diff options
Diffstat (limited to 'arch/arm')
56 files changed, 538 insertions, 345 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 37c0f4e978d4..43594d5116ef 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -20,7 +20,6 @@ config ARM select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HARDIRQS_SW_RESEND - select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_SECCOMP_FILTER @@ -218,7 +217,8 @@ config VECTORS_BASE default DRAM_BASE if REMAP_VECTORS_TO_RAM default 0x00000000 help - The base address of exception vectors. + The base address of exception vectors. This must be two pages + in size. config ARM_PATCH_PHYS_VIRT bool "Patch physical to virtual translations at runtime" if EMBEDDED diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index e401a766c0bd..583f4a00ec32 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE config DEBUG_UNCOMPRESS bool - default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ - !DEBUG_OMAP2PLUS_UART && \ + depends on ARCH_MULTIPLATFORM + default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ !DEBUG_TEGRA_UART + help + This option influences the normal decompressor output for + multiplatform kernels. Normally, multiplatform kernels disable + decompressor output because it is not possible to know where to + send the decompressor output. + + When this option is set, the selected DEBUG_LL output method + will be re-used for normal decompressor output on multiplatform + kernels. + config UNCOMPRESS_INCLUDE string diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c0ac0f5e5e5c..6fd2ceae305a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_DOVE) += dove machine-$(CONFIG_ARCH_EBSA110) += ebsa110 machine-$(CONFIG_ARCH_EP93XX) += ep93xx +machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_INTEGRATOR) += integrator @@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX) += iop13xx machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx +machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 +machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx machine-$(CONFIG_ARCH_MXS) += mxs -machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik machine-$(CONFIG_ARCH_NSPIRE) += nspire @@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell -machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_PXA) += pxa machine-$(CONFIG_ARCH_REALVIEW) += realview machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip @@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 -machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHARK) += shark machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_SIRF) += prima2 +machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_STI) += sti +machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress +machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 +machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_FOOTBRIDGE) += footbridge -machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_PLAT_SPEAR) += spear -machine-$(CONFIG_ARCH_STI) += sti -machine-$(CONFIG_ARCH_VIRT) += virt -machine-$(CONFIG_ARCH_ZYNQ) += zynq -machine-$(CONFIG_ARCH_SUNXI) += sunxi -machine-$(CONFIG_ARCH_KEYSTONE) += keystone # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts index db2060c46540..9c1167b0459b 100644 --- a/arch/arm/boot/dts/msm8960-cdp.dts +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -26,7 +26,7 @@ cpu-offset = <0x80000>; }; - msmgpio: gpio@fd510000 { + msmgpio: gpio@800000 { compatible = "qcom,msm-gpio"; gpio-controller; #gpio-cells = <2>; @@ -34,7 +34,7 @@ interrupts = <0 32 0x4>; interrupt-controller; #interrupt-cells = <2>; - reg = <0xfd510000 0x4000>; + reg = <0x800000 0x4000>; }; serial@16440000 { diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 08b72678abff..65d7b601651c 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -235,7 +235,7 @@ }; &mmc1 { - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&ldo9_reg>; bus-width = <4>; }; @@ -282,6 +282,7 @@ regulators { smps123_reg: smps123 { + /* VDD_OPP_MPU */ regulator-name = "smps123"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; @@ -290,6 +291,7 @@ }; smps45_reg: smps45 { + /* VDD_OPP_MM */ regulator-name = "smps45"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -298,6 +300,7 @@ }; smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -306,6 +309,7 @@ }; smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ regulator-name = "smps7"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -314,6 +318,7 @@ }; smps8_reg: smps8 { + /* VDD_OPP_CORE */ regulator-name = "smps8"; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1310000>; @@ -322,15 +327,15 @@ }; smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ regulator-name = "smps9"; regulator-min-microvolt = <2100000>; regulator-max-microvolt = <2100000>; - regulator-always-on; - regulator-boot-on; ti,smps-range = <0x80>; }; smps10_reg: smps10 { + /* VBUS_5V_OTG */ regulator-name = "smps10"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -339,38 +344,40 @@ }; ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ regulator-name = "ldo1"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ regulator-name = "ldo2"; - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <2900000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; }; ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ regulator-name = "ldo3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; }; ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ regulator-name = "ldo5"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -379,38 +386,43 @@ }; ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ regulator-name = "ldo6"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; }; ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ regulator-name = "ldo7"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; }; ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ regulator-name = "ldo8"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; regulator-boot-on; + /* Unused */ + status = "disabled"; }; ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ regulator-name = "ldo9"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-max-microvolt = <3000000>; regulator-boot-on; }; ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ regulator-name = "ldoln"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -419,12 +431,20 @@ }; ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ regulator-name = "ldousb"; regulator-min-microvolt = <3250000>; regulator-max-microvolt = <3250000>; regulator-always-on; regulator-boot-on; }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index 7321403cab8a..f5b9898d9c6e 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -6,10 +6,12 @@ #address-cells = <1>; #size-cells = <0>; cpu@0 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; cpu@1 { + device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; }; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 2fcb3f2ca160..5592be6f2f7a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -457,6 +457,7 @@ }; usb-phy@c5004000 { + status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h deleted file mode 100644 index 92f10cb5c70c..000000000000 --- a/arch/arm/include/asm/a.out-core.h +++ /dev/null @@ -1,45 +0,0 @@ -/* a.out coredump register dumper - * - * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_A_OUT_CORE_H -#define _ASM_A_OUT_CORE_H - -#ifdef __KERNEL__ - -#include <linux/user.h> -#include <linux/elfcore.h> - -/* - * fill in the user structure for an a.out core dump - */ -static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump) -{ - struct task_struct *tsk = current; - - dump->magic = CMAGIC; - dump->start_code = tsk->mm->start_code; - dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1); - - dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT; - dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT; - dump->u_ssize = 0; - - memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg)); - - if (dump->start_stack < 0x04000000) - dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT; - - dump->regs = *regs; - dump->u_fpvalid = dump_fpu (regs, &dump->u_fp); -} - -#endif /* __KERNEL__ */ -#endif /* _ASM_A_OUT_CORE_H */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 8c25dc4e9851..9672e978d50d 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -89,13 +89,18 @@ extern unsigned int processor_id; __val; \ }) +/* + * The memory clobber prevents gcc 4.5 from reordering the mrc before + * any is_smp() tests, which can cause undefined instruction aborts on + * ARM1136 r0 due to the missing extended CP15 registers. + */ #define read_cpuid_ext(ext_reg) \ ({ \ unsigned int __val; \ asm("mrc p15, 0, %0, c0, " ext_reg \ : "=r" (__val) \ : \ - : "cc"); \ + : "memory"); \ __val; \ }) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index 38050b1c4800..56211f2084ef 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -130,4 +130,10 @@ struct mm_struct; extern unsigned long arch_randomize_brk(struct mm_struct *mm); #define arch_randomize_brk arch_randomize_brk +#ifdef CONFIG_MMU +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1 +struct linux_binprm; +int arch_setup_additional_pages(struct linux_binprm *, int); +#endif + #endif diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index e3d55547e755..6f18da09668b 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -6,8 +6,11 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID atomic64_t id; +#else + int switch_pending; #endif unsigned int vmalloc_seq; + unsigned long sigpage; } mm_context_t; #ifdef CONFIG_CPU_HAS_ASID diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h index b5792b7fd8d3..9b32f76bb0dd 100644 --- a/arch/arm/include/asm/mmu_context.h +++ b/arch/arm/include/asm/mmu_context.h @@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm, * on non-ASID CPUs, the old mm will remain valid until the * finish_arch_post_lock_switch() call. */ - set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM); + mm->context.switch_pending = 1; else cpu_switch_mm(mm->pgd, mm); } @@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm, finish_arch_post_lock_switch static inline void finish_arch_post_lock_switch(void) { - if (test_and_clear_thread_flag(TIF_SWITCH_MM)) { - struct mm_struct *mm = current->mm; - cpu_switch_mm(mm->pgd, mm); + struct mm_struct *mm = current->mm; + + if (mm && mm->context.switch_pending) { + /* + * Preemption must be disabled during cpu_switch_mm() as we + * have some stateful cache flush implementations. Check + * switch_pending again in case we were preempted and the + * switch to this mm was already done. + */ + preempt_disable(); + if (mm->context.switch_pending) { + mm->context.switch_pending = 0; + cpu_switch_mm(mm->pgd, mm); + } + preempt_enable_no_resched(); } } diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 6363f3d1d505..4355f0ec44d6 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); +#ifdef CONFIG_KUSER_HELPERS #define __HAVE_ARCH_GATE_AREA 1 +#endif #ifdef CONFIG_ARM_LPAE #include <asm/pgtable-3level-types.h> diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 06e7d509eaac..413f3876341c 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -54,7 +54,6 @@ struct thread_struct { #define start_thread(regs,pc,sp) \ ({ \ - unsigned long *stack = (unsigned long *)sp; \ memset(regs->uregs, 0, sizeof(regs->uregs)); \ if (current->personality & ADDR_LIMIT_32BIT) \ regs->ARM_cpsr = USR_MODE; \ @@ -65,9 +64,6 @@ struct thread_struct { regs->ARM_cpsr |= PSR_ENDSTATE; \ regs->ARM_pc = pc & ~1; /* pc */ \ regs->ARM_sp = sp; /* sp */ \ - regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ - regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ - regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ nommu_start_thread(regs); \ }) diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index 214d4158089a..2b8114fcba09 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 -#define TIF_SWITCH_MM 22 /* deferred switch_mm */ #define _TIF_SIGPENDING (1 << TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index fdbb9e369745..f467e9b3f8d5 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void) isb(); } +#include <asm/cputype.h> #ifdef CONFIG_ARM_ERRATA_798181 +static inline int erratum_a15_798181(void) +{ + unsigned int midr = read_cpuid_id(); + + /* Cortex-A15 r0p0..r3p2 affected */ + if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) + return 0; + return 1; +} + static inline void dummy_flush_tlb_a15_erratum(void) { /* @@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void) dsb(); } #else +static inline int erratum_a15_798181(void) +{ + return 0; +} + static inline void dummy_flush_tlb_a15_erratum(void) { } diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index 50af92bac737..4371f45c5784 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -29,6 +29,7 @@ #define BOOT_CPU_MODE_MISMATCH PSR_N_BIT #ifndef __ASSEMBLY__ +#include <asm/cacheflush.h> #ifdef CONFIG_ARM_VIRT_EXT /* @@ -41,10 +42,21 @@ */ extern int __boot_cpu_mode; +static inline void sync_boot_mode(void) +{ + /* + * As secondaries write to __boot_cpu_mode with caches disabled, we + * must flush the corresponding cache entries to ensure the visibility + * of their writes. + */ + sync_cache_r(&__boot_cpu_mode); +} + void __hyp_set_vectors(unsigned long phys_vector_base); unsigned long __hyp_get_vectors(void); #else #define __boot_cpu_mode (SVC_MODE) +#define sync_boot_mode() #endif #ifndef ZIMAGE diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild index 47bcb2d254af..18d76fd5a2af 100644 --- a/arch/arm/include/uapi/asm/Kbuild +++ b/arch/arm/include/uapi/asm/Kbuild @@ -1,7 +1,6 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm -header-y += a.out.h header-y += byteorder.h header-y += fcntl.h header-y += hwcap.h diff --git a/arch/arm/include/uapi/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h deleted file mode 100644 index 083894b2e3bc..000000000000 --- a/arch/arm/include/uapi/asm/a.out.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef __ARM_A_OUT_H__ -#define __ARM_A_OUT_H__ - -#include <linux/personality.h> -#include <linux/types.h> - -struct exec -{ - __u32 a_info; /* Use macros N_MAGIC, etc for access */ - __u32 a_text; /* length of text, in bytes */ - __u32 a_data; /* length of data, in bytes */ - __u32 a_bss; /* length of uninitialized data area for file, in bytes */ - __u32 a_syms; /* length of symbol table data in file, in bytes */ - __u32 a_entry; /* start address */ - __u32 a_trsize; /* length of relocation info for text, in bytes */ - __u32 a_drsize; /* length of relocation info for data, in bytes */ -}; - -/* - * This is always the same - */ -#define N_TXTADDR(a) (0x00008000) - -#define N_TRSIZE(a) ((a).a_trsize) -#define N_DRSIZE(a) ((a).a_drsize) -#define N_SYMSIZE(a) ((a).a_syms) - -#define M_ARM 103 - -#ifndef LIBRARY_START_TEXT -#define LIBRARY_START_TEXT (0x00c00000) -#endif - -#endif /* __A_OUT_GNU_H__ */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index a39cfc2a1f90..d40d0ef389db 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -742,6 +742,18 @@ ENDPROC(__switch_to) #endif .endm + .macro kuser_pad, sym, size + .if (. - \sym) & 3 + .rept 4 - (. - \sym) & 3 + .byte 0 + .endr + .endif + .rept (\size - (. - \sym)) / 4 + .word 0xe7fddef1 + .endr + .endm + +#ifdef CONFIG_KUSER_HELPERS .align 5 .globl __kuser_helper_start __kuser_helper_start: @@ -832,18 +844,13 @@ kuser_cmpxchg64_fixup: #error "incoherent kernel configuration" #endif - /* pad to next slot */ - .rept (16 - (. - __kuser_cmpxchg64)/4) - .word 0 - .endr - - .align 5 + kuser_pad __kuser_cmpxchg64, 64 __kuser_memory_barrier: @ 0xffff0fa0 smp_dmb arm usr_ret lr - .align 5 + kuser_pad __kuser_memory_barrier, 32 __kuser_cmpxchg: @ 0xffff0fc0 @@ -916,13 +923,14 @@ kuser_cmpxchg32_fixup: #endif - .align 5 + kuser_pad __kuser_cmpxchg, 32 __kuser_get_tls: @ 0xffff0fe0 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr mrc p15, 0, r0, c13, c0, 3 @ 0xffff0fe8 hardware TLS code - .rep 4 + kuser_pad __kuser_get_tls, 16 + .rep 3 .word 0 @ 0xffff0ff0 software TLS value, then .endr @ pad up to __kuser_helper_version @@ -932,14 +940,16 @@ __kuser_helper_version: @ 0xffff0ffc .globl __kuser_helper_end __kuser_helper_end: +#endif + THUMB( .thumb ) /* * Vector stubs. * - * This code is copied to 0xffff0200 so we can use branches in the - * vectors, rather than ldr's. Note that this code must not - * exceed 0x300 bytes. + * This code is copied to 0xffff1000 so we can use branches in the + * vectors, rather than ldr's. Note that this code must not exceed + * a page size. * * Common stub entry macro: * Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC @@ -986,8 +996,17 @@ ENDPROC(vector_\name) 1: .endm - .globl __stubs_start + .section .stubs, "ax", %progbits __stubs_start: + @ This must be the first word + .word vector_swi + +vector_rst: + ARM( swi SYS_ERROR0 ) + THUMB( svc #0 ) + THUMB( nop ) + b vector_und + /* * Interrupt dispatcher */ @@ -1082,6 +1101,16 @@ __stubs_start: .align 5 /*============================================================================= + * Address exception handler + *----------------------------------------------------------------------------- + * These aren't too critical. + * (they're not supposed to happen, and won't happen in 32-bit data mode). + */ + +vector_addrexcptn: + b vector_addrexcptn + +/*============================================================================= * Undefined FIQs *----------------------------------------------------------------------------- * Enter in FIQ mode, spsr = ANY CPSR, lr = ANY PC @@ -1094,45 +1123,19 @@ __stubs_start: vector_fiq: subs pc, lr, #4 -/*============================================================================= - * Address exception handler - *----------------------------------------------------------------------------- - * These aren't too critical. - * (they're not supposed to happen, and won't happen in 32-bit data mode). - */ - -vector_addrexcptn: - b vector_addrexcptn - -/* - * We group all the following data together to optimise - * for CPUs with separate I & D caches. - */ - .align 5 - -.LCvswi: - .word vector_swi - - .globl __stubs_end -__stubs_end: - - .equ stubs_offset, __vectors_start + 0x200 - __stubs_start + .globl vector_fiq_offset + .equ vector_fiq_offset, vector_fiq - .globl __vectors_start + .section .vectors, "ax", %progbits __vectors_start: - ARM( swi SYS_ERROR0 ) - THUMB( svc #0 ) - THUMB( nop ) - W(b) vector_und + stubs_offset - W(ldr) pc, .LCvswi + stubs_offset - W(b) vector_pabt + stubs_offset - W(b) vector_dabt + stubs_offset - W(b) vector_addrexcptn + stubs_offset - W(b) vector_irq + stubs_offset - W(b) vector_fiq + stubs_offset - - .globl __vectors_end -__vectors_end: + W(b) vector_rst + W(b) vector_und + W(ldr) pc, __vectors_start + 0x1000 + W(b) vector_pabt + W(b) vector_dabt + W(b) vector_addrexcptn + W(b) vector_irq + W(b) vector_fiq .data diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index e00621f1403f..52b26432c9a9 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -49,7 +49,7 @@ __irq_entry: mov r1, sp stmdb sp!, {lr} @ routine called with r0 = irq number, r1 = struct pt_regs * - bl nvic_do_IRQ + bl nvic_handle_irq pop {lr} @ diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index 2adda11f712f..25442f451148 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -47,6 +47,11 @@ #include <asm/irq.h> #include <asm/traps.h> +#define FIQ_OFFSET ({ \ + extern void *vector_fiq_offset; \ + (unsigned)&vector_fiq_offset; \ + }) + static unsigned long no_fiq_insn; /* Default reacquire function @@ -80,13 +85,16 @@ int show_fiq_list(struct seq_file *p, int prec) void set_fiq_handler(void *start, unsigned int length) { #if defined(CONFIG_CPU_USE_DOMAINS) - memcpy((void *)0xffff001c, start, length); + void *base = (void *)0xffff0000; #else - memcpy(vectors_page + 0x1c, start, length); + void *base = vectors_page; #endif - flush_icache_range(0xffff001c, 0xffff001c + length); + unsigned offset = FIQ_OFFSET; + + memcpy(base + offset, start, length); + flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length); if (!vectors_high()) - flush_icache_range(0x1c, 0x1c + length); + flush_icache_range(offset, offset + length); } int claim_fiq(struct fiq_handler *f) @@ -144,6 +152,7 @@ EXPORT_SYMBOL(disable_fiq); void __init init_FIQ(int start) { - no_fiq_insn = *(unsigned long *)0xffff001c; + unsigned offset = FIQ_OFFSET; + no_fiq_insn = *(unsigned long *)(0xffff0000 + offset); fiq_start = start; } diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index b361de143756..14235ba64a90 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -87,6 +87,7 @@ ENTRY(stext) ENDPROC(stext) #ifdef CONFIG_SMP + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 9cf6063020ae..2c7cc1e03473 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -343,6 +343,7 @@ __turn_mmu_on_loc: .long __turn_mmu_on_end #if defined(CONFIG_SMP) + .text ENTRY(secondary_startup) /* * Common entry point for secondary CPUs. diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 4910232c4833..797b1a6a4906 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode) ldr \reg3, [\reg2] ldr \reg1, [\reg2, \reg3] cmp \mode, \reg1 @ matches primary CPU boot mode? - orrne r7, r7, #BOOT_CPU_MODE_MISMATCH - strne r7, [r5, r6] @ record what happened and give up + orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH + strne \reg1, [\reg2, \reg3] @ record what happened and give up .endm #else /* ZIMAGE */ diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index d3ca4f6915af..536c85fe72a8 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -197,6 +197,7 @@ void machine_shutdown(void) */ void machine_halt(void) { + local_irq_disable(); smp_send_stop(); local_irq_disable(); @@ -211,6 +212,7 @@ void machine_halt(void) */ void machine_power_off(void) { + local_irq_disable(); smp_send_stop(); if (pm_power_off) @@ -230,6 +232,7 @@ void machine_power_off(void) */ void machine_restart(char *cmd) { + local_irq_disable(); smp_send_stop(); arm_pm_restart(reboot_mode, cmd); @@ -426,10 +429,11 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) } #ifdef CONFIG_MMU +#ifdef CONFIG_KUSER_HELPERS /* * The vectors page is always readable from user space for the - * atomic helpers and the signal restart code. Insert it into the - * gate_vma so that it is visible through ptrace and /proc/<pid>/mem. + * atomic helpers. Insert it into the gate_vma so that it is visible + * through ptrace and /proc/<pid>/mem. */ static struct vm_area_struct gate_vma = { .vm_start = 0xffff0000, @@ -458,9 +462,48 @@ int in_gate_area_no_mm(unsigned long addr) { return in_gate_area(NULL, addr); } +#define is_gate_vma(vma) ((vma) = &gate_vma) +#else +#define is_gate_vma(vma) 0 +#endif const char *arch_vma_name(struct vm_area_struct *vma) { - return (vma == &gate_vma) ? "[vectors]" : NULL; + return is_gate_vma(vma) ? "[vectors]" : + (vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ? + "[sigpage]" : NULL; +} + +static struct page *signal_page; +extern struct page *get_signal_page(void); + +int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) +{ + struct mm_struct *mm = current->mm; + unsigned long addr; + int ret; + + if (!signal_page) + signal_page = get_signal_page(); + if (!signal_page) + return -ENOMEM; + + down_write(&mm->mmap_sem); + addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0); + if (IS_ERR_VALUE(addr)) { + ret = addr; + goto up_fail; + } + + ret = install_special_mapping(mm, addr, PAGE_SIZE, + VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC, + &signal_page); + + if (ret == 0) + mm->context.sigpage = addr; + + up_fail: + up_write(&mm->mmap_sem); + return ret; } #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 63af9a7ae512..afc2489ee13b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b) void __init hyp_mode_check(void) { #ifdef CONFIG_ARM_VIRT_EXT + sync_boot_mode(); + if (is_hyp_mode_available()) { pr_info("CPU: All CPU(s) started in HYP mode.\n"); pr_info("CPU: Virtualization extensions available.\n"); @@ -971,6 +973,7 @@ static const char *hwcap_str[] = { "vfpv4", "idiva", "idivt", + "vfpd32", "lpae", NULL }; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1c16c35c271a..ab3304225272 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/errno.h> +#include <linux/random.h> #include <linux/signal.h> #include <linux/personality.h> #include <linux/uaccess.h> @@ -15,12 +16,11 @@ #include <asm/elf.h> #include <asm/cacheflush.h> +#include <asm/traps.h> #include <asm/ucontext.h> #include <asm/unistd.h> #include <asm/vfp.h> -#include "signal.h" - /* * For ARM syscalls, we encode the syscall number into the instruction. */ @@ -40,11 +40,13 @@ #define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE)) #define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE)) -const unsigned long sigreturn_codes[7] = { +static const unsigned long sigreturn_codes[7] = { MOV_R7_NR_SIGRETURN, SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN, MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +static unsigned long signal_return_offset; + #ifdef