diff options
Diffstat (limited to 'arch/arm64/boot')
112 files changed, 7538 insertions, 1304 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index a80632641b39..70c776ef7aa7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -165,14 +165,14 @@ uart_A: serial@24000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; - reg = <0x0 0x24000 0x0 0x14>; + reg = <0x0 0x24000 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@23000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-uart"; - reg = <0x0 0x23000 0x0 0x14>; + reg = <0x0 0x23000 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6cb3c2a52baf..4ee2e7951482 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -235,14 +235,14 @@ uart_A: serial@84c0 { compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84c0 0x0 0x14>; + reg = <0x0 0x84c0 0x0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_B: serial@84dc { compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x84dc 0x0 0x14>; + reg = <0x0 0x84dc 0x0 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; @@ -287,7 +287,7 @@ uart_C: serial@8700 { compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x8700 0x0 0x14>; + reg = <0x0 0x8700 0x0 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; @@ -404,14 +404,14 @@ uart_AO: serial@4c0 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004c0 0x0 0x14>; + reg = <0x0 0x004c0 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_AO_B: serial@4e0 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; - reg = <0x0 0x004e0 0x0 0x14>; + reg = <0x0 0x004e0 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 4f355f17eed6..c8514110b9da 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -631,6 +631,7 @@ internal_phy: ethernet-phy@8 { compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <8>; max-speed = <100>; }; diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index f165f04db0c9..eb749c50a736 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -68,10 +68,29 @@ interrupt-controller; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; ranges = <0 0 0 0x2c1c0000 0 0x40000>; + v2m_0: v2m@0 { compatible = "arm,gic-v2m-frame"; msi-controller; - reg = <0 0 0 0x1000>; + reg = <0 0 0 0x10000>; + }; + + v2m@10000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x10000 0 0x10000>; + }; + + v2m@20000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x20000 0 0x10000>; + }; + + v2m@30000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0 0x30000 0 0x10000>; }; }; diff --git a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 4220fbdcb24a..ff5c4c47b22b 100644 --- a/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -98,7 +98,7 @@ clock-output-names = "clk125mhz"; }; - pci { + pcie@30000000 { compatible = "pci-host-ecam-generic"; device_type = "pci"; #interrupt-cells = <1>; @@ -118,6 +118,7 @@ ranges = <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>; + bus-range = <0 0xff>; interrupt-map-mask = <0 0 0 7>; interrupt-map = /* addr pin ic icaddr icintr */ diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index a77462da4a36..a1e3194b7483 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> / { aliases { @@ -112,8 +113,8 @@ sound { compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; + audio-codec = <&wm5110>, <&hdmi>; + i2s-controller = <&i2s0 0>, <&i2s1 0>; audio-amplifier = <&max98504>; mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; model = "wm5110"; @@ -217,8 +218,40 @@ }; &cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_SCLK_AUD_I2S>, + <&cmu_aud CLK_MOUT_SCLK_AUD_PCM>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_SCLK_AUDIO0>, + <&cmu_top CLK_MOUT_SCLK_AUDIO1>, + <&cmu_top CLK_MOUT_SCLK_SPDIF>, + + <&cmu_aud CLK_DIV_AUD_CA5>, + <&cmu_aud CLK_DIV_ACLK_AUD>, + <&cmu_aud CLK_DIV_PCLK_DBG_AUD>, + <&cmu_aud CLK_DIV_SCLK_AUD_I2S>, + <&cmu_aud CLK_DIV_SCLK_AUD_PCM>, + <&cmu_aud CLK_DIV_SCLK_AUD_SLIMBUS>, + <&cmu_aud CLK_DIV_SCLK_AUD_UART>, + <&cmu_top CLK_DIV_SCLK_AUDIO0>, + <&cmu_top CLK_DIV_SCLK_AUDIO1>, + <&cmu_top CLK_DIV_SCLK_PCM1>, + <&cmu_top CLK_DIV_SCLK_I2S1>; + + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_aud CLK_MOUT_AUD_PLL_USER>, + <&cmu_top CLK_FOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_MOUT_AUD_PLL_USER_T>, + <&cmu_top CLK_SCLK_AUDIO0>; + + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <196608001>, <65536001>, <32768001>, <49152001>, + <2048001>, <24576001>, <196608001>, + <24576001>, <98304001>, <2048001>, <49152001>; }; &cmu_fsys { @@ -267,6 +300,11 @@ <&cmu_top CLK_MOUT_BUS_PLL_USER>; }; +&cmu_top { + assigned-clocks = <&cmu_top CLK_FOUT_AUD_PLL>; + assigned-clock-rates = <196608001>; +}; + &cpu0 { cpu-supply = <&buck3_reg>; }; @@ -779,9 +817,22 @@ clocks = <&pmu_system_controller 0>; clock-names = "xtal"; - port { - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_musb_con: endpoint { + remote-endpoint = <&musb_con_to_mhl>; + }; }; }; }; @@ -798,6 +849,25 @@ muic: max77843-muic { compatible = "maxim,max77843-muic"; + + musb_con: musb_connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + musb_con_to_mhl: endpoint { + remote-endpoint = <&mhl_to_musb_con>; + }; + }; + }; + }; }; regulators { @@ -838,6 +908,12 @@ status = "okay"; }; +&i2s1 { + assigned-clocks = <&i2s1 CLK_I2S_RCLK_SRC>; + assigned-clock-parents = <&cmu_peric CLK_SCLK_I2S1>; + status = "okay"; +}; + &mshc_0 { status = "okay"; mmc-hs200-1_8v; diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi index 62f276970174..c0231d077fa6 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi @@ -969,6 +969,7 @@ ddc = <&hsi2c_11>; samsung,syscon-phandle = <&pmu_system_controller>; samsung,sysreg-phandle = <&syscon_disp>; + #sound-dai-cells = <0>; status = "disabled"; }; @@ -1311,6 +1312,25 @@ status = "disabled"; }; + i2s1: i2s@14d60000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x14d60000 0x100>; + dmas = <&pdma0 31 &pdma0 30>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 435 IRQ_TYPE_NONE>; + clocks = <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_PCLK_I2S1>, + <&cmu_peric CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,supports-6ch; + samsung,supports-rstclr; + samsung,supports-tdm; + samsung,supports-low-rfs; + #sound-dai-cells = <1>; + status = "disabled"; + }; + pwm: pwm@14dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x14dd0000 0x100>; @@ -1639,7 +1659,7 @@ power-domains = <&pd_aud>; }; - i2s0: i2s0@11440000 { + i2s0: i2s@11440000 { compatible = "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0 &adma 2>; @@ -1651,9 +1671,11 @@ <&cmu_aud CLK_SCLK_AUD_I2S>, <&cmu_aud CLK_SCLK_I2S_BCLK>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; power-domains = <&pd_aud>; + #sound-dai-cells = <1>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts index 22723527e626..00dd89b92b42 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -23,7 +23,7 @@ }; chosen { - linux,stdout-path = &serial_2; + stdout-path = &serial_2; }; memory@40000000 { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 82b272fb41b9..bb788eddf9f4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -70,6 +70,24 @@ reg = <0x0>; clocks = <&clockgen 1 0>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; }; }; @@ -118,6 +136,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -304,37 +353,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - i2c0: i2c@2180000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts index 6341281485cf..3a09297dc0ef 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts @@ -84,19 +84,19 @@ 0x2 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + nor@0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; - nand@1,0 { + nand@100000000 { compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; }; - fpga: board-control@2,0 { + fpga: board-control@200000000 { compatible = "fsl,ls1043aqds-fpga", "fsl,fpga-qixis"; reg = <0x2 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts index 3dc0c8e9663d..0a82bf941e11 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts @@ -97,7 +97,7 @@ 0x1 0x0 0x0 0x7e800000 0x00010000 0x2 0x0 0x0 0x7fb00000 0x00000100>; - nor@0,0 { + nor@0 { compatible = "cfi-flash"; #address-cells = <1>; #size-cells = <1>; @@ -106,14 +106,14 @@ device-width = <1>; }; - nand@1,0 { + nand@100000000 { compatible = "fsl,ifc-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x1 0x0 0x10000>; }; - cpld: board-control@2,0 { + cpld: board-control@200000000 { compatible = "fsl,ls1043ardb-cpld"; reg = <0x2 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 380e7c713395..1109f22bda5e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -81,6 +81,7 @@ clocks = <&clockgen 1 0>; next-level-cache = <&l2>; #cooling-cells = <2>; + cpu-idle-states = <&CPU_PH20>; }; cpu1: cpu@1 { @@ -89,6 +90,7 @@ reg = <0x1>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu2: cpu@2 { @@ -97,6 +99,7 @@ reg = <0x2>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; cpu3: cpu@3 { @@ -105,6 +108,7 @@ reg = <0x3>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; }; l2: l2-cache { @@ -112,6 +116,23 @@ }; }; + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0 0x80000000>; @@ -159,6 +180,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 0xf08>, /* Physical Secure PPI */ @@ -342,37 +394,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - qman: qman@1880000 { compatible = "fsl,qman"; reg = <0x0 0x1880000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts index 434383bade0e..410dc61fe10a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts @@ -175,19 +175,19 @@ 0x2 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nor@0,0 { + nor@0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; - nand@1,0 { + nand@100000000 { compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; }; - fpga: board-control@2,0 { + fpga: board-control@200000000 { compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; reg = <0x2 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts index 5dc2782e2a58..18d3c5bccfd1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts @@ -122,14 +122,14 @@ 0x2 0x0 0x0 0x7fb00000 0x00000100>; status = "okay"; - nand@0,0 { + nand@0 { compatible = "fsl,ifc-nand"; #address-cells = <1>; #size-cells = <1>; reg = <0x0 0x0 0x10000>; }; - cpld: board-control@2,0 { + cpld: board-control@200000000 { compatible = "fsl,ls1046ardb-cpld"; reg = <0x2 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 06b5e12d04d8..136ebfa9b333 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -122,7 +122,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -131,6 +131,8 @@ memory@80000000 { device_type = "memory"; + /* Real size will be filled by bootloader */ + reg = <0x0 0x80000000 0x0 0x0>; }; sysclk: sysclk { @@ -147,6 +149,37 @@ mask = <0x02>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) | @@ -362,37 +395,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 3>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - dspi: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts index 30128051d0c0..0b96d6d4fe71 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -116,19 +116,19 @@ 3 0 0x5 0x20000000 0x00010000>; status = "okay"; - nor@0,0 { + nor@0 { compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; bank-width = <2>; device-width = <1>; }; - nand@2,0 { + nand@200000000 { compatible = "fsl,ifc-nand"; reg = <0x2 0x0 0x10000>; }; - fpga: board-control@3,0 { + fpga: board-control@300000000 { compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis"; reg = <0x3 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 4f17601b919c..3d57008e70e8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -99,12 +99,12 @@ 2 0 0x5 0x20000000 0x00010000>; status = "okay"; - nand@0,0 { + nand@0 { compatible = "fsl,ifc-nand"; reg = <0x0 0x0 0x10000>; }; - fpga: board-control@2,0 { + fpga: board-control@200000000 { compatible = "fsl,ls1088ardb-fpga", "fsl,fpga-qixis"; reg = <0x2 0x0 0x0000100>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 4fc150cd4ca5..1c6556bcfddf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -130,7 +130,7 @@ CPU_PH20: cpu-ph20 { compatible = "arm,idle-state"; idle-state-name = "PH20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <1000>; exit-latency-us = <1000>; min-residency-us = <3000>; @@ -158,6 +158,44 @@ }; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ @@ -315,44 +353,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - thermal-sensors = <&tmu 0>; - - trips { - cpu_alert: cpu-alert { - temperature = <85000>; - hysteresis = <2000>; - type = "passive"; - }; - - cpu_crit: cpu-crit { - temperature = <95000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; @@ -612,6 +612,62 @@ <0000 0 0 3 &gic 0 0 0 121 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 0 0 122 IRQ_TYPE_LEVEL_HIGH>; }; + + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core2_watchdog: wdt@c020000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc020000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core3_watchdog: wdt@c030000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc030000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core2_watchdog: wdt@c120000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc120000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core3_watchdog: wdt@c130000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc130000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; }; firmware { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi index aeaef01d375f..0884e1a77901 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -143,7 +143,7 @@ CPU_PW20: cpu-pw20 { compatible = "arm,idle-state"; idle-state-name = "PW20"; - arm,psci-suspend-param = <0x00010000>; + arm,psci-suspend-param = <0x0>; entry-latency-us = <2000>; exit-latency-us = <2000>; min-residency-us = <6000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi index b2374469a830..5ac34126bfe1 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -58,7 +58,7 @@ 0x2 0x0 0x5 0x30000000 0x00010000 0x3 0x0 0x5 0x20000000 0x00010000>; - nor@0,0 { + nor@0 { #address-cells = <1>; #size-cells = <1>; compatible = "cfi-flash"; @@ -67,12 +67,12 @@ device-width = <1>; }; - nand@2,0 { + nand@200000000 { compatible = "fsl,ifc-nand"; reg = <0x2 0x0 0x10000>; }; - cpld@3,0 { + cpld@300000000 { reg = <0x3 0x0 0x10000>; compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; }; @@ -140,21 +140,21 @@ &dspi { status = "okay"; - dflash0: n25q128a { + dflash0: n25q128a@0 