diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat/usb.h')
| -rw-r--r-- | arch/arm/plat-omap/include/plat/usb.h | 196 |
1 files changed, 2 insertions, 194 deletions
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 762eeb0626c1..548a4c8d63df 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -44,6 +44,8 @@ struct usbhs_omap_board_data { struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; @@ -64,26 +66,6 @@ struct usbhs_omap_platform_data { }; /*-------------------------------------------------------------------------*/ -#define OMAP1_OTG_BASE 0xfffb0400 -#define OMAP1_UDC_BASE 0xfffb4000 -#define OMAP1_OHCI_BASE 0xfffba000 - -#define OMAP2_OHCI_BASE 0x4805e000 -#define OMAP2_UDC_BASE 0x4805e200 -#define OMAP2_OTG_BASE 0x4805e300 - -#ifdef CONFIG_ARCH_OMAP1 - -#define OTG_BASE OMAP1_OTG_BASE -#define UDC_BASE OMAP1_UDC_BASE -#define OMAP_OHCI_BASE OMAP1_OHCI_BASE - -#else - -#define OTG_BASE OMAP2_OTG_BASE -#define UDC_BASE OMAP2_UDC_BASE -#define OMAP_OHCI_BASE OMAP2_OHCI_BASE - struct omap_musb_board_data { u8 interface_type; u8 mode; @@ -107,44 +89,6 @@ extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); -/* - * NOTE: Please update omap USB drivers to use ioremap + read/write - */ - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) - -static inline u8 omap_readb(u32 pa) -{ - return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u16 omap_readw(u32 pa) -{ - return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline u32 omap_readl(u32 pa) -{ - return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writeb(u8 v, u32 pa) -{ - __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); -} - - -static inline void omap_writew(u16 v, u32 pa) -{ - __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); -} - -static inline void omap_writel(u32 v, u32 pa) -{ - __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); -} - #endif extern void am35x_musb_reset(void); @@ -153,142 +97,6 @@ extern void am35x_musb_clear_irq(void); extern void am35x_set_mode(u8 musb_mode); extern void ti81xx_musb_phy_power(u8 on); -/* - * FIXME correct answer depends on hmc_mode, - * as does (on omap1) any nonzero value for config->otg port number - */ -#ifdef CONFIG_USB_GADGET_OMAP -#define is_usb0_device(config) 1 -#else -#define is_usb0_device(config) 0 -#endif - -void omap_otg_init(struct omap_usb_config *config); - -#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) -void omap1_usb_init(struct omap_usb_config *pdata); -#else -static inline void omap1_usb_init(struct omap_usb_config *pdata) -{ -} -#endif - -#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) -void omap2_usbfs_init(struct omap_usb_config *pdata); -#else -static inline void omap2_usbfs_init(struct omap_usb_config *pdata) -{ -} -#endif - -/*-------------------------------------------------------------------------*/ - -/* - * OTG and transceiver registers, for OMAPs starting with ARM926 - */ -#define OTG_REV (OTG_BASE + 0x00) -#define OTG_SYSCON_1 (OTG_BASE + 0x04) -# define USB2_TRX_MODE(w) (((w)>>24)&0x07) -# define USB1_TRX_MODE(w) (((w)>>20)&0x07) -# define USB0_TRX_MODE(w) (((w)>>16)&0x07) -# define OTG_IDLE_EN (1 << 15) -# define HST_IDLE_EN (1 << 14) -# define DEV_IDLE_EN (1 << 13) -# define OTG_RESET_DONE (1 << 2) -# define OTG_SOFT_RESET (1 << 1) -#define OTG_SYSCON_2 (OTG_BASE + 0x08) -# define OTG_EN (1 << 31) -# define USBX_SYNCHRO (1 << 30) -# define OTG_MST16 (1 << 29) -# define SRP_GPDATA (1 << 28) -# define SRP_GPDVBUS (1 << 27) -# define SRP_GPUVBUS(w) (((w)>>24)&0x07) -# define A_WAIT_VRISE(w) (((w)>>20)&0x07) -# define B_ASE_BRST(w) (((w)>>16)&0x07) -# define SRP_DPW (1 << 14) -# define SRP_DATA (1 << 13) -# define SRP_VBUS (1 << 12) -# define OTG_PADEN (1 << 10) -# define HMC_PADEN (1 << 9) -# define UHOST_EN (1 << 8) -# define HMC_TLLSPEED (1 << 7) -# define HMC_TLLATTACH (1 << 6) -# define OTG_HMC(w) (((w)>>0)&0x3f) -#define OTG_CTRL (OTG_BASE + 0x0c) -# define OTG_USB2_EN (1 << 29) -# define OTG_USB2_DP (1 << 28) -# define OTG_USB2_DM (1 << 27) -# define OTG_USB1_EN (1 << 26) -# define OTG_USB1_DP (1 << 25) -# define OTG_USB1_DM (1 << 24) -# define OTG_USB0_EN (1 << 23) -# define OTG_USB0_DP (1 << 22) -# define OTG_USB0_DM (1 << 21) -# define OTG_ASESSVLD (1 << 20) -# define OTG_BSESSEND (1 << 19) -# define OTG_BSESSVLD (1 << 18) -# define OTG_VBUSVLD (1 << 17) -# define OTG_ID (1 << 16) -# define OTG_DRIVER_SEL (1 << 15) -# define OTG_A_SETB_HNPEN (1 << 12) -# define OTG_A_BUSREQ (1 << 11) -# define OTG_B_HNPEN (1 << 9) -# define OTG_B_BUSREQ (1 << 8) -# define OTG_BUSDROP (1 << 7) -# define OTG_PULLDOWN (1 << 5) -# define OTG_PULLUP (1 << 4) -# define OTG_DRV_VBUS (1 << 3) -# define OTG_PD_VBUS (1 << 2) -# define OTG_PU_VBUS (1 << 1) -# define OTG_PU_ID (1 << 0) -#define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ -# define DRIVER_SWITCH (1 << 15) -# define A_VBUS_ERR (1 << 13) -# define A_REQ_TMROUT (1 << 12) -# define A_SRP_DETECT (1 << 11) -# define B_HNP_FAIL (1 << 10) -# define B_SRP_TMROUT (1 << 9) -# define B_SRP_DONE (1 << 8) -# define B_SRP_STARTED (1 << 7) -# define OPRT_CHG (1 << 0) -#define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ - // same bits as in IRQ_EN -#define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ -# define OTGVPD (1 << 14) -# define OTGVPU (1 << 13) -# define OTGPUID (1 << 12) -# define USB2VDR (1 << 10) -# define USB2PDEN (1 << 9) -# define USB2PUEN (1 << 8) -# define USB1VDR (1 << 6) -# define USB1PDEN (1 << 5) -# define USB1PUEN (1 << 4) -# define USB0VDR (1 << 2) -# define USB0PDEN (1 << 1) -# define USB0PUEN (1 << 0) -#define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ -#define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ - -/*-------------------------------------------------------------------------*/ - -/* OMAP1 */ -#define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) -# define CONF_USB2_UNI_R (1 << 8) -# define CONF_USB1_UNI_R (1 << 7) -# define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) -# define CONF_USB0_ISOLATE_R (1 << 3) -# define CONF_USB_PWRDN_DM_R (1 << 2) -# define CONF_USB_PWRDN_DP_R (1 << 1) - -/* OMAP2 */ -# define USB_UNIDIR 0x0 -# define USB_UNIDIR_TLL 0x1 -# define USB_BIDIR 0x2 -# define USB_BIDIR_TLL 0x3 -# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) -# define USBT2TLL5PI (1 << 17) -# define USB0PUENACTLOI (1 << 16) -# define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) |