CONFIG_CRUNCH static int preserve_crunch_context(struct crunch_sigframe __user *frame) { @@ -400,14 +402,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig, __put_user(sigreturn_codes[idx+1], rc+1)) return 1; - if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) { +#ifdef CONFIG_MMU + if (cpsr & MODE32_BIT) { + struct mm_struct *mm = current->mm; + /* - * 32-bit code can use the new high-page - * signal return code support except when the MPU has - * protected the vectors page from PL0 + * 32-bit code can use the signal return page + * except when the MPU has protected the vectors + * page from PL0 */ - retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb; - } else { + retcode = mm->context.sigpage + signal_return_offset + + (idx << 2) + thumb; + } else +#endif + { /* * Ensure that the instruction cache sees * the return code written onto the stack. @@ -608,3 +616,33 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall) } while (thread_flags & _TIF_WORK_MASK); return 0; } + +struct page *get_signal_page(void) +{ + unsigned long ptr; + unsigned offset; + struct page *page; + void *addr; + + page = alloc_pages(GFP_KERNEL, 0); + + if (!page) + return NULL; + + addr = page_address(page); + + /* Give the signal return code some randomness */ + offset = 0x200 + (get_random_int() & 0x7fc); + signal_return_offset = offset; + + /* + * Copy signal return handlers into the vector page, and + * set sigreturn to be a pointer to these. + */ + memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); + + ptr = (unsigned long)addr + offset; + flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + + return page; +} diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h deleted file mode 100644 index 5ff067b7c752..000000000000 --- a/arch/arm/kernel/signal.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * linux/arch/arm/kernel/signal.h - * - * Copyright (C) 2005-2009 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) - -extern const unsigned long sigreturn_codes[7]; diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index a98b62dca2fa..c2edfff573c2 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored) local_flush_bp_all(); } -#ifdef CONFIG_ARM_ERRATA_798181 -static int erratum_a15_798181(void) -{ - unsigned int midr = read_cpuid_id(); - - /* Cortex-A15 r0p0..r3p2 affected */ - if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2) - return 0; - return 1; -} -#else -static int erratum_a15_798181(void) -{ - return 0; -} -#endif - static void ipi_flush_tlb_a15_erratum(void *arg) { dmb(); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index cab094c234ee..ab517fcce21b 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -35,8 +35,6 @@ #include <asm/tls.h> #include <asm/system_misc.h> -#include "signal.h" - static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" }; void *vectors_page; @@ -800,15 +798,26 @@ void __init trap_init(void) return; } -static void __init kuser_get_tls_init(unsigned long vectors) +#ifdef CONFIG_KUSER_HELPERS +static void __init kuser_init(void *vectors) { + extern char __kuser_helper_start[], __kuser_helper_end[]; + int kuser_sz = __kuser_helper_end - __kuser_helper_start; + + memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); + /* * vectors + 0xfe0 = __kuser_get_tls * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8 */ if (tls_emu || has_tls_reg) - memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); + memcpy(vectors + 0xfe0, vectors + 0xfe8, 4); } +#else +static void __init kuser_init(void *vectors) +{ +} +#endif void __init early_trap_init(void *vectors_base) { @@ -816,33 +825,30 @@ void __init early_trap_init(void *vectors_base) unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; - extern char __kuser_helper_start[], __kuser_helper_end[]; - int kuser_sz = __kuser_helper_end - __kuser_helper_start; + unsigned i; vectors_page = vectors_base; /* + * Poison the vectors page with an undefined instruction. This + * instruction is chosen to be undefined for both ARM and Thumb + * ISAs. The Thumb version is an undefined instruction with a + * branch back to the undefined instruction. + */ + for (i = 0; i < PAGE_SIZE / sizeof(u32); i++) + ((u32 *)vectors_base)[i] = 0xe7fddef1; + + /* * Copy the vectors, stubs and kuser helpers (in entry-armv.S) * into the vector page, mapped at 0xffff0000, and ensure these * are visible to the instruction stream. */ memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start); - memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start); - memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz); + memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start); - /* - * Do processor specific fixups for the kuser helpers - */ - kuser_get_tls_init(vectors); - - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ - memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), - sigreturn_codes, sizeof(sigreturn_codes)); + kuser_init(vectors_base); - flush_icache_range(vectors, vectors + PAGE_SIZE); + flush_icache_range(vectors, vectors + PAGE_SIZE * 2); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); #else /* ifndef CONFIG_CPU_V7M */ /* diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index fa25e4e425f6..7bcee5c9b604 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -148,6 +148,23 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_begin = .; #endif + /* + * The vectors and stubs are relocatable code, and the + * only thing that matters is their relative offsets + */ + __vectors_start = .; + .vectors 0 : AT(__vectors_start) { + *(.vectors) + } + . = __vectors_start + SIZEOF(.vectors); + __vectors_end = .; + + __stubs_start = .; + .stubs 0x1000 : AT(__stubs_start) { + *(.stubs) + } + . = __stubs_start + SIZEOF(.stubs); + __stubs_end = .; INIT_TEXT_SECTION(8) .exit.text : { diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 614e41e7881b..905efc8cac79 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -121,8 +121,7 @@ config MSM_SMD bool config MSM_GPIOMUX - depends on !(ARCH_MSM8X60 || ARCH_MSM8960) - bool "MSM V1 TLMM GPIOMUX architecture" + bool help Support for MSM V1 TLMM GPIOMUX architecture. diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c deleted file mode 100644 index 27de2abd7144..000000000000 --- a/arch/arm/mach-msm/gpiomux-v1.