diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi index 6138b58db6d2..6ab830d01867 100644 --- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi @@ -74,6 +74,23 @@ cpu-idle-states = <&BIG_CPU_SLEEP_1>; }; +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + &qusb2phy { status = "okay"; @@ -292,3 +309,35 @@ vdda-phy-supply = <&vreg_l1a_0p875>; vdda-pll-supply = <&vreg_l2a_1p2>; }; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - board-specific pinctrl */ +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; |