diff options
Diffstat (limited to 'arch/arm64')
4 files changed, 13 insertions, 8 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts index 02f8e72f0cad..05486cccee1c 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-neo2.dts @@ -75,7 +75,7 @@ pinctrl-0 = <&emac_rgmii_pins>; phy-supply = <®_gmac_3v3>; phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts index d17abb515835..e99e7644ff39 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -70,7 +70,9 @@ regulator-name = "rst-usb-eth2"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb_eth2>; - gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio3 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; }; reg_vdd_5v: regulator-5v { @@ -95,7 +97,7 @@ clocks = <&osc_can>; interrupt-parent = <&gpio4>; interrupts = <28 IRQ_TYPE_EDGE_FALLING>; - spi-max-frequency = <100000>; + spi-max-frequency = <10000000>; vdd-supply = <®_vdd_3v3>; xceiver-supply = <®_vdd_5v>; }; @@ -111,7 +113,7 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-connection-type = "rgmii"; + phy-connection-type = "rgmii-rxid"; phy-handle = <ðphy>; status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi index 9db9b90bf2bc..42bbbb3f532b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -91,10 +91,12 @@ reg_vdd_soc: BUCK1 { regulator-name = "buck1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <850000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <850000>; + nxp,dvs-standby-voltage = <800000>; }; reg_vdd_arm: BUCK2 { @@ -111,7 +113,7 @@ reg_vdd_dram: BUCK3 { regulator-name = "buck3"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; }; @@ -150,7 +152,7 @@ reg_vdd_snvs: LDO2 { regulator-name = "ldo2"; - regulator-min-microvolt = <850000>; + regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8c15d9fed08f..d12e4cbfc852 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2590,9 +2590,10 @@ power-domains = <&dispcc MDSS_GDSC>; clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>; - clock-names = "iface", "nrt_bus", "core"; + clock-names = "iface", "bus", "nrt_bus", "core"; assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>; assigned-clock-rates = <460000000>; |