summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/boot/dts/am335x-sancloud-bbe.dts2
-rw-r--r--arch/arm/boot/dts/am437x-gp-evm.dts2
-rw-r--r--arch/arm/boot/dts/am43x-epos-evm.dts2
-rw-r--r--arch/arm/boot/dts/bcm-cygnus.dtsi4
-rw-r--r--arch/arm/boot/dts/bcm2711.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm283x.dtsi2
-rw-r--r--arch/arm/boot/dts/bcm5301x.dtsi4
-rw-r--r--arch/arm/boot/dts/e60k02.dtsi5
-rw-r--r--arch/arm/boot/dts/imx6ul-14x14-evk.dtsi28
-rw-r--r--arch/arm/configs/imx_v6_v7_defconfig1
-rw-r--r--arch/arm/configs/omap2plus_defconfig4
-rw-r--r--arch/arm/mach-imx/cpu.c8
-rw-r--r--arch/arm/mach-mmp/pxa168.h2
-rw-r--r--arch/arm/mach-vexpress/spc.c12
14 files changed, 51 insertions, 27 deletions
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e35493..e5fdb7abb0d5 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
&cpsw_emac0 {
phy-handle = <&ethphy0>;
- phy-mode = "rgmii-txid";
+ phy-mode = "rgmii-id";
};
&i2c0 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500194fe..811c8cae315b 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..078cb473fa7d 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
};
lcd0: display {
- compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+ compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
label = "lcd";
backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..1bc45cfd5453 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
mdio: mdio@18002000 {
compatible = "brcm,iproc-mdio";
reg = <0x18002000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
status = "disabled";
gphy0: ethernet-phy@0 {
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 961bed832755..e2f6ffb00aa9 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -43,7 +43,7 @@
<0x7c000000 0x0 0xfc000000 0x02000000>,
<0x40000000 0x0 0xff800000 0x00800000>;
/* Emulate a contiguous 30-bit address range for DMA */
- dma-ranges = <0xc0000000 0x0 0x00000000 0x3c000000>;
+ dma-ranges = <0xc0000000 0x0 0x00000000 0x40000000>;
/*
* This node is the provider for the enable-method for
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 3caaa57eb6c8..839491628e87 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -37,7 +37,7 @@
trips {
cpu-crit {
- temperature = <80000>;
+ temperature = <90000>;
hysteresis = <0>;
type = "critical";
};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..2d9b4dd05830 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
mdio: mdio@18003000 {
compatible = "brcm,iproc-mdio";
reg = <0x18003000 0x8>;
- #size-cells = <1>;
- #address-cells = <0>;
+ #size-cells = <0>;
+ #address-cells = <1>;
};
mdio-bus-mux@18003000 {
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 6472b056a001..5a2c5320437d 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -265,11 +265,6 @@
regulator-name = "LDORTC1";
regulator-boot-on;
};
-
- ldortc2_reg: LDORTC2 {
- regulator-name = "LDORTC2";
- regulator-boot-on;
- };
};
};
};
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 1506eb12b21e..212144511b66 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -30,14 +30,26 @@
enable-active-high;
};
- reg_sensors: regulator-sensors {
+ reg_peri_3v3: regulator-peri-3v3 {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sensors_reg>;
- regulator-name = "sensors-supply";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "VPERI_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+ /*
+ * If you want to want to make this dynamic please
+ * check schematics and test all affected peripherals:
+ *
+ * - sensors
+ * - ethernet phy
+ * - can
+ * - bluetooth
+ * - wm8960 audio codec
+ * - ov5640 camera
+ */
+ regulator-always-on;
};
reg_can_3v3: regulator-can-3v3 {
@@ -140,6 +152,7 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rmii";
phy-handle = <&ethphy0>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
};
@@ -148,6 +161,7 @@
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rmii";
phy-handle = <&ethphy1>;
+ phy-supply = <&reg_peri_3v3>;
status = "okay";
mdio {
@@ -193,8 +207,8 @@
magnetometer@e {
compatible = "fsl,mag3110";
reg = <0x0e>;
- vdd-supply = <&reg_sensors>;
- vddio-supply = <&reg_sensors>;
+ vdd-supply = <&reg_peri_3v3>;
+ vddio-supply = <&reg_peri_3v3>;
};
};
@@ -227,7 +241,7 @@
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "micron,n25q256a";
+ compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <4>;
@@ -462,7 +476,7 @@
>;
};
- pinctrl_sensors_reg: sensorsreggrp {
+ pinctrl_peri_3v3: peri3v3grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
>;
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 26d6dee67aa6..3608e55eaecd 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 8c37cc8ab6f2..c32c338f7704 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -92,6 +92,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
CONFIG_PHONET=m
+CONFIG_NET_SWITCHDEV=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
@@ -181,6 +182,7 @@ CONFIG_SMSC911X=y
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_DAVINCI_EMAC=y
CONFIG_TI_CPSW=y
+CONFIG_TI_CPSW_SWITCHDEV=y
CONFIG_TI_CPTS=y
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
@@ -554,6 +556,6 @@ CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_TI_CPSW_SWITCHDEV=y
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index d8118031c51f..871f98342d50 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void)
const char *ocotp_compat = NULL;
struct soc_device *soc_dev;
struct device_node *root;
- struct regmap *ocotp;
+ struct regmap *ocotp = NULL;
const char *soc_id;
u64 soc_uid = 0;
u32 val;
@@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void)
soc_id = "i.MX6UL";
break;
case MXC_CPU_IMX6ULL:
- ocotp_compat = "fsl,imx6ul-ocotp";
+ ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULL";
break;
case MXC_CPU_IMX6ULZ:
- ocotp_compat = "fsl,imx6ul-ocotp";
+ ocotp_compat = "fsl,imx6ull-ocotp";
soc_id = "i.MX6ULZ";
break;
case MXC_CPU_IMX6SLL:
@@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void)
ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
if (IS_ERR(ocotp))
pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
+ }
+ if (!IS_ERR_OR_NULL(ocotp)) {
regmap_read(ocotp, OCOTP_UID_H, &val);
soc_uid = val;
regmap_read(ocotp, OCOTP_UID_L, &val);
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
index 0331c58b07a2..dff651b9f252 100644
--- a/arch/arm/mach-mmp/pxa168.h
+++ b/arch/arm/mach-mmp/pxa168.h
@@ -17,9 +17,9 @@ extern void pxa168_clear_keypad_wakeup(void);
#include <linux/platform_data/keypad-pxa27x.h>
#include <linux/pxa168_eth.h>
#include <linux/platform_data/mv_usb.h>
+#include <linux/soc/mmp/cputype.h>
#include "devices.h"
-#include "cputype.h"
extern struct pxa_device_desc pxa168_device_uart1;
extern struct pxa_device_desc pxa168_device_uart2;
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1da11bdb1dfb 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
static int __init ve_spc_clk_init(void)
{
- int cpu;
+ int cpu, cluster;
struct clk *clk;
+ bool init_opp_table[MAX_CLUSTERS] = { false };
if (!info)
return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
continue;
}
+ cluster = topology_physical_package_id(cpu_dev->id);
+ if (init_opp_table[cluster])
+ continue;
+
if (ve_init_opp_table(cpu_dev))
pr_warn("failed to initialise cpu%d opp table\n", cpu);
+ else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+ topology_core_cpumask(cpu_dev->id)))
+ pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+ else
+ init_opp_table[cluster] = true;
}
platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 14:17:15 +0000