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ -#include <linux/kernel.h> -#include "gpiomux.h" -#include "proc_comm.h" - -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val) -{ - unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) | - ((gpio & 0x3ff) << 4); - unsigned tlmm_disable = 0; - int rc; - - rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, - &tlmm_config, &tlmm_disable); - if (rc) - pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n", - __func__, rc, tlmm_config, tlmm_disable); -} diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index 8e82f41a8923..4410d7766f93 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -73,16 +73,6 @@ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended); - -/* Architecture-internal function for use by the framework only. - * This function can assume the following: - * - the gpio value has passed a bounds-check - * - the gpiomux spinlock has been obtained - * - * This function is not for public consumption. External users - * should use msm_gpiomux_write. - */ -void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index 393aeefaebb0..043e5705f2a6 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -42,7 +42,7 @@ /* Using generic display panel */ static struct tfp410_platform_data omap4_dvi_panel = { - .i2c_bus_num = 3, + .i2c_bus_num = 2, .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, }; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 5cc92874be7e..f99f68e1e85b 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -129,6 +129,7 @@ static int omap_device_build_from_dt(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; const char *oh_name; int oh_cnt, i, ret = 0; + bool device_active = false; oh_cnt = of_property_count_strings(node, "ti,hwmods"); if (oh_cnt <= 0) { @@ -152,6 +153,8 @@ static int omap_device_build_from_dt(struct platform_device *pdev) goto odbfd_exit1; } hwmods[i] = oh; + if (oh->flags & HWMOD_INIT_NO_IDLE) + device_active = true; } od = omap_device_alloc(pdev, hwmods, oh_cnt); @@ -172,6 +175,11 @@ static int omap_device_build_from_dt(struct platform_device *pdev) pdev->dev.pm_domain = &omap_device_pm_domain; + if (device_active) { + omap_device_enable(pdev); + pm_runtime_set_active(&pdev->dev); + } + odbfd_exit1: kfree(hwmods); odbfd_exit: @@ -842,6 +850,7 @@ static int __init omap_device_late_idle(struct device *dev, void *data) { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od = to_omap_device(pdev); + int i; if (!od) return 0; @@ -850,6 +859,15 @@ static int __init omap_device_late_idle(struct device *dev, void *data) * If omap_device state is enabled, but has no driver bound, * idle it. */ + + /* + * Some devices (like memory controllers) are always kept + * enabled, and should not be idled even with no drivers. + */ + for (i = 0; i < od->hwmods_cnt; i++) + if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE) + return 0; + if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) { if (od->_state == OMAP_DEVICE_STATE_ENABLED) { dev_warn(dev, "%s: enabled but no driver. Idling\n", diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 7341eff63f56..7f4db12b1459 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2386,7 +2386,7 @@ static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data) np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh); if (np) - va_start = of_iomap(np, 0); + va_start = of_iomap(np, oh->mpu_rt_idx); } else { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index aab33fd814c0..e1482a9b3bc2 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -95,6 +95,54 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define MODULEMODE_HWCTRL 1 #define MODULEMODE_SWCTRL 2 +#define DEBUG_OMAP2UART1_FLAGS 0 +#define DEBUG_OMAP2UART2_FLAGS 0 +#define DEBUG_OMAP2UART3_FLAGS 0 +#define DEBUG_OMAP3UART3_FLAGS 0 +#define DEBUG_OMAP3UART4_FLAGS 0 +#define DEBUG_OMAP4UART3_FLAGS 0 +#define DEBUG_OMAP4UART4_FLAGS 0 +#define DEBUG_TI81XXUART1_FLAGS 0 +#define DEBUG_TI81XXUART2_FLAGS 0 +#define DEBUG_TI81XXUART3_FLAGS 0 +#define DEBUG_AM33XXUART1_FLAGS 0 + +#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) + +#if defined(CONFIG_DEBUG_OMAP2UART1) +#undef DEBUG_OMAP2UART1_FLAGS +#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART2) +#undef DEBUG_OMAP2UART2_FLAGS +#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP2UART3) +#undef DEBUG_OMAP2UART3_FLAGS +#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART3) +#undef DEBUG_OMAP3UART3_FLAGS +#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP3UART4) +#undef DEBUG_OMAP3UART4_FLAGS +#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART3) +#undef DEBUG_OMAP4UART3_FLAGS +#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_OMAP4UART4) +#undef DEBUG_OMAP4UART4_FLAGS +#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART1) +#undef DEBUG_TI81XXUART1_FLAGS +#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART2) +#undef DEBUG_TI81XXUART2_FLAGS +#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_TI81XXUART3) +#undef DEBUG_TI81XXUART3_FLAGS +#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS +#elif defined(CONFIG_DEBUG_AM33XXUART1) +#undef DEBUG_AM33XXUART1_FLAGS +#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS +#endif /** * struct omap_hwmod_mux_info - hwmod specific mux configuration @@ -568,6 +616,7 @@ struct omap_hwmod_link { * @voltdm: pointer to voltage domain (filled in at runtime) * @dev_attr: arbitrary device attributes that can be passed to the driver * @_sysc_cache: internal-use hwmod flags + * @mpu_rt_idx: index of device address space for register target (for DT boot) * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port: cached MPU register target slave (internal use) * @opt_clks_cnt: number of @opt_clks @@ -617,6 +666,7 @@ struct omap_hwmod { struct list_head node; struct omap_hwmod_ocp_if *_mpu_port; u16 flags; + u8 mpu_rt_idx; u8 response_lat; u8 rst_lines_cnt; u8 opt_clks_cnt; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index d05fc7b54567..56cebb05509e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -512,7 +512,7 @@ struct omap_hwmod omap2xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -532,7 +532,7 @@ struct omap_hwmod omap2xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -552,7 +552,7 @@ struct omap_hwmod omap2xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 28bbd56346a9..eb2f3b93b51c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -562,6 +562,7 @@ static struct omap_hwmod am33xx_cpgmac0_hwmod = { .clkdm_name = "cpsw_125mhz_clkdm", .flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY), .main_clk = "cpsw_125mhz_gclk", + .mpu_rt_idx = 1, .prcm = { .omap4 = { .clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET, @@ -1512,7 +1513,7 @@ static struct omap_hwmod am33xx_uart1_hwmod = { .name = "uart1", .class = &uart_class, .clkdm_name = "l4_wkup_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "dpll_per_m2_div4_wkupdm_ck", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f7a3df2fb579..0c3a427da544 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -490,7 +490,7 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { .mpu_irqs = omap2_uart1_mpu_irqs, .