diff options
Diffstat (limited to 'arch/arm/plat-s5p')
33 files changed, 78 insertions, 1403 deletions
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9a197e55f669..ab16e5568c4c 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -16,9 +16,6 @@ config PLAT_S5P select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_GPIOLIB_4BIT - select S3C_GPIO_CFG_S3C64XX - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER @@ -42,6 +39,12 @@ config S5P_HRT help Use the High Resolution timer support +config S5P_PM + bool + help + Common code for power management support on S5P and newer SoCs + Note: Do not select this for S5P6440 and S5P6450. + comment "System MMU" config S5P_SYSTEM_MMU @@ -50,6 +53,12 @@ config S5P_SYSTEM_MMU help Say Y here if you want to enable System MMU +config S5P_SLEEP + bool + help + Internal config node to apply common S5P sleep management code. + Can be selected by S5P and newer SoCs with similar sleep procedure. + config S5P_DEV_FIMC0 bool help @@ -75,6 +84,11 @@ config S5P_DEV_FIMD0 help Compile in platform device definitions for FIMD controller 0 +config S5P_DEV_I2C_HDMIPHY + bool + help + Compile in platform device definitions for I2C HDMIPHY controller + config S5P_DEV_MFC bool help @@ -95,6 +109,11 @@ config S5P_DEV_CSIS1 help Compile in platform device definitions for MIPI-CSIS channel 1 +config S5P_DEV_TV + bool + help + Compile in platform device definition for TV interface + config S5P_DEV_USB_EHCI bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4b53e04eeca4..876344038b8d 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -12,7 +12,6 @@ obj- := # Core files -obj-y += dev-pmu.o obj-y += dev-uart.o obj-y += cpu.o obj-y += clock.o @@ -20,19 +19,10 @@ obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o +obj-$(CONFIG_S5P_SLEEP) += sleep.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o -obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o -obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o -obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o -obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o -obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o -obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o -obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o -obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o -obj-$(CONFIG_S5P_DEV_USB_EHCI) += dev-ehci.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/dev-csis0.c b/arch/arm/plat-s5p/dev-csis0.c deleted file mode 100644 index e3aabef5e347..000000000000 --- a/arch/arm/plat-s5p/dev-csis0.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 0 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis0_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS0, - .end = S5P_PA_MIPI_CSIS0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS0, - .end = IRQ_MIPI_CSIS0, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s5p_device_mipi_csis0 = { - .name = "s5p-mipi-csis", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_mipi_csis0_resource), - .resource = s5p_mipi_csis0_resource, -}; diff --git a/arch/arm/plat-s5p/dev-csis1.c b/arch/arm/plat-s5p/dev-csis1.c deleted file mode 100644 index 08b91b580207..000000000000 --- a/arch/arm/plat-s5p/dev-csis1.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series device definition for MIPI-CSIS channel 1 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <mach/map.h> - -static struct resource s5p_mipi_csis1_resource[] = { - [0] = { - .start = S5P_PA_MIPI_CSIS1, - .end = S5P_PA_MIPI_CSIS1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MIPI_CSIS1, - .end = IRQ_MIPI_CSIS1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_mipi_csis1 = { - .name = "s5p-mipi-csis", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_mipi_csis1_resource), - .resource = s5p_mipi_csis1_resource, -}; diff --git a/arch/arm/plat-s5p/dev-ehci.c b/arch/arm/plat-s5p/dev-ehci.c deleted file mode 100644 index 94080fff9e9b..000000000000 --- a/arch/arm/plat-s5p/dev-ehci.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <mach/irqs.h> -#include <mach/map.h> -#include <plat/devs.h> -#include <plat/ehci.h> -#include <plat/usb-phy.h> - -/* USB EHCI Host Controller registration */ -static struct resource s5p_ehci_resource[] = { - [0] = { - .start = S5P_PA_EHCI, - .end = S5P_PA_EHCI + SZ_256 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_USB_HOST, - .end = IRQ_USB_HOST, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s5p_device_ehci_dmamask = 0xffffffffUL; - -struct platform_device s5p_device_ehci = { - .name = "s5p-ehci", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_ehci_resource), - .resource = s5p_ehci_resource, - .dev = { - .dma_mask = &s5p_device_ehci_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - -void __init s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd) -{ - struct s5p_ehci_platdata *npd; - - npd = s3c_set_platdata(pd, sizeof(struct s5p_ehci_platdata), - &s5p_device_ehci); - - if (!npd->phy_init) - npd->phy_init = s5p_usb_phy_init; - if (!npd->phy_exit) - npd->phy_exit = s5p_usb_phy_exit; -} diff --git a/arch/arm/plat-s5p/dev-fimc0.c b/arch/arm/plat-s5p/dev-fimc0.c deleted file mode 100644 index 608770fc1531..000000000000 --- a/arch/arm/plat-s5p/dev-fimc0.