diff options
Diffstat (limited to 'arch/arm64/boot/dts/exynos/exynos7.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/exynos/exynos7.dtsi | 111 |
1 files changed, 74 insertions, 37 deletions
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index 5558045637ac..b9ed6a33e290 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -29,7 +29,7 @@ }; arm-pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, @@ -83,7 +83,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -105,33 +105,26 @@ <0x11006000 0x2000>; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@10e10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10E10000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_fsys0 ACLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@10e10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10E10000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 ACLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: pdma@10eb0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10EB0000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_fsys0 ACLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: pdma@10eb0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10EB0000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 ACLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; clock_topc: clock-controller@10570000 { @@ -220,9 +213,14 @@ #clock-cells = <1>; clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, <&clock_top1 DOUT_SCLK_MMC0>, - <&clock_top1 DOUT_SCLK_MMC1>; + <&clock_top1 DOUT_SCLK_MMC1>, + <&clock_top1 DOUT_SCLK_UFSUNIPRO20>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>; clock-names = "fin_pll", "dout_aclk_fsys1_200", - "dout_sclk_mmc0", "dout_sclk_mmc1"; + "dout_sclk_mmc0", "dout_sclk_mmc1", + "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1", + "dout_sclk_phy_fsys1_26m"; }; serial_0: serial@13630000 { @@ -576,6 +574,11 @@ pwm: pwm@136c0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x136c0000 0x100>; + interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; clocks = <&clock_peric0 PCLK_PWM>; @@ -592,13 +595,38 @@ #thermal-sensor-cells = <0>; }; - thermal-zones { - atlas_thermal: cluster0-thermal { - polling-delay-passive = <0>; /* milliseconds */ - polling-delay = <0>; /* milliseconds */ - thermal-sensors = <&tmuctrl_0>; - #include "exynos7-trip-points.dtsi" - }; + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, /* 0: HCI standard */ + <0x15570100 0x100>, /* 1: Vendor specificed */ + <0x15571000 0x200>, /* 2: UNIPRO */ + <0x15572000 0x300>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", + "tx0_symbol_clk"; }; usbdrd_phy: phy@15500000 { @@ -636,6 +664,15 @@ }; }; + thermal-zones { + atlas_thermal: cluster0-thermal { + polling-delay-passive = <0>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + thermal-sensors = <&tmuctrl_0>; + #include "exynos7-trip-points.dtsi" + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 |