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -509,7 +509,7 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { .mpu_irqs = omap2_uart2_mpu_irqs, .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = CORE_MOD, @@ -528,7 +528,8 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { .mpu_irqs = omap2_uart3_mpu_irqs, .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS | + HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, @@ -558,7 +559,7 @@ static struct omap_hwmod omap36xx_uart4_hwmod = { .mpu_irqs = uart4_mpu_irqs, .sdma_reqs = uart4_sdma_reqs, .main_clk = "uart4_fck", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .prcm = { .omap2 = { .module_offs = OMAP3430_PER_MOD, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index d04b5e60fdbe..9c3b504477d7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2858,8 +2858,7 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -2875,7 +2874,7 @@ static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, .clkdm_name = "l4_per_clkdm", - .flags = HWMOD_SWSUP_SIDLE_ACT, + .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index f37ae96b70a1..3c70f5c1860f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -1375,7 +1375,7 @@ static struct omap_hwmod omap54xx_uart3_hwmod = { .name = "uart3", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + .flags = DEBUG_OMAP4UART3_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { @@ -1391,6 +1391,7 @@ static struct omap_hwmod omap54xx_uart4_hwmod = { .name = "uart4", .class = &omap54xx_uart_hwmod_class, .clkdm_name = "l4per_clkdm", + .flags = DEBUG_OMAP4UART4_FLAGS, .main_clk = "func_48m_fclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 3a674de6cb63..a388f8c1bcb3 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -208,17 +208,6 @@ static int __init omap_serial_early_init(void) pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); } - - /* - * omap-uart can be used for earlyprintk logs - * So if omap-uart is used as console then prevent - * uart reset and idle to get logs from omap-uart - * until uart console driver is available to take - * care for console messages. - * Idling or resetting omap-uart while printing logs - * early boot logs can stall the boot-up. - */ - oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET; } } while (1); diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index e115f6742107..c5be60d85e4b 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -1162,9 +1162,6 @@ static void __init eva_init(void) gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */ gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */ - /* Touchscreen */ - gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */ - /* GETHER */ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */ diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c index d5554646916c..3354a85c90f7 100644 --- a/arch/arm/mach-shmobile/board-bockw.c +++ b/arch/arm/mach-shmobile/board-bockw.c @@ -167,7 +167,13 @@ static const struct pinctrl_map bockw_pinctrl_map[] = { "usb1", "usb1"), /* SDHI0 */ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", - "sdhi0", "sdhi0"), + "sdhi0_data4", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_ctrl", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_cd", "sdhi0"), + PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778", + "sdhi0_wp", "sdhi0"), }; #define FPGA 0x18200000 diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c index d73e21d3ea8a..8d6bd5c5efb9 100644 --- a/arch/arm/mach-shmobile/board-lager.c +++ b/arch/arm/mach-shmobile/board-lager.c @@ -59,7 +59,7 @@ static __initdata struct gpio_led_platform_data lager_leds_pdata = { #define GPIO_KEY(c, g, d, ...) \ { .code = c, .gpio = g, .desc = d, .active_low = 1 } -static __initdata struct gpio_keys_button gpio_buttons[] = { +static struct gpio_keys_button gpio_buttons[] = { GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"), GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"), GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"), diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S index 78ebc7559f53..4c09bae86edf 100644 --- a/arch/arm/mach-sti/headsmp.S +++ b/arch/arm/mach-sti/headsmp.S @@ -16,8 +16,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * ST specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 6cacdc8dd654..db5c2cab8fda 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -421,24 +421,28 @@ config CPU_32v3 select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v4T bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v5 bool select CPU_USE_DOMAINS if MMU select NEEDS_SYSCALL_FOR_CMPXCHG if SMP select TLS_REG_EMUL if SMP || !MMU + select NEED_KUSER_HELPERS config CPU_32v6 bool @@ -776,6 +780,7 @@ config CPU_BPREDICT_DISABLE config TLS_REG_EMUL bool + select NEED_KUSER_HELPERS help An SMP system using a pre-ARMv6 processor (there are apparently a few prototypes like that in existence) and therefore access to @@ -783,11 +788,40 @@ config TLS_REG_EMUL config NEEDS_SYSCALL_FOR_CMPXCHG bool + select NEED_KUSER_HELPERS help SMP on a pre-ARMv6 processor? Well OK then. Forget about fast user space cmpxchg support. It is just not possible. +config NEED_KUSER_HELPERS + bool + +config KUSER_HELPERS + bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS + default y + help + Warning: disabling this option