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc0.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC0 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc0_resource[] = { - [0] = { - .start = S5P_PA_FIMC0, - .end = S5P_PA_FIMC0 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC0, - .end = IRQ_FIMC0, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc0_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc0 = { - .name = "s5p-fimc", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimc0_resource), - .resource = s5p_fimc0_resource, - .dev = { - .dma_mask = &s5p_fimc0_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc1.c b/arch/arm/plat-s5p/dev-fimc1.c deleted file mode 100644 index 76e3a97a87d3..000000000000 --- a/arch/arm/plat-s5p/dev-fimc1.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc1.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC1 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc1_resource[] = { - [0] = { - .start = S5P_PA_FIMC1, - .end = S5P_PA_FIMC1 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC1, - .end = IRQ_FIMC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc1_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc1 = { - .name = "s5p-fimc", - .id = 1, - .num_resources = ARRAY_SIZE(s5p_fimc1_resource), - .resource = s5p_fimc1_resource, - .dev = { - .dma_mask = &s5p_fimc1_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc2.c b/arch/arm/plat-s5p/dev-fimc2.c deleted file mode 100644 index 24d29816fa2c..000000000000 --- a/arch/arm/plat-s5p/dev-fimc2.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc2.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC2 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc2_resource[] = { - [0] = { - .start = S5P_PA_FIMC2, - .end = S5P_PA_FIMC2 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC2, - .end = IRQ_FIMC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc2_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc2 = { - .name = "s5p-fimc", - .id = 2, - .num_resources = ARRAY_SIZE(s5p_fimc2_resource), - .resource = s5p_fimc2_resource, - .dev = { - .dma_mask = &s5p_fimc2_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimc3.c b/arch/arm/plat-s5p/dev-fimc3.c deleted file mode 100644 index ef31beca386c..000000000000 --- a/arch/arm/plat-s5p/dev-fimc3.c +++ /dev/null @@ -1,43 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimc3.c - * - * Copyright (c) 2010 Samsung Electronics - * - * Base S5P FIMC3 resource and device definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <mach/map.h> - -static struct resource s5p_fimc3_resource[] = { - [0] = { - .start = S5P_PA_FIMC3, - .end = S5P_PA_FIMC3 + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMC3, - .end = IRQ_FIMC3, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 s5p_fimc3_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimc3 = { - .name = "s5p-fimc", - .id = 3, - .num_resources = ARRAY_SIZE(s5p_fimc3_resource), - .resource = s5p_fimc3_resource, - .dev = { - .dma_mask = &s5p_fimc3_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c deleted file mode 100644 index f728bb5abcef..000000000000 --- a/arch/arm/plat-s5p/dev-fimd0.c +++ /dev/null @@ -1,67 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-fimd0.c - * - * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Core file for Samsung Display Controller (FIMD) driver - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/fb.h> -#include <linux/gfp.h> -#include <linux/dma-mapping.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -#include <plat/fb.h> -#include <plat/devs.h> -#include <plat/cpu.h> - -static struct resource s5p_fimd0_resource[] = { - [0] = { - .start = S5P_PA_FIMD0, - .end = S5P_PA_FIMD0 + SZ_32K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_FIMD0_VSYNC, - .end = IRQ_FIMD0_VSYNC, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_FIMD0_FIFO, - .end = IRQ_FIMD0_FIFO, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = IRQ_FIMD0_SYSTEM, - .end = IRQ_FIMD0_SYSTEM, - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 fimd0_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_fimd0 = { - .name = "s5p-fb", - .id = 0, - .num_resources = ARRAY_SIZE(s5p_fimd0_resource), - .resource = s5p_fimd0_resource, - .dev = { - .dma_mask = &fimd0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) -{ - s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), - &s5p_device_fimd0); -} diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c index 94226a0010f7..a30d36b7f61b 100644 --- a/arch/arm/plat-s5p/dev-mfc.c +++ b/arch/arm/plat-s5p/dev-mfc.c @@ -22,56 +22,6 @@ #include <plat/irqs.h> #include <plat/mfc.h> -static struct resource s5p_mfc_resource[] = { - [0] = { - .start = S5P_PA_MFC, - .end = S5P_PA_MFC + SZ_64K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_MFC, - .end = IRQ_MFC, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device s5p_device_mfc = { - .name = "s5p-mfc", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_mfc_resource), - .resource = s5p_mfc_resource, -}; - -/* - * MFC hardware has 2 memory interfaces which are modelled as two separate - * platform devices to let dma-mapping distinguish between them. - * - * MFC parent device (s5p_device_mfc) must be registered before memory - * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). - */ - -static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32); - -struct platform_device s5p_device_mfc_l = { - .name = "s5p-mfc-l", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_mfc_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - -struct platform_device s5p_device_mfc_r = { - .name = "s5p-mfc-r", - .id = -1, - .dev = { - .parent = &s5p_device_mfc.dev, - .dma_mask = &s5p_mfc_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, -}; - struct s5p_mfc_reserved_mem { phys_addr_t base; unsigned long size; diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c deleted file mode 100644 index 20336c8f2479..000000000000 --- a/arch/arm/plat-s5p/dev-onenand.c +++ /dev/null @@ -1,45 +0,0 @@ -/* linux/arch/arm/plat-s5p/dev-onenand.c - * - * Copyright 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright (c) 2008-2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * S5P series device definition for OneNAND devices - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include <mach/map.h> - -static struct resource s5p_onenand_resources[] = { - [0] = { - .start = S5P_PA_ONENAND, - .end = S5P_PA_ONENAND + SZ_128K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = S5P_PA_ONENAND_DMA, - .end = S5P_PA_ONENAND_DMA + SZ_8K - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { - .start = IRQ_ONENAND_AUDI, - .end = IRQ_ONENAND_AUDI, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device s5p_device_onenand = { - .name = "s5pc110-onenand", - .id = -1, - .num_resources = ARRAY_SIZE(s5p_onenand_resources), - .resource = s5p_onenand_resources, -}; diff --git a/arch/arm/plat-s5p/dev-pmu.c b/arch/arm/plat-s5p/dev-pmu.c deleted file mode 100644 index a08576da72b0..000000000000 --- a/arch/arm/plat-s5p/dev-pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/plat-s5p/dev-pmu.c - * - * Copyright (C) 2010 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/platform_device.h> -#include <asm/pmu.h> -#include <mach/irqs.h> - -static struct resource s5p_pmu_resource = { - .start = IRQ_PMU, - .end = IRQ_PMU, - .flags = IORESOURCE_IRQ, -}; - -struct platform_device s5p_device_pmu = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .num_resources = 1, - .resource = &s5p_pmu_resource, -}; - -static int __init s5p_pmu_init(void) -{ - platform_device_register(&s5p_device_pmu); - return 0; -} -arch_initcall(s5p_pmu_init); diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-s5p/include/plat/camport.h deleted file mode 100644 index 71688c8ba288..000000000000 --- a/arch/arm/plat-s5p/include/plat/camport.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co., Ltd. - * - * S5P series camera interface helper functions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_CAMPORT_H_ -#define PLAT_S5P_CAMPORT_H_ __FILE__ - -enum s5p_camport_id { - S5P_CAMPORT_A, - S5P_CAMPORT_B, -}; - -/* - * The helper functions to configure GPIO for the camera parallel bus. - * The camera port can be multiplexed with any FIMC entity, even multiple - * FIMC entities are allowed to be attached to a single port simultaneously. - * These functions are to be used in the board setup code. - */ -int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); -int exynos4_fimc_setup_gpio(enum s5p_camport_id id); - -#endif diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-s5p/include/plat/ehci.h deleted file mode 100644 index 6ae6810c7569..000000000000 --- a/arch/arm/plat-s5p/include/plat/ehci.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_S5P_EHCI_H -#define __PLAT_S5P_EHCI_H - -struct s5p_ehci_platdata { - int (*phy_init)(struct platform_device *pdev, int type); - int (*phy_exit)(struct platform_device *pdev, int type); -}; - -extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); - -#endif /* __PLAT_S5P_EHCI_H */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h deleted file mode 100644 index f680a143e38c..000000000000 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/exynos4.