diff options
Diffstat (limited to 'arch/arm64/boot/dts/rockchip')
51 files changed, 4136 insertions, 767 deletions
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 8c15593c0ca4..0a76a2ebb5f6 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -3,11 +3,15 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb @@ -62,13 +66,19 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts index 07008d84434c..c1bbd555f5f5 100644 --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts @@ -30,31 +30,31 @@ keyup-threshold-microvolt = <1800000>; poll-interval = <100>; - esc-key { + button-esc { label = "esc"; linux,code = <KEY_ESC>; press-threshold-microvolt = <1310000>; }; - home-key { + button-home { label = "home"; linux,code = <KEY_HOME>; press-threshold-microvolt = <624000>; }; - menu-key { + button-menu { label = "menu"; linux,code = <KEY_MENU>; press-threshold-microvolt = <987000>; }; - vol-down-key { + button-down { label = "volume down"; linux,code = <KEY_VOLUMEDOWN>; press-threshold-microvolt = <300000>; }; - vol-up-key { + button-up { label = "volume up"; linux,code = <KEY_VOLUMEUP>; press-threshold-microvolt = <17000>; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts new file mode 100644 index 000000000000..08a3ad3e7ae9 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou.dts @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "px30-ringneck.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit"; + compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; + + aliases { + mmc2 = &sdmmc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&haikou_keys_pin>; + pinctrl-names = "default"; + + button-batlow-n { + label = "BATLOW#"; + linux,code = <KEY_BATTERY>; + gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; + }; + + button-slp-btn-n { + label = "SLP_BTN#"; + linux,code = <KEY_SLEEP>; + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + }; + + button-wake-n { + label = "WAKE#"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + + switch-lid-btn-n { + label = "LID_BTN#"; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; + + sd_card_led: led-1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + function = LED_FUNCTION_SD; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + i2s0-sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Haikou,I2S-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + clocks = <&sgtl5000_clk>; + sound-dai = <&sgtl5000>; + }; + + simple-audio-card,cpu { + bitclock-master; + frame-master; + sound-dai = <&i2s0_8ch>; + }; + }; + + sgtl5000_clk: sgtl5000-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_baseboard: vcc3v3-baseboard-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_baseboard: vcc5v0-baseboard-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_baseboard"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vdda_codec: vdda-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "vdda_codec"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_baseboard>; + }; + + vddd_codec: vddd-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "vddd_codec"; + regulator-boot-on; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <1600000>; + vin-supply = <&vcc5v0_baseboard>; + }; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&sgtl5000_clk>; + #sound-dai-cells = <0>; + VDDA-supply = <&vdda_codec>; + VDDIO-supply = <&vcc3v3_baseboard>; + VDDD-supply = <&vddd_codec>; + }; +}; + +&i2c3 { + eeprom@50 { + reg = <0x50>; + compatible = "atmel,24c01"; + pagesize = <8>; + size = <128>; + vcc-supply = <&vcc3v3_baseboard>; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&pinctrl { + haikou { + haikou_keys_pin: haikou-keys-pin { + rockchip,pins = + /* WAKE# */ + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + /* SLP_BTN# */ + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + /* LID_BTN */ + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + /* BATLOW# */ + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + /* BIOS_DISABLE# */ + <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sd_card_led_pin: sd-card-led-pin { + rockchip,pins = + <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&sdmmc { + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <&vcc3v3_baseboard>; + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart5 { + pinctrl-0 = <&uart5_xfer>; + status = "okay"; +}; + +&usb20_otg { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi new file mode 100644 index 000000000000..12397755830b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include "px30.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + aliases { + mmc0 = &emmc; + mmc1 = &sdio; + rtc0 = &rtc_twi; + rtc1 = &rk809; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&module_led_pin>; + status = "okay"; + + module_led: led-0 { + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + linux,default-trigger = "heartbeat"; + color = <LED_COLOR_ID_AMBER>; + }; + }; + + vcc5v0_sys: vccsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + supports-emmc; + mmc-pwrseq = <&emmc_pwrseq>; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_emmc>; + + status = "okay"; +}; + +/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ +&gmac { + snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 50000 50000>; + phy-supply = <&vcc_3v3>; + clock_in_out = "output"; +}; + +&gpio2 { + /* + * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module + * eMMC powered-down initially (in fact it keeps the reset signal + * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after + * the SPL has been booted from SD Card. + */ + bios-disable-override-hog { + gpios = <RK_PB5 GPIO_ACTIVE_LOW>; + output-high; + line-name = "bios_disable_override"; + gpio-hog; + }; + + /* + * The BIOS_DISABLE hog is a feedback pin for the actual status of the + * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually + * represents the state of a switch on the baseboard. + */ + bios-disable-n-hog { + gpios = <RK_PC2 GPIO_ACTIVE_LOW>; + line-name = "bios_disable"; + input; + gpio-hog; + }; +}; + +&gpu { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&pmic_int>; + pinctrl-names = "default"; + #clock-cells = <0>; + clock-output-names = "xin32k"; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc_3v3>; + vcc6-supply = <&vcc_3v3>; + vcc7-supply = <&vcc_3v3>; + vcc9-supply = <&vcc5v0_sys>; + + regulators { + vdd_log: DCDC_REG1 { + regulator-name = "vdd_log"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v0_1v8: vcc_emmc: DCDC_REG4 { + regulator-name = "vcc_3v0_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_3v3: DCDC_REG5 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v0: LDO_REG3 { + regulator-name = "vcc_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vcc_lcd"; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_1v8_lcd: LDO_REG8 { + regulator-name = "vcc_1v8_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG9 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + /* SE05x is limited to Fast Mode */ + clock-frequency = <400000>; + + fan: fan@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + #cooling-cells = <2>; + }; + + rtc_twi: rtc@6f { + compatible = "isil,isl1208"; + reg = <0x6f>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2s0_8ch { + rockchip,trcm-sync-tx-only; + + pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx + &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_emmc>; + vccio-oscgpi-supply = <&vcc_3v3>; + + status = "okay"; +}; + +&pinctrl { + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + module_led_pin: module-led-pin { + rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = + <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +/* Mule UCAN */ +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts index 