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <0>; }; - dflash1: sst25wf040b { + dflash1: sst25wf040b@1 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <3000000>; reg = <1>; }; - dflash2: en25s64 { + dflash2: en25s64@2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80"; @@ -177,7 +177,7 @@ #size-cells = <1>; compatible = "st,m25p80"; spi-max-frequency = <20000000>; - reg = <0>; + reg = <2>; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index f3a40af33af8..137ef4dfc3e9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -111,6 +111,55 @@ mask = <0x2>; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ @@ -194,55 +243,6 @@ #thermal-sensor-cells = <1>; }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 4>; - - trips { - cpu_alert: cpu-alert { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <85000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; diff --git a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi index c3c2be4f5072..ae15307f6e8b 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-bman-portals.dtsi @@ -68,4 +68,10 @@ reg = <0x80000 0x4000>, <0x4080000 0x4000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; }; + + bman-portal@90000 { + compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + }; }; diff --git a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi index 2a9aa060efda..6a93a4a9be0e 100644 --- a/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi +++ b/arch/arm64/boot/dts/freescale/qoriq-qman-portals.dtsi @@ -77,4 +77,11 @@ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; cell-index = <8>; }; + + qportal9: qman-portal@90000 { + compatible = "fsl,qman-portal"; + reg = <0x90000 0x4000>, <0x4090000 0x4000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + cell-index = <9>; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 63d4f9dca77f..4ce4c282e19e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -100,11 +100,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -114,11 +110,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -128,11 +120,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; @@ -142,25 +130,13 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&A73_L2>; - cpu-idle-states = < - &CPU_NAP - &CPU_SLEEP - &CLUSTER_SLEEP_1 - >; + cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP_1>; capacity-dmips-mhz = <1024>; }; idle-states { entry-method = "psci"; - CPU_NAP: cpu-nap { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x0000001>; - entry-latency-us = <7>; - exit-latency-us = <2>; - min-residency-us = <15>; - }; - CPU_SLEEP: cpu-sleep { compatible = "arm,idle-state"; local-timer-stop; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e94fa1a53192..724a0d3b7683 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -51,7 +51,7 @@ #size-cells = <2>; ranges; - ramoops@0x21f00000 { + ramoops@21f00000 { compatible = "ramoops"; reg = <0x0 0x21f00000 0x0 0x00100000>; record-size = <0x00020000>; @@ -299,7 +299,9 @@ /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ dwmmc_0: dwmmc0@f723d000 { + max-frequency = <150000000>; cap-mmc-highspeed; + mmc-hs200-1_8v; non-removable; bus-width = <0x8>; vmmc-supply = <&ldo19>; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 6a180d1926e8..586b281cd531 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -88,8 +88,6 @@ next-level-cache = <&CLUSTER0_L2>; clocks = <&stub_clock 0>; operating-points-v2 = <&cpu_opp_table>; - cooling-min-level = <4>; - cooling-max-level = <0>; #cooling-cells = <2>; /* min followed by max */ cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>; dynamic-power-coefficient = <311>; @@ -817,6 +815,14 @@ pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>; }; + watchdog0: watchdog@f8005000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xf8005000 0x0 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ao_ctrl HI6220_WDT0_PCLK>; + clock-names = "apb_pclk"; + }; + tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi index a049b64f2101..35202ebe62a7 100644 --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi @@ -291,6 +291,13 @@ #interrupt-cells = <2>; num-pins = <128>; }; + + mbigen_pcie0: intc_pcie0 { + msi-parent = <&its_dsa 0x40085>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <10>; + }; }; mbigen_dsa@c0080000 { @@ -312,6 +319,31 @@ }; }; + /** + * HiSilicon erratum 161010801: This describes the limitation + * of HiSilicon platforms hip06/hip07 to support the SMMUv3 + * mappings for PCIe MSI transactions. + * PCIe controller on these platforms has to differentiate the + * MSI payload against other DMA payload and has to modify the + * MSI payload. This makes it difficult for these platforms to + * have a SMMU translation for MSI. In order to workaround this, + * ARM SMMUv3 driver requires a quirk to treat the MSI regions + * separately. Such a quirk is currently missing for DT based + * systems. Hence please make sure that the smmu pcie node on + * hip06 is disabled as this will break the PCIe functionality + * when iommu-map entry is used along with the PCIe node. + * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html + */ + smmu0: smmu_pcie { + compatible = "arm,smmu-v3"; + reg = <0x0 0xa0040000 0x0 0x20000>; + #iommu-cells = <1>; + dma-coherent; + smmu-cb-memtype = <0x0 0x1>; + hisilicon,broken-prefetch-cmd; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -676,6 +708,30 @@ <637 1>,<638 1>,<639 1>; status = "disabled"; }; + + pcie0: pcie@a0090000 { + compatible = "hisilicon,hip06-pcie-ecam"; + reg = <0 0xb0000000 0 0x2000000>, + <0 0xa0090000 0 0x10000>; + bus-range = <0 31>; + msi-map = <0x0000 &its_dsa 0x0000 0x2000>; + msi-map-mask = <0xffff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + ranges = <0x02000000 0 0xb2000000 0x0 0xb2000000 0 + 0x5ff0000 0x01000000 0 0 0 0xb7ff0000 + 0 0x10000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &mbigen_pcie0 650 4 + 0x0 0 0 2 &mbigen_pcie0 650 4 + 0x0 0 0 3 &mbigen_pcie0 650 4 + 0x0 0 0 4 &mbigen_pcie0 650 4>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi b/arch/arm64/boot/dts/hisilicon/hip07.dtsi index 2c01a21c3665..0600a6a84ab7 100644 --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi @@ -1083,6 +1083,31 @@ }; }; + /** + * HiSilicon erratum 161010801: This describes the limitation + * of HiSilicon platforms hip06/hip07 to support the SMMUv3 + * mappings for PCIe MSI transactions. + * PCIe controller on these platforms has to differentiate the + * MSI payload against other DMA payload and has to modify the + * MSI payload. This makes it difficult for these platforms to + * have a SMMU translation for MSI. In order to workaround this, + * ARM SMMUv3 driver requires a quirk to treat the MSI regions + * separately. Such a quirk is currently missing for DT based + * systems. Hence please make sure that the smmu pcie node on + * hip07 is disabled as this will break the PCIe functionality + * when iommu-map entry is used along with the PCIe node. + * Refer:https://www.spinics.net/lists/arm-kernel/msg602812.html + */ + smmu0: smmu_pcie { + compatible = "arm,smmu-v3"; + reg = <0x0 0xa0040000 0x0 0x20000>; + #iommu-cells = <1>; + dma-coherent; + smmu-cb-memtype = <0x0 0x1>; + hisilicon,broken-prefetch-cmd; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; @@ -1127,6 +1152,12 @@ reg = <0x0 0xc0000000 0x0 0x10000>; }; + dsa_cpld: dsa_cpld@78000010 { + compatible = "syscon"; + reg = <0x0 0x78000010 0x0 0x100>; + reg-io-width = <2>; + }; + pcie_subctl: pcie_subctl@a0000000 { compatible = "hisilicon,pcie-sas-subctrl", "syscon"; reg = <0x0 0xa0000000 0x0 0x10000>; @@ -1258,6 +1289,7 @@ port@0 { reg = <0>; serdes-syscon = <&serdes_ctrl>; + cpld-syscon = <&dsa_cpld 0x0>; port-rst-offset = <0>; port-mode-offset = <0>; mc-mac-mask = [ff f0 00 00 00 00]; @@ -1267,6 +1299,7 @@ port@1 { reg = <1>; serdes-syscon= <&serdes_ctrl>; + cpld-syscon = <&dsa_cpld 0x4>; port-rst-offset = <1>; port-mode-offset = <1>; mc-mac-mask = [ff f0 00 00 00 00]; diff --git a/arch/arm64/boot/dts/marvell/armada-371x.dtsi b/arch/arm64/boot/dts/marvell/armada-371x.dtsi index 11226f7b9ed9..dc1182ec9fa1 100644 --- a/arch/arm64/boot/dts/marvell/armada-371x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-371x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 371x family of SoCs * (also named 88F3710) @@ -6,43 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 0f3468e777f7..f2cc00594d64 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Marvell Armada 3720 development board * (DB-88F3720-DDR3) @@ -5,44 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - * * This file is compatible with the version 1.4 and the version 2.0 of * the board, however the CON numbers are different between the 2 * version diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index bdfb5553ddb5..31efd6a96e9d 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -1,46 +1,10 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree file for Globalscale Marvell ESPRESSOBin Board * Copyright (C) 2016 Marvell * * Romain Perier <romain.perier@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 2554e0baea6b..97558a64e276 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 372x family of SoCs * (also named 88F3720) @@ -6,43 +7,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "armada-37xx.dtsi" diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 375026867342..97207a61bc79 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Device Tree Include file for Marvell Armada 37xx family of SoCs. * @@ -5,43 +6,6 @@ * * Gregory CLEMENT <gregory.clement@free-electrons.com> * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/arch/arm64/boot/dts/marvell/armada-7020.dtsi b/arch/arm64/boot/dts/marvell/armada-7020.dtsi index 4ab012991d9d..4e46326dd123 100644 --- a/arch/arm64/boot/dts/marvell/armada-7020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7020.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 7020 SoC, made of an AP806 Dual and * one CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 3ae05eee2c9a..d6bec058a30a 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada 7040 Development board platform */ @@ -162,36 +123,48 @@ }; }; -&cp0_nand { +&cp0_nand_controller { /* * SPI on CPM and NAND have common pins on this board. We can - * use only one at a time. To enable the NAND (whihch will + * use only one at a time. To enable the NAND (which will * disable the SPI), the "status = "okay";" line have to be * added here. */ - num-cs = <1>; pinctrl-0 = <&nand_pins>, <&nand_rb>; pinctrl-names = "default"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xe00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + + }; }; }; - &cp0_spi1 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi index cbe460b8fc00..47247215770d 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 7040 SoC, made of an AP806 Quad and * one CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi index f63b4fbd642b..e5c6d7c25819 100644 --- a/arch/arm64/boot/dts/marvell/armada-70x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-70x0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 70x0 SoC */ diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 3318d6b0214b..ba1307c0fadb 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and * two CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index dba55baff20f..5689fb23bbab 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada 8040 Development board platform */ @@ -279,27 +240,35 @@ * Proper NAND usage will require DPR-76 to be in position 1-2, which disables * MDIO signal of CP1. */ -&cp1_nand { - num-cs = <1>; +&cp1_nand_controller { pinctrl-0 = <&nand_pins>, <&nand_rb>; pinctrl-names = "default"; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - marvell,nand-enable-arbiter; - marvell,system-controller = <&cp1_syscon0>; - nand-on-flash-bbt; - - partition@0 { - label = "U-Boot"; - reg = <0 0x200000>; - }; - partition@200000 { - label = "Linux"; - reg = <0x200000 0xe00000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts index 626e9d0462c3..81de03ef860d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for MACCHIATOBin Armada 8040 community board platform */ @@ -49,7 +10,7 @@ #include <dt-bindings/gpio/gpio.h> / { - model = "Marvell 8040 MACHIATOBin"; + model = "Marvell 8040 MACCHIATOBin"; compatible = "marvell,armada8040-mcbin", "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; @@ -163,6 +124,13 @@ }; }; +/* J25 UART header */ +&cp0_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&cp0_uart1_pins>; + status = "okay"; +}; + &cp0_mdio { pinctrl-names = "default"; pinctrl-0 = <&cp0_ge_mdio_pins>; @@ -195,6 +163,10 @@ marvell,pins = "mpp37", "mpp38"; marvell,function = "i2c0"; }; + cp0_uart1_pins: uart1-pins { + marvell,pins = "mpp40", "mpp41"; + marvell,function = "uart1"; + }; cp0_xhci_vbus_pins: xhci0-vbus-pins { marvell,pins = "mpp47"; marvell,function = "gpio"; @@ -290,6 +262,17 @@ marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16"; marvell,function = "spi1"; }; + cp1_uart0_pins: uart0-pins { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "uart0"; + }; +}; + +/* J27 UART header */ +&cp1_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&cp1_uart0_pins>; + status = "okay"; }; &cp1_sata0 { diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 83d2b40e5981..7699b19224c2 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 8040 SoC, made of an AP806 Quad and * two CP110. */ diff --git a/arch/arm64/boot/dts/marvell/armada-8080-db.dts b/arch/arm64/boot/dts/marvell/armada-8080-db.dts index 85b58a19a9fb..4ba158f415ce 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8080-db.dts @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada-8080 Development board platform */ diff --git a/arch/arm64/boot/dts/marvell/armada-8080.dtsi b/arch/arm64/boot/dts/marvell/armada-8080.dtsi index d5535b716735..299e814d1ded 100644 --- a/arch/arm64/boot/dts/marvell/armada-8080.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8080.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada-8080 SoC, made of an AP810 OCTA. */ diff --git a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi index e9c84a1d3c4d..8129b40f12a4 100644 --- a/arch/arm64/boot/dts/marvell/armada-80x0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-80x0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for the Armada 80x0 SoC family */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi index b98ea137371d..64b5e61a698e 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-dual.