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for exynos4 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for EXYNOS4 related SoCs */ - -extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void exynos4_register_clocks(void); -extern void exynos4210_register_clocks(void); -extern void exynos4212_register_clocks(void); -extern void exynos4_setup_clocks(void); - -#ifdef CONFIG_ARCH_EXYNOS4 -extern int exynos4_init(void); -extern void exynos4_init_irq(void); -extern void exynos4_map_io(void); -extern void exynos4_init_clocks(int xtal); -extern struct sys_timer exynos4_timer; - -#define exynos4_init_uarts exynos4_common_init_uarts - -#else -#define exynos4_init_clocks NULL -#define exynos4_init_uarts NULL -#define exynos4_map_io NULL -#define exynos4_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h deleted file mode 100644 index 144dbfc6506d..000000000000 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ /dev/null @@ -1,80 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/irqs.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P Common IRQ support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_IRQS_H -#define __ASM_PLAT_S5P_IRQS_H __FILE__ - -/* we keep the first set of CPU IRQs out of the range of - * the ISA space, so that the PC104 has them to itself - * and we don't end up having to do horrible things to the - * standard ISA drivers.... - * - * note, since we're using the VICs, our start must be a - * mulitple of 32 to allow the common code to work - */ - -#define S5P_IRQ_OFFSET (32) - -#define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET) - -#define S5P_VIC0_BASE S5P_IRQ(0) -#define S5P_VIC1_BASE S5P_IRQ(32) -#define S5P_VIC2_BASE S5P_IRQ(64) -#define S5P_VIC3_BASE S5P_IRQ(96) - -#define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32)) - -#define IRQ_VIC0_BASE S5P_VIC0_BASE -#define IRQ_VIC1_BASE S5P_VIC1_BASE -#define IRQ_VIC2_BASE S5P_VIC2_BASE - -/* VIC based IRQs */ - -#define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x)) -#define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x)) -#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x)) -#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x)) - -#define S5P_TIMER_IRQ(x) (11 + (x)) - -#define IRQ_TIMER0 S5P_TIMER_IRQ(0) -#define IRQ_TIMER1 S5P_TIMER_IRQ(1) -#define IRQ_TIMER2 S5P_TIMER_IRQ(2) -#define IRQ_TIMER3 S5P_TIMER_IRQ(3) -#define IRQ_TIMER4 S5P_TIMER_IRQ(4) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ - : ((x) - 16 + S5P_EINT_BASE2)) - -#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ - ((irq) - S5P_EINT_BASE1) : \ - ((irq) + 16 - S5P_EINT_BASE2)) - -#define IRQ_EINT_BIT(x) EINT_OFFSET(x) - -/* Typically only a few gpio chips require gpio interrupt support. - To avoid memory waste irq descriptors are allocated only for - S5P_GPIOINT_GROUP_COUNT chips, each with total number of - S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged - to any gpio chip with the s5p_register_gpio_interrupt() function */ -#define S5P_GPIOINT_GROUP_COUNT 4 -#define S5P_GPIOINT_GROUP_SIZE 8 -#define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE) - -/* IRQ types common for all s5p platforms */ -#define S5P_IRQ_TYPE_LEVEL_LOW (0x00) -#define S5P_IRQ_TYPE_LEVEL_HIGH (0x01) -#define S5P_IRQ_TYPE_EDGE_FALLING (0x02) -#define S5P_IRQ_TYPE_EDGE_RISING (0x03) -#define S5P_IRQ_TYPE_EDGE_BOTH (0x04) - -#endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h deleted file mode 100644 index 6697f8cb2949..000000000000 --- a/arch/arm/plat-s5p/include/plat/mfc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_S5P_MFC_H -#define __PLAT_S5P_MFC_H - -/** - * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver - * @rbase: base address for MFC 'right' memory interface - * @rsize: size of the memory reserved for MFC 'right' interface - * @lbase: base address for MFC 'left' memory interface - * @lsize: size of the memory reserved for MFC 'left' interface - * - * This function reserves system memory for both MFC device memory - * interfaces and registers it to respective struct device entries as - * coherent memory. - */ -void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, - phys_addr_t lbase, unsigned int lsize); - -#endif /* __PLAT_S5P_MFC_H */ diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-s5p/include/plat/mipi_csis.h deleted file mode 100644 index 9bd254c5ed22..000000000000 --- a/arch/arm/plat-s5p/include/plat/mipi_csis.