9fe9b0d11003..184b84fdde07 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-evb.dts @@ -23,7 +23,7 @@ poll-interval = <100>; keyup-threshold-microvolt = <1800000>; - func-key { + button-func { linux,code = <KEY_FN>; label = "function"; press-threshold-microvolt = <18000>; @@ -37,31 +37,31 @@ poll-interval = <100>; keyup-threshold-microvolt = <1800000>; - esc-key { + button-esc { linux,code = <KEY_MICMUTE>; label = "micmute"; press-threshold-microvolt = <1130000>; }; - home-key { + button-home { linux,code = <KEY_MODE>; label = "mode"; press-threshold-microvolt = <901000>; }; - menu-key { + button-menu { linux,code = <KEY_PLAY>; label = "play"; press-threshold-microvolt = <624000>; }; - vol-down-key { + button-down { linux,code = <KEY_VOLUMEDOWN>; label = "volume down"; press-threshold-microvolt = <300000>; }; - vol-up-key { + button-up { linux,code = <KEY_VOLUMEUP>; label = "volume up"; press-threshold-microvolt = <18000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts index ea6820902ede..7ea48167747c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts @@ -19,7 +19,7 @@ stdout-path = "serial2:1500000n8"; }; - ir_rx { + ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi index 2dfa67f1cd67..dd228a256a32 100644 --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi @@ -96,6 +96,7 @@ l2: l2-cache { compatible = "cache"; + cache-level = <2>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts index 43c928ac98f0..1deef53a4c94 100644 --- a/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts @@ -25,7 +25,7 @@ keyup-threshold-microvolt = <1800000>; poll-interval = <100>; - recovery { + button-recovery { label = "recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <17000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts new file mode 100644 index 000000000000..61b31688b469 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include "rk3326-odroid-go.dtsi" + +/ { + model = "Anbernic RG351M"; + compatible = "anbernic,rg351m", "rockchip,rk3326"; + + vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm0 0 1000000 0>; + pwm-names = "enable"; + }; +}; + +/delete-node/ &builtin_gamepad; +/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */ + +&internal_display { + compatible = "elida,kd35t133"; +}; + +&pwm0 { + status = "okay"; +}; + +/delete-node/ &rk817_charger; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi new file mode 100644 index 000000000000..fbc6bfbaa5c1 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go.dtsi @@ -0,0 +1,600 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + aliases { + mmc0 = &sdmmc; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + builtin_gamepad: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&btn_pins>; + + button-sw1 { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + button-sw2 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + button-sw3 { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + button-sw4 { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + button-sw5 { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "BTN-A"; + linux,code = <BTN_EAST>; + }; + button-sw6 { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "BTN-B"; + linux,code = <BTN_SOUTH>; + }; + button-sw7 { + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + label = "BTN-Y"; + linux,code = <BTN_WEST>; + }; + button-sw8 { + gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; + label = "BTN-X"; + linux,code = <BTN_NORTH>; + }; + btn_f1: button-sw9 { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "F1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + }; + btn_f2: button-sw10 { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "F2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + }; + btn_f3: button-sw11 { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + label = "F3"; + linux,code = <BTN_TRIGGER_HAPPY3>; + }; + btn_f4: button-sw12 { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; + label = "F4"; + linux,code = <BTN_TRIGGER_HAPPY4>; + }; + btn_f5: button-sw13 { + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; + label = "F5"; + linux,code = <BTN_TRIGGER_HAPPY5>; + }; + btn_f6: button-sw14 { + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; + label = "F6"; + linux,code = <BTN_TRIGGER_HAPPY6>; + }; + button-sw15 { + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + label = "TOP-LEFT"; + linux,code = <BTN_TL>; + }; + button-sw16 { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; + label = "TOP-RIGHT"; + linux,code = <BTN_TR>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&blue_led_pin>; + + blue_led: led-0 { + label = "blue:heartbeat"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + rk817-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "Analog"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_2ch>; + }; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vcc_host: vcc_host { + compatible = "regulator-fixed"; + regulator-name = "vcc_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + vin-supply = <&usb_midu>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, + <&cru PLL_CPLL>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>, + <17000000>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + internal_display: panel@0 { + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + rotation = <270>; + vdd-supply = <&vcc_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <16>; + i2c-scl-rising-time-ns = <280>; + status = "okay"; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + clock-output-names = "rk808-clkout1", "xin32k"; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S1_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; + wakeup-source; + #clock-cells = <1>; + #sound-dai-cells = <0>; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + vcc8-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + LDO_REG9 { + /* unused */ + }; + + usb_midu: BOOST { + regulator-name = "usb_midu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5400000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + rk817_charger: charger { + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + + rk817_codec: codec { + rockchip,mic-in-differential; + }; + }; +}; + +/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ +&i2c1 { + clock-frequency = <400000>; + status = "okay"; +}; + +/* I2S 1 Channel Used */ +&i2s1_2ch { + status = "okay"; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + cap-sd-highspeed; + card-detect-delay = <200>; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + }; +}; + +&tsadc { + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "disabled"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&pinctrl { + btns { + btn_pins: btn-pins { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headphone { + hp_det: hp-det { + rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + leds { + blue_led_pin: blue-led-pin { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dc_det: dc-det { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts new file mode 100644 index 000000000000..139c898e590e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2-v11.dts @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include "rk3326-odroid-go.dtsi" + +/ { + model = "ODROID-GO Advance Black Edition"; + compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326"; + + aliases { + mmc1 = &sdio; + }; + + analog_sticks: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&saradc 1>, + <&saradc 2>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <172 772>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <278 815>; + linux,code = <ABS_Y>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4100000>; + voltage-min-design-microvolt = <3500000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, + <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, + <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, + <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, + <3574170 0>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pins>; + reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + }; +}; + +&builtin_gamepad { + button-sw20 { + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + label = "TOP-LEFT 2"; + linux,code = <BTN_TL2>; + }; + button-sw21 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TOP-RIGHT 2"; + linux,code = <BTN_TR2>; + }; +}; + +&internal_display { + compatible = "elida,kd35t133"; +}; + +&rk817 { + regulators { + vcc_wifi: LDO_REG9 { + regulator-name = "vcc_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + }; +}; + +&rk817_charger { + monitored-battery = <&battery>; +}; + +&sdio { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + vmmc-supply = <&vcc_wifi>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + esp8089: wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + }; +}; + +&pinctrl { + btns { + btn_pins: btn-pins { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_pwrseq_pins: wifi-pwrseq-pins { + rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB6 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts index 72899a714310..4702183b673c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -2,30 +2,21 @@ /* * Copyright (c) 2019 Hardkernel Co., Ltd * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> */ /dts-v1/; -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/rockchip.h> -#include "rk3326.dtsi" +#include "rk3326-odroid-go.dtsi" / { model = "ODROID-GO Advance"; compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; - aliases { - mmc0 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - adc-joystick { + analog_sticks: adc-joystick { compatible = "adc-joystick"; io-channels = <&saradc 1>, <&saradc 2>; + poll-interval = <60>; #address-cells = <1>; #size-cells = <0>; @@ -46,12 +37,6 @@ }; }; - backlight: backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_bl>; - pwms = <&pwm1 0 25000 0>; - }; - battery: battery { compatible = "simple-battery"; charge-full-design-microamp-hours = <3000000>; @@ -63,606 +48,19 @@ voltage-min-design-microvolt = <3500000>; ocv-capacity-celsius = <20>; - ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, <3574170 0>; }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&btn_pins>; - - /* - * *** ODROIDGO2-Advance Switch layout *** - * |------------------------------------------------| - * | sw15 sw16 | - * |------------------------------------------------| - * | sw1 |-------------------| sw8 | - * | sw3 sw4 | | sw7 sw5 | - * | sw2 | LCD Display | sw6 | - * | | | | - * | |-------------------| | - * | sw9 sw10 sw11 sw12 sw13 sw14 | - * |------------------------------------------------| - */ - - button-sw1 { - gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; - label = "DPAD-UP"; - linux,code = <BTN_DPAD_UP>; - }; - button-sw2 { - gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; - label = "DPAD-DOWN"; - linux,code = <BTN_DPAD_DOWN>; - }; - button-sw3 { - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - label = "DPAD-LEFT"; - linux,code = <BTN_DPAD_LEFT>; - }; - button-sw4 { - gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; - label = "DPAD-RIGHT"; - linux,code = <BTN_DPAD_RIGHT>; - }; - button-sw5 { - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; - label = "BTN-A"; - linux,code = <BTN_EAST>; - }; - button-sw6 { - gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; - label = "BTN-B"; - linux,code = <BTN_SOUTH>; - }; - button-sw7 { - gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; - label = "BTN-Y"; - linux,code = <BTN_WEST>; - }; - button-sw8 { - gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; - label = "BTN-X"; - linux,code = <BTN_NORTH>; - }; - button-sw9 { - gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; - label = "F1"; - linux,code = <BTN_TRIGGER_HAPPY1>; - }; - button-sw10 { - gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; - label = "F2"; - linux,code = <BTN_TRIGGER_HAPPY2>; - }; - button-sw11 { - gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; - label = "F3"; - linux,code = <BTN_TRIGGER_HAPPY3>; - }; - button-sw12 { - gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; - label = "F4"; - linux,code = <BTN_TRIGGER_HAPPY4>; - }; - button-sw13 { - gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; - label = "F5"; - linux,code = <BTN_TRIGGER_HAPPY5>; - }; - button-sw14 { - gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; - label = "F6"; - linux,code = <BTN_TRIGGER_HAPPY6>; - }; - button-sw15 { - gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; - label = "TOP-LEFT"; - linux,code = <BTN_TL>; - }; - button-sw16 { - gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; - label = "TOP-RIGHT"; - linux,code = <BTN_TR>; - }; - }; - - leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - - blue_led: led-0 { - label = "blue:heartbeat"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - rk817-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Analog"; - simple-audio-card,format = "i2s"; - simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Speaker"; - simple-audio-card,routing = - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker", "SPKO"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_2ch>; - }; - }; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v8_sys"; - regulator-always-on; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - }; - - vcc_host: vcc_host { - compatible = "regulator-fixed"; - regulator-name = "vcc_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - vin-supply = <&usb_midu>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&cru { - assigned-clocks = <&cru PLL_NPLL>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, - <&cru PLL_CPLL>; - - assigned-clock-rates = <1188000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>, - <17000000>; }; -&display_subsystem { - status = "okay"; +&internal_display { + compatible = "elida,kd35t133"; }; -&dsi { - status = "okay"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "elida,kd35t133"; - reg = <0>; - backlight = <&backlight>; - iovcc-supply = <&vcc_lcd>; - reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - rotation = <270>; - vdd-supply = <&vcc_lcd>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&dsi_dphy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_logic>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <16>; - i2c-scl-rising-time-ns = <280>; - status = "okay"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - vcc8-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - usb_midu: BOOST { - regulator-name = "usb_midu"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5400000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - rk817_charger: charger { - monitored-battery = <&battery>; - rockchip,resistor-sense-micro-ohms = <10000>; - rockchip,sleep-enter-current-microamp = <300000>; - rockchip,sleep-filter-current-microamp = <100000>; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; -}; - -/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ -&i2c1 { - clock-frequency = <400000>; - status = "okay"; -}; - -/* I2S 1 Channel Used */ -&i2s1_2ch { - status = "okay"; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - status = "okay"; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - cap-sd-highspeed; - card-detect-delay = <200>; - cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <2>; - spi-tx-bus-width = <1>; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "disabled"; - }; -}; - -&usb20_otg { - status = "okay"; -}; - -/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2m1_xfer>; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&pinctrl { - btns { - btn_pins: btn-pins { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dc_det: dc-det { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pmic_int: pmic-int { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; - }; - }; +&rk817_charger { + monitored-battery = <&battery>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts new file mode 100644 index 000000000000..842efbaf1a6a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com> + */ + +/dts-v1/; +#include "rk3326-odroid-go.dtsi" + +/ { + model = "ODROID-GO Super"; + compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326"; + + joystick_mux_controller: mux-controller { + compatible = "gpio-mux"; + pinctrl = <&mux_en_pins>; + #mux-control-cells = <0>; + + mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>, + <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + }; + + joystick_mux: adc-mux { + compatible = "io-channel-mux"; + io-channels = <&saradc 1>; + io-channel-names = "parent"; + #io-channel-cells = <1>; + + mux-controls = <&joystick_mux_controller>; + channels = "0", "1", "2", "3"; + }; + + analog_sticks: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&joystick_mux 0>, + <&joystick_mux 1>, + <&joystick_mux 2>, + <&joystick_mux 3>; + poll-interval = <60>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <180 800>; + linux,code = <ABS_X>; + }; + + axis@1 { + reg = <1>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <180 800>; + linux,code = <ABS_RX>; + }; + + axis@2 { + reg = <2>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <180 800>; + linux,code = <ABS_Y>; + }; + + axis@3 { + reg = <3>; + abs-flat = <10>; + abs-fuzz = <10>; + abs-range = <180 800>; + linux,code = <ABS_RY>; + }; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <4000000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <180000>; + voltage-max-design-microvolt = <4100000>; + voltage-min-design-microvolt = <3500000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>, + <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>, + <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>, + <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>, + <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>, + <3574170 0>; + }; + + gpio-keys-vol { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&btn_pins_vol>; + pinctrl-names = "default"; + + button-vol-down { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "VOLUMEDOWN"; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-volume-up { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "VOLUMEUP"; + linux,code = <KEY_VOLUMEUP>; + }; + }; +}; + +/* f1 and f2 conflict with volume buttons */ +/delete-node/ &btn_f1; +/delete-node/ &btn_f2; + +&builtin_gamepad { + button-sw19 { + gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; + label = "SELECT"; + linux,code = <BTN_SELECT>; + }; + /* note that TR2 and TL2 are swapped */ + button-sw20 { + gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + label = "TOP-RIGHT 2"; + linux,code = <BTN_TR2>; + }; + button-sw21 { + gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>; + label = "TOP-LEFT 2"; + linux,code = <BTN_TL2>; + }; + button-sw22 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "START"; + linux,code = <BTN_START>; + }; +}; + +&internal_display { + status = "disabled"; +}; + +&rk817_charger { + monitored-battery = <&battery>; +}; + +&pinctrl { + btns { + btn_pins: btn-pins { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + btn_pins_vol: btn-pins-vol { + rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + joystick { + mux_en_pins: mux-pins { + rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 49ae15708a0b..6d7a7bf72ac7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -102,6 +102,7 @@ l2: l2-cache0 { compatible = "cache"; + cache-level = <2>; }; }; @@ -1025,6 +1026,17 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + crypto: crypto@ff060000 { + compatible = "rockchip,rk3328-crypto"; + reg = <0x0 0xff060000 0x0 0x4000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_CRYPTO_MST>, <&cru HCLK_CRYPTO_SLV>, + <&cru SCLK_CRYPTO>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO>; + reset-names = "crypto-rst"; + }; + pinctrl: pinctrl { compatible = "rockchip,rk3328-pinctrl"; rockchip,grf = <&grf>; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts index 7f5bba0c6001..81d1064fdb21 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts @@ -208,11 +208,10 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; /* rtc_int is not connected */ }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts index 38d757c00548..5589f3db6b36 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-r88.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-r88.dts @@ -192,11 +192,10 @@ vin-supply = <&vcc_sys>; }; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; /* rtc_int is not connected */ }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi index ed3348b558f8..a47d9f758611 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi @@ -734,10 +734,6 @@ camera: &i2c7 { }; /* PINCTRL OVERRIDES */ -&ec_ap_int_l { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; -}; - &ap_fw_wp { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 2a332763c35c..9d9297bc5f04 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -123,7 +123,7 @@ keyup-threshold-microvolt = <1800000>; poll-interval = <100>; - recovery { + button-recovery { label = "Recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <18000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts index 452728b82e42..3bf8f959e42c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts @@ -39,7 +39,7 @@ keyup-threshold-microvolt = <1800000>; poll-interval = <100>; - recovery { + button-recovery { label = "Recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <18000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts index 72182c58cc46..65cb21837b0c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-m4b.dts @@ -19,7 +19,7 @@ keyup-threshold-microvolt = <1500000>; poll-interval = <100>; - recovery { + button-recovery { label = "Recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <18000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi index 278123b4f911..b6e082f1f6d9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi @@ -167,6 +167,7 @@ }; &emmc_phy { + rockchip,enable-strobe-pulldown; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts index 9e2e246e0bab..dba4d03bfc2b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts @@ -52,13 +52,13 @@ press-threshold-microvolt = <300000>; }; - back { + button-back { label = "Back"; linux,code = <KEY_BACK>; press-threshold-microvolt = <985000>; }; - menu { + button-menu { label = "Menu"; linux,code = <KEY_MENU>; press-threshold-microvolt = <1314000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts index 2e058c315025..04403a76238b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts @@ -81,6 +81,27 @@ regulator-max-microvolt = <1800000>; vin-supply = <&vcc3v3_sys>; }; + + wifi_pwrseq: sdio-wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk818 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h_pin>; + /* + * Wait between power-on and SDIO access for CYP43455 + * POR circuit. + */ + post-power-on-delay-ms = <110>; + /* + * Wait between consecutive toggles for CYP43455 CBUCK + * regulator discharge. + */ + power-off-delay-us = <10000>; + + /* WL_REG_ON on module */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; }; &cpu_l0 { @@ -360,11 +381,45 @@ }; }; + sdio-pwrseq { + wifi_enable_h_pin: wifi-enable-h-pin { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sound { vcc1v8_codec_en: vcc1v8-codec-en { rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>; }; }; + + wireless-bluetooth { + bt_wake_pin: bt-wake-pin { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_pin: bt-host-wake-pin { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reset_pin: bt-reset-pin { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; }; &sdmmc { @@ -393,6 +448,27 @@ status = "okay"; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&rk818 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 04c752f49be9..115c14c0a3c6 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -207,7 +207,7 @@ cap-sd-highspeed; cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; disable-wp; - max-frequency = <150000000>; + max-frequency = <40000000>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; vmmc-supply = <&vcc3v3_baseboard>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts index 5a2661ae0131..7ba1c28f70a9 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts @@ -98,13 +98,12 @@ }; &i2c0 { - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; interrupt-parent = <&gpio0>; interrupts = <RK_PA5 IRQ_TYPE_EDGE_FALLING>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "xin32k"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 2f4b1b2e3ac7..bbf1e3f24585 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -41,7 +41,7 @@ keyup-threshold-microvolt = <1500000>; poll-interval = <100>; - recovery { + button-recovery { label = "Recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <18000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts index f9884902f874..309c35d7fca8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-4c-plus.dts @@ -601,6 +601,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + &u2phy0 { status = "okay"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi index 645ced6617a6..1f76d3501bda 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi @@ -509,7 +509,6 @@ &i2s1 { rockchip,playback-channels = <2>; rockchip,capture-channels = <2>; - status = "okay"; }; &i2s2 { diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi index 94e39ed63397..c920ddf44baf 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi @@ -128,6 +128,8 @@ }; &hdmi { + avdd-0v9-supply = <&vcca0v9_hdmi>; + avdd-1v8-supply = <&vcca1v8_hdmi>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts index 13927e7d0724..dbec2b7173a0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts @@ -33,13 +33,13 @@ press-threshold-microvolt = <300000>; }; - back { + button-back { label = "Back"; linux,code = <KEY_BACK>; press-threshold-microvolt = <985000>; }; - menu { + button-menu { label = "Menu"; linux,code = <KEY_MENU>; press-threshold-microvolt = <1314000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 92c2207e686c..4391aea25984 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -582,6 +582,26 @@ status = "disabled"; }; + crypto0: crypto@ff8b0000 { + compatible = "rockchip,rk3399-crypto"; + reg = <0x0 0xff8b0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>; + reset-names = "master", "lave", "crypto"; + }; + + crypto1: crypto@ff8b8000 { + compatible = "rockchip,rk3399-crypto"; + reg = <0x0 0xff8b8000 0x0 0x4000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>; + clock-names = "hclk_master", "hclk_slave", "sclk"; + resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>; + reset-names = "master", "slave", "crypto"; + }; + i2c1: i2c@ff110000 { compatible = "rockchip,rk3399-i2c"; reg = <0x0 0xff110000 0x0 0x1000>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 935b8c68a71d..bf9eb0405b62 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -297,11 +297,10 @@ clock-frequency = <400000>; status = "okay"; - hym8563: hym8563@51 { + hym8563: rtc@51 { compatible = "haoyu,hym8563"; reg = <0x51>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "hym8563"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts index 7a20e2d6876a..63cff402f3a8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts @@ -5,7 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/pinctrl/rockchip.h> -#include "rk3566-anbernic-rgxx3.dtsi" +#include "rk3566-anbernic-rg353x.dtsi" / { model = "RG353P"; @@ -18,26 +18,66 @@ mmc3 = &sdmmc2; }; - backlight: backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_sys>; - pwms = <&pwm4 0 25000 0>; + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; }; -}; -&gpio_keys_control { - button-a { - gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; - label = "EAST"; - linux,code = <BTN_EAST>; + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; }; - button-left { - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; - label = "DPAD-LEFT"; - linux,code = <BTN_DPAD_LEFT>; + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; }; +}; +&gpio_keys_control { button-r1 { gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; label = "TR"; @@ -49,27 +89,6 @@ label = "TR2"; linux,code = <BTN_TR2>; }; - - button-right { - gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; - label = "DPAD-RIGHT"; - linux,code = <BTN_DPAD_RIGHT>; - }; - - button-y { - gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; - label = "WEST"; - linux,code = <BTN_WEST>; - }; -}; - -&i2c0 { - /* This hardware is physically present but unused. */ - power-monitor@62 { - compatible = "cellwise,cw2015"; - reg = <0x62>; - status = "disabled"; - }; }; &i2c2 { @@ -78,8 +97,22 @@ status = "okay"; }; -&pwm4 { - status = "okay"; +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; }; &sdhci { diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts new file mode 100644 index 000000000000..885234a023e1 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RG353V"; + compatible = "anbernic,rg353v", "rockchip,rk3566"; + + aliases { + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc1; + mmc3 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3151000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for headphones. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_int"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +&i2c2 { + pintctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "okay"; +}; + +&pinctrl { + touch { + touch_rst: touch-rst { + rockchip,pins = + <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; + +&sdhci { + pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>; + pinctrl-names = "default"; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts new file mode 100644 index 000000000000..a7dc462fe21f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353vs.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RG353VS"; + compatible = "anbernic,rg353vs", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3151000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for headphones. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_int"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "SPKO"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi new file mode 100644 index 000000000000..65a80d1f6d91 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi @@ -0,0 +1,60 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rgxx3.dtsi" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_sys>; + pwms = <&pwm4 0 25000 0>; + }; +}; + +&cru { + assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <1200000000>, <200000000>, <241500000>; +}; + +&gpio_keys_control { + button-a { + gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>; + label = "EAST"; + linux,code = <BTN_EAST>; + }; + + button-left { + gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + + button-right { + gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + + button-y { + gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>; + label = "WEST"; + linux,code = <BTN_WEST>; + }; +}; + +&i2c0 { + /* This hardware is physically present but unused. */ + power-monitor@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + status = "disabled"; + }; +}; + +&pwm4 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts index 3dc01549a5b4..5dafcc86296b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts @@ -17,6 +17,25 @@ mmc2 = &sdmmc2; }; + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + gpio_spi: spi { compatible = "spi-gpio"; pinctrl-names = "default"; @@ -29,6 +48,50 @@ cs-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; num-chipselects = <0>; }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&cru { + assigned-clocks = <&cru PLL_GPLL>, <&pmucru PLL_PPLL>, <&cru PLL_VPLL>; + assigned-clock-rates = <1200000000>, <200000000>, <500000000>; }; &gpio_keys_control { @@ -76,6 +139,13 @@ }; &pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gpio-spi { spi_pins: spi-pins { rockchip,pins = @@ -85,3 +155,12 @@ }; }; }; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi index 2b455143b86d..41262a69d33e 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi @@ -22,6 +22,7 @@ <&adc_mux 3>; pinctrl-0 = <&joy_mux_en>; pinctrl-names = "default"; + poll-interval = <60>; #address-cells = <1>; #size-cells = <0>; @@ -217,37 +218,6 @@ }; }; - /* Channels reversed for both headphones and speakers. */ - sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "anbernic_rk817"; - simple-audio-card,aux-devs = <&spk_amp>; - simple-audio-card,format = "i2s"; - simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Internal Speakers"; - simple-audio-card,routing = - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Internal Speakers", "Speaker Amp OUTL", - "Internal Speakers", "Speaker Amp OUTR", - "Speaker Amp INL", "HPOL", - "Speaker Amp INR", "HPOR"; - simple-audio-card,pin-switches = "Internal Speakers"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_8ch>; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk817 1>; @@ -258,14 +228,6 @@ reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>; }; - spk_amp: audio-amplifier { - compatible = "simple-audio-amplifier"; - enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&spk_amp_enable_h>; - pinctrl-names = "default"; - sound-name-prefix = "Speaker Amp"; - }; - vcc3v3_lcd0_n: regulator-vcc3v3-lcd0 { compatible = "regulator-fixed"; gpio = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; @@ -607,13 +569,6 @@ }; &pinctrl { - audio-amplifier { - spk_amp_enable_h: spk-amp-enable-h { - rockchip,pins = - <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - gpio-btns { btn_pins_ctrl: btn-pins-ctrl { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts new file mode 100644 index 000000000000..4c7f9abd594f --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Author: Piotr Oniszczuk piotr.oniszczuk@gmail.com + * Based on Quartz64 DT by: Peter Geis pgwipeout@gmail.com + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3566.dtsi" + +/ { + model = "Rockchip RK3566 BOX DEMO Board"; + compatible = "rockchip,rk3566-box-demo", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdhci; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio4 RK_PC3 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + linux,rc-map-name = "rc-beelink-gs1"; + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + led_work: led-0 { + gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_en>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h &wifi_32k>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + spdif_dit: spdif-dit { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + spdif_sound: spdif-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_dit>; + }; + }; + + vcc12v0_dcin: regulator-vcc12v0-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v0_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_sys: regulator-vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v0_dcin>; + }; + + vcc3v3_sys: regulator-vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v0_dcin>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc5v0_usb_host: regulator-vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb2_otg: regulator-vcc5v0-usb2-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb2_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcca_1v8: regulator-vcca-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdda_0v9: regulator-vdda-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + vdd_fixed: regulator-vdd-fixed { + compatible = "regulator-fixed"; + regulator-name = "vdd_fixed"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + vdd_cpu: regulator-vdd-cpu { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + }; + + vdd_logic: regulator-vdd-logic { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 5000 1>; + regulator-name = "vdd_logic"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-settling-time-up-us = <250>; + pwm-supply = <&vcc5v0_sys>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + phy-mode = "rgmii"; + clock_in_out = "input"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus + &gmac1m1_clkinout>; + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + + tx_delay = <0x4f>; + rx_delay = <0x2d>; + phy-handle = <&rgmii_phy1>; + status = "okay"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x1>; + }; +}; + +&hdmi { + assigned-clocks = <&cru CLK_HDMI_CEC>; + assigned-clock-rates = <32768>; + avdd-0v9-supply = <&vdda_0v9>; + avdd-1v8-supply = <&vcca_1v8>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_32k: wifi-32k { + rockchip,pins = <0 RK_PB0 2 &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb2_otg_en: vcc5v0_usb2_otg_en { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + }; + + ir { + ir_int: ir-int { + rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + led { + led_work_en: led_work_en { + rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcca_1v8>; + status = "okay"; +}; + +&spdif { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&pmucru CLK_RTC_32K>; + clock-names = "ext_clock"; + device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; + +&vpu { + status = "okay"; +}; + +&vdpu_mmu { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + vbus-supply = <&vcc5v0_usb2_otg>; + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 0d45868132b9..8d61f824c12d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -23,7 +23,7 @@ io-channel-names = "buttons"; keyup-threshold-microvolt = <1750000>; - recovery { + button-recovery { label = "recovery"; linux,code = <KEY_VENDOR>; press-threshold-microvolt = <0>; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index a05460b92415..25a8c781f4e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -740,7 +740,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; uart-has-rtscts; @@ -748,13 +748,14 @@ compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc_sys>; vddio-supply = <&vcca1v8_pmu>; + max-speed = <3000000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 77b179cd20e7..b276eb0810c7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -246,7 +246,7 @@ compatible = "rockchip,rk809"; reg = <0x20>; interrupt-parent = <&gpio0>; - interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; assigned-clocks = <&cru I2S1_MCLKOUT_TX>; assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; clock-names = "mclk"; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts index dba648c2f57e..61c7a3ad7387 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-roc-pc.dts @@ -82,6 +82,18 @@ vin-supply = <&usb_5v>; }; + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; @@ -122,6 +134,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -142,7 +158,7 @@ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; clock_in_out = "input"; - phy-mode = "rgmii-id"; + phy-mode = "rgmii"; phy-supply = <&vcc_3v3>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m0_miim @@ -432,11 +448,7 @@ &i2c3 { pinctrl-names = "default"; - pinctrl-0 = <&i2c3m1_xfer>; - status = "okay"; -}; - -&i2c5 { + pinctrl-0 = <&i2c3m0_xfer>; status = "okay"; }; @@ -447,6 +459,14 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -468,6 +488,16 @@ }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts new file mode 100644 index 000000000000..4e49bebf548b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-blade.dts @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> + +#include "rk3566-soquartz.dtsi" + +/ { + model = "PINE64 RK3566 SOQuartz on Blade carrier board"; + compatible = "pine64,soquartz-blade", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled VCC3V0_SD in schematic to not conflict with PMIC regulator */ + vcc3v0_sd: vcc3v0-sd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* labeled VCC_SSD in schematic */ + vcc3v3_pcie_p: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie_p"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbus>; + }; + + vcc5v_dcin: vcc5v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&combphy2 { + phy-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + +}; + +/* + * i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_DISK_ACTIVITY; + linux,default-trigger = "disk-activity"; + status = "okay"; +}; + +&led_work { + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + linux,default-trigger = "heartbeat"; + status = "okay"; +}; + +&pcie2x1 { + vpcie3v3-supply = <&vcc3v3_pcie_p>; + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +&sdmmc0 { + vmmc-supply = <&vcc3v0_sd>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* + * uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* + * uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vbus>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc5v_dcin>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts index e00568a6be5c..263ce40770dd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -30,6 +30,12 @@ }; }; +/* phy for pcie */ +&combphy2 { + phy-supply = <&vcc3v3_sys>; + status = "okay"; +}; + &gmac1 { status = "okay"; }; @@ -105,6 +111,11 @@ status = "okay"; }; +&pcie2x1 { + vpcie3v3-supply = <&vcc_3v3>; + status = "okay"; +}; + &rgmii_phy1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts new file mode 100644 index 000000000000..2208dbfb7f0a --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-model-a.dts @@ -0,0 +1,232 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-soquartz.dtsi" + +/ { + model = "PINE64 RK3566 SOQuartz on Model A carrier board"; + compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled DCIN_12V in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc5v0_usb: vcc5v0-usb-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + /* + * Labelled VCC3V0_SD in schematic to not conflict with PMIC + * regulator, it's 3.3v in actuality + */ + vcc3v0_sd: vcc3v0-sd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v0_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc12v_pcie: vcc12v-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +/* phy for pcie */ +&combphy2 { + phy-supply = <&vcc3v3_sys>; + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +/* + * i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + + /* + * the rtc interrupt is tied to PMIC_PWRON, + * it will force reset the board if triggered. + */ + pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; +}; + +/* + * i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* + * i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* + * i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* + * i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + status = "okay"; +}; + +&led_work { + status = "okay"; +}; + +&pcie2x1 { + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* + * saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +/* + * vmmc-supply is vcc3v3_sd on v1.0 and vcc3v0_sd on v1.1+ + * the soquartz SoM has SDMMC_PWR (CM1 pin 75) hardwired to vcc3v3_sys, + * so we use vcc3v3_sd here to ensure the regulator is enabled on older boards. + */ +&sdmmc0 { + vmmc-supply = <&vcc3v3_sd>; + status = "okay"; +}; + +/* + * spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* + * uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* + * uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc5v0_usb>; +}; + +&vcc3v3_sd { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi index 5bcd4be32964..ce7165d7f1a1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3566.dtsi" / { @@ -28,6 +29,17 @@ #clock-cells = <0>; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -143,6 +155,33 @@ status = "disabled"; }; +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -411,6 +450,10 @@ status = "disabled"; }; +&i2s0_8ch { + status = "okay"; +}; + /* * i2s1_8ch is exposed on CM1 / Module1A * pin 24 - i2s1_sdi1_m1 @@ -444,6 +487,12 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>; +}; + &pinctrl { bt { bt_enable_h: bt-enable-h { @@ -469,6 +518,15 @@ }; }; + pcie { + pcie_clkreq_h: pcie-clkreq-h { + rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_reset_h: pcie-reset-h { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; @@ -614,3 +672,20 @@ &usb_host0_xhci { status = "disabled"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts index c282f6e79960..26d7fda275ed 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts @@ -500,7 +500,6 @@ interrupt-parent = <&gpio0>; interrupts = <RK_PD3 IRQ_TYPE_EDGE_FALLING>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "rtcic_32kout"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts new file mode 100644 index 000000000000..59ecf868dbd0 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts @@ -0,0 +1,744 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2022 Hardkernel Co., Ltd. + * + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include "rk3568.dtsi" + +/ { + model = "Hardkernel ODROID-M1"; + compatible = "rockchip,rk3568-odroid-m1", "rockchip,rk3568"; + + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c3; + i2c3 = &i2c0; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + serial0 = &uart1; + serial1 = &uart0; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_receiver_pin>; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-0 { + gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_RED>; + default-state = "keep"; + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&led_power_pin>; + }; + led_work: led-1 { + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + function = LED_FUNCTION_HEARTBEAT; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&led_work_pin>; + }; + }; + + rk809-sound { + compatible = "simple-audio-card"; + pinctrl-names = "default"; + pinctrl-0 = <&hp_det_pin>; + simple-audio-card,name = "Analog RK817"; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Headphone", "Headphones", + "Speaker", "Speaker"; + simple-audio-card,routing = + "Headphones", "HPOL", + "Headphones", "HPOR", + "Speaker", "SPKO"; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + enable-active-high; + gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_pcie_en_pin>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <5000>; + vin-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_host"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en_pin>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb_otg"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en_pin>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&combphy0 { + /* Used for USB3 */ + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&combphy1 { + /* Used for USB3 */ + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&combphy2 { + /* used for SATA */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac0 { + assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; + assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>; + assigned-clock-rates = <0>, <125000000>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy0>; + phy-mode = "rgmii"; + phy-supply = <&vcc3v3_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&gmac0_miim + &gmac0_tx_bus2 + &gmac0_rx_bus2 + &gmac0_rgmii_clk + &gmac0_rgmii_bus>; + status = "okay"; + + tx_delay = <0x4f>; + rx_delay = <0x2d>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + #clock-cells = <1>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + #sound-dai-cells = <0>; + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + wakeup-source; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-name = "vdd_npu"; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-name = "vdda0v9_image"; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-name = "vdda_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-name = "vdda0v9_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-name = "vccio_acodec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-name = "vcc3v3_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-name = "vcca1v8_pmu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-name = "vcca1v8_image"; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + +&i2s1_8ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&mdio0 { + rgmii_phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + reset-assert-us = <20000>; + reset-deassert-us = <100000>; + reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + }; +}; + +&pcie30phy { + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_pin>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + fspi { + fspi_dual_io_pins: fspi-dual-io-pins { + rockchip,pins = + /* fspi_clk */ + <1 RK_PD0 1 &pcfg_pull_none>, + /* fspi_cs0n */ + <1 RK_PD3 1 &pcfg_pull_none>, + /* fspi_d0 */ + <1 RK_PD1 1 &pcfg_pull_none>, + /* fspi_d1 */ + <1 RK_PD2 1 &pcfg_pull_none>; + }; + }; + + ir-receiver { + ir_receiver_pin: ir-receiver-pin { + /* external pullup to VCC3V3_SYS */ + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_power_pin: led-power-pin { + rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + led_work_pin: led-work-pin { + rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_reset_pin: pcie-reset-pin { + rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin { + rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + rk809 { + hp_det_pin: hp-det-pin { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + bus-width = <4>; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr50; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&sfc { + /* Dual I/O mode as the D2 pin conflicts with the eMMC */ + pinctrl-0 = <&fspi_dual_io_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <100000000>; + spi-rx-bus-width = <2>; + spi-tx-bus-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0x0 0xe0000>; + }; + partition@e0000 { + label = "U-Boot Env"; + reg = <0xe0000 0x20000>; + }; + partition@100000 { + label = "U-Boot"; + reg = <0x100000 0x200000>; + }; + partition@300000 { + label = "splash"; + reg = <0x300000 0x100000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0xc00000>; + }; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts index fb87a168fe96..a1c5fdf7d68f 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts @@ -32,6 +32,13 @@ }; }; + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -60,13 +67,55 @@ }; }; - vcc12v_dcin: vcc12v-dcin { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; }; + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pi6c_03"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + vcc3v3_pcie: vcc3v3-pcie-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -79,7 +128,7 @@ vin-supply = <&vcc5v0_sys>; }; - vcc3v3_sys: vcc3v3-sys { + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -89,7 +138,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -99,7 +148,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb: vcc5v0-usb { + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -109,7 +158,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -144,7 +193,7 @@ vin-supply = <&vcc5v0_usb>; }; - vcc_cam: vcc-cam { + vcc_cam: vcc-cam-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; @@ -160,7 +209,7 @@ }; }; - vcc_mipi: vcc-mipi { + vcc_mipi: vcc-mipi-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; @@ -207,16 +256,17 @@ &gmac1 { assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + clock_in_out = "input"; phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk + &gmac1m1_clkinout &gmac1m1_rgmii_bus>; status = "okay"; }; @@ -509,7 +559,6 @@ interrupt-parent = <&gpio0>; interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; - clock-frequency = <32768>; clock-output-names = "rtcic_32kout"; pinctrl-names = "default"; pinctrl-0 = <&hym8563_int>; @@ -526,6 +575,11 @@ status = "okay"; }; +&i2s2_2ch { + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -546,6 +600,19 @@ status = "okay"; }; +&pcie30phy { + phy-supply = <&vcc3v3_pi6c_03>; + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2m1_pins>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { cam { vcc_cam_en: vcc_cam_en { @@ -605,6 +672,26 @@ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + bt { + bt_enable: bt-enable { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake: bt-wake { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable: wifi-enable { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -649,12 +736,50 @@ status = "okay"; }; +&sdmmc2 { + supports-sdio; + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + /* vddio comes from regulator on module, use IO bank voltage instead */ + }; +}; + &uart2 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi index 164708f1eb67..5706c3e24f0a 100644 --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi @@ -1049,20 +1049,6 @@ status = "disabled"; }; - spdif: spdif@fe460000 { - compatible = "rockchip,rk3568-spdif"; - reg = <0x0 0xfe460000 0x0 0x1000>; - interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "mclk", "hclk"; - clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; - dmas = <&dmac1 1>; - dma-names = "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spdifm0_tx>; - #sound-dai-cells = <0>; - status = "disabled"; - }; - i2s0_8ch: i2s@fe400000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe400000 0x0 0x1000>; @@ -1105,6 +1091,28 @@ status = "disabled"; }; + i2s2_2ch: i2s@fe420000 { + compatible = "rockchip,rk3568-i2s-tdm"; + reg = <0x0 0xfe420000 0x0 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru CLK_I2S2_2CH_SRC>; + assigned-clock-rates = <1188000000>; + clocks = <&cru MCLK_I2S2_2CH>, <&cru MCLK_I2S2_2CH>, <&cru HCLK_I2S2_2CH>; + clock-names = "mclk_tx", "mclk_rx", "hclk"; + dmas = <&dmac1 4>, <&dmac1 5>; + dma-names = "tx", "rx"; + resets = <&cru SRST_M_I2S2_2CH>; + reset-names = "m"; + rockchip,grf = <&grf>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2m0_sclktx + &i2s2m0_lrcktx + &i2s2m0_sdi + &i2s2m0_sdo>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + i2s3_2ch: i2s@fe430000 { compatible = "rockchip,rk3568-i2s-tdm"; reg = <0x0 0xfe430000 0x0 0x1000>; @@ -1142,6 +1150,20 @@ status = "disabled"; }; + spdif: spdif@fe460000 { + compatible = "rockchip,rk3568-spdif"; + reg = <0x0 0xfe460000 0x0 0x1000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "mclk", "hclk"; + clocks = <&cru MCLK_SPDIF_8CH>, <&cru HCLK_SPDIF_8CH>; + dmas = <&dmac1 1>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdifm0_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + dmac0: dma-controller@fe530000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xfe530000 0x0 0x4000>; |