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi index 116164ff260f..746e792767f5 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806-quad.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index f9b66b81f9fc..176e38d54872 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP806. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi index 7f0661e12f5e..7d00ae78fc79 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0-octa-core.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP810 OCTA cores. */ diff --git a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi index 7e6f039f0f80..8107d120a8a7 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap810-ap0.dtsi @@ -1,46 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2017 Marvell Technology Group Ltd. * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* * Device Tree file for Marvell Armada AP810. */ diff --git a/arch/arm64/boot/dts/marvell/armada-common.dtsi b/arch/arm64/boot/dts/marvell/armada-common.dtsi index c6dd1d81c68d..d5e8aedec188 100644 --- a/arch/arm64/boot/dts/marvell/armada-common.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-common.dtsi @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. */ diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index a8af4136dbe7..355bb295e4d9 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -1,9 +1,7 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR X11) +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Marvell Technology Group Ltd. - */ - -/* + * * Device Tree file for Marvell Armada CP110. */ @@ -232,7 +230,8 @@ "generic-ahci"; reg = <0x540000 0x30000>; interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 15>; + clocks = <&CP110_LABEL(clk) 1 15>, + <&CP110_LABEL(clk) 1 16>; status = "disabled"; }; @@ -257,7 +256,9 @@ reg = <0x700600 0x50>; #address-cells = <0x1>; #size-cells = <0x0>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -266,7 +267,9 @@ reg = <0x700680 0x50>; #address-cells = <1>; #size-cells = <0>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "axi"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -276,7 +279,9 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <ICU_GRP_NSR 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; @@ -286,21 +291,71 @@ #address-cells = <1>; #size-cells = <0>; interrupts = <ICU_GRP_NSR 121 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CP110_LABEL(clk) 1 21>; + clock-names = "core", "reg"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart0): serial@702000 { + compatible = "snps,dw-apb-uart"; + reg = <0x702000 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 122 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart1): serial@702100 { + compatible = "snps,dw-apb-uart"; + reg = <0x702100 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 123 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(uart2): serial@702200 { + compatible = "snps,dw-apb-uart"; + reg = <0x702200 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 124 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; status = "disabled"; }; - CP110_LABEL(nand): nand@720000 { + CP110_LABEL(uart3): serial@702300 { + compatible = "snps,dw-apb-uart"; + reg = <0x702300 0x100>; + reg-shift = <2>; + interrupts = <ICU_GRP_NSR 125 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&CP110_LABEL(clk) 1 21>, + <&CP110_LABEL(clk) 1 17>; + status = "disabled"; + }; + + CP110_LABEL(nand_controller): nand@720000 { /* * Due to the limitation of the pins available * this controller is only usable on the CPM * for A7K and on the CPS for A8K. */ - compatible = "marvell,armada-8k-nand", - "marvell,armada370-nand"; + compatible = "marvell,armada-8k-nand-controller", + "marvell,armada370-nand-controller"; reg = <0x720000 0x54>; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; interrupts = <ICU_GRP_NSR 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&CP110_LABEL(clk) 1 2>; marvell,system-controller = <&CP110_LABEL(syscon0)>; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 9fbe4705ee88..94597e33c806 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -341,7 +341,7 @@ reg = <0 0x10005000 0 0x1000>; }; - pio: pinctrl@0x10005000 { + pio: pinctrl@10005000 { compatible = "mediatek,mt8173-pinctrl"; reg = <0 0x1000b000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a>; diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile index 676aa2f238d1..7c13d7df484e 100644 --- a/arch/arm64/boot/dts/nvidia/Makefile +++ b/arch/arm64/boot/dts/nvidia/Makefile @@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb +dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi new file mode 100644 index 000000000000..ecb034177fc2 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include <dt-bindings/mfd/max77620.h> + +/ { + model = "NVIDIA Tegra194 P2888 Processor Module"; + compatible = "nvidia,p2888", "nvidia,tegra194"; + + aliases { + sdhci0 = "/cbb/sdhci@3460000"; + sdhci1 = "/cbb/sdhci@3400000"; + serial0 = &uartb; + i2c0 = "/bpmp/i2c"; + i2c1 = "/cbb/i2c@3160000"; + i2c2 = "/cbb/i2c@c240000"; + i2c3 = "/cbb/i2c@3180000"; + i2c4 = "/cbb/i2c@3190000"; + i2c5 = "/cbb/i2c@31c0000"; + i2c6 = "/cbb/i2c@c250000"; + i2c7 = "/cbb/i2c@31e0000"; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + cbb { + serial@3110000 { + status = "okay"; + }; + + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { +/* + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; +*/ + }; + + /* SDMMC4 (eMMC) */ + sdhci@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8ls>; + vmmc-supply = <&vdd_emmc_3v3>; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + sd0 { + regulator-name = "VDD_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + sd1 { + regulator-name = "VDD_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDD_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "VDD_1V8AO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDD_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_emmc_3v3: ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "VDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts new file mode 100644 index 000000000000..9ff3c18280c4 --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "tegra194-p2888.dtsi" + +/ { + model = "NVIDIA Tegra194 P2972-0000 Development Board"; + compatible = "nvidia,p2972-0000", "nvidia,tegra194"; + + cbb { + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi new file mode 100644 index 000000000000..6322ef265c2f --- /dev/null +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi @@ -0,0 +1,344 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/clock/tegra194-clock.h> +#include <dt-bindings/gpio/tegra194-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/reset/tegra194-reset.h> + +/ { + compatible = "nvidia,tegra194"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + /* control backbone */ + cbb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + uarta: serial@3100000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03100000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTA>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTA>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@3110000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03110000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTB>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTB>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@3130000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03130000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTD>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTD>; + reset-names = "serial"; + status = "disabled"; + }; + + uarte: serial@3140000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03140000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTE>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTE>; + reset-names = "serial"; + status = "disabled"; + }; + + uartf: serial@3150000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03150000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTF>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTF>; + reset-names = "serial"; + status = "disabled"; + }; + + gen1_i2c: i2c@3160000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03160000 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C1>; + reset-names = "i2c"; + status = "disabled"; + }; + + uarth: serial@3170000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x03170000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTH>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTH>; + reset-names = "serial"; + status = "disabled"; + }; + + cam_i2c: i2c@3180000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03180000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C3>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux1 */ + dp_aux_ch1_i2c: i2c@3190000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x03190000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C4>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux0 */ + dp_aux_ch0_i2c: i2c@31b0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031b0000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C6>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen7_i2c: i2c@31c0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031c0000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C7>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C7>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen9_i2c: i2c@31e0000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x031e0000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C9>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C9>; + reset-names = "i2c"; + status = "disabled"; + }; + + sdmmc1: sdhci@3400000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03400000 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC1>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC1>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc3: sdhci@3440000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03440000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC3>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC3>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc4: sdhci@3460000 { + compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + reg = <0x03460000 0x10000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_SDMMC4>; + clock-names = "sdhci"; + resets = <&bpmp TEGRA194_RESET_SDMMC4>; + reset-names = "sdhci"; + status = "disabled"; + }; + + gic: interrupt-controller@3881000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x03881000 0x1000>, + <0x03882000 0x2000>, + <0x03884000 0x2000>, + <0x03886000 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x03c00000 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + }; + + gen2_i2c: i2c@c240000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x0c240000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C2>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen8_i2c: i2c@c250000 { + compatible = "nvidia,tegra194-i2c", "nvidia,tegra114-i2c"; + reg = <0x0c250000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp TEGRA194_CLK_I2C8>; + clock-names = "div-clk"; + resets = <&bpmp TEGRA194_RESET_I2C8>; + reset-names = "i2c"; + status = "disabled"; + }; + + uartc: serial@c280000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x0c280000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTC>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTC>; + reset-names = "serial"; + status = "disabled"; + }; + + uartg: serial@c290000 { + compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; + reg = <0x0c290000 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp TEGRA194_CLK_UARTG>; + clock-names = "serial"; + resets = <&bpmp TEGRA194_RESET_UARTG>; + reset-names = "serial"; + status = "disabled"; + }; + + pmc@c360000 { + compatible = "nvidia,tegra194-pmc"; + reg = <0x0c360000 0x10000>, + <0x0c370000 0x10000>, + <0x0c380000 0x10000>, + <0x0c390000 0x10000>, + <0x0c3a0000 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch", "misc"; + }; + }; + + sysram@40000000 { + compatible = "nvidia,tegra194-sysram", "mmio-sram"; + reg = <0x0 0x40000000 0x0 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x40000000 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra194-bpmp-shmem"; + reg = <0x4e000 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra194-bpmp-shmem"; + reg = <0x4f000 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi index d67ef4319f3b..9d5a0e6b2ca4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi @@ -1325,6 +1325,11 @@ status = "okay"; }; + sata@70020000 { + status = "okay"; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + }; + padctl@7009f000 { status = "okay"; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 9c2402108772..3be920efee82 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -798,6 +798,22 @@ #iommu-cells = <1>; }; + sata@70020000 { + compatible = "nvidia,tegra210-ahci"; + reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ + <0x0 0x70020000 0x0 0x7000>, /* SATA */ + <0x0 0x70001100 0x0 0x1000>; /* SATA AUX */ + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_SATA>, + <&tegra_car TEGRA210_CLK_SATA_OOB>; + clock-names = "sata", "sata-oob"; + resets = <&tegra_car 124>, + <&tegra_car 123>, + <&tegra_car 129>; + reset-names = "sata", "sata-oob", "sata-cold"; + status = "disabled"; + }; + hda@70030000 { compatible = "nvidia,tegra210-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 492a011f14f6..1c8f1b86472d 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -140,16 +140,16 @@ }; agnoc@0 { - qcom,pcie@00600000 { + qcom,pcie@600000 { perst-gpio = <&msmgpio 35 GPIO_ACTIVE_LOW>; }; - qcom,pcie@00608000 { + qcom,pcie@608000 { status = "okay"; perst-gpio = <&msmgpio 130 GPIO_ACTIVE_LOW>; }; - qcom,pcie@00610000 { + qcom,pcie@610000 { status = "okay"; perst-gpio = <&msmgpio 114 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 4b2afcc4fdf4..0a6f7952bbb1 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -840,7 +840,7 @@ #size-cells = <1>; ranges; - pcie0: qcom,pcie@00600000 { + pcie0: qcom,pcie@600000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; status = "disabled"; power-domains = <&gcc PCIE0_GDSC>; @@ -893,7 +893,7 @@ }; - pcie1: qcom,pcie@00608000 { + pcie1: qcom,pcie@608000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE1_GDSC>; bus-range = <0x00 0xff>; @@ -946,7 +946,7 @@ "bus_slave"; }; - pcie2: qcom,pcie@00610000 { + pcie2: qcom,pcie@610000 { compatible = "qcom,pcie-msm8996", "snps,dw-pcie"; power-domains = <&gcc PCIE2_GDSC>; bus-range = <0x00 0xff>; diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile index 2186d0193b73..5ede06000ea4 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile @@ -7,5 +7,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb +dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 26769a11a190..f9acd125d687 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -23,6 +23,7 @@ /delete-node/ mmu@febe0000; /delete-node/ mmu@fe980000; + /delete-node/ mmu@fd950000; /delete-node/ mmu@fd960000; /delete-node/ mmu@fd970000; @@ -80,7 +81,7 @@ vspd3: vsp@fea38000 { compatible = "renesas,vsp2"; - reg = <0 0xfea38000 0 0x4000>; + reg = <0 0xfea38000 0 0x8000>; interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index d12df6f2ff09..1d5e3ac0231c 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -41,6 +41,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -50,6 +53,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_2: cpu@2 { @@ -59,6 +65,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU2>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_3: cpu@3 { @@ -68,6 +77,9 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU3>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -77,6 +89,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@101 { @@ -86,6 +100,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_2: cpu@102 { @@ -95,6 +111,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_3: cpu@103 { @@ -104,6 +122,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7795_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA57: cache-controller-0 { @@ -165,11 +185,59 @@ clock-frequency = <0>; }; - /* External SCIF clock - to be overridden by boards that provide it */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <830000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; }; /* External PCIe clock - can be overridden by the board */ @@ -208,6 +276,13 @@ method = "smc"; }; + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -470,6 +545,15 @@ status = "disabled"; }; + ipmmu_pv1: mmu@fd950000 { + compatible = "renesas,ipmmu-r8a7795"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #iommu-cells = <1>; + status = "disabled"; + }; + ipmmu_pv2: mmu@fd960000 { compatible = "renesas,ipmmu-r8a7795"; reg = <0 0xfd960000 0 0x1000>; @@ -798,7 +882,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -992,8 +1076,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 520>; status = "disabled"; @@ -1009,8 +1094,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x33>, <&dmac1 0x32>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 519>; status = "disabled"; @@ -1026,8 +1112,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x35>, <&dmac1 0x34>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 518>; status = "disabled"; @@ -1138,8 +1225,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x51>, <&dmac1 0x50>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 207>; status = "disabled"; @@ -1154,8 +1242,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x53>, <&dmac1 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 206>; status = "disabled"; @@ -1170,8 +1259,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x13>, <&dmac1 0x12>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 310>; status = "disabled"; @@ -1218,8 +1308,9 @@ <&cpg CPG_CORE R8A7795_CLK_S3D1>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 202>; status = "disabled"; @@ -1251,8 +1342,9 @@ clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 931>; - dmas = <&dmac1 0x91>, <&dmac1 0x90>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <110>; status = "disabled"; }; @@ -1267,8 +1359,9 @@ clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 930>; - dmas = <&dmac1 0x93>, <&dmac1 0x92>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -1283,8 +1376,9 @@ clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 929>; - dmas = <&dmac1 0x95>, <&dmac1 0x94>; - dma-names = "tx", "rx"; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; i2c-scl-internal-delay-ns = <6>; status = "disabled"; }; @@ -2143,7 +2237,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x4000>; + reg = <0 0xfea20000 0 0x8000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2163,7 +2257,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x4000>; + reg = <0 0xfea28000 0 0x8000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2183,7 +2277,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x4000>; + reg = <0 0xfea30000 0 0x8000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2320,9 +2414,9 @@ tsc: thermal@e6198000 { compatible = "renesas,r8a7795-thermal"; - reg = <0 0xe6198000 0 0x68>, - <0 0xe61a0000 0 0x5c>, - <0 0xe61a8000 0 0x5c>; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -2357,12 +2451,24 @@ thermal-sensors = <&tsc 0>; trips { + sensor1_passive: sensor1-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor1_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; sensor_thermal2: sensor-thermal2 { @@ -2371,12 +2477,24 @@ thermal-sensors = <&tsc 1>; trips { + sensor2_passive: sensor2-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor2_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; sensor_thermal3: sensor-thermal3 { @@ -2385,12 +2503,24 @@ thermal-sensors = <&tsc 2>; trips { + sensor3_passive: sensor3-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor3_passive>; + cooling-device = <&a57_0 4 4>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index c5192d513d7d..556eb8e45499 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -71,6 +71,9 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -80,6 +83,9 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU1>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -89,6 +95,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_1: cpu@101 { @@ -98,6 +106,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU1>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_2: cpu@102 { @@ -107,6 +117,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU2>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; a53_3: cpu@103 { @@ -116,6 +128,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU3>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + clocks =<&cpg CPG_CORE R8A7796_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; }; L2_CA57: cache-controller-0 { @@ -147,6 +161,72 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <900000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <960000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + turbo-mode; + }; + }; + /* External PCIe clock - can be overridden by the board */ pcie_bus_clk: pcie_bus { compatible = "fixed-clock"; @@ -894,7 +974,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -1561,9 +1641,9 @@ tsc: thermal@e6198000 { compatible = "renesas,r8a7796-thermal"; - reg = <0 0xe6198000 0 0x68>, - <0 0xe61a0000 0 0x5c>, - <0 0xe61a8000 0 0x5c>; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -1839,7 +1919,7 @@ vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x4000>; + reg = <0 0xfea20000 0 0x8000>; interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1859,7 +1939,7 @@ vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x4000>; + reg = <0 0xfea28000 0 0x8000>; interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1879,7 +1959,7 @@ vspd2: vsp@fea30000 { compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x4000>; + reg = <0 0xfea30000 0 0x8000>; interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -1998,12 +2078,24 @@ thermal-sensors = <&tsc 0>; trips { + sensor1_passive: sensor1-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor1_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; sensor_thermal2: sensor-thermal2 { @@ -2012,12 +2104,24 @@ thermal-sensors = <&tsc 1>; trips { + sensor2_passive: sensor2-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor2_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; sensor_thermal3: sensor-thermal3 { @@ -2026,12 +2130,24 @@ thermal-sensors = <&tsc 2>; trips { + sensor3_passive: sensor3-passive { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&sensor3_passive>; + cooling-device = <&a57_0 5 5>; + }; + }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts new file mode 100644 index 000000000000..75d890d91df9 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X board with R-Car M3-N + * + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "salvator-x.dtsi" + +/ { + model = "Renesas Salvator-X board based on r8a77965"; + compatible = "renesas,salvator-x", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts new file mode 100644 index 000000000000..a83a00deed9e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3-N + * + * Copyright (C) 2017 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a77965.dtsi" +#include "salvator-xs.dtsi" + +/ { + model = "Renesas Salvator-X 2nd version board based on r8a77965"; + compatible = "renesas,salvator-xs", "renesas,r8a77965"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi new file mode 100644 index 000000000000..f0871fcdd984 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -0,0 +1,878 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a77965 SoC + * + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + * + * Based on r8a7796.dtsi + * Copyright (C) 2016 Renesas Electronics Corp. + */ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#define CPG_AUDIO_CLK_I 10 + +/ { + compatible = "renesas,r8a77965"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + i2c7 = &i2c_dvfs; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc 0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc 1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc 12>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77965"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77965-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77965-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77965-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc 32>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc 32>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc 32>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc 32>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc 32>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc 32>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc 32>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a77965", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc 32>; + resets = <&cpg 905>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a77965", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc 32>; + resets = <&cpg 407>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77965", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 64>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + power-domains = <&sysc 32>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a77965", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE 20>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 202>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77965", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + csi20: csi2@fea80000 { + reg = <0 0xfea80000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + csi40: csi2@feaa0000 { + reg = <0 0xfeaa0000 0 0x10000>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vin0: video@e6ef0000 { + reg = <0 0xe6ef0000 0 0x1000>; + /* placeholder */ + }; + + vin1: video@e6ef1000 { + reg = <0 0xe6ef1000 0 0x1000>; + /* placeholder */ + }; + + vin2: video@e6ef2000 { + reg = <0 0xe6ef2000 0 0x1000>; + /* placeholder */ + }; + + vin3: video@e6ef3000 { + reg = <0 0xe6ef3000 0 0x1000>; + /* placeholder */ + }; + + vin4: video@e6ef4000 { + reg = <0 0xe6ef4000 0 0x1000>; + /* placeholder */ + }; + + vin5: video@e6ef5000 { + reg = <0 0xe6ef5000 0 0x1000>; + /* placeholder */ + }; + + vin6: video@e6ef6000 { + reg = <0 0xe6ef6000 0 0x1000>; + /* placeholder */ + }; + + vin7: video@e6ef7000 { + reg = <0 0xe6ef7000 0 0x1000>; + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + /* placeholder */ + }; + + i2c0: i2c@e6500000 { + reg = <0 0xe6500000 0 0x40>; + /* placeholder */ + }; + + i2c1: i2c@e6508000 { + reg = <0 0xe6508000 0 0x40>; + /* placeholder */ + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe6510000 0 0x40>; + /* placeholder */ + }; + + i2c3: i2c@e66d0000 { + reg = <0 0xe66d0000 0 0x40>; + /* placeholder */ + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <0 0xe66d8000 0 0x40>; + /* placeholder */ + }; + + i2c5: i2c@e66e0000 { + reg = <0 0xe66e0000 0 0x40>; + /* placeholder */ + }; + + i2c6: i2c@e66e8000 { + reg = <0 0xe66e8000 0 0x40>; + /* placeholder */ + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a77965", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc 32>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + pwm0: pwm@e6e30000 { + reg = <0 0xe6e30000 0 8>; + /* placeholder */ + }; + + pwm1: pwm@e6e31000 { + reg = <0 0xe6e31000 0 8>; + #pwm-cells = <2>; + /* placeholder */ + }; + + pwm2: pwm@e6e32000 { + reg = <0 0xe6e32000 0 8>; + /* placeholder */ + }; + + pwm3: pwm@e6e33000 { + reg = <0 0xe6e33000 0 8>; + /* placeholder */ + }; + + pwm4: pwm@e6e34000 { + reg = <0 0xe6e34000 0 8>; + /* placeholder */ + }; + + pwm5: pwm@e6e35000 { + reg = <0 0xe6e35000 0 8>; + /* placeholder */ + }; + + pwm6: pwm@e6e36000 { + reg = <0 0xe6e36000 0 8>; + /* placeholder */ + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x80000>, + <0 0xfeb90000 0 0x14>; + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + }; + }; + }; + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x100>; + /* placeholder */ + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + /* placeholder */ + }; + + pciec1: pcie@ee800000 { + reg = <0 0xee800000 0 0x80000>; + /* placeholder */ + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + /* placeholder */ + + rcar_sound,dvc { + dvc0: dvc-0 { + }; + dvc1: dvc-1 { + }; + }; + + rcar_sound,src { + src0: src-0 { + }; + src1: src-1 { + }; + }; + + rcar_sound,ssi { + ssi0: ssi-0 { + }; + ssi1: ssi-1 { + }; + }; + }; + + sdhi0: sd@ee100000 { + reg = <0 0xee100000 0 0x2000>; + /* placeholder */ + }; + + sdhi1: sd@ee120000 { + reg = <0 0xee120000 0 0x2000>; + /* placeholder */ + }; + + sdhi2: sd@ee140000 { + reg = <0 0xee140000 0 0x2000>; + /* placeholder */ + }; + + sdhi3: sd@ee160000 { + reg = <0 0xee160000 0 0x2000>; + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + /* placeholder */ + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + /* placeholder */ + }; + + wdt0: watchdog@e6020000 { + reg = <0 0xe6020000 0 0x0c>; + /* placeholder */ + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 8fe5c193e049..3c5f598c9766 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -36,11 +36,14 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 { rxc-skew-ps = <1500>; reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; }; }; @@ -52,11 +55,41 @@ clock-frequency = <32768>; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + io_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pfc { + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; }; &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 8624ca87d6b2..a8ceeac77992 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -34,6 +34,7 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 { @@ -50,6 +51,16 @@ clock-frequency = <32768>; }; +&pfc { + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index c35a117fc447..c6db8ea43906 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -19,9 +19,12 @@ #address-cells = <2>; #size-cells = <2>; - psci { - compatible = "arm,psci-1.0", "arm,psci-0.2"; - method = "smc"; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; }; cpus { @@ -60,6 +63,11 @@ clock-frequency = <0>; }; + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + /* External SCIF clock - to be overridden by boards that provide it */ scif_clk: scif { compatible = "fixed-clock"; @@ -92,18 +100,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | - IRQ_TYPE_LEVEL_LOW)>; - }; - rwdt: watchdog@e6020000 { compatible = "renesas,r8a77970-wdt", "renesas,rcar-gen3-wdt"; @@ -178,6 +174,101 @@ #iommu-cells = <1>; }; + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77970"; + reg = <0 0xe6060000 0 0x504>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 22>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 17>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 6>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77970", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + intc_ex: interrupt-controller@e61c0000 { compatible = "renesas,intc-ex-r8a77970", "renesas,irqc"; #interrupt-cells = <2>; @@ -255,6 +346,91 @@ <&ipmmu_ds1 22>, <&ipmmu_ds1 23>; }; + i2c0: i2c@e6500000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac1 0x97>, <&dmac1 0x96>, + <&dmac2 0x97>, <&dmac2 0x96>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + compatible = "renesas,i2c-r8a77970", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac1 0x99>, <&dmac1 0x98>, + <&dmac2 0x99>, <&dmac2 0x98>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + hscif0: serial@e6540000 { compatible = "renesas,hscif-r8a77970", "renesas,rcar-gen3-hscif", @@ -400,7 +576,7 @@ avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77970", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -436,10 +612,18 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; iommus = <&ipmmu_rt 3>; #address-cells = <1>; #size-cells = <0>; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts new file mode 100644 index 000000000000..06cf6845765a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -0,0 +1,58 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the Condor board + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +/dts-v1/; +#include "r8a77980.dtsi" + +/ { + model = "Renesas Condor board based on r8a77980"; + compatible = "renesas,condor", "renesas,r8a77980"; + + aliases { + serial0 = &scif0; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; +}; + +&avb { + phy-mode = "rgmii-id"; + phy-handle = <&phy0>; + renesas,no-ether-link; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&scif0 { + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi new file mode 100644 index 000000000000..03845fd74996 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a77980 SoC + * + * Copyright (C) 2018 Renesas Electronics Corp. + * Copyright (C) 2018 Cogent Embedded, Inc. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/ { + compatible = "renesas,r8a77980"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a53_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0>; + clocks = <&cpg CPG_CORE 0>; + power-domains = <&sysc 5>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA53: cache-controller { + compatible = "cache"; + power-domains = <&sysc 21>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a77980-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a77980-rst"; + reg = <0 0xe6160000 0 0x200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a77980-sysc"; + reg = <0 0xe6180000 0 0x440>; + #power-domain-cells = <1>; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77980", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x37>, <&dmac1 0x36>, + <&dmac2 0x37>, <&dmac2 0x36>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 517>; + status = "disabled"; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a77980", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc 32>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x57>, <&dmac1 0x56>, + <&dmac2 0x57>, <&dmac2 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a77980", + "renesas,rcar-gen3-scif", + "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE 19>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x59>, <&dmac1 0x58>, + <&dmac2 0x59>, <&dmac2 0x58>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc 32>; + resets = <&cpg 203>; + status = "disabled"; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a77980", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a77980", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc 32>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc 32>; + resets = <&cpg 408>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | + IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 09de73b11db8..d03f19414028 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -27,11 +27,61 @@ stdout-path = "serial0:115200n8"; }; + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x18000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; }; &extal_clk { @@ -46,6 +96,21 @@ }; }; + du_pins: du { + groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; + function = "du"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + pwm0_pins: pwm0 { groups = "pwm0_c"; function = "pwm0"; @@ -61,12 +126,56 @@ function = "scif2"; }; + sdhi2_pins: sd2 { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <1800>; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; }; +&i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7123_in>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -80,6 +189,7 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -97,6 +207,20 @@ status = "okay"; }; +&sdhi2 { + /* used for on-board eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index cff42cd1a6c8..82aed7ee984c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -58,6 +58,11 @@ clock-frequency = <0>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + }; + scif_clk: scif { compatible = "fixed-clock"; #clock-cells = <0>; @@ -88,18 +93,6 @@ resets = <&cpg 408>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; - }; - rwdt: watchdog@e6020000 { compatible = "renesas,r8a77995-wdt", "renesas,rcar-gen3-wdt"; @@ -110,11 +103,6 @@ status = "disabled"; }; - pmu_a53 { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - }; - ipmmu_vi0: mmu@febd0000 { compatible = "renesas,ipmmu-r8a77995"; reg = <0 0xfebd0000 0 0x1000>; @@ -488,7 +476,7 @@ avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77995", "renesas,etheravb-rcar-gen3"; - reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>; + reg = <0 0xe6800000 0 0x800>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, @@ -524,7 +512,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; @@ -548,6 +536,73 @@ status = "disabled"; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77995", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a77995", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -636,5 +691,105 @@ #phy-cells = <0>; status = "disabled"; }; + + vspbs: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 627>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 627>; + renesas,fcp = <&fcpvb0>; + }; + + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x8000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 603>; + iommus = <&ipmmu_vi0 8>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x8000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; + }; + + fcpvd1: fcp@fea2f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea2f000 0 0x200>; + clocks = <&cpg CPG_MOD 602>; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 602>; + iommus = <&ipmmu_vi0 9>; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a77995"; + reg = <0 0xfeb00000 0 0x80000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>; + clock-names = "du.0", "du.1"; + vsps = <&vspd0 0 &vspd1 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + + port@1 { + reg = <1>; + du_out_lvds0: endpoint { + }; + }; + + port@2 { + reg = <2>; + du_out_lvds1: endpoint { + }; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index c3fafb6025b3..2a7f36abd2dd 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -256,6 +256,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { @@ -338,6 +339,13 @@ &i2c4 { status = "okay"; + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + csa_vdd: adc@7c { compatible = "maxim,max9611"; reg = <0x7c>; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 3e7a6b94e9f8..6f814845f8b6 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -146,6 +146,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 { diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts index 3890468678ce..28257724a56e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts @@ -132,17 +132,16 @@ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>; assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>; clock_in_out = "input"; - /* shows instability at 1GBit right now */ - max-speed = <100>; phy-supply = <&vcc_io>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; + snps,force_thresh_dma_mode; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x26>; - rx_delay = <0x11>; + tx_delay = <0x24>; + rx_delay = <0x18>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index a037ee56fead..cae341554486 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -730,7 +730,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; @@ -741,7 +741,7 @@ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; @@ -752,7 +752,7 @@ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index aa4d07046a7b..03458ac44201 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -257,7 +257,7 @@ max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; - clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; resets = <&cru SRST_SDIO0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 0f873c897d0d..ce592a4c0c4c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -457,7 +457,7 @@ assigned-clocks = <&cru SCLK_PCIEPHY_REF>; assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; assigned-clock-rates = <100000000>; - ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>; + ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>; num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&pcie_clkreqn_cpm>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 7aa2144e0d47..2605118d4b4c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1739,8 +1739,8 @@ compatible = "rockchip,rk3399-edp"; reg = <0x0 0xff970000 0x0 0x8000>; interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>; - clock-names = "dp", "pclk"; + clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>; + clock-names = "dp", "pclk", "grf"; pinctrl-names = "default"; pinctrl-0 = <&edp_hpd>; power-domains = <&power RK3399_PD_EDP>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 2452b2243f42..9b4dc41703e3 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -1,14 +1,13 @@ -/* - * Device Tree Source for UniPhier LD11 Global Board - * - * Copyright (C) 2016-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 Global Board +// +// Copyright (C) 2016-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> +// Kunihiko Hayashi <hayashi.kunihiko@socionext.com> /dts-v1/; +#include <dt-bindings/gpio/uniphier-gpio.h> #include "uniphier-ld11.dtsi" / { @@ -37,6 +36,53 @@ device_type = "memory"; reg = <0 0x80000000 0 0x40000000>; }; + + dvdd_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "DVDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp_vcc_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "AMP_VCC"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier LD11"; + widgets = "Headphone", "Headphone Jack"; + dais = <&i2s_port2 + &i2s_port3 + &i2s_port4 + &spdif_port0 + &comp_spdif_port0>; + }; + + spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + spdif_tx: endpoint { + remote-endpoint = <&spdif_hiecout1>; + }; + }; + }; + + comp-spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + comp_spdif_tx: endpoint { + remote-endpoint = <&comp_spdif_hiecout1>; + }; + }; + }; }; &serial0 { @@ -47,9 +93,43 @@ status = "okay"; }; +&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + +&spdif_hiecout1 { + remote-endpoint = <&spdif_tx>; +}; + +&comp_spdif_hiecout1 { + remote-endpoint = <&comp_spdif_tx>; +}; + &i2c0 { status = "okay"; + tas5707a@1d { + compatible = "ti,tas5711"; + reg = <0x1d>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 4) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(23, 5) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&dvdd_reg>; + DVDD-supply = <&dvdd_reg>; + PVDD_A-supply = <&_vcc_reg>; + PVDD_B-supply = <&_vcc_reg>; + PVDD_C-supply = <&_vcc_reg>; + PVDD_D-supply = <&_vcc_reg>; + + port@0 { + tas_speaker: endpoint { + dai-format = "i2s"; + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; + eeprom@50 { compatible = "st,24c64", "atmel,24c64"; reg = <0x50>; @@ -69,6 +149,17 @@ status = "okay"; }; +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; + &nand { status = "okay"; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 54c53170699a..b8f627348448 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD11 Reference Board - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 Reference Board +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld11.dtsi" @@ -70,3 +68,14 @@ &usb2 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index cd7c2d0a1f64..efa95573b2aa 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD11 SoC - * - * Copyright (C) 2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD11 SoC +// +// Copyright (C) 2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -187,6 +185,91 @@ <21 217 3>; }; + audio@56000000 { + compatible = "socionext,uniphier-ld11-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout1>, + <&pinctrl_aoutiec1>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + + i2s_port0: port@0 { + i2s_hdmi: endpoint { + }; + }; + + i2s_port1: port@1 { + i2s_pcmin2: endpoint { + }; + }; + + i2s_port2: port@2 { + i2s_line: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_line>; + }; + }; + + i2s_port3: port@3 { + i2s_hpcmout1: endpoint { + }; + }; + + i2s_port4: port@4 { + i2s_hp: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_hp>; + }; + }; + + spdif_port0: port@5 { + spdif_hiecout1: endpoint { + }; + }; + + src_port0: port@6 { + i2s_epcmout2: endpoint { + }; + }; + + src_port1: port@7 { + i2s_epcmout3: endpoint { + }; + }; + + comp_spdif_port0: port@8 { + comp_spdif_hiecout1: endpoint { + }; + }; + }; + + codec@57900000 { + compatible = "socionext,uniphier-evea"; + reg = <0x57900000 0x1000>; + clock-names = "evea", "exiv"; + clocks = <&sys_clk 41>, <&sys_clk 42>; + reset-names = "evea", "exiv", "adamv"; + resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>; + #sound-dai-cells = <1>; + + port@0 { + evea_line: endpoint { + remote-endpoint = <&i2s_line>; + }; + }; + + port@1 { + evea_hp: endpoint { + remote-endpoint = <&i2s_hp>; + }; + }; + }; + adamv@57920000 { compatible = "socionext,uniphier-ld11-adamv", "simple-mfd", "syscon"; @@ -460,6 +543,22 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-ld11-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -475,3 +574,12 @@ }; #include "uniphier-pinctrl.dtsi" + +&pinctrl_aoutiec1 { + drive-strength = <4>; /* default: 4mA */ + + ao1arc { + pins = "AO1ARC"; + drive-strength = <8>; /* 8mA */ + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fc2bc9d75d35..fe6608ea3277 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -1,14 +1,13 @@ -/* - * Device Tree Source for UniPhier LD20 Global Board - * - * Copyright (C) 2015-2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 Global Board +// +// Copyright (C) 2015-2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> +// Kunihiko Hayashi <hayashi.kunihiko@socionext.com> /dts-v1/; +#include <dt-bindings/gpio/uniphier-gpio.h> #include "uniphier-ld20.dtsi" / { @@ -37,6 +36,53 @@ device_type = "memory"; reg = <0 0x80000000 0 0xc0000000>; }; + + dvdd_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "DVDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp_vcc_reg: reg-fixed { + compatible = "regulator-fixed"; + regulator-name = "AMP_VCC"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + sound { + compatible = "audio-graph-card"; + label = "UniPhier LD20"; + widgets = "Headphone", "Headphone Jack"; + dais = <&i2s_port2 + &i2s_port3 + &i2s_port4 + &spdif_port0 + &comp_spdif_port0>; + }; + + spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + spdif_tx: endpoint { + remote-endpoint = <&spdif_hiecout1>; + }; + }; + }; + + comp-spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + + port@0 { + comp_spdif_tx: endpoint { + remote-endpoint = <&comp_spdif_hiecout1>; + }; + }; + }; }; &serial0 { @@ -47,8 +93,55 @@ status = "okay"; }; +&i2s_hpcmout1 { + dai-format = "i2s"; + remote-endpoint = <&tas_speaker>; +}; + +&spdif_hiecout1 { + remote-endpoint = <&spdif_tx>; +}; + +&comp_spdif_hiecout1 { + remote-endpoint = <&comp_spdif_tx>; +}; + &i2c0 { status = "okay"; + + tas5707@1b { + compatible = "ti,tas5711"; + reg = <0x1b>; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 0) GPIO_ACTIVE_LOW>; + pdn-gpios = <&gpio UNIPHIER_GPIO_PORT(0, 1) GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + AVDD-supply = <&dvdd_reg>; + DVDD-supply = <&dvdd_reg>; + PVDD_A-supply = <&_vcc_reg>; + PVDD_B-supply = <&_vcc_reg>; + PVDD_C-supply = <&_vcc_reg>; + PVDD_D-supply = <&_vcc_reg>; + + port@0 { + tas_speaker: endpoint { + dai-format = "i2s"; + remote-endpoint = <&i2s_hpcmout1>; + }; + }; + }; +}; + +ð { + status = "okay"; + phy-mode = "rmii"; + pinctrl-0 = <&pinctrl_ether_rmii>; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@1 { + reg = <1>; + }; }; &nand { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 693371033c90..2c1a92fafbfb 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD20 Reference Board - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 Reference Board +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-ld20.dtsi" @@ -58,3 +56,14 @@ &i2c0 { status = "okay"; }; + +ð { + status = "okay"; + phy-handle = <ðphy>; +}; + +&mdio { + ethphy: ethphy@0 { + reg = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index 8a3276ba2da1..19c935688a77 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier LD20 SoC - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier LD20 SoC +// +// Copyright (C) 2015-2016 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> @@ -287,6 +285,91 @@ <21 217 3>; }; + audio@56000000 { + compatible = "socionext,uniphier-ld20-aio"; + reg = <0x56000000 0x80000>; + interrupts = <0 144 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aout1>, + <&pinctrl_aoutiec1>; + clock-names = "aio"; + clocks = <&sys_clk 40>; + reset-names = "aio"; + resets = <&sys_rst 40>; + #sound-dai-cells = <1>; + + i2s_port0: port@0 { + i2s_hdmi: endpoint { + }; + }; + + i2s_port1: port@1 { + i2s_pcmin2: endpoint { + }; + }; + + i2s_port2: port@2 { + i2s_line: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_line>; + }; + }; + + i2s_port3: port@3 { + i2s_hpcmout1: endpoint { + }; + }; + + i2s_port4: port@4 { + i2s_hp: endpoint { + dai-format = "i2s"; + remote-endpoint = <&evea_hp>; + }; + }; + + spdif_port0: port@5 { + spdif_hiecout1: endpoint { + }; + }; + + src_port0: port@6 { + i2s_epcmout2: endpoint { + }; + }; + + src_port1: port@7 { + i2s_epcmout3: endpoint { + }; + }; + + comp_spdif_port0: port@8 { + comp_spdif_hiecout1: endpoint { + }; + }; + }; + + codec@57900000 { + compatible = "socionext,uniphier-evea"; + reg = <0x57900000 0x1000>; + clock-names = "evea", "exiv"; + clocks = <&sys_clk 41>, <&sys_clk 42>; + reset-names = "evea", "exiv", "adamv"; + resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>; + #sound-dai-cells = <1>; + + port@0 { + evea_line: endpoint { + remote-endpoint = <&i2s_line>; + }; + }; + + port@1 { + evea_hp: endpoint { + remote-endpoint = <&i2s_hp>; + }; + }; + }; + adamv@57920000 { compatible = "socionext,uniphier-ld20-adamv", "simple-mfd", "syscon"; @@ -513,6 +596,24 @@ }; }; + eth: ethernet@65000000 { + compatible = "socionext,uniphier-ld20-ave4"; + status = "disabled"; + reg = <0x65000000 0x8500>; + interrupts = <0 66 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ether_rgmii>; + clocks = <&sys_clk 6>; + resets = <&sys_rst 6>; + phy-mode = "rgmii"; + local-mac-address = [00 00 00 00 00 00]; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -528,3 +629,21 @@ }; #include "uniphier-pinctrl.dtsi" + +&pinctrl_aout1 { + drive-strength = <4>; /* default: 3.5mA */ + + ao1dacck { + pins = "AO1DACCK"; + drive-strength = <5>; /* 5mA */ + }; +}; + +&pinctrl_aoutiec1 { + drive-strength = <4>; /* default: 3.5mA */ + + ao1arc { + pins = "AO1ARC"; + drive-strength = <11>; /* 11mA */ + }; +}; diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts index 3c7108729827..e62d068776d5 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs3 Reference Board - * - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs3 Reference Board +// +// Copyright (C) 2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> /dts-v1/; #include "uniphier-pxs3.dtsi" diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi index 234fc58cc599..b537a3c0071f 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi @@ -1,11 +1,9 @@ -/* - * Device Tree Source for UniPhier PXs3 SoC - * - * Copyright (C) 2017 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) - */ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +// +// Device Tree Source for UniPhier PXs3 SoC +// +// Copyright (C) 2017 Socionext Inc. +// Author: Masahiro Yamada <yamada.masahiro@socionext.com> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> diff --git a/arch/arm64/boot/dts/sprd/sc2731.dtsi b/arch/arm64/boot/dts/sprd/sc2731.dtsi new file mode 100644 index 000000000000..4331006185bf --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc2731.dtsi @@ -0,0 +1,169 @@ +/* + * Spreadtrum SC2731 PMIC dts file + * + * Copyright (C) 2018, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +&adi_bus { + sc2731_pmic: pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@280 { + compatible = "sprd,sc27xx-rtc", "sprd,sc2731-rtc"; + reg = <0x280>; + interrupt-parent = <&sc2731_pmic>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + + regulators { + compatible = "sprd,sc27xx-regulator"; + + vddarm0: BUCK_CPU0 { + regulator-name = "vddarm0"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + vddarm1: BUCK_CPU1 { + regulator-name = "vddarm1"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1996875>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + + dcdcrf: BUCK_RF { + regulator-name = "dcdcrf"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2196875>; + regulator-ramp-delay = <25000>; + regulator-enable-ramp-delay = <100>; + regulator-always-on; + }; + + vddcama0: LDO_CAMA0 { + regulator-name = "vddcama0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + }; + + vddcama1: LDO_CAMA1 { + regulator-name = "vddcama1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcammot: LDO_CAMMOT { + regulator-name = "vddcammot"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddvldo: LDO_VLDO { + regulator-name = "vddvldo"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddemmccore: LDO_EMMCCORE { + regulator-name = "vddemmccore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + regulator-boot-on; + }; + + vddsdcore: LDO_SDCORE { + regulator-name = "vddsdcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddsdio: LDO_SDIO { + regulator-name = "vddsdio"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddwifipa: LDO_WIFIPA { + regulator-name = "vddwifipa"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddusb33: LDO_USB33 { + regulator-name = "vddusb33"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3750000>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamd0: LDO_CAMD0 { + regulator-name = "vddcamd0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamd1: LDO_CAMD1 { + regulator-name = "vddcamd1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcon: LDO_CON { + regulator-name = "vddcon"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddcamio: LDO_CAMIO { + regulator-name = "vddcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + }; + + vddsram: LDO_SRAM { + regulator-name = "vddsram"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1793750>; + regulator-enable-ramp-delay = <100>; + regulator-ramp-delay = <25000>; + regulator-always-on; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts index ae0b28ce6319..985ebb5d157e 100644 --- a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sc9860.dtsi" +#include "sc2731.dtsi" / { model = "Spreadtrum SP9860G 3GFHD Board"; @@ -20,6 +21,7 @@ serial1 = &uart1; /* UART console */ serial2 = &uart2; /* Reserved */ serial3 = &uart3; /* for GPS */ + spi0 = &adi_bus; }; memory{ diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi index 328009c4638c..66a881e6da92 100644 --- a/arch/arm64/boot/dts/sprd/whale2.dtsi +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi @@ -6,6 +6,8 @@ * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +#include <dt-bindings/clock/sprd,sc9860-clk.h> + / { interrupt-parent = <&gic>; #address-cells = <2>; @@ -104,6 +106,85 @@ status = "disabled"; }; }; + + ap-ahb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap_dma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x20100000 0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&apahb_gate CLK_DMA_EB>; + }; + }; + + aon { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@40050000 { + compatible = "sprd,sc9860-timer"; + reg = <0 0x40050000 0 0x20>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_32k>; + }; + + hwlock: hwspinlock@40500000 { + compatible = "sprd,hwspinlock-r3p0"; + reg = <0 0x40500000 0 0x1000>; + #hwlock-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate CLK_SPLK_EB>; + }; + + pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0 0x402a0000 0 0x10000>; + }; + + watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + timeout-sec = <12>; + clock-names = "enable"; + clocks = <&aon_gate CLK_APCPU_WDG_EB>; + }; + }; + + agcp { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + agcp_dma: dma-controller@41580000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x41580000 0 0x4000>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable", "ashb_eb"; + clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, + <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + }; + }; }; ext_32k: ext_32k { diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile index a2d67084a514..c2a0c00272e2 100644 --- a/arch/arm64/boot/dts/xilinx/Makefile +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -1 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1232-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1254-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1275-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm015-dc1.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm016-dc2.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm017-dc3.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm018-dc4.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zc1751-xm019-dc5.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu100-revC.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-revB.