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. - * - * S5P series MIPI CSI slave device support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef PLAT_S5P_MIPI_CSIS_H_ -#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ - -struct platform_device; - -/** - * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver - * @clk_rate: bus clock frequency - * @lanes: number of data lanes used - * @alignment: data alignment in bits - * @hs_settle: HS-RX settle time - * @fixed_phy_vdd: false to enable external D-PHY regulator management in the - * driver or true in case this regulator has no enable function - * @phy_enable: pointer to a callback controlling D-PHY enable/reset - */ -struct s5p_platform_mipi_csis { - unsigned long clk_rate; - u8 lanes; - u8 alignment; - u8 hs_settle; - bool fixed_phy_vdd; - int (*phy_enable)(struct platform_device *pdev, bool on); -}; - -/** - * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control - * @pdev: MIPI-CSIS platform device - * @on: true to enable D-PHY and deassert its reset - * false to disable D-PHY - */ -int s5p_csis_phy_enable(struct platform_device *pdev, bool on); - -#endif /* PLAT_S5P_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h deleted file mode 100644 index 3e21b9444cc5..000000000000 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ /dev/null @@ -1,203 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/pll.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P PLL code - * - * Based on arch/arm/plat-s3c64xx/include/plat/pll.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/div64.h> - -#define PLL35XX_MDIV_MASK (0x3FF) -#define PLL35XX_PDIV_MASK (0x3F) -#define PLL35XX_SDIV_MASK (0x7) -#define PLL35XX_MDIV_SHIFT (16) -#define PLL35XX_PDIV_SHIFT (8) -#define PLL35XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK; - pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK; - sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL36XX_KDIV_MASK (0xFFFF) -#define PLL36XX_MDIV_MASK (0x1FF) -#define PLL36XX_PDIV_MASK (0x3F) -#define PLL36XX_SDIV_MASK (0x7) -#define PLL36XX_MDIV_SHIFT (16) -#define PLL36XX_PDIV_SHIFT (8) -#define PLL36XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll36xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK; - kdiv = pll_con1 & PLL36XX_KDIV_MASK; - - tmp = baseclk; - - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL45XX_MDIV_MASK (0x3FF) -#define PLL45XX_PDIV_MASK (0x3F) -#define PLL45XX_SDIV_MASK (0x7) -#define PLL45XX_MDIV_SHIFT (16) -#define PLL45XX_PDIV_SHIFT (8) -#define PLL45XX_SDIV_SHIFT (0) - -enum pll45xx_type_t { - pll_4500, - pll_4502, - pll_4508 -}; - -static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, - enum pll45xx_type_t pll_type) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK; - pdiv = (pll_con >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK; - sdiv = (pll_con >> PLL45XX_SDIV_SHIFT) & PLL45XX_SDIV_MASK; - - if (pll_type == pll_4508) - sdiv = sdiv - 1; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -#define PLL46XX_KDIV_MASK (0xFFFF) -#define PLL4650C_KDIV_MASK (0xFFF) -#define PLL46XX_MDIV_MASK (0x1FF) -#define PLL46XX_PDIV_MASK (0x3F) -#define PLL46XX_SDIV_MASK (0x7) -#define PLL46XX_MDIV_SHIFT (16) -#define PLL46XX_PDIV_SHIFT (8) -#define PLL46XX_SDIV_SHIFT (0) - -enum pll46xx_type_t { - pll_4600, - pll_4650, - pll_4650c, -}; - -static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, - u32 pll_con0, u32 pll_con1, - enum pll46xx_type_t pll_type) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con0 >> PLL46XX_MDIV_SHIFT) & PLL46XX_MDIV_MASK; - pdiv = (pll_con0 >> PLL46XX_PDIV_SHIFT) & PLL46XX_PDIV_MASK; - sdiv = (pll_con0 >> PLL46XX_SDIV_SHIFT) & PLL46XX_SDIV_MASK; - - if (pll_type == pll_4650c) - kdiv = pll_con1 & PLL4650C_KDIV_MASK; - else - kdiv = pll_con1 & PLL46XX_KDIV_MASK; - - tmp = baseclk; - - if (pll_type == pll_4600) { - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - } else { - tmp *= (mdiv << 10) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 10; - } - - return result; -} - -#define PLL90XX_MDIV_MASK (0xFF) -#define PLL90XX_PDIV_MASK (0x3F) -#define PLL90XX_SDIV_MASK (0x7) -#define PLL90XX_KDIV_MASK (0xffff) -#define PLL90XX_MDIV_SHIFT (16) -#define PLL90XX_PDIV_SHIFT (8) -#define PLL90XX_SDIV_SHIFT (0) -#define PLL90XX_KDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, - u32 pll_con, u32 pll_conk) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll_con >> PLL90XX_MDIV_SHIFT) & PLL90XX_MDIV_MASK; - pdiv = (pll_con >> PLL90XX_PDIV_SHIFT) & PLL90XX_PDIV_MASK; - sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; - kdiv = pll_conk & PLL90XX_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} - -#define PLL65XX_MDIV_MASK (0x3FF) -#define PLL65XX_PDIV_MASK (0x3F) -#define PLL65XX_SDIV_MASK (0x7) -#define PLL65XX_MDIV_SHIFT (16) -#define PLL65XX_PDIV_SHIFT (8) -#define PLL65XX_SDIV_SHIFT (0) - -static inline unsigned long s5p_get_pll65xx(unsigned long baseclk, u32 