diff options
Diffstat (limited to 'arch/arm64/boot')
19 files changed, 59 insertions, 34 deletions
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index e6b059378dc0..67dac595dc72 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -309,8 +309,7 @@ interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; @@ -322,8 +321,7 @@ interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; reg-io-width = <4>; - num-chipselect = <4>; - bus-num = <0>; + num-cs = <4>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts index 4b3331fbfe39..dff9b15eb3c0 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts +++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts @@ -66,9 +66,22 @@ ðmac { status = "okay"; - phy-mode = "rgmii"; pinctrl-0 = <ð_rgmii_y_pins>; pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + eee-broken-1000t; + }; + }; }; &uart_A { diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index fee87737a201..67d7115e4eff 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -132,7 +132,7 @@ sd_emmc_b: sd@5000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x5000 0x0 0x2000>; + reg = <0x0 0x5000 0x0 0x800>; interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_B>, @@ -144,7 +144,7 @@ sd_emmc_c: mmc@7000 { compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0x7000 0x0 0x2000>; + reg = <0x0 0x7000 0x0 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; status = "disabled"; clocks = <&clkc CLKID_SD_EMMC_C>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 3c31e21cbed7..b8dc4dbb391b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -35,6 +35,12 @@ no-map; }; + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; @@ -457,21 +463,21 @@ sd_emmc_a: mmc@70000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x70000 0x0 0x2000>; + reg = <0x0 0x70000 0x0 0x800>; interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; sd_emmc_b: mmc@72000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x72000 0x0 0x2000>; + reg = <0x0 0x72000 0x0 0x800>; interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; sd_emmc_c: mmc@74000 { compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; - reg = <0x0 0x74000 0x0 0x2000>; + reg = <0x0 0x74000 0x0 0x800>; interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi index eb327664a4d8..6aaafff674f9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -6,7 +6,7 @@ &apb { mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; reg = <0x0 0xc0000 0x0 0x40000>; interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index 3e3eb31748a3..f63bceb88caa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -234,9 +234,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi index 0cfd701809de..a1b31013ab6e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -189,3 +189,10 @@ &usb0 { status = "okay"; }; + +&usb2_phy0 { + /* + * HDMI_5V is also used as supply for the USB VBUS. + */ + phy-supply = <&hdmi_5v>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 27538eea547b..c87a80e9bcc6 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -13,14 +13,6 @@ / { compatible = "amlogic,meson-gxl"; - reserved-memory { - /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved_alt: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; - }; - }; - soc { usb0: usb@c9000000 { status = "disabled"; diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 4a2a6af8e752..4057197048dc 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -118,7 +118,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <0>; @@ -149,7 +149,7 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_NONE>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; linux,pci-domain = <4>; @@ -566,7 +566,7 @@ reg = <0x66080000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -594,7 +594,7 @@ reg = <0x660b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts index eb6f08cdbd79..77efa28c4dd5 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts @@ -43,6 +43,10 @@ enet-phy-lane-swap; }; +&sdio0 { + mmc-ddr-1_8v; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts index 5084b037320f..55ba495ef56e 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts +++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts @@ -42,3 +42,7 @@ &gphy0 { enet-phy-lane-swap; }; + +&sdio0 { + mmc-ddr-1_8v; +}; diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 99aaff0b6d72..b203152ad67c 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -409,7 +409,7 @@ reg = <0x000b0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; @@ -453,7 +453,7 @@ reg = <0x000e0000 0x100>; #address-cells = <1>; #size-cells = <0>; - interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <100000>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts index c6999624ed8a..68c5a6c819ae 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -585,6 +585,8 @@ vmmc-supply = <&wlan_en>; ti,non-removable; non-removable; + cap-power-off-card; + keep-power-in-suspend; #address-cells = <0x1>; #size-cells = <0x0>; status = "ok"; diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index edb4ee0b8896..7f12624f6c8e 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -322,6 +322,8 @@ dwmmc_2: dwmmc2@f723f000 { bus-width = <0x4>; non-removable; + cap-power-off-card; + keep-power-in-suspend; vmmc-supply = <®_vdd_3v3>; mmc-pwrseq = <&wl1835_pwrseq>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi index 7dabe25f6774..1c6ff8197a88 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110.dtsi @@ -149,7 +149,7 @@ CP110_LABEL(icu): interrupt-controller@1e0000 { compatible = "marvell,cp110-icu"; - reg = <0x1e0000 0x10>; + reg = <0x1e0000 0x440>; #interrupt-cells = <3>; interrupt-controller; msi-parent = <&gicp>; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 0f829db33efe..4d5ef01f43a3 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -75,7 +75,7 @@ serial@75b1000 { label = "LS-UART0"; - status = "okay"; + status = "disabled"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&blsp2_uart2_4pins_default>; pinctrl-1 = <&blsp2_uart2_4pins_sleep>; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 650f356f69ca..c2625d15a8c0 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -1191,14 +1191,14 @@ port@0 { reg = <0>; - etf_out: endpoint { + etf_in: endpoint { slave-mode; remote-endpoint = <&funnel0_out>; }; }; port@1 { reg = <0>; - etf_in: endpoint { + etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts index 9b4dc41703e3..ae3b5adf32df 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD11"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts index fe6608ea3277..7919233c9ce2 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts @@ -54,7 +54,7 @@ sound { compatible = "audio-graph-card"; label = "UniPhier LD20"; - widgets = "Headphone", "Headphone Jack"; + widgets = "Headphone", "Headphones"; dais = <&i2s_port2 &i2s_port3 &i2s_port4 |