diff options
Diffstat (limited to 'arch/arm')
52 files changed, 556 insertions, 382 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 915c10a891ce..37c7951ca4f5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -831,6 +831,8 @@ source "arch/arm/mach-sunxi/Kconfig" source "arch/arm/mach-prima2/Kconfig" +source "arch/arm/mach-tango/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 9bb33ab0608d..5c0e5cc8ed10 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -129,7 +129,12 @@ choice config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" - depends on ARCH_BCM2835 + depends on ARCH_BCM2835 && ARCH_MULTI_V6 + select DEBUG_UART_PL01X + + config DEBUG_BCM2836 + bool "Kernel low-level debugging on BCM2836 PL011 UART" + depends on ARCH_BCM2835 && ARCH_MULTI_V7 select DEBUG_UART_PL01X config DEBUG_BCM_5301X @@ -1461,6 +1466,7 @@ config DEBUG_UART_PHYS default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 default 0x20201000 if DEBUG_BCM2835 + default 0x3f201000 if DEBUG_BCM2836 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 default 0x40081000 if DEBUG_LPC18XX_UART0 @@ -1547,7 +1553,7 @@ config DEBUG_UART_VIRT default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART default 0xf01fb000 if DEBUG_NOMADIK_UART - default 0xf0201000 if DEBUG_BCM2835 + default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836 default 0xf1000300 if DEBUG_BCM_5301X default 0xf1002000 if DEBUG_MT8127_UART0 default 0xf1006000 if DEBUG_MT6589_UART0 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2c2b28ee4811..d1da24885af0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -211,6 +211,7 @@ machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi +machine-$(CONFIG_ARCH_TANGO) += tango machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 2ddaa5136611..3dc7a8cc5812 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -31,7 +31,6 @@ #address-cells = <1>; #size-cells = <0>; enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x3500417c>; cpu0: cpu@0 { device_type = "cpu"; @@ -42,6 +41,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + secondary-boot-reg = <0x3500417c>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 2016b72a8fb7..3f525be28fd0 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -31,7 +31,6 @@ #address-cells = <1>; #size-cells = <0>; enable-method = "brcm,bcm11351-cpu-method"; - secondary-boot-reg = <0x35004178>; cpu0: cpu@0 { device_type = "cpu"; @@ -42,6 +41,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + secondary-boot-reg = <0x35004178>; reg = <1>; }; }; diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi index 31141e83fedd..eed4dd159995 100644 --- a/arch/arm/boot/dts/bcm4708.dtsi +++ b/arch/arm/boot/dts/bcm4708.dtsi @@ -15,6 +15,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "brcm,bcm-nsp-smp"; cpu@0 { device_type = "cpu"; @@ -27,6 +28,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; next-level-cache = <&L2>; + secondary-boot-reg = <0xffff0400>; reg = <0x1>; }; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 2f30d632f1cc..18e3deffbf48 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -152,6 +152,20 @@ interrupt-parent = <&gic>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* Reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; #phy-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 3184e10f260a..07e10ee60bd8 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -158,6 +158,20 @@ interrupt-parent = <&gic>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 110dbd4fb884..e2439e87ee4a 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -88,6 +88,20 @@ status = "disabled"; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 731eefd23fa9..fad0779b1b6e 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -102,6 +102,20 @@ reg = <0x10040000 0x5000>; }; + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_system_controller>; + offset = <0x330C>; /* PS_HOLD_CONTROL */ + mask = <0x5200>; /* reset value */ + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x0400>; /* SWRESET */ + mask = <0x1>; + }; + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 77116dcac01a..7ef121472cdd 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -43,6 +43,8 @@ config ARCH_BCM_NSP select ARCH_BCM_IPROC select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select ARM_ERRATA_764369 if SMP + select HAVE_SMP help Support for Broadcom Northstar Plus SoC. Broadcom Northstar Plus family of SoCs are used for switching control @@ -56,6 +58,11 @@ config ARCH_BCM_5301X bool "Broadcom BCM470X / BCM5301X ARM SoC" depends on ARCH_MULTI_V7 select ARCH_BCM_IPROC + select ARM_ERRATA_754322 + select ARM_ERRATA_775420 + select ARM_ERRATA_764369 if SMP + select HAVE_SMP + help Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores. @@ -129,17 +136,18 @@ comment "Other Architectures" config ARCH_BCM2835 bool "Broadcom BCM2835 family" - depends on ARCH_MULTI_V6 + depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select ARM_ERRATA_411920 + select ARM_ERRATA_411920 if ARCH_MULTI_V6 select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select CLKSRC_OF select PINCTRL select PINCTRL_BCM2835 help - This enables support for the Broadcom BCM2835 SoC. This SoC is - used in the Raspberry Pi and Roku 2 devices. + This enables support for the Broadcom BCM2835 and BCM2836 SoCs. + This SoC is used in the Raspberry Pi and Roku 2 devices. config ARCH_BCM_63XX bool "Broadcom BCM63xx DSL SoC" diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 892261fec0ae..7d665151c772 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -14,7 +14,11 @@ obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o # Northstar Plus -obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o +obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o + +ifeq ($(CONFIG_ARCH_BCM_NSP),y) +obj-$(CONFIG_SMP) += platsmp.o +endif # BCM281XX obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o @@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o # BCM281XX and BCM21664 SMP support -obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o +obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o # BCM281XX and BCM21664 L2 cache control obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o @@ -39,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o # BCM5301X obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o +ifeq ($(CONFIG_ARCH_BCM_5301X),y) +obj-$(CONFIG_SMP) += platsmp.o +endif # BCM63XXx ifeq ($(CONFIG_ARCH_BCM_63XX),y) diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index 5478fe6bcce6..c8830a2b0d60 