summaryrefslogtreecommitdiffstats
path: root/arch/arm64
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm64')
-rw-r--r--arch/arm64/Kconfig1
-rw-r--r--arch/arm64/Kconfig.platforms3
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts8
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi4
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-gx.dtsi6
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi2
-rw-r--r--arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts8
-rw-r--r--arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi4
-rw-r--r--arch/arm64/boot/dts/freescale/imx8mq.dtsi10
-rw-r--r--arch/arm64/boot/dts/freescale/mba8mx.dtsi2
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts14
-rw-r--r--arch/arm64/boot/dts/ti/k3-j721s2.dtsi22
-rw-r--r--arch/arm64/include/asm/el2_setup.h2
-rw-r--r--arch/arm64/kvm/vgic/vgic-mmio.c2
17 files changed, 44 insertions, 56 deletions
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 390f0b1d0144..7c3081e56669 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -672,6 +672,7 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
config ARM64_ERRATUM_2051678
bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit"
+ default y
help
This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
Affected Coretex-A510 might not respect the ordering rules for
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7d5d58800170..21697449d762 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -309,9 +309,6 @@ config ARCH_VISCONTI
help
This enables support for Toshiba Visconti SoCs Family.
-config ARCH_VULCAN
- def_bool n
-
config ARCH_XGENE
bool "AppliedMicro X-Gene SOC Family"
help
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 517519e6e87f..f84d4b489e0b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index d8838dde0f0f..4fb31c2ba31c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
regulator-always-on;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b244191..fd3fa82e4c33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
rtc1 = &vrtc;
};
- dioo2133: audio-amplifier-0 {
+ dio2133: audio-amplifier-0 {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@
audio-widgets = "Line", "Lineout";
audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
<&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
- <&dioo2133>;
+ <&dio2133>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2c30a4..aa14ea017a61 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
no-map;
};
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon@5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+
linux,cma {
compatible = "shared-dma-pool";
reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3b8..5751c48620ed 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98a0eef..ddb1b345397f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_5v>;
- enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
enable-active-high;
regulator-always-on;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 427475846fc7..a5d79f2f7c19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
regulator-always-on;
};
- reserved-memory {
- /* TEE Reserved Memory */
- bl32_reserved: bl32@5000000 {
- reg = <0x0 0x05300000 0x0 0x2000000>;
- no-map;
- };
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738e4070..c03f4e183389 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@
};
};
+&ftm_alarm0 {
+ status = "okay";
+};
+
&gpio1 {
gpio-line-names =
"", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f3e3418f7edc..2d4a472af6a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1115,8 +1115,8 @@
status = "okay";
ports {
- port@1 {
- reg = <1>;
+ port@0 {
+ reg = <0>;
mipi1_sensor_ep: endpoint {
remote-endpoint = <&camera1_ep>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2df2510d0118..e92ebb6147e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
status = "disabled";
- port@0 {
+ port {
lcdif_mipi_dsi: endpoint {
remote-endpoint = <&mipi_dsi_lcdif_in>;
};
@@ -1151,8 +1151,8 @@
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi1_mipi_ep: endpoint {
remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
+ port@1 {
+ reg = <1>;
csi2_mipi_ep: endpoint {
remote-endpoint = <&csi2_ep>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index f27e3c8de916..ce6d5bdba0a8 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -91,7 +91,7 @@
sound {
compatible = "fsl,imx-audio-tlv320aic32x4";
- model = "tqm-tlv320aic32";
+ model = "imx-audio-tlv320aic32x4";
ssi-controller = <&sai3>;
audio-codec = <&tlv320aic3x04>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46c5..b210cc07c539 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@
model = "Texas Instruments J721S2 EVM";
chosen {
- stdout-path = "serial10:115200n8";
- bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+ stdout-path = "serial2:115200n8";
+ bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+ };
+
+ aliases {
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart8;
+ mmc0 = &main_sdhci0;
+ mmc1 = &main_sdhci1;
+ can0 = &main_mcan16;
+ can1 = &mcu_mcan0;
+ can2 = &mcu_mcan1;
};
evm_12v0: fixedregulator-evm12v0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae03e88..fe5234c40f6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- serial4 = &main_uart2;
- serial5 = &main_uart3;
- serial6 = &main_uart4;
- serial7 = &main_uart5;
- serial8 = &main_uart6;
- serial9 = &main_uart7;
- serial10 = &main_uart8;
- serial11 = &main_uart9;
- mmc0 = &main_sdhci0;
- mmc1 = &main_sdhci1;
- can0 = &main_mcan16;
- can1 = &mcu_mcan0;
- can2 = &mcu_mcan1;
- can3 = &main_mcan3;
- can4 = &main_mcan5;
- };
-
chosen { };
cpus {
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index 3198acb2aad8..7f3c87f7a0ce 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -106,7 +106,7 @@
msr_s SYS_ICC_SRE_EL2, x0
isb // Make sure SRE is now set
mrs_s x0, SYS_ICC_SRE_EL2 // Read SRE back,
- tbz x0, #0, 1f // and check that it sticks
+ tbz x0, #0, .Lskip_gicv3_\@ // and check that it sticks
msr_s SYS_ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
.Lskip_gicv3_\@:
.endm
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index 7068da080799..49837d3a3ef5 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -248,6 +248,8 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
IRQCHIP_STATE_PENDING,
&val);
WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+ } else if (vgic_irq_is_mapped_level(irq)) {
+ val = vgic_get_phys_line_level(irq);
} else {
val = irq_is_pending(irq);
}
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-01 19:22:43 +0000