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi new file mode 100644 index 000000000000..9c09baca7dd7 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Clock specification for Xilinx ZynqMP + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/ { + clk100: clk100 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk125: clk125 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk200: clk200 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + clk250: clk250 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; + + clk300: clk300 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000000>; + }; + + clk600: clk600 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <600000000>; + }; + + dp_aclk: clock0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-accuracy = <100>; + }; + + dp_aud_clk: clock1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + clock-accuracy = <100>; + }; + + dpdma_clk: dpdma_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <533000000>; + }; + + drm_clock: drm_clock { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <262750000>; + clock-accuracy = <0x64>; + }; +}; + +&can0 { + clocks = <&clk100 &clk100>; +}; + +&can1 { + clocks = <&clk100 &clk100>; +}; + +&fpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&fpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan1 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan2 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan3 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan4 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan5 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan6 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan7 { + clocks = <&clk600>, <&clk100>; +}; + +&lpd_dma_chan8 { + clocks = <&clk600>, <&clk100>; +}; + +&gem0 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem1 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem2 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gem3 { + clocks = <&clk125>, <&clk125>, <&clk125>; +}; + +&gpio { + clocks = <&clk100>; +}; + +&i2c0 { + clocks = <&clk100>; +}; + +&i2c1 { + clocks = <&clk100>; +}; + +&sata { + clocks = <&clk250>; +}; + +&sdhci0 { + clocks = <&clk200 &clk200>; +}; + +&sdhci1 { + clocks = <&clk200 &clk200>; +}; + +&spi0 { + clocks = <&clk200 &clk200>; +}; + +&spi1 { + clocks = <&clk200 &clk200>; +}; + +&uart0 { + clocks = <&clk100 &clk100>; +}; + +&uart1 { + clocks = <&clk100 &clk100>; +}; + +&usb0 { + clocks = <&clk250>, <&clk250>; +}; + +&usb1 { + clocks = <&clk250>, <&clk250>; +}; + +&watchdog0 { + clocks = <&clk250>; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi index b87b8316f4ac..9f5eedbc2139 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * clock specification for Xilinx ZynqMP ep108 development board * diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts index bf552674a834..4b0684911626 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP ep108 development board * @@ -47,7 +48,7 @@ status = "okay"; phy-handle = <&phy0>; phy-mode = "rgmii-id"; - phy0: phy@0{ + phy0: phy@0 { reg = <0>; max-speed = <100>; }; @@ -78,10 +79,20 @@ &sata { status = "okay"; ceva,broken-gen2; + /* SATA Phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; }; &sdhci0 { status = "okay"; + bus-width = <8>; }; &sdhci1 { diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts new file mode 100644 index 000000000000..0f7b4cf6078e --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1232 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1232 RevA"; + compatible = "xlnx,zynqmp-zc1232-revA", "xlnx,zynqmp-zc1232", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts new file mode 100644 index 000000000000..9092828f92ec --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1254 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1254 RevA"; + compatible = "xlnx,zynqmp-zc1254-revA", "xlnx,zynqmp-zc1254", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts new file mode 100644 index 000000000000..4f404c580eec --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts @@ -0,0 +1,42 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZC1275 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Siva Durga Prasad Paladugu <sivadur@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP ZC1275 RevA"; + compatible = "xlnx,zynqmp-zc1275-revA", "xlnx,zynqmp-zc1275", "xlnx,zynqmp"; + + aliases { + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&dcc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts new file mode 100644 index 000000000000..9a3e39d1294f --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts @@ -0,0 +1,131 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm015-dc1 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm015-dc1 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@55 { + compatible = "atmel,24c64"; /* 24AA64 */ + reg = <0x55>; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* eMMC */ +&sdhci0 { + status = "okay"; + bus-width = <8>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts new file mode 100644 index 000000000000..11cc67184fa9 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm016-dc2 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm016-dc2 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + can0 = &can0; + can1 = &can1; + ethernet0 = &gem2; + i2c0 = &i2c0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + spi0 = &spi0; + spi1 = &spi1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem2 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@5 { + reg = <5>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; + num-cs = <1>; + + spi0_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf080", "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x100000>; + }; + }; +}; + +&spi1 { + status = "okay"; + num-cs = <1>; + + spi1_flash0: flash0@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <20000000>; + reg = <0>; + + partition@0 { + label = "data"; + reg = <0x0 0x84000>; + }; + }; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts new file mode 100644 index 000000000000..7a49deeae647 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts @@ -0,0 +1,150 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm017-dc3 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm017-dc3 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { /* VSC8211 */ + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +/* just eeprom here */ +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u26: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* IRQ not connected */ + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +/* eeprom24c02 and SE98A temp chip pca9306 */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA phy OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +&sdhci1 { /* emmc with some settings */ + status = "okay"; +}; + +/* main */ +&uart0 { + status = "okay"; +}; + +/* DB9 */ +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; + dr_mode = "host"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts new file mode 100644 index 000000000000..54c7b4f1d1e4 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts @@ -0,0 +1,178 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm018-dc4 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" + +/ { + model = "ZynqMP zc1751-xm018-dc4"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + ethernet1 = &gem1; + ethernet2 = &gem2; + ethernet3 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&can0 { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&lpd_dma_chan1 { + status = "okay"; +}; + +&lpd_dma_chan2 { + status = "okay"; +}; + +&lpd_dma_chan3 { + status = "okay"; +}; + +&lpd_dma_chan4 { + status = "okay"; +}; + +&lpd_dma_chan5 { + status = "okay"; +}; + +&lpd_dma_chan6 { + status = "okay"; +}; + +&lpd_dma_chan7 { + status = "okay"; +}; + +&lpd_dma_chan8 { + status = "okay"; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy0>; + ethernet_phy0: ethernet-phy@0 { /* Marvell 88e1512 */ + reg = <0>; + }; + ethernet_phy7: ethernet-phy@7 { /* Vitesse VSC8211 */ + reg = <7>; + }; + ethernet_phy3: ethernet-phy@3 { /* Realtek RTL8211DN */ + reg = <3>; + }; + ethernet_phy8: ethernet-phy@8 { /* Vitesse VSC8211 */ + reg = <8>; + }; +}; + +&gem1 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy7>; +}; + +&gem2 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy3>; +}; + +&gem3 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy8>; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts new file mode 100644 index 000000000000..b8b5ff13818d --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP zc1751-xm019-dc5 + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Siva Durga Prasad <siva.durga.paladugu@xilinx.com> + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP zc1751-xm019-dc5 RevA"; + compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem1; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem1 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&sdhci0 { + status = "okay"; + no-1-8-v; +}; + +&ttc0 { + status = "okay"; +}; + +&ttc1 { + status = "okay"; +}; + +&ttc2 { + status = "okay"; +}; + +&ttc3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts new file mode 100644 index 000000000000..3e862a9faf26 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU100 revC + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * Nathalie Chan King Choy + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU100 RevC"; + compatible = "xlnx,zynqmp-zcu100-revC", "xlnx,zynqmp-zcu100", "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c1; + rtc0 = &rtc; + serial0 = &uart1; + serial1 = &uart0; + serial2 = &dcc; + spi0 = &spi0; + spi1 = &spi1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw4 { + label = "sw4"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + ds2 { + label = "ds2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds3 { + label = "ds3"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; /* WLAN tx */ + default-state = "off"; + }; + + ds4 { + label = "ds4"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0rx"; /* WLAN rx */ + default-state = "off"; + }; + + ds5 { + label = "ds5"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + }; + + vbus_det { /* U5 USB5744 VBUS detection via MIO25 */ + label = "vbus_det"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + bt_power { + label = "bt_power"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + wmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "wmmcsdio_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + }; +}; + +&dcc { + status = "okay"; +}; + +&gpio { + status = "okay"; + gpio-line-names = "UART1_TX", "UART1_RX", "UART0_RX", "UART0_TX", "I2C1_SCL", + "I2C1_SDA", "SPI1_SCLK", "WLAN_EN", "BT_EN", "SPI1_CS", + "SPI1_MISO", "SPI1_MOSI", "I2C_MUX_RESET", "SD0_DAT0", "SD0_DAT1", + "SD0_DAT2", "SD0_DAT3", "PS_LED3", "PS_LED2", "PS_LED1", + "PS_LED0", "SD0_CMD", "SD0_CLK", "GPIO_PB", "SD0_DETECT", + "VBUS_DET", "POWER_INT", "DP_AUX", "DP_HPD", "DP_OE", + "DP_AUX_IN", "INA226_ALERT", "PS_FP_PWR_EN", "PL_PWR_EN", "POWER_KILL", + "", "GPIO-A", "GPIO-B", "SPI0_SCLK", "GPIO-C", + "GPIO-D", "SPI0_CS", "SPI0_MISO", "SPI_MOSI", "GPIO-E", + "GPIO-F", "SD1_D0", "SD1_D1", "SD1_D2", "SD1_D3", + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", + "USB_DATA7", "WLAN_IRQ", "PMIC_IRQ", /* MIO end and EMIO start */ + "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", + "", "", "", ""; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + i2c-mux@75 { /* u11 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2csw_0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + label = "LS-I2C0"; + }; + i2csw_1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + label = "LS-I2C1"; + }; + i2csw_2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + label = "HS-I2C2"; + }; + i2csw_3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + label = "HS-I2C3"; + }; + i2csw_4: i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; + + pmic: pmic@5e { /* Custom TI PMIC u33 */ + compatible = "ti,tps65086"; + reg = <0x5e>; + interrupt-parent = <&gpio>; + interrupts = <77 GPIO_ACTIVE_LOW>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + i2csw_5: i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* PS_PMBUS */ + ina226@40 { /* u35 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <10000>; + /* MIO31 is alert which should be routed to PMUFW */ + }; + }; + i2csw_6: i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* + * Not Connected + */ + }; + i2csw_7: i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* + * usb5744 (DNP) - U5 + * 100kHz - this is default freq for us + */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +/* SD0 only supports 3.3V, no level shifter */ +&sdhci0 { + status = "okay"; + no-1-8-v; + broken-cd; /* CD has to be enabled by default */ + disable-wp; +}; + +&sdhci1 { + status = "okay"; + bus-width = <0x4>; + non-removable; + disable-wp; + cap-power-off-card; + mmc-pwrseq = <&sdio_pwrseq>; + vqmmc-supply = <&wmmcsdio_fixed>; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wifi@2 { + compatible = "ti,wl1831"; + reg = <2>; + interrupt-parent = <&gpio>; + interrupts = <76 IRQ_TYPE_EDGE_RISING>; /* MIO76 WLAN_IRQ 1V8 */ + }; +}; + +&spi0 { /* Low Speed connector */ + status = "okay"; + label = "LS-SPI0"; +}; + +&spi1 { /* High Speed connector */ + status = "okay"; + label = "HS-SPI1"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; + +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb1 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts new file mode 100644 index 000000000000..6647e97edba3 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 Rev1.0 + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-revB.dts" + +/ { + model = "ZynqMP ZCU102 Rev1.0"; + compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&eeprom { + #address-cells = <1>; + #size-cells = <1>; + + board_sn: board-sn@0 { + reg = <0x0 0x14>; + }; + + eth_mac: eth-mac@20 { + reg = <0x20 0x6>; + }; + + board_name: board-name@d0 { + reg = <0xd0 0x6>; + }; + + board_revision: board-revision@e0 { + reg = <0xe0 0x3>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts new file mode 100644 index 000000000000..5b4ffe646a9b --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts @@ -0,0 +1,548 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevA + * + * (C) Copyright 2015 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU102 RevA"; + compatible = "xlnx,zynqmp-zcu102-revA", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@21 { + reg = <21>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - PS_GTR_LAN_SEL0 + * 1 - PS_GTR_LAN_SEL1 + * 2 - PS_GTR_LAN_SEL2 + * 3 - PS_GTR_LAN_SEL3 + * 