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -9,40 +9,6 @@ #include <asm/hardware/cache-l2x0.h> #include <asm/mach/arch.h> -#include <asm/siginfo.h> -#include <asm/signal.h> - - -static bool first_fault = true; - -static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, - struct pt_regs *regs) -{ - if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) { - first_fault = false; - - /* - * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens - * for no good reason, possibly left over from the CFE boot - * loader. - */ - pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", - addr, fsr); - - /* Returning non-zero causes fault display and panic */ - return 0; - } - - /* Others should cause a fault */ - return 1; -} - -static void __init bcm5301x_init_early(void) -{ - /* Install our hook */ - hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR, - "imprecise external abort"); -} static const char *const bcm5301x_dt_compat[] __initconst = { "brcm,bcm4708", @@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_compat[] __initconst = { DT_MACHINE_START(BCM5301X, "BCM5301X") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .init_early = bcm5301x_init_early, .dt_compat = bcm5301x_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 0f7b9eac3d15..834d67684e20 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -36,7 +36,12 @@ static void __init bcm2835_init(void) } static const char * const bcm2835_compat[] = { +#ifdef CONFIG_ARCH_MULTI_V6 "brcm,bcm2835", +#endif +#ifdef CONFIG_ARCH_MULTI_V7 + "brcm,bcm2836", +#endif NULL }; diff --git a/arch/arm/mach-bcm/kona_smp.c b/arch/arm/mach-bcm/platsmp.c index da8328b97b7d..575defcc53f9 100644 --- a/arch/arm/mach-bcm/kona_smp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Broadcom Corporation + * Copyright (C) 2014-2015 Broadcom Corporation * Copyright 2014 Linaro Limited * * This program is free software; you can redistribute it and/or @@ -12,12 +12,17 @@ * GNU General Public License for more details. */ -#include <linux/init.h> +#include <linux/cpumask.h> +#include <linux/delay.h> #include <linux/errno.h> +#include <linux/init.h> #include <linux/io.h> +#include <linux/jiffies.h> #include <linux/of.h> #include <linux/sched.h> +#include <linux/smp.h> +#include <asm/cacheflush.h> #include <asm/smp.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> @@ -30,9 +35,10 @@ /* Name of device node property defining secondary boot register location */ #define OF_SECONDARY_BOOT "secondary-boot-reg" +#define MPIDR_CPUID_BITMASK 0x3 /* I/O address of register used to coordinate secondary core startup */ -static u32 secondary_boot; +static u32 secondary_boot_addr; /* * Enable the Cortex A9 Snoop Control Unit @@ -75,47 +81,101 @@ static int __init scu_a9_enable(void) return 0; } +static int nsp_write_lut(void) +{ + void __iomem *sku_rom_lut; + phys_addr_t secondary_startup_phy; + + if (!secondary_boot_addr) { + pr_warn("required secondary boot register not specified\n"); + return -EINVAL; + } + + sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr, + sizeof(secondary_boot_addr)); + if (!sku_rom_lut) { + pr_warn("unable to ioremap SKU-ROM LUT register\n"); + return -ENOMEM; + } + + secondary_startup_phy = virt_to_phys(secondary_startup); + BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX); + + writel_relaxed(secondary_startup_phy, sku_rom_lut); + + /* Ensure the write is visible to the secondary core */ + smp_wmb(); + + iounmap(sku_rom_lut); + + return 0; +} + static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) { static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - struct device_node *node; + struct device_node *cpus_node = NULL; + struct device_node *cpu_node = NULL; int ret; - BUG_ON(secondary_boot); /* We're called only once */ - /* * This function is only called via smp_ops->smp_prepare_cpu(). * That only happens if a "/cpus" device tree node exists * and has an "enable-method" property that selects the SMP * operations defined herein. */ - node = of_find_node_by_path("/cpus"); - BUG_ON(!node); + cpus_node = of_find_node_by_path("/cpus"); + if (!cpus_node) + return; - /* - * Our secondary enable method requires a "secondary-boot-reg" - * property to specify a register address used to request the - * ROM code boot a secondary code. If we have any trouble - * getting this we fall back to uniprocessor mode. - */ - if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) { - pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n", - node->name); - ret = -ENOENT; /* Arrange to disable SMP */ - goto out; + for_each_child_of_node(cpus_node, cpu_node) { + u32 cpuid; + + if (of_node_cmp(cpu_node->type, "cpu")) + continue; + + if (of_property_read_u32(cpu_node, "reg", &cpuid)) { + pr_debug("%s: missing reg property\n", + cpu_node->full_name); + ret = -ENOENT; + goto out; + } + + /* + * "secondary-boot-reg" property should be defined only + * for secondary cpu + */ + if ((cpuid & MPIDR_CPUID_BITMASK) == 1) { + /* + * Our secondary enable method requires a + * "secondary-boot-reg" property to specify a register + * address used to request the ROM code boot a secondary + * core. If we have any trouble getting this we fall + * back to uniprocessor mode. + */ + if (of_property_read_u32(cpu_node, + OF_SECONDARY_BOOT, + &secondary_boot_addr)) { + pr_warn("%s: no" OF_SECONDARY_BOOT "property\n", + cpu_node->name); + ret = -ENOENT; + goto out; + } + } } /* - * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is + * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is * returned, the SoC reported a uniprocessor configuration. * We bail on any other error. */ ret = scu_a9_enable(); out: - of_node_put(node); + of_node_put(cpu_node); + of_node_put(cpus_node); + if (ret) { /* Update the CPU present map to reflect uniprocessor mode */ - BUG_ON(ret != -ENOENT); pr_warn("disabling SMP\n"); init_cpu_present(&only_cpu_0); } @@ -139,7 +199,7 @@ out: * - Wait for the secondary boot register to be re-written, which * indicates the secondary core has started. */ -static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) +static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) { void __iomem *boot_reg; phys_addr_t boot_func; @@ -154,15 +214,16 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) return -EINVAL; } - if (!secondary_boot) { + if (!secondary_boot_addr) { pr_err("required secondary boot register not specified\n"); return -EINVAL; } - boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32)); + boot_reg = ioremap_nocache( + (phys_addr_t)secondary_boot_addr, sizeof(u32)); if (!boot_reg) { pr_err("unable to map boot register for cpu %u\n", cpu_id); - return -ENOSYS; + return -ENOMEM; } /* @@ -191,12 +252,39 @@ static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle) pr_err("timeout waiting for cpu %u to start\n", cpu_id); - return -ENOSYS; + return -ENXIO; +} + +static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + int ret; + + /* + * After wake up, secondary core branches to the startup + * address programmed at SKU ROM LUT location. + */ + ret = nsp_write_lut(); + if (ret) { + pr_err("unable to write startup addr to SKU ROM LUT\n"); + goto out; + } + + /* Send a CPU wakeup interrupt to the secondary core */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + +out: + return ret; } static const struct smp_operations bcm_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, - .smp_boot_secondary = bcm_boot_secondary, + .smp_boot_secondary = kona_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", &bcm_smp_ops); + +struct smp_operations nsp_smp_ops __initdata = { + .smp_prepare_cpus = bcm_smp_prepare_cpus, + .smp_boot_secondary = nsp_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 05c83fca1f81..652a0bb11578 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -29,6 +29,9 @@ menuconfig ARCH_EXYNOS select THERMAL select MFD_SYSCON select CLKSRC_EXYNOS_MCT + select POWER_RESET + select POWER_RESET_SYSCON + select POWER_RESET_SYSCON_POWEROFF help Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index c21e41dad19c..dbf9fe98d479 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -14,9 +14,8 @@ #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/delay.h> -#include <linux/notifier.h> -#include <linux/reboot.h> +#include <asm/cputype.h> #include "exynos-pmu.h" #include "regs-pmu.h" @@ -681,23 +680,6 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, }; -static void exynos_power_off(void) -{ - unsigned int tmp; - - pr_info("Power down.\n"); - tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL); - tmp ^= (1 << 8); - pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL); - - /* Wait a little so we don't give a false warning below */ - mdelay(100); - - pr_err("Power down failed, please power off system manually.\n"); - while (1) - ; -} - static void exynos5420_powerdown_conf(enum sys_powerdown mode) { u32 this_cluster; @@ -879,14 +861,6 @@ static void exynos5420_pmu_init(void) pr_info("EXYNOS5420 PMU initialized\n"); } -static int pmu_restart_notify(struct notifier_block *this, - unsigned long code, void *unused) -{ - pmu_raw_writel(0x1, EXYNOS_SWRESET); - - return NOTIFY_DONE; -} - static const struct exynos_pmu_data exynos3250_pmu_data = { .pmu_config = exynos3250_pmu_config, .pmu_init = exynos3250_pmu_init, @@ -912,7 +886,7 @@ static const struct exynos_pmu_data exynos5250_pmu_data = { .powerdown_conf = exynos5_powerdown_conf, }; -static struct exynos_pmu_data exynos5420_pmu_data = { +static const struct exynos_pmu_data exynos5420_pmu_data = { .pmu_config = exynos5420_pmu_config, .pmu_init = exynos5420_pmu_init, .powerdown_conf = exynos5420_powerdown_conf, @@ -944,20 +918,11 @@ static const struct of_device_id exynos_pmu_of_device_ids[] = { { /*sentinel*/ }, }; -/* - * Exynos PMU restart notifier, handles restart functionality - */ -static struct notifier_block pmu_restart_handler = { - .notifier_call = pmu_restart_notify, - .priority = 128, -}; - static int exynos_pmu_probe(struct platform_device *pdev) { const struct of_device_id *match; struct device *dev = &pdev->dev; struct resource *res; - int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); pmu_base_addr = devm_ioremap_resource(dev, res); @@ -982,12 +947,6 @@ static int exynos_pmu_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pmu_context); - ret = register_restart_handler(&pmu_restart_handler); - if (ret) - dev_warn(dev, "can't register restart handler err=%d\n", ret); - - pm_power_off = exynos_power_off; - dev_dbg(dev, "Exynos PMU Driver probe done\n"); return 0; } diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index fba9068ed260..5e4f4c23b06a 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -484,15 +484,6 @@ #define EXYNOS5420_SWRESET_KFC_SEL 0x3 -#include <asm/cputype.h> -#define MAX_CPUS_IN_CLUSTER 4 - -static inline unsigned int exynos_pmu_cpunr(unsigned int mpidr) -{ - return ((MPIDR_AFFINITY_LEVEL(mpidr, 1) * MAX_CPUS_IN_CLUSTER) - + MPIDR_AFFINITY_LEVEL(mpidr, 0)); -} - /* Only for EXYNOS5420 */ #define EXYNOS5420_ISP_ARM_OPTION 0x2488 #define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0ac180f7b330..15df34fbdf44 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -563,6 +563,7 @@ config SOC_IMX7D select ARM_GIC select HAVE_IMX_ANATOP select HAVE_IMX_MMDC + select HAVE_IMX_SRC help This enables support for Freescale i.MX7 Dual processor. diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index 6dd22cabf4d3..0b5ba4bf572a 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -100,7 +100,7 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label) unsigned pad = pin & IOMUX_PADNUM_MASK; if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", + printk(KERN_ERR "mxc_iomux: Attempt to request nonexistent pin %u for \"%s\"\n", pad, label ? label : "?"); return -EINVAL; } diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index acaf7056efa5..a38b16b69923 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -84,7 +84,7 @@ static void __init imx6ul_init_late(void) platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0); } -static const char *imx6ul_dt_compat[] __initconst = { +static const char * const imx6ul_dt_compat[] __initconst = { "fsl,imx6ul", NULL, }; diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index b450f525a670..5a27f20c9a82 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -105,6 +105,11 @@ static void __init imx7d_init_irq(void) irqchip_init(); } +static void __init imx7d_init_late(void) +{ + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); +} + static const char *const imx7d_dt_compat[] __initconst = { "fsl,imx7d", NULL, @@ -112,6 +117,7 @@ static const char *const imx7d_dt_compat[] __initconst = { DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") .init_irq = imx7d_init_irq, + .init_late = imx7d_init_late, .init_machine = imx7d_init_machine, .dt_compat = imx7d_dt_compat, MACHINE_END diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 263c07a566cb..8c8be861fff2 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -33,24 +33,6 @@ #include "mmc.h" #include "sram.h" -#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) - -static