pll_con) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pll_con >> PLL65XX_MDIV_SHIFT) & PLL65XX_MDIV_MASK; - pdiv = (pll_con >> PLL65XX_PDIV_SHIFT) & PLL65XX_PDIV_MASK; - sdiv = (pll_con >> PLL65XX_SDIV_SHIFT) & PLL65XX_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-s5p/include/plat/regs-srom.h deleted file mode 100644 index f121ab5e76cb..000000000000 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * S5P SROMC register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_REGS_SROM_H -#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ - -#include <mach/map.h> - -#define S5P_SROMREG(x) (S5P_VA_SROMC + (x)) - -#define S5P_SROM_BW S5P_SROMREG(0x0) -#define S5P_SROM_BC0 S5P_SROMREG(0x4) -#define S5P_SROM_BC1 S5P_SROMREG(0x8) -#define S5P_SROM_BC2 S5P_SROMREG(0xc) -#define S5P_SROM_BC3 S5P_SROMREG(0x10) -#define S5P_SROM_BC4 S5P_SROMREG(0x14) -#define S5P_SROM_BC5 S5P_SROMREG(0x18) - -/* one register BW holds 4 x 4-bit packed settings for NCS0 - NCS3 */ - -#define S5P_SROM_BW__DATAWIDTH__SHIFT 0 -#define S5P_SROM_BW__ADDRMODE__SHIFT 1 -#define S5P_SROM_BW__WAITENABLE__SHIFT 2 -#define S5P_SROM_BW__BYTEENABLE__SHIFT 3 - -#define S5P_SROM_BW__CS_MASK 0xf - -#define S5P_SROM_BW__NCS0__SHIFT 0 -#define S5P_SROM_BW__NCS1__SHIFT 4 -#define S5P_SROM_BW__NCS2__SHIFT 8 -#define S5P_SROM_BW__NCS3__SHIFT 12 -#define S5P_SROM_BW__NCS4__SHIFT 16 -#define S5P_SROM_BW__NCS5__SHIFT 20 - -/* applies to same to BCS0 - BCS3 */ - -#define S5P_SROM_BCX__PMC__SHIFT 0 -#define S5P_SROM_BCX__TACP__SHIFT 4 -#define S5P_SROM_BCX__TCAH__SHIFT 8 -#define S5P_SROM_BCX__TCOH__SHIFT 12 -#define S5P_SROM_BCX__TACC__SHIFT 16 -#define S5P_SROM_BCX__TCOS__SHIFT 24 -#define S5P_SROM_BCX__TACS__SHIFT 28 - -#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-s5p/include/plat/reset.h deleted file mode 100644 index 335e97812eed..000000000000 --- a/arch/arm/plat-s5p/include/plat/reset.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_RESET_H -#define __ASM_PLAT_S5P_RESET_H __FILE__ - -extern void (*s5p_reset_hook)(void); - -#endif /* __ASM_PLAT_S5P_RESET_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h deleted file mode 100644 index 769b5bdfb046..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ /dev/null @@ -1,55 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_CLOCK_H -#define __ASM_PLAT_S5P_CLOCK_H __FILE__ - -#include <linux/clk.h> - -#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) - -#define clk_fin_apll clk_ext_xtal_mux -#define clk_fin_mpll clk_ext_xtal_mux -#define clk_fin_epll clk_ext_xtal_mux -#define clk_fin_dpll clk_ext_xtal_mux -#define clk_fin_vpll clk_ext_xtal_mux -#define clk_fin_hpll clk_ext_xtal_mux - -extern struct clk clk_ext_xtal_mux; -extern struct clk clk_xusbxti; -extern struct clk clk_48m; -extern struct clk s5p_clk_27m; -extern struct clk clk_fout_apll; -extern struct clk clk_fout_mpll; -extern struct clk clk_fout_epll; -extern struct clk clk_fout_dpll; -extern struct clk clk_fout_vpll; -extern struct clk clk_arm; -extern struct clk clk_vpll; - -extern struct clksrc_sources clk_src_apll; -extern struct clksrc_sources clk_src_mpll; -extern struct clksrc_sources clk_src_epll; -extern struct clksrc_sources clk_src_dpll; - -extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); - -/* Common EPLL operations for S5P platform */ -extern int s5p_epll_enable(struct clk *clk, int enable); -extern unsigned long s5p_epll_get_rate(struct clk *clk); - -/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */ -extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate); -extern unsigned long s5p_spdif_get_rate(struct clk *clk); - -extern struct clk_ops s5p_sclk_spdif_ops; -#endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h deleted file mode 100644 index 575e88109db8..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5p-time.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h - * - * Copyright 2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p time support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S5P_TIME_H -#define __ASM_PLAT_S5P_TIME_H __FILE__ - -/* S5P HR-Timer Clock mode */ -enum s5p_timer_mode { - S5P_PWM0, - S5P_PWM1, - S5P_PWM2, - S5P_PWM3, - S5P_PWM4, -}; - -struct s5p_timer_source { - unsigned int event_id; - unsigned int source_id; -}; - -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define S5PTIMER_MIN_RANGE 4 - -#define TCNT_MAX 0xffffffff -#define NON_PERIODIC 0 -#define PERIODIC 1 - -extern void __init s5p_set_timer_source(enum s5p_timer_mode event, - enum s5p_timer_mode source); -extern struct sys_timer s5p_timer; -#endif /* __ASM_PLAT_S5P_TIME_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-s5p/include/plat/s5p6440.h deleted file mode 100644 index 528585d2cafc..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6440.