summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-s3c24xx/sleep.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-s3c24xx/sleep.S')
-rw-r--r--arch/arm/plat-s3c24xx/sleep.S57
1 files changed, 4 insertions, 53 deletions
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e88d2..fd7032f84ae7 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
/* s3c_cpu_save
*
* entry:
- * r0 = save address (virtual addr of s3c_sleep_save_phys)
+ * r1 = v:p offset
*/
ENTRY(s3c_cpu_save)
stmfd sp!, { r4 - r12, lr }
-
- @@ store co-processor registers
-
- mrc p15, 0, r4, c13, c0, 0 @ PID
- mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ translation table base address
- mrc p15, 0, r7, c1, c0, 0 @ control register
-
- stmia r0, { r4 - r13 }
-
- @@ write our state back to RAM
- bl s3c_pm_cb_flushcache
+ ldr r3, =resume_with_mmu
+ bl cpu_suspend
@@ jump to final code to send system to sleep
ldr r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@ resume_with_mmu:
.ltorg
- @@ the next bits sit in the .data segment, even though they
- @@ happen to be code... the s3c_sleep_save_phys needs to be
- @@ accessed by the resume code before it can restore the MMU.
- @@ This means that the variable has to be close enough for the
- @@ code to read it... since the .text segment needs to be RO,
- @@ the data segment can be the only place to put this code.
-
- .data
-
- .global s3c_sleep_save_phys
-s3c_sleep_save_phys:
- .word 0
-
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
@@ -100,10 +76,6 @@ s3c_sleep_save_phys:
/* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume)
beq 1001b
#endif /* CONFIG_DEBUG_RESUME */
- mov r1, #0
- mcr p15, 0, r1, c8, c7, 0 @@ invalidate I & D TLBs
- mcr p15, 0, r1, c7, c7, 0 @@ invalidate I & D caches
-
- ldr r0, s3c_sleep_save_phys @ address of restore block
- ldmia r0, { r4 - r13 }
-
- mcr p15, 0, r4, c13, c0, 0 @ PID
- mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
- mov r3, #'R'
- strb r3, [ r2, #S3C2410_UTXH ]
-#endif
-
- ldr r2, =resume_with_mmu
- mcr p15, 0, r7, c1, c0, 0 @ turn on MMU, etc
- nop @ second-to-last before mmu
- mov pc, r2 @ go back to virtual address
-
- .ltorg
+ b cpu_resume