* Apalis UART1 */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -255,10 +280,10 @@ /* Apalis UART2 */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -266,8 +291,8 @@ /* Apalis UART3 */ uart2_rxd_pc3 { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -275,8 +300,8 @@ /* Apalis UART4 */ uart3_rxd_pw7 { - nvidia,pins = "uart3_rxd_pw7", - "uart3_txd_pw6"; + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -312,21 +337,21 @@ /* eMMC (On-module) */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -334,10 +359,10 @@ /* LVDS Transceiver Configuration */ pbb0 { - nvidia,pins = "pbb0", - "pbb7", - "pcc1", - "pcc2"; + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -345,10 +370,10 @@ nvidia,lock = <TEGRA_PIN_DISABLE>; }; pbb3 { - nvidia,pins = "pbb3", - "pbb4", - "pbb5", - "pbb6"; + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; nvidia,function = "displayb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -635,6 +660,7 @@ nvidia,sys-clock-req-active-high; }; + /* eMMC */ sdhci@78000600 { status = "okay"; bus-width = <8>; @@ -666,18 +692,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 4d3ddc585641..3ff019f47d00 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -55,7 +55,7 @@ /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; @@ -84,6 +84,7 @@ }; }; + /* SD/MMC */ sdhci@78000200 { status = "okay"; bus-width = <4>; @@ -136,10 +137,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; debounce-interval = <10>; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c4ed1bec4d92..2d8c58fd9357 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -2,8 +2,8 @@ #include "tegra30.dtsi" /* - * Toradex Colibri T30 Device Tree - * Compatible for Revisions 1.1B/1.1C/1.1D + * Toradex Colibri T30 Module Device Tree + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A */ / { model = "Toradex Colibri T30"; @@ -15,8 +15,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -39,7 +39,7 @@ /* Colibri Backlight PWM<A> */ sdmmc3_dat3_pb4 { - nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -66,15 +66,6 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - /* Thermal alert, need to be disabled */ - lcd_dc1_pd2 { - nvidia,pins = "lcd_dc1_pd2"; - nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; - }; - /* Colibri MMC */ kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; @@ -83,11 +74,11 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; kb_row11_ps3 { - nvidia,pins = "kb_row11_ps3", - "kb_row12_ps4", - "kb_row13_ps5", - "kb_row14_ps6", - "kb_row15_ps7"; + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; nvidia,function = "sdmmc2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -95,17 +86,17 @@ /* Colibri SSP */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_dat6_pd3 { - nvidia,pins = "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; @@ -113,14 +104,14 @@ /* Colibri UART_A */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -128,10 +119,10 @@ /* Colibri UART_B */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -139,8 +130,8 @@ /* Colibri UART_C */ uart2_rxd { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -148,25 +139,59 @@ /* eMMC */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; }; }; @@ -236,7 +261,7 @@ /* * EN_+V3.3 switching via FET: * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * see also 3v3 fixed supply */ ldo2_reg: ldo2 { regulator-name = "en_3v3"; @@ -295,6 +320,46 @@ }; }; + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + /* * LM95245 temperature sensor * Note: OVERT_N directly connected to PMIC PWRDN @@ -331,7 +396,8 @@ nvidia,sys-clock-req-active-high; }; - emmc: sdhci@78000600 { + /* eMMC */ + sdhci@78000600 { status = "okay"; bus-width = <8>; non-removable; @@ -365,18 +431,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index c6938ad1b543..313e260529a3 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -42,8 +42,8 @@ <&tegra_car TEGRA30_CLK_CML0>; clock-names = "pex", "afi", "pll_e", "cml"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; @@ -153,7 +153,7 @@ &tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; resets = <&tegra_car 24>, - <&tegra_car 98>; + <&tegra_car 98>; reset-names = "3d", "3d2"; }; @@ -457,7 +457,7 @@ }; i2c@7000c000 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -662,7 +662,7 @@ reg = <0x70030000 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA30_CLK_HDA>, - <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index bfd3bb8c8285..f1e9d40149ab 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -74,12 +73,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index a6a185fae8f1..af493819548d 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -187,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index f80f772d99fb..5baa9fc9c888 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -76,12 +75,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 69a5b7d39629..24626687d4df 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -76,12 +75,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index e8bbc454d788..254642fe0e71 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -218,10 +232,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb2: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 59c2b127cffa..11eb76239feb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,31 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -214,10 +241,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index 1a440f87fa92..b7a032156789 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -58,8 +58,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -75,12 +74,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 3cc90cd37a26..691a17d765c2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -120,6 +122,18 @@ <0x20000100 0x100>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -202,10 +216,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index 955d417a5c42..fc7250c61674 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { @@ -74,12 +73,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 58067dfc16e5..e88559b66be7 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -187,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts new file mode 100644 index 000000000000..9d7ec5c204dd --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Gentil Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Gentil Board"; + compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts new file mode 100644 index 000000000000..498acac3d95d --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -0,0 +1,78 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Vodka Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Vodka Board"; + compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4c7b24611012..259f1a909e24 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -56,24 +56,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + next-level-cache = <&l2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + next-level-cache = <&l2>; }; }; @@ -110,6 +114,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -235,10 +251,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 68ca125b56ea..e5949b934945 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -52,6 +52,26 @@ pinctrl-0 = <&pinctrl_i2c0>; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <32>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; @@ -156,6 +176,25 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1182 diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 7fc782c4fc52..c3173fc9e833 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -15,3 +15,8 @@ model = "Toradex Colibri VF50 on Colibri Evaluation Board"; compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; }; + +&touchscreen { + vf50-ts-min-pressure = <200>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index cee34a32f25b..84f091d1fcf2 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -17,4 +17,51 @@ memory { reg = <0x80000000 0x8000000>; }; + + touchscreen: vf50-touchscreen { + compatible = "toradex,vf50-touchscreen"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + status = "disabled"; + }; +}; + +&iomuxc { + vf610-colibri { + pinctrl_touchctrl_idle: touchctrl_idle { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; + + pinctrl_touchctrl_default: touchctrl_default { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; + + pinctrl_touchctrl_gpios: touchctrl_gpios { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; + }; + }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 375ab23ca743..5438ee4be2ec 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -237,6 +237,33 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD31__NF_IO15 0x28df + VF610_PAD_PTD30__NF_IO14 0x28df + VF610_PAD_PTD29__NF_IO13 0x28df + VF610_PAD_PTD28__NF_IO12 0x28df + VF610_PAD_PTD27__NF_IO11 0x28df + VF610_PAD_PTD26__NF_IO10 0x28df + VF610_PAD_PTD25__NF_IO9 0x28df + VF610_PAD_PTD24__NF_IO8 0x28df + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1582 @@ -274,6 +301,26 @@ }; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6865137fd114..6736bae43a5b 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -564,6 +564,17 @@ status = "disabled"; }; + nfc: nand@400e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-nfc"; + reg = <0x400e0000 0x4000>; + interrupts = <83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_NFC>; + clock-names = "nfc"; + status = "disabled"; + }; + i2c2: i2c@400e6000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi index 557a9c2ace49..46d076d7302b 100644 --- a/arch/arm/boot/dts/wm8750.dtsi +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -17,7 +17,7 @@ cpu { device_type = "cpu"; - compatible = "arm,arm1176ej-s"; + compatible = "arm,arm1176jzf"; }; }; diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e288010522f9..c279293f084c 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -97,6 +97,9 @@ static long long __init keystone_pv_fixup(void) } static const char *const keystone_match[] __initconst = { + "ti,k2hk", + "ti,k2e", + "ti,k2l", "ti,keystone", NULL, }; |