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6440 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - /* Common init code for S5P6440 related SoCs */ - -extern void s5p6440_register_clocks(void); -extern void s5p6440_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6440 - -extern int s5p64x0_init(void); -extern void s5p6440_init_irq(void); -extern void s5p6440_map_io(void); -extern void s5p6440_init_clocks(int xtal); - -extern void s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6440_init_clocks NULL -#define s5p6440_init_uarts NULL -#define s5p6440_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6440 timer */ - -extern struct sys_timer s5p6440_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-s5p/include/plat/s5p6450.h deleted file mode 100644 index 640a41c26be3..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6450.h +++ /dev/null @@ -1,36 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6450.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Header file for s5p6450 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6450 related SoCs */ - -extern void s5p6450_register_clocks(void); -extern void s5p6450_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6450 - -extern int s5p64x0_init(void); -extern void s5p6450_init_irq(void); -extern void s5p6450_map_io(void); -extern void s5p6450_init_clocks(int xtal); - -extern void s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -#else -#define s5p6450_init_clocks NULL -#define s5p6450_init_uarts NULL -#define s5p6450_map_io NULL -#define s5p64x0_init NULL -#endif - -/* S5P6450 timer */ - -extern struct sys_timer s5p6450_timer; diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-s5p/include/plat/s5pc100.h deleted file mode 100644 index 5f6099dd7cad..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5pc100.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5pc100.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pc100 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PC100 related SoCs */ - -extern void s5pc100_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pc100_register_clocks(void); -extern void s5pc100_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PC100 - -extern int s5pc100_init(void); -extern void s5pc100_init_irq(void); -extern void s5pc100_map_io(void); -extern void s5pc100_init_clocks(int xtal); - -#define s5pc100_init_uarts s5pc100_common_init_uarts - -#else -#define s5pc100_init_clocks NULL -#define s5pc100_init_uarts NULL -#define s5pc100_map_io NULL -#define s5pc100_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-s5p/include/plat/s5pv210.h deleted file mode 100644 index 6c93a0c78100..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ /dev/null @@ -1,33 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5pv210 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5PV210 related SoCs */ - -extern void s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5pv210_register_clocks(void); -extern void s5pv210_setup_clocks(void); - -#ifdef CONFIG_CPU_S5PV210 - -extern int s5pv210_init(void); -extern void s5pv210_init_irq(void); -extern void s5pv210_map_io(void); -extern void s5pv210_init_clocks(int xtal); - -#define s5pv210_init_uarts s5pv210_common_init_uarts - -#else -#define s5pv210_init_clocks NULL -#define s5pv210_init_uarts NULL -#define s5pv210_map_io NULL -#define s5pv210_init NULL -#endif diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h deleted file mode 100644 index bf5283c2a19d..000000000000 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ /dev/null @@ -1,95 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung System MMU driver for S5P platform - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM__PLAT_SYSMMU_H -#define __ASM__PLAT_SYSMMU_H __FILE__ - -enum S5P_SYSMMU_INTERRUPT_TYPE { - SYSMMU_PAGEFAULT, - SYSMMU_AR_MULTIHIT, - SYSMMU_AW_MULTIHIT, - SYSMMU_BUSERROR, - SYSMMU_AR_SECURITY, - SYSMMU_AR_ACCESS, - SYSMMU_AW_SECURITY, - SYSMMU_AW_PROTECTION, /* 7 */ - SYSMMU_FAULTS_NUM -}; - -#ifdef CONFIG_S5P_SYSTEM_MMU - -#include <mach/sysmmu.h> - -/** - * s5p_sysmmu_enable() - enable system mmu of ip - * @ips: The ip connected system mmu. - * #pgd: Base physical address of the 1st level page table - * - * This function enable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_enable(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_disable() - disable sysmmu mmu of ip - * @ips: The ip connected system mmu. - * - * This function disable system mmu to transfer address - * from virtual address to physical address - */ -void s5p_sysmmu_disable(sysmmu_ips ips); - -/** - * s5p_sysmmu_set_tablebase_pgd() - set page table base address to refer page table - * @ips: The ip connected system mmu. - * @pgd: The page table base