may break user programs. + + Provide kuser helpers in the vector page. The kernel provides + helper code to userspace in read only form at a fixed location + in the high vector page to allow userspace to be independent of + the CPU type fitted to the system. This permits binaries to be + run on ARMv4 through to ARMv7 without modification. + + However, the fixed address nature of these helpers can be used + by ROP (return orientated programming) authors when creating + exploits. + + If all of the binaries and libraries which run on your platform + are built specifically for your platform, and make no use of + these helpers, then you can turn this option off. However, + when such an binary or library is run, it will receive a SIGILL + signal, which will terminate the program. + + Say N here only if you are absolutely certain that you do not + need these helpers; otherwise, the safe option is to say Y. + config DMA_CACHE_RWFO bool "Enable read/write for ownership DMA cache maintenance" depends on CPU_V6K && SMP diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b55b1015724b..4a0544492f10 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -245,7 +245,8 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk) if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) { local_flush_bp_all(); local_flush_tlb_all(); - dummy_flush_tlb_a15_erratum(); + if (erratum_a15_798181()) + dummy_flush_tlb_a15_erratum(); } atomic64_set(&per_cpu(active_asids, cpu), asid); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4f56617a2392..53cdbd39ec8e 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -989,6 +989,7 @@ phys_addr_t arm_lowmem_limit __initdata = 0; void __init sanity_check_meminfo(void) { + phys_addr_t memblock_limit = 0; int i, j, highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; @@ -1052,9 +1053,32 @@ void __init sanity_check_meminfo(void) bank->size = size_limit; } #endif - if (!bank->highmem && bank->start + bank->size > arm_lowmem_limit) - arm_lowmem_limit = bank->start + bank->size; + if (!bank->highmem) { + phys_addr_t bank_end = bank->start + bank->size; + if (bank_end > arm_lowmem_limit) + arm_lowmem_limit = bank_end; + + /* + * Find the first non-section-aligned page, and point + * memblock_limit at it. This relies on rounding the + * limit down to be section-aligned, which happens at + * the end of this function. + * + * With this algorithm, the start or end of almost any + * bank can be non-section-aligned. The only exception + * is that the start of the bank 0 must be section- + * aligned, since otherwise memory would need to be + * allocated when mapping the start of bank 0, which + * occurs before any free memory is mapped. + */ + if (!memblock_limit) { + if (!IS_ALIGNED(bank->start, SECTION_SIZE)) + memblock_limit = bank->start; + else if (!IS_ALIGNED(bank_end, SECTION_SIZE)) + memblock_limit = bank_end; + } + } j++; } #ifdef CONFIG_HIGHMEM @@ -1079,7 +1103,18 @@ void __init sanity_check_meminfo(void) #endif meminfo.nr_banks = j; high_memory = __va(arm_lowmem_limit - 1) + 1; - memblock_set_current_limit(arm_lowmem_limit); + + /* + * Round the memblock limit down to a section size. This + * helps to ensure that we will allocate memory from the + * last full section, which should be mapped. + */ + if (memblock_limit) + memblock_limit = round_down(memblock_limit, SECTION_SIZE); + if (!memblock_limit) + memblock_limit = arm_lowmem_limit; + + memblock_set_current_limit(memblock_limit); } static inline void prepare_page_table(void) @@ -1160,7 +1195,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) /* * Allocate the vector page early. */ - vectors = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE * 2); early_trap_init(vectors); @@ -1205,15 +1240,27 @@ static void __init devicemaps_init(struct machine_desc *mdesc) map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; +#ifdef CONFIG_KUSER_HELPERS map.type = MT_HIGH_VECTORS; +#else + map.type = MT_LOW_VECTORS; +#endif create_mapping(&map); if (!vectors_high()) { map.virtual = 0; + map.length = PAGE_SIZE * 2; map.type = MT_LOW_VECTORS; create_mapping(&map); } + /* Now create a kernel read-only mapping */ + map.pfn += 1; + map.virtual = 0xffff0000 + PAGE_SIZE; + map.length = PAGE_SIZE; + map.type = MT_LOW_VECTORS; + create_mapping(&map); + /* * Ask the machine support to map in the statically mapped devices. */ @@ -1276,8 +1323,6 @@ void __init paging_init(struct machine_desc *mdesc) { void *zero_page; - memblock_set_current_limit(arm_lowmem_limit); - build_mem_type_table(); prepare_page_table(); map_lowmem(); diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index f64afb9f1bd5..bdd3be4be77a 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -110,7 +110,7 @@ ENTRY(cpu_v7_set_pte_ext) ARM( str r3, [r0, #2048]! ) THUMB( add r0, r0, #2048 ) THUMB( str r3, [r0] ) - ALT_SMP(mov pc,lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index c36ac69488c8..01a719e18bb0 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -81,7 +81,7 @@ ENTRY(cpu_v7_set_pte_ext) tst r3, #1 << (55 - 32) @ L_PTE_DIRTY orreq r2, #L_PTE_RDONLY 1: strd r2, r3, [r0] - ALT_SMP(mov pc, lr) + ALT_SMP(W(nop)) ALT_UP (mcr p15, 0, r0, c7, c10, 1) @ flush_pte #endif mov pc, lr diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 5c6d5a3050ea..73398bcf9bd8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -75,13 +75,14 @@ ENTRY(cpu_v7_do_idle) ENDPROC(cpu_v7_do_idle) ENTRY(cpu_v7_dcache_clean_area) - ALT_SMP(mov pc, lr) @ MP extensions imply L1 PTW - ALT_UP(W(nop)) - dcache_line_size r2, r3 -1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry + ALT_SMP(W(nop)) @ MP extensions imply L1 PTW + ALT_UP_B(1f) + mov pc, lr +1: dcache_line_size r2, r3 +2: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, r2 subs r1, r1, r2 - bhi 1b + bhi 2b dsb mov pc, lr ENDPROC(cpu_v7_dcache_clean_area) diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index f71c37edca26..c9770ba5c7df 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -172,7 +172,7 @@ static void __init xen_percpu_init(void *unused) enable_percpu_irq(xen_events_irq, 0); } -static void xen_restart(char str, const char *cmd) +static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) { struct sched_shutdown r = { .reason = SHUTDOWN_reboot }; int rc; |