diff options
Diffstat (limited to 'arch/arm64/boot')
-rw-r--r-- | arch/arm64/boot/dts/arm/Makefile | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/arm/juno-base.dtsi | 154 | ||||
-rw-r--r-- | arch/arm64/boot/dts/arm/juno-clocks.dtsi | 4 | ||||
-rw-r--r-- | arch/arm64/boot/dts/arm/juno-r1.dts | 116 | ||||
-rw-r--r-- | arch/arm64/boot/dts/arm/juno.dts | 129 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 30 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi | 21 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 3 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi | 1 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/msm8916.dtsi | 25 | ||||
-rw-r--r-- | arch/arm64/boot/dts/qcom/pm8916.dtsi | 99 |
11 files changed, 452 insertions, 132 deletions
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile index 301a0dada1fe..c5c98b91514e 100644 --- a/arch/arm64/boot/dts/arm/Makefile +++ b/arch/arm64/boot/dts/arm/Makefile @@ -1,5 +1,5 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb -dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb always := $(dtb-y) diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi new file mode 100644 index 000000000000..e3ee96036eca --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -0,0 +1,154 @@ + /* + * Devices shared by all Juno boards + */ + + memtimer: timer@2a810000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x2a810000 0x0 0x10000>; + clock-frequency = <50000000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + frame@2a830000 { + frame-number = <1>; + interrupts = <0 60 4>; + reg = <0x0 0x2a830000 0x0 0x10000>; + }; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <2>; + #interrupt-cells = <3>; + #size-cells = <2>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 0 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 0 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 0 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 0 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 0 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 0 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 0 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 0 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 0 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 0 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 0 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 0 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi index c9b89efe0f56..25352ed943e6 100644 --- a/arch/arm64/boot/dts/arm/juno-clocks.dtsi +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -36,9 +36,9 @@ clock-output-names = "apb_pclk"; }; - soc_faxiclk: refclk533mhz { + soc_faxiclk: refclk400mhz { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <533000000>; + clock-frequency = <400000000>; clock-output-names = "faxi_clk"; }; diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts new file mode 100644 index 000000000000..c62751153a4f --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -0,0 +1,116 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2015 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r1)"; + compatible = "arm,juno-r1", "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + #include "juno-base.dtsi" + +}; + +&memtimer { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index 5e9110a3353d..d7cbdd482a61 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -91,33 +91,6 @@ }; }; - memory@80000000 { - device_type = "memory"; - /* last 16MB of the first memory area is reserved for secure world use by firmware */ - reg = <0x00000000 0x80000000 0x0 0x7f000000>, - <0x00000008 0x80000000 0x1 0x80000000>; - }; - - gic: interrupt-controller@2c001000 { - compatible = "arm,gic-400", "arm,cortex-a15-gic"; - reg = <0x0 0x2c010000 0 0x1000>, - <0x0 0x2c02f000 0 0x2000>, - <0x0 0x2c04f000 0 0x2000>, - <0x0 0x2c06f000 0 0x2000>; - #address-cells = <0>; - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; - }; - pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, @@ -134,105 +107,5 @@ <&A53_3>; }; - /include/ "juno-clocks.dtsi" - - dma@7ff00000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0x7ff00000 0 0x1000>; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_faxiclk>; - clock-names = "apb_pclk"; - }; - - soc_uart0: uart@7ff80000 { - compatible = "arm,pl011", "arm,primecell"; - reg = <0x0 0x7ff80000 0x0 0x1000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_uartclk>, <&soc_refclk100mhz>; - clock-names = "uartclk", "apb_pclk"; - }; - - i2c@7ffa0000 { - compatible = "snps,designware-i2c"; - reg = <0x0 0x7ffa0000 0x0 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; - clock-frequency = <400000>; - i2c-sda-hold-time-ns = <500>; - clocks = <&soc_smc50mhz>; - - dvi0: dvi-transmitter@70 { - compatible = "nxp,tda998x"; - reg = <0x70>; - }; - - dvi1: dvi-transmitter@71 { - compatible = "nxp,tda998x"; - reg = <0x71>; - }; - }; - - ohci@7ffb0000 { - compatible = "generic-ohci"; - reg = <0x0 0x7ffb0000 0x0 0x10000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - ehci@7ffc0000 { - compatible = "generic-ehci"; - reg = <0x0 0x7ffc0000 0x0 0x10000>; - interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_usb48mhz>; - }; - - memory-controller@7ffd0000 { - compatible = "arm,pl354", "arm,primecell"; - reg = <0 0x7ffd0000 0 0x1000>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&soc_smc50mhz>; - clock-names = "apb_pclk"; - }; - - smb { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0 0x08000000 0x04000000>, - <1 0 0 0x14000000 0x04000000>, - <2 0 0 0x18000000 0x04000000>, - <3 0 0 0x1c000000 0x04000000>, - <4 0 0 0x0c000000 0x04000000>, - <5 0 0 0x10000000 0x04000000>; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 15>; - interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, - <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, - <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, - <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, - <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, - <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, - <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, - <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, - <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, - <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, - <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, - <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, - <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; - - /include/ "juno-motherboard.dtsi" - }; + #include "juno-base.dtsi" }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi new file mode 100644 index 000000000000..535532b9287f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi @@ -0,0 +1,30 @@ +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +&pm8916_gpios { + + pinctrl-names = "default"; + pinctrl-0 = <&pm8916_gpios_default>; + + pm8916_gpios_default: default { + usb_hub_reset_pm { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + usb_sw_sel_pm { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + }; + usr_led_3_ctrl { + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + usr_led_4_ctrl { + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi new file mode 100644 index 000000000000..5f7023f90df7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi @@ -0,0 +1,21 @@ + +#include <dt-bindings/gpio/gpio.h> + +&msmgpio { + + pinctrl-names = "default"; + pinctrl-0 = <&soc_gpios_default>; + + soc_gpios_default: default { + usr_led_1_ctrl_default: usr_led_1_ctrl_default { + pins = "gpio21"; + function = "gpio"; + output-low; + }; + usr_led_2_ctrl_default: usr_led_2_ctrl_default { + pins = "gpio120"; + function = "gpio"; + output-low; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 703a4f16e711..98abece6b233 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -12,6 +12,9 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" +#include "apq8016-sbc-soc-pins.dtsi" +#include "apq8016-sbc-pmic-pins.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi index bea871b0df13..a1aa0b201e92 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -12,6 +12,7 @@ */ #include "msm8916.dtsi" +#include "pm8916.dtsi" / { aliases { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index f212b8303d04..0f49ebd0aa8b 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -77,7 +77,12 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; - pinctrl@1000000 { + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x4ab000 0x4>; + }; + + msmgpio: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x1000000 0x300000>; interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; @@ -192,5 +197,23 @@ status = "disabled"; }; }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x200f000 0x001000>, + <0x2400000 0x400000>, + <0x2c00000 0x400000>, + <0x3800000 0x200000>, + <0x200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi new file mode 100644 index 000000000000..b222ece7e3d2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -0,0 +1,99 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + usid0: pm8916@0 { + compatible = "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8916_gpios: gpios@c000 { + compatible = "qcom,pm8916-gpio"; + reg = <0xc000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>; + }; + + pm8916_mpps: mpps@a000 { + compatible = "qcom,pm8916-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>; + }; + + pm8916_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8916_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8916_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + usb_in { + reg = <VADC_USBIN>; + qcom,pre-scaling = <1 10>; + }; + vph_pwr { + reg = <VADC_VSYS>; + qcom,pre-scaling = <1 3>; + }; + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; + }; + + usid1: pm8916@1 { + compatible = "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; |