address. - * - * This function set page table base address - * When system mmu transfer address from virtaul address to physical address, - * system mmu refer address information from page table - */ -void s5p_sysmmu_set_tablebase_pgd(sysmmu_ips ips, unsigned long pgd); - -/** - * s5p_sysmmu_tlb_invalidate() - flush all TLB entry in system mmu - * @ips: The ip connected system mmu. - * - * This function flush all TLB entry in system mmu - */ -void s5p_sysmmu_tlb_invalidate(sysmmu_ips ips); - -/** s5p_sysmmu_set_fault_handler() - Fault handler for System MMUs - * @itype: type of fault. - * @pgtable_base: the physical address of page table base. This is 0 if @ips is - * SYSMMU_BUSERROR. - * @fault_addr: the device (virtual) address that the System MMU tried to - * translated. This is 0 if @ips is SYSMMU_BUSERROR. - * Called when interrupt occurred by the System MMUs - * The device drivers of peripheral devices that has a System MMU can implement - * a fault handler to resolve address translation fault by System MMU. - * The meanings of return value and parameters are described below. - - * return value: non-zero if the fault is correctly resolved. - * zero if the fault is not handled. - */ -void s5p_sysmmu_set_fault_handler(sysmmu_ips ips, - int (*handler)(enum S5P_SYSMMU_INTERRUPT_TYPE itype, - unsigned long pgtable_base, - unsigned long fault_addr)); -#else -#define s5p_sysmmu_enable(ips, pgd) do { } while (0) -#define s5p_sysmmu_disable(ips) do { } while (0) -#define s5p_sysmmu_set_tablebase_pgd(ips, pgd) do { } while (0) -#define s5p_sysmmu_tlb_invalidate(ips) do { } while (0) -#define s5p_sysmmu_set_fault_handler(ips, handler) do { } while (0) -#endif -#endif /* __ASM_PLAT_SYSMMU_H */ diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-s5p/include/plat/system-reset.h deleted file mode 100644 index f307f34e6422..000000000000 --- a/arch/arm/plat-s5p/include/plat/system-reset.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/arch/arm/plat-s5p/include/plat/system-reset.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Based on arch/arm/mach-s3c2410/include/mach/system-reset.h - * - * S5P - System define for arch_reset() - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <plat/watchdog-reset.h> - -void (*s5p_reset_hook)(void); - -static void arch_reset(char mode, const char *cmd) -{ - /* SWRESET support in s5p_reset_hook() */ - - if (s5p_reset_hook) - s5p_reset_hook(); - - /* Perform reset using Watchdog reset - * if there is no s5p_reset_hook() - */ - - arch_wdt_reset(); -} diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-s5p/include/plat/usb-phy.h deleted file mode 100644 index 6dd6bcfca3ce..000000000000 --- a/arch/arm/plat-s5p/include/plat/usb-phy.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics Co.Ltd - * Author: Joonyoung Shim <jy0922.shim@samsung.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PLAT_S5P_USB_PHY_H -#define __PLAT_S5P_USB_PHY_H - -enum s5p_usb_phy_type { - S5P_USB_PHY_DEVICE, - S5P_USB_PHY_HOST, -}; - -extern int s5p_usb_phy_init(struct platform_device *pdev, int type); -extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); - -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index c65eb791d1bb..1fdfaa4599ce 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -37,7 +37,7 @@ struct s5p_gpioint_bank { int start; int nr_groups; int irq; - struct s3c_gpio_chip **chips; + struct samsung_gpio_chip **chips; void (*handler)(unsigned int, struct irq_desc *); }; @@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); for (group = 0; group < bank->nr_groups; group++) { - struct s3c_gpio_chip *chip = bank->chips[group]; + struct samsung_gpio_chip *chip = bank->chips[group]; if (!chip) continue; @@ -110,7 +110,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; @@ -131,7 +131,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) return -EINVAL; if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * bank->nr_groups, GFP_KERNEL); if (!bank->chips) return -ENOMEM; @@ -174,7 +174,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) int __init s5p_register_gpio_interrupt(int pin) { - struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); int offset, group; int ret; diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S new file mode 100644 index 000000000000..0fd591bfc9fd --- /dev/null +++ b/arch/arm/plat-s5p/sleep.S @@ -0,0 +1,49 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common S5P Sleep Code + * Based on S3C64XX sleep code by: + * Ben Dooks, (c) 2008 Simtec Electronics + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> + + .text + + /* + * sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s3c_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* + * s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + b cpu_resume |