struct platform_device omap_pcm = { - .name = "omap-pcm-audio", - .id = -1, -}; - -static void omap_init_audio(void) -{ - platform_device_register(&omap_pcm); -} - -#else -static inline void omap_init_audio(void) {} -#endif - -/*-------------------------------------------------------------------------*/ - #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE) #define OMAP_RTC_BASE 0xfffb4800 @@ -425,7 +407,6 @@ static int __init omap1_init_devices(void) * in alphabetical order so they're easier to sort through. */ - omap_init_audio(); omap_init_mbox(); omap_init_rtc(); omap_init_spi100k(); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ceefcee6bb85..0ba6a0e6fa19 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -223,8 +223,6 @@ obj-$(CONFIG_SOC_DRA7XX) += omap_hwmod_7xx_data.o # EMU peripherals obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o -obj-$(CONFIG_OMAP_IOMMU) += omap-iommu.o - # OMAP2420 MSDI controller integration support ("MMC") obj-$(CONFIG_SOC_OMAP2420) += msdi.o diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 0a0567f8e8a0..da174c0d603b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1257,7 +1257,7 @@ static struct platform_device omap3_rom_rng_device = { static void __init rx51_init_omap3_rom_rng(void) { if (omap_type() == OMAP2_DEVICE_TYPE_SEC) { - pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); } } diff --git a/arch/arm/mach-omap2/clockdomains81xx_data.c b/arch/arm/mach-omap2/clockdomains81xx_data.c index 53442c86a820..3b5fb05ae701 100644 --- a/arch/arm/mach-omap2/clockdomains81xx_data.c +++ b/arch/arm/mach-omap2/clockdomains81xx_data.c @@ -83,6 +83,14 @@ static struct clockdomain mmu_cfg_81xx_clkdm = { .flags = CLKDM_CAN_SWSUP, }; +static struct clockdomain default_l3_slow_81xx_clkdm = { + .name = "default_l3_slow_clkdm", + .pwrdm = { .name = "default_pwrdm" }, + .cm_inst = TI81XX_CM_DEFAULT_MOD, + .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM, + .flags = CLKDM_CAN_SWSUP, +}; + /* 816x only */ static struct clockdomain alwon_mpu_816x_clkdm = { @@ -96,7 +104,7 @@ static struct clockdomain alwon_mpu_816x_clkdm = { static struct clockdomain active_gem_816x_clkdm = { .name = "active_gem_clkdm", .pwrdm = { .name = "active_pwrdm" }, - .cm_inst = TI816X_CM_ACTIVE_MOD, + .cm_inst = TI81XX_CM_ACTIVE_MOD, .clkdm_offs = TI816X_CM_ACTIVE_GEM_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -128,7 +136,7 @@ static struct clockdomain ivahd2_816x_clkdm = { static struct clockdomain sgx_816x_clkdm = { .name = "sgx_clkdm", .pwrdm = { .name = "sgx_pwrdm" }, - .cm_inst = TI816X_CM_SGX_MOD, + .cm_inst = TI81XX_CM_SGX_MOD, .clkdm_offs = TI816X_CM_SGX_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -136,7 +144,7 @@ static struct clockdomain sgx_816x_clkdm = { static struct clockdomain default_l3_med_816x_clkdm = { .name = "default_l3_med_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_L3_MED_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -144,7 +152,7 @@ static struct clockdomain default_l3_med_816x_clkdm = { static struct clockdomain default_ducati_816x_clkdm = { .name = "default_ducati_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_DUCATI_CLKDM, .flags = CLKDM_CAN_SWSUP, }; @@ -152,19 +160,11 @@ static struct clockdomain default_ducati_816x_clkdm = { static struct clockdomain default_pci_816x_clkdm = { .name = "default_pci_clkdm", .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, + .cm_inst = TI81XX_CM_DEFAULT_MOD, .clkdm_offs = TI816X_CM_DEFAULT_PCI_CLKDM, .flags = CLKDM_CAN_SWSUP, }; -static struct clockdomain default_l3_slow_816x_clkdm = { - .name = "default_l3_slow_clkdm", - .pwrdm = { .name = "default_pwrdm" }, - .cm_inst = TI816X_CM_DEFAULT_MOD, - .clkdm_offs = TI816X_CM_DEFAULT_L3_SLOW_CLKDM, - .flags = CLKDM_CAN_SWSUP, -}; - static struct clockdomain *clockdomains_ti814x[] __initdata = { &alwon_l3_slow_81xx_clkdm, &alwon_l3_med_81xx_clkdm, @@ -172,6 +172,7 @@ static struct clockdomain *clockdomains_ti814x[] __initdata = { &alwon_ethernet_81xx_clkdm, &mmu_81xx_clkdm, &mmu_cfg_81xx_clkdm, + &default_l3_slow_81xx_clkdm, NULL, }; @@ -198,7 +199,7 @@ static struct clockdomain *clockdomains_ti816x[] __initdata = { &default_l3_med_816x_clkdm, &default_ducati_816x_clkdm, &default_pci_816x_clkdm, - &default_l3_slow_816x_clkdm, + &default_l3_slow_81xx_clkdm, NULL, }; diff --git a/arch/arm/mach-omap2/cm81xx.h b/arch/arm/mach-omap2/cm81xx.h index 45cb407da222..3a0ccf07c76f 100644 --- a/arch/arm/mach-omap2/cm81xx.h +++ b/arch/arm/mach-omap2/cm81xx.h @@ -18,15 +18,15 @@ #define __ARCH_ARM_MACH_OMAP2_CM_TI81XX_H /* TI81XX common CM module offsets */ +#define TI81XX_CM_ACTIVE_MOD 0x0400 /* 256B */ +#define TI81XX_CM_DEFAULT_MOD 0x0500 /* 256B */ #define TI81XX_CM_ALWON_MOD 0x1400 /* 1KB */ +#define TI81XX_CM_SGX_MOD 0x0900 /* 256B */ /* TI816X CM module offsets */ -#define TI816X_CM_ACTIVE_MOD 0x0400 /* 256B */ -#define TI816X_CM_DEFAULT_MOD 0x0500 /* 256B */ #define TI816X_CM_IVAHD0_MOD 0x0600 /* 256B */ #define TI816X_CM_IVAHD1_MOD 0x0700 /* 256B */ #define TI816X_CM_IVAHD2_MOD 0x0800 /* 256B */ -#define TI816X_CM_SGX_MOD 0x0900 /* 256B */ /* ALWON */ #define TI81XX_CM_ALWON_L3_SLOW_CLKDM 0x0000 diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9374da313e8e..9cda974a3009 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -94,22 +94,6 @@ static inline void omap_init_mbox(void) { } static inline void omap_init_sti(void) {} -#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) - -static struct platform_device omap_pcm = { - .name = "omap-pcm-audio", - .id = -1, -}; - -static void omap_init_audio(void) -{ - platform_device_register(&omap_pcm); -} - -#else -static inline void omap_init_audio(void) {} -#endif - #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) #include <linux/platform_data/spi-omap2-mcspi.h> @@ -239,13 +223,12 @@ static int __init omap2_init_devices(void) if (!of_have_populated_dt()) pinctrl_provide_dummies(); - /* - * please keep these calls, and their implementations above, - * in alphabetical order so they're easier to sort through. - */ - omap_init_audio(); /* If dtb is there, the devices will be created dynamically */ if (!of_have_populated_dt()) { + /* + * please keep these calls, and their implementations above, + * in alphabetical order so they're easier to sort through. + */ omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 8a2ae82cb227..d85c24918c17 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -488,6 +488,7 @@ void __init omap3xxx_check_revision(void) } break; case 0xb8f2: + case 0xb968: switch (rev) { case 0: /* FALLTHROUGH */ @@ -511,7 +512,8 @@ void __init omap3xxx_check_revision(void) /* Unknown default to latest silicon rev as default */ omap_revision = OMAP3630_REV_ES1_2; cpu_rev = "1.2"; - pr_warn("Warning: unknown chip type; assuming OMAP3630ES1.2\n"); + pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n", + hawkeye); } sprintf(soc_rev, "ES%s", cpu_rev); } diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c deleted file mode 100644 index 8867eb4025bf..000000000000 --- a/arch/arm/mach-omap2/omap-iommu.c +++ /dev/null @@ -1,66 +0,0 @@ -/* - * omap iommu: omap device registration - * - * Copyright (C) 2008-2009 Nokia Corporation - * - * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include <linux/platform_data/iommu-omap.h> -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static int __init omap_iommu_dev_init(struct omap_hwmod *oh, void *unused) -{ - struct platform_device *pdev; - struct iommu_platform_data *pdata; - struct omap_mmu_dev_attr *a = (struct omap_mmu_dev_attr *)oh->dev_attr; - static int i; - - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - pdata->name = oh->name; - pdata->nr_tlb_entries = a->nr_tlb_entries; - - if (oh->rst_lines_cnt == 1) { - pdata->reset_name = oh->rst_lines->name; - pdata->assert_reset = omap_device_assert_hardreset; - pdata->deassert_reset = omap_device_deassert_hardreset; - } - - pdev = omap_device_build("omap-iommu", i, oh, pdata, sizeof(*pdata)); - - kfree(pdata); - - if (IS_ERR(pdev)) { - pr_err("%s: device build err: %ld\n", __func__, PTR_ERR(pdev)); - return PTR_ERR(pdev); - } - - i++; - - return 0; -} - -static int __init omap_iommu_init(void) -{ - /* If dtb is there, the devices will be created dynamically */ - if (of_have_populated_dt()) - return -ENODEV; - - return omap_hwmod_for_each_by_class("mmu", omap_iommu_dev_init, NULL); -} -omap_subsys_initcall(omap_iommu_init); -/* must be ready before omap3isp is probed */ diff --git a/arch/arm/mach-omap2/omap2-restart.c b/arch/arm/mach-omap2/omap2-restart.c index d937b2e4040b..497269db882b 100644 --- a/arch/arm/mach-omap2/omap2-restart.c +++ b/arch/arm/mach-omap2/omap2-restart.c @@ -62,4 +62,4 @@ static int __init omap2xxx_common_look_up_clks_for_reset(void) return 0; } -omap_core_initcall(omap2xxx_common_look_up_clks_for_reset); +omap_postcore_initcall(omap2xxx_common_look_up_clks_for_reset); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 72ebc4c16bae..3750ed14f8c5 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -869,7 +869,7 @@ static int __init omap_device_init(void) bus_register_notifier(&platform_bus_type, &platform_nb); return 0; } -omap_core_initcall(omap_device_init); +omap_postcore_initcall(omap_device_init); /** * omap_device_late_idle - idle devices without drivers diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 48495ad82aba..e9f65fec55c0 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3313,7 +3313,7 @@ static int __init omap_hwmod_setup_all(void) return 0; } -omap_core_initcall(omap_hwmod_setup_all); +omap_postcore_initcall(omap_hwmod_setup_all); /** * omap_hwmod_enable - enable an omap_hwmod diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index aff78d5198d2..0a985325cd64 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -25,7 +25,6 @@ #include "l4_3xxx.h" #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> #include "soc.h" @@ -2957,80 +2956,40 @@ static struct omap_hwmod_class omap3xxx_mmu_hwmod_class = { }; /* mmu isp */ - -static struct omap_mmu_dev_attr mmu_isp_dev_attr = { - .nr_tlb_entries = 8, -}; - static struct omap_hwmod omap3xxx_mmu_isp_hwmod; -static struct omap_hwmod_irq_info omap3xxx_mmu_isp_irqs[] = { - { .irq = 24 + OMAP_INTC_START, }, - { .irq = -1 } -}; - -static struct omap_hwmod_addr_space omap3xxx_mmu_isp_addrs[] = { - { - .pa_start = 0x480bd400, - .pa_end = 0x480bd47f, - .flags = ADDR_TYPE_RT, - }, - { } -}; /* l4_core -> mmu isp */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmu_isp = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mmu_isp_hwmod, - .addr = omap3xxx_mmu_isp_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod omap3xxx_mmu_isp_hwmod = { .name = "mmu_isp", .class = &omap3xxx_mmu_hwmod_class, - .mpu_irqs = omap3xxx_mmu_isp_irqs, .main_clk = "cam_ick", - .dev_attr = &mmu_isp_dev_attr, .flags = HWMOD_NO_IDLEST, }; /* mmu iva */ -static struct omap_mmu_dev_attr mmu_iva_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap3xxx_mmu_iva_hwmod; -static struct omap_hwmod_irq_info omap3xxx_mmu_iva_irqs[] = { - { .irq = 28 + OMAP_INTC_START, }, - { .irq = -1 } -}; static struct omap_hwmod_rst_info omap3xxx_mmu_iva_resets[] = { { .name = "mmu", .rst_shift = 1, .st_shift = 9 }, }; -static struct omap_hwmod_addr_space omap3xxx_mmu_iva_addrs[] = { - { - .pa_start = 0x5d000000, - .pa_end = 0x5d00007f, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l3_main -> iva mmu */ static struct omap_hwmod_ocp_if omap3xxx_l3_main__mmu_iva = { .master = &omap3xxx_l3_main_hwmod, .slave = &omap3xxx_mmu_iva_hwmod, - .addr = omap3xxx_mmu_iva_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { .name = "mmu_iva", .class = &omap3xxx_mmu_hwmod_class, - .mpu_irqs = omap3xxx_mmu_iva_irqs, .clkdm_name = "iva2_clkdm", .rst_lines = omap3xxx_mmu_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_mmu_iva_resets), @@ -3043,7 +3002,6 @@ static struct omap_hwmod omap3xxx_mmu_iva_hwmod = { .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, }, }, - .dev_attr = &mmu_iva_dev_attr, .flags = HWMOD_NO_IDLEST, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index a5e444b1e57a..dad871a4cd96 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -30,7 +30,6 @@ #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <linux/platform_data/iommu-omap.