4 - PCI_CLK_DIR_SEL + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7, 10 - 17 - not connected + */ + + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + output-low; /* PCIE = 0, DP = 1 */ + line-name = "sel0"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + output-high; /* PCIE = 0, DP = 1 */ + line-name = "sel1"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + output-high; /* PCIE = 0, USB0 = 1 */ + line-name = "sel2"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + output-high; /* PCIE = 0, SATA = 1 */ + line-name = "sel3"; + }; + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + max15303@20 { /* u8 */ + compatible = "maxim,max15303"; + status = "disabled"; /* unreachable */ + reg = <0x20>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + /* + * Chip has interrupt present connected to PL + * interrupt-parent = <&>; + * interrupts = <>; + */ + }; + }; + /* 5 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts new file mode 100644 index 000000000000..af4d86882a5c --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU102 RevB + * + * (C) Copyright 2016 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +#include "zynqmp-zcu102-revA.dts" + +/ { + model = "ZynqMP ZCU102 RevB"; + compatible = "xlnx,zynqmp-zcu102-revB", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; +}; + +&gem3 { + phy-handle = <&phyc>; + phyc: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; + /* Cleanup from RevA */ + /delete-node/ phy@21; +}; + +/* Fix collision with u61 */ +&i2c0 { + i2c-mux@75 { + i2c@2 { + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + /delete-node/ max15303@20; + }; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts new file mode 100644 index 000000000000..d4ad19a38c93 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU104 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU104 RevA"; + compatible = "xlnx,zynqmp-zcu104-revA", "xlnx,zynqmp-zcu104", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* Another connection to this bus via PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + clock_8t49n287: clock-generator@6c { /* 8T49N287 - u182 */ + reg = <0x6c>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u175 */ + reg = <0x43>; + }; + irps5401_4d: irps54012@4d { /* IRPS5401 - u180 */ + reg = <0x4d>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + tca6416_u97: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - IRPS5401_ALERT_B + * 1 - HDMI_8T49N241_INT_ALM + * 2 - MAX6643_OT_B + * 3 - MAX6643_FANFAIL_B + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 7 - FMC_LPC_PRSNT_M2C_B + * 4, 10 - 17 - not connected + */ + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + + /* 3, 6 not connected */ + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; + disable-wp; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts new file mode 100644 index 000000000000..668f7f26716a --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU106 + * + * (C) Copyright 2016, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU106 RevA"; + compatible = "xlnx,zynqmp-zcu106-revA", "xlnx,zynqmp-zcu106", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + status = "okay"; +}; + +&dcc { + status = "okay"; +}; + +/* fpd_dma clk 667MHz, lpd_dma 500MHz */ +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u97: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - SFP_SI5328_INT_ALM + * 1 - HDMI_SI5328_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMC_HPC0_PRSNT_M2C_B + * 11 - FMC_HPC1_PRSNT_M2C_B + * 2-4, 7, 12-17 - not connected + */ + }; + + tca6416_u61: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - VCCPSPLL_EN + * 1 - MGTRAVCC_EN + * 2 - MGTRAVTT_EN + * 3 - VCCPSDDRPLL_EN + * 4 - MIO26_PMU_INPUT_LS + * 5 - PL_PMBUS_ALERT + * 6 - PS_PMBUS_ALERT + * 7 - MAXIM_PMBUS_ALERT + * 10 - PL_DDR4_VTERM_EN + * 11 - PL_DDR4_VPP_2V5_EN + * 12 - PS_DIMM_VDDQ_TO_PSVCCO_ON + * 13 - PS_DIMM_SUSPEND_EN + * 14 - PS_DDR4_VTERM_EN + * 15 - PS_DDR4_VPP_2V5_EN + * 16 - 17 - not connected + */ + }; + + i2c-mux@75 { /* u60 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + ina226@40 { /* u76 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + ina226@41 { /* u77 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u85 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u93 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u88 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u15 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u92 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* PL_PMBUS */ + ina226@40 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u80 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@44 { /* u16 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + ina226@47 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* MAXIM_PMBUS - 00 */ + max15301@a { /* u46 */ + compatible = "maxim,max15301"; + reg = <0xa>; + }; + max15303@b { /* u4 */ + compatible = "maxim,max15303"; + reg = <0xb>; + }; + max15303@10 { /* u13 */ + compatible = "maxim,max15303"; + reg = <0x10>; + }; + max15301@13 { /* u47 */ + compatible = "maxim,max15301"; + reg = <0x13>; + }; + max15303@14 { /* u7 */ + compatible = "maxim,max15303"; + reg = <0x14>; + }; + max15303@15 { /* u6 */ + compatible = "maxim,max15303"; + reg = <0x15>; + }; + max15303@16 { /* u10 */ + compatible = "maxim,max15303"; + reg = <0x16>; + }; + max15303@17 { /* u9 */ + compatible = "maxim,max15303"; + reg = <0x17>; + }; + max15301@18 { /* u63 */ + compatible = "maxim,max15301"; + reg = <0x18>; + }; + max15303@1a { /* u49 */ + compatible = "maxim,max15303"; + reg = <0x1a>; + }; + max15303@1b { /* u8 */ + compatible = "maxim,max15303"; + reg = <0x1b>; + }; + max15303@1d { /* u18 */ + compatible = "maxim,max15303"; + reg = <0x1d>; + }; + + max20751@72 { /* u95 */ + compatible = "maxim,max20751"; + reg = <0x72>; + }; + max20751@73 { /* u96 */ + compatible = "maxim,max20751"; + reg = <0x73>; + }; + }; + /* Bus 3 is not connected */ + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + /* PL i2c via PCA9306 - u45 */ + i2c-mux@74 { /* u34 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u23 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u69 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u42 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u56 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; /* copy from zc702 */ + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 {/* SI5328 - u20 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; /* FAN controller */ + temp@4c {/* lm96163 - u128 */ + compatible = "national,lm96163"; + reg = <0x4c>; + }; + }; + /* 6 - 7 unconnected */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u135 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* HPC0_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* HPC1_IIC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SEP 3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SEP 2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SEP 1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SEP 0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; + +&watchdog0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts new file mode 100644 index 000000000000..9a9dd6a0142b --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Xilinx ZynqMP ZCU111 + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ + +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "ZynqMP ZCU111 RevA"; + compatible = "xlnx,zynqmp-zcu111-revA", "xlnx,zynqmp-zcu111", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem3; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>; + /* Another 4GB connected to PL */ + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + sw19 { + label = "sw19"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_DOWN>; + gpio-key,wakeup; + autorepeat; + }; + }; + + leds { + compatible = "gpio-leds"; + heartbeat_led { + label = "heartbeat"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&dcc { + status = "okay"; +}; + +&fpd_dma_chan1 { + status = "okay"; +}; + +&fpd_dma_chan2 { + status = "okay"; +}; + +&fpd_dma_chan3 { + status = "okay"; +}; + +&fpd_dma_chan4 { + status = "okay"; +}; + +&fpd_dma_chan5 { + status = "okay"; +}; + +&fpd_dma_chan6 { + status = "okay"; +}; + +&fpd_dma_chan7 { + status = "okay"; +}; + +&fpd_dma_chan8 { + status = "okay"; +}; + +&gem3 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@c { + reg = <0xc>; + ti,rx-internal-delay = <0x8>; + ti,tx-internal-delay = <0xa>; + ti,fifo-depth = <0x1>; + }; +}; + +&gpio { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + tca6416_u22: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; /* interrupt not connected */ + #gpio-cells = <2>; + /* + * IRQ not connected + * Lines: + * 0 - MAX6643_OT_B + * 1 - MAX6643_FANFAIL_B + * 2 - MIO26_PMU_INPUT_LS + * 4 - SFP_SI5382_INT_ALM + * 5 - IIC_MUX_RESET_B + * 6 - GEM3_EXP_RESET_B + * 10 - FMCP_HSPC_PRSNT_M2C_B + * 11 - CLK_SPI_MUX_SEL0 + * 12 - CLK_SPI_MUX_SEL1 + * 16 - IRPS5401_ALERT_B + * 17 - INA226_PMBUS_ALERT + * 3, 7, 13-15 - not connected + */ + }; + + i2c-mux@75 { /* u23 */ + compatible = "nxp,pca9544"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* PS_PMBUS */ + /* PMBUS_ALERT done via pca9544 */ + ina226@40 { /* u67 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + ina226@41 { /* u59 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + ina226@42 { /* u61 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u60 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + ina226@45 { /* u64 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + ina226@46 { /* u69 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <2000>; + }; + ina226@47 { /* u66 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + ina226@48 { /* u65 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + ina226@49 { /* u63 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + ina226@4a { /* u3 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + ina226@4b { /* u71 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <5000>; + }; + ina226@4c { /* u77 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <5000>; + }; + ina226@4d { /* u73 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + ina226@4e { /* u79 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <5000>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + irps5401_43: irps54012@43 { /* IRPS5401 - u53 check these */ + reg = <0x43>; + }; + irps5401_44: irps54012@44 { /* IRPS5401 - u55 */ + reg = <0x44>; + }; + irps5401_45: irps54012@45 { /* IRPS5401 - u57 */ + reg = <0x45>; + }; + /* u68 IR38064 +0 */ + /* u70 IR38060 +1 */ + /* u74 IR38060 +2 */ + /* u75 IR38060 +6 */ + /* J19 header too */ + + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* SYSMON */ + }; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + i2c-mux@74 { /* u26 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* + * IIC_EEPROM 1kB memory which uses 256B blocks + * where every block has different address. + * 0 - 256B address 0x54 + * 256B - 512B address 0x55 + * 512B - 768B address 0x56 + * 768B - 1024B address 0x57 + */ + eeprom: eeprom@54 { /* u88 */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + si5341: clock-generator@36 { /* SI5341 - u46 */ + reg = <0x36>; + }; + + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_1: clock-generator@5d { /* USER SI570 - u47 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <300000000>; + clock-frequency = <300000000>; + }; + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_2: clock-generator@5d { /* USER MGT SI570 - u49 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; + temperature-stability = <50>; + factory-fout = <156250000>; + clock-frequency = <148500000>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si5328: clock-generator@69 { /* SI5328 - u48 */ + reg = <0x69>; + }; + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + sc18is603@2f { /* sc18is602 - u93 */ + compatible = "nxp,sc18is603"; + reg = <0x2f>; + /* 4 gpios for CS not handled by driver */ + /* + * USB2ANY cable or + * LMK04208 - u90 or + * LMX2594 - u102 or + * LMX2594 - u103 or + * LMX2594 - u104 + */ + }; + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* FMC connector */ + }; + /* 7 NC */ + }; + + i2c-mux@75 { + compatible = "nxp,pca9548"; /* u27 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* FMCP_HSPC_IIC */ + }; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* NC */ + }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* SYSMON */ + }; + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* DDR4 SODIMM */ + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* SFP3 */ + }; + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + /* SFP2 */ + }; + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + /* SFP1 */ + }; + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* SFP0 */ + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&sata { + status = "okay"; + /* SATA OOB timing settings */ + ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>; + ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>; + ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>; + ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>; +}; + +/* SD1 with level shifter */ +&sdhci1 { + status = "okay"; + no-1-8-v; +}; + +&uart0 { + status = "okay"; +}; + +/* ULPI SMSC USB3320 */ +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index 7665fbddff28..a091e6f03014 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * dts file for Xilinx ZynqMP * @@ -355,7 +356,7 @@ }; gem0: ethernet@ff0b0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 57 4>, <0 57 4>; @@ -366,7 +367,7 @@ }; gem1: ethernet@ff0c0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 59 4>, <0 59 4>; @@ -377,7 +378,7 @@ }; gem2: ethernet@ff0d0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 61 4>, <0 61 4>; @@ -388,7 +389,7 @@ }; gem3: ethernet@ff0e0000 { - compatible = "cdns,gem"; + compatible = "cdns,zynqmp-gem", "cdns,gem"; status = "disabled"; interrupt-parent = <&gic>; interrupts = <0 63 4>, <0 63 4>; @@ -439,10 +440,10 @@ device_type = "pci"; interrupt-parent = <&gic>; interrupts = <0 118 4>, - <0 117 4>, - <0 116 4>, - <0 115 4>, /* MSI_1 [63...32] */ - <0 114 4>; /* MSI_0 [31...0] */ + <0 117 4>, + <0 116 4>, + <0 115 4>, /* MSI_1 [63...32] */ + <0 114 4>; /* MSI_0 [31...0] */ interrupt-names = "misc", "dummy", "intx", "msi1", "msi0"; msi-parent = <&pcie>; |