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" @@ -2088,30 +2087,16 @@ static struct omap_hwmod_class omap44xx_mmu_hwmod_class = { /* mmu ipu */ -static struct omap_mmu_dev_attr mmu_ipu_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap44xx_mmu_ipu_hwmod; static struct omap_hwmod_rst_info omap44xx_mmu_ipu_resets[] = { { .name = "mmu_cache", .rst_shift = 2 }, }; -static struct omap_hwmod_addr_space omap44xx_mmu_ipu_addrs[] = { - { - .pa_start = 0x55082000, - .pa_end = 0x550820ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l3_main_2 -> mmu_ipu */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__mmu_ipu = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_mmu_ipu_hwmod, .clk = "l3_div_ck", - .addr = omap44xx_mmu_ipu_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2130,35 +2115,20 @@ static struct omap_hwmod omap44xx_mmu_ipu_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .dev_attr = &mmu_ipu_dev_attr, }; /* mmu dsp */ -static struct omap_mmu_dev_attr mmu_dsp_dev_attr = { - .nr_tlb_entries = 32, -}; - static struct omap_hwmod omap44xx_mmu_dsp_hwmod; static struct omap_hwmod_rst_info omap44xx_mmu_dsp_resets[] = { { .name = "mmu_cache", .rst_shift = 1 }, }; -static struct omap_hwmod_addr_space omap44xx_mmu_dsp_addrs[] = { - { - .pa_start = 0x4a066000, - .pa_end = 0x4a0660ff, - .flags = ADDR_TYPE_RT, - }, - { } -}; - /* l4_cfg -> dsp */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mmu_dsp = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_mmu_dsp_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_mmu_dsp_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2177,7 +2147,6 @@ static struct omap_hwmod omap44xx_mmu_dsp_hwmod = { .modulemode = MODULEMODE_HWCTRL, }, }, - .dev_attr = &mmu_dsp_dev_attr, }; /* @@ -3915,21 +3884,11 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space omap44xx_elm_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078fff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l4_per -> elm */ static struct omap_hwmod_ocp_if omap44xx_l4_per__elm = { .master = &omap44xx_l4_per_hwmod, .slave = &omap44xx_elm_hwmod, .clk = "l4_div_ck", - .addr = omap44xx_elm_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index ee4e04434a94..848356e38b74 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2103,7 +2103,7 @@ static struct omap_hwmod dra7xx_uart4_hwmod = { .class = &dra7xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", .main_clk = "uart4_gfclk_mux", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = HWMOD_SWSUP_SIDLE_ACT | DEBUG_OMAP4UART4_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DRA7XX_CM_L4PER_UART4_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index 1b96cdfd1558..e493ae372910 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -104,8 +104,8 @@ * The default .clkctrl_offs field is offset from CM_DEFAULT, that's * TRM 18.7.6 CM_DEFAULT device register values minus 0x500 */ -#define DM816X_CM_DEFAULT_OFFSET 0x500 -#define DM816X_CM_DEFAULT_USB_CLKCTRL (0x558 - DM816X_CM_DEFAULT_OFFSET) +#define DM81XX_CM_DEFAULT_OFFSET 0x500 +#define DM81XX_CM_DEFAULT_USB_CLKCTRL (0x558 - DM81XX_CM_DEFAULT_OFFSET) /* L3 Interconnect entries clocked at 125, 250 and 500MHz */ static struct omap_hwmod dm81xx_alwon_l3_slow_hwmod = { @@ -557,22 +557,42 @@ static struct omap_hwmod_class dm81xx_usbotg_class = { .sysc = &dm81xx_usbhsotg_sysc, }; -static struct omap_hwmod dm81xx_usbss_hwmod = { +static struct omap_hwmod dm814x_usbss_hwmod = { + .name = "usb_otg_hs", + .clkdm_name = "default_l3_slow_clkdm", + .main_clk = "pll260dcoclkldo", /* 481c5260.adpll.dcoclkldo */ + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .class = &dm81xx_usbotg_class, +}; + +static struct omap_hwmod_ocp_if dm814x_default_l3_slow__usbss = { + .master = &dm81xx_default_l3_slow_hwmod, + .slave = &dm814x_usbss_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, +}; + +static struct omap_hwmod dm816x_usbss_hwmod = { .name = "usb_otg_hs", .clkdm_name = "default_l3_slow_clkdm", .main_clk = "sysclk6_ck", .prcm = { .omap4 = { - .clkctrl_offs = DM816X_CM_DEFAULT_USB_CLKCTRL, + .clkctrl_offs = DM81XX_CM_DEFAULT_USB_CLKCTRL, .modulemode = MODULEMODE_SWCTRL, }, }, .class = &dm81xx_usbotg_class, }; -static struct omap_hwmod_ocp_if dm81xx_default_l3_slow__usbss = { +static struct omap_hwmod_ocp_if dm816x_default_l3_slow__usbss = { .master = &dm81xx_default_l3_slow_hwmod, - .slave = &dm81xx_usbss_hwmod, + .slave = &dm816x_usbss_hwmod, .clk = "sysclk6_ck", .user = OCP_USER_MPU, }; @@ -912,7 +932,7 @@ static struct omap_hwmod_ocp_if dm816x_l4_hs__emac1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = { +static struct omap_hwmod_class_sysconfig dm81xx_mmc_sysc = { .rev_offs = 0x0, .sysc_offs = 0x110, .syss_offs = 0x114, @@ -923,24 +943,94 @@ static struct omap_hwmod_class_sysconfig dm816x_mmc_sysc = { .sysc_fields = &omap_hwmod_sysc_type1, }; -static struct omap_hwmod_class dm816x_mmc_class = { +static struct omap_hwmod_class dm81xx_mmc_class = { .name = "mmc", - .sysc = &dm816x_mmc_sysc, + .sysc = &dm81xx_mmc_sysc, }; -static struct omap_hwmod_opt_clk dm816x_mmc1_opt_clks[] = { +static struct omap_hwmod_opt_clk dm81xx_mmc_opt_clks[] = { { .role = "dbck", .clk = "sysclk18_ck", }, }; -static struct omap_hsmmc_dev_attr mmc1_dev_attr = { - .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, +static struct omap_hsmmc_dev_attr mmc_dev_attr = { +}; + +static struct omap_hwmod dm814x_mmc1_hwmod = { + .name = "mmc1", + .clkdm_name = "alwon_l3s_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_0_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc1 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_mmc1_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod dm814x_mmc2_hwmod = { + .name = "mmc2", + .clkdm_name = "alwon_l3s_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_1_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_l4_ls__mmc2 = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm814x_mmc2_hwmod, + .clk = "sysclk6_ck", + .user = OCP_USER_MPU, + .flags = OMAP_FIREWALL_L4 +}; + +static struct omap_hwmod dm814x_mmc3_hwmod = { + .name = "mmc3", + .clkdm_name = "alwon_l3_med_clkdm", + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), + .main_clk = "sysclk8_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM814X_CM_ALWON_MMCHS_2_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, +}; + +static struct omap_hwmod_ocp_if dm814x_alwon_l3_med__mmc3 = { + .master = &dm81xx_alwon_l3_med_hwmod, + .slave = &dm814x_mmc3_hwmod, + .clk = "sysclk4_ck", + .user = OCP_USER_MPU, }; static struct omap_hwmod dm816x_mmc1_hwmod = { .name = "mmc1", .clkdm_name = "alwon_l3s_clkdm", - .opt_clks = dm816x_mmc1_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(dm816x_mmc1_opt_clks), + .opt_clks = dm81xx_mmc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dm81xx_mmc_opt_clks), .main_clk = "sysclk10_ck", .prcm = { .omap4 = { @@ -948,8 +1038,8 @@ static struct omap_hwmod dm816x_mmc1_hwmod = { .modulemode = MODULEMODE_SWCTRL, }, }, - .dev_attr = &mmc1_dev_attr, - .class = &dm816x_mmc_class, + .dev_attr = &mmc_dev_attr, + .class = &dm81xx_mmc_class, }; static struct omap_hwmod_ocp_if dm816x_l4_ls__mmc1 = { @@ -1036,6 +1126,40 @@ static struct omap_hwmod_ocp_if dm81xx_l4_ls__mailbox = { .user = OCP_USER_MPU, }; +static struct omap_hwmod_class_sysconfig dm81xx_spinbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE, + .idlemodes = SIDLE_FORCE | SIDLE_NO | SIDLE_SMART, + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class dm81xx_spinbox_hwmod_class = { + .name = "spinbox", + .sysc = &dm81xx_spinbox_sysc, +}; + +static struct omap_hwmod dm81xx_spinbox_hwmod = { + .name = "spinbox", + .clkdm_name = "alwon_l3s_clkdm", + .class = &dm81xx_spinbox_hwmod_class, + .main_clk = "sysclk6_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = DM81XX_CM_ALWON_SPINBOX_CLKCTRL, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + +static struct omap_hwmod_ocp_if dm81xx_l4_ls__spinbox = { + .master = &dm81xx_l4_ls_hwmod, + .slave = &dm81xx_spinbox_hwmod, + .user = OCP_USER_MPU, +}; + static struct omap_hwmod_class dm81xx_tpcc_hwmod_class = { .name = "tpcc", }; @@ -1231,8 +1355,6 @@ static struct omap_hwmod_ocp_if dm81xx_tptc3__alwon_l3_fast = { /* * REVISIT: Test and enable the following once clocks work: * dm81xx_l4_ls__mailbox - * dm81xx_alwon_l3_slow__gpmc - * dm81xx_default_l3_slow__usbss * * Also note that some devices share a single clkctrl_offs.. * For example, i2c1 and 3 share one, and i2c2 and 4 share one. @@ -1252,6 +1374,8 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm81xx_l4_ls__gpio2, &dm81xx_l4_ls__elm, &dm81xx_l4_ls__mcspi1, + &dm814x_l4_ls__mmc1, + &dm814x_l4_ls__mmc2, &dm81xx_alwon_l3_fast__tpcc, &dm81xx_alwon_l3_fast__tptc0, &dm81xx_alwon_l3_fast__tptc1, @@ -1265,6 +1389,9 @@ static struct omap_hwmod_ocp_if *dm814x_hwmod_ocp_ifs[] __initdata = { &dm814x_l4_ls__timer2, &dm814x_l4_hs__cpgmac0, &dm814x_cpgmac0__mdio, + &dm81xx_alwon_l3_slow__gpmc, + &dm814x_default_l3_slow__usbss, + &dm814x_alwon_l3_med__mmc3, NULL, }; @@ -1298,6 +1425,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm816x_l4_ls__timer7, &dm81xx_l4_ls__mcspi1, &dm81xx_l4_ls__mailbox, + &dm81xx_l4_ls__spinbox, &dm81xx_l4_hs__emac0, &dm81xx_emac0__mdio, &dm816x_l4_hs__emac1, @@ -1311,7 +1439,7 @@ static struct omap_hwmod_ocp_if *dm816x_hwmod_ocp_ifs[] __initdata = { &dm81xx_tptc2__alwon_l3_fast, &dm81xx_tptc3__alwon_l3_fast, &dm81xx_alwon_l3_slow__gpmc, - &dm81xx_default_l3_slow__usbss, + &dm816x_default_l3_slow__usbss, NULL, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 58144779dec4..e097055398de 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -265,7 +265,7 @@ static void __init nokia_n900_legacy_init(void) pr_warn("Thumb binaries may crash randomly without this workaround\n"); } - pr_info("RX-51: Registring OMAP3 HWRNG device\n"); + pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); } diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index 2e00c7f1f471..eb27ae066292 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -384,14 +384,14 @@ static struct powerdomain isp_814x_pwrdm = { .voltdm = { .name = "core" }, }; -static struct powerdomain active_816x_pwrdm = { +static struct powerdomain active_81xx_pwrdm = { .name = "active_pwrdm", .prcm_offs = TI816X_PRM_ACTIVE_MOD, .pwrsts = PWRSTS_OFF_ON, .voltdm = { .name = "core" }, }; -static struct powerdomain default_816x_pwrdm = { +static struct powerdomain default_81xx_pwrdm = { .name = "default_pwrdm", .prcm_offs = TI81XX_PRM_DEFAULT_MOD, .pwrsts = PWRSTS_OFF_ON, @@ -486,6 +486,8 @@ static struct powerdomain *powerdomains_am35x[] __initdata = { static struct powerdomain *powerdomains_ti814x[] __initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, + &active_81xx_pwrdm, + &default_81xx_pwrdm, &gem_814x_pwrdm, &ivahd_814x_pwrdm, &hdvpss_814x_pwrdm, @@ -497,8 +499,8 @@ static struct powerdomain *powerdomains_ti814x[] __initdata = { static struct powerdomain *powerdomains_ti816x[] __initdata = { &alwon_81xx_pwrdm, &device_81xx_pwrdm, - &active_816x_pwrdm, - &default_816x_pwrdm, + &active_81xx_pwrdm, + &default_81xx_pwrdm, &ivahd0_816x_pwrdm, &ivahd1_816x_pwrdm, &ivahd2_816x_pwrdm, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 5fb50fe54153..f164c6b32ce2 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -213,7 +213,7 @@ static int __init omap_serial_early_init(void) return 0; } -omap_core_initcall(omap_serial_early_init); +omap_postcore_initcall(omap_serial_early_init); /** * omap_serial_init_port() - initialize single serial port diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index f86692dbcfd5..5b385bb8aff9 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -194,8 +194,8 @@ static struct device_node * __init omap_get_timer_dt(const struct of_device_id * /** * omap_dmtimer_init - initialisation function when device tree is used * - * For secure OMAP3 devices, timers with device type "timer-secure" cannot - * be used by the kernel as they are reserved. Therefore, to prevent the + * For secure OMAP3/DRA7xx devices, timers with device type "timer-secure" + * cannot be used by the kernel as they are reserved. Therefore, to prevent the * kernel registering these devices remove them dynamically from the device * tree on boot. */ @@ -203,7 +203,7 @@ static void __init omap_dmtimer_init(void) { struct device_node *np; - if (!cpu_is_omap34xx()) + if (!cpu_is_omap34xx() && !soc_is_dra7xx()) return; /* If we are a secure device, remove any secure timer nodes */ diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 938888fc55a1..d42a07e33482 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -42,6 +42,7 @@ static int ncores; #define PMU_PWRDN_SCU 4 static struct regmap *pmu; +static int has_pmu = true; static int pmu_power_domain_is_on(int pd) { @@ -89,20 +90,23 @@ static int pmu_set_power_domain(int pd, bool on) if (!IS_ERR(rstc) && !on) reset_control_assert(rstc); - ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val); - if (ret < 0) { - pr_err("%s: could not update power domain\n", __func__); - return ret; - } - - ret = -1; - while (ret != on) { - ret = pmu_power_domain_is_on(pd); + if (has_pmu) { + ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val); if (ret < 0) { - pr_err("%s: could not read power domain state\n", + pr_err("%s: could not update power domain\n", __func__); return ret; } + + ret = -1; + while (ret != on) { + ret = pmu_power_domain_is_on(pd); + if (ret < 0) { + pr_err("%s: could not read power domain state\n", + __func__); + return ret; + } + } } if (!IS_ERR(rstc)) { @@ -122,7 +126,7 @@ static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret; - if (!sram_base_addr || !pmu) { + if (!sram_base_addr || (has_pmu && !pmu)) { pr_err("%s: sram or pmu missing for cpu boot\n", __func__); return -ENXIO; } @@ -275,7 +279,7 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) return; } - if (rockchip_smp_prepare_pmu()) + if (has_pmu && rockchip_smp_prepare_pmu()) return; if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) { @@ -318,6 +322,13 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } +static void __init rk3036_smp_prepare_cpus(unsigned int max_cpus) +{ + has_pmu = false; + + rockchip_smp_prepare_cpus(max_cpus); +} + #ifdef CONFIG_HOTPLUG_CPU static int rockchip_cpu_kill(unsigned int cpu) { @@ -340,6 +351,15 @@ static void rockchip_cpu_die(unsigned int cpu) } #endif +static const struct smp_operations rk3036_smp_ops __initconst = { + .smp_prepare_cpus = rk3036_smp_prepare_cpus, + .smp_boot_secondary = rockchip_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = rockchip_cpu_kill, + .cpu_die = rockchip_cpu_die, +#endif +}; + static const struct smp_operations rockchip_smp_ops __initconst = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, @@ -349,4 +369,5 @@ static const struct smp_operations rockchip_smp_ops __initconst = { #endif }; +CPU_METHOD_OF_DECLARE(rk3036_smp, "rockchip,rk3036-smp", &rk3036_smp_ops); CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index 251c7b9c5f9b..3f07cc5dfe5f 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -82,6 +82,7 @@ static const char * const rockchip_board_dt_compat[] = { "rockchip,rk3066a", "rockchip,rk3066b", "rockchip,rk3188", + "rockchip,rk3228", "rockchip,rk3288", NULL, }; diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig new file mode 100644 index 000000000000..d6a3714b096e --- /dev/null +++ b/arch/arm/mach-tango/Kconfig @@ -0,0 +1,12 @@ +config ARCH_TANGO + bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + # Cortex-A9 MPCore r3p0, PL310 r3p2 + select ARCH_HAS_HOLES_MEMORYMODEL + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 + select ARM_GIC + select CLKSRC_TANGO_XTAL + select HAVE_ARM_SCU + select HAVE_ARM_TWD + select TANGO_IRQ diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile new file mode 100644 index 000000000000..f33935e42e77 --- /dev/null +++ b/arch/arm/mach-tango/Makefile @@ -0,0 +1,5 @@ +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec) + +obj-y += setup.o smc.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c new file mode 100644 index 000000000000..a18d5a34e2f5 --- /dev/null +++ b/arch/arm/mach-tango/platsmp.c @@ -0,0 +1,16 @@ +#include <linux/init.h> +#include <linux/smp.h> +#include "smc.h" + +static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + tango_set_aux_boot_addr(virt_to_phys(secondary_startup)); + tango_start_aux_core(cpu); + return 0; +} + +static struct smp_operations tango_smp_ops __initdata = { + .smp_boot_secondary = tango_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops); diff --git a/arch/arm/mach-tango/setup.c b/arch/arm/mach-tango/setup.c new file mode 100644 index 000000000000..f14b6c7d255b --- /dev/null +++ b/arch/arm/mach-tango/setup.c @@ -0,0 +1,17 @@ +#include <asm/mach/arch.h> +#include <asm/hardware/cache-l2x0.h> +#include "smc.h" + +static void tango_l2c_write(unsigned long val, unsigned int reg) +{ + if (reg == L2X0_CTRL) + tango_set_l2_control(val); +} + +static const char *const tango_dt_compat[] = { "sigma,tango4", NULL }; + +DT_MACHINE_START(TANGO_DT, "Sigma Tango DT") + .dt_compat = tango_dt_compat, + .l2c_aux_mask = ~0, + .l2c_write_sec = tango_l2c_write, +MACHINE_END diff --git a/arch/arm/mach-tango/smc.S b/arch/arm/mach-tango/smc.S new file mode 100644 index 000000000000..5d932ce3c1bd --- /dev/null +++ b/arch/arm/mach-tango/smc.S @@ -0,0 +1,9 @@ +#include <linux/linkage.h> + +ENTRY(tango_smc) + push {lr} + mov ip, r1 + dsb /* This barrier is probably unnecessary */ + smc #0 + pop {pc} +ENDPROC(tango_smc) diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h new file mode 100644 index 000000000000..7a4af35cc390 --- /dev/null +++ b/arch/arm/mach-tango/smc.h @@ -0,0 +1,5 @@ +extern int tango_smc(unsigned int val, unsigned int service); + +#define tango_set_l2_control(val) tango_smc(val, 0x102) +#define tango_start_aux_core(val) tango_smc(val, 0x104) +#define tango_set_aux_boot_addr(val) tango_smc((unsigned int)val, 0x105) diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index b640458fd757..82dddee3a469 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -6,6 +6,7 @@ config ARCH_UNIPHIER select ARM_GIC select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP + select PINCTRL help Support for UniPhier SoC family developed by Socionext Inc. (formerly, System LSI Business Division of Panasonic Corporation) diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index f287667e4fc5..fd0aeeb09881 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,6 +1,7 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 8ca94d379bc3..7a327bd32521 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -36,6 +36,7 @@ */ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/module.h> #include <linux/io.h> #include <linux/device.h> @@ -137,6 +138,31 @@ static int omap_dm_timer_reset(struct omap_dm_timer *timer) return 0; } +static int omap_dm_timer_of_set_source(struct omap_dm_timer *timer) +{ + int ret; + struct clk *parent; + + /* + * FIXME: OMAP1 devices do not use the clock framework for dmtimers so + * do not call clk_get() for these devices. + */ + if (!timer->fclk) + return -ENODEV; + + parent = clk_get(&timer->pdev->dev, NULL); + if (IS_ERR(parent)) + return -ENODEV; + + ret = clk_set_parent(timer->fclk, parent); + if (ret < 0) + pr_err("%s: failed to set parent\n", __func__); + + clk_put(parent); + + return ret; +} + static int omap_dm_timer_prepare(struct omap_dm_timer *timer) { int rc; @@ -166,7 +192,11 @@ static int omap_dm_timer_prepare(struct omap_dm_timer *timer) __omap_dm_timer_enable_posted(timer); omap_dm_timer_disable(timer); - return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + rc = omap_dm_timer_of_set_source(timer); + if (rc == -ENODEV) + return omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); + + return rc; } static inline u32 omap_dm_timer_reserved_systimer(int id) @@ -504,6 +534,12 @@ int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) if (IS_ERR(timer->fclk)) return -EINVAL; +#if defined(CONFIG_COMMON_CLK) + /* Check if the clock has configurable parents */ + if (clk_hw_get_num_parents(__clk_get_hw(timer->fclk)) < 2) + return 0; +#endif + switch (source) { case OMAP_TIMER_SRC_SYS_CLK: parent_name = "timer_sys_ck"; @@ -943,6 +979,10 @@ static const struct of_device_id omap_timer_match[] = { .compatible = "ti,am335x-timer-1ms", .data = &omap3plus_pdata, }, + { + .compatible = "ti,dm816-timer", + .data = &omap3plus_pdata, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_timer_match); |